Improvement of virus removal by pilot-scale coagulation-ultrafiltration process for wastewater reclamation: Effect of optimization of pH in secondary effluent

Viruses in Wastewater-A Concern for Public Health and the Environment

Wastewater monitoring provides essential information about water quality and the degree of contamination. Monitoring these waters helps identify and manage risks to public health, prevent the spread of disease, and protect the environment. Standardizing the appropriate and most accurate methods for the isolation and identification of viruses in wastewater is necessary. This review aims to present the major classes of viruses in wastewater, as well as the methods of concentration, isolation, and identification of viruses in wastewater to assess public health risks and implement corrective measures to prevent and control viral infections. Last but not least, we propose to evaluate the current strategies in wastewater treatment as well as new alternative methods of water disinfection.

Modelling and optimization of membrane process for removal of biologics (pathogens) from water and wastewater: Current perspectives and challenges

As one of the 17 sustainable development goals, the United Nations (UN) has prioritized "clean water and sanitation" (Goal 6) to reduce the discharge of emerging pollutants and disease-causing agents into the environment. Contamination of water by pathogenic microorganisms and their existence in treated water is a global public health concern. Under natural conditions, water is frequently prone to contamination by invasive microorganisms, such as bacteria, viruses, and protozoa. This circumstance has therefore highlighted the critical need for research techniques to prevent, treat, and get rid of pathogens in wastewater. Membrane systems have emerged as one of the effective ways of removing contaminants from water and wastewater However, few research studies have examined the synergistic or conflicting effects of operating conditions on newly developing contaminants found in wastewater. Therefore, the efficient, dependable, and expeditious examination of the pathogens in the intricate wastewater matrix remains a significant obstacle. As far as it can be ascertained, much attention has not recently been given to optimizing membrane processes to develop optimal operation design as related to pathogen removal from water and wastewater. Therefore, this state-of-the-art review aims to discuss the current trends in removing pathogens from wastewater by membrane techniques. In addition, conventional techniques of treating pathogenic-containing water and wastewater and their shortcomings were briefly discussed. Furthermore, derived mathematical models suitable for modelling, simulation, and control of membrane technologies for pathogens removal are highlighted. In conclusion, the challenges facing membrane technologies for removing pathogens were extensively discussed, and future outlooks/perspectives on optimizing and modelling membrane processes are recommended.

Photoaged microplastics enhanced the antibiotic resistance dissemination in WWTPs by altering the adsorption behavior of antibiotic resistance plasmids

Growing concerns have raised about the microplastic eco-coronas in the ultraviolet (UV) disinfection wastewater, which accelerated the pollution of antibiotic resistance genes (ARGs) in the aquatic environment. As the hotspot of gene exchange, microplastics (MPs), especially for the UV-aged MPs, could alter the spread of ARGs in the eco-coronas and affect the resistance of the environment through adsorbing antibiotic resistant plasmids (ARPs). However, the relationship between the MP adsorption for ARPs and ARG spreading characteristics in MP eco-corona remain unclear. Herein, this study explored the distribution of ARGs in the MP eco-corona through in situ investigations of the discharged wastewater, and the adsorption behaviors of MPs for ARPs by in vitro adsorption experiments and in silico calculations. Results showed that the adsorption capacity of MPs for ARPs was enhanced by 42.7-48.0 % and the adsorption behavior changed from monolayer to multilayer adsorption after UV-aging. It was related to the increased surface roughness and oxygen-containing functional groups of MPs under UV treatment. Moreover, the abundance of ARGs in MP eco-corona of UV-treated wastewater was 1.33-1.55 folds higher than that without UV treatment, promoting the proliferation of drug resistance. DFT and DLVO theoretical calculations indicated that the MP-ARP interactions were dominated by electrostatic physical adsorption, endowing the aged MPs with low potential oxygen-containing groups to increase the electrostatic interaction with ARPs. Besides, due to the desorption of ARPs on MPs driven by the electrostatic repulsion, the bioavailability of ARGs in the MP eco-coronas was increased with pH and decreased with salinity after the wastewater discharge. Overall, this study advanced the understanding of the adsorption behavior of MPs for ARPs and provided inspirations for the evaluation of the resistance spread in the aquatic environment mediated by MP eco-coronas.

Photocatalytic membrane coated with α-Fe2O3/Fe3O4 for enhanced filtration performance and antifouling property in surface water treatment

A photocatalytic membrane coated with α-Fe2O3/Fe3O4 nanoparticles has been developed to address the challenges of membrane fouling and organic removal in the treatment of natural surface water. The photocatalytic and filtration properties of the membranes were investigated through a variety of methods. The successful preparation of iron oxide was confirmed by UV-vis diffuse reflectance spectra and X-ray diffractometry, with α-Fe2O3 identified as the primary photocatalytic agent. A commercial ultrafiltration (UF) membrane was employed as a comparison to evaluate the photocatalytic performance and filtration properties of the modified membrane. Results showed that the photocatalytic membrane achieved better removal rates for UV254 (22.0%) and specific fluorescent organic compounds, such as component 2 (19.38%) and component 3 (16.89%), compared to the control group. Furthermore, both irreversible and reversible fouling resistances of the prepared membranes were significantly lower than that of the control group, with reductions of 39.4% and 50.2%, respectively. The membrane coated with α-Fe2O3/Fe3O4 nanoparticles exhibited moderate removal of protein-like and terrestrially derived humic-like fluorescent organics while controlling membrane fouling. Although the α-Fe2O3/Fe3O4 nanoparticles-coated photocatalytic membrane demonstrated good anti-fouling properties, the removals of organic matters were not as effective as anticipated due to the shorter hydraulic retention time. This study provides valuable insights for enhancing pollutant degradation and anti-fouling properties of membranes through the utilization of solar photocatalytic α-Fe2O3/Fe3O4 surface-modified membranes in the treatment of natural surface water.

In Vitro Viral Recovery Yields under Different Re-Suspension Buffers in Iron Flocculation to Concentrate Viral Hemorrhagic Septicemia Virus Genotype IVa in Seawater

Iron flocculation is widely used to concentrate viruses in water, followed by Fe-virus flocculate formation, collection, and elution. In the elution stage, an oxalic or ascorbic acid re-suspension buffer dissolved iron hydroxide. After the concentration of viral hemorrhagic septicemia virus (VHSV) in seawater (1 × 10¹ to 1 × 10⁵ viral genome copies or plaque-forming unit (PFU)/mL), the recovery yield of the viral genome using quantitative real-time PCR (qRT-PCR) and viral infectivity using the plaque assay were investigated to evaluate the validity of the two re-suspension buffers to concentrate VHSV. The mean viral genome recovery yield with oxalic and ascorbic acid was 71.2 ± 12.3% and 81.4 ± 9.5%, respectively. The mean viral infective recovery yields based on the PFU were significantly different between the two buffers at 23.8 ± 22.7% (oxalic acid) and 4.4 ± 2.7% (ascorbic acid). Notably, although oxalic acid maintains viral infectivity over 60% at a viral concentration above 10⁵ PFU/mL, the infective VHSVs were not sufficiently recovered at a low viral concentration (10² PFU/mL, <10%). To support this result, concentrated VHSV was inoculated in Epithelioma papulosum cyprini (EPC) cells to confirm cell viability, viral gene expression, and extracellular viral titer. All results demonstrated that oxalic acid buffer was superior to ascorbic acid buffer in preserving viral infectivity.

Ions play different roles in virus removal caused by different NOMs in UF process: Removal efficiency and mechanism analysis

In this study, we investigated the effect of different compositions of aquatic natural organic matter (NOM) and ions on virus removal by ultrafiltration (UF). MS2 bacteriophage was used as a surrogate. Humic acid (HA) improved the MS2 removal rate from 1.95 ± 0.09 LRV to 2.40 ± 0.03 LRV at the HA dosage of 9 mg/L through the combined mechanisms of size exclusion, electrostatic repulsion and hydrophobicity. MS2 removal rate further increased to 3.10 ± 0.05 LRV by 10 mmol/L Na⁺ dosage and 3.19 ± 0.12 LRV by Ca²⁺ 1 mmol/L in the HA-containing UF system. Size exclusion turned into the dominant virus removal mechanism according to the results of the fouling model fitting and the weakening of electrostatic repulsion and hydrophobicity. The complexation of Ca²⁺ also played a role in MS2 removal based on the analysis of interaction force. MS2 removal rate by bovine serum albumin (BSA) was poor, which was 2.07 ± 0.06 LRV at the BSA dosage of 9 mg/L. Hydrophobicity was greatly reduced and the dominant virus removal mechanisms were size exclusion and electrostatic repulsion. 10 mmol/L Na⁺ in the presence of BSA deteriorated MS2 removal rate to 2.02 ± 0.07 LRV by the weakening of electrostatic repulsion, hydrophobicity and size exclusion. Electrostatic repulsion severely decreased by 1 mmol/L Ca²⁺ and the enhanced adsorption barrier represented competitive adsorption of Ca²⁺ by BSA and MS2 contributed for MS2 removal further decline (1.99 ± 0.05 LRV). Complex components in water will have different effects on virus removal due to their properties and interactions. This study can provide references for selecting more efficient water treatment methods according to the different compositions of raw water in actual water treatment applications during the UF process. Moreover, the retention of virus by UF can be predicted based on our study results.

A critical review on the existing wastewater treatment methods in the COVID-19 era: What is the potential of advanced oxidation processes in combatting viral especially SARS-CoV-2?

The COVID-19 epidemic has put the risk of virus contamination in water bodies on the horizon of health authorities. Hence, finding effective ways to remove the virus, especially SARS-CoV-2, from wastewater treatment plants (WWTPs) has emerged as a hot issue in the last few years. Herein, this study first deals with the fate of SARS-CoV-2 genetic material in WWTPs, then critically reviews and compares different wastewater treatment methods for combatting COVID-19 as well as to increase the water quality. This critical review sheds light the efficiency of advanced oxidation processes (AOPs) to inactivate virus, specially SARS-CoV-2 RNA. Although several physicochemical treatment processes (e.g. activated sludge) are commonly used to eliminate pathogens, AOPs are the most versatile and effective virus inactivation methods. For instance, TiO₂ is the most known and widely studied photo-catalyst innocuously utilized to degrade pollutants as well as to photo-induce bacterial and virus disinfection due to its high chemical resistance and efficient photo-activity. When ozone is dissolved in water and wastewater, it generates a wide spectrum of the reactive oxygen species (ROS), which are responsible to degrade materials in virus membranes resulting in destroying the cell wall. Furthermore, electrochemical advanced oxidation processes act through direct oxidation when pathogens react at the anode surface or by indirect oxidation through oxidizing species produced in the bulk solution. Consequently, they represent a feasible choice for the inactivation of a wide range of pathogens. Nonetheless, there are some challenges with AOPs which should be addressed for application at industrial-scale.

Recent advances in aqueous virus removal technologies

The COVID-19 outbreak has triggered a massive research, but still urgent detection and treatment of this virus seems a public concern. The spread of viruses in aqueous environments underlined efficient virus treatment processes as a hot challenge. This review critically and comprehensively enables identifying and classifying advanced biochemical, membrane-based and disinfection processes for effective treatment of virus-contaminated water and wastewater. Understanding the functions of individual and combined/multi-stage processes in terms of manufacturing and economical parameters makes this contribution a different story from available review papers. Moreover, this review discusses challenges of combining biochemical, membrane and disinfection processes for synergistic treatment of viruses in order to reduce the dissemination of waterborne diseases. Certainly, the combination technologies are proactive in minimizing and restraining the outbreaks of the virus. It emphasizes the importance of health authorities to confront the outbreaks of unknown viruses in the future.

Removal of hazardous ions from aqueous solutions: Current methods, with a focus on green ion flotation

Hazardous ions, like those of heavy metals, cause significant health and environmental problems when they are discharged into water resources naturally or through various industrial processes. Removing these ions from water is of significant importance in the provision of high-quality water for drinking and agricultural usage. This work discusses current techniques that are frequently used for the removal of heavy-metal ions from aqueous solutions by absorption, particularly the use of biodegradable surfactants in ion flotation. Certain new surfactants promise high efficiency in their use in the ion-flotation process and in their application in industrial-water treatment to remove heavy metals. As an example, this work demonstrates the high efficiency of surfactants based on an amino-acid (L-cysteine) in removing a range of heavy-metal ions in a simple, single-stage ion-flotation process. High foaming ability, the ability to operate in various temperatures and pHs, decomposing into natural products and high binding affinity for heavy-metal ions make the cysteine-based surfactants a highly suitable compound to replace current commercial surfactants in ion- and froth-flotation processes. Removal of particular ions can also be achieved in ion flotation; a suitable choice of parameters, such as pH and surfactant concentration, favours the surfactant binding to those ions. Further intensive work is required to develop an optimal process to recover valuable elements from waste solutions.

Removal of emerging organic micropollutants via modified-reverse osmosis/nanofiltration membranes: A review

Hazardous micropollutants (MPs) such as pharmaceutically active compounds (PhACs), pesticides and personal care products (PCPs) have emerged as a critical concern nowadays for acquiring clean and safe water resources. In the last few decades, innumerable water treatment methods involving biodegradation, adsorption and advanced oxidation process have been utilized for the removal of MPs. Of these methods, membrane technology has proven to be a promising technique for the removal of MPs due to its sustainability, high efficiency and cost-effectiveness. Herein, the aim of this article is to provide a comprehensive review regarding the MPs rejection mechanisms of reverse osmosis (RO) and nanofiltration (NF) membranes after incorporation of nanomaterials and also surface modification atop the PA layer. Size exclusion, adsorption and electrostatic charge interaction mechanisms play important roles in governing the MP removal rate. In addition, this review also discusses the state-of-the-art research on the surface modification of thin film composite (TFC) membrane and nanomaterials-incorporated thin film nanocomposite (TFN) membrane in enhancing MPs removal performance. It is hoped that this review can provide insights in modifying the physicochemical properties of NF and RO membranes to achieve better performance in water treatment process, particularly for the removal of emerging hazardous substances.

Sources, fates and treatment strategies of typical viruses in urban sewage collection/treatment systems: A review

The ongoing coronavirus pandemic (COVID-19) throughout the world has severely threatened the global economy and public health. Due to receiving severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) from a wide variety of sources (e.g., households, hospitals, slaughterhouses), urban sewage treatment systems are regarded as an important path for the transmission of waterborne viruses. This review presents a quantitative profile of the concentration distribution of typical viruses within wastewater collection systems and evaluates the influence of different characteristics of sewer systems on virus species and concentration. Then, the efficiencies and mechanisms of virus removal in the units of wastewater treatment plants (WWTPs) are summarized and compared, among which the inactivation efficiencies of typical viruses by typical disinfection approaches under varied operational conditions are elucidated. Subsequently, the occurrence and removal of viruses in treated effluent reuse and desalination, as well as that in sewage sludge treatment, are discussed. Potential dissemination of viruses is emphasized by occurrence via aerosolization from toilets, the collection system and WWTP aeration, which might have a vital role in the transmission and spread of viruses. Finally, the frequency and concentration of viruses in reclaimed water, the probability of infection are also reviewed for discussing the potential health risks.

Tannin-based coagulants: Current development and prospects on synthesis and uses

Population growth, industrialization, urbanization, and agriculture lead to a decrease in the availability of clean water. Coagulation/flocculation is one of the most common operations in water, urban wastewater, and industrial effluents treatment systems. Usually, this process is achieved using conventional coagulants that have their performance affected by pH, are poorly biodegradable, produce a huge volume of sludge, and are associated with degenerative diseases. As a substitute for these chemicals, natural coagulants have been highly researched for the last ten/fifteen years, especially the tannin-based (TB) ones. This review paper highlights the advantages of using these greener products to treat different types of water, wastewater, and effluents, especially from dairy, cosmetics, laundries, textile, and other industries. TB coagulants can successfully remove turbidity, color, suspended solids, soluble organic (chemical/biochemical oxygen demand) and inorganic matter (total phosphate, and heavy metals), and microorganisms. TB coagulants are compatible with other treatment technologies and can be used as coagulant-aid to reduce the consumption of chemicals. TB coagulants can reduce operating costs of water treatment due to less alkalinity consumption, as pH adjustment is sometimes unnecessary, and the production of a smaller volume of biodegradable sludge. TB coagulants can be synthesized by valorizing wastes/by-products, from the bark of some specific trees and skins/pomace of different fruits and vegetables. The strengths, weaknesses, opportunities, and threats (SWOT) on TB coagulants are discussed. The progress of TB coagulants is promising, but some threats should be overcome, especially on tannin extraction and cationization. The market competition with conventional coagulants, the feasibility of application in real waters, and the reluctance of the industries to adapt to new technologies are other weaknesses to be surpassed.

Virus removal during sewage treatment by anaerobic membrane bioreactor (AnMBR): The role of membrane fouling

Anaerobic membrane bioreactor (AnMBR) is a low-energy and promising solution for sewage treatment. During the treatment, the fouled membrane of AnMBR is recognized as an important barrier against pathogenic viruses. Here, the role of membrane fouling of an AnMBR at room temperature in the virus removal was investigated using MS2 bacteriophage as a virus surrogate. Results revealed that the virus removal efficiency of AnMBR was in the range of 0.2 to 3.6 logs, gradually increasing with the course of AnMBR operation. Virus removal efficiency was found to be significantly correlated with transmembrane pressure (R²=0.92, p<0.01), especially in the rapid fouling stage, indicating that membrane fouling was the key factor in the virus removal. The proportion of virus decreased from 52.03% to 15.04% in the membrane foulants when membrane fouling was aggravating rapidly, yet increased from 0.74% to 21.52% in the mixed liquor. Meanwhile, the permeate flux dramatically dropped. These imply that the primary rejection mechanism of virus by membrane in the slow fouling stage is the virus adsorption onto membrane, while the sieving effect is the main reason in the rapid fouling stage. Ex-situ virus rejection test unveiled that the cake layer was the main contributor to the overall virus rejection, while the greatest resistance-specific virus rejection was provided by the organic pore blocking. This paper provides operation strategies to balance enhanced virus removal and high permeate flux by regulating the membrane fouling process.

Processing of natural fibre and method improvement for removal of endocrine-disrupting compounds

Persistent endocrine-disrupting compounds (EDCs) in bodies of water are a concern for human health and constitute an environmental issue, even if present in trace amounts. Conventional treatment systems do not entirely remove EDCs from discharge effluent. Due to the ultra-trace level of EDCs which affect human health and pose an environmental issue, developing new approaches and techniques to remove these micropollutants from the discharged effluent is vital. This review discusses the most common methods of eliminating EDCs through preliminary, primary, secondary and tertiary treatments. The adsorption process is favoured for EDC removal, as it is an economical and straightforward option. The NABC aspects, which are the need, approach, benefits and challenges, were analysed based on existing circumstances, highlighting biochar as a green and renewable adsorbent for the removal of organic contaminants. From the environmental point of view, the effectiveness of this method, which uses natural fibre from the kenaf plant as a porous and economical biochar material with a selected lignocellulosic biomass, provides insights into the advantages of biochar-derived adsorbents. Essentially, the improvement of the natural fibre as an adsorbent is a focus, using carbonisation, activation, and the physiochemical process to enhance the adsorption ability of the material for pollutants in bodies of water. This output will complement sustainable water management approaches presented in previous studies for combating the emerging pollutant crisis via novel green and environmentally safe options.

Recent advances in the biosensors application for the detection of bacteria and viruses in wastewater

The presence of disease-causing pathogens in wastewater can provide an excellent diagnostic tool for infectious diseases. Biosensors are far superior to conventional methods used for regular infection screening and surveillance testing. They are rapid, sensitive, inexpensive portable and carry no risk of exposure in their detection schemes. In this context, this review summarizes the most recently developed biosensors for the detection of bacteria and viruses in wastewater. The review also provides information on the new detection methods aimed at screening for SARS-CoV-2, which has now caused more than 4 million deaths. In addition, the review highlights the potential behind on-line and real-time detection of pathogens in wastewater pipelines. Most of the biosensors reported were not targeted to wastewater samples due to the complexity of the matrix. However, this review highlights on the performance factors of recently developed biosensors and discusses the importance of nanotechnology in amplifying the output signals, which in turn increases the accuracy and reliability of biosensors. Current research on the applicability of biosensors in wastewater promises a dramatic change to the conventional approach in the field of medical screening.

Comparative effectiveness of membrane technologies and disinfection methods for virus elimination in water: A review

The pandemic of the 2019 novel coronavirus disease (COVID-19) has brought viruses into the public horizon. Since viruses can pose a threat to human health in a low concentration range, seeking efficient virus removal methods has been the research hotspots in the past few years. Herein, a total of 1060 research papers were collected from the Web of Science database to identify technological trends as well as the research status. Based on the analysis results, this review elaborates on the state-of-the-art of membrane filtration and disinfection technologies for the treatment of virus-containing wastewater and drinking water. The results evince that membrane and disinfection methods achieve a broad range of virus removal efficiency (0.5-7 log reduction values (LRVs) and 0.09-8 LRVs, respectively) that is attributable to the various interactions between membranes or disinfectants and viruses having different susceptibility in viral capsid protein and nucleic acid. Moreover, this review discusses the related challenges and potential of membrane and disinfection technologies for customized virus removal in order to prevent the dissemination of the waterborne diseases.

Toward nanotechnology-enabled face masks against SARS-CoV-2 and pandemic respiratory diseases

Wearing a face mask has become a necessity following the outbreak of the coronavirus (COVID-19) disease, where its effectiveness in containing the pandemic has been confirmed. Nevertheless, the pandemic has revealed major deficiencies in the ability to manufacture and ramp up worldwide production of efficient surgical-grade face masks. As a result, many researchers have focused their efforts on the development of low cost, smart and effective face covers. In this article, following a short introduction concerning face mask requirements, the different nanotechnology-enabled techniques for achieving better protection against the SARS-CoV-2 virus are reviewed, including the development of nanoporous and nanofibrous membranes in addition to triboelectric nanogenerators based masks, which can filter the virus using various mechanisms such as straining, electrostatic attraction and electrocution. The development of nanomaterials-based mask coatings to achieve virus repellent and sterilizing capabilities, including antiviral, hydrophobic and photothermal features are also discussed. Finally, the usability of nanotechnology-enabled face masks is discussed and compared with that of current commercial-grade N95 masks. To conclude, we highlight the challenges associated with the quick transfer of nanomaterials-enabled face masks and provide an overall outlook of the importance of nanotechnology in counteracting the COVID-19 and future pandemics.

The novel SARS-CoV-2 pandemic: Possible environmental transmission, detection, persistence and fate during wastewater and water treatment

The contagious SARS-CoV-2 virus, responsible for COVID-19 disease, has infected over 27 million people across the globe within a few months. While literature on SARS-CoV-2 indicates that its transmission may occur predominantly via aerosolization of virus-laden droplets, the possibility of alternate routes of transmission and/or reinfection via the environment requires considerable scientific attention. This review aims to collate information on possible transmission routes of this virus, to ascertain its fate in the environment. Concomitant with the presence of SARS-CoV-2 viral RNA in faeces and saliva of infected patients, studies also indicated its occurrence in raw wastewater, primary sludge and river water. Therefore sewerage system could be a possible route of virus outbreak, a possible tool to assess viral community spread and future surveillance technique. Hence, this review looked into detection, occurrence and fate of SARS-CoV-2 during primary, secondary, and tertiary wastewater and water treatment processes based on published literature on SARS-CoV and other enveloped viruses. The review also highlights the need for focused research on occurrence and fate of SARS-CoV-2 in various environmental matrices. Utilization of this information in environmental transmission models developed for other enveloped and enteric viruses can facilitate risk assessment studies. Preliminary research efforts with SARS-CoV-2 and established scientific reports on other coronaviruses indicate that the threat of virus transmission from the aquatic environment may be currently non-existent. However, the presence of viral RNA in wastewater provides an early warning that highlights the need for effective sewage treatment to prevent a future outbreak of SARS-CoV-2.

Potential of coagulation to remove particle-associated and free-living antibiotic resistome from wastewater

Coagulation has been accepted as a cost-effective and environmental-friendly method to remove pollutants. In our recent work, two coagulants of polyaluminum chloride (PAC) and polyaluminum ferric chloride (PAFC) with dosage gradients, and one coagulant aid of anionic polyacrylamide (PAM) were used to investigate their potential to remove particle-associated (PA) and free-living (FL) ARGs and MGEs detected by high throughput qPCR (HT-qPCR) method. The results indicated that the maximum removal efficiencies of PA- and FL-ARGs (4.67- and 3.18-logs) were obtained at the PAFC dosage of 50.0 mg/L. Excessive PAFC dosage can hamper the removal of size-fractionated ARGs. As PAC aid, anionic PAM (1.0 mg/L) had limited effects to promote the removal of PA-ARG, while FL-ARG removal was enhanced by 0.34 log at the PAC dosage of 50.0 mg/L. The fitted curves suggested that the optimal chemical dosages of PAC, PAFC and PAC coupled with PAM in the removal of total ARGs and MGEs were 40.5, 64.7 and 50.0 mg/L, respectively. In addition, we found that much more coagulants were needed to remove FL-ARGs compared to that of PA-ARGs. The removal efficiencies of size-fractionated ARGs by flocculation can be affected by coagulant type, dosage, coagulant aid, Zeta potential and microorganism lifestyle (PA or FL).

Direct Purification of Digestate Using Ultrafiltration Membranes: Influence of Pore Size on Filtration Behavior and Fouling Characteristics

Ultrafiltration (UF) can effectively remove large particles, suspended solids, and colloidal substances from anaerobic digestate. However, membrane fouling is a technical challenge in the purification of the digestate by UF. In this study, polyethersulfone (PES) membranes with four pore sizes (50.0, 20.0, 10.0 and 5.0 kDa) were employed to filter anaerobic digestate from swine manure. The effects of temperature, transmembrane pressure (TMP), and cross-flow velocity (CFV) on flux were investigated. The purification effects and fouling characteristics of the four membranes were analyzed. The results revealed that the increase of temperature and CFV can effectively promote UF separation efficiency, but as the TMP exceeded 3.0 bar, the flux increase rates of the four membranes were almost zero. The larger membrane pore size caused the faster flux increase with the increase in pressure. During the batch experiment, the 20.0 kDa membrane showed the lowest flux maintenance ability, while the 5.0 kDa showed the highest ability due to the smaller pore size. All four membranes can effectively remove tetracyclines residues. Elements C, O, and S were the major membrane foulant elements. The dominant bacteria orders of membrane fouling were Pseudomonadales, Xanthomonadales and Burkholderiales. Compared with tap water and citric acid, the membrane cleaning by NaOH and NaClO showed higher flux recovery rates. The 50.0 kDa membrane achieved the best cleaning effects under all cleaning methods.

The inactivation of bacteriophage MS2 by sodium hypochlorite in the presence of particles

The inactivation of bacteriophage MS2 by sodium hypochlorite was investigated to understand the effect of solution chemistry on the disinfection efficacy in the presence of particles. Kaolinite and Microcystis aeruginosa (M. aeruginosa) were used as the models of inorganic and organic particles to simulate high turbidity and algal cells, respectively, in drinking water sources. In both particle-containing solutions, lower pH, the presence of cations (di-valent Ca²⁺) and natural organic matters (NOM) were regarded as the main factors to influence the aggregation and inactivation of MS2. The results showed that MS2 aggregated in all solutions at pH 3.0, protecting the inner viruses. At pH 7.0, the presence of Na⁺ cations (0-200 mmol/L) did not affect the inactivation efficacy of MS2, which always followed the order of particles-free ≈ kaolinite > M. aeruginosa. The inactivation efficacy of MS2 in the presence of Ca²⁺ cations followed the order of kaolinite > particles-free > M. aeruginosa at 0-50 mmol/L Ca²⁺ cations, while the inactivation efficacy remained almost constant in the range of 100-200 mmol/L Ca²⁺ cations. By contrast, kaolinite offered not enough protection to adsorbed MS2, but MS2 aggregation decreased disinfection efficacy at a high concentration of Ca²⁺ cations. Moreover, the presence of humic acid as NOM decreased the inactivation of MS2 more significantly than M. aeruginosa due to the more consumption of free chlorine from humic acids. Therefore, the co-existence of NOM and di-valent Ca²⁺ cations are potential challenges for the inactivation of viruses by sodium hypochlorite in safe drinking water.

SARS-CoV-2 in environmental perspective: Occurrence, persistence, surveillance, inactivation and challenges

The unprecedented global spread of the severe acute respiratory syndrome (SARS) caused by SARS-CoV-2 is depicting the distressing pandemic consequence on human health, economy as well as ecosystem services. So far novel coronavirus (CoV) outbreaks were associated with SARS-CoV-2 (2019), middle east respiratory syndrome coronavirus (MERS-CoV, 2012), and SARS-CoV-1 (2003) events. CoV relates to the enveloped family of Betacoronavirus (βCoV) with positive-sense single-stranded RNA (+ssRNA). Knowing well the persistence, transmission, and spread of SARS-CoV-2 through proximity, the faecal-oral route is now emerging as a major environmental concern to community transmission. The replication and persistence of CoV in the gastrointestinal (GI) tract and shedding through stools is indicating a potential transmission route to the environment settings. Despite of the evidence, based on fewer reports on SARS-CoV-2 occurrence and persistence in wastewater/sewage/water, the transmission of the infective virus to the community is yet to be established. In this realm, this communication attempted to review the possible influx route of the enteric enveloped viral transmission in the environmental settings with reference to its occurrence, persistence, detection, and inactivation based on the published literature so far. The possibilities of airborne transmission through enteric virus-laden aerosols, environmental factors that may influence the viral transmission, and disinfection methods (conventional and emerging) as well as the inactivation mechanism with reference to the enveloped virus were reviewed. The need for wastewater epidemiology (WBE) studies for surveillance as well as for early warning signal was elaborated. This communication will provide a basis to understand the SARS-CoV-2 as well as other viruses in the context of the environmental engineering perspective to design effective strategies to counter the enteric virus transmission and also serves as a working paper for researchers, policy makers and regulators.

The role of wastewater treatment plants as tools for SARS-CoV-2 early detection and removal

The world is facing the third coronavirus caused pandemic in less than twenty years. The SARS-CoV-2 virus not only affects the human respiratory system, but also the gastrointestinal tract. The virus has been found in human feces, in sewage and in wastewater treatment plants. It has the potential to become a panzootic disease, as it is now proven that several mammalian species become infected. Since it has been shown that the virus can be detected in sewage even before the onset of symptoms in the local population, Wastewater Based Epidemiology should be developed not only to localize infection clusters of the primary wave but also to detect a potential second, or subsequent, wave. To prevent a panzootic, virus removal techniques from wastewater need to be implemented to prevent the virus dissemination into the environment. In that context, this review presents recent improvements in all the fields of wastewater treatment from treatment ponds to the use of algae or nanomaterials with a particular emphasis on membrane-based techniques.

Hybrid UF/NF process treating secondary effluent of wastewater treatment plants for potable water reuse: Adsorption vs. coagulation for removal improvements and membrane fouling alleviation

Coagulation and adsorption are gradually adopted as pre-treatments to produce reclaimed potable water. However, previous researches on membrane fouling mechanisms were currently insufficient to minimize dual membrane fouling. This study aimed at investigating the effects of pre-coagulation and pre-adsorption on the removal performance and membrane fouling alleviation of dual membrane UF/NF process in treating secondary effluent from a wastewater treatment plant. The results indicated that both types of pretreatments conferred positive effects on organic membrane fouling removal of the UF process whereas diverse effects on NF process. Pre-coagulation could enhance the removal of nitrogen and phosphorus to contribute towards producing microbiologically-stable water. On the other hand, introduction of Al³⁺ reduced the removal efficiency of UF/NF systems on heavy metals. From the perspective of UF membrane fouling, two pretreatments employed could increase the flux of UF, but simultaneously aggravating irreversible membrane fouling. Hermia and Tansel models revealed an unstable cake filtration was caused by pre-coagulation and pre-adsorption. Both the models consistently demonstrated the rapid formation of cake filtration onto UF membrane surface. Interestingly, the powdered activated carbon (PAC) adsorption could significantly reduce cake layer fouling onto the surface of NF membrane, while pre-coagulation aggravated the NF fouling. These results are essential to developing robust, cost-effective and energy-efficient strategies based on membranes to produce reclaimed potable water.

Comparison of coagulative colloidal microbubbles with monomeric and polymeric inorganic coagulants for tertiary treatment of distillery wastewater

The flotation using coagulative colloidal gas aphrons (CCGAs) is of great potential in effectively removing the recalcitrant dissolved organic matter (DOM) and colorants from the bio-chemically treated cassava distillery wastewater. As bubble modifier, the monomeric and polymeric inorganic coagulants need to be studied considering their distinct influence on the surfactant/coagulant complex, the properties of colloidal aphrons as well as the process performance and mechanisms. Such studies help to create robust CCGAs with high flotation potential. In this work, the commonly-used monomeric and polymeric Al(III)- and Fe(III)-coagulants were combined with the cationic surfactant - cetyl trimethylammonium bromide (CTAB) to generate CCGAs. The CCGAs functionalized with Al(III)-coagulants (both monomeric and polymeric ones) were featured as small bubble size, strong stability and high air content. Particularly, the monomeric Al(III)-coagulant (AlCl₃ in this work) resulted in low surface tension and high foamability when being mixed with CTAB in the bubble generation solution. Those CCGAs achieved high removal efficiencies of DOM and colorants at low coagulant concentrations. The molecular weight of DOM in effluent was well controlled below 1 kDa by CCGAs. For the flocs obtained from CCGA-flotation, the characteristic Raman band of DOM and colorants showed the layer-by-layer variation of Raman intensity which decreased from the outer layer to the center. In contrast with the conventional coagulation-flotation, the reduction of coagulant dosage by CCGAs was 67% (AlCl₃), 25% (polyaluminum chloride), 60% (Fe₂(SO₄)₃) and 40% (polyferric sulfate). The sludge production could then be largely reduced, and meanwhile, the retention time was shortened by 9.5 min.

Pretreatment of ceramic membrane microfiltration in wastewater reuse: A comparison between ozonation and coagulation

To determine the most efficient pretreatment for ceramic membrane filtration (CMF) of primary clarifier effluent (PE), the effectiveness of ozonation and coagulation was investigated from the viewpoint of both virus removal and mitigation of membrane fouling. Our results showed virus removal by coagulation to be more efficient as a CMF pretreatment, whereas ozonation showed better efficiency when used as a CMF posttreatment. The effect of ozonation and coagulation on ceramic membrane fouling was investigated during short-term operation. With the use of coagulation before CMF (PACl + CMF), irreversible fouling resistance was 0.5 × 10¹¹ m^-1 at a dosage of 150 mg/L of polyaluminum chloride (PACl), which was 10 times lower than when ozonation was used as a pretreatment to CMF (O₃+CMF) (0.7 × 10¹² m^-1 at 50 mg-O₃/L). This result indicates coagulation to be more efficient than ozonation for mitigating ceramic membrane fouling. Based on these results, the process sustainability of PACl + CMF was then investigated during longer-term operation. At a dosage of 150 mg/L of PACl, the PACl + CMF process could be sustainably operated for 120 h without any need for chemically enhanced backwashing, which was twice as long as for PACl dosages of 50 and 100 mg/L. Coagulation is thus a more efficient pretreatment for CMF of PE from the viewpoint of both virus removal and mitigation of ceramic membrane fouling. The hygienic safety of reclaimed water can be further improved if ozonation is used as a CMF posttreatment.

Evaluation of virus reduction at a large-scale wastewater reclamation plant by detection of indigenous F-specific RNA bacteriophage genotypes

Evaluating the reduction of virus load in water reclamation plants is important to ensuring the hygienic safety of the reclaimed water. A virus-spiking test is usually used to estimate virus reduction but is not practicable at large-scale plants. Thus, we evaluated virus reduction by ultrafiltration (UF) plus ultraviolet (UV) irradiation at a large-scale reclamation plant (1000 m³/d) by quantifying indigenous F-specific RNA bacteriophages (FRNAPHs). To detect the infectious FRNAPH, we used both plaque assay and integrated culture-reverse-transcription polymerase chain reaction combined with the most probable number assay, which can detect infectious FRNAPH genotypes. For comparison, we determined reductions of indigenous FRNAPHs and spiked MS2 at a small-scale pilot plant (10 m³/d) at the same time. Reductions by UF were not significantly different among the bacteriophages at pilot plants. This result suggests that indigenous bacteriophages could be used for evaluating virus reduction by UF at large-scale plants. Indigenous Genotype I (GI) FRNAPH showed the highest UV resistance, followed by GII, GIII, and GIV. The resistance of GI-FRNAPH was equivalent to that of spiked MS2. The reduction of the total infectious FRNAPHs determined by plaque assay was affected by the predominant FRNAPH genotype, presumably because of their different UV resistances. Our results reveal that indigenous GI-FRNAPH can be a good alternative indicator to spiked MS2 in view of virus reduction during water reclamation. The reclaimed water from our large-scale reclamation plant could be used for irrigation because the expected reduction (6.3 log₁₀) of indigenous GI-FRNAPH achieved the Title 22 (>5 log₁₀).

Mitigated membrane fouling and enhanced removal of extracellular antibiotic resistance genes from wastewater effluent via an integrated pre-coagulation and microfiltration process

Antibiotic resistance genes (ARGs) have been regarded as an emerging pollutant in municipal wastewater treatment plant (WWTP) effluents due to their potential risk to human health and ecological safety when reused for landscape and irrigation. Conventional wastewater treatment processes generally fail to effectively reduce ARGs, especially extracellular ARGs (eARGs), which are persistent in the environment and play an important role in horizontal gene transfer via transformation. Herein, an integrated process of pre-coagulation and microfiltration was developed for removal of ARGs, especially eARGs, from wastewater effluent. Results show that the integrated process could effectively reduce the absolute abundances of total ARGs (tARGs) (>2.9 logs) and eARGs (>5.2 logs) from the effluent. The excellent performance could be mainly attributed to the capture of antibiotic resistant bacteria (ARB) and eARGs by pre-coagulation and co-rejection during subsequent microfiltration. Moreover, the integrated process exhibited a good performance on removing common pollutants (e.g., dissolved organic carbon and phosphate) from the effluent to improve water quality. Besides, the integrated process also greatly reduced membrane fouling compared with microfiltration. These findings suggest that the integrated process of pre-coagulation and microfiltration is a promising advanced wastewater treatment technology for ARGs (especially eARGs) removal from WWTP effluents to ensure water reuse security.

How Fiber Breakage Reduces Microorganism Removal in Ultrafiltration for Wastewater Reclamation

Ultrafiltration (UF) membranes are increasingly being used for wastewater reclamation treatment for their high removal of pathogens and suspended solids. However, breakage of UF membrane fibers could allow leakage of pathogens into the permeate and create health risks in the use of reclaimed water. Here, we assessed the log₁₀ reduction value (LRV) of human enteric viruses and microbial indicators of new and aged UF modules in a pilot-scale UF process to evaluate the influence of fiber breakage. Norovirus genotypes I and II, Aichi virus, and Escherichia coli were not detected in any permeate samples of intact UF modules, but were detected in samples of damaged UF modules. LRVs of all microorganisms assayed decreased as fiber breakage of new UF modules increased, with maximum decreases of > 3.3 log₁₀. Fiber breakage in the aged UF modules did not decrease LRVs of somatic coliphages and MS2, but breakage in the new UF modules did decrease them. Intact new UF modules gave higher LRVs than intact aged UF modules. When the LRV of intact UF module was assumed to be 1 or 2 log₁₀, increasing fiber breakage did not significantly decrease the predicted LRV, but when it was ≥ 3 log₁₀, it did decrease LRV, in good agreement with measured LRVs in the degraded UF modules. These results suggest that the LRV of intact UF modules affects the decrease in LRV and confirm the leakage of human enteric viruses following fiber breakage in UF modules of different ages in the UF process of wastewater reclamation.