Using Fe(II)/Fe(III) as catalyst to drive a novel anammox process with no need of anammox bacteria

Magnetite addition reduces nitrite requirement for efficient anaerobic ammonium oxidation by facilitating mutualism of ANAMMOX and FEAMMOX bacteria

Partial nitrification (PN) is crucial for anaerobic ammonium oxidation (ANAMMOX), but faces challenges such as high energy demands and process control. Recent research has highlighted additives like magnetite as potential alternatives to conventional electron acceptors (O₂ and NO₂-) for enhancing ammonium (NH4+) oxidation with lower energy consumption. This study investigated the effect of adding 50 mg/L of magnetite to ANAMMOX reactors, resulting in improved nitrogen (N) removal efficiency. The magnetite-added ANAMMOX (M-ANA) reactor yielded N removal efficiencies of 71 %, 66 %, and 57 % for NH4+:NO2- molar ratios of 1:1.3, 1:0.8, and 1:0.5, respectively. The M-ANA reactor operated under a 0.5 mol lower NO2- concentration achieved similar performance to the control ANAMMOX (C-ANA) reactor operated with a theoretical amount of NO2-. Moreover, the M-ANA reactor showed the potential to remove NH4+ by 56 % without any NO2- supplementation. Metagenomic analysis showed that the addition of magnetite significantly improved the relative abundance of microorganisms involved in the FEAMMOX reaction, such as Fimbriimonas ginsengisoli and Pseudomonas stutzeri. It also facilitated positive mutualism between ANAMMOX and FEAMMOX reactions. In addition, M-ANA granules exhibited a dense and compact structure compared with C-ANA, and the presence of magnetite facilitated the formation of resilient granules. Notably, the useful protein (Heme C) concentration and specific microbial activity in the M-ANA reactor were 1.3 and 2.2 times higher than those in the C-ANA reactor. Overall, the results demonstrate that an appropriate amount of magnetite can enhance the N removal efficiency while reducing the energy input requirements and associated carbon emissions. These findings can guide the future development of carbon- and energy-neutral N removal processes.

Iron-retrofitted anaerobic baffled reactor system for rural wastewater treatment: Stable performance of nutrients removal with phosphorus recovery and minimal sludge production

An iron-retrofitted anaerobic baffled reactor (ABR) system was developed for the effective treatment of rural wastewater with reduced maintenance demand and aeration costs. Average removal efficiencies of chemical oxygen demand, total nitrogen and total phosphorus of 99.4%, 62.7% and 92.6% were achieved respectively, when the ABR system was operating at steady state. With effective bioreduction of FeIII in the anaerobic chambers, phosphorus was immobilized in the sludge as vivianite, the sole phosphorus-carrying mineral. The FeIII in the recirculated sludge induced Feammox in the ABR reactor, contributing 14.8% to total nitrogen removal. Biophase separation and enrichment of microorganisms associated with iron and nitrogen transformations were observed in the system after Fe dosing, which enhanced the removal of pollutants. The coupling of Feammox and vivianite crystallization to remove nitrogen and phosphorus in an iron-retrofitted ABR would appear to be a promising technology for rural wastewater treatment.

Feasibility of simultaneous optimization of Anammox start-up and nitrogen removal performance by intermittent dosing of nanoscale zero-valent iron

The long acclimation period and sensitivity to environmental conditions of Anammox are the bottlenecks for its promotion and application. An innovative strategy was adopted to accelerate functional microbial enhancement and improve nitrogen removal performance by inoculating cryopreserved Anammox sludge and activated sludge with intermittent dosing of nanoscale zero-valent iron (nZVI). The acclimation time was shortened by 76 days with nitrogen removal efficiency (NRE) reaching up to 91.07 %. Anammox, NDFO (nitrate/nitrite-dependent Fe(II) oxidation), Feammox (Fe(III) reduction coupled with anaerobic ammonium oxidation) and abiotic reactions were coupled in the system with nZVI, contributing to 69.79 %, 15.14 %, 9.84 % and 0.25 % of nitrogen removal, respectively. Further microbial analysis demonstrated significant enrichment of functional microorganisms, such as Candidatus Jettenia, Acidovorax and Comamonas. High-efficient nitrogen removal was attribute to the increase of functional genes involved in Anammox, electronic transfer, heme C synthesis and iron metabolism. This work provides an inspiring idea for the mainstream Anammox application.

Ferroheme/Ferriheme Directly Involved in the Synthesis and Decomposition of Hydrazine as an Electron Carrier during Anammox

Anammox bacteria performed the reaction of NH4+ and NO with hydrazine synthase to produce N2H4, followed by the decomposition of N2H4 with hydrazine dehydrogenase to generate N2. Ferroheme/ferriheme, which serves as the active center of both hydrazine synthase and hydrazine dehydrogenase, is thought to play a crucial role in the synthesis and decomposition of N2H4 during Anammox due to its high redox activity. However, this has yet to be proven and the exact mechanisms by which ferroheme/ferriheme is involved in the Anammox process remain unclear. In this study, abiotic and biological assays confirmed that ferroheme participated in NH4+ and NO reactions to generate N2H4 and ferriheme, and the produced N2H4 reacted with ferriheme to generate N2 and ferroheme. In other words, the ferroheme/ferriheme cycle drove the continuous reaction between NH4+ and NO. Raman, ultraviolet-visible spectroscopy, and X-ray absorption fine structure spectroscopy confirmed that ferroheme/ferriheme is involved in the synthesis and decomposition of N2H4 via the core FeII/FeIII cycle. The mechanism of ferroheme/ferriheme participation in the synthesis and decomposition of N2H4 was proposed by density functional theory calculations. These findings revealed for the first time the heme electron transfer mechanisms, which are of great significance for deepening the understanding of Anammox.

New insights into nitrogen removal by divalent iron-enhanced moving bed biofilm reactor: Performance, interfacial interaction and co-occurrence network

A divalent iron-mediated moving bed biofilm reactor with intermittent aeration was developed to enhance the nitrogen removal at low carbon-to-nitrogen ratios. The study demonstrated thatammonia removal increased from 51 ± 4 % to 79 ± 4 % and nitrate removal increased from 72 ± 5 % to 98 ± 4 % in phases I-IV, and 2-5 mg·L-1 of divalent iron significantly increased the anoxic denitrification process. Divalent iron stimulated the secretion of extracellular polymeric substances, which facilitated the formation of cross-linked network between microbial cells. Furthermore, the cycle between divalent and trivalent iron decreased the energy barrier between the biofilm and the pollutant. The microbial community further revealed that Proteobacteria (relative abundance: 40-48 %) andBacteroidota(relative abundance: 31-37 %) were the dominant phyla, supporting the synchronous nitrification and denitrification processes as well as the lower accumulation of nitrite. In conclusion, iron redox cycling significantly enhanced the nitrogen removal. This study proposes a viable strategy for the efficient treatment of nutrient wastewater.

Microbially driven Fe-N cycle: Intrinsic mechanisms, enhancement, and perspectives

The iron‑nitrogen (FeN) cycle driven by microbes has great potential for treating wastewater. Fe is a metal that is frequently present in the environment and one of the crucial trace elements needed by microbes. Due to its synergistic role in the microbial N removal process, Fe goes much beyond the essential nutritional needs of microorganisms. Investigating the mechanisms behind the linked Fe-N cycle driven by microbes is crucial. The Fe-N cycle is frequently connected with anaerobic ammonia oxidation (anammox), nitrification, denitrification, dissimilatory nitrate reduction to ammonium (DNRA), Feammox, and simultaneous nitrification denitrification (SND), etc. Although the main mechanisms of Fe-mediated biological N removal may vary depending on the valence state of the Fe, their similar transformation pathways may provide information on the study of certain element-microbial interactions. This review offers a thorough analysis of the facilitation effect and influence of Fe on the removal of nitrogenous pollutants in various biological N removal processes and summarizes the ideal Fe dosing. Additionally, the synergistic mechanisms of Fe and microbial synergistic N removal process are elaborated, covering four aspects: enzyme activity, electron transfer, microbial extracellular polymeric substances (EPS) secretion, and microbial community interactions. The methods to improve biological N removal based on the intrinsic mechanism were also discussed, with the aim of thoroughly understanding the biological mechanisms of Fe in the microbial N removal process and providing a reference and thinking for employing Fe to promote microbial N removal in practical applications.

Mechanism of magnetite-assisted aerobic composting on the nitrogen cycle in pig manure

Magnetite affects nitrogen cycle of pig manure (PM) biostabilisation was investigated. Various doses of magnetite (0 % (T1); 2.5 % (T2); 5 % (T3); 7.5 % (T4)) were homogeneously added into PM and wolfberry branch fillings (BF) mixture for a 50-day composting. Compared to T1, total nitrogen (TN) loss in gaseous form increased remarkably by 17.51 %, 56.31 %, and 24.91 %, respectively, in T2-T4. In particular, T3 dramatically increased the cumulative N2O emission but decreased NH3 emissions. However, T2 and T3 enhanced the total nitrogen contents by 7.24 % and 3.09 %. Structural equation models (SEM) analysis indicated that magnetite addition increased the direct and indirect pathways of N2O emission. Further analysis revealed that Ruminofilibacter and N2O emission were significantly correlated, and Pseudomonas played a vital role in nitrogen preservation. Although using 2 % magnetite as an additive could increase the TN content, the obvious increase of N2O emission should be considered in engineering practice.

Zeolite enhanced iron-modified biocarrier drives Fe(II)/Fe(III) cycle to achieve nitrogen removal from eutrophic water

The problem of nitrogen removal in eutrophic water needs to be solved. Two new autotrophic nitrogen removal technologies, ammonia oxidation coupled with Fe(III) reduction (Feammox) and Nitrate-dependent Fe(II) oxidation (NDFO), have been shown to have the potential to treat eutrophic water. However, the continuous addition of iron sources not only costs more, but also leads to sludge mineralization. In this study, nano-sized iron powder was loaded on the surface of K3 filler as a solid iron source for the extracellular metabolism of iron-trophic bacteria. At the same time, due to the high selective adsorption of zeolite for ammonia can improve the low nitrogen metabolism rate caused by low nitrogen concentrations in eutrophic water, three kinds of modified functional biological carriers were prepared by mixing zeolite powder and iron powder in different proportions (Z1, Zeolite:iron = 1; Z2, Zeolite:iron = 2; Z3, Zeolite:iron = 3). Z3 exhibited the best performance, with removal efficiencies of 54.8% for total nitrogen during 70 days of cultivation. The chemical structure and state of iron compounds changed under microorganism activity. The ex-situ test detected high NDFO and Feammox activities, with values of 1.02 ± 0.23 and 0.16 ± 0.04 mgN/gVSS/h. The enrichment of NDFO bacteria (Gallionellaceae, 0.73%-1.43%-0.74%) and Feammox bacteria (Alicycliphilus, 1.51%-0.88%-2.30%) indicated that collaboration between various functional microorganisms led to autotrophic nitrogen removal. Hence, zeolite/iron-modified biocarrier could drive the Fe(II)/Fe(III) cycle to remove nitrogen autotrophically from eutrophic water without carbon and Fe resource addition.

Hydrogel bioreactor drives Feammox and synergistically removes composite pollutants: Performance optimization, microbial communities and functional genetic differences

Mixed pollutant wastewater has been a difficult problem due to the high toxicity of water bodies and the difficulty of treatment. Rice husk biochar modified with nano-iron tetroxide (RBC-nFe3O4) by polyvinyl alcohol cross-linking internal doping was used to introduce iron-reducing bacteria Klebsiella sp. FC61 to construct a bioreactor. The results of the long-term operation of the bioreactor showed that the removal efficiency of ammonia nitrogen (NH4+-N) and chemical oxygen demand best reached 90.18 and 98.49%, respectively. In addition, in the co-presence of Ni2+, Cd2+, and ciprofloxacin, the bioreactor was still able to remove pollutants efficiently by RBC-nFe3O4 and bio-iron precipitation inside the biocarrier. During the long-term operation, Klebsiella was always the dominant species in the bioreactor. And the sequencing data for functional prediction showed that the biocarrier contained a variety of enzymes and proteins involved in Feammox-related activities to ensure the stable and efficient operation of the bioreactor.

Defense mechanism of Fe(III)-assisted anammox under salt stress: Performance and microbial community dynamics

Anammox process has attracted attention due to its excellent nitrogen removal properties in nitrogen-rich wastewater treatment. However, there were some obstacles for the application of anammox to treat high saline wastewater due to its sensitivity to salinity. In this study, Fe(III) addition strategy was developed to assist anammox to adapt high saline surroundings, with the defense mechanism involved in Fe(III)-assisted anammox emphasized. Nitrogen removal performance of anammox was deteriorated at 3.5% salinity, with the average total nitrogen removal rate of 0.85 kg/(m3·d) observed. The continuous addition of Fe(III) could significantly assist anammox to resist high salinity through facilitating the enrichment of anammox species. Candidatus Kuenenia was the main anammox species and outcompeted Candidatus Brocadia under high saline surrounding. The relative abundance of Candidatus Kuenenia increased with increased salinity and reached 41.04% under 3.5% salinity. The synthesis of key enzymes of anammox species were improved through Fe(III) addition and then facilitated the energy metabolism of anammox bacteria under 3.5% salinity. This study provides a new thought in Fe(III)-assisted anammox enhancement technologies and deepens the insight of anammox in high saline wastewater treatment.

The biochar/Fe-modified biocarrier driven simultaneous NDFO and Feammox to remove nitrogen from eutrophic water

Novelty techniques of Fe(III) reduction coupled to anaerobic ammonium oxidation (i.e. Feammox) and nitrate-dependent Fe(II) oxidation (i.e. NDFO) provide new insights into autotrophic nitrogen removal from eutrophic waters. Given that Feammox and NDFO can theoretically complete the simultaneous NH+ 4-N and NO- 3-N removal via Fe(III)/Fe(II) cycle, this study introduces iron powder to the surface of the biocarrier as a solid-phase source of Fe, and biochar was used as an electron shuttle to mix with the iron powder to improve the bioavailability of iron. Batch experiments was carried out for 70 days using simulated eutrophic water as the medium to investigate the effects of the modified biocarrier for enhanced nitrogen removal. The results showed that BC1 (Fe:BC=1:1) with the highest relative Fe content exhibited the highest nitrogen removal efficiency of 66.74%. XPS and XRD results showed both Fe(III) and Fe(II) compounds on the biocarrier surface, confirming the occurrence of Fe(III)/Fe(II) cycle. The ex-situ activity test indicated that functional activity was positively correlated with the iron content of the biocarrier. The in-situ experiments with different substrates showed the occurrence of Feammox and NDFO. NDFO bacteria (Gallionellaceae), Feammox bacteria (Alicycliphilus), denitrifying and digesting bacteria were enriched, suggesting that the coupled nitrogen removal of NDFO and Feammox is the result of cooperation between different functional microorganisms. Thus, the Fe-modified biocarrier showed superior performance and application potential in catalyzing autotrophic nitrogen removal from eutrophic water by functional microorganisms.

Simultaneous nitrogen and sulfur removal through synergy of sulfammox, anammox and sulfur-driven autotrophic denitrification in a modified bioreactor enhanced by activated carbon

Anaerobic ammonium (NH₄⁺ - N) oxidation coupled with sulfate (SO₄^2-) reduction (sulfammox) is a new pathway for the autotrophic removal of nitrogen and sulfur from wastewater. Sulfammox was achieved in a modified up-flow anaerobic bioreactor filled with granular activated carbon. After 70 days of operation, the NH₄⁺ - N removal efficiency almost reached 70%, with activated carbon adsorption and biological reaction accounting for 26% and 74%, respectively. Ammonium hydrosulfide (NH₄SH) was found in sulfammox by X-ray diffraction analysis for the first time, which confirmed that hydrogen sulfide (H₂S) was one of the sulfammox products. Microbial results indicated that NH₄⁺ - N oxidation and SO₄^2- reduction in sulfammox were carried out by Crenothrix and Desulfobacterota, respectively, in which activated carbon may operate as electron shuttle. In the ¹⁵NH₄⁺ labeled experiment, ³⁰N₂ were produced at a rate of 34.14 μmol/(g sludge·h) and no ³⁰N₂ was detected in the chemical control group, proving that sulfammox was present and could only be induced by microorganisms. The ¹⁵NO₃^- labeled group produced ³⁰N₂ at a rate of 88.77 μmol/(g sludge·h), demonstrating the presence of sulfur-driven autotrophic denitrification. In the adding ¹⁴NH₄⁺ and ¹⁵NO₃^- group, it was confirmed that NH₄⁺ - N was removed by the synergy of sulfammox, anammox and sulfur-driven autotrophic denitrification, where the main product of sulfammox was nitrite (NO₂^-) and anammox was the main cause of nitrogen loss. The findings showed that SO₄^2- as a non-polluting species to environment may substitute NO₂^- to create a new "anammox" process.

Nano iron tetroxide-modified rice husk biochar promoted Feammox performance of Klebsiella sp. FC61 and synergistically removed Ni2+ and ciprofloxacin

The iron reduction coupled with ammonia oxidation process (Feammox) is a biological reaction process associated with the nitrogen cycle that has been discovered in recent years. In this study, the iron-reducing bacterium Klebsiella sp. FC61 was attached by synthesizing nano-loadings of iron tetroxide (nFe₃O₄) onto rice husk biochar (RBC), and the RBC-nFe₃O₄ was used as an electron shuttle to participate in the biological iron reduction process of soluble and insoluble Fe³⁺ to improve the ammonia oxidation efficiency to 81.82%. This acceleration of electron transfer increased the carbon consumption rate and further tuned up the COD removal efficiency to 98.00%. The Feammox could be coupled with iron denitrification for internal nitrogen/iron cycling to reduce the accumulation of nitrate by-products and achieve the recycling of iron. In addition, pollutants such as Ni²⁺, ciprofloxacin, and formed chelates could be removed by pore adsorption and π-π interactions using bio-iron precipitates produced by iron-reducing bacteria.

Efficient nitrogen removal through coupling biochar with zero-valent iron by different packing modes in bioretention system

Three kinds of bioretention were designed to explore the effects of zero-valent iron (ZVI) and biochar on the nitrogen removal performance and to seek a more reasonable packing method in this study. The results showed that the effluent removal rates of nitrate, ammonium and total nitrogen were 53.30 ± 12.68%, 98.41 ± 0.38% and 64.03 ± 8.72% respectively in Bioretention-3 during the rainfall events, while the nitrate concentration decreased gradually with the increase of drying time. According to the batch experiment, it was found that zero-valent iron could release continuously and stably in Bioretention-3 and Bioretention-1 due to the interception effect of biochar on dissolved oxygen. In addition, biochar in soil layer could protect zero-valent iron from excessive oxidation while biochar in the substrate layer could release organic matter to promote heterotrophic denitrification. Microbial community analysis showed that the dominant phyla were Proteobacteria (20.92-40.81%) and Actinobacteriota (9.89-24.54%). The dominant nitrifying genera was Nitrospira while there were also aerobic denitrifying bacteria (Sphingomonas, Bradyrhizobium and Chryseolinea, etc.) in soil layer. In the substrate layer, there was more ferrous iron-mediated autotrophic denitrification process (Thiobacillus, Geobacter and Denitratisoma, etc.) in Bioretention-1 and Bioretention-3 while a larger proportion of Dissimilatory Nitrate Reduction to Ammonium process (DNRA) (Bacillus, Desulfovibrio and Pseudomonas, etc.) in Bioretention-2. In general, this study showed that biochar addition in soil coupled with mixing zero-valent iron and biochar as substrate layer was a more stable and efficient design through various aspects of evidence. It provides a new way for how to use zero-valent iron and biochar to improve nitrogen removal capacity in stormwater management.

Autotrophic denitrification using Fe(II) as an electron donor: A novel prospective denitrification process

As a newly identified nitrogen loss pathway, the nitrate-dependent ferrous oxidation (NDFO) process is emerging as a research hotspot in the field of low carbon to nitrogen ratio (C/N) wastewater treatment. This review article provides an overview of the NDFO process and summarizes the functional microorganisms associated with NDFO from different perspectives. The potential mechanisms by which external factors such as influent pH, influent Fe(II)/N (mol), organic carbon, and chelating agents affect NDFO performance are also thoroughly discussed. As the electron-transfer mechanism of the NDFO process is still largely unknown, the extensive chemical Fe(II)-oxidizing nitrite-reducing pathway (NDFO_chem) of the NDFO process is described here, and the potential enzymatic electron transfer mechanisms involved are summarized. On this basis, a three-stage electron transfer pathway applicable to low C/N wastewater is proposed. Furthermore, the impact of Fe(III) mineral products on the NDFO process is revisited, and existing crusting prevention strategies are summarized. Finally, future challenges facing the NDFO process and new research directions are discussed, with the aim of further promoting the development and application of the NDFO process in the field of nitrogen removal.

Adaptation of anammox consortia in microbial fuel cell to low temperature: Microbial community and predictive functional profiling

The purpose of this study was to explore the tolerance mechanism of anammox consortia in microbial fuel cell (MFC) system at low temperature. Data showed that nearly 80 % total nitrogen removal was achieved after the temperature decreased from 30 °C to 15 °C. The nitrogenremovalrate (NRR) of the system was decreased by 26.3 %, from 0.441 kgN·m^-3·d^-1 at 30 °C to 0.325 kgN·m^-3·d^-1 at 15 °C. Isotope experiment in ¹⁵NH₄⁺-containing reactor found that much more ²⁹N₂ were produced than ³⁰N₂, confirming that anammox was the main ¹⁵NH₄⁺ removal pathway and electrochemical oxidation participate in this process. High throughput sequencing analysis indicated the low temperature stimulated the enrichment of heterotrophic bacteria, such as Comamonadaceae and Rhodobacteraceae. While the relative abundance of Candidatus Brocadia, typical anammox bacteria, decreased significantly. Kyoto Encyclopaedia of Genes and Genomes (KEGG) pathway analysis showed that the low temperature induced a more efficient expression in synthesis of unsaturated fatty acids (UFAs) and ABC membrane transports. This study indicates that anammox consortia are likely to maintain high nitrogen removal performance of MFC system by changing the proportion of membrane composition and EPS exportation.

Enhancement and mechanisms of iron-assisted anammox process

Anaerobic ammonium oxidation (anammox) is a sustainable biological nitrogen removal technology that has limited large-scale applications owing to the low cell yield and high sensitivity of anammox bacteria (AnAOB). Fortunately, iron-assisted anammox, being a highly practical method could be an effective solution. This review focused on the iron-assisted anammox process, especially on its performance and mechanisms. In this review, the effects of iron in three different forms (ionic iron, zero-valent iron and iron-containing minerals) on the performance of the anammox process were systematically reviewed and summarized, and the strengthening effects of Fe (II) seem to be more prominent. Moreover, the detailed mechanisms of iron-assisted anammox in previous researches were discussed from macro to micro perspectives. Additionally, applicable iron-assisted methods and unified strengthening mechanisms for improving the stability of nitrogen removal and shortening the start-up time of the system in anammox processes were suggested to explore in future studies. This review was intended to provide helpful information for scientific research and engineering applications of iron-assisted anammox.

Enhanced nitrogen removal in mainstream deammonification systems at ambient temperature by novel modified carriers and differentiation of microbial community transformation

Zeolite-modified polyurethane (ZP) carriers and zeolite/tourmaline-modified polyurethane (ZTP) carriers were proposed to enhance mainstream deammonification. The system with ZTP carriers was rapidly established in 28 days with a nitrogen removal rate (NRR) of 0.150 kg N·(m³·d)^-1. Moreover, the facilitative effect of tourmaline was suggested by the highest humic acid peak intensity and more balanced potential activity. Besides, SEM-EDS analysis revealed carrier characteristic improvement was achieved in both novel carriers while maintaining an excellent spatial structure. Moreover, the microbial analysis suggested that both modified carriers support the substrate supply to anaerobic ammonium oxidizing bacteria (AnAOB) by enhancing dissimilatory nitrate reduction to ammonium and partial denitrification under nitrate accumulation conditions. Nevertheless, the ZTP system had a greater advantage over maintaining the original AnAOB (Candidatus Jettenia) and ammonium oxidizing bacteria (Nitrosomonas) abundance. Overall, this study provides ZTP carriers with great potential for facilitating the establishment of mainstream deammonification at full-scale WWTPs.

Low strength wastewater anammox start-up and stable operation by inoculating sponge-iron sludge: Cooperation of biological iron and iron bacteria

The application of anaerobic ammonium oxidation (Anammox) technology in low-strength wastewater treatment still faces difficult in-situ start-ups and unstable operations. Sponge-iron sludge (R1) was used as a novel inoculum to provide a promising solution. Conventional activated sludge (R0) was used as the control. However, little is known about the feasibility and performance during the start-up and operation of Anammox combined with biological iron and iron bacteria in an iron sludge system. Anammox was successfully started both in R1 (87 days) and R0 (89 days) with a low-strength influent (with a nitrogen loading rate (NLR) of 43.64 ± 0.41 g N/(m3⋅d)). During long-term operation, the R0 nevertheless produced higher nitrates (9.7 ± 0.1 mg/L) than expected. In contrast, R1 presented no excess nitrate production (2.1 ± 0.06 mg/L). The total inorganic nitrogen (TIN) removal efficiency increased from 78.2 ± 7.1% in R0 to 86.1 ± 4.3% in R1. The iron sludge in R1 was divided equally into three parts and three different nitrogen-feeding methods were used over the 34 days of operation, as follows: first using a mixture of ammonium (27.15 ± 1.0 mg/L) and nitrite (32.7 ± 1.7 mg/L), then only ammonium (27.15 ± 1.0 mg/L) and lastly only nitrite (32.7 ± 1.7 mg/L) as the influent. R1 was a coupled system composed of Anammox, Feammox, and NOx--dependent Fe(II) oxidation (NDFO). The contribution of Feammox and NDFO to TIN removal was 27.1 ± 1.2% and 31.9 ± 0.7%. However, Anammox was the primary nitrogen transformation pathway. X-ray diffraction (XRD) analysis shows that iron hydroxide (Fe(OH)3) and iron oxide hydroxide (FeOOH) were generated in R1. The produced Fe(OH)3 and FeOOH were capable of participating in Feammox and formed a Fe(II)/Fe(III) cycle which further removed nitrogen. Therefore, a highly stable and impressive nitrogen removal performance was demonstrated in the iron sludge Anammox system under the cooperation of biological iron and iron bacteria. The study considered the enrichment of norank_c_OM190, Desulfuromonas, and Thiobacillus and their contribution to the Anammox, Feammox, and NDFO processes, respectively. This study provides a new perspective for the start-up and stable operation of low-strength wastewater Anammox engineering applications.

The performance and mechanism of iron-modified aluminum sludge substrate tidal flow constructed wetlands for simultaneous nitrogen and phosphorus removal in the effluent of wastewater treatment plants

Aiming at the poor N and P removal performance in the effluent of wastewater treatment plants by constructed wetlands (CWs), aluminum sludge (AS) from water supply plants was used to prepare iron-modified aluminum sludge (IAS), and tidal flow constructed wetlands (TFCWs) using IAS as substrates were constructed. By means of high-throughput sequencing, X-ray diffractometer (XRD), etc., the removal mechanism of N and P in the system and fate analysis of key elements were also interpreted. Results showed that an interlayer structure beneficial to adsorbing pollutants was formed in the IAS, due to the iron scraps entering into the molecular layers of AS. The removal rates of TP and TN by IAS-TFCWs reached 95 % and 47 %, respectively, when the flooding/resting time (F/R) and C/N were 6 h/2 h and 6. During the three-year operation of the IAS-TFCWs, the effluent concentrations of COD_Cr, NH₄⁺-N, and TP could comply with Class IV Standard of "Environmental Quality Standards for Surface Water" (GB3838-2002). The mechanism analysis showed that the N removal was effectuated through Fe²⁺ as the electron donor of Fe(II)-driven the autotrophic denitrifying bacteria to reduce nitrate, while the P removal mainly depended on the adsorption reaction between FeOOH in IAS and phosphate. In conclusion, the stable Fe-N cycle in the IAS-TFCWs achieved simultaneous and efficient N and P removal.

Enhanced nitritation/denitritation and potential mechanism in an electrochemically assisted sequencing batch biofilm reactor treating sludge digester liquor with extremely low C/N ratios

Nitritation/denitritation is a promising strategy to treat sludge digester liquor but would be unstable and inefficient at extremely low C/N ratios. Here, a novel electrochemically assisted sequencing batch biofilm reactor (E-SBBR) was established to treat synthetic/real sludge digester liquor with decreasing C/N ratios. The results showed that the E-SBBR achieved stable nitritation and appreciable TN removal (>70 %) even at C/N < 0.5. The high-strength free ammonium (FA) (91.1-132.8 mg NH₃-N/L) and long inhibition time (>9h) magnified by electrolysis promoted the robustness of nitritation through efficient nitrite-oxidizing bacteria elimination. Meanwhile, mass balance denoted that heterotrophic denitritation dominated in the enhanced TN removal and relied on carbon supplementation from cell apoptosis/lysis stimulated by electrolysis and high-strength FA, further supported by the recovery of heterotrophic denitrifiers, fermentation bacteria, and relevant functional genes at extremely low C/N ratios. This study provides a novel nitrogen removal approach for the sludge digester liquor treatment.

Simultaneous nitrogen and phosphorus removal from municipal wastewater by Fe(III)/Fe(II) cycling mediated partial-denitrification/anammox

The efficient removal of nitrogen and phosphorus remains challenging for traditional wastewater treatment. In this study, the feasibility for enhancing the partial-denitrification and anammox process by Fe (III) reduction coupled to anammox and nitrate-dependent Fe (II) oxidation was explored using municipal wastewater. The nitrogen removal efficiency increased from 75.5 % to 83.0 % by adding Fe (III). Batch tests showed that NH₄⁺-N was first oxidized to N₂ or NO₂^--N by Fe (III), then NO₃^--N was reduced to NO₂^--N and N₂ by Fe (II), and finally, NO₂^--N was utilized by anammox. Furthermore, the performance of phosphorus removal improved by Fe addition and the removal efficiency increased to 78.7 %. High-throughput sequencing showed that the Fe-reducing bacteria Pseudomonas and Thiobacillus were successfully enriched. The abundance of anammox bacterial increased from 0.03 % to 0.22 % by multiple nitrite supply pathways. Fe addition presents a promising pathway for application in the anammox process.

Anaerobic ammonium oxidation driven by dissimilatory iron reduction in autotrophic Anammox consortia

Feammox has been applied to wastewater biological nitrogen removal. However, few studies have reported that Fe(III)(hydr)oxides induced Anammox consortia to remove NH4+ via the Feammox pathway. In this study, Fe(OH)3 was added to Anammox systems to investigate its effect on nitrogen removal via Feammox. The specific Anammox activity increased by 39 % by Fe(OH)3. Ammonia oxidation was observed to occur along with Fe(III) reduction and Fe(II) generation, which was further confirmed by the isotope test with feeding 15NH4+-N to detect 30N2. The cyclic voltammetry test showed that electron-storage capacity of Anammox sludge increased with Fe(OH)3. In situ Fourier transform infrared spectroscopy suggested that Fe(OH)3 enhanced the polarization of functional groups of outer membrane cytochrome of Anammox consortia to benefit extracellular electron transfer. This study demonstrated that Fe(OH)3 could induce Anammox consortia to perform extracellular respiration to enhance NH4+-N removal in the Anammox sludge system.

A new concept of waste iron recycling for the enhancement of the anammox process

As a by-product of industry, waste iron scraps (WIS) are low-cost and widely available, which was potential for the development of iron-assisted anammox. In this study, the feasibility of adding WIS to enhance the nitrogen removal of the anammox process (also called WIS-assisted anammox) was demonstrated. Results indicated that the WIS-assisted anammox reactors performed a 15-35% higher nitrogen removal efficiency than that of the control. Compared to the sludge from the control, the sludge from the WIS-assisted anammox reactors had a higher iron content (78-113 g kg^-1 SS) and a better specific anammox activity (10.8-15.5 mg N g^-1 VSS h^-1). The enhanced growth of the anammox bacteria (related to Ca. Kuenenia stuttgartiensis with 99% similarity) in the WIS-assisted anammox reactors was also confirmed by high-throughput sequencing and qPCR. Furthermore, the functional genes predicted by PICRUSt2 revealed a higher level of hydroxylamine oxidoreductase (hao)-like proteins expression of the biomass from the WIS-assisted anammox reactors, implying that the hydroxylamine-related anammox pathway was promoted. Additionally, the observation of cytoplasmic nitrate reductase (narG), copper-containing nitrite reductase (nirK), and nitric oxide reductase (norB) suggested that the introduction of WIS might promote the denitrification ability. This was correlated to the lower ΔNO₃^-/ΔNH₄⁺ ratio observed in these WIS-assisted anammox reactors. Overall, the WIS-assisted anammox offers a sustainable nitrogen removal process for wastewater treatment with waste iron recycling.

New insights on simultaneous nitrate and phosphorus removal in pyrite-involved mixotrophic denitrification biofilter for a long-term operation: Performance change and its underlying mechanism

Simultaneous nitrate and phosphorus removal can be completed by pyrite- and influent organics-involved mixotrophic denitrification and chemical phosphorus removal via iron precipitation. However, so far, how their removal performances change with iron precipitation accumulation remains unclear. In this study, the differences in nitrate and phosphorus removal from municipal tailwater between volcanic and pyrite supported biofilters (V-BF, P-BF) for a long-term operation were investigated, as well as the underlying mechanism for these differences. The nitrate removal efficiencies (NREs) in P-BF were greater than those in V-BF due to the synergistic effect of influent organic and pyrite, as evidenced by comparable TOC consumption and Fe²⁺/SO₄^2- production. The NREs in P-BF were gradually lower than in V-BF as a result of bacterial cell-iron encrustation observed in TEM images, which would deteriorate microbial activity. However, the phosphorus removal efficiencies (PREs) in P-BF remained consistently higher than in V-BF, resulting from chemical phosphorus removal which was confirmed that P, Fe and O elements dominated on the pyrite surface after use by SEM-EDS. The dominant denitrifying bacteria differed significantly, autotrophic and heterotrophic denitrifying microorganisms coexisted in P-BF. The relative abundances of the narG coding gene in P-BF were higher than that in V-BF, which was consistent with the total relative abundances of identified denitrifying bacteria. Besides, the mechanism of simultaneous nitrogen and phosphorus removal in the pyrite-involved mixotrophic denitrification process has been deduced. This work has significant implications for the practical application of a pyrite-involved mixotrophic denitrification process for low C/N wastewater treatment.

Recent progress in applications of Feammox technology for nitrogen removal from wastewaters: A review

Feammox process is crucial for the global nitrogen cycle and has great potentials for the treatment of low COD/NH₄⁺-N wastewaters. This work provides a systematic and comprehensive overview of the Feammox process. Specifically, underlying mechanisms and functional microbes mediating the Feammox process are summarized in detail. And key influencing factors including pH, temperature, dissolved oxygen, organic carbon, source of Fe(III) as well as various electron shuttles are discussed. Additionally, recent development trends and attempts of the Feammox technology in wastewater treatment applications are reviewed, and perspectives for future development are presented. A thorough review of the recent progress in Feammox process is expected to provide valuable information for further process optimization, which is helpful to achieve a more economical operation and better nitrogen removal performance in future field applications.

Enhanced removal of ammonia in Fe(VI)/Br- oxidation system: Kinetics, transformation mechanism and theoretical calculations

This work systematically examined the capability of ferrate (Fe(VI)) for ammonia oxidation, revealing for the first time that bromide ions (Br^-) played an important role in promoting the removal of ammonia in Fe(VI) system. In the presence of 10.0 mM Br^-, the removal efficiency of ammonia was nearly 3.4 times that of the control, and 1.0 mM ammonia was almost completely removed after two rounds addition of 1.0 mM Fe(VI) in 60 min. PMSO probe test, electron paramagnetic resonance spectra and radical quenching experiments were employed to interpret the underlying promotion mechanism of Br^-, and it was proposed that the formation of active bromine (HOBr/OBr^-) played a dominant role in the enhanced oxidative removal of ammonia by Fe(VI). Further kinetic model simulations revealed that HOBr/OBr^- and Fe(VI) were the two major reactive species in Fe(VI)/Br^- system, accounting for 66.7% and 33.0% of ammonia removal, respectively. As the target contaminant, ammonia could quickly consume the generated HOBr/OBr^-, thereby suppressing the formation of brominated disinfection byproducts. Finally, NO₃^- was identified as the dominant transformation product of ammonia, and density functional theory (DFT) calculations revealed that six reaction stages were involved in ammonia oxidation with the first step as the rate-limiting step. This work would enable the full use of coexisting bromides for effective removal of ammonia from natural waters or wastewaters by in situ Fe(VI) oxidation method.

Phylogenomic evidence for the Origin of Obligately Anaerobic Anammox Bacteria around the Great Oxidation Event

The anaerobic ammonium oxidation (anammox) bacteria can transform ammonium and nitrite to dinitrogen gas, and this obligate anaerobic process accounts for up to half of the global nitrogen loss in surface environments. Yet its origin and evolution, which may give important insights into the biogeochemistry of early Earth, remain enigmatic. Here, we performed a comprehensive phylogenomic and molecular clock analysis of anammox bacteria within the phylum Planctomycetes. After accommodating the uncertainties and factors influencing time estimates, which include implementing both a traditional cyanobacteria-based and a recently developed mitochondria-based molecular dating approach, we estimated a consistent origin of anammox bacteria at early Proterozoic and most likely around the so-called Great Oxidation Event (GOE; 2.32–2.5 Ga) which fundamentally changed global biogeochemical cycles. We further showed that during the origin of anammox bacteria, genes involved in oxidative stress adaptation, bioenergetics, and anammox granules formation were recruited, which might have contributed to their survival on an increasingly oxic Earth. Our findings suggest the rising levels of atmospheric oxygen, which made nitrite increasingly available, was a potential driving force for the emergence of anammox bacteria. This is one of the first studies that link the GOE to the evolution of obligate anaerobic bacteria.

Genome-Resolved Metagenomic Analysis of Groundwater: Insights into Arsenic Mobilization in Biogeochemical Interaction Networks

High-arsenic (As) groundwaters, a worldwide issue, are critically controlled by multiple interconnected biogeochemical processes. However, there is limited information on the complex biogeochemical interaction networks that cause groundwater As enrichment in aquifer systems. The western Hetao basin was selected as a study area to address this knowledge gap, offering an aquifer system where groundwater flows from an oxidizing proximal fan (low dissolved As) to a reducing flat plain (high dissolved As). The key microbial interaction networks underpinning the biogeochemical pathways responsible for As mobilization along the groundwater flow path were characterized by genome-resolved metagenomic analysis. Genes associated with microbial Fe(II) oxidation and dissimilatory nitrate reduction were noted in the proximal fan, suggesting the importance of nitrate-dependent Fe(II) oxidation in immobilizing As. However, genes catalyzing microbial Fe(III) reduction (omcS) and As(V) detoxification (arsC) were highlighted in groundwater samples downgradient flow path, inferring that reductive dissolution of As-bearing Fe(III) (oxyhydr)oxides mobilized As(V), followed by enzymatic reduction to As(III). Genes associated with ammonium oxidation (hzsABC and hdh) were also positively correlated with Fe(III) reduction (omcS), suggesting a role for the Feammox process in driving As mobilization. The current study illustrates how genomic sequencing tools can help dissect complex biogeochemical systems, and strengthen biogeochemical models that capture key aspects of groundwater As enrichment.

Metagenomics illuminated the mechanism of enhanced nitrogen removal and vivianite recovery induced by zero-valent iron in partial-denitrification/anammox process

In this study, a novel strategy of zero-valent iron (ZVI) combined with acetic acid was proposed to optimize partial-denitrification/anammox (PD/A) process, and enhanced nitrogen removal mechanism was elucidated through metagenomics. Results showed that the optimal nitrogen and phosphorus removal were as high as 99.50% and 98.37%, respectively, with vivianite being precipitated as the main byproduct. The occurrence of Feammox was a crucial link for enhanced ammonia removal and vivianite recovery. Metagenomic analysis further certified that long-term acclimation of optimization strategy triggered DNRA-based nitrate reducing genes (narY/Z and nrfA) assigned to Candidatus Brocadia, which allow direct uptake of nitrate by the anammox. Additionally, ZVI might act as a new electron donor to decrease organics dependence of PD by reducing the abundance of genes for electron production involved in carbon metabolism. However, FA addition enhanced the relative abundances of genes involved in anammox including nitrogen reduction and oxidation, thereby accelerating nitrogen removal.

Achieving Ammonium Removal Through Anammox-Derived Feammox With Low Demand of Fe(III)

Feammox-based nitrogen removal technology can reduce energy consumption by aeration and emission of carbon dioxide. However, the huge theoretical demand for Fe(III) becomes a challenge for the further development of Feammox. This study investigated an anammox-derived Feammox process with an intermittent dosage of Fe2O3 and proposed a novel approach to reduce the Fe(III) consumption. The results showed that anammox genera Candidatus Brocadia and Candidatus Kuenenia in the seed anammox sludge significantly decreased after cultivation. The formation of N2 was the dominating pathway in Feammox while that of nitrite and nitrate could be neglected. Batch tests showed that specific Feammox activity of ammonium oxidation was 1.14–9.98 mg N/(g VSS·d). The maximum removal efficiency of ammonium reached 52.3% in the bioreactor with a low dosage of Fe(III) which was only 5.8% of the theoretical demand in Feammox. The removal of ammonium was mainly achieved through Feammox, while partial nitrification/anammox also played a role due to the non-power and unintentional oxygen leakage. The super-low oxygen also responded to the low demand of Fe(III) in the bioreactor because it could trigger the cycle of Fe(III)/Fe(II) by coupling Feammox and chemical oxidation of Fe(II) to Fe(III). Therefore, anammox-derived Feammox can achieve the removal of ammonium with low Fe(III) demand at super-low oxygen.

Simultaneously enhanced removal of PAHs and nitrogen driven by Fe2+/Fe3+ cycle in constructed wetland through automatic tidal operation

The lack of dissolved oxygen and weak substrate removal capacity in constructed wetlands (CW) leads to terrible removal of nitrogen and polycyclic aromatic hydrocarbons (PAHs). In this study, automatic tidal flow CW microcosms were constructed by improving the oxygen environment (siphon and air-duct) and substrate (magnetite) to enhance purification performance and the mechanism was explored. The results showed that the addition of air-duct could improve the oxygen collection and thus improved the NH₄⁺ removal efficiency. Additionally, nitrogen removal was improved greatly due to the simultaneous nitrification and denitrification in aerobic layer with the addition of magnetite. Mass balance indicated the microbial degradation dominated (32-62%) the removal of PAHs. Metagenomic analysis proved the existence of magnetite enhanced the number of PAHs-degrading bacteria, functional groups and metabolic pathways and thus greatly improved the microbial degradation of PAHs. Furthermore, Fe²⁺/Fe³⁺ cycle played an important role in promoting the anaerobic degradation of PAHs, which might be served as an electron conduit to establish the direct interspecies electron transfer between iron-reducing bacteria (e.g. Deltaproteobacteria bacterium) and Anaerolineae bacterium to degrade PAHs efficiently. This study provided better understanding of the simultaneous removal of PAHs and nitrogen in tidal flow CWs.

Use of sponge iron dosing in baffled subsurface-flow constructed wetlands for treatment of wastewater treatment plant effluents during autumn and winter

Sponge iron (SI) is widely used in water treatment. As effluents from wastewater treatment plant (WWTP) require advanced treatment methodology, three forms of constructed wetlands (CWs): wetlands with sponge iron (SI), copper sulfate modified sponge iron (Cu/SI), and sponge iron coupled with solid carbon sources (C/SI), have been investigated in this paper for the removal effects of organic matter and nutrients in WWTP effluents, and the corresponding mechanisms have been analyzed. The results showed the effect of baffled subsurface-flow constructed wetland (BSFCW) with SI dosing to purify the WWTP effluents after the stable operation. The water flow of this BSFCW is the repeated combination of upward flow and downward flow, which can provide a longer treatment pathway and microbial exposure time. The average removal rates of total inorganic nitrogen (TIN) were 27.80%, 30.17%, and 44.83%, and the average removal rates of chemical oxygen demand (COD) were 19.96%, 23.73%, and 18.38%. The average removal rates of total phosphorus (TP) were 85.94%, 82.14%, and 83.95%. Cu/SI improved the dissolution of iron, C/SI improved denitrification, and a winter indoor temperature retention measure was adopted to increase the effectiveness of wetland treatment during the winter months. After comprehensively analyzing X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and two-dimensional numerical simulation diagrams, a plausible conjecture that microbes use electrons from SI for autotrophic denitrification is presented. Moreover, the stress effect of wetlands dosed with SI on plants decreased stepwise along the course since C/SI used on wetlands had less impact on plant stress.

Mainstream partial denitrification-anammox in sand and expanded clay deep-bed polishing filters under practical loading rates and backwashing conditions

This study focused on evaluating the feasibility of expanded clay and sand as media types for mainstream partial denitrification-anammox (PdNA) in deep-bed single-media polishing filters under nitrogen and solids loading rates as well as backwash conditions similar to conventional denitrification filters. The surface roughness and iron content of the expanded clay were hypothesized to allow for enhanced anammox retention, nitrogen removal rates, and runtimes. However, under the tested loading rates and backwash conditions, no clear benefit of expanded clay was observed compared with conventional sand. This study showed the feasibility of PdNA in filters with both sand and expanded clay with PdN efficiencies of 76% and 77%, PdNA rates of 840 and 843 g N/m³ /d and TIN removal rates of 960 and 964 g N/m³ /d, respectively. Glycerol demands were 1.5-1.6 g COD _added per g TIN _removed , thus indicating potential carbon savings up to 75% compared with conventional denitrification. Overall, this study showed for the first time PdNA filters performing at nitrogen removal rates double that of previous PdNA studies under realistic conditions while providing insights into the media choice and backwashing conditions. Future research on expanded clay backwash conditions is needed to provide its full potential in PdNA filters. PRACTITIONER POINTS: Hydraulic and TSS loading rates similar to conventional denitrification can be applied in PdNA filters. Conventional sand can be used when retrofitting conventional denitrification filters into PdNA filters. Carbon savings up to 75% can be achieved with glycerol when retrofitting conventional filters into PdNA filters.

Autotrophic Fe-Driven Biological Nitrogen Removal Technologies for Sustainable Wastewater Treatment

Fe-driven biological nitrogen removal (FeBNR) has become one of the main technologies in water pollution remediation due to its economy, safety and mild reaction conditions. This paper systematically summarizes abiotic and biotic reactions in the Fe and N cycles, including nitrate/nitrite-dependent anaerobic Fe(II) oxidation (NDAFO) and anaerobic ammonium oxidation coupled with Fe(III) reduction (Feammox). The biodiversity of iron-oxidizing microorganisms for nitrate/nitrite reduction and iron-reducing microorganisms for ammonium oxidation are reviewed. The effects of environmental factors, e.g., pH, redox potential, Fe species, extracellular electron shuttles and natural organic matter, on the FeBNR reaction rate are analyzed. Current application advances in natural and artificial wastewater treatment are introduced with some typical experimental and application cases. Autotrophic FeBNR can treat low-C/N wastewater and greatly benefit the sustainable development of environmentally friendly biotechnologies for advanced nitrogen control.

Anaerobic ammonium oxidation coupled to Fe(III) reduction: Discovery, mechanism and application prospects in wastewater treatment

Fe(III) reduction coupled with anaerobic ammonium oxidation is known as Feammox. Feammox, which was first discovered in wetland ecosystems, has the potential to be used in wastewater treatment systems due to its ability to remove ammonium. Feammox can produce N₂, NO₂^- or NO₃^- through the reduction of Fe(III) and oxidation of ammonium, which is a potential process to nitrogen loss from aquatic ecosystems and terrestrial ecosystems. The Acidimicrobiaceae sp. A6 was the first Feammox functional bacteria that was successfully isolated from wetlands. The nitrogen removal effect of Feammox can be influenced by many environmental factors, such as pH, organic matter, and different sources of Fe(III). Feammox has broad application prospects, but more exploration is needed to apply this principle to wastewater treatment. This review introduces the development, mechanism, functional microbes and factors affecting the Feammox process, and discusses its potential applications.

Insight into enrichment of anammox bacteria by a polyurethane sponge carrier coupled with iron-carbon micro-electrolysis under no strict anaerobic condition

A novel composite carrier (ICME-PS) was formed by coupling polyurethane sponge carriers (PS) with different pore sizes (15, 25, 40 ppi) and iron-carbon micro-electrolysis (ICME), which was used for enrichment of anammox bacteria and stable operation under no strict anaerobic condition. An increase of 5.67%-38.55% in specific anammox activity (SAA), an significant enhancement of biofilm stability and an improvement of 14.61%-42.38% in Ca.Brocadia were observed in ICME-PS, compared to PS carriers. ICME played a dual role: 1) contributed to the formation of an anaerobic microenvironment; 2) used for nitrogen cycle reactions. Additionally, small-pore carriers with highest biofilm stability can be used in high shear environments, while medium-pore carriers achieved the highest SAA in stable environments. Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) analysis indicated that ICME application reduced the energy barrier and improved aggregation performance. This study designed a novel composite carrier to broaden the application of anammox under no strict anaerobic condition.

Influencing mechanisms of siderite and magnetite, on naphthalene biodegradation: Insights from degradability and mineral surface structure

Biodegradation is the most economical and efficient process for remediating polycyclic aromatic hydrocarbons (PAHs) such as naphthalene (Nap). Soil composition is pivotal in controlling PAH migration and transformation. Iron minerals such as siderite and magnetite are the primary components of soil and sediment and play key roles in organic pollutant biodegradation. However, it is unclear whether siderite and magnetite promote or inhibit Nap biodegradation. The effects of siderite and magnetite on Nap biodegradation were investigated through batch experiments in this study. The results indicated that siderite increased Nap biodegradation efficiency by 7.87%, whereas magnetite inhibited Nap biodegradation efficiency by 3.54%. In the presence of siderite, Nap-degrading bacteria with acid-producing effects promoted siderite dissolution via metabolic activity, resulting in an increased Fe (II) concentration in solution which accelerated the iron reduction process and promoted Nap biodegradation. In addition, the presence of iron minerals altered the genus-level community structure. Anaerobic sulfate-reducing bacteria such as Desulfosporosinus occurred in the presence of siderite, indicating that sulfate reduction occurred in advance under the influence of siderite. In the presence of magnetite, Fe (III) in iron minerals were converted to Fe (II), and under the mediation of microorganisms, Fe (II) combined with carbonate to form secondary minerals (e.g., siderite). Secondary minerals were attached to the surface of magnetite, which inhibited magnetite dissolution and reduced the efficiency of Fe (III) utilization by microorganisms. Furthermore, as the reaction proceeds, acid-producing microorganisms promoted magnetite further dissolution, resulting in a longer duration of the Fe (III) reduction process. Bacteria utilizing sulfuric acid as the terminal electron acceptor consumed organic matter more rapidly than those using iron as the terminal electron acceptor. Therefore, magnetite inhibited Nap degradation. These observations enhance our understanding of the interaction mechanisms of iron minerals, organic pollutants, and degrading bacteria during the biodegradation process.

Self-regenerable bio-hybrid with biogenic ferrous sulfide nanoparticles for treating high-concentration chromium-containing wastewater

Biogenic ferrous sulfide nanoparticles (bio-FeS) as low-cost and green-synthesized nanomaterial are promising for heavy metals removal, but the need for complicated extraction, storage processes and the production of iron sludge still restrict their practical application. Here, a self-regenerable bio-hybrid consisting of bacterial cells and self-assembled bio-FeS was developed to efficiently remove chromium (Cr(VI)). A dense layer of bio-FeS was distributed on the cell surface and in the periplasmic space of Shewanella oneidensis MR-1, endowing the bacterium with good Cr(VI) tolerance and unusual activity for bio-FeS-mediated Cr(VI) reduction. An artificial transmembrane electron channel was constituted by the bio-FeS to facilitate extracellular electron pumping, enabling efficient regeneration of extracellular bio-FeS for continuous Cr(VI) reduction. The bio-hybrid maintained high activity within three consecutive treatment-regeneration cycles for treating both simulated Cr(VI)-containing wastewater (50 mg/L) and real electroplating wastewater. Importantly, its activity can be facilely and fully restored through bio-FeS re-synthesis or regeneration with replenished fresh bacteria. Overall, the bio-hybrid merges the self-regeneration ability of bacteria with high activity of bio-FeS , opening a promising new avenue for sustainable treatment of heavy metal- containing wastewater.

The effects of magnetite on anammox performance: Phenomena to mechanisms

Low temperature is adverse to anaerobic ammonium oxidation (anammox) reaction while proper Fe addition can enhance anammox performance. Therefore, batch assays were conducted to investigate the potential effects of magnetite (100 μm, 20 μm and 200 nm) on anammox performance which were achieved from the reactor operated at 10-25 °C. After 3 runs, the results indicated that nano-scale magnetite improved the nitrogen elimination significantly. The specific anammox activity (SAA) of the group with nano-magnetite amendments was greater than the other groups after 3 runs (13.5, 12.9, 14.3, 15.4 and 15.7 mgTN/(gVSS·h)), reaching 18.0 mgTN/(gVSS·h). The distribution of magnetite in the granules were then analyzed using X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDS). The results indicated that nano-magnetite was more feasible to attached to the surface of the granules which might accelerate the release of Fe(II) or Fe(III) to enhance anammox performance.

Anaerobic Ammonium Removal Pathway Driven by the Fe(II)/Fe(III) Cycle through Intermittent Aeration

Feammox, that is, Fe(III) reduction coupled to anaerobic ammonium oxidation, has been reported to play an important role in the nitrogen cycle in natural environments. However, the application of Feammox in wastewater treatment is limited because continuous Fe(III) supplementation is required for achieving continuous nitrogen removal, which is not feasible in practice. In this study, air was aerated intermittently into the Feammox system containing iron and high-content ammonium for oxidizing Fe(II) generated from Feammox to Fe(III), then, the produced Fe(III) participated in the next round of Feammox, leading to continuous nitrogen removal through the Fe(II)/Fe(III) cycle. The results showed that after each 10 min of aeration (150 mL/min), every 6-7 days, dissolved oxygen (DO) increased from 0 to about 0.4 mg/L, accompanied by a decrease in Fe(II) and an increase in Fe(III). One day after the aeration, DO was undetectable, and then, Fe(II) content increased and Fe(III) content decreased. On day 90, NH₄⁺-N content in the aerated reactor was only 10.2 mg/L, while it remained at around 288.3 mg/L in the aeration-free group. X-ray diffraction showed that the generated Fe(III) through air aeration was Fe(OH)₃. Microbial analysis showed that anammox and nitrification/denitrification could be excluded in the system. This NH₄⁺ removal process, driven by the Fe(II)/Fe(III) cycle with O₂ as the terminal electron acceptor, might be used as an in situ remediation method for treating high-content NH₄⁺.