Impact of algal organic matter released from Microcystis aeruginosa and Chlorella sp. on the fouling of a ceramic microfiltration membrane

Effects of clarithromycin exposure on the growth of Microcystis aeruginosa and the production of algal dissolved organic matter

Antibiotics are commonly found in the aquatic environment, which can affect microbial community compositions and activities, and even have potential adverse impacts on human and ecosystem health. The current understanding of the effects of antibiotics on microalgae growth and algal dissolved organic matter (DOM) remains indistinct. To understand the toxic effects of antibiotics on the microalgae, Microcystis aeruginosa was exposed to clarithromycin (CLA) in this study. Cell density determination, chlorophyll content determination, and organic spectrum analysis were conducted to show the effect of CLA exposure on the growth, photosynthetic activity, and organic metabolic processes of Microcystis aeruginosa. The findings revealed that the physiological status of algae could be significantly influenced by CLA exposure in aquatic environments. Specifically, exposure to 1 μg/L CLA stimulated the growth and photosynthetic activity of algal cells. Conversely, CLA above 10 μg/L led to the inhibition of algal cell growth and photosynthesis. Notably, the inhibitory effects intensified with the increasing concentration of CLA. The molecular weight of DOM produced by Microcystis aeruginosa increased when exposed to CLA. Under the exposure of 60 μg/L CLA, a large number of algal cells ruptured and died, and the intracellular organic matter was released into the algal liquid. This resulted in an increase in high molecular weight substances and soluble microbial-like products in the DOM. Exposure to 1 and 10 μg/L CLA stimulated Microcystis aeruginosa to produce more humic acid-like substances, which may be a defense mechanism against CLA. The results were useful for assessing the effects of antibiotic pollution on the stability of the microalgae population and endogenous DOM characteristics in aquatic ecosystems.

Feasibility and mechanism of removing Microcystis aeruginosa and degrading microcystin-LR by dielectric barrier discharge plasma

Harmful cyanobacterial bloom is one of the serious environmental problems worldwide. Microcystis aeruginosa is a representative harmful alga in cyanobacteria bloom. It is of great significance to develop new technologies for the removal of Microcystis aeruginosa and microcystins. The feasibility and mechanism of removing microcystis aeruginosa and degrading microcystins by dielectric barrier discharge (DBD) plasma were studied. The suitable DBD parameters obtained in this study are DBD (41.5 W, 40 min) and DBD (41.5 W, 50 min), resulting in algae removal efficiency of 77.4% and 80.4%, respectively; scanning electron microscope and LIVE-DEATH analysis demonstrate that DBD treatment can disrupt cell structure and lead to cell death; analysis of elemental composition and chemical state indicated that there are traces of oxidation of organic nitrogen and organic carbon in microcystis aeruginosa; further intracellular ROS concentration and antioxidant enzyme activity analysis confirm that DBD damage microcystis aeruginosa through oxidation. Meanwhile, DBD can effectively degrade the microcystin-LR released after cell lysis, the extracellular microcystin-LR concentration in the DBD (41.5 W) group decreased by 88.7% at 60 min compared to the highest concentration at 20 min; further toxicity analysis of degradation intermediates indicated that DBD can reduce the toxicity of microcystin-LR. The contribution of active substances to the inactivation of microcystis aeruginosa is eaq- > •OH > H2O2 > O3 > 1O2 > •O2- > ONOO-, while on the degradation of microcystin-LR is eaq- > •OH > H2O2 > O3 > •O2- > 1O2 > ONOO-. The application of DBD plasma technology in microcystis aeruginosa algae removal and detoxification has certain prospects for promotion and application.

Elimination of Microcystis aeruginosa through Leuconostoc mesenteroides DH and its underlying mechanism

Microcystis aeruginosa is ubiquitously found in various water bodies and can produce microcystins (MCs), which threaten the health of aquatic animals and human beings. The elimination of excessive M. aeruginosa is beneficial for the protection of the ecosystems and public health. In this regard, algae-lysing bacteria have been extensively studied as an effective measure for their eradication. However, the active substances generated by algae-lysing bacteria are limited. For this study, we reveal that the phenyllactic acid (PLA) produced by Leuconostoc mesenteroides DH exhibits high efficacy for the removal of M. aeruginosa, and explore the elimination mechanism of strain DH on M. aeruginosa. It was found that a cell-free supernatant of strain DH possessed high removal activities against M. aeruginosa. Abundant reactive oxygen species were induced in algal cells following exposure to strain DH supernatant, as well as superoxide dismutase and catalase responses. Furthermore, the integrity of algal cell membranes and photosynthesis was seriously damaged. Interestingly, added exogenous eugenol significantly inhibited the synthesis of active substance produced by strain DH, which further identified that PLA is one of the active substances that contribute to the eradication of M. aeruginosa on the basis of metabolomics analysis. Our finding demonstrated, for the first time, that PLA (as an anti-cyanobacterial compound) can be used for the removal of M. aeruginosa, which provides a theoretical basis for the control of M. aeruginosa.

Effect of Membrane Pore Size on Membrane Fouling of Corundum Ceramic Membrane in MBR

Ceramic membrane has emerged as a promising material to address the membrane fouling issue in membrane bioreactors (MBR). In order to optimize the structural property of ceramic membrane, four corundum ceramic membranes with the mean pore size of 0.50, 0.63, 0.80, and 1.02 μm were prepared, which were designated as C5, C7, C13, and C20, respectively. Long-term MBR experiments showed that the C7 membrane with medium pore size experienced the lowest trans-membrane pressure development rate. Both the decrease and increase of membrane pore size would lead to more severe membrane fouling in the MBR. It was also interesting that with the increase of membrane pore size, the relative proportion of cake layer resistance in total fouling resistance was gradually increased. The content of dissolved organic foulants (i.e., protein, polysaccharide and DOC) on the surface of C7 was quantified as the lowest among the different ceramic membranes. Microbial community analysis also revealed the C7 had a lower relative abundance of membrane fouling associated bacteria in its cake layer. The results clearly demonstrated that ceramic membrane fouling in MBR could be effectively alleviated through optimizing the membrane pore size, which was a key structural factor for preparation of ceramic membrane.

Separation of Bioproducts through the Integration of Cyanobacterial Metabolism and Membrane Filtration: Facilitating Cyanobacteria's Industrial Application

In this work, we propose the development of an efficient, economical, automated, and sustainable method for separating bioproducts from culture medium via the integration of a sucrose-secreting cyanobacteria production process and pressure-driven membrane filtration technology. Firstly, we constructed sucrose-secreting cyanobacteria with a sucrose yield of 600-700 mg/L sucrose after 7 days of salt stress, and the produced sucrose could be fully separated from the cyanobacteria cultures through an efficient and automated membrane filtration process. To determine whether this new method is also economical and sustainable, the relationship between membrane species, operating pressure, and the growth status of four cyanobacterial species was systematically investigated. The results revealed that all four cyanobacterial species could continue to grow after UF filtration. The field emission scanning electron microscopy and confocal laser scanning microscopy results indicate that the cyanobacteria did not cause severe destruction to the membrane surface structure. The good cell viability and intact membrane surface observed after filtration indicated that this innovative cyanobacteria-membrane system is economical and sustainable. This work pioneered the use of membrane separation to achieve the in situ separation of cyanobacterial culture and target products, laying the foundation for the industrialization of cyanobacterial bioproducts.

Mineralization, characteristics variation, and removal mechanism of algal extracellular organic matter during vacuum ultraviolet/ozone process

Extracellular organic matter (EOM) produced by algal blooms in source water is detrimental to drinking water treatment processes and supplied water quality. Ozonation has been used to treat algal EOM, but it could not mineralize EOM effectively. In this study, mineralization and characteristics variation of EOM by vacuum ultraviolet/ozone (VUV/O₃) and its sub-processes were comprehensively investigated. Results showed that EOM removal in different processes followed the order of VUV/O₃ > UV/O₃ > O₃ > VUV > UV. For VUV/O₃ process, removal efficiencies of dissolved organic carbon (DOC), UV₂₅₄, protein, and polysaccharide at 50 min were 75.6%, 80.8%, 80.1%, and 78.0%, respectively, and fluorescence components received very high removal rates (≥92.8%, at 10 min). The yield of trichloromethane dropped from 102.0 to 30.1 μg/L after treating for 50 min by VUV/O₃. Besides, effects of O₃ dosage, initial pH, and water matrices on EOM removal in VUV/O₃ process were investigated. Moreover, fluorescent molecular probe experiments confirmed that hydroxyl radical and superoxide radical were the main reactive oxygen species (ROS) in VUV/O₃ process, and the transformation of ROS was proposed. The mechanism of EOM removal by VUV/O₃ included VUV photolysis, direct O₃ oxidation, and ROS oxidation. Furthermore, the removal of EOM in filtered water by VUV/O₃ was satisfactory. All results indicated that VUV/O₃ process had great application potential in treating EOM-rich filtered water.

Physiological, biochemical and transcriptional responses of cyanobacteria to environmentally relevant concentrations of a typical antibiotic-roxithromycin

The frequent occurrence of antibiotics in source waters may affect the formation of harmful algal blooms (HABs) dominated by the cyanobacterium Microcystis aeruginosa. However, it remains poorly understood whether dissolved algal organic matters (AOM) can be altered by the introduction of antibiotics in source waters. To resolve these discrepancies, this study investigated the physiological, biochemical, and transcriptional responses of a toxigenic strain of M. aeruginosa to the commonly-detected antibiotic roxithromycin (ROX) at environmentally relevant concentrations ranging from 30 to 8000 ng L^-1. The growth and microcystin (MC) production of M. aeruginosa was significantly stimulated by 300 and 1000 ng L^-1 ROX, whereas inhibited by 5000 and 8000 ng L^-1 ROX. This may be owing to the regulation of genes related to photosynthesis and MCs. Although the membrane of cyanobacterial cells remained intact, the release of MCs was increased significantly with the growing ROX dosages, which may cause additional challenges in drinking water treatment. The amounts of AOM were enhanced by 300 and 1000 ng L^-1 ROX, while decreased by 5000 and 8000 ng L^-1 ROX. It may be attributed to the changes of cyanobacterial cell growth and the gene expression related to carbon fixation, carbohydrate metabolism and nitrogen metabolism. To further understand the regulation of related genes in M. aeruginosa exposed to ROX, trend analysis of differentially expressed genes was performed. The results indicated that the regulation of metabolism-related genes (e.g., lipopolysaccharide biosynthesis) may be also responsible for the changes of cyanobacterial cell densities. Generally, low levels of ROX (300 and 1000 ng L^-1) could stimulated the cyanobacterial growth, MC synthesis and AOM production, which may promote the formation of HABs and reduce the source water quality. Although higher levels of ROX (5000 and 8000 ng L^-1) inhibited the formation of HABs, the threat of increasing extracellular MCs should be considered.

Elimination of Microcystis aeruginosa in water via dielectric barrier discharge plasma: Efficacy, mechanism and toxin release

Microcystis aeruginosa (M. aeruginosa), as the representative hazardous algae in cyanobacteria blooms, has long posed a threat to aquatic ecosystems. Here, a self-cooling dielectric barrier discharge plasma (DBDP) reactor was used to eliminate M. aeruginosa in water. The removal efficiency and mechanism of DBDP for M. aeruginosa and its toxin release during the treatment process was investigated. The results showed that over 99% of M. aeruginosa cells were removed by DBDP over 60 min under optimal conditions, and treated M. aeruginosa lost their ability to reproduce entirely. Reactive species generated in the self-cooling DBDP reactor damaged the membrane of M. aeruginosa, leading to leakage and degradation of dissolved organic matter. Increased intracellular reactive oxygen species accelerated the breakdown of protein and enzyme, and causes cell cytolysis. Eventually, M. aeruginosa was mineralized and lost its activity. The ·OH, ¹O₂ and ·O₂^- were crucial for inactivating M. aeruginosa. During the treatment process, the toxin microcystin-LR increased in the first 20 min, but declined over time: its concentration fell below 1 μg·mL^-1 after 60 min. This study provides insight into M. aeruginosa' s elimination in water by DBDP and has significant implications for developing a plasma technique to curtail cyanobacteria bloom.

Effect of seasonal succession of algal communities on fouling of MF membrane

An emerging threat to membrane application is the seasonal proliferation of algae in water sources such as rivers, reservoirs and lakes. This study investigated the link between feed parameters and the membrane performance of a pilot-scale microfiltration (MF) plant for 7 months. The seasonal succession of algae in relation to temperature dynamics was monitored. Temperature-dependent seasonal patterns for algae species were observed. The water temperatures during the dominance of cyanobacteria, especially Microcystis, were relatively higher (over 25 °C) than those during the dominance of diatoms. Diatoms did not much affect membrane performance (less than 0.2 kgf/cm²), however, under the cyanobacterial dominance condition, especially Microcystis sp., transmembrane pressure (TMP) reached up to the limited level (0.4 kgf/cm²) within one month. Concurrently UV absorbance at 254 nm wavelength and dissolved organic carbon values increased significantly during the Microcystis bloom and the build-up rate of TMP increased up to 0.005 kgf/cm²/day. Membrane autopsy also showed that during the dominance of diatom, application of cleaning agents can fully remove foulants on the membrane surface. However, during the dominance of cyanobacteria, there is a lot of Al, Si and organic complex on the fouled membrane, indicating the formation of Al-organic complexes that contributed to the residual membrane fouling. It is suggested that the irrecoverable fouling layer still contained some Al, mostly in complex with organics. Thus, organic matter originated from cyanobacteria may cause a serious impact on membrane fouling by forming the complex with metal ions originated from coagulant.

Membrane Fouling in Algal Separation Processes: A Review of Influencing Factors and Mechanisms

The use of algal biotechnologies in the production of biofuels, food, and valuable products has gained momentum in recent years, owing to its distinctive rapid growth and compatibility to be coupled to wastewater treatment in membrane photobioreactors. However, membrane fouling is considered a main drawback that offsets the benefits of algal applications by heavily impacting the operation cost. Several fouling control strategies have been proposed, addressing aspects related to characteristics in the feed water and membranes, operational conditions, and biomass properties. However, the lack of understanding of the mechanisms behind algal biofouling and control challenges the development of cost-effective strategies needed for the long-term operation of membrane photobioreactors. This paper reviews the progress on algal membrane fouling and control strategies. Herein, we summarize information in the composition and characteristics of algal foulants, namely algal organic matter, cells, and transparent exopolymer particles; and review their dynamic responses to modifications in the feedwater, membrane surface, hydrodynamics, and cleaning methods. This review comparatively analyzes (i) efficiency in fouling control or mitigation, (ii) advantages and drawbacks, (iii) technological performance, and (iv) challenges and knowledge gaps. Ultimately, the article provides a primary reference of algal biofouling in membrane-based applications.

Evaluating the effect of hydraulic retention time on fouling development and biomass characteristics in an algal membrane photobioreactor treating a secondary wastewater effluent

Coupling algal biomass growth to wastewater treatment is a promising alternative for the simultaneous removal and recovery of nutrients. This study aims to evaluate the effects of the Hydraulic Retention Time (HRT) on the fouling behavior and biomass characteristics of C. Vulgaris in a Membrane Photobioreactor (MPBR), fed with a secondary synthetic wastewater effluent. The changes in the algal cell characteristics and in their metabolic products were assessed at three different HRTs (12 h, 24 h and 36 h). Experimental results showed that higher loading rates led to a broader Particle Size Distribution (PSD) resulting from looser and less stable algal flocs. In contrast, bigger and homogeneously distributed particles observed at lower loading rates, led to a porous layer with lower fouling rates and organic removal. The presence of smaller particles and dissolved organics resulted in a more compact and less porous layer that increased the removal of small-MW organics.

New insights into membrane fouling by alginate: Impacts of ionic strength in presence of calcium ions

While water chemistry (e.g., ionic strength, calcium concentration and organic foulants) is the primary property of surface water, its effects on membrane fouling in process of membrane-based water production and seawater pretreatment have not well investigated. In this study, fouling behaviors of alginate solutions in presence of different calcium ion concentration and ionic strength levels were investigated. It was found that alginate solutions complexing with 1.5 mM calcium possessed a remarkably high specific filtration resistance (SFR) (above 3.596 × 10¹⁵ m kg^-1), and the SFR descended with calcium concentration and increased with ionic strength. A series of characterizations suggested that zeta potential, particle size, viscosity and morphology of alginate solutions were close related with foulant layer microstructure and these fouling behaviors. Based on these characterizations, the thermodynamics described by Flory-Huggins lattice theory was proposed to explain the remarkably high SFR of alginate gel for 1.5 mM calcium level. Meanwhile, preferential intermolecular coordination combined with Flory-Huggins lattice theory was suggested to be responsible for the descend trend of SFR with calcium concentration. Furthermore, electrostatic double layer compression effect together with Flory-Huggins lattice theory could well interpret the increase trend of SFR with ionic strength. This study provided the essential mechanisms underlying effects of ionic strength on alginate fouling in presence of calcium ions, and thus deepened understanding of membrane fouling.

Coagulation and disinfection by-products formation potential of extracellular and intracellular matter of algae and cyanobacteria

Coagulation and flocculation can remove particulate algal cells effectively; however, they are not very effective for removing dissolved algal organic matter (AOM) in drinking water plants. In this work, optimum coagulation conditions using alum for both extracellular and intracellular organic matter of six different algal and cyanobacterial species were determined. Different coagulation conditions such as alum dosage, pH, and initial dissolved organic carbon (DOC) were tested. Hydrophobicity, hydrophilicty, and transphilicity of the cellular materials were determined using resin fractionation method. The removal of DOC by coagulation correlated well with the hydrophobicity of the AOM. The disinfection by-product formation potential (DBPFP) of various fractions of AOM was determined after coagulation. Although, higher removal occurred for hydrophobic AOM during coagulation, specific DBPFP, which varied from 10 to 147 μg/mg-C was higher for hydrophobic AOM. Of all the six species, highest DBPFP occurred for Phaeodactylum tricornutum, an abundant marine diatom species, but is increasingly found in surface water.

Membrane fouling control by Ca2+ during coagulation-ultrafiltration process for algal-rich water treatment

Seasonal algal bloom, a water supply issue worldwide, can be efficiently solved by membrane technology. However, membranes typically suffer from serious fouling, which hinders the wide application of this technology. In this study, the feasibility of adding Ca²⁺ to control membrane fouling in coagulation-membrane treatment of algal-rich water was investigated. According to the results obtained, the normalized membrane flux decreased by a lower extent upon increasing the concentration of Ca²⁺ from 0 to 10 mmol/L. Simultaneously, the floc particle size increased significantly with the concentration of Ca²⁺, which leads to a lower hydraulic resistance. The coagulation performance is also enhanced with the concentration of Ca²⁺, inducing a slight osmotic pressure-induced resistance. The formation of Ca²⁺ coagulation flocs resulted in a looser, thin, and permeable cake layer on the membrane surface. This cake layer rejected organic pollutants and could be easily removed by physical and chemical cleaning treatments, as revealed by scanning electron microscopy images. The hydraulic irreversible membrane resistance was significantly reduced upon addition of Ca²⁺. All these findings suggest that the addition of Ca²⁺ may provide a simple-operation, cost-effective, and environmentally friendly technology for controlling membrane fouling during coagulation-membrane process for algal-rich water treatment.

Transport and retention of Microcystis aeruginosa in porous media: Impacts of ionic strength, flow rate, media size and pre-oxidization

Due to the climate change and human activity, the frequency and intensity of algal blooms have increased significantly. Recent studies have shown that during the bloom event, evaluated levels of cyanobacteria could infiltrate the drinking water treatment process and emerge in the filtered and disinfected water, thus threatening the safety of the drinking water supply. Among these concerned cyanobacteria, Microcystis aeruginosa is one of the most commonly detected species that cause algal bloom in a fresh water body. The present work was designed to investigate the transport and retention behaviour of Microcystis aeruginosa in a packed column to resolve the mechanisms that drive the transport behaviour of Microcystis under various operational conditions. The results showed that lab-cultured Microcystis aeruginosa could effectively break through the packed column regardless of ionic strength, media size or flow rate, as well as the presence of dissolved organic matter in the water under the conditions investigated. Such behaviour significantly contradicts those of fluorescent microspheres, which are commonly considered as ideal colloids. In addition, the combined impacts of pre-oxidation technologies and filtration on Microcystis aeruginosa removal were tested systematically. It was found that even the cells have been lysed/oxidized, no significant improvement of cell removals were observed in packed column. This paper provides a significant and comprehensive record of transport and retention behaviour of Microcystis aeruginosa in porous media. The results found herein suggest that in addition to the effort preventing toxin release/exposure during bloom events in source water, engineers and researchers should also pay attention to the transport and retention of Microcystis aeruginosa and other algal cells in filters to minimize the risk of breakthrough of cyanobacteria cells in the drinking water treatment process.

Environmental risks of ZnO nanoparticle exposure on Microcystis aeruginosa: Toxic effects and environmental feedback

The vast majority of studies measure the toxic effect of organisms exposed to nanoparticles (NPs) while there is still a lack of knowledge about the influence of NPs on the aquatic environment. It is unknown whether or not the interaction between NPs and algae will result in the variation of algal organic matter (AOM) and stimulate the production of more algal toxins. In this study, zinc oxide nanoparticles (nano-ZnO) as a typical representative of metal oxide NPs were used to evaluate the toxic effects and environmental feedback of Microcystis aeruginosa. Reactive oxygen species (ROS) and malondialdehyde (MDA) were measured to explain the toxicity mechanism. Changes of AOM, including the production of toxins, the molecular weight distribution and the excitation-emission matrices of algal solution were also studied as environmental feedback indicators after nano-ZnO destroyed the algae. As the nano-ZnO exceeded the comparable critical concentration (1.0 mg/L), the algae were destroyed and intracellular organic matters were released into the aquatic environment, which stimulated the generation of microcystin-LR (MC-LR). However, it is worth noting that the concentration of nano-ZnO would need to be high (at mg/L range) to stimulate more MC-LR production. These findings are expected to be beneficial in interpreting the toxicity and risks of the releasing of NPs through the feedback between algae and the aquatic environment.

A review of membrane fouling and its control in algal-related membrane processes

Membrane technologies have received much attention in microalgae biorefinery for nutrients removal from wastewater, carbon dioxide abatement from the air as well as the production of value-added products and biofuel in recent years. This paper provides a state-of-the-art review on membrane fouling issues and its control in membrane photobioreactors (MPBRs) and other algal-related membrane processes (harvesting, dewatering, and biofuel production). The mechanisms of membrane fouling and factors affecting membrane fouling in algal-related membrane processes are systematically reviewed. Also, strategies to control membrane fouling in algal-related membrane processes are summarized and discussed. Finally, the gaps, challenges, and opportunities in membrane fouling control in algal-related membrane technologies are identified and discussed.

Overvalued allelopathy and overlooked effects of humic acid-like substances on Microcystis aeruginosa and Scenedesmus obliquus competition

To form Microcystis blooms, Microcystis must be competitively dominant to other phytoplankton species to produce enough biomass. The aim of this study was to determine the competition mechanisms between Microcystis aeruginosa and Scenedesmus obliquus. M. aeruginosa and S. obliquus were separately cultured in the filtrate of mono and mixed cultures of M. aeruginosa and S. obliquus with varying treatments concerning N, P and iron availability. The inhibition rate for M. aeruginosa was 20-31% when cultured in mono and mixed culture filtrates enriched with N and P, but this rate was reduced to -15 to 19% when cultured in filtrates enriched with N, P and iron. The inhibition rate for M. aeruginosa decreased from 80 to 100% to 11-39% in dialytic filtrates. However, there were no differences in inhibition rate for S. obliquus, regardless of filtrate or dialytic filtrate treatments. The potential allelochemical, 2-butyl-octanol (0.144 mg L^-1), was found to have little inhibitory effect to M. aeruginosa or S. obliquus. Thus, previously reported allelopathy to Microcystis would be overestimated. We also report a new mechanism in phytoplankton competition in this study. The phytoplankton secreted humic acid-like substances that can reduce the bioavailability of iron, resulting in the inhibition of other phytoplankton.

Further insight into the roles of the chemical composition of dissolved organic matter (DOM) on ultrafiltration membranes as revealed by multiple advanced DOM characterization tools

This study assessed the relative contributions of different constitutes in dissolved organic matter (DOM) with two different sources (i.e., urban river and effluent) to membrane fouling on three types of ultrafiltration (UF) membranes via excitation emission matrix - parallel factor analysis (EEM-PARAFAC), size exclusion chromatography (SEC), and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS). Two polyethersulfone membranes with different pore sizes and one regenerated cellulose membrane were used as representative hydrophobic (HPO) and hydrophilic (HPI) UF membranes, respectively. Although size exclusion effect was found to be the most prevailing rejection mechanism, the behaviors of individual fluorescent components (one tryptophan-like, one microbial-humic-like, and terrestrial humic-like) and different size fractions upon the UF filtration revealed that chemical interactions (e.g., hydrophobic interactions and hydrogen bonding) between DOM and membrane might play important roles in UF membrane fouling, especially for small sized DOM molecules. Based on the molecular level composition determined by FT-ICR-MS, the CHOS formula group showed a greater removal tendency toward the HPO membrane, while the CHONS group was prone to be removed by the HPI membrane. The changes in the overall molecular composition of DOM upon UF filtration were highly dependent on the sources of DOM. The molecules of more acidic nature tended to remain in the permeate of effluent DOM, while the river DOM was shifted into more nitrogen-enriched composition after filtration. Regardless of the DOM sources, the HPO membrane with a smaller pore size led to the most pronounced changes in the molecular composition of DOM.

Membrane fouling by sodium alginate in high salinity conditions to simulate biofouling during seawater desalination

This study aims to better understand biofouling by algal organic matters (AOM) during seawater pretreatment by microfiltration (MF). To simulate AOM biofouling, sodium alginate (SA) solutions with three different concentrations (2, 20 and 50ppm) were filtered in dead-end mode with MF membrane. A modelling approach with blocking laws was used to identify the fouling mechanisms behind flux decline with time. The effect of SA concentration and cations such as Na⁺ (0.6M) and Ca²⁺ (0.015M) addition to SA solution on fouling mechanisms was studied. While for low SA concentration (2ppm), fouling occurs within two phases: a pore constriction phase followed by cake formation phase, for high SA concentration (50ppm), fouling occurs within only one phase controlled by cake formation. The addition of Na⁺ (0.6M) or Ca²⁺ (0.015M) to SA solution mitigates membrane fouling, however, the addition of both cations enhances fouling by formation of dense cake layer on membrane.

Microalgae Cultivation on Anaerobic Digestate of Municipal Wastewater, Sewage Sludge and Agro-Waste

Microalgae are fast-growing photosynthetic organisms which have the potential to be exploited as an alternative source of liquid fuels to meet growing global energy demand. The cultivation of microalgae, however, still needs to be improved in order to reduce the cost of the biomass produced. Among the major costs encountered for algal cultivation are the costs for nutrients such as CO₂, nitrogen and phosphorous. In this work, therefore, different microalgal strains were cultivated using as nutrient sources three different anaerobic digestates deriving from municipal wastewater, sewage sludge or agro-waste treatment plants. In particular, anaerobic digestates deriving from agro-waste or sewage sludge treatment induced a more than 300% increase in lipid production per volume in Chlorella vulgaris cultures grown in a closed photobioreactor, and a strong increase in carotenoid accumulation in different microalgae species. Conversely, a digestate originating from a pilot scale anaerobic upflow sludge blanket (UASB) was used to increase biomass production when added to an artificial nutrient-supplemented medium. The results herein demonstrate the possibility of improving biomass accumulation or lipid production using different anaerobic digestates.