Highly enhanced biodegradation of pharmaceutical and personal care products in a novel tidal flow constructed wetland with baffle and plants

Ciprofloxacin affects nutrient removal in manganese ore-based constructed wetlands: Adaptive responses of macrophytes and microbes

Ciprofloxacin (CIP) has received considerable attention in recent decades due to its high ecological risk. However, little is known about the potential response of macrophytes and microbes to varying levels of CIP exposure in constructed wetlands. Therefore, lab-scale manganese ore-based tidal flow constructed wetlands (MO-TFCWs) were operated to evaluate the responses of macrophytes and microbes to CIP over the long term. The results indicated that total nitrogen removal improved from 79.93% to 87.06% as CIP rose from 0 to 4 mg L-1. The chlorophyll content and antioxidant enzyme activities in macrophytes were enhanced under CIP exposure, but plant growth was not inhibited. Importantly, CIP exposure caused a marked evolution of the substrate microbial community, with increased microbial diversity, expanded niche breadth and enhanced cooperation among the top 50 genera, compared to the control (no CIP). Co-occurrence network also indicated that microorganisms may be more inclined to co-operate than compete. The abundance of the keystone bacterium (involved in nitrogen transformation) norank_f__A0839 increased from 0.746% to 3.405%. The null model revealed drift processes (83.33%) dominated the community assembly with no CIP and 4 mg L-1 CIP. Functional predictions indicated that microbial carbon metabolism, electron transfer and ATP metabolism activities were enhanced under prolonged CIP exposure, which may contribute to nitrogen removal. This study provides valuable insights that will help achieve stable nitrogen removal from wastewater containing antibiotic in MO-TFCWs.

Biotic/abiotic transformation mechanisms of phenanthrene in iron-rich constructed wetland under redox fluctuation

Iron-rich constructed wetlands (CWs) could promote phenanthrene bioremediation efficiently through biotic and abiotic pathways, which have gained increasing attention. However, the biotic/abiotic transformation mechanisms of trace organic contaminants in iron-rich CW are still ambiguous. Herein, three CWs (i.e., CW-A: Control; CW-B: Iron-rich CW, CW-C: Iron-rich CW + tidal flow) were constructed to investigate the transformation mechanisms of phenanthrene through Mössbauer spectroscopy and metagenomics. Results demonstrated CW-C achieved the highest phenanthrene removal (94.0 %) and bacterial toxicity reduction (92.1 %) due to the optimized degradation pathway, and subsequently achieved the safe transformation of phenanthrene. Surface-bound/low-crystalline iron regulated hydroxyl radical (·OH) production predominantly, and its utilization was promoted in CW-C, which also improved electron transfer capacity. The enhanced electron transfer capacity led to the enrichment of PAH-degrading microorganisms (e.g., Thauera) and keystone species (Sphingobacteriales bacterium 46-32) in CW-C. Additionally, the abundances of phenanthrene transformation (e.g., EC:1.14.12.-) and tricarboxylic-acid-cycle (e.g., EC:2.3.3.1) enzyme were up-regulated in CW-C. Further analysis indicated that the safe transformation of phenanthrene was mainly attributed to the combined effect of abiotic (·OH and surface-bound/low-crystalline iron) and biotic (microbial community and diversity) mechanisms in CW-C, which contributed similarly. Our study revealed the essential role of active iron in the safe transformation of phenanthrene, and was beneficial for enhanced performance of iron-rich CW.

Constructed wetlands for the removal of organic micropollutants from wastewater: Current status, progress, and challenges

In this work, the practical utility of constructed wetlands (CWs) is described as a promising treatment option for micropollutants (MPs) in wastewater with the aid of their eco-friendly, low-energy, economically feasible, and ecologically sustainable nature. This paper offers a comprehensive review on CW technology with respect to the key strategies for MP removal such as phytoremediation, substrate adsorption, and microbial degradation. It explores the important factors controlling the performance of CWs (e.g., in terms of configurations, substrates, plant-microbe interactions, temperature, pH, oxygen levels, hydraulic loading rate, and retention time) along with the discussions on the pivotal role of microbial populations in CWs and plant-microbe cooperative remediation dynamics, particularly in relation to diverse organic MP patterns in CWs. As such, this review aims to provide valuable insights into the key strategies for optimizing MP treatment and for enhancing the efficacy of CW systems. In addition, the process-based models of constructed wetlands along with the numerical simulations based on the artificial neural network (ANN) method are also described in association with the data exploratory techniques. This work is thus expected to help open up new possibilities for the application of plant-microbe cooperative remediation approaches against diverse patterns of organic MPs present in CWs.

Exploring the efficiency of tide flow constructed wetlands for treating mariculture wastewater: A comprehensive study on antibiotic removal mechanism under salinity stress

Antibiotic residues in aquaculture environment pose persistent threats to ecology and human health, exacerbated by salt-alkali mariculture wastewater. Yet, little is known about antibiotic removal in tidal flow constructed wetlands (TFCWs) under salinity stress, especially considering TFCW constitution, configuration, and influent water characteristics. Here, the removal performance and mechanism of different TFCWs for sulfonamide antibiotics (SAs: sulfadiazine, sulfamethazine, sulfamonomethoxine, and sulfamethoxazole) and trimethoprim (TMP) from mariculture wastewater (with low, medium, and high salinity) were evaluated alongside comparisons of environmental factors and microbial responses. Results showed substantial reduction in alkalinity (from 8.25-8.26 to 7.65-8.18), salinity (from 3.67-11.30 ppt to 3.20-10.79 ppt), and SAs concentrations (from 7.79-15.46 mg/L to 0.25-10.00 mg/L) for mariculture wastewater using TFCWs. Zeolite and yellow flag configurations exhibited superior performance in SAs removal from mariculture wastewater. Furthermore, the salt-alkali neutralization and oxygen transport capabilities of zeolite, along with the salt-alkali tolerance and biofilm formation characteristics of yellow flag, promoted the development of a biofilm in the rhizosphere dominated by oxidative stress tolerance and facultative anaerobic traits, thereby improving the TFCW microenvironment. Consequently, aerobic (Sulfuritalea and Enterobacter) and salt-tolerant (Pseudomonas) functional bacteria involved in antibiotic degradation were selectively enriched in the zeolite- and yellow flag-TFCWs, contributing to the effective biodegradation of SAs (achieving removal efficiency of 92-97 %). Besides, the high salt-alkali levels of mariculture wastewater and the strong oxygen-enriched capacity of the TFCWs not only enhanced the aerobic oxidation reaction of SAs, but also bidirectionally inhibited the substrate adsorption and anaerobic reduction process of TMP. These findings address a critical gap by investigating the efficacy of TFCWs in removing antibiotics from mariculture wastewater under various salinity conditions, providing essential insights for optimizing wetland design and improving wastewater management in mariculture environments.

Asymmetries among soil fungicide residues, nitrous oxide emissions and microbiomes regulated by nitrification inhibitor at different moistures

Carbendazim residue has been widely concerned, and nitrous oxide (N2O) is one of the dominant greenhouse gases. Microbial metabolisms are fundamental processes of removing organic pollutant and producing N2O. Nitrification inhibitor 3,4-dimethylpyrazole phosphate (DMPP) can change soil abiotic properties and microbial communities and simultaneously affect carbendazim degradation and N2O emission. In this study, the comprehensive linkages among carbendazim residue, N2O emission and microbial community after the DMPP application were quantified under different soil moistures. Under 90% WHC, the DMPP application significantly reduced carbendazim residue by 54.82% and reduced soil N2O emission by 98.68%. The carbendazim residue was negatively related to soil ammonium nitrogen (NH4+-N), urease activity, and ratios of Bacteroidetes, Thaumarchaeota and Nitrospirae under 90% WHC, and the N2O emission was negatively related to NH4+-N content and relative abundance of Acidobacteria under the 60% WHC condition. In the whole (60% and 90% WHC together), the carbendazim residue was negatively related to the abundances of nrfA (correlation coefficient = -0.623) and nrfH (correlation coefficient = -0.468) genes. The hao gene was negatively related to the carbendazim residue but was positively related to the N2O emission rate. The DMPP application had the promising potential to simultaneously reduce ecological risks of fungicide residue and N2O emission via altering soil abiotic properties, microbial activities and communities and functional genes. ENVIRONMENTAL IMPLICATION: Carbendazim was a high-efficiency fungicide that was widely used in agricultural production. Nitrous oxide (N2O) is the third most important greenhouse gas responsible for global warming. The 3, 4-dimethylpyrazole phosphate (DMPP) is an effective nitrification inhibitor widely used in agricultural production. This study indicated that the DMPP application reduced soil carbendazim residues and N2O emission. The asymmetric linkages among the carbendazim residue, N2O emission, microbial community and functional gene abundance were regulated by the DMPP application and soil moisture. The results could broaden our horizons on the utilizations DMPP in decreasing fungicide risks and N2O emission.

Effects of garlic-derived fructan and oligofructose mixtures on intestinal health and constipation relief in mice

BACKGROUND

Garlic polysaccharides (GPs) constitute over 75% of the dry weight of garlic. They are characterized by fructan with a 2,1-β-d-Fruf backbone and 2,6-β-d-Fruf branches. Studies have suggested a role for GPs in regulating gut microbiota but whether they possess a comprehensive function in maintaining intestinal well-being and can serve as effective prebiotics remains unknown. To explore this, varied doses of GPs (1.25-5.0 g kg-1 body weight) and inulin (as a positive control) were administered to Kunming mice via gavage, and their effects on the intestinal epithelial, chemical, and biological barriers were assessed. A constipation model was also established using loperamide to investigate the potential effects of GPs on the relief of constipation.

RESULTS

Administration of GPs significantly upregulated expression of tight-junction proteins and mucins in Kunming mouse small-intestine tissue. Garlic polysaccharides elevated cecal butyric acid content, reduced the abundance of Desulfobacterota, and decreased the ratio of Firmicutes to Bacteroidetes (the F/B ratio). Garlic polysaccharides also promoted the growth of Bacteroides acidifaciens and Clostridium saccharogumia. Tax4Fun functional predictions suggested the potential of GPs to prevent human diseases, reducing the risk of insulin resistance, infectious diseases, and drug resistance. Garlic polysaccharides also exhibited a beneficial effect in alleviating loperamide-induced constipation symptoms by enhancing small intestinal transit, softening stool consistency, accelerating bowel movements, and promoting the release of excitatory neurotransmitters.

CONCLUSIONS

These findings highlight the important role of GPs in maintaining gut fitness by enhancing intestinal barrier function and peristalsis. Garlic polysaccharides are promising prebiotics, potentially contributing to overall intestinal well-being and health. © 2024 Society of Chemical Industry.

Removal of pharmaceutical contaminants from hospital wastewater using constructed wetlands: a review

AbstractPharmaceutical compounds are a significant source of environmental pollution, particularly in hospital wastewater, which contains high concentrations of such compounds. Constructed wetlands have emerged as a promising approach to removing pharmaceutical compounds from wastewater. This paper aims to review the current state of knowledge on the removal of pharmaceutical compounds from hospital wastewater using constructed wetlands, including the mechanism of removal, removal efficiency, and future prospects. Pharmaceutical contaminants have been considered to be one of the most emerging pollutants in recent years. In this review article, various studies on constructed wetlands are incorporated in order to remove the pharmaceutical contaminants. The nature of constructed wetland can be explained by understanding the types of constructed wetland, characteristics of hospital wastewater, removal mechanism, and removal efficiency. The results of the review indicate that constructed wetlands are effective in removing pharmaceutical compounds from hospital wastewater. The removal mechanism of these compounds involves a combination of physical, chemical, and biological processes, including adsorption, degradation, and uptake by wetland plants. The removal efficiency of constructed wetlands varies depending on several factors, including the type and concentration of pharmaceutical compounds, the design of the wetland system, and the environmental conditions. Further research is necessary to optimize the performance of these systems, particularly in the removal of emerging contaminants, to ensure their effectiveness and long-term sustainability.

Biodegradation and sorption of nutrients and endocrine disruptors in a novel concrete-based substrate in vertical-flow constructed wetlands

Removing phosphorus and endocrine-disruptors (EDC) is still challenging for low-cost sewage treatment systems. This study investigated the efficiency of three vertical-flow constructed wetlands (VFCW) vegetated with Eichhornia crassipes onto red clay (CW-RC), autoclaved aerated concrete (CW-AC), and composite from the chemical activation of autoclaved aerated concrete with white cement (CW-AAC) in the removal of organic matter, nutrients, and estrone, 17β-estradiol, and 17α-ethinylestradiol. The novelty aspect of this study is related to selecting these clay and cementitious-based materials in removing endocrine disruptors and nutrients in VFCW. The subsurface VFCW were operated in sequencing-batch mode (cycles of 48-48-72 h), treating synthetic wastewater for 308 days. The operation consisted of Stages I and II, different by adding EDC in Stage II. The presence of EDC increased the competition for dissolved oxygen (DO) and reduced the active sites available for adsorption, diminishing the removal efficiencies of TKN and TAN and total phosphorus in the systems. CW-RC showed a significant increase in COD removal from 65% to 91%, while CW-AC and CW-AAC maintained stable COD removal (84%-82% and 78%-81%, respectively). Overall, the substrates proved effective in removing EDC, with CW-AC and CW-AAC achieving >60% of removal. Bacteria Candidatus Brocadia and Candidatus Jettenia, responsible for carrying out the Anammox process, were identified in assessing the microbial community structure. According to the mass balance analysis, adsorption is the main mechanism for removing TP in CW-AC and CW-AAC, while other losses were predominant in CW-RC. Conversely, for TN removal, the adsorption is more representative in CW-RC, and the different metabolic routes of microorganisms, biofilm assimilation, and partial ammonia volatilization in CW-AC and CW-AAC. The results suggest that the composite AAC is the most suitable material for enhancing the simultaneous removal of organic matter, nutrients, and EDC in VFCW under the evaluated operational conditions.

Occurrence of antibiotics in reclaimed water, and their uptake dynamics, phytotoxicity, and metabolic fate in Lolium perenne L

Reclaimed water (RW) has been extensively used for irrigation in agriculture, yet the occurrence of antibiotics in real RW, and their toxicity, uptake dynamics and metabolic fate still needs comprehensive exploration. In this study, we investigated the residual concentrations of nineteen antibiotics in the RW from four wastewater treatment plants, and determined their toxicity on plant at environment-relevant concentration. Total found concentrations of these antibiotics ranged from 623.66 ng L-1 to 1536.96 ng L-1, which decreased 10.3 and 19.4 % of roots' length and weight. Uptake dynamics analysis of the most hazardous antibiotic, norfloxacin (NFX) showed increasing amounts in the roots and leaves up to 3087.71 μg g-1. Ryegrass also can remove >80 % of 100 μg L-1 NFX being achieved by biodegradation through ring cleavage, decarboxylation, defluorination, hydrogenation, methylation and oxidation. Toxicity assessment of the identified byproducts showed their more toxic effect on fish, daphnia and algae. This study extended our understanding of the fate of antibiotics in plants during irrigation with reclaimed water, and emphasized its safety and pollutants' biomagnification concerns.

Photocatalytic Degradation of Acetaminophen in Aqueous Environments: A Mini Review

Over the past few decades, acetaminophen (ACT), a typical nonsteroidal anti-inflammatory drug (NSAID), has gained global usage, positioning itself as one of the most extensively consumed medications. However, the incomplete metabolism of ACT leads to a substantial discharge into the environment, classifying it as an environmental contaminant with detrimental effects on non-target organisms. Various wastewater treatment technologies have been developed for ACT removal to mitigate its potential environmental risk. Particularly, photocatalytic technology has garnered significant attention as it exhibits high efficiency in oxidizing and degrading a wide range of organic pollutants. This comprehensive review aims to systematically examine and discuss the application of photocatalytic technology for the removal of ACT from aqueous environments. Additionally, the study provides a detailed overview of the limitations associated with the photocatalytic degradation of ACT in practical applications, along with effective strategies to address these challenges.

The efficiency of full-scale subsurface constructed wetlands with high hydraulic loading rates in removing pharmaceutical and personal care products from secondary effluent

Constructed wetlands (CWs) are usually operated at low hydraulic load rates (HLRs) of < 0.5 m³/m²/d, and can efficiently remove pharmaceuticals and personal care products (PPCPs) from wastewaters. They however often occupy a large area of land, especially when treating the secondary effluent from wastewater treatment plants (WWTPs) in megacities. High-load CWs (HCWs) with an HLR ≥ 1 m³/m²/d, requiring smaller land areas, are a good option for urban areas. However, their performance for PPCP removal is not clear. In this study, we evaluated the performance of three full-scale HCWs (HLR: 1.0-1.3 m³/m²/d) to remove 60 PPCPs, and found they had a stable removal performance and a higher areal removal capacity than the previously reported CWs operated at low HLRs. We verified the advantages of HCWs by testing the efficiency of two identical CWs at a low HLR (0.15 m³/m²/d) and a high HLR (1.3 m³/m²/d) fed with the same secondary effluent. The areal removal capacity during the high-HLR operation was 6-9 times higher than that during the low-HLR operation. A high dissolved oxygen content, and low COD and NH₄-N concentrations in the secondary effluent were critical for the robust PPCP removal by tertiary treatment HCWs.

Screening of pharmaceutical and personal care products (PPCPs) along wastewater treatment system equipped with root zone treatment: A potential model for domestic waste leachate management

We present the use of root zone treatment (RZT) based system for the removal of pharmaceutical and personal care products (PPCPs) from domestic wastewater. The occurrence of more than a dozen PPCPs were detected in an academic institution wastewater treatment plant (WWTP) at three specific locations, i.e., influent, root treatment zone, and effluents. The comparisons of observed compounds detected at various stages of WWTP suggest that the presence of PPCPs, like homatropine, cytisine, carbenoxolone, 4,2',4',6'-tetrahydroxychalcone, norpromazine, norethynodrel, fexofenadine, indinavir, dextroamphetamine, 3-hydroxymorphinan, phytosphingosine, octadecanedioic acid, meradimate, 1-hexadecanoyl-sn-glycerol, and 1-hexadecylamine, are unusual than the usual reported PPCPs in the WWTPs. In general, carbamazepine, ibuprofen, acetaminophen, trimethoprim, sulfamethoxazole, caffeine, triclocarban, and triclosan are often reported in wastewater systems. The normalized abundances of PPCPs range between 0.037-0.012, 0.108-0.009, and 0.208-0.005 in main influent, root zone effluent, and main effluents, respectively, of the WWTP. In addition, the removal rates of PPCPs were observed from -200.75% to ∼100% at RZT phase in the plant. Interestingly, we observed several PPCPs at later stages of treatment which were not detected in the influent of the WWTP. This is probably owing to the presence of conjugated metabolites of various PPCPs present in the influent, which subsequently got deconjugated to reform the parent compounds during the biological wastewater treatment. In addition, we suspect the potential release of earlier absorbed PPCPs in the system, which were absent on that particular day of sampling but have been part of earlier influents. In essence, RZT-based WWTP was found to be effective in removing the PPCPs and other organic contaminants in the study but results in stress the need for further comprehensive research on RZT system to conclude the exact removal efficacy and fate of PPCPs during treatment in the system. As a current research gap, the study also recommended RZT to be appraised for PPCPs in-situ remediation from landfill leachates, an underestimated source of PPCPs intrusion in the environment.

Insight into pharmaceutical and personal care products removal using constructed wetlands: A comprehensive review

Pharmaceutical and personal care products (PPCPs) were regarded as emerging environmental pollutants due to their ubiquitous appearance and high environmental risks. The wastewater treatment plants (WWTPs) became the hub of PPCPs receiving major sources of PPCPs used by humans. Increasing concern has been focused on promoting cost-effective ways to eliminate PPCPs within WWTPs for blocking their route into the environment through effluent discharging. Among all advanced technologies, constructed wetlands (CWs) with a combination of plants, substrates, and microbes attracted attention due to their cost-effectiveness and easier maintenance during long-term operation. This study offers baseline data for risk control and future treatment by discussing the extent and dispersion of PPCPs in surface waters over the past ten years and identifying the mechanisms of PPCPs removal in CWs based on the up-to-present research, with a special focus on the contribution of sediments, vegetation, and the interactions of microorganisms. The significant role of wetland plants in the removal of PPCPs was detailed discussed in identifying the contribution of direct uptake, adsorption, phytovolatilization, and biodegradation. Meanwhile, the correlation between the physical-chemical characteristics of PPCPs, the configuration operation of wetlands, as well as the environmental conditions with PPCP removal were also further estimated. Finally, the critical issues and knowledge gaps before the real application were addressed followed by promoted future works, which are expected to provide a comprehensive foundation for study on PPCPs elimination utilizing CWs and drive to achieve large-scale applications to treat PPCPs-contaminated surface waters.

Hydraulic characteristics of small-scale constructed wetland based on residence time distribution

This paper designs and builds a small constructed wetland test site to study the internal hydraulic characteristics of different types of constructed wetlands, conducts NaCl pulse tracing experiments, and fits the residence time distribution (RTD) with the CSTRs+PFD model (Continuous Stirred-Tank Reactor model in parallel with Plug Flow with Dispersion model). The results showed that, among the six types of constructed wetlands, hydraulic parameters of horizontal subsurface flow constructed wetlands with baffles had the best performance, with a tracer recovery rate (F(t)) reaching 43.67% and hydraulic efficiency (λ) reaching 0.81. The addition of baffles slowed flow velocity, increased mean hydraulic retention time (T_m) and peak residence time (T_p), and reduced the short circuits phenomenon. The velocity of internal water flow increased during the horizontal and vertical deflections, which could well avoid the stagnation phenomenon caused by complicated flow state, thereby improving the hydraulic efficiency (λ). The CSTRs+PFD model can better fit the RTD of 6 different types of constructed wetlands. The peak value of the fitted curve, the time to reach the peak and the slope of the curve are all very similar to the measured RTD.

Fate and toxicity of triclosan in tidal flow constructed wetlands amended with cow dung biochar

Triclosan (TC) is one of the threats to the environment due to its bioaccumulative nature, persistency, combined toxicity in aquatic biota, and endocrine-disrupting nature. This study revealed the removal of TC via three distinct setups of vertical flow constructed wetlands (VFCW: B-VFCW (with biochar); PB-VFCW (with plant Colocasia and biochar); C-VFCW (without biochar but with plant)) operated with normal flow and tidal-flow (flooding/drying cycles of 72 h/24 h: B-TFCW; PB-TFCW; C-TFCW) mode for 216 h of the operation cycle. The effluent was analyzed for changes in TC load and wastewater parameters (COD, NO₃-N, NH₄⁺-N, and DO). TC reduction efficiency (%) was found to be higher in PB-TFCW (98.41) followed by, C-TFCW (82.41), B-TFCW (77.51), PB-VFCW (71.83), C-VFCW (64.25), and B-VFCW (52.19) (p < 0.001). Reduction efficiency for COD (29-75 - 53.10%), and NH₄⁺-N (86.5-97.9%) was better in TFCWs than that of setups with a normal mode of operation. TFCWs showed higher DO (3.87-4.89 mg L^-1) during the operation period than that of VFCWs. The toxic impact of TC in plant stand was also assessed and results suggested low phototoxic and oxidative enzyme activities (catalase, CAT; superoxide dismutase, SOD; hydrogen peroxide, H₂O₂; malondialdehyde, MDA) in TFCWs. In summary, biochar addition and tidal flow operation played a significant role in oxidative- and microbial-mediated removals of TC in wastewater. This study provides an alternative strategy for the efficient removals of TC in constructed wetland systems and new insights into the toxic impact of pharmaceuticals on wetland plants.

Comparison of constructed wetland performance coupled with aeration and tubesettler for pharmaceutical compound removal from hospital wastewater

Pharmaceutical compounds being able to alter, retard, and enhance metabolism has gained attention in recent time as emerging pollutant. However, hospitals which are part of every urban landscape have yet to gain attention in terms of its hospital wastewater treatment to inhibit pharmaceutical compounds from reaching environment. Hence this study evaluated performance of constructed wetland in combination with tubesettler and aeration based on removal efficiency and ecological risk assessment (HQ). The removal efficiency of constructed wetland with plantation was higher by 31% (paracetamol), 102% (ibuprofen), 46%, (carbamazepine), 57% (lorazepam), 54% (erythromycin), 31% (ciprofloxacin) and 20% (simvastatin) against constructed wetland without plantation. Constructed wetland with aeration efficiency increased for paracetamol, ibuprofen, carbamazepine, lorazepam, erythromycin, ciprofloxacin, and simvastatin removal efficiency were higher by 58%, 130%, 52%, 79%, 107%, 57%, and 29% respectively. In constructed wetland with plantation, removal efficiency was higher by 20% (paracetamol), 13% (ibuprofen), 4% (carbamazepine), 14% (lorazepam), 34% (erythromycin), 19% (ciprofloxacin) and 7% (simvastatin). High ecological risk was observed for algae, invertebrate and fish with hazard quotient values in range of 2.5-484, 10-631 and 1-78 respectively. This study concludes that if space is the limitation at hospitals aeration with constructed wetland can be adopted. If space is available, constructed wetland with tubesettler is suitable, economic and environmentally friendly option. Future research works can focus on evaluating other processes combination with constructed wetland.

Seasonal changes driving shifts of aquatic rhizosphere microbial community structure and the functional properties

Ecological floating beds could enable roots to become suspended and this allowed submerged roots to harbour various types of microbes. But, there was a lack of systematic research on microbial community structure changes and the influencing mechanisms. In this study, the ecological floating beds were constructed using selected plants [Cyperus involucratus Rottboll (Cyp), Thalia dealbata Fraser (Tha) and Iris tectorum Maxim (Iri)] that was compared with a control group [static water (S)]. The results showed that the highest abundance and diversity of root microbial communities were found in autumn, with the dominant taxa being Proteobacteria, Actinobacteriota, Cyanobacteria, Chloroflexi, Firmicutes, Bacteroidota, and Acidobacteriota. The microbial communities of Tha and Cyp groups greatly overlapped, while the Iri and control groups exhibited distinctly diverse communities. The root microbial populations of the same plant also reflected a large change in different seasons. Conversely, photosynthetic autotrophs and specialized anaerobes were more inclined to thrive at higher temperatures and lower DO concentrations and then they gradually became the dominant species. Microbial co-occurrences of the Tha and control groups were complex and showed both cooperation and competition. In addition, TOC was an important environmental factor that shaped the microbial community structures and DO changed the microbial community by affecting the abundance of aerobic and anaerobic bacteria. Microorganisms showed potential for degradation and metabolism of non-food substances with low/no corresponding metabolic pathways.

Insights into the fate of antibiotics in constructed wetland systems: Removal performance and mechanisms

Antibiotics have been recognized as emerging contaminants that are widely distributed and accumulated in aquatic environment, posing a risk to ecosystem at trace level. Constructed wetlands (CWs) have been regarded as a sustainable and cost-effective alternative for efficient elimination of antibiotics. This review summarizes the removal of 5 categories of widely used antibiotics in CWs, and discusses the roles of the key components in CW system, i.e., substrate, macrophytes, and microorganisms, in removing antibiotics. Overall, the vertical subsurface flow CWs have proven to perform better in terms of antibiotic removal (>78%) compared to other single CWs. The adsorption behavior of antibiotics in wetland substrates is determined by the physicochemical properties of antibiotics, substrate configuration and operating parameters. The effects of wetland plants on antibiotic removal mainly include direct (e.g., plant uptake and degradation) and indirect (e.g., rhizosphere processes) manners. The possible interactions between microorganisms and antibiotics include biosorption, bioaccumulation and biodegradation. The potential strategies for further enhancement of the antibiotic removal performance in CWs included optimizing operation parameters, innovating substrate, strengthening microbial activity, and integrating with other treatment technologies. Taken together, this review provides useful information for facilitating the development of feasible, innovative and intensive antibiotic removal technologies in CWs, as well as enhancing the economic viability and ecological sustainability.

Cosmetic wastewater treatment technologies: a review

Over the past three decades, environmental concerns about the water pollution have been raised on societal and industrial levels. The presence of pollutants stemming from cosmetic products has been documented in wastewater streams outflowing from industrial as well as wastewater treatment plants. To this end, a series of consistent measures should be taken to prevent emerging contaminants of water resources. This need has driven the development of technologies, in an attempt to mitigate their impact on the environment. This work offers a thorough review of existing knowledge on cosmetic wastewater treatment approaches, including, coagulation, dissolved air flotation, adsorption, activated sludge, biodegradation, constructed wetlands, and advanced oxidation processes. Various studies have already documented the appearance of cosmetics in samples retrieved from wastewater treatment plants (WWTPs), which have definitely promoted our comprehension of the path of cosmetics within the treatment cycle; however, there are still multiple blanks to our knowledge. All treatments have, without exception, their own limitations, not only cost-wise, but also in terms of being feasible, effective, practical, reliable, and environmentally friendly.

Catalytic oxidation of 4-acetamidophenol with Fe3+-enhanced Cu0 particles: In-site generation and activation of hydrogen peroxide

Cu⁰ coupled with O₂ was used to degrade contaminant due to in-site generation and catalysis of H₂O₂, while the low reactivity and active dismutation reaction of Cu⁺ refrained the performance at acidic condition. In this study, the removal rate of 4-acetamidophenol increased from 27 % to 83.4 % with Fe³⁺ spiked into the Cu⁰ system within 60 min •OH was the primary reactive species in the Fe³⁺/Cu⁰ system. In the Fe³⁺/Cu⁰ system, Cu⁰ was corroded to form Cu⁺ by H⁺ and O₂, and then Cu⁺ interacted with O₂ generating H₂O₂, and meanwhile Fe³⁺ was reduced to Fe²⁺ by Cu⁺ and Cu⁰; Consequently, Cu⁺ and Fe²⁺ induced H₂O₂ to produce •OH, but Fe²⁺ was easier to catalyze H₂O₂ than Cu⁺ at acidic pH. Except for fulvic acid, common water matrix including sulfate ion, phosphate ion, chloride ion and nitrate ion had no inhibition effect on the degradation of 4-acetamidophenol in the Fe³⁺/Cu⁰ system. over 62 % of 4-acetamidophenol in tap water, Hou-lake water and well water was greatly oxidized by the Fe³⁺/Cu⁰ system. Furthermore, the amount of total dissolved copper decreased to 0.895 mg/L by the method of alkali precipitation in the Fe³⁺/Cu⁰ system. The study provided a theoretical direction to the Fe³⁺-enhanced Cu⁰ system for purifying wastewater.

Electrocatalytic degradation of sulfamethylthiadiazole by GAC@Ni/Fe three-dimensional particle electrode

In this work, GAC@Ni/Fe particle electrodes were prepared and employed for the degradation of sulfamethylthiadiazole (SMT) by three-dimensional electrocatalytic technology. The effects of particle electrode bi-metal loading ratio, cell voltage, particle electrode dosage, electrode plate spacing, and SMT initial concentration on SMT removal were studied. In addition, GAC@Ni/Fe particle electrode was analyzed by the scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), X-ray photoelectron spectrometer (XPS), and Fourier transform infrared spectrometer (FTIR) to characterize which indicated that a significant amount of iron-nickel oxide was formed on the surface of GAC@Ni/Fe particle electrode. The results indicated that when the nickel-iron loading ratio is 1:1, the SMT removal effect is the best, and the removal rate can reach 90.89% within 30 min. Compared with the granular activated carbon without bimetal, the removal efficiency is increased by 37.58%. The degradation of SMT in the GAC@Ni/Fe particle three-dimensional electrode reactor is the joint result of both direct oxidation and indirect oxidation. The contribution rates of direct oxidation of anode and particle electrode and indirect oxidation of ·OH in the degradation are 32%, 27%, and 41%, respectively. Based on the intermediate detected by ultra-high liquid chromatography and the calculation of bond energy of SMT molecule by Gauss software, the degradation pathway of SMT in the GAC@Ni/Fe three-dimensional electrode reactor is proposed. This research provides a green, healthy, and effective method for removing sulfonamide micro-polluted wastewater.

In-depth performance study of an innovative decentralized multistage constructed wetland system treating real institutional wastewater

The performance of an innovative decentralized multistage constructed wetland (DMCW) treating institutional wastewater is studied covering three seasons. The DMCW system with Canna lily efficiently removed organics contaminants like COD and BOD, and nutrients from the wastewater, showing its dependency on meteorological factors. Overall the performance is maximum in summer and least in monsoon, with a COD removal of 85.6% in summer followed by 82.5% in winter and 61.2% in monsoon. Removal of TSS (67.7-85.5%), PO₄^3--P (52.1-64.4%), NH₄⁺-N (56.6-71.6%), NO₃^--N (47.3-63.4%) and NO₂^--N (62-75.4%) were achieved along with heavy metals like Cr, Mn, Fe, Ni, Cu, Zn, As, Cd, Hg and Pb. Removal of pathogens like Vibrio is >98%, E. coli 95%, Pseudomonas 99%, and Aeromonas 63% was observed. Mass removal rate of COD was maximum in summer (97.3 g/m²/d) followed by winter (78.7 g/m²/d) and monsoon (43.5 g/m²/d). Majority of organics removal during the treatment was highlighted through Gas Chromatography-Mass Spectrometry (GCMS) and Fourier Transform Infrared Spectroscopy (FTIR) confirmed wastewater to be complex. The Canna lily accumulated various elements and oxides during the treatment with no stress on its health. The treated water quality is within the permissible limits and stands suitable for irrigational purposes. Better plant health and increased microbial diversity in the garden proves the suitability of treated water for irrigational activities. The results were validated using statistical tools like Mann-Whitney U test and principal component analysis.

Simultaneously enhanced removal of PAHs and nitrogen driven by Fe2+/Fe3+ cycle in constructed wetland through automatic tidal operation

The lack of dissolved oxygen and weak substrate removal capacity in constructed wetlands (CW) leads to terrible removal of nitrogen and polycyclic aromatic hydrocarbons (PAHs). In this study, automatic tidal flow CW microcosms were constructed by improving the oxygen environment (siphon and air-duct) and substrate (magnetite) to enhance purification performance and the mechanism was explored. The results showed that the addition of air-duct could improve the oxygen collection and thus improved the NH₄⁺ removal efficiency. Additionally, nitrogen removal was improved greatly due to the simultaneous nitrification and denitrification in aerobic layer with the addition of magnetite. Mass balance indicated the microbial degradation dominated (32-62%) the removal of PAHs. Metagenomic analysis proved the existence of magnetite enhanced the number of PAHs-degrading bacteria, functional groups and metabolic pathways and thus greatly improved the microbial degradation of PAHs. Furthermore, Fe²⁺/Fe³⁺ cycle played an important role in promoting the anaerobic degradation of PAHs, which might be served as an electron conduit to establish the direct interspecies electron transfer between iron-reducing bacteria (e.g. Deltaproteobacteria bacterium) and Anaerolineae bacterium to degrade PAHs efficiently. This study provided better understanding of the simultaneous removal of PAHs and nitrogen in tidal flow CWs.

Nitrogen-doped carbon nanosheets with Fe-based nanoparticles for highly efficient degradation of antibiotics and sulfate ion enhancement effect

Developing Fe-based catalysts with high-effective and environmentally friendly features in Fenton-like system for treating wastewater is still a challenge. Novel nitrogen-doped carbon nanosheets with Fe⁰/Fe₃C nano-particles (Fe@NCS-900) were prepared through a simple solvent-free strategy by pyrolyzing the mixture of 2,6-diaminopyridine and ferric chloride hexahydrate under 900 °C. The Fe@NCS-900 possessed almost 100% removal efficiency and 66.5% mineralization rate for the degradation of CBZ in 10 min. Moreover, the Fe@NCS-900 exhibited an apparent first-order constant as high as 0.8809 min^-1, which is 22 and 29 times higher than that of the commercial Fe⁰ and traditional Fenton system, respectively, which could be attribute to the high graphitization degree and rich nitrogen content. Besides, the results of the radical quenching experiments, electron paramagnetic resonance (EPR) and the probe experiments demonstrated that a large number of high valent iron species (Fe (IV)) besides singlet oxygen (¹O₂) and superoxide radicals (O₂^•-) existed and contributed to the CBZ degradation. More interestingly, the addition of coexisting anion SO₄^2- in the reaction system could significantly boost the concentration of •OH and SO₄^•- by 28.3 times and 9.7 times, respectively, resulting in the increase of the apparent first-order constant by 5.9 times (5.1733 min^-1), which was entirely different from previous reports that SO₄^2- had no effect on the catalytic activity or even displayed slightly inhibitory effect. In addition, the catalyst exhibited broad pH adaptability in the pH range of 2-9. The intermediate products of CBZ degradation were investigated by liquid chromatography mass spectrometry (LC-MS) and the degradation pathway was proposed. This paper provides new insights for developing a promising Fe-based nitrogen-doped catalyst for practical wastewater treatment.

Mechanistic Insight into Degradation of Cetirizine under UV/Chlorine Treatment: Experimental and Quantum Chemical Studies

UV/chlorine treatment is an efficient technology for removing organic pollutants in wastewater. Nevertheless, degradation of antihistamines in the UV/chlorine system, especially the underlying reaction mechanism, is not yet clear. In this study, the degradation of cetirizine (CTZ), a representative antihistamine, under UV/chlorine treatment was investigated. The results showed that CTZ could undergo fast degradation in the UV/chlorine system with an observed reaction rate constant (kobs) of (0.19 ± 0.01) min−1, which showed a first-increase and then-decrease trend with its initial concentration increased. The degradation of CTZ during the UV/chlorine treatment was attributed to direct UV irradiation (38.7%), HO• (35.3%), Cl• (7.3%), and ClO• (17.1%). The kobs of CTZ decreased with the increase in pH and the increase in concentrations of a representative dissolved organic matter, Suwannee River natural organic matter (SRNOM), due to their negative effects on the concentrations of reactive species generated in the UV/chlorine system. The detailed reaction pathways of HO•, ClO•, and Cl• with CTZ were revealed using quantum chemical calculation. This study provided significant insights into the efficient degradation and the underlying mechanism for the removal of CTZ in the UV/chlorine system.

Occurrence, transformation, bioaccumulation, risk and analysis of pharmaceutical and personal care products from wastewater: a review

Almost all aspects of society from food security to disease control and prevention have benefited from pharmaceutical and personal care products, yet these products are a major source of contamination that ends up in wastewater and ecosystems. This issue has been sharply accentuated during the coronavirus disease pandemic 2019 (COVID-19) due to the higher use of disinfectants and other products. Here we review pharmaceutical and personal care products with focus on their occurrence in the environment, detection, risk, and removal.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10311-022-01498-7.

A review on the role of plant in pharmaceuticals and personal care products (PPCPs) removal in constructed wetlands

Pharmaceuticals and personal care products (PPCPs) cause ongoing water pollution and consequently have attracted wide attention. Constructed wetlands (CWs) show good PPCP removal performance through combined processes of substrates, plants, and microorganisms; however, most published research focuses on the role of substrates and microorganisms. This review summarizes the direct and indirect roles of wetland plants in PPCP removal, respectively. These direct effects include PPCP precipitation on root surface iron plaque, and direct absorption and degradation by plants. Indirect effects, which appear more significant than direct effects, include enhancement of PPCP removal through improved rhizosphere microbial activities (more than twice as much as bulk soil) stimulated by radial oxygen loss and exudate secretions, and the formation of supramolecular ensembles from PPCPs and humic acids from decaying plant materials which improving PPCPs removal efficiency by up to four times. To clarify the internal mechanisms of PPCP removal by plants in CWs, factors affecting wetland plant performance were reviewed. Based on this review, future research needs have been identified.