Control wildfire-induced Microcystis aeruginosa blooms by copper sulfate: Trade-offs between reducing algal organic matter and promoting disinfection byproduct formation

Effects of cupric ions on the formation of chlorinated disinfection byproducts from nitrophenol compounds during UV/post-chlorination

Cupric ions (Cu2+) are ubiquitous in surface waters and can influence disinfection byproducts (DBPs) formation in water disinfection processes. This work explored the effects of Cu2+ on chlorinated DBPs (Cl-DBPs) formation from six representative nitrophenol compounds (NCs) during UV irradiation followed by a subsequent chlorination (i.e., UV/post-chlorination), and the results showed Cu2+ enhanced chlorinated halonitromethane (Cl-HNMs) formation from five NCs (besides 2-methyl-3-nitrophenol) and dichloroacetonitrile (DCAN) and trichloromethane (TCM) formation from six NCs. Nevertheless, excessive Cu2+ might reduce Cl-DBPs formation. Increasing UV fluences displayed different influences on total Cl-DBPs formation from different NCs, and increasing chlorine dosages and NCs concentrations enhanced that. Moreover, a relatively low pH (5.8) or high pH (7.8) might control the yields of total Cl-DBPs produced from different NCs. Notably, Cu2+ enhanced Cl-DBPs formation from NCs during UV/post-chlorination mainly through the catalytic effect on nitro-benzoquinone production and the conversion of Cl-DBPs from nitro-benzoquinone. Additionally, Cu2+ could increase the toxicity of total Cl-DBPs produced from five NCs besides 2-methyl-3-nitrophenol. Finally, the impacts of Cu2+ on Cl-DBPs formation and toxicity in real waters were quite different from those in simulated waters. This study is conducive to further understanding how Cu2+ affected Cl-DBPs formation and toxicity in chlorine disinfection processes and controlling Cl-DBPs formation in copper containing water.

The secondary outbreak risk and mechanisms of Microcystis aeruginosa after H2O2 treatment

The secondary outbreak of cyanobacteria after algicide treatment has been a serious problem to water ecosystems. Hydrogen peroxide (H2O2) is an algaecide widely used in practice, but similar re-bloom problems are inevitably encountered. Our work found that Microcystis aeruginosa (M. aeruginosa) temporarily hibernates after H2O2 treatment, but there is still a risk of secondary outbreaks. Interestingly, the dormant period was as long as 20 and 28 days in 5 mg L-1 and 20 mg L-1 H2O2 treatment groups, respectively, but the photosynthetic activity was both restored much earlier (within 14 days). Subsequently, a quantitative imaging flow cytometry-based method was constructed and confirmed that the re-bloom had undergone two stages including first recovery and then re-division. The expression of ftsZ and fabZ genes showed that M. aeruginosa had active transcription processes related to cell division protein and fatty acid synthesis during the dormancy stat. Furthermore, metabolomics suggested that the recovery of M. aeruginosa was mainly by activating folate and salicylic acid synthesis pathways, which promoted environmental stress resistance, DNA synthesis, and cell membrane repair. This study reported the comprehensive mechanisms of secondary outbreak of M. aeruginosa after H2O2 treatment. The findings suggest that optimizing the dosage and frequency of H2O2, as well as exploring the potential use of salicylic acid and folic acid inhibitors, could be promising directions for future algal control strategies.

Compensatory growth of Microcystis aeruginosa after copper stress and the characteristics of algal extracellular organic matter (EOM)

Cyanobacterial blooms can impair drinking water quality due to the concomitant extracellular organic matter (EOM). As copper is often applied as an algicide, cyanobacteria may experience copper stress. However, it remains uncertain whether algal growth compensation occurs and how EOM characteristics change in response to copper stress. This study investigated the changes in growth conditions, photosynthetic capacity, and EOM characteristics of M. aeruginosa under copper stress. In all copper treatments, M. aeruginosa experienced a growth inhibition stage followed by a growth compensation stage. Notably, although chlorophyll-a fluorescence parameters dropped to zero immediately following high-intensity copper stress (0.2 and 0.5 mg/L), they later recovered to levels exceeding those of the control, indicating that photosystem II was not destroyed by copper stress. Copper stress influenced the dissolved organic carbon (DOC) content, polysaccharides, proteins, excitation-emission matrix spectra, hydrophobicity, and molecular weight (MW) distribution of EOM, with the effects varying based on stress intensity and growth stage. Principal component analysis revealed a correlation between the chlorophyll-a fluorescence parameters and EOM characteristics. These results imply that copper may not be an ideal algicide. Further research is needed to explore the dynamic response of EOM characteristics to environmental stress.

Inactivation of harmful cyanobacteria Microcystis aeruginosa by Cu2+ doped corn stalk biochar treated with different pyrolysis temperatures

In this study, biochars (BCs) derived from corn stalk treated at various pyrolysis temperatures (350-950 °C) were prepared and then loaded with Cu2+ to form highly efficient algaecide, i.e. Cu2+-doped BC composites (Cu-BCs). The results showed BCs pyrolyzed at higher temperatures suppressed the growth of Microcystis aeruginosa in the order of BC550 ≫ BC750 > BC950, while BC350 accelerated cell growth due to the release of inorganic nutrients. The difference could be attributed to the physicochemical characteristics, including specific surface area, adsorption capacity of nutrients and the presence of particularly persistent free radicals. Furthermore, Cu-BCs exhibited the improved inactivation performance, but the 72 h growth inhibition rates and reaction activities of Cu-BCs were still influenced by the Cu2+ loading ratio and pyrolysis temperature. These results, reported for the first time, demonstrated the algae inactivation efficiency of pristine BCs, and Cu-BCs were principally manipulated by the biochar pyrolysis temperature.

Assess the formation of disinfection by-products from pyrogenic dissolved organic matter (pyDOM): impact of wildfire on the water quality of forest watershed

Wildfires can release pyrogenic dissolved organic matter (pyDOM) into the forest watershed, which may pose challenges for water treatment operations downstream due to the formation of disinfection by-products (DBPs). In this study, we systematically assessed the physio-chemical properties of pyDOM (e.g., electron-donating and -accepting capacities; EDC and EAC) and their contributions to DBP formation under different disinfection scenarios using (1) ten lab samples produced from various feedstocks and pyrolysis temperatures, and (2) pre- and post-fire field samples with different burning severities. A comprehensive suite of DBPs-four trihalomethanes (THMs), nine haloacetic acids (HAAs), and seven N-nitrosamines-were included. The formations of THM and HAA showed an up to 5.7- and 8.9-fold decrease as the pyrolysis temperature increased, while the formation of N-nitrosamines exhibited an up to 6.6-fold increase for the laboratory-derived pyDOM. These results were supported by field pyDOM samples, where the post-fire samples consistently showed a higher level of N-nitrosamine formation (i.e., up to 5.3-fold), but lower THMs and HAAs compared to the pre-fire samples. To mimic environmental reducing conditions, two field samples were further reduced electrochemically and compared with Suwannee River natural organic matter (SRNOM) to evaluate their DBP formation. We found increased DBP formation in pyDOM samples following electrochemical reduction but not for SRNOM, which showed increased N-nitrosamines but decreased THMs and HAAs post-electrochemical reduction. Furthermore, this study reported for the first time the formation of two previously overlooked N-nitrosamines (i.e., nitrosodiethylamine (NDEA), N-nitrosodi-n-propylamine (NDPA)) in both laboratory and field pyDOM samples, raising concerns for drinking water safety given their higher toxicity as compared to the regulated counterparts. Results from this study provide new insights for DBP mitigation during post-fire recovery, which are particularly relevant to communities that rely on forest watersheds as their drinking water sources.

Wildfire impact on disinfection byproduct precursor loading in mountain streams and rivers

We investigated short (first post-fire precipitation)- and long-term (11-month) impacts of the Caldor and Mosquito Fires (2021 and 2022) on water quality, dissolved organic matter, and disinfection byproduct (DBP) precursors in burned and adjacent unburned watersheds. Both burned watersheds experienced water quality degradation compared to their paired unburned watersheds, including increases in dissolved organic carbon (DOC), dissolved organic nitrogen (DON), and DBP precursors from precipitation events. DBP precursor concentrations during storm events were greater in the Caldor Fire's burned watershed than in the unburned watershed; precursors of trihalomethanes (THMs), haloacetic acids (HAAs), haloacetonitriles (HANs), and haloacetamides (HAMs) were 533 µg/L, 1,231 µg/L, 64 and 58 µg/L greater. The burned watershed of the Mosquito Fire also had greater median concentrations of THM (44 µg/L), HAA (37 µg/L), HAN (7 µg/L), and HAM (13 µg/L) precursors compared to the unburned watershed during a storm immediately following the fire. Initial flushes from both burned watersheds formed greater concentrations of more toxic DBPs, such as HANs and HAMs. The Caldor Fire burn area experienced a rain-on-snow event shortly after the fire which produced the greatest degradation of water quality of all seasons/precipitation events/watersheds studied. Over the long term, statistical analysis revealed that DOC and DON values in the burned watershed of the Caldor Fire remained higher than the unburned control (0.98 mg C/L and 0.028 mg N/L, respectively). These short and long-term findings indicate that wildfires present potential treatment challenges for public water systems outside of the two studied here.

Building water resilience in the face of cascading wildfire risks

Severe wildfire is altering the natural and the built environment and posing risks to environmental and societal health and well-being, including cascading impacts to water systems and built water infrastructure. Research on wildfire-resilient water systems is growing but not keeping pace with the scale and severity of wildfire impacts, despite their intensifying threat. In this study, we evaluate the state of knowledge regarding wildfire-related hazards to water systems. We propose a holistic framework to assess interactions and feedback loops between water quality, quantity, and infrastructure hazards as determinants of post-fire water availability and access. Efforts to address the evolving threat of wildfires to water systems will require more interdisciplinary research on the complex relationships shaping wildfire's threat to water availability and access. To support this, we need reliable long-term data availability, consistent metrics, greater research in shared contexts, more extensive research beyond the burn area, and multistakeholder collaboration on wildfire risks to water systems.

Complexation of copper algaecide and algal organic matter in algae-laden water: Insights into complex metal-organic interactions

Copper-based algicides have been widely used to suppress algae blooms; however, the release of algal organic matter (AOM) on account of cell lysis may cause significant changes in the mitigation, transformation, and bioavailability of Cu(II). In the present work, the binding characteristics of Cu(II) with AOM were explored via combinative characterization methods, such as high-performance size exclusion chromatography, differential absorption spectra analysis, and joint applications of two-dimensional correlation spectroscopy (2D-COS), as well as heterospectral 2D-COS and moving window 2D-COS analyses of UV, synchronous fluorescence, and FTIR spectra. Carboxyl groups displayed a preferential interaction to Cu(II) binding, followed by polysaccharides. The spectral changes of C]O stretching occur after the change of chromophores in complexation with Cu(II). The AOM chromophores exhibit obvious conformations at Cu(II) concentrations higher than 120 μM, while AOM fluorophores and functional groups exhibit the greatest changes at Cu(II) concentrations lower than 20 μM. All these observations have verified the presence of binding heterogeneity and indicate that AOM could interact with Cu(II) through diverse functional moieties. Therefore, our study contributes to the better understanding of the fate of Cu(II)-AOM complexes in aquatic systems.

A rapid removal of Phaeocystis globosa from seawater by peroxymonosulfate enhanced cellulose nanocrystals coagulation

Cellulose nanocrystals (CNC) are recognized as promising bio-based flocculants for controlling harmful algal blooms (HABs). Due to the charge shielding effect in seawater and the strong mobility of algae cells, CNC can't effectively remove Phaeocystis globosa from seawater. To solve this problem, peroxymonosulfate (PMS) was used to enhance the coagulation of CNC for rapidly removal of P. globosa. The results showed that 91.7% of Chl-a, 95.2% of OD680, and 97.2% of turbidity of P. globosa were reduced within 3 h with the use of 200 mg L-1 of CNC and 20 mg L-1 of PMS. The removal of P. globosa was consisted of inactivation and flocculation. Notably, electron paramagnetic resonance (EPR) spectrums and quenching experiments revealed that the inactivation of P. globosa was dominated by PMS oxidation and 1O2. Subsequently, CNC entrained inactivated algal cells to settle to the bottom to achieve efficient removal of P. globosa. The content of total organic carbon (TOC) and chemical oxygen demand (COD) decreased significantly, indicating that a low emission risk of algal cell effluent was produced in the CNC-PMS system. In view of the excellent performance on P. globosa removal, we believe that the CNC-PMS system has great potential for HABs treatments.

Function of the algicidal bacterium Pseudomonas sp. Go58 isolated from the biofilm on a water plant, and its active compounds, pyoluteorins

In the development of applications to mitigate nuisance cyanobacterial blooms, environmentally friendly approaches have gained much attention. Recently, we found a bacterial strain Go58, which was isolated from the biofilm of a water plant, that showed potent algicidal activity against the bloom-forming cyanobacterium Microcystis aeruginosa. Whole genome sequencing of strain Go58 suggested that it is potentially a novel species closely related to Pseudomonas protegens. Pyoluteorins were obtained from the culture broth of this strain, and they demonstrated high toxicity against cultured cyanobacterial species, including M. aeruginosa and Anabaena cylindrica, but less toxicity against eukaryotic microalgae and other aquatic organisms. The production of pyoluteorin was enhanced by the presence of the target cyanobacterium. When a wild-caught microalgal consortium was treated with either strain Go58 or pyoluteorin, both efficiently suppressed the growth of harmful wild cyanobacteria, but promoted the growth of some specific eukaryotic microalgae. Since P. protegens is globally ubiquitous and highly anticipated to be a biopesticide for infectious diseases in the field of agriculture, the similar bacterial group identified in this study may also have potential as a safe on-site collectable biological countermeasure for controlling cyanobacterial blooms.

Effects of copper sulfate algaecide on the cell growth, physiological characteristics, the metabolic activity of Microcystis aeruginosa and raw water application

Harmful cyanobacteria blooms (HCBs) occurred frequently and become a serious scientific challenge. Copper sulfate (CuSO₄) is a broad-spectrum chemical algaecide to control algae blooms. Herein, the Microcystis aeruginosa was exposed to different CuSO₄ (0.0, 0.2 and 0.5 mg/L) to assess the variations in algal physiological process and metabolic profiles. The results indicated that exposure to CuSO₄ of 0.5 mg/L at 72 h could significantly inhibit the cell growth and photosynthetic capacity of M. aeruginosa, including chl-a content and chlorophyll fluorescence parameters. Plasma membrane damage causing cell lysis of M. aeruginosa increased the K⁺ release. The increase of SOD and CAT suggested that CuSO₄ treatment caused oxidative stress in algal cells. Different doses of CuSO₄ modified the carbon metabolic potential, algal cells had their unique metabolic mode thereby. Moreover, the research further verified that CuSO₄ would also inhibit algal growth and change algal community structure in site-collected water application. Overall, laboratory results of M. aeruginosa to CuSO₄ and site-collected water application of algal responses to CuSO₄ might be conducive to uncovering the controlling mechanism of algae and the potential effect of carbon cycling in an ecological environment.

Formation of emerging disinfection byproducts from agricultural biomass-derived DOM: Overlooked health risk source

Carbon-derived dissolved organic matter (CDOM) are inevitably released to surface water during returning agricultural biomass carbon to farmland, which are potential precursors of disinfection byproducts (DBPs). In this study, CDOM was extracted from aerobic incineration ("OX") and anoxic pyrolysis ("PY") of three kinds of straw (wheat, corn, and rice), and the emerging DBPs from them were deciphered. The CDOM with molecular weight < 1 kDa in the OX and PY groups accounted for 53-87%, and it was higher in the PY group. A total 1343-2107 of CHO and 641-1761 of CHNO formulas were detected in the CDOM derived from the OX group, among which 74%-83% contained aromatic structures rich in oxygen containing groups. 1919-3289 of CHO and 785-1954 of CHNO formulas were observed in the PY group, and 77%-86% of them were lignins/CRAM-like compounds. Surprisingly, 765-2158 and 895-1648 of emerging DBPs were identified in the OX and PY groups, and the proportions of N-DBPs were 20.3-54.8% and 2.8-4.8%, respectively. Based on HOCl addition and Cl substitution mechanisms, the H/C ratios of the DBP precursors in the OX and PY groups were in the range of 0.2-1.5 and 0.6-2.0, respectively. The DBPs derived from the OX group exhibited higher cytotoxicity and genotoxicity due to the higher aromaticity and more N-DBPs. Thus, returning agricultural biomass carbon, particularly that produced by direct combustion, to farmland brought potential threat to drinking water safety.

Efficient removal of Phaeocystis globosa from seawater with the persulfate activation by arbutin-modified cellulose nanocrystals

Harmful algal blooms (HABs) from seawater have a severe threat to human health, aquaculture, and coastal nuclear power safety. Thus, it is highly desirable to explore environmentally friendly, efficient, and economic methods for controlling HABs. Herein, the arbutin-modified cellulose nanocrystals (AT-CNC) activated persulfate (PS), as a novel heterogeneous Fenton-like process, was proposed to remove Phaeocystis globosa (P. globosa) from seawater. The AT-CNC was synthesized via the surface modification of AT on CNC. The effects of AT dosage, CNC dosage, and PS dosage on the removal performance of P. globosa were investigated. With the addition of 530 mg/L AT-CNC (6 wt% AT/CNC of AT loading) and 120 mg/L PS, the removal percentage of chlorophyll a (R_c), optical density at 680 nm (R_o) and turbidity (R_t) reached 97.7%, 91.9% and 85.2% at 24 h. According to electron paramagnetic resonance (EPR) spectra and radical quenching tests, the predominant free radicals inactivating P. globosa were hydroxyl radicals (^•OH). Additionally, the flocculation of the inactivated algae cells by AT-CNC was also critical for removing P. globosa. Moreover, a positive environmental impact was achieved in the AT-CNC-PS system due to the reduction of nitrogen, phosphorus and organic carbon contents. Based on the excellent removal performance for P. globosa, we believe that the AT-CNC activated persulfate is a promising option for HABs control.

Flocculation of Chlorella vulgaris-induced algal blooms: critical conditions and mechanisms

Algal blooms have posed great threats to livestocks and human health. Although flocculation is effective, its efficiency may hinder the direct application for algal blooms. In this study, critical (optimal) conditions and mechanisms for AlCl₃, FeCl₃, poly-aluminum chloride (PAC), chitosan, and polydimethyldiallylammonium chloride (PDADMAC)-induced flocculation of Chlorella vulgaris (C. vulgaris) were studied. Results identified the critical conditions which can cause flocculation efficiencies over 90% in 45 min for the five flocculants. Specifically, 4~10-mg/L doses of PDADMAC were proved to be appropriate for the treatment of C. vulgaris-induced algal blooms at pH 6.0~12.0. To probe the underlying mechanisms, functional groups involved in flocculation, zeta potential, and species distribution were analyzed during flocculation. FT-IR results indicated that N-H stretching in amine and C-H deformation in aliphatics were involved in algal flocculation with FeCl₃, and C-H deformation played an important role with PDADMAC, PAC, and chitosan. For AlCl₃, zeta potential and species distribution results suggested that charge neutralization and adsorption bridging were responsible for algal flocculation at pH 6~8. However, adsorption bridging and sweeping effects were the main mechanisms at pH >3 for FeCl₃. The flocculation mechanisms for the rest of the three polymers were charge neutralization, adsorption bridging, and sweeping. Meanwhile, all the flocculation processes followed second-order kinetics. Strong linkages were found between the rate constant, fractal dimension, and flocculation efficiency (P < 0.05). The results of critical flocculation conditions and mechanisms indicated that PDADMAC was an excellent flocculant for C. vulgaris removing and recycling, especially in water bloom treatment.

A innovative stepwise strategy using magnetic Fe3O4-co-graft tannin/polyethyleneimine composites in a coupled process of sulfate radical-advanced oxidation processes to control harmful algal blooms

A novel co-graft tannin and polyethyleneimine co-coating magnetic composite (TP@Fe₃O₄) was prepared in the study. On this premise, an unique stepwise efficient strategy based on magnetic flocculation and Sulfate radical (SO₄^•-)-advanced oxidation processes (S-AOPs) for eliminating Microcystis aeruginosa (M. aeruginosa) and algal organic matters (AOMs) was presented. Due to the high positive charge of TP@Fe₃O₄, a > 99 % high algae removal rate was obtained at a modest TP@Fe₃O₄ dosage of 100 mg/L at pH = 8.0 with a short separation time of 5 min. Further, peroxymonosulfate (PMS) treatment was employed as a pre-oxidation method to lower cell stability and promote M. aeruginosa removal by subsequent TP@Fe₃O₄ flocculation. The PMS/TP@Fe₃O₄ system successfully cuts the optimum dose of TP@Fe₃O₄ in half (50 mg/L) without causing obvious cell damage. Following algal fast magnetic separation, ultraviolet (UV) was introduced to activate PMS to totally degrade AOM and microcystin. Response surface methodology (RSM) demonstrated that UV/PMS oxidation removed > 80 % of DOC and > 94 % of microcystin under optimal conditions. SO₄^•- was the main radical species that aided in the elimination of AOM. This is the first study to use magnetic flocculation in conjunction with AOPs to mitigate harmful algal blooms, which can enable the non-destructive eradication of M. aeruginosa while also efficiently degrading AOMs.

Efficient inhibition of cyanobacteria M. aeruginosa growth using commercial food-grade fumaric acid

The control of cyanobacteria blooms is a global challenge. Here, we reported the efficient inhibition of M. aeruginosa by fumaric acid (FA), an intermediate metabolite of the tricarboxylic acid cycle. FA showed strong algicidal activity with an inhibition rate of 90.5% on the 8th day at a dose of 40 mg/L. The presence of FA caused severe membrane damage, as suggested by the fluorescence flow cytometry and morphology analysis. FA inhibited the formation of chlorophyll a, interrupting the photosynthesis system. It also induced oxidative stress in cells. Principal component analysis of the indicators suggested that the FA-treated sample had a significantly different inhibitory pattern than the acid-treated sample. Thus, the inhibitory effect was not solely caused by the pH effect. Untargeted metabolomic analysis revealed that 31 metabolites were differentially expressed in response to FA stress, which were mainly involved in the metabolite processes and the membranes. A commercial food-grade FA was able to inhibit the growth of M. aeruginosa similar to the analytical-grade FA. Our results suggest that FA can be potentially an efficient and low-risk chemical for inhibiting M. aeruginosa growth, which may find future applications in cyanobacteria bloom control.

Strain-boosted hyperoxic graphene oxide efficiently loading and improving performances of microcystinase

Harmful Microcystis blooms (HMBs) and microcystins (MCs) that are produced by Microcystis seriously threaten water ecosystems and human health. This study demonstrates an eco-friendly strategy for simultaneous removal of MCs and HMBs by adopting unique hyperoxic graphene oxides (HGOs) as carrier and pure microcystinase A (PMlrA) as connecting bridge to form stable HGOs@MlrA composite. After oxidation, HGOs yield inherent structural strain effects for boosting the immobilization of MlrA by material characterization and density functional theory calculations. HGO₅ exhibits higher loading capacities for crude MlrA (1,559 mg·g⁻¹) and pure MlrA (1,659 mg·g⁻¹). Moreover, the performances of HGO₅@MlrA composite, including the capability of removing MCs and HMBs, the ecological and human safety compared to MlrA or HGO₅ treatment alone, have been studied. These results indicate that HGO₅ can be used as a promising candidate material to effectively improve the application potential of MlrA in the simultaneous removal of MCs and HMBs.

•

Hyperoxic graphene oxide (HGO₅) provides inherent strain effects

•

HGO₅ exhibits an impressive loading capacity for MlrA

•

A new assembly mechanism for the HGO₅@MlrA composite is proposed

•

HGO₅@MlrA composite shows excellent capability and ecological safety

FT-ICR/MS deciphers formation of unknown macromolecular disinfection byproducts from algal organic matters after plasma oxidation

Algal organic matter (AOM) is a potential precursor of disinfection byproducts (DBPs) in water treatment. It is a major challenge to identify macromolecular DBPs due to the diversity of AOM. In this study, Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR/MS) was applied to diagnose the AOM diversity after algae removal by plasma oxidation and to recognize the macromolecular DBPs in subsequent chlorination. Significant removal of AOM released by M. aeruginosa, C. raciborskii, and A. spiroies was achieved by plasma oxidation, accompanied by decrease in the proportion of CHNO formulas and increase in CHO formulas. Without plasma treatment, chlorination generated approximately 2486 macromolecular carbonaceous DBPs (C-DBPs) and 1984 nitrogenous DBPs (N-DBPs), with C₁₁H_nO_mCl_x and C₁₈H_nN_mO_zCl_x as the most abundant DBPs. The numbers of C-DBPs and N-DBPs decreased by 63.3% and 62.9%, respectively, if plasma treatment was applied prior to chlorination. Network computational analysis revealed that Cl substitution was the main formation pathway of AOM-derived DBP formation rather than HOCl addition. The precursors of macromolecular DBPs contained a characteristic atomic number of C and O (7 ≤ C ≤ 18; 3 ≤ O ≤ 11). This study firstly disclosed the relationship between AOM diversity and novel macromolecular DBPs during algae-laden water treatment.

Effect of trace elements in the toxicity of copper to Chlamydomonas reinhardtii

Copper sulfate (CuSO₄) is widely used in the control of algal blooms. Cu can promote or inhibit algal growth, while also affecting trace element uptake, therefore, the response mechanisms of algae cells under Cu²⁺ interference should be studied. In this study, wild-type Chlamydomonas reinhardtii (C. reinhardtii) and wall-less mutant C. reinhardtii were selected as the research objects. Except for the cell wall, these two algae were physiologically the same. While manipulating the concentration of Cu, the accumulation of Cu, Fe, Zn, and Mn by the two algal cell types was studied. The cell wall hindered the accumulation of Cu by cells and alleviated the toxicity of Cu to C. reinhardtii. The addition of Cu increased the accumulation of Fe by both cell types. In an environment with excess Cu, the total amount of Zn and Mn accumulated by cells also increased. On the one hand, this may be due to the synergistic and antagonistic effects of trace elements in the adsorption and uptake process, and on the other hand, it may be due to the changes in metal speciation in the culture medium. In addition, the difference in the total accumulation of various trace elements between wild-type and wall-less-type C. reinhardtii may be due to the structure and function differences between cell wall and cell membrane. At the same time, by measuring the changes in the levels of glutathione (GSH) in algal cells, the relevant mechanisms underlying the algae's uptake of trace elements by algae were further explored.

Abundant Allelochemicals and the Inhibitory Mechanism of the Phenolic Acids in Water Dropwort for the Control of Microcystis aeruginosa Blooms

In recent years, with the frequent global occurrence of harmful algal blooms, the use of plant allelopathy to control algal blooms has attracted special and wide attention. This study validates the possibility of turning water dropwort into a biological resource to inhibit the growth of harmful Microcystis aeruginosa blooms via allelopathy. The results revealed that there were 33 types of allelopathic compounds in the water dropwort culture water, of which 15 were phenolic acids. Regarding water dropwort itself, 18 phenolic acids were discovered in all the organs of water dropwort via a targeted metabolomics analysis; they were found to be mainly synthesized in the leaves and then transported to the roots and then ultimately released into culture water where they inhibited M. aeruginosa growth. Next, three types of phenolic acids synthesized in water dropwort, i.e., benzoic, salicylic, and ferulic acids, were selected to clarify their inhibitory effects on the growth of M. aeruginosa and their mechanism(s) of action. It was found that the inhibitory effect of phenolic acids on the growth of M. aeruginosa increased with the increase of the exposure concentration, although the algae cells were more sensitive to benzoic acid than to salicylic and ferulic acids. Further study indicated that the inhibitory effects of the three phenolic acids on the growth of M. aeruginosa were largely due to the simultaneous action of reducing the number of cells, damaging the integrity of the cell membrane, inhibiting chlorophyll a (Chl-a) synthesis, decreasing the values of F₀ and F_v/F_m, and increasing the activity of the antioxidant enzymes (SOD, POD, and CAT) of M. aeruginosa. Thus, the results of this study indicate that both culture water including the rich allelochemicals in water dropwort and biological algae inhibitors made from water dropwort could be used to control the growth of noxious algae in the future.

Histological alterations, oxidative stress, and inflammatory response in the liver of swamp eel (Monopterus albus) acutely exposed to copper

Copper (Cu) is widely used as an essential trace element in diets as well as a therapeutic chemical. However, excessive Cu has deleterious effects on organisms, including teleosts. Although numerous toxic effects of Cu have been reported, the effects of Cu exposure on the swamp eel (Monopterus albus) as well as the underlying mechanisms have not yet been elucidated. In this study, swamp eels were acutely exposed to 100, 200, and 400 μg/L of Cu for 96 h to evaluate liver histopathology, oxidative stress, and inflammation. Dissolution of hepatocyte membrane, vacuolar degeneration, and inflammatory cell infiltration were detected in the livers of the Cu-treated swamp eels, especially in the 400 μg Cu/L group. Cu-induced hepatic dysfunction was further verified by the elevated activities of glutamate oxaloacetate transaminase (GOT) and glutamate pyruvate transaminase (GPT) and transcript levels of GOT and GPT genes. In addition, Cu exposure decreased the activities of total superoxide dismutase T-SOD and catalase (CAT) and the contents of glutathione (GSH) and total antioxidant capacity (T-AOC) and increased the levels of malondialdehyde (MDA). Cu exposure also significantly decreased the transcript levels of glutathione synthetase (GSS) and increased the transcript levels of SOD1, SOD2, CAT, and heme oxygenase-1 (HO-1) genes. Furthermore, pro-inflammatory genes such as interleukin (IL)-1β, tumor necrosis factor-α (TNF-α), and IL-8 were significantly upregulated. These results indicate that Cu induces oxidative stress and inflammatory response and causes pathological changes in the liver of the swamp eel.

Allelopathic effects and potential allelochemical of Sargassum fusiforme on red tide microalgae Heterosigma akashiwo

In this study, we aim to explore the allelochemicals of marine brown algae Sargassum fusiforme and the mechanism of allelopathy effect on Heterosigma akashiwo. Six potential allelopathic substances, palmitic acid, arachidonic acid, α-linolenic acid (ALA), fucosterol, 24-hydroperoxy-24-vinylcholesterol, and saringosterowere, were isolated and identified from S. fusiforme by column chromatography, NMR, TOF-MS and GC-MS analyses. The ALA and 24-hydroperoxy-24-vinylcholesterol showed remarkable inhibitory activities on H. akashiwo growth. Besides, the allelopathic mechanism between the ALA and H. akashiwo was preliminarily investigated. The results indicated that the activities of SOD and POD of H. akashiwo gradually decreased under high ALA concentration. The reduction of photosynthetic pigments and chlorophyll fluorescence parameters, as well as apparent electron transport rate in H. akashiwo cells, aggravated gradually with increasing the concentration of the ALA. In summary, this study revealed the responses of morphology and physiology of H. akashiwo when exposed by ALA, while revealing the potential of macroalgae in red tide control.

Microcystis aeruginosa removal by peroxides of hydrogen peroxide, peroxymonosulfate and peroxydisulfate without additional activators

Harmful algal bloom (HAB) is one of the most globally severe challenges in ecological system and water safety. Hydrogen peroxide has been commonly used in the management/treatment. Solid oxidants (e.g., peroxymonosulfate (PMS) and peroxydisulfate (PDS)) may outperform liquid H₂O₂ due to ease in transportation, handling, and applications. However, the information on applications of PMS and PDS in algae treatment is limited. In this study, the two solid peroxides and H₂O₂ were investigated for the removal of the blue-green algae of Microcystis aeruginosa. H₂O₂ and PMS effectively removed algae in 2 d at pH 5.0, 7.0 and 9.0, while PDS was only effective at pH 5.0. The change in pH and the release of dissolved organic carbon were insignificant at 0.2 mM H₂O₂ and PMS. The PMS could degrade microcystin-LR and phycobiliproteins. The studies of phycobiliproteins degradation and scanning electron microscopy indicated that PMS might cause the cell inactivation mainly by damaging the chemical components in algae cell wall and membrane while H₂O₂ might mainly enter the cell to form oxidation pressure to kill algae. The scavenger experiments showed that radicals were not crucial in H₂O₂ and PDS applications. Similarly, the algae removal by PMS was obtained mainly by non-radical pathways; about 77% was direct PMS oxidation and no more than 3% was singlet oxygen-mediated process, while radical pathways of sulfate radical and hydroxyl radical accounted for 18% and 2%, respectively. For the realistic algae-contaminated natural water, the PMS effectively lasted for 60 d, while the H₂O₂ lasted for 12 d. This research work demonstrates that the PMS is promising in control of HAB. The findings can provide some useful design and application parameters of PMS technology for better management/treatment of algae-contaminated water.

Development of adaptive neuro-fuzzy inference system model for predict trihalomethane formation potential in distribution network simulation test

Trihalomethanes (THMs), which is one of the major classes of DBP known to be highly cytotoxic and genotoxic, were formed and modeled under controlled conditions by laboratory-scale distribution network simulation test. The formation potentials of THM depending on the parameters such as natural organic matter, bromide, chlorine, pH, and contact time were determined. Subsequently, the Adaptive Neuro-Fuzzy Inference System (ANFIS) model was developed using these parameters as inputs and THM formation potentials as output, and the correlation coefficient was 0.9817. In the range of the inputs, the ANFIS model representing the simulation test results were compared with THM formations of an actual distribution network system in dry and wet seasons. As a result, the predictions of the ANFIS model were little affected by the unidentified factors that were not used in model training but are known to affect THM formations in real waters and gave more consistent results than the EPA model.

Effects of fish feed addition scenarios with prometryn on Microcystis aeruginosa growth and water qualities

The number of undesirable environmental impacts of fish feed has been reported widely. Although repeated fish feed exposures are more prospective to occur in water, previous studies were mostly conducted as a single exposure of fish feed. In order to fill these gaps, a 40 days incubator experiment was conducted to explore the effects of fish feed addition scenarios during the lag phase with prometryn on both Microcystis aeruginosa growth and concentrations of nutrients. The maximum algae densities in groups of single exposure were 6.0-26.2% and 8.8-74.4% higher than those in groups of double and triple exposures, respectively (P < 0.05). At the beginning of the experiment, concentrations of nutrients in groups with different feed exposure scenarios were significantly different. The pattern of nutrient limitation showed a transformation from phosphorus limitation to nitrogen limitation generally. Furthermore, the average inhibition rates of algae by prometryn in the case of a single fish feed exposure were 4.6-9.4% lower than those under double exposures, and 22.0-26.8% lower than those under triple exposures (P < 0.05). In addition, algae growth rates have been developed as a function of concentrations of consumed nutrients (R² = 0.410-0.932). Based on the above results, we concluded that in terms of limiting algae growth multiple low-dosage additions of fish feed were considered as a better addition pattern. By optimizing feed addition scenarios, there is considerable potential to increase the environmental sustainability of aquaculture.

Characterization of Dissolved Organic Matter from Wildfire-induced Microcystis aeruginosa Blooms controlled by Copper Sulfate as Disinfection Byproduct Precursors Using APPI(-) and ESI(-) FT-ICR MS

Copper-based algaecides are usually used for controlling algae bloom triggered by the elevated levels of nutrients after wildfires, resulting in the promoted reactivity of dissolved organic matter (DOM) in forming disinfectant byproducts (DBPs). To identify the best strategy for handling this source water, we employed Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) to characterize the DBPs precursors after 4-d Microcystis aeruginosa bloom cultured with black (BE) and white (WE) ash water extracts under 0, 0.5, and 1.0 mg-Cu/L. The disappeared DOM during disinfections, primarily composed of O_1-14, N₁O_1-14 and N₂O_1-14, had a higher average molecular weight (MW) and double-bond equivalent (DBE), relative to DOM after incubation, regardless of disinfects and Cu²⁺. This result suggests assigned features with larger MW and more double bonds/rings as preferable DBP precursors. We observed a larger number of disappeared assigned features with low DBE of 1-10 in control without Cu²⁺ addition, possibly explaining lower DOM chlorine reactivity in forming carbonaceous and oxygenated DBPs, relative to the treatments with Cu²⁺ addition. We found a larger number of O_1-14 and N₁O_1-14 with DBE=5-16 in the treatments, potentially explaining higher DOM chloramine reactivity in forming N-nitrosodimethylamine (NDMA), compared to the control. Our study suggests removing oxygen- and nitrogen-containing organic compounds with more double bonds/aromatic rings as a preferable strategy for handling source water after controlling post-fire algae blooms with copper sulfate.

Electric-field enhanced microalgae inactivation using a flow-through copper ionization cell

Using copper (Cu) to treat algal blooms is a commonly accepted method worldwide. However, the release of Cu may cause environmental and health risk. It is required to exploit an efficient way to reduce the Cu concentration but improve the algicidal effectiveness. Here, a Cu ionization cell (CIC) was designed and utilized in a flow-through system for inactivation of two bloom-forming microalgae species, Chlorella vulgaris and Microcystis aeruginosa. The results showed that the in-situ Cu release in the CIC treatment cause efficient microalgae inactivation. The 96 h-growth inhibition for C. vulgaris and M. aeruginosa reached 98.5 ± 3.1 % and 75.9 ± 2.0 % at a flow rate of 5 mL/min with the effluent Cu concentration of 554 ± 9 μg/L and 613 ± 17 μg/L, respectively. The maximum quantum yield (F_v/F_m) inhibitions of C. vulgaris and M. aeruginosa were 37.0 ± 1.6 % and 70.9 ± 2.1 %. The electric field enhanced CIC treatment has a locally higher Cu level because of the in-situ release. The CIC improved the microalgae inactivation performance by increasing the microalgae cell membrane permeability with excessive Cu uptake. The energy consumption was only 16.8 J/L. The in-situ Cu treatment in this work provides a microalgae inactivation method with the more environment-friendly and cost-effective prospect.

Water-lifting aerator reduces algal growth in stratified drinking water reservoir: Novel insights into algal metabolic profiling and engineering applications

Water-lifting aerator (WLA) which was developed by Professor Tinglin Huang at Xi'an University of Architecture and Technology, China has multi-functional water quality improvement that significantly inhibits the occurrence of harmful algal blooms (HABs) in deep drinking water reservoirs. However, the biological mechanism of WLA to the suppress algal growth has not been comprehensively understood. Here, the cellular mechanism that allows WLA to control HABs was explored based on the combination of both laboratory simulation and field investigation. Under simulated hydrodynamic conditions, the results showed that the cell density, chlorophyll a content, chlorophyll fluorescence parameters, and dehydrogenase activity in Microcystis aeruginosa all peaked under light conditions at 25 °C. The metabolic activity of M. aeruginosa varied significantly under low temperature at 6 °C and light conditions when cultured for 48 h. The extracellular organic matter (EOM) and intracellular organic matter (IOM) contents of M. aeruginosa were both resolved into three components. Moreover, the total fluorescence intensities from EOM and IOM both peaked under light conditions at 25 °C. The field investigation showed that the growth of algae was decreased significantly in Lijiahe drinking water reservoir with WLA application. The chlorophyll fluorescence parameters decreased significantly after vertical mixing, thereby indicating that the WLA weakened the photosynthetic ability and reduced the biological activity of algae in situ. In addition, the WLA significantly affected the vertical distribution of the phytoplankton community composition. Altogether, these results shed new lights on understanding the control of algal blooms by WLA in stratified drinking water reservoirs. WLA has broad prospect of engineering applications, which can control algal blooms of water supply resources in situ, therefore, reduce the content of disinfection by-products in drinking water treatment plants.

Mechanisms of detoxification of high copper concentrations by the microalga Chlorella sorokiniana

Microalgae have evolved mechanisms to respond to changes in copper ion availability, which are very important for normal cellular function, to tolerate metal pollution of aquatic ecosystems, and for modulation of copper bioavailability and toxicity to other organisms. Knowledge and application of these mechanisms will benefit the use of microalgae in wastewater processing and biomass production, and the use of copper compounds in the suppression of harmful algal blooms. Here, using electron microscopy, synchrotron radiation-based Fourier transform infrared spectroscopy, electron paramagnetic resonance spectroscopy, and X-ray absorption fine structure spectroscopy, we show that the microalga Chlorella sorokiniana responds promptly to Cu2+ at high non-toxic concentration, by mucilage release, alterations in the architecture of the outer cell wall layer and lipid structures, and polyphosphate accumulation within mucilage matrix. The main route of copper detoxification is by Cu2+ coordination to polyphosphates in penta-coordinated geometry. The sequestrated Cu2+ was accessible and could be released by extracellular chelating agents. Finally, the reduction in Cu2+ to Cu1+ appears also to take place. These findings reveal the biochemical basis of the capacity of microalgae to adapt to high external copper concentrations and to serve as both, sinks and pools of environmental copper.

Formation of algal-derived nitrogenous disinfection by-products during chlorination and chloramination

Algal cells and algal organic matter (AOM) are a source of high dissolved organic carbon (DOC) and nitrogen (DON) concentrations. This poses a possible health risk due to their potential to form disinfection by-products (DBPs), some of which may be of health concern, after disinfection. While several studies have focussed on the formation of carbonaceous DBPs from AOM, only a few studies have focussed on the formation of nitrogen containing N-DBPs from AOM. Hence, the main aim of this study was to thoroughly investigate the N-DBP formation potential of the AOM from a species of cyanobacteria commonly found in natural waters, Microcystis aeruginosa. Three haloacetonitriles, two halonitromethanes, two haloacetamides, and eight N-nitrosamines were analysed by gas chromatography-mass spectrometry after chlorination and chloramination of the extracted AOM. To provide further insight into the influence of changing DON character on N-DBP formation potential, the AOM from three other species, Chlorella vulgaris, Dolichospermum circinale and Cylindrospermopsis raciborskii, were also tested. Dichloroacetonitrile (DCAN) was the DBP formed in the highest concentrations for both chlorination and chloramination of bulk AOM from all the species. Furthermore, during chlorination and chloramination, the high molecular weight fraction (>1 kDa) of AOM from M. aeruginosa had a greater DCAN formation potential (normalised to DOC or DON) than the AOM in the low molecular weight fraction (<1 kDa) of M. aeruginosa, regardless of growth stage. N-Nitrosamine formation from the bulk AOM of all species occurred only after chloramination. The molar concentration of N-nitrosodimethylamine (NDMA) was lower than the other N-nitrosamines detected. However, NDMA formation increased with culture age for all four species, in contrast to most other N-nitrosamines whose formation remained consistent or decreased with culture age. Overall, algal growth could result in elevated concentrations of N-DBPs due to the increasing concentrations of high molecular weight algal DON in the AOM. It is suggested that the AOM comprises precursors containing long C-chain amine (R₁-NH-R₂) or cyclic N-containing amine structures. Comparisons to previously measured N-DBP concentrations in drinking water suggest that the AOM from the algae and cyanobacteria examined in this study are not likely to be a major source of precursors for either DCAN or NDMA in real waters. However, AOM may present a major precursor source for other N-nitrosamines.

Microbial quality of surface water and subsurface soil after wildfire

Runoff from wildfire affected areas typically carries high concentrations of fine burned residues or eroded sediment and deposits them in surface water bodies or on subsurface soils. Although the role of wildfire residues in increasing the concentration of chemical contaminants in both environments is known, whether and to what degree wildfire residues may affect microbial contaminants is poorly understood. To examine the effect of wildfire residues on growth and die-off of Escherichia coli (E. coli) -a pathogen indicator, we mixed stormwater with E. coli and suspended particles from the pre- and post-wildfire area in batch reactors and monitored E. coli concentration. E. coli grew initially in the presence of all particles, but the relative E. coli concentration was 10 times lower in the presence of wildfire residues than in natural soil from unaffected areas. Wildfire residues also decreased the persistence of E. coli during a 15-day incubation period. These results indicate that the growth or persistence of E. coli in surface water in the presence of wildfire residues was less than that in the presence of unburned soil particles, potentially due to depletion of nutrient concentration and/or loss of viability of bacteria in the presence of wildfire residues. To examine the transport potential of wildfire residues and their ability to facilitate the transport of E. coli in the subsurface system, suspensions containing wildfire residues and/or E. coli were injected through unsaturated sand columns-a model subsurface system. Transport of wildfire residues in sand columns increased with decreases in the depth and increases in the concentration of particles, but increased transport of wildfire residues did not result in the increased transport of E. coli, suggesting wildfire residues do not facilitate the transport of E. coli. Overall, the results indicate that wildfire residues may not increase the risk of the microbial contamination of surface water or groundwater via subsurface infiltration.

The allelopathic effects of aqueous extracts from Spartina alterniflora on controlling the Microcystis aeruginosa blooms

The Microcystis aeruginosa (M. aeruginosa) blooms and Spartina alterniflora (S. alterniflora) invasion have caused serious damage to local ecological environment. This study validated the possibility of transforming the abandoned S. alterniflora into a biological resource to inhibit M. aeruginosa blooms through allelopathy. The results showed that the inhibitory effect became stronger with the increasing S. alterniflora concentration by decreasing chlorophyll a and weakening photosynthesis when S. alterniflora aqueous extract concentration was over 0.05 g/mL. The results of GC-MS showed that Cyclohexane, Heptane, 2-Cyclohexen-1-one, Hexadecanoic acid, 2,4-Di-tert-butylphenol and Hydrocinnamic acid may be the main allelochemicals. In addition, the S. alterniflora aqueous extract had little effect on the relative abundance and diversity of microbial communities in the culture system. This study provided a novel idea of controlling the M. aeruginosa blooms using the rapidly expanding S. alterniflora.

Effect of oxoanions on oxidant decay, bromate and brominated disinfection by-product formation during chlorination in the presence of copper corrosion products

The present study investigated the effect of oxoanions on catalytic behaviour of copper corrosion products (CCPs) during chlorination of bromide-containing waters. Three types of oxoanions (carbonate, sulphate, and phosphate) and four types of CCPs (Cu²⁺, Cu(OH)₂, Cu₂O, and CuO) were involved in investigation and the effect of oxoanions concentration was also examined. The result indicated that carbonate and sulphate slightly inhibited oxidant decay in the presence of CCPs, but the formation of brominated disinfection by-products (Br-DBPs) remained largely unchanged. In contrast, the presence of phosphate (0.2-1 mM) almost eliminated the catalytic effect of Cu²⁺. For CCP solids (i.e. Cu(OH)₂, Cu₂O, and CuO), phosphate preferentially inhibited the formation of bromate rather than Br-DBPs. Despite the catalysis by CCP solids was reduced to some extent, the oxidant decay rate and bromate and Br-DBP formation were still significantly higher than blank groups, even at high phosphate concentration. By testing different addition scheme (simultaneous/sequential addition), it was proposed that phosphate was a strong competitor for hypohalites, rapidly destroying CCPs-hypohalites complexes on some adsorption sites. However, there were some specific sites that can only be adsorbed by hypohalites, leading to the incomplete inhibition of phosphate. Finally, the inhibition effect of phosphate on CCPs catalysis was tested in real water matrix. For Cu²⁺, higher reduction of bromate and Br-DBPs was found in raw water rather than filtered water, while converse pattern was true for Cu(OH)₂ and Cu₂O, and this discrepancy can be ascribed to the difference in catalytic mechanism between Cu²⁺ and CCP solids.

Comparative physiological tolerance of unicellular and colonial Microcystis aeruginosa to extract from Acorus calamus rhizome

Microcystis blooms and their associated microcystins pose a significant health risk to humans. Microcystis normally occurs as colonies in eutrophic water bodies, and its physiological tolerance to algaecides is dissimilar to that of unicellular forms. However, the differences of physiological response to algaecides between unicellular and colonial Microcystis have been poorly explored. The current study investigated the effects of hexane extract of Acorus calamus rhizome (HEACR) on the physiological and photosynthetic mechanisms of unicellular and colonial M. aeruginosa in the laboratory. We analyzed the cell density, reactive oxygen species (ROS) level, malonaldehyde (MDA) content, photosynthetic pigments, capsular polysaccharide (CPS), and photosystem (PS II) parameters of the two morphological forms of Microcystis. Our results show that HEACR suppresses the growth of both unicellular and colonial M. aeruginosa, increases the intracellular ROS level and cause lipid peroxidation, as well as exerting a detrimental effect on chlorophyll a (chl a) content and photosynthetic efficiency. Almost 100% inhibition was observed for unicellular and colonial M. aeruginosa after 3 d exposure to 50 and 100 mg L^-1 HEACR, respectively. The ROS level increase, MDA accumulation, the chl a decrease and carotenoid increase in unicellular M. aeruginosa were all more obvious than that in colonial cells. The fall in photosynthetic efficiency of unicellular M. aeruginosa were also more significant than that of colonial cells. After 3d exposure, the maximum quantum yield of PS II photochemistry (Fv/Fm), effective quantum yield of PS II photochemistry (Fv'/Fm') and effective quantum yield of photochemical energy conversion in PS II (YII) of unicellular M. aeruginosa was almost totally inhibited by 20 mg L^-1 HEACR, while the F_v/F_m, F_v'/F_m' and YII of colonial M. aeruginosa decreased by 43%, 26% and 66% for 100 mg L^-1 of HEACR, respectively. Comparing the two morphological forms of Microcystis, colonies show a greater increase in CPS level to more effectively resist the stress of HEACR and to mitigate ROS generation thereby better defending against oxidative damage. Furthermore, colonial M. aeruginosa shows better photoprotection ability than the unicellular form when exposed to HEACR. The colonies also sustain their maximum electron transport rate, increase their tolerance to strong light, and maintain a higher ability to disperse excess energy. These results demonstrated that HEACR can significantly interfere with the growth and physiological processes of both unicellular and colonial M. aeruginosa, but that colonial M. aeruginosa has a greater ability to adjust physiological tolerance to resist the stresses of HEACR.

Identification and characterization of a novel indigenous algicidal bacterium Chryseobacterium species against Microcystis aeruginosa

Harmful Microcystis aeruginosa blooms occurred frequently in many eutrophic lakes and rivers with resultant serious global environmental consequences. Algicidal bacteria may play an important role in inhibiting the growth of Microcystis aeruginosa and are considered as an effective method for preventing the appearance of blooms. In order to counteract the harmful effects of Microcystis aeruginosa, a critical step is to identify, isolate and characterize indigenous algicidal bacteria. This study aimed to isolate a novel indigenous algicidal bacterium identified as Chryseobacterium species based upon its 16S rDNA sequence analysis, and determine whether this bacterium was effective in lysing Microcystis aeruginosa FACHB 905. The influence of environmental factors including temperature, pH, quantity of Chryseobacterium species as well as Microcystis aeruginosa concentration were examined with respect to algae-lysing properties of this bacterial strain. Data demonstrated that the highest algae-lysing activity of 80% against Microcystis aeruginosa FACHB 905 occurred within 72 hr. In addition, the algae-lysing activities of Chryseobacterium species cells were significantly higher than those of cell-free supernatant. In conclusion, data showed the algicidal bacterium Chryseobacterium species exhibited potent Microcystis aeruginosa-lysing activities and attacked Microcystis aeruginosa directly suggesting this algicidal bacterium may be potentially useful for reducing the number of harmful Microcystis aeruginosa blooms.