Determination of penicillin G and its degradation products in a penicillin production wastewater treatment plant and the receiving river

Spatiotemporal variations and priority ranking of emerging contaminants in nanwan reservoir: A case study from the agricultural region in huaihe river basin in China

The presence of emerging contaminants (ECs) in drinking water sources is an increasing concern, yet limited data exists on their occurrence and risk in the upper Huaihe River Basin, an important agricultural region in Central China. This study investigated 70 ECs, including pesticide and antibiotics in surface water from drinking water source areas in Nanwan Reservoir along the upper reaches of the Huaihe River Basin to prioritize the ECs based on ecological risk and health risk assessment. A total of 66 ECs were detected in the surface water at least once at the selected 38 sampling sites, with concentrations ranging from 0.04 to 2508 ng/L. Ecological risk assessment using the risk quotient (RQ) method revealed high risks (RQ > 1) from 7 ECs in the dry season and 15 ECs in the wet season, with triazine pesticides as the main contributors. Non-carcinogenic risks were below negligible levels, but carcinogenic risks from neonicotinoid and carbamate pesticides and macrolide antibiotics were concerning for teenagers. Ciprofloxacin exhibited a high level of resistance risk during the wet season. A multi-indicator prioritization approach integrating occurrence, risk, and chemical property data ranked 6 pesticides and 3 antibiotics as priority pollutants. The results highlight EC contamination of drinking water sources in this agriculturally-intensive region and the need for targeted monitoring and management to protect water quality.

Dipping Your Toe in The CURE Pool: Longitudinal Tracking of Instructors Suggests Use of a Short-Duration CURE Can Catalyze Expansion to Longer CURE Experiences

Course-based undergraduate research experiences (CUREs) are an effective method of engaging large numbers of students in authentic research but are associated with barriers to adoption. Short CURE modules may serve as a low-barrier entryway, but their effectiveness in promoting expansion has not been studied. The Prevalence of Antibiotic Resistance in the Environment (PARE) project is a modular CURE designed to be a low-barrier gateway into CURE use. In a series of interviews, we track and characterize use of PARE in 19 PARE-interested instructors throughout the Innovation-Decision Process described by Rogers' Diffusion of Innovations theory. The majority (16/19) implement PARE at least once, and a majority of these implementers (11/16) expanded use by the final interview. Three of four cases of discontinuance were due to a disruption such as moving institutions or a change in course assignment and occurred for community college faculty. Expanders expressed fewer personal challenges than nonexpanders. Overall analysis shows that perception of barriers is nuanced and impacted by the innovation itself, the institutional context, and one's own experiences. These results suggest that a short duration, low barrier CURE can serve as a catalyst for implementation of a longer duration CURE.

A penicillinase-modified poly(N-isopropylacrylamide-co-acrylamide) smart hydrogel biosensor with superior recyclability for sensitive and colorimetric detection of penicillin G

Antibiotics are widely used for treating bacterial infections. However, excessive or improper use of antibiotics can pose a serious threat to human health and water environments, and thus, developing cost-effective, portable and effective strategies to analyze and detect antibiotics is highly desired. Herein, we reported a responsive photonic hydrogel (RPH)-based optical biosensor (PPNAH) with superior recyclability for sensitive and colorimetric determination of a typical β-lactam antibiotic penicillin G (PG) in water. This sensor was composed of poly(N-isopropylacrylamide-co-acrylamide) smart hydrogel with incorporated penicillinase and Fe3O4@SiO2 colloidal photonic crystals (CPCs). The sensor could translate PG concentration signals into changes in the diffraction wavelength and structural color of the hydrogel. It possessed high sensitivity and selectivity to PG and excellent detection performances for other two typical β-lactam antibiotics. Most importantly, due to the unique thermosensitivity of the poly(N-isopropylacrylamide) moieties in the hydrogel, the PG-responded PPNAH sensor could be facilely regenerated via a simple physical method at least fifty times while without compromising its response performance. Besides, our sensor was suitable for monitoring the PG-contaminated environmental water and displayed satisfactory detection performances. Such a sensor possessed obvious advantages of superior recyclability, highly chemical stability, low production cost, easy fabrication, wide range of visual detection, simple and intuitive operation for PG detection, and environmental-friendliness, which holds great potential in sensitive and colorimetric detection of the PG residues in polluted water.

Water Purification Using Choline-Amino Acid Ionic Liquids: Removal of Amoxicillin

Antibiotics are the main active pharmaceutical ingredients (APIs) for the treatment and prevention (prophylaxis) of bacterial infections, for which they are essential for health preservation. However, depending on the target bacterial strain, an efficient treatment may imply weeks of continuous intake of antibiotics, whose unmetabolized fraction ends up in the wastewater system by human and animal excreta. The presence of these chemical compounds in wastewater is known to damage aquatic ecosystems and cause antibiotic resistance of pathogenic agents, which threatens the future application of these medicines. Aqueous two-phase systems (ATPSs), an emergent extraction technology for biomolecules such as proteins and vitamins, could provide more eco-friendly and cost-effective extractive alternatives given their nontoxicity and low energetic requirements. Moreover, choline-amino acid ([Ch][AA]) ionic liquids (also known as CAAILs or ChAAILs) are considered one of the greenest classes of ionic liquids due to their favorable biocompatibility, biodegradability, and ease of chemical synthesis. In this work, partition studies of amoxicillin were performed in three ATPSs containing dipotassium hydrogen phosphate (K2HPO4) and the CAAILs (cholinium l-alaninate, [Ch][Ala]; cholinium glycinate, [Ch][Gly]; and cholinium serinate, [Ch][Ser]) at 298.15 K and 0.1 MPa. To better characterize the extract and reduce errors in quantification, the effect of pH on the intensity and stability of the UV-vis spectra of amoxicillin was studied prior to the partition studies, and computational chemistry was used to validate the molecular structure of the synthesized ionic liquids. During experimental determinations, it was observed that the extraction of amoxicillin was favored by less polar ionic liquids, achieving maximum partition coefficients (K) and extraction efficiencies (E) of K = (16 ± 6)·101 and E / % = 97 ± 2, respectively, for {[Ch][Gly] (1) + K2HPO4 (2) + Water (3)} in the longest tie-line.

Effect of streptomycin sulphate on the nitrification system in activated sludge: insight into nitrification characteristic, antibiotic resistance gene and microbial community

Wastewater with residual streptomycin sulphate usually contains high content of ammonia-nitrogen. However, the biological removal process of ammonia-nitrogen under streptomycin sulphate circumstance was unclear. In this study, short-term and long-term effects of streptomycin sulphate on biological nitrification systems, including AOB, NOB, SAOR, SNOR and SNPR, were evaluated comprehensively. The results indicated IC50 for AOB and NOB were 7.5 and 6.6 mg/L. SAOR and SNPR could be decreased to 3.43 ± 0.52 mg N/(g MLSS·h) and 0.24 ± 0.03 mg N/(g MLSS·h) while the addition of streptomycin sulphate was 10 mg/L. When streptomycin sulphate addition was stopped, nitrification ability recovered slightly, SAOR and SNPR increased to 9.37 ± 0.36 mg N/(g MLSS·h) and 1.66 ± 0.49 mg N/(g MLSS·h), respectively. The protein of EPS increased gradually during the acclimatization process, and the maximal protein value was 68.24 mg/g MLSS on the 100th day, however, no significant change of polysaccharose was observed during the acclimatization process. High abundance of ARGs and intI1 was detected in effluent and sludge of the biological treatment system. The maximal relative abundance of aadA1 in the sludge appeared on the 140th day, and increased by 0.99 orders of magnitude. Biological diversity decreased significantly during the acclimatization process, relative abundance of nitrosomonas was changed from 9.07% to 38.68% on the 61st day, while relative abundance of nitrobacter was changed from 1.30% to 0.64%. It should be noted that relative abundances of nitrosomonas and nitrobacter were reduced to 16.17% and 0.25% on the 140th day. This study would be helpful for nitrogen removal in wastewater with antibiotic.

A combined evaluation of the characteristics and antibiotic resistance induction potential of antibiotic wastewater during the treatment process

Antibiotic wastewater contains a variety of pollutant stressors that can induce and promote antibiotic resistance (AR) when released into the environment. Although these substances are mostly in concentrations lower than those known to induce AR individually, it is possible that antibiotic wastewater discharge might still promote the AR transmission risk via additive or synergistic effects. However, the comprehensive effect of antibiotic wastewater on AR development has rarely been evaluated, and its treatment efficiency remains unknown. Here, samples were collected from different stages of a cephalosporin production wastewater treatment plant, and the potential AR induction effect of their chemical mixtures was explored through the exposure of the antibiotic-sensitive Escherichia coli K12 strain. Incubation with raw cephalosporin production wastewater significantly promoted mutation rates (3.6 × 103-9.3 × 103-fold) and minimum inhibition concentrations (6.0-6.7-fold) of E. coli against ampicillin and chloramphenicol. This may be attributed to the inhibition effect and oxidative stress of cephalosporin wastewater on E. coli. The AR induction effect of cephalosporin wastewater decreased after the coagulation sedimentation treatment and was completely removed after the full treatment process. A Pearson correlation analysis revealed that the reduction in the AR induction effect had a strong positive correlation with the removal of organics and biological toxicity. This indicates that the antibiotic wastewater treatment had a collaborative processing effect of conventional pollutants, toxicity, and the AR induction effect. This study illustrates the potential AR transmission risk of antibiotic wastewater and highlights the need for its adequate treatment.

Metagenomic insights into microorganisms and antibiotic resistance genes of waste antibiotic fermentation residues along production, storage and treatment processes

Antibiotic fermentation residue (AFR) is nutrient-rich solid waste generated from fermentative antibiotic production process. It is demonstrated that AFR contains high-concentration of remaining antibiotics, and thus may promote antibiotic resistance development in receiving environment or feeding farmed animals. However, the dominate microorganisms and antibiotic resistance genes (ARGs) in AFRs have not been adequately explored, hampering understanding on the potential antibiotic resistance risk development caused by AFRs. Herein, seven kinds of representative AFRs along their production, storage, and treatment processes were collected, and multiple methods including amplicon sequencing, metagenomic sequencing, and bioinformatic approaches were adopted to explore the biological characteristics of AFRs. As expected, antibiotic fermentation producer was found as the predominant species in raw AFRs, which were collected at the outlet of fermentation tanks. However, except for producer species, more environment-derived species persisted in stored AFRs, which were temporarily stored at a semi-open space. Lactobacillus genus, classified as Firmicutes phylum and Bacilli class, became predominant bacterial taxa in stored AFRs, which might attribute to its tolerance to high concentration of antibiotics. Results from metagenomic sequencing together with assembly and binning approaches showed that these newly-colonizing species (e.g., Lactobacillus genus) tended to carry ARGs conferring resistance to the remaining antibiotic. However, after thermal treatment, remaining antibiotic could be efficiently removed from AFRs, and microorganisms together with DNA could be strongly destroyed. In sum, the main risk from the AFRs was the remaining antibiotic, while environment-derived bacteria which tolerate extreme environment, survived in ARFs with high content antibiotics, and may carry ARGs. Thus, hydrothermal or other harmless treatment technologies are recommended to remove antibiotic content and inactivate bacteria before recycling of AFRs in pharmaceutical industry.

Cu2+ coordination-induced in situ photo-to-heat on catalytic sites to hydrolyze β-lactam antibiotics pollutants in waters

For degradation of β-lactam antibiotics pollution in waters, the strained β-lactam ring is the most toxic and resistant moiety to biodegrade and redox-chemically treat among their functional groups. Hydrolytically opening β-lactam ring with Lewis acid catalysts has long been recognized as a shortcut, but at room temperature, such hydrolysis is too slow to be deployed. Here, we found when Cu2+ was immobilized on imine-linked COF (covalent organic framework) (Cu2+/Py-Bpy-COF, Cu2+ load is 1.43 wt%), as-prepared composite can utilize the light irradiation (wavelength range simulated sunlight) to in situ heat anchored Cu2+ Lewis acid sites through an excellent photothermal conversion to open the β-lactam ring followed by a desired full-decarboxylation of hydrolysates. Under 1 W/cm2 simulated sunlight, Cu2+/Py-Bpy-COF powders placed in a microfiltration membrane rapidly cause a temperature rising even to ~211.7 °C in 1 min. It can effectively hydrolyze common β-lactam antibiotics in waters and even antibiotics concentration is as high as 1 mM and it takes less than 10 min. Such photo-heating hydrolysis rate is ~24 times as high as under dark and ~2 times as high as Cu2+ homogenous catalysis. Our strategy significantly decreases the interference from generally coexisting common organics in waters and potential toxicity concerns of residual carboxyl groups in hydrolysates and opens up an accessible way for the settlement of β-lactam antibiotics pollutants by the only energy source available, the sunlight.

Analysis and risk assessment of pharmaceutical residues in fish from three water bodies in Ghana

Illegal mining has overshadowed pharmaceutical pollution even though exposure to pharmaceutical waste is high. Consumption of fish potentially polluted with pharmaceuticals from the rivers continues with little concern or potential threat it poses. In the present study, the residues of one antibiotic (Chloramphenicol), five hormones (progesterone, 17-beta Estradiol, Estrone, 17a-Ethynylestradiol, and one), three environmental contaminants (4-para-nonylphenol, 4-tert-octylphenol, and Bisphenol A), one barbiturate (Primidone) and one analgesic (Diclofenac sodium salt), were investigated from fish samples from the rivers Pra, Narkwa, and the Volta. The results show a high concentration of drugs in River Pra in comparison to those in Rivers Narkwa and Volta. The hazard quotients (HQs) for the environmental contaminants were all above 1, except Bisphenol A. Furthermore, the HQs from this study suggest that consumers of fish from any of the three rivers stand a hazard risk of Chloramphenicol (19), 17a-Ethynylestradiol (4), Estrone (1.366), Diclofenac sodium salt (3.29), Progesterone (4.598), 4-tert-octylphenol (87.2), and 4-para-nonylphenol (7.252), but negligible risk against E2 (0.687), Primidone (0.014), Testosterone (0.16), and Bisphenol A (0.642). Of the fish species studied, the highest concentration of all pharmaceuticals put together is found in Clarias gariepinus, Labeo senegalensis, and Chrysichthys nigrodigitatus in that order.

Rapid Environmental Impact Assessment of Penicillin G in a Veterinary Product Using an Original Software Method and Monitoring by SPE-Online-UHPLC-MS/MS

Veterinary antibiotics have become a major concern due to potential environmental effects. This study presents an investigation of the exposure and environmental effects of the veterinary medicinal product in powder form, administered in the drinking water of piglets, chickens and turkeys, containing 250 mg/g penicillin G (benzylpenicillin potassium), performed according to the European Medicines Agency (EMEA) guideline and the results obtained by an analytical method based on online solid-phase extraction, ultra-high performance liquid chromatography coupled to a triple quadrupole mass spectrometer (SPE-online-UHPLC-MS/MS). The study presents the determination of the environmental risk and through an original, interactive, fast software method, created on the basis of a proprietary calculation algorithm that goes through all the prescriptions and recommendations of the EMEA guide. The results demonstrated that the concentration value for penicillin G determined in surface water by SPE-online-UHPLC-MS/MS is much lower than that predicted by calculation (predictable concentration in surface water, PECsurface water = 37.66 µg/L and the concentration SPE-online-UHPLC-MS/MS = 0.032 µg/L). Both results lead to a sub-unit risk quotient (R) indicating that the treatment carried out with the considered veterinary product does not present any risk to the environment.

Antimicrobial Transformation Products in the Aquatic Environment: Global Occurrence, Ecotoxicological Risks, and Potential of Antibiotic Resistance

The global spread of antimicrobial resistance (AMR) is concerning for the health of humans, animals, and the environment in a One Health perspective. Assessments of AMR and associated environmental hazards mostly focus on antimicrobial parent compounds, while largely overlooking their transformation products (TPs). This review lists antimicrobial TPs identified in surface water environments and examines their potential for AMR promotion, ecological risk, as well as human health and environmental hazards using in silico models. Our review also summarizes the key transformation compartments of TPs, related pathways for TPs reaching surface waters and methodologies for studying the fate of TPs. The 56 antimicrobial TPs covered by the review were prioritized via scoring and ranking of various risk and hazard parameters. Most data on occurrences to date have been reported in Europe, while little is known about antibiotic TPs in Africa, Central and South America, Asia, and Oceania. Occurrence data on antiviral TPs and other antibacterial TPs are even scarcer. We propose evaluation of structural similarity between parent compounds and TPs for TP risk assessment. We predicted a risk of AMR for 13 TPs, especially TPs of tetracyclines and macrolides. We estimated the ecotoxicological effect concentrations of TPs from the experimental effect data of the parent chemical for bacteria, algae and water fleas, scaled by potency differences predicted by quantitative structure-activity relationships (QSARs) for baseline toxicity and a scaling factor for structural similarity. Inclusion of TPs in mixtures with their parent increased the ecological risk quotient over the threshold of one for 7 of the 24 antimicrobials included in this analysis, while only one parent had a risk quotient above one. Thirteen TPs, from which 6 were macrolide TPs, posed a risk to at least one of the three tested species. There were 12/21 TPs identified that are likely to exhibit a similar or higher level of mutagenicity/carcinogenicity, respectively, than their parent compound, with tetracycline TPs often showing increased mutagenicity. Most TPs with increased carcinogenicity belonged to sulfonamides. Most of the TPs were predicted to be mobile but not bioaccumulative, and 14 were predicted to be persistent. The six highest-priority TPs originated from the tetracycline antibiotic family and antivirals. This review, and in particular our ranking of antimicrobial TPs of concern, can support authorities in planning related intervention strategies and source mitigation of antimicrobials toward a sustainable future.

Hybrid Cryogels with Superabsorbent Properties as Promising Materials for Penicillin G Retention

This present study describes the investigation of new promising hybrid cryogels able to retain high amounts of antibiotics, specifically penicillin G, using chitosan or chitosan-biocellulose blends along with a naturally occurring clay, i.e., kaolin. In order to evaluate and optimize the stability of cryogels, three types of chitosan were used in this study, as follows: (i) commercial chitosan; (ii) chitosan prepared in the laboratory from commercial chitin; and (iii) chitosan prepared in the laboratory from shrimp shells. Biocellulose and kaolin, previously functionalized with an organosilane, were also investigated in terms of their potential to improve the stability of cryogels during prolonged submergence under water. The organophilization and incorporation of the clay into the polymer matrix were confirmed by different characterization techniques (such as FTIR, TGA, SEM), while their stability in time underwater was investigated by swelling measurements. As final proof of their superabsorbent behavior, the cryogels were tested for antibiotic adsorption in batch experiments, in which case cryogels based on chitosan extracted from shrimp shells seem to exhibit excellent adsorption properties for penicillin G.

Nanoassemblies of acetylcholinesterase and β-lactamase immobilized on magnetic nanoparticles as biosensors to detect pollutants in water

The use of enzymes immobilized on magnetic nanoparticles to detect contaminants in aqueous samples has gained interest, since it allows the magnetic control, concentration and reuse of the enzymes. In this work, the detection of trace amounts of organophosphate pesticides (chlorpyrifos) and antibiotics (penicillin G) in water was attained by developing a nanoassembly formed by either inorganic or biomimetic magnetic nanoparticles used as substrates to immobilize acetylcholinesterase (AChE) and β-lactamase (BL). Other than the substrate, the optimization of the nanoassembly was done by testing enzyme immobilization both through electrostatic interaction (also reinforced with glutaraldehyde) and covalent bonds (by carbodiimide chemistry). Temperature (25 °C), ionic strength (150 mM NaCl) and pH (7) were set to ensure enzymatic stability and to allow both the nanoparticles and the enzymes to present ionic charges that would allow electrostatic interaction. Under these conditions, the enzyme load on the nanoparticles was ⁓0.1 mg enzyme per mg nanoparticles, and the preserved activity after immobilization was 50-60% of the specific activity of the free enzyme, being covalent bonding the one which yielded better results. Covalent nanoassemblies could detect trace concentrations of pollutants down to 1.43 nM chlorpyrifos and 0.28 nM penicillin G. They even permitted the quantification of 14.3 μM chlorpyrifos and 2.8 μM penicillin G. Also, immobilization conferred higher stability to AChE (⁓94% activity after 20 days storage at 4 °C) and allowed to reuse the BL up to 12 cycles.

Simultaneous determination of erythromycin and its transformation products in treated erythromycin fermentation residue and amended soil

Erythromycin fermentation residue (EFR) is a solid waste generated from the fermentation process of erythromycin A production. Some byproducts are produced during the fermentation process of erythromycin A production, and erythromycin A can also undergo hydrolysis and biodegradation reactions in the environment with the formation of transformation products. Herein, an accurate analytical method was established and validated to quantify erythromycin A, two byproducts and five hydrolysis or biodegradation products, in solid or semi-solid media of waste EFR and the amended soil. The method mainly included ultrasonic solvent extraction, solid phase extraction, and ultra-performance liquid chromatography-tandem mass spectrometry quantification. All analytes could be effectively extracted in a single process, and the recoveries ranged from 76% to 122% for different matrices. Low matrix effects and excellent precision were achieved by optimizing the mass spectrometry parameters, extraction solution, number of extractions and eluent. This method was applied to evaluate the residual analytes in EFR, treated EFR after industrial-scale hydrothermal treatment, and the subsequent soil application. Seven analytes were detected in the EFR, while six were found in the treated EFR and amended soils. The concentration of erythromycin A in EFR was 1,629 ± 100 mg/kg·TS, and the removal efficiency of hydrothermal treatment (180 °C, 60 min) was about 99.6%. Three hydrolysis products were the main residuals in treated EFR, with anhydroerythromycin A showing the highest concentration. The concentrations of the analytes in soil ranged from 2.17 ± 1.04 to 92.33 ± 20.70 μg/kg·TS, and anhydroerythromycin A contributed 65%-77% of the total concentration. Erythromycin B, a byproduct, was still detected in soil. This work provides an accurate analytical method which would be useful to evaluate the potential risk of byproducts and transformation products of erythromycin A in environment.

A label-free and selective SERS-based sensor for determination of ampicillin contamination in water using a fabric gold–silver alloy substrate with a handheld Raman spectrometer

A plasmonic Au–Ag alloy fabric substrate is developed via in situ self-assembly of Au–Ag alloy NPs on muslin fabric. An appropriate molar ratio of Au and Ag and type of substrate are proved to be key factors for selective detection of ampicillin.

Demonstrating a Comprehensive Wastewater-Based Surveillance Approach That Differentiates Globally Sourced Resistomes

Wastewater-based surveillance (WBS) for disease monitoring is highly promising but requires consistent methodologies that incorporate predetermined objectives, targets, and metrics. Herein, we describe a comprehensive metagenomics-based approach for global surveillance of antibiotic resistance in sewage that enables assessment of 1) which antibiotic resistance genes (ARGs) are shared across regions/communities; 2) which ARGs are discriminatory; and 3) factors associated with overall trends in ARGs, such as antibiotic concentrations. Across an internationally sourced transect of sewage samples collected using a centralized, standardized protocol, ARG relative abundances (16S rRNA gene-normalized) were highest in Hong Kong and India and lowest in Sweden and Switzerland, reflecting national policy, measured antibiotic concentrations, and metal resistance genes. Asian versus European/US resistomes were distinct, with macrolide-lincosamide-streptogramin, phenicol, quinolone, and tetracycline versus multidrug resistance ARGs being discriminatory, respectively. Regional trends in measured antibiotic concentrations differed from trends expected from public sales data. This could reflect unaccounted uses, captured only by the WBS approach. If properly benchmarked, antibiotic WBS might complement public sales and consumption statistics in the future. The WBS approach defined herein demonstrates multisite comparability and sensitivity to local/regional factors.

Treatment technologies for sustainable management of wastewater from iron and steel industry - a review

The iron and steel industries are a vital driving force for propelling the nation's economic growth. In 2019, to boost the economy and to achieve the target of five trillion economies by 2024, government of India entails investments in several steel-related sectors. However, since their inception, steel and iron industries have been coupled with extensive environmental pollution and vast water utilization. Discharged effluent from the different units of plant loaded with toxic, hazardous, and unused components which have various harmful environmental and health impacts and need treatment. In the present review, the pollutants treatment efficiency of various treatment techniques, effluent volume product quality, and various measures for sound management of wastewater are reviewed. As most conventional wastewater treatment methods are not sufficient for complete reclamation and remediation of effluent, the potential of more advanced treatment such as membrane separation and membrane bioreactors is relatively untouched. In the end, this paper concluded that the integrated system combining chemical treatment with membrane separation can ensure a worthy rate of pollutant removal. Reuse and effective management of wastewater with process intensification guarantee commercial viability and eco-friendliness.

The Current Status and Prevention of Antibiotic Pollution in Groundwater in China

The problem of environmental pollution caused by the abuse of antibiotics has received increasing attention. However, only in recent years have antibiotic pollution and its risk assessment to the environment been deeply studied. Although there has been a large number of reports about the input, occurrence, destination, and influence of antibiotics in the past 10 years, systemic knowledge of antibiotics in the groundwater environment is still lacking. This review systematically expounds the sources, migration and transformation, pollution status, and potential risks to the ecological environment of antibiotics in groundwater systems, by integrating 10 years of existing research results. The results showed that 47 kinds of antibiotics in four categories, mainly sulfonamides and fluoroquinolones, have been detected; antibiotics in groundwater species will induce the production of resistance genes and cause ecological harm. In view of the entire process of antibiotics entering groundwater, the current antibiotic control methods at various levels are listed, including the control of the discharge of antibiotics at source, the removal of antibiotics in water treatment plants, and the treatment of existing antibiotic contamination in groundwater. Additionally, the future research direction of antibiotics in groundwater is pointed out, and suggestions and prospects for antibiotic control are put forward.

Effects of pH and Metal Ions on the Hydrothermal Treatment of Penicillin: Kinetic, Pathway, and Antibacterial Activity

Antibiotic residues lead to the risk of resistance gene enrichment, which is the main reason why penicillin mycelial dreg (PMD) is defined as hazardous waste. Hydrothermal treatment (HT) is an effective method to treat penicillin mycelial dreg, but the degradation mechanism of penicillin is unclear. In the study, we researched the effects of pH (4-10) at 80-100 °C and metal ions (Mn²⁺, Fe²⁺, Cu²⁺, and Zn²⁺) at several concentrations on the HT of penicillin, identified the degradation products (DPs) under different conditions, and evaluated the antibacterial activity of hydrothermally treated samples. The results show that penicillin degradation kinetics highly consistent with pseudo-first-order model (R² = 0.9447-0.9999). The degradation rates (k) at pH = 4, 7, and 10 were 0.1603, 0.0039, and 0.0485 min^-1, indicating acidic conditions were more conducive to penicillin degradation. Among the four tested metal ions, Zn²⁺ had the most significant catalytic effect. Adding 5 mg·L^-1 Zn²⁺ caused 100% degradation rate at pH = 7 after HT for 60 min. Six degradation products (DPs) with low mass-to-charge (m/z ≤ 335) were detected under acidic condition. However, only two and three DPs were observed in the samples catalyzed by Zn²⁺ and alkali, respectively, and penilloic acid (m/z = 309) was the main DPs under these conditions. Furthermore, no antibacterial activity to Bacillus pumilus was detected in the medium with up to 50% addition of the treated samples under acidic condition. Even though acid, alkali, and some metal ions can improve the degradation ability of penicillin, it was found that the most effective way for removing its anti-bacterial activity was under the acidic condition. Therefore, resistance residue indicates the amount of additive in the process of resource utilization, and avoids the enrichment of resistance genes.

Penilloic acid is the chief culprit involved in non-IgE mediated, immediate penicillin-induced hypersensitivity reactions in mice

Metabolites/impurities (MIs) of penicillin are normally considered to be the main substances inducing immediate hypersensitivity reactions in penicillin treatment. Our previous research found that penicillin can cause non-allergic hypersensitivity reactions (NAHRs) by directly triggering vascular hyperpermeability and exudative inflammation. However, the chief culprits and underlying mechanisms involved in penicillin-induced NAHRs have not yet been fully elucidated. In this study, we used a combination of approaches including a mouse non-allergic hypersensitivity reaction model, UPLC-MS/MS analyses of arachidonic acid metabolites (AAMs), immunoblotting technique, and molecular docking, etc to investigate the culprits involved in penicillin-induced hypersensitivity reactions. We found penilloic acid, one of the main MIs of penicillin, could trigger NAHRs via inducing increased vascular permeability, while the other MIs did no exhibit similar effect. Penilloic acid-induced reactions were not IgE-dependent. Significantly increased arachidonic acids and cascade metabolites in lungs, and activation of RhoA/ROCK signaling pathway in the ears and lungs of mice were noticed after once administration of penilloic acid. This study revealed that penilloic acid was the chief culprit involved in penicillin-induced immediate NAHRs in mice, which mainly associated with direct stimulation of vascular hyperpermeability and exudative inflammation. The activations of AAMs and RhoA/ROCK signaling pathway played important roles in these reactions.

Engineering of a bacterial outer membrane vesicle to a nano-scale reactor for the biodegradation of β-lactam antibiotics

Bacterial outer membrane vesicles (OMVs) are small unilamellar proteoliposomes, which are involved in various functions including cell to cell signaling and protein excretion. Here, we have engineered the OMVs of Escherichia coli to nano-scaled bioreactors for the degradation of β-lactam antibiotics. This was exploited by targeting a β-lactamase (i.e., CMY-10) into the OMVs of a hyper-vesiculating E. coli BL21(DE3) mutant. The CMY-10-containing OMVs, prepared from the E. coli mutant cultures, were able to hydrolyze β-lactam ring of nitrocefin and meropenem to a specific rate of 6.6 × 10^-8 and 3.9 × 10^-12 μmol/min/µm³ of OMV, which is approximately 100 and 600-fold greater than those of E. coli-based whole-cell biocatalsyts. Furthermore, CMY-10, which was encapsulated in the engineered OMVs, was much more stable against temperature and acid stresses, as compared to free enzymes in aqueous phase. The OMV-based nano-scaled reaction system would be useful for the remediation of a variety of antibiotics pollution for food and agricultural industry.

Recent Advances and Perspectives on the Sources and Detection of Antibiotics in Aquatic Environments

Water quality and safety are vital to the ecological environment, social development, and ecological susceptibility. The extensive use and continuous discharge of antibiotics have caused serious water pollution; antibiotics are widely found in freshwater, drinking water, and reservoirs; and this pollution has become a common phenomenon and challenge in global water ecosystems, as water polluted by antibiotics poses serious risks to human health and the ecological environment. Therefore, the antibiotic content in water should be identified, monitored, and eliminated. Nevertheless, there is no single method that can detect all different types of antibiotics, so various techniques are often combined to produce reliable results. This review summarizes the sources of antibiotic pollution in water, covering three main aspects: (1) wastewater discharges from domestic sewage, (2) medical wastewater, and (3) animal physiology and aquaculture. The existing analytical techniques, including extraction techniques, conventional detection methods, and biosensors, are reviewed. The electrochemical biosensors have become a research hotspot in recent years because of their rapid detection, high efficiency, and portability, and the use of nanoparticles contributes to these outstanding qualities. Additionally, the comprehensive quality evaluation of various detection methods, including the linear detection range, detection limit (LOD), and recovery rate, is discussed, and the future of this research field is also prospected.

Metabolic Profiling and In Vitro Assessment of the Biological Activities of the Ethyl Acetate Extract of Penicillium chrysogenum “Endozoic of Cliona sp. Marine Sponge” from the Red Sea (Egypt)

Marine sponge-derived endozoic fungi have been gaining increasing importance as promising sources of numerous and unique bioactive compounds. This study investigates the phytochemical profile and biological activities of the ethyl acetate extract of Penicillium chrysogenum derived from Cliona sp. sponge. Thirty-six compounds were tentatively identified from P. chrysogenum ethyl acetate extract along with the kojic acid (KA) isolation. The UPLC-ESI-MS/MS positive ionization mode was used to analyze and identify the extract constituents while 1D and 2D NMR spectroscopy were used for kojic acid (KA) structure confirmation. The antimicrobial, antioxidant, and cytotoxic activities were assessed in vitro. Both the extract and kojic acid showed potent antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa with MIC 250 ± 0.82 µg/mL. Interestingly, the extract showed strong antifungal activity against Candida albicans and Cryptococcus neoformans with MIC 93.75 ± 0.55 and 19.53 ± 0.48 µg/mL, respectively. Furthermore, KA showed the same potency against Fusarium oxysporum and Cryptococcus neoformans with MIC 39.06 ± 0.85 and 39.06 ± 0.98 µg/mL, respectively. Ultimately, KA showed strong antioxidant activity with IC₅₀ 33.7 ± 0.8 µg/mL. Moreover, the extract and KA showed strong cytotoxic activity against colon carcinoma (with IC₅₀ 22.6 ± 0.8 and 23.4 ± 1.4 µg/mL, respectively) and human larynx carcinoma (with equal IC₅₀ 30.8 ± 1.3 and ± 2.1 µg/mL, respectively), respectively. The current study represents the first insights into the phytochemical profile and biological properties of P. chrysoenum ethyl acetate extract, which could be a promising source of valuable secondary metabolites with potent biological potentials.

The potential application of bio-based ceramic/organic xerogel derived from the plant sources: A new green adsorbent for removal of antibiotics from pharmaceutical wastewater

A bio-based ceramic/organic xerogel (BCO-xerogel) was obtained from the combination of sugarcane bagasse ash, polyvinyl alcohol, and pine cone-derived tannin extract, which are abundant, non-toxic, and renewable sources. The as-prepared BCO-xerogel was used as a low-cost green adsorbent for the eliminate of four types of the most widely used antibiotics, including amoxicillin (AMX), tetracycline (TC), cefalexin (CLX), and penicillin G (PEN G) residuals from contaminated water. The simultaneous effects conventional variables including adsorbent dosage, antibiotic concentrations, solution pH, and contact time were studied and optimized by central composite design (CCD) under response surface methodology (RSM). Analysis of variance (ANOVA) was employed as a statistical formula to determine the significance of operating environmental conditions and their interactions with 95% confidence limits. Under optimized conditions, the experimental removal efficiencies for AMX, TC, CLX, and PEN G were 98.78 ± 3.25, 99.12 ± 2.52, 98.02 ± 1.98, and 98.42 ± 2.19, respectively. The adsorption isotherms and kinetics were better fitted with Langmuir and pseudo-second-order models, respectively. Thermodynamic studies showed that the adsorption process was endothermic, spontaneous, and occurred by combination of physical and chemical mechanisms. Also, evaluating the ability of BCO-xerogel to adsorptive removal of AMX, TC, CLX, and PEN G antibiotics in real wastewaters showed about 97.4-98.6% adsorption efficiency in river water and about 67.1-71.3% in three hospital effluents. After the adsorption process, the antibiotic-loaded adsorbent was regenerated by NaOH (0.01 mol L^-1), and the reusability tests showed that the removal efficiencies of the antibiotics in the four recovery steps were still above 90%. This work explored the development of green, efficient, and economical bio-adsorbent that can be utilized for the removal of antibiotics from contaminated wastewaters.

Reduction of multiple antibiotics from the waste water using coated glutathione S-transferase producing biocatalyst

Oxytetracycline is widely used in veterinary and human medicine. It has been detected in wastewater from pharmaceuticals, hospitals and domestic wastewater. In recent years, much more attention has been directed towards glutathione transferases (GSTs) because of their bio-transforming ability of antibiotics. In this study, 19 Lactobacillus strains were initially screened for the production of GSTs and five strains were selected for biotransformation of oxytetracycline. Among the strains, L. fermentum LA6 improved oxytetracyline degradation than other strains. It was subjected to optimize GST production and optimum growth was achieved after 24 h incubation at 32 ± 2 °C and 200 mg/L initial oxytetracycline concentration. The biocatalyst was immobilized and antibiotic degradation efficiency was analyzed. The immobilized culture of L. fermentum LA6 improved biodegradation of oxytetracycline in the wastewater. At 50 mg/L initial antibiotic concentration, 53.2 ± 2.8% oxytetracycline degradation was achieved, however, it improved at 200 mg/L antibiotic concentration in the culture medium (89.1 ± 4.3%) after 24 h. The chemical oxygen demand (COD) of the wastewater decreased significantly after treatment. At 200 mg/L oxytetracycline concentration, COD removal was considerably high (93.6 ± 5.3 mg/L) than 150 mg/L oxytetracycline concentration in the medium. Antibiotic removal efficiency in immobilized form revealed that this method is highly suitable for the removal of antibiotics from the wastewater.

Determination of the lower limits of antibiotic biodegradation and the fate of antibiotic resistant genes in activated sludge: Both nitrifying bacteria and heterotrophic bacteria matter

Antibiotics can be biodegraded in activated sludge via co-metabolism and metabolism. In this study, we investigated the biodegradation pathways of sulfamethoxazole (SMX) and antibiotic resistant genes' (ARGs) fate in different autotrophic and heterotrophic microorganisms, by employing aerobic sludge, mixed sludge, and nitrifying sludge. A threshold concentration of SMX activating the degradation pathways in the initial stage of antibiotics degradation was found and proved in different activated sludge systems. Heterotrophic bacteria played an important role in SMX biodegradation. However, ammonia-oxidizing bacteria (AOB) had a faster metabolic rate, which was about 15 times higher than heterotrophic bacteria, contributing much to SMX removal via co-metabolism. As SMX concentration increases, the amoA gene and AOB relative abundance decreased in aerobic sludge due to the enrichment of functional heterotrophic bacteria, while it increased in nitrifying sludge. Microbial community analysis showed that functional bacteria which possess the capacity of SMX removal and antibiotic resistance were selected by SMX pressure. Potential ARGs hosts could increase their resistance to the biotoxicity of SMX and maintain system performance. These findings are of practical significance to guide antibiotic biodegradation and ARGs control in wastewater treatment plants.

Residual β-lactam antibiotics and ecotoxicity to Vibrio fischeri, Daphnia magna of pharmaceutical wastewater in the treatment process

The discharge of pharmaceutical wastewater introduces numerous pollutants into the environment, and their pollution level reduction has aroused extensive concern. This study investigated the variation in residual antibiotics and ecotoxicity to two nutritional-level model organisms in the pharmaceutical wastewater treatment process (PWTP). The wastewater in the equalization tank contained massive organic matters (2.9-18.7 times higher than the permissible values in GB21903-2008) and antibiotics (310.88 μg/L), posing extremely toxic effects to Vibrio fischeri (V. fischeri) and Daphnia magna (D. magna). The biological anaerobic/aerobic treatment units contributed the most to the reduction of antibiotics and the ecotoxicity to both organisms, with the removal rates of 72% and > 90%, respectively. The ecotoxicity of pharmaceutical wastewater was strongly and positively correlated with the residual antibiotics, amoxicillin, cephalexin, ammonia nitrogen, and total phosphorus (P < 0.05). However, the detected amounts of amoxicillin and cephalexin were approximately 10⁵ times lower than the predicted no-effect concentrations of amoxicillin and cephalexin to V. fischeri and D. magna in freshwater, which implied the joint ecotoxicity posed by multicomponent mixtures, such as the residual antibiotics and organic toxic substances, rather than the specific residual antibiotics. This study provides a better understanding of the variations and residual levels of pollutants in PWTPs, including their ecotoxicity risk to the aquatic environment, highlighting the need to optimize pharmaceutical wastewater treatment technologies.

Antimicrobial Resistance in Rivers: A Review of the Genes Detected and New Challenges

River ecosystems are very important parts of the water cycle and an excellent habitat, food, and drinking water source for many organisms, including humans. Antibiotics are emerging contaminants which can enter rivers from various sources. Several antibiotics and their related antibiotic resistance genes (ARGs) have been detected in these ecosystems by various research programs and could constitute a substantial problem. The presence of antibiotics and other resistance cofactors can boost the development of ARGs in the chromosomes or mobile genetic elements of natural bacteria in rivers. The ARGs in environmental bacteria can also be transferred to clinically important pathogens. However, antibiotics and their resistance genes are both not currently monitored by national or international authorities responsible for controlling the quality of water bodies. For example, they are not included in the contaminant list in the European Water Framework Directive or in the US list of Water-Quality Benchmarks for Contaminants. Although ARGs are naturally present in the environment, very few studies have focused on non-impacted rivers to assess the background ARG levels in rivers, which could provide some useful indications for future environmental regulation and legislation. The present study reviews the antibiotics and associated ARGs most commonly measured and detected in rivers, including the primary analysis tools used for their assessment. In addition, other factors that could enhance antibiotic resistance, such as the effects of chemical mixtures, the effects of climate change, and the potential effects of the coronavirus disease 2019 pandemic, are discussed. Environ Toxicol Chem 2022;41:687-714. © 2022 SETAC.

Presence of pharmaceuticals and their metabolites in wild-living aquatic organisms - Current state of knowledge

In the last decades an increasing number of studies has been published concerning contamination of aquatic ecosystems with pharmaceuticals. Yet, the distribution of these chemical compounds in aquatic environments raises many questions and uncertainties. Data on the presence of selected pharmaceuticals in the same water bodies varies significantly between different studies. Therefore, since early 1990 s, wild organisms have been used in research on environmental contamination with pharmaceuticals. Indeed, pharmaceutical levels measured in biological matrices may better reflect their overall presence in the aquatic environments as such levels include not only direct exposure of a given organisms to a specific pollutant but also processes such as bioaccumulation and biomagnification. In the present paper, data concerning occurrence of pharmaceuticals in aquatic biota was reviewed. So far, pharmaceuticals have been studied mainly in fish and molluscs, with only a few papers available on crustaceans and macroalgae. The most commonly found pharmaceuticals both in freshwater and marine organisms are antibiotics, antidepressants and NSAIDS while there is no information about the presence of anticancer drugs in aquatic organisms. Furthermore, only single studies were conducted in Africa and Australia. Hence, systematization of up-to-date knowledge, the main aim of this review, is needed for further research targeting.

Comprehensive Genomic Survey of Antimicrobial-Resistance Bacteria in the Sewage Tank Replacement with Hospital Relocation

Background

Excrement containing antimicrobial-resistant bacteria (ARB) is discharged from the hospital sewage through wastewater treatment plants (WWTP) into rivers, increasing the antimicrobial resistance (AMR) burden on the environment.

Purpose

We illustrate the contamination of hospital sewage tanks with ARB harboring antimicrobial resistance genes (ARGs) using comprehensive metagenomic sequencing. During the study period, we moved to a new hospital building constructed for renovation. Therefore, we investigated the difference in bacterial flora in the sewage tanks for each building with different departments, and the change in bacterial flora over time in new sewage tanks. Furthermore, we performed a comparative genome analysis of extended spectrum β-lactamase (ESBL)-producing organisms (EPOs) from hospital sewage and clinical samples. Residual antibiotics in the sewage tank were also measured.

Methods

Metagenomic analysis was performed on the hospital sewage samples, followed by whole genome sequencing of EPOs.

Results

The bacterial composition of new sewage tanks was comparable with that of old tanks within 1 month after relocation and was instantly affected by excrement. The bacterial composition of sewage tanks in the old and new buildings, containing rooms where seriously ill patients were treated, was similar. Selection on CHROMagar ESBL allowed detection of EPOs harboring bla_CTX-M and carbapenemase genes in all sewage tanks. One of the sewage Escherichia coli strain comprising ST393 harboring bla_CTX-M-27 corresponded to the clinical isolates based on core genome analysis. Moreover, the levels of levofloxacin and clarithromycin in the hospital sewage were 0.0325 and 0.0135 µg/mL, respectively.

Conclusion

Hospital sewage was contaminated with many ARB species, ARGs and residual antibiotics, which can cause a burden on WWTP sewage treatment. The bacterial flora in the sewage tank was rapidly affected, especially by the ward with seriously ill patients. AMR monitoring of hospital sewage may help detect carriers prior to nosocomial ARB-associated outbreaks and control the outbreaks.

Photocatalytic degradation of Penicillin G in aqueous solutions: Kinetic, degradation pathway, and microbioassays assessment

The photocatalytic degradation of pharmaceutical micropollutants of Penicillin G (PG) was investigated in a photoreactor at a laboratory scale. The impact of type of catalyst, pH, and initial concentration of PG were studied. Maximum removal efficiency was obtained at pH = 6.8, [ZnO]₀ = 0.8 g L^-1, and [PG]₀ = 5 mg L^-1 and reaction time of 150 min. The addition of persulfate sodium (PPS) enhanced the efficiency of the photocatalytic reaction. The efficiency of photolysis process in the presence of PPS was significantly improved to 72.72% compared to the classical photocatalysis system (56.71%). Optimum concentration of PPS to completely degraded PG was found to be 500 mg L^-1. The QuEChERS extraction, GC-MS/MS method, and concentration technique showed favorable performance identification of the possible mechanism of PG degradation pathway. Toxicity of PG and its by-products were evaluated using microbioassays assessment based on nine selected bacterial strains. Results confirmed the effectiveness of the implemented system and its safe use via the bacteria Bacillus subtilis, which has illustrated significant activity. Due to the high efficiency, facility benefits, and low-cost of the suggested process, the process can be considered for the degradation of various pharmaceutical contaminants in pharmaceutical industry treatment under the optimal conditions.

Hydrolytic transformation mechanism of tetracycline antibiotics: Reaction kinetics, products identification and determination in WWTPs

Antibiotic residues and antibiotic resistance have been widely reported in aquatic environments. Hydrolysis of antibiotics is one of the important environmental processes. Here we investigated the hydrolytic transformation of four tetracycline antibiotics i.e. tetracycline (TC), chlortetracycline (CTC), oxytetracycline (OTC) and doxycycline (DC) under different environmental conditions, and determined their parents and transformation products in the wastewater treatment plants (WWTPs). The results showed that the hydrolysis of the four tetracyclines followed first-order reaction kinetics, and the acid-catalyzed hydrolysis rates were significantly lower than the base-catalyzed and neutral pH hydrolysis rates. The effect of temperature on tetracycline hydrolysis was quantified by Arrhenius equation, with Ea values ranged from 42.0 kJ mol^-1 to 77.0 kJ mol^-1 at pH 7.0. In total, nine, six, eight and nine transformation products at three different pH conditions were identified for TC, CTC, OTC and DC, respectively. The main hydrolysis pathways involved the epimerization/isomerization, and dehydration. According to the mass balance analysis, 4-epi-tetracycline and iso-chlortetracycline were the main hydrolytic products for TC and CTC, respectively. The 2 tetracyclines and 4 hydrolysis products were found in the sludge samples in two WWTPs, with concentrations from 15.8 ng/g to 1418 ng/g. Preliminary toxicity evaluation for the tetracyclines and their hydrolysis products showed that some hydrolysis products had higher predicted toxicity than their parent compounds. These results suggest that the hydrolysis products of tetracycline antibiotics should also be included in environmental monitoring and risk assessment.

Safety of composts consisting of hydrothermally treated penicillin fermentation residue: Degradation products, antibiotic resistance genes and bacterial diversity

Combining hydrothermal treatment and composting is an effective method to dispose of penicillin fermentation residue (PFR), but the safety and related mechanism are still unclear. In this study, penicillin solution was hydrothermally treated to decipher its degradation mechanism, and then hydrothermally treated PFR (HT-PFR) was mixed with bulking agents at ratios of 2:0 (CK), 2:1.5 (T1), and 2:5 (T2) to determine the absolute abundance of antibiotic resistance genes (ARGs) and the succession of bacterial community. Results showed that penicillin was degraded to several new compounds without the initial lactam structure after hydrothermal treatment. During composting, temperature and pH of the composts increased with the raising of HT-PFR proportion, except the pH at days 2. After 52 days of composting, the absolute copies of ARGs (blaTEM, blaCMY2, and blaSFO) and the relative abundance of bacteria related to pathogens were reduced significantly (P < 0.05). Especially, the total amount of ARGs in the samples of CK and T1 were decreased to equal level (around 5 log₁₀ copies/g), which indicated that more ARGs were degraded in the latter by the composting process. In the CK samples, Bacteroidetes and Proteobacteria accounted for ~69.8% of the total bacteria, but they were gradually replaced by Firmicutes with increasing proportions of HT-PFR, which can be caused by the high protein content in PFR. Consisting with bacterial community, more gram-positive bacteria were observed in T1 and T2, and most of them are related to manganese oxidation and chitinolysis. As composting proceeded, bacteria having symbiotic or pathogenic relationships with animals and plants were reduced, but those related to ureolysis and cellulolysis were enriched. Above all, hydrothermal treatment is effective in destroying the lactam structure of penicillin, which makes that most ARGs and pathogenic bacteria are eliminated in the subsequent composting.

A Review of the Occurrence of Pharmaceutical Compounds as Emerging Contaminants in Treated Wastewater and Aquatic Environments

:

In recent years, pharmaceutical compounds have emerged as potential contaminants in the aquatic matrices of the environment. High production, consumption, and limited removal through conventional treatment processes/wastewater treatment plants (WWTPs) are the major causes for the occurrence of pharmaceutical compounds in wastewater and aquatic environments worldwide. A number of studies report adverse health effects and risks to aquatic life and the ecosystem because of the presence of pharmaceutical compounds in the aquatic environment. This paper provides a state-of-the-art review of the occurrence of pharmaceutical compounds in treated wastewater from various WWTPs, surface water and groundwater bodies. Additionally, this review provides comprehensive information and pointers for research in wastewater treatment and waterbodies management.

Photocatalytic Penicillin Degradation Performance and the Mechanism of the Fragmented TiO2 Modified by CdS Quantum Dots

In this study, a novel method was adopted to construct a CdS-TiO₂ heterostructure to degrade penicillin under sunlight. A potato extract was used during the synthesis process of CdS QDs as a stabilizer and a modifier. The CdS-TiO₂ composite with a heterostructure delivers high photocatalytic degradation efficiency. In detail, 0.6 mg/mL of CdS-TiO₂ can successfully decompose penicillin after 2 h, and 5‰ CdS-TiO₂ shows the optimal degradation efficiency with the degradation rate reaching 88%. Furthermore, the underlying mechanisms of the penicillin decomposition reaction were investigated by the EPR test and trapping experiment. It was found that the high photocatalytic degradation efficiency was attributed to the heterojunction of CdS-TiO₂, which successfully suppresses the recombination of the conduction band of CdS and the valence band of TiO₂. Moreover, it was confirmed that the reaction is the O₂-consuming process, and introducing O₂ can greatly accelerate the generation of a superoxide radical during the photocatalytic degradation process, which eventually improves the degradation of penicillin and shortens the degradation time. Finally, this work provides the possible penicillin degradation pathways, which will inspire the researchers to explore and design novel photocatalysts in the field of wastewater treatment in the future.

β-Lactam antibiotics and antibiotic resistance in Asian lakes and rivers: An overview of contamination, sources and detection methods

Lakes and rivers are sources of livelihood, food and water in many parts of the world. Lakes provide natural resources and valuable ecosystem services. These aquatic ecosystems are also vulnerable to known and new environmental pollutants. Emerging water contaminants are now being studied including antibiotics because of the global phenomenon on antibiotic resistance. β-Lactam antibiotics are widely used in human and animal disease prevention or treatment. The emergence of antibiotic resistance is a public health threat when bacteria become more resistant and infections consequently increase requiring treatment using last resort drugs that are more expensive. This review summarizes the key findings on the occurrence, contamination sources, and determination of β-lactam antibiotics and β-lactam antibiotic resistant bacteria and genes in the Asian lake and river waters. The current methods in the analytical measurements of β-lactam antibiotics in water involving solid-phase extraction and liquid chromatography-mass spectrometry are discussed. Also described is the determination of antibiotic resistance genes which is primarily based on a polymerase chain reaction method. To date, β-lactam antibiotics in the Asian aquatic environments are reported in the ng/L concentrations. Studies on β-lactam resistant bacteria and resistance genes were mostly conducted in China. The occurrence of these emerging contaminants is largely uncharted because many aquatic systems in the Asian region remain to be studied. Comprehensive investigations encompassing the environmental behavior of β-lactam antibiotics, emergence of resistant bacteria, transfer of resistance genes to non-resistant bacteria, multiple antibiotic resistance, and effects on aquatic biota are needed particularly in rivers and lakes that are eventual sinks of these water contaminants.

Enhanced visible-light photodegradation of fluoroquinolone-based antibiotics and E. coli growth inhibition using Ag-TiO2 nanoparticles

Antibiotics in wastewater represent a growing and worrying menace for environmental and human health fostering the spread of antimicrobial resistance. Titanium dioxide (TiO₂) is a well-studied and well-performing photocatalyst for wastewater treatment. However, it presents drawbacks linked with the high energy needed for its activation and the fast electron–hole pair recombination. In this work, TiO₂ nanoparticles were decorated with Ag nanoparticles by a facile photochemical reduction method to obtain an increased photocatalytic response under visible light. Although similar materials have been reported, we advanced this field by performing a study of the photocatalytic mechanism for Ag–TiO₂ nanoparticles (Ag–TiO₂ NPs) under visible light taking in consideration also the rutile phase of the TiO₂ nanoparticles. Moreover, we examined the Ag–TiO₂ NPs photocatalytic performance against two antibiotics from the same family. The obtained Ag–TiO₂ NPs were fully characterised. The results showed that Ag NPs (average size: 23.9 ± 18.3 nm) were homogeneously dispersed on the TiO₂ surface and the photo-response of the Ag–TiO₂ NPs was greatly enhanced in the visible light region when compared to TiO₂ P25. Hence, the obtained Ag–TiO₂ NPs showed excellent photocatalytic degradation efficiency towards the two fluoroquinolone-based antibiotics ciprofloxacin (92%) and norfloxacin (94%) after 240 min of visible light irradiation, demonstrating a possible application of these particles in wastewater treatment. In addition, it was also proved that, after five Ag–TiO₂ NPs re-utilisations in consecutive ciprofloxacin photodegradation reactions, only a photocatalytic efficiency drop of 8% was observed. Scavengers experiments demonstrated that the photocatalytic mechanism of ciprofloxacin degradation in the presence of Ag–TiO₂ NPs is mainly driven by holes and ˙OH radicals, and that the rutile phase in the system plays a crucial role. Finally, Ag–TiO₂ NPs showed also antibacterial activity towards Escherichia coli (E. coli) opening the avenue for a possible use of this material in hospital wastewater treatment.

Ag nanoparticles decorated-TiO₂ P25 are a viable alternative for the degradation, through a rutile-mediated mechanism, of fluoroquinolone-based antibiotics under visible light irradiation and, at the same time, for bacteria inactivation in water.

Kinetic Modeling for Photo-Assisted Penicillin G Degradation of (Mn0.5Zn0.5)[CdxFe2-x]O4 (x ≤ 0.05) Nanospinel Ferrites

Penicillin G is an old and widely used antibiotic. Its persistence in the environment started to appear in many environmental samples and food chains. The removal of these emerging pollutants has been a challenging task for scientists in the last decades. The photocatalytic properties of Cd²⁺ doped Manganese- Zinc NSFs with chemical formula (Mn_0.5Zn_0.5)[Cd_xFe_2−x]O₄ (0.0 ≤ x ≤ 0.05) NSFs are herein evaluated. The Manganese- Zinc N.S.F.s nanomaterials were deeply characterized, utilizing UV-Vis (reflectance) spectroscopy, X-ray diffraction, N₂ adsorption isotherm measurements, and S.E.M., SEM-EDX mapping, and T.E.M. The Kinetic model for the photodegradation of penicillin G (as a model molecule) is investigated using visible light as a source of energy. The kinetic study shows that our results fit well with the modified pseudo-first-order model. The Pen G degradation are 88.73%, 66.65%, 44.70%, 37.62% and 24.68% for x = 0.5, 0.4, 0.3, 0.2 and 0.1, respectively, against 14.68% for the free Cd spinel sample. The pseudo-rate constant is bandgap dependent. From the intra-diffusion rate constant (K_d), we developed an intra-diffusion time (τ) model, which decreases exponentially as a function of (x) and mainly shows the existence of three different domains versus cadmium coordination in spinel ferrite samples. Hence, Cadmium’s presence generates spontaneous polarization with a strong opportunity to monitor the charge separation and then open the route to a new generation of “assisted” photocatalysts under visible light.

Appraisal of suspended growth process for treatment of mixture of simulated petroleum, textile, domestic, agriculture and pharmaceutical wastewater

The unrestricted discharge of domestic and industrial wastewaters along with agricultural runoff water into the environment as mixed-wastewater pose serious threat to freshwater resources in many countries. Mixed-wastewater pollution is a common phenomenon in the developing countries as the technologies to treat the individual waste streams at source are lacking due to high operational and maintenance costs. Therefore, the need to explore the potential of the suspended growth process which is a well-established process technology for biological wastewater treatment is the focus of this paper. Different wastewater constituents: representing domestic, pharmaceutical, textile, petroleum, and agricultural runoff were synthesized as a representative of mixed-wastewater and treated in two semi-continuous bioreactors (R1 & R2) operated at constant operating conditions, namely MLSS (mg/L): 4640-R1, 4440-R2, SRT: 21-d, HRT: 48-72 h, and uncontrolled pH. The system attained stable condition in day 97, with average COD, BOD and TSS reduction as 84.5%, 86.2%, and 72.2% for R1; and 85.1%, 87.9%, and 75.1% for R2, respectively. Phosphate removal on average was by 74.3% in R1 and 76.6% in R2, while average nitrification achieved in systems 1 and 2 were 56.8% and 54.7%, respectively. The biological treatment system has shown potential for improving the quality of mixed-wastewater to the state where reuse may be considered and tertiary treatment can be employed to polish the effluent quality.

Dissipation and residue determination of penicillin G and its two metabolites in citrus under field conditions by DSPE/UPLC-MS/MS

A rapid determination method of residual penicillin G and its two metabolites in citrus was developed and validated by dispersive solid-phase extraction and ultra-high performance liquid chromatography-tandem mass spectrometry (DSPE/UPLC-MS/MS). The samples were extracted with 80% acetonitrile and purified with octadecylsilane. High linearity was obtained with correlation coefficients (r² ) >0.9981. The limits of quantification were 0.005-0.01 mg/kg. The recoveries of penicillin G and its metabolites spiked in blank citrus were within 76.7-107%, with relative standard deviations of 1.3-9.6%. The dissipation dynamics and distribution of penicillin G in citrus followed first-order kinetics, with half-life of 1.7-2.7 days. Penicillin G degraded easily in citrus and the metabolite was mainly penilloic acid, which can exist stably for long time. The terminal residues of penicillin G in pulp, whole citrus and peels were 0.015-0.701, 0.047-7.653 and 0.162-13.376 mg/kg, respectively. The hazard indexes for risk assessment of citrus were significantly <1, suggesting that the health risks to humans after consumption of citrus were insignificant and negligible. These results could provide necessary data for evaluating the safe and proper use of penicillin G in citrus.

Bacterial compositions in inhalable particulate matters from indoor and outdoor wastewater treatment processes

Wastewater treatment systems are critical microbial sources for urban air and play important roles in public health. In this study, bacterial communities in particulate matters (PM2.5, PM10) from wastewater/sludge treatment facilities of two full-scale wastewater treatment plants were analyzed by 16S rRNA amplicon sequencing. Compared to the background ambient air, Campylobacteriadeceae, Aeromonadaceae, and Chlostridiaceae were the most enriched bacteria above wastewater treatment facilities. In sludge dewatering facilities, Comamonadaceae, Chitinophagaceae, Caldilineaceae, Mycobacteriaceae, Methylocystaceae, Microbacteriaceae, Cryomorphaceae, and uncultured Class OPB56 were the most enriched. The dynamic bacterial compositions in aerosols were contributed by aerosolization and dispersion. Principal coordinate analysis and clustering analysis showed that the aerosol bacterial community from indoor sludge treatment were closely clustered with that of sludge, indicating that aerosolization dominated the indoor environments. In contrast, aerosols from outdoor wastewater treatment facilities clustered with background ambient aerosols, indicating that outdoor aerosol bacterial communities were mainly governed by dispersion. Aerosolization factor (the ratio of bacteria abundance in aerosols to those in wastewater/sludge) was used to evaluate the aerosolization potential and survival of bacteria. Rhodocyclaceae, Arcobacter, Comamonadaceae, Mycobacterium, and Citrobacter were not only preferentially aerosolized from wastewater/sludge, but also sustainable during dispersion in ambient air.

Highly Stable Zinc-Based Metal-Organic Frameworks and Corresponding Flexible Composites for Removal and Detection of Antibiotics in Water

Antibiotic contamination of water bodies is a major environmental concern. Exposure to superfluous antibiotics is an ecological stressor correlated to the development of antibiotic resistance. Thus, it is imperative that effective methods are developed to simultaneously detect and remove such antibiotics so as to avoid inadvertent release. Herein, two flexible three-dimensional (3D) zinc-based metal-organic frameworks (MOFs) {[Zn₂(bcob)(OH)(H₂O)]·DMA}_n (ROD-Zn1) and {[Zn(Hbcob)]·(solvent)}_n (ROD-Zn2) (H₃bcob = 1,3-bis((4'-carboxylbenzyl)oxy)benzoic acid) with rod second building units (SBUs) are successfully prepared. Their exceptional water and chemical stabilities (toward both acid and base), fast sorption kinetics, and unique framework endow the MOFs with excellent uptake capacity toward various antibiotics in the aqueous environment. The adsorption performance was further optimized by one-pot preparation of MOF-melamine foam (MF) hybrid composites, resulting in a hierarchical microporous-macroporous MOF@MF system (ROD-Zn1@MF and ROD-Zn2@MF), which are readily recyclable after adsorptive capture. The mechanisms of adsorption have been deeply investigated by static and competitive adsorption experiments. In addition, the MOFs exhibit excellent fluorescent properties and quenched by trace amounts of antibiotics in water solution. Therefore, ROD-Zn1 and ROD-Zn2 present a dual-functional performance, being promising candidates for detection and removal of antibiotics.

Quantification and Multidrug Resistance Profiles of Vancomycin-Resistant Enterococci Isolated from Two Wastewater Treatment Plants in the Same Municipality

Wastewater treatment plants (WWTPs) are points of control for the environmental dissemination of antimicrobial resistant bacteria. Vancomycin-resistant enterococci (VRE) were used as indicators of antimicrobial resistance (AMR) in two WWTPs (biologically aerated filter (BAF) and conventional activated sludge (CAS)) in the same municipality. The removal and abundance of enterococci and VRE as well as the species and antimicrobial resistance profiles of VRE were assessed. Enterococci and VRE from the primary and final effluents were enumerated. Results were assessed from an ecological context. VRE was not selected for by either WWTP but the BAF system outperformed the CAS system for the removal of enterococci/VRE. Enterococcus faecalis (n = 151), E. faecium (n = 94) and E. casseliflavus/E. gallinarum (n = 59) were the dominant VRE species isolated. A decrease in levofloxacin resistance in enterococci was observed in the BAF WWTP. An increase in nitrofurantoin resistant (p < 0.001) and a decrease in quinupristin/dalfopristin (p = 0.003) and streptomycin (p = 0.022) resistant enterococci were observed in the CAS WWTP, corresponding to a shift of VRE from E. faecalis to E. faecium. Wastewater treatment processes can be managed to limit the dissemination of antimicrobial resistance determinants into the surrounding environment.

Fate, occurrence and potential adverse effects of antimicrobials used for treatment of tuberculosis in the aquatic environment in South Africa

The consumption of tonnes of anti-tubercular and other anti-microbial compounds for the control of the tuberculosis epidemic and other opportunistic diseases associated with human immunodeficiency virus presents tuberculosis-endemic countries such as South Africa, with a problem regarding the occurrence and fate of these compounds in the aquatic environment. The majority of these compounds are not readily degradable and could persist in the aquatic environment with potential detrimental effect on the aquatic microbiota ecosystem, development and dissemination of anti-microbial resistance as well as chronic toxicity in humans due to long-term exposure. This review summarises and discusses the occurrence, fate and potential adverse effects of the commonly administered anti-tubercular compounds in the aquatic environment in tuberculosis-endemic countries and South Africa in particular. It further attempts to identify information gaps in the literature regarding anti-tubercular compounds in the environment that needs further investigation so that their risk can be comprehensively assessed and impact mitigated.

Insights into the Fate and Removal of Antibiotics in Engineered Biological Treatment Systems: A Critical Review

Antibiotics, the most frequently prescribed drugs of modern medicine, are extensively used for both human and veterinary applications. Antibiotics from different wastewater sources (e.g., municipal, hospitals, animal production, and pharmaceutical industries) ultimately are discharged into wastewater treatment plants. Sorption and biodegradation are the two major removal pathways of antibiotics during biological wastewater treatment processes. This review provides the fundamental insights into sorption mechanisms and biodegradation pathways of different classes of antibiotics with diverse physical-chemical attributes. Important factors affecting sorption and biodegradation behavior of antibiotics are also highlighted. Furthermore, this review also sheds light on the critical role of extracellular polymeric substances on antibiotics adsorption and their removal in engineered biological wastewater treatment systems. Despite major advancements, engineered biological wastewater treatment systems are only moderately effective (48-77%) in the removal of antibiotics. In this review, we systematically summarize the behavior and removal of different antibiotics in various biological treatment systems with discussion on their removal efficiency, removal mechanisms, critical bioreactor operating conditions affecting antibiotics removal, and recent innovative advancements. Besides, relevant background information including antibiotics classification, physical-chemical properties, and their occurrence in the environment from different sources is also briefly covered. This review aims to advance our understanding of the fate of various classes of antibiotics in engineered biological wastewater treatment systems and outlines future research directions.