Towards toxicokinetic modelling of aluminium exposure from adjuvants in medicinal products

Calcium kinetic rates in Caucasian males and females from birth to adulthood

Calcium plays an important role in bone physiology and its kinetics change over lifetime. The analysis of calcium deposition and release through stable isotope techniques has guided recommendations on nutritional uptake for overall health. In addition, calcium kinetics have great relevance for toxicokinetic studies of bone-seeking elements (e.g, aluminium and lead) since these elements use common uptake and release pathways. While the impact of many factors on calcium kinetics have been investigated individually, a consolidated age- and sex-dependent kinetic description amenable for toxicokinetic modeling, however, is still lacking. Motivated by this need, we systematically reviewed the existing literature on calcium kinetics and assembled a large and consistent dataset. Then, building on the work of O'Flaherty in the 1990s, we formulated age- and sex-dependent functions describing calcium deposition, release, net retention, and mass. This description represents the current knowledge on calcium kinetics in a reference individual of Caucasians as most data was from this population.

Novel adjuvants in allergen-specific immunotherapy: where do we stand?

Type I hypersensitivity, or so-called type I allergy, is caused by Th2-mediated immune responses directed against otherwise harmless environmental antigens. Currently, allergen-specific immunotherapy (AIT) is the only disease-modifying treatment with the potential to re-establish clinical tolerance towards the corresponding allergen(s). However, conventional AIT has certain drawbacks, including long treatment durations, the risk of inducing allergic side effects, and the fact that allergens by themselves have a rather low immunogenicity. To improve AIT, adjuvants can be a powerful tool not only to increase the immunogenicity of co-applied allergens but also to induce the desired immune activation, such as promoting allergen-specific Th1- or regulatory responses. This review summarizes the knowledge on adjuvants currently approved for use in human AIT: aluminum hydroxide, calcium phosphate, microcrystalline tyrosine, and MPLA, as well as novel adjuvants that have been studied in recent years: oil-in-water emulsions, virus-like particles, viral components, carbohydrate-based adjuvants (QS-21, glucans, and mannan) and TLR-ligands (flagellin and CpG-ODN). The investigated adjuvants show distinct properties, such as prolonging allergen release at the injection site, inducing allergen-specific IgG production while also reducing IgE levels, as well as promoting differentiation and activation of different immune cells. In the future, better understanding of the immunological mechanisms underlying the effects of these adjuvants in clinical settings may help us to improve AIT.

Inflammation and Autophagy: A Convergent Point between Autism Spectrum Disorder (ASD)-Related Genetic and Environmental Factors: Focus on Aluminum Adjuvants

Autism spectrum disorder (ASD), schizophrenia, and bipolar disorder are genetically complex and heterogeneous neurodevelopmental disorders (NDDs) resulting from genetic factors and gene-environment (GxE) interactions for which onset occurs in early brain development. Recent progress highlights the link between ASD and (i) immunogenetics, neurodevelopment, and inflammation, and (ii) impairments of autophagy, a crucial neurodevelopmental process involved in synaptic pruning. Among various environmental factors causing risk for ASD, aluminum (Al)-containing vaccines injected during critical periods have received special attention and triggered relevant scientific questions. The aim of this review is to discuss the current knowledge on the role of early inflammation, immune and autophagy dysfunction in ASD as well as preclinical studies which question Al adjuvant impacts on brain and immune maturation. We highlight the most recent breakthroughs and the lack of epidemiological, pharmacokinetic and pharmacodynamic data constituting a "scientific gap". We propose additional research, such as genetic studies that could contribute to identify populations at genetic risk, improving diagnosis, and potentially the development of new therapeutic tools.

Physiology-based toxicokinetic modelling of aluminium in rat and man

A sufficient quantitative understanding of aluminium (Al) toxicokinetics (TK) in man is still lacking, although highly desirable for risk assessment of Al exposure. Baseline exposure and the risk of contamination severely limit the feasibility of TK studies administering the naturally occurring isotope 27Al, both in animals and man. These limitations are absent in studies with 26Al as a tracer, but tissue data are limited to animal studies. A TK model capable of inter-species translation to make valid predictions of Al levels in humans-especially in toxicological relevant tissues like bone and brain-is urgently needed. Here, we present: (i) a curated dataset which comprises all eligible studies with single doses of 26Al tracer administered as citrate or chloride salts orally and/or intravenously to rats and humans, including ultra-long-term kinetic profiles for plasma, blood, liver, spleen, muscle, bone, brain, kidney, and urine up to 150 weeks; and (ii) the development of a physiology-based (PB) model for Al TK after intravenous and oral administration of aqueous Al citrate and Al chloride solutions in rats and humans. Based on the comprehensive curated 26Al dataset, we estimated substance-dependent parameters within a non-linear mixed-effect modelling context. The model fitted the heterogeneous 26Al data very well and was successfully validated against datasets in rats and humans. The presented PBTK model for Al, based on the most extensive and diverse dataset of Al exposure to date, constitutes a major advancement in the field, thereby paving the way towards a more quantitative risk assessment in humans.

Venom Immunotherapy: From Proteins to Product to Patient Protection

In this review, we outline and reflect on the important differences between allergen-specific immunotherapy for inhalant allergies (i.e., aeroallergens) and venom-specific immunotherapy (VIT), with a special focus on Venomil® Bee and Wasp. Venomil® is provided as a freeze-dried extract and a diluent to prepare a solution for injection for the treatment of patients with IgE-mediated allergies to bee and/or wasp venom and for evaluating the degree of sensitivity in a skin test. While the materials that make up the product have not changed, the suppliers of raw materials have changed over the years. Here, we consolidate relevant historical safety and efficacy studies that used products from shared manufacture supply profiles, i.e., products from Bayer or Hollister-Stier. We also consider the characterization and standardization of venom marker allergens, providing insights into manufacturing controls that have produced stable and consistent quality profiles over many years. Quality differences between products and their impacts on treatment outcomes have been a current topic of discussion and further research. Finally, we review the considerations surrounding the choice of depot adjuvant most suitable to augmenting VIT.

Derivation of Biomonitoring Equivalents for aluminium for the interpretation of population-level biomonitoring data

Aluminium is widely used in many consumer products, however the primary source of aluminium exposure to the Canadian general population is through food. Aluminium can cause neurotoxicity and reproductive toxicity at elevated exposure levels. Health-based exposure guidance values have been established for oral exposure to aluminium, including a Minimal Risk Level (MRL) by the Agency for Toxic Substances and Disease Registry (ATSDR), a Provincial Tolerable Weekly Intake (PTWI) by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) and a Tolerable Weekly Intake (TWI) by the European Food Safety Authority (EFSA). Aluminium concentration in blood and urine can be used as a tool for exposure characterization in a population. A pharmacokinetic (PK) model was developed based on human dosing data to derive blood Biomonitoring Equivalents (BEs), whereas a mass balance approach was used to derive urine BEs for the above guidance values. The BEs for blood for daily intake consistent with the MRL, PTWI and TWI were 18, 16 and 8 μg/L, respectively. BEs for urine for the same guidance values were 137, 123 and 57 μg/L, respectively. The derived BEs may be useful in interpreting population-level biomonitoring data in a health risk context and thereby screening and prioritizing substances for human health risk assessment and risk management.

Aluminum reproductive toxicity: a summary and interpretation of scientific reports

Publications addressing aluminum (Al)-induced reproductive toxicity were reviewed. Key details were compiled in summary tables. Approximate systemic Al exposure, a measure of bioavailability, was calculated for each exposure, based on the Al percentage in the dosed Al species, Al bioavailability, and absorption time course reports for the exposure route. This was limited to laboratory animal studies because no controlled-exposure human studies were found. Intended Al exposure was compared to unintended dietary Al exposure. The considerable and variable Al content of laboratory animal diets creates uncertainty about reproductive function in the absence of Al. Aluminum-induced reproductive toxicity in female mice and rats was evident after exposure to ≥25-fold the amount of Al consumed in the diet. Generally, the additional daily Al systemic exposure of studies that reported statistically significant results was greater than 100-fold above the typical human daily Al dietary consumption equivalent. Male reproductive endpoints were significantly affected after exposure to lower levels of Al than females. Increased Al intake increased fetus, placenta, and testes Al concentrations, to a greater extent in the placenta than fetus, and, in some cases, more in the testes than placenta. An adverse outcome pathway (AOP) was constructed for males based on the results of the reviewed studies. The proposed AOP includes oxidative stress as the molecular initiating event and increased malondialdehyde, DNA and spermatozoal damage, and decreased blood testosterone and sperm count as subsequent key events. Recommendations for the design of future studies of reproductive outcomes following exposure to Al are provided.

State-of-the-art in marketed adjuvants and formulations in Allergen Immunotherapy: A position paper of the European Academy of Allergy and Clinical Immunology (EAACI)

Since the introduction of allergen immunotherapy (AIT) over 100 years ago, focus has been on standardization of allergen extracts, with reliable molecular composition of allergens receiving the highest attention. While adjuvants play a major role in European AIT, they have been less well studied. In this Position Paper, we summarize current unmet needs of adjuvants in AIT citing current evidence. Four adjuvants are used in products marketed in Europe: aluminium hydroxide (Al(OH)₃ ) is the most frequently used adjuvant, with microcrystalline tyrosine (MCT), monophosphoryl lipid A (MPLA) and calcium phosphate (CaP) used less frequently. Recent studies on humans, and using mouse models, have characterized in part the mechanisms of action of adjuvants on pre-existing immune responses. AIT differs from prophylactic vaccines that provoke immunity to infectious agents, as in allergy the patient is presensitized to the antigen. The intended mode of action of adjuvants is to simultaneously enhance the immunogenicity of the allergen, while precipitating the allergen at the injection site to reduce the risk of anaphylaxis. Contrasting immune effects are seen with different adjuvants. Aluminium hydroxide initially boosts Th2 responses, while the other adjuvants utilized in AIT redirect the Th2 immune response towards Th1 immunity. After varying lengths of time, each of the adjuvants supports tolerance. Further studies of the mechanisms of action of adjuvants may advise shorter treatment periods than the current three-to-five-year regimens, enhancing patient adherence. Improved lead compounds from the adjuvant pipeline are under development and are explored for their capacity to fill this unmet need.

Re-evaluation of aluminium sulphates (E 520-523) and sodium aluminium phosphate (E 541) as food additives

The Panel on Food Additives and Nutrient Sources added to Food (ANS) provided a scientific opinion re-evaluating the safety of aluminium sulphates (E 520-523) and sodium aluminium phosphate, acidic (E 541) as food additives. The Panel considered that adequate exposure and toxicity data were available. Aluminium sulphates (E 520-523) and sodium aluminium phosphate, acidic (E 541) are permitted as food additives in only a few specific products and the exposure is probably near zero. Aluminium compounds have low bioavailability and low acute toxicity. There is no concern with respect to genotoxicity and carcinogenicity. The no observed adverse effect level (NOAEL) for aluminium compounds in subchronic studies was 52 mg Al/kg body weight (bw) per day in rats and 90 mg Al/kg bw per day in dogs and the lowest NOAEL for neurotoxicity in rats was 30 mg Al/kg bw per day and for developing nervous system was 10-42 mg Al/kg bw per day in studies in mice and rats. The Panel concluded that aluminium sulphates (E 520-523) and sodium aluminium phosphate, acidic (E 541) are of no safety concern in the current authorised uses and use levels.

Cell-based in vitro models in environmental toxicology: a review

An analysis of biological effects induced by environmental toxins and exposure-related evaluation of potential risks for health and environment represent central tasks in classical biomonitoring. While epidemiological data and population surveys are clearly the methodological frontline of this scientific field, cellbased in vitro assays provide information on toxin-affected cellular pathways and mechanisms, and are important sources for the identification of relevant biomarkers. This review provides an overview on currently available in vitro methods based on cultured cells, as well as some limitations and considerations that are of specific interest in the context of environmental toxicology. Today, a large number of different endpoints can be determined to pinpoint basal and specific toxicological cellular effects. Technological progress and increasingly refined protocols are extending the possibilities of cell-based in vitro assays in environmental toxicology and promoting their increasingly important role in biomonitoring.