Characterization and adsorption properties of a lanthanum-loaded magnetic cationic hydrogel composite for fluoride removal

Amidation modified hollow composite microspheres as a self-floating adsorbent for efficient capture of anionic dye DB86 and heavy metal nickel (II)

The co-contamination of dyes and heavy metal ions often used as mordants poses potential risks to environment and public health, and is a challenging problem that needs to be solved in water treatment. Meanwhile, improving the solid-liquid separation capability of adsorbents is of great significance for the application of adsorption technology. Herein, amidation modified hollow composite microspheres were prepared using hollow glass microsphere (HGM) as matrix through hydrolysis and condensation of silane coupling agent (A-1100) and subsequent amidation reaction. The material (HGMNE) not only exhibited good adsorption performance for DB86 and Ni2+ but also had stable self-floating capability. The adsorption of DB86 by HGMNE is mainly carried out by the electrostatic interaction between positively charged quaternary amine nitrogen and negatively charged DB86, while the adsorption of Ni2+ is achieved by the carboxyl group in EDTA group through complexation interaction to adsorb Ni2+ to form Ni complex. This research not only is devoted to the utilization of HGMNE to achieve the co-removal of DB86 and Ni2+ and flexible self-floating solid-liquid separation but also verifies the feasibility and applicability of the modification method of introducing organic adsorption functional groups through amidation reaction, so as to expand the preparation path of HGM-based adsorbents.

Highly efficient recovery of phosphate and fluoride from phosphogypsum leachate: Selective precipitation and adsorption

Phosphogypsum, a typical by-product in the phosphorus chemical industry, could generate a large amount of leachate containing phosphate and fluoride in the process of rainfall and long-term stacking, which not only causes serious environmental pollution, but also leads to a waste of resources. In this study, a united treatment of calcium hydroxide precipitation and lanthanum zeolite (La-ZFA) adsorption was proposed to achieve the recovery of phosphate and fluoride from phosphogypsum leachate. In phosphogypsum, most phosphorus could be leached except P in the residual occurrence form, while for fluoride, only water-soluble F could be effectively leached. The optimum leaching amounts of phosphate and fluoride were 22.59 and 4.64 mg/g, respectively, at liquid-solid ratio of 400:1, leaching time of 120 min, pH of 6.0, particle size of >200 mesh (<0.075 mm), and leaching temperature of 25°C. Using Ca(OH)2 as the precipitant, the phosphate could be precipitated selectively from phosphogypsum leachate by controlling pH and time, and the concentrations of it decreased significantly to 0.29 mg/L at pH 10.0, with a removal efficiency of 99.48%. XRD, SEM and Visual MINTEQ software analysis proved that the main component of the precipitate was hydroxyapatite (Ca5(PO4)3(OH)). After P precipitation, a series of sorbents for fluoride were investigated, and La-ZFA sorbent was chosen and utilized to recover the fluoride from the leachate through a cyclic fixed-bed column. The efficiency of La-ZFA was basically not affected by the high concentration sulfate, and it can selectively adsorb fluoride from phosphogypsum leachate, leading to a final fluoride concentration of 0.29 mg/L in the effluent. The characterization demonstrated that fluoride might be adsorbed onto the La-ZFA via ligand exchange with hydroxy groups. The proposed method in this study is expected to sequentially recover phosphate and fluorine from the leachate of phosphogypsum, and it has great guiding significance for resource utilization and management of phosphogypsum.

Efficient removal of cationic dyes using lemon peel-chitosan hydrogel composite: RSM-CCD optimization and adsorption studies

The most prominent and easily identifiable factor of water purity is its colour, which may be both physically undesirable, and act as an alert towards potential environmental contamination. The current study describes the optimum synthesis technique for Lemon Peel-Chitosan hydrogel using the Response Surface Methodology integrated Central composite Design (RSM-CCD). This adsorbent is both environmentally friendly and cost-effective. The hydrogel exhibited a maximal dye removal capacity of 24.984, 24.788, 24.862, 23.483, 24.409, and 24.726 mg g-1, for 10 mg L-1 aqueous medium of Safranin O, Methylene blue, Basic fuchsin, Toluidine blue, Brilliant green and Crystal violet, respectively. The adsorption kinetics and isotherm data suggest that the Pseudo second-order kinetic and Freundlich adsorption isotherm models precisely represent the respective behaviour of all the dyes. The thermodynamic viability of the process is determined by the values of ΔG, ΔH, and ΔS. The probable mechanism of adsorption was the electrostatic interaction between the dye molecules and the hydrogel. The regenerated hydrogel had removal efficiencies of over 80 % even after enduring six cycles. Hence, the exceptional recyclability and utility of the adsorbent show their sustainability for wastewater treatment in textile factories.

Monolayer Adsorption of Ciprofloxacin on Magnetic Inulin/Mg-Zn-Al Layered Double Hydroxide: Advanced Interpretation of the Adsorption Process

In this study, magnetic inulin/Mg-Zn-Al layered double hydroxide (MILDH) was synthesized for the adsorption of ciprofloxacin. The application of various analytical techniques confirmed the successful formation of MILDH. For the optimization of controllable factors, Taguchi design was applied and optimum values were obtained as equilibrium time─100 min, adsorbent dose─20 mg, and ciprofloxacin concentration─30 mg/L. The highest capacity of the material was recorded as 196.19 mg/g at 298 K. Langmuir model (R2 = 0.9669-0.9832) fitted best as compared to the Freundlich model (R2 = 0.9588-0.9657), concluded the monolayer adsorption of ciprofloxacin on MILDH. Statistical physics model M 2 was found to fit best to measured data (R2 = 0.9982-0.9989), indicating that the binding of ciprofloxacin took place on two types of receptor sites (n1 and n2). The multidocking mechanism with horizontal position was suggested on the first receptor site (n1 < 1), while multimolecular adsorption of ciprofloxacin lying vertically on the second receptor site (n2 > 1) at all temperatures. The adsorption energies (E1 = 22.79-27.20 kJ/mol; E2 = 18.00-19.46 kJ/mol) illustrated that the adsorption of ciprofloxacin onto MILDH occurred through physical forces. Best fitting of the fractal-like pseudo-first-order kinetic model (R2 = 0.9982-0.9992) indicated that the adsorption of ciprofloxacin happened on the MILDH surface having different energies. X-ray photoelectron spectroscopy analysis further confirmed the adsorption mechanism of ciprofloxacin onto MILDH.

Experimental study on the treatment of AMD by SRB immobilized particles containing "active iron" system

The inhibition and toxicity of high acidity and heavy metals on sulfate-reducing bacteria in acid mine drainage (AMD) were targeted. Highly active SRB immobilized particles were prepared using SRB, warm sticker wastes (iron powders), corncobs, and Maifan stones as the main matrix materials, employing microbial immobilization technology. The repair ability and reusability of highly active immobilized particles for AMD were explored. The results indicate that the adaptability of immobilized particles to AMD varied under different initial conditions, such as pH, Mn2+, and SO42-. The adsorption process of immobilized particles on Mn2+ follows the quasi-second-order kinetic model, suggesting that it involves both physical and chemical adsorption. The maximum adsorption capacity of immobilized particles for Mn2+ is 3.878 mg/g at a concentration of 2.0 mg/L and pH 6. On the other hand, the reduction process of immobilized particles on SO42- adheres to the first-order reaction kinetics, indicating that the reduction of SO42- is primarily driven by the dissimilation reduction of SRB. The maximum reduction rate of SO42- by immobilized particles is 94.23% at a concentration of 800 mg/L and pH 6. A layered structure with a flocculent appearance formed on the surface of the immobilized particles. The structure's characteristics were found to be consistent with sulfate green rust (FeII4FeIII2(OH)12SO4·8H2O). The chemisorption, ion exchange, dissimilation reduction, and surface complexation occurring between the matrices in the immobilized particles can enhance the alkalinity of AMD and decrease the concentration of heavy metals and sulfates. These results are expected to offer novel insights and materials for the treatment of AMD using biological immobilization technology, as well as improve our understanding of the mechanisms behind biological and abiotic enhanced synergistic decontamination.

New easily recycled carrier based polyurethane foam by loading Al-MOF and biochar for selective removal of fluoride ion from aqueous solutions

The production of Integrated circuits (ICs) generates wastewater with a high concentration of residual fluoride ions, necessitating highly efficient fluorine removal methods. In this study, a novel composite carrier was developed using a hydrothermal synthesis method to load Al-MOF and biochar (BC) onto polyurethane foam (PUF), resulting in the composite foam of Al-MOF-PUF@BC. The results showed that the composite carrier exhibited a stable fluoride removal effect, with a maximum adsorption capacity of 16.52 mg/g at room temperature. The adsorption isotherm curves were consistent with the Langmuir isotherm model, and the adsorption kinetics were well-described by the pseudo-first-order model. The mechanism of fluorine adsorption on Al-MOF-PUF@BC was ligand exchange with hydroxyl groups and the formation of FAl bonds. Density functional theory (DFT) calculations revealed that the adsorption energy reached -246.7 eV, indicating stable adsorption for fluoride ions. The composite foam demonstrated excellent regenerative properties and was effective for fluoride removal in actual IC wastewater.

Immobilization of Microcystin by the Hydrogel-Biochar Composite to Enhance Biodegradation during Drinking Water Treatment

Microcystin-LR (MC-LR), the most common algal toxin in freshwater, poses an escalating threat to safe drinking water. This study aims to develop an engineered biofiltration system for water treatment, employing a composite of poly(diallyldimethylammonium chloride)-biochar (PDDA-BC) as a filtration medium. The objective is to capture MC-LR selectively and quickly from water, enabling subsequent biodegradation of toxin by bacteria embedded on the composite. The results showed that PDDA-BC exhibited a high selectivity in adsorbing MC-LR, even in the presence of competing natural organic matter and anions. The adsorption kinetics of MC-LR was faster, and capacity was greater compared to traditional adsorbents, achieving a capture rate of 98% for MC-LR (200 μg/L) within minutes to tens of minutes. Notably, the efficient adsorption of MC-LR was also observed in natural lake waters, underscoring the substantial potential of PDDA-BC for immobilizing MC-LR during biofiltration. Density functional theory calculations revealed that the synergetic effects of electrostatic interaction and π-π stacking predominantly contribute to the adsorption selectivity of MC-LR. Furthermore, experimental results validated that the combination of PDDA-BC with MC-degrading bacteria offered a promising and effective approach to achieve a sustainable removal of MC-LR through an "adsorption-biodegradation" process.

A novel tri-metal adsorbent used for defluoridation technique from groundwater: performance and mechanism

In this research article, a novel adsorbent (Zn-Fe-Al) was synthesized successfully by a simple chemical route where three oxides combined to enhance affinity towards fluoride. The physicochemical properties of the adsorbent were used to characterize and assess its effectiveness in defluoridation with both synthetic and groundwater. The TEM results demonstrated the overlapping of metals, and EDX shows the metals present in the adsorbent. The maximum defluoridation efficiency (97%) of Zn-Fe-Al was obtained at an optimized initial pH 7 and adsorbent dose 0.08 g L-1. The fluoride adsorption on Zn-Fe-Al followed the D-R isotherm and intraparticle diffusion. The maximum adsorption capacity of Zn-Fe-Al was found to be 187 mg g-1. The adsorption of fluoride on Zn-Fe-Al was found to be endothermic and spontaneous. The Zn-Fe-Al adsorbent exhibited satisfactory defluoridation performance on real groundwater. The co-existing ions were also investigated. The adsorption mechanisms for fluoride were electrostatic interaction and ion exchange. These results demonstrated that Zn-Fe-Al adsorbent was considered high potential for effective defluoridation of groundwater.

Structure-performance correlation guided cerium-based metal-organic frameworks: Superior adsorbents for fluoride removal in water

Fluoride in the hydrosphere exceeds the standard, which could be critically hazardous to human health and the natural environment. The adsorption method is a mature and effective way to remove pollutants in water, including fluoride. In this study, we synthesized three kinds of cerium-based metal-organic frameworks (Ce-MOFs) with different structures and properties by modulating the organic ligands (i.e., trimesic acid (BTC), 1,2,4,5-benzenetetracarboxylic acid (PMA), and terephthalic acid (BDC)) via the solvothermal method. The adsorption kinetics of Ce-MOFs on fluoride well fit the pseudo second order model, and their adsorption isotherms also conform to Langmuir isothermal model. The thermodynamic study reveals that the adsorption process is a spontaneous endothermic reaction. The maximum saturated adsorption capacities of Ce-BTC, Ce-PMA, and Ce-BDC are 70.7, 159.6, and 139.5 mg g^-1, respectively. Ce-MOFs have stable and excellent adsorption capacity at pH = 3-9. Coexisting anions (Cl^-, SO₄^2-, and NO₃^-) do not affect the performance of Ce-MOFs for fluoride removal. Moreover, Ce-MOFs also show their broad prospect as superior fluoride adsorbents because of their excellent performance and reusability in real water samples. Organic ligands have a remarkable influence on the defluoridation performance of Ce-MOFs. This work will provide a feasible idea for designing MOFs as superiors adsorbents for defluoridation.

Template-Free Synthesis of Magnetic La-Mn-Fe Tri-Metal Oxide Nanofibers for Efficient Fluoride Remediation: Kinetics, Isotherms, Thermodynamics and Reusability

The occurrence of fluoride contamination in drinking water has gained substantial concern owing to its serious threat to human health. Traditional adsorbents have shortcomings such as low adsorption capacity and poor selectivity, so it is urgent to develop new adsorbents with high adsorption capacity, renewable and no secondary pollution. In this work, magnetic electrospun La-Mn-Fe tri-metal oxide nanofibers (LMF NFs) for fluoride recovery were developed via electrospinning and heat treatment, and its defluoridation property was evaluated in batch trials. Modern analytical tools (SEM, BET, XRD, FTIR) were adopted to characterize the properties of the optimized adsorbent, i.e., LMF11 NFs with a La:Mn molar ratio of 1:1. The surface area calculated via BET method and pH_pzc assessed using pH drift method of LMF11 NFs were 55.81 m² g^-1 and 6.47, respectively. The results indicated that the adsorption amount was highly dependent on the pH of the solution, and reached the highest value at pH = 3. The kinetic behavior of defluoridation on LMF11 NFs was dominated by the PSO model with the highest fitted determination coefficients of 0.9999. Compared with the other three isotherm models, the Langmuir model described defluoridation characteristics well with larger correlation coefficients of 0.9997, 0.9990, 0.9987 and 0.9976 at 15 °C, 25 °C, 35 °C and 45 °C, respectively. The optimized LMF11 NFs exhibited superior monolayer defluoridation capacities for 173.30-199.60 mg F^-/g at pH 3 at 15-45 °C according to the Langmuir isotherm model. A thermodynamic study proved that the defluoridation by LMF11 NFs is a spontaneous, endothermic along with entropy increase process. In addition, the LMF11 NFs still showed high defluoridation performance after three reused cycles. These findings unveil that the synthesized LMF11 NFs adsorbent is a good adsorbent for fluoride remediation from wastewater owing to its low cost, high defluoridation performance and easy operation.

Highly efficient P uptake by Fe3O4 loaded amorphous Zr-La (carbonate) oxides: Electrostatic attraction, inner-sphere complexation and oxygen vacancies acceleration effect

Bimetallic oxides composites have received an increasing attention as promising adsorbents for aqueous phosphate (P) removal in recent years. In this study, a novel magnetic composite MZLCO was prepared by hybridizing amorphous Zr-La (carbonate) oxides (ZLCO) with nano-Fe₃O₄ through a one-pot solvothermal method for efficient phosphate adsorption. Our optimum sample of MZLCO-45 exhibited a high Langmuir maximum adsorption capacity of 96.16 mg P/g and performed well even at low phosphate concentration. The phosphate adsorption kinetics by MZLCO-45 fitted well with the pseudo-second-order model, and the adsorption capacity could reach 79% of the ultimate value within the first 60 min. The phosphate adsorption process was highly pH-dependent, and MZLCO-45 performed well over a wide pH range of 2.0-8.0. Moreover, MZLCO-45 showed a strong selectivity to phosphate in the presence of competing ions (Cl^-, NO₃^-, SO₄^2-, HCO₃^-, Ca²⁺, and Mg²⁺) and a good reusability using the eluent of NaOH/NaCl mixture, then 64% adsorption capacity remained after ten recycles. The initial 2.0 mg P/L in municipal wastewater and surface water could be efficiently reduced to below 0.1mg P/L by 0.07 g/L MZLCO-45, and the phosphate removal efficiencies were 95.7% and 96.21%, respectively. Phosphate adsorption mechanisms by MZLCO-45 could be attributed to electrostatic attraction and the inner-sphere complexation via ligand exchange forming Zr/La-O-P, -OH and CO₃^2- groups on MZLCO-45 surface played important roles in the ligand exchange process. The existence of oxygen vacancies could accelerate the phosphate absorption rate of the MZLCO-45 composites.

Effectiveness of the engineered pinecone-derived biochar for the removal of fluoride from water

Drinking fluoride (F^-)-contaminated water (>1.5 mg L^-1) causes severe dental and skeletal disorders. In the central province of Pakistan, ∼20 times higher levels of F^- in the drinking groundwater (compared with the 1.5 mg L^-1 permissible limit of the World Health Organization) are triggering bone abnormalities in teenagers. In this study, we demonstrated the potential of pinecone-derived biochar (pristine) impregnated with Fe- and Al-salts (engineered) to defluoridate water. Batch mode adsorption experiments were carried out under variable conditions of solution pH, F^- initial concentration, adsorbent dose, and contact time. The engineered biochars resulted in greater adsorption than that of pristine biochar. Specifically, the AlCl₃-modified biochar exhibited a maximum adsorption capacity of 14.07 mg g^-1 in spiked water and 13.07 mg g^-1 in in-situ groundwater. The equilibrium isothermal and kinetic models predicted monolayer, cooperative, and chemisorption types of the adsorption process. The chemical interaction and outer-sphere complexation of F^- with Al, Na, and H elements were further confirmed by the post-adsorption analysis of the AlCl₃-modified biochar by FTIR and XRD. The AlCl₃-modified biochar resulted in 87.13% removal of F^- from the in-situ F^--contaminated groundwater, even in the presence of naturally occurring competing ions (such as Cl^-, HCO₃^-, SO₄^2-, and NO₃^-). We conclude that the AlCl₃-modified biochar derived from pinecone could be a promising cost-effective adsorbent for the defluoridation of water.

Preparation and characterization of wheat straw biochar loaded with aluminium/lanthanum hydroxides: a novel adsorbent for removing fluoride from drinking water

In this work, a novel adsorbent of aluminium/lanthanum loaded wheat straw biochar (Al-La-WSB), was prepared by using a facile approach and used for fluoride removal. The Al-La-WSB and its pristine wheat straw biochar (WSB) were characterized by scanning electronic microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray powder diffraction (XRD) methods. Batch adsorption experiments were carried out to investigate adsorbent performance, the highest removal rate was observed at pH 9, contact time of 7 h and Al-La-WSB dose of 1 g L^-1. Lagergren pseudo-second-order kinetics and Langmuir isotherm model fitted the experimental data well. The maximum fluoride adsorption capacity of Al-La-WSB at different experiment temperature of 298, 308 and 318 K, was 51.28 mg g^-1, 46.73 mg g^-1 and 50.25 mg g^-1, respectively, which was better than most reported adsorbents. The Al-La-WSB performed well over a considerable wide pH range of 3-10 and carried positive charge at pH < 4.8. The presence co-existing ions of SO₄^2-, HCO₃^-, Cl^- and NO₃^- had a minor impact on fluoride adsorption besides PO₄^3-. Regeneration experiment results showed that the Al-La-WSB had an excellent reusability. According to the adsorbent characterization and batch adsorption experiment, the adsorption of fluoride on the Al-La-WSB was primarily a chemisorption, involving electrostatic interactions and ion exchange, which nitrate ion and hydroxyl played a major role. The results suggested that the Al-La-WSB could be a great adsorbent for removing fluoride from drinking water.

Effective fluorine removal using mixed matrix membrane based on polysulfone: adsorption performance and diffusion behavior

Fluorine is one of the essential trace elements for human life activities, but excessive intake of fluoride poses a great risk to people's health. In this paper, a series of mixed matrix membrane (MMM)-based polysulfone for removing fluoride were prepared by phase inversion, and their properties, adsorption capacity, adsorption isotherms, adsorption kinetics of fluoride ions, and mechanism were all investigated. The results confirmed that the MMM contained a large number of hydroxyl and aluminum functional groups due to resin being added. The MMM exhibited the best fluorine ion adsorption capacity of 2.502 mg/g at a pH of 6 with the initial concentration of 6 mg/L. As well, adsorption kinetics of fluorine ion on MMM followed the pseudo-second-order model, while the adsorption behavior of fluorine ion on MMM was well simulated by the Langmuir isotherm model. The adsorption capacity of MMM remained stable after six cycles and the regeneration efficiency was still above 80%, resulting in a long-term stability adequate for fluorine ion removal. Complexation and ion exchange played a key role in the fluorine ion adsorption of MMM. These results indicated the MMM as novel type of absorbent had an excellent capacity for removing fluoride.

Fluoride remediation from on-site wastewater using optimized bauxite nanocomposite (Bx-Ce-La@500): Synthesis maximization, and mechanism of F─ removal

Bauxite is a widely available Al-O-rich mineral with great potential for abating fluoride. However, low adsorption capacity, a narrow workable pH range, and a lack of clarity on the best removal mechanism hinder its application. In this work, a highly efficient bauxite nanocomposite (Bx-Ce-La@500) was synthesized via doping and pyrolysis, and its fluoride adsorption in industrial wastewater was examined. Doping Ce/La synergistically improved the fluoride adsorption affinity of the composite (from pH_PZC 8.0 ~ 10.0) and enhanced the •OH. The materials were characterized by SEM-EDS, BET, XRD, and TGA while XPS, FTIR, and DFT were used to investigate the mechanism of fluoride sorption. Results show that Bx-Ce-La@ 500 has a positive zeta potential of 26.3-23.1 mV from pH 1~ 10. The Langmuir model was the best fit with a maximum adsorption capacity of 88.13 mg/g and removal efficiency up to 100% in 50 ppm F^- solution. The high F^- removal was attributed to the enhanced surface affinity and the formation of adequate •OH on the material. Except for carbonate and phosphate ions, other ions exhibited negligible effects and the selective removal of F^- in real wastewater was high. The main mechanism of adsorption was the ligand/ion exchange and electrostatic attraction.

Synergistic Fluoride Adsorption by Composite Adsorbents Synthesized From Different Types of Materials—A Review

The reduction of fluoride concentrations in water is one of many concerns. Adsorption is the most widely used technology for fluoride removal and the center to development of adsorption technology is the improvement of adsorbents. This review classifies the typical fluoride removal adsorbents into four types: metal oxides/hydroxides, biopolymers, carbon-based, and other adsorbents. The exploitation of new materials and the synthesis of composite materials are two ways of developing new adsorbents. In comparison to the discovery of novel adsorbents for fluoride adsorption, research into the composite synthesis of different types of conventional adsorbents has proliferated in recent years. The traditional adsorbents used the earliest, metal oxides, can act as active centers in a wide range of applications for modifying and compounding with other types of adsorbents. This study emphasizes reviewing the research on fluoride removal by composite adsorbents synthesized from different types of metal-modified materials. Seven factors were compared in terms of material characterization, initial fluoride concentration, adsorbent dose, pH, temperature, reaction time, and maximum adsorption capacity. The modification of composite adsorbents is facile and the synergistic effect of the different types of adsorbents significantly improves fluoride adsorption capacity. Metal composite adsorbents are synthesized by facile coprecipitation, hydrothermal, or impregnation modification methods. The adsorption mechanisms involve electrostatic attraction, ion exchange, complexation, and hydrogen bonding. The fluoride adsorption capacity of composite adsorbents has generally improved, indicating that most modifications are successful and have application prospects. However, to achieve significant breakthroughs in practical applications, numerous issues such as cost, separation/regeneration performance, and safety still need to be considered.

Adsorption of chlortetracycline in aquaculture wastewater by lanthanum modified multi-walled carbon nanotubes

The lanthanum modified multi-walled carbon nanotubes (La-CNTs) prepared by an impregnation method were investigated for the adsorption of chlortetracycline (CTC) in aquaculture wastewater. The adsorbents were characterized by SEM, EDS, XRD and BET. The effects of some factors including La-containing impregnant concentration, adsorbent dosage, CTC adsorbate concentration, adsorption time, pH of the adsorbate solution and additional ions on the CTC adsorption by La-CNTs were investigated in detail, and the optimal adsorption conditions were determined. The adsorption kinetics obeyed the quasi-second-order kinetic model. The adsorption isotherms obeyed the Langmuir model and the fitted maximum capacity of La-CNTs for CTC adsorption was 55.3 mg/g.

Efficient Fluoride Removal by a Fixed-Bed Column of Self-Assembled Zr(IV)-, Fe(III)-, Cu(II)-Complexed Polyvinyl Alcohol Hydrogel Beads

Fixed-bed column adsorption studies are performed with metal-complexed polyvinyl alcohol (PVA) hydrogel beads to remove fluoride from groundwater. The fixed-bed column (bed height = 8 ± 0.2 cm) of copper-zirconium-PVA (PCZH), zirconium-PVA (PZH), and iron-zirconium-PVA (PFZH) hydrogel beads have equilibrium fluoride removal capacities of 17.26 ± 0.05, 31.67 ± 0.05, and 11.84 ± 0.05 mg g^-1 from a 10 ± 0.20 mg L^-1 fluoride solution of pH 6.5 maintained at a flow rate of 1 ± 0.01 mL min^-1. The breakthrough curves for fluoride adsorption are analyzed by non-linear empirical models of Thomas, Bohart-Adams, Yoon-Nelson, and semi-empirical bed depth service time models. The maximum fluoride adsorption capacities obtained from the Thomas model are 25.66 ± 0.05, 38.17 ± 0.05, and 13.75 ± 0.05 mg g^-1 for PCZH, PZH, and PFZH. Moreover, the column of PZH (bed height = 4 ± 0.2 cm) removes about 1.67 ± 0.05 mg g^-1 of fluoride from the alkaline groundwater sample with high total dissolved solids containing 2.84 ± 0.20 mg L^-1 fluoride maintained at a flow rate of 0.5 ± 0.01 mL min^-1. The fluoride removal efficiency decreases marginally (<1 ± 0.02%) in the presence of interfering ions such as chlorides, sulfates, phosphates, bicarbonates, and nitrates. Furthermore, the fixed-bed column (bed height = 4 ± 0.2 cm) of PCZH, PZH, and PFZH remove 7.40 ± 0.05, 14.85 ± 0.05, and 6.53 ± 0.05 mg g^-1 fluoride, respectively, even after the third regeneration cycle. Additionally, the hydrogel beads are effective in the removal of arsenate (≤90 ± 0.02%) and chromate ions (≤96 ± 0.02%) from 100 ± 0.20 mg L^-1 solution in batch adsorption studies. Therefore, the hydrogel beads could be used as potent filters for the removal of fluoride, chromate, and arsenate ions from water.

Steric hindrance effect on the excited-state proton transfer process: TDDFT study on the fluorescent sensing mechanism of a fluoride sensor

An understanding of the excited-state process and the sensing mechanism for specific anions can be helpful for the design and synthesis of fluorescent sensors in analytical chemistry and biotechnology. Here, we theoretically investigated the fluorescent response mechanism of a reported acylhydrazone-based fluorescent sensor (Soft Matter, 2019, 15, 6690) for fluoride recognition using the time-dependent density functional theory approach. At the M06/TZVP/SCM level, the vertical excitation energies, which were calculated based on the ground state and first singlet-state geometries of the sensor molecule, agreed well with the experimental ultraviolet-visible and fluorescence spectra. Therefore, the time-dependent density functional theory method was considered reasonable and effective. According to the frontier orbital analysis and an excited-state potential energy scan, we proposed an excited-state proton transfer mechanism for the sensor-fluorine complex, where the steric hindrance leads to a high potential barrier. The excited-state proton transfer process facilitates sensor molecule deprotonation, alleviates its steric hindrance effect and expands its conjugated system. As a result, the fluorescence emission band of the sensor molecule was red-shifted significantly with the addition of fluoride anion. Based on this fluorescence difference, the sensor could be used for fluoride anion identification. This work provides a strategy to study sensor-analyte interactions in the excited state and offers an approach to tune the fluorescence emission wavelength of sensor molecules in anionic environments.

Simply synthesized sodium alginate/zirconium hydrogel as adsorbent for phosphate adsorption from aqueous solution: Performance and mechanisms

The traditional zirconium hydrogel beads were synthesized by multi-step method, which was comparatively complex. In this study, a high phosphate removal efficient sodium alginate/zirconium (SA/Zr) hydrogel was synthesized by a simple method, with the phosphate adsorption performance and mechanism be explored. The results showed that the adsorption capacity of SA/Zr hydrogel to phosphate was greatly affected by pH. With the increase of initial pH (3-11), the adsorption capacity of SA/Zr for phosphate descended. The phosphate adsorption capacity of SA/Zr hydrogel exceeded 120 mg PO₄^3-/g at pH 2-7, while reaching the maximum adsorption capacity at pH 3 (256.79 mg PO₄^3-/g). The process of adsorption kinetics was well fitted by intraparticle diffusion model, indicating that there was chemical adsorption during the adsorption process. The Redlich-Peterson isotherm model can well accord with isotherm data. In addition, the material showed high selectivity to phosphate. Besides, combining X-ray photoelectron spectroscopy with Zeta potential results suggested that when the pH value was less than 4.19, SA/Zr hydrogel adsorbed phosphate by electrostatic attraction and hydrogen bonding while the adsorption was made mainly through ligand exchange when pH value was higher than 4.19.

Enhanced removal of phosphate using pomegranate peel-modified nickel‑lanthanum hydroxide

In this work, a bimetallic Ni/La nanoparticle-laded biosorbent was fabricated from pomegranate fibers by solvothermal synthesis method. The material exhibited a high-efficient phosphate removal capability. The results of the characterization analysis showed that the surface of pomegranate fibers was rough and evenly coated with Ni and La after modification, and the specific surface area of Ni-La@Peel increased to 50.20 m²/g, providing a large number of adsorption sites for phosphate removal. The maximum phosphate removal rate of adsorbent was higher than 97% in a wide pH range (3.7-10.8). The maximum adsorption capacities of Ni-La@Peel were 226.55 mg-P/g and 220.31 mg-P/g under alkaline and acidic conditions, respectively, as calculated using the Langmuir model. Meanwhile, all the results were consistent with the Langmuir isothermal (R² = 0.99) and kinetic pseudo-second order models (R² = 0.99), indicating that the phosphate removal mechanism of Ni-La@Peel was mainly related to homogeneous chemisorption. Experimental results showed that in the presence of other anions, such as chloride, sulfate, nitrate, bromide and fluoride, the adsorption capacity of phosphate was only reduced by about 10% compared to the blank sample individually. In addition, the phosphate removal efficiency of Ni-La@Peel remained 82.05% at 7th adsorption-desorption cycle. These findings show that Ni-La@Peel is a promising material for purification of phosphate-containing wastewater.

Protective Effect of Nanoparticles from Platycladi Cacumen Carbonisata on 2,4,6-Trinitrobenzene Sulfonic Acid (TNBS)-Induced Colitis in Rats

Aim: To evaluate the protective effects of Platycladi Cacumen Carbonisata-derived nanoparticles (PCC-NPs) against 2,4,6-trinitrobenzenesulfonic acid (TNBS)-induced ulcerative colitis (UC) in rats. Methods: This study developed and characterized novel PCC-NPs synthesized by a green and simple pyrolysis process using Platycladi Cacumen (PC) as the sole precursor. The UC model prepared with rectal instillation of TNBS was used to evaluate the potential efficacy of PCC-NPs, and the underlying mechanisms were preliminarily explored from the perspective of anti-inflammatory and antioxidative stress for the first time. Results: PCC-NPs exhibited low cytotoxicity, good dispersibility and copious surface functional groups. Nanoparticles with diameters ranging from 40-60 nm mainly manifested a therapeutic effect by downregulating tumour necrosis factor-α (TNF-α), interleukin-6 (IL-6) and upregulating interleukin-10 (IL-10). In addition, PCC-NPs relieved colon injury by inhibiting myeloperoxidase (MPO) activity, limiting the release of malondialdehyde (MDA) and increasing the activity of superoxide dismutase (SOD). Conclusion: Green synthetic PCC-NPs is a potential candidate as a complementary drug for intestinal inflammation of inflammatory bowel disease, and its regulatory mechanisms may be to balance the levels of pro-/anti-inflammatory cytokines and improve resistance to oxidative stress.

Effects and behaviors of Microcystis aeruginosa in defluorination by two Al-based coagulants, AlCl3 and Al13

The complexity of natural water made it difficult to remove fluoride. Based on the environmental problems found in the investigation, the fluoride removal research in the water containing algal cells was carried out. In this study, AlCl₃ and [AlO₄Al₁₂(OH)₂₄(H₂O)₁₂]⁷⁺ (Al₁₃) were used to remove fluoride. Additionally, the role of aluminum speciation in fluoride removal and the effect of Microcystis aeruginosa on the fluoride removal by different aluminum species coagulants were elucidated. The results showed that AlCl₃ mainly removed fluoride by physical interactions, surface adsorption and enmeshment. When algal cells were added to the system, the fluoride removal rate increased from 22.75 % to 72.99 % at a dosage of 40.0 mg/L. This was because algal cells greatly increased the distribution of Al(OH)₃ in the flocs. In particular, the specific surface area of the flocs containing algal cells reached 160.77 m²/g, which allowed more fluoride to be adsorbed. However, excessive Al³⁺ led to serious damage to algal cells and release of intracellular organic matter (IOM), worsening the effect of defluoridation. F^- and Al³⁺ formed AlF²⁺ and AlF₂⁺ via complexation in water. These compounds were not conducive to defluoridation. Al₁₃ removed fluorine mainly through ion exchange, substitution and hydrogen bonding. Algal cells had an inhibitory effect on defluorination, which was observed in the process of coagulation by different Al dosages. Al₁₃ achieved agglomeration of algal cells and generated small and dense flocs through charge neutralization and electrostatic patch mechanism. Once Al₁₃ combined with algal cells and algae organic matter (AOM), the reaction between Al₁₃ and fluoride would be weakened. Al₁₃ not only maintained the defluoridation performance, but also did not damage the integrity of algal cells, even at high dosages.

Synthesis and evaluation of Ca-doped ferrihydrite as a novel adsorbent for the efficient removal of fluoride

Ferric hydrate has been extensively applied for the removal of various types of pollutants from wastewater because of its low cost and high efficiency. However, its wide-scale application has been greatly restricted by high-dose and low-adsorption capacity. Therefore, a novel Ca-doped ferrihydrite adsorbent has been synthesized and used for the enhanced removal of fluoride from wastewater in the presence of other co-existing ions. At 5 mg/L initial fluoride concentration and pH 5, the removal efficiency of fluoride approached to 97.5% and remained stable. Similarly, with the increase of dose from 100 to 300 mg/L, the fluoride removal linearly increased to 98% and remained plateau at neutral pH. Also, the presence of co-existing ions such as NO₃^-, SO₄^2-, Cl^-, and natural organic matter has not significantly influenced the removal performance of the adsorbent. Fluoride removal best fit the pseudo-second-order reaction kinetics and Langmuir isotherm model. The prepared adsorbent exhibited a maximum adsorption capacity of 53.21 mg/g for fluoride uptake from water. The SEM-EDX confirmed the doping of Ca onto the ferrihydrite where the elemental peaks of Ca and Fe emerged at the energy value of about 3.6 Kev and 7.1 Kev respectively in EDX analysis. In addition, SEM results of Ca-doped ferrihydrite adsorbent illustrated that a large microplates type of products was acquired after synthesis. The regeneration results confirmed that adsorbent could retain their original adsorption capacity after five regeneration cycles. The current study suggested that Ca-doped ferrihydrite has the application potential for the enhanced adsorption of fluoride from the water phase.

Outstanding fluoride removal from aqueous solution by a La-based adsorbent†

A La-based adsorbent was prepared with La(NO₃)₃·6H₂O, 2-methylimidazole and DMF via amide-hydrolysis and used for fluoride decontamination from aqueous water. The obtained adsorbent was lanthanum methanoate (La(COOH)₃). The effects of pH value, initial F⁻ concentration and interfering ions on defluoridation properties of as-prepared La(COOH)₃ were assessed through batch adsorption tests. The adsorption kinetics, isotherm models and thermodynamics were employed to verify the order, nature and feasibility of La(COOH)₃ towards fluoride removal. The results imply that La(COOH)₃ is preferable for defluoridation over a wide pH range of 2 to 9 without interference. Simultaneously, the defluoridation process of La(HCOO)₃ accords to the pseudo-second order model and Langmuir isotherm, revealing chemical adsorption is the main control step. The maximum fluoride capture capacities of La(COOH)₃ at 30, 40 and 50 °C are 245.02, 260.40 and 268.99 mg g⁻¹, respectively. The mechanism for defluoridation by La(COOH)₃ was revealed by PXRD and XPS. To summarize, the as-synthesized La based adsorbent could serve as a promising adsorbent for defluoridation from complex fluoride-rich water.

A La-based adsorbent was prepared with La(NO₃)₃·6H₂O, 2-methylimidazole and DMF via amide-hydrolysis and used for fluoride decontamination from aqueous water.

Optimization of fluoride removal by Al doped ZnO nanoparticles using response surface methodology from groundwater

The current novel work presents the optimization of factors affecting defluoridation by Al doped ZnO nanoparticles using response surface methodology (RSM). Al doped ZnO nanoparticles were synthesized by the sol-gel method and validated by FTIR, XRD, TEM/EDS, TGA, BET, and particle size analysis. Moreover, a central composite design (CCD) was developed for the experimental study to know the interaction between Al doped ZnO adsorbent dosage, initial concentration of fluoride, and contact time on fluoride removal efficiency (response) and optimization of the process. Analysis of variance (ANOVA) was achieved to discover the importance of the individual and the effect of variables on the response. The model predicted that the response significantly correlated with the experimental response (R² = 0.97). Among the factors, the effect of adsorbent dose and contact time was considered to have more influence on the response than the concentration. The optimized process parameters by RSM presented the adsorbent dosage: 0.005 g, initial concentration of fluoride: 1.5 g/L, and contact time: 5 min, respectively. Kinetic, isotherm, and thermodynamic studies were also investigated. The co-existing ions were also studied. These results demonstrated that Al doped ZnO could be a promising adsorbent for effective defluoridation for water.

Insight into the ion exchange in the adsorptive removal of fluoride by doped polypyrrole from water

In this study, the polypyrrole (PPy) samples doped with Cl^- (PPy-Cl), SO₄^2- (PPy-SO4) and SO₄^2-+Cl^- (PPy-SO4+Cl) were synthesized by chemical polymerization for the adsorptive removal of fluoride ion from water. The structure and morphology of the as-prepared PPy samples were characterized by FT-IR, BET, SEM, XPS, and zeta potential. The adsorption experiments revealed that the PPy-Cl exhibited faster kinetics and higher adsorption capacity (13.98 mg/g), more than 4 times that of PPy-SO4 (3.08 mg/g) and PPy-SO4+Cl (3.17 mg/g). The kinetics of the adsorption followed the pseudo-second-order model and the adsorption isotherm data fitted well to the Langmuir model. FT-IR, EDX, and XPS tests for PPy samples before and after fluoride adsorption demonstrated that anion exchange between F^- and Cl^- or SO4^2- was the prior mechanism for fluoride ion removal from water. Cl^- was more favorable than SO₄^2- in the ion exchange with F^-. Meanwhile, the Cl^- or SO₄^2- exchanged with F^- was mainly bound to the active nitrogen that accounts for 6% of the total nitrogen in PPy molecular matrix. Further study of zeta potential and pH influence experiment demonstrated the electrostatic interaction is auxiliary interaction for the fluoride removal by doped PPy samples.

Electrical impedance spectroscopy as a potential tool to investigate the structure and size of aggregates during water and wastewater treatment

Microscopic structure and size are important metrics for estimating aggregates environmental behaviors during water and wastewater treatment. However, in-situ determination of these characteristics is still a challenge. Here, we drew inspiration from a block disassembly process to propose an electrical impedance spectroscopy (EIS) method and constructed a generalized framework to associate macroscale electrical properties with microscopic structure and size-related characteristics of aggregates of different hierarchies. Extracted via EIS, the proposed models were verified to be capable of describing the self-similarity of aggregates and capturing the fractal and size information. Further, the proposed models exhibited a wide range of applications, which agrees well with the data gathered from various activated sludges, other colloids, and microgels in water and wastewater treatment. Finally, the EIS method was achieved online monitoring of fractal dimension and floc size during a sludge pre-oxidation conditioning process, which was elected as an example to illustrate the potential online applications of this EIS method in real water and wastewater environment. The obtained on-line data were used to indicate the potential suitable oxidation time during sludge pre-oxidation conditioning. These observations may inspire new methods of quantifying the aggregate structure and promote intelligent and dynamic decision-making during water and wastewater treatment.

A novel carboxylated polyacrylonitrile nanofibrous membrane with high adsorption capacity for fluoride removal from water

To deal with the drinking water safety caused by fluoride, a novel carboxylated polyacrylonitrile nanofibrous membrane (C-PAN NFM) is designed and fabricated massively for the first time by adopting synchronously biaxial stretching and carboxylation. The C-PAN NFM is composed of the layered stack structure by cross-linked nanofibers. Due to its high specific surface area, excellent hydrophilicity, a large amount of carboxyl and amine groups, C-PAN NFM owns high fluoride adsorption capacity and outstanding selectivity. Both the carboxylation and acid treatment of C-PAN NFM improved the fluoride adsorption capacity remarkably. Specifically, C-PAN NFM shows excellent reusability without secondary pollution. The fluoride adsorption behavior of C-PAN NFM is dominated by chemical adsorption, and the adsorption mechanism is mainly driven by hydrogen bonding and ion exchange. The mass-produced C-PAN NFM is a novel polyacrylonitrile-based porous membrane that shows a great application potential for fluoride removal with good efficiency and recyclability.

Postsynthetic Modification of Metal-Organic Frameworks by Vapor-Phase Grafting

A vapor-phase grafting strategy is developed for the postsynthetic modification of metal-organic frameworks (MOFs). On the basis of the Schotten-Baumann reaction between acyl chloride (-COCl) and amino (-NH₂) groups and hydrolysis of -COCl, the carboxylated MOFs could be prepared through simple exposure in vaporized acyl chloride molecules and immersion in water. The modified MOFs have well-maintained crystalline structures and porosities and show substantially improved fluoride removal performance.

Removal of Fluorides from Aqueous Solutions Using Exhausted Coffee Grounds and Iron Sludge

Many countries are confronted with a striking problem of morbidity of fluorosis that appears because of an increased concentration of fluorides in drinking water. The objective of this study is to explore opportunities for removal of fluoride from aqueous solutions using cheap and easily accessible adsorbents, such as exhaustive coffee grounds and iron sludge and to establish the efficiency of fluoride removal. Twelve doses (1, 2, 3, 4, 5, 6, 10, 20, 30, 40, 50 and 60 g/L) of adsorbents were used and five durations of the sorption process (30, 60, 90, 120 and 150 min). The results showed that the most optimum dose of iron sludge for 3 mg/L of fluoride removal was 30 g/L and the contact time was 30 min, the efficiency of fluoride removal achieved 62.92%; the most optimum dose of exhausted coffee grounds was 60 g/L with the most optimum contact time of 60 min; at a dose of 50 g/L with contact time of 90 min, the efficiency of fluoride removal achieved 56.67%. Findings demonstrate that adsorbents have potential applicability in fluoride removal up to the permissible norms.

Enhanced fluoride adsorption from aqueous solution by zirconium (IV)-impregnated magnetic chitosan graphene oxide

In this study, zirconium (IV)-impregnated magnetic chitosan graphene oxide (Zr-MCGO) was synthesized for removing fluoride from aqueous solution in batch mode. Characterization approaches (pH_pzc, FTIR, SEM, XRD, VSM, Raman, BET, and XPS) proved the successful incorporation of Zr into the adsorbent. Zr-MCGO exhibited a relatively favorable and stable capacity of defluoridation at lower pH with a wide range of pH from 4.0 to 8.0, while there was slightly negative effect of ionic strength on adsorption. In addition, Elovich kinetic model and Koble-Corrigan isotherm model could describe the uptake of fluoride well. The adsorption capacity was 8.84 mg/g at 313 K and Zr-MCGO was easily separated from mixtures using external magnet. Based on the experiments and XPS, electrostatic force, ligand exchange, and Lewis acid-base interaction might be potential adsorption mechanisms. Pseudo-second-order model was more compatible with the desorption process by 0.01 mol/L NaHCO₃ solution. Therefore, Zr-MCGO was a promising candidate for defluoridation on wastewater pollution remediation.

Design and synthesis of amine grafted graphene oxide encapsulated chitosan hybrid beads for defluoridation of water

The promising adsorbent like graphene oxide (GO), chitosan (CS) and amine functionalized graphene oxide (AGO) decorated chitosan (CS) namely AGO@CS composite beads was efficiently prepared for defluoridation studies. The prepared AGO@CS composite beads possess enriched defluoridation capacity (DC) of 4650 mgF^- kg^-1. Batch method was used to optimize the maximum DC of AGO@CS composite beads. The physicochemical properties of AGO@CS composite beads were explored by numerous instrumental techniques viz., FTIR, Raman, XPS, SEM and TGA investigation. The experimental values of AGO@CS composite beads for fluoride removal at various temperature conditions were assessed with adsorption isotherms, kinetic and thermodynamic studies. The possible defluoridation mechanism of AGO@CS beads was mostly proposed that electrostatic attraction. The reusability and field investigation results of AGO@CS beads shows they are regenerable and applicable at field circumstances.

Defluoridationof drinking water by metal impregnated multi-layer green graphene fabricated from trees pruning waste

A novel adsorbent with excellent adsorptive properties for fluoride was prepared through a green and cheap synthesis route. Populus caspica pruning wastes, a cheap agri-waste material, were reduced to multi-layer green graphene (MLG) and then post-modified to aluminum/iron modified multi-layer green graphene (AMLG and IMLG). Batch experiments revealed the effect of pH (3-11), contact time (0.5-12 h), and initial fluoride concentration (5-40 mg/L). The conversion of raw material to MLG increased the specific surface area about 120 times (from 4 to 475 m²/g). Furthermore, a significant improvement in zero points of charge (pHzpc) was attained for IMLG (7.1) and AMLG (8) compared with pristine MLG (4.3). Fluoride showed superior affinity to AMLG and IMLG compared with MLG. Fluoride removal increased gradually by pH from 3 to 8 and then decreased sharply up to pH 11. The study of process dynamics demonstrated the monolayer fluoride adsorption onto AMLG and IMLG controlled by the chemisorptions. The highest predicted adsorption capacities based on the Langmuir model were 31.52, 47.01, and 53.76 mg/g for MLG, IMLG, and AMLG, respectively. Considering economic and technical feasibility presents AMLG and IMLG as a promising candidate against water contamination by elevated fluoride. Graphical abstract.

A Novel and Efficient Metal Oxide Fluoride Absorbent for Drinking Water Safety and Sustainable Development

Inefficient and non-environmentally friendly absorbent production can lead to much resource waste and go against low carbon and sustainable development. A novel and efficient Mg-Fe-Ce (MFC) complex metal oxide absorbent of fluoride ion (F−) removal was proposed for safe, environmentally friendly, and sustainable drinking water management. A series of optimization and preparation processes for the adsorbent and batch experiments (e.g., effects of solution pH, adsorption kinetics, adsorption isotherms, effects of coexisting anions, as well as surface properties tests) were carried out to analyze the characteristics of the adsorbent. The results indicated that optimum removal of F− occurred in a pH range of 4–5.5, and higher adsorption performances also happened under neutral pH conditions. The kinetic data under 10 and 50 mg·g−1 were found to be suitable for the pseudo-second-order adsorption rate model, and the two-site Langmuir model was ideal for adsorption isotherm data as compared to the one-site Langmuir model. According to the two-site Langmuir model, the maximum adsorption capacity calculated at pH 7.0 ± 0.2 was 204 mg·g−1. The adsorption of F− was not affected by the presence of sulfate (SO42−), nitrate (NO3−), and chloride (Cl−), which was suitable for practical applications in drinking water with high F− concentration. The MFC adsorbent has an amorphous structure, and there was an exchange reaction between OH− and F−. The novel MFC adsorbent was proven to have higher efficiency, better economy, and environmental sustainability, and be more environmentally friendly.

Lanthanum molybdate/magnetite for selective phosphate removal from wastewater: characterization, performance, and sorption mechanisms

Lanthanum molybdate/magnetite (M-La₂(MoO₄)₃) with various LaCl₃/Fe₃O₄ mass ratios was synthesized and optimized for selective phosphate removal from wastewater. M-La₂(MoO₄)₃ (2:1) was selected on the basis of phosphate sorption capacity for further experiments and characterized by a variety of methods. The phosphate sorption kinetics, isotherms, and matrix effect were studied. The maximum sorption capacity at initial pH 7 indicates the possible applicability M-La₂(MoO₄)₃ (2:1) in removing phosphate from the aquatic environment. Phosphate removal by M-La₂(MoO₄)₃ (2:1) with high selectivity was achieved in the presence of other co-existing anions, while calcium and magnesium ions were found to inhibit the sorption process. The sorption isotherm study showed that Freundlich and Sips models fit better the Langmuir model, indicating that heterogeneous multilayer sorption was dominant during the phosphate sorption process. Sorption kinetic results showed that the pseudo-first-order kinetic model can describe well the phosphate sorption process by M-La₂(MoO₄)₃ (2:1). Consecutive sorption-desorption runs showed that M-La₂(MoO₄)₃ (2:1) could be reused for a few cycles. Simultaneous removal of phosphate and organic matter was achieved in real wastewater by using M-La₂(MoO₄)₃ (2:1). The sorption mechanism was inner-sphere complexation.

Dual-functional micro-adsorbents: Application for simultaneous adsorption of cesium and strontium

In current work, Prussian blue (PB)- and hydroxyapatite (HAp)-embedded micro-adsorbents (PB-HAp-MAs) were rationally fabricated through an easy and flexible custom-made micronozzle system as a novel bifunctional adsorbent. The adsorption performance of the as-prepared samples was conducted based on the removal of cesium (Cs⁺) and strontium (Sr²⁺) ions. Adsorption behaviors of the PB-HAp-MAs were also evaluated as function extrusion dimensions and adsorbate concentration. The adsorption isotherm was well fitted by the Langmuir model with adsorption capacities of 24.688 mg g^-1 and 29.254 mg g^-1 for Cs⁺ and Sr²⁺, respectively. Specially, the enhanced adsorption activity can be synergistically attributed to the porous nature of the developed alginate backbone with a high surface area of encapsulated functional nanoparticles, thus leading to rapid saturation within 1 min. In addition, the as-synthesized PB-HAp-MAs were successfully separated from the aqueous solution within 10 s by applying a magnetic field. We expect that our findings will provide valuable guidelines towards developing highly efficient adsorbents for environmental remediation.

Synthesis of a super-absorbent nanocomposite hydrogel based on vinyl hybrid silica nanospheres and its properties

Superabsorbent polymers as soft materials that can absorb water have aroused great interest in the fields of agriculture and forestry. Water absorption and water retention performance of a hydrogel are important indicators to evaluate its practical application. However, few reports show that hydrogels have both excellent water absorption and water retention properties. To date, superabsorbent hydrogels with a swelling capacity of more than 3000 g g⁻¹ have rarely been reported. In this work, a novel superabsorbent poly(acrylic acid) (PAA)-based nanocomposite hydrogel (NC gel) was prepared via free radical polymerization of acrylic acid by using vinyl hybrid silica nanospheres (VSNPs) as the cross-linking agent. The PAA NC hydrogel achieved a great swelling ratio of more than 5000 times in deionized water at 323 K, and the swollen hydrogel could hold 60% moisture when it was exposed to the air at 303 K for 42 h. Moreover, the hydrogel also obtained a good swelling ratio of 136 g g⁻¹ in NaCl solution. The PAA NC hydrogel showed excellent repetitive swelling ability. The influences of variable factors (acrylic acid, initiator and sodium hydroxide) on the swelling ratio of the NC hydrogel were researched. It can be speculated that the PAA NC hydrogel has potential application in agriculture and forestry areas due to its excellent water absorption and water retention properties.

Superabsorbent polymers as soft materials that can absorb water have aroused great interest in the fields of agriculture and forestry.

Mechanism of simultaneous removal of aluminum and fluoride from aqueous solution by La/Mg/Si-activated carbon

La/Mg/Si-activated carbon derived from palm shell has been a suitable material for removal of aluminum and fluoride from aqueous solution. In the study, the mechanism of simultaneous removal of aluminum and fluoride by La/Mg/Si-activated carbon (La/Mg/Si-AC) was investigated to understand its high efficiency. It was found that the removal of aluminum and fluoride by La/Mg/Si-AC was favored at lower pH compared to the point of zero charge of La/Mg/Si-AC and high temperature. Adsorption capacity of Al(OH)₄^- was about 10 times higher than that of F^- due to the strong binding affinity of Al(OH)₄^- on protonated surface and competition between F^- and OH^- toward charged adsorption site. Kinetics results showed that the aluminum and fluoride adsorption were explained using the pseudo-second-order kinetic model and intra-particle diffusion model. Adsorption process of Al(OH)₄^- and F^- was driven by the potential rate-limiting step involved in mass transport process occurred on the boundary diffusion layer of porous adsorbent surface. Electrostatic interaction between protonated surface of La/Mg/Si-AC and negatively charged ions (i.e., Al(OH)₄^- and F^-) as well as ion-exchange between hydroxide and ionic metal species were important mechanisms in the process of aluminum and fluoride adsorption. Driving forces for adsorption of individual Al(OH)₄^- and F^- were not entirely different. Identifying the dominant mechanism will be helpful in understanding the adsorption process and developing new adsorbent.

The adsorption of Mn(II) by insolubilized humic acid

The eco-friendly and non-toxic natural organic substance, insolubilized humic acid (IHA), was used to remove Mn(II) from aqueous solutions. The adsorption characteristics were studied through a series of static adsorption tests. The results show that conditions such as the dose, the pH of the solution and the initial concentration of Mn(II) all affect removal efficiency, and the optimal pH value was 5.5. The sorption process for Mn(II) on IHA conforms to the pseudo-second-order adsorption kinetic model and intra-particle diffusion is not the only factor affecting the adsorption rate. Both Langmuir and Freundlich models can describe this adsorption behavior, and the experimental maximum adsorption capacity of IHA was 52.87 mg/g under optimal conditions. The thermodynamic analysis of adsorption shows that the adsorption process is a non-spontaneous endothermic physical reaction. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) were used to characterize the samples, it was found that as IHA successfully adsorbed Mn(II), the surface morphology of IHA changed after the adsorption reaction. The adsorption mechanism for Mn(II) on IHA is to provide electron pairs for carboxyl, phenolic hydroxyl and other functional groups to form stable complexes with Mn(II).

Water defluorination using granular composite synthesized via hydrothermal treatment of polyaluminum chloride (PAC) sludge

In this work, we newly synthesized granular composite (GASA) via hydrothermal treatment of polyaluminum chloride (PAC) and subsequently granulation pelleting with starch gel as an organic binder. The resulting composite was characterized with analytic instruments, and the feasibility of utilizing GASA as adsorbent for the removal of fluoride (F^-) was tested in the batch and column experiments. The characterization results revealed that GASA possessed a spherical/porous framework consisting of aluminosilicate (i.e., ordered albite, NaAlSiO₃O₈). The results of final pH effect experiments and XRD/XPS analyses showed the dominant adsorption mechanisms of F^- on GASA were electrostatic attraction by protonated surface Al-OH, ligand exchange between surface hydroxyl groups and F ions, and surface precipitation (i.e., cryolite formation). Based on the results of adsorption kinetics and adsorption isotherm, granulation resulted in the relatively slow kinetics of F adsorption compared to the powder type, but was preferred to retain good adsorption capacity. The regeneration possibility of GASA was also proven with the adsorption/desorption cyclic test. In the column study, 15-cm length of the GASA layer and the flow rate less than 0.85 mL min^-1 were proposed to keep the satisfactory level of F in water. The experimental results offer a potential of PAC sludge-derived composite as adsorbent for the removal of F from water.

Brilliant red X-3B uptake by a novel polycyclodextrin-modified magnetic cationic hydrogel: Performance, kinetics and mechanism

A novel polycyclodextrin-modified magnetic cationic hydrogel (PCD-MCH) was developed and its performance, kinetics and mechanism for the removal of reactive brilliant red X-3B (X-3B) were studied. The results showed that the zeta-potential of PCD-MCH was 32.8 to 16.7mV at pH3.0-10.5. The maximum X-3B adsorption capacity of PCD-MCH was 2792.3mg/g. The adsorption kinetics could be well-described by the Weber-Morris model and the homogeneous surface diffusion model (HSDM). Diffusion stages corresponding to surface or film diffusion, intra-particle or wide mesopore diffusion, and narrow mesopore/micropore diffusion occurred at 0-120, 120-480 and 480-1200min, respectively. The latter two diffusion stages were rate-controlling for X-3B adsorption kinetics. At the initial X-3B concentration of 600mg/L, the diffusion coefficient (D_s) and external mass transfer coefficient in the liquid phase (k_F) were 3×10^-11cm²/min and 4.68×10^-6cm/min, respectively. X-3B approaching the center of PCD-MCH particles could be observed at 360min. At the end of the third diffusion stage, the C_p at q/q_e=0 was 45.20mg/L, which was close to the homogeneous C_p value of 46mg/L along the radius of PCD-MCH particles. At pH3.0-10.0, PCD-MCH showed stable X-3B adsorption capacities. After five regeneration-reuse cycles, the residual adsorption capacity of regenerated PCD-MCH was higher than 892.7mg/g. The corresponding adsorption mechanism was identified as involving electrostatic interactions, cyclodextrin cavities and hydrogen bonds, of which cyclodextrin cavities showed prominent capture performance towards dye molecules through the formation of inclusion complexes.