A review of the fate of engineered nanomaterials in municipal solid waste streams

Degradation and Recondensation of Metal Oxide Nanoparticles in Laminar Premixed Flames

The behavior of technical nanoparticles at high temperatures was measured systematically to detect morphology changes under conditions relevant to the thermal treatment of end-of-life products containing engineered nanomaterials. The focus of this paper is on laboratory experiments, where we used a Bunsen-type burner to add titania and ceria particles to a laminar premixed flame. To evaluate the influence of temperature on particle size distributions, we used SMPS, ELPI and TEM analyses. To measure the temperature profile of the flame, we used coherent anti-Stokes Raman spectroscopy (CARS). The comprehensible data records show high temperatures by measurement and equilibrium calculation for different stoichiometries and argon admixtures. With this, we show that all technical metal oxide nanoparticle agglomerates investigated reform in flames at high temperatures. The originally large agglomerates of titania and ceria build very small nanoparticles (<10 nm/"peak 2") at starting temperatures of <2200 K and <1475 K, respectively (ceria: Tmelt = 2773 K, Tboil = 3873 K/titania: Tmelt = 2116 K, Tboil = 3245 K). Since the maximum flame temperatures are below the evaporation temperature of titania and ceria, enhanced vaporization of titania and ceria in the chemically reacting flame is assumed.

Probabilistic material flow analysis of released nano titanium dioxide in Mexico

Engineered Nanomaterials (ENMs) or products containing ENMs, known as nano-enabled products are commercialized globally by a large number of companies. Concern about the potential risks and negative impacts of releasing ENMs into the environment is under investigation. For this reason, methodologies to estimate the probable mass concentrations of ENMs released in different regions of the world have been developed. As a first attempt to estimate the probable mass flows of nanosized titanium dioxide (nano-TiO2) released in Mexico, we developed a Probabilistic Material Flow Analysis (PMFA) for 2015. The model describes probabilistic mass flows of released nano-TiO2 during the life cycle of sunscreens, coatings, ceramic, and other nano-enabled products, including the flows through the solid waste and wastewater management systems, as well as the transfer of nano-TiO2 to three environmental compartments (atmosphere, topsoil, and surface water). The PMFA incorporates the uncertainty related to the input data. We observed that the most significant nano-TiO2 flows occur to the surface water, landfill, and soil compartments, targeted as the main "hot-spots", where living organisms could be more exposed to this material. Further improvements in the model are needed due to some data gaps at some life cycle stages, for instance, solid waste management and reused wastewater manipulation for irrigation purposes. Finally, the model developed in this study can be adjusted to assess other ENM releases and can be beneficial for further investigation in fate modeling and environmental risk assessment.

Dietary exposure to nTiO2 reduces byssus performance of mussels under ocean warming

Nano‑titanium dioxide (nTiO₂) is a widely used nanomaterial posing potential ecological risk for marine ecosystems that might be enhanced by elevated temperatures such as expected during climate change. nTiO₂ may affect benthic filter feeders like mussels through waterborne exposures and via food chain due to the adsorption on/in algae. Mussel byssus are proteinaceous fibers secreted by byssal glands of the mussels for attachment. Byssus production and mechanical properties are sensitive to environmental stressors but the combined effects of warming and nTiO₂ on byssus performance of mussels are unclear hampering our understanding of the predation and dislodgement risk of mussels under the multiple stressor scenarios. We explored the effects of a short-term (14-day) single and combined exposures to warming (28 °C) and 100 μg L^-1 nTiO₂ (including food co-exposure) on the byssus performance of the thick shell mussel Mytilus coruscus. The mechanical strength (measured as the breaking force) of the byssal threads was impaired by warming and nTiO₂ (including food co-exposure), but the number and length of the byssal threads were increased. The mRNA expression levels of mussel foot proteins (mfp-3, mfp-5) and pre-collagens (preCOL-D, preCOL-P, preCOL-NG) were up-regulated to varying degrees, with the strongest effects induced by warming. This indicates that the physiological and molecular mechanisms of byssus secretion are plastic. However, downregulation of the mRNA expression of preCOL-D and preCOL-P under the combined warming and nTiO₂ exposures indicate the limits of these plasticity mechanisms and suggest that the attachment ability and survival of the mussels may be impaired if the pollution or temperature conditions further deteriorate.

Mechanical Recycling of Ethylene-Vinyl Acetate/Carbon Nanotube Nanocomposites: Processing, Thermal, Rheological, Mechanical and Electrical Behavior

Recycling polymer/carbon nanotube (CNT) nanocomposites is not well common, despite a growing interest in using polymer/carbon nanotube (CNT) nanocomposites in industrial applications. In this study, the influence of mechanical recycling on the thermal, rheological, mechanical and electrical behavior of ethylene-vinyl acetate (EVA)/CNT nanocomposites is investigated. EVA/CNT nanocomposite with different amounts of CNTs (1, 3 and 5 wt.%) was subjected to mechanical grinding and reprocessing by injection molding in a close-loop up to three cycles, and the changes induced by mechanical recycling were monitored by Differential Scanning Calorimetry (DSC), capillary rheology, scanning electron microscopy (SEM), electrical resistance and tensile tests. It was found that the EVA/CNT nanocomposites did not exhibit significant changes in thermal and flow behavior due to mechanical recycling and reprocessing. The recycled EVA/CNT nanocomposites retain close to 75% of the original elastic modulus after three recycling cycles and about 80-90% in the tensile strength, depending on the CNT loading. The electrical conductivity of the recycled nanocomposites was about one order of magnitude lower as compared with the virgin nanocomposites, spanning the insulating to semi-conducting range (10^-9 S/m-10^-2 S/m) depending on the CNT loading. With proper control of the injection molding temperature and CNT loading, a balance between the mechanical and electrical properties of the recycled EVA nanocomposites can be reached, showing a potential to be used in practical applications.

A two-dimensional nanoparticle characterization method combining differential mobility analyzer and single-particle inductively coupled plasma-mass spectrometry with an atomizer-enabled sample introduction (ATM-DMA-spICP-MS): Toward the analysis of heteroaggregated nanoparticles in wastewater

Characterizing engineered nanoparticles (ENPs) in complex environmental matrices remains a challenging task. This work presents a two-dimensional size analysis method by combining differential mobility analyzer (DMA) and single-particle inductively coupled plasma-mass spectrometry (spICP-MS) with a new atomizer (ATM)-enabled sample introduction that is relatively easy to operate. The tailing of electrical mobility size distributions was solved by heating the aerosol flow, where water-shelled gold nanoparticles (AuNPs) were dehydrated, effectively eliminating the tailing. The improved method has a good sizing performance and can resolve the size fractions of mixed 30 nm and 50 nm AuNPs. It can reliably analyze 7.8 × 10⁵ to 1.9 × 10⁷ # of 50 nm AuNPs (or 4.1 × 10⁵ to 10⁷ # NPs/mL, equivalent to 0.6 to 14.3 μg Au/L) with a linear response and a limit of detection of 7.8 × 10⁵ # AuNPs (equivalent to 4.1 × 10⁵ # AuNPs/mL) that is relevant to NP concentrations in surface water and wastewater samples. The potential of this method to analyze environmental samples was demonstrated by characterizing AuNPs and silver nanoparticles (AgNPs) spiked in wastewater, where both NPs were revealed to form heteroaggregates with colloids existing in wastewater. The method can even directly analyze nanosized Ag particles inherent in the wastewater before adding external AgNPs. The result indicates that ATM-DMA-spICP-MS is a relatively simple two-dimensional size analysis method that has a great potential to characterize heteroaggregated NPs in aqueous environmental samples.

Modeling, multi-response optimization, and performance reliability of green metal composites produced from municipal wastes

For the purpose of reducing and reusing municipal wastes, used aluminum products, waste glass, and rice husk were selected and reprocessed into green-metal composite. The process entailed recycling of waste glass and rice husk into glass powder (GP) and rice husk ash (RHA), respectively. These were employed as additives in recycled aluminum melt. Composite samples development entailed group mixes A, B, C, and D. Group mix A was prepared by the blend of 3 wt.% RHA at constant proportion with 2, 4, 6, 8, and 10 wt.% GP. Regarding group mixes B, C, D, the same proportion of GP was blended with 6, 9, 12% RHA at constant dosage respectively. Mechanical properties; tensile, impact, flexural and compressive strengths, and fracture toughness were investigated. The significance of the additives on the composites was appraised via performance reliability index (PRI) as a measure of effective property based on variable experimental inputs. From the results, the commix of 3% RHA and 4, 6, 8% GP; 6% RHA and 2, 4, 6% GP; 9% RHA and 2, 4% GP exhibited enhancement of effective property. The compressive strength of the composites was showcased to be the most improved mechanical property. Maximum improvement was obtained at the collage of 4% GP and 6% RHA, yielding a PRI of 1.35. Results of the ANOVA revealed that the experimental inputs had significant contribution on each property response. Mathematical models were developed for each property response, and multi-response optimization predicted an optimum mix of 3.93 wt.% GP and 6.14% RHA. The difference between the property value of the predicted and confirmation experiment is <  ± 0.05, validating the models.

Nanosafety: An Evolving Concept to Bring the Safest Possible Nanomaterials to Society and Environment

The use of nanomaterials has been increasing in recent times, and they are widely used in industries such as cosmetics, drugs, food, water treatment, and agriculture. The rapid development of new nanomaterials demands a set of approaches to evaluate the potential toxicity and risks related to them. In this regard, nanosafety has been using and adapting already existing methods (toxicological approach), but the unique characteristics of nanomaterials demand new approaches (nanotoxicology) to fully understand the potential toxicity, immunotoxicity, and (epi)genotoxicity. In addition, new technologies, such as organs-on-chips and sophisticated sensors, are under development and/or adaptation. All the information generated is used to develop new in silico approaches trying to predict the potential effects of newly developed materials. The overall evaluation of nanomaterials from their production to their final disposal chain is completed using the life cycle assessment (LCA), which is becoming an important element of nanosafety considering sustainability and environmental impact. In this review, we give an overview of all these elements of nanosafety.

Recycling chains for lithium-ion batteries: A critical examination of current challenges, opportunities and process dependencies

Lithium-ion batteries (LIBs) show high energy densities and are therefore used in a wide range of applications: from portable electronics to stationary energy storage systems and traction batteries used for e-mobility. Considering the projected increase in global demand for this energy storage technology, driven primarily by growth in e-vehicles, and looking at the criticality of some raw materials used in LIBs, the need for an efficient recycling strategy emerges. In this study, current state-of-the-art technologies for LIB recycling are reviewed and future opportunities and challenges, in particular to recover critical raw materials such as lithium or cobalt, are derived. Special attention is paid to the interrelationships between mechanical or thermal pre-treatment and hydro- or pyrometallurgical post-treatment processes. Thus, the unique approach of the article is to link processes beyond individual stages within the recycling chain. It was shown that influencing the physicochemical properties of intermediate products can lead to reduced recycling rates or even the exclusion of certain process options at the end of the recycling chain. More efforts are needed to improve information and data sharing on the exact composition of feedstock for recycling as well as on the processing history of intermediates to enable closed loop LIB recycling. The technical understanding of the interrelationships between different process combinations, such as pyrolytic or mechanical pre-treatment for LIB deactivation and metal separation, respectively, followed by hydrometallurgical treatment, is of crucial importance to increase recovery rates of cathodic metals such as cobalt, nickel, and lithium, but also of other battery components.

Engineered Nanomaterials in Soil: Their Impact on Soil Microbiome and Plant Health

A staggering number of nanomaterials-based products are being engineered and produced commercially. Many of these engineered nanomaterials (ENMs) are finally disposed into the soil through various routes in enormous quantities. Nanomaterials are also being specially tailored for their use in agriculture as nano-fertilizers, nano-pesticides, and nano-based biosensors, which is leading to their accumulation in the soil. The presence of ENMs considerably affects the soil microbiome, including the abundance and diversity of microbes. In addition, they also influence crucial microbial processes, such as nitrogen fixation, mineralization, and plant growth promoting activities. ENMs conduct in soil is typically dependent on various properties of ENMs and soil. Among nanoparticles, silver and zinc oxide have been extensively prepared and studied owing to their excellent industrial properties and well-known antimicrobial activities. Therefore, at this stage, it is imperative to understand how these ENMs influence the soil microbiome and related processes. These investigations will provide necessary information to regulate the applications of ENMs for sustainable agriculture and may help in increasing agrarian production. Therefore, this review discusses several such issues.

A critical review of the environmental impacts of manufactured nano-objects on earthworm species

The presence of manufactured nano-objects (MNOs) in various consumer or their (future large-scale) use as nanoagrochemical have increased with the rapid development of nanotechnology and therefore, concerns associated with its possible ecotoxicological effects are also arising. MNOs are releasing along the product life cycle, consequently accumulating in soils and other environmental matrices, and potentially leading to adverse effects on soil biota and their associated processes. Earthworms, of the group of Oligochaetes, are an ecologically significant group of organisms and play an important role in soil remediation, as well as acting as a potential vector for trophic transfer of MNOs through the food chain. This review presents a comprehensive and critical overview of toxic effects of MNOs on earthworms in soil system. We reviewed pathways of MNOs in agriculture soil environment with its expected production, release, and bioaccumulation. Furthermore, we thoroughly examined scientific literature from last ten years and critically evaluated the potential ecotoxicity of 16 different metal oxide or carbon-based MNO types. Various adverse effects on the different earthworm life stages have been reported, including reduction in growth rate, changes in biochemical and molecular markers, reproduction and survival rate. Importantly, this literature review reveals the scarcity of long-term toxicological data needed to actually characterize MNOs risks, as well as an understanding of mechanisms causing toxicity to earthworm species. This review sheds light on this knowledge gap as investigating bio-nano interplay in soil environment improves our major understanding for safer applications of MNOs in the agriculture environment.

Recent Advancements in the Nanomaterial Application in Concrete and Its Ecological Impact

At present, nanotechnology is a significant research area in different countries, owing to its immense ability along with its economic impact. Nanotechnology is the scientific study, development, manufacturing, and processing of structures and materials on a nanoscale level. It has tremendous application in different industries such as construction. This study discusses the various progressive uses of nanomaterials in concrete, as well as their related health risks and environmental impacts. Nanomaterials such as nanosilica, nano-TiO₂, carbon nanotubes (CNTs), ferric oxides, polycarboxylates, and nanocellulose have the capability to increase the durability of buildings by improving their mechanical and thermal properties. This could cause an indirect reduction in energy usage and total expenses in the concrete industry. However, due to the uncertainties and irregularities in size, shape, and chemical compositions, some nanosized materials might have harmful effects on the environment and human health. Acknowledgement of the possible beneficial impacts and inadvertent dangers of these nanosized materials to the environment will be extremely important when pursuing progress in the upcoming years. This research paper is expected to bring proper attention to the probable effects of construction waste, together with the importance of proper regulations, on the final disposal of the construction waste.

Release of carbon nanotubes during combustion of polymer nanocomposites in a pilot-scale facility for waste incineration

Nanocomposites, formed by incorporating nanoparticles into a matrix of standard materials, are increasing on the market. Little focus has been directed towards safe disposal and recycling of these new materials even though the disposal has been identified as a phase of the products' life cycle with a high risk of uncontrolled emissions of nanomaterials. In this study, we investigate if the carbon nanotubes (CNTs), when used as a filler in two types of polymers, are fully destructed in a pilot-scale combustion unit designed to mimic the combustion under waste incineration. The two polymer nanocomposites studied, polycarbonate (PC) with CNT and high-density polyethylene (HDPE) with CNT, were incinerated at two temperatures where the lower temperature just about fulfilled the European waste incineration directive while the upper was chosen to be on the safe side of fulfilling the directive. Particles in the flue gas were sampled and analysed with online and offline instrumentation along with samples of the bottom ash. CNTs could be identified in the flue gas in all experiments, although present to a greater extent when the CNTs were introduced in PC as compared to in HDPE. In the case of using PC as polymer matrix, CNTs were identified in 3-10% of the analysed SEM images while for HDPE in only ~0.5% of the images. In the case of PC, the presence of CNTs decreased with increasing bed temperature (from 10% to 3% of the images). The CNTs identified were always in bundles, often coated with remnants of the polymer, forming particles of ~1-4 μm in diameter. No CNTs were identified in the bottom ash, likely explained by the difference in time when the bottom ash and fly ash are exposed to high temperatures (~hours compared to seconds) in the pilot facility. The results suggest that the residence time of the fly ash in the combustion zone is not long enough to allow full oxidation of the CNTs. Thus, the current regulation on waste incineration (requiring a residence time of the flue gas >850 °C during at least 2 s) may not be enough to obtain complete destruction of CNTs in polymer composites. Since several types of CNTs are known to be toxic, we stress the need for further investigation of the fate and toxicity of CNTs in waste treatment processes.

Impact of Nanocomposite Combustion Aerosols on A549 Cells and a 3D Airway Model

The use of nanomaterials incorporated into plastic products is increasing steadily. By using nano-scaled filling materials, thermoplastics, such as polyethylene (PE), take advantage of the unique properties of nanomaterials (NM). The life cycle of these so-called nanocomposites (NC) usually ends with energetic recovery. However, the toxicity of these aerosols, which may consist of released NM as well as combustion-generated volatile compounds, is not fully understood. Within this study, model nanocomposites consisting of a PE matrix and nano-scaled filling material (TiO₂, CuO, carbon nano tubes (CNT)) were produced and subsequently incinerated using a lab-scale model burner. The combustion-generated aerosols were characterized with regard to particle release as well as compound composition. Subsequently, A549 cells and a reconstituted 3D lung cell culture model (MucilAir™, Epithelix) were exposed for 4 h to the respective aerosols. This approach enabled the parallel application of a complete aerosol, an aerosol under conditions of enhanced particle deposition using high voltage, and a filtered aerosol resulting in the sole gaseous phase. After 20 h post-incubation, cytotoxicity, inflammatory response (IL-8), transcriptional toxicity profiling, and genotoxicity were determined. Only the exposure toward combustion aerosols originated from PE-based materials induced cytotoxicity, genotoxicity, and transcriptional alterations in both cell models. In contrast, an inflammatory response in A549 cells was more evident after exposure toward aerosols of nano-scaled filler combustion, whereas the thermal decomposition of PE-based materials revealed an impaired IL-8 secretion. MucilAir™ tissue showed a pronounced inflammatory response after exposure to either combustion aerosols, except for nanocomposite combustion. In conclusion, this study supports the present knowledge on the release of nanomaterials after incineration of nano-enabled thermoplastics. Since in the case of PE-based combustion aerosols no major differences were evident between exposure to the complete aerosol and to the gaseous phase, adverse cellular effects could be deduced to the volatile organic compounds that are generated during incomplete combustion of NC.

Importance of the number emission factor of combustion-generated aerosols from nano-enabled products

Accidental or open waste burning and incineration of nano-enabled products (NEPs) might lead to the release of incidental aerosols in the nano size range into the environment resulting in harmful effects on humans. We have investigated combustion-generated aerosol release during accidental burning for several real-life NEPs such as paints with silica (SiO₂) and spruce wood panels containing SiO₂ and Fe₂O₃ nanomaterials (NMs), paper with SiO₂ and Fe₂O₃ NMs and polymeric composites with CuPhthtalocyanine NMs in poly lactic acid (PLA), polyamide 6 (PA6) and thermoplastic pol-urethane (TPU) matrices. Chemical compositions, aerosols number emission factors (n_efs) and concentrations of the signature elements of the NMs of the combustion-generated aerosols were investigated. In addition, the residual ash was analyzed. The outcomes of this study shed light on how NM and matrix types influenced the properties of the released aerosols. Based on our results it was established that the combustion-generated aerosols were composed of transformed NMs with modified physical-chemical characteristics compared to the pristine NMs. In addition to aerosols with transformed NMs, there were also particles due to incomplete combustion of the matrix. Types of the pristine NMs and matrices affected the characteristics of the released aerosols. Since the effect of the aerosols is related to the inhaled aerosol number concentration, the n_ef is an important parameter. Our results showed that the n_efs in the size range of 5.6 to 560 nm depended strongly on the type of combusted NEP, which indicated that the NEPs could be categorized according to their potential to release aerosols in this size range when they were burnt. The generated release data facilitate the assessment of human and environmental exposure and the associated risk assessment of combustion-generated aerosols from NEPs.

Integrated dynamic probabilistic material flow analysis of engineered materials in all European countries

Uncertainties remain regarding the potential environmental risks of engineered nanomaterials, reflecting missing information on both the exposure and the hazard sides. Probabilistic material flow analysis (PMFA) is a useful exposure assessment tool that maps the flows of a substance through its lifecycle towards the environment, taking into account the uncertainties associated with the input data. In the last years, several refinements have been made to the original PMFA method, increasing its complexity with respect to systems dynamics, fate during recycling and reprocessing and forms of release. In this work, an integrated dynamic probabilistic material flow analysis (IDPMFA) was developed that combines all separate advancements of the method in one overarching software code. The new method was used to assess the forms in which nano-Ag, nano-TiO₂ and nano-ZnO are released into air, soils and surface water. Each European country (EU28, Norway and Switzerland) was studied from the year 2000 to the year 2020. The present model includes new assessments of the forms in which nano-ZnO is released into the environment and of the flows out of reprocessing (last step of recycling) of nano-Ag, nano-TiO₂ and nano-ZnO towards both technical and environmental compartments. The forms of ZnO released to different compartments vary greatly with different proportions between pristine, dissolved, matrix-embedded and transformed forms. The same applies for the forms of the other ENMs released after reprocessing, where different processes result in very different distributions between the various forms. The country-specific assessment showed that it is mainly the different solid waste treatment schemes that influence the distribution to final environmental sinks. Overall, the results of IDPMFA show the great importance of considering the full life cycle of nanoproducts including the different stages of recycling, the differences between countries, and the forms of the released materials. The results from the integrated model will provide useful input information for environmental fate models and for environmental risk assessments.

Too small to matter? Physicochemical transformation and toxicity of engineered nTiO2, nSiO2, nZnO, carbon nanotubes, and nAg

Engineered nanomaterials (ENMs) refer to a relatively novel class of materials that are increasingly prevalent in various consumer products and industrial applications - most notably for their superlative physicochemical properties when compared with conventional materials. However, consumer products inevitably degrade over the course of their lifetime, releasing ENMs into the environment. These ENMs undergo physicochemical transformations and subsequently accumulate in the environment, possibly leading to various toxic effects. As a result, a significant number of studies have focused on identifying the possible transformations and environmental risks of ENMs, with the objective of ensuring a safe and responsible application of ENMs in consumer products. This review aims to consolidate the results from previous studies related to each stage of the pathway of ENMs from being embodied in a product to disintegration/transformation in the environment. The scope of this work was defined to include the five most prevalent ENMs based on recent projected production market data, namely: nTiO₂, nSiO₂, nZnO, carbon nanotubes, and nAg. The review focuses on: (i) models developed to estimate environmental concentrations of ENMs; (ii) the possible physicochemical transformations; (iii) cytotoxicity and genotoxicity effects specific to each ENM selected; and (iv) a discussion to identify potential gaps in the studies conducted and recommend areas where further investigation is warranted.

Evaluation of silver nanoparticles (AgNPs) penetration through a clay liner in landfills

Most products containing engineered nanomaterials are disposed at landfills in the final stage of their lifecycle. This study aims to assess landfill liners as a final barrier of disposed silver nanoparticles (AgNPs). Sorption and transport of AgNPs were investigated in the laboratory-scale simulation of landfill liner conditions. Field soil (silt loam) and bentonite were tested in batch sorption experiments respectively. To test transportation, 3 cm thick mixture of the field soil and the bentonite constituted the porous media to meet the criteria for compacted clay liner of landfill. Mathematical modeling in the experimental and actual landfill conditions was also conducted. The results demonstrated considerable extent of sorption by both types of sorbents. The breakthrough of AgNPs was not observed for 200 days (over 20 pore volume). In general, the experimental results indicated that AgNPs cannot easily pass through the landfill clay liner under present standards. Modeling results also showed that AgNPs could be blocked effectively. Although long-term tests are still required, these results clearly show resistance to current sanitary landfill liners against AgNP penetration. As the trial to assess the safety of landfills against AgNP migration, this work provides insights into the fate and transport of nanomaterials in the landfill environment.

Spectrophotometric Determination of p-Nitrophenol under ENP Interference

Engineered nanoparticles (ENPs) have been widely developed in various fields in recent years, resulting in an increasing occurrence of nanoparticles in the natural environment. However, the tiny substances have created unexpected confusion in environmental sample testing due to the negative nanoeffect of ENPs. In this paper, a novel technique of spectrophotometric determination of p-nitrophenol (PNP) was developed under the interfering impact of nano-Fe(OH)₃, widely distributed in the natural environment as a typical example of ENPs. Because of the strong absorption at the two characteristic peaks of PNP, namely, 317 nm and 400 nm, nano-Fe(OH)₃ interfered with the colorimetric determination of PNP. Thus, the developed testing method, with HCl acidification at 60°C and ascorbic acid (AA) masking FeCl₃, was proposed and successfully realized the accurate determination of PNP in water samples by ultraviolet spectrophotometry with 317 nm as the absorption wavelength. The final colorimetric system of 5% HCl, 10% CH₃OH, and 1% ascorbic acid was confirmed by optimized batch experiments, and the optimum condition of acidification pretreatment was heating at 60°C for 20 min. Further results demonstrated that the proposed novel method had good accuracy and reproducibility even in high-salinity natural water bodies such as groundwater and surface water. The testing technique presented in this paper provided an interesting and useful tool for problem solving of PNP surveys under ENPs' interference and practically supported water quality assessment for a better environment.

Assessment on landfill liners as the barrier against C60 nanoparticles

Owing to the increasing usage of nanomaterials, it is imperative to assess their potential impacts on natural systems, and in particular, investigate if existing barriers can prevent nanomaterial emission in landfills because they will be disposed in landfills at the end of their useful lives. This study inspected the behavior of colloidal fullerene (nC₆₀) in and around landfill liner materials. Sorption isotherm experiments using either natural soil or high density polyethylene geomembrane as sorbents showed that nC₆₀ was readily removed by sorption to soil and precipitation, while there was no sorption to geomembrane. To investigate transport through soil, nC₆₀ was injected into columns of compacted soil layers with a thickness of 3.3-4.2 cm and hydraulic conductivity <1 × 10^-7 cm/s. The nanoparticles rarely passed through the layers owing to self-aggregation and/or screening by the soil layer. When they were detected in the effluent, breakthrough curves of an extraordinary shape were produced, which is presumably attributed to surface modification of collectors by deposited nC₆₀. However, simulation using the obtained mass transport parameters showed that it is unlikely that nC₆₀ from disposed C₆₀-containing products would overcome compacted clay liners; therefore, its migration to the ambient environment would be negligible.

In vivo phytotoxicity, uptake, and translocation of PbS nanoparticles in maize (Zea mays L.) plants

PbS nanomaterials are of great concern because of their potential toxicity and unavoidable releases of multiple commercial applications of nanoparticles (NPs). Commercial NPs act as mediators of damage to plant cells and pose potential toxicity to plants and human health. The mechanisms involved in the toxicity, uptake, and biotranslocation of PbS NPs in plants are poorly understood. We synthesize 15 ± 6 nm PbS nanoparticles (NPs) and report the phytotoxicology, uptake, and translocation of PbS NPs in maize (Zea mays L.) plants under various hydroponic treatments (5 mg/L, 10 mg/L, 20 mg/L, 30 mg/L, 40 mg/L, 50 mg/L of PbS NPs, 1.5 mg/L Pb²⁺ ion and controls) for 15 days. The findings indicate that PbS NPs has phytotoxic effects on seeds germination and similar effects in root elongation. The PbS NPs significantly inhibites the biomass of shoots and roots, as well as root morphology compared with the controls. The PbS NPs can penetrate the epidermis of maize roots and bioaccumulate in shoots at higher concentrations than controls treated with Pb²⁺ ions. The observations are consistent with indices of biotranslocation factor and confirmed by STEM-EDS mapping. The results illustrate PbS NPs can enter the cell wall and exist in intercellular space and cytoplasm of the cortical cell of maize seedlings by apoplastic and symplastic pathways. This study highlights the importance of the uptake, phytotoxicity, and biotranslocation of PbS NPs in maize crops and demonstrates the possible transfer into human food as an outcome of the fate of PbS NPs in plants.

Mobility and fate of ligand stabilized semiconductor nanoparticles in landfill leachates

Semiconductor quantum dots (QDs) are nanocrystals used in diverse optoelectronics. At the end of their useful life they are likely to end up in landfills, where they could be mobilzed by infiltrating rain water. In this work, spectroscopic and light scattering techniques were employed to investigate the environmental fate of QDs exposed to leachates from Austrian landfill sites containing municipal solid and bulky wastes. Brij-58-coated CdSe QDs, a model for surfactant stabilized hydrophobic nanoparticles, primarily sedimented before being degraded on a slower timescale in the course of 6 months. In contrast, N-acetyl-l-cystein-coated CdTe QDs, which represent electrostatically stabilized nanoparticles with a small covalently linked stabilizing molecule, mainly underwent a degradation mechanism that was accelerated by temperature. 71-95 % of this QD type was still dispersed in all leachates after 6 months at low temperature. Leachate temperature and composition, such as the DOC, as well as the used particle coating determined the mechanistic route of clearance of sedimentation versus degradation. Our study shows, that mechanistic investigations are necessary to determine the persistence of nanoparticles depending on their coatings in waste matrices which can be further used to assess hazardous risks of such nanowastes.

Dynamic probabilistic material flow analysis of engineered nanomaterials in European waste treatment systems

Knowledge on the material flows of engineered nanomaterials (ENMs) is crucial for assessing their environmental risks. Waste management processes constitute important parts of material flow analyses as they affect large fractions of the ENMs. Accordingly, their detailed representation could substantially improve the models. Our goal was to consider the temporal variations of wastewater and solid waste management in the dynamic probabilistic material flow analysis of carbon nanotubes (CNTs), nano-Ag, -TiO₂ and -ZnO in Europe from 2000 to 2020. New input parameters included wastewater and solid waste management rates for each year. The uncertainties associated with these data were assessed based on the type of consulted source, the geographical representativeness and temporal concordance. Results show modal values of 10-27% of ENMs going from sorting to reprocessing. Large shares of environmental releases of nano-Ag and nano-ZnO end in surface water (4.9 t and 1700 t respectively in 2020), while sludge-treated soil as environmental compartment is receiving most of nano-TiO₂ (22,000 t in 2020) and CNTs (8.8 t in 2020). Discharges from wastewater management to the subsurface soil make this compartment the largest environmental sink of nano-Ag and nano-ZnO (30 t and 3860 t accumulated in 2020, respectively). Landfills represent significant stocks of ENMs, with 105 t, 2077 t, 69,000 t and 1042 t of nano-Ag, nano-ZnO, nano-TiO₂ and CNTs. This model includes detailed descriptions of waste management and sources of ENMs released at the European scale. However, a better understanding of the behaviour, i.e. fate and potential transformations of ENMs in reprocessing systems, is needed to complete the full assessment.

Translocation of transition metal oxide nanoparticles to breast milk and offspring: The necessity of bridging mother-offspring-integration toxicological assessments

Although infant nanomaterial exposure is a worldwide concern, breastfeeding transfer of transition metal-oxide nanoparticles to as well as their toxicity to offspring are still unclear. Breastfeeding transmits nutrition and immunity from mothers to their offspring; it also provides a portal for maternal toxins to enter offspring. Thus, a toxicology assessment of both mothers and their offspring should be established to monitor nanomaterial exposure during lactation. Here, we determined the effects of the exposure route on the biodistribution, biopersistence, and toxicology of nanoparticles (titanium dioxide, zinc oxide, and zirconium dioxide) in both mouse dams and their offspring. Oral and airway exposure routes were tested using gavage and intranasal administration, respectively. Biodistribution in the main organs (breast, liver, spleen, lung, kidney, intestine, and brain) and biopersistence in the blood and milk were determined using inductively coupled plasma mass spectrometry. Hematology and histomorphology analyses were performed to determine the toxicology of the nanoparticles. A reduced offspring body weight was found with the reduced nanoparticle size. Furthermore, both oral and airway exposure increased the nanoparticle concentrations in the main tissues and milk. More nanoparticles were transferred into maternal tissues and milk via airway exposure than via oral exposure. During the transfer of the metal from the exposed nanoparticles to milk, the immune cell pathway played a more important role in the airway route than in the oral exposure route. Finally, maternal exposure via both the oral and airway routes reduced the body weight and survival rate of their breastfeeding offspring, which could possibly be attributed to the toxicity of nanoparticles to blood cells and organs. In conclusion, maternal exposure to nanoparticles led to a reduced body weight and survival rate in breastfed offspring, and nanoparticle exposure via the airway route led to a higher immune response and tissue injury than that via the oral exposure route. This study suggests that the use of products containing metal nanoparticles in breastfeeding mothers and their offspring should be reconsidered to maintain a safe breastfeeding system.

Fate of nano titanium dioxide during combustion of engineered nanomaterial-containing waste in a municipal solid waste incineration plant

The market for products containing engineered nanomaterial (ENM) is constantly expanding. At the end of their lifecycle, a significant fraction of the products will be disposed as ENM-containing waste in thermal treatment plants. Up to now there are still uncertainties on the fate and behaviour of ENM during waste incineration. In our investigations, nano titanium dioxide (nTiO₂) was selected as an example for ENM, because of its high amount in consumer products and its relevance to the ENM-containing waste stream. Two test series were conducted at the municipal solid waste incineration plant "Gemeinschaftskraftwerk Schweinfurt". For each test series, background concentrations of titanium were measured first. Samples of bottom ash, bottom ash extractor water, fly ash (boiler ash, cyclone ash), flue gas cleaning products (spray absorber ash, fabric filter ash) and washing water from the wet scrubber were taken in order to determine the fate of nTiO₂. The flue gas was sampled at three points: after boiler, after cyclone and before stack. The experiments showed that most of the used reference material was located in the solid residues (i.e. bottom ash) while a smaller part was detected in the products of the flue gas cleaning. In the purified flue gas before the stack, the concentration was negligible. The flue gas cleaning system at the Gemeinschaftskraftwerk Schweinfurt complies with the requirements of the best available techniques and the results cannot be transferred to plants with lower standards.

Simultaneous removal of nitrogen and phosphorous by heterotrophic nitrification-aerobic denitrification of a metal resistant bacterium Pseudomonas putida strain NP5

A novel strain NP5 with efficient heterotrophic nitrification, aerobic denitrification and phosphorus accumulation ability was isolated and identified as Pseudomonas putida strain NP5. The removed ammonium and phosphate were mainly converted into intracellular components by assimilation, and negligible nitrification intermediates and N₂O were accumulated during heterotrophic nitrification. In addition, the optimal conditions for nutrient removal were: succinate as carbon source, C/N 10, P/N 0.2, temperature 30 °C, salinity 0% and shaking speed 160 rpm. Besides, strain NP5 possessed an exceptional heavy metal and nanoparticles resistance. Cr⁶⁺ was found to be the most toxic among the tested metals, and it could be removed simultaneously. Moreover, an obvious phosphorus release was observed under anaerobic condition, and repeated exposure to the anaerobic/aerobic conditions could significantly improve the nutrient removal. Furthermore, the successful expression of key enzymes for nitrogen and phosphorous removal provided additional evidence for possibility of simultaneous nitrification, denitrification and phosphorus removal.

Energy reserves and respiration rate in the earthworm Eisenia andrei after exposure to zinc in nanoparticle or ionic form

The energy budget is an indicator of an organism's overall condition. Changes in energy reserves and/or energy consumption have been used as biomarkers of toxic stress. To understand the effects of different forms and concentrations of Zn and the costs of effective Zn regulation by the earthworm Eisenia andrei, we performed a toxicokinetic experiment in which individuals were sampled over time to determine the available energy reserves (total carbohydrate, protein, and lipid content), energy consumption (measured at the cellular level and as the whole-animal respiration rate), and internal Zn concentration. The earthworms were exposed to ZnCl2 or zinc nanoparticles (ZnO-NPs) in Lufa 2.2 soil for 21 days (contamination phase), followed by 14 days of elimination in clean soil (decontamination phase). Carbohydrates were the only energy reserves with significantly lower levels following ZnO-NP 1000 treatment than following other treatments (p ≤ 0.00001) in the contamination phase. The total available energy reserves and protein content did not differ among treatments, but a significant effect of exposure time was observed (p ≤ 0.0001). Exposure to Zn (both ions and NPs) increased energy consumption at the cellular level, reflecting the high energy demand of the stress response. The results indicated that E. andrei can regulate internal Zn concentrations efficiently, regardless of form or concentration, without considerable impact on energy reserves or respiration rate.

Nanotoxicity of engineered nanomaterials (ENMs) to environmentally relevant beneficial soil bacteria - a critical review

Deposition of engineered nanomaterials (ENMs) in various environmental compartments is projected to continue rising exponentially. Terrestrial environments are expected to be the largest repository for environmentally released ENMs. Because ENMs are enriched in biosolids during wastewater treatment, agriculturally applied biosolids facilitate ENM exposure of key soil micro-organisms, such as plant growth-promoting rhizobacteria (PGPR). The ecological ramifications of increasing levels of ENM exposure of terrestrial micro-organisms are not clearly understood, but a growing body of research has investigated the toxicity of ENMs to various soil bacteria using a myriad of toxicity end-points and experimental procedures. This review explores what is known regarding ENM toxicity to important soil bacteria, with a focus on ENMs which are expected to accumulate in terrestrial ecosystems at the highest concentrations and pose the greatest potential threat to soil micro-organisms having potential indirect detrimental effects on plant growth. Knowledge gaps in the fundamental understanding of nanotoxicity to bacteria are identified, including the role of physicochemical properties of ENMs in toxicity responses, particularly in agriculturally relevant micro-organisms. Strategies for improving the impact of future research through the implementation of in-depth ENM characterization and use of necessary experimental controls are proposed. The future of nanotoxicological research employing microbial ecoreceptors is also explored, highlighting the need for continued research utilizing bacterial isolates while concurrently expanding efforts to study ENM-bacteria interactions in more complex environmentally relevant media, e.g. soil. Additionally, the particular importance of future work to extensively examine nanotoxicity in the context of bacterial ecosystem function, especially of plant growth-promoting agents, is proposed.

Review of analytical studies on TiO2 nanoparticles and particle aggregation, coagulation, flocculation, sedimentation, stabilization

Titanium dioxide (TiO₂) nanoparticles (NPs) have been widely used in industrial and consumer products. Comprehensive and accurate detection, characterization, and quantification of TiO₂ NPs are important for understanding the specific property, behavior, fate, and potential risk of TiO₂ NPs in natural and engineered environments. This review provides a summary of recent analytical studies of TiO₂ NPs and their aggregation, coagulation, flocculation, sedimentation, stabilization under a wide range of conditions and processes. Much attention is paid on sample preparation prior to an analytical procedure, analysis of particle size, morphology, structure, state, chemical composition, surface properties, etc., via measurements of light scattering and zeta potential, microscopy, spectroscopy, and related techniques. Recently, some advanced techniques have also been explored to characterize TiO₂ NPs and their behaviors in the environment. Many issues must be considered including distinction between engineered TiO₂ NPs and their naturally occurring counterparts, lack of reference materials, interlaboratory comparison, when analyzing low concentrations of TiO₂ NPs and their behaviors in complex matrices. No "ideal" technique has emerged as each technique has its own merits, biases, and limitations. Multi-method approach is highlighted to provide in-depth information. Improvements of analytical method for determination of TiO₂ NPs have been recommended to be together with exposure modelers and ecotoxicologists for maximum individual and mutual benefit. Future work should focus on developing analytical technology with the advantages of being reliable, sensitive, selective, reproducible, and capable of in situ detection in complicated sample system.