1
|
Hou B, Yang X, Wang L, Shi T, Akram M, Wang L, Wan J, Gao B, Pan J. Fe doping enhanced Cr(VI) adsorption efficiency of cerium-based adsorbents: Adsorption behaviors and inner removal mechanisms. J Colloid Interface Sci 2024; 673:216-227. [PMID: 38875788 DOI: 10.1016/j.jcis.2024.06.036] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/25/2024] [Revised: 06/01/2024] [Accepted: 06/05/2024] [Indexed: 06/16/2024]
Abstract
Cerium-based adsorbents possessed unique advantages of valence variability and abundant oxygen vacancies in hexavalent chromium (Cr(VI)) adsorption, but high cost and unstable properties restricted their application in Cr(VI) contained wastewater treatment. Herein, a series of bimetallic adsorbents with different cerium/iron ratios (CeFe@C) were prepared by adding inexpensive Fe into Ce-based adsorbents (Ce@C), and the effect of Fe doping on adsorption properties of Ce@C for Cr(VI) was investigated thoroughly. Compared with pristine Ce@C, CeFe@C exhibited excellent removal performance for Cr(VI), and the improved maximum adsorption capacity reached 75.11 mg/g at 25℃. Benefiting from Fe doping, CeFe@C had good regeneration property, with only 25 % decrease after five adsorption-desorption cycles. Contents of trivalent cerium (Ce(III)) and oxygen vacancies (Ov) in bimetallic adsorbents were positively correlated with divalent iron (Fe(II)) doping, indicating that the formation of Ce(III) and surface defects on Ce@C could be effectively regulated by Fe doping. Density functional theory (DFT) calculation results further proved that the doped Fe enhanced the electron transfer effectively and lowered the energy barriers of Cr(VI) adsorption onto Ce@C surface, strengthening the reduction and complexation to Cr(VI). This study provides new insights for improving the Cr(VI) removal performance by modified Ce-based adsorbents, and further promotes the utilization potentiality of low-cost and low-toxicity Ce-based adsorbents in Cr(VI)-containing wastewater treatment.
Collapse
Affiliation(s)
- Bing Hou
- Key Laboratory of Eco-chemical Engineering, International Science and Technology Cooperation Base of Eco-chemical Engineering and Green Manufacturing, Qingdao University of Science and Technology, College of Environment and Safety Engineering, Qingdao 266042, PR China
| | - Xinyu Yang
- Key Laboratory of Eco-chemical Engineering, International Science and Technology Cooperation Base of Eco-chemical Engineering and Green Manufacturing, Qingdao University of Science and Technology, College of Environment and Safety Engineering, Qingdao 266042, PR China
| | - Ling Wang
- Key Laboratory of Eco-chemical Engineering, International Science and Technology Cooperation Base of Eco-chemical Engineering and Green Manufacturing, Qingdao University of Science and Technology, College of Environment and Safety Engineering, Qingdao 266042, PR China
| | - Tao Shi
- Shandong Luqiao Group Co. Ltd., Jinan 250021, PR China
| | - Muhammad Akram
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing 2010094, PR China
| | - Lei Wang
- Key Laboratory of Eco-chemical Engineering, International Science and Technology Cooperation Base of Eco-chemical Engineering and Green Manufacturing, Qingdao University of Science and Technology, College of Environment and Safety Engineering, Qingdao 266042, PR China
| | - Jun Wan
- Key Laboratory of Eco-chemical Engineering, International Science and Technology Cooperation Base of Eco-chemical Engineering and Green Manufacturing, Qingdao University of Science and Technology, College of Environment and Safety Engineering, Qingdao 266042, PR China.
| | - Baoyu Gao
- Shandong Key Laboratory of Water Pollution Control and Resource Reuse, School of Environmental Science and Engineering, Shandong University, Qingdao 266237, PR China
| | - Jingwen Pan
- Key Laboratory of Eco-chemical Engineering, International Science and Technology Cooperation Base of Eco-chemical Engineering and Green Manufacturing, Qingdao University of Science and Technology, College of Environment and Safety Engineering, Qingdao 266042, PR China.
| |
Collapse
|
2
|
Zhang X, Qi X, Ouyang J, Zuo Y, Ma Q, Tan H, Guo X, Wu Y. Fluorescent cellulose nanofibrils-based hydrogel incorporating MIL-125-NH 2 for effective adsorption and detection of iodide ion. JOURNAL OF HAZARDOUS MATERIALS 2024; 474:134758. [PMID: 38820756 DOI: 10.1016/j.jhazmat.2024.134758] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/03/2024] [Revised: 05/19/2024] [Accepted: 05/28/2024] [Indexed: 06/02/2024]
Abstract
To remove iodine ion (I-) from wastewater, a novel hydrogel, the fluorescent cellulose nanofibrils-based hydrogel (FCNH), was synthesized to enable both detection and adsorption of I-. The FCNH comprised cellulose nanofibrils (CNs), silver nanoclusters (AgNCs), and MIL-125-NH2. It exhibited an excellent adsorption capacity for I-, with a maximum adsorption capacity of 373.7 mg/g, fitting both the Langmuir and pseudo-second-order models. Additionally, FCNH displayed excellent regeneration properties, retaining 88.0 % of its initial adsorption capacity after six adsorption-desorption cycles. Functioning as a fluorescent sensor, the synthesized FCNH enabled the detection of I- through dynamic quenching, with linear ranges of 5 to 200 mg/L and 0.2 to 1.0 μg/L, and a determination limit of 0.11 μg/L. Analysis of the adsorption and detection mechanisms revealed that FCNH's outstanding performance arose from its 3D porous structure comprising CNs, AgNCs, and MIL-125-NH2. Economic analysis indicated that FCNH was inexpensive compared to commercially available activated carbon. Thus, FCNH demonstrated significant potential as an economical and reusable adsorbent for iodine ion removal.
Collapse
Affiliation(s)
- Xuefeng Zhang
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China
| | - Xinmiao Qi
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China
| | - Jiayu Ouyang
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China
| | - Yingfeng Zuo
- College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004, China
| | - Qiang Ma
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China
| | - Haining Tan
- National Glycoengineering Research Center, Shandong University, Qingdao 266237, China
| | - Xin Guo
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China.
| | - Yiqiang Wu
- College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004, China
| |
Collapse
|
3
|
Fu M, Tuo X, Yan X, Li D, Zhu H, Gao S, Han X, Zhou J, Mou D, Xiu J. Adsorption performance and mechanism of pectin modified with β-cyclodextrin for Zn 2+ and Cu 2. Int J Biol Macromol 2024; 274:133563. [PMID: 38950803 DOI: 10.1016/j.ijbiomac.2024.133563] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/02/2024] [Revised: 06/24/2024] [Accepted: 06/28/2024] [Indexed: 07/03/2024]
Abstract
Removing heavy metals from aqueous solutions has drawn more and more attentions these years because of their serious global health challenge to human society. To develop an adsorbent with green, stable and high-efficiency for adsorption of heavy metals, pectin β-cyclodextrin composite was successfully prepared and used for Zn2+ and Cu2+ adsorption for the first time. Various variables that influence the adsorption performance were explored, and the optimal adsorption conditions were determined. According to the pseudo-second-order kinetic model, the adsorption process of Zn2+ and Cu2+ by the adsorbent was mainly chemical adsorption. The adsorbent adsorption process was an exothermic and non-spontaneous process. According to the Langmuir isotherm model, the maximum adsorption capacity was 12.51 ± 0.33 and 24.98 ± 0.23 mg/g for Zn2+ and Cu2+, respectively. The FTIR, EDX and XPS results revealed that the main mechanisms of removing pollutants by adsorbent were ion exchange and coordination. In addition, electrostatic attraction and chelation were present in the adsorption process. After five adsorption desorption cycles, the pectin β-cyclodextrin composite adsorbent still exhibited adsorption and regeneration capabilities. This study provides a low-cost, effective and simple method for preparation of modified pectin, which has excellent application potential in the removal of heavy metal ions from wastewater.
Collapse
Affiliation(s)
- Meiling Fu
- Agricultural Product Storage and Processing Laboratory, College of Food and Biology, Hebei University of Science and Technology, Shijiazhuang, Hebei 050000, China
| | - Xiaoqi Tuo
- Agricultural Product Storage and Processing Laboratory, College of Food and Biology, Hebei University of Science and Technology, Shijiazhuang, Hebei 050000, China
| | - Xueqian Yan
- Agricultural Product Storage and Processing Laboratory, College of Food and Biology, Hebei University of Science and Technology, Shijiazhuang, Hebei 050000, China
| | - Dandan Li
- Agricultural Product Storage and Processing Laboratory, College of Food and Biology, Hebei University of Science and Technology, Shijiazhuang, Hebei 050000, China; Fermentation Technology Innovation Center, Hebei University of Science and Technology, Shijiazhuang, Hebei 050000, China.
| | - Hong Zhu
- Agricultural Product Storage and Processing Laboratory, College of Food and Biology, Hebei University of Science and Technology, Shijiazhuang, Hebei 050000, China
| | - Shan Gao
- Agricultural Product Storage and Processing Laboratory, College of Food and Biology, Hebei University of Science and Technology, Shijiazhuang, Hebei 050000, China
| | - Xue Han
- Agricultural Product Storage and Processing Laboratory, College of Food and Biology, Hebei University of Science and Technology, Shijiazhuang, Hebei 050000, China
| | - Jie Zhou
- Hebei Hawthorn Processing Technology Innovation Center, Chengde, Hebei 067300, China
| | - Dehua Mou
- Agricultural Product Storage and Processing Laboratory, College of Food and Biology, Hebei University of Science and Technology, Shijiazhuang, Hebei 050000, China
| | - Jianhua Xiu
- Hebei Hawthorn Processing Technology Innovation Center, Chengde, Hebei 067300, China
| |
Collapse
|
4
|
Li M, Zhang P, Mao J, Li J, Zhang Y, Xu B, Zhou J, Cao Q, Xiao H. Construction of cellulose-based hybrid hydrogel beads containing carbon dots and their high performance in the adsorption and detection of mercury ions in water. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 359:121076. [PMID: 38710148 DOI: 10.1016/j.jenvman.2024.121076] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/06/2024] [Revised: 04/17/2024] [Accepted: 04/30/2024] [Indexed: 05/08/2024]
Abstract
Cellulose-based adsorbents have been extensively developed in heavy metal capture and wastewater treatment. However, most of the reported powder adsorbents suffer from the difficulties in recycling due to their small sizes and limitations in detecting the targets for the lack of sensitive sensor moieties in the structure. Accordingly, carbon dots (CDs) were proposed to be encapsulated in cellulosic hydrogel beads to realize the simultaneous detection and adsorption of Hg (II) in water due to their excellent fluorescence sensing performance. Besides, the molding of cellulose was beneficial to its recycling and further reduced the potential environmental risk generated by secondary pollution caused by adsorbent decomposition. In addition, the detection limit of the hydrogel beads towards Hg (II) reached as low as 8.8 × 10-8 M, which was below the mercury effluent standard declared by WHO, exhibiting excellent practicability in Hg (II) detection and water treatment. The maximum adsorption capacity of CB-50 % for Hg (II) was 290.70 mg/g. Moreover, the adsorbent materials also had preeminent stability that the hydrogel beads could maintain sensitive and selective sensing performance towards Hg (II) after 2 months of storage. Additionally, only 3.3% of the CDs leaked out after 2 weeks of immersion in water, ensuring the accuracy of Hg (II) evaluation. Notably, the adsorbent retained over 80% of its original adsorption capacity after five consecutive regeneration cycles, underscoring its robustness and potential for sustainable environmental applications.
Collapse
Affiliation(s)
- Ming Li
- Hebei Key Lab of Power Plant Flue Gas Multi-Pollutants Control, Department of Environmental Science and Engineering, North China Electric Power University, Baoding, 071003, PR China; MOE Key Laboratory of Resources and Environmental Systems Optimization, College of Environmental Science and Engineering, North China Electric Power University, Beijing, 102206, PR China.
| | - Panpan Zhang
- Hebei Key Lab of Power Plant Flue Gas Multi-Pollutants Control, Department of Environmental Science and Engineering, North China Electric Power University, Baoding, 071003, PR China; MOE Key Laboratory of Resources and Environmental Systems Optimization, College of Environmental Science and Engineering, North China Electric Power University, Beijing, 102206, PR China.
| | - Jianwei Mao
- Hebei Key Lab of Power Plant Flue Gas Multi-Pollutants Control, Department of Environmental Science and Engineering, North China Electric Power University, Baoding, 071003, PR China; MOE Key Laboratory of Resources and Environmental Systems Optimization, College of Environmental Science and Engineering, North China Electric Power University, Beijing, 102206, PR China.
| | - Jianfeng Li
- Hebei Key Lab of Power Plant Flue Gas Multi-Pollutants Control, Department of Environmental Science and Engineering, North China Electric Power University, Baoding, 071003, PR China; MOE Key Laboratory of Resources and Environmental Systems Optimization, College of Environmental Science and Engineering, North China Electric Power University, Beijing, 102206, PR China.
| | - Yuling Zhang
- Hebei Key Lab of Power Plant Flue Gas Multi-Pollutants Control, Department of Environmental Science and Engineering, North China Electric Power University, Baoding, 071003, PR China; MOE Key Laboratory of Resources and Environmental Systems Optimization, College of Environmental Science and Engineering, North China Electric Power University, Beijing, 102206, PR China.
| | - Bo Xu
- CAS Key Laboratory of Standardization and Measurement for Nanotechnology, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing, 100190, PR China.
| | - Jin Zhou
- CAS Key Laboratory of Standardization and Measurement for Nanotechnology, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing, 100190, PR China.
| | - Qianyong Cao
- Department of Chemistry, Nanchang University, 999 Xuefu Avenue, Nanchang, 330031, PR China.
| | - Huining Xiao
- Department of Chemical Engineering, University of New Brunswick, Fredericton, E3B 5A3, Canada.
| |
Collapse
|
5
|
Ibrahim BM, Fakhre NA, Jalhoom MG, Qader IN, Shareef HY, Jalal AF. Removal of lead ions from aqueous solutions by modified cellulose. ENVIRONMENTAL TECHNOLOGY 2024; 45:2335-2347. [PMID: 35306975 DOI: 10.1080/09593330.2022.2056086] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/12/2021] [Accepted: 03/09/2022] [Indexed: 06/14/2023]
Abstract
The new adsorbent was prepared by mixing cellulose with dicyclohexyl-18- crown-6 via microwave irradiation method and it was used to remove lead ions from aqueous solution. In contrast to the traditional way (in which grafted polymers are produced by using chemical-free radical producers), this method is rapid, reproducible, and gives a high-quality product. Different physicochemical techniques such as FTIR, SEM, and XRD and TGA were used for the characterization of the produced adsorbent. Based on the ANOVA statistical value, the adsorption of Pb2+ ion onto grafted cellulose has been found to be significant, with very low probability (p) values (<0.001). The pH and initial concentration were observed to be the most significant factors that affected the Pb2+ ion removal from the analysis of variance. Pseudo-second-order and Langmuir equations were applied to the adsorption of Pb2+ ion and under the optimized conditions, the maximum absorption capacity in modified cellulose of Pb2+ was 58.3 mg/g. Various factors which affect metal ion adsorption, including temperature, power of hydrogen, shaking time, adsorbent quantity, and metal ions concentration were studied. More importantly, the adsorbent could be reused by using 0.1 M nitric acid.
Collapse
Affiliation(s)
- Bnar M Ibrahim
- Department of Chemistry, College of Science, University of Raparin, Sulaymaneyah, Iraq
| | - Nabil A Fakhre
- Department of Chemistry, College of Education, Salahaddin University, Erbil, Iraq
| | - Moayyed G Jalhoom
- Department of Production Engineering and Minerals, University of Technology, Baghdad, Iraq
| | - Ibrahim Nazem Qader
- Department of Physics, College of Science, University of Raparin, Sulaymaneyah, Iraq
| | - Huda Y Shareef
- Department of Chemistry, College of Education, Salahaddin University, Erbil, Iraq
| | - Aveen F Jalal
- Department of Chemistry, College of Education, Salahaddin University, Erbil, Iraq
| |
Collapse
|
6
|
Hou B, Pan J, Shi T, Dang Z, Yang S, Wang L, Gao B. Efficient removal of hexavalent chromium by nano-cerium-based adsorbent: The critical role of valence state and oxygen vacancy. JOURNAL OF HAZARDOUS MATERIALS 2024; 464:133020. [PMID: 37984134 DOI: 10.1016/j.jhazmat.2023.133020] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/23/2023] [Revised: 10/31/2023] [Accepted: 11/13/2023] [Indexed: 11/22/2023]
Abstract
Cerium-based adsorbents have been gradually used for the adsorption removal of highly toxic Cr(VI) from wastewater due to their low toxicity and wide working pH. However, the intrinsic properties of adsorbents contribute significantly to their adsorption performance, and the relationship between them needs to be clarified. Herein, series of nano-cerium based adsorbents (Ce@Cs) with different surface defects and Ce(III) content were prepared to explore their effects on the Cr(VI) adsorption capacity. Results showed that the optimal Ce@C performed well over a wide pH range of 2.0-12.0, and the calculated Cr(VI) adsorption capacity reached 302.43 mg/g at 45 ℃. Ce(III) and surface defects in cerium-based adsorbents exhibited an important influence on the Cr(VI) adsorption performance of Ce@Cs, and their contents showed a good positive correlation with the Cr adsorption capacity (R2 =0.988 and 0.827). A series of evidences confirmed that the generated Ce(III) and oxygen vacancies could provide more sufficient coordination number to promote Cr(VI) complexation with Ce@Cs and lower the impedance of Ce@Cs to improve the reduction of Cr(VI) to low-toxic Cr(III). This work provides new insights into the Cr(VI) adsorption using cerium-based adsorbents, which helps to improve their potential in the purification of Cr(VI)-containing wastewater.
Collapse
Affiliation(s)
- Bing Hou
- Key Laboratory of Eco-chemical Engineering, International Science and Technology Cooperation Base of Eco-chemical Engineering and Green Manufacturing, College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao 266042, PR China
| | - Jingwen Pan
- Key Laboratory of Eco-chemical Engineering, International Science and Technology Cooperation Base of Eco-chemical Engineering and Green Manufacturing, College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao 266042, PR China.
| | - Tao Shi
- Shandong Luqiao Group Co. Ltd., Jinan 250021, China
| | - Zhenhua Dang
- Key Laboratory of Eco-chemical Engineering, International Science and Technology Cooperation Base of Eco-chemical Engineering and Green Manufacturing, College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao 266042, PR China
| | - Shu Yang
- Key Laboratory of Eco-chemical Engineering, International Science and Technology Cooperation Base of Eco-chemical Engineering and Green Manufacturing, College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao 266042, PR China
| | - Lei Wang
- Key Laboratory of Eco-chemical Engineering, International Science and Technology Cooperation Base of Eco-chemical Engineering and Green Manufacturing, College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao 266042, PR China.
| | - Baoyu Gao
- Shandong Key Laboratory of Water Pollution Control and Resource Reuse, School of Environmental Science and Engineering, Shandong University, Qingdao 266237, PR China
| |
Collapse
|
7
|
Ma M, Ke X, Wang T, Li J, Ye H. A novel double-network hydrogel made from electrolytic manganese slag and polyacrylic acid-polyacrylamide for removal of heavy metals in wastewater. JOURNAL OF HAZARDOUS MATERIALS 2024; 462:132722. [PMID: 37865073 DOI: 10.1016/j.jhazmat.2023.132722] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/11/2023] [Revised: 09/28/2023] [Accepted: 10/03/2023] [Indexed: 10/23/2023]
Abstract
Electrolytic manganese slag (EMS), a bulk waste generated in industrial electrolytic manganese production, can be a cost-effective adsorbent for heavy metals removal after appropriate modification. In this study, EMS was activated by NaOH and then used to make the EMS-based double-network hydrogel (an EMS/PAA hydrogel) via a one-pot method. The results showed that the EMS/PAA hydrogel exhibits a high selective adsorption capacity of 153.85, 113.63 and 54.35 mg·g-1 for Pb (II), Cd (II) and Cu (II), respectively. In addition, Density Functional Theory (DFT) suggests that the adsorption energies (Ead) of Pb, Cd and Cu on SiO2/PAA of the EMS/PAA gels are - 4.15, - 1.96, and - 2.83 eV, respectively, and SiO2/PAA, with a strong affinity to Pb2+, is one of the reasons for the selective adsorption capacity of EMS/PAA gel for Pb2+. The removal efficiency of the EMS/PAA gel for Pb2+, Cd2+, Cu2+ decreased after four adsorption-desorption cycles by 20.00 %, 24.56 % and 46.56 %, respectively. Mechanism studies suggested that the elimination of the heavy metals by EMS/PAA gels mainly involves electrostatic attraction, inner-sphere complexation, and coordination interactions. The EMS/PAA hydrogels not only have high adsorption capacity, but are also easy to prepare and circulate, making them ideal for practical applications.
Collapse
Affiliation(s)
- Mengyu Ma
- Engineering Research Center for Heavy Metal Pollution Control of Hubei Province, College of Resources and Environmental Science, South-Central Minzu University, Wuhan 430074, PR China
| | - Xuan Ke
- Engineering Research Center for Heavy Metal Pollution Control of Hubei Province, College of Resources and Environmental Science, South-Central Minzu University, Wuhan 430074, PR China
| | - Ting Wang
- Engineering Research Center for Heavy Metal Pollution Control of Hubei Province, College of Resources and Environmental Science, South-Central Minzu University, Wuhan 430074, PR China
| | - Jia Li
- Engineering Research Center for Heavy Metal Pollution Control of Hubei Province, College of Resources and Environmental Science, South-Central Minzu University, Wuhan 430074, PR China.
| | - Hengpeng Ye
- Engineering Research Center for Heavy Metal Pollution Control of Hubei Province, College of Resources and Environmental Science, South-Central Minzu University, Wuhan 430074, PR China
| |
Collapse
|
8
|
Jia J, Wu D, Yu J, Gao T, Guo L, Li F. Upgraded β-cyclodextrin-based broad-spectrum adsorbents with enhanced antibacterial property for high-efficient dyeing wastewater remediation. JOURNAL OF HAZARDOUS MATERIALS 2024; 461:132610. [PMID: 37757550 DOI: 10.1016/j.jhazmat.2023.132610] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/24/2023] [Revised: 09/20/2023] [Accepted: 09/21/2023] [Indexed: 09/29/2023]
Abstract
The dyeing wastewater contains amounts of refractory organic compounds, and severely endangers the ecosystem and human health. To alleviate this problem, in this study, the low-cost broad-spectrum nano-adsorbent (denoted as CD/CA-g-CS) with strong antibacterial activity has been synthesized by chemical binding of β-cyclodextrin (β-CD) with chitosan (CS) and citric acid (CA) for high-efficient dyes scavenger. Taking advantage of the extraordinary water insolubility, porous nature and abundant surface groups, the synthesized CD/CA-g-CS outperforms the previously reported adsorbents in terms of adsorption performance. The CD/CA-g-CS exhibits ultrahigh adsorption capacities of 801.66, 770.50 and 946.66 mg/g, respectively mg/g for the cationic dyes of malachite green (MG), basic red (BR) and methylene blue (MB), respectively, while 389.64, 619.60 and 429.22 mg/g for the anionic dyes of acid blue (AB), acid red (AR) and acid yellow (AY), respectively. The chemical monolayer absorption is further demonstrated by the analysis based on the pseudo-second-order adsorption kinetics and Langmuir isotherm models. The regenerable CD/CA-g-CS not only performs well in one-step removal of the mixed dyes in the simulated sewage, but also exhibits superior performance in purifying real industrial wastewater. Moreover, CD/CA-g-CS endowed with antibacterial activity leads to an inhibition rate of over 99.99 % for E. coli. The newly developed CD/CA-g-CS adsorbents are highly promising for high-efficient dyeing wastewater remediation.
Collapse
Affiliation(s)
- Jie Jia
- Key Laboratory of Textile Science & Technology, Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, PR China
| | - Dequn Wu
- Key Laboratory of Textile Science & Technology, Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, PR China
| | - Jianyong Yu
- Innovation Center for Textile Science and Technology, Donghua University, Shanghai 201620, PR China
| | - Tingting Gao
- Key Laboratory of Textile Science & Technology, Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, PR China
| | - Leiming Guo
- Key Laboratory of Textile Science & Technology, Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, PR China.
| | - Faxue Li
- Key Laboratory of Textile Science & Technology, Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, PR China.
| |
Collapse
|
9
|
He C, Mou H, Hou W, Chen W, Ao T. Drought-resistant and water-retaining tobermorite/starch composite hydrogel for the remediation of cadmium-contaminated soil. Int J Biol Macromol 2024; 255:127534. [PMID: 37866565 DOI: 10.1016/j.ijbiomac.2023.127534] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2023] [Revised: 10/13/2023] [Accepted: 10/16/2023] [Indexed: 10/24/2023]
Abstract
The objective of this work is utilizing fly ash to synthesize tobermorite (TOB) with a higher specific surface area and layered structure, and incorporating it into the starch/acrylic acid network to boost the drought resistance, water retention and heavy metal adsorption properties. The water absorption and water retention performance and cadmium adsorption characteristics of tobermorite/leftover rice-based composite hydrogel (TOB@LR-CH) were evaluated by water absorption swelling test, soil evaporation test and batch adsorption experiment. By adjusting the addition of TOB and other synthesized conditions, the swelling property (from 114.80 g/g to 322.64 g/g), water retention (71.80 %, 144 h) and Cd2+ adsorption characteristics (up to 591.36 mg/g) were significantly enhanced. Adding a moderate amount of TOB (2 wt%) provided the most uniform tobermorite dispersion during synthesis, and TOB2@LR-CH exhibited the most stable three-dimensional network and highest proportion of effective TOB. The adsorption behavior of cadmium on TOB2@LR-CH was more consistent with the pseudo-second-order kinetics and Langmuir isotherm models. Additionally, the regeneration test results displayed that the adsorption removal rate of cadmium by TOB2@LR-CH adsorbent remained stable after 5 cycles. This study demonstrates that TOB@LR-CH has good water absorption and water retention potential in arid and semi-arid soils, and also has potential application prospects in remediating Cd(II)-contaminated soil.
Collapse
Affiliation(s)
- Caiqing He
- College of Architecture and Environment, Sichuan University, Chengdu, 610065, China
| | - Haiyan Mou
- Institute for Disaster Management and Reconstruction, Sichuan University-The Hong Kong Polytechnic University, Chengdu 610065, China.
| | - Wenjing Hou
- College of Architecture and Environment, Sichuan University, Chengdu, 610065, China
| | - Wenqing Chen
- College of Architecture and Environment, Sichuan University, Chengdu, 610065, China
| | - Tianqi Ao
- State Key Laboratory of Hydraulics and Mountain River Engineering, College of Water Resource and Hydropower, Sichuan University, Chengdu 610065, China
| |
Collapse
|
10
|
Zhang Z, Huang Z, Qin D, Liu D, Guo X, Lin H. Fluorescent starch-based hydrogel with cellulose nanofibrils and carbon dots for simultaneous adsorption and detection of Pb(II). Carbohydr Polym 2024; 323:121427. [PMID: 37940256 DOI: 10.1016/j.carbpol.2023.121427] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/18/2023] [Revised: 09/20/2023] [Accepted: 09/21/2023] [Indexed: 11/10/2023]
Abstract
The adsorption removal of lead (Pb) ions has become a crucial area of research due to the potential health hazards associated with Pb contamination. Developing cost-effective adsorbents for the removal of Pb(II) ions is significantly important. Hence, a novel fluorescent starch-based hydrogel (FSH) using starch (ST), cellulose nanofibrils (CN), and carbon dots (CD) was fabricated for simultaneous adsorption and detection of Pb(II). A comprehensive characterization of FSH, including its morphological features, chemical composition, and fluorescence characteristics, was conducted. Notably, FSH exhibited a maximum theoretical adsorption capacity of 265.9 mg/g, which was 13.0 times higher than that of pure ST. Moreover, FSH was employed as a fluorescent sensor for Pb(II) determination, achieving a limit of detection (LOD) of 0.06 μg/L. An analysis was further performed to investigate the adsorption and detection mechanisms of Pb(II) utilizing FSH. This study provides valuable insights into the production of a novel cost-effective ST-based adsorbent for the removal of Pb(II) ions.
Collapse
Affiliation(s)
- Zhixu Zhang
- State Key Laboratory of Subhealth Intervention Technology, 410128 Changsha, Hunan, China; College of Horticulture, Hunan Agricultural University, 410128 Changsha, Hunan, China
| | - Zhengwu Huang
- College of Food Science and Technology, Hunan Agricultural University, 410128 Changsha, Hunan, China
| | - Dan Qin
- College of Food Science and Technology, Hunan Agricultural University, 410128 Changsha, Hunan, China
| | - Dongbo Liu
- State Key Laboratory of Subhealth Intervention Technology, 410128 Changsha, Hunan, China; College of Horticulture, Hunan Agricultural University, 410128 Changsha, Hunan, China
| | - Xin Guo
- College of Science, Central South University of Forestry and Technology, 410004 Changsha, Hunan, China.
| | - Haiyan Lin
- National Research Center of Engineering Technology for Utilization Ingredients from Botanicals, 410128 Changsha, Hunan, China
| |
Collapse
|
11
|
Hu S, Tao C, Liao S, Guan Y, Yin X, Zhu C, Liang J, Guo Z. Oxidative Dissolution of Sulfide Minerals Tends to Accumulate More Dissolved Heavy Metals in Deep Seawater Environments than in Shallow Seawater Environments. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2023; 57:21438-21447. [PMID: 38051181 DOI: 10.1021/acs.est.3c07507] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/07/2023]
Abstract
Deep-sea mining magnifies the release of heavy metals into seawater through oxidative dissolution of seafloor massive sulfide (SMS). At present, there is little information about how the metals released into seawater might be affected by the mineral assemblages, seawater conditions, and solid percentages. Here, leaching experiments were carried out to examine the behavior of three sulfides from the Southwest Indian Ridge, under conditions that replicated deep and shallow seawater environments at three solid-liquid ratios. The results demonstrated that sphalerite dissolved rapidly, and the metals released in both experimental conditions were comparable, potentially reflecting galvanic interactions between the sulfide minerals. Large quantities of the released metals were removed from the solutions when hydrous ferric oxides formed, especially for shallow seawater conditions. A comparison of metal concentrations in the leachates with the baseline metal concentrations in natural seawater indicated that most of the released metals, when diluted with seawater, would not have widespread impacts on ecosystems. Based on the obtained unique oxidative dissolution properties of each SMS at variable solid-liquid ratios, targeted wastewater discharge treatments are proposed to minimize impacts from the dissolved metals. This study will support the development of robust guidelines for deep-sea mining activities.
Collapse
Affiliation(s)
- Siyi Hu
- Key Laboratory of Submarine Geosciences, Second Institute of Oceanography, Ministry of Natural Resources, Hangzhou 310012, China
- Guangxi Key Laboratory of Beibu Gulf Marine Resources, Environment and Sustainable Development, Fourth Institute of Oceanography, Ministry of Natural Resources, Beihai 536000, China
| | - Chunhui Tao
- Key Laboratory of Submarine Geosciences, Second Institute of Oceanography, Ministry of Natural Resources, Hangzhou 310012, China
- School of Oceanography, Shanghai Jiaotong University, Shanghai 200030, China
| | - Shili Liao
- Key Laboratory of Submarine Geosciences, Second Institute of Oceanography, Ministry of Natural Resources, Hangzhou 310012, China
| | - Yao Guan
- Guangxi Key Laboratory of Beibu Gulf Marine Resources, Environment and Sustainable Development, Fourth Institute of Oceanography, Ministry of Natural Resources, Beihai 536000, China
| | - Xuebo Yin
- Key Laboratory of Marine Geology and Environment, Institute of Oceanology, Chinese Academy of Sciences, Qingdao 266071, China
| | - Chuanwei Zhu
- State Key Laboratory of Ore Deposit Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang 550081, China
| | - Jin Liang
- Key Laboratory of Submarine Geosciences, Second Institute of Oceanography, Ministry of Natural Resources, Hangzhou 310012, China
| | - Zhikui Guo
- Key Laboratory of Submarine Geosciences, Second Institute of Oceanography, Ministry of Natural Resources, Hangzhou 310012, China
| |
Collapse
|
12
|
Wang L, Jiang Y, Lu L, Zhang W, Li T, Liu Z, Liu F, Li A. Enhanced synergistic removal of Cu(II) and Cr(VI) with multifunctional biomass hydrogel from strong-acid media. CHEMOSPHERE 2023; 345:140490. [PMID: 37879371 DOI: 10.1016/j.chemosphere.2023.140490] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/15/2023] [Revised: 09/11/2023] [Accepted: 10/17/2023] [Indexed: 10/27/2023]
Abstract
Simultaneous recovery of heavy metal ions (HMIs) such as Cu(II) and Cr(VI) from strong-acid media was a great challenge due to the inhibition of protons. Herein, a novel biomass hydrogel (CMC/PEI-PD) containing various groups (bis-picolylamine, amino, and hydroxyl groups) was newly prepared by a facile two-step process. The static experiments relating pH, kinetics and isothermal co-adsorption confirmed the synergistic effect towards Cu(II) and Cr(VI) consistently. Specifically, the adsorption capacities of Cu(II) and Cr(VI) at pH 2.0 increased by 23.73% and 40.18% in comparison with the single systems. Moreover, coexistence of inorganic anions and cations could further increase the adsorption of Cu(II) and Cr(VI) by 59.90% and 43.39%, respectively. At the same time, the adsorption and desorption ratios for both HMIs remained stable. The superior performance came from the two dominant mechanisms of co-removal. On the one hand, Cu(II) chelated by bis-picolylamine group attracted Cr(VI) in the form of cation bridge, thus promoting Cr(VI) adsorption. On the other hand, the protonated amine group attracted Cr(VI) by electrostatic interaction and weakened the inter-cationic repulsion by electrostatic shielding, thus promoting Cu(II) adsorption. In addition, the dynamic column experiment towards simulated acidic electroplating wastewater involving Cu(II)-Cr(VI)-Ni(II) certified the high efficiency and feasibility of the co-removal. Therefore, CMC/PEI-PD owned great potential in the separation of typical HMIs even directly from strong-acid media.
Collapse
Affiliation(s)
- Liting Wang
- State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, China
| | - Yanni Jiang
- State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, China
| | - Lingxiao Lu
- State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, China
| | - Weiguo Zhang
- State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, China
| | - Tanshang Li
- State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, China
| | - Zicheng Liu
- Nanjing University & Yancheng Academy of Environmental Protection Technology and Engineering, Yancheng 224000, China
| | - Fuqiang Liu
- State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, China; Nanjing University & Yancheng Academy of Environmental Protection Technology and Engineering, Yancheng 224000, China.
| | - Aimin Li
- State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, China; Nanjing University & Yancheng Academy of Environmental Protection Technology and Engineering, Yancheng 224000, China
| |
Collapse
|
13
|
Jagaba AH, Lawal IM, Ghfar AA, Usman AK, Yaro NSA, Noor A, Abioye KJ, Birniwa AH. Biochar-based geopolymer nanocomposite for COD and phenol removal from agro-industrial biorefinery wastewater: Kinetic modelling, microbial community, and optimization by response surface methodology. CHEMOSPHERE 2023; 339:139620. [PMID: 37524265 DOI: 10.1016/j.chemosphere.2023.139620] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/18/2023] [Revised: 06/27/2023] [Accepted: 07/21/2023] [Indexed: 08/02/2023]
Abstract
Agro-industrial biorefinery effluent (AIBW) is considered a highly polluting source responsible for environmental contamination. It contains high loads of chemical oxygen demand (COD), and phenol, with several other organic and inorganic constituents. Thus, an economic treatment approach is required for the sustainable discharge of the effluent. The long-term process performance, contaminant removal and microbial response of AIBW to rice straw-based biochar (RSB) and biochar-based geopolymer nanocomposite (BGC) as biosorbents in an activated sludge process were investigated. The adsorbents operated in an extended aeration system with a varied hydraulic retention time of between 0.5 and 1.5 d and an AIBW concentration of 40-100% for COD and phenol removal under standard conditions. Response surface methodology was utilised to optimize the process variables of the bioreactor system. Process results indicated a significant reduction of COD (79.51%, 98.01%) and phenol (61.94%, 74.44%) for BEAS and GEAS bioreactors respectively, at 1 d HRT and AIBW of 70%. Kinetic model analysis indicated that the Stover-Kincannon model best describes the system functionality, while the Grau model was better in predicting substrate removal rate and both with a precision of between R2 (0.9008-0.9988). Microbial communities examined indicated the abundance of genera, following the biosorbent addition, while RSB and BGC had no negative effect on the bioreactor's performance and bacterial community structure of biomass. Proteobacteria and Bacteroidetes were abundant in BEAS. While the GEAS achieved higher COD and phenol removal due to high Nitrosomonas, Nitrospira, Comamonas, Methanomethylovorans and Acinetobacter abundance in the activated sludge. Thus, this study demonstrated that the combination of biosorption and activated sludge processes could be promising, highly efficient, and most economical for AIBW treatment, without jeopardising the elimination of pollutants or the development of microbial communities.
Collapse
Affiliation(s)
- Ahmad Hussaini Jagaba
- Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar 32610, Perak Darul Ridzuan, Malaysia; Department of Civil Engineering, Abubakar Tafawa Balewa University, Bauchi, Nigeria.
| | - Ibrahim Mohammed Lawal
- Department of Civil Engineering, Abubakar Tafawa Balewa University, Bauchi, Nigeria; Department of Civil and Environmental Engineering, University of Strathclyde, Glasgow, UK
| | - Ayman A Ghfar
- Department of Chemistry, College of Science, King Saud University, P.O. Box 2455, Riyadh, 11451, Saudi Arabia
| | | | - Nura Shehu Aliyu Yaro
- Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar 32610, Perak Darul Ridzuan, Malaysia; Department of Civil Engineering, Ahmadu Bello University, 810107, Zaria, Kaduna State, Nigeria
| | - Azmatullah Noor
- Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar 32610, Perak Darul Ridzuan, Malaysia
| | - Kunmi Joshua Abioye
- Department of Chemical Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar 32610, Perak Darul Ridzuan, Malaysia
| | | |
Collapse
|
14
|
Wang X, Wang J, Jiang L, Jiang Y. Adsorption of Pb 2+ and Cu 2+ in wastewater by lignosulfonate adsorbent prepared from corn straw. Int J Biol Macromol 2023; 247:125820. [PMID: 37451377 DOI: 10.1016/j.ijbiomac.2023.125820] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/13/2023] [Revised: 06/18/2023] [Accepted: 07/11/2023] [Indexed: 07/18/2023]
Abstract
The heavy metal ions contained in industrial wastewater are a great threat to human health. Exploring a adsorbent which have low-cost, green environmental friendly, high adsorption capacity, good recycle is key to solve heavy metal ions pollution. Lignin sulfonate was obtained by treating corn stover, and then modified lignin sulfonate was obtained by hydrothermal method. The porous structure makes heavy metal ions occupy more internal adsorption sites. Modified lignosulfonate adsorbent efficiency removes heavy metals in wastewater especially Cu2+ and Pb2+. The adsorption capacity of Cu2+ on modified lignosulfonate is 450.3 mg g-1, Pb2+ is 475.4 mg g-1. In addition, for 40 mg L-1 Cu2+ and Pb2+ using 0.4 g L-1, the adsorption equilibrium is only reached within 60 min. Meanwhile, the removal ratio of Pb is 83 %, Cd is 72 %, Cu is 87 %, Zn is 36 %, Mn is 25 %, Cr is 95 %, and Fe is 99 % in wastewater using 0.4 g L-1 adsorbent in 2 h. This research develops a practical adsorbent to remove heavy metals from actual wastewater.
Collapse
Affiliation(s)
- Xiang Wang
- College of Environmental and Chemical Engineering, Chongqing Three Gorges University, Wanzhou, 404100 Chongqing, China.
| | - Jiwei Wang
- Chongqing Wanzhou Sanfeng Environmental Protection Power Generation Co., LTD, Wanzhou, 404100 Chongqing, China
| | - Landong Jiang
- College of Environmental and Chemical Engineering, Chongqing Three Gorges University, Wanzhou, 404100 Chongqing, China
| | - Yibo Jiang
- College of Environmental and Chemical Engineering, Chongqing Three Gorges University, Wanzhou, 404100 Chongqing, China
| |
Collapse
|
15
|
Liu Z, Ma W, Lin L, Wang Q, Yang J, Cheng Q, Xu M, Yang X, Tang F, Wang C, Zhang X. Mussel- and nacre-inspired dual-bionic alginate-based hydrogel coating with multi-matrix applicability, high separation stability and antifouling performance for oil/water separation. Int J Biol Macromol 2023; 246:125686. [PMID: 37406913 DOI: 10.1016/j.ijbiomac.2023.125686] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2023] [Revised: 06/16/2023] [Accepted: 07/02/2023] [Indexed: 07/07/2023]
Abstract
Natural hydrogel-modified porous matrices with superwetting interfaces are ideal for oil/water separation. In this study, inspired by two marine organisms, a novel hydrogel coating with multi-matrix suitability, high oil/water separation capability and antifouling properties was developed. Specifically, inspired by mussel byssus, hydrogel coating was successfully deposited on porous matrix surface based on the introduction of tannic acid (TA). Moreover, inspired by the "brick and mortar" microstructure of Pinctada nacre, silica particles were in-situ synthesized in the sodium alginate (SA)/Ca2+ hydrogel to provide the filling effect and to increase strength. Furthermore, Sodium alginate-tannic acid-tetraethyl orthosilicate (SA-TA-TEOS) hydrogel coating-modified membrane exhibited super-hydrophilic and underwater super-oleophobic performance (underwater oil contact angle >150°), and achieved efficient oil/water separation for four oil/water emulsions (flux = 493-584 L·m-2·h-1 and rejection = 97.3-99.5 %). The modified membrane also demonstrated good anti-fouling performance and flux recovery. Notably, hydrogel coating-modified non-woven fabric also had high oil/water separation capacity (rejection >98 %) and cyclic stability, which proved the universal applicability of this hydrogel coating. In short, this work provides new insights into the fabrication of hydrogel coating-modified porous materials based upon a marine organism biomimetic strategy, which has potential applications in separating oil/water emulsions in industrial scenarios.
Collapse
Affiliation(s)
- Zitian Liu
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membrane, School of Materials Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - Wensong Ma
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membrane, School of Materials Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - Ligang Lin
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membrane, School of Materials Science and Engineering, Tiangong University, Tianjin 300387, PR China.
| | - Qiying Wang
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membrane, School of Materials Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - Jing Yang
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membrane, School of Materials Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - Qi Cheng
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membrane, School of Materials Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - Meina Xu
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membrane, School of Materials Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - Xu Yang
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membrane, School of Materials Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - Fengling Tang
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membrane, School of Materials Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - Chunhong Wang
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membrane, School of Materials Science and Engineering, Tiangong University, Tianjin 300387, PR China
| | - Xiaolan Zhang
- Institute of Defense Engineering, AMS, PLA, Beijing 100036, China.
| |
Collapse
|
16
|
Chen W, Xie H, Jiang N, Guo X, Liu Z. Synthesis of magnetic sodium lignosulfonate hydrogel(Fe 3O 4@LS) and its adsorption behavior for Cd 2+ in wastewater. Int J Biol Macromol 2023; 245:125498. [PMID: 37356695 DOI: 10.1016/j.ijbiomac.2023.125498] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/05/2023] [Revised: 06/05/2023] [Accepted: 06/19/2023] [Indexed: 06/27/2023]
Abstract
Heavy metal pollution is becoming increasingly serious. Heavy metal pollutants are nonbiodegradable and can be bioenriched through the food chain, and thus, they greatly threaten the environment and human health. Hydrogels, as an ideal adsorbent, have been widely used to treat heavy metal industrial wastewater. Sodium lignosulfonate hydrogel (LS) was prepared by free-radical grafting copolymerization, and nano-Fe3O4 particles were loaded in LS by an in-situ precipitation method (Fe3O4@LS). The magnetic properties and adsorption capacity of Fe3O4@LS are closely related to the load capacity of Fe3O4. XRD, FTIR, XPS, SEM, TEM, BET, and TGA analyses of the materials were performed. Subsequently, the removal effect of the typical pollutant Cd2+ in heavy metal-polluted water was studied with Fe3O4@LS as the adsorbent. The influences of the Fe3O4@LS dosage and initial pH were investigated, and the adsorption kinetics and thermodynamics were further explored and discussed. Finally, the adsorption mechanism of Fe3O4@LS on Cd2+ was obtained. Results show that Fe3O4@LS has a more stable spatial network structure than LS, and the pore size, specific surface area and active sites increase. The maximum adsorption capacity can reach 88.00 mg/g when pH = 6 and the dosage of Fe3O4@LS is 1000 mg/L. The adsorption of Cd2+ by Fe3O4@LS conforms to pseudosecond-order kinetics and the Temkin isothermal adsorption model. Further mechanistic investigations show that the sorption of Cd2+ on Fe3O4@LS is mainly attributed to surface complexation, electrostatic attraction and coprecipitation. The coexistence of cations in water will inhibit the adsorption of Fe3O4@LS. Fe3O4@LS has superparamagnetism and a good response to an external magnetic field. The adsorption rate can still reach >60 % after four elutions with NaCl as the eluent. This material can be reused and has good application potential.
Collapse
Affiliation(s)
- Wu Chen
- College of Chemistry and Environmental Engineering, Yangtze University, Jingzhou 434023, People's Republic of China; HSE Key Laboratory of Petro China Company Limited (Yangtze University), Jingzhou 434023, People's Republic of China
| | - Huijia Xie
- College of Chemistry and Environmental Engineering, Yangtze University, Jingzhou 434023, People's Republic of China; HSE Key Laboratory of Petro China Company Limited (Yangtze University), Jingzhou 434023, People's Republic of China.
| | - Nan Jiang
- College of Chemistry and Environmental Engineering, Yangtze University, Jingzhou 434023, People's Republic of China; HSE Key Laboratory of Petro China Company Limited (Yangtze University), Jingzhou 434023, People's Republic of China
| | - Xianzhe Guo
- College of Chemistry and Environmental Engineering, Yangtze University, Jingzhou 434023, People's Republic of China; HSE Key Laboratory of Petro China Company Limited (Yangtze University), Jingzhou 434023, People's Republic of China
| | - Zhuozhuang Liu
- College of Chemistry and Environmental Engineering, Yangtze University, Jingzhou 434023, People's Republic of China; HSE Key Laboratory of Petro China Company Limited (Yangtze University), Jingzhou 434023, People's Republic of China
| |
Collapse
|
17
|
Lin W, Zhou J, Sun S. Cadmium and lead removal by Mg/Fe bimetallic oxide-loaded sludge-derived biochar: batch adsorption, kinetics, and mechanism. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:86866-86878. [PMID: 37410325 DOI: 10.1007/s11356-023-28574-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/15/2023] [Accepted: 06/29/2023] [Indexed: 07/07/2023]
Abstract
Biochar is a valuable adsorbent for the removal of heavy metals from water, and it is important to explore ways to increase its heavy metal adsorption capacity. In this study, Mg/Fe bimetallic oxide was loaded onto sewage sludge-derived biochar to enhance its heavy metal adsorption capacity. Batch adsorption experiments for the removal of Pb(II) and Cd(II) were performed to evaluate the removal efficiency of Mg/Fe layer bimetallic oxide-loaded sludge-derived biochar ((Mg/Fe)LDO-ASB). The physicochemical properties of (Mg/Fe)LDO-ASB and corresponding adsorption mechanisms were studied. The maximum adsorption capacities of (Mg/Fe)LDO-ASB for Pb(II) and Cd(II), which were calculated by isotherm model, were 408.31 and 270.41 mg/g, respectively. Adsorption kinetics and isotherms analysis showed that the dominant adsorption process of Pb(II) and Cd(II) uptake by (Mg/Fe)LDO-ASB was spontaneous chemisorption and heterogeneous multilayer adsorption, and film diffusion was the rate-limiting step. SEM-EDS, FTIR, XRD, and XPS analyses revealed that the Pb and Cd adsorption processes of (Mg/Fe)LDO-ASB involved oxygen-containing functional group complexation, mineral precipitation, electron-π-metal interactions, and ion exchange. The order of their contribution was as follows: mineral precipitation (Pb: 87.92% and Cd: 79.91%) > ion exchange (Pb: 9.84% and Cd: 16.45%) > metal-π interaction (Pb: 0.85% and Cd: 0.73%) > oxygen-containing functional group complexation (Pb: 1.39% and Cd: 2.91%). Mineral precipitation was the main adsorption mechanism, and ion exchange played a crucial role in Pb and Cd adsorption.
Collapse
Affiliation(s)
- Weixiong Lin
- School of Environmental and Chemical Engineering, Zhaoqing University, Zhaoqing, 526061, China.
| | - Jiali Zhou
- School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou, 510006, China
| | - Shuiyu Sun
- School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou, 510006, China
- Guangdong Polytechnic of Environmental Protection Engineering, Foshan, 528216, China
| |
Collapse
|
18
|
Yin X, Ke T, Zhu H, Xu P, Wang H. Efficient Removal of Heavy Metals from Aqueous Solution Using Licorice Residue-Based Hydrogel Adsorbent. Gels 2023; 9:559. [PMID: 37504438 PMCID: PMC10379308 DOI: 10.3390/gels9070559] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2023] [Revised: 07/05/2023] [Accepted: 07/06/2023] [Indexed: 07/29/2023] Open
Abstract
The removal of heavy metals through adsorption represents a highly promising method. This study focuses on the utilization of an abundant cellulose-rich solid waste, licorice residue (LR), as a natural material for hydrogel synthesis. To this end, LR-EPI hydrogels, namely, LR-EPI-5, LR-EPI-6 and LR-EPI-8, were developed by crosslinking LR with epichlorohydrin (EPI), specifically targeting the removal of Pb, Cu, and Cr from aqueous solutions. Thorough characterizations employing Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy confirmed the successful crosslinking of LR-EPIs by EPI, resulting in the formation of porous and loosely structured hydrogels. Batch studies demonstrated the high efficacy of LR-EPI hydrogels in removing the three heavy metal ions from aqueous solutions. Notably, LR-EPI-8 exhibited the highest adsorption capacity, with maximum capacities of 591.8 mg/g, 458.3 mg/g, and 121.4 mg/g for Pb2+, Cr3+, and Cu2+, respectively. The adsorption processes for Pb2+ and Cu2+ were well described by pseudo-second-order kinetics and the Langmuir model. The adsorption mechanism of LR-EPI-8 onto heavy metal ions was found to involve a combination of ion-exchange and electrostatic interactions, as inferred from the results obtained through X-ray photoelectron spectroscopy and FTIR. This research establishes LR-EPI-8 as a promising adsorbent for the effective removal of heavy metal ions from aqueous solutions, offering an eco-friendly approach for heavy metal removal and providing an environmentally sustainable method for the reutilization of Chinese herb residues. It contributes to the goal of "from waste, treats waste" while also addressing the broader need for heavy metal remediation.
Collapse
Affiliation(s)
- Xiaochun Yin
- Department of Civil Engineering, New Mexico State University, Las Cruces, NM 88003, USA
- School of Public Health, Gansu University of Chinese Medicine, Lanzhou 730000, China
| | - Ting Ke
- School of Public Health, Gansu University of Chinese Medicine, Lanzhou 730000, China
| | - Hai Zhu
- School of Public Health, Gansu University of Chinese Medicine, Lanzhou 730000, China
| | - Pei Xu
- Department of Civil Engineering, New Mexico State University, Las Cruces, NM 88003, USA
| | - Huiyao Wang
- Department of Civil Engineering, New Mexico State University, Las Cruces, NM 88003, USA
| |
Collapse
|
19
|
Wan X, Qiu G, Yves-Gaël Gbahouo A, Li Q, Wang G, Yang F. Synergistic removal of Cd(II)-organic complexes by combined permanent magnetic resins. CHEMOSPHERE 2023:139117. [PMID: 37285983 DOI: 10.1016/j.chemosphere.2023.139117] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/10/2023] [Revised: 05/22/2023] [Accepted: 06/01/2023] [Indexed: 06/09/2023]
Abstract
Due to the enormous threat of pollution by heavy metal ions and organics, the effective removal of HMIs-organic complexes from various wastewater is of vital importance. In this study, synergistic removal of Cd(II) and para-aminobenzoic acid (PABA) by combined permanent magnetic anion-/cation-exchange resin (MAER/MCER) was examined in batch adsorption experiments. The Cd(II) adsorption isotherms fitted the Langmuir model at all tested conditions, suggesting a monolayer adsorption nature in both the sole and binary systems. Moreover, the Elovich kinetic model fitting demonstrated a heterogeneous diffusion of Cd(II) by the combined resins. At the organic acids (OAs) concentration of 10 mmol/L (molar ratio of OAs: Cd = 20:1), the adsorption capacities of Cd(II) by MCER decreased by 26.0, 25.2, 44.6, and 28.6%, respectively, under the coexistence of tannic acid, gallic acid, citric acid and tartaric acid, indicating the high affinity of MCER towards Cd(II). The MCER displayed high selectivity towards Cd(II) in the presence of 100 mmol/L of NaCl, with the adsorption capacity of Cd(II) decreasing by 21.4%. The "salting out" effect also promoted the uptake of PABA. Decomplexing-adsorption of Cd(II) by MCER and selective adsorption of PABA by MAER were proposed as the predominant mechanism for the synergistic removal of Cd(II) and PABA from the mixed Cd/PABA solution. The PABA bridging on MAER surface could promote the uptake of Cd(II). The combined MAER/MCER showed excellent reusability during five reuse cycles, indicative of the great potential in the removal of HMIs-organics from various wastewater.
Collapse
Affiliation(s)
- Xiang Wan
- School of Environment, Nanjing Normal University, Nanjing, 210023, China; Jiangsu Center for Collaborative Innovation in Geographical Information Resource Development and Application, Jiangsu Engineering Lab of Water and Soil Eco-remediation, Nanjing, 210023, China
| | - Guoyu Qiu
- School of Environment, Nanjing Normal University, Nanjing, 210023, China; Jiangsu Center for Collaborative Innovation in Geographical Information Resource Development and Application, Jiangsu Engineering Lab of Water and Soil Eco-remediation, Nanjing, 210023, China
| | - Adhean Yves-Gaël Gbahouo
- School of Environment, Nanjing Normal University, Nanjing, 210023, China; Jiangsu Center for Collaborative Innovation in Geographical Information Resource Development and Application, Jiangsu Engineering Lab of Water and Soil Eco-remediation, Nanjing, 210023, China
| | - Qimeng Li
- School of Environment, Nanjing Normal University, Nanjing, 210023, China; Jiangsu Center for Collaborative Innovation in Geographical Information Resource Development and Application, Jiangsu Engineering Lab of Water and Soil Eco-remediation, Nanjing, 210023, China.
| | - Guoxiang Wang
- School of Environment, Nanjing Normal University, Nanjing, 210023, China; Jiangsu Center for Collaborative Innovation in Geographical Information Resource Development and Application, Jiangsu Engineering Lab of Water and Soil Eco-remediation, Nanjing, 210023, China
| | - Fei Yang
- School of Environment, Nanjing Normal University, Nanjing, 210023, China; Jiangsu Center for Collaborative Innovation in Geographical Information Resource Development and Application, Jiangsu Engineering Lab of Water and Soil Eco-remediation, Nanjing, 210023, China; Nanjing Institute of Environmental Sciences, Ministry of Ecology and Environment, Nanjing, 210042, China.
| |
Collapse
|
20
|
Flores-Valenzuela LE, González-Fernández JV, Carranza-Oropeza MV. Hydrogel Applicability for the Industrial Effluent Treatment: A Systematic Review and Bibliometric Analysis. Polymers (Basel) 2023; 15:polym15112417. [PMID: 37299216 DOI: 10.3390/polym15112417] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/09/2023] [Revised: 05/15/2023] [Accepted: 05/17/2023] [Indexed: 06/12/2023] Open
Abstract
In recent decades, hydrogels, as adsorption materials, have received important attention due to their characteristics and properties, such as mechanical strength, biocompatibility, biodegradability, swellability, and stimuli sensitivity. In the actual framework of sustainable development, it has been imperative to develop practical studies of hydrogels in the treatment of actual industrial effluents. Accordingly, the current work has, as its objective, to make evident hydrogels' applicability in the treatment of actual industrial effluents. For this purpose, a bibliometric analysis and systematic review based on the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) method were conducted. The relevant articles were selected from the Scopus and Web of Science databases. Some important findings were that: (1) China is the leading country when it comes to hydrogel application in actual industrial effluents, (2) the motor studies are focalized on the treatment of wastewater by hydrogels, (3) the fixed-bed columns are suitable unit equipment for the treatment of industrial effluents of using hydrogels, and (4) the hydrogels show excellent adsorption capacities of ion and dye contaminants present in industrial effluents. In summary, since the implementation of sustainable development in 2015, the progress of practical hydrogel applications in the treatment of industrial effluent has been receiving more attention, and the selected studies demonstrate the implementation viability of these materials.
Collapse
|
21
|
Patel PK, Pandey LM, Uppaluri RVS. Cyclic desorption based efficacy of polyvinyl alcohol-chitosan variant resins for multi heavy-metal removal. Int J Biol Macromol 2023; 242:124812. [PMID: 37178895 DOI: 10.1016/j.ijbiomac.2023.124812] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/27/2023] [Revised: 04/16/2023] [Accepted: 05/07/2023] [Indexed: 05/15/2023]
Abstract
The simultaneous removal of Cu, Pb and Fe from water bodies has been targeted in this work with polyvinyl alcohol (PVA) and chitosan (low, medium, and high molecular weight) derivative and with cyclic desorption efficacy target. For a varied range of adsorbent loading (0.2-2 g L-1), initial concentration (187.7-563.1 mg L-1 for Cu, 5.2-15.6 mg L-1 for Pb, and 61.85-185.55 mg L-1 for Fe), and resin contact time (5 to 720 min), batch adsorption-desorption studies were conducted. After first adsorption-desorption cycle, the optimum absorption capacity was 6.85 mg g-1 for Pb, 243.90 mg g-1 for Cu, and 87.72 mg g-1 for Fe for the high molecular weight chitosan grafted polyvinyl alcohol resin (HCSPVA). The alternate kinetic and equilibrium models were analyzed along with the interaction mechanism between metal ions and functional groups. The cyclic desorption studies were carried out with simple eluent systems such as HCl, HNO3, H2SO4, KOH, and NaOH. The experiments revealed that the HCSPVA derivative has been an impressive, reusable, and effective sorbent for the mitigation of Pb, Fe, and Cu in complex wastewater systems. This is due to its easy synthesis, excellent adsorption capacity, quick sorption rate, and remarkable regeneration capabilities.
Collapse
Affiliation(s)
- Prabhat Kumar Patel
- Centre for the Environment, Indian Institute of Technology Guwahati, North Guwahati 781039, Assam, India
| | - Lalit Mohan Pandey
- Department of Biosciences and Bioengineering, Indian Institute of Technology Guwahati, North Guwahati 781039, Assam, India
| | - Ramagopal V S Uppaluri
- Department of Chemical Engineering, Indian Institute of Technology Guwahati, North Guwahati 781039, Assam, India.
| |
Collapse
|
22
|
Shi Q, Yan S, Wang C, Zeng C, Hu H, Chen M, Chen M, Zhang Q. Enhanced selective copper precipitation by mechanochemically activated benzene tricarboxylic acid. ENVIRONMENTAL TECHNOLOGY 2023; 44:1798-1807. [PMID: 34842054 DOI: 10.1080/09593330.2021.2012271] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/03/2021] [Accepted: 11/19/2021] [Indexed: 06/13/2023]
Abstract
Toward the treatment of waste solution containing heavy metals, direct precipitation of the metal ions from an acidic solution without alkaline neutralisation is still the greatest challenge. Based on the ligand properties of benzene tricarboxylic acid (BTC) to copper ions, a simple ball milling with 90 min at 400 rpm was used to activate BTC to enhance its capacity for copper removal from the pH of the original solution around 3-4. A set of analytical methods were used to characterise the activated BTC sample and BTC-Cu precipitate before and after copper precipitation. Compared with the raw BTC, the activated BTC could efficiently remove copper ions over 90% from an initial copper concentration of 100 mg/L in a shorter time from an acidic media with lower pH of around 2.60 and the maximum adsorption capacity can be stable at about 111.70 mg/g, resulting from probably the enhanced deprotonation effect for copper incorporation. Furthermore, at controlled dosage, the activated BTC demonstrated much high selectivity on precipitating copper ions from other heavy metals of Ni, Mn, Zn and Cd and provided a new approach for easy copper recycling from waste solution as secondary sources. This process may serve the purpose of recycling both metal and acidic solutions after the purification.
Collapse
Affiliation(s)
- Qing Shi
- School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Shanshan Yan
- School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Chao Wang
- School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Chaocheng Zeng
- School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Huimin Hu
- School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Mengfei Chen
- School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Min Chen
- School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Qiwu Zhang
- School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan, People's Republic of China
| |
Collapse
|
23
|
Zhang X, Peng J, Qi X, Huang Y, Qiao J, Guo Y, Guo X, Wu Y. Nanocellulose/carbon dots hydrogel as superior intensifier of ZnO/AgBr nanocomposite with adsorption and photocatalysis synergy for Cr(VI) removal. Int J Biol Macromol 2023; 233:123566. [PMID: 36758761 DOI: 10.1016/j.ijbiomac.2023.123566] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/18/2022] [Revised: 02/01/2023] [Accepted: 02/02/2023] [Indexed: 02/10/2023]
Abstract
A novel nanocellulose/carbon dots hydrogel (NCH) was fabricated using cellulose nanofibrils (CN), carbon dots (CD) and zinc oxide (ZnO)/silver bromide (AgBr) nanocomposite, where CD enhanced amino group-induced adsorption of hexavalent chromium (Cr(VI)) and promoted the photocatalytic properties of ZnO/AgBr nanocomposite via the transfer of photogenerated electrons, resulting in enhanced efficiency in the removal of Cr(VI) from aqueous solution. The structure, morphology, and physicochemical properties of the prepared NCH were characterized, with the results of adsorption and photocatalysis experiments showing the maximum theoretical adsorption capacity of the NCH to be 315 mg/g, 219 times that of the ZnO/AgBr nanocomposite; the apparent removal rate constant of the NCH was 0.0319 min-1, 11.7 times that of the ZnO/AgBr nanocomposite. Furthermore, the removal performance of NCH was attributed to CD-enhanced synergistic adsorption and photocatalysis effects, supported by characterization and experimental results. This work provides insight into the design and fabrication of a novel adsorptive photocatalyst with CD-enhanced synergistic adsorption and photocatalysis effects for removing Cr(VI) from aqueous solution.
Collapse
Affiliation(s)
- Xuefeng Zhang
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China
| | - Junwen Peng
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China
| | - Xinmiao Qi
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China
| | - Yong Huang
- Joint International Research Laboratory of Biomass Energy and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Jianzheng Qiao
- College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004, China
| | - Yucong Guo
- State Key Laboratory for Structural Chemistry of Unstable and Stable Species, Beijing National Laboratory for Molecular Sciences (BNLMS), CAS Research/Education Center for Excellence in Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China
| | - Xin Guo
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China.
| | - Yiqiang Wu
- College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004, China.
| |
Collapse
|
24
|
Qi X, Peng J, Zhang X, Cai H, Huang Y, Qiao J, Guo Y, Guo X, Wu Y. Computer chip-inspired design of nanocellulose/carbon dots hydrogel as superior intensifier of nano-sized photocatalyst for effective Cr(VI) removal. JOURNAL OF HAZARDOUS MATERIALS 2023; 446:130689. [PMID: 36586334 DOI: 10.1016/j.jhazmat.2022.130689] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/21/2022] [Revised: 12/26/2022] [Accepted: 12/27/2022] [Indexed: 06/17/2023]
Abstract
Hydrogel, a common carrier of photocatalyst that suffers from compromised catalytic efficiency, is still far from practical application. Herein, based on "computer chip-inspired design", a novel nanocellulose/carbon dots hydrogel (NCH) was fabricated as superior intensifier instead of common carrier of sodium titanate nanofibre (STN), where carbon dots (CDs) enhanced amino group-induced adsorption for Cr(VI), promoted photocatalytic properties of STN via transferring the photogenerated electron-hole pairs and improved amino group-induced desorption for reduced product (Cr(III)) via electrostatic repulsion, showing an efficiency of 1 + 1 > 2. Adsorption and photocatalysis experiments demonstrated superior removal performance of the NCH incorporating STN, as shown by theoretical maximum adsorption capacity of 425.74 mg/g and kinetic constant of 0.0374 min-1 in the photocatalytic process, which was nearly 6.6 and 7.3 times of STN. A series of experiments was conducted to confirm the novel mechanism of CDs-enhanced adsorption-photocatalysis-desorption synergy. This work not only provides new insights into the fabrication of a superior intensifier for nanosized photocatalyst, but also proposes one new mechanism of CDs-enhanced adsorption-photocatalysis-desorption synergy, which is helpful for designing and optimizing nanosized photocatalyst.
Collapse
Affiliation(s)
- Xinmiao Qi
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China
| | - Junwen Peng
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China
| | - Xuefeng Zhang
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China
| | - Haoxuan Cai
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China
| | - Yong Huang
- Joint International Research Laboratory of Biomass Energy and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Jianzheng Qiao
- College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004, China
| | - Yucong Guo
- Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China
| | - Xin Guo
- College of Science, Central South University of Forestry and Technology, Changsha 410004, China.
| | - Yiqiang Wu
- College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004, China
| |
Collapse
|
25
|
Ezzeddine Z, Batonneau-Gener I, Pouilloux Y. Zinc Removal from Water via EDTA-Modified Mesoporous SBA-16 and SBA-15. TOXICS 2023; 11:205. [PMID: 36976971 PMCID: PMC10059989 DOI: 10.3390/toxics11030205] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/02/2023] [Revised: 02/19/2023] [Accepted: 02/21/2023] [Indexed: 06/18/2023]
Abstract
The removal of zinc ions from water was investigated using two types of ordered mesoporous silica (SBA-15 and SBA-16). Both materials were functionalized with APTES (3-aminopropyltriethoxy-silane) and EDTA (ethylenediaminetetraacetic acid) through post grafting methods. The modified adsorbents were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), X-ray diffraction (XRD), nitrogen (N2) adsorption-desorption analysis, Fourier transform infrared spectroscopy (FT-IR), and thermogravimetric analysis. The ordered structure of the adsorbents was conserved after modification. SBA-16 was found to be more efficient than SBA-15 owing to its structural characteristics. Different experimental conditions were examined (pH, contact time, and initial zinc concentration). The kinetic adsorption data followed the pseudo-second-order model indicating favorable adsorption conditions. The intra-particle diffusion model plot represented a two-stage adsorption process. The maximum adsorption capacities were calculated by the Langmuir model. The adsorbent can be regenerated and reused several times without a significant decline in adsorption efficiency.
Collapse
Affiliation(s)
- Zeinab Ezzeddine
- Institut de Chimie des Milieux et Matériaux de Poitiers (IC2MP)-UMR 7285, Poitiers University, 86073 Poitiers, France
- Department of Chemistry, Lebanese University, Beirut P.O. Box 6573, Lebanon
| | - Isabelle Batonneau-Gener
- Institut de Chimie des Milieux et Matériaux de Poitiers (IC2MP)-UMR 7285, Poitiers University, 86073 Poitiers, France
| | - Yannick Pouilloux
- Institut de Chimie des Milieux et Matériaux de Poitiers (IC2MP)-UMR 7285, Poitiers University, 86073 Poitiers, France
| |
Collapse
|
26
|
Zhan Z, Chen L, Wang C, Shuai Y, Duan H, Wang Z. Super Water-Storage Self-Adhesive Gel for Solar Vapor Generation and Collection. ACS APPLIED MATERIALS & INTERFACES 2023; 15:8181-8189. [PMID: 36720174 DOI: 10.1021/acsami.2c21555] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Water treatment consumes lots of energy from fossil fuels nowadays, and the emission of CO2 enhances the temperature on earth, resulting in more and more hazards. Thus, clean water production enabled by green energy without CO2 emission is attracting more and more attention. Herein, we propose a novel solar evaporation system achieving both solar evaporation and water storage with two different unique hydrogels based on a three-dimensional (3D) printing technique. The hydrogel absorber demonstrates an ultrahigh absorptance (98.2%) of solar light, while the water-storage hydrogel absorbs more than 100 times its own weight of water, demonstrating super water-storage performance with strong self-adhesiveness. The solar vapor generation rate can be as high as 3.14 kg·m-2·h-1, with a solar evaporation efficiency up to 91.2% irradiated by 1.43 sun. Furthermore, our environmentally friendly solar evaporation system achieves ultrahigh water purification efficiency of 99.99% for salt, heavy ions, and acid/alkaline with remarkable stability and durability. Our solar evaporation system promises long-lasting applications for the hydrological cycle enabled by solar energy, such as seawater desalination, sterilization, wastewater purification, and so on.
Collapse
Affiliation(s)
- Ziheng Zhan
- Interdisciplinary Research Center of Low-carbon Technology and Equipment, College of Mechanical and Vehicle Engineering, Hunan University, Changsha410082, P. R. China
| | - Lei Chen
- Interdisciplinary Research Center of Low-carbon Technology and Equipment, College of Mechanical and Vehicle Engineering, Hunan University, Changsha410082, P. R. China
| | - Chao Wang
- Qian Xuesen Laboratory of Space Technology, China Academy of Space Technology (CAST), Beijing100094, P. R. China
| | - Yong Shuai
- School of Energy Science and Engineering, Harbin Institute of Technology, Harbin150001, P. R. China
| | - Huigao Duan
- Interdisciplinary Research Center of Low-carbon Technology and Equipment, College of Mechanical and Vehicle Engineering, Hunan University, Changsha410082, P. R. China
| | - Zhaolong Wang
- Interdisciplinary Research Center of Low-carbon Technology and Equipment, College of Mechanical and Vehicle Engineering, Hunan University, Changsha410082, P. R. China
| |
Collapse
|
27
|
Sayago UFC, Ballesteros Ballesteros V. Development of a treatment for water contaminated with Cr (VI) using cellulose xanthogenate from E. crassipes on a pilot scale. Sci Rep 2023; 13:1970. [PMID: 36737449 PMCID: PMC9898558 DOI: 10.1038/s41598-023-28292-x] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/14/2022] [Accepted: 01/16/2023] [Indexed: 02/05/2023] Open
Abstract
Water care is an imperative duty in industries with effluents loaded with pollutants such as heavy metals, especially chromium (VI), extremely dangerous for humans and the environment. One way of treating water is possible through a continuous system with dry and crushed vegetable biomass of cellulose xanthogenate because it can adsorb heavy metals, especially due to its low production costs. Through continuous systems and with the waste of PET plastics, it is possible to develop a water treatment process adapting this system and biomass. The objective of this research is the development of a treatment for water contaminated with Cr (VI) using cellulose xanthogenate from E. crassipes on a pilot scale. Where a mass balance conducted to determine the adsorption capacity of this heavy metal, corroborating it through the Thomas model. The treatment process eliminated around 95% of Cr (VI) present in the water, in addition, biomass reuse cycles carried out, which maintained a considerable adsorption capacity in all the cycles conducted through EDTA reagent.
Collapse
|
28
|
Sayago UFC, Ballesteros Ballesteros V. Development of a treatment for water contaminated with Cr (VI) using cellulose xanthogenate from E. crassipes on a pilot scale. Sci Rep 2023; 13:1970. [DOI: https:/doi.org/10.1038/s41598-023-28292-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/14/2022] [Accepted: 01/16/2023] [Indexed: 06/06/2024] Open
Abstract
AbstractWater care is an imperative duty in industries with effluents loaded with pollutants such as heavy metals, especially chromium (VI), extremely dangerous for humans and the environment. One way of treating water is possible through a continuous system with dry and crushed vegetable biomass of cellulose xanthogenate because it can adsorb heavy metals, especially due to its low production costs. Through continuous systems and with the waste of PET plastics, it is possible to develop a water treatment process adapting this system and biomass. The objective of this research is the development of a treatment for water contaminated with Cr (VI) using cellulose xanthogenate from E. crassipes on a pilot scale. Where a mass balance conducted to determine the adsorption capacity of this heavy metal, corroborating it through the Thomas model. The treatment process eliminated around 95% of Cr (VI) present in the water, in addition, biomass reuse cycles carried out, which maintained a considerable adsorption capacity in all the cycles conducted through EDTA reagent.
Collapse
|
29
|
Feng Z, Zheng Y, Wang H, Feng C, Chen N, Wang S. Sodium humate based double network hydrogel for Cu and Pb removal. CHEMOSPHERE 2023; 313:137558. [PMID: 36526144 DOI: 10.1016/j.chemosphere.2022.137558] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/27/2022] [Revised: 12/07/2022] [Accepted: 12/11/2022] [Indexed: 06/17/2023]
Abstract
Sodium humate (SH) is one of the derivatives humic substances, which can be utilized for heavy metal removal from water due to its containing plenty of functional groups. In this study, a double network hydrogel SH/polyacrylamide (SH/PAM) was synthesized by a simple free-radical polymerization and used for Cu2+ and Pb2+ removal from water. The adsorption process can be well described by Langmuir-Freundlich model, indicating that both physical and chemical adsorption were involved. X-ray photoelectron spectroscopy (XPS) characterization demonstrated that complexation was the main mechanism for the adsorption. Two-dimensional correlation analysis of FTIR (2D-FTIR-COS) results showed that the variation order of functional groups during Cu2+ and Pb2+ adsorption in the following order: COOH ≈ -CO > -OH > C-O and -COOH ≈ C-O > -CO > -OH, respectively. According to the density functional theory (DFT) calculation results, the O atom of SH in the COO- was the main adsorption site. Meanwhile, the adsorption energy of Pb2+ was more negative than that of Cu2+ and the orbital hybridization between O atom of SH and Pb2+ was denser than that of Cu2+, which suggested that SH/PAM had a stronger combining capacity for Pb2+ than Cu2+. Therefore, the adsorption capacity for Pb2+ was larger than Cu2+. Moreover, the removal efficiencies are 30.2% for Al, 98.79% for Cu, 99.0% for Fe, 17.2% for Mn, 93.4% for Pb, and 62.4% for Zn in actual acid mine drainage using 6 g L-1 adsorbent. Collectively, this study not only provided a new adsorbent for heavy metal removal but also explicated the mechanism of heavy metal removal by SH from molecule and electron perspective, which is helpful for the application of SH in the environmental field.
Collapse
Affiliation(s)
- Zhengyuan Feng
- School of Water Resources and Environment, MOE Key Laboratory of Groundwater Circulation and Environmental Evolution, China University of Geosciences (Beijing), Beijing, 100083, PR China
| | - Yuhan Zheng
- College of Environmental Sciences and Engineering, Peking University, Beijing, 100084, PR China
| | - Haishuang Wang
- School of Water Resources and Environment, MOE Key Laboratory of Groundwater Circulation and Environmental Evolution, China University of Geosciences (Beijing), Beijing, 100083, PR China
| | - Chuanping Feng
- School of Water Resources and Environment, MOE Key Laboratory of Groundwater Circulation and Environmental Evolution, China University of Geosciences (Beijing), Beijing, 100083, PR China.
| | - Nan Chen
- School of Water Resources and Environment, MOE Key Laboratory of Groundwater Circulation and Environmental Evolution, China University of Geosciences (Beijing), Beijing, 100083, PR China.
| | - Shizhong Wang
- School of Environmental Science and Engineering, Guangdong Provincial Key Lab of Environmental Pollution Control and Remediation Technology, Sun Yat-sen University, Guangzhou, 510275, PR China
| |
Collapse
|
30
|
Wang W, Zhang C, He J, Peng W, Cao Y, Liu J, Huang Y, Fan G. Chitosan-induced self-assembly of montmorillonite nanosheets along the end-face for methylene blue removal from water. Int J Biol Macromol 2023; 227:952-961. [PMID: 36565829 DOI: 10.1016/j.ijbiomac.2022.12.206] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/05/2022] [Revised: 12/16/2022] [Accepted: 12/17/2022] [Indexed: 12/24/2022]
Abstract
In this study, chitosan-induced self-assembly of montmorillonite nanosheets (MMTNS) along the end-face to form the layered and porous structured composite with high adsorption capacity towards MB dye wastewater was investigated. The self-assembly process was driven by the hydrogen-bond interaction among -OH groups distributed along the end-face of MMTNS and -NH2 groups on chitosan (CS) chain, which finally formed the infinite two-dimensional lamellae. This technology remained the exposed adsorption sites on MMTNS surface, and solved the separation issue of spent MMTNS from water, making MMTNS/CS an excellent adsorption material for macromolecular MB dye. The maximum adsorption capacity of MMTNS/CS towards MB reached 243 mg/g, which was achieved via the Na+- exchange, hydrogen-bond and n-π stacking interactions with MB molecules. This work aimed at breaking through the bottleneck of small adsorption capacity of traditional MMT adsorbents, solving the problem of solid-liquid separation of nanosheets, and effectively reducing the adsorption cost, which might guide an important direction for adsorption material design and development in the future.
Collapse
Affiliation(s)
- Wei Wang
- Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou, Henan 450001, PR China; School of Chemical Engineering, Zhengzhou University, Zhengzhou, Henan 450001, PR China; Longmen laboratory, Luoyang, Henan 471000, PR China
| | - Chongyu Zhang
- Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou, Henan 450001, PR China; School of Chemical Engineering, Zhengzhou University, Zhengzhou, Henan 450001, PR China
| | - Jianyong He
- Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou, Henan 450001, PR China
| | - Weijun Peng
- Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou, Henan 450001, PR China; School of Chemical Engineering, Zhengzhou University, Zhengzhou, Henan 450001, PR China.
| | - Yijun Cao
- Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou, Henan 450001, PR China; School of Chemical Engineering, Zhengzhou University, Zhengzhou, Henan 450001, PR China.
| | - Jiang Liu
- Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou, Henan 450001, PR China
| | - Yukun Huang
- Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou, Henan 450001, PR China
| | - Guixia Fan
- Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou, Henan 450001, PR China
| |
Collapse
|
31
|
Zhao H, Sun J, Du Y, Zhang M, Yang Z, Su J, Peng X, Liu X, Sun G, Cui Y. In-situ immobilization of CuMOF on sodium alginate/chitosan/cellulose nanofibril composite hydrogel for fast and highly efficient removal of Pb2+ from aqueous solutions. J SOLID STATE CHEM 2023. [DOI: 10.1016/j.jssc.2023.123928] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/25/2023]
|
32
|
Divalent metal ion removal from simulated water using sustainable starch aerogels: Effect of crosslinking agent concentration and sorption conditions. Int J Biol Macromol 2023; 226:628-645. [PMID: 36464191 DOI: 10.1016/j.ijbiomac.2022.11.308] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/25/2022] [Revised: 11/26/2022] [Accepted: 11/29/2022] [Indexed: 12/03/2022]
Abstract
This paper evaluates corn starch aerogels, studying different crosslinking agent (trisodium citrate) concentrations (1:1, 1:1.5, and 1:2) and sorption conditions (contact time, adsorbent weight, and initial concentration) regarding the potentially toxic elements (PTEs) [Cd(II) or Zn(II)] adsorption of the aqueous systems. Besides, other properties of aerogels, such as structural properties, specific surface area, and mechanical performance, were evaluated. For adsorption results, better values were observed in adsorption capacity and efficiency for the initial concentration of 100 ppm. In addition, an adsorption time of 12 h and an adsorbent weight of 3.0 g obtained better results due to the possible balance in this time and the high specific surface area available for Cd(II) adsorption. As for the type of adsorbent, the Aero 1:1.5 sample (intermediate crosslinking agent concentration) obtained better results, possibly due to the high porosity, smaller pore sizes, high pore density, and high specific surface area (198 m2·g-1). In addition, hydroxyl groups in the starch aerogel removed Cd(II) ions with 30 % adsorption efficiency. Lastly, Aero 1:1.5 obtained a high mechanical strength at compression and a satisfactory compressive modulus. In contrast, starch aerogels did not absorb the Zn(II) ion.
Collapse
|
33
|
Heidarian P, Kouzani AZ. Starch-g-Acrylic Acid/Magnetic Nanochitin Self-Healing Ferrogels as Flexible Soft Strain Sensors. SENSORS (BASEL, SWITZERLAND) 2023; 23:s23031138. [PMID: 36772177 PMCID: PMC9920654 DOI: 10.3390/s23031138] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/21/2022] [Revised: 01/16/2023] [Accepted: 01/18/2023] [Indexed: 06/01/2023]
Abstract
Mechanically robust ferrogels with high self-healing ability might change the design of soft materials used in strain sensing. Herein, a robust, stretchable, magneto-responsive, notch insensitive, ionic conductive nanochitin ferrogel was fabricated with both autonomous self-healing and needed resilience for strain sensing application without the need for additional irreversible static chemical crosslinks. For this purpose, ferric (III) chloride hexahydrate and ferrous (II) chloride as the iron source were initially co-precipitated to create magnetic nanochitin and the co-precipitation was confirmed by FTIR and microscopic images. After that, the ferrogels were fabricated by graft copolymerisation of acrylic acid-g-starch with a monomer/starch weight ratio of 1.5. Ammonium persulfate and magnetic nanochitin were employed as the initiator and crosslinking/nano-reinforcing agents, respectively. The ensuing magnetic nanochitin ferrogel provided not only the ability to measure strain in real-time under external magnetic actuation but also the ability to heal itself without any external stimulus. The ferrogel may also be used as a stylus for a touch-screen device. Based on our findings, our research has promising implications for the rational design of multifunctional hydrogels, which might be used in applications such as flexible and soft strain sensors, health monitoring, and soft robotics.
Collapse
|
34
|
Tran DT, Vu DT, Le MC. Adsorptive removal of heavy metals from water using thermally treated laterite: an approach for production of drinking water from rain water. J DISPER SCI TECHNOL 2023. [DOI: 10.1080/01932691.2023.2165094] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/13/2023]
Affiliation(s)
- Dinh-Trinh Tran
- VNU Key Lab. of Advanced Materials for Green Growth, University of Science, Vietnam National University, Hanoi, Vietnam
| | - Duc-Toan Vu
- Research of Organic Matter (ROOM), Environmental and Life Science Research Laboratory, Thuyloi University, Hanoi, Vietnam
| | - Manh-Cuong Le
- Faculty Building Material, Hanoi University of Civil Engineering, Hanoi, Vietnam
| |
Collapse
|
35
|
A graphene-based porous composite hydrogel for efficient heavy metal ions removal from wastewater. Sep Purif Technol 2023. [DOI: 10.1016/j.seppur.2022.122484] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
|
36
|
Ma M, Wang T, Ke X, Liu Y, Song Y, Shang X, Li J, Han Q. A novel slag composite for the adsorption of heavy metals: Preparation, characterization and mechanisms. ENVIRONMENTAL RESEARCH 2023; 216:114442. [PMID: 36202245 DOI: 10.1016/j.envres.2022.114442] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/05/2022] [Revised: 08/13/2022] [Accepted: 09/23/2022] [Indexed: 06/16/2023]
Abstract
The utilization of solid waste for resource recovery and production of value-added products is the theme of green chemistry. Currently, how to using solid wastes to prepare environmentally-functional materials with high performance and strength is one of the hot topics. In this research, electrolytic manganese residue (EMR) was thermally activated with calcite to prepare a silicon-based functionalized adsorbent (C-EMR) for the removal of cadmium (Cd2+, 467.14 mg/g) and lead (Pb2+, 972 mg/g). The thermodynamic results indicated that the removal process of Cd2+ and Pb2+ by C-EMR were endothermic and spontaneous. HNO3 can effectively strip the two adsorbed metals from C-EMR with the stripping efficiency of nearly 80% for Cd2+ and 99.92% for Pb2+, indicating that adsorption and ion exchange may be the main reason for the removal of the metals on C-EMR. Besides, surface precipitation was also responsible for removing some Pb2+ from the aquatic environment according to the X-ray photoelectron spectrometry (XPS) analysis. Results indicate that -SiO3- has stronger affinity with Pb2+ and Cd2+ than other groups ((-MnO2), -OH) by theoretical calculation (VASP, GGA-PBE). This study shows that this novel adsorbent (C-EMR) can be adopted as an environmentally-friendly, inexpensive and efficient adsorbent for removal of Cd2+ and Pb2+ from aquatic solution. This technique not only provides potential adsorbent for the elimination of heavy metals but also proposes an alternative route for the treatment and utilization of waste solid.
Collapse
Affiliation(s)
- Mengyu Ma
- College of Resources and Environmental Science, South-Central Minzu University, Wuhan, 430074, China; Hubei Novel Reactor & Green Chemical Technology Key Laboratory, Key Laboratory for Green Chemical Process of Ministry of Education, School of Chemistry and Environmental Engineering, Wuhan Institute of Technology, Wuhan, 430074, China
| | - Ting Wang
- College of Resources and Environmental Science, South-Central Minzu University, Wuhan, 430074, China
| | - Xuan Ke
- College of Resources and Environmental Science, South-Central Minzu University, Wuhan, 430074, China
| | - Yanchang Liu
- College of Resources and Environmental Science, South-Central Minzu University, Wuhan, 430074, China
| | - Yunjie Song
- College of Resources and Environmental Science, South-Central Minzu University, Wuhan, 430074, China
| | - Xiaojie Shang
- College of Resources and Environment, Gansu Agricultural University, Lanzhou, 730070, China
| | - Jia Li
- College of Resources and Environmental Science, South-Central Minzu University, Wuhan, 430074, China.
| | - Qingwen Han
- Three Gorges Laboratory, Yichang, 443007, China
| |
Collapse
|
37
|
Guo J, Fu K, Pei J, Qiu Z, Sun J, Yin K, Luo S. Macro-constructing zeolitic imidazole frameworks functionalized sponge for enhanced removal of heavy metals: The significance of morphology and structure modulation. J Colloid Interface Sci 2023; 630:666-675. [DOI: 10.1016/j.jcis.2022.10.019] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/01/2022] [Revised: 09/06/2022] [Accepted: 10/04/2022] [Indexed: 11/05/2022]
|
38
|
Yang Y, Wang Y, Li X, Xue C, Dang Z, Zhang L, Yi X. Effects of synthesis temperature on ε-MnO 2 microstructures and performance: Selective adsorption of heavy metals and the mechanism onto (100) facet compared with (001). ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2022; 315:120218. [PMID: 36152710 DOI: 10.1016/j.envpol.2022.120218] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/23/2022] [Revised: 09/15/2022] [Accepted: 09/16/2022] [Indexed: 06/16/2023]
Abstract
The heavy-metal adsorbent ε-MnO2 was produced through a simple, one-step oxidation-reduction reaction at three different synthesis temperatures (25 °C, 50 °C and 75 °C) and their morphology and chemical-physical properties were compared. Of the three materials, MnO2-25 had the largest specific surface area and the highest surface hydroxyl concentration. Its optimal performance was demonstrated by batch adsorption experiments with Pb2+, Cd2+ and Cu2+. Of the three metals, Pb2+ was adsorbed best (339.15 mg/g), followed by Cd2+ (107.50 mg/g) and Cu2+ (86.30 mg/g). When all three metals were present, Pb2+ was still absorbed best but now more Cu2+ was adsorbed than Cd2+. In order to explore the mechanism for the inconsistent adsorption order of Cd2+ and Cu2+ in single and competitive adsorption, we combined experimental data with density functional theory (DFT) calculations to elucidate the distinct adsorption nature of MnO2-25 towards these three metals. This revealed that the adsorption affinity of the (100) facet was superior to (001), and since the surface complexes were also more stable on (100), this facet was most likely determining the adsorption order for the single metals. When the metals were present in combination, Pb2+ preferentially occupied the active adsorption sites of (100), forcing Cu2+ to be adsorbed on the (001) facet where Cd2+ was only poorly bound. Thus, the adsorption behavior was affected by MnO2-25 surface chemistry at a molecular scale. This study provides an in-depth understanding of the adsorption mechanisms of the heavy metals on this adsorbent and offers theoretical guidance for production of adsorbent with improved removal efficiency.
Collapse
Affiliation(s)
- Yuebei Yang
- School of Environment and Energy, South China University of Technology, Guangzhou, 510006, PR China
| | - Yaozhong Wang
- School of Environment and Energy, South China University of Technology, Guangzhou, 510006, PR China
| | - Xiaofei Li
- School of Environment and Energy, South China University of Technology, Guangzhou, 510006, PR China
| | - Chao Xue
- School of Environment and Energy, South China University of Technology, Guangzhou, 510006, PR China
| | - Zhi Dang
- School of Environment and Energy, South China University of Technology, Guangzhou, 510006, PR China; The Key Lab of Pollution Control and Ecosystem Restoration in Industry Clusters, Ministry of Education, South China University of Technology, Guangzhou, 510006, PR China
| | - Lijuan Zhang
- School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, 510006, PR China
| | - Xiaoyun Yi
- School of Environment and Energy, South China University of Technology, Guangzhou, 510006, PR China; The Key Lab of Pollution Control and Ecosystem Restoration in Industry Clusters, Ministry of Education, South China University of Technology, Guangzhou, 510006, PR China.
| |
Collapse
|
39
|
Luo Y, Hu Z, Lei X, Wang Y, Guo X. Fluorescent magnetic chitosan-based hydrogel incorporating Amino-Functionalized Fe3O4 and cellulose nanofibers modified with carbon dots for adsorption and detection of Cr (VI). Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.130673] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/03/2022]
|
40
|
Enhanced selective electrosorption of Pb2+ from complex water on covalent organic framework-reduced graphene oxide nanocomposite. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.122147] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
41
|
Cost-efficient collagen fibrous aerogel cross-linked by Fe (III) /silver nanoparticle complexes for simultaneously degrading antibiotics, eliminating antibiotic-resistant bacteria, and adsorbing heavy metal ions from wastewater. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.122209] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
42
|
Wei Y, Chen T, Qiu Z, Liu H, Xia Y, Wang Z, Zou R, Liu C. Enhanced lead and copper removal in wastewater by adsorption onto magnesium oxide homogeneously embedded hierarchical porous biochar. BIORESOURCE TECHNOLOGY 2022; 365:128146. [PMID: 36261111 DOI: 10.1016/j.biortech.2022.128146] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/16/2022] [Revised: 10/07/2022] [Accepted: 10/12/2022] [Indexed: 06/16/2023]
Abstract
Removing non-biodegradable Pb2+ and Cu2+ is the top priority in wastewater purification, while adsorption is a green technology to remove them. Herein, MgO-embedded granular hierarchical porous biochar (HP-MgO@BC) was fabricated by pyrolysis of porous Mg-infused chitosan beads. MgO nanoparticles were homogeneously embedded throughout the hierarchical porous biochar matrix in a high-density and accessible manner, thus providing a large number of easily accessible adsorption sites. Pb2+ and Cu2+ sorption capacities on HP-MgO@BC are 1044.8 and 811.2 mg/g at pH 5, respectively. It could effectively remove Pb2+ and Cu2+ across a broad pH range of 2-7, and show excellent adsorption efficiency in the presence of interfering cations. It also possessed excellent reusability. In the fixed-bed operation, 7880 BV (78.80 L) and 1610 BV (16.10 L) of synthetic Pb2+ and Cu2+ wastewater could be purified by HP-MgO@BC packed column, respectively. The adsorption mechanism involves mineral precipitation, ion exchange, and surface coordination.
Collapse
Affiliation(s)
- Yuanfeng Wei
- Ministry of Forestry Bioethanol Research Center, School of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004, PR China
| | - Tao Chen
- State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082, PR China
| | - Zhiyuan Qiu
- State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082, PR China
| | - Huiling Liu
- School of Science, Hunan University of Technology and Business, Changsha 410205, PR China
| | - Yufen Xia
- State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082, PR China
| | - Zhimin Wang
- State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082, PR China
| | - Ruiying Zou
- Ministry of Forestry Bioethanol Research Center, School of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004, PR China
| | - Chengbin Liu
- State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082, PR China.
| |
Collapse
|
43
|
Adjuik TA, Nokes SE, Montross MD, Wendroth O. The Impacts of Bio-Based and Synthetic Hydrogels on Soil Hydraulic Properties: A Review. Polymers (Basel) 2022; 14:polym14214721. [PMID: 36365717 PMCID: PMC9656743 DOI: 10.3390/polym14214721] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/22/2022] [Revised: 10/30/2022] [Accepted: 11/02/2022] [Indexed: 11/06/2022] Open
Abstract
Soil hydraulic properties are important for the movement and distribution of water in agricultural soils. The ability of plants to easily extract water from soil can be limited by the texture and structure of the soil, and types of soil amendments applied to the soil. Superabsorbent polymers (hydrogels) have been researched as potential soil amendments that could help improve soil hydraulic properties and make water more available to crops, especially in their critical growing stages. However, a lack of a comprehensive literature review on the impacts of hydrogels on soil hydraulic properties makes it difficult to recommend specific types of hydrogels that positively impact soil hydraulic properties. In addition, findings from previous research suggest contrasting effects of hydrogels on soil hydraulic properties. This review surveys the published literature from 2000 to 2020 and: (i) synthesizes the impacts of bio-based and synthetic hydrogels on soil hydraulic properties (i.e., water retention, soil hydraulic conductivity, soil water infiltration, and evaporation); (ii) critically discusses the link between the source of the bio-based and synthetic hydrogels and their impacts as soil amendments; and (iii) identifies potential research directions. Both synthetic and bio-based hydrogels increased water retention in soil compared to unamended soil with decreasing soil water pressure head. The application of bio-based and synthetic hydrogels both decreased saturated hydraulic conductivity, reduced infiltration, and decreased soil evaporation. Hybrid hydrogels (i.e., a blend of bio-based and synthetic backbone materials) may be needed to prolong the benefit of repeated water absorption in soil for the duration of the crop growing season.
Collapse
Affiliation(s)
- Toby A. Adjuik
- Department of Biosystems and Agricultural Engineering, University of Kentucky, Lexington, KY 40503, USA
- Correspondence:
| | - Sue E. Nokes
- Department of Biosystems and Agricultural Engineering, University of Kentucky, Lexington, KY 40503, USA
| | - Michael D. Montross
- Department of Biosystems and Agricultural Engineering, University of Kentucky, Lexington, KY 40503, USA
| | - Ole Wendroth
- Department of Plant & Soil Sciences, University of Kentucky, Lexington, KY 40503, USA
| |
Collapse
|
44
|
Jagaba AH, Kutty SRM, Naushad M, Lawal IM, Noor A, Affam AC, Birniwa AH, Abubakar S, Soja UB, Abioye KJ, Bathula C. Removal of nutrients from pulp and paper biorefinery effluent: Operation, kinetic modelling and optimization by response surface methodology. ENVIRONMENTAL RESEARCH 2022; 214:114091. [PMID: 36041538 DOI: 10.1016/j.envres.2022.114091] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/27/2022] [Revised: 07/19/2022] [Accepted: 08/08/2022] [Indexed: 06/15/2023]
Abstract
This study investigated the effectiveness of extended aeration system (EAS) and rice straw activated carbon-extended aeration system (RAC-EAS) in the treatment of pulp and paper biorefinery effluent (PPBE). RAC-EAS focused on the efficient utilization of lignocellulosic biomass waste (rice straw) as a biosorbent in the treatment process. The experiment was designed by response surface methodology (RSM) and conducted using a bioreactor that operated at 1-3 days hydraulic retention times (HRT) with PPBE concentrations at 20, 60 and 100%. The bioreactor was fed with real PPBE having initial ammonia-N and total phosphorus (TP) concentrations that varied between 11.74 and 59.02 mg/L and 31-161 mg/L, respectively. Findings from the optimized approach by RSM indicated 84.51% and 91.71% ammonia-N and 77.62% and 84.64% total phosphorus reduction in concentration for EAS and RAC-EAS, respectively, with high nitrification rate observed in both bioreactors. Kinetic model optimization indicated that modified stover models was the best suited and were statistically significant (R2 ≥ 0.98) in the analysis of substrate removal rates for ammonia-N and total phosphorus. Maximum nutrients elimination was attained at 60% PPBE and 48 h HRT. Therefore, the model can be utilized in the design and optimization of EAS and RAC-EAS systems and consequently in the prediction of bioreactor behavior.
Collapse
Affiliation(s)
- Ahmad Hussaini Jagaba
- Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, Perak Darul Ridzuan, 32610, Malaysia; Department of Civil Engineering, Abubakar Tafawa Balewa University, Bauchi, Nigeria.
| | - Shamsul Rahman Mohamed Kutty
- Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, Perak Darul Ridzuan, 32610, Malaysia
| | - Mu Naushad
- Department of Chemistry, College of Science, King Saud University, P.O. Box 2455, Riyadh, 11451, Saudi Arabia
| | - Ibrahim Mohammed Lawal
- Department of Civil and Environmental Engineering, University of Strathclyde, Glasgow, UK
| | - Azmatullah Noor
- Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, Perak Darul Ridzuan, 32610, Malaysia
| | - Augustine Chioma Affam
- Civil Engineering Department, School of Engineering and Technology, University of Technology Sarawak, Persiaran Brooke, Sibu, Sarawak, 96000, Malaysia; Centre of Research for Innovation and Sustainable Development (CRISD), University of Technology Sarawak, Sibu, Malaysia
| | | | - Sule Abubakar
- Department of Civil Engineering, Abubakar Tafawa Balewa University, Bauchi, Nigeria
| | - Usman Bala Soja
- Department of Civil Engineering, Federal University Dutsin-Ma, Dutsin-Ma P.M.B., Katsina State, 5001, Nigeria
| | - Kunmi Joshua Abioye
- Department of Chemical Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, Perak Darul Ridzuan, 32610, Malaysia
| | - Chinna Bathula
- Division of Electronics and Electrical Engineering, Dongguk University-Seoul, Seoul, 04620, Republic of Korea
| |
Collapse
|
45
|
Highly selective separation of Pb(II) with a novel aminophosphonic acid chelating resin from strong-acidic hexa-solute media. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.121818] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
|
46
|
Feng Z, Feng C, Chen N, Lu W, Wang S. Preparation of composite hydrogel with high mechanical strength and reusability for removal of Cu(II) and Pb(II) from water. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.121894] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/31/2022]
|
47
|
Zhang R, Liu B, Ma J, Zhu R. Preparation and characterization of carboxymethyl cellulose/chitosan/alginic acid hydrogels with adjustable pore structure for adsorption of heavy metal ions. Eur Polym J 2022. [DOI: 10.1016/j.eurpolymj.2022.111577] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
48
|
Qiu Z, Fu K, Yu D, Luo J, Shang J, Luo S, Crittenden JC. Radix Astragali residue-derived porous amino-laced double-network hydrogel for efficient Pb(II) removal: Performance and modeling. JOURNAL OF HAZARDOUS MATERIALS 2022; 438:129418. [PMID: 35780735 DOI: 10.1016/j.jhazmat.2022.129418] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/20/2022] [Revised: 06/03/2022] [Accepted: 06/16/2022] [Indexed: 06/15/2023]
Abstract
Valorizing solid waste for heavy metal adsorption is highly desirable to avoid global natural resources depletion. In this study, we developed a new protocol to valorize Radix Astragali residue (one of the Chinese medicine residues) into a low-cost, chemically robust, and highly permeable (ca. 90%) amino-laced porous double-network hydrogel (NH2-CNFs/PAA) for efficient Pb(II) adsorption. The NH2-CNFs/PAA showed (i) excellent Pb(II) adsorption capacity (i.e., 994.5 mg g-1, ~4.8 mmol g-1), (ii) fast adsorption kinetics (kf = 2.01 ×10-5 m s-1), (iii) broad working pH range (2.0-6.0), and (iv) excellent regeneration capability (~15 cycles). (v) excellent performance in various real water matrices on Pb(II) removal. Moreover, its high selectivity (distribution coefficient Kd ~2.4 ×106 mL g-1) toward Pb(II) was owing to the present of abundant amino groups (-NH2). Furthermore, the fix-bed column test indicated the NH2-CNFs/PAA can effectively remove 114.6 bed volumes (influent concentration ~5000 μg L-1) with an enrichment factor 10.9. The full-scale system modeling (i.e., pore surface diffusion model (PSDM)) has been applied to predict the NH2-CNFs/PAA performance on Pb(II) removal. Overall, we have provided an alternative "win-win" scenario that can resolve the Chinese medicine residues disposal issue by valorizing it into high performance gel-based adsorbents for efficient heavy metal removal.
Collapse
Affiliation(s)
- Zhiyuan Qiu
- State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082, China; School of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Kaixing Fu
- State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082, China; School of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Deyou Yu
- Engineering Research Center for Eco-Dyeing and Finishing of Textiles, Ministry of Education, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - Jinming Luo
- School of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Jingge Shang
- School of Engineering, China Pharmaceutical University, Nanjing 210009, China
| | - Shenglian Luo
- State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082, China
| | - John C Crittenden
- Brook Byers Institute for Sustainable Systems, School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, GA 30332, United States
| |
Collapse
|
49
|
Shen B, Zhang Q, Zheng C, Huang Y, Zhang G, Fei P, Hu S. Construction of double-network hydrogel based on low methoxy pectin/polyvinyl alcohol and its structure and properties. Int J Biol Macromol 2022; 221:821-830. [PMID: 36089090 DOI: 10.1016/j.ijbiomac.2022.09.022] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/26/2022] [Revised: 08/31/2022] [Accepted: 09/05/2022] [Indexed: 11/29/2022]
Abstract
In this study, an interpenetrating double-network hydrogel (LMP/AA/PVAH) was prepared based on low methoxy pectin (LMP), acrylic acid (AA) and polyvinyl alcohol (PVA). The first rigid network of chemical crosslinking was constructed via free radical polymerization of LMP and AA, and the second of ductile physical crosslinking network was constructed via cyclic freeze-thaw of PVA. The first cycle hardness and elasticity of the LMP/AA/PVAH significantly increased from 13.08 N and 0 to 24.28 N and 0.79, respectively, when the second network structure was constructed in the hydrogel by PVA. Besides, the PVA network might enhance the ductile and limit the swelling of hydrogel. In addition, the adsorption properties of LMP/AA/PVAH were evaluated by adsorption of methylene blue (MB). The adsorption behavior of MB by LMP/AA/PVAH conformed to the pseudo-second-order kinetic model. Besides, after 4 cycles of adsorption, there was no significant difference in adsorption capacity of LMP/AA/PVAH. The results showed that LMP/AA/PVAH had good reusability.
Collapse
Affiliation(s)
- Bihua Shen
- Key Laboratory of Modern Analytical Science and Separation Technology, College of Chemistry, Chemical Engineering and Environment, Minnan Normal University, Zhangzhou 363000, PR China; School of Biological Science and Biotechnology, Minnan Normal University, Zhangzhou 363000, PR China
| | - Qiong Zhang
- School of Biological Science and Biotechnology, Minnan Normal University, Zhangzhou 363000, PR China
| | - Chenmin Zheng
- School of Biological Science and Biotechnology, Minnan Normal University, Zhangzhou 363000, PR China
| | - Yufan Huang
- School of Biological Science and Biotechnology, Minnan Normal University, Zhangzhou 363000, PR China
| | - Guoguang Zhang
- Key Laboratory of Modern Analytical Science and Separation Technology, College of Chemistry, Chemical Engineering and Environment, Minnan Normal University, Zhangzhou 363000, PR China; School of Biological Science and Biotechnology, Minnan Normal University, Zhangzhou 363000, PR China
| | - Peng Fei
- Key Laboratory of Modern Analytical Science and Separation Technology, College of Chemistry, Chemical Engineering and Environment, Minnan Normal University, Zhangzhou 363000, PR China; School of Biological Science and Biotechnology, Minnan Normal University, Zhangzhou 363000, PR China.
| | - Shirong Hu
- Key Laboratory of Modern Analytical Science and Separation Technology, College of Chemistry, Chemical Engineering and Environment, Minnan Normal University, Zhangzhou 363000, PR China; School of Biological Science and Biotechnology, Minnan Normal University, Zhangzhou 363000, PR China.
| |
Collapse
|
50
|
Chen J, Peng Q, Peng X, Zhang H, Zeng H. Probing and Manipulating Noncovalent Interactions in Functional Polymeric Systems. Chem Rev 2022; 122:14594-14678. [PMID: 36054924 DOI: 10.1021/acs.chemrev.2c00215] [Citation(s) in RCA: 45] [Impact Index Per Article: 22.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
Abstract
Noncovalent interactions, which usually feature tunable strength, reversibility, and environmental adaptability, have been recognized as driving forces in a variety of biological and chemical processes, contributing to the recognition between molecules, the formation of molecule clusters, and the establishment of complex structures of macromolecules. The marriage of noncovalent interactions and conventional covalent polymers offers the systems novel mechanical, physicochemical, and biological properties, which are highly dependent on the binding mechanisms of the noncovalent interactions that can be illuminated via quantification. This review systematically discusses the nanomechanical characterization of typical noncovalent interactions in polymeric systems, mainly through direct force measurements at microscopic, nanoscopic, and molecular levels, which provide quantitative information (e.g., ranges, strengths, and dynamics) on the binding behaviors. The fundamental understandings of intermolecular and interfacial interactions are then correlated to the macroscopic performances of a series of noncovalently bonded polymers, whose functions (e.g., stimuli-responsiveness, self-healing capacity, universal adhesiveness) can be customized through the manipulation of the noncovalent interactions, providing insights into the rational design of advanced materials with applications in biomedical, energy, environmental, and other engineering fields.
Collapse
Affiliation(s)
- Jingsi Chen
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Qiongyao Peng
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Xuwen Peng
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Hao Zhang
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Hongbo Zeng
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| |
Collapse
|