Efficacy of carbonaceous nanocomposites for sorbing ionizable antibiotic sulfamethazine from aqueous solution

A comprehensive review of the "black gold catalysts" in wastewater treatment: Properties, applications and bibliometric analysis

A significant amount of effort has been devoted to the utilization of biochar-based catalysts in the treatment of wastewater. By virtue of its abundant functional groups and high specific surface area, biochar holds significant promise as a catalyst. This article presents a comprehensive systematic review and bibliometric analysis covering the period from 2009 to 2024, focusing on the restoration of wastewater through biochar catalysis. The production, activation, and functionalization techniques employed for biochar are thoroughly examined. In addition, the application of advanced technologies such as advanced oxidation processes (AOPs), catalytic reduction reactions, and biochemically driven processes based on biochar are discussed, with a focus on elucidating the underlying mechanisms and how surface functionalities influence the catalytic performance of biochar. Furthermore, the potential drawbacks of utilizing biochar are also brought to light. To emphasize the progress being made in this research field and provide valuable insights for future researchers, a scientometric analysis was conducted using CiteSpace and VOSviewer software on 595 articles. Hopefully, this review will enhance understanding of the catalytic performance and mechanisms pertaining to biochar-based catalysts in pollutant treatment while providing a perspective and guidelines for future research and development efforts in this area.

Knowledge graph and development hotspots of biochar as an emerging aquatic antibiotic remediator: A scientometric exploration based on VOSviewer and CiteSpace

As an emerging material in the field of environmental remediation, biochar produced by carbonisation of organic solid waste has been widely used in the remediation of antibiotic wastewater due to its environmental friendliness and excellent adsorption properties. This study analyses the current literature in the field in a comprehensive and scientific manner using CiteSpace and VOSviewer technologies. Between 2011 and 2023, a total of 1162 papers were published in this domain, spanning three distinct stages: applied methods, mechanism investigation, and enhanced improvement. The results of keyword clustering indicate that the remediation of antibiotics complexed with multiple pollutants by biochar is the main research topic, followed by the remediation of antibiotics by biochar in combination with other technologies. Furthermore, drawing from current research hotspots in antibiotic remediation using biochar, this study identified the pivotal mechanisms involved: (1) The primary mechanisms by which raw biochar remediates antibiotics include π-π electron donor-acceptor interactions, hydrophobic interactions, electrostatic interactions, hydrogen-bonding, and pore filling. (2) Steam activation, acid/base, metal salt/metal oxide, and clay mineral modification can improve the physical/chemical properties of biochar, enhancing its adsorptive removal of antibiotics. (3) Biochar activated persulfate and degraded antibiotics via free radical pathways (SO4-•, •OH and O2-•) as well as non-free radical pathways (1O2 and electron transfer). In addition, the challenge and prospect of biochar engineering applications for antibiotic remediation lies in improving the main mechanism of antibiotic remediation by biochar. The prospective utilization of biochar in enhancing the remediation of antibiotic-related pollutants holds tremendous value for the future.

Fluorescent Sensors for Tetracycline Detection in Aqueous Medium: A Mini-Review

Tetracycline (TC) is a commonly used antibiotic in human therapy and animal husbandry. Public concerns about TC residues inflated due to their negative impact on the environment, food, and human health concerns. To ensure human health and safety, there is a need for fluorogenic chemosensors that can easily detect TC antibiotics with high selectivity and sensitivity in the aqueous medium. This mini-review discusses the progress and achievements in several fluorometric antibiotic tetracycline detection methods. Fluorogenic chemosensors for tetracycline antibiotics with easy-to-use, high selectivity, and sensitivity have been essentially required to regulate food safety and secure human health and safety. Moreover, we gave more attention to the practical applicability of chemosensors for tetracycline antibiotics in food and water quality assessment. This article starts with a section that constitutes an overview of the problems of antibiotics and the typical features of traditional techniques of antibiotic detection. It then goes on to describe up-to-date optical methods for the selective detection and efficient removal of TC. These methods involve a variety of platforms, like tetraphenylethylene polymers, metal complexes, self-assembled CuNCs, and hydrogel. The article also discusses the practical applicability of chemosensors for tetracycline antibiotics in food and water quality.

Adsorption Characteristics of Ball Milling-Modified Chinese Medicine Residue Biochar Toward Quercetin

Using traditional Chinese medicine residues as raw materials, different biochars (BC) were prepared through oxygen-limited pyrolysis at 300 °C, 500 °C, and 700 °C, and BC was ball-milled to produce ball-milled biochar (BMC). Using these adsorbents to adsorb the allelopathic autotoxic substance quercetin. The physical and chemical properties of various biochars derived from traditional Chinese medicine residues were characterized using the Brunauer-Emmett-Teller-N2 surface areas (BET), scanning electron microscopy (SEM), Fourier transform IR spectroscopy (FTIR), X-ray diffraction (XRD), and Raman spectroscopy (Raman). The study investigated the effects of the initial pH value, different humic acid concentrations, and multiple adsorption-desorption experiments on the removal of quercetin from the solution. The article discusses the adsorption mechanism of quercetin in solution by biochar from a traditional Chinese medicine residue, based on the results of adsorption kinetics and adsorption isotherm fitting. The findings indicate that increasing the pyrolysis temperature reduces the oxygen-containing functional groups of BC, enhances the aromaticity, and stabilizes the carbon structure. The pore structure of BMC becomes more complex after ball milling, which increases the number of oxygen-containing functional groups on the surface. Among the samples tested, BMC700 exhibits the best adsorption performance, with an adsorption capacity of 293.3 mg·g-1 at 318 K. The adsorption process of quercetin by BMC700 follows the pseudo-second-order kinetic model and the Freundlich adsorption isotherm model. The process is primarily a form of multimolecular layer adsorption. Its mechanism involves the pore-filling effect, hydrogen-bonding interaction, electrostatic interaction, and π-π coexistence, as well as the yoke effect. Additionally, they are highly recyclable and show promise in addressing continuous cropping issues.

Adsorption of acetochlor-contaminated water systems using novel P-doped biochar: Effects, application, and mechanism

Given the serious threat of acetochlor (ACT) to the aquatic ecological environment, designing wastewater treatment-oriented adsorbents for the sustainable remediation of actual ACT-contaminated water is a promising yet challenging strategy. Herein, a novel P-doped biochar (PBC-800) with a high adsorption capacity (51.34 mg g-1) and a rapid reaction rate (47.35 mg g-1 h-1) for ACT was prepared through pyrolyzing of rice straw biomass pre-impregnated with potassium dihydrogen phosphate (KH2PO4). Additionally, P-doped biochars synthesized at different pyrolysis temperatures exhibited significant variations in ACT adsorption performance, which was mainly ascribed to the distinction between hydrophilicity and sp2 conjugate C (ID/IG = 0.84-1.08). The adsorption behavior of ACT on PBC-800 followed the Elovich kinetics and Freundlich adsorption isotherm models. Thermodynamic calculations indicated that the adsorption of ACT by PBC-800 was a spontaneously disordered decreasing exothermic process. Besides, PBC-800 exhibited a powerful anti-interference for ACT adsorption within complex water matrices, highlighting its potential for various of practical applications. Through characterization analysis and further experiments, it was proved that the excellent adsorption performance of PBC-800 on ACT was ascribed to a combination of physical and chemical adsorption mechanisms, including 57.5% pore filling, 23.4% hydrophobic interaction, 12.7% π-π interaction, and 6.4% hydrogen bonding. Moreover, PBC-800 exerted a prominent adhesion impact upon Gram-positive and negative bacteria at 3 h. This study offers a new idea for the utilization of agricultural residues and provides insights into the mechanism of ACT adsorption through its derived biochar.

Strategy for improvement of molecular oxygen activation capacity of PPECu by chlorine doping for water decontamination

The activation of molecular oxygen and generation of reactive oxygen species (ROS) play important roles in the efficient removal of contaminants from aqueous ecosystems. Herein, using a simple and rapid solvothermal process, we developed a chlorine-doped phenylethynylcopper (Cl/PPECu) photocatalyst and applied it to visible light degradation of sulfamethazine (SMT) in aqueous media. The Cl/PPECu was optimized to have a 2.52 times higher steady-state concentration of O2•- (3.62 × 10-5 M) and a 28.87 times higher degradation rate constant (0.2252 min-1) for SMT compared to pure PPECu. Further, the effectiveness of Cl/PPECu in treating sulfonamide antibiotics (SAs) in real water systems was verified through an investigation involving natural water bodies, SAs, and ambient sunlight. The energy band structure, DFT calculation and correlation heat map indicated that the addition of chlorine modulated the local electronic structure of PPECu, leading to an improvement in the electron-hole separation, enhanced the O2 activation, and promoted the generation of ROSs. This study not only puts forward innovative ideas for the eco-compatible remediation of environmental pollution using PPECu, but also sheds new light on the activation of oxygen through elemental doping.

Conversion of solid wastes and natural biomass for deciphering the valorization of biochar in pollution abatement: A review on the thermo-chemical processes

This overview addresses the formation of solid trash and the various forms of waste from a variety of industries, which environmentalists have embraced. The paper investigates the negative effects on the environment caused by unsustainable management of municipal solid trash as well as the opportunities presented by the formal system. This examination looks at the origins of solid waste as well as the typical treatment methods. Pyrolysis methods, feedstock pyrolysis, and lignocellulosic biomass pyrolysis were highlighted. Explain in detail the various thermochemical processes that take place during the pyrolysis of biomass. Due to its carbon content, low cost, accessibility, ubiquitousness, renewable nature, and environmental friendliness, biomass waste is a unique biochar precursor. This study looks at the different types of biomass waste that are available for treating wastewater. This study discussed a wide variety of reactors. Adsorption is the standard method that is used the most frequently to remove hazardous organic, dye, and inorganic pollutants from wastewater. These pollutants cause damage to the environment and water supplies, thus it is important to remove them. Adsorption is both simple and inexpensive to utilize. Temperature-dependent conversions explain the kinetic theories of biomaterial biochemical degradation. This article presents a review that explains how pyrolytic breakdown char materials can be used to reduce pollution and improve environmental management.

A portable test strip fabricated of luminescent lanthanide-functionalized metal-organic frameworks for rapid and visual detection of tetracycline antibiotics

Tetracycline antibiotics (TCs) are commonly used antibiotics in the treatment of infections, but their overuse has a negative impact on human health and ecosystems. Thus, the development of a facile and on-site visualization method for TC detection is necessary. Here, we propose the potential of using lanthanide-functionalized metal-organic framework (MOF) composites (Ag+/Tb3+@UiO-66-(COOH)2, ATUC) as a probe for the rapid detection of tetracycline (TC), chlortetracycline (CTC), oxytetracycline (OTC), and doxycycline (DOX) residues, in which UiO-66-(COOH)2 (UC) could be utilized to provide an interaction microenvironment, Tb3+ as recognition units and Ag+ as a fluorescence enhancer. Upon exposure to TCs, significant luminescence quenching of ATUC excited at 255 nm was observed due to the inner filter effect (IFE) and photo-induced electron transfer (PET), and the established strategy has a detection limit (LOD) of 11.0, 20.1, 9.1, and 22.5 nM for TC, CTC, OTC, and DOX, respectively. More importantly, given its portability and conspicuous luminescence color gradation variation, a portable test strip based on ATUC was manufactured and the results could be distinguished immediately by the naked eye and smartphone analysis, allowing for on-site rapid quantitative assay of TCs, not only in the laboratory but also in a point-of-care setting.

Iron (II) phthalocyanine loaded tourmaline efficiently activates PMS to degrade pharmaceutical contaminants under solar light

Iron (II) phthalocyanine (FePc) is loaded on the surface of the tourmaline (TM) by the reflow method to obtain FePc/TM. This research effectively prevents the π-π stacking of FePc, increased the effective utilization rate of PMS activation under solar light, and further improved the catalytic performance of the catalytic system. The catalytic oxidation efficiency of FePc/TM on carbamazepine (CBZ) and sulfadiazine (SD) can reach 99% under solar light for 15 and 5 min, the total organic carbon (TOC) removal rate can reach 58% and 69% under solar light for 120 min. After 6 cycles, the CBZ removal rate remained above 95%. In addition, the FePc/TM catalytic system has an excellent removal rate for other pharmaceuticals. The results of spin-trapped electron paramagnetic resonance and classical quenching experiments show that FePc/TM can effectively activate PMS to generate active species under solar light, including superoxide radical (•O2-), singlet oxygen (1O2), hydroxyl radicals(•OH), and sulphate radicals (SO4•-). The intermediates of CBZ were identified by Ultra-high performance liquid chromatography and high resolution mass spectrometry, and the degradation pathway was proposed. As the reaction progresses, all CBZ and intermediates are reduced and converted into small acids, or mineralized to H2O, CO2. This work provides an alternative method for the design of efficient activation of PMS activation catalysts under solar light to eliminate residual pharmaceuticals in actual water bodies.

Degradation of polyvinyl alcohol (PVA) in neutral conditions based on copper-manganese bimetallic catalyst

There have been many studies on the degradation of polyvinyl alcohol (PVA) by the Fenton-like method, but the narrow acid-base (pH) range, poor degradation effect, and time-consuming of the Fenton-like method limit its development. Therefore, to improve the shortcomings of the Fenton-like method, the study aimed to synthesize copper-manganese bimetal oxide loaded catalysts (MnCuO@γ-Al2O3) through the impregnation calcination method, and its potential to activate hydrogen peroxide (H2O2) for the degradation of PVA was evaluated. The X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer Emmett Teller (BET), energy dispersive spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) characterizations revealed the chemical composition, structure and morphology of the prepared MnCuO@γ-Al2O3, furthermore the synergistic mechanism was proposed. Results indicated that copper and manganese could successfully attach to γ-Al2O3 and reduce the specific surface area of γ-Al2O3, promoting the transformation of multivalent metals and the generation of oxygen vacancies. In addition, comparative experiments demonstrated that the PVA removal efficiency was significantly improved at the catalyst calcination temperature of 500 °C, reaction temperature of 70 °C, H2O2 dosage of 125 [Formula: see text], and catalyst dosage of 625 [Formula: see text] and more than 96% of PVA was removed within 20 min in neutral conditions. Lastly, four catalyst cycle degradation experiments of PVA were carried out, and the degradation effect could reach more than 96% in a certain time.

Insight into the effect of pyrolysis temperature on photoreactivity of biochar-derived dissolved organic matter: Impacts of aromaticity and carbonyl groups

Practical application of biochar may result in more biochar-derived dissolved organic matter (denoted as BDOM) inevitably release into surface waters by infiltration and surface runoff. The photochemical reaction of BDOM has gained intense attention, which played a key role in the fate of organic contaminants. However, the relationships between specific characteristics of BDOM and its photoreactivity are still uncertain. In this study, the characteristics of BDOM pyrolyzed from rice husk derived biochar at different temperature (from 400 °C to 700 °C) and their effect on the photodegradation of oxytetracycline (OTC) were carefully investigated. The ¹³C NMR and EEM results indicated the dominated component of BDOM was gradually turned from humic acid like substances with low aromaticity to high aromaticity with abundant oxygen-containing functional groups as pyrolytic temperature increases. Experimental results showed that the apparent rate constants (k_obs) of BDOM700 (4.53 × 10^-2 min^-1) for OTC photodegradation was approximately one order of magnitude higher than BDOM400 (4.52 × 10^-3 min^-1), which was closely correlated with their aromaticity (R² = 0.944). It was found that ³BDOM* rather than ¹O₂ played the major role in BDOM mediated photodegradation of OTC (80.13 % vs 14.34 %), and the carbonyl-containing group was identified as the main ³BDOM* precursor by NaBH₄ reduction experiment. This work highlighted both aromaticity and carbonyl group contents were critical indicators for assessing the potential to generate ³BDOM* and corresponding photoreactivity.

Effective adsorptive removal of sulfamethoxazole (SMX) from aqueous solution by ZIF-8 derived adsorbent ZC-0.5

Efficient removal of antibiotics from the aquatic environment is urgently needed due to their obstinate accumulation and non-biodegradability. In this study, a mesoporous carbon material (ZC-0.5) was successfully synthesized for the adsorption of sulfamethoxazole (SMX), one of the major antibiotics for the treatment of human and animal infections. ZIF-8 as the precursor of ZC-0.5, specifically, using cetyl trimethyl ammonium bromide (CTAB) and sodium laurate (SL) as dual templates and carbonizing at 800 ℃. This novel adsorbent exhibited a high proportion of mesopore (75.64%) and a large specific surface area (1459.73 m²·g^-1). The adsorption experiment examined the reusability of ZC-0.5 and that it could retain superior maximum adsorption capacities (167.45 mg∙L^-1) after five cycles of adsorption and desorption. The adsorption process satisfied the pseudo-second-order kinetic (PSO) and mixed first- and second-order kinetic (MOE). It also satisfied the Freundlich and Sips isotherm models. Moreover, thermodynamic calculation indicated the adsorption process was spontaneous, endothermal, and entropy-increasing. Furthermore, plausible adsorption mechanisms were explained through van der Waals force, electrostatic interaction, hydrophobic force, π-π interaction, and hydrogen bond. This work offers a new efficient adsorbent for antibiotic elimination.

High capacity adsorption of oxytetracycline by lignin-based carbon with mesoporous structure: Adsorption behavior and mechanism

In this study, an adsorbent with mesoporous structure and PO/PO bonds is prepared by hydrothermal and phosphoric acid activation from industrial alkali lignin for the adsorption of oxytetracycline (OTC). The adsorption capacity is 598 mg/g, which is three times higher than that of the adsorbent with microporous structure. The rich mesoporous structure of the adsorbent provides adsorption channels and filling sites, and π-π attraction, cation-π interaction, hydrogen bonds, and electrostatic attraction provide adsorption forces at the adsorption sites. The removal rate of OTC exceeds 98 % over a wide range of pH values (3-10). It has high selectivity for competing cations in water, with higher than 86.7 % removal rate of OTC from medical wastewater. After 7 consecutive adsorption-desorption cycles, the removal rate of OTC remains as high as 91 %. This efficient removal rate and excellent reusability indicate the strong potential of the adsorbent for industrial applications. This study prepares a highly efficient, environmentally friendly antibiotic adsorbent that can not only efficiently remove antibiotics from water but also recycle industrial alkali lignin waste.

Crystal structure and characterization of the sulfamethazine-piperidine salt

Sulfamethazine [N¹-(4,6-dimethylpyrimidin-2-yl)sulfanilamide] is an antimicrobial drug that possesses functional groups capable of acting as hydrogen-bond donors and acceptors, which make it a suitable supramolecular building block for the formation of cocrystals and salts. We report here the crystal structure and solid-state characterization of the 1:1 salt piperidinium sulfamethazinate (PPD⁺·SUL^-, C₅H₁₂N⁺·C₁₂H₁₃N₄O₂S^-) (I). The salt was obtained by the solvent-assisted grinding method and was characterized by IR spectroscopy, powder X-ray diffraction, solid-state ¹³C NMR spectroscopy and thermal analysis [differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)]. Salt I crystallized in the monoclinic space group P2₁/n and showed a 1:1 stoichiometry revealing proton transfer from SUL to PPD to form salt I. The PPD⁺ and SUL^- ions are connected by N-H⁺...O and N-H⁺...N interactions. The self-assembly of SUL^- anions displays the amine-sulfa C(8) motif. The supramolecular architecture of salt I revealed the formation of interconnected supramolecular sheets.

An inner filter effect-based fluorescent aptasensor for sensitive detection of kanamycin in complex samples using gold nanoparticles and graphene oxide quantum dots

In this work, a label-free fluorescent aptasensor based on the inner filter effect (IFE) between gold nanoparticles (AuNPs) and graphene oxide quantum dots (GOQDs) was developed for the detection of kanamycin in complex samples. AuNPs are capable of functioning as the fluorescence absorber of GOQDs because of the complementary overlap between their absorption spectra and the emission spectra of GOQDs. AuNPs can effectively quench the fluorescence of GOQDs via the IFE and modulate it with their aggregation state. In the presence of kanamycin, the aptamer is released from the surface of AuNPs, leading to their salt-induced aggregation and the fluorescence recovery of GOQDs. Under the optimum conditions, the fluorescence intensity of GOQDs was linearly proportional to the concentration of kanamycin over the range from 5 to 600 nM, with a detection limit of 3.6 nM. Moreover, the fluorescent aptasensor was successfully applied for kanamycin detection in complex samples (milk, honey and serum), which might hold great promise for kanamycin detection in food safety control and clinical research.

Selective adsorption of antibiotics on manganese oxide-loaded biochar and mechanism based on quantitative structure-property relationship model

In this study, MnCl₂-impregnated biomass was oxygen-limited pyrolyzed to produce manganese oxide-loaded biochar (MBC), its adsorption behaviors and influencing factors on tetracycline (TTC), norfloxacin (NOR), and sulfamethoxazole (SMX) were systematically investigated. Three antibiotics exhibited enhanced adsorption behavior on MBC, with maximum adsorption capacity as accurately described by Sips isotherm: TTC (534 mg/g) > NOR (67 mg/g) > SMX (28 mg/g). Hydrogen bonding, n/π-π interactions, electrostatic interaction, surface coordination, and hydrophobic interaction are the major mechanisms for the improved adsorption. Manganese oxide particles on MBC promoted surface coordination and hydrogen bonding. Antibiotic molecules with more hydroxyl oxygen-containing functional groups are more susceptible to migrate to biochar surfaces and to be adhered. Moreover, the quantitative structure-property relationship (QSPR) model was constructed and revealed that hydrogen bonding and π-π interactions were crucial for tetracycline antibiotics selective adsorption. Hence, MBC was a prospective adsorbent with promising applications for antibiotic removal in sewage processing.

Removal of doxycycline hydrochloride from aqueous solution by rice husk ash using response surface methodology and disposability study

The huge demand and consumption of DOX, its incomplete metabolism, and complex behavior in atmosphere are causing a great ecological issue, which needs to be solved. In the present study, the suitability of rice husk ash (RHA) for the greater sorption efficiency of DOX antibiotic was investigated. Furthermore, disposability study of exhausted RHA was performed using solidification technique and leachate had undergone toxicity test to evaluate the DOX encapsulation ability. The central composite design under RSM was employed for the design of experiment and optimization of adsorption parameters. RHA was characterized using various techniques such as XRD, SEM (EDX), FTIR, BET, and zeta potential analysis. The influence of various adsorption parameters, like initial DOX concentration (C₀), RHA dosage (m), incubation-time period (t), and pH were examined on the performance in terms of DOX elimination % (X₁) and adsorptive capacity (mg/g) (X₂). At optimized conditions, the obtained X₁ and X₂ were 98.85% and 17.74 mg/g, respectively. Moreover, the kinetics data suited well to the pseudo-second-order model. Freundlich, Langmuir, and Redlich-Peterson (R-P) isotherm models were applied, out of which Langmuir model best performed under optimized conditions; m = 5 g/L, t = 85.85 min, DOX concentration = 89.73 mg/L, and pH = 6. The bacterial toxicity test of leachate confirmed complete encapsulation of DOX by solidification technique.

Transcriptome analysis and cytochrome P450 monooxygenase reveal the molecular mechanism of Bisphenol A degradation by Pseudomonas putida strain YC-AE1

BACKGROUND

Bisphenol A (BPA) is a rapid spreading organic pollutant that widely used in many industries especially as a plasticizer in polycarbonate plastic and epoxy resins. BPA reported as a prominent endocrine disruptor compound that possesses estrogenic activity and fulminant toxicity. Pseudomonas putida YC-AE1 was isolated in our previous study and exerted a strong degradation capacity toward BPA at high concentrations; however, the molecular degradation mechanism is still enigmatic.

RESULTS

We employed RNA sequencing to analyze the differentially expressed genes (DEGs) in the YC-AE1 strain upon BPA induction. Out of 1229 differentially expressed genes, 725 genes were positively regulated, and 504 genes were down-regulated. The pathways of microbial metabolism in diverse environments were significantly enriched among DEGs based on KEGG enrichment analysis. qRT-PCR confirm the involvement of BPA degradation relevant genes in accordance with RNA Seq data. The degradation pathway of BPA in YC-AE1 was proposed with specific enzymes and encoded genes. The role of cytochrome P450 (CYP450) in BPA degradation was further verified. Sever decrease in BPA degradation was recorded by YC-AE1 in the presence of CYP450 inhibitor. Subsequently, CYP450bisdB deficient YC-AE1 strain △ bisdB lost its ability toward BPA transformation comparing with the wild type. Furthermore, Transformation of E. coli with pET-32a-bisdAB empowers it to degrade 66 mg l^-1 of BPA after 24 h. Altogether, the results showed the role of CYP450 in biodegradation of BPA by YC-AE1.

CONCLUSION

In this study we propose the molecular basis and the potential role of YC-AE1cytochrome P450 monooxygenase in BPA catabolism.

One-step synthesis of a novel natural mineral-derived Fe@BC for enhancing Cr(VI) bioreduction: Synergistic role of electron transfer and microbial metabolism

Iron minerals, which exert excellent biocompatibility and reactivity with redox-active microorganisms, have attracted attention as a precursor to synthesizing composite materials with higher catalytic efficiency in driving redox-active microorganisms to reduce Cr(VI). However, researches on the effective preparation method of composites, the interaction between bacteria and composite materials and the mechanism of electron transfer are still scarce. In this work, Fe-complex@BC prepared by a one-step method using goethite was used for chromium treatment together with soil microorganisms. The composite was the best-performing in promoting Cr(VI) bioreduction (up to 3.48 mg (L·h)^-1) than Fe-complex (2.26 mg (L·h)^-1) and biochar (0.5 mg (L·h)^-1), even about 19 times higher than that of bioreduction without materials. Specifically, Fe-complex@BC shortened the electron transfer distance due to its excellent adsorption properties for bacteria and Cr(VI). Its high redox activity also promoted Cr(VI) bioreduction by directly enhancing electron transfer. In addition, the presence of the Fe(III)/Fe(II) cycle proved that the active sites of composite could be regenerated to reduce Cr(VI) persistently by receiving extracellular electrons from bacteria. High-throughput 16 S rDNA gene sequencing indicated the composite could promote the proliferation of electrochemically active bacteria, which directly enhanced bioreduction. This study developed the low-cost Fe@BC material prepared by a one-step co-pyrolysis method, which exerts a synergistic effect with soil microorganisms and presents a promising potential for chromium pollution treatment.

Preparation and Adsorption Properties of Magnetic Molecularly Imprinted Polymers for Selective Recognition of 17β-Estradiol

In this paper, magnetic molecularly imprinted polymers (MMIPs) were fabricated on the surface of Fe3O4 by surface molecular imprinting technology, which can selectively adsorb 17β-estradiol (E2). The optimized experiments demonstrated that MMIPs possessed the best adsorption capacity when methanol was used as the solvent and MAA was used as the crosslinking agent, with a molar ratio of E2: MMA: EGDMA as 1:4:50. SEM, FTIR, and XRD were employed to investigate the morphologies of MMIPs and the results demonstrated that the MMIPs that can selectively adsorb E2 were successfully prepared on Fe3O4 particles. The adsorption experiments showed that 92.1% of E2 was adsorbed by the MMIPs, which is higher than the magnetic non-molecularly imprinted polymers (MNIPs). The Freundlich isotherm model was more suitable to describe the adsorption process of E2 by MMIPs. Meanwhile, MMIPs had a better recognition ability for E2 and its structural analogs such as estrone and estriol. The MMIPs still had good adsorption performance after methanol regeneration five times. The prepared MMIPs had the advantages of efficient adsorption ability and high reusability, so they can be applied for selective recognition and removal of E2.

Intercalating negatively charged pillars into graphene oxide sheets to enhance sulfonamide pharmaceutical removal from water

Herein, novel composite materials were prepared by intercalating functional pillars, i.e., pentafluorobenzene (PFB) and sodium 2,3,4,5,6-pentafluorobenzoate (PFBS), into graphene oxide (GO) sheets. It led to forming size hives and increased availability of intrinsic area of GO. The synthesized materials (GO-PFB and GO-PFBS) were investigated as adsorbents to eliminate sulfadiazine (SD) from aqueous solutions. The adsorption capacities of GO-PFBS (1002.21 μmol/g) and GO-PFB (564.17 μmol/g) were 6.37 and 3.59 times higher than that of GO (157.21 μmol/g), respectively. The adsorption of SD onto GO-PFBS decreased with increasing solution pH. Density functional theory (DFT) results revealed that the SD adsorption onto the adsorbents was exothermic, and the introduction of the carboxylate groups showed lower binding energy. It was found that hydrophobic interaction fully participates in the adsorption process, and the electrostatic complementation of hydrogen bonding further enhances the SD adsorption. Obtained results showed that intercalating functional rigid molecules as pillars to support GO sheets could improve its adsorption behavior.

Efficient visible-light-driven degradation of tetracycline by a 2D/2D rGO-Bi2WO6 heterostructure

Constructing heterostructures has been a simple yet effective strategy for improving the photocatalytic performance of individual semiconductor photocatalysts. However, the poor quality of the contacted interface coupled with the narrow and overlapping light absorption scope between heterocomponents limits potential improvement. Herein, a 2D/2D rGO-Bi₂WO₆ heterostructure with face-to-face compact contact interface and UV to NIR light absorption ability was synthesized to overcome the aforementioned limitations. The as-prepared 2 wt%-rGO-Bi₂WO₆ with a high contact interface quality exhibits the highest kinetic rate of (5.53 ± 0.75) × 10^-2 L mg^-1 min^-1 toward tetracycline (TC) degradation, which is 2.4 times higher than that of pristine Bi₂WO₆ and 2.1 times higher than that of the 2 wt%-rGO-Bi₂WO₆ composite with a poor interface quality. Moreover, approximately 30% of TC can be mineralized with a 2 wt%-rGO-Bi₂WO₆ presented system after 120 min. The subsequent Escherichia coli culture and liquid chromatography-mass spectrometry were employed to detect the biotoxicity variation of degradation intermediates and the possible transformation pathways of TC, respectively. Finally, the reactive species trapping results indicate that photogenerated holes and superoxide radical anions play dominant roles during the TC degradation process. This work provides a facile and effective method to fabricate an efficient heterojunction photocatalyst for pollutant degradation.

Novel sphere-like copper bismuth oxide fabricated via ethylene glycol-introduced solvothermal method with improved adsorptive and photocatalytic performance in sulfamethazine removal

In this research, ethylene glycol-introduced solvothermal method was employed to fabricate a novel sphere-like CuBi₂O₄ material to improve the adsorptive and photocatalytic performance of conventional CuBi₂O₄. A series of characterization has been applied to investigate properties of the obtained CuBi₂O₄ (CBO-EG3). Compared with conventional rod-like CuBi₂O₄ (CBO), the synthesized sphere-like CBO-EG3 exhibited rough surface, larger specific surface area, and more effective separation of photo-generated carriers, which overcome main shortcomings of CuBi₂O₄. The removal efficiency of typical antibiotic sulfamethazine (SMZ) reached almost 100% under the optimal experimental conditions. About 70% of SMZ could be adsorbed in 180-min dark reaction, with residual being photodegraded in 30 min. CBO-EG3 showed much higher photocatalytic efficiency than pure CBO, attributing to its highly effective photo-induced electron and hole separation. Meanwhile, substantial adsorption of pollutant on CBO-EG3 contributed vastly to removal of SMZ, photo-generated electrons and holes inclined to react with adsorbed SMZ directly, and photocatalytic process was mainly led by non-radical reaction. Elimination of SMZ in actual water samples and recycling experiment were also performed to evaluate CBO-EG3's practical application potential. This study delivered a method to promote CuBi₂O₄'s adsorptive and photocatalytic ability, which could expand the application of CuBi₂O₄ in wastewater treatment.

Effects of biochar-based materials on the bioavailability of soil organic pollutants and their biological impacts

Motivated by the unique structure and superior properties, biochar-based materials, including pristine biochar and composites of biochar with other functional materials, are considered as new generation materials for diverse multi-functional applications, which may be intentionally or unintentionally released to soil. The influencing mechanism of biochar-based material on soil organisms is a key aspect for quantifying and predicting its benefits and trade-offs. This work focuses on the effects of biochar-based materials on soil organisms within the past ten years. 206 sources are reviewed and available knowledge on biochar-based materials' impacts on soil organisms is summarized from a diverse perspective, including the pollutant bioavailability changes in soil, and potential effects of biochar-based materials on soil organisms. Herein, effects of biochar-based materials on the bioavailability of soil organic pollutants are detailed, from the perspective of plant, microorganism, and soil fauna. Potential biological effects of pristine biochar (PBC), metal/metal compounds-biochar composites (MBC), clay minerals-biochar composites (CMBC), and carbonaceous materials-biochar composites (CBC) on soil organisms are highlighted for the first time. And possible mechanisms are presented based on the different characters of biochar-based materials as well as various environmental interactions. Finally, the bottleneck and challenges of risk assessment of biochar-based materials as well as future prospects are proposed. This work not only promotes the development of risk assessment system of biochar-based materials, but broadens the strategy for the design and optimization of environmental-friendly biochar materials.

Integration of Micro-Nano-Engineered Hydroxyapatite/Biochars with Optimized Sorption for Heavy Metals and Pharmaceuticals

From the perspective of treating wastes with wastes, bamboo sawdust was integrated with a hydroxyapatite (HAP) precursor to create engineered nano-HAP/micro-biochar composites (HBCs) by optimizing the co-precipitated precursor contents and co-pyrolysis temperature (300, 450, 600 °C). The physicochemical properties of HBCs, including morphologies, porosities, component ratios, crystalline structures, surface elemental chemical states, surface functional groups, and zeta potentials as a function of carbonization temperatures and components of precursors, were studied. Biochar matrix as an efficient carrier with enhanced specific surface area to prevent HAP from aggregation was desired. The sorption behavior of heavy metal (Cu(II), Cd(II), and Pb(II)) and pharmaceuticals (carbamazepine and tetracycline) on HBCs were analyzed given various geochemical conditions, including contact time, pH value, ionic strength, inferencing cations and anions, coexisting humic acid, and ambient temperature. HBCs could capture these pollutants efficiently from both simulated wastewaters and real waters. Combined with spectroscopic techniques, proper multiple dominant sorption mechanisms for each sorbate were elucidated separately. HBCs presented excellent reusability for the removal of these pollutants through six recycles, except for tetracycline. The results of this study provide meaningful insight into the proper integration of biochar-mineral composites for the management of aquatic heavy metals and pharmaceuticals.

Degradation of sulfamethazine in water by sulfite activated with zero-valent Fe-Cu bimetallic nanoparticles

In this work, zero-valent Fe-Cu bimetallic nanoparticles were synthesized using a facile method, and applied to activate sulfite for the degradation of sulfamethazine (SMT) from the aqueous solution. The key factors influencing SMT degradation were investigated, namely the theoretical loading of Cu, Fe-Cu catalyst dosage, sulfite concentration and initial solution pH. The experimental results showed that the Fe-Cu/sulfite system exhibited a much better performance in SMT degradation than the bare Fe⁰/sulfite system. The mechanism and possible degradation pathway of SMT in Fe-Cu/sulfite system were revealed. The reactive radicals that played a dominant role in the SMT degradation process were •OH and SO₄^•-, while the loading of Cu induced the synergistic effect between Fe and Cu. The redox cycle between Cu(I)/Cu(II) remarkably contributed to the conversion of Fe(III) to Fe(II), greatly enhancing the catalytic performance of Fe-Cu bimetal. In real groundwater applications, the Fe-Cu/sulfite system also exhibited satisfactory SMT degradation. The 30-day aging tests of Fe-Cu particles demonstrated that the aging of catalyst was not obviously affecting the removal of SMT. Furthermore, the reusability of catalyst was evidenced by the recycling experiments. This study provides a promising application of bimetal activated sulfite for enhanced contaminant degradation in groundwater.

Pivotal roles of nanoscale zerovalent iron supported on metal-organic framework material in cadmium (II) migration and transformation in soil

Cadmium (Cd) contamination in soils is of great concern, and therefore the development of effective remediation technologies for cadmium contamination is urgent. In our study, nano zero-valent iron (NZVI) supported by metal-organic framework (MOF) materials (MOF-NZVI) were prepared using NaBH₄ and FeCl₃ to try to solve the soil Cd remediation problem. Herein, the effects and the mechanism of MOF-NZVI for the immobilization of Cd in contaminated soil was investigated. The results showed that MOF-NZVI was capable of converting Cd in soil from weak acid extractable and reducible fractions to oxidizable and residual states, thus effectively reducing the toxicity of Cd in soil. FTIR and XRD analysis confirmed that the dominant reaction mechanism between MOF-NVZI and Cd is adsorption with complexation, and the stabilization of Cd is achieved by the formation of compounds such as FeOCdOH.

Modulated construction of Fe-based MOF via formic acid modulator for enhanced degradation of sulfamethoxazole：Design, degradation pathways, and mechanism

Metal-organic frameworks (MOFs) have attracted more attention because of their excellent environmental catalytic capabilities. Modulation approach as an advanced assistant strategy is vital essential to enhancing the performance of MOFs. In this study, the modulated method was used to successfully synthesize a group of Fe-based MOFs, with formic acid as the modulator on the synthesis mixture. The most modulated sample Fe-MOFs-2 exhibit high specific surface areas and higher catalytic activity, which could effectively degrade SMX via PS activation, with almost 95% removal efficiency within 120 min. The results revealed that the % RSE of modulated Fe-MOFs-2 increased from 2.31 to 3.27 when compared with the origin Fe-MOFs. This may be due to the addition of formic acid induces the formation of more coordinatively unsaturated metal sites in the catalyst, resulting in structural defects. In addition, the quenching experiment and EPR analysis verified SO₄^-·and·OH as the major active free radicals in the degradation process. Modulated Fe-MOFs-2 demonstrated good reusability and stability under fifth cycles. Finally, four possible degradation pathways and catalytic mechanism of Fe-MOFs-2 was tentatively proposed. Our work provides insights into the rational design of modulated Fe-MOFs as promising heterogeneous catalysts for advanced wastewater treatment.

Periodate activated by manganese oxide/biochar composites for antibiotic degradation in aqueous system: Combined effects of active manganese species and biochar

Developing efficient catalysts for oxytetracycline (OTC) degradation is an ideal strategy to tackle environmental pollution, and advanced oxidation processes (AOPs) have been widely used for its degradation. However, the studies on the activation of periodate (PI) by biochar and its composites in recent years have been scarcely reported. In this study, we focused on the degradation of OTC by PI activation with manganese oxide/biochar composites (Mn_xO_y@BC). Experimental results showed that the OTC degradation rate of Mn_xO_y@BC/PI system reached almost 98%, and the TOC removal efficiency reached 75%. Various characteristic analysis proved that PI could be activated efficiently by surface functional groups and manganese-active species (Mn(II), Mn(III), and Mn(IV)) on biochar, and various reactive species such as singlet oxygen (¹O₂), hydroxyl radical (∙OH), and superoxide radical (O₂^∙-) can be observed via radical quenching experiments. Based on this, three degradation pathways were proposed. Furthermore, Mn_xO_y@BC and PI were combined to degrade environmental pollutants, which achieved excellent practical benefits and had great practical application potential. We hope that it can provide new ideas for advanced oxidation processes (AOPs) applying for wastewater treatment in the future.

Layered double hydroxides functionalized by carbonaceous materials: from preparation to energy and environmental applications

Along with the exponential demand for energy and pollution-free-environment, layered double hydroxides (LDHs) have gained extensive explorations because of their diverse nanostructures and tunable elemental compositions. However, the applications of LDHs are hindered by their poor activity, sluggish mass transfer, and aggregation. LDHs functionalized by carbonaceous materials (CMs) (LDH-CM) are expected to overcome the above disadvantages and even generate more excellent performance. This review first analyzes the research evolvement of LDH-CM composites during the past 25 years. Next, the advantages of LDH-CM composites are highlighted, such as morphology optimization, high electrical conductivity, more stable, good heat, and mass transfer performance. Following the synthetic strategies, including chemical assembly of LDHs and CMs, direct growth of LDH on CMs (two-step nucleation and growth and surface-confined growth) and direct CM formation on LDHs are fully discussed. Then, the recent progress achieved in LDH-CM composites for the application of energy storage and environmental protection is summarized in detail. In particular, the review illustrates the reasons why these constructing strategies can improve the performance of LDH-CM composites. Finally, challenges and future research prospects of LDH-CM composites are highlighted.

Two-step pyrolysis biochar derived from agro-waste for antibiotics removal: Mechanisms and stability

This study used acetone washing biochar (BCA) and nitric-acid washing biochar (BCN) derived from bagasse to remove sulfamethoxazole (SMX) and tetracycline (TC) in water. Higher specific surface area (1119.53 m² g^-1) and graphitization degree can significantly improve decontamination efficacy, of which BCN has the highest SMX and TC sorption capacities (274.63 mg g^-1 and 353.85 mg g^-1). The kinetics, isotherms and characterization analysis indicated O-containing functional group complexation and π-π interaction were dominant mechanisms in the adsorption process. Adsorption stability experiment showed that BCA has better stability with the coexistence of anions and cations. Besides, the enhancement and competitive adsorption from the interaction between soluble organic matter and TC could facilitate TC decontamination. Therefore, bagasse biochar derived from agro-waste has a promising potential for antibiotic contaminants removal from multi-interference conditions and promotes the recycling of waste, thereby achieving harmony between materials and the ecological environment.

Performance and mechanism of sycamore flock based biochar in removing oxytetracycline hydrochloride

In this study, sycamore flocs (SF), which caused environmental and health problems, were utilized to prepare biochar. SFB_2-900 obtained under the conditions of activation agent K₂CO₃, pyrolysis temperature 900℃ and m(K₂CO₃):m(BC) 2 had the strongest adsorption capacity (730 mg/g) for oxytetracycline hydrochloride (OTC-HCl). The pseudo-second-order kinetic model and Langmuir model described the adsorption kinetics and isotherms best. SFB_2-900 exhibited high OTC-HCl adsorption capacity in both higher ionic strength and wide pH range. The theoretical simulation indicated that the closest interaction distance between OTC-HCl and SFB_2-900 was 2.44 Å via π-π stacking configuration. Pore filling, π-π electron donor acceptor (EDA) interaction, H-bonding and electrostatic interactions were also involved in the process of OTC-HCl removal. SFB_2-900 showed great removal efficiency for OTC-HCl in different water matrices and good regeneration ability. This study solved the problems caused by SF, realized waste biomass recycling, and achieved preparing high-efficient adsorbent for antibiotic.

Preparation of carbonyl, hydroxyl, and amino-functionalized microporous carbonaceous nanospheres from syrup-based waste to remove sulfamethazine

Sulfadiazine (SDZ) was a persistent sulfonamide antibiotic with a potential risk to human health. The waste dipping syrup was considered useless and environmentally unfriendly solution. In this work, carbonyl-, hydroxyl-, and amino-functionalized microporous carbonaceous nanospheres were synthesized using waste dipping syrup with glucose, fructose, and nitrogen, which was used as precursor for hydrothermal and pyrolysis process. The products were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transformed infrared spectroscopy (FTIR), the point of zero charge (PZC), Xray photoelectron spectroscopy (XPS), and Brunauer-Emmett-Teller (BET). The carbonaceous nanospheres with large BET surface area (924.528 m²/g), micropores (2.127 nm), and high micro-porosity (89.54 %) allowed the rapid diffusion of SDZ (0.512nm×0.738 nm) into micropores of nanospheres. The majority SDZ (initial concentration = 20 mg/L) was removed (>96.8%) in the presence of 1.0 g/L nanoparticles after 40-min reaction at pH = 6.0. The adsorption capacity of SDZ onto nanospheres was 96.6 mg/g. The adsorption kinetic and equilibrium followed pseudo-first-order model and Langmuir isotherm, respectively. The intra-particle diffusion model indicated a three-step adsorption process. In addition, the regenerated nanospheres could be reused over four recycles. The optimal fabrication was realized at lower hydrothermal and pyrolysis temperature of 180 °C and 400 °C, respectively, which involved no additional chemical activating agent and had a high yield (70.8 %). Collectively, hydroxylation, carboxylation, amination, large specific surface area, and multi-microporosity may be responsible for improved adsorption performance of SDZ onto nanospheres. The findings provided a novel pathway for SDZ-loading wastewater treatment using waste syrup.

Microbially-mediated synthesis of activated carbon derived from cottonseed husks for enhanced sulfanilamide removal

This study provided a novel pathway to develop activated carbon with enhanced adsorption performance via feedstock pretreatment by fungi. The growth of Pleurotus ostreatus on cottonseed husks offered this feedstock an advantageous pore size for porous carbon making. The prepared activated carbons derived from cottonseed husks (CSH-ACs) during different fungal growth periods exhibited extraordinary performance than commercial activated carbon for sulfanilamide adsorptive removal. Their experimental data of adsorption capacities for sulfanilamide were 139.43, 146.15, and 146.16 mg g^-1, respectively. The adsorption behaviors of sulfanilamide on CSH-ACs were evaluated by kinetic, isotherm and thermodynamic models. Pore filling, hydrogen-bond forming and π-π staking interactions all contributed to the rapid sulfanilamide removal. The microporous-mesoporous structure, stronger hydrophilicity, and richer functional groups moieties owing to the lignocellulose decomposition in the plant wall significantly strengthened the adsorption process on the microbial-mediated activated carbon. The effects of pH and water impurities (H₂PO₄^-, CO₃^2-, SO₄^2-, Cl^-, and humic acid) on sulfanilamide removal were investigated by a single factor experimental design. Results indicated that CSH-ACs were suitable for sulfanilamide removal in actual wastewater treatment with wide pH adaptability and resilience to interference.

Adsorption behavior and mechanism of sulfonamides on controllably synthesized covalent organic frameworks

In this work, four kinds of covalent organic framework (COF) materials (TpPa-1, TpBD, TpDT, and TFBBD) with different pore sizes or functional groups were synthesized by an ultrasonic method for the adsorption of five sulfonamides. Optimization experiments regarding the adsorption time, vortex speed, and pH were carried out to improve adsorption efficiency. In addition, kinetic and thermodynamic experiments were conducted to explore the adsorption mechanism of the sulfonamides on the different COFs. The adsorption processes of the five sulfonamides on the four COFs fit the pseudo-second-order kinetic model and Langmuir adsorption isotherm model. Additionally, pore filling, hydrogen bond interactions, and electrostatic attraction were found to be the main adsorption mechanisms.

Introduction of N-containing moieties by ammonia plasma technique can substantially improve ciprofloxacin removal by biochar and the associated mechanisms: Spectroscopic and site energy distribution analysis

A low-temperature plasma device was developed to introduce N-containing moieties into biochar type CS-300 to improve ciprofloxacin removal. The sorption capacity of ciprofloxacin by the treated biochars was 2.61-4.26 times that of CS-300, and the mechanisms were explained by X-ray photoelectron spectroscopy and site energy distribution analysis. The results showed that the π-π stacking mechanism dominated ciprofloxacin removal by biochars. Ammonia-plasma treatment introduced abundant amino and amide groups to CS-300. They increased the π electron density in the delocalized system in CS-300, thus enhancing ciprofloxacin removal by the π-π stacking mechanism. Plasma treatment also enhanced polar interactions between ciprofloxacin and CS-300 through hydrogen- and ionic bonding occurring at high-energy sites with energy over 10,000 J/mol, thereby increasing ciprofloxacin removal. The maximum removal efficiency of ciprofloxacin by the treated biochars reached 71.0-85.7% at pH 6, while that for CS-300 was only 31.6% and occurred at pH 4. This implied that plasma treatment not only greatly increased the maximum removal efficiency but also shifted the optimal pH from acidic to nearly-neutral condition. Our findings highlight that ammonia-plasma treatment is a promising technique to improve ciprofloxacin removal by biochars and the treated biochars have potential applications in its removal from water.

Antibiotics and antibiotic resistance genes in landfills: A review

Landfill are important reservoirs of antibiotics and antibiotic resistance genes (ARGs). They harbor diverse contaminants, such as heavy metals and persistent organic chemicals, complex microbial consortia, and anaerobic degradation processes, which facilitate the occurrence, development, and transfer of ARGs and antibiotic resistant bacteria (ARB). The main concern is that antibiotics and developed ARGs and ARB may transfer to the local environment via leachate and landfill leakage. In this paper, we provide an overview of established studies on antibiotics and ARGs in landfills, summarize the origins and distribution of antibiotics and ARGs, discuss the linkages among various antibiotics, ARGs, and bacterial communities as well as the influencing factors of ARGs, and evaluate the current treatment processes of antibiotics and ARGs. Finally, future research is proposed to fill the current knowledge gaps, which include mechanisms for the development and transmission of antibiotic resistance, as well as efficient treatment approaches for antibiotic resistance.

Preparation and characterization of a newly constructed multifunctional Co(ii)–organic framework: proton conduction and adsorption of Congo red in aqueous medium

The efficient adsorption of CR over Co-MOF 1 as well as the pH-dependent proton-conducting mechanism of the composite Co-MOF–Nafion membrane.

How β-cyclodextrin- loaded mesoporous SiO2 nanospheres ensure efficient adsorption of rifampicin

In this study, β-CD@mesoporous SiO₂ nanospheres (β-CD@mSi) were prepared by loading β-cyclodextrin (β-CD) onto mesoporous silica nanospheres through an in situ synthesis. This not only solved the defect of β-CD being easily soluble in water, but also changed the physical structure of the mesoporous silica nanospheres. FTIR and XPS results showed that β-CD was successfully loaded onto mesoporous silica nanospheres (mSi), while enhancing the adsorption effect. β-CD@mSi with a monomer diameter of about 150 nm were prepared. At a temperature of 298k, the removal efficiency of a 100 mg/L solution of rifampicin can reach 90% in 4 h and the adsorption capacity was 275.42 mg g^-1 at high concentration. Through the calculation and analysis of adsorption kinetics, adsorption isotherms and adsorption thermodynamics based on the experimental data, the reaction is a spontaneous endothermic reaction dominated by chemical adsorption. The electron transfer pathway, structure-activity relationship and energy between β-CD@mSi and rifampicin were investigated by quantum chemical calculations. The accuracy of the characterization test results to judge the adsorption mechanism was verified, to show the process of rifampicin removal by β-CD@mSi more clearly and convincingly. The simulation results show that π-π interaction plays a major interaction in the reaction process, followed by intermolecular hydrogen bonding and electrostatic interactions.

Valorisation of agricultural waste derived biochars in aquaculture to remove organic micropollutants from water - experimental study and molecular dynamics simulations

In this work, we evaluated the valorisation of agricultural waste materials by transforming coconut husks and shells, corncobs and rice straw into biochar for water treatment in aquaculture. We compared the biochars' suitability for removal of organic micropollutants (acetaminophen, oxytetracycline, tetracycline, enrofloxacin, atrazine, diuron and diclofenac) from surface water needed for aquaculture. The biochars were prepared by three methods ranging from inexpensive drum kilns (200 °C) to pyrolysis with biogasfication (350-750 °C). Overall, antibiotics tetracycline and enrofloxacin were the most strongly sorbed micropollutants, and coconut husk biochar prepared at 750 °C was the best sorbent material. Molecular Dynamics simulations indicated that the major sorption mechanism is via π-π stacking interactions and there is a possibility of multilayer sorption for some of the micropollutants. We observed, a strong impact of ionic strength (salinity), which is an important consideration in coastal aquaculture applications. High salinity decreased the sorption for antibiotics oxytetracycline, tetracycline and enrofloxacin but increased diclofenac, atrazine and diuron sorption. We considered coconut husk biochar produced in drum kilns the most practical option for biochar applications in small-scale coastal aquacultures in South Asia. Pilot trials of canal water filtration at an aquaculture farm revealed that micropollutant sorption by coconut husk biochar under real-world conditions might be 10-500 times less than observed in the laboratory studies. Even so, biochar amendment of sand enhanced the micropollutant retention, which may facilitate subsequent biodegradation and improve the quality of brackish surface water used for food production in coastal aquaculture.

Optimizing environmental pollution controls in response to textile dyeing sludge, incineration temperature, CaO conditioner, and ash minerals

The dynamics of heavy metal speciation and flue gas emissions during the incineration of textile dyeing sludge (TDS) were quantified as a function of four addition levels of CaO, incineration temperature, and ash minerals using thermogravimetric analysis and experimental tube furnace. The TDS incineration was most improved with the addition of 10% CaO. The increased fractions of CaO coupled with the ash minerals changed the retention behaviors of eight heavy metals. The CaO addition increased the Cu, Zn, As, and Pb retentions, did not significantly change Cr, Mn, and Cd, but decreased the Ni retention. The CaO addition enhanced the speciation stability of Cu and transferred the Cr, Cd, and As speciations to the mobile fractions. The increased temperature weakened the Zn and Pb retentions and the speciation stabilities of As and Pb and turned the Cr, Mn, Ni, Cu, Zn, and Cd speciations into the stable fractions. The CaO addition inhibited HCN, NO, NO₂, COS, SO₂, CS₂, and SO₃ emissions from the TDS incineration. Neural network-based multi-response optimization was implemented to determine the optimal operational temperature for the TDS incineration and the reduction of the 12 gas emissions. The range of 640-755 °C with(out) 5% CaO appeared to be most beneficial in terms of both environmental quality and economic efficiency.

Defect Engineering in Metal‒Organic Frameworks as Futuristic Options for Purification of Pollutants in an Aqueous Environment

Clean water scarcity is becoming an increasingly important worldwide issue. The water treatment industry is demanding the development of novel effective materials. Defect engineering in nanoparticles is among the most revolutionary of technologies. Because of their high surface area, structural diversity, and tailorable ability, Metal‒Organic Frameworks (MOFs) can be used for a variety of purposes including separation, storage, sensing, drug delivery, and many other issues. The application in wastewater treatment associated with water stable MOF‒based materials has been an emerging research topic in recent decades. Defect engineering is a sophisticated technique used to manufacture defects and to change the geometric framework of target compounds. Since MOFs have a series of designable structures and active sites, tailoring properties in MOFs by defect engineering is a novel concept. Defect engineering can excavate hidden active sites in MOFs, which can lead to better performance in many fields. Therefore, this technology will open new opportunities in water purification processes. However, there has been little effort to comprehensively discuss this topic. In this review, we provide an overview of the development of defect engineered MOFs for water purification processes. Furthermore, we discuss the potential applications of defect engineered materials.

Novel sodium bicarbonate activation of cassava ethanol sludge derived biochar for removing tetracycline from aqueous solution: Performance assessment and mechanism insight

NaHCO₃ was used as a novel activator to produce cassava ethanol sludge-based biochar. The NaHCO₃-activated biochar showed superior adsorption capacity for tetracycline (154.45 mg/g) than raw biochar (34.04 mg/g). Orthogonal experiments confirmed the optimal preparation conditions of biochar. Increasing adsorbent dosage and temperature facilitated tetracycline removal. The maximum removal was 92.60% at pH = 3.0. Calcium ions and alkalinity decreased tetracycline removal. The time for attaining equilibrium was extended with increasing tetracycline concentration, but the equilibrium could be completed within 24 h. Langmuir model fitted the equilibrium data well. Kinetics process followed the Elovich model. The adsorption rate was controlled by both intraparticle and liquid film diffusion and the process was endothermic and spontaneous. The electrostatic attraction, hydrogen bonding, π-π interactions, and pore-filling were involved in the adsorption mechanism. The findings may provide an underlying guide for sludge disposal and removal of tetracycline from wastewater in practical application.

Photochemical reactivity of nitrogen-doped biochars under simulated sunlight irradiation: Generation of singlet oxygen

This study explored the photochemical activity of nitrogen-doped biochars (NCMs) by investigating their role in the degradation of sulfamethazine under simulated sunlight irradiation. NCMs with different doping amounts were prepared from corn straw and urea. Results showed that nitrogen doping can notably enhance the photodegradation of SMT rather than raw char. NCMs are of photochemical activity under visible light, which was confirmed by monochromatic light experiments. Quenching experiments, ESR, pH effect, and the influence of O₂ were carried out to explore the involved oxidation mechanism in this system. Results showed that ¹O₂ was the main reactive oxygen species. ¹O₂ was produced from O₂ by both energy transfer and electron transfer. DFT calculations showed that pyridinic N doping can decrease the energy of intersystem crossing and thus benefit the generation of ¹O₂ by triplet-triplet energy transfer. Results underscore the explicit importance of nitrogen element in photochemical reactivity of chars under simulated light irradiation even when the nitrogen content is low. It is a meaningful reminder for us to pay more attention to the assessment of the fate and transport of contaminants in the soil where it is rich in NCMs as well as the potential use of NCMs for pollutants remediation, since visible light is very abundant near the earth's surface.

Rational design of built-in stannic oxide-copper manganate microrods p-n heterojunction for photoelectrochemical sensing of tetracycline

Tetracycline (TC), a popularly found drug pollutant, can be contaminated in food and aquatic regions and causes a severe impact on human health. In this research, a visible light active p-stannic oxide/n-copper manganate (p-SnO₂/n-CuMnO₂) heterojunction was synthesized and has been applied for a signal on photoelectrochemical sensing of antibiotic TC. Firstly, the n-SnO₂ microrods were synthesized via a simple and efficient homogeneous precipitation method and the p-CuMnO₂ nanoparticles were synthesized by a facile ultrasound-assisted hydrothermal method. The SnO₂/CuMnO₂ microrods p-n heterojunction was prepared through a simple impregnation method and physicochemical properties of the microrods are characterized by using X-ray diffraction (XRD), Raman, Brunauer-Emmett-Teller (BET), Fourier-transform infrared (FTIR), UV-Vis diffuse reflectance spectroscopy (UVDRS), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and Mott-Schottky analyses. The photoelectrochemical sensing performance of SnO₂/CuMnO₂ microrods was 2.7 times higher than that of as-synthesized pure SnO₂ microrods is due to the more visible light absorption ability and p-n heterojunction (synergy). The designed SnO₂/CuMnO₂/ITO sensor gives photocurrent signals for the detection of TC in the range of 0.01-1000 μM with the detection limit (LOD) of 5.6 nM. The practical applicability of the sensor was monitored in cow milk and the Taipei River water sample.

Catalyst-free activation of permanganate under visible light irradiation for sulfamethazine degradation: Experiments and theoretical calculation

In this study, visible light (VL) was adopted for permanganate (PM) activation without additional catalyst, where sulfamethazine (SMT) was selected as the probe compound. Experiment results showed that the VL/PM system can effectively degrade SMT through pseudo-first-order reaction kinetics. Influencing factors including PM dosage, solution pH, humid acid (HA) and coexisting anions (CO₃^2-, SO₄^2-, Cl^- and NO₃^-) which affect SMT photo-degradation were also examined. Pyrophosphate (PP) had an inhibitory effect on SMT degradation due to the complexation of PP with Mn (III). Electron spin resonance (ESR) spectrometry and UV-Vis spectrophotometer proved that VL can activate PM to generate ·O₂^- and Mn (III) reactive species. Furthermore, based on the active site prediction, intermediates identification and Density Functional Theory (DFT) calculation, two main degradation pathways involving SMT molecular rearrangement and cleavage of S-N bond were proposed. Moreover, the energy barriers of the two degradation pathways were also calculated. This study offers a novel approach for aqueous SMT removal and deepens our understanding of the degradation mechanism of SMT through DFT calculation, which hopes to shed light on the future development of VL/PM treatment.