Roles of extracellular polymeric substances (EPS) in the migration and removal of sulfamethazine in activated sludge system

Molecular spectra and docking simulations investigated the binding mechanisms of tetracycline onto E. coli extracellular polymeric substances

Extracellular polymeric substances (EPS), which were an important fraction of natural organic matter (NOM), played an important role in various environmental processes. However, the heterogeneity, complexity, and dynamics of EPS make their interactions with antibiotics elusive. Using advanced multispectral technology, this study examined how EPS interacts with different concentrations of tetracycline (TC) in the soil system. Our results demonstrated that protein-like (C1), fulvic-like (C2), and humic-like (C3) fractions were identified from EPS. Two-dimensional synchronous correlation spectroscopy (2D-SF-COS) indicated that the protein-like fraction gave faster responses than the fulvic-like fraction during the TC binding process. The sequence of structural changes in EPS due to TC binding was revealed by two-dimensional Fourier Transformation Infrared correlation spectroscopy (2D-FTIR-COS) as follows: 1550 > 1660 > 1395 > 1240 > 1087 cm-1. It is noteworthy that the sensitivity of the amide group to TC has been preserved, with its intensity gradually increasing to become the primary binding site for TC. The integration of hetero-2DCOS maps with moving window 2D correlation spectroscopy (MW2DCOS) provided a unique insight into understanding the correlation between EPS fractions and functional groups during the TC binding process. Moreover, molecular docking (MD) discovered that the extracellular proteins would provide plenty of binding sites with TC through salt bridges, hydrogen bonds, and π-π base-stacking forces. With these results, systematic investigations of the dynamic changes in EPS components under different concentrations of antibiotic exposure demonstrated the advanced capabilities of multispectral technology in examining intricate interactions with EPS in the soil environment.

How denitrifiers defense ciprofloxacin: Insights from intracellular and extracellular stress response

Overuse of antibiotics has led to their existence in nitrogen-containing water. The impacts of antibiotics on bio-denitrification and the metabolic response of denitrifiers to antibiotics are unclear. We systematically analyzed the effect of ciprofloxacin (CIP) on bio-denitrification and found that 5 mg/L CIP greatly inhibited denitrification with a model denitrifier (Paracoccus denitrificans). Nitrate reduction decreased by 32.89 % and nitrous oxide emission increased by 75.53 %. The balance analysis of carbon and nitrogen metabolism during denitrification showed that CIP exposure blocked electron transfer and reduced the flow of substrate metabolism used for denitrification. Proteomics results showed that CIP exposure induced denitrifiers to use the pentose phosphate pathway more for substrate metabolism. This caused a substrate preference to generate NADPH to prevent cellular damage rather than NADH for denitrification. Notably, despite denitrifiers having antioxidant defenses, they could not completely prevent oxidative damage caused by CIP exposure. The effect of CIP exposure on denitrifiers after removal of extracellular polymeric substances (EPS) demonstrated that EPS around denitrifiers formed a barrier against CIP. Fluorescence and infrared spectroscopy revealed that the binding effect of proteins in EPS to CIP prevented damage. This study shows that denitrifiers resist antibiotic stress through different intracellular and extracellular defense strategies.

Remediation of pharmacophoric laboratory waste by using biodegradable carbon nanoparticles of bacterial biofilm origin

Research laboratories generate a broad range of hazardous pharmacophoric chemical contaminants, from drugs to dyes used during various experimental procedures. In the recent past, biological methods have demonstrated great potential in the remediation of such contaminants. However, the presence of pharmacophoric chemicals containing antibiotics, xenobiotics, and heavy metals suppresses the growth and survivability of used microbial agents, thus decreasing the overall efficiency of biological remediation processes. Bacterial biofilm is a natural arrangement to counter some of these inhibitions but its use in a systemic manner, portable devices, and pollutant remediation plants post serious challenges. This could be countered by synthesizing a biodegradable carbon nanoparticle from bacterial biofilm. In this study, extracellular polymeric substance-based carbon nanoparticles (Bio-EPS-CNPs) were synthesized from bacterial biofilm derived from Bacillus subtilis NCIB 3610, as a model bacterial system. The produced Bio-EPS-CNPs were investigated for physiochemical properties by dynamic light scattering, optical, Fourier-transformed infrared, and Raman spectroscopy techniques, whereas X-ray diffraction study, scanning electron microscopy, and transmission electron microscopy were used to investigate structural and morphological features. The Bio-EPS-CNPs exhibited negative surface charge with spherical morphology having a uniform size of sub-100 nm. The maximum remediation of some laboratory-produced pharmacophoric chemicals was achieved through a five-round scavenging process and confirmed by UV/Vis spectroscopic analysis with respect to the used pharmacophore. This bioinspired remediation of used pharmacophoric chemicals was achieved through the mechanism of surface adsorption via hydrogen bonding and electrostatic interactions, as revealed by different characterizations. Further experiments were performed to investigate the effects of pH, temperature, stirring, and the protocol of scavenging to establish Bio-EPS-CNP as a possible alternative to be used in research laboratories for efficient removal of pharmacophoric chemicals by incorporating it in a portable, filter-based device.

Deciphering the role of extracellular polymeric substances in the adsorption and biotransformation of organic micropollutants during anaerobic wastewater treatment

Extracellular polymeric substances (EPS) participate in the removal of organic micropollutants (OMPs), but the primary pathways of removal and detailed mechanisms remain elusive. We evaluated the effect of EPS on removal for 16 distinct chemical classes of OMPs during anaerobic digestion (AD). The results showed that hydrophobic OMPs (HBOMPs) could not be removed by EPS, while hydrophilic OMPs (HLOMPs) were amenable to removal via adsorption and biotransformation of EPS. The adsorption and biotransformation of HLOMPs by EPS accounted up to 19.4 ± 0.9 % and 6.0 ± 0.8 % of total removal, respectively. Further investigations into the adsorption and biotransformation mechanisms of HLOMPs by EPS were conducted utilizing spectral, molecular dynamics simulation, and electrochemical analysis. The results suggested that EPS provided abundant binding sites for the adsorption of HLOMPs. The binding of HLOMPs to tryptophan-like proteins in EPS formed nonfluorescent complexes. Hydrogen bonds, hydrophobic interactions and water bridges were key to the binding processes and helped stabilize the complexes. The biotransformation of HLOMPs by EPS may be attributed to the presence of extracellular redox active components (c-type cytochromes (c-Cyts), c-Cyts-bound flavins). This study enhanced the comprehension for the role of EPS on the OMPs removal in anaerobic wastewater treatment.

Molecular insights into linkages among free-floating macrophyte-derived organic matter, the fate of antibiotic residues, and antibiotic resistance genes

Macrophyte rhizospheric dissolved organic matter (ROM) served as widespread abiotic components in aquatic ecosystems, and its effects on antibiotic residues and antibiotic resistance genes (ARGs) could not be ignored. However, specific influencing mechanisms for ROM on the fate of antibiotic residues and expression of ARGs still remained unclear. Herein, laboratory hydroponic experiments for water lettuce (Pistia stratiotes) were carried out to explore mutual interactions among ROM, sulfamethoxazole (SMX), bacterial community, and ARGs expression. Results showed ROM directly affect SMX concentrations through the binding process, while CO and N-H groups were main binding sites for ROM. Dynamic changes of ROM molecular composition diversified the DOM pool due to microbe-mediated oxidoreduction, with enrichment of heteroatoms (N, S, P) and decreased aromaticity. Microbial community analysis showed SMX pressure significantly stimulated the succession of bacterial structure in both bulk water and rhizospheric biofilms. Furthermore, network analysis further confirmed ROM bio-labile compositions as energy sources and electron shuttles directly influenced microbial structure, thereby facilitating proliferation of antibiotic resistant bacteria (Methylotenera, Sphingobium, Az spirillum) and ARGs (sul1, sul2, intl1). This investigation will provide scientific supports for the control of antibiotic residues and corresponding ARGs in aquatic ecosystems.

Innovation for continuous aerobic granular sludge process in actual municipal sewage treatment: Self-circulating up-flow fluidized bed process

Aerobic granular sludge (AGS) capable of nitrogen and phosphorus removal is mainly limited to the applications in sequencing batch reactors. This study introduced an innovative continuous self-circulating up-flow fluidized bed process (Zier process) using separate aeration. The process was composed of an anoxic column (Zier-A), aeration column (Zier-OO) and aerobic column (Zier-O), and was used to treat actual municipal sewage continuously for 170 days. The process achieved self-circulation of 20-32 times and an up-flow velocity within the reactor of 7-16 m/h which were accurately controlled with only separate aeration. The larger proportion of self-circulating multiple times contributed to particle formation and stability, providing hydraulic shear conditions, and screened the precipitation performance of the granular sludge (GS). Meanwhile, the dissolved oxygen (DO) of Zier-O was controlled at 0.1-0.3 mg/L, and the DO of Zier-A input water was zero. The accurate oxygen supply enhanced simultaneous nitrification and denitrification (SND) as well as short-cut nitrification and denitrification in Zier-O and improved the COD utilization rate and the nitrogen removal rate in Zier-A. The COD treatment capacity reached 2.46 kg-COD/(m³·d). With a hydraulic retention time of 10 h, the process consistently ensured that the average concentrations of ammonia nitrogen and total nitrogen in the effluent were maintained below 5 and 15 mg/L, respectively. Moreover, the process maintained the shape and stability of GS, the median diameter of GS ranged between 300-1210 μm, the percentage of mass with particle size distribution < 200 μm at a height of 150 cm within Zier-A and Zier-O accounted for as low as 0.04%-0.05%, and showed good settling performance. The suspended solids in effluent can be maintained at 50-80 mg/L. Overall, the unique structural setting and control method of the Zier process provide another approach for the application of continuous AGS treatment for municipal sewage.

Molecular insight into the binding properties of marine algogenic dissolved organic matter for polybrominated diphenyl ethers and their combined effect on marine zooplankton

Polybrominated diphenyl ethers (PBDEs) are widespread in marine ecosystems, despite the limits placed on several congeners, and pose a threat to marine organisms. Many coexisting factors, especially dissolved organic matter (DOM), affect the environmental behavior and ecological risk of PBDEs. Since blooms frequently occur in coastal waters, we used algogenic DOM (A-DOM) from the diatom Skeletonem costatum and examined the interaction of A-DOM with 2,2',4,4'-tetrabromodiphenyl ether (BDE-47). Moreover, their combined effect on the rotifer Brachionus plicatilis was analyzed. During the stationary period, A-DOM had more proteins than polysaccharides, and 7 extracellular proteins were identified. A-DOM fluorescence was statically quenched by BDE-47, and amide, carbonyl, and hydroxyl groups in A-DOM were involved. Molecular docking analysis showed that all 5 selected proteins of A-DOM could spontaneously bind with BDE-47 and that hydrophobic interactions, van der Waals forces and pi-bond interactions existed. The reproductive damage, oxidative stress and inhibition of mitochondrial activity induced by BDE-47 in rotifers were relieved by A-DOM addition. Transcriptomic analysis further showed that A-DOM could activate energy metabolic pathways in rotifers and upregulate genes encoding metabolic detoxification proteins and DNA repair. Moreover, A-DOM alleviated the interference effect of BDE-47 on lysosomes, the extracellular matrix pathway and the calcium signaling system. Alcian blue staining and scanning electron microscopy showed that A-DOM aggregates were mainly stuck to the corona and cuticular surface of the rotifers; this mechanism, rather than a real increase in uptake, was the reason for enhanced bioconcentration. This study reveals the complex role of marine A-DOM in PBDEs bioavailability and enhances the knowledge related to risk assessments of PBDE-like contaminants in marine environments.

A novel alginate-embedded magnetic biochar-anoxygenic photosynthetic bacteria composite microspheres for multipollutant removal: Mechanisms of photo-bioelectrochemical enhancement and excellent reusability performance

Existing wastewater treatment technologies face the key challenge of simultaneously removing emerging contaminants and nutrients from wastewater efficiently, with a simplified technological process and minimized operational costs. In this study, a novel alginate-embedded magnetic biochar-anoxygenic photosynthetic bacteria composite microspheres (CA-MBC-PSB microspheres) was prepared for efficient, cost-effective and one-step removal of antibiotics and NH4+-N from wastewater. Our results demonstrated that the CA-MBC-PSB microspheres removed 97.23% of sulfadiazine (SDZ) within 7 h and 91% of NH4+-N within 12 h, which were 21.23% and 38% higher than those achieved by pure calcium alginate-Rhodopseudomonas palustris microspheres (53% and 45.7%), respectively. The enhanced SDZ and NH4+-N removal were attributed to the enhanced photoheterotrophic metabolism and excretion of extracellular photosensitive active substances from R. Palustris through the photo-bioelectrochemical interaction between R. Palustris and magnetic biochar. The long-term pollutants removal performance of the CA-MBC-PSB microspheres was not deteriorated but continuously improved with increasing ruse cycles with a simultaneous removal efficiency of 99% for SDZ and 92% for NH4+-N after three cycles. The excellent stability and reusability were due to the fact that calcium alginate acts as an encapsulating agent preventing the loss and contamination of R. palustris biomass. The CA-MBC-PSB microspheres also exhibited excellent performance for simultaneous removal of SDZ (89% in 7 h) and NH4+-N (90.7% in 12 h) from the secondary effluent of wastewater treatment plant, indicating the stable and efficient performance of CA-MBC-PSB microspheres in practical wastewater treatment.

Photochemical behaviors of sludge extracellular polymeric substances from bio-treated effluents towards antibiotic degradation: Distinguish the main photosensitive active component and its environmental implication

Activated sludge extracellular polymeric substances (ASEPSs) comprise most dissolved organic matters (DOMs) in the tail water. However, the understanding of the link between the photolysis of antibiotic and the photo-reactivity/photo-persistence of ASEPS components is limited. This study first investigated the photochemical behaviors of ASEPS's components (humic acids (HA), hydrophobic substances (HOS) and hydrophilic substances (HIS)) separated from municipal sludge's EPS (M-EPS) and nitrification sludge's EPS (N-EPS) in the photolysis of sulfadiazine (SDZ). The results showed that 60% of SDZ was removed by the M-EPS, but the effect in the separated components was weakened, and only 24% - 39% was degraded. However, 58% of SDZ was cleaned by HOS in N-EPS, which was 23% higher than full N-EPS. M-EPS components had lower steady-state concentrations of triplet intermediates (3EPS*), hydroxyl radicals (·OH) and singlet oxygen (1O2) than M-EPS, but N-EPS components had the highest concentrations (5.96 ×10-15, 8.44 ×10-18, 4.56 ×10-13 M, respectively). The changes of CO, C-O and O-CO groups in HA and HOS potentially correspond to reactive specie's generation. These groups change little in HIS, which may make it have radiation resistance. HCO-3 and NO-3 decreased the indirect photolysis of SDZ, and its by-product N-(2-Pyrimidinyl)1,4-benzenediamine presents high environmental risk.

C4-HSL-mediated quorum sensing regulates nitrogen removal in activated sludge process at Low temperatures

The activated sludge process faces challenges in achieving adequate nitrification ability under low-temperature conditions. Therefore, we investigated the effects of different concentrations of exogenous N-butyryl-homoserine lactone (C4-HSL) on nitrogen removal in lab-scale sequencing batch reactors (SBRs) at 10 °C. The results revealed that both 10 and 100 μg/L of C4-HSL could improve NH4+-N removal efficiency by 26% and reduce the effluent TN concentration to below 15 mg/L. Analysis of extracellular polymeric substances (EPS) revealed that adding C4-HSL (especially 100 μg/L) reduced the protein-like substance content while increasing the humic and fulvic acid-like substance content in EPS. Protein-like substances could serve as carbon sources for denitrifiers, thus promoting denitrification. Moreover, exogenous C4-HSL increased the abundance of bacteria and genes associated with nitrification and denitrification. Further analysis of quorum sensing (QS) of microorganisms indicated that exogenous C4-HSL (especially 100 μg/L) promoted regulation, transportation, and decomposition functions in the QS process. Furthermore, CS, sdh, fum, and mdh gene expressions involved in the tricarboxylic acid (TCA) cycle were enhanced by 100 μg/L C4-HSL. Exogenous C4-HSL promoted microbial communication, microbial energy metabolism, and nitrogen metabolism, thereby improving the nitrogen removal efficiency of activated sludge systems at low temperatures. This study provides a feasible strategy for enhancing denitrogenation performance at low temperatures through exogenous C4-HSL.

Lumen air pressure regulated multifunctional microbiotas in membrane-aerated biofilm reactors for simultaneous nitrogen removal and antibiotic elimination from aquaculture wastewater

In this study, two membrane-aerated biofilm reactors (MABRs) were constructed: one solely utilizing biofilm and another hybrid MABR (HMABR) incorporating both suspended-sludge and biofilm to treat low C/N aquaculture wastewater under varying lumen air pressure (LAP). Both HMABR and MABR demonstrated superior nitrogen removal than conventional aeration reactors. Reducing LAP from 10 kPa to 2 kPa could enhance denitrification processes without severely compromising nitrification, resulting in an increase in total inorganic nitrogen (TIN) removal from 50.2±3.1 % to 71.6±1.0 %. The HMABR exhibited better denitrification efficacy than MABR, underscoring its potential for advanced nitrogen removal applications. A decline in LAP led to decreased extracellular polymeric substance (EPS) production, which could potentially augment reactor performance by minimizing mass transfer resistance while maintaining microbial matrix stability and function. Gene-centric metagenomics analysis revealed decreasing LAP impacted nitrogen metabolic potentials and electron flow pathways. The enrichment of napAB at higher LAP and the presence of complete ammonia oxidation (Comammox) Nitrospira at lower LAP indicated aerobic denitrification and Comammox processes in nitrogen removal. Multifunctional microbial communities developed under LAP regulation, diversifying the mechanisms for simultaneous nitrification-denitrification. Increased denitrifying gene pool (narGHI, nirK, norB) and enzymatic activity at a low LAP can amplify denitrification by promoting denitrifying genes and electron flow towards denitrifying enzymes. Sulfamethoxazole (SMX) was simultaneously removed with efficiency up to 80.2 ± 3.7 %, mainly via biodegradation, while antibiotic resistome and mobilome were propagated. Collectively, these findings could improve our understanding of nitrogen and antibiotic removal mechanisms under LAP regulation, offering valuable insights for the effective design and operation of MABR systems in aquaculture wastewater treatment.

Novel multiplexed alkali enzyme lysis coupled with EDTA pretreatment for RNA virus extraction from wastewater sludge: Optimization, recovery, and detection

RNA viruses are readily enriched in wastewater sludge owing to adsorption by extracellular polymeric substances (EPS) during wastewater treatment, causing pathogenicity. However, conventional wastewater extraction methods often fail to fully extract these viruses from sludge. In this study, three methods: enzymatic (ENP), alkaline (ALP), and ethylenediaminetetraacetic acid (EDTA) pretreatments were applied to sludges and promote the RNA virus extraction from sludge. Our results show that the total recovery rate of RNA viruses increased by 87.73% after ENP pretreatment, whereas ALP pretreatment inhibited virus extraction. The highest recovery rate of viruses from sludge, reaching 296.80%, was achieved with EDTA pretreatment (EDP) coupled with ENP. Notably, the most significant increase was observed in the abundance of Astroviruses, which increased from 7.60 × 107 to 7.86 × 108 copies/g TSS after EDP + ENP treatment. Our investigations revealed that virus extraction was affected by a class of short-wavelength protein substances, as opposed to tryptophan or tyrosine, which were eluted by proteins with beef paste buffer by substitution after EDP + ENP treatment. The results of this study provide essential insights for sludge-based epidemiology with the required sensitivity for managing the extraction of RNA epidemic viruses to control viral transmission.

Abatement of antibiotics and resistance genes during catalytic ozonation enhanced sludge dewatering process: Synchronized in volume and hazardousness reduction

Based on the efficiency of the catalytic ozonation techniques (HDWS+O3 and MnFe2O4 @SBC+O3) in enhancing the sludge dewaterability, the effectiveness in synchronized abatement antibiotics and antibiotic resistance genes (ARGs) was conducted to determine. The results revealed that catalytic ozonation conditioning altered the distribution of target antibiotics (tetracycline (TC), oxytetracycline (OTC), norfloxacin (NOR), ofloxacin (OFL)) in the dewatered filtrate, the dewatered sludge cake and the extra-microcolony/cellular polymers (EMPS/ECPS) layers, achieving the redistribution from solid-phase adsorption to liquid-phase dissolution. The total degradation rate was over 90% for TC and OTC, 72-78% for NOR and OFL; the abatement efficiency of eleven ARGs reached 1.47-3.01 log and 1.64-3.59 log, respectively, and more than four eARGs were eliminated. The effective abatement of the absolute abundance of Mobile genetic elements (MGEs) (0.91-1.89 log) demonstrated that catalytic ozonation conditioning could also significantly inhibit horizontal gene transfer (HGT). The abundance of resistant bacteria was greatly reduced and the signal transduction of the typical ARGs host bacteria was inhibited. The highly reactive oxidation species (ROS) generated were responsible for the abatement of antibiotics and ARGs. These findings provided new insights into the sludge conditioning for ideal and synchronized reduction in volume and hazardousness by catalytic ozonation processes in sludge treatment.

Deciphering DOM-metal binding using EEM-PARAFAC: Mechanisms, challenges, and perspectives

Dissolved organic matter (DOM) is a pivotal component of the biogeochemical cycles and can combine with metal ions through chelation or complexation. Understanding this process is crucial for tracing metal solubility, mobility, and bioavailability. Fluorescence excitation emission matrix (EEM) and parallel factor analysis (PARAFAC) has emerged as a popular tool in deciphering DOM-metal interactions. In this review, we primarily discuss the advantages of EEM-PARAFAC compared with other algorithms and its main limitations in studying DOM-metal binding, including restrictions in spectral considerations, mathematical assumptions, and experimental procedures, as well as how to overcome these constraints and shortcomings. We summarize the principles of EEM to uncover DOM-metal association, including why fluorescence gets quenched and some potential mechanisms that affect the accuracy of fluorescence quenching. Lastly, we review some significant and innovative research, including the application of 2D-COS in DOM-metal binding analysis, hoping to provide a fresh perspective for possible future hotspots of study. We argue the expansion of EEM applications to a broader range of areas related to natural organic matter. This extension would facilitate our exploration of the mobility and fate of metals in the environment.

The structural transformation reversibility of biogas slurry derived dissolved organic matter and its binding properties with norfloxacin under temperature fluctuation

The widespread use of biogas slurry could potentially raise the environmental risk of antibiotics. Dissolved organic matter (DOM), as the most active part of biogas slurry, was able to interact with antibiotics and play a crucial role in the structure and function of soil and aquatic ecosystems. The recent shifts in global climate patterns have garnered significant attention due to their substantial impact on temperature, thereby exerting a direct influence on the characteristics of DOM and subsequently on the environmental behavior of antibiotics. However, there is limited research concerning the impact of temperature on the binding of DOM and antibiotics. Thus, this study aimed to explore the temperature-dependent structural transformation and driving factors of biogas slurry-derived DOM (BSDOM). Additionally, the binding characteristics between BSDOM and the commonly used antibiotic norfloxacin (NOR) at different temperatures were studied by using multi spectroscopic methods and two-dimensional correlation spectroscopy (2D-COS) analysis. The results suggested that the temperature-dependent structural transformation of BSDOM was reversible, with a slight lag in the transition temperature under cooling (13 °C for heating and 17 °C for cooling). Heating promoted the conversion of protein-like to humic-like substances while cooling favored the decomposition of humic-like substances. BSDOM and NOR were static quenching, with oxygen-containing functional groups such as C-O and -OH playing an important role. Temperature influenced the order of binding, the activity of the protein fraction, and its associated functional groups. At temperatures of 25 °C and 40 °C, the fluorescent components were observed to exhibit consistent binding preferences, whereby the humic-like component demonstrated a greater affinity for NOR compared to the protein-like component. However, the functional group binding order exhibited an opposite trend. At 10 °C, a new protein-like component appeared and bound preferentially to NOR, when no C-O stretch corresponding to the amide was observed. The finding will contribute to a comprehensive understanding of the interaction mechanisms between DOM and antibiotics under climate change, as well as providing a theoretical basis to reduce the environmental risks of biogas slurry and antibiotics.

Promising bioprocesses for the efficient removal of antibiotics and antibiotic-resistance genes from urban and hospital wastewaters: Potentialities of aerobic granular systems

The use, overuse, and improper use of antibiotics have resulted in higher levels of antibiotic-resistant bacteria (ARB) and antibiotic-resistance genes (ARGs), which have profoundly disturbed the equilibrium of the environment. Furthermore, once antibiotic agents are excreted in urine and feces, these substances often can reach wastewater treatment plants (WWTPs), in which improper treatments have been highlighted as the main reason for stronger dissemination of antibiotics, ARB, and ARGs to the receiving bodies. Hence, achieving better antibiotic removal capacities in WWTPs is proposed as an adequate approach to limit the spread of antibiotics, ARB, and ARGs into the environment. In this review, we highlight hospital wastewater (WW) as a critical hotspot for the dissemination of antibiotic resistance due to its high level of antibiotics and pathogens. Hence, monitoring the composition and structure of the bacterial communities related to hospital WW is a key factor in controlling the spread of ARGs. In addition, we discuss the advantages and drawbacks of the current biological WW treatments regarding the antibiotic-resistance phenomenon. Widely used conventional activated sludge technology has proved to be ineffective in mitigating the dissemination of ARB and ARGs to the environment. However, aerobic granular sludge (AGS) technology is a promising technology-with broad adaptability and excellent performance-that could successfully reduce antibiotics, ARB, and ARGs in the generated effluents. We also outline the main operational parameters involved in mitigating antibiotics, ARB, and ARGs in WWTPs. In this regard, WW operation under long hydraulic and solid retention times allows better removal of antibiotics, ARB, and ARGs independently of the WW technology employed. Finally, we address the current knowledge of the adsorption and degradation of antibiotics and their importance in removing ARB and ARGs. Notably, AGS can enhance the removal of antibiotics, ARB, and ARGs due to the complex microbial metabolism within the granular biomass.

Field migration of veterinary antibiotics via surface runoff from chicken-raising orchard in responding to natural rainfalls

Knowledge on runoff transport of manure-sourced antibiotics from farmland soil to aquatic environment is limited due to complexity of hydrological regime and pathways. This study monitored natural rainfalls in sloping orchard plots with free-range chickens, with an attempt to investigate the migration characteristics of typical antibiotics via surface runoff as well as the impact of manure presence. Results showed that rainstorms continuously carried away antibiotics in surface runoff and all target antibiotics including those with high affinities to soil were detected at the beginning of runoff production. Concentration of antibiotics was found to respond strongly to the instantaneous rainfall intensity, showing consistent fluctuations during rainfalls. Concentrations of sulfonamides and florfenicol were two orders of magnitude higher than that of tetracyclines and fluoroquinolones. Compared to the control without raising chickens, antibiotics migration was considerably increased with the increased runoff production due to soil surface changes caused by chicken activities. Additionally, dynamics of antibiotic concentration significantly correlated with variations of fluorescent DOM components. Chicken manure-derived DOM mainly contained tryptophan moiety, and laboratory fluorescence quenching test with 2D-COS analysis indicated that all antibiotics interacted more strongly and preferentially with tryptophan than humic-like species. Antibiotics bonded to manure DOM with an affinity corresponding to the significance level of their correlations. In this light, potential use of fluorescence indices based on the established correlations may provide a convenient tool for tracing runoff migration of antibiotics during rainfalls.

Characteristics of microplastic-derived dissolved organic matter and its binding with pharmaceuticals unveiled by fluorescence spectroscopy and two-dimensional correlation spectroscopy

Microplastics were an extensively detected pollutant in the environment, but microplastic-derived dissolved organic matter (MP-DOM) has received less attention, much less its impact on the binding behavior of pollutants (e.g., pharmaceuticals). In this study, DOM derived from two typical MPs, i.e., polyethylene terephthalate (PET) and polystyrene (PS) was generated by UV irradiation (a widely used way for MPs' aging treatment) and characterized by multiple spectroscopic techniques and methods. Chloramphenicol (CAP) and carbamazepine (CBZ) were selected to investigate the binding mechanism between MP-DOM and pharmaceuticals. After UV irradiation, the concentration of the dissolved organic carbon, colored DOM, and carboxyl/carbonyl groups of MP-DOM increased. Moreover, the humic-like substance released preceding and more under UV irradiation. Furthermore, the protein-like substances on PET-DOM and the humic-like substances on PS-DOM were positively correlated to the binding capacity to the pharmaceuticals, respectively. 2D-COS results revealed that the fluorescent materials having more oxygen-containing functional groups for MP-DOM preferentially interacted with the pharmaceuticals. Overall, the higher fluorescence quenching was related to the protein-like substance, CBZ, and PET-DOM as compared to the humic-like substance, CAP, and PS-DOM. It was verified by the relatively high binding ability (logKM) for them (the protein-like substance: 5.15; CBZ: 4.61; PET: 4.48). This study first proved the environmental reactivity of MP-DOM to the pharmaceuticals highlighting the significance of the spectral properties for the binding behavior of MP-DOM with pharmaceuticals and the competitive sorption role of MP-DOM to the pollutants in the natural environment.

Roles of extracellular polymeric substances in the adsorption and removal of norfloxacin during hydrothermal treatment of sewage sludge

Hydrothermal treatment (HT) is promising to remove antimicrobials from sewage sludge (SS); however, the mechanism of antimicrobial degradation during the HT of SS is not fully understood. In this study, the roles of extracellular polymeric substances (EPS) in the removal and transformation of norfloxacin (NOR) during the HT of SS at temperatures of 100 and 160 °C were investigated. The results indicated that the degradation of NOR increased with increasing HT temperature, with maximum NOR removal (52%) achieved at 160 °C. Furthermore, the NOR in sludge showed higher degradation efficiencies than the control as HT temperature was higher than 120 °C. Evident promotion effects of bound-EPS (B-EPS) in sludge were observed on the NOR degradation as HT temperature was higher than 120 °C, leading to the mineralization and deamination of protein-like components in EPS during HT. Beside, the adsorption capacity of NOR during the HT of SS decreased at temperatures higher than 120 °C. The evolution of the spatial structure of B-EPS was predominantly responsible for the adsorption of antimicrobials, a spontaneous process driven mainly by hydrophilic interactions. With the hydrothermal conversion of B-EPS, the electron transfer, and reactive species (3EPS* and ·OH) derived from B-EPS could facilitate the degradation of NOR. In particular, hydrogen bonds between B-EPS and NOR increased the apparent yield of ·OH and accelerated the decarboxylation of NOR during HT at temperatures higher than 120 °C. A toxicity evaluation suggested that HT for NOR degradation could attenuate toxicity, whereas deep oxidation or mineralization would be needed to promote ecosystem safety. These findings provide new insights into the hydrothermal activation of EPS and the interrelated hydrothermal fate of antimicrobials and other toxic pollutants in sludge.

Optimizing ciprofloxacin removal through regulations of trophic modes and FNA levels in a moving bed biofilm reactor performing sidestream partial nitritation

The performance of partial nitritation (PN)-moving bed biofilm reactor (MBBR) in removal of antibiotics in the sidestream wastewater has not been investigated so far. In this work, the removal of ciprofloxacin was assessed under varying free nitrous acid (FNA) levels and different trophic modes. For the first time, a positive correlation was observed between ciprofloxacin removal and FNA levels, either in the autotrophic PN-MBBR or in the mixotrophic PN-MBBR, mainly ascribed to the FNA-stimulating effect on heterotrophic bacteria (HB)-induced biodegradation. The maximum ciprofloxacin removal efficiency (∼98 %) and removal rate constant (0.021 L g-1 SS h-1) were obtained in the mixotrophic PN-MBBR at an average FNA level of 0.056 mg-N L-1, which were 5.8 and 51.2 times higher than the corresponding values in the autotrophic PN-MBBR at 0 mg FNA-N L-1. Increasing FNA from 0.006 to 0.056 mg-N L-1 would inhibit ammonia oxidizing bacteria (AOB)-induced cometabolism and metabolism from 10.2 % and 6.9 % to 6.2 % and 6.4 %, respectively, while HB-induced cometabolism and metabolism increased from 31.2 % and 22.7 % to 41.9 % and 34.5 %, respectively. HB-induced cometabolism became the predominant biodegradation pathway (75.9 %-85.8 %) in the mixotrophic mode. Less antimicrobial biotransformation products without the piperazine or fluorine were newly identified to propose potential degradation pathways, corresponding to microbial-induced metabolic types and FNA levels. This work shed light on enhancing antibiotic removal via regulating both FNA accumulation and organic carbon addition in the PN-MBBR process treating sidestream wastewater.

Responses of syntrophic microbial communities and their interactions with polystyrene nanoplastics in a microbial electrolysis cell

Microbial electrochemical technologies are promising for simultaneous energy recovery and wastewater treatment. Although the inhibitory effects of emerging pollutants, particularly micro/nanoplastics (MPs/NPs), on conventional wastewater systems have been extensively studied, the current understanding of their impact on microbial electrochemical systems is still quite limited. Microplastics are plastic particles ranging from 1 μm to 5 mm. However, nanoplastics are smaller plastic particles ranging from 1 to 100 nm. Due to their smaller size and greater surface area, they can penetrate deeper into biofilm structures and cell membranes, potentially disrupting their integrity and leading to changes in biofilm composition and function. This study first reports the impact of polystyrene nanoplastics (PsNPs) on syntrophic anode microbial communities in a microbial electrolysis cell. Low concentrations of PsNPs (50 and 250 μg/L) had a minimal impact on current density and hydrogen production. However, 500 μg/L of PsNPs decreased the maximum current density and specific hydrogen production rate by ∼43 % and ∼48 %, respectively. Exposure to PsNPs increased extracellular polymeric substance (EPS) levels, with a higher ratio of carbohydrates to proteins, suggesting a potential defense mechanism through EPS secretion. The downregulation of genes associated with extracellular electron transfer was observed at 500 μg/L of PsNPs. Furthermore, the detrimental impact of 500 μg/L PsNPs on the microbiome was evident from the decrease in 16S rRNA gene copies, microbial diversity, richness, and relative abundances of key electroactive and fermentative bacteria. For the first time, this study presents the inhibitory threshold of any NPs on syntrophic electroactive biofilms within a microbial electrochemical system.

Ecotoxicity of a mixture of nanoparticles on algal species Scendesmus obliquus in OECD growth media, wastewater, and pond water

The possible impact of ZnO and CuO nanoparticles (NPs) (individually and in binary mixture) was investigated using the freshwater microalgae, Scenedesmus obliquus. The present study shows the effect of nanoparticles on algae in OECD growth media, wastewater, and pond water during a 96-h toxicity test. At 0.1 mg/L concentration of the mixture of NPs, the reduction in the chlorophyll a content was 13.61 ± 1.34% (OECD media), 28.83 ± 1.85% (wastewater), and 31.81 ± 2.23% (pond water). Values of reduction in biomass were observed to be 42.13 ± 1.38, 39.96 ± 1.03, and 33.10 ± 1.29% for OECD media, wastewater, and pond water, respectively. The highest increase in lipid values was observed in the case of pond water (6.3 ± 1.31%). A significant increase in the value of EPS-generated protein was observed in the wastewater sample. EPS-generated carbohydrate values were increased in OECD media but decreased in the wastewater matrix. The transmission electron microscope images showed structural damage to algae cells due to the exposure to a mixture of nanoparticles at higher concentrations. Fourier transform infrared analysis showed an addition of bonds and differences in the peak and its intensity during exposure to high concentrations of NPs. Overall, this study gives fundamental insights into the interaction and toxicity of a mixture of NPs to algal species in different water matrices.

Towards the fate of antibiotics and the development of related resistance genes in stream biofilms

Antibiotics are ubiquitously found in natural surface waters and cause great harm to aquatic organisms. Stream biofilm is a complex and active community composed of algae, bacteria, fungi and other microorganisms, which mainly adheres to solid substances such as rocks and sediments. The durability and diverse structural and metabolic characteristics of biofilms make them a representative of microbial life in aquatic micrecosystems and can reflect major ecosystem processes. Microorganisms and extracellular polymeric substances in biofilms can adsorb and actively accumulate antibiotics. Therefore, biofilms are excellent biological indicators for detecting antibiotic in polluted aquatic environments, but the biotransformation potential of stream biofilms for antibiotics has not been fully explored in the aquatic environment. The characteristics of stream biofilm, such as high abundance and activity of bacterial community, wide contact area with pollutants, etc., which increases the opportunity of biotransformation of antibiotics in biofilm and contribute to bioremediation to improve ecosystem health. Recent studies have demonstrated that both exposure to high and sub-minimum inhibitory concentrations of antibiotics may drive the development of antibiotic resistance genes (ARGs) in natural stream biofilms, which are susceptible to the effects of antibiotic residues, microbial communities and mobile genetic elements, etc. On the basis of peer-reviewed papers, this review explores the distribution behavior of antibiotics in stream biofilms and the contribution of biofilms to the acquisition and spread of antibiotic resistance. Considering that antibiotics and ARGs alter the structure and ecological functions of natural microbial communities and pose a threat to river organisms and human health, our research findings provide comprehensive insights into the migration, transformation, and bioavailability of antibiotics in biofilms.

The fates of antibiotic resistance genes and their association with cell membrane permeability in response to peroxydisulfate during composting

The aims of this study were to use metagenomics to reveal the fates of antibiotic resistance genes (ARGs) during composting under the regulation of peroxydisulfate and clarify the relationship between ARGs and cell membrane permeability. Results showed that peroxydisulfate increased cell membrane permeability by effectively regulating the expression of outer membrane protein and lipopolysaccharide related genes. Besides, it reduced polysaccharides and proteins in extracellular polymer substances by 36% and 58%, respectively, making it easier for intracellular ARGs (i-ARGs) to reach the extracellular environment, among which the absolute intracellular abundance of mphK, Erm(31), and tet(44) decreased to 1.2, 1.0, and 0.89 fold of the control, respectively. Finally, variation partitioning analysis showed that i-ARGs dominated the removal of ARGs. These results revealed that the removal of i-ARGs by activated peroxydisulfate was the key to the removal of ARGs and increased cell membrane permeability played a key role for peroxydisulfate to remove i-ARGs during composting.

Interaction between microplastic biofilm formation and antibiotics: Effect of microplastic biofilm and its driving mechanisms on antibiotic resistance gene

As two pollutants with similar transport pathways, microplastics (MPs) and antibiotics (ATs) inevitably co-exist in water environments, and their interaction has become a topic of intense research interest for scholars over the past few years. This paper comprehensively and systematically reviews the current interaction between MPs and ATs, in particular, the role played by biofilm developed MPs (microplastic biofilm). A summary of the formation process of microplastic biofilm and its unique microbial community structure is presented in the paper. The formation of microplastic biofilm can enhance the adsorption mechanisms of ATs on primary MPs. Moreover, microplastic biofilm system is a diverse and vast reservoir of genetic material, and this paper reviews the mechanisms by which microplastics with biofilm drive the production of antibiotic resistance genes (ARGs) and the processes that selectively enrich for more ARGs. Meanwhile, the enrichment of ARGs may lead to the development of microbial resistance and the gradual loss of the antimicrobial effect of ATs. The transfer pathways of ARGs affected by microplastic biofilm are outlined, and ARGs dependent transfer of antibiotic resistance bacteria (ARB) is mainly through horizontal gene transfer (HGT). Furthermore, the ecological implications of the interaction between microplastic biofilm and ATs and perspectives for future research are reviewed. This review contributes to a new insight into the aquatic ecological environmental risks and the fate of contaminants (MPs, ATs), and is of great significance for controlling the combined pollution of these two pollutants.

Microplastic biofilm: An important microniche that may accelerate the spread of antibiotic resistance genes via natural transformation

Microplastic (MP) biofilms provide a specific microniche for microbial life and are a potential hotspot for the horizontal gene transfer (HGT) of antibiotic resistance genes (ARGs). Nevertheless, the acquisition of ARGs in MP biofilms via natural transformation mediated by extracellular DNA (eDNA) has been rarely explored. This study demonstrated that MP biofilms promoted the natural transformation of extracellular ARGs at the single-cell and multi-species levels, compared to natural substrate (NS) biofilms and bacterioplankton. The transformation frequency on MP biofilms was up to 1000-fold compare to that on NS. The small MPs and aged MPs enhanced the ARG transformation frequencies up to 77.16-fold and 32.05-fold, respectively, compared with the large MPs and pristine MPs. The transformation frequencies on MP biofilms were significantly positively correlated with the bacterial density and extracellular polymeric substance (EPS) content (P < 0.05). Furthermore, MPs significantly increased the expression of the biofilm formation related genes (motA and pgaA) and DNA uptake related genes (pilX and comA) compared to NS and bacterioplankton. The more transformants colonized on MPs contributed to the enhanced transformation frequencies at the community-wide level. Overall, eDNA-mediated transformation in MP biofilms may be an important path of ARG spread, which was promoted by heterogeneous biofilm.

Bisphenols-A Threat to the Natural Environment

Negative public sentiment built up around bisphenol A (BPA) follows growing awareness of the frequency of this chemical compound in the environment. The increase in air, water, and soil contamination by BPA has also generated the need to replace it with less toxic analogs, such as Bisphenol F (BPF) and Bisphenol S (BPS). However, due to the structural similarity of BPF and BPS to BPA, questions arise about the safety of their usage. The toxicity of BPA, BPF, and BPS towards humans and animals has been fairly well understood. The biodegradability potential of microorganisms towards each of these bisphenols is also widely recognized. However, the scale of their inhibitory pressure on soil microbiomes and soil enzyme activity has not been estimated. These parameters are extremely important in determining soil health, which in turn also influences plant growth and development. Therefore, in this manuscript, knowledge has been expanded and systematized regarding the differences in toxicity between BPA and its two analogs. In the context of the synthetic characterization of the effects of bisphenol permeation into the environment, the toxic impact of BPA, BPF, and BPS on the microbiological and biochemical parameters of soils was traced. The response of cultivated plants to their influence was also analyzed.

Deciphering the distribution and microbial secretors of extracellular polymeric substances associated antibiotic resistance genes in tube wall biofilm

Antibiotics and disinfectants have both been proposed to exert selective pressures on the biofilm as well as affecting the emergence and spread of antibiotic resistance genes (ARGs). However, the transfer mechanism of ARGs in drinking water distribution system (DWDS) under the coupling effect of antibiotics and disinfectants has not been completely understood. In the current study, four lab-scale biological annular reactors (BARs) were constructed to evaluate the effects of sulfamethoxazole (SMX) and NaClO coupling in DWDS and reveal the related mechanisms of ARGs proliferation. TetM was abundant in both the liquid phase and the biofilm, and redundancy analysis showed that the total organic carbon (TOC) and temperature were significantly correlated with ARGs in the water phase. There was a significant correlation between the relative abundance of ARGs in the biofilm phase and extracellular polymeric substances (EPS). Additionally, the proliferation and spread of ARGs in water phase were related to microbial community structure. Partial least-squares path modeling showed that antibiotic concentration may influence ARGs by affecting MGEs. These findings help us to better understand the diffusion process of ARGs in drinking water and provide a theoretical support for technologies to control ARGs at the front of pipeline.

Functional fungal pellets self-immobilized by mycelium fragments of Irpex lacteus WRF-IL for efficient degradation of sulfamethazine as the sole carbon source

In order to achieve an efficient microbial material with dual functions of self-immobilization and sulfamethazine (SMZ) degradation, this study explored the pelletization technique utilizing mycelium fragments of Irpex lacteus WRF-IL and systematically examined the pellets formation conditions and degradation capability. The Box-Behnken design results demonstrated that pure mycelium fragments, broken by frosted glass beads, could be rapidly self-immobilized to form white rot mycelial pellets (WRMPs) within 24 h, serving as the pelleting core. These WRMPs could completely remove SMZ as the sole carbon source within 20 h. The addition of sucrose expedited this process, achieving complete removal within only 14 h. Kinetic analysis showed that WRMPs could potentially remove SMZ at higher concentrations (>25 mg/L). Biodegradation was the primary pathway of SMZ removal. Seven intermediates were identified by QTOF LC/MS, and three transformation pathways initiated by SO₂ overflow, molecular rearrangement, and aniline moiety oxidation were deduced.

Unraveling the intracellular and extracellular self-defense of Chlorella sorokiniana toward highly toxic pyridine stress

A bottleneck of microalgae-based techniques for wastewater bioremediation is activity inhibition of microalgae by toxic pollutants. The defense strategies of Chlorella sorokinana against toxic pyridine were studied. Results indicated that pyridine caused photoinhibition and reactive oxygen species overproduction in a concentration-dependent manner. The 50% inhibitory concentration of pyridine (147 mg L^-1) destroyed C/N balance, disrupted multiple metabolic pathways of C. sorokinana. In response to pyridine stress, ascorbate peroxidase and catalase activities increased to scavenge reactive oxygen species under pyridine concentrations lower than 23 mg L^-1. At higher pyridine concentrations, the activation of calcium signaling pathways and phytohormones represented the predominant defense response. Extracellular polymeric substances increased 3.6-fold in 147 mg L^-1 group than control, which interacted with pyridine through hydrophobic and aromatic stacking to resist pyridine entering algal cells. Unraveling the intracellular and extracellular self-defense mechanisms of microalgae against pyridine stress facilitates the development of microalgal-based technology in wastewater bioremediation.

Understanding the cometabolic degradation of sulfadiazine by an enriched ammonia oxidizing bacteria culture from both extracellular and intracellular perspectives

Antibiotics are widely used drugs in the world and pose serious threats to ecosystems and human health. Although it has been reported that ammonia oxidizing bacteria (AOB) can cometabolize antibiotics, little has been reported on how AOB would respond to the exposure of antibiotics on extracellular and enzymatic levels, as well as the impact of antibiotics on the bioactivity of AOB. Therefore, in this study, a typical antibiotic, sulfadiazine (SDZ), was selected, and a series short-term batch tests using enriched AOB sludge were conducted to investigate the intracellular and extracellular responses of AOB along the cometabolic degradation process of SDZ. The results showed the cometabolic degradation of AOB made the main contribution to SDZ removal. When the enriched AOB sludge was exposed to SDZ, ammonium oxidation rate, ammonia monooxygenase activity, adenosine triphosphate concentration and dehydrogenases activity were negatively affected. The amoA gene abundance increased 1.5 folds within 24 h, which may enhance the uptake and utilization of substrates and maintain stable metabolic activity. In the tests with and without ammonium, the concentration of total EPS increased from 264.9 to 231.1 mg/gVSS to 607.7 and 538.2 mg/gVSS, respectively, under the exposure to SDZ, which was mainly contributed by the increase of proteins in tightly bound extracellular polymeric substances (EPS) and polysacharides in tightly bound EPS and soluble microbial products. The proportion of tryptophan-like protein and humic acid-like organics in EPS also increased. Moreover, SDZ stress stimulated the secretion of three quorum sensing signal molecules, C4-HSL (from 140.3 to 164.9 ng/L), 3OC6-HSL (from 17.8 to 42.4 ng/L) and C8-HSL (from 35.8 to 95.9 ng/L) in the enriched AOB sludge. Among them, C8-HSL may be a key signal molecule that promoted the secretion of EPS. The findings of this study could shed more light on the cometabolic degradation of antibiotics by AOB.

Risk control of antibiotics, antibiotic resistance genes (ARGs) and antibiotic resistant bacteria (ARB) during sewage sludge treatment and disposal: A review

Sewage sludge is an important reservoir of antibiotics, antibiotic resistance genes (ARGs), and antibiotic resistant bacteria (ARB) in wastewater treatment plants (WWTPs), and the reclamation of sewage sludge potentially threats human health and environmental safety. Sludge treatment and disposal are expected to control these risks, and this review summarizes the fate and controlling efficiency of antibiotics, ARGs, and ARB in sludge involved in different processes, i.e., disintegration, anaerobic digestion, aerobic composting, drying, pyrolysis, constructed wetland, and land application. Additionally, the analysis and characterization methods of antibiotics, ARGs, and ARB in complicate sludge are reviewed, and the quantitative risk assessment approaches involved in land application are comprehensively discussed. This review benefits process optimization of sludge treatment and disposal, with regard to environmental risks control of antibiotics, ARGs, and ARB in sludge. Furthermore, current research limitations and gaps, e.g., the antibiotic resistance risk assessment in sludge-amended soil, are proposed to advance the future studies.

The contradictory roles of tightly bound and loosely bound extracellular polymeric substances of activated sludge in trimethoprim adsorption process

Extracellular polymeric substances (EPS) of activated sludge are a mixture of high molecular weight polymers secreted by microorganisms, which have the double structure of tightly-bound EPS (TB-EPS) in inner layer and loosely-bound EPS (LB-EPS) in outer layer. The characteristic of LB- and TB-EPS were different, which would affect their adsorption of antibiotics. However, the adsorption process of antibiotics on LB- and TB-EPS was still unclear yet. Therefore, in this work, the roles of LB-EPS and TB-EPS in adsorption of a typical antibiotic-trimethoprim (TMP) at environmentally relevant concentration (25.0 μg/L) were investigated. The results showed the content of TB-EPS was higher than that of LB-EPS, which was 17.08 and 10.36 mg/g VSS, respectively. The adsorption capacity of raw, LB-EPS extracted and both LB- and TB-EPS extracted activated sludges for TMP were 5.31, 4.65 and 9.51 μg/g VSS, respectively, which indicated LB-EPS had positive effect on TMP removal, while TB-EPS had negative effect. The adsorption process can be well described by a pseudo-second-order kinetic model (R² > 0.980). The ratio of different functional groups was calculated and the CO and C-O bond might be responsible for the adsorption capacity difference between LB- and TB-EPS. The fluorescence quenching results indicated that tryptophan protein-like substances in LB-EPS provided more binding sites (n = 0.36) than that of tryptophan amino acid in TB-EPS (n = 0.1). Furthermore, the extend DLVO results also demonstrated that LB-EPS promoted the adsorption of TMP, while TB-EPS inhibited the process. We hope the results of this study were helpful for understanding the fate of antibiotics in wastewater treatment systems.

Biosorption and biotransformation behaviours of veterinary antibiotics under aerobic livestock wastewater treatment processes

To study the fate of veterinary antibiotics released from swine wastewater treatment plants (SWTP), 10 antibiotics were investigated in each unit of a local SWTP periodically. Over a 14-month period of field investigation into target antibiotics, it was confirmed that tetracycline, chlortetracycline, sulfathiazole, and lincomycin were used in this SWTP, with their presence observed in raw manure. Most of these antibiotics could be effectively treated by aerobic activated sludge, except for lincomycin, which was still detected in the effluent, with a maximum concentration of 1506 μg/L. In addition, the potential for removing antibiotics was evaluated using lab-scale aerobic sequencing batch reactors (SBRs) that were dosed with high concentrations of antibiotics. The SBR results, however, showed that both sulfonamides and macrolides, as well as lincomycin, can achieve 100% removal in lab-scale aerobic SBRs within 7 days. This reveals that the potential removal of those antibiotics in field aeration tanks can be facilitated by providing suitable conditions, such as adequate dissolved oxygen, pH, and retention time. Furthermore, the biosorption of target antibiotics was also confirmed in the abiotic sorption batch tests. Biotransformation and hydrolysis were identified as the dominant mechanism for removing negatively charged sulfonamides and positively charged antibiotics (macrolides and lincomycin) in SBRs. This is due to their relatively low sorption affinity (resulting in negligible to 20% removal) onto activated sludge in abiotic sorption tests. On the other hand, tetracyclines exhibited significant sorption behavior both onto activated sludge and onto soluble organic matters in swine wastewater supernatant, accounting for 70%-91% and 21%-94% of removal within 24 h, respectively. S-shape sorption isotherms with saturation were observed when high amounts of tetracyclines were spiked into sludge, with equilibrium concentrations ranging from 0.4 to 65 mg/L. Therefore, the sorption of tetracyclines onto activated sludge was governed by electrostatic interaction rather than hydrophobic partition. This resulted in a saturated sorption capacity (Q_max) of 17,263 mg/g, 1637 mg/g, and 641.7 mg/g for OTC, TC, and CTC, respectively.

Bacterial extracellular polymeric substances: Biosynthesis and interaction with environmental pollutants

Extracellular polymeric substances (EPS) are highly hydrated matrices produced by bacteria, containing various polymers such as polysaccharides, proteins, lipids, and DNA. Extracellular polymer concentrations, ions, and functional groups provide physical stability to the EPS. Constituents of EPS form the three-dimensional architecture and help acquire nutrition for the bacteria. Structural and functional diversity of the extracellular polymer depends on the specific glycosyltransferases, polymerase and transporter proteins. These enzymes are encoded by specific genes present in operons such as crd, alg, wca, and gum reported in Agrobacterium, Pseudomonas, Enterobacteriaceae, and Xanthomonas. The operons regulate the biosynthesis of extracellular polymers such as curdlan, alginate, colonic acid, and xanthan, respectively. Various functional groups in the EPS, such as carbonyl, hydroxyl, phosphoryl, and amide, provide the sorption site for interaction with environmental pollutants. Hydrophobic interactions and coordinate bonds mainly dominate the binding of EPS with environmental pollutants. EPS binds, emulsifies, and solubilizes the organic compounds, enhancing the degradation process. EPS binds with heavy metals through complexation, surface adsorption, precipitation, and ion exchange mechanisms. The biodegradability efficiency and nontoxicity properties of EPS make it an excellent biopolymer for decontaminating environmental pollutants. This review summarizes an overview of the biosynthetic mechanisms and interaction of the bacterial extracellular polymer with environmental pollutants. Interaction mechanisms of pollutants with EPS and EPS-mediated bioremediation will help develop removal applications. Moreover, understanding the genes responsible for EPS production, and implementation of new genetic methodology can be helpful for the enhanced biosynthesis of EPS to control pollution by sequestrating more environmental pollutants.

Antibiotic resistance genes proliferation under anaerobic degradation of polylactic acid and polyhydroxy butyrate bioplastics

As the global concern over plastic pollution grows, efforts are underway to find environmentally friendly alternatives to traditional plastics. Bioplastics are being extensively researched and developed as a possible solution. This study compared the impact of two bioplastics, polylactic acid (PLA) and polyhydroxy butyrate (PHB), on the proliferation of antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs) during anaerobic digestion (AD). Both bioplastics (250-500 particles) could be degraded to a certain extent over 79 days, as indicated by higher methane production than the control without bioplastic particles. The PHB 500 reactor showed the highest methane yield along with the highest biodegradation efficiency (91 %) than other reactors amended with PHB and PLA particles. The highest ARG and MGE abundances were also observed in PLA 500, and the lowest ARG abundance was in PLA 250. Conversely, PHB reactors showed a relatively lower ARG abundance than the control. The correlation analysis suggested that most ARGs were positively correlated with PLA and negatively correlated with PHB (except for tetA, tetB, and tetX). Moreover, a correlation between MGEs and ARGs in PLA and PHB reactors was revealed by correlation analysis. These results show that AD responds differently to the different types/levels of bioplastics, which can ultimately influence the behavior of ARG proliferation. Thus, bioplastics may also pose a potential risk for spreading antibiotic resistance. These findings can be used as a basis for setting environmental standards for bioplastics and creating monitoring and control measures to prevent potential negative impacts on public health.

A review of the impact of conductive materials on antibiotic resistance genes during the anaerobic digestion of sewage sludge and animal manure

The urgent need to reduce the environmental burden of antibiotic resistance genes (ARGs) has become even more apparent as concerted efforts are made globally to tackle the dissemination of antimicrobial resistance. Concerning levels of ARGs abound in sewage sludge and animal manure, and their inadequate attenuation during conventional anaerobic digestion (AD) compromises the safety of the digestate, a nutrient-rich by-product of AD commonly recycled to agricultural land for improvement of soil quality. Exogenous ARGs introduced into the natural environment via the land application of digestate can be transferred from innocuous environmental bacteria to clinically relevant bacteria by horizontal gene transfer (HGT) and may eventually reach humans through food, water, and air. This review, therefore, discusses the prospects of using carbon- and iron-based conductive materials (CMs) as additives to mitigate the proliferation of ARGs during the AD of sewage sludge and animal manure. The review spotlights the core mechanisms underpinning the influence of CMs on the resistome profile, the steps to maximize ARG attenuation using CMs, and the current knowledge gaps. Data and information gathered indicate that CMs can profoundly reduce the abundance of ARGs in the digestate by easing selective pressure on ARGs, altering microbial community structure, and diminishing HGT.

Biofilm-based technology for industrial wastewater treatment: current technology, applications and future perspectives

The microbial community in biofilm is safeguarded from the action of toxic chemicals, antimicrobial compounds, and harsh/stressful environmental circumstances. Therefore, biofilm-based technology has nowadays become a successful alternative for treating industrial wastewater as compared to suspended growth-based technologies. In biofilm reactors, microbial cells are attached to static or free-moving materials to form a biofilm which facilitates the process of liquid and solid separation in biofilm-mediated operations. This paper aims to review the state-of-the-art of recent research on bacterial biofilm in industrial wastewater treatment including biofilm fundamentals, possible applications and problems, and factors to regulate biofilm formation. We discussed in detail the treatment efficiencies of fluidized bed biofilm reactor (FBBR), trickling filter reactor (TFR), rotating biological contactor (RBC), membrane biofilm reactor (MBfR), and moving bed biofilm reactor (MBBR) for different types of industrial wastewater treatment. Besides, biofilms have many applications in food and agriculture, biofuel and bioenergy production, power generation, and plastic degradation. Furthermore, key factors for regulating biofilm formation were also emphasized. In conclusion, industrial applications make evident that biofilm-based treatment technology is impactful for pollutant removal. Future research to address and improve the limitations of biofilm-based technology in wastewater treatment is also discussed.

The coexistence of copper ions and TC affected the binding ability and the reaction order between extracellular polymeric substances of aerobic granular sludge and exogenous substances

As a barrier against external toxic effects, extracellular polymeric substances (EPSs) directly affect the toxicity and removal efficiency of exogenous substances. The reaction of EPSs with exogenous substances has been taken into consideration. The contents of EPSs in sludge cultivated by different influent water vary greatly, which leads to great differences in the binding ability and reaction sequence between EPSs and exogenous substances. However, the results in this respect are very limited. In this study, the binding characteristics between exogenous tetracycline (TC)/copper ions (Cu²⁺) and EPSs from aerobic granular sludge cultured under single and coexisting TC/Cu²⁺ were assessed by three-dimensional fluorescence-parallel factor analysis. The pollutants in the influent water could directionally induce microorganisms to secrete more EPSs, while fluorescence substances in EPSs could combine with the exogenous substances to lessen their effects. In the presence of coexisting TC and Cu²⁺ in the influent water, the ability of fluorescence substances in EPSs to combine with exogenous TC or Cu²⁺ weakened, and humic substances in EPSs were more susceptible than protein substances to binding with exogenous substances. However, the reaction order between EPSs components and exogenous TC or Cu²⁺ was opposite, and the ability of fluorescence substances in EPSs to combine with exogenous TC or Cu²⁺ was enhanced under individual TC or Cu²⁺ existing in the influent water. This study provided new insights into the interaction between EPSs and exogenous substances.

Spatial distribution of fecal pollution indicators in sewage sludge flocs and their removal and inactivation as revealed by qPCR/viability-qPCR during potassium ferrate treatment

Sludge reuse and utilization is one of important routines of disseminating fecal pollution to surface water and groundwater. However, it remains unclear the spatial distribution of fecal pollution indicators in sludge flocs and their reductions during sludge treatment processes. In this study, the abundances of fecal pollution indicators including cross-assembly phage (crAssphage), JC and BK polyomavirus (JCPyV, BKPyV), human adenovirus (HAdV), the human-specific HF183 Bacteroides (HF183) and Escherichia coli (EC) in soluble extracellular polymeric substances (S-EPS), loosely-bound EPS (LB-EPS), tightly-bound EPS (TB-EPS), and pellets of sludge flocs were determined, and the effect of potassium ferrate (PF) treatment on their removal and inactivation was investigated by using both qPCR and viability-qPCR. Results showed that all investigated indicators were detected in each fraction of sludge flocs. The PF treatment led to a great migration of indicators from sludge pellets to sludge EPS and some extent of their inactivation in each fraction of sludge flocs. The overall reductions of human fecal indicators in sludge determined by qPCR were 0-1.30 logs, which were 0-2 orders of magnitude lower than those of 0.69-2.39 logs detected by viability-qPCR, implying their inactivation by PF treatment to potentially alleviate the associated human health risks.

Insight into the interaction between trimethoprim and soluble microbial products produced from biological wastewater treatment processes

Soluble microbial products (SMPs), dissolved organic matter excreted by activated sludge, can interact with antibiotics in wastewater and natural water bodies. Interactions between SMPs and antibiotics can influence antibiotic migration, transformation, and toxicity but the mechanisms involved in such interactions are not fully understood. In this study, integrated spectroscopy approaches were used to investigate the mechanisms involved in interactions between SMPs and a representative antibiotic, trimethoprim (TMP), which has a low biodegradation rate and has been detected in wastewater. The results of liquid chromatography-organic carbon detection-organic nitrogen detection indicated that the SMPs used in the study contained 15% biopolymers and 28% humic-like substances (based on the total dissolved organic carbon concentration) so would have contained sites that could interact with TMP. A linear relationship of fluorescent intensities of tryptophan protein-like substances in SMP was observed (R²>0.99), indicating that the fluorescence enhancement between SMP and TMP occurred. Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy indicated that carboxyl, carbonyl, and hydroxyl groups were the main functional groups involved in the interactions. The electrostatic and π-π interactions were discovered by the UV-vis spectra and ¹H nuclear magnetic resonance spectra. Structural representations of the interactions between representative SMP subcomponents and TMP were calculated using density functional theory, and the results confirmed the conclusions drawn from the ¹H nuclear magnetic resonance spectra. The results help characterize SMP-TMP complexes and will help understand antibiotic transformations in wastewater treatment plants and aquatic environments.

Biotransformation of sulfamonomethoxine in a granular sludge system: Pathways and mechanisms

The biotransformation of sulfamonomethoxine (SMM) was studied in an aerobic granular sludge (AGS) system to understand the role of sorption by microbial cells and extracellular polymeric substances (EPS) and the role of functional microbe/enzyme biodegradation. Biodegradation played a more important role than adsorption, while microbial cells covered with tightly bound EPS (TB-EPS) showed higher adsorption capacity than microbial cells themselves or microbial cells covered with both loosely bound EPS (LB-EPS) and TB-EPS. The binding tests between EPS and SMM and the spectroscopic analyses (3D-EEM, UV-Vis, and FTIR) were performed to obtain more information about the adsorption process. The data showed that SMM could interact with EPS by combining with aromatic protein compounds, fulvic acid-like substances, protein amide II, and nucleic acids. Batch tests with various substances showed that SMM removal rates were in an order of NH₂OH (60.43 ± 2.21 μg/g SS) > NH₄Cl (52.96 ± 0.30 μg/g SS) > NaNO₃ (31.88 ± 1.20 μg/g SS) > NaNO₂ (21.80 ± 0.42 μg/g SS). Hydroxylamine and hydroxylamine oxidoreductase (HAO) favored SMM biotransformation and the hydroxylamine-mediated biotransformation of SMM was more effective than others. In addition, both ammonia monooxygenase (AMO) and CYP450 were able to co-metabolize SMM. Analysis of UPLC-QTOF-MS indicated the biotransformation mechanisms, revealing that acetylation of arylamine, glucuronidation of sulfonamide, deamination, SO₂ extrusion, and δ cleavage were the five major transformation pathways. The detection of TP202 in the hydroxylamine-fed Group C indicated a new biotransformation pathway through HAO. This study contributes to a better understanding of the biotransformation of SMM.

Mechanisms of interaction between polystyrene nanoplastics and extracellular polymeric substances in the activated sludge cultivated by different carbon sources

Nanoplastics (NPs) are ubiquitously present in wastewater treatment plants, which would be removed by the flocculation of extracellular polymeric substances (EPS) from activated sludge. However, the interaction mechanisms between NPs and EPS of activated sludge remain largely unexplored. This study investigated the interaction mechanisms between polystyrene nanoplastics (PS-NPs) and EPS with sodium acetate (NaAc), methanol (MeOH) and glucose (GLC) as carbon sources. The results showed that the functional group involved in the interactions between PS-NPs and EPS was the carbonyl of protein amide I region. The interaction between PS-NPs and EPS increased the β-sheets content, decreased the ratio of α-helix to (β-sheet + random coil), and changed the protein secondary structures to strong rigidity. This enhanced the flocculation of activated sludge cultivated by these three carbon sources. The flocculation between PS-NPs and EPS in activated sludge using NaAc as the carbon source was the strongest among these three carbon sources. Therefore, the degree of flocculation between NPs and EPS of activated sludge in wastewater treatment plants varies with carbon sources. This work provides a reference for the NPs removal mechanisms from wastewater, which will help to understand the migration behavior of MPs and NPs in wastewater treatment processes.

Insight into different adsorption behaviors of two fluoroquinolone antibiotics by sediment aggregation fractions

Sediment, consisting of different aggregation fractions, is a hotspot site for transport and transformation of various pollutants including antibiotics. However, the fate of different antibiotics in aquatic sediments mediated by sediment aggregation fraction adsorption and the mechanism behinds are still unclear. In this study, we investigated the adsorption behavior of two fluoroquinolone antibiotics (ciprofloxacin and ofloxacin) on four aggregation fractions separated from the sediment of Taihu Lake, a typical lake contaminated by antibiotics in China. The results showed that the adsorption of ciprofloxacin and ofloxacin fitted the Freundlich model, irrespective of sediment aggregation size. The adsorption of ciprofloxacin and ofloxacin was depended on the size of sediment aggregation fractions, and the macroaggregation (> 200 μm) exhibited the strongest capacity, followed by large microaggregation (63-200 μm), medium microaggregation (20-63 μm), and small and primary microaggregation (< 20 μm). This fraction size-dependent effects of sediment aggregations on antibiotic adsorption might be closely related to the differences in their specific surface areas, organic matter contents, and surface functional groups. The adsorption of ciprofloxacin and ofloxacin by sediment aggregation fractions was characterized by a combination of chemical and physical adsorptions, with the former being the dominant process. Compared with ofloxacin, ciprofloxacin could be more rapidly and easily absorbed by four sediment aggregation fractions, and more readily complexed with carboxyl groups on macroaggregation surface. The adsorption of two antibiotics by extracellular polymeric substance showed that tryptophan and tyrosine protein-like, humic-like substance on the surface of sediment could bind to both antibiotics through a complexation reaction. The π-π electron donor-acceptor interaction and hydrogen bonds were responsible for the antibiotic adsorption by sediment aggregation.

Characterization of copper binding to biochar-derived dissolved organic matter: Effects of pyrolysis temperature and natural wetland plants

Characterization of the biochar-derived dissolved organic matter (BDOM) is essential to understanding the environmental efficacy of biochar and the behavior of heavy metals. In this study, the binding properties of BDOM derived from different pyrolysis temperatures, wetland plants, and plant organs with Cu was investigated based on a multi-analytical approach. In general, the pyrolysis temperature exhibited a more significant impact on both the spectral characteristics of BDOM and Cu binding behavior than those of the feedstocks. With the pyrolysis temperature increased, the dissolved organic carbon, aromaticity, and fluorescence substance of BDOM decreased and the structure became more condensed. Humic-and tryptophan-like substance was more susceptible to the addition of Cu for BDOM pyrolyzed at 300 ℃ and 500 ℃, respectively. In addition, the more tyrosine-like substance is involved in Cu binding at higher pyrolysis temperature (500 ℃). However, the fluvic-like substance occurred preferentially with Cu than the other fluorophores. Moreover, the higher binding capacity for Cu was exhibited by the humic-like substance and by BDOM derived from the higher pyrolysis temperature and the lower elevation plants with the corresponding average stability constants (log K_M) of 5.58, 5.36, and 5.16.

Fate of intracellular, extracellular polymeric substances-associated, and cell-free antibiotic resistance genes in anaerobic digestion of thermally hydrolyzed sludge

Thermal hydrolysis of sludge is a promising approach to mitigate antibiotic resistance genes (ARGs) propagation in anaerobic digestion (AD). Although ARGs in sludge may be fractioned into intracellular, extracellular polymeric substance (EPS)-associated, and cell-free ARGs, the fate of these different fractions in AD has never been investigated. This study presents a detailed characterization of intracellular and extracellular ARGs in AD of sludge thermally hydrolyzed at 90 °C and 140 °C. EPS-associated ARGs represented the major fraction of the total extracellular ARGs in all samples, while its lowest abundance was observed for thermal hydrolysis at 140 °C along with the lowest EPS levels. The results suggested a positive correlation between EPS-associated ARGs with intracellular and cell-free ARGs. Furthermore, various EPS components, such as proteins and e-DNA, were positively correlated with β-lactam resistance genes. sul1 dominated all samples as an EPS-associated resistance gene. These results provide new insights into the significance of different ARGs fractions in their overall dissemination in AD integrated with thermal hydrolysis.

Effect of minute amounts of arsenic on the sulfamethoxazole removal and microbial community structure via the SBR system

In this study, the effect of arsenic on the sulfamethoxazole (SMX) removal efficiency and microbial community structure was investigated over 60 days using the SBR process. The results showed that the presence of arsenic had no significant impact on the system performance, the removal efficiencies of two reactors, R1 (the control test) and R2 (with the addition of arsenic), were 13.36 ± 5.71 and 14.20 ± 5.27%, which were attributed to the adsorption of SMX by fulvic acid-like substances and tryptophan-like proteins of extracellular polymeric substances. Compared to the seed sludge, the species number indicated that R2 possessed the richer diversity, while R1 possessed the lower diversity on day 60, which might be relative to the transferring of antibiotic resistance genes (ARGs) in sludge bacterial communities; the minute amounts of arsenic could make the relative levels of Sul1 and Sul2 genes which encode ARGs of sulfonamides in R2 (2.07 and 2.47%) be higher than that in R1 (1.65 and 1.27%), which made the bacterial community of the R2 system more adaptable to SMX stress. Therefore, the minute amounts of arsenic weakened the effect of SMX on the system and enhanced the stability of the microbial community structure.

Extracellular polymeric substances-antibiotics interaction in activated sludge: A review

Antibiotics, the most frequently prescribed drugs, have been widely applied to prevent or cure human and veterinary diseases and have undoubtedly led to massive releases into sewer networks and wastewater treatment systems, a hotspot where the occurrence and transformation of antibiotic resistance take place. Extracellular polymeric substances (EPS), biopolymers secreted via microbial activity, play an important role in cell adhesion, nutrient retention, and toxicity resistance. However, the potential roles of sludge EPS related to the resistance and removal of antibiotics are still unclear. This work summarizes the composition and physicochemical characteristics of state-of-the-art microbial EPS, highlights the critical role of EPS in antibiotics removal, evaluates their defense performances under different antibiotics exposures, and analyzes the typical factors that could affect the sorption and biotransformation behavior of antibiotics. Next, interactions between microbial EPS and antibiotic resistance genes are analyzed. Future perspectives, especially the engineering application of microbial EPS for antibiotics toxicity detection and defense, are also emphatically stressed.

Characterization of dissolved black carbon and its binding behaviors to ceftazidime and diclofenac pharmaceuticals: Employing the molecular weight fractionation

As the ubiquitous component of the aquatic environment, dissolved organic matter (DOM) readily bind with residual pharmaceutical contaminants (PCs) and influence their environmental behaviors. However, the binding mechanisms between dissolved black carbon (DBC), a vital part of the natural DOM pool, and PCs were poorly researched. In this study, the bulk DBC was divided into four fractions in molecular weight (MW) via an ultrafiltration system, and the properties of DBC and their binding interaction with two kinds of typical PCs (ceftazidime (CAZ) and diclofenac (DCF)) were explored concretely. The results showed that low MW component was the main contributor to bulk DBC, and the aromaticity increased with the increase of MW. The categories of chemical structures and fluorescent substances in different MW DBC were similar. Multispectral techniques showed that the oxygen-enriched compounds in DBC had the higher affinity to CAZ/DCF. The -NH-, -COOH, -NH₂ groups in CAZ molecules appeared to form the hydrogen bond with DBC. Fluorescence quenching experiments were analyzed, and the binding mechanisms were specifically expounded from the thermodynamic perspective. The fluorophore of fulvic acid-like compounds (FA) were quenched by both static and dynamic quenching mechanisms, while only static quenching occurred for humic acid-like compounds (HA). For bulk DBC, the hydrogen bond and van der Waals force were the major forces in the HA-CAZ system, while the hydrophobic force made the primary contribution to the HA-DCF system, which might be ascribed to the higher hydrophobic nature of DCF. Notably, with the increase of HA MW, the main binding mode of HA-CAZ/DCF changed from hydrophobic force to hydrogen bond and van der Waals force gradually, which also directly proved that various noncovalent interactions co-driven the binding processes. Our findings are beneficial to better assess the fate of DBC and PCs and the corresponding complexes in the aquatic environment.

Interactions between tannins allelochemicals and extracellular polymeric substance (EPS) of Microcystis aeruginosa

The protective mechanism of extracellular polymeric substance (EPS) secreted by a harmful cyanobacteria against tannins allelochemicals was explored in this study. The binding properties of soluble EPS (SEPS) and bound EPS (BEPS) of Microcystis aeruginosa to tannic acid (TA) were investigated via fluorescence spectroscopy. The results suggested that TA interacted with the proteins in SEPS and BEPS mainly with binding constants of 5.26 and 7.93 L/mol, respectively; TA interacted with the humic acids in SEPS and BEPS mainly with binding constants of 5.12 and 5.24 L/mol, respectively. Thermodynamic experiments confirmed that the binding was mainly controlled by the hydrophobic force. Combined with Fourier transform infrared spectroscopy, it was found that the amine, carbonyl, carboxyl, and hydroxyl groups in EPS were the main functional groups contributing to the interaction of TA with EPS. The existence of EPS reduced the toxicity of TA to algal cells, with the 96 h inhibition rate of 40 mg L^-1 TA on algal cells decreasing by 48.95%. The results of this study may improve our understanding of the protective mechanism of cyanobacteria against tannins allelochemicals.