Riverine microplastic and microbial community compositions: A field study in the Netherlands

Distribution characteristics and integrated ecological risks evaluation modelling of microplastics and heavy metals in geological high background soil

The microplastics (MPs), a novel pollutant, and heavy metals (HMs) significantly affect soil ecology. The study investigated HMs and MPs in Qianxi's high geological background soil, established a model for risk evaluation with MPs types and shapes, and proposed a two-dimensional comprehensive index model for MPs-HMs combined pollution and risk evaluation criterion. The results revealed a high soil Cd concentration, with a mean value of 0.38 mg·kg-1. Additionally, soils from soybean-wheat intercropping-potato-corn rotation (SWI-PCR) exhibited significantly higher concentrations of Hg, As, and Pb compared with those from soybean-wheat intercropping-corn rotation (SWI-CR). Moreover, the soil exhibited a high abundance of MPs (8667.66 ± 3864.26 items·kg-1), mainly characterized by PS and fiber. The mean of adjusted ecological risk index (ARI) for MPs in soil was 525.27, indicating a grade 3 risk. The two-dimensional combined index (TPI) was used to assess the ecological risk of MPs-HMs combined pollution, exhibiting an exceedance rate of 56 % with a mean of 445.07. The risk level of the combined pollution was graded as 6, indicating high risk. The microplastic risk evaluation model and the comprehensive evaluation method of combined pollution established in this study provide a reference for the future risk evaluation of multi-pollutant combined pollution.

Significant regional disparities in riverine microplastics

Research on riverine microplastics has gradually increased, highlighting an area for further exploration: the lack of extensive, large-scale regional variations analysis due to methodological and spatiotemporal limitations. Herein, we constructed and applied a comprehensive framework for synthesizing and analyzing literature data on riverine microplastics to enable comparative research on the regional variations on a large scale. Research results showed that in 76 rivers primarily located in Asia, Europe, and North America, the microplastic abundance of surface water in Asian rivers was three times higher than that in Euro-America rivers, while sediment in Euro-American rivers was five times more microplastics than Asia rivers, indicating significant regional variations (p < 0.001). Additionally, based on the income levels of countries, rivers in lower-middle and upper-middle income countries had significantly (p < 0.001) higher abundance of microplastics in surface water compared to high-income countries, while the opposite was true for sediment. This phenomenon was preliminarily attributed to varying levels of urbanization across countries. Our proposed framework for synthesizing and analyzing microplastic literature data provides a holistic understanding of microplastic disparities in the environment, and can facilitate broader discussions on management and mitigation strategies.

Microbial communities change along the 300 km length of the Grand River for extreme high- and low-flow regimes

The Grand River watershed is the largest catchment in southern Ontario. The river's northern and southern sections are influenced by agriculture, whereas central regions receive wastewater effluent and urban runoff. To characterize in-river microbial communities, as they relate to spatial and environmental factors, we conducted two same-day sampling events along the entire 300 km length of the river, representing contrasting flow seasons (high flow spring melt and low flow end of summer). Through high-throughput sequencing of 16S rRNA genes, we assessed the relationship between river microbiota and spatial and physicochemical variables. Flow season had a greater impact on communities than spatial or diel effects and profiles diverged with distance between sites under both flow conditions, but low-flow profiles exhibited higher beta diversity. High-flow profiles showed greater species richness and increased presence of soil and sediment taxa, which may relate to increased input from terrestrial sources. Total suspended solids, dissolved inorganic carbon, and distance from headwaters significantly explained microbial community variation during the low-flow event, whereas conductivity, sulfate, and nitrite were significant explanatory factors for spring melt. This study establishes a baseline for the Grand River's microbial community, serving as a foundation for modeling the microbiology of anthropogenically impacted freshwater systems affected by lotic processes.

Insight into the bacterial community composition of the plastisphere in diverse environments of a coastal salt marsh

The microbial community colonized on microplastics (MPs), known as the 'plastisphere', has attracted extensive concern owing to its environmental implications. Coastal salt marshes, which are crucial ecological assets, are considered sinks for MPs. Despite their strong spatial heterogeneity, there is limited information on plastisphere across diverse environments in coastal salt marshes. Herein, a 1-year field experiment was conducted at three sites in the Yancheng salt marsh in China. This included two sites in the intertidal zone, bare flat (BF) and Spartina alterniflora vegetation area (SA), and one site in the supratidal zone, Phragmites australis vegetation area (PA). Petroleum-based MPs (polyethylene and expanded polystyrene) and bio-based MPs (polylactic acid and polybutylene succinate) were employed. The results revealed significant differences in bacterial community composition between the plastisphere and sediment at all three sites examined, and the species enriched in the plastisphere exhibited location-specific characteristics. Overall, the largest difference was observed at the SA site, whereas the smallest difference was observed at the BF site. Furthermore, the MP polymer types influenced the composition of the bacterial communities in the plastisphere, also exhibiting location-specific characteristics, with the most pronounced impact observed at the PA site and the least at the BF site. The polybutylene succinate plastisphere bacterial communities at the SA and PA sites were quite different from the plastispheres from the other three MP polymer types. Co-occurrence network analyses suggested that the bacterial community network in the BF plastisphere exhibited the highest complexity, whereas the network in the SA plastisphere showed relatively sparse interactions. Null model analyses underscored the predominant role of deterministic processes in shaping the assembly of plastisphere bacterial communities across all three sites, with a more pronounced influence observed in the intertidal zone than in the supratidal zone. This study enriches our understanding of the plastisphere in coastal salt marshes.

Selective microbial attachment to LDPE plastic beads during passage through the wastewater network

Urban wastewater treatment plants (WWTP) represent key point-source discharges of microplastics (MP) into the environment, however, little is known about the microbial carrying capacity of plastics travelling through them. The purpose of this study was to quantify the number of cells that become associated with MP at different locations within a WWTP, and to assess differences in microbiome communities. We conducted a field experiment incubating low density polyethylene (LDPE) MP beads in WWTP influent and effluent, as well as tracking free floating beads during passage in wastewater from a large municipal hospital to an urban WWTP, where they were subsequently recovered. Using two cell counting methods - automated flow cytometric true absolute cell counts and indirect cell quantification via protein content based on a model E. coli cell - we quantified cell attachment to LDPE beads. LDPE associated counts ranged from 350 x 103 cells cm-2 after incubation in wastewater effluent, and 990 x 103 cells cm-2 after incubation in wastewater influent. 16S rRNA gene amplicon sequencing was used to determine the bacterial community structure of the plastic-associated microbiomes. Our results showed that distinct bacterial communities developed on the LDPE MP following exposure to each wastewater type. Influent (untreated) wastewater LDPE-associated microbiomes were dominated by Bacillota whereas the microbes that attached in wastewater effluent (tertiary treated) were dominated by Pseudomonadota. In conclusion, this study provides clear evidence that microplastics migrating through the sewer network and WWTP rapidly accumulate microbiomes with unique microbial community structures varying from sewage influent to effluent. These findings demonstrate the differential microbiological risk from MP associated with routine wastewater discharges to those released from intermittent combined sewer overflows (CSOs) during storm events.

Undisclosed contribution of microbial assemblages selectively enriched by microplastics to the sulfur cycle in the large deep-water reservoir

The accumulation of microplastics in reservoirs due to river damming has drawn considerable attention due to their potential impacts on elemental biogeochemical cycling at the watershed scale. However, the effects of plastisphere communities on the sulfur cycle in the large deep-water reservoir remain poorly understood. Here, we collected microplastics and their surrounding environmental samples in the water and sediment ecosystems of Xiaowan Reservoir and found a significant spatiotemporal pattern of microplastics and sulfur distribution in this Reservoir. Based on the microbial analysis, plastic-degrading taxa (e.g., Ralstonia, Rhodococcus) involved in the sulfur cycle were enriched in the plastisphere of water and sediment, respectively. Typical thiosulfate oxidizing bacteria Limnobacter acted as keystone species in the plastisphere microbial network. Sulfate, oxidation reduction potential and organic matter drove the variations of the plastisphere. Environmental filtration significantly affected the plastisphere communities, and the deterministic process dominated the community assembly. Furthermore, predicted functional profiles related to sulfur cycling, compound degradation and membrane transport were significantly enriched in the plastisphere. Overall, our results suggest microplastics as a new microbial niche exert different effects in water and sediment environments, and provide insights into the potential impacts of the plastisphere on the sulfur biogeochemical cycle in the reservoir ecosystem.

Microplastics pollution in the Surma River, Bangladesh: A rising hazard to upstream water quality and aquatic life

The ecological health of freshwater rivers is deteriorating globally due to careless human activities, for instance, the emission of plastic garbage into the river. The current research was the first assessment of microplastics (MPs) pollution in water, sediment, and representative organisms (fish, crustacean, and bivalve) from the Surma River. Water, sediment, and organisms were sampled from six river sites (Site 1: Charkhai; Site 2: Golapganj; Site 3: Alampur; Site 4: Kazir Bazar; Site 5: Kanishail and Site 6: Lamakazi), and major water quality parameters were recorded during sampling. Thereafter, MPs in water, sediment, and organism samples were extracted, and then microscopically examined to categorize selected MPs types. The abundance of MPs, as well as size, and color distribution, were estimated. Polymer types were analyzed by ATR-FTIR, the color loss of MPs was recorded, the Pollution Load Index (PLI) was calculated, and the relationship between MPs and water quality parameters was analyzed. Sites 4 and 5 had comparatively poorer water quality than other sites. Microplastic fibers, fragments, and microbeads were consistently observed in water, sediment, and organisms. A substantial range of MPs in water, sediment, and organisms (37.33-686.67 items/L, 0.89-15.12 items/g, and 0.66-48.93 items/g, respectively) was recorded. There was a diverse color range, and MPs of <200 μm were prevalent in sampling areas. Six polymer types were identified by ATR-FTIR, namely Polyethylene (PE), Polyamide (PA), Polypropylene (PP), Cellulose acetate (CA), Polyethylene terephthalate (PET), and Polystyrene (PS), where PE (41%) was recognized as highly abundant. The highest PLI was documented in Site 4 followed by Site 5 both in water and sediment. Likewise, Sites 4 and 5 were substantially different from other study areas according to PCA. Overall, the pervasiveness of MPs was evident in the Surma River, which requires further attention and prompt actions.

Comparison of the Effects of LDPE and PBAT Film Residues on Soil Microbial Ecology

The plastic film is extensively applied with limited recycling, leading to the long-run residue accumulation in soil, which offers a distinctive habitat for microorganisms, and creates a plastisphere. In this study, traditional low-density polyethylene (LDPE) plastic film and biodegradable polybutylene adipate terephthalate (PBAT) plastic film materials were selected to test their effects on soil microbial ecology. Based on high-throughput sequencing, compared to the soil environment, the alpha-diversity of bacterial communities in plastisphere was lower, and the abundance of Actinobacteria increased. Plastic film residues, as bacterial habitats, exhibited greater heterogeneity and harbor unique bacterial communities. The communities were distinguished between plastisphere and soil environment by means of a random-forest (RF) machine-learning model. Prominent distinctions emerged among bacterial functions between soil environment and plastisphere, especially regarding organics degradation. The neutral model and null model indicated that the constitution of bacterial communities was dominated by random processes except in LDPE plastisphere. The bacterial co-occurrence network of the plastisphere exhibited higher complexity and modularity. This study contributes to our comprehending of characteristics of plastisphere bacterial communities in soil environment and the associated ecological risks of plastic film residues accumulation.

Microbial community and antimicrobial resistance niche differentiation in a multistage, surface flow constructed wetland

Free-living (FL) and particulate-associated (PA) communities are distinct bacterioplankton lifestyles with different mobility and dissemination routes. Understanding spatio-temporal dynamics of PA and FL fractions will allow improvement to wastewater treatment processes including pathogen and AMR bacteria removal. In this study, PA, FL and sediment community composition and antimicrobial resistance gene (ARG; tetW, ermB, sul1, intI1) dynamics were investigated in a full-scale municipal wastewater free-water surface polishing constructed wetland. Taxonomic composition of PA and FL microbial communities shifted towards less diverse communities (Shannon, Chao1) at the CW effluent but retained a distinct fraction-specific composition. Wastewater treatment plant derived PA communities introduced the bulk of AMR load (70 %) into the CW. However, the FL fraction was responsible for exporting over 60 % of the effluent AMR load given its high mobility and the effective immobilization (1-3 log removal) of PA communities. Strong correlations (r2>0.8, p < 0.05) were observed between the FL fraction, tetW and emrB dynamics, and amplicon sequence variants (ASVs) of potentially pathogenic taxa, including Bacteroides, Enterobacteriaceae, Aeromonadaceae, and Lachnospiraceae. This study reveals niche differentiation of microbial communities and associated AMR in CWs and shows that free-living bacteria are a primary escape route of pathogenic and ARG load from CWs under low-flow hydraulic conditions.

Microbial communities colonising plastics during transition from the wastewater treatment plant to marine waters

BACKGROUND

Plastics pollution and antimicrobial resistance (AMR) are two major environmental threats, but potential connections between plastic associated biofilms, the 'plastisphere', and dissemination of AMR genes are not well explored.

RESULTS

We conducted mesocosm experiments tracking microbial community changes on plastic surfaces transitioning from wastewater effluent to marine environments over 16 weeks. Commonly used plastics, polypropylene (PP), high density polyethylene (HDPE), low density polyethylene (LDPE) and polyethylene terephthalate (PET) incubated in wastewater effluent, river water, estuarine water, and in the seawater for 16 weeks, were analysed via 16S rRNA gene amplicon and shotgun metagenome sequencing. Within one week, plastic-colonizing communities shifted from wastewater effluent-associated microorganisms to marine taxa, some members of which (e.g. Oleibacter-Thalassolituus and Sphingomonas spp., on PET, Alcanivoracaceae on PET and PP, or Oleiphilaceae, on all polymers), were selectively enriched from levels undetectable in the starting communities. Remarkably, microbial biofilms were also susceptible to parasitism, with Saprospiraceae feeding on biofilms at late colonisation stages (from week 6 onwards), while Bdellovibrionaceae were prominently present on HDPE from week 2 and LDPE from day 1. Relative AMR gene abundance declined over time, and plastics did not become enriched for key AMR genes after wastewater exposure.

CONCLUSION

Although some resistance genes occurred during the mesocosm transition on plastic substrata, those originated from the seawater organisms. Overall, plastic surfaces incubated in wastewater did not act as hotspots for AMR proliferation in simulated marine environments.

Freshwater plastisphere: a review on biodiversity, risks, and biodegradation potential with implications for the aquatic ecosystem health

The plastisphere, a unique microbial biofilm community colonizing plastic debris and microplastics (MPs) in aquatic environments, has attracted increasing attention owing to its ecological and public health implications. This review consolidates current state of knowledge on freshwater plastisphere, focussing on its biodiversity, community assembly, and interactions with environmental factors. Current biomolecular approaches revealed a variety of prokaryotic and eukaryotic taxa associated with plastic surfaces. Despite their ecological importance, the presence of potentially pathogenic bacteria and mobile genetic elements (i.e., antibiotic resistance genes) raises concerns for ecosystem and human health. However, the extent of these risks and their implications remain unclear. Advanced sequencing technologies are promising for elucidating the functions of plastisphere, particularly in plastic biodegradation processes. Overall, this review emphasizes the need for comprehensive studies to understand plastisphere dynamics in freshwater and to support effective management strategies to mitigate the impact of plastic pollution on freshwater resources.

Analysing micro- and nanoplastics with cutting-edge infrared spectroscopy techniques: a critical review

The escalating prominence of micro- and nanoplastics (MNPs) as emerging anthropogenic pollutants has sparked widespread scientific and public interest. These minuscule particles pervade the global environment, permeating drinking water and food sources, prompting concerns regarding their environmental impacts and potential risks to human health. In recent years, the field of MNP research has witnessed the development and application of cutting-edge infrared (IR) spectroscopic instruments. This review focuses on the recent application of advanced IR spectroscopic techniques and relevant instrumentation to analyse MNPs. A comprehensive literature search was conducted, encompassing articles published within the past three years. The findings revealed that Fourier transform infrared (FTIR) spectroscopy stands as the most used technique, with focal plane array FTIR (FPA-FTIR) representing the cutting edge in FTIR spectroscopy. The second most popular technique is quantum cascade laser infrared (QCL-IR) spectroscopy, which has facilitated rapid analysis of plastic particles. Following closely is optical photothermal infrared (O-PTIR) spectroscopy, which can furnish submicron spatial resolution. Subsequently, there is atomic force microscopy-based infrared (AFM-IR) spectroscopy, which has made it feasible to analyse MNPs at the nanoscale level. The most advanced IR instruments identified in articles covered in this review were compared. Comparison metrics encompass substrates/filters, data quality, spatial resolution, data acquisition speed, data processing and cost. The limitations of these IR instruments were identified, and recommendations to address these limitations were proposed. The findings of this review offer valuable guidance to MNP researchers in selecting suitable instrumentation for their research experiments, thereby facilitating advancements in research aimed at enhancing our understanding of the environmental and human health risks associated with MNPs.

Revealing the characteristics of biofilms on different polypropylene plastic products: Comparison between disposable masks and takeaway boxes

The increasingly severe plastic pollution issue was intensified by the enormous plastic emissions into ecosystems during the Covid-19 pandemic. Plastic wastes entering the environment were swiftly exposed to microorganisms and colonized by biofilms, and the plastic-biofilm combined effects further influenced the ecosystem. However, the non-woven structure of disposable masks discarded carelessly during the COVID-19 pandemic was different from those of plastics with flat surface. To reveal the potential effects of plastic structure on colonized biofilms, white disposable surgical masks (DM) and transparent takeaway boxes (TB), both made of polyethylene, were selected for the incubation of organic conditioning films and biofilms. The results indicated that the non-woven structure of disposable mask was destroyed by the influence of water infiltration and biofilm colonization. The influence of surface structure on conditioning films led to a relatively higher proportion of tryptophan-like substances on DM than those on TB samples. Therefore, biofilms with significantly higher microbial biomass and carbon metabolic capacity were formed on DM than those on TB samples owing to the combined effects of their differences in surface structure and conditioning films. Moreover, abundant functional microorganisms associated with stress tolerance, carbon metabolism and biofilm formation were observed in biofilms on disposable mask. Combining with the results of partial least squares regression analysis, the selective colonization of functional microorganisms on disposable masks with uneven surface longitudinal fluctuation was revealed. Although the predicted functions of biofilms on disposable masks and takeaway boxes showed more similarity to each other than to those of free-living aquatic microorganisms owing to the existence of the plastisphere, biofilms on disposable masks may potentially trigger environmental risks different from those of takeaway boxes by unique carbon metabolism and abundant biomass.

Optimization of microplastic removal based on the complementarity of constructed wetland and microalgal-based system

As one of the emblematic emerging contaminants, microplastics (MPs) have aroused great public concern. Nevertheless, the global community still insufficiently acknowledges the ecological health risks and resolution strategies of MP pollution. As the nature-based biotechnologies, the constructed wetland (CW) and microalgal-based system (MBS) have been applied in exploring the removal of MPs recently. This review separately presents the removal research (mechanism, interactions, implications, and technical defects) of MPs by a single method of CWs or MBS. But one thing with certitude is that the exclusive usage of these techniques to combat MPs has non-negligible and formidable challenges. The negative impacts of MP accumulation on CWs involve toxicity to macrophytes, substrates blocking, and nitrogen-removing performance inhibition. While MPs restrict MBS practical application by making troubles for separation difficulties of microalgal-based aggregations from effluent. Hence the combined strategy of microalgal-assisted CWs is proposed based on the complementarity of biotechnologies, in an attempt to expand the removing size range of MPs, create more biodegradable conditions and improve the effluent quality. Our work evaluates and forecasts the potential of integrating combination for strengthening micro-polluted wastewater treatment, completing the synergistic removal of MP-based co-pollutants and achieving long-term stability and sustainability, which is expected to provide new insights into MP pollution regulation and control.

Microplastics shape microbial interactions and affect the dissemination of antibiotic resistance genes in different full-scale wastewater treatment plants

Wastewater treatment plants (WWTPs) pose a potential threat to the environment because of the accumulation of antibiotic resistance genes (ARGs) and microplastics (MPs). However, the interactions between ARGs and MPs, which have both indirect and direct effects on ARG dissemination in WWTPs, remain unclear. In this study, spatiotemporal variations in different types of MPs, ten ARGs (sul1, sul2, tetA, tetO, tetM, tetX, tetW, qnrS, ermB, and ermC), class 1 integron integrase (intI1) and transposon Tn916/1545 in three typical WWTPs were characterized. Sul1, tetO, and sul2 were the predominant ARGs in the targeted WWTPs, whereas the intI1 and transposon Tn916/1545 were positively correlated with most of the targeted ARGs. Saccharimonadales (4.15 %), Trichococcus (2.60 %), Nitrospira (1.96 %), Candidatus amarolinea (1.79 %), and SC-I-84 (belonging to phylum Proteobacteria) (1.78 %) were the dominant genera. Network and redundancy analyses showed that Trichococcus, Faecalibacterium, Arcobacter, and Prevotella copri were potential hosts of ARGs, whereas Candidatus campbellbacteria and Candidatus kaiserbacteria were negatively correlated with ARGs. The potential hosts of ARGs had a strong positive correlation with polyethylene terephthalate, silicone resin, and fluor rubber and a negative correlation with polyurethane. Candidatus campbellbacteria and Candidatus kaiserbacteria were positively correlated with polyurethane, whereas potential hosts of ARGs were positively correlated with polypropylene and fluor rubber. Structural equation modeling highlighted that intI1, transposon Tn916/1545 and microbial communities, particularly microbial diversity, dominated the dissemination of ARGs, whereas MPs had a significant positive correlation with microbial abundance. Our study deepens the understanding of the relationships between ARGs and MPs in WWTPs, which will be helpful in designing strategies for inhibiting ARG hosts in WWTPs.

Depth significantly affects plastisphere microbial evenness, assembly and co-occurrence pattern but not richness and composition

Microplastics have become one of the hot concerns of global marine pollution. In recent years, diversity and abiotic influence factors of plastisphere microbial communities were well documented, but our knowledge of their assembly mechanisms and co-occurrence patterns remains unclear, especially the effects of depth on them. Here, we collected microorganisms on microplastics to investigate how ocean depth affects on microbial diversity, community composition, assembly processes and co-occurrence patterns. Our results indicated that there were similar microbial richness and community compositions but microbial evenness and unique microbes were obviously different in different ocean layers. Our findings also demonstrated that deterministic processes played dominant roles in the assembly of the mesopelagic plastisphere microbial communities, while the bathypelagic microbial community assembly was mainly shaped by stochastic processes. In addition, the co-occurrence networks suggested that the relationships between microorganisms in the mesopelagic layer were more complex and stable than those in the bathypelagic layer. Simultaneously, we also found that Proteobacteria and Actinobacteriota were the most abundant keystones which played important roles in microbial co-occurrence networks at both layers. This study enhanced our understanding of microbial diversity, assembly mechanism, and co-occurrence pattern on plastisphere surfaces, and provided useful insights into microorganisms capable of degrading plastics and microbial remediation.

Spatial distribution and vertical characteristics of microplastics in the urban river: The case of Qinhuai River in Nanjing, China

Microplastics (MPs) are emerging as global environmental pollutants, significantly influencing the safety of city rivers. This study investigated six sampling sites in the Qinhuai River of Nanjing, which explored the distribution and characteristics of MPs and the microbial structure in 2023. The studied river contained various levels of MPs with average concentrations of 667.68 items/L, whose abundance firstly decreased midstream and then increased downstream. The MPs abundance upstream was higher in surface water column, microplastics midstream and downstream accumulated more in deep water column. Black and blue are prevalent in the color distribution, while the polymers of PC, PP and PS changed with increasing depth, with a proportion of 74 % ∼ 97 % in the dominant shapes of granules. Furthermore, the water with higher MPs may stimulate the growth of MPs-related bacteria in sediments, including the genus of Pseudoxanthomonas and Dechloromonas. Our research will provide constructive support for enhancing urban river management strategies.

Effect of bioturbation of the mitten crab on distribution of tire wear particles and their combined effect on sediment ecosystem

Tire wear particles (TWPs) are a major source of environmental microplastic pollution which gradually settle and accumulate in sediments after entering the aquatic environment, which can affect the behaviors of benthic organisms. Bioturbation of benthic species could affect the fate, impacts and potential risks of TWPs by altering the properties and structure of sediments. Therefore, in this study, the effect of TWPs on the burrowing activity of Chinese mitten crab (Eriocheir sinensis) was investigated. In addition, the effects of crab bioturbation on the distribution of TWPs and their additives were studied. The combined effects of TWPs and crab bioturbation on the microbial communities in the sediments were also explored. The results of this study showed that both TWPs and the leachate significantly inhibited the burrowing activity of crabs. TWPs in the surface layer of sediments were re-distributed by crab bioturbation and enriched mainly in the sediments near the burrow walls. Meanwhile, the heavy metals (i.e., Zn, Ca, Mg, Ba and Al) used as additives during the tire production in the burrow walls significantly increased as the accumulation of TWPs near burrow walls. In this study, TWP exposure decreased the bacterial diversity and abundance, as well as the functional genes related to carbon and nitrogen cycling process, but crab bioturbation increased them in the sediments of burrow walls by constructing a unique habitat. However, after TWPs entering into burrows, they were significantly decreased in the sediments near the burrow walls like the effects of TWPs, suggesting the negative effects of TWPs could play a dominant role in this combined system. Overall, this study is important for evaluating the distribution and effects of TWP pollution in the sediment ecosystem under biological factors such as bioturbation.

Distinct microbial communities degrade cellulose diacetate bioplastics in the coastal ocean

IMPORTANCE

Cellulose diacetate (CDA) is a promising alternative to conventional plastics due to its versatility in manufacturing and low environmental persistence. Previously, our group demonstrated that CDA is susceptible to biodegradation in the ocean on timescales of months. In this study, we report the composition of microorganisms driving CDA degradation in the coastal ocean. We found that the coastal ocean harbors distinct bacterial taxa implicated in CDA degradation and these taxa have not been previously identified in prior CDA degradation studies, indicating an unexplored diversity of CDA-degrading bacteria in the ocean. Moreover, the shape of the plastic article (e.g., a fabric, film, or foam) and plasticizer in the plastic matrix selected for different microbial communities. Our findings pave the way for future studies to identify the specific species and enzymes that drive CDA degradation in the marine environment, ultimately yielding a more predictive understanding of CDA biodegradation across space and time.

Advances on micro/nanoplastics and their effects on the living organisms: A review

Micro/nanoplastics (MPs) are attracting increasing attention owing to the potential threats they pose to the sustainability of the environment and the health of living organisms. Thus, a comprehensive understanding of the influence of MPs on living organisms is vital for developing countermeasures. We conducted an extensive literature search to retrieve the articles related to MPs via the Web of Science. Accordingly, 152 articles published in the last decade and in influential journals were selected to analyze the effects of MPs on plants, animals, microorganisms, and humans as well as the current status, hotspots, and trends of studies on MPs. The results showed that owing to the special characteristics of MPs and anthropogenic activities, MPs have become ubiquitous worldwide. MPs are ingested by plants and animals and enter the human body through various pathways, resulting in numerous adverse effects, such as growth inhibition, oxidative stress, inflammation, organ damage, and germ cell lesions. Moreover, they affect microorganisms by reshaping the structure and function of microbial communities and changing the spread pathway. However, microorganisms can also contribute to the degradation of MPs. With increasing evidence of the adverse effects of MPs on biota, coping with MP pollution and mitigating harmful outcomes have emerged as major challenges. This review focuses on (1) the main effects of MPs on living organisms, ranging from microorganisms to humans, (2) the current status and hotspots of studies related to MPs, and (3) the challenges and prospects of further studies on MPs.

Interplay Between Antimicrobial Resistance and Global Environmental Change

Antibiotic resistance genes predate the therapeutic uses of antibiotics. However, the current antimicrobial resistance crisis stems from our extensive use of antibiotics and the generation of environmental stressors that impose new selective pressure on microbes and drive the evolution of resistant pathogens that now threaten human health. Similar to climate change, this global threat results from human activities that change habitats and natural microbiomes, which in turn interact with human-associated ecosystems and lead to adverse impacts on human health. Human activities that alter our planet at global scales exacerbate the current resistance crisis and exemplify our central role in large-scale changes in which we are both protagonists and architects of our success but also casualties of unanticipated collateral outcomes. As cognizant participants in this ongoing planetary experiment, we are driven to understand and find strategies to curb the ongoing crises of resistance and climate change.

Plastisphere characterization in habitat of the highly endangered Shinisaurus crocodilurus: Bacterial composition, assembly, function and the comparison with surrounding environment

Plastisphere is a new niche for microorganisms that complicate the ecological effects of plastics, and may profoundly influence biodiversity and habitat conservation. The DaGuishan National Nature Reserve, one of the largest habitats of the highly endangered crocodile lizard (Shinisaurus crocodilurus), is experiencing plastic pollution without sufficient attention. Here, plastisphere collected from captive tanks of crocodile lizards in this nature reserve was characterized for the first time. Three types of plastic (PE-PP, PE1, and PE2) together with the surrounding water and soil samples, were collected, and 16S rRNA sequencing technology was used to characterize the bacterial composition. The results demonstrated that plastisphere was driven by stochastic process and had a distinct bacterial community with higher diversity than that in surrounding water (p < 0.05). Bacteria related to nitrogen and carbon cycles (Pseudomonas psychrotolerans, Methylobacterium-Methylorubrum) were more abundant in plastisphere than in water or soil (p < 0.05). More importantly, plastics recruited pathogens and those bacteria function in antibiotic resistant genes (ARGs) coding. Bacteria related to polymer degradation also proliferated in plastisphere, especially Bacillus subtilis with a fold change of 42.01. The PE2 plastisphere, which had the lowest diversity and was dominated by Methylobacterium-Methylorubrum differed from PE 1 and PE-PP plastispheres totally. Plastics' morphology and aquatic nutrient levels contributed to the heterogeneity of different plastispheres. Overall, this study demonstrated that plastispheres diversify in composition and function, affecting ecosystem services directly or indirectly. Pathogens and bacteria related to ARGs expression enriched in the plastisphere should not be ignored because they may threaten the health of crocodile lizards by increasing the risk of infection. Plastic pollution control should be included in conservation efforts for crocodile lizards. This study provides new insights into the potential impacts of plastisphere, which is important for ecological risk assessments of plastic pollution in the habitats of endangered species.

Microplastic characteristics and microplastic-heavy metal synergistic contamination in agricultural soil under different cultivation modes in Chengdu, China

Microplastics have significant implications for global ecosystems. The microplastic distribution, types, sources, and quantified microplastic-heavy metal synergistic pollution in agricultural soil in Chengdu, China were analyzed. The microplastics were detected in all soil samples collected from 103 sites, with concentrations ranging from 1333 to 15067 particle kg-1. The abundance of microplastics in grassland (12,667 ± 3394 particle kg-1) was more than twice higher than that in open field, vegetable field, orchard, and woodland. The main morphological types of microplastics included fibers, films, and granules (all "3-Dimensional" microplastics), with the colors red, blue, and transparent. Granular and fiber microplastics were predominantly in particles < 500 mm, while film microplastics were uniformly distributed at all sizes. The plastic compositions were mainly polypropylene and polyethylene plastics, accounting for 20.73% and 27.90% of the soil microplastic, respectively. Agricultural plastic applications and irrigation water were the sources of soil microplastics. The concentration of Cd, Cr, and Cu in the microplastics was strongly correlated with the corresponding concentration in the soils (p < 0.01), and the microplastic-heavy metal synergistic pollution might deteriorate the soil environment. The results of soil TOC measurements were influenced by microplastics in the soil. The results provide important data for the characteristics of microplastics in the agroecosystem.

Hydrostatic pressure drives microbe-mediated biodegradation of microplastics in surface sediments of deep reservoirs: Novel findings from hydrostatic pressure simulation experiments

Microplastics originate from the physical, chemical, or biological degradation of plastics in the environment. Once ingested by organisms at the bottom of the food chain, microplastics are passed on to organisms at higher trophic levels, posing a threat to human health. The distribution of microplastics and the metabolic pathways involved in their microbial degradation in surface sediments of drinking water reservoirs are still poorly understood. This study analyzed the occurrence patterns of microplastics and microbial community structure associated with microplastic biodegradation in surface sediments from a deep reservoir at various hydrostatic pressures. Based on the results of Fourier-transform and laser direct infrared spectroscopy, elevating the pressure resulted in altered sizes and shapes of microplastics in sediment samples with the presence of microorganisms. The influence of hydrostatic pressure on small-sized microplastics (20-500 μm) was pronounced. For instance, high pressure accelerated the breakdown of fibers, pellets, and fragments into smaller-sized microplastics. In particular, the mean size of polyethylene terephthalate microplastics decreased from 425.78 μm at atmospheric pressure to 366.62 μm at 0.7 Mpa. Metagenomic analysis revealed an increase in the relative abundances of plastic-degrading genera, such as Rhodococcus, Flavobacterium, and Aspergillus, in response to elevated pressures. Eight functional genes for biodegradation of polystyrene, polyethylene, and polyethylene terephthalate microplastics were annotated, including paaK, ladA, tphA3. Of these, tphA3 gene abundance was negatively influenced by hydrostatic pressure, providing direct evidence for the pathway by which microbial metabolism of polyethylene terephthalate led to decreased microplastic size under high pressure conditions. This study presents novel insights into hydrostatic pressure-driven microbial community structure, functional gene abundance, and key metabolic pathways associated with biodegradation of microplastics in reservoir sediments.

Homogenization of microplastics in alpine rivers: Analysis of microplastic abundance and characteristics in rivers of Qilian Mountain, China

Microplastics in remote areas has received increasing concern in recent years. However, studies on microplastics in alpine rivers and their affecting factors are still limited. In this study, we investigate the abundance and characteristics of microplastic in the surface water of five alpine rivers in Qilian Mountain, China. Utilizing sieve collection, digestion and density separation, along with microscopy and Raman spectroscopy analyses, microplastics were observed in all the water samples and the average abundance of microplastics was 0.48 ± 0.28 items/L, which was lower than in other freshwaters. Transparent (37.3%) and fibrous (72.1%) microplastics were predominant. Polypropylene (53.8%) was the most frequently identified polymer type. Analysis of similarities (ANOSIM) and linear discriminant analysis (LDA) based on microplastic shape, color, and polymer type showed that there was no significant difference in the microplastic characteristics among rivers of Qilian Mountain. The distance decay models revealed that the similarity in microplastics characteristics was not affected by changes in watershed characteristics, such as geographical distance, elevation, water quality, and land use. This finding suggests that the primary source of microplastics in Qilian Mountain rivers could be from dispersed origins. The results of this study indicated that despite remote alpine rivers suffering limited anthropogenic impacts, they were not immune to microplastics. However, in watersheds with lower intensity of human activity, the abundance and characteristics of microplastics in water bodies may be more uniformly distributed and controlled by diffusion conditions such as atmospheric transport or riverine transport. Our investigation unveils novel understanding of microplastic dispersion in secluded alpine territories, emphasizing the crucial need for managing atmospheric transport of microplastics within conservation areas.

Microplastic pollution and associated health hazards: Impact of COVID-19 pandemic

The COVID-19 pandemic led to an increase in plastic used for medical purposes such as personal protective equipment and packaging materials. A very low share of plastics is recycled while the majority is sent to landfills. This plastic may degrade over time to form microplastics which may pollute land, air, and water sources. An increase in microplastics can increase the disease risk in human well-being's. The ultimate fate of microplastic is accumulation inside the human body posing the risk of different health conditions like cancer, diabetes, and allergic reactions. Hence, proper detection and disposal methods should be devised to deal with the rise in microplastic pollution.

Impact of persistent rain on microplastics distribution and plastisphere community: A field study in the Pearl River, China

Microplastic contamination is a global problem which has been threatening human health and the environment. There is still a knowledge gap about the effect of persistent rain on microplastics distribution and plastisphere community in fluvial environments. In this study, the abundance and composition of microplastics in the sediment and surface water from the Pearl River was investigated. Thirty polymers (10-500 μm) were identified from thirty-eight samples collected at ten sites using the newly developed laser direct infrared (LDIR) technique. The average concentrations of microplastics in the sediment and surface water were 1974 particles kg^-1 and 290 particles L^-1, respectively. Abnormally high concentrations of polyurethanes (PU) were possibly due to particulate pollution from ship antifouling. The persistent rain increased the abundance and diversity of microplastics in the surface water, whereas an opposite trend was observed in the sediment. Sediments could temporarily switch from microplastics sinks to potential sources under the effect of violent hydrodynamic disturbances. Additionally, plastisphere communities and predicted functional profiles indicated significant differences before and after the rain. Our study highlights the important impact of persistent rain on microplastic contamination in the environment.

Environmental behaviors of emerging contaminants in freshwater ecosystem dominated by submerged plants: A review

Persistent exposure of emerging contaminants (ECs) in freshwater ecosystem has initiated intense global concerns. Freshwater ecosystem dominated by submerged plants (SP-FES) has been widely constructed to control eutrophic water. However, the environmental behaviors (e.g. migration, transformation, and degradation) of ECs in SP-FES have rarely been concerned and summarized. This review briefly introduced the sources of ECs, the pathways of ECs entering into SP-FES, and the constituent elements of SP-FES. And then the environmental behaviors of dissolved ECs and refractory solid ECs in SP-FES were comprehensively summarized, and the feasibility of removing ECs from SP-FES was critically evaluated. Finally, the challenges and perspectives on the future development for ECs removal from SP-FES were prospected, giving possible research gaps and key directions. This review will provide theoretical and technical support for the effective removal of ECs in freshwater ecosystem, especially in SP-FES.

Biomass formation and organic carbon migration potential of microplastics from a PET recycling plant: Implication of biostability

The growth of the polyethylene terephthalate (PET) mechanical recycling industry has resulted in the challenge of generating microplastics (MPs). However, little attention has been given to investigating the release of organic carbon from these MPs and their roles in promoting bacterial growth in aquatic environments. In this study, a comprehensive method is proposed to access the potential of organic carbon migration and biomass formation of MPs generated from a PET recycling plant, and to understand its impact on the biological systems of freshwater habitats. Various MPs sizes from a PET recycling plant were selected to conduct a series of tests, including the organic carbon migration test, biomass formation potential test, and microbial community analysis. The MPs smaller than 100 µm, which are difficult to remove from the wastewater, exhibited greater biomass in the observed samples (1.05 × 10¹¹ bacteria per gram MPs). Moreover, PET MPs altered the microbial diversity, with Burkholderiaceae becoming the most abundant, while Rhodobacteraceae was eliminated after being incubated with MPs. This study partly revealed that organic matter adsorbed on the surface of MPs was a significant nutrient source that increased biomass formation. PET MPs acted not only as carriers for microorganisms but also for organic matter. As a result, it is crucial to develop and refine recycling methods in order to decrease the production of PET MPs and minimize their adverse effects on the environment.

Deciphering the distinct successional patterns and potential roles of abundant and rare microbial taxa of urban riverine plastisphere

Microbial colonization on microplastics has provoked global concern; however, many studies have not considered the successional patterns and potential roles of abundant and rare taxa of the plastisphere during colonization. Hence, we investigate the taxonomic composition, assembly, interaction and function of abundant and rare taxa in the riverine plastisphere by conducting microcosm experiments. Results showed that rare taxa occupied significantly high community diversity and niche breadth than the abundant taxa, which implies that rare taxa are essential components in maintaining the community stability of the plastisphere. However, the abundant taxa played a major role in driving the succession of plastisphere communities during colonization. Both stochastic and deterministic processes signally affected the plastisphere community assemblies; while, the deterministic patterns (heterogeneous selection) were especially pronounced for rare biospheres. Plastisphere microbial networks were shaped by the enhancement of network modularity and reinforcement of positive interactions. Rare taxa played critical roles in shaping stable plastisphere by occupying the key status in microbial networks. The strong interaction of rare and non-rare taxa suggested that multi-species collaboration might be conducive to the formation and stability of the plastisphere. Both abundant and rare taxa were enriched with plentiful functional genes related to carbon, nitrogen, phosphorus and sulfur cycling; however, their potential metabolic functions were significantly discrepant, implying that the abundant and rare microbes may play different roles in ecosystems. Overall, this study strengthens our comprehending of the mechanisms regarding the formation and maintenance of the plastisphere.

Plastisphere microbiome: Methodology, diversity, and functionality

Broad topics of the plastisphere in various environments are reviewed, including its methodologies, diversity, functionality, and outlook.

Diversity, abundance and distribution characteristics of potential polyethylene and polypropylene microplastic degradation bacterial communities in the urban river

Carbon chain microplastics, polyethylene (PE), and polypropylene (PP) are the main types of refractory organics. Compared to heterochain microplastics, PE/PP degrading bacterial community and their distribution characteristics in natural rivers are unclear. In this study, the field in situ experiment and indoor enrichment experiment with PE/PP resin as only carbon sources were conducted for a total period of 1150 days. The microbial degradation of pure PE/PP resin was determined by SEM, FTIR, CLSM, GC-MS, and GPC. The Chao 1 index and Invsimpson index of the bacterial community significantly reduced after a series of incubation, demonstrating that the bacterial community was selectively enriched. Empirical core PE/PP degrading bacteria (C-bacteria) and resuscitated PE/PP degrading bacteria (R-bacteria) were screened based on the variation of the abundance of OTUs, and co-occurrence analysis displayed that C-bacteria presented higher betweenness centrality than R-bacteria. The higher abundance and diversity of R-bacteria in biofilms suggest the presence of many rare or low abundance bacteria in natural rivers that may be potential PE/PP degrading bacteria or PE/PP degrading bacteria to be activated, while the lower abundance and diversity of C-bacteria support the slow degradation rate of PE and PP in waters. Compared to the isolated and indicatory PE/PP degrading bacterial genera, the C-bacteria OTUs or genera enriched in this study displayed higher richness and abundance. Enriched PE/PP degrading bacteria occurred in all sampled sites of the Qinhuai River with higher abundance and standard betweenness centrality in sediments (averaging 0.01354 and 0.44421, respectively) than those in overlying water (averaging 0.00536 and 0.17571, respectively), while the highest abundance of degrading bacteria presented in the eutrophic sediments. Inorganic nitrogen was determined to be significantly correlated with the distribution of PE/PP degrading bacteria in sediments via redundancy analysis. This study provides a new perspective on the natural degradation potential of carbon chain microplastics by microbial communities in rivers.

Bioremediation of microplastics in freshwater environments: A systematic review of biofilm culture, degradation mechanisms, and analytical methods

Microplastics, defined as particles <5 mm in diameter, are emerging environmental pollutants that pose a threat to ecosystems and human health. Biofilm degradation of microplastics may be an ecologically friendly approach. This review systematically summarises the factors affecting biofilm degradation of microplastics and proposes feasible methods to improve the efficiency of microplastic biofilm degradation. Environmentally insensitive microorganisms were screened, optimized, and commercially cultured to facilitate the practical application of this technology. For strain screening, technology should focus on microorganisms/strains that can modify the hydrophobicity of microplastics, degrade the crystalline zone of microplastics, and metabolise additives in microplastics. The biodegradation mechanism is also described; microorganisms secreting extracellular oxidases and hydrolases are key factors for degradation. Measuring the changes in molecular weight distribution (MWD) enables better analysis of the biodegradation behaviour of microplastics. Biofilm degradation of microplastics has relatively few applications because of its low efficiency; however, enrichment of microplastics in freshwater environments and wastewater treatment plant tailwater is currently the most effective method for treating microplastics with biofilms.

Atmospheric microplastics: exposure, toxicity, and detrimental health effects

Microplastics (MPs) are micro-particulate pollutants present in all environments whose ubiquity leads humans to unavoidable exposure. Due to low density, MPs also accumulate in the atmosphere, where they are easily transported worldwide and come into direct contact with the human body by inhalation or ingestion, causing detrimental health effects. This literature review presents the sources of atmospheric MPs pollution, transport routes, physicochemical characteristics, and environmental interactions. The document also explains the implications for human health and analyzes the risk of exposure based on the potential toxicity and the concentration in the atmosphere. MPs' toxicity lies in their physical characteristics, chemical composition, environmental interactions, and degree of aging. The abundance and concentration of these microparticles are associated with nearby production sources and their displacement in the atmosphere. The above elements are presented in an integrated way to facilitate a better understanding of the associated risk. The investigation results encourage the development of future research that delves into the health implications of exposure to airborne MPs and raises awareness of the risks of current plastic pollution to promote the establishment of relevant mitigation policies and procedures.

Understanding the underestimated: Occurrence, distribution, and interactions of microplastics in the sediment and soil of China, India, and Japan

Microplastics (MPs) are non-biodegradable substances that can sustain our environment for up to a century. What is more worrying is the incapability of modern technologies to annihilate MPs from om environment. One ramification of MPs is their impact on every kind of life form on this planet, which has been discussed ahead; that is why these substances are surfacing in everyday discussions of scholars and researchers. This paper discusses the overview of the global occurrence, abundance, analysis, and remediation techniques of MPs in the environment. This paper primarily reviews the event and abundance of MPs in coastal sediments and agricultural soil of three major Asian countries, India, China, and Japan. A significant concentration of MPs has been recorded from these countries, which affirms its strong presence and subsequent environmental impacts. Concentrations such as 73,100 MPs/kg in Indian coastal sediments and 42,960 particles/kg in the agricultural soil of China is a solid testimony to prove their massive outbreak in our environment and require urgent attention towards this issue. Conclusions show that human activities, rivers, and plastic mulching on agricultural fields have majorly acted as carriers of MPs towards coastal and terrestrial soil and sediments. Later, based on recorded concentrations and gaps, future research studies are recommended in the concerned domain; a dearth of studies on MPs influencing Indian agricultural soil make a whole sector and its consumer vulnerable to the adverse effects of this emerging contaminant.

Microplastics occurrence, detection and removal with emphasis on insect larvae gut microbiota

Microplastics have been identified in all living forms including human beings, the present need is to restrain its spread and devise measures to remediate microplastics from polluted ecosystems. In this regard, the present review emphasizes on the occurrence, sources detection and toxic effects of microplastics in various ecosystems. The removal of microplastics is prevalent by various physico-chemical and biological methods, although the removal efficiency by biological methods is low. It has been noted that the degradation of plastics by insect gut larvae is a well-known aspect, however, the underlying mechanism has not been completely identified. Studies conducted have shown the magnificent contribution of gut microbiota, which have been isolated and exploited for microplastic remediation. This review also focuses on this avenue, as it highlights the contribution of insect gut microbiota in microplastic degradation along with challenges faced and future prospects in this area.

Response of sediment microbial communities to different levels of PAC contamination and exposure time

Coagulants such as polyaluminium chloride (PAC) are widely used for removing phosphorus from eutrophic water, but its application for water treatment can potentially harm the environment. In this study, a four-timepoint exposure experiment was performed at week 1, 3, 7 and 10 to investigate how microbial communities in lake sediments respond to different concentrations of PAC (RS (raw lake water with nothing added), Low, Medium and High). The results showed that, while PAC can efficiently decrease the amount of C, N and P in lake water, the presence of residual aluminum and aluminum precipitates can greatly affect the microbial communities in lake sediments. In particular, different concentrations of PAC and exposure time affected the microbial diversity and structure of lake sediments, with changes being especially obvious at high concentration of PAC after 10 weeks of exposure. Moreover, the use of PAC significantly increased the relative abundances of Gammaproteobacteria and Competibacter, while reducing those of Thermodesulfovibrionia, Vicinamibacterales, and BSV26 in time- and concentration-dependent manners. Network analysis further showed strong correlations between differential bacterial species of PAC in high concentration at 10 weeks, which further suggested that PAC treatment changed the complex structure of microbiota in lake sediment. Finally, correlation analysis indicated a close connection between water parameters and differential species induced by PAC treatment. Overall, PAC contamination changed the microbial communities at different taxonomy levels and influenced the functional pathways to potentiate the P removal, and the results offered interesting insights into the use of PAC in water treatment and its impact on biogeochemical cycling. These results indicated that more attention need to be paid to the potential impact of chemical phosphorus removing reagents on the environment, including eutrophic water.

Early stage biofilm formation on bio-based microplastics in a freshwater reservoir

Bio-based plastics (BP) produced from renewable biomass resources, such as high-density polyethylene (HDPE), polylactic acid (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), is currently increasing in terms of both products and applications. However, their biodegradability and environmental fate are not yet fully understood, especially in freshwaters. Here, we present the results of an in-situ study in a freshwater reservoir, where we submerged HDPE, PLA and PHBV microscale BP (mBP) in dialysis bags to enable exchange of small organic and inorganic molecules, including nutrients, with the surrounding water. After one and two months, the bacterial biofilm that formed on each mBP was characterised by 16S rRNA amplicon sequencing. After two-months, Oxalobacteraceae, Pedosphaeraceae, Flavobacteriaceae (Flavobacterium) and Chitinophagaceae (Ferruginibacter) had increased by up to four times. Both these and other common members (≥1 % relative total biomass) of the microbial community were similarly abundant on all mBP. Low-abundance (0.3-1 %) bacterial taxa, however, were significantly more diverse and differed on each mBP. Notably, some low-abundance families and genera increased on specific materials, e.g. Sphingomonadaceae on HDPE, Sphingobacteriaceae on PHBV, Gemmatimonas and Crenothrix on PLA. Overall, abundant bacteria were regarded as a pioneering community, while low-abundance bacteria were more diverse and preferred mBP types in the early stages of biofilm formation on mBP. It could be influenced by the environmental conditions, where nutrient levels and low temperatures might shape the low-abundance of attached bacterial communities than the plastic material itself.

Microfiber-loaded bacterial community in indoor fallout and air-conditioner filter dust

Microfibers (MFs) are widely existed in indoor air; however, characteristic of microbiota on MFs is largely unknown. In this study, air-borne MFs were collected from fallout or air-conditioner (AC) filter dust in three types of indoor space including living room, dormitory and office. Both plastic and natural MFs were identified by Fourier transform infrared spectroscopy. Ultramicroscopic observation showed dense biofilms adhering on surfaces of MFs. Fallout MFs contained more bacteria but fewer fungi than MFs from AC filter dust. MFs-loaded bacteria were of highest abundance in living rooms, following dormitories and offices. Bacterial community and its diversity were further analyzed by 16S rRNA High-throughput sequencing. Up to 4540 of bacterium OTUs were shared in these MFs samples, unique OTUs in fallout and AC filter samples accounting for 26.3 % and 25.7 % of the total. Compared to MFs fallout, AC filter MFs contained more species of pathogenic bacteria, such as Betaproteobacteriales and Ralstonia, with obviously different β-diversity between two groups. Phenotypic analysis showed that fallout and AC filter MFs bacteria presented high index values of film formation, oxidative stress tolerance and potential pathogenicity. Overall, these results suggest that abundant bacteria including pathogen can be loaded on MFs, and would pose health risks through delivery of indoor MFs.

Dual regulatory effects of microplastics and heat waves on river microbial carbon metabolism

Rivers play a critical role in the global carbon cycle, but the processes can be affected by widespread microplastic (MP) pollution and the increasing frequency of heat waves (HWs) in a warming climate. However, little is known about the role of river microbes in regulating the carbon cycle under the combined action of MP pollution and HWs. Here, through seven-day MP exposure and three cycles of HW simulation experiments, we found that MPs inhibited the thermal adaptation of the microbial community, thus regulating carbon metabolism. The CO₂ release level increased, while the carbon degradation ability and the preference for stable carbon were inhibited. Metabonomic, 16 S rRNA and ITS gene analyses further revealed that the regulation of carbon metabolism was closely related to the microbial r-/K- strategy, community assembly and transformation of keystone taxa. The random forest model revealed that dissolved oxygen and ammonia-nitrogen were important variables influencing microbial carbon metabolism. The above findings regarding microbe-mediated carbon metabolism provide insights into the effect of climate-related HWs on the ecological risks of MPs.

Microplastic discharge from a wastewater treatment plant: long term monitoring to compare two analytical techniques, LDIR and optical microscopy while also assessing the removal efficiency of a bubble curtain

In this study we compare two parallel analytical methods while also testing a microplastics mitigation method. We assess the effectiveness of a bubble curtain to reduce microplastics in a wastewater treatment plant (WWTP)-effluent canal during the course of six months (>70 samples) using two analytical techniques: laser direct infrared (LDIR) and optical microscopy (OM) covering a size range of 0.02 to 5 mm. Comparison of the two analytical strategies shows similar trends, fluctuations, and correlating particle and fibre numbers. However, absolute values of particles differ, and the strategies provide different levels of information: LDIR is capable of identifying the plastic type as well as shape, while OM cannot determine the plastic type. Furthermore LIDR has a lower size limit (10-20 μm) than OM (50 μm). While information obtained by OM in general is far less detailed it is more affordable. This research also shows that the bubble curtain pilot does not have a measurable effect on the particle concentration. Possible effects of the curtain are hidden in the temporal variations. This research also reveals that individual samples show a large variation in particle numbers, illustrating that single measurements might give a poor representation of environmental particle number.

Prevalence and risk assessment of microplastics in the Nile Delta estuaries: "The Plastic Nile" revisited

Recent research is directed toward studying plastic pollution in rivers, and estuaries due to the importance of freshwater bodies in all aspects of life. The river deltas and estuaries are interesting for studying the flux of plastics into the oceans. The Nile River has been identified as a hot spot of plastic litter flux in the eastern Mediterranean basin. In addition, it was nicknamed "Plastic Nile", yet this major river is largely unexplored with a lack of field measurements and adequate surveys. The current study was based on bridging this scientific gap. Three trips were conducted, covering 30 km in the Rosetta branch and 23 km in the Damietta branch, during the high water level in summer 2021, and 10 km off the inlet of Lake Burullus, in spring 2021. Microplastics in surface water ranged from 761 ± 319 to 1718 ± 1008 MPs/m³, and from 167 ± 137 to 1630 ± 1303 MPs/kg of dry sediments. Land use/ land cover mapping using Sentinel-2 images showed several sources of pollution that contribute to plastic contamination in the study area. Thermal analysis indicated seven plastic polymers; including, PE, PP, PET, PEVA, and PTFE, using discarded plastic products as reference materials. Microplastics were composed of colored and glossy fragments of sizes <500 μm, originating from land-based sources. Pollution load, polymer risk assessment, and ecological risk indices were calculated. Based on field observations macro-plastics were retained within the extensive network of infrastructure and dam systems. 80-106 billion MPs/year were estimated to flux from the Nile estuaries into the Mediterranean Sea. The current situation urges the development of binding plans to reduce plastic waste in the Nile Delta, as well as setting environmental monitoring points along the Deltaic coast.

UV stabilizers can foster early development of biofilms on freshwater microplastics

Interactions between microbes and microplastics are important as of emerging plastic loads in the global environment. Although diverse plastic additives are used in large amounts, there are very few studies on a quantitative comparison of plastisphere on plastics with different plastic additives. We studied the effects of two widely used UV stabilizers (benzotriazole-type UV-327 and benzophenone-type UV-531 were selected based on their persistence and toxicity) in low-density polyethylene (LDPE) on freshwater microbes. This is the first study on the sole effects of UV stabilizers used as plastic additives on freshwater in situ plastisphere biofilm development. Confocal laser scanning microscopy, assisted with proper differentiating fluorochromes and threshold-based 3D segmentation of data, was used to visualize and quantify biofilm. On the first week of biofilm growth, there was very little biovolume and a negligible amount of phototrophs on pristine LDPE contrasting other substrates. Biovolumes were significantly higher on LDPE with UV stabilizers (up to 159% higher than pristine LDPE), although the biomass was mostly dead due to toxicity (>100% higher dead biovolume than live biovolume in LDPE with UV stabilizers). After the fourth week, marginally higher biovolumes along with a revival of the biomass on LDPE with UV stabilizers were observed. The ability to induce microorganismic intracellular reactive oxygen species by UV stabilizers was detected, which may stimulate biofilm growth during the primary phase of biofilm development. Atomic force microscopy analysis denoted that LDPE with UV stabilizers exhibit considerably stronger adhesion force than pristine LDPE. These observations suggest that UV stabilizers can foster the early attachment of microbes to microplastics while killing the surface contacting layer. An alive upper layer of microbes can get developed on the dead biofilm without much disruption due to the toxicity of UV stabilizers. This occurrence can eventually boost the early development of biofilms on plastics.

Microplastics in urban waters and its effects on microbial communities: a critical review

Microplastic (MP) pollution is one of the emerging threats to the water and terrestrial environment, forcing a new environmental challenge due to the growing trend of plastic released into the environment. Synthetic and non-synthetic plastic components can be found in rivers, lakes/reservoirs, oceans, mountains, and even remote areas, such as the Arctic and Antarctic ice sheets. MPs' main challenge is identifying, measuring, and evaluating their impacts on environmental behaviors, such as carbon and nutrient cycles, water and wastewater microbiome, and the associated side effects. However, until now, no standardized methodical protocols have been proposed for comparing the results of studies in different environments, especially in urban water and wastewater. This review briefly discusses MPs' sources, fate, and transport in urban waters and explains methodological uncertainty. The effects of MPs on urban water microbiomes, including urban runoff, sewage wastewater, stagnant water in plumbing networks, etc., are also examined in depth. Furthermore, this study highlights the pathway of MPs and their transport vectors to different parts of ecosystems and human life, particularly through mediating microbial communities, antibiotic-resistant genes, and biogeochemical cycles. Overall, we have briefly highlighted the present research gaps, the lack of appropriate policy for evaluating microplastics and their interactions with urban water microbiomes, and possible future initiatives.

Microbial community niches on microplastics and prioritized environmental factors under various urban riverine conditions

Microplastics (MPs) provide habitats to microorganisms in aquatic environments; distinct microbial niches have recently been elucidated. However, there is little known about the microbial communities on MPs under urban riverine conditions, in which environmental factors fluctuate. Therefore, this study investigated MP biofilm communities under various urban riverine conditions (i.e., organic content, salinity, and dissolved oxygen (DO) concentration) and evaluated the prioritized factors affecting plastisphere communities. Nine biofilm-forming reactors were operated under various environmental conditions. Under all testing conditions, biofilms grew on MPs with decreasing bacterial diversity. Interestingly, biofilm morphology and bacterial populations were driven by the environmental parameters. We found that plastisphere community structures were grouped according to the environmental conditions; organic content in the water was the most significant factor determining MP biofilm communities, followed by salinity and DO concentration. The principal plastisphere communities were Proteobacteria, Bacteroidetes, Cyanobacteria, and Firmicutes phyla. In-depth analyses of plastisphere communities revealed that biofilm-forming and plastic-degrading bacteria were the predominant microbes. In addition, potential pathogens were majorly discovered in the riverine waters with high organic content. Our results suggest that distinct plastisphere communities coexist with MP particles under certain riverine water conditions, implying that the varied MP biofilm communities may affect urban riverine ecology in a variety of ways.

Archaeal contribution to carbon-functional composition and abundance in China's coastal wetlands: Not to be underestimated

Microbial diversity, together with carbon function, plays a key role in driving the wetland carbon cycle; however, the composition, driving factors of carbon-functional genes and the relationship with microbial community have not been well characterized in coastal wetlands. To understand these concerns, microbes, carbon-functional genes, and related environmental factors were investigated in twenty wetlands along China's coast. The results indicate that carbon-functional gene composition is dominated by archaeal rather than bacterial community and that Nanoarchaeaeota is the dominant archaeal phylum associated with carbon cycling in anoxic sediments. Compared with microbes, carbon-functional composition was more stable because they showed the highest Shannon diversity and archaeal functional redundancy. Deterministic processes dominated microbial community, and stochastic processes were more important for carbon-functional genes. Labile Fe governed archaeal and carbon-functional composition by coupling with nitrogen and carbon biogeochemical cycles, while bacterial community was affected by NH4-N and SOC/SON. This study highlights the predominant contributions of archaea to carbon-functional genes and to the stability of carbon-functional composition, thus providing new insights into the microbial dominance of the carbon cycle and the evaluation of carbon function in coastal wetlands.

Toxic effects of polyethylene microplastics on transcriptional changes, biochemical response, and oxidative stress in common carp (Cyprinus carpio)

Aquatic ecosystems have become a place for accumulating microplastics (MPs). MPs can directly or indirectly damage organisms. Although studies of the toxicity of MPs, there are insufficient literature reports on the effects of MPs on freshwater aquatic life. Therefore, this study aimed to evaluate the effect of MPs toxicity on Cyprinus carpio. In this study, biochemical parameters, oxidative biomarkers, and gene expression were assayed in fish exposed to 0, 175, 350, 700, and 1400 μg L^-1 of MPs for 30 days. MPs were detected in the liver and intestine of fish using FTIR-analysis. Mt1, Ces2, and P450 mRNA expression were enhanced in the hepatocytes of fish exposed to MPs, while Mt2 gene expression was significantly decreased. After exposure to MPs, MDA and carbonyl protein levels were higher than those of the reference group. The antioxidant capacity and glycogen contents in the hepatocytes significantly declined. MPs significantly inhibited glutathione reductase (GR), glucose 6-phosphate dehydrogenase (G6PDH), and catalase (CAT) activities. However, superoxide dismutase (SOD) and glutathione peroxidase (GPx) activities increased. MPs decreased the total protein, globulin levels, and butyrylcholinesterase (BChE) activity in blood. In contrast, aspartate aminotransferase (AST), alanine aminotransferase (ALT), gamma-glutamyl transferase (GGT), lactate dehydrogenase (LDH), alkaline phosphatase (ALP), and creatine phosphokinase (CPK) activities increased in treated-fish with MPs. Glucose, creatinine, cholesterol and triglyceride concentrations in fish exposed to MPs were significantly higher than that of the reference group. Consequently, MPs exposure could disrupt biochemical homeostasis, oxidative stress and alter the expression of genes involved in detoxification.

Microplastics in Sediments of East Surabaya, Indonesia: Regional Characteristics and Potential Risks

The presence of microplastics (MPs) in marine environments has become increasingly apparent. Owing to the lack of effective solid waste management, Indonesia is the second largest producer of ocean plastic waste after China. Currently, information about pollution of MPs in the sediments of East Surabaya, Indonesia, is not available, and this issue is addressed in this study for the first time. Sediment samples were collected from 16 sampling sites along urban and mangrove coastal areas. MPs were observed in most of the sampling sites, with abundances ranging from ND (not detected) to 598 items/kg. MP shapes constituted fragments (30%), foam (28%), granules (22%), and fibers (20%). The 500-1000 µm fraction was the dominant size of MPs. Polypropylene was the major polymer constituent, followed by high-density polyethylene and polyethylene. Findings from Spearman's correlation coefficients, principal component analysis, and hierarchical cluster analysis reveal that the spatial pattern of MPs is closely related to coastal characteristics and population density. MPs in different coastal regions were assessed by the polymer risk index. Results reveal that coastal areas in the Bulak district exhibit the highest risk. Our results confirm the prevalence of MPs as anthropogenic pollutants in East Surabaya and highlight the importance of management action and education on environmental protection for the mitigation of MP pollution.

Characterization of biofilms formed on polystyrene microplastics (PS-MPs) on the shore of the Tuul River, Mongolia

Microplastic (MP) surfaces are common sites for microbial colonization and promote biofilm formation in aquatic environments, resulting in changes to the surface properties of MPs and their interaction with pollutants. Although the diversity of microbial communities adhering to MPs has been well documented in aquatic environments, surface changes in MPs due to microbial colonization are still poorly understood. In this study, we aimed to evaluate the variations in the chemical structure and components of biofilms on the surface of polystyrene microplastics (PS-MPs) collected from the shore of the Tuul River in Mongolia, using micro-Fourier transform infrared (micro-FTIR) spectroscopy. We applied a spectral subtraction approach, and the differences in spectra between peroxide-treated and untreated PS-MP particles enabled us to obtain the structural features of biofilms that developed on the plastic surface. In addition, the surface photooxidation status of the sampled PS-MPs was calculated from the subtracted spectra of peroxide-treated and pristine PS-MPs. Various functional groups of N-containing organic substances from bacterial and fungal communities were detected in the obtained biofilm spectra. Based on the spectral characteristics, biofilm spectra were classified into four groups by applying principal component analysis (PCA). A wide range of carbonyl indices (CIs: 0.00-1.40) was found in the subtracted spectra between peroxide-treated and pristine PS-MPs, revealing that different levels of surface oxidation progressed by physical influences such as solar radiation and freeze-thaw cycles. Furthermore, lignocellulose and silicate were found on the PS-MP surface as allochthonous attachments. Considering the variation in residence time of PS-MPs, they attract plant residues and mineral particles through the development of biofilms and travel together in the river environment. Given that the dynamic behavior of MPs can be greatly affected by changes in their surfaces, further studies are needed to emphasize their link to organic matter dynamics.