Environmental and economic life cycle assessment for sewage sludge treatment processes in Japan

Evaluating energy balance and environmental footprint of sludge management in BRICS countries

Climate change is driving global endeavours to achieve carbon neutrality and renewable energy expansion. Sludge, a nutrient-rich waste, holds energy potential yet poses environmental challenges that need proper management. We conducted a comprehensive life cycle assessment to evaluate the energy balance and environmental footprint of the most commonly used sludge management scenarios in BRICS countries, namely Brazil, Russia, India, China, and South Africa. Technologies such as incineration and anaerobic digestion with energy recovery units (i.e., cogeneration unit) maximize energy balance and minimize the environmental footprint, with incineration showing a superior performance. Shifting sludge management scenarios from the worst to the best can boost energy production by 1.4-98.4 times and cut the environmental footprint by 1.5-21.4 times. In 2050, these improvements could lead to a 98-fold boost in energy generation and a 25-fold drop in carbon emissions, according to the Announced Pledges Scenarios. Optimizing parameters such as volatile solids and anaerobic digestion efficiency further boosts energy output and minimizes the environmental footprint. This study offers robust evidence to support sustainable sludge management and thus promote energy recovery and carbon neutrality goals, guide technological transitions, and inform policymaking for sustainable development.

Life cycle assessment of alternative pulp mill sludge treatment methods in Finland

Proper management of wastewater treatment plant side streams in pulp and paper mills is a matter of great interest. This study evaluates the environmental impact of different strategies in the management of biosludge from pulp and paper mills in Finland through a Life Cycle Assessment methodology. The base industrial standard practice, biosludge incineration for energy recovery and ash landfill disposal (Scenario 1), was compared to the alternative process of hydrothermal carbonization. The hydrochar generated from hydrothermal carbonization was evaluated for energy recovery through incineration (Scenario 2), or for use in composting for nutrient recovery (Scenario 3). The results showed that the hydrothermal process improved the overall environmental performance of the sludge management, particularly in terms of energy consumption and greenhouse gas emissions. The use of hydrochar as a soil amendment in composting also resulted in a significant reduction on the environmental impact compared to the other two scenarios. Overall, this study highlights the potential of hydrothermal carbonization and hydrochar utilization as sustainable options for managing biosludge from pulp mills.

From waste management to circular economy: Leveraging thermophiles for sustainable growth and global resource optimization

Waste of any origin is one of the most serious global and man-made concerns of our day. It causes climate change, environmental degradation, and human health problems. Proper waste management practices, including waste reduction, safe handling, and appropriate treatment, are essential to mitigate these consequences. It is thus essential to implement effective waste management strategies that reduce waste at the source, promote recycling and reuse, and safely dispose of waste. Transitioning to a circular economy with policies involving governments, industries, and individuals is essential for sustainable growth and waste management. The review focuses on diverse kinds of environmental waste sources around the world, such as residential, industrial, commercial, municipal services, electronic wastes, wastewater sewerage, and agricultural wastes, and their challenges in efficiently valorizing them into useful products. It highlights the need for rational waste management, circularity, and sustainable growth, and the potential of a circular economy to address these challenges. The article has explored the role of thermophilic microbes in the bioremediation of waste. Thermophiles known for their thermostability and thermostable enzymes, have emerged to have diverse applications in biotechnology and various industrial processes. Several approaches have been explored to unlock the potential of thermophiles in achieving the objective of establishing a zero-carbon sustainable bio-economy and minimizing waste generation. Various thermophiles have demonstrated substantial potential in addressing different waste challenges. The review findings affirm that thermophilic microbes have emerged as pivotal and indispensable candidates for harnessing and valorizing a range of environmental wastes into valuable products, thereby fostering the bio-circular economy.

Sustainable valorization of macroalgae residual biomass, optimization of pyrolysis parameters and life cycle assessment

The major challenges for the current climate change issue are an increase in global energy demand, a limited supply of fossil fuels, and increasing carbon footprints from fossil fuels, which have necessitated the exploration of sustainable alternatives to fossil fuels. Biorefineries offer a promising path to sustainable fuel production, converting biomass into biofuels using diverse technologies. Aquatic biomass, such as macroalgae in this context, represents an abundant and renewable biomass resource that can be cultivated from water bodies without competing with traditional agricultural land. Despite this, the potential of macroalgae for biofuel production remains largely untapped, with very limited studies addressing their viability and efficiency. This study investigates the efficient conversion of unexplored macroalgae biomass through a biorefinery process that involves lipid extraction to produce biodiesel, along with the production of biochar and bio-oil from the pyrolysis of residual biomass. To improve the effectiveness and overall performance of the pyrolysis system, Response Surface Methodology (RSM) was utilized through a Box-Behnken design to systematically investigate how alterations in temperature, reaction time, and catalyst concentration influence the production of bio-oil and biochar to maximize their yields. The results showed the highest bio-oil yield achieved to be 36 %, while the highest biochar yield reached 45 %. The integration of Life Cycle Assessment (LCA) in the study helps to assess carbon emission and environmental burdens and identify potential areas for optimization, such as resource efficiency, waste management, and energy utilization. The LCA results contribute to the identification of potential environmental hotspots and guide the development of strategies to optimize the overall sustainability of the biofuel production process. The LCA results indicate that the solvent (chloroform) used in transesterification contributes significantly to greenhouse gas emissions and climate change impacts. Therefore, it is crucial to explore alternative, safe solvents that can mitigate the environmental impacts of transesterification.

Innovative approach for predicting biogas production from large-scale anaerobic digester using long-short term memory (LSTM) coupled with genetic algorithm (GA)

An artificial neural network (ANN) model called long-short term memory (LSTM), coupled with a genetic algorithm (GA) for feature selection, was used to predict biogas production of large-scale anaerobic digesters (ADs) of Tehran South Wastewater Treatment Plant (Iran), with a biogas production of approximately 30,000 Nm3/d. In order to employ the real conditions, the hydraulic retention time (HRT) of the ADs (21 days) was considered as the LSTM look-back window. To evaluate the model predictions, three different scenarios were defined. In the first scenario, the model predicted the produced biogas by using raw wastewater characteristics and reached the coefficient of determination of R2 = 0.84. The GA selected four out of eleven parameters of raw wastewater, including loads of BOD5, COD, TSS, and TN (kg/d), as the most informative data for the model. In the second scenario, the model predicted the produced biogas by employing the data of the thickened sludge streams entering the ADs and yielded a higher accuracy (R2 = 0.89). In this scenario, GA selected two out of six parameters of the sludge streams, including total flow rate (m3/d) and average solids content (w/w%). Finally, in the third scenario, by putting the parameters of the two previous scenarios together, the model's prediction accuracy increased slightly (R2 = 0.90). The results demonstrated that the GA-LSTM modeling technique could achieve reliable performance in predicting biogas production of large-scale ADs by including HRT in modeling procedure. It was also found that the raw wastewater characteristics severely affect AD behavior and can be successfully used as the input data of the AD models.

Wastewater recovery for sustainable agricultural systems in the circular economy - A systematic literature review of Life Cycle Assessments

Water availability and quality are known to affect agricultural production and nutrition. The aim of this study was to elaborate a systematic literature review of the most sustainable ways of wastewater treatment towards achieving circular economy (CE) in agro-industry activities. From the SLR, the authors selected twenty-seven papers that they classified into the three research themes of recovery of wastewater into irrigation water, extraction of sludge for production of bio-based compounds, and recovery of nutrients for soil amendment, including recovering of feeds for aquaculture, and recovery of nutrient biosolids for soil amendment. Results underlined that the recovery of nutrients biosolids for soil amendment can generate a GWP gain up to - 37 kg CO2-eq. So, the review highlighted that wastewater recovery for multiple purposes can be truly effective for the environmental sustainability of agricultural systems, and that LCA is a valid tool to assess and improve that sustainability. Under this perspective, this SLR's findings can stimulate public administrations at national and local scales in their planning and funding activities towards implementing circular bioeconomy paths based upon wastewater recovery for a sustainable, resilient agriculture. Overall, the authors believe that their article was effective in overviewing the current wastewater recovery paths in the CE context, and in highlighting key methodological aspects and findings of the reviewed LCAs, to advance the specialised literature and knowledge, and to guide practitioners for future LCA applications in the field. Finally, through its main findings, the article effectively contributes to the whole research project which it is part of and which the authors are deeply involved in. That research is performed under the Progetto GRINS "Growing Resilient, Inclusive and Sustainable" thanks to a PNRR M4C2- Investment 1.3 - GRINS with the aim of "Building a dataset for the circular economy of the main Italian production systems".

Enhanced methanogenic degradation and membrane fouling associated with protein-EPS by extending sludge retention time in a high-solid anaerobic membrane bioreactor treating concentrated organic sludge

The improvement of organic sludge destruction efficiency and methanogenic performance is a key concern during anaerobic digestion toward maximum energy recovery. In this study, a high-solid anaerobic membrane bioreactor (AnMBR) was operated continuously for the treatment of organic sludge from Japanese small-scale collective wastewater treatment facility (Johkasou), and digestion efficiency was enhanced by the optimizing solid retention time (SRT). Degradation efficiency of the substrate improved from 36 % to 52 % and the biogas yield was enhanced from 0.37 to 0.51 L/g-VSfed when the SRT was extended from 30 to 60 d. The net energy yield of AnMBR at SRT 60 days was 9.83 kJ/g-VSfed, and the corresponding energy sufficiency ratio was 181 %, indicating that SRT extension could enhance substrate destruction with significant energy recovery potential. However, a long SRT is characterized by high mixed liquor total solids (MLTS), small particle size, high extracellular polymeric substances content, and poor filterability, which exert detrimental effects on membrane operation. Membrane fouling was effectively controlled by regulating the flux at a sustainable rate. The low fouling region and transition region of operating flux were determined as 0.21-4.6 L/m2/h (LMH) and 1.5-5.7 LMH, respectively, when MLTS was 25-50 g/L, and the main contributors to membrane fouling were high protein fractions and small sludge flocs. The current study proposes a promising method to promote digestion efficiency and provided adequate guidance for membrane operation at super-high MLTS by presenting practical engineering applications of AnMBRs in solid waste treatment.

Thermal hydrolysis of sewage sludge: Improvement in biogas generation and prediction of global warming potential

Anaerobic digestion (AD) is a prominent treatment method for the sludge produced from sewage treatment plants. Poor solid reduction and longer retention time are the main drawbacks of AD. Thermal hydrolysis (TH) is a potential pretreatment method for solubilization of sewage sludge (SS) solids thereby improving biogas production during AD post-treatment. In this study, the SS sample (total solids = 1.75 wt% and total chemical oxygen demand (COD) = 15,450 mg L-1) was subjected to TH pretreatment (temperature = 140-180°C and reaction time = 60 minutes) in a 0.7-L capacity stainless-steel high-pressure reactor. At a reaction temperature of 180°C, the maximum solid solubilization (total dissolved solids = 4652 mg L-1) and improved dewaterability (time to filter = 4.7 s.L g-1) were observed. The biochemical methane potential test results showed almost doubling of methane generation from 145 to 284 mL gCOD-1 after TH pretreatment at 180°C. The life cycle assessment approach was used to compare various SS treatment and disposal scenarios, two of which included hydrothermal pretreatment. The scenarios involving hydrothermal pretreatments showed the least global warming potential.

Life-cycle analysis of environmental loads from household septic systems in Japan focusing on effluent water discharge

Various types of small-scale wastewater treatment systems are widely used in rural areas, and life-cycle assessment (LCA) should be performed to evaluate their environmental performance. In this study, septic systems were first classified into five categories based on their wastewater treatment performance. Effluent samples from actual systems were collected, and their water qualities were determined. A model to evaluate the environmental load from the septic systems using LCA methods was then established. The water-quality values obtained were input to the model, and the life-cycle environmental costs of the classified septic systems were calculated. The mean environmental load of the effluent during the operation stage was 37.6%, confirming that evaluation of an effluent discharge inventory using LCA, inspection, and water-quality monitoring to improve operations is critical for reducing the environmental load. The operation stage accounts for over 99% of the involved eutrophication, biological toxicity, and toxic chemicals, which are strongly related to the quality of the effluent. Evaluation of the effluent discharge inventory using LCA is of great significance, even for small-scale wastewater treatment systems. The set of procedures developed in this study can be used to calculate comprehensive environmental impacts at wastewater treatment plants.

A Critical Review of Data Science Applications in Resource Recovery and Carbon Capture from Organic Waste

Municipal and agricultural organic waste can be treated to recover energy, nutrients, and carbon through resource recovery and carbon capture (RRCC) technologies such as anaerobic digestion, struvite precipitation, and pyrolysis. Data science could benefit such technologies by improving their efficiency through data-driven process modeling along with reducing environmental and economic burdens via life cycle assessment (LCA) and techno-economic analysis (TEA), respectively. We critically reviewed 616 peer-reviewed articles on the use of data science in RRCC published during 2002-2022. Although applications of machine learning (ML) methods have drastically increased over time for modeling RRCC technologies, the reviewed studies exhibited significant knowledge gaps at various model development stages. In terms of sustainability, an increasing number of studies included LCA with TEA to quantify both environmental and economic impacts of RRCC. Integration of ML methods with LCA and TEA has the potential to cost-effectively investigate the trade-off between efficiency and sustainability of RRCC, although the literature lacked such integration of techniques. Therefore, we propose an integrated data science framework to inform efficient and sustainable RRCC from organic waste based on the review. Overall, the findings from this review can inform practitioners about the effective utilization of various data science methods for real-world implementation of RRCC technologies.

Revisiting China's domestic greenhouse gas emission from wastewater treatment: A quantitative process life-cycle assessment

The wastewater treatment industry could alleviate water pollution but consume a large amount of energy and resources. China has over 5000 centralized domestic wastewater treatment plants and produces an unignorable amount of greenhouse gases (GHG). By considering the wastewater treatment, wastewater discharge, and sludge disposal processes, and employing the modified process-based quantification method, this study quantifies wastewater treatment's on-site and off-site GHG emissions across China. Results showed that the total GHG emission was 67.07 Mt CO₂-eq in 2017, with approximately 57% of on-site emissions. The top seven cosmopolis and metropolis (top 1%) emitted nearly 20% of the total GHG emission, while their emission intensity was relatively low due to the huge population. This means that a high urbanization rate may be a feasible way to mitigate GHG emissions in the wastewater treatment industry in the future. Furthermore, GHG reduction strategies can also focus on process optimization and improvement at WWTPs as well as the nationwide promotion of onsite thermal conversion technologies for sludge management.

Evaluation of impact of sludge types and solids content on sludge treatment using microwave enhanced advanced oxidation process

The microwave enhanced advanced oxidation process (MW-AOP) has been applied to pre-treat different sludge types and high solids content. Secondary sludge not only had the highest solids and nutrient content but also yielded higher treatment efficiency than primary or mixed sludge. In the case of secondary sludge with 4% total solids (TS), the total suspended solids (TSS) concentration was reduced by 32% while soluble chemical oxygen demand concentration increased from 1% to 40% after treatment at 110°C. A high level of nutrient release was also achieved; about 65% total phosphate (TP) solubilized at 110°C. The degree of secondary sludge disintegration was dictated by temperature and hydrogen peroxide dosage. The optimal operating temperature for the system was 110°C, and sludge containing TS up to 8% was treated effectively. Secondary sludge with 8% TS had a TSS reduction of 41% after treatment at 110°C while COD solubilization was about 45%; about 55% TP was solubilized at 10 min holding time. Treatment of sludge with higher solids content would allow for handling larger amounts of sludge at a given period and reduce heating cost per unit of treated sludge. The inter-relationship between the degree of sludge disintegration and changes in chemical and physical properties was also clearly demonstrated here. The treated sludge would be an ideal substrate for anaerobic digestion or phosphorous recovery processes. High levels of nutrients (phosphorus and nitrogen) and metal release, and solids disintegration from sludge containing high solids content would make subsequent resource recovery processes more effective and economical.

Sustainability analysis of implementing sludge reduction in overall sludge management process: Where do we stand?

Sustainable sludge management has significance due to the great potential of recovering energy and resources, potentially achieving carbon neutrality and energy positivity in the process. However, whether the sludge reduction strategy really benefits the aim of a sustainable sludge management process requires a holistic analysis. In this study, nine scenarios involving different sludge management strategies with or without sludge reduction methods were environmentally and economically assessed to clarify the necessity of adopting a sludge reduction or not. Results reveal that direct sludge incineration without prior in-plant sludge reduction generates the least environmental impacts (less than 25-120 %), but it increases operation costs by 103-110 % compared to landfilling with prior in-plant sludge reduction. Chemical Oxygen Demand flows indicate that direct sludge incineration is superior in converting organic matter into energy compared to employing sludge reduction followed by landfilling or land application. This converted energy offsets environmental impacts from electricity consumption, but these electricity benefits are insignificant in the overall cost. Case studies suggest that direct sludge incineration could facilitate potential nutrient and energy recovery, especially for metropolis. While sludge reduction strategies are more suited for developing regions relying on landfills or land application, to lower the economic burdens. The findings of this study tend to shed light on the decision-making of adopting sludge reduction strategies and sustainable sludge management.

The GHG mitigation opportunity of sludge management in China

Greenhouse gas (GHG) mitigation in wastewater treatment sector is indispensable in China's carbon neutral target. As an important component of wastewater system, sludge generation is rapidly increased with the acceleration of urbanization in China. It is crucial to investigate the carbon footprint of various sludge management strategies and quantify the potential optimization of GHG reduction effect at national scale. Therefore, this study conducted a comprehensive analysis of sludge distribution and GHG profiles of various sludge systems. The overall dry sludge generation in China is 12.15 Mt, with spatial resolution at city level. Different sludge treatment options were categorized into four types: energy recovery, nutrient recovery (e.g. phosphorus and nitrogen), material valorisation (e.g. brick, biochar) and conventional disposal. With various sludge treatment options, the GHG profile of annual sludge management in China ranges from -35.86 Mt/year to 57.11 Mt/year. The best GHG mitigation can be achieved through energy recovery by co-incineration system and the greatest reduction opportunity is concentrated in highly urbanized regions, such as Yangtze River Delta, Pearl River Delta, and Beijing-Tianjin-Hebei urban agglomerations.

Ecological risk assessment of toxic metal(loid)s for land application of sewage sludge in China

Sewage sludge, including those after biological or thermochemical treatments, has the potential to be used as fertilizers for recycle of resources. However, its potential ecological risk is also of great concern to policy making. This study employed comprehensive ecological risk assessment (ERA) methods to evaluate the risk caused by the toxic metal(loid)s in sewage sludge throughout China. The conventional geo-accumulation index and potential ecological risk index revealed that cadmium (Cd) and mercury (Hg) were of significant concern in treating sewage sludge before land application, but chromium (Cr) and zinc (Zn) were preferred by potential affected proportion (PAF) and overall risk probability (ORP) of species sensitivity distribution (SSD). Because SSD considered both the community and the ecotoxicity of toxic metal(loid)s, it was more advantageous and promising in assessing ecological risks caused by land application of sewage sludge. Based on the predicted no-effect concentration (PNEC) of toxic metal(loid) calculated by hazardous concentration that cause death of 50% of species (HC50) by SSD, the maximum allowable disposal amount (MADA) of sewage sludge in the whole China indicated that chromium (Cr) should be totally eliminated because of its high risks in the present background soil. After excluding Cr, the MADA of sewage sludge in China was 3.24 × 10⁶ t and 6.47 × 10⁷ t under land application scenarios with high and low ecological risks, respectively. Additionally, the MADA could be increased by mixing sewage sludge with deeper soil in wider areas. This study emphasized that local laws and regulations on land application of sewage sludge and the subsequent ERA system need to be addressed in the future.

Environmental and Economic Implication of Implementation Scale of Sewage Sludge Recycling Systems Considering Carbon Trading Price

With China’s ongoing economic development and increasing emphasis on environmental protection, the number and treatment capacity of sewage plants is increasing annually. Simultaneously, sludge production is increasing. In recent years, researchers have investigated various approaches to the environmental and economic analysis of sludge treatment and recycling systems (STRS). These investigations did not take the universal law of different capacities for environmental impact and STRS economics into account. The aim of this study was to analyze the scale effect of STRS with different technologies (i.e., incineration, aerobic composting, used in material (brick), anaerobic digestion) on the environment and economy. Moreover, the cost–benefit impact of introducing a carbon- trading mechanism into the STRS to achieve carbon neutrality was analyzed. After reducing carbon emissions through by-products of STRS, the carbon emission quota can be sold, which will generate income. The results show that the break-even scales for incineration, anaerobic composting, used in building material (brick), and anaerobic digestion are 54,899, 6707, 48,775, and 4425 t/y, respectively. The break-even scale of each system decreased after the introduction of the carbon trading system into the STRS. These findings could provide critical technical information for superior decision-making in sewage sludge recycling systems.

Beyond Traditional Energy Sector Coupling: Conserving and Efficient Use of Local Resources

Decentralisation and sector coupling are becoming increasingly crucial for the decarbonisation of the energy system. Resources such as waste and water have high energy recovery potential and are required as inputs for various conversion technologies; however, waste and water have not yet been considered in sector coupling approaches but only in separate examinations. In this work, an open-source sector coupling optimisation model considering all of these resources and their utilisation is developed and applied in a test-bed in an Israeli city. Our investigations include an impact assessment of energy recovery and resource utilisation in the transition to a hydrogen economy, with regard to the inclusion of greywater and consideration of emissions. Additionally, sensitivity analyses are performed in order to assess the complexity level of energy recovery. The results demonstrate that waste and water energy recovery can provide high contributions to energy generation. Furthermore, greywater use can be vital to cover the water demands in scarcity periods, thus saving potable water and enabling the use of technology. Regarding the transition to hydrogen technologies, resource energy recovery and management have an even higher effect than in the original setup. However, without appropriate resource management, a reduction in emissions cannot be achieved. Furthermore, the sensitivity analyses indicate the existence of complex relationships between energy recovery technologies and other energy system operations.

Environmental Life Cycle Assessment of Hydrothermal Carbonization of Sewage Sludge and Its Products Valorization Pathways

ABSTRACT

This study is aimed at evaluating through Life Cycle Assessment (LCA) the environmental performances of an integrated system of an existing Water Resources Recovery Facility (WRRF) and a hypothetical hydrothermal carbonization (HTC) plant applied to the generated sewage sludge (SS). Beside the valorisation of the solid product (hydrochar, HC) as a fuel substituting lignite, the possibility to valorize also the liquid fraction (process water, PW) derived by the HTC, by anaerobic digestion to produce biogas, is here proposed and analysed. Additionally, phosphorus recovery from HC, prior its use, by acid leaching with nitric acid is also suggested and evaluated. Thus, four integrated scenarios, based on SS carbonization, are proposed and compared with the current SS treatment, based on composting outside of the WRRF (Benchmark scenario). The proposed scenarios, based on HTC, show improved performances with respect to the benchmark one, for thirteen of sixteen considered impact indicators. For the Climate Change (CC) indicator, the two HTC scenarios are able to reduce the impacts up to - 98%, with respect to the Benchmark. Further, the introduction of anaerobic digestion of PW proves to reduce impacts more than other configurations in eleven on sixteen impact categories. On the contrary, the introduction of phosphorus recovery process negatively affects the values for most of indicators. Thus, possible solutions to improve the integration of this process are outlined (e.g., the use of sulfuric acid instead of nitric one, or the application of a different ratio between solid and acidified solution during acid leaching of HC to recover phosphorus).

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s12649-022-01821-x.

Bioremediation of Textile Industrial Effluents Using Nutraceutical Industrial Spent: Laboratory-Scale Demonstration of Circular Economy

This research reports the first-ever study on abundantly available, environmentally friendly, low-cost and ready-for-use Nutraceutical Industrial Cumin Seed Spent (NICUS) as an innovative adsorbent for bioremediation of a bisazo Acid Red 119 (AR119) dye, a probable mutagen from textile industrial effluents (TIEs). The experiment at the laboratory scale is designed to suit the concepts of sustainability and valorisation under the domain of circular economy. The experimental qe value obtained was 96.00 mg g−1. The optimised conditions of parameters are as follows: pH of 2; adsorption time, 210 min; adsorbent dosage, 0.300 g L−1; particle size, 175 µM; initial dye concentration, 950 mg L−1; orbital shaking, 165 rpm and temperature, 50 °C, producing an impressive value of 748 mg of dye adsorbing on 1 g of dry NICUS. The adsorption capacity of NICUS obtained from the quadratic model developed for process optimisation gave values of 748 mg g−1. As a prelude to commercialisation, five variables that affect the adsorption process were experimentally studied. For the feasibility and efficiency of the process, a two-level fractional factorial experimental design (FFED) was applied to identify variables that influence the adsorption capacity of NICUS. The identified variables were applied to scale experiments by three orders. Nine isotherm models were used to analyse the adsorption equilibrium data. The Vieth–Sladek adsorption isotherm model was found to be the best fit. The pseudo-second-order reaction was the appropriate mechanism for the overall rate of the adsorption process. Mechanistic studies related to mass transfer phenomena were more likely to be dominant over the diffusion process. Techniques such as SEM, FTIR and CHN analysis were used to characterise NICUS. The dye-adsorbed NICUS obtained as “sludge” was used as a reinforcing material for the fabrication of composites using plastic waste. The physicomechanical and chemical properties of thermoplastic and thermoset composite using dye-adsorbed NICUS were evaluated and compared with NICUS composites. Prospects of integrating Small and Medium Enterprises (SMEs) into the circular economy of Nutraceutical Industrial Spent (NIS) are discussed.

Life-cycle assessment of two sewage sludge-to-energy systems based on different sewage sludge characteristics: Energy balance and greenhouse gas-emission footprint analysis

Anaerobic digestion and incineration are widely used sewage sludge (SS) treatment and disposal approaches to recovering energy from SS, but it is difficult to select a suitable technical process from the various technologies. In this study, life-cycle assessments were adopted to compare the energy- and greenhouse gas- (GHG) emission footprints of two sludge-to-energy systems. One system uses a combination of AD with incineration (the AI system), whereas the other was simplified by direct incineration (the DI system). Comparison between three SS feedstocks (VS/TS: 57.61 -73.1 ds.%) revealed that the AI system consistently outperformed the DI system. The results of sensitivity analyses showed that the energy and GHG emission performances were mainly affected by VS content of the SS, AD conversion efficiency, and the energy consumption of sludge drying. Furthermore, the energy and GHG emission credit of the two systems increased remarkably with the increase in the VS content of the SS. For the high-organic-content sludge (VS/TS: 55%-80%), the energy and GHG emission credit of the AI system increase with the increase of AD conversion efficiency. However, for the low organic content sludge (VS/TS: 30%-55%), it has the opposite effect. In terms of energy efficiency and GHG performance, the AI system is a good choice for the treatment of high-organic-content sludge (VS/TS>55%), but DI shows superiority over AI when dealing with low organic content sludge (VS/TS<55%).

Biosolids towards Back-To-Earth alternative concept (BEA) for environmental sustainability: a review

Biosolids are a nutrient-rich stable substance obtained during wastewater treatment process. With amplifying population and industrial development, upsurge of biosolid generation is also speculated. Biosolids are endowed with essential plant nutrient (macro- and micro-nutrients) which qualifies them to be used as soil amendment and in turn dwindles the use of chemical fertilizers. The characteristics of biosolid depends on the nature of the treatment process. In this regard, it would be possible to recycle certain nutrients from the agricultural use of biosolids and could be a sustainable solution to the management of this waste. Biosolids may therefore serve as a key tool for farm utilization. It improves the soil health through nutrient supply and promotes the plant growth. Furthermore, they are slow-release fertilizer and hence, restrains from groundwater contamination. This review, in a nutshell, unravels the influence of biosolids on land application, its effect on soil properties, agricultural and horticultural crops, environmental ramification of biosolids in restoring the degraded land and carbon sequestration.

Biochar-cadmium retention and its effects after aging with Hydrogen Peroxide (H2O2)

Cadmium (Cd) is a highly toxic heavy metal that can become available to the environment from a variety of sources. The thermal transformation of organic residues into biochar can be a sustainable way to reduce cadmium environmental availability and, at the same time, a waste management solution. We studied sixteen biochars in two versions: unaged and aged with hydrogen peroxide (H2O2), regarding their Cd retention capacity. Feedstocks used included softwood biochar (SWB), almond shell (ASB), walnut shell (WSB), sewage sludge (SSB), and coconut shell (CSB); production temperatures varied from 450 to 900 °C. The objectives of this research were to understand the role of biochar properties on Cd adsorption rates and to evaluate how properties and adsorption rates vary as a function of H2O2 aging. Feedstock played a more important role than production temperature in determining biochar properties. Cd-adsorption capacity ranged from 0.67 to 415.67 mg/g, and the biochars that adsorbed the most Cd were SSB 700, SWB 800 - i, CSB 600 - m2, ASB 500-1, CSB 600 - m3, WSB 900, and CSB 600. The properties that best explained this variation in Cd retention were ash, sulfur, nitrogen and carbon content. Variation in oxygen content, cation exchange capacity and surface area had less impact of Cd adsorption. The H2O2 aging caused oxygen content to increase in all biochars, but the increase in Cd retention was not significant for the majority of the biochars and aging even reduced the Cd retention in some. Our results may help design biochars with maximized sites for Cd adsorption.

Modern Use of Water Produced by Purification of Municipal Wastewater: A Case Study

All the urban areas of developed countries have hydric distribution grids and sewage systems for collecting municipal wastewater to treatment plants. In this way, the municipal wastewater is purified from human excreta and other minor contaminants while producing excess sludges and purified water. In arid and semi-arid areas of the world, the purified water can be used, before discharging, to enhance the energy efficiency of seawater desalination and solve the problems of marine pollution created by desalination plants. Over the past half-century, seawater desalination has gradually met demand in urbanized, oil-rich, arid areas. At the same time, technological evolution has made it possible to significantly increase the energy efficiency of the plants and reduce the unit cost of the produced water. However, for some years, these trends have flattened out. The purified water passes through the hybridized desalination plant and produces renewable osmotic energy before the final discharge in the sea to restart the descent behaviour. Current technological development of reverse osmosis (RO), pressure retarded osmosis (PRO) and very efficient energy recovery devices (ERDs) allows this. Furthermore, it is reasonable to predict that, in the short-medium term, a new generation of membranes specifically designed for improving the performance of the pressure retarded osmosis will be available. In such circumstances, the presently estimated 13-20% decrease of the specific energy consumption will improve up to more than 30%. With the hybrid plant, the salinity of the final discharged brine is like that of seawater, while the adverse effect of GHG emission will be significantly mitigated.

Life Cycle Assessment of Leachate Treatment Strategies

Increasingly stringent regulations for leachate discharge call for leachate treatment plants (LTPs) to increase their treatment capacity by adopting membrane treatment processes to remove nitrogen and organics beyond conventional biological treatment processes. This study developed four common treatment strategies based on the existing operation and construction conditions of seven representative LTPs in China. We evaluated the LTPs' environmental impacts using life cycle assessment (LCA) following the International Organization for Standardization (ISO 14040 and ISO 14044). Compared with conventional secondary treatment processes, implementing high-level technologies to meet the strict standards could reduce an average of 59% of the eutrophication potential while increasing other environmental impacts resulting from both direct and indirect emissions by an average of 146%. We propose advanced technologies that integrate both midpoint and endpoint LCA results to meet stringent standards in areas sensitive to eutrophication.

Coupling electro-dewatering and low-temperature air-drying for efficient dewatering of sludge

This study investigated the effects of electro-dewatering on subsequent low-temperature drying at various potentials and the characteristics of low-temperature air-drying sludge were explored through experiments and multi-physical modeling. Experimental results showed that the extracellular polymeric substance (EPS) content in the sludge was reduced during electro-dewatering process, even the species of organic matter was changed, as well as the dewatered cake tend to form many seepage channels, crack and a certain number of holes. These changes in the properties and structure were conducive to the subsequent low-temperature drying process. For air-drying process, the mass of the sludge cake variation was simulated and results were consistent with the experimental phenomenon. Firstly, the weight of the sludge cake was decreased approximately linearly with time, then tended to stable and reached the dewatering limitation finally. The applied higher electric field intensity (25 V cm⁻¹) in the front-end electro-dewatering were conducive to promote water vapor diffusion activity in air-drying stage. Energy consumption and yield analysis results indicated that the combined technology has lower energy consumption and higher yield than that of directly low-temperature drying.

Life cycle assessment of sewage sludge treatment and disposal based on nutrient and energy recovery: A review

With the acceleration of urbanization, the production of urban sludge is increasing rapidly. To minimize resource input and waste output, it is crucial to execute analyses of environmental impact and assessments of sustainability on different technical strategies involving sludge disposal based on Life Cycle Assessment (LCA), which is a great potential mean of environmental management adopted internationally in the 21st century. This review aims to compare the environmental sustainability of existing sludge management schemes with a purpose of nutrient recovery and energy saving, respectively, and also to include the substitution benefits of alternative sludge products. Simultaneously, LCA research regarding the emerging sludge management technologies and sludge recycling (cement, adsorbent, bricks) is analyzed. Additionally, the key aspects of the LCA process are worth noting in the context of the current limitations reviewed here. It is worth emphasizing that no technical remediation method can reduce all environmental damage simultaneously, and these schemes are typically more applicable to the assumed local conditions. Future LCA research should pay more attention to the toxic effects of different sludge treatment methods, evaluate the technical ways of adding pretreatment technology to the 'front end' of the sludge treatment process, and further explore how to markedly reduce environmental damage in order to maximize energy and nutrient recovery from the LCA perspective.

Toxic metals in soil due to the land application of sewage sludge in China: Spatiotemporal variations and influencing factors

Land application has become a promising method for recycling energy and resources from sewage sludge; however, the changes that occur to the toxic metal concentrations in soil following the application of sewage sludge have been poorly investigated in China. The present study attempted to investigate the spatiotemporal variations of toxic metal concentrations in soil due to the land application of sewage sludge and the critical influencing factors. Overall, the results indicated that an increasing ratio of sewage sludge for land application, the concentrated disposal measures, and a shallower soil may lead to elevated toxic metal concentrations in soil. The worst scenario simulation showed that the cumulative discharge of toxic metals through sludge disposal were ranked as: Zn > Cu > Cr > Pb > Ni > As > Cd > Hg. After sewage sludge was applied to previously unaffected soil, i.e., background soil, the toxic metal concentrations in the soil increased annually over the period from 2006 to 2017. However, with respect to the affected soil, the concentrations of Zn and Cu increased, whereas the concentrations of As, Cd, Cr, and Pb decreased annually over the period from 2006 to 2017. The results indicate that, in practice, the selection of soil for sewage sludge disposal depends on the background and actual concentrations of toxic metals in a soil as well as the stress caused by the amount of sewage sludge application to cultivated land. We propose to use sewage sludge containing relatively lower concentrations of metals than the disposal soil for land application. Furthermore, land application of sewage sludge should be suited to local conditions in the future sewage sludge management.

Development of a novel phosphorus recovery system using incinerated sewage sludge ash (ISSA) and phosphorus-selective adsorbent

Phosphorus is an essential nutrient but faces foreseeable resource depletion. The incinerated sewage sludge ash (ISSA) is a promising source for recovering phosphorus. In this study, we proposed a new system for recovering phosphorus from ISSA. This innovative system uses phosphorus-selective adsorbent to purify phosphorus from the ISSA acid leachate. Laboratory scale batch and column tests were performed to demonstrate the feasibility of the system. Note that >70% of phosphorus in ISSA can be recovered as a high-purity recovery product. The product showed a structure similar to hydroxyapatite (Ca₅(PO₄)₃OH). The total amount of Ca, P, and O in the product was above 90 wt%. The content of trace elements (As, Cd, Cr, and Pb) in the product was below the fertilizer limits, suggesting that the health and environmental risks of using fertilizer in agriculture are negligible. The expected costs of the system were estimated. The reusability of the adsorbent can reduce the operational costs to a satisfactory level. This study provides a practical alternative for recovering phosphorus from ISSA.

Sustainability prioritization of sewage sludge to energy scenarios with hybrid-data consideration: a fuzzy decision-making framework based on full consistency method and fusion ranking model

This work proposed a novel mathematical framework for the sustainability assessment of sewage sludge to energy (SStE) scenarios, by resorting to fuzzy multi-criteria decision-making (MCMD) methods. In which, an evaluation system including twelve criteria from four dimensions was introduced, while the fuzzy triangular number (TFN) was used to address the hybrid-data issue in the decision-making. More importantly, four fuzzy MCDM methods were used to make the following methodological contributions: (1) the fuzzy full consistency method (FUCOM) was extended into uncertain conditions to determine the weights easily and reliably, which preserves the consistency in ambiguous, subjective judgments; (2) a novel TFN-based fusion ranking model was developed by aggregating three fuzzy MCDM approaches, which not only takes the hybrid data as input information for decision-making (by combining the TFN) but also promotes the confidence in final prioritization (by reconciling different sequences). Four illustrative SStE scenarios were studied to test the feasibility of the model. Besides, the effectiveness and advantages of the model were verified by results comparison and discussion.

Life Cycle Assessment of Municipal Wastewater Treatment Processes Regarding Energy Production from the Sludge Line

The efficient and timely removal of organic matter and nutrients from water used in normal municipal functions is considered to be the main task of wastewater treatment plants (WWTPs). Therefore, these facilities are considered to be essential units that are required to avoid pollution of the water environment and decrease the possibility of triggering eutrophication. Even though these benefits are undeniable, they remain at odds with the high energy demand of wastewater treatment and sludge processes. As a consequence, WWTPs have various environmental impacts, which can be estimated and categorized using Life Cycle Assessment (LCA) analysis. In this study, a municipal WWTP based in Poznań, Poland, was examined using the method defined in ISO 14040. ReCiPe Endpoint and Midpoint (v1.11), in a hierarchical approach, were used to evaluate the environmental impacts regarding 18 different categories. All calculations were conducted using a detailed database from 2019, which describes each chosen facility. It was found that the energy component, related to the wastewater treatment process demand and electricity production, is the main determinant of the sum of the environmental impact indicators in light of the modelled energy mix. Therefore, it determines the entire process as an environmentally friendly activity.

Life-Cycle Assessment of the Wastewater Treatment Technologies in Indonesia’s Fish-Processing Industry

In this paper, a comprehensive life-cycle assessment (LCA) is carried out in order to evaluate the multiple environmental-health impacts of the biological wastewater treatment of the fish-processing industry throughout its life cycle. To this aim, the life-cycle impact assessment method based on endpoint modeling (LIME) was considered as the main LCA model. The proposed methodology is based on an endpoint modeling framework that uses the conjoint analysis to calculate damage factors for human health, social assets, biodiversity, and primary production, based on Indonesia’s local data inventory. A quantitative microbial risk assessment (QMRA) is integrated with the LIME modeling framework to evaluate the damage on human health caused by five major biological treatment technologies, including chemical-enhanced primary clarification (CEPC), aerobic-activated sludge (AS), up-flow anaerobic sludge blanket (UASB), ultrafiltration (UF) and reverse osmosis (RO) in this industry. Finally, a life-cycle costing (LCC) is carried out, considering all the costs incurred during the lifetime. The LCA results revealed that air pollution and gaseous emissions from electricity consumption have the most significant environmental impacts in all scenarios and all categories. The combined utilization of the UF and RO technologies in the secondary and tertiary treatment processes reduces the health damage caused by microbial diseases, which contributes significantly to reducing overall environmental damage.

Life cycle assessment of nutrient recycling from wastewater: A critical review

Recovering resources from wastewater systems is increasingly being emphasised. Many technologies exist or are under development for recycling nutrients such as nitrogen and phosphorus from wastewater to agriculture. Planning and design methodologies are needed to identify and deploy the most sustainable solutions in given contexts. For the environmental sustainability dimension, life cycle assessment (LCA) can be used to assess environmental impact potentials of wastewater-based nutrient recycling alternatives, especially nitrogen and phosphorus recycling. This review aims to evaluate how well the LCA methodology has been adapted and applied for assessing opportunities of wastewater-based nutrient recycling in the form of monomineral, multimineral, nutrient solution and organic solid. We reviewed 65 LCA studies that considered nutrient recycling from wastewater for agricultural land application. We synthesised some of their insights and methodological practices, and discussed the future outlook of using LCA for wastewater-based nutrient recycling. In general, more studies suggested positive environmental outcomes from wastewater-based nutrient recycling, especially when chemical inputs are minimised, and source separation of human excreta is achieved. The review shows the need to improve methodological consistency (e.g., multifunctionality, fertiliser offset accounting, contaminant accounting), ensure transparency of inventory and methods, consider uncertainty in comparative LCA context, integrate up-to-date cross-disciplinary knowledge (e.g., agriculture science, soil science) into LCA models, and consider the localised impacts of recycled nutrient products. Many opportunities exist for applying LCA at various scales to support decisions on wastewater-based nutrient recycling - for instance, performing "product perspective" LCA on recycled nutrient products, integrating "process perspective" LCA with other systems approaches for selecting and optimising individual recovery processes, assessing emerging nutrient recovery technologies and integrated resource recovery systems, and conducting systems analysis at city, national and global level.

Life cycle environmental impacts of sewage sludge treatment methods for resource recovery considering ecotoxicity of heavy metals and pharmaceutical and personal care products

Sewage sludge handling is becoming a concern in Europe due to its increasing amount and the presence of contaminants, such as heavy metals and pharmaceutical and personal care products (PPCPs). Currently, over 70% of sludge in Europe is treated thermally by incineration or used as fertilizer in agriculture. New thermochemical methods are under development and are expected to be implemented in the near future. This paper considers the life cycle environmental impacts of the following five alternatives for sludge handling, taking into account the presence of heavy metals and PPCPs: i) agricultural application of anaerobically digested sludge; ii) agricultural application of composted sludge; iii) incineration; iv) pyrolysis; and v) wet air oxidation. The results suggest that anaerobic digestion with recovery of nutrients and electricity has the lowest environmental impacts in 11 out of 18 categories considered. For the mean to maximum resource recovery, composting is the worst alternative, followed by pyrolysis with lower recovery rates. Agricultural application of anaerobically digested sludge has the highest freshwater ecotoxicity due to heavy metals, unless their concentration is in the lowest range, as found in some European sewage sludge applied on land. Therefore, stricter control of heavy metals in the sludge is needed for this option to limit freshwater ecotoxicity to the levels comparable with the thermal processes. The results also indicate that PPCPs have a negligible contribution to freshwater ecotoxicity when compared to heavy metals in the anaerobically digested sludge. Since thermal processes are currently drawing attention due to their potential benefits, the findings of this work suggest that their adoption is environmentally beneficial only if high resource recovery rates can be achieved.

Sustainable disposal of excess sludge: Incineration without anaerobic digestion

Handling excess sludge produced by wastewater treatment is a common problem worldwide. Due to limited space available in landfills, as well as difficulties involved in using excess sludge in agriculture, there is a need for alternative disposal methods. Although anaerobic digestion (AD) is widely used in processing sludge, only partial energy recovery from methane and sludge volume reduction can be achieved, resulting in a substantial amount of sludge remaining, which needs to be disposed of. Direct incineration after sludge drying is one possible option, a practice that is already in place in some cities in China. A comparison between direct incineration and conventional AD (with or without pretreatment by thermal hydrolysis) has to be made with respect to the energy balance and investment & operational (I & O) costs. This comparison reveals direct incineration to have the lowest energy deficit and I & O costs. Therefore, it is expected that direct incineration without AD will become the preferred sustainable approach to handling sludge.

Occurrence and leaching of silver in municipal sewage sludge in China

Sewage treatment plants effectively remove silver (Ag) from sewage. Sewage sludge can therefore be important Ag sinks, polluting the environment with this element. In this work, we report a nation-wide survey on the Ag content of sewage sludge in China (0.23-19.02 mg kg^-1, average 2.72 mg kg^-1). Furthermore, we identify that sludge disposal represents an important Ag pollution source (84.48 tons in 2016) for the environment by estimating the national and provincial inventories of sludge-borne Ag in China. Also the positive correlations between the per capita gross domestic product (GDP)/provincial GDP and the content/mass loadings of Ag highlighted the impact of human activities on Ag pollution. In different samples, strong complexation of thiosulfate contributed to the highest leaching concentration (95.00-438.15 μg kg^-1) and ratio (1.9-8.8%) of Ag, emphasizing the necessity of a long-term risk assessment for landfill and land application of sludge.

Comparative assessment of sewage sludge disposal alternatives in Mashhad: a life cycle perspective

Municipal wastewater treatment facilities produce a lot of sludge which is concentrated with different pollutants. The sustainable design of the sludge disposal alternatives is of crucial importance for touristic cities like Mashhad in Iran. Increasing sludge generation and its accumulation in the city and more stringent legislations highlight the challenge of sludge disposal, recently. This study compares different alternatives to reach maximum possible environmental benefits as well as the most cost-effective technologies. In this study, life cycle analysis (LCA) assesses different scenarios for disposal of sewage sludge which is aerobically treated and dewatered for two real case studies. Alteymore and KhinArab are wastewater treatment units in the city. The scenarios include incineration, composting, and landfilling alternatives. The incineration and landfill scenarios are the least interesting solutions according to different life cycle impact categories. The heavy metals' emission to the soil worsens their impacts. Also, lifecycle cost analysis reveals that composting scenario is more cost-saving than others. However, main disadvantage of the composting scenario is its contribution in freshwater eutrophication. To move towards sustainability, the composting scenario is here determined as the best scenario for sludge disposal in Mashhad.

Handling uncertainties inherited in life cycle inventory and life cycle impact assessment method for improved life cycle assessment of wastewater sludge treatment

Life cycle assessment (LCA) has been used to evaluate environmental impacts of products or processes including wastewater treatment. Uncertainty has not received adequate attention in LCA studies. Uncertainty inherited in LCA steps such as the life cycle inventory (LCI) or the life cycle impact assessment (LCIA) method use is unavoidable, but it affects LCA outcomes and associated decision-making. The objective of this paper was to show the impact of uncertainty from LCI and LCIA method on LCA outcomes by using a case study base approach on wastewater sludge treatment processes. A qualitative analysis included setting criteria about what data to be included in LCI, characterization of data, differentiating between major and minor contributors in LCI modeling, evaluation of data quality indicators, setting achievable alternative scenarios, and selecting proper LCIA method were used, in addition to quantitative analysis included assigning most appropriate values for data gaps and proper distribution, and conducting probabilistic analysis to evaluate overall uncertainty. This research used a full-scale wastewater treatment plant in Missouri, USA for case study in which multiple hearth incineration (MHI) is the existing process, while fluid bed incineration (FBI) and anaerobic digestion (AD) were proposed as the alternatives. Using ReCipe method, the study revealed that variation in LCA results of MHI is 63.4% for a single end-point score of 57.9 mPt. On the two alternative processes, it is 54.6% probable that FBI would have more environmental impact than AD. The case study showed that the proposed steps were able to address issues of data uncertainty. Due to differences in characterization, normalization, and weighting factors, different LCIA methods may point out different conclusions and need to be addressed in evaluation.

Greenhouse gas emission from small clinics solid waste management scenarios in an urban area of an underdeveloping country: A life cycle perspective

This study aimed to investigate the effects on the environment of small clinics solid waste management by applying a life cycle analysis approach. Samples were collected from 371 private clinics situated in densely populated areas of Hyderabad, Pakistan. The solid waste from surveyed clinics was categorically quantified on daily basis for 30 consecutive days. The functional unit for waste was defined as 1 tonne. System limitations were defined as landfilling, incineration, composting, material recovery, and transportation of solid waste. The treatment and disposal methods were assessed according to their greenhouse gas emission rate. For the evaluation, three different scenarios were designed. The second scenario resulted in the highest emission value of 1491.78 kg CO₂ eq/tonne of solid waste due to mixed waste incineration, whereas the first scenario could not offer any saving because of uncovered landfilling and 67.5% higher transport fuel consumption than the proposed network. The proposed third scenario was found to be a better solution for urban clinics solid waste management, as it resulted in savings of 951.38 kg CO₂ eq/tonne of solid waste. This integrated design is practicable by resource-constrained economy. This system consists of composting, material recovery, and incineration of hazardous waste. The proposed system also includes a feasible transportation method for urban area collection networks. The findings of the present study can play a vital role in documenting evidence and for policymakers to plan the solid waste management of clinics, as previously no studies have been conducted on this particular case. Implications: This study aims to highlight the impact of small clinics solid waste management scenarios on the environment in a developing country's urban area. Life cycle analysis is used for comparison of greenhouse gase emission from different scenarios, including the purposed integrated method. Small clinics play a very important role in health care, and their waste management is a very serious issue; however, there are no previous studies on this particular case to the best knowledge of the authors. This study can be considered as forerunner effort to quantify the environmental footprint of small clinics solid waste in urban areas of a developing country.

LCA of Hospital Solid Waste Treatment Alternatives in a Developing Country: The Case of District Swat, Pakistan

Improper management of hospital waste leads to serious health and environmental issues, particularly in the case of developing countries, where, often, applied technologies are obsolete and there is a lack of compliance with respect to international best practices. The present study is designed to assess the environmental impacts of hospital waste management practices in Swath District, Pakistan. For this purpose, a life-cycle assessment (LCA) is applied for the estimation of different impacts of current and alternative hospital solid waste (HSW) treatment practices. Two scenarios are used to describe the current alternative practices (Scenario A and Scenario B), referring either to incineration or to direct landfilling of HSW without any sorting of collected materials. Conversely, Scenario C, which includes the use of pyrolysis and chemical disinfection, are considered as an up-to-date alternative, based on current international recommendations in this field. Prior to the analysis of impacts, due to the lack of available information, data were directly collected from both government and private hospitals in District Swat, involving measurements and a characterization of collected waste. In parallel, interviews were conducted, involving the hospitals’ personnel. With respect to waste generation, government hospitals produce a larger amount of waste (74%) compared to private hospitals (24%). Poor regulatory indications and the absence of clear obligations for collection, disposal and management still represent a first obstacle to implement good practices. After defining the boundary of the system and the functional unit, according to standardized LCA practices, a life--cycle impact assessment (LCIA) was conducted, considering eight impact categories: human toxicity, freshwater eco-toxicity, marine aquatic eco-toxicity, terrestrial eco-toxicity, acidification potential, climate change, eutrophication and photochemical oxidation. The current practices (Scenario A and Scenario B) turned out to be the worst for all categories. In particular, the largest impact of all is recorded for human toxicity generated by incineration. In parallel, it must be considered that, currently, no recycling or reusing practices are implemented. Conversely, Scenario C (alternative up-to-date practices) would generate lower impacts. In detail, the highest value was recorded for marine aquatic ecotoxicity in relation to pyrolysis. Applying Scenario C, it would be possible to recover some materials, such as plastics, paper and sharps. In detail, considering the observed compositional characteristics, it would be possible to recover up to 78% of sharps and recycle 41% of plastic and paper from the general waste stream. Moreover, energy could be recovered from the pyrolysis process, generating a further benefit for the surrounding area. A lack of awareness, knowledge and infrastructures prevents the application of correct management practices, further degrading life and environmental conditions of this remote region of Pakistan. The huge difference in impacts between current practices and alternatives is demonstrated, showing a clear alternative for future management plans in this remote region and supporting future actions for local policymakers and hospital managers.

Methane emissions from anaerobic sludge digesters in Mexico: On-site determination vs. IPCC Tier 1 method

Wastewater treatment is an important source of methane (CH₄) emissions. In most large-size aerobic treatment plants, the excess sludge is digested in anaerobic reactors (AD), with the concomitant CH₄ emissions. The guidelines of the Intergovernmental Panel on Climate Change (IPCC) have been adopted worldwide for quantifying the national emission inventories, which include wastewater treatment plants (WWTP) as a key category. The IPCC recommends using default emission factors (Tier 1) for countries with limited available data (such as Mexico and most developing countries). However, these estimates have a high degree of uncertainty, owing to the lack of reliable information about the operation process and local environmental conditions. In order to reduce uncertainty in the estimation of CH₄ emission from WWTP in Mexico, a country-specific emission factor was determined for AD associated with activated sludge process. This was accomplished with on-site data obtained from the AD of six activated sludge WWTP. In addition, the measured CH₄ emissions were compared to those resulting from the application of the IPCC Tier 1 method, using the recommended default methane correction factor (MCF: 0.8) as well as alternate values (0.32 and 0.26) recently proposed by the authors. Results show that the IPCC Tier 1 method, using the recommended MCF, highly overestimate CH₄ emissions compared with the values obtained on-site. In contrast, the alternate MCF achieved better estimations than the IPCC-recommended MCF, much closer to the observed emission values. The CH₄ emission factor proposed as country (Mexico) specific value is 0.49 kg CH₄/kg BOD_rem, which would allow the application of IPCC Tier 2 method. By doing so, the uncertainty associated with CH₄ emission from aerobic treatment plants with AD would be reduced. This, in turn, would provide important information for implementing appropriate CH₄ mitigation strategies for the water sector.

Applying rhamnolipid to enhance hydrolysis and acidogenesis of waste activated sludge: retarded methanogenic community evolution and methane production

Recently, bio-surfactants, like rhamnolipid (RL), have been used as efficient pre-treatments to enhance the accumulation of short-chain fatty acids (SCFAs) from waste activated sludge (WAS). The current study found that SCFA accumulation occurred with evolutional variation in methanogen with RL (0.04 g RL g-1 TSS), resulting in a retarded methane production over a period of 20 days. However, a slow methane production was only detected before the 18th day, while the concentration of acetic acid (HAc) accumulated to a peak at 2616.94 ± 310.77 mg L-1 in the presence of RL, which was 2.58-fold higher than the control assay. During the retarded methane production, the concentration of dissolved hydrogen also increased to 49.27 ± 6.02 μmol L-1, in comparison with 22.45 μmol L-1 of control WAS without RL. According to the analysis of archaea communities induced by RL, hydrogenotrophic methanogens, like Methanobrevibacter, had been substantially promoted at the beginning of quick SCFA and hydrogen production, but their percentage decreased from 70% to 35% with time. Intrinsically, the growth of acetotrophic methanogens were postponed but they contributed most to the methane production in this research according to the correlation analysis.

Processing Technology Selection for Municipal Sewage Treatment Based on a Multi-Objective Decision Model under Uncertainty

This study considers the two factors of environmental protection and economic benefits to address municipal sewage treatment. Based on considerations regarding the sewage treatment plant construction site, processing technology, capital investment, operation costs, water pollutant emissions, water quality and other indicators, we establish a general multi-objective decision model for optimizing municipal sewage treatment plant construction. Using the construction of a sewage treatment plant in a suburb of Chengdu as an example, this paper tests the general model of multi-objective decision-making for the sewage treatment plant construction by implementing a genetic algorithm. The results show the applicability and effectiveness of the multi-objective decision model for the sewage treatment plant. This paper provides decision and technical support for the optimization of municipal sewage treatment.

Technical, hygiene, economic, and life cycle assessment of full-scale moving bed biofilm reactors for wastewater treatment in India

Moving bed biofilm reactor (MBBR) is a highly effective biological treatment process applied to treat both urban and industrial wastewaters in developing countries. The present study investigated the technical performance of ten full-scale MBBR systems located across India. The biochemical oxygen demand, chemical oxygen demand, total suspended solid, pathogens, and nutrient removal efficiencies were low as compared to the values claimed in literature. Plant 1 was considered for evaluation of environmental impacts using life cycle assessment approach. CML 2 baseline 2000 methodology was adopted, in which 11 impact categories were considered. The life cycle impact assessment results revealed that the main environmental hot spot of this system was energy consumption. Additionally, two scenarios were compared: scenario 1 (direct discharge of treated effluent, i.e., no reuse) and scenario 2 (effluent reuse and tap water replacement). The results showed that scenario 2 significantly reduce the environmental impact in all the categories ultimately decreasing the environmental burden. Moreover, significant economic and environmental benefits can be obtained in scenario 2 by replacing the freshwater demand for non-potable uses. To enhance the performance of wastewater treatment plant (WWTP), there is a need to optimize energy consumption and increase wastewater collection efficiency to maximize the operating capacity of plant and minimize overall environmental footprint. It was concluded that MBBR can be a good alternative for upgrading and optimizing existing municipal wastewater treatment plants with appropriate tertiary treatment. Graphical abstract ᅟ.

Environmental comparison of alternative treatments for sewage sludge: An Italian case study

A Life Cycle Assessment (LCA) was applied to compare different alternatives for sewage sludge treatment: such as land spreading, composting, incineration, landfill and wet oxidation. The LCA system boundaries include mechanical dewatering, the alternative treatment, transport, and final disposal/recovery of residues. Cases of recovered materials produced as outputs from the systems, were resolved by expanding the system boundaries to include avoided primary productions. The impact assessment was calculated using the CML-IA baseline method. Results showed that the incineration of sewage sludge with electricity production and solid residues recovery collects the lowest impact indicator values in the categories human toxicity, fresh water aquatic ecotoxicity, acidification and eutrophication, while it has the highest values for the categories global warming and ozone layer depletion. Land spreading has the lowest values for the categories abiotic depletion, fossil fuel depletion, global warming, ozone layer depletion and photochemical oxidation, while it collects the highest values for terrestrial ecotoxicity and eutrophication. Wet oxidation has just one of the best indicators (terrestrial ecotoxicity) and three of the worst ones (abiotic depletion, human toxicity and fresh water aquatic ecotoxicity). Composting process shows intermediate results. Landfill has the worst performances in global warming, photochemical oxidation and acidification. Results indicate that if the aim is to reduce the effect of the common practice of sludge land spreading on human and ecosystem toxicity, on acidification and on eutrophication, incineration with energy recovery would clearly improve the environmental performance of those indicators, but an increase in resource depletion and global warming is unavoidable. However, these conclusions are strictly linked to the effective recovery of solid residues from incineration, as the results are shown to be very sensitive with respect to this assumption. Similarly, the quality of the wet oxidation process residues plays an important role in defining the impact of this treatment.

Removal of Phenolic Compounds from Water Using Sewage Sludge-Based Activated Carbon Adsorption: A Review

Due to their industrial relevance, phenolic compounds (PC) are amongst the most common organic pollutants found in many industrial wastewater effluents. The potential detrimental health and environmental impacts of PC necessitate their removal from wastewater to meet regulatory discharge standards to ensure meeting sustainable development goals. In recent decades, one of the promising, cost-effective and environmentally benign techniques for removal of PC from water streams has been adsorption onto sewage sludge (SS)-based activated carbon (SBAC). This is attributed to the excellent adsorptive characteristics of SBAC and also because the approach serves as a strategy for sustainable management of huge quantities of different types of SS that are in continual production globally. This paper reviews conversion of SS into activated carbons and their utilization for the removal of PC from water streams. Wide ranges of topics which include SBAC production processes, physicochemical characteristics of SBAC, factors affecting PC adsorption onto SBAC and their uptake mechanisms as well as the regeneration potential of spent SBAC are covered. Although chemical activation techniques produce better SBAC, yet more research work is needed to harness advances in material science to improve the functional groups and textural properties of SBAC as well as the low performance of physical activation methods. Studies focusing on PC adsorptive performance on SBAC using continuous mode (that are more relevant for industrial applications) in both single and multi-pollutant aqueous systems to cover wide range of PC are needed. Also, the potentials of different techniques for regeneration of spent SBAC used for adsorption of PC need to be assessed in relation to overall economic evaluation within realm of environmental sustainability using life cycle assessment.

Support Phosphorus Recycling Policy with Social Life Cycle Assessment: A Case of Japan

Producing phosphorus (P) fertilizers with recycled P is desirable for efficient use of P resource. However, the current cost of P recycling facilities in Japan strongly discourages the government from adopting this practice. To expand consideration for a P recycling policy, the concept of social externality was introduced. Social issues, such as the violation of human rights in P mining in the Western Sahara, have been identified in recent studies; nevertheless, a systematic approach towards accountability was lacking. Therefore, the purpose of this study was to support a P recycling policy with a social life cycle assessment (SLCA) by contrasting the social impacts associated with mineral and recycled P fertilizers using the case study of Japan. We developed a framework based on the UNEP-SETAC SLCA Guidelines with a supplementary set of P-specific social indicators. The results showed that the marginal social impact associated with recycled P was much less relative to mineral P; however, even if we factored in the maximum recycling capacity, a mandate of P recycling policy in Japan would not mitigate the impacts significantly relative to the current situation because only 15% of P rocks could be substituted. In short, we showed that a semi-quantitative SLCA framework would be useful to communicate the wide spectrum of social impacts to policymakers.

Preliminary investigation of the microwave pyrolysis mechanism of sludge based on high frequency structure simulator simulation of the electromagnetic field distribution

Under microwave irradiation, raw sludge was pyrolyzed mainly by evaporation of water, with a weight loss ratio of 84.8% and a maximum temperature not exceeding 200°C. High-temperature pyrolysis of SiC sludge could be realized, with a weight loss ratio of 93.4% and a final pyrolysis temperature of 1131.7°C. Variations between the electric field intensity distribution are the main reason for the differences of pyrolysis efficiencies. HFSS simulation showed that the electric field intensity of the raw sludge gradually decreased from 2.94×10⁴V/m to 0.88×10⁴V/m when pyrolysis ends, while that of SiC sludge decreased from 3.73×10⁴V/m at the beginning to 1.28×10⁴V/m, then increased to 4.03×10⁴V/m. The electromagnetic effect is the main factor (r≥0.91) influencing the temperature increase and weight loss of raw sludge. Both the electromagnetic effect and heat conduction effect influenced temperature rise and weight loss of SiC sludge, but the former's influence was comparatively larger.

The response of soil microbial diversity and abundance to long-term application of biosolids

The disposal of biosolids poses a major environmental and economic problem. Agricultural use is generally regarded as the best means of disposal. However, its impact on soil ecosystems remains uncertain. Biosolids can improve soil properties by supplying nutrients and increasing organic matter content but there is also a potentially detrimental effect arising from the introduction of heavy metals into soils. To assess the balance between these competing effects on soil health, we investigated soil bacterial and fungal diversity and community structure at a site that has been dedicated to the disposal of sewage sludge for over 100 years. Terminal restriction fragment length polymorphism (T-RFLP) was used to characterize the soil microbial communities. The most important contaminants at the site were Ni, Cu, Zn, Cd, and Pb. Concentrations were highly correlated and Zn concentration was adopted as a good indicator of the overall (historical) biosolids loading. A biosolids loading, equivalent to 700-1000 mg kg^-1 Zn appeared to be optimal for maximum bacterial and fungal diversity. This markedly exceeds the maximum soil Zn concentration of 300 mg kg^-1permitted under the current UK Sludge (use in agriculture) Regulations. Redundancy analysis (RDA) suggested that the soil microbial communities had been altered in response to the accumulation of trace metals, especially Zn, Cd, and Cu. We believe this is the first time the trade-off between positive and negative effects of long term (>100 years) biosolids disposal on soil microorganisms have been observed in the field situation.