Comparative toxicity reduction potential of UV/sodium percarbonate and UV/hydrogen peroxide treatments for bisphenol A in water: An integrated analysis using chemical, computational, biological, and metabolomic approaches

Toxicity assessment of dioxins and their transformation by-products from inferred degradation pathways

Due to the significant POPs characteristics, dioxins caused concern in public health and environmental protection. Evaluating the toxicity risk of dioxin degradation pathways is critical. OCDD, 1,2,3,4,6,7,8-HpCDD, and 1,2,3,4,6,7,8-HpCDF, which are highly abundant in the environment and have strong biodegradation capabilities, were selected as precursor molecules in this study. Firstly, their transformation pathways were deduced during the metabolism of biometabolism, microbial aerobic, microbial anaerobic, and photodegradation pathways, and density function theory (DFT) was used to calculate the Gibbs free energy to infer the possibility of the occurrence of the transformation pathway. Secondly, the carcinogenic potential of the precursors and their degradation products was evaluated using the TOPKAT modeling method. With the help of the positive indicator (0-1) normalization method and heat map analysis, a significant increase in the toxic effect of some of the transformation products was found, and it was inferred that it was related to the structure of the transformation products. Meanwhile, the strength of the endocrine disrupting effect of dioxin transformation products was quantitatively assessed using molecular docking and subjective assignment methods, and it was found that dioxin transformation products with a higher content of chlorine atoms and molecules similar to those of thyroid hormones exhibited a higher risk of endocrine disruption. Finally, the environmental health risks caused by each degradation pathway were comprehensively assessed with the help of the negative indicator (1-2) standardization method, which provides a theoretical basis for avoiding the toxicity risks caused by dioxin degradation transformation. In addition, the 3D-QSAR model was used to verify the necessity and rationality of this study. This paper provides theoretical support and reference significance for the toxicity assessment of dioxin degradation by-products from inferred degradation pathways.

Mechanical energy triggered piezo-catalyzation of Bi2WO6 nanoplates on ferrate (Fe(VI)) oxidation in alkaline media: Performance and mechanism

Piezo-electricity, as a unique physical phenomenon, demonstrates high effectiveness in capturing the environmental mechanical energy into polarization charges, offering the possibility to activate the advanced oxidation processes via the electron pathway. However, information regarding the intensification of Fe(VI) through piezo-catalysis is limited. Therefore, our study is the first to apply Bi2WO6 nanoplates for piezo-catalyzation of Fe(VI) to enhance bisphenol A (BPA) degradation. Compared to Fe(VI) alone, the Fe(VI)/piezo/Bi2WO6 system exhibited excellent BPA removal ability, with the degradation rate increased by 32.6% at pH 9.0. Based on the experimental and theoretical results, Fe(VI), Fe(V), Fe(IV) and •OH were confirmed as reaction active species in the reaction, and the increased BPA removal mainly resulted from the enhanced formation of Fe(IV)/Fe(V) species. Additionally, effects of coexisting anions (e.g., Cl-, NO3-, SO42- and HCO3-), humic acid and different water matrixes (e.g., deionized water, tap water and lake water) on BPA degradation were studied. Results showed the Fe(VI)/piezo/Bi2WO6 system still maintained satisfactory BPA degradation efficiencies under these conditions, guaranteeing future practical applications in surface water treatment. Furthermore, the results of intermediates identification, ECOSAR calculation and cytotoxicity demonstrated that BPA degradation by Fe(VI)/piezo/Bi2WO6 posed a diminishing ecological risk. Overall, these findings provide a novel mechanical energy-driven piezo-catalytic approach for Fe(VI) activation, enabling highly efficient pollutant removal under alkaline condition.

A Novel Spectrophotometric Method for Determination of Percarbonate by Using N, N-Diethyl-P-Phenylenediamine as an Indicator and Its Application in Activated Percarbonate Degradation of Ibuprofen

Sodium percarbonate (SPC) concentration can be determined spectrophotometrically by using N, N-diethyl-p-phenylenediamine (DPD) as an indicator for the first time. The ultraviolet-visible spectrophotometry absorbance of DPD•+ measured at 551 nm was used to indicate SPC concentration. The method had good linearity (R2 = 0.9995) under the optimized experimental conditions (pH value = 3.50, DPD = 4 mM, Fe2+ = 0.5 mM, and t = 4 min) when the concentration of SPC was in the range of 0-50 μM. The blank spiked recovery of SPC was 95-105%. The detection limit and quantitative limit were 0.7-1.0 μM and 2.5-3.3 μM, respectively. The absorbance values of DPD•+ remained stable within 4-20 min. The method was tolerant to natural water matrix and low concentration of hydroxylamine (<0.8 mM). The reaction stoichiometric efficiency of SPC-based advanced oxidation processes in the degradation of ibuprofen was assessed by the utilization rate of SPC. The DPD and the wastewater from the reaction were non-toxic to Escherichia coli. Therefore, the novel Fe2+/SPC-DPD spectrophotometry proposed in this work can be used for accurate and safe measurement of SPC in water.

A review of factors affecting the formation and roles of primary and secondary reactive species in UV254-based advanced treatment processes

The presence of organic micropollutants (OMPs) in water has been threatening human health and aquatic ecosystems worldwide. Ultraviolet-based advanced treatment processes (UV-ATPs) are one of the most effective and promising technologies to transform OMPs in water; therefore, an increasing number of emerging UV-ATPs are proposed. However, appropriate selection of UV-ATPs for practical applications is challenging because each UV-ATP generates different types and concentrations of reactive species (RSs) that may not be sufficient to degrade specific types of OMPs. Furthermore, the concentrations and types of RSs are highly influenced by anions and dissolved organic matter (DOM) coexisting in real waters, making systematic understandings of their interfering mechanisms difficult. To identify and address the knowledge gaps, this review provides a comparison of the generations and variations of various types of RSs in different UV-ATPs. These analyses not only prove the importance of water matrices on formation and consumption of primary and secondary RSs under different conditions, but also highlight the non-negligible roles of optical properties and reactivities of DOM and anions. For example, different UV-ATPs may be applicable to different target OMPs under different conditions; and the concentrations and roles of secondary RSs may outperform those of primary RSs in OMP degradation for real applications. With continuous progress and outstanding achievements in the UV-ATPs, it is hoped that the findings and conclusions of this review could facilitate further research and application of UV-ATPs.

Hydroxyl radical dominated ibuprofen degradation by UV/percarbonate process: Response surface methodology optimization, toxicity, and cost evaluation

Ibuprofen (IBP) is a typical nonsteroidal anti-inflammatory drug with a wide range of applications, large dosages, and environmental durability. Therefore, ultraviolet-activated sodium percarbonate (UV/SPC) technology was developed for IBP degradation. The results showed that IBP could be efficiently removed using UV/SPC. The IBP degradation was enhanced with prolonged UV irradiation time, with the decreasing IBP concentration and the increasing SPC dosage. The UV/SPC degradation of IBP was highly adaptable to pH ranging from 4.05 to 8.03. The degradation rate of IBP reached 100% within 30 min. The optimal experimental conditions for IBP degradation were further optimized using response surface methodology. IBP degradation rate reached 97.3% under the optimal experimental conditions: 5 μM of IBP, 40 μM of SPC, 7.60 pH, and UV irradiation for 20 min. Humic acid, fulvic acid, inorganic anions, and natural water matrix inhibited the IBP degradation to varying degrees. Scavenging experiments of reactive oxygen species indicated that hydroxyl radical played a major role in the UV/SPC degradation of IBP, while carbonate radical played a minor role. Six IBP degradation intermediates were detected, and hydroxylation and decarboxylation were proposed as the primary degradation pathways. An acute toxicity test, based on the inhibition of luminescence in Vibrio fischeri, indicated that the toxicity of IBP during UV/SPC degradation decreased by 11%. An electrical energy per order value of 3.57 kWh m^-3 indicated that the UV/SPC process was cost-effective in IBP decomposition. These results provide new insights into the degradation performance and mechanisms of the UV/SPC process, which can potentially be used for practical water treatment in the future.

Mechanism and security of UV driven sodium percarbonate for sulfamethoxazole degradation using DFT and metabolomic analysis

Recently, sodium percarbonate (SPC) as a solid substitute for H₂O₂ has aroused extensive attention in advanced oxidation processes. In current work, the degradation kinetics and mechanisms of antibiotic sulfamethoxazole (SMX) by ultraviolet (UV) driven SPC system were explored. The removal efficiency of SMX was enhanced as the increasing dosage of SPC. Moreover, hydroxyl radical (•OH), carbonate radical (CO₃^•-) and superoxide radical (O₂^•-) were verified to be presented by scavenger experiments and •OH, CO₃^•- exhibited a significant role in SMX degradation. Reactions mediated by these radicals were affected by anions and natural organic matters, implying that an incomplete mineralization of SMX would be ubiquitous. The screening four intermediates and transformation patterns of SMX were verified by DFT analysis. Metabolomic analysis demonstrated that a decreasing negative effect in E. coli after 24 h exposure was induced by intermediates products. In detail, SMX interfered in some key functional metabolic pathways including carbohydrate metabolism, pentose and glucuronate metabolism, nucleotide metabolism, arginine and proline metabolism, sphingolipid metabolism, which were mitigated after UV/SPC oxidation treatment, suggesting a declining environmental risk of SMX. This work provided new insights into biological impacts of SMX and its transformation products and vital guidance for SMX pollution control using UV/SPC technology.

Comparison of UV and UV-LED activated sodium percarbonate for the degradation of O-desmethylvenlafaxine

As an active metabolite of venlafaxine and emerging antidepressant, O-desmethylvenlafaxine (ODVEN) was widely detected in different water bodies, which caused potential harm to human health and environmental safety. In this study, the comparative work on the ODVEN degradation by UV (254 nm) and UV-LED (275 nm) activated sodium percarbonate (SPC) systems was systematically performed. The higher removal rate of ODVEN can be achieved under UV-LED direct photolysis (14.99%) than UV direct photolysis (4.57%) due to the higher values of photolysis coefficient at the wavelength 275 nm. Significant synergistic effects were observed in the UV/SPC (80.38%) and UV-LED/SPC (53.57%) systems and the former exhibited better performance for the elimination of ODVEN. The degradation of ODVEN all followed the pseudo-first-order kinetics well in these processes, and the pseudo-first-order rate constant (k_obs) increased with increasing SPC concentration. Radicals quenching experiments demonstrated that both ·OH and CO₃·^- were involved in the degradation of ODVEN and the second-order rate constant of ODVEN with CO₃·^- (1.58 × 10⁸ (mol/L)^-1 sec^-1) was reported for the first time based on competitive kinetic method. The introduction of HA, Cl^-, NO₃^- and HCO₃^- inhibited the ODVEN degradation to varying degrees in the both processes. According to quantum chemical calculation, radical addition at the ortho-position of the phenolic hydroxyl group was confirmed to be the main reaction pathways for the oxidation of ODVEN by ·OH. In addition, the oxidation of ODVEN may involve the demethylation, H-abstraction, OH-addition and C-N bond cleavage. Eventually, the UV-LED/SPC process was considered to be more cost-effective compared to the UV/SPC process, although the UV/SPC process possessed a higher removal rate of ODVEN.

Targeted Decomplexation of Metal Complexes for Efficient Metal Recovery by Ozone/Percarbonate

Traditional methods cannot efficiently recover Cu from Cu(II)-EDTA wastewater and encounter the formation of secondary contaminants. In this study, an ozone/percarbonate (O₃/SPC) process was proposed to efficiently decomplex Cu(II)-EDTA and simultaneously recover Cu. The results demonstrate that the O₃/SPC process achieves 100% recovery of Cu with the corresponding k_obs value of 0.103 min^-1 compared with the typical ^•OH-based O₃/H₂O₂ process (81.2%, 0.042 min^-1). The carbonate radical anion (CO₃^•-) is generated from the O₃/SPC process and carries out the targeted attack of amino groups of Cu(II)-EDTA for decarboxylation and deamination processes, resulting in successive cleavage of Cu-O and Cu-N bonds. In comparison, the ^•OH-based O₃/H₂O₂ process is predominantly responsible for the breakage of Cu-O bonds via decarboxylation and formic acid removal. Moreover, the released Cu(II) can be transformed into stable copper precipitates by employing an endogenous precipitant (CO₃^2-), accompanied by toxic-free byproducts in the O₃/SPC process. More importantly, the O₃/SPC process exhibits excellent metal recovery in the treatment of real copper electroplating wastewater and other metal-EDTA complexes. This study provides a promising technology and opens a new avenue for the efficient decomplexation of metal-organic complexes with simultaneous recovery of valuable metal resources.

Uncovering novel disinfection mechanisms of solar light/periodate system: The dominance of singlet oxygen and metabolomic insights

Disinfection plays an essential role in waterborne pathogen control and disease prevention, especially during the COVID-19 pandemic. Catalyst-free solar light/periodate (PI) system has recently presented great potential in water disinfection, whereas the in-depth chemical and microbiological mechanisms for efficient bacterial inactivation remain unclear. Our work delineated firstly the critical role of singlet oxygen, instead of reported hydroxyl radicals and superoxide radicals, in dominating bacterial inactivation by the PI/simulated sunlight (SSL) system. Multi-evidence demonstrated the prominent disinfection performance of this system for Staphylococcus aureus in terms of culturability (&gt; 6 logs CFU), cellular integrity, and metabolic activity. Particularly, the excellent intracellular DNA removal (&gt; 95%) indicated that PI/SSL system may function as a selective disinfection strategy to diminish bacterial culturability without damaging the cell membrane. The PI/SSL system could also effectively inhibit bacterial regrowth for &gt; 5 days and horizontal gene transfer between E. coli genera. Nontargeted metabolomic analysis suggested that PI/SSL system inactivated bacteria by triggering the accumulation of intracellular reactive oxygen species and the depletion of reduced glutathione. Additionally, the PI/SSL system could accomplish simultaneous micropollutant removal and bacterial inactivation, suggesting its versatility in water decontamination. Overall, this study deciphers more comprehensive antibacterial mechanisms of this environmentally friendly disinfection system, facilitating the technical development and application of the selective disinfection strategy in environmental pathogen control.

Degradation mechanism of BPA under VUV irradiation: efficiency contribution and DFT calculations

Bisphenol A (BPA) is regarded as a hazardous pollutant that exists widely in aquatic environments, posing a severe threat to human health. In this study, a vacuum ultraviolet (VUV) lamp emitting a hybrid of 254 nm and 185 nm light was used to degrade BPA. Results indicated that photolysis via 254 nm wavelength accounted for 24.93% for BPA decay, while indirect oxidation was responsible for 52.27% of decay. Results confirmed that the degradation of BPA under VUV illumination mainly occurred via photo-excited degradation and ·OH electrophilic addition reactions based on average local ionization energy (ALIE) calculation and density functional theory (DFT) calculations. Therefore, only light with a wavelength of 254 nm was able to induce the first three excited states of BPA, forming the electron transition type of n → π* from O atom to a single benzene ring and π → π* in the single benzene ring. Indirect oxidation by ·OH occurred as it preferentially attacked the C6 atom in BPA ring A. Moreover, the energy required for photo-excited degradation was about twofold than that of ·OH electrophilic addition reactions.

Photodegradation of oxytetracycline by UV-assisted persulfate and percarbonate processes: kinetics, influencing factors, anion effect, and radical species

In this study, the performance of ultraviolet (UV)-assisted persulfate (PS) and percarbonate (PC) oxidation processes in oxytetracycline (OTC) removal was investigated. UVC lamps were used for the photolysis process and the effect of operating parameters (initial pH, oxidant dose, initial OTC concentration, UV intensity) on OTC removal efficiency was determined. Control experiments were carried out at pH 5.5 and 32 W UV power for 60 min by adding a 4 mM oxidant with 10 mg/L initial OTC concentration. The OTC removal efficiency obtained as a result of only photolysis was 17.3% and the removal efficiency obtained by PS and PC oxidation alone was 18.3% and 12.7%, respectively. The OTC removal efficiencies increased in the combined processes and reached 58.1% and 69.9% for the UV-PS and UV-PC processes, respectively. The reaction rates of the processes were ranked as UV-PC > UV-PS > PS > UV > PC. In the UV-PS and UV-PC processes, the highest removal efficiencies were achieved at alkaline pH values. The OTC removal efficiency was increased with the increase in oxidant dose; however, the efficiency decreased after a certain dose due to the scavenging effect. The removal efficiency also increased as the initial OTC concentration decreased. The UV intensity had a positive effect on OTC removal efficiency. The effect of the water matrix on OTC removal efficiency was investigated while the dominant radical types were determined in UV-assisted processes. The EE/O values for the UV-PS and UV-PC processes were calculated as 211 kWh/m³ and 153 kWh/m³, respectively for 60 min of reaction time. Although similar removal efficiencies were obtained with both UV-assisted processes, the UV-PC process steps forward in terms of being a novel, environmentally friendly, more economic, and promising technology for OTC removal.

Smart biomaterials for enhancing cancer therapy by overcoming tumor hypoxia: a review

Hypoxia is a distinctive feature of most solid tumors due to insufficient oxygen supply of the abnormal vasculature, which cannot work with the demands of the fast proliferation of cancer cells. One of the main obstacles to limiting the efficacy of cancer medicines is tumor hypoxia. Thus, oxygen is a vital parameter for controlling the efficacy of different types of cancer therapy, such as chemotherapy (CT), photodynamic therapy (PDT), photothermal therapy (PTT), immunotherapy (IT), and radiotherapy (RT). Numerous technologies have attracted much attention for enhancing oxygen distribution in humans and improving the efficacy of cancer treatment. Such technologies include treatment with hyperbaric oxygen therapy (HBO), delivering oxygen by polysaccharides (e.g., cellulose, gelatin, alginate, and silk) and other biocompatible synthetic polymers (e.g., PMMA, PLA, PVA, PVP and PCL), decreasing oxygen consumption, producing oxygen in situ in tumors, and using polymeric systems as oxygen carriers. Herein, this review provides an overview of the relationship between hypoxia in tumor cells and its role in the limitation of different cancer therapies alongside the numerous strategies for oxygen delivery using polysaccharides and other biomaterials as carriers and for oxygen generation.

Generality and diversity on the kinetics, toxicity and DFT studies of sulfate radical-induced transformation of BPA and its analogues

The international campaign to ban bisphenol A (BPA) has resulted in increasing application of BPA substitutes. However, investigations have mainly been confined to the removal of single contaminant from the water, resulting in an inefficient burden. Furthermore, systematic study and synthetical discussion of bisphenol analogues (BPs) kinetics and transformation pathways were largely underemphasized. Chemical oxidation of BPA and four typical alternatives (i.e., bisphenol AF, bisphenol E, bisphenol F and bisphenol S) in a UV-activated persulfate system was examined in this study. The effects of persulfate (PS) dosage, pH and water matrix constituents (i.e., bicarbonate, chloride and natural organic matter) were comprehensively examined using a combination of laboratory experiments and mathematical modeling. According to our findings, the removal characteristics of different BPs employing SO₄•^--induced removal technology, including degradation mechanisms and influencing trends by water matrix, revealed similarly. The second order-rate constants of SO₄•^- reacting with BPs served as the main variables mediating the variation in degradation kinetics. Frontier molecular orbital theory and density functional theory suggested BPs molecules possessed the same susceptible positions to free radicals. In the UV-activated PS process, transformation pathways included hydroxylation, electron-transfer, substitution, and rearrangement triggered by ortho-cleavage, with certain intermediates exhibiting higher toxicity than the parent chemicals. The findings of this study provided valuable information to estimate potential environmental risks of using BPA alternatives.

Humic Acid Removal in Water via UV Activated Sodium Perborate Process

Humic acid (HA) has complex molecular structure and is capable of adsorption, ion exchange, and chelation with organic and inorganic pollutants in water bodies, worsening water quality and jeopardizing human health and ecological environment. How to effectively remove HA from water is one of the research focuses of this paper. In this study, the UV-activated sodium perborate (SPB) synergistic system (UV/SPB) was established to eliminate HA in water. The effects of initial HA concentration, SPB dose, and initial pH value on the HA elimination were determined, and the main mechanisms of the synergy and HA degradation were explored. The outcomes show that the HA elimination ratio by the sole UV and only SPB system were only 0.5% and 1.5%, respectively. The HA removal of UV/SPB reached 88.8%, which can remove HA more effectively than other systems. Free radical masking experiment proved that hydroxyl radical produced by SPB activation is the main active substance for HA removal. The results of UV-vis absorption spectrum, absorbance ratio, specific UV absorbance, and excitation–emission matrix spectroscopy verified that the UV/SPB system can effectively decompose and mineralize HA.

Sodium Percarbonate Activation by Plasma-Generated Ozone for Catalytic Degradation of Dye Wastewater: Role of Active Species and Degradation Process

In this paper, sodium percarbonate (SPC) was activated by ozone (O3) from plasma for catalytic treatment of dye wastewater. Methyl blue (MB), a typical industrial dye, was selected as the target dye contaminant. Results showed that enhancing O3 dosage and reducing MB concentration were beneficial to MB degradation. Compared to acid condition, a higher removal efficiency of MB was obtained in alkaline condition. With an increase of SPC dosage, the removal efficiency of MB first was raised, and then it declined. Under the optimal dosage of 50 mg/L, the removal efficiency of MB reached 85.7% with 30 min treatment time. The energy efficiency was improved from 5.21 g/kWh to 5.71 g/kWh. A synergetic effect can be established between O3 and SPC. Radical capture experiments verified that ·OH, ·O2−, 1O2, and ·CO3− played important parts in MB degradation. With increasing reaction time, the amount of total organic carbon (TOC) declined and the amount of ammonia nitrogen (NH3-N) increased. The addition of SPC enhanced the solution’s pH value and conductivity. The degradation pathway was proposed based on density functional theory (DFT) analysis and relevant literatures. The toxicity of MB was alleviated after O3/SPC treatment. The O3/SPC process was also suitable for the treatment of other dyes and actual wastewater.

Degradation of bisphenol A by UV/persulfate process in the presence of bromide: Role of reactive bromine

Bromide (Br^-), a ubiquitous species in natural water, is capable of reacting with sulfate radical (SO₄∙^-) and hydroxyl radical (∙OH) to form secondary reactive bromine species (RBS). The reaction routes can influence the degradation mechanisms and performance of these radicals for removal of target pollutants and may also form harmful bromine-containing disinfection by-products (Br-DBPs) during subsequent chlorination. In the present research, the UV-activated persulfate (PS) degradation of bisphenol A (BPA) was systematically examined in the presence of Br^-. Results indicated that the presence of Br^-enhanced the BPA degradation and both UV/PS and UV/PS/Br^- processes followed the pseudo-first-order kinetics. At 0-0.8 mM Br^-, 0.2 mM Br^- exerted the best enhanced effect on BPA degradation, while RBS functioned as the major contributor in the presence of 0.05-0.5 mM Br^-. Solution pH (6.0-8.0) barely affected the BPA degradation in the UV/PS system, but the introduction of Br^- augmented the pH dependence. In the UV/PS/Br^-system, the reaction rate constant of BPA increased/decreased with increasing PS/HA dosage, and was affected slightly in the presence of bicarbonate and chloride. According to the quantum chemical calculation, the second-order rate constants of BPA with ∙OH, SO₄∙^-, Br∙ and Br₂∙^- were calculated as 7.65 × 10¹⁰, 1.67 × 10⁹, 1.77 × 10⁸ and 2.83 × 10² M^-1 s^-1, respectively. Additionally, three degradation pathways of BPA were proposed based on DFT calculation and HPLC/MS analysis, and the formed bromine-containing products exhibited higher toxicity than BPA. Br-DBPs, particularly tribromomethane and tribromoacetic acid, generated from UV/PS/Br^-pre-oxidation during BPA chlorination significantly increased the toxicity of total DBPs.

Degradation of organophosphorus flame retardants in heterogeneous photo-Fenton system driven by Fe(III)-based metal organic framework: Intermediates and their potential interference on bacterial metabolism

Organophosphorus flame retardants (OPFRs) have been regarded as one of the most rebarbative classes of emerging contaminants due to their persistence and toxicity. In the current study, Fe-based metal organic framework (MIL-88A) was synthesized and employed as photo-Fenton catalyst for the degradation of tris-(2-chloroisopropyl) phosphate (TCPP), a typical representative of OPFRs. The observations indicated that visible light could boost the reduction of ≡Fe^III to ≡Fe^II in Fe-O clusters of MIL-88A during the photo-Fenton system and consequently induce the transformation of H₂O₂ to OH, which realized efficient degradation of TCPP. Due to the excellent function of MIL-88A, the effective pH application range of photo-Fenton system was extended in comparison with traditional Fenton system. The degradation efficiency of TCPP was visibly influenced in presence of humic acid (HA). MIL-88A exhibited a commendable reusability and stability after 3 times cycle. As the photo-Fenton reaction proceeded, TCPP was disintegrated to several kinds of carboxylated, dechlorinated and hydroxylated products. The observations of metabolomics endorsed that the interference of intermediate products mixture on E. coli weakened to a certain extent. In conclusion, carboxylation, dechlorination, hydroxylation and oxidation of TCPP were likewise effective for its detoxification, revealing that heterogeneous photo-Fenton system driven by Fe-based metal organic framework will be an attractive and safe treatment technique for OPFRs control.

Coupling sodium percarbonate (SPC) oxidation and coagulation for membrane fouling mitigation in algae-laden water treatment

To alleviate algal fouling in membrane water treatment processes, conventional technologies such as coagulation with poly aluminum chloride (PACl) has been widely adopted by many drinking water treatment plants. However, coagulation alone exhibited relatively weak removal effect for algal pollutants, and the coagulant residues due to the excess dosage also raised concerns. Thus, a novel process of coupling sodium percarbonate (SPC) oxidation and PACl coagulation was proposed, integrated with membrane filtration for algae-laden water treatment. The dosages of PACl and SPC were optimized, and the SPC dosing strategies were systematically compared. The changes in the characteristics of algal pollutants were investigated, and the results revealed that the resistance of algal foulants to aggregation was decreased, and the particle size of algal foulants became larger. With the synergism of coagulation and oxidation, the degradation of fluorescent organics was strengthened, and macromolecular biopolymers were decomposed into low molecular weight organics. The fouling control efficiency was further explored, and the results indicated that both irreversible and reversible fouling were effectively controlled, among which PACl/SPC (simultaneous treatment) performed best with the irreversible fouling reduced by 90.5%, while the efficiency of SPC-PACl (SPC followed by PACl) was relatively lower (57.3%). The fouling mechanism was altered by slowing the formation of cake filtration, and the reduction of algal cells played a more important role for the fouling alleviation. The interface properties of contaminated membranes (i.e., functional groups, images, and micromorphology) were characterized, and the efficiency of the proposed strategy was further verified. The proposed strategy exhibits great application values for improving membrane performance during algae-laden water treatment.

A review on percarbonate-based advanced oxidation processes for remediation of organic compounds in water

Sodium percarbonate (SPC) is considered a potential alternative to liquid hydrogen peroxide (H₂O₂) in organic compounds contaminated water/soil remediation due to its regularly, transportable, economical, and eco-friendly features. The solid state of SPC makes it more suitable to remediate actual soil and water with a milder H₂O₂ release rate. Apart from its good oxidative capacity, alkaline SPC can simultaneously remediate acidized solution and soil to the neutral condition. Conventionally, percarbonate-based advanced oxidation process (P-AOPs) system proceed through the catalysis under ultraviolet ray, transition metal ions (i.e., Fe²⁺, Fe³⁺, and V⁴⁺), and nanoscale zero-valent metals (iron, zinc, copper, and nickel). The hydroxyl radical (^•OH), superoxide radical (^•O₂^-), and carbonate radical anion (^•CO₃^-) generated from sodium percarbonate could attack the organic pollutant structure. In this review, we present the advances of P-AOPs in heterogeneous and homogeneous catalytic processes through a wide range of activation methods. This review aims to give an overview of the catalysis and application of P-AOPs for emerging contaminants degradation and act as a guideline of the field advances. Various activation methods of percarbonate are summarized, and the influence factors in the solution matrix such as pH, anions, and cations are thoroughly discussed. Moreover, this review helps to clarify the advantages and shortcomings of P-AOPs in current scientific progress and guide the future practical direction of P-AOPs in sustainable carbon catalysis and green chemistry.