1
|
Srivastava A, Sharma A, Jena MK, Vuppaladadiyam AK, Reguyal F, Joshi J, Sharma A, Shah K, Gupta A, Chin BLF, Saptoro A, Sarmah AK. Can pyrolysis handle biomedical wastes?: Assessing the potential of various biomedical waste treatment technologies in tackling pandemics. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 946:174167. [PMID: 38917898 DOI: 10.1016/j.scitotenv.2024.174167] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/08/2024] [Revised: 06/05/2024] [Accepted: 06/19/2024] [Indexed: 06/27/2024]
Abstract
Globally, COVID-19 has not only caused tremendous negative health, social and economic impacts, but it has also led to environmental issues such as a massive increase in biomedical waste. The biomedical waste (BMW) was generated from centralized (hospitals, clinics, and research facilities) and extended (quarantine camps, COVID-19 test camps, and quarantined homes) healthcare facilities. Many effects, such as the possibility of infection spread, unlawful dumping/disposal, and an increase in toxic emissions by common BMW treatment facilities, are conjectured because of the rise in waste generation. However, it is also an opportunity to critically analyze the current BMW treatment scenario and implement changes to make the system more economical and environmentally sustainable. In this review, the waste disposal guidelines of the BMW management infrastructure are critically analyzed for many functional parameters to bring out possible applications and limitations of individual interventions. In addition, an investigation was made to select appropriate technology based on the environmental setting.
Collapse
Affiliation(s)
- Akshay Srivastava
- Waste to Resources Laboratory, Department of Biotechnology & Chemical Engineering, Manipal University Jaipur, Jaipur 303007, India
| | - Anita Sharma
- Waste to Resources Laboratory, Department of Biotechnology & Chemical Engineering, Manipal University Jaipur, Jaipur 303007, India
| | - Manoj Kumar Jena
- School of Engineering, RMIT University, Melbourne, VIC 3000, Australia
| | | | - Febelyn Reguyal
- Department of Civil & Environmental Engineering, Faculty of Engineering, The University of Auckland, Private Bag 92019, Auckland 1142, New Zealand
| | - Jyeshtharaj Joshi
- Homi Bhabha National Institute, Training School Complex, Anushaktinagar, Mumbai- 400094, India; Department of Chemical Engineering, Institute of Chemical Technology, Nathalal Parekh Marg, Matunga, Mumbai-19, India
| | - Abhishek Sharma
- Waste to Resources Laboratory, Department of Biotechnology & Chemical Engineering, Manipal University Jaipur, Jaipur 303007, India; School of Engineering, RMIT University, Melbourne, VIC 3000, Australia.
| | - Kalpit Shah
- School of Engineering, RMIT University, Melbourne, VIC 3000, Australia
| | - Akhilendra Gupta
- Malaviya National Institute of Technology, Malviya Nagar, Jaipur, Rajasthan 302017, India
| | - Bridgid Lai Fui Chin
- Department of Chemical and Energy Engineering, Curtin University Malaysia, 250 CDT, 98009 Miri, Sarawak, Malaysia
| | - Agus Saptoro
- Energy and Environment Research Cluster, Faculty of Engineering and Science, Curtin University Malaysia, 250 CDT, 98009 Miri, Sarawak, Malaysia
| | - Ajit K Sarmah
- Department of Civil & Environmental Engineering, Faculty of Engineering, The University of Auckland, Private Bag 92019, Auckland 1142, New Zealand.
| |
Collapse
|
2
|
Yang W, Gupta R, Song Z, Wang B, Sun L. Mechanism of soot and particulate matter formation during high temperature pyrolysis and gasification of waste derived from MSW. WASTE MANAGEMENT (NEW YORK, N.Y.) 2024; 182:21-31. [PMID: 38631177 DOI: 10.1016/j.wasman.2024.04.025] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/29/2023] [Revised: 04/07/2024] [Accepted: 04/12/2024] [Indexed: 04/19/2024]
Abstract
This research investigates the formation mechanism of soot and particulate matter during the pyrolysis and gasification of waste derived from Municipal Solid Waste (MSW) in a laboratory scale drop tube furnace. Compared with CO2 gasification atmosphere, more ultrafine particles (PM0.2, aerodynamic diameter less than 0.2 μm) were generated in N2 atmosphere at 1200℃, which were mainly composed of polycyclic aromatic hydrocarbons (PAHs), graphitic carbonaceous soot and volatile alkali salts. High reaction temperatures promote the formation of hydrocarbon gaseous products and their conversion to PAHs, which ultimately leads to the formation of soot particles. The soot particles generated by waste derived from MSW pyrolysis and gasification both have high specific surface area and well-developed pore structure. Compared with pyrolysis, the soot generated by gasification of waste derived from MSW had smaller size and higher proportion of inorganic components. The higher pyrolysis temperature led to the collapse of the mesoporous structure of submicron particles, resulting in a decrease in total pore volume and an increase in specific surface area. Innovatively, this research provides an explanation for the effect of reaction temperature/ CO2 on the formation pathways and physicochemical properties of soot and fine particulate matter.
Collapse
Affiliation(s)
- Wu Yang
- State Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan 430074, China
| | - Rajender Gupta
- Department of Chemical and Material Engineering, University of Alberta, Edmonton, AB T6G 1H9, Canada
| | - Zijian Song
- Resource and Environmental Branch, China National Institute of Standardization, Beijing 100191, China
| | - Ben Wang
- State Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan 430074, China
| | - Lushi Sun
- State Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan 430074, China.
| |
Collapse
|
3
|
Patel S, Das P, Priyadarshi M, Babbar M, Hussain A, Bharat TV. Anaerobic digestion of herbal waste: a waste to energy option. ENVIRONMENTAL MONITORING AND ASSESSMENT 2024; 196:600. [PMID: 38849696 DOI: 10.1007/s10661-024-12769-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/16/2023] [Accepted: 05/25/2024] [Indexed: 06/09/2024]
Abstract
Herbal waste produced during the manufacturing of herbal products is a potential feedstock for anaerobic digestion due to high amount of organic matter that can be transformed into biogas as an energy resource. Therefore, the present study was undertaken to convert herbal waste produced during the manufacturing of common of Ayurveda products into biogas through anaerobic digestion process using batch test study under controlled mesophilic temperature conditions of 35 °C with food to inoculum ratio of 0.75. The maximum biomethane potential (BMP) of 0.90 (gCH4COD/g CODfed) and sludge activity of 0.70 (gCH4-CD/gVSS) was exhibited by WS herbal waste owing to its high chemical oxygen demand (COD) of 4 g/g and better solubilization potential of the organic matter showing change in volatile suspended solids (ΔVSS) of 79%. On the other hand, the waste derived from the TA herb, exhibited the least biogas yield of 0.55 (gCH4COD/g CODfed) and sludge activity of 0.40 (gCH4-CD/gVSS), albeit with higher organic matter present. This was due to the possible hindrance of waste solubilization by the presence of lignin. The waste derived from VVL and PE showed intermediate BMP and sludge activity. The methane generation rate constant (k), a key indicator of the biodegradation potential, was also evaluated. The k values showed similar trend as of BMP values ranging from 0.081 to 0.15 d-1 thus indicating the influence of presence of lignin and the change in ΔVSS. The present study proves anaerobic digestion to be an alternative treatment method to be a milestone for management of herbal wastes and can be successfully implemented on real-scale systems.
Collapse
Affiliation(s)
- Shivani Patel
- Civil Engineering Department, Netaji Subhas University of Technology, West Campus, Jaffarpur, New, Delhi-110073, India
| | - Partha Das
- Civil Engineering Department, Netaji Subhas University of Technology, West Campus, Jaffarpur, New, Delhi-110073, India
| | - Manjeeta Priyadarshi
- Civil Engineering Department, Netaji Subhas University of Technology, West Campus, Jaffarpur, New, Delhi-110073, India
| | - Mimansa Babbar
- Civil Engineering Department, Netaji Subhas University of Technology, West Campus, Jaffarpur, New, Delhi-110073, India
| | - Athar Hussain
- Civil Engineering Department, Netaji Subhas University of Technology, West Campus, Jaffarpur, New, Delhi-110073, India.
| | - T V Bharat
- Civil Engineering Department, IIT Guwahati, Assam, 781039, India
| |
Collapse
|
4
|
Shi D, Liu J, Tong H, Fu K, Salam M, Huang J, Xu S, Wen X, Xie H, Wang P, Cai H, Luo D. Enhancement of catalytic detoxification of polycyclic aromatic hydrocarbons in fly ash from municipal solid waste incineration via magnetic hydroxyapatite-assisted hydrothermal treatment. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 918:170467. [PMID: 38290685 DOI: 10.1016/j.scitotenv.2024.170467] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/16/2023] [Revised: 01/23/2024] [Accepted: 01/24/2024] [Indexed: 02/01/2024]
Abstract
The emission of carcinogenic, teratogenic, and mutagenic polycyclic aromatic hydrocarbons (PAHs) during municipal solid waste incineration (MSWI) of fly ash (FA) has attracted significant attention. Hydrothermal treatment (HT) has emerged as a practical approach for degrading PAHs during MSWI of FA by utilizing magnetite (Fe3O4) as a catalyst and hydrogen peroxide (H2O2) as an oxidizing agent. In this study, as an alternative to traditional hydroxyapatite (HAP), eggshell-derived magnetic hydroxyapatite (MHAP) was synthesized and applied in the hydrothermal catalytic degradation of PAHs in MSWI FA in an H2O2 system for the first time. The degradation efficiency of the PAHs is influenced not only by H2O2 but also by the choice of hydroxyapatite. Adding HAP or MHAP during hydrothermal treatment with H2O2 substantially reduced the overall PAH concentration and toxicity equivalent quantity (TEQ), superior to that without H2O2. MHAP demonstrated superior catalytic activity compared to HAP in the presence of H2O2 in the hydrothermal system. The hydrothermal detoxification of the PAHs increased with increasing MHAP dosage. By employing 0.5 mol/L H2O2 as the oxidant and 15 wt% MHAP as the catalyst, a total PAH degradation rate of 88.9 % was achieved, with a remarkable TEQ degradation rate of 98.3 %. Notably, the level of 4-6-ring PAHs, particularly benzo(a) pyrene (BaP) and dibenz(a,h)anthracene (DahA), with a TEQ of 1.0, was significantly reduced (by 69.4 % and 46.0 %, respectively). MHAP remained stable during the hydrothermal catalytic process, whereas H2O2 was effectively activated by MHAP and decomposed to produce strongly oxidizing hydroxyl (•OH) under hydrothermal conditions. •OH produced from the decomposition of H2O2 and metals on the surface of MHAP act as catalytically active centers, efficiently converting high-ring PAHs to low-ring PAHs. These findings provide valuable insights and a technological foundation for PAH detoxification in MSWI FA via hydrothermal catalytic oxidation.
Collapse
Affiliation(s)
- Dezhi Shi
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing 400044, PR China.
| | - Jiayu Liu
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing 400044, PR China
| | - Haihang Tong
- School of Energy and Environment, City University of Hong Kong, Kowloon Tong, 999077, Hong Kong
| | - Kun Fu
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing 400044, PR China
| | - Muhammad Salam
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing 400044, PR China
| | - Jie Huang
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing 400044, PR China
| | - Shuo Xu
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing 400044, PR China
| | - Xianyi Wen
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing 400044, PR China
| | - Hui Xie
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing 400044, PR China
| | - Pan Wang
- Chongqing Water Resources and Electric Engineering College, Chongqing 402160, PR China.
| | - Huayi Cai
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing 400044, PR China
| | - Dan Luo
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing 400044, PR China
| |
Collapse
|
5
|
Oden CP, Werth CJ, Kienzle BA, Katz LE. Impact of organic matter on transformation during thermal remediation of pyrene-contaminated substrates. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 906:167569. [PMID: 37793444 DOI: 10.1016/j.scitotenv.2023.167569] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/30/2023] [Revised: 09/29/2023] [Accepted: 10/01/2023] [Indexed: 10/06/2023]
Abstract
Thermal remediation (TR) is a broadly applicable technology that is effective at removing volatile and semi-volatile contaminants from soil. However, TR can be costly and inefficient in practice, with underlying removal and transformation mechanisms poorly understood. To better understand the role organic matter plays in removal, a series of experiments was performed with a humic substance, humic modified silica, and a natural soil in the presence of pyrene from 100 to 500 °C and compared to prior experiments using pure minerals. Detection of by-products confirmed that pyrene was removed by transformation in addition to volatilization. Oxidation via hydroxyl radical formation and reductive hydrogenation were both indicated as possible reaction mechanisms promoted by organic matter. Because the presence of bulk water did not impact the extent of pyrene degradation or transformation, it is hypothesized that hydroxyl radicals were produced from soil organic matter functional groups, such as carboxyl and phenol groups, and possibly bound water at elevated temperatures in dry experiments. Additionally, the average oxidation state of carbon in detected by-products increased with temperature in experiments with humic modified silica and soil but not humic substance alone, though the extent of degradation did not significantly change. This shift in oxidation state may indicate that attachment of organic matter to another surface may increase interaction between reactive species. The results of this study show that contaminant transformation in soils during TR significantly contributes to removal, even at temperatures lower than those used in traditional treatment. This information will help to guide the design and operation of TR systems, potentially reducing energy requirements and highlighting the necessity of testing for transformation by-products.
Collapse
Affiliation(s)
- Cameron P Oden
- Department of Civil, Architectural, and Environmental Engineering, University of Texas at Austin, 301 E Dean Keeton St, Austin, TX, USA.
| | - Charles J Werth
- Department of Civil, Architectural, and Environmental Engineering, University of Texas at Austin, 301 E Dean Keeton St, Austin, TX, USA.
| | - Benjamin A Kienzle
- Department of Civil, Architectural, and Environmental Engineering, University of Texas at Austin, 301 E Dean Keeton St, Austin, TX, USA.
| | - Lynn E Katz
- Department of Civil, Architectural, and Environmental Engineering, University of Texas at Austin, 301 E Dean Keeton St, Austin, TX, USA.
| |
Collapse
|
6
|
Dung NT, Toan VD, Mai NT, Ha NNM, Huong NTL. Polycyclic Aromatic Hydrocarbons from Domestic Solid Waste Incinerators in Nam Dinh Province, Northern Area of Vietnam: A Comprehensive Assessment of Emission, Source Markers and Human Health Risk. BULLETIN OF ENVIRONMENTAL CONTAMINATION AND TOXICOLOGY 2023; 111:18. [PMID: 37466742 DOI: 10.1007/s00128-023-03774-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/06/2023] [Accepted: 07/08/2023] [Indexed: 07/20/2023]
Abstract
A comprehensive research of the polycyclic aromatic hydrocarbons (PAHs) emission from domestic waste incinerators in northern areas of Vietnam, were investigated. Sixty-four samples from two domestic waste incinerators were collected and analyzed for PAHs. The PAHs concentrations in the samples were determined using gas chromatography coupled with mass spectrometry. In April, June, September, and November 2021, Σ16PAHs mean concentrations in chimney air samples were 970.9 ± 57.4, 1061.9 ± 49.8, 1070.7 ± 41.3 and 1136.1 ± 136.5 µg m-3, respectively. The mean emission factors of Σ16PAHs were 7.5 mg/kg. The mean percentages of low molecular weight PAHs were predominant in the analyzed air samples. The toxic equivalent quotient of samples ranged from 30.7 to 41.7 mg/kg, whereas the incremental lifetime cancer risk exceeded 10- 3. This results implied a high level of concern with potentially negative health consequences. The four diagnostic ratios of PAHs were found and can be used for identification of sources markers from domestic waste incinerators.
Collapse
Affiliation(s)
- Nguyen Tien Dung
- Center of Science Technology and Environment, Vietnam Cooperative Alliances, Hanoi, Vietnam
| | - Vu Duc Toan
- Research of Organic Matter Group (ROOM), Environmental and Life Science Research Laboratory, Thuyloi University, Hanoi, Vietnam.
| | - Ngo Tra Mai
- Institute of Physics, Viet Nam Academy of Science and Technology, Hanoi, Vietnam.
| | - Nguyen Nu My Ha
- Ha Tinh University, Cam Vinh Commune, Cam Xuyen District, Ha Tinh, Vietnam
| | - Nguyen Thi Lan Huong
- Research of Organic Matter Group (ROOM), Environmental and Life Science Research Laboratory, Thuyloi University, Hanoi, Vietnam
| |
Collapse
|
7
|
Yao Z, He X, Yin M, Han H, Zhang Q. Mechanochemical remediation of fluoranthene contaminated soil and biotoxicity evaluation. ENVIRONMENTAL TECHNOLOGY 2023; 44:2104-2112. [PMID: 34962220 DOI: 10.1080/09593330.2021.2024271] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/24/2021] [Accepted: 12/11/2021] [Indexed: 05/30/2023]
Abstract
A mechanochemical (MC) method was employed for the remediation of soil contaminated with fluoranthene (C16H10, FL) a four-ringed polycyclic aromatic hydrocarbon (PAH) containing three benzene rings and a central five-membered heterocyclic ring, with the effects of soil inorganic components, milling conditions, and the degradation mechanism investigated. Results showed that the addition of SiO2 and kaolin to soil resulted in a greater increase in the effectiveness of FL removal than other inorganic additives. After 3 hours of milling at 500 rpm, the FL removal rate from SiO2 containing soil, reached 99.26%, with the removal efficiency increasing in accordance with an increase in milling duration and speed. The milled samples were characterized by FT-IR, Raman spectroscopy, and GC-MS analysis, revealing the mechanism of FL degradation, including destruction of the aromatic skeleton structure and the formation of amorphous carbon and graphite. The MC remediation method was applied to FL contaminated soil, showing that FL was efficiently degraded in soil without any soil additives, resulting in a significant reduction in the biotoxicity of the remediated soil. The organic matter, moisture content and pH of the actual soil changed slightly after mechanical ball milling. Thus, the MC method has high potential in the remediation of PAH-contaminated soils.HIGHLIGHTSA mechanochemical (MC) method for the degradation of fluoranthene was assessed.The use of silica and kaolin as soil additives enhances fluoranthene remediation.Fluoranthene can be efficiently removed from contaminated soil by milling alone.The degradation mechanism was skeleton structure destruction and carbonization.The biotoxicity of soil was significantly reduced by milling.
Collapse
Affiliation(s)
- Zhenzhen Yao
- School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Xiaoman He
- School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Mengqiuzi Yin
- School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Han Han
- School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Qiwu Zhang
- School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, People's Republic of China
| |
Collapse
|
8
|
Zhao S, Zhang J. Microplastics in soils during the COVID-19 pandemic: Sources, migration and transformations, and remediation technologies. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 883:163700. [PMID: 37105487 PMCID: PMC10125914 DOI: 10.1016/j.scitotenv.2023.163700] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/26/2023] [Revised: 03/26/2023] [Accepted: 04/19/2023] [Indexed: 05/03/2023]
Abstract
The COVID-19 pandemic has led to a notable upsurge of 5-10 % in global plastic production, which could have potential implications on the soil quality through increased microplastics (MPs) content. The elevated levels of MPs in the soil poses a significant threat to both the environment and human health, hence necessitating the remediation of MPs in the environment. Despite the significant attention given to MPs remediation in aqueous environments, less consideration has been given to MPs remediation in the soil. Consequently, this review highlights the major sources of MPs in the soil, their migration and transformation behaviors during the COVID-19 pandemic, and emphasizes the importance of utilizing remediation technologies such as phytoremediation, thermal treatment, microbial degradation, and photodegradation for MPs in the soil. Furthermore, this review provides a prospective outlook on potential future remediation methods for MPs in the soil. Although the COVID-19 pandemic is nearing its end, the long-term impact of MPs on the soil remains, making this review a valuable reference for the remediation of MPs in the post-pandemic soil.
Collapse
Affiliation(s)
- Shan Zhao
- College of Ocean Science and Engineering, Shanghai Maritime University, Shanghai 201306, China; College of Civil Engineering, Tongji University, Shanghai 200092, China.
| | - Jian Zhang
- College of Ocean Science and Engineering, Shanghai Maritime University, Shanghai 201306, China
| |
Collapse
|
9
|
Bolan S, Padhye LP, Kumar M, Antoniadis V, Sridharan S, Tang Y, Singh N, Hewawasam C, Vithanage M, Singh L, Rinklebe J, Song H, Siddique KHM, Kirkham MB, Wang H, Bolan N. Review on distribution, fate, and management of potentially toxic elements in incinerated medical wastes. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 321:121080. [PMID: 36702428 DOI: 10.1016/j.envpol.2023.121080] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/17/2022] [Revised: 01/07/2023] [Accepted: 01/11/2023] [Indexed: 06/18/2023]
Abstract
Medical wastes include all solid and liquid wastes that are produced during the treatment, diagnosis, and immunisation of animals and humans. A significant proportion of medical waste is infectious, hazardous, radioactive, and contains potentially toxic elements (PTEs) (i.e., heavy metal (loids)). PTEs, including arsenic (As), cadmium (Cd), lead (Pb) and mercury (Hg), are mostly present in plastic, syringes, rubber, adhesive plaster, battery wastes of medical facilities in elemental form, as well as oxides, chlorides, and sulfates. Incineration and sterilisation are the most common technologies adopted for the safe management and disposal of medical wastes, which are primarily aimed at eliminating deadly pathogens. The ash materials derived from the incineration of hazardous medical wastes are generally disposed of in landfills after the solidification/stabilisation (S/S) process. In contrast, the ash materials derived from nonhazardous wastes are applied to the soil as a source of nutrients and soil amendment. The release of PTEs from medical waste ash material from landfill sites and soil application can result in ecotoxicity. The present study is a review paper that aims to critically review the dynamisms of PTEs in various environmental media after medical waste disposal, the environmental and health implications of their poor management, and the common misconceptions regarding medical waste.
Collapse
Affiliation(s)
- Shiv Bolan
- UWA School of Agriculture and Environment, The University of Western Australia, Perth, WA, 6009, Australia; The UWA Institute of Agriculture, The University of Western Australia, Perth, WA, 6009, Australia; Healthy Environments and Lives (HEAL) National Research Network, Australia
| | - Lokesh P Padhye
- Department of Civil and Environmental Engineering, Faculty of Engineering, The University of Auckland, Auckland, 1010, New Zealand
| | - Manish Kumar
- CSIR-National Environmental Engineering Research Institute (CSIR-NEERI), Nehru Marg, Nagpur, 440020, Maharashtra, India
| | - Vasileios Antoniadis
- University of Thessaly, Department of Agriculture Crop Production and Rural Environment, Fytokou Street, 384 46, Volos, Greece
| | - Srinidhi Sridharan
- CSIR-National Environmental Engineering Research Institute (CSIR-NEERI), Nehru Marg, Nagpur, 440020, Maharashtra, India
| | - Yuanyuan Tang
- School of Environmental Science and Engineering, Southern University of Science and Technology, Shenzhen, 518055, China
| | - Narendra Singh
- Environmental Science Center, Decarbonisation and Resource Managemental, British Geological Survey, Nottinghamshire, NG12 5GG, Keyworth, UK
| | - Choolaka Hewawasam
- Department of Civil and Environmental Technology, Faculty of Technology, University of Sri Jayewardenepura, Pitipana, Homagama, Sri Lanka
| | - Meththika Vithanage
- Ecosphere Resilience Research Center, Faculty of Applied Sciences, University of Sri Jayewardenepura, Nugegoda, 10250, Sri Lanka
| | - Lal Singh
- CSIR-National Environmental Engineering Research Institute (CSIR-NEERI), Nehru Marg, Nagpur, 440020, Maharashtra, India
| | - Jörg Rinklebe
- University of Wuppertal, School of Architecture and Civil Engineering, Institute of Foundation Engineering, Water- and Waste-Management, Laboratory of Soil- and Groundwater-Management, Pauluskirchstraße 7, 42285, Wuppertal, Germany; Department of Environment, Energy and Geoinformatics, Sejong University, Seoul, 05006, Republic of Korea
| | - Hocheol Song
- Department of Environment, Energy and Geoinformatics, Sejong University, Seoul, 05006, Republic of Korea; Department of Earth Resources and Environmental Engineering, Hanyang University, Seoul, 04763, Korea
| | - Kadambot H M Siddique
- UWA School of Agriculture and Environment, The University of Western Australia, Perth, WA, 6009, Australia; The UWA Institute of Agriculture, The University of Western Australia, Perth, WA, 6009, Australia
| | - M B Kirkham
- Department of Agronomy, Kansas State University, Manhattan, KS, 66506, United States
| | - Hailong Wang
- Biochar Engineering Technology Research Center of Guangdong Province, School of Environmental and Chemical Engineering, Foshan University, Foshan, Guangdong, 528000, China; Key Laboratory of Soil Contamination Bioremediation of Zhejiang Province, Zhejiang A&F University, Hangzhou, 311300, China
| | - Nanthi Bolan
- UWA School of Agriculture and Environment, The University of Western Australia, Perth, WA, 6009, Australia; The UWA Institute of Agriculture, The University of Western Australia, Perth, WA, 6009, Australia; Healthy Environments and Lives (HEAL) National Research Network, Australia.
| |
Collapse
|
10
|
Nguyen HT, Pham VQ, Nguyen TPM, Nguyen TTT, Tu BM, Le PT. Emission and distribution profiles of polycyclic aromatic hydrocarbons in solid residues of municipal and industrial waste incinerators, Northern Vietnam. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:38255-38268. [PMID: 36580247 DOI: 10.1007/s11356-022-24680-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/21/2022] [Accepted: 12/05/2022] [Indexed: 06/17/2023]
Abstract
The concentrations and profiles of 18 polycyclic aromatic hydrocarbons (PAHs) in particulate matter (PM10), fly ash (FA), and bottom ash (BA) were examined in three incineration residues. Samples were collected from different municipal and industrial solid waste incinerators in Northern Vietnam. The average concentrations of total PAHs in PM10, fly ash, and bottom ash were 9.55 × 103 ng/Nm3, 215 × 103 ng/g, and 2.38 ng/g, respectively. Low-molecular-weight PAHs (2 to 3 rings) were predominant in most samples. The emission factor of total PAHs decreased in the order of FA > BA > PM10. A higher concentration of total PAHs was found in industrial facilities than that in municipal ones. The high carcinogenic proportion of PAHs together with significantly high annual emissions reflect the high pollution risk to the ecosystem by PAHs in the case of reuse of incineration ashes (e.g., brick production). Regarding the carcinogenic risk of PAH-bounded ashes or particles, calculations from this study imply the significant threat for workers who have been manipulated in the incineration facilities, directly exposed to fly and bottom ashes. Meanwhile, the risk from PAH-bound particulate was not considered a significant threat for both normal adults and children. Further study on PAHs contained in incinerator waste dumps should be conducted in Vietnam to assess the potential contamination risk of these incineration by-products.
Collapse
Affiliation(s)
- Hue Thi Nguyen
- Institute of Environmental Technology, Vietnam Academy of Science and Technology, 18 Hoang Quoc Viet Street, Cau Giay, Hanoi, Vietnam.
- Graduate University of Science and Technology, Vietnam Academy of Science and Technology, 18 Hoang Quoc Viet Street, Cau Giay, Hanoi, Vietnam.
| | - Viet Quoc Pham
- Institute of Environmental Technology, Vietnam Academy of Science and Technology, 18 Hoang Quoc Viet Street, Cau Giay, Hanoi, Vietnam
| | - Thi Phuong Mai Nguyen
- Faculty of Environmental Sciences, University of Science, Vietnam National University, Hanoi, Thanh Xuan, 334 Nguyen Trai, Hanoi, Vietnam
| | - Thuy Thi Thu Nguyen
- Faculty of Chemistry, University of Science, Thai Nguyen University, Tan Thinh Ward, Thai Nguyen City, 24000, Vietnam
| | - Binh Minh Tu
- Faculty of Chemistry, University of Science, Vietnam National University, Hanoi, 19 Le Thanh Tong street, Hoan Kiem, Hanoi, Vietnam
| | - Phuong Thu Le
- University of Science and Technology of Hanoi, 18 Hoang Quoc Viet Street, Cau Giay, Hanoi, Vietnam
| |
Collapse
|
11
|
Chaturvedi K, Singhwane A, Dhangar M, Mili M, Gorhae N, Naik A, Prashant N, Srivastava AK, Verma S. Bamboo for producing charcoal and biochar for versatile applications. BIOMASS CONVERSION AND BIOREFINERY 2023; 14:1-27. [PMID: 36817514 PMCID: PMC9924895 DOI: 10.1007/s13399-022-03715-3] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/24/2022] [Revised: 12/16/2022] [Accepted: 12/25/2022] [Indexed: 05/29/2023]
Abstract
Bamboo, the fastest-growing plant, has several unique characteristics that make it appropriate for diverse applications. It is low-cost, high-tensile, lightweight, flexible, durable, and capable of proliferating even in ineffectual areas (e.g., incline). This review discusses the unique properties of bamboo for making charcoal and biochar for diverse applications. To produce bamboo charcoal and biochar, this study reports on the pyrolysis process for the thermal degradation of organic materials in an oxygen-depleted atmosphere under a specific temperature. This is an alternative method for turning waste biomass into products with additional value, such as biochar. Due to various advantages, bamboo charcoal is preferred over regular charcoal as it has four times the absorption rate and ten times more surface area reported. According to the reports, the charcoal yield ranges from 24.60 to 74.27%. Bamboo chopsticks were the most useful source for producing charcoal, with a high yield of 74.27% at 300 °C in nitrogen, but the thorny bamboo species have a tremendous amount of minimal charcoal, i.e., 24.60%. The reported biochar from bamboo yield ranges from 32 to 80%. The most extensive biochar production is produced by the bamboo D. giganteus, which yields 80% biochar at 300 °C. Dry bamboo stalks at 400 °C produced 32% biochar. One of the sections highlights biochar as a sustainable solution for plastic trash management produced during the COVID-19 pandemic. Another section is dedicated to the knowledge enhancement about the broad application spectrum of the charcoal and biochar. The last section highlights the conclusions, future perspectives, and recommendations on the charcoal and biochar derived from bamboo. Graphical Abstract
Collapse
Affiliation(s)
- Kamna Chaturvedi
- Council of Scientific and Industrial Research – Advanced Materials and Processes Research Institute (AMPRI), Bhopal, MP 462026 India
- Academy of Scientific and Innovative Research - Advanced Materials and Processes Research Institute (AMPRI), Hoshangabad Road, Bhopal, MP 462026 India
| | - Anju Singhwane
- Council of Scientific and Industrial Research – Advanced Materials and Processes Research Institute (AMPRI), Bhopal, MP 462026 India
| | - Manish Dhangar
- Council of Scientific and Industrial Research – Advanced Materials and Processes Research Institute (AMPRI), Bhopal, MP 462026 India
| | - Medha Mili
- Council of Scientific and Industrial Research – Advanced Materials and Processes Research Institute (AMPRI), Bhopal, MP 462026 India
- Academy of Scientific and Innovative Research - Advanced Materials and Processes Research Institute (AMPRI), Hoshangabad Road, Bhopal, MP 462026 India
| | - Nikhil Gorhae
- Council of Scientific and Industrial Research – Advanced Materials and Processes Research Institute (AMPRI), Bhopal, MP 462026 India
- Academy of Scientific and Innovative Research - Advanced Materials and Processes Research Institute (AMPRI), Hoshangabad Road, Bhopal, MP 462026 India
| | - Ajay Naik
- Council of Scientific and Industrial Research – Advanced Materials and Processes Research Institute (AMPRI), Bhopal, MP 462026 India
- Academy of Scientific and Innovative Research - Advanced Materials and Processes Research Institute (AMPRI), Hoshangabad Road, Bhopal, MP 462026 India
| | - N. Prashant
- Council of Scientific and Industrial Research – Advanced Materials and Processes Research Institute (AMPRI), Bhopal, MP 462026 India
| | - A. K. Srivastava
- Council of Scientific and Industrial Research – Advanced Materials and Processes Research Institute (AMPRI), Bhopal, MP 462026 India
- Academy of Scientific and Innovative Research - Advanced Materials and Processes Research Institute (AMPRI), Hoshangabad Road, Bhopal, MP 462026 India
| | - Sarika Verma
- Council of Scientific and Industrial Research – Advanced Materials and Processes Research Institute (AMPRI), Bhopal, MP 462026 India
- Academy of Scientific and Innovative Research - Advanced Materials and Processes Research Institute (AMPRI), Hoshangabad Road, Bhopal, MP 462026 India
| |
Collapse
|
12
|
Igalavithana AD, Yuan X, Attanayake CP, Wang S, You S, Tsang DCW, Nzihou A, Ok YS. Sustainable management of plastic wastes in COVID-19 pandemic: The biochar solution. ENVIRONMENTAL RESEARCH 2022; 212:113495. [PMID: 35660402 PMCID: PMC9155208 DOI: 10.1016/j.envres.2022.113495] [Citation(s) in RCA: 22] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/17/2021] [Revised: 03/08/2022] [Accepted: 05/14/2022] [Indexed: 05/21/2023]
Abstract
To prevent the COVID-19 transmission, personal protective equipment (PPE) and packaging materials have been extensively used but often managed inappropriately, generating huge amount of plastic waste. In this review, we comprehensively discussed the plastic products utilized and the types and amounts of plastic waste generated since the outbreak of COVID-19, and reviewed the potential treatments for these plastic wastes. Upcycling of plastic waste into biochar was addressed from the perspectives of both environmental protection and practical applications, which can be verified as promising materials for environmental protections and energy storages. Moreover, novel upcycling of plastic waste into biochar is beneficial to mitigate the ubiquitous plastic pollution, avoiding harmful impacts on human and ecosystem through direct and indirect micro-/nano-plastic transmission routes, and achieving the sustainable plastic waste management for value-added products, simultaneously. This suggests that the plastic waste could be treated as a valuable resource in an advanced and green manner.
Collapse
Affiliation(s)
- Avanthi D Igalavithana
- Department of Soil Science, Faculty of Agriculture, University of Peradeniya, 20400, Sri Lanka; Korea Biochar Research Centre, APRU Sustainable Waste Management & Division of Environmental Science and Ecological Engineering, Korea University, Seoul, 02841, South Korea
| | - Xiangzhou Yuan
- Korea Biochar Research Centre, APRU Sustainable Waste Management & Division of Environmental Science and Ecological Engineering, Korea University, Seoul, 02841, South Korea; R&D Centre, Sun Brand Industrial Inc., Jeollanam-do, 57248, South Korea
| | - Chammi P Attanayake
- Department of Soil Science, Faculty of Agriculture, University of Peradeniya, 20400, Sri Lanka
| | - Shujun Wang
- Korea Biochar Research Centre, APRU Sustainable Waste Management & Division of Environmental Science and Ecological Engineering, Korea University, Seoul, 02841, South Korea; College of Water Conservancy, Shenyang Agricultural University, Shenyang, China
| | - Siming You
- Division of Systems, Power and Energy, James Watt School of Engineering, University of Glasgow, Glasgow, G12 8QQ, UK
| | - Daniel C W Tsang
- Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
| | - Ange Nzihou
- Université de Toulouse, Mines Albi, UMR CNRS 5302, Centre RAPSODEE, Campus Jarlard, F-81013, Albi Cedex 09, France; Princeton University, School of Engineering and Applied Science, Princeton, NJ 08544, USA; Princeton University, Andlinger Center for Energy and the Environment, Princeton, NJ 08544, USA
| | - Yong Sik Ok
- Korea Biochar Research Centre, APRU Sustainable Waste Management & Division of Environmental Science and Ecological Engineering, Korea University, Seoul, 02841, South Korea.
| |
Collapse
|
13
|
Oden CP, Werth CJ, Notini L, Katz LE. Fate of pyrene on mineral surfaces during thermal remediation as a function of temperature. ENVIRONMENTAL SCIENCE. PROCESSES & IMPACTS 2022; 24:1181-1194. [PMID: 35766907 DOI: 10.1039/d2em00027j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
There is evidence that contaminants can transform at the elevated temperatures of thermal remediation; however, the contribution of redox active minerals to transformation has not been investigated. Three redox active minerals (i.e., birnessite (MnO2), magnetite (Fe3O4), and hematite (Fe2O3)) and one redox inactive mineral (Ottawa sand (SiO2)) were spiked with pyrene and thermally treated. Under dry, anoxic conditions, 100%, 75% ± 3%, 70% ± 15%, and 14% ± 28% of the initial pyrene mass was removed with birnessite, magnetite, hematite, and Ottawa sand, respectively, after treatment at 250 °C for 30 min. Under wet, oxic conditions, 92% ± 8%, 86% ± 12%, 79% ± 4%, and 42% ± 7% was removed for the same minerals, respectively, after treatment at only 150 °C for 30 min. Baseline studies with Ottawa sand resulted in volatilization alone of pyrene with no transformation observed. Increased pyrene loading was used to evaluate potential transformation pathways based on identified by-products, demonstrating that both oxidative and reductive pathways were operative depending on the conditions. Reaction products in the presence of redox active minerals indicate transformation was dominated by reduction via hydrogenation in dry experiments, and by oxidation via hydroxyl radicals in wet experiments. The latter was unexpected, because only low hydroxyl radical concentrations have been detected in mineral-water systems at ambient temperature. These results indicate that understanding dominant reaction pathways and products is advantageous for the design of efficient and safe thermally enhanced treatment systems.
Collapse
Affiliation(s)
- Cameron P Oden
- University of Texas at Austin, USA
- University of Colorado Boulder, USA.
| | | | - Luiza Notini
- University of Texas at Austin, USA
- ETH Zurich, Switzerland
| | | |
Collapse
|
14
|
Adesina O, Ojesola F, Olowolafe O, Igbafe A. Assessment of Polycyclic Aromatic Hydrocarbons in Indoor Air of Local Public Eatery in Ado-Ekiti, Western Nigeria. SCIENTIFIC AFRICAN 2022. [DOI: 10.1016/j.sciaf.2022.e01191] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022] Open
|
15
|
Dai C, Han Y, Duan Y, Lai X, Fu R, Liu S, Leong KH, Tu Y, Zhou L. Review on the contamination and remediation of polycyclic aromatic hydrocarbons (PAHs) in coastal soil and sediments. ENVIRONMENTAL RESEARCH 2022; 205:112423. [PMID: 34838568 DOI: 10.1016/j.envres.2021.112423] [Citation(s) in RCA: 58] [Impact Index Per Article: 29.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/30/2021] [Revised: 11/16/2021] [Accepted: 11/18/2021] [Indexed: 06/13/2023]
Abstract
The rapid economic and population growth in coastal areas is causing increasingly serious polycyclic aromatic hydrocarbons (PAHs) pollution in these regions. This review compared the PAHs pollution characteristics of different coastal areas, including industrial zones, commercial ports, touristic cities, aquacultural & agricultural areas, oil & gas exploitation areas and megacities. Currently there are various treatment methods to remediate soils and sediments contaminated with PAHs. However, it is necessary to provide a comprehensive overview of all the available remediation technologies up to date, so appropriate technologies can be selected to remediate PAHs pollution. In view of that, we analyzed the characteristics of the remediation mechanism, summarized the remediation methods for soil or sediments in coastal areas, which were physical repair, chemical oxidation, bioremediation and integrated approaches. Besides, this review also reported the development of new multi-functional green and sustainable systems, namely, micro-nano bubble (MNB), biochar, reversible surfactants and peracetic acid. While physical repair, expensive but efficient, was regarded as a suitable method for the PAHs remediation in coastal areas because of land shortage, integrated approaches would produce better results. The ultimate aim of the review was to ensure the successful restructuring of PAHs contaminated soil and sediments in coastal areas. Due to the environment heterogeneity, PAHs pollution in coastal areas remains as a daunting challenge. Therefore, new and suitable technologies are still needed to address the environmental issue.
Collapse
Affiliation(s)
- Chaomeng Dai
- College of Civil Engineering, Tongji University, 1239 Siping Road, Shanghai, 200092, PR China
| | - Yueming Han
- College of Civil Engineering, Tongji University, 1239 Siping Road, Shanghai, 200092, PR China
| | - Yanping Duan
- Institute of Urban Studies, School of Environmental and Geographical Sciences, Shanghai Normal University, 100 Guilin Rd., Shanghai, 200234, PR China; Yangtze River Delta Urban Wetland Ecosystem National Field Observation and Research Station, Shanghai, 200234, China.
| | - Xiaoying Lai
- College of Management and Economics, Tianjin University, Tianjin, 300072, PR China
| | - Rongbing Fu
- State Key Laboratory of Pollution Control and Resource Reuse, Tongji University, 1239 Siping Road, Shanghai, 200092, PR China
| | - Shuguang Liu
- College of Civil Engineering, Tongji University, 1239 Siping Road, Shanghai, 200092, PR China
| | - Kah Hon Leong
- Department of Environmental Engineering, Faculty of Engineering and Green Technology, Universiti Tunku Abdul Rahman, Jalan Universiti, Bandar Barat, Kampar, 31900, Perak, Malaysia
| | - Yaojen Tu
- Institute of Urban Studies, School of Environmental and Geographical Sciences, Shanghai Normal University, 100 Guilin Rd., Shanghai, 200234, PR China; Yangtze River Delta Urban Wetland Ecosystem National Field Observation and Research Station, Shanghai, 200234, China
| | - Lang Zhou
- Department of Civil, Architectural, and Environmental Engineering, The University of Texas at Austin, 301 E. Dean Keeton St., Stop C1786, Austin, TX, 78712, USA
| |
Collapse
|
16
|
Shi D, Lv M, Tong H, Liu J, Cai H, Luo D, Ma C, Xu X, Wang B. Effect of magnetite on the catalytic oxidation of polycyclic aromatic hydrocarbons in fly ash from MSW incineration: A comparative study of one-step and two-step hydrothermal processes. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2022; 303:114238. [PMID: 34891010 DOI: 10.1016/j.jenvman.2021.114238] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/11/2021] [Revised: 11/15/2021] [Accepted: 12/02/2021] [Indexed: 06/13/2023]
Abstract
Polycyclic aromatic hydrocarbons (PAHs), many of which are carcinogenic, teratogenic, and mutagenic, exist in fly ash (FA) produced from municipal solid waste incineration (MSWI). Hydrothermal treatment (HT) is an efficient approach to remove PAHs from MSWI FA. Here, magnetite (Fe3O4) was used as the catalyst and hydrogen peroxide (H2O2) as the oxidant for one-step and two-step catalytic hydrothermal methods. When the magnetite dosage increased to 15 wt%, the maximum degradation rates of PAHs were 84.36% and 92.51%, respectively; however, the toxicity equivalent quantity (TEQ) degradation rates of the PAHs both increased upon increasing the magnetite dose. At 20 wt% Fe3O4, the maximum TEQ degradation rates of the PAHs were 93.29% and 97.76%, respectively. The reaction between OH and PAHs is non-selective, which means that LMW, MMW, and HMW PAHs were all degraded. The decrease in TEQ was mainly due to the degradation of HMW PAHs, i.e., those with five rings. Under the same Fe3O4 dose, oxidant dose, and reaction time, the detoxification of PAHs by the two-step method was significantly better than that of the one-step method, possibly because the two-step method more effectively produced OH. The first step degraded more than 90% of PAHs, and the residual PAHs in the HT products of the first step limited the utilization of the oxidant during the second step. The minerals in the HT products implied that the two-step hydrothermal method not only produced more OH, which reacted with PAHs, but also generated metal-magnetite substitution, which affected its surface reactivity during heavy metal adsorption and catalysis. These results revealed that both magnetite and the two-step hydrothermal treatment degraded PAHs. 20 wt% magnetite was the optimal amount during the two-step hydrothermal catalytic oxidation of MSWI FA.
Collapse
Affiliation(s)
- Dezhi Shi
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing, 400044, PR China.
| | - Mengying Lv
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing, 400044, PR China
| | - Haihang Tong
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing, 400044, PR China
| | - Jiayu Liu
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing, 400044, PR China
| | - Huayi Cai
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing, 400044, PR China
| | - Dan Luo
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing, 400044, PR China
| | - Cailing Ma
- Key Laboratory of Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, College of Environment and Ecology, Chongqing University, Chongqing, 400044, PR China
| | - Xiaoyi Xu
- School of Environmental Science and Engineering, Suzhou University of Science and Technology, Suzhou, 215001, PR China.
| | - Bin Wang
- College of Civil Engineering, Guizhou University, Guiyang, 550025, PR China
| |
Collapse
|
17
|
Dehal A, Vaidya AN, Kumar AR. Biomedical waste generation and management during COVID-19 pandemic in India: challenges and possible management strategies. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2022; 29:14830-14845. [PMID: 34622401 PMCID: PMC8496889 DOI: 10.1007/s11356-021-16736-8] [Citation(s) in RCA: 15] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/16/2021] [Accepted: 09/22/2021] [Indexed: 04/12/2023]
Abstract
The COVID-19 pandemic has resulted in the massive generation of biomedical waste (BMW) and plastic waste (PW). This sudden spike in BMW and PW has created challenges to the existing waste management infrastructure, especially in developing countries. Safe disposal of PW and BMW is essential; otherwise, this virus will lead to a waste pandemic. This paper reviews the generation of BMW and PW before and during the COVID-19 pandemic, the regulatory framework for BMW management, policy interventions for COVID-19-based BMW (C-BMW), the capacity of BMW treatment and disposal facilities to cope with the challenges, possible management strategies, and perspectives in the Indian context. This study indicated that policy intervention helped minimize the general waste treated as C-BMW, especially during the second pandemic. Inadequacy of common BMW treatment facilities' (CBMWTFs) capacity to cope with the BMW daily generation was observed in some states resulting in compromised treatment conditions. Suggestions for better management of BMW and PW include decontamination of used personal protective equipment (PPEs) and recycling, alternate materials for PPEs, segregation strategies, and use of BMW for co-processing in cement kilns. All upcoming CBMWTFs should be equipped with higher capacity and efficient incinerators for the sound management of BMW. Post-pandemic monitoring of environmental compartments is imperative to assess the possible impacts of pandemic waste.
Collapse
Affiliation(s)
- Ashish Dehal
- Chemical and Hazardous Waste Management Division, CSIR-National Environmental Engineering Research Institute, Nagpur, 440020, India
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, 201002, India
| | - Atul Narayan Vaidya
- Chemical and Hazardous Waste Management Division, CSIR-National Environmental Engineering Research Institute, Nagpur, 440020, India
| | - Asirvatham Ramesh Kumar
- Chemical and Hazardous Waste Management Division, CSIR-National Environmental Engineering Research Institute, Nagpur, 440020, India.
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, 201002, India.
| |
Collapse
|
18
|
Kumar M, Bolan NS, Hoang SA, Sawarkar AD, Jasemizad T, Gao B, Keerthanan S, Padhye LP, Singh L, Kumar S, Vithanage M, Li Y, Zhang M, Kirkham MB, Vinu A, Rinklebe J. Remediation of soils and sediments polluted with polycyclic aromatic hydrocarbons: To immobilize, mobilize, or degrade? JOURNAL OF HAZARDOUS MATERIALS 2021; 420:126534. [PMID: 34280720 DOI: 10.1016/j.jhazmat.2021.126534] [Citation(s) in RCA: 107] [Impact Index Per Article: 35.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/10/2021] [Revised: 06/09/2021] [Accepted: 06/26/2021] [Indexed: 05/22/2023]
Abstract
Polycyclic aromatic hydrocarbons (PAHs) are generated due to incomplete burning of organic substances. Use of fossil fuels is the primary anthropogenic cause of PAHs emission in natural settings. Although several PAH compounds exist in the natural environmental setting, only 16 of these compounds are considered priority pollutants. PAHs imposes several health impacts on humans and other living organisms due to their carcinogenic, mutagenic, or teratogenic properties. The specific characteristics of PAHs, such as their high hydrophobicity and low water solubility, influence their active adsorption onto soils and sediments, affecting their bioavailability and subsequent degradation. Therefore, this review first discusses various sources of PAHs, including source identification techniques, bioavailability, and interactions of PAHs with soils and sediments. Then this review addresses the remediation technologies adopted so far of PAHs in soils and sediments using immobilization techniques (capping, stabilization, dredging, and excavation), mobilization techniques (thermal desorption, washing, electrokinetics, and surfactant assisted), and biological degradation techniques. The pros and cons of each technology are discussed. A detailed systematic compilation of eco-friendly approaches used to degrade PAHs, such as phytoremediation, microbial remediation, and emerging hybrid or integrated technologies are reviewed along with case studies and provided prospects for future research.
Collapse
Affiliation(s)
- Manish Kumar
- CSIR-National Environmental Engineering Research Institute (CSIR-NEERI), Nehru Marg, Nagpur 440020, Maharashtra, India
| | - Nanthi S Bolan
- School of Agriculture and Environment, The University of Western Australia, Perth WA 6001, Australia; The UWA Institute of Agriculture, The University of Western Australia, Perth, WA 6001, Australia; College of Engineering, Science and Environment, University of Newcastle, Callaghan NSW, 2308, Australia
| | - Son A Hoang
- College of Engineering, Science and Environment, University of Newcastle, Callaghan NSW, 2308, Australia
| | - Ankush D Sawarkar
- Department of Computer Science and Engineering, Visvesvaraya National Institute of Technology (VNIT), Nagpur, Maharashtra, 440 010, India
| | - Tahereh Jasemizad
- Department of Civil and Environmental Engineering, Faculty of Engineering, The University of Auckland, Auckland 1010, New Zealand
| | - Bowen Gao
- Key Laboratory of Water and Sediment Sciences of Ministry of Education, State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing 100875, China
| | - S Keerthanan
- Ecosphere Resilience Research Center, Faculty of Applied Sciences, University of Sri Jayewardenepura, Nugegoda 10250, Sri Lanka
| | - Lokesh P Padhye
- Department of Civil and Environmental Engineering, Faculty of Engineering, The University of Auckland, Auckland 1010, New Zealand
| | - Lal Singh
- CSIR-National Environmental Engineering Research Institute (CSIR-NEERI), Nehru Marg, Nagpur 440020, Maharashtra, India
| | - Sunil Kumar
- CSIR-National Environmental Engineering Research Institute (CSIR-NEERI), Nehru Marg, Nagpur 440020, Maharashtra, India
| | - Meththika Vithanage
- Ecosphere Resilience Research Center, Faculty of Applied Sciences, University of Sri Jayewardenepura, Nugegoda 10250, Sri Lanka
| | - Yang Li
- Department of Environmental Engineering, China Jiliang University, Zhejiang, Hangzhou 310018, China
| | - Ming Zhang
- Department of Environmental Engineering, China Jiliang University, Zhejiang, Hangzhou 310018, China
| | - M B Kirkham
- Department of Agronomy, Kansas State University, Manhattan, KS, United States of America
| | - Ajayan Vinu
- Global Innovative Centre for Advanced Nanomaterials, School of Engineering, The University of Newcastle, Callaghan, NSW, 2308, Australia
| | - Jörg Rinklebe
- University of Wuppertal, School of Architecture and Civil Engineering, Institute of Foundation Engineering, Water- and Waste Management, Laboratory of Soil- and Groundwater Management, Pauluskirchstraße 7, 42285 Wuppertal, Germany; Department of Environment, Energy and Geoinformatics, Sejong University, Seoul 05006, Republic of Korea.
| |
Collapse
|
19
|
Ramesh Kumar A, Vaidya AN, Singh I, Ambekar K, Gurjar S, Prajapati A, Kanade GS, Hippargi G, Kale G, Bodkhe S. Leaching characteristics and hazard evaluation of bottom ash generated from common biomedical waste incinerators. JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH. PART A, TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING 2021; 56:1069-1079. [PMID: 34355647 DOI: 10.1080/10934529.2021.1962159] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/07/2021] [Revised: 07/21/2021] [Accepted: 07/21/2021] [Indexed: 05/24/2023]
Abstract
India has more than 202 biomedical waste incinerators, however, knowledge on the chemical characteristics of incinerator ash is lacking. The objective of this study was to evaluate the lecahablility characteristics of bottom ash and to study the levels of incineration by-products viz. polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs). Bottom ash samples from 13 common biomedical waste treatment facilities (CBMWTF) were colleted and subjected to leachig test, sequential extraction procedure (SEP) and PAHs and PCBs analysis. Among metals, cadmium, chromium, manganese, lead and zinc were found higher than the regulatory limits indicating its hazardous nature. SEP showed that substantial fraction of Cd (30%) and Zn (25%) were associated with leachable fractions, whereas metals such as Cr, Fe, Mn, and Ni were mainly associated with reducible, organics and residual fractions. Concentrations of USEPA 16 priority PAHs ranged between 0.17-12.67 mg kg-1 and the total toxic equivalents (TEQ) were in the range of 0.9-421.9 ng TEQ/g. PAHs with 4-rings dominated all the samples and accounted for 68% to total PAHs concentrations. Concentration of Σ19 PCB congeners ranged from 420.4 to 724.3 µg kg-1. PCBs homologue pattern was dominated by mono- to tetra chlorinated congeners (60-86%). The findings indicate the need for segregation of plastics from biomedical waste, improvement of combustion efficiency, and efficient air pollution control devices for the existing incinerators in CBMWTFs.
Collapse
Affiliation(s)
- A Ramesh Kumar
- CSIR-National Environmental Engineering Research Institute, Nagpur, India
| | | | - Ishan Singh
- CSIR-National Environmental Engineering Research Institute, Nagpur, India
| | - Kajal Ambekar
- CSIR-National Environmental Engineering Research Institute, Nagpur, India
| | - Suyog Gurjar
- CSIR-National Environmental Engineering Research Institute, Nagpur, India
| | - Archana Prajapati
- CSIR-National Environmental Engineering Research Institute, Nagpur, India
| | | | | | - Ganesh Kale
- CSIR-National Environmental Engineering Research Institute, Nagpur, India
| | - Sandeep Bodkhe
- CSIR-National Environmental Engineering Research Institute, Nagpur, India
| |
Collapse
|
20
|
Su G, Ong HC, Ibrahim S, Fattah IMR, Mofijur M, Chong CT. Valorisation of medical waste through pyrolysis for a cleaner environment: Progress and challenges. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2021; 279:116934. [PMID: 33744627 PMCID: PMC9756756 DOI: 10.1016/j.envpol.2021.116934] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/28/2020] [Revised: 02/22/2021] [Accepted: 03/09/2021] [Indexed: 05/19/2023]
Abstract
The COVID-19 pandemic has exerted great shocks and challenges to the environment, society and economy. Simultaneously, an intractable issue appeared: a considerable number of hazardous medical wastes have been generated from the hospitals, clinics, and other health care facilities, constituting a serious threat to public health and environmental sustainability without proper management. Traditional disposal methods like incineration, landfill and autoclaving are unable to reduce environmental burden due to the issues such as toxic gas release, large land occupation, and unsustainability. While the application of clean and safe pyrolysis technology on the medical wastes treatment to produce high-grade bioproducts has the potential to alleviate the situation. Besides, medical wastes are excellent and ideal raw materials, which possess high hydrogen, carbon content and heating value. Consequently, pyrolysis of medical wastes can deal with wastes and generate valuable products like bio-oil and biochar. Consequently, this paper presents a critical and comprehensive review of the pyrolysis of medical wastes. It demonstrates the feasibility of pyrolysis, which mainly includes pyrolysis characteristics, product properties, related problems, the prospects and future challenges of pyrolysis of medical wastes.
Collapse
Affiliation(s)
- Guangcan Su
- Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603, Kuala Lumpur, Malaysia
| | - Hwai Chyuan Ong
- School of Information, Systems and Modelling, Faculty of Engineering and Information Technology, University of Technology Sydney, NSW, 2007, Australia.
| | - Shaliza Ibrahim
- Institute of Ocean and Earth Sciences (IOES), University of Malaya, 50603, Kuala Lumpur, Malaysia
| | - I M Rizwanul Fattah
- School of Information, Systems and Modelling, Faculty of Engineering and Information Technology, University of Technology Sydney, NSW, 2007, Australia
| | - M Mofijur
- School of Information, Systems and Modelling, Faculty of Engineering and Information Technology, University of Technology Sydney, NSW, 2007, Australia; Mechanical Engineering Department, Prince Mohammad Bin Fahad University, Al Khobar, 31952, Saudi Arabia
| | - Cheng Tung Chong
- China-UK Low Carbon College, Shanghai Jiao Tong University, Lingang, Shanghai, 201306, China
| |
Collapse
|
21
|
Ding Z, Chen H, Liu J, Cai H, Evrendilek F, Buyukada M. Pyrolysis dynamics of two medical plastic wastes: Drivers, behaviors, evolved gases, reaction mechanisms, and pathways. JOURNAL OF HAZARDOUS MATERIALS 2021; 402:123472. [PMID: 32731115 PMCID: PMC7362864 DOI: 10.1016/j.jhazmat.2020.123472] [Citation(s) in RCA: 37] [Impact Index Per Article: 12.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/06/2020] [Revised: 06/27/2020] [Accepted: 07/14/2020] [Indexed: 05/05/2023]
Abstract
The public has started to increasingly scrutinize the proper disposal and treatment of rapidly growing medical wastes, in particular, given the COVID-19 pandemic, raised awareness, and the advances in the health sector. This research aimed to characterize pyrolysis drivers, behaviors, products, reaction mechanisms, and pathways via TG-FTIR and Py-GC/MS analyses as a function of the two medical plastic wastes of syringes (SY) and medical bottles (MB), conversion degree, degradation stage, and the four heating rates (5,10, 20, and 40 °C/min). SY and MB pyrolysis ranged from 394.4 to 501 and from 417.9 to 517 °C, respectively. The average activation energy was 246.5 and 268.51 kJ/mol for the SY and MB devolatilization, respectively. MB appeared to exhibit a better pyrolysis performance with a higher degradation rate and less residues. The most suitable reaction mechanisms belonged to a geometrical contraction model (R2) for the SY pyrolysis and to a nucleation growth model (A1.2) for the MB pyrolysis. The main evolved gases were C4-C24 alkenes and dienes for SY and C6-C41 alkanes and C8-C41 alkenes for MB. The pyrolysis dynamics and reaction pathways of the medical plastic wastes have important implications for waste stream reduction, pollution control, and reactor optimization.
Collapse
Affiliation(s)
- Ziyi Ding
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, China
| | - Huashan Chen
- Guoke (Foshan) Testing and Certification Co., Ltd., Foshan 528000, China
| | - Jingyong Liu
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, China.
| | - Haiming Cai
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, China
| | - Fatih Evrendilek
- Department of Environmental Engineering, Bolu Abant Izzet Baysal University, Bolu 14052, Turkey
| | - Musa Buyukada
- Department of Chemical Engineering, Bolu Abant Izzet Baysal University, Bolu 14052, Turkey
| |
Collapse
|
22
|
Yang L, Yu X, Wu X, Wang J, Yan X, Jiang S, Chen Z. Emergency response to the explosive growth of health care wastes during COVID-19 pandemic in Wuhan, China. RESOURCES, CONSERVATION, AND RECYCLING 2021; 164:105074. [PMID: 32834492 PMCID: PMC7434318 DOI: 10.1016/j.resconrec.2020.105074] [Citation(s) in RCA: 24] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/29/2020] [Revised: 07/22/2020] [Accepted: 07/26/2020] [Indexed: 05/18/2023]
Abstract
During the Coronavirus Disease 2019 (COVID-19) as a worldwide pandemic, the security management of health care wastes (HCWs) has attracted increasing concern due to their high risk. In this paper, the integrated management of HCWs in Wuhan, the first COVID-19-outbreaking city with over ten millions of people completely locking down, was collected, investigated and analyzed. During the pandemic, municipal solid wastes (MSWs) from designated hospitals, Fangcang shelter hospitals, isolation locations and residential areas (e.g. face masks) were collected and categorized as HCWs due to the high infectiousness and strong survivability of COVID-19, and accordingly the average production of HCWs per 1000 persons in Wuhan explosively increased from 3.64 kg/d to 27.32 kg/d. Segregation, collection, storage, transportation and disposal of HCWs in Wuhan were discussed and outlined. Stationary facilities, mobile facilities, co-processing facilities (Incineration plants for MSWs) and nonlocal disposal were consecutively utilized to improve the disposal capacity, from 50 tons/d to 280.1 tons/d. Results indicated that stationary and co-processing facilities were preferential for HCWs disposal, while mobile facilities and nonlocal disposal acted as supplementary approaches. Overall, the improved system of HCWs management could meet the challenge of the explosive growth of HCWs production during COVID-19 pandemic in Wuhan. Furthermore, these practices could provide a reference for other densely populated metropolises.
Collapse
Affiliation(s)
- Lie Yang
- Hubei Key Laboratory of Mineral Resources Processing and Environment, School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan 430070, PR China
| | - Xiao Yu
- Wuhan Institute of Environmental Sanitation Science, Wuhan 430000, PR China
| | - Xiaolong Wu
- Hubei Solid Waste and Chemical Pollution Prevention Center, Wuhan 430000, PR China
| | - Jia Wang
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, Huazhong University of Science and Technology, Wuhan, 430074, PR China
| | - Xiaoke Yan
- Hubei Key Laboratory of Mineral Resources Processing and Environment, School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan 430070, PR China
| | - Shen Jiang
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, Huazhong University of Science and Technology, Wuhan, 430074, PR China
| | - Zhuqi Chen
- Hubei Provincial Engineering Laboratory of Solid Waste Treatment, Disposal and Recycling, Huazhong University of Science and Technology, Wuhan, 430074, PR China
- Key Laboratory of Material Chemistry for Energy Conversion and Storage, Ministry of Education, Hubei Key Laboratory of Material Chemistry and Service Failure, School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan, 430074, PR China
| |
Collapse
|
23
|
Abstract
The harmless treatments of medical waste have significantly drawn people’s attention owing to their risks to health-care staff, the public, and the environment. The traditional thermal technology for processing medical waste may cause indispensable secondary pollution such as dioxin, furan, and heavy metals, and infectious materials that may remain in the solid residual. Thermal plasma technologies offer advantages of effectively treating medical waste due to its high temperature and energy density, lower pollutant emissions, rapid start-up and shut-down, and smaller size of the installation. These benefits play roles in the treatment of medical waste on-site or off-site, especially when somewhere encounters an abnormally sharp increase in medical waste. This paper mainly introduces the typical thermal plasma processes of medical waste and its central component, plasma furnace. Meanwhile, how process parameters influence the formed gaseous and solid products, the performances of mass and volume reduction, pathogen destruction, and energy recovery, are discussed in detail. Finally, the mechanism of the thermal plasma process is also analyzed.
Collapse
Affiliation(s)
- Xiaowei Cai
- School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou, 510006 Guangdong China
| | - Changming Du
- School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou, 510006 Guangdong China
- Taizhou Institute of Zhejiang University, Taizhou, 317000 Zhejiang China
| |
Collapse
|
24
|
Akhbarizadeh R, Dobaradaran S, Amouei Torkmahalleh M, Saeedi R, Aibaghi R, Faraji Ghasemi F. Suspended fine particulate matter (PM 2.5), microplastics (MPs), and polycyclic aromatic hydrocarbons (PAHs) in air: Their possible relationships and health implications. ENVIRONMENTAL RESEARCH 2021; 192:110339. [PMID: 33068583 DOI: 10.1016/j.envres.2020.110339] [Citation(s) in RCA: 166] [Impact Index Per Article: 55.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/01/2020] [Revised: 09/27/2020] [Accepted: 10/06/2020] [Indexed: 05/02/2023]
Abstract
Exposure to fine particulate matter (PM2.5) and their associated microcontaminants have been linked to increased harmful effects on the human health. In this study, the possible relationships between PM2.5, microplastics (MPs), and polycyclic aromatic hydrocarbons (PAHs) were analyzed in an urban area of Bushehr port, in the northern part of the Persian Gulf. Presence, sources, and health risks of MPs and PAHs in both normal and dusty days were also investigated. The median of PM2.5 and ƩPAHs were 52.8 μg/m3 and 14.1 ng/m3, respectively, indicating high pollution levels especially in dusty days. The mean level of MPs in urban suspended PM2.5 was 5.2 items/m3. Fragments were the most abundant shape of identified MPs and polyethylene terephthalate (PET) was the most plastic types in urban dust of Bushehr port. The results revealed that PM2.5 and MPs may possibly act as a carrier for airborne MPs and PAHs, respectively. In addition, the significant positive relationships between MPs, wind speed and wind direction, confirmed that the MPs transportation were highly controlled by atmospheric condition. Moreover, the source identification methods and trajectory analyses indicated that petrogenic sources from both proximal and distal origins play an important role in the level of PAHs. The results of chronic health risk evaluation via inhalation revealed that PM2.5-bound PAHs had high potential cancer risk in winter, while, the estimated risks for non-carcinogenic PAHs were not considerable. In the case of MPs, the assessment of human intake of MPs via inhalation highlighted the possible risks for habitants.
Collapse
Affiliation(s)
- Razegheh Akhbarizadeh
- Systems Environmental Health and Energy Research Center, The Persian Gulf Biomedical Sciences Research Institute, Bushehr University of Medical Sciences, Bushehr, Iran; The Persian Gulf Marine Biotechnology Research Center, The Persian Gulf Biomedical Sciences Research Institute, Bushehr University of Medical Sciences, Bushehr, Iran
| | - Sina Dobaradaran
- Systems Environmental Health and Energy Research Center, The Persian Gulf Biomedical Sciences Research Institute, Bushehr University of Medical Sciences, Bushehr, Iran; Department of Environmental Health Engineering, Faculty of Health and Nutrition, Bushehr University of Medical Sciences, Bushehr, Iran; Instrumental Analytical Chemistry and Centre for Water and Environmental Research (ZWU), Faculty of Chemistry, University of Duisburg-Essen, Universitätsstr. 5, Essen, Germany.
| | - Mehdi Amouei Torkmahalleh
- Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Nur-Sultan, 010000, Kazakhstan
| | - Reza Saeedi
- Workplace Health Promotion Research Center, Shahid Beheshti University of Medical Sciences, Tehran, Iran; Department of Health, Safety and Environment, School of Public Health and Safety, Shahid Beheshti University of Medical Sciences, Tehran, Iran
| | - Roza Aibaghi
- Department of Environmental Health Engineering, Faculty of Health and Nutrition, Bushehr University of Medical Sciences, Bushehr, Iran
| | - Fatemeh Faraji Ghasemi
- Systems Environmental Health and Energy Research Center, The Persian Gulf Biomedical Sciences Research Institute, Bushehr University of Medical Sciences, Bushehr, Iran
| |
Collapse
|
25
|
Norouzian Baghani A, Bahmani Z, Sorooshian A, Farzadkia M, Nabizadeh R, Delikhoon M, Barkhordari A, Rezaei Kalantary R, Golbaz S, Kermani M, Ashournejad Q, Shahsavani A. Characterization of polycyclic aromatic hydrocarbons associated with PM10 emitted from the largest composting facility in the Middle East. TOXIN REV 2020. [DOI: 10.1080/15569543.2020.1737823] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
Affiliation(s)
- Abbas Norouzian Baghani
- Department of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran
| | - Zohreh Bahmani
- Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran
| | - Armin Sorooshian
- Department of Chemical and Environmental Engineering, University of Arizona, Tucson, Arizona, USA
- Department of Hydrology and Atmospheric Sciences, University of Arizona, Tucson, Arizona, USA
| | - Mahdi Farzadkia
- Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran
- Research Center for Environmental Health Technology, Iran University of Medical Sciences, Tehran, Iran
| | - Ramin Nabizadeh
- Department of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran
| | - Mahdieh Delikhoon
- Department of Occupational Health Engineering, School of Public Health, Isfahan University of Medical Sciences, Isfahan, Iran
| | - Abdullah Barkhordari
- Department of Occupational Health, School of Public Health, Shahroud University of Medical Sciences, Shahroud, Iran
| | - Roshanak Rezaei Kalantary
- Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran
- Research Center for Environmental Health Technology, Iran University of Medical Sciences, Tehran, Iran
| | - Somayeh Golbaz
- Department of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran
| | - Majid Kermani
- Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran
- Research Center for Environmental Health Technology, Iran University of Medical Sciences, Tehran, Iran
| | - Qadir Ashournejad
- Department of Remote Sensing & GIS, Faculty of Geography, University of Tehran, Tehran,Iran
| | - Abbas Shahsavani
- Environmental and Occupational Hazards Control Research Center, Shahid Beheshti University of Medical Sciences, Tehran, Iran
- Department of Environmental Health Engineering, School of Public Health and Safety, Shahid Beheshti University of Medical Sciences, Tehran, Iran
| |
Collapse
|
26
|
Orazi MM, Arias AH, Oliva AL, Ronda AC, Marcovecchio JE. Characterization of atmospheric and soil polycyclic aromatic hydrocarbons and evaluation of air-soil relationship in the Southwest of Buenos Aires province (Argentina). CHEMOSPHERE 2020; 240:124847. [PMID: 31568948 DOI: 10.1016/j.chemosphere.2019.124847] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/07/2018] [Revised: 07/29/2019] [Accepted: 09/11/2019] [Indexed: 06/10/2023]
Abstract
Sixteen polycyclic aromatic hydrocarbons (PAHs) proposed by the US EPA as priority were analyzed in air and soil samples in the Southwest of Buenos Aires, Argentina, in order to study the levels, distribution, sources and fugacity ratios of PAHs, evaluating the relationship between them. For this, 10 passive air samplers (XAD-2® resin) were deployed along the area and replaced three-monthly from January to December 2015. PAHs were analyzed through gas chromatography -mass spectrometry (GC-MS). Results obtained showed that total PAHs levels (∑16) ranged from 27.97 to 1052.99 ng m-3 and from 52.40 to 2118.34 ng. g-1 d.w. for air and soil samples, respectively. The highest air- PAHs levels were registered in Bahía Blanca city (1052.99 ng. m-3, d.w.) an urban-industrial site, while the highest soil-PAHs levels were found in La Vitícola (2118.34 ng. g-1, d.w.), a rural location closed to a high traffic national route. For all sites the highest levels were observed during the winter; however, both spatial and temporal variations were only statistically significant for certain specific PAHs. Diagnostic ratios + PCA, determined dominance of pyrolytic sources. Further, data showed that source of PAHs could be attributed to vehicular and industrial emissions (observed in all periods), biomass combustion (linked mainly to warm period) and domestic emissions (linked mainly to cold period). Finally, fugacity ratios resulted <1, indicating that soil and air samples were not in equilibrium for the majority of PAHs determining a net tendency of air PAHs towards deposition while soil acted principally as a sink.
Collapse
Affiliation(s)
- Melina M Orazi
- Instituto Argentino de Oceanografía (IADO - CONICET/UNS), Camino La Carrindanga Km 7.5, 8000, Bahía Blanca, Argentina.
| | - Andrés H Arias
- Instituto Argentino de Oceanografía (IADO - CONICET/UNS), Camino La Carrindanga Km 7.5, 8000, Bahía Blanca, Argentina; Departamento de Química, Universidad Nacional Del Sur, Av. Alem 1253, 8000, Bahía Blanca, Argentina.
| | - Ana L Oliva
- Instituto Argentino de Oceanografía (IADO - CONICET/UNS), Camino La Carrindanga Km 7.5, 8000, Bahía Blanca, Argentina.
| | - Ana C Ronda
- Instituto Argentino de Oceanografía (IADO - CONICET/UNS), Camino La Carrindanga Km 7.5, 8000, Bahía Blanca, Argentina; Departamento de Biología, Bioquímica y Farmacia, Universidad Nacional Del Sur, San Juan 670, 8000, Bahía Blanca, Argentina.
| | - Jorge E Marcovecchio
- Instituto Argentino de Oceanografía (IADO - CONICET/UNS), Camino La Carrindanga Km 7.5, 8000, Bahía Blanca, Argentina; Universidad de La Fraternidad de Agrupaciones Santo Tomás de Aquino, Gascón 3145, 7600, Mar Del Plata, Argentina; Universidad Tecnológica Nacional, FRBB, 11 de Abril 445, 8000, Bahía Blanca, Argentina; Academia Nacional de Ciencias Exactas, Físicas y Naturales (ANCEFN), Av. Alvear 1711, 4to Piso, 1014, Buenos Aires, Argentina.
| |
Collapse
|
27
|
Ansari M, Ehrampoush MH, Farzadkia M, Ahmadi E. Dynamic assessment of economic and environmental performance index and generation, composition, environmental and human health risks of hospital solid waste in developing countries; A state of the art of review. ENVIRONMENT INTERNATIONAL 2019; 132:105073. [PMID: 31421384 DOI: 10.1016/j.envint.2019.105073] [Citation(s) in RCA: 31] [Impact Index Per Article: 6.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/19/2019] [Revised: 07/30/2019] [Accepted: 07/30/2019] [Indexed: 05/22/2023]
Abstract
Many studies have been conducted on hospital solid waste management (HSWM) throughout the world, especially developing countries. This interdisciplinary study aims to summarize the available knowledge on the health and environmental risks of hospital solid waste (HSW) and also, develop a dynamic associational assessment among hospital solid waste generation rate (HSWGR), hospital solid waste composition (HSWC), gross domestic product (GDP) per capita, and environmental performance index (EPI) in some developing countries for the first time. The results of this study showed that researchers from India, China, Pakistan, Brazil, and Iran had found more evidence about the health, economic, and environmental issues in HSW than the other developing countries. The literature showed that the highest and lowest reported HSWGR (in national average level) belonged to Ethiopia (6.03) and India (0.24) kg bed -1 day-1, respectively. It has also been shown that all studied countries except Serbia, have higher levels of hazardous waste in their HSWC, based on the WHO's standard. Furthermore, the quantity and quality of HSW in developing countries depend on the service provided by the hospital, type of hospital, HSWM system, and the level of regional economic and culture. The association analysis showed that the EPI and GDP per capita of developing countries were significantly (p-value <0.05) associated with HSWGR, non-hazardous HSW, and hazardous HSW by the Spearman coefficients equal to 0.389, 0.118, -0.118, and 0.122, 0.216, and -0.346, respectively. However, it can be concluded that GDP per capita and EPI have a weak correlation with hazardous HSW and non-hazardous HSW. Moreover, HSW has many hazardous health and environmental risks such as dioxin and furan, that must be controlled and managed through implementing programs and policies based on sustainable development. As a final point, we believed that the present study can be considered to be a guide for future studies on HSWM in developing countries.
Collapse
Affiliation(s)
- Mohsen Ansari
- Environmental Science and Technology Research Center, Department of Environmental Health Engineering, Shahid Sadoughi University of Medical Sciences, Yazd, Iran; Student Research Committee, Shahid Sadoughi University of Medical Sciences, Yazd, Iran
| | - Mohammad Hassan Ehrampoush
- Environmental Science and Technology Research Center, Department of Environmental Health Engineering, Shahid Sadoughi University of Medical Sciences, Yazd, Iran
| | - Mahdi Farzadkia
- Research Center for Environmental Health Technology, Iran University of Medical Sciences, Tehran, Iran; Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran.
| | - Ehsan Ahmadi
- Department of Environmental Health Engineering, School of Public Health, Kashan University of Medical Sciences, Kashan, Iran; Students' Scientific Research Center (SSRC), Tehran University of Medical Sciences, Tehran, Iran
| |
Collapse
|
28
|
Peng N, Huang C, Su J. An experimental and kinetic study of thermal decomposition of phenanthrene. JOURNAL OF HAZARDOUS MATERIALS 2019; 365:565-571. [PMID: 30469036 DOI: 10.1016/j.jhazmat.2018.11.026] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/30/2018] [Revised: 10/22/2018] [Accepted: 11/06/2018] [Indexed: 06/09/2023]
Abstract
Polycyclic aromatic hydrocarbons (PAHs) have enormous potential hazards. It is necessary for China to propose more internationally stricter standards for PAHs, in order to improve the country's pollutant prevention and control policy system, and ultimately, provide institutional guarantees for implementing PAH emissions prevention and control. In this study, phenanthrene, a typical PAHs generated during municipal solid waste (MSW) to energy system, was applied as a model compound to study the thermal degradation mechanism during the combustion process. Combustion kinetics for the three major gaseous products, including hydrogen, methane, and carbon dioxide, were determined. Experimental results indicated that hydrogen was promoted compared to methane and carbon dioxide during the combustion of phenanthrene, especially in high oxygen concentrations. The apparent activation energy (Ea) of 8.299-11.51, 13.10-23.07, and 9.368-15.29 kJ/mol, pre-exponential factor (A) of 0.219-1.579, 5.034-10.12, and 6.553-15.51 s-1, and the reaction order (n) of 1.160-1.234, 1.059-1.305, and 1.636-1.774 were obtained for hydrogen, methane, and carbon dioxide, respectively. Research on combustion behavior of phenanthrene and reaction kinetics provides the theoretical basis for the high-temperature removal of PAHs as byproducts during the combustion of MSW in oxygen-rich atmosphere.
Collapse
Affiliation(s)
- Nana Peng
- School of Public Policy and Management, Tsinghua University, Beijing 100084, China
| | - Cui Huang
- School of Public Policy and Management, Tsinghua University, Beijing 100084, China.
| | - Jun Su
- School of Public Policy and Management, Tsinghua University, Beijing 100084, China
| |
Collapse
|
29
|
Wang C, Yang Z, Zhang Y, Zhang Z, Cai Z. PAHs and heavy metals in the surrounding soil of a cement plant Co-Processing hazardous waste. CHEMOSPHERE 2018; 210:247-256. [PMID: 30005346 DOI: 10.1016/j.chemosphere.2018.06.177] [Citation(s) in RCA: 33] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/09/2018] [Revised: 06/07/2018] [Accepted: 06/29/2018] [Indexed: 05/28/2023]
Abstract
The Chinese government is encouraging domestic cement producers to move from traditional coal power sources to the co-processing of waste as the primary energy source for the industry. In this study, 32 samples collected from the soil surrounding a cement plant in Beijing were analyzed for the presence of 16 U.S. EPA priority polycyclic aromatic hydrocarbons (PAHs) and 12 heavy metals. Ten samples were selected for polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) analysis. The pollution distribution patterns, sources, and potential risks to human health and the environment were investigated and evaluated. The highest concentrations of PCDD/Fs occurred 1200 m downwind from the cement plant. The levels of ∑16 PAHs ranged from 130.6 to 1134.3 μg kg-1 in the sampled soils. Source identification analysis suggested that the cement plant was the most likely source of PAH contamination. The concentrations of most of the heavy metals detected in the sampled soils were close to background levels, except for the levels of cadmium (Cd) and mercury (Hg), which were, on average, two times and six times higher than background values, respectively. The co-incineration of sludge, coal, and hazardous waste in the cement plant is a major contributing cause for the high levels of Hg in the surrounding soil. Risk assessment models, both the incremental lifetime cancer risks (ILCRs) for PAHs and the potential ecological risk index (RI) for heavy metals, indicate potential risks to the population and the environment surrounding the cement plant.
Collapse
Affiliation(s)
- Chen Wang
- State Key Laboratory of Environmental and Biological Analysis, Department of Chemistry, Hong Kong Baptist University, PR China; School of Environmental Science and Engineering and Key Laboratory of Municipal Solid Waste Recycling Technology and Management of Shenzhen City, Southern University of Science and Technology of China, Shenzhen, 518055, PR China
| | - Zhenzhou Yang
- Management and Department of Energy and Resource Engineering, College of Engineering, Peking University, Beijing 100871, PR China
| | - Yanhao Zhang
- State Key Laboratory of Environmental and Biological Analysis, Department of Chemistry, Hong Kong Baptist University, PR China
| | - Zuotai Zhang
- School of Environmental Science and Engineering and Key Laboratory of Municipal Solid Waste Recycling Technology and Management of Shenzhen City, Southern University of Science and Technology of China, Shenzhen, 518055, PR China.
| | - Zongwei Cai
- State Key Laboratory of Environmental and Biological Analysis, Department of Chemistry, Hong Kong Baptist University, PR China.
| |
Collapse
|
30
|
Liu F, Liu HQ, Wei GX, Zhang R, Liu GS, Zhou JH, Zeng TT. Detoxification of medical waste incinerator fly ash through successive flotation. SEP SCI TECHNOL 2018. [DOI: 10.1080/01496395.2018.1481091] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 10/28/2022]
Affiliation(s)
- Fang Liu
- School of Energy and Safety Engineering, Tianjin Chengjian University, Tianjin, China
| | - Han-Qiao Liu
- School of Energy and Safety Engineering, Tianjin Chengjian University, Tianjin, China
| | - Guo-Xia Wei
- School of Science, Tianjin Chengjian University, Tianjin, China
| | - Rui Zhang
- School of Energy and Safety Engineering, Tianjin Chengjian University, Tianjin, China
| | - Gui-Sheng Liu
- School of Energy and Safety Engineering, Tianjin Chengjian University, Tianjin, China
| | - Jian-Hua Zhou
- School of Energy and Safety Engineering, Tianjin Chengjian University, Tianjin, China
| | - Tong-Tong Zeng
- School of Energy and Safety Engineering, Tianjin Chengjian University, Tianjin, China
| |
Collapse
|
31
|
Qi Y, He J, Li Y, Yu X, Xiu FR, Deng Y, Gao X. A novel treatment method of PVC-medical waste by near-critical methanol: Dechlorination and additives recovery. WASTE MANAGEMENT (NEW YORK, N.Y.) 2018; 80:1-9. [PMID: 30454987 DOI: 10.1016/j.wasman.2018.08.052] [Citation(s) in RCA: 27] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/12/2018] [Revised: 07/31/2018] [Accepted: 08/30/2018] [Indexed: 05/13/2023]
Abstract
Before PVC-medical waste is subjected to a waste-to-energy recovery process, the dechlorination and the recovery of additives such as plasticizer, stabilizer, and lubricant are quite important and attractive. In this work, a novel process was developed for the dechlorination and the recovery of additives from PVC-medical waste such as tube for transfusion (TFT) and sample collector for urine (SCFU) by using near-critical methanol (NCM). Reaction temperature, solid-to-liquid ratio, and reaction time have significant effect on the dechlorination of TFT and SCFU in NCM. The order of dechlorination efficiency of the samples at the same reaction conditions is as follows: TFT > Pure PVC > SCFU. When reaction temperature was controlled at 250 °C (solid-to-liquid ratio of 1:10 g/mL, reaction time of 60 min), the dechlorination efficiency reached 90%. Plasticizer such as dibutyl phthalate (DBP), dioctyl phthalate (DOP), and dimethyl phthalate (DMP) could be efficiently extracted and recovered from TFT at 250 °C by the NCM process. The recovery efficiency of DBP, DOP, and DMP decreased significantly with increasing temperature due to the further decomposition and other secondary reactions. High level of hexadecanoic acid methyl ester and octadecanoic acid methyl ester can be obtained from SCFU at 250 °C by the NCM process because of the esterification between methanol and hexadecanoic acid/octadecanoic acid, which are the important stabilizers and lubricants generally used in rigid PVC. It is noteworthy that methanol can be circulated and reused in the NCM process. This result showed that the NCM process was beneficial for both the dechlorination and the additives recovery from PVC-medical waste, and had a widespread application prospect for the waste management of PVC wastes.
Collapse
Affiliation(s)
- Yingying Qi
- College of Geology and Environment, Xi'an University of Science and Technology, Xi'an 710054, People's Republic of China
| | - Jiahuan He
- College of Geology and Environment, Xi'an University of Science and Technology, Xi'an 710054, People's Republic of China
| | - Yifan Li
- College of Geology and Environment, Xi'an University of Science and Technology, Xi'an 710054, People's Republic of China
| | - Xuan Yu
- College of Geology and Environment, Xi'an University of Science and Technology, Xi'an 710054, People's Republic of China
| | - Fu-Rong Xiu
- College of Geology and Environment, Xi'an University of Science and Technology, Xi'an 710054, People's Republic of China.
| | - Yuehua Deng
- College of Geology and Environment, Xi'an University of Science and Technology, Xi'an 710054, People's Republic of China
| | - Xiang Gao
- College of Geology and Environment, Xi'an University of Science and Technology, Xi'an 710054, People's Republic of China
| |
Collapse
|
32
|
Characteristics and Treatment Methods of Medical Waste Incinerator Fly Ash: A Review. Processes (Basel) 2018. [DOI: 10.3390/pr6100173] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023] Open
Abstract
Medical waste incinerator fly ash (MWIFA) is quite different from municipal solid waste incinerator fly ash (MSWIFA) due to its special characteristics of high levels of chlorines, dioxins, carbon constituents, and heavy metals, which may cause irreversible harm to environment and human beings if managed improperly. However, treatment of MWIFA has rarely been specifically mentioned. In this review, various treatment techniques for MSWIFA, and their merits, demerits, applicability, and limitations for MWIFA are reviewed. Natural properties of MWIFA including the high contents of chlorine and carbonaceous matter that might affect the treatment effects of MWIFA are also depicted. Finally, several commendatory and feasible technologies such as roasting, residual carbon melting, the mechanochemical technique, flotation, and microwave treatment are recommended after an overall consideration of the special characteristics of MWIFA, balancing environmental, technological, economical information.
Collapse
|
33
|
Using Calcination Remediation to Stabilize Heavy Metals and Simultaneously Remove Polycyclic Aromatic Hydrocarbons in Soil. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH 2018; 15:ijerph15081731. [PMID: 30104500 PMCID: PMC6121654 DOI: 10.3390/ijerph15081731] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/08/2018] [Revised: 07/26/2018] [Accepted: 07/27/2018] [Indexed: 11/16/2022]
Abstract
Co-contaminated soils containing heavy metals and polycyclic aromatic hydrocarbons (PAHs) are an environmental and human health risk. Research into the remediation of these soils is imperative. In this paper, a novel investigation utilizing calcination technique to stabilize heavy metals and simultaneously remove PAHs in soil was conducted. Calcination temperature (300–700 °C) was observed to play a dominant role in heavy metal stabilization and PAH removal in soils. However, calcination time (0.5–8 h) had no significant effect on these contaminants during calcination at different temperatures. Considering the remediation cycle requirements and economic costs of engineering, we suggested that the optimal calcination condition for Zn, Cu, naphthalene, and fluoranthene was at 700 °C for 0.5 h, and the corresponding stabilization or removal efficiency values were 96.95%, 98.41%, 98.49%, and 98.04%, respectively. Results indicate that calcination as a remedial strategy exhibits a bright future for practical applications in the simultaneous stabilization of heavy metals and PAH removal from co-contaminated sites.
Collapse
|
34
|
Dat ND, Chang MB. Review on characteristics of PAHs in atmosphere, anthropogenic sources and control technologies. THE SCIENCE OF THE TOTAL ENVIRONMENT 2017; 609:682-693. [PMID: 28763665 DOI: 10.1016/j.scitotenv.2017.07.204] [Citation(s) in RCA: 192] [Impact Index Per Article: 27.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/28/2017] [Revised: 07/21/2017] [Accepted: 07/23/2017] [Indexed: 05/18/2023]
Abstract
Polycyclic aromatic hydrocarbons (PAHs) are a group of organic compounds composed of multiple aromatic rings. PAHs are ubiquitous atmospheric pollutants which are well-recognized as carcinogenic, teratogenic and genotoxic compounds. PAHs are released from incomplete combustion or pyrolysis of materials containing carbon and hydrogen, such as coal, oil, wood and petroleum products. Understanding the characteristics of PAHs in atmosphere, source profiles and technologies available for controlling PAHs emission is essential to reduce the impacts of PAHs. This paper offers an overview on concentration and distribution of atmospheric PAHs, emission factors and distribution of PAHs in different sources, and available control technologies. Characteristics of atmospheric PAHs vary with meteorological conditions and emission sources, while characteristics of PAHs emission depend on burned material and combustion condition. Combination of some technologies may be necessary for effective removal of both low-ring and high-ring PAHs.
Collapse
Affiliation(s)
- Nguyen-Duy Dat
- Graduate Institute of Environmental Engineering, National Central University, Chungli 320, Taiwan
| | - Moo Been Chang
- Graduate Institute of Environmental Engineering, National Central University, Chungli 320, Taiwan.
| |
Collapse
|
35
|
Kuppusamy S, Thavamani P, Venkateswarlu K, Lee YB, Naidu R, Megharaj M. Remediation approaches for polycyclic aromatic hydrocarbons (PAHs) contaminated soils: Technological constraints, emerging trends and future directions. CHEMOSPHERE 2017; 168:944-968. [PMID: 27823779 DOI: 10.1016/j.chemosphere.2016.10.115] [Citation(s) in RCA: 320] [Impact Index Per Article: 45.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/30/2016] [Revised: 10/26/2016] [Accepted: 10/27/2016] [Indexed: 05/22/2023]
Abstract
For more than a decade, the primary focus of environmental experts has been to adopt risk-based management approaches to cleanup PAH polluted sites that pose potentially destructive ecological consequences. This focus had led to the development of several physical, chemical, thermal and biological technologies that are widely implementable. Established remedial options available for treating PAH contaminated soils are incineration, thermal conduction, solvent extraction/soil washing, chemical oxidation, bioaugmentation, biostimulation, phytoremediation, composting/biopiles and bioreactors. Integrating physico-chemical and biological technologies is also widely practiced for better cleanup of PAH contaminated soils. Electrokinetic remediation, vermiremediation and biocatalyst assisted remediation are still at the development stage. Though several treatment methods to remediate PAH polluted soils currently exist, a comprehensive overview of all the available remediation technologies to date is necessary so that the right technology for field-level success is chosen. The objective of this review is to provide a critical overview in this respect, focusing only on the treatment options available for field soils and ignoring the spiked ones. The authors also propose the development of novel multifunctional green and sustainable systems like mixed cell culture system, biosurfactant flushing, transgenic approaches and nanoremediation in order to overcome the existing soil- contaminant- and microbial-associated technological limitations in tackling high molecular weight PAHs. The ultimate objective is to ensure the successful remediation of long-term PAH contaminated soils.
Collapse
Affiliation(s)
- Saranya Kuppusamy
- Institute of Agriculture and Life Science, Gyeongsang National University, Jinju, 52828, Republic of Korea; Centre for Environmental Risk Assessment and Remediation (CERAR), University of South Australia, Mawson Lakes, SA5095, Australia; Cooperative Research Centre for Contamination Assessment and Remediation of Environment (CRC CARE), PO Box 486, Salisbury South, SA5106, Australia.
| | - Palanisami Thavamani
- Cooperative Research Centre for Contamination Assessment and Remediation of Environment (CRC CARE), PO Box 486, Salisbury South, SA5106, Australia; Global Centre for Environmental Remediation (GCER), Faculty of Science and Information Technology, The University of Newcastle, Callaghan, NSW, 2308, Australia
| | - Kadiyala Venkateswarlu
- Formerly Department of Microbiology, Sri Krishnadevaraya University, Anantapur, 515055, India
| | - Yong Bok Lee
- Institute of Agriculture and Life Science, Gyeongsang National University, Jinju, 52828, Republic of Korea
| | - Ravi Naidu
- Centre for Environmental Risk Assessment and Remediation (CERAR), University of South Australia, Mawson Lakes, SA5095, Australia; Cooperative Research Centre for Contamination Assessment and Remediation of Environment (CRC CARE), PO Box 486, Salisbury South, SA5106, Australia; Global Centre for Environmental Remediation (GCER), Faculty of Science and Information Technology, The University of Newcastle, Callaghan, NSW, 2308, Australia
| | - Mallavarapu Megharaj
- Centre for Environmental Risk Assessment and Remediation (CERAR), University of South Australia, Mawson Lakes, SA5095, Australia; Cooperative Research Centre for Contamination Assessment and Remediation of Environment (CRC CARE), PO Box 486, Salisbury South, SA5106, Australia; Global Centre for Environmental Remediation (GCER), Faculty of Science and Information Technology, The University of Newcastle, Callaghan, NSW, 2308, Australia
| |
Collapse
|
36
|
Hsu WT, Liu MC, Hung PC, Chang SH, Chang MB. PAH emissions from coal combustion and waste incineration. JOURNAL OF HAZARDOUS MATERIALS 2016; 318:32-40. [PMID: 27391862 DOI: 10.1016/j.jhazmat.2016.06.038] [Citation(s) in RCA: 50] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/11/2016] [Revised: 06/13/2016] [Accepted: 06/20/2016] [Indexed: 05/20/2023]
Abstract
The characteristics of PAHs that are emitted by a municipal waste incinerator (MWI) and coal-fired power plant are examined via intensive sampling. Results of flue gas sampling reveal the potential for PAH formation within the selective catalytic reduction (SCR) system of a coal-fired power plant. In the large-scale MWI, the removal efficiency of PAHs achieved with the pilot-scaled catalytic filter (CF) exceeds that achieved by activated carbon injection with a bag filter (ACI+BF) owing to the effective destruction of gas-phase contaminants by a catalyst. A significantly lower PAH concentration (1640ng/g) was measured in fly ash from a CF module than from an ACI+BF system (5650ng/g). Replacing the ACI+BF system with CF technology would significantly reduce the discharge factor (including emission and fly ash) of PAHs from 251.6 to 77.8mg/ton-waste. The emission factors of PAHs that are obtained using ACI+BF and the CF system in the MWI are 8.05 and 7.13mg/ton, respectively. However, the emission factor of MWI is significantly higher than that of coal-fired power plant (1.56mg/ton). From the perspective of total environmental management to reduce PAH emissions, replacing the original ACI+BF process with a CF system is expected to reduce environmental impact thereof.
Collapse
Affiliation(s)
- Wei Ting Hsu
- Graduate Institute of Environmental Engineering, National Central University, 300 Jhong-da Road, Jhongli, Taoyuan 32001, Taiwan
| | - Mei Chen Liu
- Graduate Institute of Environmental Engineering, National Central University, 300 Jhong-da Road, Jhongli, Taoyuan 32001, Taiwan
| | - Pao Chen Hung
- Graduate Institute of Environmental Engineering, National Central University, 300 Jhong-da Road, Jhongli, Taoyuan 32001, Taiwan
| | - Shu Hao Chang
- Graduate Institute of Environmental Engineering, National Central University, 300 Jhong-da Road, Jhongli, Taoyuan 32001, Taiwan
| | - Moo Been Chang
- Graduate Institute of Environmental Engineering, National Central University, 300 Jhong-da Road, Jhongli, Taoyuan 32001, Taiwan.
| |
Collapse
|
37
|
Peng N, Li Y, Liu Z, Liu T, Gai C. Emission, distribution and toxicity of polycyclic aromatic hydrocarbons (PAHs) during municipal solid waste (MSW) and coal co-combustion. THE SCIENCE OF THE TOTAL ENVIRONMENT 2016; 565:1201-1207. [PMID: 27265733 DOI: 10.1016/j.scitotenv.2016.05.188] [Citation(s) in RCA: 32] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/11/2016] [Revised: 05/26/2016] [Accepted: 05/26/2016] [Indexed: 06/05/2023]
Abstract
Emission and distribution characteristics of polycyclic aromatic hydrocarbons (PAHs) were investigated during municipal solid waste (MSW) and coal combustion alone and MSW/coal blend (MSW weight fraction of 25%) co-combustion within a temperature range of 500°C-900°C. The results showed that for all combustion experiments, flue gas occupied the highest proportion of total PAHs and fly ash contained more high-ring PAHs. Moreover, the 3- and 4-ring PAHs accounted for the majority of total PAHs and Ant or Phe had the highest concentrations. Compared to coal, MSW combustion generated high levels of total PAHs with the range of 111.28μg/g-10,047.22μg/g and had high toxicity equivalent value (TEQ). MSW/coal co-combustion generated the smallest amounts of total PAHs and had the lowest TEQ than MSW and coal combustion alone. Significant synergistic interactions occurred between MSW and coal during co-combustion and the interactions suppressed the formation of PAHs, especially hazardous high-ring PAHs and decreased the TEQ. The present study indicated that the reduction of the yield and toxicity of PAHs can be achieved by co-combustion of MSW and coal.
Collapse
Affiliation(s)
- Nana Peng
- Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, China; University of Chinese Academy of Sciences, Beijing 100049, China
| | - Yi Li
- State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, PR China
| | - Zhengang Liu
- Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, China; University of Chinese Academy of Sciences, Beijing 100049, China.
| | - Tingting Liu
- Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, China; University of Chinese Academy of Sciences, Beijing 100049, China
| | - Chao Gai
- Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, China; University of Chinese Academy of Sciences, Beijing 100049, China
| |
Collapse
|
38
|
Zhang L, Wu L, Tian F, Wang Z. Retrospection-Simulation-Revision: Approach to the Analysis of the Composition and Characteristics of Medical Waste at a Disaster Relief Site. PLoS One 2016; 11:e0159261. [PMID: 27414649 PMCID: PMC4944931 DOI: 10.1371/journal.pone.0159261] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/01/2016] [Accepted: 06/29/2016] [Indexed: 11/18/2022] Open
Abstract
A large amount of medical waste is produced during disaster relief, posing a potential hazard to the habitat and the environment. A comprehensive understanding of the composition and characteristics of medical waste that requires management is one of the most basic steps in the development of a plan for medical waste management. Unfortunately, limited reliable information is available in the open literature on the characteristics of the medical waste that is generated at disaster relief sites. This paper discusses the analysis of the composition and characteristics of medical waste at a disaster relief site using the retrospection-simulation-revision method. For this study, we obtained 35 medical relief records of the Wenchuan Earthquake, Sichuan, May 2008 from a field cabin hospital. We first present a retrospective analysis of the relief medical records, and then, we simulate the medical waste generated in the affected areas. We ultimately determine the composition and characteristics of medical waste in the affected areas using untreated medical waste to revise the composition of the simulated medical waste. The results from 35 cases showed that the medical waste generated from disaster relief consists of the following: plastic (43.2%), biomass (26.3%), synthetic fiber (15.3%), rubber (6.6%), liquid (6.6%), inorganic salts (0.3%) and metals (1.7%). The bulk density of medical relief waste is 249 kg/m3, and the moisture content is 44.75%. The data should be provided to assist the collection, segregation, storage, transportation, disposal and contamination control of medical waste in affected areas. In this paper, we wish to introduce this research method of restoring the medical waste generated in disaster relief to readers and researchers. In addition, we hope more disaster relief agencies will become aware of the significance of medical case recording and storing. This may be very important for the environmental evaluation of medical waste in disaster areas, as well as for medical waste management and disposal.
Collapse
Affiliation(s)
- Li Zhang
- Institute of Medical Equipment, Academy of Military Medical Sciences, Tianjin, China
- Basic Courses Department, Logistics University of the Chinese People’s Armed Police Forces, Tianjin, China
| | - Lihua Wu
- Institute of Medical Equipment, Academy of Military Medical Sciences, Tianjin, China
| | - Feng Tian
- Institute of Medical Equipment, Academy of Military Medical Sciences, Tianjin, China
| | - Zheng Wang
- Institute of Medical Equipment, Academy of Military Medical Sciences, Tianjin, China
- * E-mail:
| |
Collapse
|
39
|
Melnyk A, Dettlaff A, Kuklińska K, Namieśnik J, Wolska L. Concentration and sources of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) in surface soil near a municipal solid waste (MSW) landfill. THE SCIENCE OF THE TOTAL ENVIRONMENT 2015; 530-531:18-27. [PMID: 26026405 DOI: 10.1016/j.scitotenv.2015.05.092] [Citation(s) in RCA: 40] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/18/2015] [Revised: 05/21/2015] [Accepted: 05/21/2015] [Indexed: 06/04/2023]
Abstract
Due to a continuous demand of land for infrastructural and residential development there is a public concern about the condition of surface soil near municipal solid waste landfills. A total of 12 surface (0-20 cm) soil samples from a territory near a landfill were collected and the concentration of 16 PAHs and 7 PCB congeners were investigated in these samples. Limits of detection were in the range of 0.038-1.2 μg/kg for PAHs and 0.025-0.041 μg/kg for PCBs. The total concentration of ∑ PAHs ranged from 892 to 3514 μg/kg with a mean of 1974 μg/kg. The total concentration of ∑ PCBs ranged from 2.5 to 12 μg/kg with a mean of 4.5 μg/kg. Data analyses allowed to state that the PAHs in surface soils near a landfill were principally from pyrogenic sources. Due to air transport, PAHs forming at the landfill are transported outside the landfill. PCB origin is not connected with the landfill. Aroclor 1242 can be the source of PCBs in several samples.
Collapse
Affiliation(s)
- A Melnyk
- Gdansk University of Technology (GUT), Chemical Faculty, 11/12, G. Narutowicza Str., 80-233 Gdansk, Poland.
| | - A Dettlaff
- Gdansk University of Technology (GUT), Chemical Faculty, 11/12, G. Narutowicza Str., 80-233 Gdansk, Poland
| | - K Kuklińska
- Gdansk University of Technology (GUT), Chemical Faculty, 11/12, G. Narutowicza Str., 80-233 Gdansk, Poland
| | - J Namieśnik
- Gdansk University of Technology (GUT), Chemical Faculty, 11/12, G. Narutowicza Str., 80-233 Gdansk, Poland
| | - L Wolska
- Gdansk University of Technology (GUT), Chemical Faculty, 11/12, G. Narutowicza Str., 80-233 Gdansk, Poland; Medical University of Gdansk, Faculty of Health Sciences with Subfaculty of Nursing, Dębowa Str. 3, 80-204 Gdańsk, Poland
| |
Collapse
|
40
|
Thakur V, Ramesh A. Healthcare waste management research: A structured analysis and review (2005-2014). WASTE MANAGEMENT & RESEARCH : THE JOURNAL OF THE INTERNATIONAL SOLID WASTES AND PUBLIC CLEANSING ASSOCIATION, ISWA 2015; 33:855-870. [PMID: 26268601 DOI: 10.1177/0734242x15594248] [Citation(s) in RCA: 34] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
The importance of healthcare waste management in preserving the environment and protecting the public cannot be denied. Past research has dealt with various issues in healthcare waste management and disposal, which spreads over various journals, pipeline research disciplines and research communities. Hence, this article analyses this scattered knowledge in a systematic manner, considering the period between January 2005 and July 2014. The purpose of this study is to: (i) identify the trends in healthcare waste management literature regarding journals published; (ii) main topics of research in healthcare waste management; (iii) methodologies used in healthcare waste management research; (iv) areas most frequently researched by researchers; and (v) determine the scope of future research in healthcare waste management. To this end, the authors conducted a systematic review of 176 articles on healthcare waste management taken from the following eight esteemed journals: International Journal of Environmental Health Research, International Journal of Healthcare Quality Assurance, Journal of Environmental Management, Journal of Hazardous Material, Journal of Material Cycles and Waste Management, Resources, Conservations and Recycling, Waste Management, and Waste Management & Research. The authors have applied both quantitative and qualitative approaches for analysis, and results will be useful in the following ways: (i) results will show importance of healthcare waste management in healthcare operations; (ii) findings will give a comparative view of the various publications; (c) study will shed light on future research areas.
Collapse
Affiliation(s)
- Vikas Thakur
- Department of Management Studies, Indian Institute of Technology Roorkee, Uttarakhand, India
| | - A Ramesh
- Department of Management Studies, Indian Institute of Technology Roorkee, Uttarakhand, India
| |
Collapse
|
41
|
Zhang L, Su X, Zhang Z, Liu S, Xiao Y, Sun M, Su J. Characterization of fly ash from a circulating fluidized bed incinerator of municipal solid waste. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2014; 21:12767-12779. [PMID: 24969433 DOI: 10.1007/s11356-014-3241-9] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/26/2014] [Accepted: 06/19/2014] [Indexed: 06/03/2023]
Abstract
Treatment and disposal of fly ash in China are becoming increasingly difficult, since its production has steadily risen and its features are uncertain. The excess pollutant components of fly ash are the key factor affecting its treatment and resource utilization. In this study, fly ash samples collected from a power plant with circulating fluidized incinerators of municipal solid waste (MSW) located in Shandong Province (eastern China) were studied. The results showed that there were no obvious seasonal differences in properties of fly ash. The content of total salt, Zn, and pH exceeded the national standards and low-ring polycyclic aromatic hydrocarbons (PAHs) and polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (Fs) were the main organic components of fly ash for this power plant, which posed great threats to the surrounding environment. The amount of Zn of fly ash was higher than other heavy metals, which should be due to alkaline batteries of MSW. The leachate of fly ash had low concentrations of heavy metals and the main soluble components were sulfates and chlorides. The major mineral crystals of fly ash were SiO2, CaSO4, and Fe2O3. The main organic pollutants were low-ring PAHs, polychlorinated PCDDs, and low-chlorinated PCDFs, and concentrations were lower than the limiting values of the national regulations. Additionally, the distribution of PCDD/Fs had either a positive or a negative linear correlation with fly ash and flue gas, which was associated with the chlorinated degree of PCDD/Fs. The analysis was conducted to fully understand the properties of fly ash and to take appropriate methods for further comprehensive utilization.
Collapse
Affiliation(s)
- Lin Zhang
- School of Environmental Science and Engineering, Shandong University, Jinan, 250100, China
| | | | | | | | | | | | | |
Collapse
|