Do biological-based strategies hold promise to biofouling control in MBRs?

Mechanisms and Strategies of Advanced Oxidation Processes for Membrane Fouling Control in MBRs: Membrane-Foulant Removal versus Mixed-Liquor Improvement

Membrane bioreactors (MBRs) are well-established and widely utilized technologies with substantial large-scale plants around the world for municipal and industrial wastewater treatment. Despite their widespread adoption, membrane fouling presents a significant impediment to the broader application of MBRs, necessitating ongoing research and development of effective antifouling strategies. As highly promising, efficient, and environmentally friendly chemical methods for water and wastewater treatment, advanced oxidation processes (AOPs) have demonstrated exceptional competence in the degradation of pollutants and inactivation of bacteria in aqueous environments, exhibiting considerable potential in controlling membrane fouling in MBRs through direct membrane foulant removal (MFR) and indirect mixed-liquor improvement (MLI). Recent proliferation of research on AOPs-based antifouling technologies has catalyzed revolutionary advancements in traditional antifouling methods in MBRs, shedding new light on antifouling mechanisms. To keep pace with the rapid evolution of MBRs, there is an urgent need for a comprehensive summary and discussion of the antifouling advances of AOPs in MBRs, particularly with a focus on understanding the realizing pathways of MFR and MLI. In this critical review, we emphasize the superiority and feasibility of implementing AOPs-based antifouling technologies in MBRs. Moreover, we systematically overview antifouling mechanisms and strategies, such as membrane modification and cleaning for MFR, as well as pretreatment and in-situ treatment for MLI, based on specific AOPs including electrochemical oxidation, photocatalysis, Fenton, and ozonation. Furthermore, we provide recommendations for selecting antifouling strategies (MFR or MLI) in MBRs, along with proposed regulatory measures for specific AOPs-based technologies according to the operational conditions and energy consumption of MBRs. Finally, we highlight future research prospects rooted in the existing application challenges of AOPs in MBRs, including low antifouling efficiency, elevated additional costs, production of metal sludge, and potential damage to polymeric membranes. The fundamental insights presented in this review aim to elevate research interest and ignite innovative thinking regarding the design, improvement, and deployment of AOPs-based antifouling approaches in MBRs, thereby advancing the extensive utilization of membrane-separation technology in the field of wastewater treatment.

Achieving zero fouling in the ultrafiltration for secondary water supply systems in the absence of residual chlorine

Ultrafiltration (UF) technology is widely used in secondary water supply systems (SWSS) to provide high-quality drinking water. However, the challenge of severe membrane fouling, which leads to frequent cleaning requirements, makes UF maintenance intensive. In this study, we tried to validate the feasibility of achieving zero fouling without the need for cleaning in the UF for SWSS, i.e., the fouling resistance can be maintained for a very long time without any increase. We operated dead-end UF systems at different fluxes, both with and without residual chlorine, and monitored the formation of fouling layers during filtration. The results demonstrated the successful achievement of zero fouling under a flux of 10 L/(m2 h) in the absence of chlorine, evidenced by no increase in transmembrane pressure for three months. This zero-fouling phenomenon was attributed to the formation of a self-regulating biofouling layer. This biofouling layer could degrade the deposited foulants and featured a loose morphology, facilitated by microbial activities in the cake layer. Although residual chlorine reduced the fouling rate by half at a flux of 30 L/(m2 h), it hindered the achievement of zero fouling at the lower flux of 10 L/(m2 h), due to its inhibitory effect on microbial activity. Intermittent operation of UF was effective in achieving zero fouling at higher fluxes (e.g., 30 L/(m2 h)). This benefit was primarily ascribed to the biodegradation of accumulated foulants and the expansion of biofouling layer during the pause of the intermittent filtration, which prompted the formation of biofouling layers with loose structure and balanced composition. To the best of our knowledge, this study is the first attempt to achieve zero fouling in UF for SWSS, and the findings may offer valuable insights for the development of cleaning-free and low-maintenance membrane processes.

Effect of quorum quenching on biofouling control and microbial community in membrane bioreactors by Brucella sp. ZJ1

Quorum quenching (QQ) has been demonstrated to be a novel technique for controlling biofouling in membrane bioreactors (MBRs), as it can significantly inhibit biofilm formation by disrupting quorum sensing (QS). The exploration of new QQ bacterial strains and the evaluation of their performance in mitigating membrane fouling in MBR systems is significant. In this study, an efficient QQ strain, Brucella sp. ZJ1 was encapsulated in alginate beads and evaluated for its ability to mitigate biofouling. The findings revealed that MBR with QQ beads extended the operation time by 2-3 times without affecting pollutant degradation. QQ beads maintained approximately 50% QQ activity after more than 50 days operation, indicating a long-lasting and endurable QQ effect. The QQ effect reduced extracellular polymeric substance (EPS) production especially in terms of polysaccharide and protein by more than 40%. QQ beads in the MBR also reduced the cake resistance and the irreversible resistance of membrane biofouling. Metagenomic sequencing suggests that QQ beads suppressed the QS effect and increased the abundance of QQ enzyme genes, ultimately inducing efficient membrane biofouling control.

A Review on Membrane Biofouling: Prediction, Characterization, and Mitigation

Water scarcity is an increasing problem on every continent, which instigated the search for novel ways to provide clean water suitable for human use; one such way is desalination. Desalination refers to the process of purifying salts and contaminants to produce water suitable for domestic and industrial applications. Due to the high costs and energy consumption associated with some desalination techniques, membrane-based technologies have emerged as a promising alternative water treatment, due to their high energy efficiency, operational simplicity, and lower cost. However, membrane fouling is a major challenge to membrane-based separation as it has detrimental effects on the membrane's performance and integrity. Based on the type of accumulated foulants, fouling can be classified into particulate, organic, inorganic, and biofouling. Biofouling is considered the most problematic among the four fouling categories. Therefore, proper characterization and prediction of biofouling are essential for creating efficient control and mitigation strategies to minimize the damage associated with biofouling. Moreover, the use of artificial intelligence (AI) in predicting membrane fouling has garnered a great deal of attention due to its adaptive capability and prediction accuracy. This paper presents an overview of the membrane biofouling mechanisms, characterization techniques, and predictive methods with a focus on AI-based techniques, and mitigation strategies.

Two strategies of stubborn biofouling strains surviving from NaClO membrane cleaning: EPS shielding and/or quorum sensing

The declined performance of repeated chemically-enhanced-backwashing (CEB) seriously hampered the sustainable operation of membrane bioreactor (MBR) in long-term, and could be partially attributed to the strengthened anti-cleaning properties of residual stubborn microbes. Although plenty of research has been done towards either the model strains or the whole post-CEB microbial community, little was known about the resisting behavior of practical stubborn strains when confronting oxidative stresses induced by NaClO. Hence, this study isolated 21 strains from samples in a large-scale MBR plant with routine CEB treatment. To unravel how they survive and affect membrane fouling, their anti-oxidation ability, fouling potential and quorum sensing (QS) effect before and after NaClO stimuli were evaluated. The composition and molecular weight distribution of extracellular polymeric substance (EPS) were also investigated to understand their roles during the anti-CEB process. It was found that typical stubborn strains tended to secrete more EPS as protective shields, where polysaccharides (especially the ones >1 kDa) made major contribution. However, sometimes EPS could not well resist the stimuli, with consequent low survival rate and high intracellular ROS level. Under such circumstances, stubborn strains would rather choose to be sensitive with surged QS level and quick population regrowth to maintain vitality under the oxidative stresses. Both strategies aggravated biofouling and eventually enhanced the anti-cleaning properties of biofilm.

Green Solvent Cleaning Removes Irrecoverable Foulants from End-of-Life Membranes in Membrane Bioreactors: Efficacy and Mechanisms

Removal of irrecoverable foulants, which cannot be removed by conventional chemical cleaning, from end-of-life (EOL) membranes remains a substantial challenge due to the strong interaction between the foulants and membrane matrix. Herein, we developed a green solvent cleaning strategy based on Hansen solubility parameters to achieve the removal of irrecoverable foulants from the EOL polyvinylidene fluoride (PVDF) membranes serving for 6 years in a large-scale membrane bioreactor (MBR). We selected methyl-5-(dimethylamino)-2-methyl-5-oxopentanoate (MDMO) as the green solvent due to its strong interaction with the PVDF material, which might enable the substitution of binding sites of irrecoverable foulants. After the MDMO cleaning, the water permeance of the EOL membrane recovered from 47.6 ± 4.7 to 390.9 ± 8.2 L m^-2 h^-1 bar^-1 (with a flux recovery ratio of ∼100%), with its rejection ability and stability maintained. The main components of irrecoverable fouling were humic acid-like substances revealed by spectroscopic characterization. Molecular dynamic simulation further elucidated the cleaning mechanisms: the strong interaction of MDMO-PVDF enabled substitution of binding sites of irrecoverable foulants by MDMO, followed by desorption of the irrecoverable foulants from PVDF and diffusion of the irrecoverable foulants into the bulk phase of MDMO. Evaluation in a lab-scale MBR treating real municipal wastewater verified the reusability of green solvent cleaned-EOL membranes. This study provides a novel, effective, and green cleaning strategy to remove irrecoverable foulants and prolong the service life of membranes in MBRs, facilitating sustainable wastewater treatment using membrane-based processes.

Exploring the Function of Quorum Sensing Regulated Biofilms in Biological Wastewater Treatment: A Review

Quorum sensing (QS), a type of bacterial cell–cell communication, produces autoinducers which help in biofilm formation in response to cell population density. In this review, biofilm formation, the role of QS in biofilm formation and development with reference to biological wastewater treatment are discussed. Autoinducers, for example, acyl-homoserine lactones (AHLs), auto-inducing oligo-peptides (AIPs) and autoinducer 2, present in both Gram-negative and Gram-positive bacteria, with their mechanism, are also explained. Over the years, wastewater treatment (WWT) by QS-regulated biofilms and their optimization for WWT have gained much attention. This article gives a comprehensive review of QS regulation methods, QS enrichment methods and QS inhibition methods in biological waste treatment systems. Typical QS enrichment methods comprise adding QS molecules, adding QS accelerants and cultivating QS bacteria, while typical QS inhibition methods consist of additions of quorum quenching (QQ) bacteria, QS-degrading enzymes, QS-degrading oxidants, and QS inhibitors. Potential applications of QS regulated biofilms for WWT have also been summarized. At last, the knowledge gaps present in current researches are analyzed, and future study requirements are proposed.

Membrane Fouling Mitigation in MBR via the Feast–Famine Strategy to Enhance PHA Production by Activated Sludge

Fouling is considered one of the main drawbacks of membrane bioreactor (MBR) technology. Among the main fouling agents, extracellular polymeric substances (EPS) are considered one of the most impactful since they cause the decrease of sludge filterability and decline of membrane flux in the long term. The present study investigated a biological strategy to reduce the membrane-fouling tendency in MBR systems. This consisted of seeding the reactor with activated sludge enriched in microorganisms with polyhydroxyalkanoate (PHA) storage ability and by imposing proper operating conditions to drive the carbon toward intracellular (PHA) rather than extracellular (EPS) accumulation. For that purpose, an MBR lab-scale plant was operated for 175 days, divided into four periods (1–4) according to different food to microorganisms’ ratios (F/M) (0.80 kg COD kg TSS⁻¹ d⁻¹ (Period 1), 0.13 kg COD kg TSS⁻¹ d⁻¹ (Period 2), 0.28 kg COD kg TSS⁻¹ d⁻¹ (Period 3), and 0.38 kg COD kg TSS⁻¹ d⁻¹ (Period 4)). The application of the feast/famine strategy favored the accumulation of intracellular polymers by bacteria. The increase of the PHA accumulation inside the cells corresponded to the decrease of EPS and an F/M of 0.40–0.50 kg COD kg TSS⁻¹ d⁻¹ was found as optimum to maximize the PHA production, while minimizing EPS. The lowest EPS content in the sludge (18% of total suspended solids) that corresponded to the maximum content of PHA (9.3%) was found in Period 4 and determined significant mitigation of the fouling rate, whose value was close to 0.10 × 10¹¹ m⁻¹ h⁻¹. Thus, by imposing proper operating conditions, it was possible to drive the organic matter toward PHA accumulation. Moreover, a lower EPS content corresponded to a decrease in the irreversible fouling mechanism, which would imply a lower frequency of the extraordinary cleaning operations. This study highlighted the possibility of obtaining a double benefit by applying an MBR system in the frame of wastewater valorization: minimizing the fouling tendency of the membrane and recovery precursors of bioplastics from wastewater in line with the circular economy model.

Role of nano-Fe3O4 particle on improving membrane bioreactor (MBR) performance: Alleviating membrane fouling and microbial mechanism

This study would investigate the effect of nano-Fe3O4 particles on the performance of membrane bioreactor (MBR), including membrane fouling, membrane rejection and microbial community. It can effectively alleviate membrane fouling and improve the effluent quality in MBR by bio-effect rather than nanoparticle adsorption. The lowest membrane fouling resistance was achieved at R4-MBR (sludge and membrane surface with nano-Fe3O4), which decreased by 46.08%. Meanwhile, R3-MBR (sludge with nano-Fe3O4) had the lowest concentration of COD in effluent which was below 20 mg/L in the stable phase of MBR operation. After applying nano-Fe3O4, the content of extracellular polymeric substances (EPS) and soluble microbial products (SMP) were both reduced with a lower molecular weight. From the microbial community analysis, the abundance of Proteobacteria increased from 25.06 to 45.11% at the phylum level in R3-MBR. It contributed to removing organic substances in MBRs. Moreover, the nano-Fe3O4 restricted Bacteroidetes growth, especially in R4-MBR, leading to a more excellent performance of membrane flux. Besides, the applied nano-Fe3O4 promoted the abundance of Quorum Quenching (QQ) microorganism, and declined the percentage of Quorum Sensing (QS) bacteria. Then, a lower content of N-Acyl-l-Homoserine Lactones (AHLs) in containing nano-Fe3O4 sludge. That was also prone to control membrane fouling. Overall, this study indicates the nano-Fe3O4 particle is appropriate for elevating MBR performance, such as membrane fouling and effluent quality, by bio-effect.

Current status of hypochlorite technology on the wastewater treatment and sludge disposal: Performance, principals and prospects

As cost-effective and high-efficient oxidants, the hypochlorite chemicals have been widely utilized for bleaching and disinfection. However, its potential applications in wastewater treatment and sludge disposal were less concerned. This paper mainly summarized the state-of-the-art applications of hypochlorite technology in wastewater and sludge treatment based on the main influencing factors and potential mechanisms of hypochlorite treatment. The results indicated that the hypochlorite approaches were not only effective in pollutants removal and membrane fouling mitigation for wastewater treatment, but also contributed to sludge dewatering and resource recovery for sludge disposal. The ClO^- and large generated free active radicals (i.e., reactive chlorine species and reactive oxygen species), which possessed strong oxidative ability, were the primary contributors to the pollutants decomposition, and colloids/microbes flocs disintegration during the hypochlorite treatment process. The performance of hypochlorite treatment was highly associated with various factors (i.e., pH, temperature, hypochlorite types and dosage). In combination with the reasonable activators (i.e., Fe²⁺ and ultraviolet), auxiliary agents, and innovative processes (i.e., hydrothermal and electro-oxidation), the operational performance of hypochlorite technology could be further enhanced. Finally, the feasibility and benefits of hypochlorite application for wastewater and sludge treatment were analyzed, and the existing challenges and future research efforts that need to be made have also prospected. The review can hopefully provide a theoretical basis and technical guidance to extend the application of hypochlorite technology for wastewater treatment and sludge disposal on large scale.

Membrane bioreactors for hospital wastewater treatment: recent advancements in membranes and processes

Discharged hospital wastewater contains various pathogenic microorganisms, antibiotic groups, toxic organic compounds, radioactive elements, and ionic pollutants. These contaminants harm the environment and human health causing the spread of disease. Thus, effective treatment of hospital wastewater is an urgent task for sustainable development. Membranes, with controllable porous and nonporous structures, have been rapidly developed for molecular separations. In particular, membrane bioreactor (MBR) technology demonstrated high removal efficiency toward organic compounds and low waste sludge production. To further enhance the separation efficiency and achieve material recovery from hospital waste streams, novel concepts of MBRs and their applications are rapidly evolved through hybridizing novel membranes (non hydrophilic ultrafiltration/microfiltration) into the MBR units (hybrid MBRs) or the MBR as a pretreatment step and integrating other membrane processes as subsequent secondary purification step (integrated MBR-membrane systems). However, there is a lack of reviews on the latest advancement in MBR technologies for hospital wastewater treatment, and analysis on its major challenges and future trends. This review started with an overview of main pollutants in common hospital waste-water, followed by an understanding on the key performance indicators/criteria in MBR membranes (i.e., solute selectivity) and processes (e.g., fouling). Then, an in-depth analysis was provided into the recent development of hybrid MBR and integrated MBR-membrane system concepts, and applications correlated with wastewater sources, with a particular focus on hospital wastewaters. It is anticipated that this review will shed light on the knowledge gaps in the field, highlighting the potential contribution of hybrid MBRs and integrated MBR-membrane systems toward global epidemic prevention.

Relative Importance of Stochastic Assembly Process of Membrane Biofilm Increased as Biofilm Aged

The relative importance of different ecological processes controlling biofilm community assembly over time on membranes with different surface characteristics has never been investigated in membrane bioreactors (MBRs). In this study, five ultrafiltration hollow-fiber membranes - having identical nominal pore size (0.1μm) but different hydrophobic or hydrophilic surface characteristics - were operated simultaneously in the same MBR tank with a constant flux of 10 liters per square meter per hour (LMH). In parallel, membrane modules operated without permeate flux (0 LMH) were submerged in the same MBR tank, to investigate the passive microbial adsorption onto different hydrophobic or hydrophilic membranes. Samples from the membrane biofilm were collected after 1, 10, 20, and 30days of continuous filtration. The membrane biofilm microbiome were investigated using 16S rRNA gene amplicon sequencing from DNA and cDNA samples. Similar beta diversity trends were observed for both DNA- and cDNA-based analyses. Beta diversity analyses revealed that the nature of the membrane surface (i.e., hydrophobic vs. hydrophilic) did not seem to have an effect in shaping the bacterial community, and a similar biofilm microbiome evolved for all types of membranes. Similarly, membrane modules operated with and without permeate flux did not significantly influence alpha and beta diversity of the membrane biofilm. Nevertheless, different-aged membrane biofilm samples exhibited significant differences. Proteobacteria was the most dominant phylum in early-stage membrane biofilm after 1 and 10days of filtration. Subsequently, the relative reads abundance of the phyla Bacteroidetes and Firmicutes increased within the membrane biofilm communities after 20 and 30days of filtration, possibly due to successional steps that lead to the formation of a relatively aged biofilm. Our findings indicate distinct membrane biofilm assembly patterns with different-aged biofilm. Ecological null model analyses revealed that the assembly of early-stage biofilm community developed after 1 and 10days of filtration was mainly governed by homogenous selection. As the biofilm aged (days 20 and 30), stochastic processes (e.g., ecological drift) started to become important in shaping the assembly of biofilm community.

UV and bacteriophages as a chemical-free approach for cleaning membranes from anaerobic bioreactors

Anaerobic membrane bioreactor (AnMBR) for wastewater treatment has attracted much interest due to its efficacy in providing high-quality effluent with minimal energy costs. However, membrane biofouling represents the main bottleneck for AnMBR because it diminishes flux and necessitates frequent replacement of membranes. In this study, we assessed the feasibility of combining bacteriophages and UV-C irradiation to provide a chemical-free approach to remove biofoulants on the membrane. The combination of bacteriophage and UV-C resulted in better log cells removal and ca. 2× higher extracellular polymeric substance (EPS) concentration reduction in mature biofoulants compared to either UV-C or bacteriophage alone. The cleaning mechanism behind this combined approach is by 1) reducing the relative abundance of Acinetobacter spp. and selected bacteria (e.g., Paludibacter, Pseudomonas, Cloacibacterium, and gram-positive Firmicutes) associated with the membrane biofilm and 2) forming cavities in the biofilm to maintain water flux through the membrane. When the combined treatment was further compared with the common chemical cleaning procedure, a similar reduction on the cell numbers was observed (1.4 log). However, the combined treatment was less effective in removing EPS compared with chemical cleaning. These results suggest that the combination of UV-C and bacteriophage have an additive effect in biofouling reduction, representing a potential chemical-free method to remove reversible biofoulants on membrane fitted to an AnMBR.

Exploration on Optimized Control Way of D-Amino Acid for Efficiently Mitigating Membrane Biofouling of Membrane Bioreactor

The thorny issue of membrane biofouling in membrane bioreactors (MBR) calls for new effective control measures. Herein, D-amino acid (DAA) was employed to mediate MBR membrane biofouling by inhibiting biofilm information and disintegrating formed biofilm. Different DAA control ways involving membrane property, DAA-adding timing, and DAA-control mode were explored through experiments and the multiple linear regression model and the response surface methodology. The optimized DAA control ways were acquired, involving DAA used as an active agent, and the DAA-adding timing of 4 h cultured before running, as well as both hydrophilic and hydrophobic membrane, resulting in an approximately 40.24% decrease in the membrane biofouling rate in comparison with the conventional MBR. DAA is an efficient membrane biofouling mediating approach for MBR under optimized control ways combination and a facile solution for solving membrane biofouling in actual membrane systems.

Phage Biocontrol of Pseudomonas aeruginosa in Water

Bacteriophage control of harmful or pathogenic bacteria has aroused growing interest, largely due to the rise of antibiotic resistance. The objective of this study was to test phages as potential agents for the biocontrol of an opportunistic pathogen Pseudomonas aeruginosa in water. Two P. aeruginosa bacteriophages (vB_PaeM_V523 and vB_PaeM_V524) were isolated from wastewater and characterized physically and functionally. Genomic and morphological characterization showed that both were myoviruses within the Pbunavirus genus. Both had a similar latent period (50-55 min) and burst size (124-134 PFU/infected cell), whereas there was variation in the host range. In addition to these environmental phages, a commercial Pseudomonas phage, JG003 (DSM 19870), was also used in the biocontrol experiments. The biocontrol potential of the three phages in water was tested separately and together as a cocktail against two P. aeruginosa strains; PAO1 and the environmental strain 17V1507. With PAO1, all phages initially reduced the numbers of the bacterial host, with phage V523 being the most efficient (>2.4 log10 reduction). For the environmental P. aeruginosa strain (17V1507), only the phage JG003 caused a reduction (1.2 log10) compared to the control. The cocktail of three phages showed a slightly higher decrease in the level of the hosts compared to the use of individual phages. Although no synergistic effect was observed in the host reduction with the use of the phage cocktail, the cocktail-treated hosts did not appear to acquire resistance as rapidly as hosts treated with a single phage. The results of this study provide a significant step in the development of bacteriophage preparations for the control of pathogens and harmful microbes in water environments.

Bacterial and Microfauna Mechanisms for Sludge Reduction in Carrier-Enhanced Anaerobic Side-Stream Reactors Revealed by Metagenomic Sequencing Analysis

Packing carriers into the anaerobic side-stream reactor (ASSR) can enhance sludge reduction and save footprint by investigating ASSR-coupled membrane bioreactors (AP-MBRs) under different hydraulic residence times of the ASSR (HRT_SR). Three AP-MBRs and an anoxic-aerobic MBR (AO-MBR) showed efficient chemical oxygen demand (>94.2%) and ammonium nitrogen removal (>99.3%). AP-MBRs have higher (p < 0.05) total nitrogen (61.4-67.7%) and total phosphorus (57.5-63.8%) removal than AO-MBRs (47.8 and 47.7%). AP-MBRs achieved sludge reduction efficiencies of 11.8, 31.8, and 36.2% at HRT_SR values of 2.5, 5.0, and 6.7 h. Packing carriers greatly improved sludge reduction under low HRT_SR and is promising for accelerating sludge reduction in compact space. Metagenomic sequencing analysis showed that genes responsible for metabolism were enriched in AO-MBRs, while genes related to cellular motility and cell signaling were more abundant in the AP-MBRs. A longevity-regulating pathway showed that long lifespan provided more opportunities for worms to prey bacteria. Microscopic examination revealed that some specific protozoa (Arcella, Clathrulina, Aspidisca, Litonotus, Chiloclonella, and Vorticella) and metazoa (Rotaria and Aeolosoma hemprichi) were enriched in ASSRs. Aeolosoma hemprichi was only detected in ASSRs, and unique Cylops appeared on carriers. These results contribute to growing understanding of micrometabolic mechanisms including functional genes and microfauna-driving sludge reduction.

QQ-PAC core-shell structured quorum quenching beads for potential membrane antifouling properties

Quorum quenching (QQ) has been proven to be an effective method to reduce MBR membrane biological contamination. In this paper, a novel and efficient QQ-PAC core-shell beads were prepared for mitigating the membrane contamination. The bead was composed of two parts: QQ bacteria embedded in the core and PAC in the shell. The microstructure of the bead was observed by scanning electron microscopy (SEM) and the functional groups were revealed by Fourier transform infrared spectroscopy (FTIR). Meanwhile, the mechanical strength, swelling property, penetration property and QQ activity of the core bead, the core shell-without PAC bead and the core shell-with PAC bead were compared. The core shell-with PAC structure improved the adsorption capacity under good mass transfer conditions. Besides, the combined effect of QQ bacteria and PAC enhanced the QQ effect and alleviated the process of MBR membrane biological contamination consequently. Therefore, the QQ-PAC core-shell beads have a potential possibility in MBR membrane fouling control as the immobilization technology of QQ bacteria.

Insights into the roles of membrane pore size and feed foulant concentration in ultrafiltration membrane fouling based on collision-attachment theory

Membrane property and feed characteristics play critical roles in membrane fouling. This paper aims to clarify the roles of membrane pore size (φ) and feed foulant concentration (C_b ) in ultrafiltration fouling induced by polysaccharides. The fouling behaviors were expounded by collision-attachment theory, where the rate of membrane fouling is mainly determined by collision frequency (JC_b ) and attachment efficiency (γ). At the initial fouling stage, rapid flux decline was observed at large φ or high C_b due to the great JC_b and/or γ. At the later fouling stage, there existed a nearly identical maximum stable flux attributing to the same JC_b and γ, which was independent of φ and C_b . Moreover, the smaller φ can lead to less foulants passed through the membrane and thus more foulants attaching on the membrane, while the higher C_b can give rise to more foulants on both the membrane surface and in the permeate. The results presented in current study provide fundamental basis in understanding membrane fouling. PRACTITIONER POINTS: Collision-attachment theory was employed to expound the UF fouling behavior. Rapid flux decline occurred at large membrane pore size or high feed foulant concentration in the initial fouling stage. Membranes with different pore size or feed foulant concentration had an identical flux at the latter fouling stage. Lowering membrane pore size or increasing feed foulant concentration can lead to more foulants attaching on the membrane surface.

Function of quorum sensing and cell signaling in wastewater treatment systems

Quorum sensing (QS) is a communication mode between microorganisms to regulate bacteria ecological relations and physiological behaviors, thus achieve the physiological function that single bacteria cannot complete. This phenomenon plays important roles in the formation of biofilm and granular sludge, and may be related to enhancement of some functional bacteria activity in wastewater treatment systems. There is a need to better understand bacterial QS in engineered reactors, and to assess how designs and operations might improve the removal efficiency. This article reviewed the recent advances of QS in several environmental systems and mainly analyzed the regulation mechanism of QS-based strategies for biofilm, granular sludge, functional bacteria, and biofouling control. The co-existences of multiple signal molecules in wastewater treatment (WWT) processes were also summarized, which provide basis for the future research on the QS mechanism of multiple signal molecules' interaction in WWT. This review would present some prospects and suggestions which are of practical significance for further application.

Microbial composition of a hydropower cooling water system reveals thermophilic bacteria with a possible role in primary biofilm formation

Microfouling, ie biofilm formation on surfaces, can have an economic impact and requires costly maintenance in water-powered energy generation systems. In this study, the microbiota of a cooling system (filter and heat exchanger) in the Irapé hydroelectric power plant in Brazil was examined. The goal was to identify bacteria that could be targeted to more efficiently reduce biofilm formation. Two sampling campaigns were made corresponding to two well-defined seasons of the Brazilian Cerrado biome: the dry (campaign 1) and the wet (campaign 2). Microfouling communities varied considerably over time in samples obtained at different times after the last clearance of the heat exchanger. The thermophilic bacteria Meiothermus, Thermomonas and Symbiobacterium were exclusive and abundant in the microfouling of the heat exchanger in campaign 2, while methanotrophs and iron-reducing bacteria were abundant only in filter sediments. These findings could help to guide strategies for ecofriendly measures to reduce biofilm fouling in hydroelectric power plants, minimizing environmental and economic losses.

Evaluating influence of filling fraction of carriers packed in anaerobic side-stream reactors on membrane fouling and microbial community of the coupled membrane bioreactors

An anoxic/oxic membrane bioreactors (AO-MBR) and three identical anaerobic side-stream reactor coupled with anoxic/oxic membrane bioreactors (ASSR-MBR) were constructed and operated in parallel to investigate the appropriate filling fraction of carriers packed in ASSR, influences on pollutants removal, sludge reduction, membrane fouling and microbial community of ASSR-MBR. Inserting ASSR achieved efficient COD removal and nitrification, and packing carriers in ASSR obtained the highest sludge reduction efficiency of 50.5 % at filling fraction of 25 %. Compared to AO-MBR, inserting ASSR without carriers induced the release of viscous components in extracellular polymeric substances (EPS) and the formation of calcium carbonate-related bacteria on membrane surface, and thus deteriorated membrane fouling. Packing carriers with 25 % filling fraction promoted the hydrolysis of soluble microbial products and EPS, whilst reduced the viscoelasticity of sludge flocs. Higher filling fraction of 50 % increased the shear forces to the biofilm and biomarkers related to membrane fouling, and thus showed little improvement to alleviate membrane fouling. MiSeq sequencing revealed that although it enriched in the bulk sludge of conventional ASSR-MBR and the coupled reactor with filling fraction of 50 %, the floc-forming, hydrolytic and fermentative bacteria were more inclined to attach on the membrane surface and alleviate fouling process.

Feasibility of isolated novel facultative quorum quenching consortiums for fouling control in an AnMBR

Anaerobic membrane bioreactor (AnMBR) technology is being recognized as an appealing strategy for wastewater treatment, however, severity of membrane fouling inhibits its widespread implementations. This study engineered novel facultative quorum quenching consortiums (FQQs) coping with membrane fouling in AnMBRs with preliminary analysis for their quorum quenching (QQ) performances. Herein, Acyl-homoserine lactones (AHLs)-based quorum sensing (QS) in a lab-scale AnMBR initially revealed that N-Hexanoyl-dl-homoserine lactone (C6-HSL), N-Octanoyl-dl-homoserine lactone (C8-HSL) and N-Decanoyl-dl-homoserine lactone (C10-HSL) were the dominant AHLs in AnMBRs in this study. Three FQQs, namely, FQQ-C6, FQQ-C8 and FQQ-C10, were harvested after anaerobic screening of aerobic QQ consortiums (AeQQs) which were isolated by enrichment culture, aiming to degrade C6-HSL, C8-HSL and C10-HSL, respectively. Growth of FQQ-C6 and FQQ-C10 using AHLs as carbon source under anaerobic condition was significantly faster than those using acetate, congruously suggesting that their QQ performance will not be compromised in AnMBRs. All FQQs degraded a wide range of AHLs pinpointing their extensive QQ ability. FQQ-C6, FQQ-C8 and FQQ-C10 remarkably alleviated extracellular polymeric substances (EPS) production in a lab-scale AnMBR by 72.46%, 35.89% and 65.88%, respectively, and FQQ-C6 retarded membrane fouling of the AnMBR by 2 times. Bioinformatics analysis indicated that there was a major shift in dominant species from AeQQs to FQQs where Comamonas sp., Klebsiella sp., Stenotrophomonas sp. and Ochrobactrum sp. survived after anaerobic screening and were the majority in FQQs. High growth rate utilizing AHLs under anaerobic condition and enormous EPS retardation efficiency in FQQ-C6 and FQQ-C10 could be attributed to Comamonas sp.. These findings demonstrated that FQQs could be leveraged for QQ under anaerobic systems. We believe that this was the first work proposing a bacterial pool of facultative QQ candidates holding biotechnological promises for membrane fouling control in AnMBRs.

Town-scale microbial sewer community and H2S emissions response to common chemical and biological dosing treatments

Controlling hydrogen sulfide (H₂S) odors and emissions using a single, effective treatment across a town-scale sewer network is a challenge faced by many water utilities. Implementation of a sewer diversion provided the opportunity to compare the effectiveness of magnesium hydroxide (Mg(OH)₂) and two biological dosing compounds (Bioproducts A and B), with different modes of action (MOA), in a field-test across a large sewer network. Mg(OH)₂ increases sewer pH allowing suppression of H₂S release into the sewer environment while Bioproduct A acts to disrupt microbial communication through quorum sensing (QS), reducing biofilm integrity. Bioproduct B reduces H₂S odors by scouring the sewer of fats, oils and grease (FOGs), which provide adhesion points for the microbial biofilm. Results revealed that only Mg(OH)₂ altered the microbial community structure and reduced H₂S emissions in a live sewer system, whilst Bioproducts A and B did not reduce H₂S emissions or have an observable effect on the composition of the microbial community at the dosed site. Study results recommend in situ testing of dosing treatments before implementation across an operational system.

Effects of Quorum Quenching on Biofilm Metacommunity in a Membrane Bioreactor

Quorum quenching (QQ) has received attention for the control of biofilms, e.g., biofilms that cause biofouling in membrane bioreactors (MBRs). Despite the efficacy of QQ on biofouling, it is elusive how QQ influences biofilm formation on membranes. A pilot-scale QQ-MBR and non-QQ-MBR were identically operated for 4 days and 8 days to destructively sample the membranes. QQ prolonged the membrane filterability by 43% with no harmful influence on MBR performance. qPCR showed no effect of QQ on microbial density during either of these time periods. Community comparisons revealed that QQ influenced the bacterial and fungal community structures, and the fungal structure corresponded with the bacterial structure. Metacommunity and spatial analyses showed that QQ induced structural variation rather than compositional variation of bacteria and fungi. Moreover, QQ considerably enhanced the bacterial dispersal across membrane during the early development. As the dispersal enhancement by QQ counteracted the ecological drift, it eliminated the distance-decay relationship, reflecting a neutral theory archetype of metacommunity. Network analyses showed that QQ substantially reduced the amount and magnitude of interactions, e.g., competition and cooperation, for bacteria and fungi, and weakened their network structures, irrespective of time. Additionally, QQ suppressed the growth of specific microbial species (e.g., Acinetobacter), abundant and widespread at the early stage. These findings suggest that QQ influenced the community dynamics at the regional and local levels, correspondingly the ecological selection and dispersal processes, during the biofilm development.

A review on the applications of ultrasonic technology in membrane bioreactors

Membrane bioreactors (MBRs) have received increasing attention in the field of wastewater treatment in recent years. However, membrane fouling is the main problem of MBRs, limiting their widespread and large applications. Membrane cleaning methods can be mainly classified into four types including chemical, physical, physico-chemical and biological clean the fouled membrane. In recent years, ultrasonication has been reported as a promising cleaning technique for the membranes fouled in MBRs. Ultrasonic irradiation can clean the fouled membrane by creating important physical phenomena including microjets, microstreams and shock waves. Moreover, the ultrasonic method can be combined with other cleaning methods e.g. chemical cleaning and backwashing in order to improve the cleaning efficiency. It should be noted that the application of ultrasonic in the MBR system is not limited to the cleaning of membrane. The pretreatment of the wastewater by ultrasonic irradiation or ultrasound coupled with other methods, e.g. ozonation, prior to MBR system, can decrease the organic loading of the wastewater and subsequently postpone the fouling of the membrane. This paper critically reviews the recent advances in the applications of ultrasound in MBR systems. Emerging issues associated with application of on-line ultrasound and also hybrid on-line ultrasound for controlling the membrane fouling in MBR systems are critically reviewed. Moreover, application of the ultrasound in ex-situ form for cleaning the fouled membranes and pretreatment of wastewater prior to the MBR system is discussed.

Analysis of organic foulants in the coagulation-microfiltration process for the treatment of Taihu Lake

This paper analysed organic foulants in the coagulation-microfiltration process for Taihu Lake treatment. High-performance size-exclusion chromatography (HPSEC) and fluorescence excitation-emission matrices (EEM) were applied to elucidate the influence of characteristics of organics on microfiltration (MF) membrane fouling. Results showed that coagulation pretreatment could extend the operation duration of MF based on the fact that pretreatment could effectively remove macromolecular substances as well as a portion of small molecular weight (MW) organics. The analysis of foulants indicated that organics of strong hydrophobic acids (SHA) and neutral hydrophilic (Neut) fractions (based on hydrophobicity) and medium and small MW components (based on MW distribution) contributed greatly to irreversible fouling. EEM fluorescence analysis of chemical solutions exhibited that aromatic proteins and soluble microbial products were mainly a response to irreversible fouling.

Biofouling effects on the performance of microbial fuel cells and recent advances in biotechnological and chemical strategies for mitigation

The occurrence of biofouling in MFC can cause severe problems such as hindering proton transfer and increasing the ohmic and charge transfer resistance of cathodes, which results in a rapid decline in performance of MFC. This is one of the main reasons why scaling-up of MFCs has not yet been successfully accomplished. The present review article is a wide-ranging attempt to provide insights to the biofouling mechanisms on surfaces of MFC, mainly on proton exchange membranes and cathodes, and their effects on performance of MFC based on theoretical and practical evidence. Various biofouling mitigation techniques for membranes are discussed, including preparation of antifouling composite membranes, modification of the physical and chemical properties of existing membranes, and coating with antifouling agents. For cathodes of MFC, use of Ag nanoparticles, Ag-based composite nanoparticles, and antifouling chemicals is outlined in considerable detail. Finally, prospective techniques for mitigation of biofouling are discussed, which have not been given much previous attention in the field of MFC research. This article will help to enhance understanding of the severity of biofouling issues in MFCs and provides up-to-date solutions. It will be beneficial for scientific communities for further strengthening MFC research and will also help in progressing this cutting-edge technology to scale-up, using the most efficient methods as described here.

Characterization of the Fouling Layer on the Membrane Surface in a Membrane Bioreactor: Evolution of the Foulants' Composition and Aggregation Ability

In this study, the characteristics of membrane foulants were analyzed with regard to morphology, composition, and aggregation ability during the three stages of transmembrane pressure (TMP) development (fast-slow-fast rise in TMP) in a steady operational membrane bioreactor (MBR). The results obtained show that the fouling layer at the slow TMP-increase stage possessed a higher average roughness (71.27 nm) and increased fractal dimension (2.33), which resulted in a low membrane fouling rate (0.87 kPa/d). A higher extracellular DNA (eDNA) proportion (26.12%) in the extracellular polymeric substances (EPS) resulted in both higher zeta potential (-23.3 mV) and higher hydrophobicity (82.3%) for initial foulants, which induced and increased the protein proportion in the subsequent fouling layer (74.11%). Furthermore, the main composition of the EPS shifted from protein toward polysaccharide dominance in the final fouling layer. The aggregation test confirmed that eDNA was essential for foulant aggregation in the initial fouling layer, whereas ion interaction significantly affected foulant aggregation in the final fouling layer.

Anaerobic membrane bioreactors for wastewater treatment: Novel configurations, fouling control and energy considerations

Water shortage, public health and environmental protection are key motives to treat wastewater. The widespread adoption of wastewater as a resource depends upon development of an energy-efficient technology. Anaerobic membrane bioreactor (AnMBR) technology has gained increasing popularity due to their ability to offset the disadvantages of conventional treatment technologies. However there are several hurdles, yet to climb over, for wider spread and scale-up of the technology. This paper reviews fundamental aspects of anaerobic digestion of wastewater, and identifies the challenges and opportunities to the further development of AnMBRs. Membrane fouling and its implications are discussed, and strategies to control membrane fouling are proposed. Novel AnMBR configurations are discussed as an integrated approach to overcome technology limitations. Energy demand and recovery in AnMBRs is analyzed. Finally key issues that require urgent attention to facilitate global penetration of AnMBR technology are highlighted.

Membrane layers intensifying quorum quenching alginate cores and its potential for membrane biofouling control

Quorum quenching (QQ) has been proved to be an efficient method to mitigate biofouling in membrane bioreactors (MBRs). In this paper, in order to enhance practicability of QQ microcapsules, we prepared three types microcapsules with same alginate cores (SAs). The microcapsules with polyacrylonitrile (PAN) layer showed excellent performance in preventing cell leakage from the microcapsules, increasing service life and improving mechanical strength. And confocal laser scanning microscopy images demonstrated that there were very little dead bacteria in the microcapsules with both chitosan and PAN layer than microcapsules with only PAN layer because chitosan layer can protect bacteria entrapped in cores from the hurt caused by poisonous PAN solution. At the same time, the microcapsules with PAN layer presented more efficient anti-biofouling ability in the physical washing test. At last, the bacterial microcapsules coated with both chitosan and PAN layer showed an obvious biofouling mitigation during the MBRs operation.

The oceans are changing: impact of ocean warming and acidification on biofouling communities

Climate change (CC) is driving modification of the chemical and physical properties of estuaries and oceans with profound consequences for species and ecosystems. Numerous studies investigate CC effects from species to ecosystem levels, but little is known of the impacts on biofilm communities and on bioactive molecules such as cues, adhesives and enzymes. CC is induced by anthropogenic activity increasing greenhouse emissions leading to rises in air and water temperatures, ocean acidification, sea level rise and changes in ocean gyres and rainfall patterns. These environmental changes are resulting in alterations within marine communities and changes in species ranges and composition. This review provides insights and synthesis of knowledge about the effect of elevated temperature and ocean acidification on microfouling communities and bioactive molecules. The existing studies suggest that CC will impact production of bioactive compounds as well as the growth and composition of biofouling communities. Undoubtedly, with CC fouling management will became an even greater challenge.

Effect of metabolic uncoupler, 2,4‑dinitrophenol (DNP) on sludge properties and fouling potential in ultrafiltration membrane process

Energy uncoupling technology was applied to the membrane process to control the problem of bio-fouling. Different dosages of uncoupler (2,4‑dinitrophenol, DNP) were added to the activated sludge, and a short-term ultrafiltration test was systematically investigated for analyzing membrane fouling potential and underlying mechanisms. Ultrafiltration membrane was used and made of polyether-sulfone with a molecular weight cut off (MWCO) of 150 kDa. Results indicated that low DNP concentration (15-30 mg/g VSS) aggravated membrane fouling because more soluble microbial products were released and then rejected by the membrane, which significantly increased cake layer resistance compared with the control. Conversely, a high dosage of DNP (45 mg/g VSS) retarded membrane fouling owing to the high inhibition of extracellular polymeric substances (proteins and polysaccharides) of the sludge, which effectively prevented the formation of cake layer on the membrane surface. Furthermore, analyses of fouling model revealed that a high dosage of DNP delayed the fouling model from pore blocking transition to cake filtration, whereas this transition process was accelerated in the low dosage scenario.

Membrane Fouling Potentials of an Exoelectrogenic Fouling-Causing Bacterium Cultured With Different External Electron Acceptors

Integrated microbial fuel cell (MFC) and membrane bioreactor (MBR) systems are a promising cost-effective and energy-saving technology for wastewater treatment. Membrane fouling is still an important issue of such integrated systems in which aeration (oxygen) is replaced with anode electrodes (anodic respiration). Here, we investigated the effect of culture conditions on the membrane fouling potential of fouling-causing bacteria (FCB). In the present study, Klebsiella quasipneumoniae strain S05, which is an exoelectrogenic FCB isolated from a MBR treating municipal wastewater, was cultured with different external electron acceptors (oxygen, nitrate, and solid-state anode electrode). As results, the fouling potential of S05 was lowest when cultured with anode electrode and highest without any external electron acceptor (p < 0.05, respectively). The composition of soluble microbial products (SMP) and extracellular polymeric substances (EPS) was also dependent on the type of electron acceptor. Protein and biopolymer contents in SMP were highly correlated with the fouling potential (R² = 0.73 and 0.81, respectively). Both the fouling potential and yield of protein and biopolymer production were significantly mitigated by supplying electron acceptors sufficiently regardless of its types. Taken together, the aeration of MBR could be replaced with solid-state anode electrodes without enhancement of membrane fouling, and the anode electrodes must be placed sufficiently to prevent the dead spaces in the integrated reactor.

Effect of membrane property and feed water organic matter quality on long-term performance of the gravity-driven membrane filtration process

This study investigated the influence of membrane property and feed water organic matter quality on the permeate flux and water quality during gravity-driven membrane (GDM) filtration. GDM filtration was continuously carried out over 500 days at hydrostatic pressure of 65 mbar in dead-end mode without any back-flushing or membrane cleaning. Three ultrafiltration (UF) membranes (PES-100 kDa, PVDF-120 kDa, and PVDF-100 kDa) and one microfiltration (MF) membrane (PTFE-0.3 μm) were tested for treating lake water with varied organic matter qualities due to algal growth. The fluxes of the four membranes rapidly decreased to ~8 L/(m² × h) within a week of GDM filtration. The flux variations were quite similar for the four membranes during the entire GDM filtration, indicating that membrane property has a little effect on the flux. The flux strongly depends on the feed water organic matter quality. The average flux in treating low organics containing water (7-60 days) was ~5 L/(m² × h) and decreased to ~2 L/(m² × h) in treating high organics containing water (60-300 days). The accumulation of algal-derived biopolymers was mainly responsible for the flux decline by forming biofilms with high permeation resistance. The average flux in 300-500 days increased to ~3.5 L/(m² × h) when the feed water contained lower levels of biopolymers and higher levels of easily biodegradable organics, which created open and heterogeneous biofilms with lower permeation resistance. Removal efficiency for Escherichia coli was more than 5 log, while the removal efficiency for total bacterial cells was 1 log-2 log for the four membranes, indicating some bacterial regrowth after the filtration. Removal efficiency for the MS2 phage was 2.4 log and 1.5 log for the fouled PES-UF and PTFE-MF membranes.

Biofouling in ultrafiltration process for drinking water treatment and its control by chlorinated-water and pure water backwashing

We investigated biofouling in ultrafiltration (UF) for drinking water treatment and its control by backwashing with chlorinated-water or pure water. By using sodium azide to suppress biological growth, the relative contribution of biofouling to total fouling was estimated, and its value (5.3-56.0%) varied with the feed water, and increased with the increases of filtration time and membrane flux. The biofouling layer could partially remove biodegradable organic matter and ammonia (32.9-74.2%). Backwashing using chlorinated-water partly inactivated the microorganisms (23.8%) but increased the content of extracellular polymeric substances (7.7%) in the biofouling layer. In contrast, backwashing using pure water led to a looser and more porous fouling layer according to optical coherence tomography observation. Consequently, the latter was more effective in reducing fouling resistance (33.41% reduction) compared to backwashing by chlorinated-water (8.6%). These findings reveal the critical roles of biofouling in pollutants removal in addition to membrane permeability, which has important implications for addressing seasonal ammonia pollution.

Membrane fouling mitigation by NaClO-assisted backwash in anaerobic ceramic membrane bioreactors for the treatment of domestic wastewater

In this study, the NaClO-assisted backwash was used to mitigate membrane fouling in anaerobic ceramic membrane bioreactors (AnCMBRs) treating domestic wastewater. Four NaClO concentrations (C_backwash) - 0.05, 0.25, 1 and 10 mg/L were used for backwash. In general, the effectiveness of NaClO-assisted backwash is the balance of two forces - foulants removal from membranes (i.e., the direct effect) and modification of mixed liquor (i.e., the indirect effect). With increased C_backwash, the direct effect of NaClO was enhanced through removal of more proteins. The indirect effect of NaClO was more complicated. The biodegradability of organics in the wastewater and the microbial activities of biomass were improved with low C_backwash. However, high C_backwash deteriorated cell metabolism and led to excessive production of cell lytic products. Optimal C_backwash that was used in this study - the C_backwash that provided the best fouling mitigation and acceptable treatment performances - was 1 mg/L.

Evaluation of a novel quorum quenching strain for MBR biofouling mitigation

Membrane biofouling, due to Soluble Microbial Products (SMP) and Extracellular Polymeric Substances (EPS) deposition, results in reduction of the performance of Membrane Bioreactors (MBRs). However, recently, a new method of biofouling control has been developed, utilizing the interference of the bacterial inter- and intra-species' communication. Bacteria use Quorum Sensing (QS) to regulate the production of SMP and EPS. Therefore, disruption of Quorum Sensing (Quorum Quenching: QQ), by enzymes or microorganisms, may be a simple mean to control membrane biofouling. In the present study, a novel QQ-bacterium, namely Lactobacillus sp. SBR04MA, was isolated from municipal wastewater sludge and its ability to mitigate biofouling was evaluated by monitoring the changes in critical flux and transmembrane pressure, along with the production of EPS and SMP, in a lab-scale MBR system treating synthetic wastewater. Lactobacillus sp. SBR04MA showed great potential for biofouling control, which was evidenced by the ∼3-fold increase in critical flux (8.3 → 24.25 L/m²/h), as well as by reduction of the SMP and EPS production, which was lower during the QQ-period when compared against the control period. Furthermore, the addition of the QQ-strain did not affect the COD removal rate. Results suggested that Lactobacillus sp. SBR04MA represents a novel and promising strain for biofouling mitigation and enhancement of MBRs performance.

Intercepting signalling mechanism to control environmental biofouling

Biofouling in environmental systems employs bacterial quorum sensing signals (autoinducers) and extracellular polymeric substances to onset the event. The present review has highlighted on the fundamental mechanisms behind biofilm formation over broad spectrum environmental niches especially membrane biofouling in water systems and consequent chances of pathogenic contamination leading to global economic loss. It has broadly discussed on bioelectrical signal (via, potassium gradient) and molecular signal (via, AHLs) mediated quorum sensing which help to propagate biofilm formation. The review has illustrated the potential of genomic intervention towards biofouled membrane microbial community and has uncovered possible features of biofilm microenvironment like quorum quenching bacteria, bioelectrical waves capture, siderophores arrest and surface modifications. Based on information, the concept of interception of quorum signals (AHLs) and bioelectrical signals (K⁺) by employing electro-modified (negative charges) membrane surface have been hypothesized in the present review to favour anti-biofouling.