Methods of reconstitution to investigate membrane protein function

In vitro reconstitution of transition metal transporters

Transition metal ions are critically important across all kingdoms of life. The chemical properties of iron, copper, zinc, manganese, cobalt, and nickel make them very attractive for use as cofactors in metalloenzymes and/or metalloproteins. Their versatile chemistry in aqueous solution enables them to function both as an electron donors and acceptors, and thus participate in both reduction and oxidation reactions respectively. Transition metal ions can also function as nonredox mutidentate coordination sites that play essential roles in macromolecular structure and function. Malfunction in transition metal transport and homeostasis has been linked to a wide number of human diseases including cancer, diabetes and neurodegenerative disorders. Transition metal transporters are central players in the physiology of transition metals whereby they move transition metals in and out of cellular compartments. In this review, we provide a comprehensive overview of in vitro reconstitution of the activity of integral membrane transition metal transporters and discuss strategies that have been successfully implemented to overcome the challenges. We also discuss recent advances in our understanding of transition metal transport mechanisms and the techniques that are currently employed to decipher the molecular basis of transport activities of these proteins. Deep mechanistic insights into transition metal transport systems will be essential to understand their malfunction in human diseases and target them for potential therapeutic strategies.

Determination of membrane protein orientation upon liposomal reconstitution down to the single vesicle level

Reconstitution of membrane proteins into liposomal membranes represents a key technique in enabling functional analysis under well-defined conditions. In this review, we provide a brief introduction to selected methods that have been developed to determine membrane protein orientation after reconstitution in liposomes, including approaches based on proteolytic digestion with proteases, site-specific labeling, fluorescence quenching and activity assays. In addition, we briefly highlight new strategies based on single vesicle analysis to address the problem of sample heterogeneity.

Biological responses to imazapic and methyl parathion pesticides in bioinspired lipid membranes and Tilapia fish

Pesticide misuse has well-documented detrimental effects on ecosystems, with Nile tilapia (Oreochromis niloticus) being particularly vulnerable. The current study focuses on the impact of widely used sugarcane crop pesticides, Imazapic (IMZ) and Methyl Parathion (MP), on tilapia gill tissues and their lipid membranes. This investigation was motivated by the specific role of the lipid membrane in transport regulation. Bioinspired cell membrane models, including Langmuir monolayers and liposomes (LUVs and GUVs), were utilized to explore the interaction of IMZ and MP. The results revealed electrostatic interactions between IMZ and MP and the polar head groups of lipids, inducing morphological alterations in the lipid bilayer. Tilapia gill tissue exposed to the pesticides exhibited hypertrophic increases in primary and secondary lamellae, total lamellar fusion, vasodilation, and lifting of the secondary lamellar epithelium. These alterations can lead to compromised oxygen absorption by fish and subsequent mortality. This study not only highlights the harmful effects of the pesticides IMZ and MP, but also emphasizes the crucial role of water quality in ecosystem well-being, even at minimal pesticide concentrations. Understanding these impacts can better inform management practices to safeguard aquatic organisms and preserve ecosystem health in pesticide-affected environments.

Rapid and Highly Stable Membrane Reconstitution by LAiR Enables the Study of Physiological Integral Membrane Protein Functions

Functional reintegration into lipid environments represents a major challenge for in vitro investigation of integral membrane proteins (IMPs). Here, we report a new approach, termed LMNG Auto-insertion Reintegration (LAiR), for reintegration of IMPs into lipid bilayers within minutes. The resulting proteoliposomes displayed an unprecedented capability to maintain proton gradients and long-term stability. LAiR allowed for monitoring catalysis of a membrane-bound, physiologically relevant polyisoprenoid quinone substrate by Escherichia coli cytochromes bo ₃ (cbo ₃) and bd (cbd) under control of the proton motive force. LAiR also facilitated bulk-phase detection and physiological assessment of the "proton leak" in cbo ₃, a controversial catalytic state that previously was only approachable at the single-molecule level. LAiR maintained the multisubunit integrity and higher-order oligomeric states of the delicate mammalian F-ATP synthase. Given that LAiR can be applied to both liposomes and planar membrane bilayers and is compatible with IMPs and lipids from prokaryotic and eukaryotic sources, we anticipate LAiR to be applied broadly across basic research, pharmaceutical applications, and biotechnology.

A comparative characterisation of commercially available lipid-polymer nanoparticles formed from model membranes

From the discovery of the first membrane-interacting polymer, styrene maleic-acid (SMA), there has been a rapid development of membrane solubilising polymers. These new polymers can solubilise membranes under a wide range of conditions and produce varied sizes of nanoparticles, yet there has been a lack of broad comparison between the common polymer types and solubilising conditions. Here, we present a comparative study on the three most common commercial polymers: SMA 3:1, SMA 2:1, and DIBMA. Additionally, this work presents, for the first time, a comparative characterisation of polymethacrylate copolymer (PMA). Absorbance and dynamic light scattering measurements were used to evaluate solubilisation across key buffer conditions in a simple, adaptable assay format that looked at pH, salinity, and divalent cation concentration. Lipid-polymer nanoparticles formed from SMA variants were found to be the most susceptible to buffer effects, with nanoparticles from either zwitterionic DMPC or POPC:POPG (3:1) bilayers only forming in low to moderate salinity (< 600 mM NaCl) and above pH 6. DIBMA-lipid nanoparticles could be formed above a pH of 5 and were stable in up to 4 M NaCl. Similarly, PMA-lipid nanoparticles were stable in all NaCl concentrations tested (up to 4 M) and a broad pH range (3-10). However, for both DIBMA and PMA nanoparticles there is a severe penalty observed for bilayer solubilisation in non-optimal conditions or when using a charged membrane. Additionally, lipid fluidity of the DMPC-polymer nanoparticles was analysed through cw-EPR, showing no cooperative gel-fluid transition as would be expected for native-like lipid membranes.

Synthetic Biology: Bottom-Up Assembly of Molecular Systems

The bottom-up assembly of biological and chemical components opens exciting opportunities to engineer artificial vesicular systems for applications with previously unmet requirements. The modular combination of scaffolds and functional building blocks enables the engineering of complex systems with biomimetic or new-to-nature functionalities. Inspired by the compartmentalized organization of cells and organelles, lipid or polymer vesicles are widely used as model membrane systems to investigate the translocation of solutes and the transduction of signals by membrane proteins. The bottom-up assembly and functionalization of such artificial compartments enables full control over their composition and can thus provide specifically optimized environments for synthetic biological processes. This review aims to inspire future endeavors by providing a diverse toolbox of molecular modules, engineering methodologies, and different approaches to assemble artificial vesicular systems. Important technical and practical aspects are addressed and selected applications are presented, highlighting particular achievements and limitations of the bottom-up approach. Complementing the cutting-edge technological achievements, fundamental aspects are also discussed to cater to the inherently diverse background of the target audience, which results from the interdisciplinary nature of synthetic biology. The engineering of proteins as functional modules and the use of lipids and block copolymers as scaffold modules for the assembly of functionalized vesicular systems are explored in detail. Particular emphasis is placed on ensuring the controlled assembly of these components into increasingly complex vesicular systems. Finally, all descriptions are presented in the greater context of engineering valuable synthetic biological systems for applications in biocatalysis, biosensing, bioremediation, or targeted drug delivery.

Application of polymersomes in membrane protein study and drug discovery: Progress, strategies, and perspectives

Membrane proteins (MPs) play key roles in cellular signaling pathways and are responsible for intercellular and intracellular interactions. Dysfunctional MPs are directly related to the pathogenesis of various diseases, and they have been exploited as one of the most sought-after targets in the pharmaceutical industry. However, working with MPs is difficult given that their amphiphilic nature requires protection from biological membrane or membrane mimetics. Polymersomes are bilayered nano-vesicles made of self-assembled block copolymers that have been widely used as cell membrane mimetics for MP reconstitution and in engineering of artificial cells. This review highlights the prevailing trend in the application of polymersomes in MP study and drug discovery. We begin with a review on the techniques for synthesis and characterization of polymersomes as well as methods of MP insertion to form proteopolymersomes. Next, we review the structural and functional analysis of the different types of MPs reconstituted in polymersomes, including membrane transport proteins, MP complexes, and membrane receptors. We then summarize the factors affecting reconstitution efficiency and the quality of reconstituted MPs for structural and functional studies. Additionally, we discuss the potential in using proteopolymersomes as platforms for high-throughput screening (HTS) in drug discovery to identify modulators of MPs. We conclude by providing future perspectives and recommendations on advancing the study of MPs and drug development using proteopolymersomes.

In Situ Assembly of Transmembrane Proteins from Expressed and Synthetic Components in Giant Unilamellar Vesicles

Reconstituting functional transmembrane (TM) proteins into model membranes is challenging due to the difficulty of expressing hydrophobic TM domains, which often require stabilizing detergents that can perturb protein structure and function. Recent model systems solve this problem by linking the soluble domains of membrane proteins to lipids, using noncovalent conjugation. Herein, we test an alternative solution involving the in vitro assembly of TM proteins from synthetic TM domains and expressed soluble domains using chemoselective peptide ligation. We developed an intein mediated ligation strategy to semisynthesize single-pass TM proteins in synthetic giant unilamellar vesicle (GUV) membranes by covalently attaching soluble protein domains to a synthetic TM polypeptide, avoiding the requirement for detergent. We show that the extracellular domain of programmed cell death protein 1, a mammalian immune checkpoint receptor, retains its ligand-binding function at a membrane interface after ligation to a synthetic TM peptide in GUVs, facilitating the study of receptor-ligand interactions.

Detergent-Free Functionalization of Hybrid Vesicles with Membrane Proteins Using SMALPs

Hybrid vesicles (HVs) that consist of mixtures of block copolymers and lipids are robust biomimetics of liposomes, providing a valuable building block in bionanotechnology, catalysis, and synthetic biology. However, functionalization of HVs with membrane proteins remains laborious and expensive, creating a significant current challenge in the field. Here, using a new approach of extraction with styrene-maleic acid (SMA), we show that a membrane protein (cytochrome bo₃) directly transfers into HVs with an efficiency of 73.9 ± 13.5% without the requirement of detergent, long incubation times, or mechanical disruption. Direct transfer of membrane proteins using this approach was not possible into liposomes, suggesting that HVs are more amenable than liposomes to membrane protein incorporation from a SMA lipid particle system. Finally, we show that this transfer method is not limited to cytochrome bo₃ and can also be performed with complex membrane protein mixtures.

Rapid Estimation of Membrane Protein Orientation in Liposomes

The topological organization of proteins embedded in biological membranes is crucial for the tight interplay between these enzymes and their accessibility to substrates in order to fulfil enzymatic activity. The orientation of a membrane protein reconstituted in artificial membranes depends on many parameters and is hardly predictable. Here, we present a convenient approach to assess this important property independent of the enzymatic activity of the reconstituted protein. Based on cysteine‐specific chemical modification of a target membrane protein with a cyanine fluorophore and a corresponding membrane‐impermeable fluorescence quencher, the novel strategy allows rapid evaluation of the distribution of the two orientations after reconstitution. The assay has been tested for the respiratory complexes bo₃ oxidase and ATP synthase of Escherichia coli and the results agree well with other orientation determination approaches. Given the simple procedure, the proposed method is a powerful tool for optimization of reconstitution conditions or quantitative orientation information prior to functional measurements.

Expression, purification and preliminary characterisation of the choline transporter LicB from opportunistic bacterial pathogens

Many opportunistic bacteria that infect the upper respiratory tract decorate their cell surface with phosphorylcholine to support colonisation and outgrowth. These surface modifications require the active import of choline from the host environment, a process thought to be mediated by a family of dedicated integral membrane proteins that act as choline permeases. Here, we present the expression and purification of the archetype of these choline transporters, LicB from Haemophilus influenzae. We show that LicB can be recombinantly produced in Escherichia coli and purified to homogeneity in a stable, folded state using the detergent n-dodecyl-β-d-maltopyranoside. Equilibrium binding studies with the fluorescent ligand dansylcholine suggest that LicB is selective towards choline, with reduced affinity for acetylcholine and no apparent activity towards other small molecules including glycine, carnitine and betaine. We also identify a conserved sequence motif within the LicB family and show that mutations within this motif compromise protein structure and function. Our results are consistent with previous observations that LicB is a specific high-affinity choline transporter, and provide an experimental platform for further studies of this permease family.

Lipid Membrane Mimetics in Functional and Structural Studies of Integral Membrane Proteins

Integral membrane proteins (IMPs) fulfill important physiological functions by providing cell-environment, cell-cell and virus-host communication; nutrients intake; export of toxic compounds out of cells; and more. However, some IMPs have obliterated functions due to polypeptide mutations, modifications in membrane properties and/or other environmental factors-resulting in damaged binding to ligands and the adoption of non-physiological conformations that prevent the protein from returning to its physiological state. Thus, elucidating IMPs' mechanisms of function and malfunction at the molecular level is important for enhancing our understanding of cell and organism physiology. This understanding also helps pharmaceutical developments for restoring or inhibiting protein activity. To this end, in vitro studies provide invaluable information about IMPs' structure and the relation between structural dynamics and function. Typically, these studies are conducted on transferred from native membranes to membrane-mimicking nano-platforms (membrane mimetics) purified IMPs. Here, we review the most widely used membrane mimetics in structural and functional studies of IMPs. These membrane mimetics are detergents, liposomes, bicelles, nanodiscs/Lipodisqs, amphipols, and lipidic cubic phases. We also discuss the protocols for IMPs reconstitution in membrane mimetics as well as the applicability of these membrane mimetic-IMP complexes in studies via a variety of biochemical, biophysical, and structural biology techniques.

Current problems and future avenues in proteoliposome research

Membrane proteins (MPs) are the gatekeepers between different biological compartments separated by lipid bilayers. Being receptors, channels, transporters, or primary pumps, they fulfill a wide variety of cellular functions and their importance is reflected in the increasing number of drugs that target MPs. Functional studies of MPs within a native cellular context, however, is difficult due to the innate complexity of the densely packed membranes. Over the past decades, detergent-based extraction and purification of MPs and their reconstitution into lipid mimetic systems has been a very powerful tool to simplify the experimental system. In this review, we focus on proteoliposomes that have become an indispensable experimental system for enzymes with a vectorial function, including many of the here described energy transducing MPs. We first address long standing questions on the difficulty of successful reconstitution and controlled orientation of MPs into liposomes. A special emphasis is given on coreconstitution of several MPs into the same bilayer. Second, we discuss recent progress in the development of fluorescent dyes that offer sensitive detection with high temporal resolution. Finally, we briefly cover the use of giant unilamellar vesicles for the investigation of complex enzymatic cascades, a very promising experimental tool considering our increasing knowledge of the interplay of different cellular components.

Functional integrity of membrane protein rhodopsin solubilized by styrene-maleic acid copolymer

Membrane proteins often require solubilization to study their structure or define the mechanisms underlying their function. In this study, the functional properties of the membrane protein rhodopsin in its native lipid environment were investigated after being solubilized with styrene-maleic acid (SMA) copolymer. The static absorption spectra of rhodopsin before and after the addition of SMA were recorded at room temperature to quantify the amount of membrane protein solubilized. The samples were then photobleached to analyze the functionality of rhodopsin upon solubilization. Samples with low or high SMA/rhodopsin ratios were compared to find a threshold in which the maximal amount of active rhodopsin was solubilized from membrane suspensions. Interestingly, whereas the highest SMA/rhodopsin ratios yielded the most solubilized rhodopsin, the rhodopsin produced under these conditions could not reach the active (Meta II) state upon photoactivation. The results confirm that SMA is a useful tool for membrane protein research, but SMA added in excess can interfere with the dynamics of protein activation.

Application of the SMALP technology to the isolation of GPCRs from low-yielding cell lines

The ability of styrene-maleic acid (SMAc) co-polymers to spontaneously insert into biological membranes can be exploited to extract G protein-coupled receptors (GPCRs) embedded in styrene-maleic acid lipid particles (SMALPs), preserving the native environment around the protein and thus enhancing the feasibility of functional studies. So far, the SMALP technology has been primarily employed on non-mammalian cells and protocols are not optimized for adherent human cell lines, which cannot be harvested in large amounts. In this work, a fine investigation of key parameters affecting the formation of SMALPs was undertaken with the purpose of maximizing the yield of extraction of a recombinant form of human β₂-adrenergic receptor (rhβ₂AR) from HEK293T cells. The study highlighted an important influence of ionic strength on the membrane solubilization efficiency and GPCR purification yield of SMAc co-polymers: by lowering the salt concentration of all buffers used in previously published SMALP protocols, the water solubility and extraction efficiency of the selected SMAc co-polymer (commercially supplied as a potassium salt) were enhanced. In-line combination of size-exclusion chromatography (SEC) with immobilized metal affinity chromatography (IMAC) allowed further improvement of the final rhβ₂AR yield by reducing the loss of SMALP-embedded GPCRs during the fractionation and purification of SMALPs. The overall findings of this study show that the available SMALP protocols can be significantly optimized in several aspects in order to increase the efficiency of GPCR solubilization and isolation from low-yielding expression systems.

Versatile Phospholipid Assemblies for Functional Synthetic Cells and Artificial Tissues

The bottom-up construction of a synthetic cell from nonliving building blocks capable of mimicking cellular properties and behaviors helps to understand the particular biophysical properties and working mechanisms of a cell. A synthetic cell built in this way possesses defined chemical composition and structure. Since phospholipids are native biomembrane components, their assemblies are widely used to mimic cellular structures. Here, recent developments in the formation of versatile phospholipid assemblies are described, together with the applications of these assemblies for functional membranes (protein reconstituted giant unilamellar vesicles), spherical and nonspherical protoorganelles, and functional synthetic cells, as well as the high-order hierarchical structures of artificial tissues. Their biomedical applications are also briefly summarized. Finally, the challenges and future directions in the field of synthetic cells and artificial tissues based on phospholipid assemblies are proposed.

Polymer-Encased Nanodiscs and Polymer Nanodiscs: New Platforms for Membrane Protein Research and Applications

Membrane proteins (MPs) are essential to many organisms’ major functions. They are notorious for being difficult to isolate and study, and mimicking native conditions for studies in vitro has proved to be a challenge. Lipid nanodiscs are among the most promising platforms for MP reconstitution, but they contain a relatively labile lipid bilayer and their use requires previous protein solubilization in detergent. These limitations have led to the testing of copolymers in new types of nanodisc platforms. Polymer-encased nanodiscs and polymer nanodiscs support functional MPs and address some of the limitations present in other MP reconstitution platforms. In this review, we provide a summary of recent developments in the use of polymers in nanodiscs.

Membrane protein crystallography in the era of modern structural biology

The aim of structural biology has been always the study of biological macromolecules structures and their mechanistic behaviour at molecular level. To achieve its goal, multiple biophysical methods and approaches have become part of the structural biology toolbox. Considered as one of the pillars of structural biology, X-ray crystallography has been the most successful method for solving three-dimensional protein structures at atomic level to date. It is however limited by the success in obtaining well-ordered protein crystals that diffract at high resolution. This is especially true for challenging targets such as membrane proteins (MPs). Understanding structure-function relationships of MPs at the biochemical level is vital for medicine and drug discovery as they play critical roles in many cellular processes. Though difficult, structure determination of MPs by X-ray crystallography has significantly improved in the last two decades, mainly due to many relevant technological and methodological developments. Today, numerous MP crystal structures have been solved, revealing many of their mechanisms of action. Yet the field of structural biology has also been through significant technological breakthroughs in recent years, particularly in the fields of single particle electron microscopy (cryo-EM) and X-ray free electron lasers (XFELs). Here we summarise the most important advancements in the field of MP crystallography and the significance of these developments in the present era of modern structural biology.

Non-full-length Water-Soluble CXCR4QTY and CCR5QTY Chemokine Receptors: Implication for Overlooked Truncated but Functional Membrane Receptors

It was posited that functionalities of GPCRs require full-length sequences that are negated by residue deletions. Here we report that significantly truncated nfCCR5^QTY and nfCXCR4^QTY still bind native ligands. Receptor-ligand interactions were discovered from yeast 2-hybrid screening and confirmed by mating selection. Two nfCCR5^QTY (SZ218a, SZ190b) and two nfCXCR4^QTY (SZ158a, SZ146a) were expressed in E. coli. Synthesized receptors exhibited α-helical structures and bound respective ligands with reduced affinities. SZ190b and SZ158a were reconverted into non-QTY forms and expressed in HEK293T cells. Reconverted receptors localized on cell membranes and functioned as negative regulators for ligand-induced signaling when co-expressed with full-length receptors. CCR5-SZ190b individually can perform signaling at a reduced level with higher ligand concentration. Our findings provide insight into essential structural components for CCR5 and CXCR4 functionality, while raising the possibility that non-full-length receptors may be resulted from alternative splicing and that pseudo-genes in genomes may be present and functional in living organisms.

•

Y2H screening reveals ligand interaction from truncated CXCR4 and CCR5 in QTY form

•

Truncated CCR5^QTY and CXCR4^QTY can be produced in E. coli and bind native ligands

•

Reconverted receptors localize on membranes and regulate cell signaling in HEK293

•

Our finding indicates potential presence and function for truncated receptors

Effects of Linker Flexibility and Conformational Changes of IP3 Receptor on Split Luciferase Complementation Assay

Background:

IP3-induced Ca2+ release, mediated by IP3R, is one of the most momentous cellular signaling mechanisms that regulate in a wide variety of essential cellular functions. Involvement of disrupted IP3 signaling pathways in numerous pathophysiology conditions is implicated to find the best methods for its measurement. Hence, several different biosensors have developed to monitor temporal changes of IP3 by using the IP3-binding domain of IP3 receptors.

Objectives:

Based on a previous study, we developed and characterized a series of bioluminescent biosensors using the human type-II IP3 receptor ligand binding domain (residues 1–604), named LAIRE (luminescent analyzer for IP3 receptor element) to study the effect of flexible and rigid linkers on the luminescence intensity of split luciferase. The effect of a mutation in IP3 binding residues and suppressor domain in the IP3 binding domain on luciferase complementary assay is also investigated.

Materials and Methods:

In the present study, first IP3-binding domain (residues 1-604) of IP3-receptor type 2 (LAIRE) was fused between complementary non-functional fragments of firefly luciferase and then the rigid linker sequence (LLRAIEAQQHLL), selected by ProDA database, introduced between Nluc and ligand binding domain and compared with that of the flexible linker ((GGGGS)2) in LAIRE chimera. The IP3-insensitive mutant of the biosensor was constructed using the Stratagene QuikChange® procedure. In order to the analysis of the dynamical movements of selected structures in the large-scale, coarse-graining method of molecular dynamics simulation (1µs) was applied.

Results:

As expected, the flexible linker brings two inactive fragments of luciferase together relative to the rigid linker and leads to complementation of luciferase activity, which is detected using luciferin. However, this conformational flexibility in linker increases background to noise ratio and attenuates fold induction.

Conclusions:

It seems that the ligand binding properties of IP3 binding core make it more suitable for the design of biosensor than the ligand binding domain.

Characterisation of Hybrid Polymersome Vesicles Containing the Efflux Pumps NaAtm1 or P-Glycoprotein

Investigative systems for purified membrane transporters are almost exclusively reliant on the use of phospholipid vesicles or liposomes. Liposomes provide an environment to support protein function; however, they also have numerous drawbacks and should not be considered as a "one-size fits all" system. The use of artificial vesicles comprising block co-polymers (polymersomes) offers considerable advantages in terms of structural stability; provision of sufficient lateral pressure; and low passive permeability, which is a particular issue for transport assays using hydrophobic compounds. The present investigation demonstrates strategies to reconstitute ATP binding cassette (ABC) transporters into hybrid vesicles combining phospholipids and the block co-polymer poly (butadiene)-poly (ethylene oxide). Two efflux pumps were chosen; namely the Novosphingobium aromaticivorans Atm1 protein and human P-glycoprotein (Pgp). Polymersomes were generated with one of two lipid partners, either purified palmitoyl-oleoyl-phosphatidylcholine, or a mixture of crude E. coli lipid extract and cholesterol. Hybrid polymersomes were characterised for size, structural homogeneity, stability to detergents, and permeability. Two transporters, NaAtm1 and P-gp, were successfully reconstituted into pre-formed and surfactant-destabilised hybrid polymersomes using a detergent adsorption strategy. Reconstitution of both proteins was confirmed by density gradient centrifugation and the hybrid polymersomes supported substrate dependent ATPase activity of both transporters. The hybrid polymersomes also displayed low passive permeability to a fluorescent probe (calcein acetomethoxyl-ester (C-AM)) and offer the potential for quantitative measurements of transport activity for hydrophobic compounds.

Membrane proteins in magnetically aligned phospholipid polymer discs for solid-state NMR spectroscopy

Well-hydrated phospholipid bilayers provide a near-native environment for membrane proteins. They enable the preparation of chemically-defined samples suitable for NMR and other spectroscopic experiments that reveal the structure, dynamics, and functional interactions of the proteins at atomic resolution. The synthetic polymer styrene maleic acid (SMA) can be used to prepare detergent-free samples that form macrodiscs with diameters greater than 30 nm at room temperature, and spontaneously align in the magnetic field of an NMR spectrometer at temperatures above 35 °C. Here we show that magnetically aligned macrodiscs are particularly well suited for solid-state NMR experiments of membrane proteins because the SMA-lipid assembly both immobilizes the embedded protein and provides uniaxial order for oriented sample (OS) solid-state NMR studies. We show that aligned macrodiscs incorporating four different membrane proteins with a wide range of sizes and topological complexity yield high-resolution OS solid-state NMR spectra. The work is dedicated to Michelle Auger who made key contributions to the field of membrane and membrane protein biophysics.

Designing minimalist membrane proteins

The construction of artificial membrane proteins from first principles is of fundamental interest and holds considerable promise for new biotechnologies. This review considers the potential advantages of adopting a strictly minimalist approach to the process of membrane protein design. As well as the practical benefits of miniaturisation and simplicity for understanding sequence-structure-function relationships, minimalism should also support the abstract conceptualisation of membrane proteins as modular components for synthetic biology. These ideas are illustrated with selected examples that focus upon α-helical membrane proteins, and which demonstrate how such minimalist membrane proteins might be integrated into living biosystems.

GPCR Solubilization and Quality Control

G protein-coupled receptors (GPCRs) are versatile membrane proteins involved in the regulation of many physiological processes and pathological conditions, making them interesting pharmacological targets. In order to study their structure and function, GPCRs are traditionally extracted from membranes using detergents. However, due to their hydrophobic nature, intrinsic instability in aqueous solutions, and their denaturing effects, the isolation of properly folded and functional GPCRs is not trivial. Therefore, it is of crucial importance to solubilize receptors under mild conditions and control the sample quality subsequently. Here we describe widely used methods for small-scale GPCR solubilization, followed by quality control based on fluorescence size-exclusion chromatography, SDS-PAGE, temperature-induced protein unfolding (CPM dye binding) and fluorescent ligand binding assay. These methods can easily be used to assess the thermostability and functionality of a GPCR sample exposed to different conditions, such as the use of various detergents, addition of lipids and ligands, making them valuable for obtaining an optimal sample quality for structural and functional studies.

Large-scale purification of functional human P-glycoprotein (ABCB1)

Human P-glycoprotein (P-gp) is an ATP-binding cassette transporter that has been implicated in altering the pharmacokinetics of anticancer drugs in normal tissues and development of multidrug resistance in tumor cells via drug efflux. There is still no definitive explanation of the mechanism by which P-gp effluxes drugs. One of the challenges of large-scale purification of membrane transporters is the selection of a suitable detergent for its optimal extraction from cell membranes. In addition, further steps of purification can often lead to inactivation and aggregation, decreasing the yield of purified protein. Here we report the large-scale purification of human P-gp expressed in High-Five insect cells using recombinant baculovirus. The purification strategies we present yield homogeneous functionally active wild type P-gp and its E556Q/E1201Q mutant, which is defective in carrying out ATP hydrolysis. Three detergents (1,2-diheptanoyol-sn-glycero-3-phosphocholine, dodecyl maltoside and n-octyl-β-d-glucopyranoside) were used to solubilize and purify P-gp from insect cell membranes. P-gp purification was performed first using immobilized metal affinity chromatography, then followed by a second step of either anion exchange chromatography or size exclusion chromatography to yield protein in concentrations of 2-12 mg/mL. Size exclusion chromatography was the preferred method, as it allows separation of monomeric transporters from aggregates. We show that the purified protein, when reconstituted in proteoliposomes and nanodiscs, exhibits both basal and substrate or inhibitor-modulated ATPase activity. This report thus provides a convenient and robust method to obtain large amounts of active homogeneously purified human P-gp that is suitable for biochemical, biophysical and structural characterization.

Macrodiscs Comprising SMALPs for Oriented Sample Solid-State NMR Spectroscopy of Membrane Proteins

Macrodiscs, which are magnetically alignable lipid bilayer discs with diameters of >30 nm, were obtained by solubilizing protein-containing liposomes with styrene-maleic acid copolymers. Macrodiscs provide a detergent-free phospholipid bilayer environment for biophysical and functional studies of membrane proteins under physiological conditions. The narrow resonance linewidths observed from membrane proteins in styrene-maleic acid macrodiscs advance structure determination by oriented sample solid-state NMR spectroscopy.

A Conformationally Gated Model of Methadone and Loperamide Transport by P-Glycoprotein

P-glycoprotein (Pgp) is a multidrug resistance transporter that limits the penetration of a wide range of neurotherapeutics into the brain including opioids. The diphenylpropylamine opioids methadone and loperamide are structurally similar, but loperamide has about a 4-fold higher Pgp-mediated transport rate. In addition to these differences, they showed significant differences in their effects on Pgp-mediated adenosine triphosphate (ATP) hydrolysis. The activation of Pgp-mediated ATP hydrolysis by methadone was monophasic, whereas loperamide activation of ATP hydrolysis was biphasic implying methadone has a single binding site and loperamide has 2 binding sites on Pgp. Quenching of tryptophan fluorescence with these drugs and digoxin showed competition between the opioids and that loperamide does not compete for the digoxin-binding site. Acrylamide quenching of tryptophan fluorescence to probe Pgp conformational changes revealed that methadone- and loperamide-induced conformational changes were distinct. These results were used to develop a model for Pgp-mediated transport of methadone and loperamide where opioid binding and conformational changes are used to explain the differences in the opioid transport rates between methadone and loperamide.