Failure rates of metal-on-metal hip resurfacings: analysis of data from the National Joint Registry for England and Wales

Cobalt ions induce a cellular senescence secretory phenotype in human synovial fibroblast-like cells that may be an early event in the development of adverse local tissue reactions to hip implants

Objectives

Total hip arthroplasty is a successful procedure for treating advanced osteoarthritis (OA). Metal bearing surfaces remain one of the most widely implanted prosthesis, however approximately 10% of patients develop adverse local tissue reactions (ALTRs), namely lymphocytic predominant soft tissue reaction with or without necrosis and osteolysis resulting in high revision rates. The mechanism(s) for these reactions remains unclear although T lymphocyte mediated type IV hypersensitivity to cobalt (Co) and chromium (Cr) ions have been described. The purpose of this study was to determine the prolonged effects of Co and Cr metal ions on synovial fibroblasts to better understand the impact of the synovial membrane in the development of ALTRs.

Methods

Human synovial fibroblast-like cells were isolated from donors undergoing arthroplasty. DNA content and Alamar blue assay were used to determine cellular viability against exposure to Co and Cr. A beta-galactosidase assay was used to determine the development of cellular senescence. Western blotting and RT-qPCR were employed to determine changes in senescent associated secretory factors, signaling and anti-oxidant enzyme expression. A fluorescent assay was used to measure accumulation of hydrogen peroxide.

Results

We demonstrate that prolonged cobalt exposure results in a downregulation of the enzyme catalase resulting in cytosolic accumulation of hydrogen peroxide, decreased Akt activity and cellular senescence. Senescent fibroblasts demonstrated upregulation of proinflammatory cytokines IL-1β and TNFα in addition to the neurotrophic factor NGF.

Conclusion

Our results provide evidence that metal ions induce a senescent associated secretory phenotype in synovial fibroblasts that could contribute to the development of adverse local tissue reactions.

No Difference in Revision Rates and High Survival Rates in Large-head Metal-on-metal THA Versus Metal-on-polyethylene THA: Long-term Results of a Randomized Controlled Trial

BACKGROUND

Pseudotumor formation is a well-known complication in metal-on-metal (MoM) THA. Pseudotumors combined with elevated serum ion levels and complaints from patients can lead to high revision rates. Long-term (> 10 years) results obtained from randomized trials comparing large-head MoM THA and conventional metal-on-polyethylene (MoP) THA are lacking regarding revision and survival rates, pseudotumor formation, functional outcomes, and serum ion levels.

QUESTIONS/PURPOSES

At 10 years of follow-up, (1) what is the difference in survival and revision rates between large-head (38 to 60 mm) MoM THA and conventional 28-mm MoP THA? (2) What is the difference in pseudotumor formation between large-head MoM THA and MoP THA? (3) Is there a difference in functional outcome between large-head MoM THA and MoP THA? (4) What is the difference in serum ion levels between large-head MoM THA and MoP THA?

METHODS

Between January 2006 and December 2008, 104 patients were randomized to receive either cementless MoM THA (50 patients) or cementless MoP THA (54 patients). In all, 78% (81 of 104) of patients completed the 10-year postoperative follow-up: 36 patients with MoM THA (72%; six patients lost to follow-up) and 45 with MoP THA (83%; four lost to follow-up). In the MoM group, 47% (17) were men, and the patients had a mean ± SD age of 60 ± 5 years. In the MoP group, 38% (17) were men, and the patients had a mean age of 61 ± 5 years. All baseline characteristics were similar between the groups. At 10 years of follow-up, all patient records were screened for revision surgery or complications, and the primary endpoint was survivorship free from revision for any cause at the 10-year follow-up interval, which we analyzed using a Kaplan-Meier survival analysis. All patients had a CT scan to determine the pseudotumor classification, which was reviewed by an independent radiologist. Functional outcome was measured using the patient-reported Oxford Hip Score and Harris Hip Score; the latter was assessed by a blinded nurse practitioner. Finally, serum ion cobalt and chrome concentrations were measured at 10 years postoperatively. Because the a priori sample size calculation for this randomized controlled trial was based on a different endpoint, a post hoc power analysis was performed for this long-term follow-up study, with survival as the primary outcome. It showed that considering the number of included patients, this study would have sufficient power (one-sided testing, alpha 0.05, power 80%) to discern a difference of 20% in the survival rate between the MoP and MoM groups (95% versus 75%).

RESULTS

With the numbers available, there was no difference in survivorship free from revision for any cause between the MoP group and MoM group at 10 years (95% [95% CI 85% to 98%] versus 92% [95% CI 82% to 98%]; p = 0.6). A higher percentage of patients in the MoM group had pseudotumors on CT than those in the MoP group did, but pseudotumors were observed in both groups (56% [20 of 36] in the MoM group versus 22% [10 of 45] in the MoP group, relative risk 1.8 [95% CI 1.2 to 2.6]; p = 0.002). A higher proportion of elevated cobalt and chrome levels was found in the MoM group (19% and 14%, respectively) than in the MoP group (0% for both cobalt and chrome) (cobalt: RR 1.2 [95% CI 1.1 to 1.5]; p = 0.002; chrome: RR 1.2 [95% CI 1.0 to 1.3]; p = 0.01). In 25% of the patients with pseudotumors (5 of 20 patients), there were elevated serum cobalt levels. None of the 23 patients without pseudotumors had elevated cobalt levels (RR 1.3 [95% CI 1.0 to 1.7]; p = 0.01). There was no difference in functional outcome between study groups, nor a difference between patients with a pseudotumor and those without.

CONCLUSION

This study showed that the survival of patients with large-head MoM THA was high and comparable to that of those with MoP THA, which contrasts with the high revision rates reported by others. Although some patients with MoP THAs experienced pseudotumors, the risk of a pseudotumor was much greater in MoM hips, and serum ion levels were higher in patients who received an MoM THA. For these reasons and unknown future complications, continued surveillance of patients with MoM THAs seems important.

LEVEL OF EVIDENCE

Level I, therapeutic study.

Revision of metal-on-metal hip replacements with dual-mobility bearings and acetabular component retention

Aims

In metal-on-metal (MoM) hip arthroplasties and resurfacings, mechanically induced corrosion can lead to elevated serum metal ions, a local inflammatory response, and formation of pseudotumours, ultimately requiring revision. The size and diametral clearance of anatomical (ADM) and modular (MDM) dual-mobility polyethylene bearings match those of Birmingham hip MoM components. If the acetabular component is satisfactorily positioned, well integrated into the bone, and has no surface damage, this presents the opportunity for revision with exchange of the metal head for ADM/MDM polyethylene bearings without removal of the acetabular component.

Methods

Between 2012 and 2020, across two centres, 94 patients underwent revision of Birmingham MoM hip arthroplasties or resurfacings. Mean age was 65.5 years (33 to 87). In 53 patients (56.4%), the acetabular component was retained and dual-mobility bearings were used (DM); in 41 (43.6%) the acetabulum was revised (AR). Patients underwent follow-up of minimum two-years (mean 4.6 (2.1 to 8.5) years).

Results

In the DM group, two (3.8%) patients underwent further surgery: one (1.9%) for dislocation and one (1.9%) for infection. In the AR group, four (9.8%) underwent further procedures: two (4.9%) for loosening of the acetabular component and two (4.9%) following dislocations. There were no other dislocations in either group. In the DM group, operating time (68.4 vs 101.5 mins, p < 0.001), postoperative drop in haemoglobin (16.6 vs 27.8 g/L, p < 0.001), and length of stay (1.8 vs 2.4 days, p < 0.001) were significantly lower. There was a significant reduction in serum metal ions postoperatively in both groups (p < 0.001), although there was no difference between groups for this reduction (p = 0.674 (cobalt); p = 0.186 (chromium)).

Conclusion

In selected patients with Birmingham MoM hips, where the acetabular component is well-fixed and in a satisfactory position with no surface damage, the metal head can be exchanged for polyethylene ADM/MDM bearings with retention of the acetabular prosthesis. This presents significant benefits, with a shorter procedure and a lower risk of complications.

The use of dual mobility cups in revision total hip arthroplasty for failed large head metal-on-metal bearings

PURPOSE

Revision of failed large head metal-on-metal (MoM) total hip arthroplasty (THA) is a challenging procedure particularly to reconstruct acetabular bone defect due to osteolysis and to achieve hip stability due to soft tissue damages, both potentially caused by adverse reaction to metal debris (ARMD). This study aimed to evaluate the outcome of dual mobility cup (DMC) constructs in revision THA for failed large head MoM bearings with a special attention to the occurrence of dislocation or re-revision.

METHODS

Between 2015 and 2019, 57 patients (64 THAs, 41 men, mean age = 65 ± 10 years) underwent revision for MoM THA with the use of DMC were prospectively included in our total joint registry. Mean time to revision was 11 ± 2.5 years. The causes for revision were adverse reaction to metal debris (ARMD) in 49 THAs (76%), painful hip with elevated blood cobalt-chromium ions in seven (11%), and acetabular aseptic loosening in eight (13%). The revision was complete in 22 THAs (34%) and acetabular only in 42 (66%). Clinical and radiographic outcomes, complications, and re-revisions were evaluated at most recent follow-up.

RESULTS

At mean follow-up of six ± 1.5 years, the pre- to postoperative Harris Hip Score improved from 74 ± 19 to 92 ± 4 (p = 0.004). Complications occurred in 11 cases (17%): five dislocations (8%), three periprosthetic infections (5%), two aseptic loosening of the acetabular component (3%), and two periprosthetic fractures (3%). Re-revision was required in six cases (9%).

CONCLUSION

The use of DMC is a reliable option to prevent instability and ensure a stable acetabular reconstruction in revision THA for failed large head MoM bearings. However, dislocation after revision remains a concern, particularly in cases of severe soft tissue damage related to ARMD.

Hip resurfacing: case closed? A bibliometric analysis of the past 10 years

INTRODUCTION

Hip resurfacing (HR) was introduced as a potential alternative to total hip arthroplasty (THA), indicated predominantly for younger, high demand patients. The modern metal-on-metal implant was popularized in the 1990s and early 2000s and promised greater wear resistance. However, its popularity waned due to increased rates of complications related to metal toxicity including pseudo-tumors as well as the recall of many resurfacing implants. The purpose of this study was to conduct a bibliometric analysis and investigate the current trends in hip resurfacing literature.

METHODS

Using the keywords "hip resurfacing," publications between 2012 and 2022 were identified on Web of Science Core Collection of Clarivate Analytics. Results were screened for relevance by three independent reviewers using title, abstract, and full text. The retrieved data were evaluated by the bibliometric method. Included articles were imported into CiteSpace 5.7.R1, 64-bit (Drexel University, Philadelphia, PA, USA), VOSviewer 1.6.15 (Leiden University, Leiden, the Netherlands), and the Online Analysis Platform of Literature Metrology to identify trends in publication.

RESULTS

Search terms yielded 1200 results and 724 were included in final analysis. A steady decrease of publications was noted over the past decade with less than 40 articles published in 2020 and 2021. The Journal of Hip Arthroplasty (92), Hip International (74), and Clinical Orthopaedics and Related Research (54) published the most articles. Authors from the United States and the United Kingdom published the most studies. High-frequency keywords in co-occurrence and co-cited cluster analysis were metal-on-metal, metal ions, wear, pseudo-tumor, and revision, demonstrating that long-term concerns have been the focus of most recent studies.

CONCLUSION

In conclusion, our bibliometric analysis allowed novel exploration and identification of the current research trends, contributions, and the distribution of publications exploring HR. The understanding of HR and the poor long-term outcomes of some resurfacing implants has improved significantly over the past decade, with the most recent focus on failure rates and long-term complications from metal debris. However, the breadth of literature has steadily declined in the past decade, and ultimately demonstrates the decline of scientific interest and focus on novel areas in hip resurfacing and a potential reached consensus.

Metal-on-Metal Hip Arthroplasty: A Comprehensive Review of the Current Literature

Metal-on-metal (MoM) total hip arthroplasty has been widely used since the end of the 20th century, although rates have now decreased due to concerns regarding adverse reactions and failure rates. The MoM implant has been replaced with other materials, such as ceramic-on-ceramic (CoC) and metal-on-polyethylene (MoP). This literature review looks at the past and present use of MoM prostheses to assess whether the turn away from MoM use is justified. Online literature searches were performed on PubMed, Ovid Medical Literature Analysis and Retrieval System Online (MEDLINE), and Web of Science online databases using the search terms "MoM and (ARMD and ALVAL)" (ARMD: adverse reaction to metal debris; ALVAL: aseptic lymphocyte-dominant vasculitis-associated lesion). A total of 64 relevant titles were included in the review. Although risk factors for adverse reactions and the causes of ARMD are generally agreed upon, more work is required to further understand the specific thresholds of blood metal ion levels that can be used to consistently identify ARMD and excessive metal wear-debris in patients who have not had their MoM implants revised. Metal-on-metal devices are not an acceptable option for total hip arthroplasties (THAs) in their current formulation due to the high rate and risk of ARMD. Some MoM hip resurfacing operations are appropriate for very carefully selected patients who are fully aware of the risks posed by the implant. It is recommended that device-specific thresholds for metal ion levels be developed to identify patients at risk of ARMD locally and systemically while using auxiliary tools to assist diagnosis, such as metal artefact reduction sequences (MARS)-MRI and hip scoring tools. Further work should investigate device-specific blood metal ion levels, the systemic effects of raised metal ion concentrations secondary to MoM arthroprosthetic wear, and the potential risks of ARMD caused by wear from tapered stems (including the implications this has for patients with CoC and MoP prostheses).

Comparisons of in-hospital complications between total hip arthroplasty and hip resurfacing arthroplasty

BACKGROUND

Hip resurfacing arthroplasty (HRA) is a less common but effective alternative method to total hip arthroplasty (THA) for hip reconstruction. In this study, we investigated the incidences of in-hospital complications between patients who had been subjected to THA and HRA.

METHODS

The National Inpatient Sample data that had been recorded from 2005 to 2014 was used in this study. Based on the International Classification of Disease, Ninth Revision, Clinical Modification, patients who underwent THA or HRA were included. Data on demographics, preoperative comorbidities, length of hospital stay, total charges, and in-hospital mortality and complications were compared. Multiple logistic regression analysis was used to determine whether different surgical options are independent risk factors for postoperative complications.

RESULTS

A total of 537,506 THAs and 9,744 HRAs were obtained from the NIS database. Patients who had been subjected to HRA exhibited less preoperative comorbidity rates, shorter length of stay and extra hospital charges. Moreover, HRA was associated with more in-hospital prosthesis loosening. Notably, patients who underwent HRA were younger and presented less preoperative comorbidities but did not show lower incidences in most complications.

CONCLUSIONS

The popularity of HRA gradually reduced from the year 2005 to 2014. Patients who underwent HRA were more likely to be younger, male, have less comorbidities and spend more money on medical costs. The risk of in-hospital prosthesis loosening after HRA was higher. The HRA-associated advantages with regards to most in-hospital complications were not markedly different from those of THA. In-hospital complications of HRA deserve more attention from surgeons.

Evidence-based objective performance criteria for the evaluation of hip and knee replacement devices and technologies

BACKGROUND

Objective performance criteria (OPC) is a novel method to provide minimum performance standards and improve the regulated introduction of original or incremental device innovations in order to prevent patients from being exposed to potentially inferior designs whilst allowing timely access to improvements. We developed 2-year safety and effectiveness OPC for total hip and knee replacement (THR and TKR).

METHODS

Analyses of large databases were conducted using various data sources: a systematic literature review; a direct data analysis from The Functional Outcomes Research for Comparative Effectiveness in Total Joint Replacement and Quality Improvement Registry (FORCE-TJR) and the Kaiser Permanente Implant Registry (KPIR); and claims data analyses from longitudinal discharge data in New York and California states. The literature review included U.S. patients (≥18 years) who received THR or TKR for primary end-stage osteoarthritis and prospectively collected data on patient-reported outcome measures (PROMs) from at least 100 subjects and/or 2-year implant survival for at least 250 implants. Random effects models were used for meta-analysis.

RESULTS

Data were available from a total of 951 100 patients. After screening of 7979 abstracts, 294 studies underwent full-text review and 31 studies contributed to the evidence synthesis (333 995 implants). Direct data analysis of FORCE-TJR contributed 9223 joint replacement patients to the construction of OPC for effectiveness; KPIR contributed 262 044 patients for the construction of OPC for safety. Claims database analysis contributed 345 838 patients to the construction of safety OPC. OPC for safety were constructed for cumulative incidences of 2-year all-cause and septic revision (THR/TKR 2.0%/1.6% and 0.6%/0.7%), and OPC for effectiveness were constructed based on four disease-specific and three general health-related quality of life PROMs (HOOS/KOOS 87.1/80.6; HSS/KSS function 94.4/90.6; SF-12/SF-36, PCS 46.5/41.9, EQ-5D 0.88/0.84).

CONCLUSION

This study is the first to construct a 2-year OPC for the safety and effectiveness of THR and TKR based on U.S. real-world data. Based on these OPC, potential benchmarks for (single-arm study) evaluation of new device innovations are suggested for a regulated and safe introduction to the (commercial) market.

[Translated article] Metal on metal total hip arthroplasty: Correlation between inclination of the acetabular and metal ion levels

Due to their low friction index, hip arthroplasties with metal-metal (M-M) friction torque have been an attractive option in young patients with high functional demand, currently they have suffered a decrease in their use due to the complications of some models and physiological reactions adverse reactions related to the elevation of metal ions in the blood. Our objective is to review the patients with M-M pair operated in our centre, correlating the ion level with the position of the acetabular component and with the size of the head.

MATERIAL AND METHODS

Retrospective review of 166 M-M hip prostheses operated between 2002 and 2011. Sixty five ruled out for different causes (death, loss of follow-up, no current ion control, no radiography or others), leaving a sample of 101 patients to be analysed. Follow-up time, cup inclination angle, blood ion level, Harris Hip Score (HHS), and complications were recorded.

RESULTS

One hundred and one patients (25 women and 76 men), 55 years of average age (between 26 and 70), of these 8 were surface prostheses and 93 total prostheses. The mean follow-up time was 10 years (between 5 and 17 years). The mean head diameter was 46.25 (between 38 and 56). The mean inclination of the butts was 45.7° (between 26° and 71°). The correlation force between the verticality of the cup and the increase in ions is moderate r=0.31 for Cr and slight r=0.25 for Co. The correlation force between head size and ion increase is weak and inverse r=-0.14 for Cr and r=0.1 for Co. Five patients (4.9%) required revision (2 [1%] due to increased ions with pseudotumor). The mean time to revision was 6.5 years in which the ions increased. The mean HHS was 94.01 (between 55.8 and 100). In the review of patients, we found 3 with a significant increase in ions who had not followed controls, all 3 had an HHS of 100. The angles of the acetabular components were 69°, 60° and 48° and the diameter of the head was 48.42 and 48mm, respectively.

DISCUSSION AND CONCLUSIONS

M-M prostheses have been a valid option in patients with high functional demand. A bi-annual analytical follow-up is recommended, since in our case we have detected 3 patients with HHS 100 who presented unacceptable elevation of cobalt >20μm/l (according to SECCA) of the ions and 4 with very abnormal elevation of cobalt ≥10μm/l (according to SECCA), all of them with cup orientation angles >50°. With our review we can conclude that there is a moderate correlation between the verticality of the acetabular component and the increase in blood ions and that the follow-up of this patient with angles >50° is essential.

Development of a Bariatric Surgery Core Data Set for an International Registry

PURPOSE

Bariatric and metabolic surgery is an effective treatment for severe and complex obesity; however, robust long-term data comparing operations is lacking. Clinical registries complement clinical trials in contributing to this evidence base. Agreement on standard data for bariatric registries is needed to facilitate comparisons. This study developed a Core Registry Set (CRS) - core data to include in bariatric surgery registries globally.

MATERIALS AND METHODS

Relevant items were identified from a bariatric surgery research core outcome set, a registry data dictionary project, systematic literature searches, and a patient advisory group. This comprehensive list informed a questionnaire for a two-round Delphi survey with international health professionals. Participants rated each item's importance and received anonymized feedback in round 2. Using pre-defined criteria, items were then categorized for voting at a consensus meeting to agree the CRS.

RESULTS

Items identified from all sources were grouped into 97 questionnaire items. Professionals (n = 272) from 56 countries participated in the round 1 survey of which 45% responded to round 2. Twenty-four professionals from 13 countries participated in the consensus meeting. Twelve items were voted into the CRS including demographic and bariatric procedure information, effectiveness, and safety outcomes.

CONCLUSION

This CRS is the first step towards unifying bariatric surgery registries internationally. We recommend the CRS is included as a minimum dataset in all bariatric registries worldwide. Adoption of the CRS will enable meaningful international comparisons of bariatric operations. Future work will agree definitions and measures for the CRS including incorporating quality-of-life measures defined in a parallel project.

National Joint Registry recorded untoward intraoperative events during primary total hip arthroplasty: an investigation into the data accuracy, causal mechanisms and attributability

INTRODUCTION

Untoward intraoperative events occurring during total hip arthroplasty are recorded by the National Joint Registry through Minimum Data Set (MDS) forms. This data may be used to assess the safety of implants. The aim of this study is to evaluate the accuracy of the untoward intraoperative events, assess the mechanism and ascertain whether these events were attributable to the implants inserted.

METHODS

A retrospective analysis was undertaken of primary total hip arthroplasties performed between 2005 and 2018 in which an untoward intraoperative event was recorded.

RESULTS

Of 12,802 primary hip replacements, 64 patients (0.5%) had untoward intraoperative events recorded on the MDS form. In 43 of 64 cases, the intraoperative untoward event recorded on the MDS form matched the operation notes. Among these 43 cases, in 30 (69%) patients the intraoperative event could be attributed to the implant recorded. In the remaining 13 (31%) cases, the events recorded could not be attributed to the implant. In six cases, the untoward events were attributed to implants used to manage the events rather than the implants which caused them. In seven cases, the untoward events were related to surgical technique rather than to the implant or instrumentation.

CONCLUSIONS

Our analysis highlights that all untoward intraoperative events recorded on the NJR form are not implant related or attributable to the implant inserted. Provision should be made on the MDS form to clarify whether a particular untoward intraoperative event was related to the implant inserted.

Layer-by-layer assembly of procyanidin and collagen promotes mesenchymal stem cell proliferation and osteogenic differentiation in vitro and in vivo

Collagen, commonly used in tissue engineering, is widespread in various tissues. During bone tissue regeneration, collagen can stimulate the cellular response and determine the fate of cells. In this work, we integrated collagen type II with procyanidin (PC) onto an implant coating by applying a layer-by-layer technique to demonstrate that collagen and PC can participate in the construction of new biomaterials and serve as multifunctional components. The effects of PC/collagen multilayers on the viability of cocultured bone marrow mesenchymal stem cells (BMSCs) were analyzed by cell counting kit-8 analysis and phalloidin staining. The reactive oxygen species level of BMSCs was revealed through immunofluorescent staining and flow cytometry. Osteogenesis-related genes were detected, and in vivo experiment was performed to reveal the effect of newly designed material on the osteogenic differentiation of BMSCs. Our data demonstrated that in BMSCs PC/collagen multilayers accelerated the proliferation and osteogenic differentiation through Wnt/β-catenin signaling pathway and enhanced bone generation around the implant in the bone defect model of rabbit femurs. In summary, combination of collagen and PC provided a new sight for the research and development of implant materials or coatings in the future.

Metal on metal total hip arthroplasty: Correlation between inclination of the acetabular and metal ion levels

Due to their low friction index, hip arthroplasties with metal-metal (M-M) friction torque have been an attractive option in young patients with high functional demand, currently they have suffered a decrease in their use due to the complications of some models and physiological reactions adverse reactions related to the elevation of metal ions in the blood. Our objective is to review the patients with M-M pair operated in our center, correlating the ion level with the position of the acetabular component and with the size of the head.

MATERIAL AND METHODS

Retrospective review of 166 M-M hip prostheses operated between 2002 and 2011. Sixty five ruled out for different causes (death, loss of follow-up, no current ion control, no radiography or others), leaving a sample of 101 patients to be analyzed. Follow-up time, cup inclination angle, blood ion level, Harris Hip Score (HHS), and complications were recorded.

RESULTS

One hundred and one patients (25 women and 76 men), 55years of average age (between 26 and 70), of these 8 were surface prostheses and 93 total prostheses. The mean follow-up time was 10years (between 5 and 17years). The mean head diameters was 46.25 (between 38 and 56). The mean inclination of the butts was 45.7° (between 26° and 71°). The correlation force between the verticality of the cup and the increase in ions is moderate r=0.31 for Cr and slight r=0.25 for Co. The correlation force between head size and ion increase is weak and inverse r=-0.14 for Cr and r=0.1 for Co. Five patients (4.9%) required revision (2 [1%] due to increased ions with pseudotumor). The mean time to revision was 6.5years in which the ions increased. The mean HHS was 94.01 (between 55.8 and 100). In the review of patients, we found 3 with a significant increase in ions who had not followed controls, all 3 had an HHS of 100. The angles of the acetabular components were 69°, 60° and 48° and the diameter of the head was 48.42 and 48mm, respectively.

DISCUSSION AND CONCLUSIONS

M-M prostheses have been a valid option in patients with high functional demand. A bi-annual analytical follow-up is recommended, since in our case we have detected 3patients with HHS100 who presented unacceptable elevation of cobalt >20μm/L (according to SECCA) of the ions and 4 with very abnormal elevation of cobalt ≥10μm/L (according to SECCA), all of them with cup orientation angles >50°. With our review we can conclude that there is a moderate correlation between the verticality of the acetabular component and the increase in blood ions and that the follow-up of this patient with angles >50° is essential.

Outcome of revised metal-on-metal hip arthroplasties: a Dutch arthroplasty register study

BACKGROUND

Preliminary results of metal-on-metal (MoM) hip arthroplasty were satisfactory, but since 2004 data showed high failure rates. National joint replacement registries are multi-centre databases comprised of thousands of subjects and implants which allow for identifying variables predictive of implant failure. The aim of the current study was to estimate re-revision rates after revision of a primary MoM hip arthroplasty in the Dutch Arthroplasty Register (LROI) and to assess potential predictor variables of re-revision of these MoM hip arthroplasties.

METHODS

Eligible procedures were those with a revision for any reason except infection, after an initial primary surgery with a hip resurfacing (HRA) or large-head MoM (LH-MoM) total hip arthroplasty (THA). The probability of re-revision for both types of MoM hip arthroplasty over time was estimated using the cumulative incidence function taking mortality as a competing risk into account. A proportional sub-distribution hazards regression model was used to assess potential predictor variables of re-revision of these MoM hip arthroplasties.

RESULTS

A total of 3476 records of revised implants were included, of which 873 (25.2%) were MoM implants. Over the course of follow-up, 101 (11.5%) MoM implants were re-revised. During follow-up 36 (4.3%) patients who received a MoM-implant at primary arthroplasty and a revision afterwards had died. The regression model showed that for primary MoM implants a MoM articulation after revision (HR 2.48; 95% CI 1.53-4.03, p < 0.001), femoral-only revisions (HR 3.20; 95% CI 2.06-4.99, p < 0.001) and periprosthetic fractures (HR 1.98; 95% CI 1.03-3.82, p = 0.042) as reason for the first revision were statistically significant risk factors for re-revision.

CONCLUSION

Both types of large-head MoM hip arthroplasties have shown high revision and re-revision rates; risk factors were identified. The outcome of this study can be helpful in managing expectations of patients and orthopaedic surgeons.

Analysis of New Orthopaedic Technologies in Large Database Research

Improvements in orthopaedic surgery go hand in hand with technological advances. The present article outlines the historical and current uses of large databases and registries for the evaluation of new orthopaedic technologies, providing insights for future utilization, with robotic-assisted surgery as the example technology.

Analytical and toxicological aspects of nanomaterials in different product groups: Challenges and opportunities

The widespread integration of engineered nanomaterials into consumer and industrial products creates new challenges and requires innovative approaches in terms of design, testing, reliability, and safety of nanotechnology. The aim of this review article is to give an overview of different product groups in which nanomaterials are present and outline their safety aspects for consumers. Here, release of nanomaterials and related analytical challenges and solutions as well as toxicological considerations, such as dose-metrics, are discussed. Additionally, the utilization of engineered nanomaterials as pharmaceuticals or nutraceuticals to deliver and release cargo molecules is covered. Furthermore, critical pathways for human exposure to nanomaterials, namely inhalation and ingestion, are discussed in the context of risk assessment. Analysis of NMs in food, innovative medicine or food contact materials is discussed. Specific focus is on the presence and release of nanomaterials, including whether nanomaterials can migrate from polymer nanocomposites used in food contact materials. With regard to the toxicology and toxicokinetics of nanomaterials, aspects of dose metrics of inhalation toxicity as well as ingestion toxicology and comparison between in vitro and in vivo conclusions are considered. The definition of dose descriptors to be applied in toxicological testing is emphasized. In relation to potential exposure from different products, opportunities arising from the use of advanced analytical techniques in more unique scenarios such as release of nanomaterials from medical devices such as orthopedic implants are addressed. Alongside higher product performance and complexity, further challenges regarding material characterization and safety, as well as acceptance by the general public are expected.

How long do revised and multiply revised hip replacements last? A retrospective observational study of the National Joint Registry

Background

Hip replacements are common and effective operations but patients that undergo this intervention are at risk of the replacements failing, requiring costly and often complex revision surgery with poorer outcomes than primary surgery. There is paucity of reliable data examining the treatment pathway for hip replacements over the life of the patient in terms of risk of revision and re-revisions. We aim to provide detailed information on the longevity of hip revision surgery.

Methods

We did a retrospective observational registry-based study of the National Joint Registry, using data on hip replacements from all participating hospitals in England and Wales, UK. We included data on all first revisions, with an identifiable primary procedure, with osteoarthritis as the sole indication for the original primary procedure. Kaplan-Meier estimates were used to determine the cumulative probability of revision and subsequent re-revision after primary hip replacement. Analyses were stratified by age and gender, and the influence of time from first to second revision on the risk of further revision was explored.

Findings

Between April 1, 2003, and Dec 31, 2019, there were 29 010 revision hip replacements with a linked primary episode. Revision rates of revision hip replacements were higher in patients younger than 55 years than in older age groups. After revision of primary total hip replacement, 21·3% (95% CI 18·6-24·4) of first revisions were revised again within 15 years, 22·3% (20·3-24·4) of second revisions were revised again within 7 years, and 22·3% (18·3-27·0) of third revisions were revised again within 3 years. After revision of hip resurfacing, 23·7% (95% CI 19·6-28·5) of these revisions were revised again within 15 years, 21·0% (17·0-25·8) of second revisions were revised again within 7 years, and 19·3% (11·9-30·4) of third revisions were revised again within 3 years. A shorter time between revision episodes was associated with earlier subsequent revision.

Interpretation

Younger patients are at an increased risk of multiple revisions. Patients who undergo a revision have a steadily increasing risk of further revision the more procedures they undergo, and each subsequent revision lasts for approximately half the time of the previous one. Although hip replacements are effective for improving pain and function and usually last a remarkably long time, if they are revised, successive revisions are progressively and markedly less successful.

Funding

NIHR Biomedical Research Centre at the University Hospitals Bristol and Weston NHS Foundation Trust and the University of Bristol, Healthcare Quality Improvement Partnership; and the National Joint Registry.

How much does a Medical and Healthcare Products Regulatory Agency medical device alert for metal-on-metal hip arthroplasty patients really cost?

BACKGROUND

Many worldwide regulatory authorities recommend regular surveillance of metal-on-metal hip arthroplasty patients given high failure rates. However, concerns have been raised about whether such regular surveillance, which includes asymptomatic patients, is evidence-based and cost-effective. We determined: (1) the cost of implementing the 2015 MHRA surveillance in "at-risk" Birmingham Hip Resurfacing (BHR) patients; and (2) how many asymptomatic hips with adverse reactions to metal debris (ARMD) would have been missed without patient recall.

METHODS

All BHR patients eligible for the 2015 MHRA recall (all females, and males with head sizes ⩽46 mm, regardless of symptoms) at one centre were invited for review (hips = 707; patients = 593). All patients were investigated (Oxford Hip Score, radiographs, blood metal ions, and targeted cross-sectional imaging) and managed accordingly. Surveillance costs were calculated using finance department data.

RESULTS

The surveillance cost £105,921.79 (range £147.76-£257.50/patient). Radiographs (£39,598) and nurse practitioner time/assistance (£23,618) accounted for 60% of overall costs. 31 hips had ARMD on imaging (12 revised; 19 under surveillance). All revisions were symptomatic. 7 hips with ARMD under surveillance were asymptomatic and remain under regular review. The number needed to treat to avoid missing one asymptomatic ARMD case was 101 patients, representing a cost of £18,041 to avoid one asymptomatic case.

CONCLUSIONS

Implementing MHRA surveillance for "at-risk" BHR patients was extremely costly. The risk of asymptomatic ARMD was low with the BHR (1%), suggesting recommended follow-up in asymptomatic patients is not cost efficient. This raises concerns about the increasingly intensive surveillance recommended in the 2017 MHRA guidance for metal-on-metal hip patients.

Current status and future potential of wear-resistant coatings and articulating surfaces for hip and knee implants

Hip and knee joint replacements are common and largely successful procedures that utilise implants to restore mobility and relieve pain for patients suffering from e.g. osteoarthritis. However, metallic ions and particles released from both the bearing surfaces and non-articulating interfaces, as in modular components, can cause hypersensitivity and local tissue necrosis, while particles originating from a polymer component have been associated with aseptic loosening and osteolysis. Implant coatings have the potential to improve properties compared to both bulk metal and ceramic alternatives. Ceramic coatings have the potential to increase scratch resistance, enhance wettability and reduce wear of the articulating surfaces compared to the metallic substrate, whilst maintaining overall toughness of the implant ensuring a lower risk of catastrophic failure of the device compared to use of a bulk ceramic. Coatings can also act as barriers to inhibit ion release from the underlying material caused by corrosion. This review aims to provide a comprehensive overview of wear-resistant coatings for joint replacements - both those that are in current clinical use as well as those under investigation for future use. While the majority of coatings belong predominantly in the latter group, a few coated implants have been successfully marketed and are available for clinical use in specific applications. Commercially available coatings for implants include titanium nitride (TiN), titanium niobium nitride (TiNbN), oxidized zirconium (OxZr) and zirconium nitride (ZrN) based coatings, whereas current research is focused not only on these, but also on diamond-like-carbon (DLC), silicon nitride (SiN), chromium nitride (CrN) and tantalum-based coatings (TaN and TaO). The coating materials referred to above that are still at the research stage have been shown to be non-cytotoxic and to reduce wear in a laboratory setting. However, the adhesion of implant coatings remains a main area of concern, as poor adhesion can cause delamination and excessive wear. In clinical applications zirconium implant surfaces treated to achieve a zirconium oxide film and TiNbN coated implants have however been proven comparable to traditional cobalt chromium implants with regards to revision numbers. In addition, the chromium ion levels measured in the plasma of patients were lower and allergy symptoms were relieved. Therefore, coated implants could be considered an alternative to uncoated metal implants, in particular for patients with metal hypersensitivity. There have also been unsuccessful introductions to the market, such as DLC coated implants, and therefore this review also attempts to summarize the lessons learnt.

Tailoring the dissolution rate and in vitro cell response of silicon nitride coatings through combinatorial sputtering with chromium and niobium

Ceramic coatings have been widely investigated as a means to reduce wear and metallic ion release from joint implants. Silicon nitride-based coatings have been a topic of interest specifically due to their solubility in aqueous solutions. This could imply a reduced adverse immune response since the generated debris would dissolve. However, there are concerns regarding the dissolution rate and adhesion of these silicon nitride-based coatings. This study attempts to address the concern of dissolution rate as well as coating adhesion of silicon nitride coatings. We hypothesized that alloying with chromium and niobium would affect the adhesion, dissolution rate, and the resulting ion release and cell response to the coatings. A combinatorial approach was used to deposit sputtered coatings with compositional gradients both with and without a CrN interlayer. Compositional gradients were achieved for all the investigated elements: Si (38.6-46.9 at%), Nb (2.2-4.6 at%) and Cr (1.9-6.0 at%). However, while the presence of an interlayer reduced the delamination during adhesion testing, the differences in composition in the top coating did not affect the adhesion. Nor did the top coating's composition affect the surface roughness or the coatings' inherent mechanical properties (elastic modulus and hardness). All coating compositions were associated with a low Co release from the underlying metal and points with a higher Cr content (4.3-6.0 at%) gave an overall lower release of Si, Cr and Nb ions, possibly due to the formation of a stable oxide, which reduced the dissolution rate of the coating. Optimum chromium contents were furthermore found to give an enhanced in vitro fibroblast cell viability. In conclusion, the results indicate a possibility to tailor the ion release rate, which lends promise to further investigations such as tribocorrosive tests towards a future biomedical application.

Hip resurfacing arthroplasty in young patients: international high-volume centres' report on the outcome of 11,382 metal-on-metal hip resurfacing arthroplasties in patients ⩽50 years at surgery

BACKGROUND

Total hip arthroplasty (THA) in patients younger than 50 years poses significant challenges including postoperative limitations of activity and higher failure rates. Sub-par outcomes of hip resurfacing arthroplasty (HRA) in registries remain controversial due to multiple confounders. Favourable HRA results in some studies are often regarded as irreproducible. The aim of this study is to analyse HRA outcomes in a large international cohort.

PATIENTS AND METHODS

We compiled a database of 11,382 HRA patients ⩽50 years from an international group of 27 experienced HRA centres from 13 countries. 18 different metal-on-metal (MoM) HRA designs were included with a mean follow-up of 7.6 years. Outcomes were implant survivorship, revision rates, causes for revision, clinical scores and metal ion levels. Outcomes were compared between genders, sizes, implant types and pre-operative diagnoses.

RESULTS

Overall cumulative Kaplan-Meier survivorship was 88.9% at 22 years (95% CI: 88.3-89.5%). 2 HRA designs (DePuy Articular Surface Replacement (ASR), and Corin Cormet Hip Resurfacing System (CORMET)) led to inferior results while all others yielded similar survivorships. Excluding ASR and CORMET, implant survivorship in 11,063 cases was 95% at 10 years and 90% at 22 years. In men, implant survivorship was excellent: 99% at 10 years and 92.5% at 21 years. In females, implant survivorship was 90% at 10 years and 81.3% at 22 years. The overall revision rate was 3.6% with most common reasons for revision being implant loosening and adverse local tissue reactions. The best survivorship was found in patients with osteoarthritis (95% CI, 92.1-93.3% at 22 years), the poorest was among dysplastic hips (78.3%; 95% CI, 76.5-80.1% at 20 years, p < 0.001).

CONCLUSIONS

Comparable revision rates demonstrated here may mitigate some concerns for safety and longevity of MoM HRA implants. Higher demands for activity and functionality in younger patients make HRA a potential alternative to THA.

The risk of all-cause mortality, heart outcomes, cancer, and neurodegenerative disorders with cobalt-chrome-containing total hip arthroplasty implants : an analysis of the National Joint Registry

AIMS

A recent report from France suggested an association between the use of cobalt-chrome (CoCr) femoral heads in total hip arthroplasties (THAs) and an increased risk of dilated cardiomyopathy and heart failure. CoCr is a commonly used material in orthopaedic implants. If the reported association is causal, the consequences would be significant given the millions of joint arthroplasties and other orthopaedic procedures in which CoCr is used annually. We examined whether CoCr-containing THAs were associated with an increased risk of all-cause mortality, heart outcomes, cancer, and neurodegenerative disorders in a large national database.

METHODS

Data from the National Joint Registry was linked to NHS English hospital inpatient episodes for 374,359 primary THAs with up to 14.5 years' follow-up. We excluded any patients with bilateral THAs, knee arthroplasties, indications other than osteoarthritis, aged under 55 years, and diagnosis of one or more outcome of interest before THA. Implants were grouped as either containing CoCr or not containing CoCr. The association between implant construct and the risk of all-cause mortality and incident heart failure, cancer, and neurodegenerative disorders was examined.

RESULTS

There were 158,677 individuals (42.4%) with an implant containing CoCr. There were 47,963 deaths, 27,332 heart outcomes, 35,720 cancers, and 22,025 neurodegenerative disorders. There was no evidence of an association between patients with CoCr implants and higher rates of any of the outcomes.

CONCLUSION

CoCr-containing THAs did not have an increased risk of all-cause mortality, or clinically meaningful heart outcomes, cancer, or neurodegenerative disorders into the second decade post-implantation. Our findings will help reassure clinicians and the increasing number of patients receiving primary THA worldwide that the use of CoCr-containing implants is not associated with significant adverse systemic effects. Cite this article: Bone Joint J 2022;104-B(3):359-367.

The risk of all-cause mortality, heart outcomes, cancer, and neurodegenerative disorders with cobalt-chrome-containing total hip arthroplasty implants : an analysis of the National Joint Registry

AIMS

A recent report from France suggested an association between the use of cobalt-chrome femoral heads in total hip arthroplasties (THAs) and an increased risk of dilated cardiomyopathy and heart failure. Cobalt-chrome is a commonly used material in orthopaedic implants. If the reported association is causal, the consequences would be significant given the millions of joint replacements and other orthopaedic procedures in which cobalt-chrome is used annually. We examined whether cobalt-chrome-containing THAs were associated with an increased risk of all-cause mortality, heart outcomes, cancer, and neurodegenerative disorders in a large national database.

METHODS

Data from the National Joint Registry was linked to NHS English hospital inpatient episodes for 374,359 primary THAs with up to 14.5 years follow-up. We excluded any patients with bilateral THAs, knee replacements, indications other than osteoarthritis, aged under 55 years, and diagnosis of one or more outcome of interest before THA. Implants were grouped as either containing cobalt-chrome or not containing cobalt-chrome. The association between implant construct and the risk of all-cause mortality and incident heart failure, cancer, and neurodegenerative disorders was examined.

RESULTS

There were 158,677 individuals (42.4%) with an implant containing cobalt-chrome. There were 47,963 deaths, 27,332 heart outcomes, 35,720 cancers, and 22,025 neurodegenerative disorders. There was no evidence of an association that patients with cobalt-chrome implants had higher rates of any of the outcomes.

CONCLUSION

Cobalt-chrome-containing THAs did not have an increased risk of all-cause mortality, or clinically meaningful heart outcomes, cancer or neurodegenerative disorders into the second decade post-implantation. Our findings will help reassure clinicians and the increasing number of patients receiving primary THA worldwide that the use of cobalt-chrome containing implants is not associated with significant adverse systemic effects.

Ten-year results of a prospective cohort of large-head metal-on-metal total hip arthroplasty

Aims

Large-diameter metal-on-metal (MoM) total hip arthroplasty (THA) has demonstrated unexpected high failure rates and pseudotumour formation. The purpose of this prospective cohort study is to report ten-year results in order to establish revision rate, prevalence of pseudotumour formation, and relation with whole blood cobalt levels.

Methods

All patients were recalled according to the guidelines of the Dutch Orthopaedic Association. They underwent clinical and radiographical assessments (radiograph and CT scan) of the hip prosthesis and whole blood cobalt ion measurements. Overall, 94 patients (95 hips) fulfilled our requirements for a minimum ten-year follow-up.

Results

Mean follow-up was 10.9 years (10 to 12), with a cumulative survival rate of 82.4%. Reason for revision was predominantly pseudotumour formation (68%), apart from loosening, pain, infection, and osteolysis. The prevalence of pseudotumour formation around the prostheses was 41%, while our previous report of this cohort (with a mean follow-up of 3.6 years) revealed a 39% prevalence. The ten-year revision-free survival with pseudotumour was 66.7% and without pseudotumour 92.4% (p < 0.05). There was poor discriminatory ability for cobalt for pseudotumour formation.

Conclusion

This prospective study reports a minimum ten-year follow-up of large-head MoM THA. Revision rates are high, with the main reason being the sequelae of pseudotumour formation, which were rarely observed after five years of implantation. Blood ion measurements show limited discriminatory capacity in diagnosing pseudotumour formation. Our results evidence that an early comprehensive follow-up strategy is essential for MoM THA to promptly identify and manage early complications and revise on time. After ten years follow-up, we do not recommend continuing routine CT scanning or whole cobalt blood measurements, but instead enrolling these patients in routine follow-up protocols for THA.

Cite this article: Bone Jt Open 2022;3(1):61–67.

Competing Risks Methods Are Recommended for Estimating the Cumulative Incidence of Revision Arthroplasty for Health Care Planning Purposes

Cumulative incidence of revision provides a measure of the failure rate of joint replacements and can be used to project demand for revisions. The most commonly applied survival analysis method (Kaplan-Meier [KM]) does not account for competing risks (eg, death). The authors compared the cumulative incidence function (CIF), a competing risks method, with the KM method through application to population-based cohorts. They measured time to revision, death, or censoring for unilateral total hip arthroplasty (THA; n=12,496) and total knee arthroplasty (TKA; n=19,172) cohorts in administrative databases in Alberta and TKAs (n=80,177) in the Swedish Knee Arthroplasty Register. The authors compared relative differences between the KM and CIF. They fitted Cox, Fine and Gray, and Royston and Parmar regression models and compared coefficients, standard errors, and P values. On sensitivity analysis, the authors included staged bilateral operations. Kaplan-Meier estimates exceeded the CIF at each time point. The magnitude of overestimation increased with follow-up time and was greatest for the Swedish cohort. At 5 years, relative differences between KM and CIF estimates for the Alberta THA and TKA and Swedish TKA cohorts were 1.8%, 2.3%, and 3.8%, respectively. These differences increased to 3.1%, 5.8%, and 8.2%, respectively, at 9 years, reaching 39.1% at 20 years (Swedish cohort). On sensitivity analysis (including staged bilateral operations), the Fine and Gray subdistribution hazard ratio differed from the Cox and Royston and Parmar hazard ratios. When the frequency of competing risks is high, competing risks methods are recommended to obtain accurate cumulative incidence estimates for informing health care planning and decision making. [Orthopedics. 2021;44(4):e549-e555.].

Hueter Anterior Approach for Metal-on-Metal Hip Resurfacing Arthroplasty: 555 Cases at a Minimum Five-Year Follow-Up

BACKGROUND

Purpose of this study was to determine implant survivorship and resultant outcomes, including modes of failure, for metal-on-metal hip resurfacing through the Hueter anterior approach (HAA).

METHODS

Retrospective review of cases from 2006 to 2015, resulted in 555 metal-on-metal hip resurfacing via HAA, mean age 49.4 ± 6.9 years and mean BMI 28.1 ± 5.3. Kaplan-Meier curves were used to assess implant survivorship. Evaluation of technique was based on radiographic assessment of component position at 6 weeks. Patient-reported outcome measures were assessed using 12-Item Short Form Survey 12, University of California Los Angeles activity, Western Ontario and McMaster Universities Osteoarthritis Index, and hip disability osteoarthritis outcome scores.

RESULTS

At a mean follow-up of 9.18 years, survivorship was 95.0% at 5 years (95% CI: 93.2-96.8 years) and 92.5% at 10 years (95% CI: 90.0-95.0 years); men at 96.1% (95% CI: 94.3-97.9) and 93.8% (95% CI: 91.1-96.5), and women at 88.8% (95% CI: 81.9-95.7) and 85.6% (95% CI: 77.6-93.6), 5 and 10 years, respectively (P = .033). There were 37 revisions to total hips (7%) at a mean time of 3.3 years (SD 2.7). Indications for revision were aseptic loosening of acetabular (n = 12) and femoral component (n = 7) and pseudotumor (n = 6). Radiographic parameters were respectable and consistent, median acetabular inclination angle 41.2° and femoral stem shaft angle 137.7°. Patient-reported outcome measure scores significantly improved and remained stable at 2 and 5 years postoperatively.

CONCLUSION

Although choice of surgical approach should always be based on surgeon's technical expertise, this study has shown that HAA is safe and effective for hip resurfacing. Mindful attention to long-term metal ion exposure must still be considered.

Benchmarking total hip replacement constructs using noninferiority analysis: the New Zealand joint registry study

BACKGROUND

The aim of this study was to compare the relative performance of total hip replacement constructs and discern if there is substantial variability in performance in currently commonly used prostheses in the New Zealand Joint Registry (NZJR) using a noninferiority analysis.

METHODS

All patients who underwent a primary total hip replacement (THR) registered in the NZJR between 1st January 1999 to June 2020 were identified. Using a noninferiority analysis, the performance of hip prostheses were compared with the best performing contemporary construct. Construct failure was estimated using the 1-Kaplan Meier survival function method to estimate net failure. The difference in failure between the contemporary benchmark and other constructs was examined.

RESULTS

In total 135,432 THR were recorded comprising 1035 different THR constructs. Notably 328 constructs were used just once. Forty-eight constructs (62,251 THR) had > 500 procedures at risk at 3 years post-primary of which 28 were inferior by at least 20% relative risk of which, 10 were inferior by at least 100% relative risk. Sixteen constructs were identified with > 500 procedures at risk at 10 years with 9 inferior by at least 20%, of which one was inferior by > 100% relative risk. There were fewer constructs noninferior to the best practice benchmark when we performed analysis by gender. In females at 10 years, from 5 constructs with > 500 constructs at risk, 2 were inferior at the 20% margin. In males at 10 years, there were only 2 eligible constructs of which one was inferior at the 20% margin.

CONCLUSIONS

We discerned that there is substantial variability in construct performance and at most time points, just over half of constructs are inferior to the best performing construct by at least 20%. These results can facilitate informed decision-making when considering THR surgery.

What is the Level of Evidence Substantiating Commercial Payers' Coverage Policies for Total Joint Arthroplasty?

BACKGROUND

The prevalence of total joint arthroplasty (TJA) in the United States has drawn the attention of health care stakeholders. The payers have also used a variety of strategies to regulate the medical necessity of these procedures. The purpose of this study was to examine the level of evidence of the coverage policies being used by commercial payers in the United States.

METHODS

The references of the coverage policies of four commercial insurance companies were reviewed for type of document, level of evidence, applicability to a TJA population, and success of nonoperative treatment in patients with severe degenerative joint disease.

RESULTS

282 documents were reviewed. 45.8% were primary journal articles, 14.2% were level I or II, 41.2% were applicable to patients who were candidates for TJA, and 9.9% discussed the success of nonoperative treatment in patients who would be candidates for TJA.

CONCLUSION

Most of the references cited by commercial payers are of a lower level of scientific evidence and not applicable to patients considered to be candidates for TJA. This is relatively uniform across the reviewed payers. The dearth of high-quality literature cited by commercial payers reflects the lack of evidence and difficulty in conducting high level studies on the outcomes of nonoperative versus operative treatment for patients with severe, symptomatic osteoarthritis. Patients, surgeons, and payers would all benefit from such studies and we encourage professional societies to strive toward that end through multicenter collaboration.

Distinct Concentration-Dependent Molecular Pathways Regulate Bone Cell Responses to Cobalt and Chromium Exposure from Joint Replacement Prostheses

Systemic cobalt (Co) and chromium (Cr) concentrations may be elevated in patients with metal joint replacement prostheses. Several studies have highlighted the detrimental effects of this exposure on bone cells in vitro, but the underlying mechanisms remain unclear. In this study, we use whole-genome microarrays to comprehensively assess gene expression in primary human osteoblasts, osteoclast precursors and mature resorbing osteoclasts following exposure to clinically relevant circulating versus local periprosthetic tissue concentrations of Co²⁺ and Cr³⁺ ions and CoCr nanoparticles. We also describe the gene expression response in osteoblasts on routinely used prosthesis surfaces in the presence of metal exposure. Our results suggest that systemic levels of metal exposure have no effect on osteoblasts, and primarily inhibit osteoclast differentiation and function via altering the focal adhesion and extracellular matrix interaction pathways. In contrast, periprosthetic levels of metal exposure inhibit both osteoblast and osteoclast activity by altering HIF-1α signaling and endocytic/cytoskeletal genes respectively, as well as increasing inflammatory signaling with mechanistic implications for adverse reactions to metal debris. Furthermore, we identify gene clusters and KEGG pathways for which the expression correlates with increasing Co²⁺:Cr³⁺ concentrations, and has the potential to serve as early markers of metal toxicity. Finally, our study provides a molecular basis for the improved clinical outcomes for hydroxyapatite-coated prostheses that elicit a pro-survival osteogenic gene signature compared to grit-blasted and plasma-sprayed titanium-coated surfaces in the presence of metal exposure.

Is there a relation between clinical scores and serum ion levels after MoM-THA? One year results in 383 implants

Background and aim of the work:

Adverse reaction to metal debris is the major cause of the high revision rates of metal on metal hip implants with femoral head size ≥ 36mm. Health authorities recommend regular surveillance even for asymptomatic individuals. The main investigations used are Co+ and Cr+ serum levels, x-rays and, eventually, ultrasound and MARS-MRI. Clinic is also assessed. The aim of this study is to identify if there is a relation between ion levels and the clinical scores in order to evaluate the outcome and plan the correct management after this type of implant.

Methods:

383 subjects were included and divided in 3 groups (serum ion levels >, < and >60 µg/L). Co+, Cr+, HHS and OHS results of 1 year (2017) were analysed in order to show a correlation between ion levels and clinical scores.

Results:

Clinical scores were similar in group 1 and 2. Differences were observed comparing the group 1 and 2 with group 3 for both variables.

Discussion and Conclusions:

Surveillance algorithms have been introduced by health authorities. Nevertheless, the indication to revision surgery is not simple especially in those cases in which a discrepancy between clinic and investigations is present. In this study clinical scores seem to be less important than ion levels in the evaluation of outcomes and in order to plan the correct management in the majority of cases. Larger studies are needed to highlight the real importance of clinical scores in the decision making after these type of implants.

Best Practices: Best Imaging Modality for Surveillance of Metal-on-Metal Hip Arthroplasty

OBJECTIVE. Metal-on-metal hip arthroplasty has been shown to result in soft-tissue complications in some patients, making revision surgery necessary. Imaging is critical in the detection and surveillance of soft-tissue complications, which are collectively termed adverse reaction to metal debris (ARMD) and adverse local tissue reaction. Studies have investigated the use of ultrasound, MRI, and CT for detecting ARMD, and each modality has advantages and disadvantages. This article provides evidence-based recommendations for imaging surveillance of ARMD. CONCLUSION. Compared with ultrasound, MRI has been found to be a better imaging modality for surveillance of ARMD. In addition, MRI is not operator dependent, allows visualization of soft-tissue details, and allows more consistent measurement of fluid collections on follow-up examinations. Limitations of ultrasound include operator skill, the inability to visualize osseous structures, and the challenge of visualizing posterior soft tissues for synovitis and fluid collections in larger patients. Finally, CT is only useful for focused evaluation of osteolysis or periprosthetic fracture.

Stem cell therapy for osteonecrosis of femoral head: Opportunities and challenges

Osteonecrosis of the femoral head (ONFH) is a progressive disease with a complex etiology and unclear pathogenesis, resulting in severe hip pain and dysfunction mainly observed in young patients. Although total hip arthroplasty (THA) is the most effective treatment for patients with ONFH in the terminal stage, the results of THA in young patients or active populations are often not favorable, with some complications related to the prosthesis. With the development of biotechnology, an increasing number of studies pay attention to use of stem cells for the treatment of ONFH. Stem cells are characterized by the ability to self-renew and differentiate into multiple cell types, including differentiation into osteoblasts and endothelial cells to mediate bone repair and angiogenesis. Furthermore, stem cells can offer growth factors to promote blood supply in the necrotic regions by paracrine effects. Therefore, stem cell therapy has become one of the hip-preserving alternatives for ONFH. This review summarized the current trends in stem cell therapy for ONFH, from clinical applications to related basic research, and showed that an increasing number of studies have confirmed the effectiveness of stem cell therapy in ONFH. However, many unsolved problems and challenges in practical applications of stem cell therapy still exist, such as patient selection, standardized procedures, safety assessment, and the fate of transplanted cells in the body. Additional studies are required to find ideal cell sources, appropriate transplantation methods, and the optimal number of cells for transplantation.

•

Diversities in repair processes present a challenge in the targeted treatment of ONFH.

•

Osteogenesis and angiogenesis are the primary mechanisms of MSCs treatment in ONFH.

•

Systematic safety assessment and cell tracing are necessary for stem cell therapy.

•

Optimal numbers and methods of cell transplantation need to be further confirmed.

False profile view is independently associated with serum metal levels in patients with metal-on-metal hip arthroplasty

PURPOSE

Elevated levels of serum metal ions can be found in some patients with metal-on-metal (MoM) hip replacements. This study seeks to identify whether there is a significant association between the contact patch to rim distance (CPRD) and the anterior center edge angle (ACEA), respectively, and serum cobalt (Co) and chromium (Cr) levels in patients treated with unilateral MoM hip replacements by using standing anteroposterior and false profile view radiographs.

METHODS

This is a retrospective analysis on 53 patients with either unilateral ReCap or M2a-Magnum MoM hip replacements operated in 2006 or 2007. Univariate linear regression and multivariable linear regression (MLR) analyses were performed using the CPRD and ACEA along with risk factors for elevated serum levels of Co and Cr previously suggested in the literature as explanatory variables. Serum Co and Cr were measured using inductively coupled plasma mass spectrometry.

RESULTS

The MLR model showed that the same three variables (gender, CPRD and ACEA) were significantly associated with serum levels of both Co and Cr explaining approximately half of the variation. A univariate analysis showed a polynomial association between both anteversion angle and the ACEA with serum levels of Co and Cr. The vertex of the polynomial function was located at approximately 20° and 40°, respectively.

CONCLUSION

Gender, CPRD and ACEA are independently associated with serum levels of Co and Cr. Both ACEA and anteversion angles have optimae associated with low serum metal levels which may be useful for post-surgery evaluation of cup positioning.

Favourable clinical outcomes following cemented arthroplasty after metal-on-metal total hip replacement: a retrospective study with a mean follow-up of 10 years

BACKGROUND

Given the unexpected high rate of failure following metal-on-metal total hip replacement (MoM-THR), it is expected that more MoM-THR patients will experience revision. The long-term outcomes regarding the primary MoM-THR revised to cemented THR (CTHR) remain controversial. The purpose of this retrospective review was to evaluate the long-term outcomes of patients who underwent conversion from MoM-THR to CTHR.

METHODS

A total of 220 patients (220 hips) who underwent a conversion of primary MoM-THR to CTHR from March 2006 to October 2016 were retrospectively reviewed. The primary outcomes were the functional outcomes assessed using the Harris hip scores (HHS) and major radiographic outcomes. Follow-ups occurred at 3 months, 6 months, 1 year, 2 years, and then every two years after revision.

RESULTS

Mean follow-up was 10.1 years (5-13 years). Distinct improvements were detected in the mean HHS between the preoperative and last follow-up analysis (62.35[±8.49] vs. 84.70[±14.68], respectively, p < 0.001). The key orthopaedic complication rate was 18.2% (27/148). Seven (4.7%) cases experienced a CTHR failure at a mean of 3.4 (±1.2) years after revision MoM-THR, mostly attributed to recurrent dislocation.

CONCLUSION

CTHR might yield an acceptable functional score and a low rate of the key orthopaedic complications.

Is the Survivorship of Birmingham Hip Resurfacing Better Than Selected Conventional Hip Arthroplasties in Men Younger Than 65 Years of Age? A Study from the Australian Orthopaedic Association National Joint Replacement Registry

BACKGROUND

The Birmingham Hip Resurfacing (BHR) prosthesis is the most commonly used metal-on-metal hip resurfacing arthroplasty device. The current manufacturer-recommended target demographic for the BHR is male patients, younger than 65 years requiring a femoral head size of ≥ 50 mm. Female patients, older patients, and individuals with smaller femoral-head diameter (≤ 50 mm) are known to have higher revision rates. Prior studies suggest that the survivorship of the BHR when used in the target demographic is comparable with that of primary conventional THA, but comparing survivorship of the most durable hip resurfacing arthroplasty device to the survivorship of all conventional THA prostheses is not ideal because the THA group comprises a large number of different types of prostheses that have considerable variation in prosthesis survival. A more informative comparison would be with the THA implants with the best survivorship, as this might help address the question of whether survivorship in the BHR target population can be improved by using a well-performing conventional THA.

QUESTIONS/PURPOSES

We compared the difference in cumulative percent revision, reasons for revision and types of revision for procedures reported to the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) using the BHR prosthesis (femoral-head size > 50 mm) and three conventional THA prostheses identified as having the lowest 10-year cumulative percent revision in the currently recommended BHR target population to ask: (1) Does the BHR have a lower cumulative revision rate than the group of three conventional THA prostheses? (2) Is there a difference in the revision diagnosis between the BHR and the three best conventional THA prostheses? (3) What is the difference in the components used for a revision of a BHR compared with the three best conventional THA prostheses?

METHODS

Data reported to the AOANJRR between September 1, 1999 and December 31, 2018 was used for this analysis. This study period includes almost the entire use of the BHR in Australia. The AOANJRR is a large national joint registry with almost 100% completeness, high accuracy, rigorous validation, and little to no loss to follow-up. The study population included males younger than 65 years that had received one hip replacement procedure for osteoarthritis. All patients with bilateral procedures, no matter the time interval between hips, were excluded. Only BHR prostheses with a femoral-head size ≥ 50 mm and conventional THA prostheses with femoral head sizes ≥ 32 mm and either ceramic-on-ceramic or metal, ceramic, ceramicized metal-on-crosslinked polyethylene (XLPE) bearings were included. These femoral head sizes and bearings were selected because they reflect modern conventional THA practice. There is no difference in the revision rate of these bearings in the AOANJRR. There were 4790 BHR procedures and 2696 conventional THA procedures in the study group. The mean (± SD) age for BHR procedures was 52 ± 7.8 years and 56 ± 7.1 years for conventional THA procedures. All comparative analyses were adjusted for age. Other demographics data including American Society Anesthesiologists (ASA) score and BMI were only included in AOANJRR data collection since 2012 and 2015, respectively, and have not been included in this analysis because of the low use of BHR in Australia since that time. The maximum follow-up was 18.7 years for both groups and mean follow-up of 11.9 years for the BHR and 9.3 years for the conventional THA group. Revision rates were determined using Kaplan-Meier estimates of survivorship to describe the time to the first revision, with censoring at the time of death or closure of the database at the time of analysis. A revision was defined as removal, replacement or addition of any component of a joint replacement. Revisions can be further classified as major revisions (removal of a component articulating with bone-usually the stem and/or the shell) or minor revisions (removal of other components-usually the head and/or the liner). The unadjusted cumulative percent revision after the primary arthroplasty (with 95% confidence intervals) was calculated and compared using Cox proportional hazard models adjusted for age.

RESULTS

The BHR prosthesis had a statistically higher rate of all-cause revision at 17 years than the selected conventional THA prostheses (HR 2.77 [95% CI 1.78 to 4.32]; p < 0.001). The revision diagnoses differed between the groups, with the BHR demonstrating a higher revision rate for loosening after 2 years than the conventional THA protheses (HR 4.64 [95% CI 1.66 to 12.97]; p = 0.003), as well as a higher fracture rate during the entire period (HR 2.57 [95% CI 1.24 to 5.33]; p = 0.01). There was a lower revision rate for infection for the BHR compared with the THA group in the first 5 years, with no difference between the two groups after this time. All revisions of the BHR were major revisions (such as, removal or exchange of the femoral and/or acetabular components) and this occurred in 4.5% of the primary BHR procedures. Major revision was the most common type of revision for primary THA accounting for 1.7% of all primary THA procedures. Minor revisions (head, inset or both) were undertaken in a further 0.6% of primary THA procedures.

CONCLUSIONS

Given the increasing revision risk of the BHR compared with better-performing conventional THA prostheses in the target population, we recommend that patients be counseled about this risk. We suggest that a THA with proven low revision rates might be the better choice, particularly for patients who are concerned about implant durability. Well-controlled prospective studies that show appreciable clinically important differences in patient-reported outcomes and functional results favoring the BHR over conventional THA prostheses using modern bearings are needed to justify the use of the BHR in view of this revision risk.

LEVEL OF EVIDENCE

Level III, therapeutic study.

Quality, but not quantity of physical activity is associated with metal ion concentrations in unilateral hip resurfacing

Little is known about the influence of physical activity (PA) on metal ion concentrations in subjects with metal-on-metal hip arthroplasty. Implant wear is thought to be a function of use and thus of patient activity levels. It is hypothesized that daily habitual PA of patients with hip resurfacing arthroplasty (HRA) is associated with metal ion concentrations. Therefore a study was conducted in patients with a unilateral HRA at 10-years follow-up. Blood metal ion concentrations were determined. An acceleration-based activity monitor was used to measure PA in daily life. The cohort consisted of 12 males (75%) and 4 females (25%) with a median age at surgery of 55.5 ± 9.7 years [43.0-67.9] and a median follow-up of 9.9 ± 1.0 years [9.1-10.9]. The median cobalt and chromium ion concentrations were 25 ± 13 and 38 ± 28 nmol/L. A significant association between sit-stand transfers and high-intensity peaks with cobalt ion concentrations were found. Regarding PA and metal ion concentrations as a proxy of wear in HRA, specific activities like transfers or qualitative aspects of activity behavior like intensity, seem to matter more than the quantity of low-intensity activities like walking or cycling. This suggests that patients may safely engage in such activities to achieve important general health benefits and quality of life.

Sub-toxic levels of Co2+ are anti-inflammatory and protect cartilage from degradation caused by IL-1β

BACKGROUND

Cobalt ions from some orthopaedic implants induce a dose-dependent cytotoxic and pro-inflammatory response. Recent studies show that sub-toxic levels of cobalt influence actin organisation regulating fibroblasts and macrophages behaviour. However little is known about the influence of sub-toxic levels of cobalt on articular cartilage biology and biomechanics. Previously, we have reported that IL-1β signalling in chondrocytes, is regulated by primary cilia and associated intraflagellar transport. Since primary cilia expression is modulated by actin organisation, we set out to test the hypothesis that sub-toxic levels of cobalt regulate cilia expression and IL-1β signalling thereby influencing articular cartilage degradation.

METHODS

Isolated chondrocytes and bovine cartilage explants were subjected to Co²⁺ in the presence and absence of IL-1β. Primary cilia were monitored by confocal immunofluorescence. Nitric oxide and PGE₂ release were used to monitor IL-1β signalling. Degradation of cartilage matrix was assessed by the release of sGAG and the biomechanical properties of the tissue in uniaxial unconfined compression.

FINDINGS

Sub-toxic levels of Co²⁺ (50 μM) blocked IL-1β-induced primary cilia elongation in isolated chondrocytes. This was associated with disruption of pro-inflammatory signalling in both isolated chondrocytes and cartilage explants, and inhibition of cartilage matrix degradation and loss of biomechanical properties.

INTERPRETATION

This study reveals that low levels of cobalt ions are anti-inflammatory, preventing cartilage degradation in response to IL-1β. This mechanism is associated with regulation of primary cilia elongation. These observations provide new insight into the potential beneficial role of cobalt and may lead to novel mechanisms for controlling cartilage inflammation.

Metal-Specific Biomaterial Accumulation in Human Peri-Implant Bone and Bone Marrow

Metallic implants are frequently used in medicine to support and replace degenerated tissues. Implant loosening due to particle exposure remains a major cause for revision arthroplasty. The exact role of metal debris in sterile peri-implant inflammation is controversial, as it remains unclear whether and how metals chemically alter and potentially accumulate behind an insulating peri-implant membrane, in the adjacent bone and bone marrow (BM). An intensively focused and bright synchrotron X-ray beam allows for spatially resolving the multi-elemental composition of peri-implant tissues from patients undergoing revision surgery. In peri-implant BM, particulate cobalt (Co) is exclusively co-localized with chromium (Cr), non-particulate Cr accumulates in the BM matrix. Particles consisting of Co and Cr contain less Co than bulk alloy, which indicates a pronounced dissolution capacity. Particulate titanium (Ti) is abundant in the BM and analyzed Ti nanoparticles predominantly consist of titanium dioxide in the anatase crystal phase. Co and Cr but not Ti integrate into peri-implant bone trabeculae. The characteristic of Cr to accumulate in the intertrabecular matrix and trabecular bone is reproducible in a human 3D in vitro model. This study illustrates the importance of updating the view on long-term consequences of biomaterial usage and reveals toxicokinetics within highly sensitive organs.

Association between surgical volume and failure of primary total hip replacement in England and Wales: findings from a prospective national joint replacement register

OBJECTIVE

To investigate the association of volume of total hip arthroplasty (THA) between consultants and within the same consultant in the previous year and the hazard of revision using multilevel survival models.

DESIGN

Prospective cohort study using data from a national joint replacement register.

SETTING

Elective THA across all private and public centres in England and Wales between April 2003 and February 2017.

PARTICIPANTS

Patients aged 50 years or more undergoing THA for osteoarthritis.

INTERVENTION

The volume of THA conducted in the preceding 365 days to the index procedure.

MAIN OUTCOME AND MEASURE

Revision surgery (excision, addition or replacement) of a primary THA.

RESULTS

Of the 579 858 patients undergoing primary THA (mean baseline age 69.8 years (SD 10.2)), 61.1% were women. Multilevel survival found differing results for between and within-consultant effects. There was a strong volume-revision association between consultants, with a near-linear 43.3% (95% CI 29.1% to 57.4%) reduction of the risk of revision comparing consultants with volumes between 1 and 200 procedures annually. Changes in individual surgeons (within-consultant) case volume showed no evidence of an association with revision.

CONCLUSION

Separation of between-consultant and within-consultant effects of surgical volume reveals how volume contributes to the risk of revision after THA. The lack of association within-consultants suggests that individual changes to consultant volume alone will have little effect on outcomes following THA.These novel findings provide strong evidence supporting the practice of specialisation of hip arthroplasty. It does not support the practice of low-volume consultants increasing their personal volume as it is unlikely their results would improve if this is the only change. Limiting the exposure of patients to consultants with low volumes of THA and greater utilisation of centres with higher volume surgeons with better outcomes may be beneficial to patients.

Analysis of change in patient-reported outcome measures with floor and ceiling effects using the multilevel Tobit model: a simulation study and an example from a National Joint Register using body mass index and the Oxford Hip Score

OBJECTIVES

This study has three objectives. (1) Investigate the association between body mass index (BMI) and the efficacy of primary hip replacement using a patient-reported outcome measure (PROMs) with a measurement floor and ceiling, (2) Explore the performance of different estimation methods to estimate change in PROMs score following surgery using a simulation study and real word data where data has measurement floors and ceilings and (3) Lastly, develop guidance for practising researchers on the analysis of PROMs in the presence of floor and ceiling effects.

DESIGN

Simulation study and prospective national medical device register.

SETTING

National Register of Joint Replacement and Medical Devices.

METHODS

Using a Monte Carlo simulation study and data from a national joint replacement register (162 513 patients with pre- and post-surgery PROMs), we investigate simple approaches for the analysis of outcomes with floor and ceiling effects that are measured at two occasions: linear and Tobit regression (baseline adjusted analysis of covariance, change-score analysis, post-score analysis) in addition to linear and multilevel Tobit models.

PRIMARY OUTCOME

The primary outcome of interest is change in PROMs from pre-surgery to 6 months post-surgery.

RESULTS

Analysis of data with floor and ceiling effects with models that fail to account for these features induce substantial bias. Single-level Tobit models only correct for floor or ceiling effects when the exposure of interest is not associated with the baseline score. In observational data scenarios, only multilevel Tobit models are capable of providing unbiased inferences.

CONCLUSIONS

Inferences from pre- post-studies that fail to account for floor and ceiling effects may induce spurious associations with substantial risk of bias. Multilevel Tobit models indicate the efficacy of total hip replacement is independent of BMI. Restricting access to total hip replacement based on a patients BMI can not be supported by the data.

The ototoxic potential of cobalt from metal-on-metal hip implants: a pilot study on the patient-reported auditory, vestibular, and general neurological outcome

OBJECTIVE

This study aimed to systematically investigate the ototoxic potential of cobalt in patients with a metal-on-metal (MoM) hip implant, using objective auditory and vestibular assessments and a questionnaire. The results of the objective evaluation were published previously, whereas the current study focused on the questionnaire outcome and its relationship to the blood cobalt level. Design and study sample: Twenty patients (33-65 years) with a primary MoM hip implant and 20 non-implanted control subjects, matched for age, gender, and noise exposure, received a questionnaire to evaluate the presence of several hearing and balance symptoms (part 1) and general neurological issues (part 2).

RESULTS

Concerning part 1, the proportion of auditory-related symptoms in general (p = 0.022) and tinnitus (p = 0.047) was significantly higher in the MoM patient group, whereas no group difference was found for hyperacusis, increased listening effort, and decreased speech understanding. Concerning part 2, no significant group differences were detected. Within the MoM patient group, the questionnaire outcome was not significantly different between the low-exposure and high-exposure subgroups according to the blood Co level.

CONCLUSIONS

In line with our previous study, these results potentially imply Co-induced impairment to the auditory system, despite the lack of a clear dose-response relationship.

Patient and surgical variability in the primary stability of cementless acetabular cups: A finite element study

Aseptic loosening is the most common indication for revision of cementless acetabular cups and often depends on the primary stability achieved following surgery. Cup designs must be capable of achieving primary stability for a wide variety of individuals and surgical conditions to be successful. Typically, preclinical finite element (FE) testing of cups involves assessing the performance in a single patient and under a limited set of idealized conditions. The aim of this study was to assess the effect of patient and surgical parameters on the primary stability of an acetabular cup design in a set of subject-specific FE models. Interference fit was varied in a representative set of 12 patient-specific models of the implanted hemipelvis. Linear mixed models showed a significant association with micromotion for interference fit (P < .0001), acetabular bone elastic modulus (P < .001), native acetabular diameter (P  = .03), and the interference fit-elastic modulus interaction (P = .01). There were no significant associations between the polar gap and any of the parameters considered. The significant interference fit-elastic modulus interaction suggests that increasing the interference fit in patients with low bone quality leads to a greater reduction in micromotion than in patients with higher bone quality. However, the significant association between percentage bone yielding and interference fit (P < .0001) suggests a higher periacetabular fracture risk at higher interference fits. This work supports the development of preclinical testing of cup designs for the broad range patients and surgical conditions a cup may face following surgery.

Development and early findings of a semiautomated arthroplasty registry in a multi-institutional healthcare network

AIMS

The primary aim of this paper was to outline the processes involved in building the Partners Arthroplasty Registry (PAR), established in April 2016 to capture baseline and outcome data for patients undergoing arthroplasty in a regional healthcare system. A secondary aim was to determine the quality of PAR's data. A tertiary aim was to report preliminary findings from the registry and contributions to quality improvement initiatives and research up to March 2019.

METHODS

Structured Query Language was used to obtain data relating to patients who underwent total hip or knee arthroplasty (THA and TKA) from the hospital network's electronic medical record (EMR) system to be included in the PAR. Data were stored in a secure database and visualized in dashboards. Quality assurance of PAR data was performed by review of the medical records. Capture rate was determined by comparing two months of PAR data with operating room schedules. Linear and binary logistic regression models were constructed to determine if length of stay (LOS), discharge to a care home, and readmission rates improved between 2016 and 2019.

RESULTS

The PAR captured 16,163 THAs and TKAs between April 2016 and March 2019, performed in seven hospitals by 110 surgeons. Manual comparison to operating schedules showed a 100% capture rate. Review of the records was performed for 2,603 random operations; 2,298 (88.3%) had complete and accurate data. The PAR provided the data for three abstracts presented at international conferences and has led to preoperative mental health treatment as a quality improvement initiative in the participating institutions. For primary THA and TKA surgeries, the LOS decreased significantly (p < 0.001) and the rate of home discharge increased significantly (p < 0.001) between 2016 and 2019. Readmission rates did not correlated with the date of surgery (p = 0.953).

CONCLUSION

The PAR has high rates of coverage (the number of patients treated within the Partners healthcare network) and data completion and can be used for both research purposes and quality improvement. The same method of creating a registry that was used in the PAR can be applied to hospitals using similar EMR systems. Cite this article: Bone Joint J 2020;102-B(7 Supple B):90-98.

Developing Registries and Effective Care Models for the Management of Hip Fractures: Aligning Political, Organizational Drivers with Clinical Outcomes

PURPOSE OF REVIEW

The aim of the review is to conduct a literature search on cost-effectiveness or cost savings of osteoporosis fracture liaison services.

RECENT FINDINGS

We identified four types of FLS. A total of 11 cost-effectiveness studies examining 15 models of secondary fracture prevention models were identified. Nine models were found to be cost-saving, and five were found to be cost-effective. It is possible to adopt a cost-effective model for fracture liaison services and expand across geographical regions. Adopting registries can have the added benefit of monitoring quality improvement practices and treatment outcomes. Challenges exist in implementing registries where centralized data collections across different chronic conditions are politically driving agendas. In order to align political and organizational strategic plans, a core set of outcome evaluations that are both focused on patient and provider experience in addition to treatment outcomes can be a step toward achieving better health and services.