Impact of brine and antiscalants on reef-building corals in the Gulf of Aqaba - Potential effects from desalination plants

Integrative transcriptomic analysis reveals a broad range of toxic effects of triclosan on coral Porites lutea

Triclosan (TCS) is an antimicrobial agent commonly used in personal care products. However, little is known about its toxicity to corals. Here, we examined the acute toxic effects (96 h) of TCS at different levels to the coral Porites lutea. Results showed that the bioaccumulation factors (BAFs) of TCS in Porites lutea decreased with increasing TCS exposure levels. Exposure to TCS at the level up to 100 μg/L did not induce bleaching of Porites lutea. However, by the end of the experiment, both the density and chlorophyll a content of the symbiotic zooxanthellae were 19-52 % and 19.9-45.6 % lower in the TCS treatment groups than in the control, respectively. For the coral host, its total antioxidant capacity (T-AOC), superoxide dismutase (SOD) and catalase (CAT) activities were all significantly lower in the TCS treatment groups than the control. Transcriptome analysis showed that 942 and 1077 differentially expressed genes (DEGs) were identified in the coral host in the 0.5 and 100 μg/L TCS treatment groups, respectively. Meanwhile, TCS can interfere with pathways related to immune system and reproductive system in coral host. Overall, our results suggest that environmentally relevant concentrations of TCS can impact both the coral host and the symbiotic zooxanthellae.

Importance of iron complexation and floc formation towards phosphonate removal with Fe-electrocoagulation

Phosphonates are widely used scale inhibitors, but the residual phosphonates in drainage are challenging to remove because of their chelating capacity and resistance to biodegradation. Here, we reported a highly efficient and robust Fe-electrocoagulation (Fe-EC) system for phosphonate removal. Surprisingly, we found for the first time that phosphonates like NTMP were more efficiently removed under anoxic conditions (80% of total soluble phosphorus (TSP) in 4 min) than oxic conditions (0% of TSP within 6 min) in NaCl solution. A similar phenomenon was observed when other phosphonates, such as EDTMP and DTPMP, were removed, highlighting the importance of iron complexation and floc formation toward phosphonate removal with Fe-EC. We also showed that the removal efficiency of NTMP by electrochemically in-situ formed flocs (97%) was much higher than post-adsorption systems (ex-situ, 40%), revealing that the growth of flocs consumed the active site for NTMP adsorption. Beyond the removal of TSP, 10 % of NTMP-P was also degraded after the electrolysis phase, evidenced by the evolution of phosphate-P. However, this did not happen in anoxic or chemical coagulation processes, which confirms the formation of reactive oxygen species via Fe(II) oxidation in the oxic Fe-EC system. The primary removal mechanism of phosphonates is due to their complexation with iron (hydr)oxide generated in the Fe-EC system by forming a Fe-O-P bond. Encouragingly, the Fe-EC system exhibits comparable or even better performance in treating phosphonate-laden wastewater (i.e., cooling water). Our preliminary cost calculation suggests the proposed system (€ 0.009/m3) has a much lower OPEX under oxic conditions than existing approaches. This study sheds light on the removal mechanism of phosphonate and the treatment of phosphonate-laden wastewater by playing with the iron complexion and flocs formation in classical Fe-EC systems.

Non-target screening and prioritization of organic contaminants in seawater desalination and their ecological risk assessment

The impact of desalination brine on the marine environment is a global concern. Regarding this, salinity is generally accepted as the major environmental factor in desalination concentrate. However, recent studies have shown that the influence of organic contaminants in brine cannot be ignored. Therefore, a non-targeted screening method based on comprehensive two-dimensional gas chromatography-quadrupole mass spectrometry (GC × GC-qMS) was developed for identifying organic contaminants in the desalination brine. A total of 404 compounds were tentatively identified from four seawater desalination plants (three reverse osmosis plants and one multiple effect distillation plant) in China. The identified compounds were prioritized based on their persistence, bioaccumulation, ecotoxicity, usage, and detection frequency. Twenty-one (21) compounds (seven phthalates, ten pesticides, four trihalomethanes) were then selected for further quantitative analysis and ecological risk assessment, including compounds from the priority list along with substances from the same chemical classes. Ecologically risky substances in brine include diisobutylphthalate and bis(2-Ethylhexyl) phthalate, atrazine and acetochlor, and bromoform. Most of the contaminants come from raw seawater, and no high risk contaminants introduced by the desalination process have been found except for disinfection by-products. In brine discharge management, people believed that all pollution in raw seawater was concentrated by desalination process. This study shows that not all pollutants are concentrated during the desalination process. In this study, the total concentration of pesticide in the brine increased by 58.42%. The concentration of ∑PAEs decreased by 13.65% in reverse osmosis desalination plants and increased by 10.96% in the multi-effect distillation plant. The concentration of trihalomethane increased significantly in the desalination concentrate. The change in the concentration of pollutants in the desalination concentrate was related to the pretreatment method and the chemical characteristics of the contaminants. The method and results given in this study hinted a new idea to identify and control the environmental impact factors of brine.

Impacts of Desalination Brine Discharge on Benthic Ecosystems

Seawater reverse osmosis (SWRO) desalination facilities produce freshwater and, at the same time, discharge hypersaline brine that often includes various chemical additives such as antiscalants and coagulants. This dense brine can sink to the sea bottom and creep over the seabed, reaching up to 5 km from the discharge point. Previous reviews have discussed the effects of SWRO desalination brine on various marine ecosystems, yet little attention has been paid to the impacts on benthic habitats. This review comprehensibly discusses the effects of SWRO brine discharge on marine benthic fauna and flora. We review previous studies that indicated a suite of impacts by SWRO brine on benthic organisms, including bacteria, seagrasses, polychaetes, and corals. The effects within the discharge mixing zones range from impaired activities and morphological deformations to changes in the community composition. Recent modeling work demonstrated that brine could spread over the seabed, beyond the mixing zone, for up to several tens of kilometers and impair nutrient fluxes from the sediment to the water column. We also provide a possible perspective on brine's impact on the biogeochemical process within the mixing zone subsurface. Desalination brine can infiltrate into the sandy bottom around the discharge area due to gravity currents. Accumulation of brine and associated chemical additives, such as polyphosphonate-based antiscalants and ferric-based coagulants in the porewater, may change the redox zones and, hence, impact biogeochemical processes in sediments. With the demand for drinking water escalating worldwide, the volumes of brine discharge are predicted to triple during the current century. Future efforts should focus on the development and operation of viable technologies to minimize the volumes of brine discharged into marine environments, along with a change to environmentally friendly additives. However, the application of these technologies should be partly subsidized by governmental stakeholders to safeguard coastal ecosystems around desalination facilities.

Salinity impacts on humidification dehumidification (HDH) desalination systems: review

The use of humidification-dehumidification water desalination technology has been shown to be a practical means of meeting the demand for freshwater. The aim of this review is to investigate the impact of salinity on HDH techniques that have various benefits in terms of both economics and the environment, including the capacity to operate at low temperatures, utilize sustainable energy sources, the need for low maintenance, and straightforward construction requirements. Also, in this review, it is observed that the HDH system's components are strong and capable of treating severely salinized water. It can treat water in an appropriate way than other desalination technologies. This technology has recently been commercialized to treat highly salinized generated water. However, more research is needed to determine how salinity affects HDH productivity. According to several research investigations, while the specific thermal energy consumption increased considerably and the productivity of water per unit of time decreased significantly as the salt mass percentage grew, the purity of clean water did not suffer. The rejected brine must be reduced by increasing the total water recovery ratio in the HDH system. Through this review, it was found that brine control is becoming increasingly important in the water processing industry. ZLD systems, which aim to recover both freshwater and solid salts, can be a viable replacement for disposal methods. Finally, through this reviewer, it was concluded that HDH desalination systems may operate with extremely saline water while increasing salinity has a significant influence on system performance.

Imparting scalephobicity with rational microtexturing of soft materials

Crystallization fouling, a process where scale forms on surfaces, is widespread in nature and technology, negatively affecting energy and water industries. Despite the effort, rationally designed surfaces that are intrinsically resistant to it remain elusive, due in part to a lack of understanding of how microfoulants deposit and adhere in dynamic aqueous environments. Here, we show that rational tuning of coating compliance and wettability works synergistically with microtexture to enhance microfoulant repellency, characterized by low adhesion and high removal efficiency of numerous individual microparticles and tenacious crystallites in a flowing water environment. We study the microfoulant interfacial dynamics in situ using a micro-scanning fluid dynamic gauge system, elucidate the removal mechanisms, and rationalize the behavior with a shear adhesive moment model. We then demonstrate a rationally developed coating that can remove 98% of deposits under shear flow conditions, 66% better than rigid substrates.

Bacterial Microbiota of Ostreobium, the Coral-Isolated Chlorophyte Ectosymbiont, at Contrasted Salinities

Microscopic filaments of the siphonous green algae Ostreobium (Ulvophyceae, Bryopsidales) colonize and dissolve the calcium carbonate skeletons of coral colonies in reefs of contrasted salinities. Here, we analyzed their bacterial community's composition and plasticity in response to salinity. Multiple cultures of Pocillopora coral-isolated Ostreobium strains from two distinct rbcL lineages representative of IndoPacific environmental phylotypes were pre-acclimatized (>9 months) to three ecologically relevant reef salinities: 32.9, 35.1, and 40.2 psu. Bacterial phylotypes were visualized for the first time at filament scale by CARD-FISH in algal tissue sections, within siphons, at their surface or in their mucilage. Ostreobium-associated microbiota, characterized by bacterial 16S rDNA metabarcoding of cultured thalli and their corresponding supernatants, were structured by host genotype (Ostreobium strain lineage), with dominant Kiloniellaceae or Rhodospirillaceae (Alphaproteobacteria, Rhodospirillales) depending on Ostreobium lineage, and shifted Rhizobiales' abundances in response to the salinity increase. A small core microbiota composed of seven ASVs (~1.5% of thalli ASVs, 19-36% cumulated proportions) was persistent across three salinities in both genotypes, with putative intracellular Amoebophilaceae and Rickettsiales_AB1, as well as Hyphomonadaceae and Rhodospirillaceae also detected within environmental (Ostreobium-colonized) Pocillopora coral skeletons. This novel knowledge on the taxonomic diversity of Ostreobium bacteria paves the way to functional interaction studies within the coral holobiont.

Effect of thermal characteristics on the chemical quality of real-brine treatment through hydrophilic fiber-based low-grade heat-powered humidification-dehumidification process

Considering the increasing demand for desalination plants and their byproduct brine, this study investigated a humidification-dehumidification (HDH) system for treating membrane distillation-generated real high-salinity brine using low-grade heat (45-70 ℃) to explore its feasibility for sustainable energy-efficient minimal liquid discharge. A novel super-hydrophilic fabric was adopted for accelerated humidification, and its impact on brine droplet miscarriage characteristics was evaluated. The influence of the operating fluid thermal properties (cycle 1: air preheating; cycle 2: air and brine dual-fluid preheating; and cycle 3: air post-heating after humidification) on the brine treatment efficiency, energy consumption, and chemical quality of freshwater produced was analyzed in detail to establish their characteristic nexus. It was identified that, during humidification, increasing the brine temperature (up to 55 ℃) influenced its ionic mobility, thereby promoting efficient separation of the salts/minerals and contributing to achieving better freshwater quality. Furthermore, although cycle 3 exhibited improved system thermal efficiency (gained output ratio equal to 1.77), its non-preheated air contributed to a negative effect of the reduced humidity ratio (∼17 g/kg), leading to a lower freshwater productivity of 67% than that of cycle 2 (29 g/kg and 70%). The present study also illustrates a novel effect of evaporative deposition occurring due to air-water interaction on the fabric humidifier surface, with an exploration of its effect on reducing freshwater chemical quality. The freshwater generated from optimum thermal cycle 2 exhibited reduced pH (by ∼63%), sodium (99.9%), chloride (99.9%), toxic boron (99.7%), and other chemical contaminants, thereby satisfying the major international water reuse standards.

Impacts of desalination discharges on phytoplankton and zooplankton: Perspectives on current knowledge

Large-scale application of desalination technology can result in impacts to the marine biota, such as phytoplankton and zooplankton, basal components of marine trophic webs. In this context, our perspective aimed to summarize the impacts of effluent discharges from desalination plants on phytoplankton and zooplankton in order to identify the main gaps and challenges in this theme, propose solutions, and provide recommendations for future work. We identified two main approaches to assess the desalination impacts: laboratory experiments and field studies. Most of these studies were conducted in areas impacted by effluent discharges using the BACI (before, after, and control-impact) approach. They primarily aimed to set out the impacts of hypersaline brine on the surrounding environment and, to a lesser extent, the high-temperature effluents and contaminants from desalination plants. Moreover, phytoplankton was more sensitive to effluent discharges than zooplankton. The main changes observed were a decrease in primary productivity, a loss in diversity, and a change in the community structure of planktonic populations due to the dominance of saline-tolerant groups, which highlights the importance improving treatment or dilution of effluent discharges to minimize the impacts over whole neritic trophic webs, which depend on phytoplankton. From the impacts related to effluent discharges analyzed herein, RO technology was related to most cases of negative impact related to salinity modifications. However, coagulants were related to negative effects in all study cases. Future work should focus on escalate the impacts of such effluents on other trophic levels that could be directly or indirectly impacted as well as on how to improve the quality of effluent discharges. Also, we highlight the importance of further baseline and long-term monitoring studies to investigate desalination-induced changes and community resilience to these impacts, as well as studies to provide alternatives to the use of toxic chemicals in the pre-treatment phases.

Electrodialysis with Bipolar Membranes for the Sustainable Production of Chemicals from Seawater Brines at Pilot Plant Scale

Environmental concerns regarding the disposal of seawater reverse osmosis brines require the development of new valorization strategies. Electrodialysis with bipolar membrane (EDBM) technology enables the production of acid and base from a salty waste stream. In this study, an EDBM pilot plant with a membrane area of 19.2 m² was tested. This total membrane area results much larger (i.e., more than 16 times larger) than those reported in the literature so far for the production of HCl and NaOH aqueous solutions, starting from NaCl brines. The pilot unit was tested both in continuous and discontinuous operation modes, at different current densities (200-500 A m^-2). Particularly, three different process configurations were evaluated, namely, closed-loop, feed and bleed, and fed-batch. At lower applied current density (200 A m^-2), the closed-loop had a lower specific energy consumption (SEC) (1.4 kWh kg^-1) and a higher current efficiency (CE) (80%). When the current density was increased (300-500 A m^-2), the feed and bleed mode was more appropriate due to its low values of SEC (1.9-2.6 kWh kg^-1) as well as high values of specific production (SP) (0.82-1.3 ton year^-1 m^-2) and current efficiency (63-67%). These results showed the effect of various process configurations on the performance of the EDBM, thereby guiding the selection of the most suitable process configuration when varying the operating conditions and representing a first important step toward the implementation of this technology at industrial scale.

The Potential of Membrane Contactors in the Pre-Treatment and Post-Treatment Lines of a Reverse Osmosis Desalination Plant

The flexibility of membrane contactors (MCs) is highlighted for a reverse osmosis (RO) desalination plant. MCs are applied as pre-treatment for the oxygen removal and the pH reduction of seawater, also as post-treatment for the pH increase of the RO permeate and the reduction of the RO brine volume. A decrease of the seawater pH down to neutral values, as needed when coagulation is used in the pre-treatment line of RO, together with an increase of the RO permeate pH up to 7.58, matching the target of produced water, can be obtained without the use of chemicals. Direct Contact Membrane Distillation (DCMD) and Vacuum Membrane Distillation (VMD) are investigated as function of the feed concentration (ranging from 40 g/L to 80 g/L) and temperature (40 °C–80° C). Their performance is compared at parity of operating conditions and in terms of applied driving force. Both distillation systems are able to efficiently reject salts (rejection > 99.99%), while higher distillate fluxes are obtained when a vacuum is applied at the permeate side (15 kg/m2h vs. 6.6 kg/m2h for the 80 g/L feed).

Antiscalants used in the desalination industry impact the physiology of the coral Montipora capricornis

Many coral reefs are found in arid and semi-arid regions that often face severe water scarcity and depend on seawater desalination for freshwater supply. Alongside freshwater production, desalination plants discharge brine waste into the sea. Brine includes various chemicals (e.g., antiscalants) that may harm the coastal environment. Although widely used, little is known about the ecotoxicological effects of antiscalants (AS) on hard corals. This study compared the impacts of polyphosphonate-based and polymer-based ASs on the coral Montipora capricornis. After two weeks of exposure, we determined the effects of AS on coral physiology, symbiotic microalgae, and associated bacteria, using various analytical approaches such as optical coherence tomography, pulse amplitude modulated fluorometry, and oxidative stress biomarkers. Both ASs reduced polyp activity (∼25%) and caused tissue damage (30% and 41% for polymer and polyphosphonate based AS, respectively). In addition, exposure to polyphosphonate-based AS decreased the abundance of endosymbiotic algae (39%) and upregulated the antioxidant capacity of the animal host (45%). The microalgal symbionts were under oxidative stress, with increased levels of antioxidant capacity and oxidative damage (a 2-fold increase compared to the control). Interestingly, exposure to AS enhanced the numbers of associated bacteria (∼40% compared to the control seawater) regardless of the AS type. Our results introduce new insights into the effects of brine on the physiology of hard corals, highlighting that choosing AS type must be examined according to the receiving ecosystem.

Burt J. Long-term, basin-scale salinity impacts from desalination in the Arabian/Persian Gulf

The nations on the shoreline of the Arabian/Persian Gulf are the world's largest users of desalination technologies, which are essential to meet their freshwater needs. Desalinated freshwater production is projected to rapidly increase in future decades. Thus, concerns have been raised that desalination activities may result in non-negligible long-term, basin-wide increases of salinity, which would have widespread detrimental effects on the Gulf marine ecosystems, with ripple effects on fisheries, as well as impacting the desalination activities themselves. We find that current yearly desalinated freshwater production amounts to about 2% of the net yearly evaporation from the Gulf. Projections to 2050 bring this value to 8%, leading to the possibility that, later in the second half of the century, desalinated freshwater production may exceed 10% of net evaporation, an amount which is comparable to interannual fluctuations in net evaporation. With the help of a model we examine several climatological scenarios, and we find that, under IPCC's SSP5-8.5 worst-case scenarios, end-of-century increases in air temperature may result in salinity increases comparable or larger to those produced by desalination activities. The same scenario suggests a reduced evaporation and an increased precipitation, which would have a mitigating effect. Finally we find that, owing to a strong overturning circulation, high-salinity waters are quickly flushed through the Strait of Hormuz. Thus, even in the worst-case scenarios, basin-scale salinity increases are unlikely to exceed 1 psu, and, under less extreme hypothesis, will likely remain well below 0.5 psu, levels that have negligible environmental implications at the basin-wide scale.

Discharge of Polyphosphonate-Based Antiscalants via Desalination Brine: Impact on Seabed Nutrient Flux and Microbial Activity

Desalination brine is a hypersaline byproduct that contains various operational chemicals such as polyphosphonate-based antiscalants. Brine often sinks and flows over the seabed by density currents; therefore, it may affect sediment-water nutrient fluxes and thus microbial activity. We quantified these parameters in brine plumes around two large-scale desalination facilities located in the P-limited Southeastern Mediterranean Sea. The benthic nutrient fluxes and microbial activity were determined using ex-situ core benthocosms, to which we added brine from the dispersion area in excess salinities of ∼3% and 5% above natural levels. A higher influx of dissolved organic phosphorus (∼6-fold) and an efflux of dissolved organic carbon (∼1.7-fold) were measured in the brine-amended cores relative to the controls. This was accompanied by increased oxygen consumption (15%) and increased microbial activity (∼1.5-6.5-fold). Field observations support the results from experimental manipulations, yielding ∼4.5-fold higher microbial activity rates around the brine plume compared to uninfluenced locations. Our results imply that desalination brine can alter sedimentary processes affecting benthic nutrients inventories. Moreover, we show that brine acts as a vector of anthropogenic P, stimulating microbial activity in the sediment-water interface.

Antiscalants Used in Seawater Desalination: Biodegradability and Effects on Microbial Diversity

Antiscalants are organic polymers widely used for scale inhibition in seawater desalination. While they are susceptible to biodegradation, they provide nutrients for bacterial cell growth and energy for the microbes that assimilate and degrade them. This paper shows the biodegradability of three commercial antiscalants (polyacrylate—CA, polyphosphonate—PP, and carboxylated dendrimers—DN) applied in seawater reverse osmosis desalination (SWRO) as well as analyzing the antiscalant’s effects on microbial diversity using microbial cultures grown in seawater, under semi-continuous batch conditions. Nutritional uptake and contribution of the antiscalants to microbial growth were investigated by measuring DOC, TDN, NO₃⁻, NO₂⁻, PO₄⁻, NH₄⁺, and TP of the filtered samples of the incubated batch, twice a month, for twelve months. The microbial community was estimated by 16S rRNA sequencing. The main changes in the microbial communities were determined by the incubation period. However, bacterial orders of the antiscalant treatments differed significantly from the control treatment, namely Planctomycetales, Clostridiales, Sphingobacteriales, Rhodobacterales, and Flavobacteriales, and other unclassified bacterial orders, which were found in various relative abundances dependent on incubation times. The results showed the PP antiscalant to be the least biodegradable and to have the least effect on the bacterial community composition compared to the control. This result emphasizes the need to reassess the suitability criteria of antiscalants, and to further monitor their long-term environmental effects.

The impact assessment of desalination plant discharges on heavy metal pollution in the coastal sediments of the Persian Gulf

In recent decades the development of desalination plants (DPs) for desalination of seawater has increased dramatically, while little attention has been paid to the effects of this activity on the accumulation of heavy metals (HMs) in the sediments of affected ecosystems. The present study was implemented to evaluate (1) heavy metal accumulation in sediments impacted by DPs discharges, (2) spatial and temporal changes of HMs and the contamination degree by different types of pollution indexes (single and integrated indices), and (3) ecological risk assessment of cadmium (Cd), lead (Pb), zinc (Zn) and copper (Cu) in sediments affected by DPs discharges. A total of 288 sediment samples were collected seasonally at 24 stations from November 2019 to October 2020. Analysis of HMs concentrations in sediments near the desalination plant discharge provided evidence of local contamination. Maximum concentration of Cu and Pb elements were found in sediments near the desalination plant discharge point. Hierarchical cluster analysis revealed clear segregation of stations impacted by desalination plant discharges and away from discharges. The values of PLI index in sediments of all sampling stations were < 1, indicating that there was no metal pollution by this index. The potential ecological risk index (PERI) ranged from 5.33 ± 0.51 to 11.81 ± 4.98 in sampling sediments and were classified as "low potential ecological risk". These results demonstrate that the DPs discharge increased HMs concentrations in the sediments in close proximity to outlets. The necessary and practical regulations and policies regarding the rejection of the DPs discharge and disposal of chemical compounds must be implemented and enforced.

Stylophora under stress: A review of research trends and impacts of stressors on a model coral species

Sometimes called the "lab rat" of coral research, Stylophora pistillata (Esper, 1797) has been extensively used in coral biology in studies ranging from reef ecology to coral metabolic processes, and has been used as a model for investigations into molecular and cellular biology. Previously thought to be a common species spanning a wide distribution through the Indo-Pacific region, "S. pistillata" is in fact four genetically distinct lineages (clades) with different evolutionary histories and geographical distributions. Here, we review the studies of stress responses of S. pistillatasensulato (clades 1-4) and highlight research trends and knowledge gaps. We identify 126 studies on stress responses including effects of temperature, acidification, eutrophication, pollutants and other local impacts. We find that most studies have focused on the effect of single stressors, especially increased temperature, and have neglected the combined effects of multiple stressors. Roughly 61% of studies on S. pistillata come from the northern Red Sea (clade 4), at the extreme limit of its current distribution; clades 2 and 3 are virtually unstudied. The overwhelming majority of studies were conducted in laboratory or mesocosm conditions, with field experiments constituting only 2% of studies. We also note that a variety of experimental designs and treatment conditions makes it difficult to draw general conclusions about the effects of particular stressors on S. pistillata. Given those knowledge gaps and limitations in the published research, we suggest a more standardized approach to compare responses across geographically disparate populations and more accurately anticipate responses to predicted future climate conditions.

Spatial extent of desalination discharge impacts to habitat-forming species on temperate reefs

Outlet infrastructure and hypersaline discharge from large-scale desalination operations have the potential to impact marine environments. Here, we present the results of a six-year M-BACI assessment of the impacts of desalination discharge outlet construction and hypersaline effluent on the cover of habitat-forming species on temperate reefs. The construction of the desalination outlet caused a decrease in the cover of Ecklonia radiata (kelp) and an increase in the cover of algal turfs up to 55 m from the outlet. Following the commencement of discharging of hypersaline brine, the impact to E. radiata and algal turfs persisted, but decreased in spatial extent to be less than 25 m from the outlet. Hypersaline discharge was also associated with a significant decline in the cover of sponges in outlet compared to reference sites. Overall, our results demonstrate that the water security benefits from large-scale desalination may sometimes be appropriately balanced against the associated ecological consequences.

Membrane Distillation for Wastewater Treatment: A Mini Review

Water serves as an indispensable part of human life and production. On account of the overexploitation of traditional water sources, the demand for wastewater recycling is expanding rapidly. As a promising water treatment process, membrane distillation (MD) has been utilized in various wastewater treatments, such as desalination brine, textile wastewater, radioactive wastewater, and oily wastewater. This review summarized the investigation work applying MD in wastewater treatment, and the performance was comprehensively introduced. Moreover, the obstructions of industrialization, such as membrane fouling, membrane wetting, and high energy consumption, were discussed with the practical investigation. To cope with these problems, various strategies have been adopted to enhance MD performance, including coupling membrane processes and developing membranes with specific surface characteristics. In addition, the significance of nutrient recovery and waste heat utilization was indicated.

A novel zero-liquid discharge desalination system based on the humidification-dehumidification process: A preliminary study

As a byproduct of desalination plants, brine is increasingly becoming a threat to the environment, and the design of zero-liquid discharge (ZLD) systems is gaining increasing attention. Existing ZLD systems are limited by a high energy intensity and high plant costs of their crystallizers. This study proposes a novel crystallization method based on the humidification-dehumidification (HDH) process, which exhibits the advantages of a low energy consumption, low component costs and a reduced scaling and fouling potential. A simple experimental setup is first designed to demonstrate the feasibility of the proposed system. Brine concentration and salt crystallization are successfully achieved with air heated to 40 °C as the heat source. Afterwards, a thermo-economic analysis is conducted for the whole system. The specific thermal energy and electricity consumption levels are found to range from 700-900 and 5-11 kJ, respectively, per kg of feed brine. The energy consumption is 56% lower than that of a conventional evaporative crystallizer, and the initial plant cost is reduced by 58%.

Is the development of desalination compatible with sustainable development of the Arabian Gulf?

The development of desalination has been essential to the rapid economic development of the countries bordering the Arabian Gulf. The current production capacity of sea water desalination plants drawing water from Gulf is over 20 million m³ day^-1, which may rise to 80 million m³ day^-1 by 2050. Whilst supporting aspects of sustainable development related to water and sanitation, desalination impacts the marine environment through impingement and entrainment of organisms in intakes, and through thermal, brine and chemical discharges. This may compromise other objectives for sustainable development related to sustainable use of the oceans. Under business as usual scenarios, by 2050, the impact of individual desalination plants will combine causing a regional scale impact. Without mitigating actions to avoid the business as usual scenario, by 2050, desalination in combination with climate change, will elevate coastal water temperatures across more than 50% of the Gulf by at least 3 °C, and a volume of water equivalent to more than a third of the total volume of water between 0 and 10 m deep will pass through desalination plants each year. This will adversely impact the coastal ecosystem of the Gulf, with impacts on biodiversity, fisheries and coastal communities and may cause potential loss of species and habitats from the Gulf. Given the significant implications of these preliminary findings, and in light of the precautionary approach to management, it is recommended that mitigating options addressing behavioural, regulatory and technological change are rapidly evaluated and implemented to avoid the development of desalination in the region along a business as usual pathway, and multidisciplinary research studies should be conducted to reduce uncertainty in predictions of future impacts.

Towards sustainable circular brine reclamation using seawater reverse osmosis, membrane distillation and forward osmosis hybrids: An experimental investigation

Desalination and wastewater treatment technologies require an effective solution for brine management to ensure environmental sustainability, which is closely linked with efficient process operations, reduction of chemical dosages, and valorization of brines. Within the scope of desalination brine reclamation, a circular system consisting of seawater reverse osmosis (SWRO), membrane distillation (MD), and forward osmosis (FO) three-process hybrid is investigated. The proposed design increases water recovery from SWRO brine (by MD) and dilutes concentrated brine to seawater level (by FO) for SWRO feed. It ultimately reduces SWRO process brine disposal and improves crystallization efficiency for a zero-liquid discharge application. The operating range of the hybrid system is indicated by a seawater volumetric concentration factor (VCF) ranging from 1.0 to 2.2, which covers practical and sustainable operation in full-scale applications. Within the proposed VCF range, different operating conditions of the MD and FO processes were evaluated in series with concentrated seawater as well as real SWRO brine from a full-scale desalination plant. Water quality and membrane surface were analyzed before and after experiments to assess the impact of the SWRO brine. Despite their low concentration (0.13 mg/L as phosphorous), antiscalants present in SWRO brine alleviated the flux decline in MD operations by 68.3% compared to operations using seawater concentrate, while no significant influence was observed on the FO process. A full spectrum of water quality analysis of real SWRO brine and Red Sea water is made available for future SWRO brine reclamation studies. The operating conditions and experimental results have shown the potential of the SWRO-MD-FO hybrid system for a circular brine reclamation.

Desalination and environment: A critical analysis of impacts, mitigation strategies, and greener desalination technologies

The desalination of seawater is perceived as one of the most viable processes to fulfill the mounting demand for freshwater. Despite enormous economic, social, and health benefits offered by desalination, there are several concerns regarding its prospective environmental impacts (EIs). The objective of this work is to critically evaluate the potential EIs of seawater desalination, and assess the prospects of greener desalination. The EIs of desalination on marine environment, land, groundwater, and air quality was systematically reviewed. An attempt has been made to analyze the actuality of these so-called impacts with reference to evidence from real desalination plants. The mitigative measures to counterbalance these unfavorable impacts are critically appraised. Furthermore, the brine management technologies for the disposal of reject stream, the recovery of precious materials and water, and the production of useful chemicals are also reviewed. Current challenges to minimize the adverse impacts of desalination and prospects of sustainable greener desalination to overwhelm global water scarcities are also discussed. The current desalination approaches have moderate and minor negative EIs. However, with proper mitigation and utilization of modern technologies, these impacts can be lessened. Furthermore, by employing various modern techniques, reject brine can be utilized for several useful applications while reducing its adverse impacts simultaneously. Recent advancements in desalination technologies have also offered many alternative approaches that provide a roadmap towards greener desalination. This review article will be beneficial for all the stakeholders in the desalination industry.

Marine health of the Arabian Gulf: Drivers of pollution and assessment approaches focusing on desalination activities

The Arabian Gulf is one of the most adversely affected marine environments worldwide, which results from combined pollution drivers including climate change, oil and gas activities, and coastal anthropogenic disturbances. Desalination activities are one of the major marine pollution drivers regionally and internationally. Arabian Gulf countries represent a hotspot of desalination activities as they are responsible for nearly 50% of the global desalination capacity. Building desalination plants, up-taking seawater, and discharging untreated brine back into the sea adversely affects the biodiversity of the marine ecosystems. The present review attempted to reveal the potential negative effects of desalination plants on the Gulf's marine environments. We emphasised different conventional and innovative assessment tools used to assess the health of marine environments and evaluate the damage exerted by desalination activity in the Gulf. Finally, we suggested effective management approaches to tackle the issue including the significance of national regulations and regional cooperation.

Recovery assessment of the branching coral Stylophora pistillata following copper contamination and depuration

Most contemporary coral reefs live under both global (e.g. warming and acidification) and local (e.g. overfishing, pollution) stressors, which may synergistically undermine their resilience to thermal bleaching and diseases. While heavy metal toxicity in reefs has been well characterized, information on corals recovery from acute contamination is lacking. We studied for 42 days the ability of the coral Stylophora pistillata from the Gulf of Aqaba (northern Red Sea) to recover from a short (3 days) and prolonged (14 days) copper (Cu) contamination (1 μg L^-1), after 11 ('Exp3/D11') and 28 ('Exp14/D28') days of depuration, respectively. Cu caused a decrease in chlorophyll content after 3 days, and in net photosynthesis (Pn) after 14 and 42 days. 'Exp14/D28' showed successful recovery based on Pn and relative electron transport rate, as opposed to 'Exp3/D11'. Results suggest the depuration time may be of greater importance than the exposure period to recover from such contamination.

Environmental impact of desalination technologies: A review

Due to the limited availability of freshwater supplies, desalination has become an increasingly reliable process for water supply worldwide, with proved technical and economic feasibility and advantages. Recently, desalination capacity significantly increased from approximately 35 million m³ daily (MCM/day) in 2005 to about 95 MCM/day in 2018. Seawater desalination accounts for about 61% of global desalination capacity, while brackish water desalination accounts for 30%. Membrane desalination, mainly using reverse osmosis (RO), accounts for ¾ of global desalination capacity, with the rest mostly used for thermal desalination using multi-stage flash distillation (MSF), and multi-effect distillation (MED). Despite the undeniable role of desalination for securing water supply in areas where natural freshwater supplies are scarce, desalination impacts the natural environment at different aspects. Environmental impacts (EIs) of the desalination process are different and vary significantly according to the nature of the utilized feedwater, the desalination technology in use, and the management of waste brine generated. In this work, the EIs of each desalination technology were thoroughly investigated, with careful consideration given to different feedwater qualities, and various brine management techniques. Although the different aspects of desalination EIs have been extensively studied in the literature, the literature lacks comprehensive reviews and summaries of all the associated EIs. This article compiles the different EIs associated with the whole desalination process in one-hub, applying an intake-to-outfall approach. The leading desalination technologies of RO, MSF, and MED were analyzed, along with different feedwaters. This article provides a mapping of the different technologies involving feedwater and brine management techniques and a detailed description of their impact on the environment. Finally, recommendations and conclusions were given to minimize the negative impacts of desalination on both the local and global environments.

Environmental impacts of desalination and brine treatment - Challenges and mitigation measures

Desalination is perceived as an effective and reliable process for obtaining freshwater from aqueous saline solutions such as brackish water, seawater and brine. This can be clarified by the fact that >300 million people worldwide rely on desalinated water for their daily needs. Although the desalination process offers many advantages, there are rising concerns about possible adverse environmental impacts. Generally, environmental impacts can be generated both in the construction and operation of desalination plants. A major issue of desalination is the co-produced waste called 'brine' or 'reject' which has a high salinity along with chemical residuals and is discharged into the marine environment. In addition to brine, other main issues are the high energy consumption of the desalination and brine treatment technologies as well as the air pollution due to emissions of greenhouse gasses (GHGs) and air pollutants. Other issues include entrainment and entrapment of marine species, and heavy use of chemicals. The purpose of this review is to analyze the potential impacts of desalination and brine treatment on the environment and suggest mitigation measures.

Revisiting Mean Flow and Mixing Properties of Negatively Round Buoyant Jets Using the Escaping Mass Approach (EMA)

The flow formed by the discharge of inclined turbulent negatively round buoyant jets is common in environmental flow phenomena, especially in the case of brine disposal. The prediction of the mean flow and mixing properties of such flows is based on integral models, experimental results and, recently, on numerical modeling. This paper presents the results of mean flow and mixing characteristics using the escaping mass approach (EMA), a Gaussian model that simulates the escaping masses from the main buoyant jet flow. The EMA model was applied for dense discharge at a quiescent ambient of uniform density for initial discharge inclinations from 15° to 75°, with respect to the horizontal plane. The variations of the dimensionless terminal centerline and the external edge’s height, the horizontal location of the centerline terminal height, the horizontal location of centerline and the external edge’s return point as a function of initial inclination angle are estimated via the EMA model, and compared to available experimental data and other integral or numerical models. Additionally, the same procedure was followed for axial dilutions at the centerline terminal height and return point. The performance of EMA is acceptable for research purposes, and the simplicity and speed of calculations makes it competitive for design and environmental assessment studies.

Can Palythoa cf. variabilis biochemical patterns be used to predict coral reef conservation state in Todos Os Santos Bay?

Coral reefs are one of the most diverse, complex and productive marine ecosystems on the planet. Global climate change and other anthropogenic impacts have had a strong impact on the equilibrium of these ecosystems and causing the denominated "coral reef crisis". One consequence of coral reef crisis is the phase shift in reef communities, where scleractinian corals responsible for the bioconstruction of the coralline building are replaced by macroalgae or soft corals. In Todos os Santos Bay (TSB) there is a rare case of phase shift caused by the soft coral Palythoa cf. variabilis. When in population outbreak, this coral species becomes dominant and leads to loss of scleractinian coral cover. Palythoa genus establishes a symbiotic relationship with dinoflagellate algae of the genus Symbiodinium, that is changed in phase shift coral reefs, but other alterations remain unknown. In this study, the metabolism (oxidative damage, antioxidant and biotransformation enzymes, electron transport chain activity and photosynthetic pigments) of P. cf. variabilis from reefs in different conservation states was studied to identify and relate if changes that may occur in the biochemical and metabolism of the coral might trigger the population outbreak, identify parameters recognizing if corals are in stress and assess if one or more parameters can reflect the level of stress organisms are experiencing. The results obtained evidenced a clear distinction in the biochemistry and metabolism of corals from conserved sites and sites in phase shift, and these changes may be the trigger for population outbreak. Some of the parameters were able to discriminate the level of stress corals are experiencing and may allow to recognize the most at-risk coral reefs that need immediate intervention and prevent the entry into or revert P. cf. variabilis outbreak and phase shift in coral reefs. Actions like these can be of vital importance for the preservation of TSB coral reefs and possibly for other threatened reefs worldwide.

Assessment of Climate Change Impacts on Sea Surface Temperatures and Sea Level Rise—The Arabian Gulf

The Arabian Gulf is one of the regions in the world experiencing major changes due to increased economic growth rates and development practices. As a shallow water body within a hot desert, the Gulf is exposed to obvious warming in the sea surface temperatures (SST). Remotely sensed SST data were utilized to estimate decadal change in SST with a focus on coral reef locations. There is a positive trend in monthly time series SSTs, with a maximum value of about 0.7 °C/decade for the western side of the Gulf. This high trend of SST is associated with significant coral reef bleaching and it coincides with major climate/ocean interactions. Most of the Arabian countries along the Gulf have coastal developments at low-land areas of high vulnerability to sea level rise. Digital elevation models showed that there are more than 3100 km2 of coastal areas that occur at 1 m level along the Arabian countries of the Gulf. Coastal protection and conservation measures are crucial to protect low-lying coasts of urban use.

Prevention is better than cure: Persian Gulf biodiversity vulnerability to the impacts of desalination plants

Due to extremely high rates of evaporation and low precipitation in the Persian Gulf, discharges from desalination plants (DPs) can lead to ecological stresses by increasing water temperatures, salinities, and heavy metal concentrations, as well as decreasing dissolved oxygen levels. We discuss the potential ecological impacts of DPs on marine organisms and propose mitigating measures to reduce the problems induced by DPs discharges. The daily capacity of DPs in the Persian Gulf exceeds 11 million m³ per day, which is approximately half of global daily freshwater production; multistage flash distillation (MSF) is the dominant desalination process. Results from field and laboratory studies indicate that there are potentially serious and chronic threats to marine communities following exposure to DP discharges, especially within the zoobenthos, echinodermata, seagrasses, and coral reefs. DP discharges can lead to decreases in sensitive species, plankton abundance, hard substrate epifauna, and growth rates of seagrasses. However, the broad applicability of any one of these impacts is currently hard to scale because of the limited number of studies that have been conducted to assess the ecological impacts of DP discharge on Persian Gulf organisms. Even so, available data suggest that appropriately sited, designed, and operated DPs combined with current developments in impingement and entrainment reduction technology can mitigate many of the negative environmental impacts of DPs.

Desalination brine disposal methods and treatment technologies - A review

Brine, also known as concentrate, is the by-product of the desalination process that has an adverse impact on the environment due to its high salinity. Hence, viable and cost-effective brine management systems are needed to reduce environmental pollution. Currently, various disposal methods have been practiced, including surface water discharge, sewer discharge, deep-well injection, evaporation ponds and land application. However, these brine disposal methods are unsustainable and restricted by high capital costs and non-universal application. Nowadays, brine treatment is considered one of the most promising alternatives to brine disposal, since treatment results in the reduction of environmental pollution, minimization of waste volume and production of freshwater with high recovery. This review article evaluates current practices in brine management, including disposal methods and treatment technologies. Based upon the side-by-side comparison of technologies, a brine treatment technology framework is introduced to outline the Zero Liquid Discharge (ZLD) approach through high freshwater recovery and wastewater volume minimization. Furthermore, an overview of brine characteristics and its sources, as well as its negative impact on the environment is discussed. Finally, the paper highlights future research areas for brine treatment technologies aiming to enhance the effectiveness and viability of desalination.

Effect of the membrane exclusion mechanism on phosphate scaling during synthetic effluent desalination

Calcium phosphate scaling is one of the main limitations in effluent desalination using membranes. This may be overcome by tailoring membranes with lower rejection of the scalant ions. In this study, we systematically examined the use of negatively and positively charged membranes, rejecting ions mainly based on Donnan exclusion, as a low-scaling alternative to dielectric-exclusion-dominated polyamide NF membranes for effluent desalination. The two charged membranes exhibited a lower calcium and especially phosphate rejection than the polyamide membrane. Consequently, the calcium phosphate supersaturation and then the propensity to scaling of the charged membranes were much lower than the polyamide membrane. This also allowed filtering at a much higher recovery ratio with the charged membranes. It was also found that, despite the fact that the charged membranes had an opposite fixed charge, their scaling behavior was similar. Apparently, although these membranes showed opposite selectivity towards scalant ions (phosphate and calcium) in single salt solutions, the rejection pattern in mixed salt solutions resulted in similar saturation indices, much lower than for polyamide membrane. The scale formed on all three membranes was identified as amorphous calcium phosphate (ACP), although its saturation index was lower than its solubility factor. This was explained by concentration polarization which increases the saturation index in the solution adjacent to the membrane surface. Tests in absence of permeate flux showed a much slower precipitation that took a few days compared with filtration conditions (few hours). In addition, under these conditions, the effect of the scaling on the membrane permeability was generally reduced and the scale contained crystalline calcium phosphate products, different from ACP. The results indicate that the ion rejection and resulting polarization next to the membrane surface plays a crucial role in scaling. Thus, tuning ion selectivity of NF membranes towards scalant ions presents a promising alternative for scaling mitigation during effluent desalination.

DOP Stimulates Heterotrophic Bacterial Production in the Oligotrophic Southeastern Mediterranean Coastal Waters

Phytoplankton and heterotrophic bacteria rely on a suite of inorganic and organic macronutrients to satisfy their cellular needs. Here, we explored the effect of dissolved inorganic phosphate (PO₄) and several dissolved organic molecules containing phosphorus [ATP, glucose-6-phosphate, 2-aminoethylphosphonic acid, collectively referred to as dissolved organic phosphorus (DOP)], on the activity and biomass of autotrophic and heterotrophic microbial populations in the coastal water of the southeastern Mediterranean Sea (SEMS) during summertime. To this end, surface waters were supplemented with PO₄, one of the different organic molecules, or PO₄ + ATP, and measured the PO₄ turnover time (Tt), alkaline phosphatase activity (APA), heterotrophic bacterial production (BP), primary production (PP), and the abundance of the different microbial components. Our results show that PO₄ alone does not stimulate any significant change in most of the autotrophic or heterotrophic bacterial variables tested. ATP addition (alone or with PO₄) triggers the strongest increase in primary and bacterial productivity or biomass. Heterotrophic bacterial abundance and BP respond faster than phytoplankton (24 h post addition) to the various additions of DOP or PO₄ + ATP, followed by a recovery of primary productivity (48 h post addition). These observations suggest that both autotrophic and heterotrophic microbial communities compete for labile organic molecules containing P, such as ATP, to satisfy their cellular needs. It also suggests that SEMS coastal water heterotrophic bacteria are likely C and P co-limited.

Biological and Physical Effects of Brine Discharge from the Carlsbad Desalination Plant and Implications for Future Desalination Plant Constructions

Seawater reverse osmosis (SWRO) desalination is increasingly used as a technology for addressing shortages of freshwater supply and desalination plants are in operation or being planned world-wide and specifically in California, USA. However, the effects of continuous discharge of high-salinity brine into coastal environments are ill-constrained and in California are an issue of public debate. We collected in situ measurements of water chemistry and biological indicators in coastal waters (up to ~2 km from shore) before and after the newly constructed Carlsbad Desalination Plant (Carlsbad, CA, USA) began operations. A bottom water salinity anomaly indicates that the spatial footprint of the brine discharge plume extended about 600 m offshore with salinity up to 2.7 units above ambient (33.2). This exceeds the maximum salinity permitted for this location based on the California Ocean Plan (2015 Amendment to Water Quality Control Plan). However, no significant changes in the assessed biological indicators (benthic macrofauna, BOPA-index, brittle-star survival and growth) were observed at the discharge site. A model of mean ocean wave potential was used as an indicator of coastal mixing at Carlsbad Beach and at other locations in southern and central CA where desalination facilities are proposed. Our results indicated that to minimize environmental impacts discharge should target waters where a long history of anthropogenic activity has already compromised the natural setting. To ensure adequate mixing of the discharge brine desalination plants should be constructed at high-energy sites with sandy substrates, and discharge through diffusor systems.