Photo-transformation of graphene oxide in the presence of co-existing metal ions regulated its toxicity to freshwater algae

The environmental effects of microplastics and microplastic derived dissolved organic matter in aquatic environments: A review

Currently, microplastics (MPs) have ubiquitously distributed in different aquatic environments. Due to the unique physicochemical properties, MPs exhibit a variety of environmental effects with the coexisted contaminants. MPs can not only alter the migration of contaminants via vector effect, but also affect the transformation process and fate of contaminants via environmental persistent free radicals (EPFRs). The aging processes may enhance the interaction between MPs and co-existed contaminants. Thus, it is of great significance to review the aging mechanism of MPs and the influence of coexisted substances, the formation mechanism of EPFRs, environmental effects of MPs and relevant mechanism. Moreover, microplastic-derived dissolved organic matter (MP-DOM) may also influence the elemental biogeochemical cycles and the relevant environmental processes. However, the environmental implications of MP-DOM are rarely outlined. Finally, the knowledge gaps on environmental effects of MPs were proposed.

Interactions of monolayer molybdenum disulfide sheets with metalloid antimony in aquatic environment: Adsorption, transformation, and joint toxicity

The tremendous application potentiality of transitional metal dichalcogenides (TMDs), such as molybdenum disulfide (MoS2) nanosheets, will unavoidably lead to increasing release into the environment, which could influence the fate and toxicity of co-existed contaminants. The present study discovered that 59.8 % of trivalent antimony [Sb(III)] was transformed by MoS2 to pentavalent Sb [Sb(V)] in aqueous solutions under light illumination, which was due to hole oxidation on the nanosheet surfaces. A synergistic toxicity between MoS2 and Sb(III, V) to algae (Chlorella vulgaris) was observed, as demonstrated by the lower median-effect concentrations of MoS2 + Sb(III)/Sb(V) (13.1 and 20.9 mg/L, respectively) than Sb(III)/Sb(V) (38.8 and 92.5 mg/L, respectively) alone. Particularly, MoS2 at noncytotoxic doses notably increased the bioaccumulation of Sb(III, V) in algae, causing aggravated oxidative damage, photosynthetic inhibition, and structural alterations. Metabolomics indicated that oxidative stress and membrane permeabilization were primarily associated with down-regulated amino acids involved in glutathione biosynthesis and unsaturated fatty acids. MoS2 co-exposure remarkably decreased the levels of thiol antidotes (glutathione and phytochelatins) and aggravated the inhibition on energy metabolism and ATP synthesis, compromising the Sb(III, V) detoxification and efflux. Additionally, extracellular P was captured by the nanosheets, also contributing to the uptake of Sb(V). Our findings emphasized the nonignorability of TMDs even at environmental levels in affecting the ecological hazard of metalloids, providing insight into comprehensive safety assessment of TMDs.

Size-dependent photocatalytic inactivation of Microcystis aeruginosa and degradation of microcystin by a copper metal organic framework

Water eutrophication has led to increasingly serious algal blooms (HABs) that pose significant threats to aquatic environmental and human health. Differently sized copper metal organic frameworks (Cu-MOFs), including Cu-MOF-1 (30 nm), Cu-MOF-2, (40 nm), Cu-MOF-3 (50 nm), and Cu-MOF-4 (1 µm×100 nm), were synthesized. Their performance in inactivating Microcystis aeruginosa and degrading microcystin was assessed at the concentration of 0-60 mg/L under visible light irradiation for 6 h. The photocatalytic antialgal activity of Cu-MOF-4 was 10.5%, 14.2%, and 31.2% higher than that of Cu-MOF-3, Cu-MOF-2, and Cu-MOF-1; the efficacy in photocatalytic degradation of microcystin induced by Cu-MOFs also exhibited significant size-dependent efficiency, where Cu-MOF-4 was 2.6-, 1.8-, and 2.0-fold of Cu-MOF-3, Cu-MOF-2, and Cu-MOF-1, respectively. Cu-MOF-4 had greater performance than other Cu-MOFs could attributed to: 1) Cu-MOF-4 is easier to interact with algal cells due to its lower surface negative charge and higher hydrophobicity, resulting in more photocatalyst-algae heteroaggregates formation; 2) Cu-MOF-4 had greater electron-hole pairs separation ability, thus exhibiting higher reactive oxygen species (ROS) production; 3) Cu-MOF-4 had greater hydrostability than other Cu-MOFs, leading to more sustained ROS generation. Additionally, the reusability of Cu-MOF-4 was also greater than other Cu-MOFs.

Maternal exposure to sunlight-irradiated graphene oxide induces neurodegeneration-like symptoms in zebrafish offspring through intergenerational translocation and genomic DNA methylation alterations

The physiochemical properties of graphene oxide may be affected by sunlight irradiation. However, the underlying mechanisms that alter the properties and subsequent intergenerational effects are not sufficiently investigate. Epigenetics is an early sensitive marker for the intergenerational effects of nanomaterial exposure due to the epigenetic memory. In this study, we investigate changes in the physicochemical properties and the intergenerational effects of maternal exposure to simulated sunlight-irradiated polyethyleneimine-functionalized graphene oxide (SL-PEI-GO). Results show that the physicochemical properties of polyethyleneimine-functionalized graphene oxide (PEI-GO) can be altered significantly by the oxidation of carbon atoms with unpaired electrons present in the defects and on the edges of PEI-GO by sunlight. First, the positive charges, sharp edges, defects and disordered structures of SL-PEI-GO make it translocate from maternal zebrafish to offspring, thus catalyzing the production of reactive oxygen species and damaging mitochondria directly. In addition, changes in DNA methylation reduce the expression of protocadherin1a, protocadherin19 and cadherin4, thus destroying cell membrane integrity, cell adhesion and Ca2+ binding. The alteration of DNA methylation induced by maternal exposure activates the Ca2+-CaMKK-brsk2a pathway, which catalyzes the phosphorylation of Tau and eventually results in the appearance of neurodegeneration-like symptoms, including the loss of neurons and neurobehavioral disorders. This study demonstrates that maternal exposure to SL-PEI-GO induces clear neurodegeneration-like symptoms in offspring through both the intergenerational translocation of nanomaterials and differential DNA methylation. These findings may provide new insights into the health risks of nanomaterials altered by nature conditions.

Physicochemical properties of nanosized biochar regulated by heat treatment temperature dictates algal responses: From the perspective of fatty acid metabolism

Nanosized biochar (NBC) is an important fraction of biochar (BC) as it can exert nano-scale effects on aquatic organisms, attracting increasing research attention. However, effects of different physicochemical properties of NBC on biological responses at the metabolic and gene expression level are not comprehensively understood. Here, biological effects of NBCs pyrolyzed at different heat treatment temperatures (HTTs, 350-700 °C) were evaluated using freshwater algae Chlorella vulgaris, from the perspectives of growth and fatty acid (FA) profile changes. NBC pyrolyzed at 700 °C (N700) induced the greatest algal growth inhibition and oxidative stress than N350 and N500. In addition, NBC exposure to 50 mg/L increased saturated and monounsaturated FAs, along with a decrease in polyunsaturated FAs (PUFAs). Exposure to NBC also significantly influenced the expression of key FA metabolism genes (3fad, sad, kasi and accd), demonstrating the potential role of reactive oxygen species-mediated PUFA reduction accompanied by increased membrane permeability in algal toxicity upon NBC exposure. The observed differences in response to N700 were attributed to its smaller particle size and higher abundance of -COOH. These findings reveal the underlying mechanisms in the algal response to NBCs and provide valuable guidance for the safe design and application of BC materials.

Integrating FTIR 2D correlation analyses, regular and omics analyses studies on the interaction and algal toxicity mechanisms between graphene oxide and cadmium

Graphene oxide (GO, a popular 2D graphene-based nanomaterial) has developed quickly and has received considerable attention for its applications in environmental protection and pollutant removal. However, significant knowledge gaps still exist about the interaction characteristic and joint toxicity mechanism of GO and cadmium (Cd) on aquatic organisms. In this study, GO showed a high adsorption capacity (120. 6 mg/g) and strong adsorption affinity (K_L = 0.85 L/mg) for Cd²⁺. Integrating multiple analytical methods (e.g., electron microscopy, Raman spectra, and 2D correlation spectroscopy) revealed that Cd²⁺ is uniformly adsorbed on the GO surface and edge mainly through cation-π interactions. The combined ecological effects of GO and Cd²⁺ on Chlorella vulgaris were observed. Cd²⁺ induced more severe growth inhibition, photosynthesis toxicity, ultrastructure damage and plasmolysis than GO. Interestingly, we found that GO nanosheets could augment the algal toxicity of Cd²⁺ (e.g., chlorophyll b, mitochondrial membrane damage, and uptake). Transcriptomics and metabolomics further explained the underlying mechanism. The results indicated that the regulation of PSI-, PSII-, and metal transport-related genes (e.g., ABCG37 and ZIP4) and the inhibition of metabolic pathways (e.g., amino acid, fatty acid, and carbohydrate metabolism) were responsible for the persistent phytotoxicity. The present work provides mechanistic insights into the roles of coexisting inorganic pollutants on the environmental fate and risk of GO in aquatic ecosystems.

Applicability of OECD TG 201, 202, 203 for the aquatic toxicity testing and assessment of 2D Graphene material nanoforms to meet regulatory needs

Tests using algae and/or cyanobacteria, invertebrates (crustaceans) and fish form the basic elements of an ecotoxicological assessment in a number of regulations, in particular for classification of a substance as hazardous or not to the aquatic environment according to the Globally Harmonised System of Classification and Labelling of Chemicals (GHS-CLP) (GHS, 2022) and the REACH regulation (Registration, Evaluation, Authorisation and Restriction of Chemicals, EC, 2006). Standardised test guidelines (TGs) of the Organisation for Economic Co-operation and Development (OECD) are available to address the regulatory relevant endpoints of growth inhibition in algae and cyanobacteria (TG 201), acute toxicity to invertebrates (TG 202), and acute toxicity in fish (TG 203). Applying these existing OECD TGs for testing two dimensional (2D) graphene nanoforms may require more attention, additional considerations and/or adaptations of the protocols, because graphene materials are often problematic to test due to their unique attributes. In this review a critical analysis of all existing studies and approaches to testing used has been performed in order to comment on the current state of the science on testing and the overall ecotoxicity of 2D graphene materials. Focusing on the specific tests and available guidance's, a complete evaluation of aquatic toxicity testing for hazard classification of 2D graphene materials, as well as the use of alternative tests in an integrated approach to testing and assessment, has been made. This information is essential to ensure future assessments generate meaningful data that will fulfil regulatory requirements for the safe use of this "wonder" material.

Trends and prospects in graphene and its derivatives toxicity research: A bibliometric analysis

The purpose of this paper is to explore the current research status, hot topics, and future prospects in the field of graphene and its derivatives toxicity. In the article, the Web of Science Core Collection database was used as the data source, and the CiteSpace and VOSviewer were used to conduct a visual analysis of the last 10 years of research on graphene and its derivatives toxicity. A total of 8573 articles were included, and we analyzed the literature characteristics of the research results in the field of graphene and its derivatives toxicity, as well as the distribution of authors and co-cited authors; the distribution of countries and institutions; the situation of co-cited references; and the distribution of journals and categories. The most prolific countries, institutions, journals, and authors are China, the Chinese Academy of Sciences, RSC Advances, and Wang, Dayong, respectively. The co-cited author with the most citations was Akhavan, Omid. The five research hotspot keywords in the field of graphene and its derivatives toxicity were "nanomaterials," "exposure," "biocompatibility," "adsorption," and "detection." Frontier topics were "facile synthesis," "antibacterial activity," and "carbon dots." Our study provides perspectives for the study of graphene and its derivatives toxicity and yields valuable information and suggestions for the development of graphene and its derivatives toxicity research in the future.

Interaction between graphene oxide and acetaminophen in water under simulated sunlight: Implications for environmental photochemistry of PPCPs

In recent years, graphene oxide (GO) as a new carbon material has been widely investigated as adsorbent and catalyst. However, effects of GO on the micro-pollutants such as pharmaceuticals and personal care products (PPCPs) under sunlight remains unclear. In this study, the degradation of PPCPs in a simulated sunlight-GO photocatalytic system was systematically investigated. Specifically, GO rapidly degrade 95% of acetaminophen (APAP) within 10 min under simulated sunlight irradiation (λ ≥ 350 nm). The influencing factors such as APAP concentration, pH, GO dosage, water matrixes (Cl^-, NO₃^-, HCO₃^-, SO₄^2-, Ca²⁺, Fe³⁺and fulvic acid) were investigated. At a GO dosage of 100 mg L^-1 and an initial pH of 7, the APAP (5 μM) photodegradation kinetic constant k_obs was calculated to be 0.4547 min^-1. In practical applications, the GO photocatalysis system still degrade over 90% APAP within 60 min in real surface water. The electron spin resonance and radical scavenging experiments revealed that the dominated active species for degrading APAP was photogenerated holes (h⁺), while other mechanisms (¹O₂ and O₂^•-/HO₂^•) played a minor role. Furthermore, the photochemical transformation of some other typical PPCPs were comparatively studied to reveal the relationship between degradation kinetics and molecular structure. Based on descriptive variables including molar refractive index parameter, octanol-water partition coefficient, dissociation constant and dipole moment, a quantitative structural-activity relationship (QSAR) model for predicting pseudo-first-order rate constants was established with a high significance (R² = 0.996, p < 0.05). This study helps to understand the interaction between GO and PPCPs and its effects on the photochemical transformation of PPCPs in water.

Impact of sulfhydryl ligands on the transformation of silver ions by molybdenum disulfide and their combined toxicity to freshwater algae

The transformation of silver ions (Ag⁺) mediated by engineered nanomaterials (ENMs) influences the biosafety of Ag-containing products in natural environments. Actually, modification of biomolecules to ENMs in aquatic ecosystems alters their interactions with Ag⁺. This study discovered that surface functionalization of glutathione (GSH, a sulfhydryl compound ubiquitous in natural waters) on molybdenum disulfide (MoS₂) nanoflakes suppressed the redox reaction between 1 T components and Ag⁺, inhibiting the MoS₂-mediated reduction of Ag⁺ to Ag nanoparticles (AgNPs) in aqueous phase in the dark. However, AgNPs formation (from 2.32 ± 0.35-3.25 ± 0.29 mg/L per day, pH 7.0) and oxidation of MoS₂ were remarkably accelerated after GSH binding under light conditions. The dominant electron donator of MoS₂ to Ag⁺ was transformed from the electron-hole pairs to surface ligands driven by the introduction of chromophoric groups was authenticated as the cause for the elevated Ag⁺ reduction. These processes also occurred between Ag⁺ and MoS₂ at low levels (50 μg/L). Additionally, the joint algal toxicity of GSH-modified MoS₂ with Ag⁺ was weaker than that of pristine MoS₂ due to increased retention of free Ag⁺ and AgNPs formation. Our findings improve the understanding of the interaction between ENMs and Ag⁺ in aquatic ecosystems.

Advances in Biologically Applicable Graphene-Based 2D Nanomaterials

Climate change and increasing contamination of the environment, due to anthropogenic activities, are accompanied with a growing negative impact on human life. Nowadays, humanity is threatened by the increasing incidence of difficult-to-treat cancer and various infectious diseases caused by resistant pathogens, but, on the other hand, ensuring sufficient safe food for balanced human nutrition is threatened by a growing infestation of agriculturally important plants, by various pathogens or by the deteriorating condition of agricultural land. One way to deal with all these undesirable facts is to try to develop technologies and sophisticated materials that could help overcome these negative effects/gloomy prospects. One possibility is to try to use nanotechnology and, within this broad field, to focus also on the study of two-dimensional carbon-based nanomaterials, which have excellent prospects to be used in various economic sectors. In this brief up-to-date overview, attention is paid to recent applications of graphene-based nanomaterials, i.e., graphene, graphene quantum dots, graphene oxide, graphene oxide quantum dots, and reduced graphene oxide. These materials and their various modifications and combinations with other compounds are discussed, regarding their biomedical and agro-ecological applications, i.e., as materials investigated for their antineoplastic and anti-invasive effects, for their effects against various plant pathogens, and as carriers of bioactive agents (drugs, pesticides, fertilizers) as well as materials suitable to be used in theranostics. The negative effects of graphene-based nanomaterials on living organisms, including their mode of action, are analyzed as well.

Impacts of photoaging on the interactions between graphene oxide and proteins: Mechanisms and biological effect

Graphene oxide (GO) are subjected to photoaging in aquatic environment, and inevitably enter biota and then interact with proteins. Here, the interactions of pristine and photoaged GO with two typical proteins (bovine serum albumin (BSA) and lysozyme) were systematically investigated. Due to long term photoirradiation (1-3 day), the lateral size of GO decreased greatly, and the oxygen-containing groups decreased as well while the graphitic carbon contents increased. Compared to pristine GO, the photoaged GO displayed stronger binding affinities with both proteins, which was mainly attributed to the increased binding sites as a result of smaller lateral size and increased hydrophobicity. The photoaging effect was more obvious for the negatively charged BSA, because hydrogen bonding and van der Waals force were mainly involved in the enthalpy-driven interactions between them. While, the strong electrostatic attraction between the positively charged lysozyme and GO diminished the photoaging effect. Analyses of synchronous, three-dimensional fluorescence spectra and fibrillation experiments intensified that the photoaged GO induced more serious changes in conformational structure of BSA and exhibited stronger inhibition on fibrillation of BSA compared to pristine GO. This study provided novel insights into the increased ecological risks of GO as a result of photoaging.

Behavior of two classes of organic contaminants in the presence of graphene oxide: Ecotoxicity, physicochemical characterization and theoretical calculations

Graphene oxide (GO) production has increased considerably and therefore its presence in the environment is inevitable. When in aquatic environment GO can interact with co-existing compounds, modifying their toxicities for several organisms. However, the toxic effects of co-exposure of GO and organic compounds are rarely reported in the literature. Herein, we studied the behavior of four organic aquatic contaminants found in surface water such as 2-phenylbenzotriazoles (non-Cl PBTA-9 and PBTA-9) and phenoxyphenyl pesticides, pyriproxyfen (PYR) and lambdacyhalothrin (LCT), in the presence of GO. GO reduced 90% and 83% of the toxicity of non-Cl PBTA-9 and PBTA for Daphnia. When PBTAs were adsorbed onto GO surface their interactions caused GO agglomeration (up to 20 mm) and consequent precipitation, making PBTAs less bioavailable. PYR and LCT's toxicities increased up to 83% for PYR and 47% for LCT in the presence of GO, because their adsorption on GO lead to the stabilization of the suspensions (up to 0.5 μm). Those particles were then easily ingested and retained in the digestive tract of the daphnids, triggering the Trojan horse effect. Based on theoretical calculations we observed that PBTA compounds are planar, electron-poorer and more reactive than the studied pesticides, suggesting a better stability of the GO/PBTA complexes. PYR and LCT are nonplanar, electron-richer and less reactive towards GO than PBTAs, forming less stable GO complexes that could facilitate the desorption of pesticides, increasing toxic effects. Our results suggest that the properties of the organic toxicants can influence the stability of graphene oxide suspensions, playing a fundamental role in the modulation of their toxicity. Further research is needed for a deep understanding of the behavior of nanomaterials in the presence of contaminants and their effect in the toxicity of aquatic organisms.

New insights on metal ions accelerating the aging behavior of polystyrene microplastics: Effects of different excess reactive oxygen species

Microplastics (MPs) will coexist with various pollutants in the environment, but it is not clear whether these pollutants will affect the aging process of MPs. The aging process of polystyrene microplastics (PS-MPs) mediated by Cu²⁺ and Pb²⁺ was investigated in this study. The results showed that the aging rate of PS-MPs mediated by Cu²⁺ and Pb²⁺ were significantly higher than that of ultrapure water (After 7 days of light irradiation, the CI values of aging PS-MPs mediated by ultrapure water, Cu²⁺ and Pb²⁺ increased from 0.030 of original PS-MPs to 0.034, 0.048 and 0.086 respectively). This process may be related to the generation of a large amount of reactive oxygen species, because OH were detected in PS-MPs suspension mediated by Cu²⁺, which were significantly higher than those in ultrapure water, while ¹O₂ mediated by Pb²⁺ were more. However, these photo-aging effects were significantly inhibited by reactive oxygen species (ROS) quencher, which indicated that excessive ROS production was the main reason for metal ions to promote the photo-aging of PS-MPs. In addition, this study reported that excessive ROS will accelerate the formation of carbonyl group on the surface of PS-MPs, and lead to the change of physical and chemical properties of PS-MPs. This study provides new insights for the environmental behavior of MPs under the condition of combined pollution.

Graphene-derived antibacterial nanocomposites for water disinfection: Current and future perspectives

Antimicrobial nanomaterials provide numerous opportunities for the synthesis of next-generation sustainable water disinfectants. Using the keywords graphene and water disinfection and graphene antibacterial activity, a detailed search of the Scopus database yielded 198 and 1433 studies on using graphene for water disinfection applications and graphene antibacterial activity in the last ten years, respectively. Graphene family nanomaterials (GFNs) have emerged as effective antibacterial agents. The current innovations in graphene-, graphene oxide (GO)-, reduced graphene oxide (rGO)-, and graphene quantum dot (GQD)-based nanocomposites for water disinfection, including their functionalization with semiconductor photocatalysts and metal and metal oxide nanoparticles, have been thoroughly discussed in this review. Furthermore, their novel application in the fabrication of 3D porous hydrogels, thin films, and membranes has been emphasized. The physicochemical and structural properties affecting their antibacterial efficiency, such as sheet size, layer number, shape, edges, smoothness/roughness, arrangement mode, aggregation, dispersibility, and surface functionalization have been highlighted. The various mechanisms involved in GFN antibacterial action have been reviewed, including the mechanisms of membrane stress, ROS-dependent and -independent oxidative stress, cell wrapping/trapping, charge transfer, and interaction with cellular components. For safe applications, the potential biosafety and biocompatibility of GFNs in aquatic environments are emphasized. Finally, the current limitations and future perspectives are discussed. This review may provide ideas for developing efficient and practical solutions using graphene-, GO-, rGO-, and GQD-based nanocomposites in water disinfection by rationally employing their unique properties.

Di-functional Cu2+-doped BiOCl photocatalyst for degradation of organic pollutant and inhibition of cyanobacterial growth

Photocatalytic oxidation of contaminants in water has recently gained extensive attentions. In this study, Cu²⁺-doped BiOCl microsphere photocatalysts were prepared using solvothermal method. The effects of Cu²⁺ doping ratio on the morphological structures and photoelectric and photocatalytic properties of BiOCl were studied in detail. Results showed that Cu²⁺ doping affected the particle size of BiOCl microspheres. The introduction of Cu²⁺ ions gradually increased the light absorption range and decreased the electron recombination rate of photocatalysts as shown by ultraviolet-visible diffuse reflection and photoluminescence spectra. The best doping ratio was 0.25 Cu²⁺-BiOCl, showing the highest photocatalytic activity for rhodamine B (14.25 time higher than BiOCl) and a good inhibition of algal growth. The main reactants in the photocatalytic system were·OH and h⁺ (electron holes). Density functional theory (DFT) calculations further demonstrated that the doping of Cu²⁺ ions made the photogenerated carriers in BiOCl easier to generate and ensured the charge was transferred more rapidly. In conclusion, a novel high-efficiency multifunctional photocatalyst is proposed for the efficient organic pollutants removal and algae growth inhibition from water.

Graphene oxide toxicity in W1118 flies

The risk of graphene oxide (GO) exposure to various species has been greatly amplified in recent years due to its booming production and applications in various fields. However, a deep understanding of the GO biosafety lags its wide applications. Herein, we used W¹¹¹⁸ flies as a model organism to study GO toxicity at relatively low concentrations. We found that GO exposure led to remarkable weight loss, delayed development, retarded motion, and shortened lifespan of these flies. On the other hand, the GO influence on their sex ratio and the total number of pupae and adults were insignificant. The toxicological effect of GO was shown to be related to its serious compromise of the nutrient absorption in flies due to the severe damages in midguts. These damages were then attributed to the excessive accumulation of reactive oxygen species (ROS), which triggers the oxidative stress. These findings reveal the underlying mechanisms of GO biotoxicities in fruit flies, which might provide a useful reference to assess the risks of these newly invented nanomaterials likely never encountered by various species before.

Study on the Combined Toxicities and Quantitative Characterization of Toxicity Sensitivities of Three Flavor Chemicals and Their Mixtures to Caenorhabditis elegans

It was shown that flavor chemicals with high toxicity sensitivities mean that small changes in their effective concentrations can lead to significant changes in toxicity. Flavors are widely used in personal care products. However, our study demonstrated that some flavor chemicals and their mixture rays have high toxicity sensitivities to Caenorhabditis elegans (C. elegans), which may have an impact on human health. In this paper, three flavor chemicals (benzyl alcohol, phenethyl alcohol, and cinnamaldehyde) were used as components of the mixture, and three binary mixture systems were constructed, respectively. Five mixture rays were designed for each mixture system by a direct equipartition ray design method. The lethal toxicities of the three flavor chemicals and mixture rays to C. elegans at three exposure volumes were determined. A new concept (inverse of the negative logarithmic concentration span (iSPAN)) was introduced to quantitatively evaluate the toxicity sensitivity of chemicals or mixture rays, and the combination index (CI) was employed to identify the toxicological interactions in the mixtures. It was shown that the three flavor chemicals as well as the binary mixture rays have a significant concentration-response relationship on the lethality of C. elegans. The iSPAN values of the three flavor chemicals and their mixture rays were larger than 3.000, showing very strong toxicity sensitivity to C. elegans. In mixture systems, the toxicity sensitivities of mixture rays with different mixture ratios were also different at different exposure volumes. In addition, it can be seen from the CI heat map that the toxicological interaction not only shows the mixture ratio dependence but also changes with the different exposure volumes, which implies that the mixtures consisting of flavor chemicals with high toxicity sensitivity have complex toxicological interactions. Therefore, in environmental risk assessment, special attention should be paid to chemicals with high toxicity sensitivities.

Aquatic Mesocosm Strategies for the Environmental Fate and Risk Assessment of Engineered Nanomaterials

In the past decade, mesocosms have emerged as a useful tool for the environmental study of engineered nanomaterials (ENMs) as they can mimic the relevant exposure scenario of contamination. Herein, we analyzed the scientific outcomes of aquatic mesocosm experiments, with regard to their designs, the ENMs tested, and the end points investigated. Several mesocosm designs were consistently applied in the past decade to virtually mimic various contamination scenarios with regard to ecosystem setting as well as ENMs class, dose, and dosing. Statistical analyses were carried out with the literature data to identify the main parameters driving ENM distribution in the mesocosms and the potential risk posed to benthic and planktonic communities as well as global ecosystem responses. These analyses showed that at the end of the exposure, mesocosm size (water volume), experiment duration, and location indoor/outdoor had major roles in defining the ENMs/metal partitioning. Moreover, a higher exposure of the benthic communities is often observed but did not necessarily translate to a higher risk due to the lower hazard posed by transformed ENMs in the sediments (e.g., aggregated, sulfidized). However, planktonic organisms were generally exposed to lower concentrations of potentially more reactive and toxic ENM species. Hence, mesocosms can be complementary tools to existing standard operational procedures for regulatory purposes and environmental fate and risk assessment of ENMs. To date, the research was markedly unbalanced toward the investigation of metal-based ENMs compared to metalloid- and carbon-based ENMs but also nanoenabled products. Future studies are expected to fill this gap, with special regard to high production volume and potentially hazardous ENMs. Finally, to take full advantage of mesocosms, future studies must be carefully planned to incorporate interdisciplinary approaches and ensure that the large data sets produced are fully exploited.

Phototransformation of Graphene Oxide on the Removal of Sulfamethazine in a Water Environment

Graphene oxide (GO) is widely used in various fields and has raised concerns regarding its potential environmental fate and effect. However, there are few studies on its influence on coexisting pollutants. In this study, the phototransformation of GO and coexisting sulfamethazine (SMZ) under UV irradiation was investigated, with a focus on the role of reactive oxygen species. The results demonstrated that GO promoted the degradation of SMZ under UV irradiation. The higher the concentration of GO, the higher the degradation rate of SMZ, and the faster the first-order reaction rate. Two main radicals, ∙OH and ¹O₂, both contributed greatly in terms of regulating the removal of SMZ. Cl⁻, SO₄²⁻, and pH mainly promoted SMZ degradation by increasing the generation of ∙OH, while humic acid inhibited SMZ degradation due to the reduction of ∙OH. Moreover, after UV illumination, the GO suspension changed from light yellow to dark brown with increasing absorbance at a wavelength of 225 nm. Raman spectra revealed that the I_D/I_G ratio slightly decreased, indicating that some of the functional groups on the surface of GO were removed under low-intensity UV illumination. This study revealed that GO plays important roles in the photochemical transformation of environmental pollutants, which is helpful for understanding the environmental behaviors and risks of nanoparticles in aquatic environments.

Photoinduced transformation of silver ion by molybdenum disulfide nanoflakes at environmentally relevant concentrations attenuates its toxicity to freshwater algae

The transformation of Ag⁺ is strongly correlated with its risks in aquatic environment. Considering the wide application of molybdenum disulfide (MoS₂) and the inevitable release into the environment, the effects of MoS₂ on Ag⁺ transformation and toxicity are of great concerns. This study revealed the pH-dependent reduction of Ag⁺ (0.5 mM) to Ag nanoparticles (AgNPs) by MoS₂ (50 mg/L) and solar irradiation obviously accelerates the AgNPs formation (2.638 mg/L per day, pH=7.0) compared with dark condition (0.637 mg/L per day), ascribing to the electrons capture from electron-hole pairs of MoS₂ by Ag⁺. Ionic strengths and natural organic matter decreased the AgNPs yield. Metallic 1 T phase of MoS₂ primarily participated in AgNPs formation and was oxidized to soluble ions (MoO₄^2-) due to the oxygen generation in valance band. The above processes also occurred between Ag⁺ and MoS₂ at environmentally relevant concentrations. Further, photoinduced transformation of Ag⁺ by MoS₂ (10-100 μg/L) significantly lowered its toxicity to freshwater algae. The AgNPs formation on MoS₂ reduced the bioavailability of Ag⁺ to algae, which was the mechanism for attenuated Ag⁺ toxicity. The provided data are helpful for better understanding the roles of MoS₂ on the environmental fates and risks of metal ions under natural conditions.

Accumulation, transformation and subcellular distribution of arsenite associated with five carbon nanomaterials in freshwater zebrafish specific-tissues

Although carbon nanomaterials (CNMs) commonly exist throughout the aquatic environment, their effect on arsenic (As) distribution and toxicity is unclear. In this study, arsenite accumulation, transformation, subcellular distribution, and enzyme activity were assessed in adult zebrafish (Danio rerio) intestines, heads and muscles, following co-exposure to arsenite and CNMs with different structures (single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNTs), fullerene (C₆₀), graphene oxide (GO), and graphene (GN)). Results show that GN and GO promoted As toxicity in D. rerio, as carriers increasing total As accumulation in the intestine, resulting in arsenite adsorbed by GO and GN being released and transformed mainly into moderately-toxic monomethylarsonic acid (MMA), which was mostly distributed in organelles and metallothionein-like proteins (MTLPs). Moreover, GO and GN influenced As species distribution in D. rerio due to the excellent electron transfer ability. However, the effect was marginal for SWCNT, MWCNT and C₆₀, because of the different structure and suspension stability in fish-culture water. In addition, in the muscle and head tissues, As was mainly distributed in cellular debris in the forms of dimethylarsinic acid (DMA) and arsenobetaine (AsB). These findings help better understand the influence of CNMs on the mechanism of As toxicity in natural aquatic environments.

New insights into the colloidal stability of graphene oxide in aquatic environment: Interplays of photoaging and proteins

Wide application leads to release of graphene oxide (GO) in aquatic environment, where it is subjected to photoaging and changes in physicochemical properties. As important component of natural organic matters, proteins may greatly affect the aggregation behaviors of photoaged GO. The effects of a typical model protein (bovine serum albumin, BSA) on the colloidal stability of photoaged GO were firstly investigated. Photoaging reduced the lateral size and oxygen-containing groups of GO, while the graphene domains and hydrophobicity increased as a function of irradiation time (0-24 h). Consequently, the photoaged GO became less stable than the pristine one in electrolyte solutions. Adsorption of BSA on the surface of the photoaged GO decreased as well, leading to thinner BSA coating on the photoaged GO. In the solutions with low concentrations of electrolytes, the aggregation rate constants (k) of all the photoaged GO firstly increased to the maximum agglomeration rate constants (k_fast, regime I), maintained at k_fast (regime Ⅱ) and then decreased to zero (regime Ⅲ) as the BSA concentration increased. In both regime I and III, the photoaged GO were less stable at the same BSA concentrations, and the impacts of BSA on the colloidal stability of the photoaged GO were less than the pristine one, which was attributed to the weaker interactions between the photoaged GO and BSA. This study provided new insights into the colloidal stability and fate of GO nanomaterials, which are subjected to extensive light irradiation, in wastewater and protein-rich aquatic environment.

Environmental transformation of graphene oxide in the aquatic environment

In recent years, research on graphene oxide (GO) has developed rapidly in both academic and industrial applications such as electronic, biosensor, drug delivery, water treatment and so forth. Based on the large amount of applications, it is anticipated that GO will inevitably find its own way to the environment, if used are not restricted to prevent their release. Environmental transformation is an important transformation process in the natural environment. In this review, we will summarize the recent developments on environmental transformation of GO in the aquatic environment. Although papers on environmental transformation of graphene-based nanomaterials can be found, a systematic picture describing photo-transformation of GO (dividing into different irradiation sources), environmental transformation of GO in the dark environmental, the environmental toxicity of GO are still lacking. Thus, it is essential to summarize how different light sources will affect the GO structure and reactive oxygen species generation in the photo-transformation process, how GO will react with various natural constituents in the aquatic environment, whether GO will toxic to different aquatic organisms and what will be the interactions between GO and the intracellular receptors in the intracellular level once GO released into the aquatic environment. This review will arouse the realization of potential risk that GO can bring to the aquatic environment and enlighten us to pay attention to behaviors of other two-dimensional GO-like nanomaterials, which have been intensively applied and studied in recent years.

Combined Toxicity of TiO2 Nanospherical Particles and TiO2 Nanotubes to Two Microalgae with Different Morphology

The joint activity of multiple engineered nanoparticles (ENPs) has attracted much attention in recent years. Many previous studies have focused on the combined toxicity of different ENPs with nanostructures of the same dimension. However, the mixture toxicity of multiple ENPs with different dimensions is much less understood. Herein, we investigated the toxicity of the binary mixture of TiO₂ nanospherical particles (NPs) and TiO₂ nanotubes (NTs) to two freshwater algae with different morphology, namely, Scenedesmus obliquus and Chlorella pyrenoidosa. The physicochemical properties, dispersion stability, and the generation of reactive oxygen species (ROS) were determined in the single and binary systems. Classical approaches to assessing mixture toxicity were applied to evaluate and predict the toxicity of the binary mixtures. The results show that the combined toxicity of TiO₂ NPs and NTs to S. obliquus was between the single toxicity of TiO₂ NTs and NPs, while the combined toxicity to C. pyrenoidosa was higher than their single toxicity. Moreover, the toxicity of the binary mixtures to C. pyrenoidosa was higher than that to S. obliquus. A toxic unit assessment showed that the effects of TiO₂ NPs and NTs were additive to the algae. The combined toxicity to S. obliquus and C. pyrenoidosa can be effectively predicted by the concentration addition model and the independent action model, respectively. The mechanism of the toxicity caused by the binary mixtures of TiO₂ NPs and NTs may be associated with the dispersion stability of the nanoparticles in aquatic media and the ROS-induced oxidative stress effects. Our results may offer a new insight into evaluating and predicting the combined toxicological effects of ENPs with different dimensions and of probing the mechanisms involved in their joint toxicity.

The Crucial Role of Environmental Coronas in Determining the Biological Effects of Engineered Nanomaterials

In aquatic environments, a large number of ecological macromolecules (e.g., natural organic matter (NOM), extracellular polymeric substances (EPS), and proteins) can adsorb onto the surface of engineered nanomaterials (ENMs) to form a unique environmental corona. The presence of environmental corona as an eco-nano interface can significantly alter the bioavailability, biocompatibility, and toxicity of pristine ENMs to aquatic organisms. However, as an emerging field, research on the impact of the environmental corona on the fate and behavior of ENMs in aquatic environments is still in its infancy. To promote a deeper understanding of its importance in driving or moderating ENM toxicity, this study systemically recapitulates the literature of representative types of macromolecules that are adsorbed onto ENMs; these constitute the environmental corona, including NOM, EPS, proteins, and surfactants. Next, the ecotoxicological effects of environmental corona-coated ENMs on representative aquatic organisms at different trophic levels are discussed in comparison to pristine ENMs, based on the reported studies. According to this analysis, molecular mechanisms triggered by pristine and environmental corona-coated ENMs are compared, including membrane adhesion, membrane damage, cellular internalization, oxidative stress, immunotoxicity, genotoxicity, and reproductive toxicity. Finally, current knowledge gaps and challenges in this field are discussed from the ecotoxicology perspective.