Design of thermally responsive, recombinant polypeptide carriers for targeted drug delivery

Multifunctional elastin-like polypeptide nanocarriers for efficient miRNA delivery in cancer therapy

BACKGROUND

The exogenous delivery of miRNA to mimic and restore miRNA-34a activity in various cancer models holds significant promise in cancer treatment. Nevertheless, its effectiveness is often impeded by challenges, including a short half-life, propensity for off-target accumulation, susceptibility to inactivation by blood-based enzymes, concerns regarding patient safety, and the substantial cost associated with scaling up. As a means of overcoming these barriers, we propose the development of miRNA-loaded Tat-A86 nanoparticles by virtue of Tat-A86's ability to shield the loaded agent from external environmental factors, reducing degradation and inactivation, while enhancing circulation time and targeted accumulation.

RESULTS

Genetically engineered Tat-A86, featuring 16 copies of the interleukin-4 receptor (IL-4R)-binding peptide (AP1), Tat for tumor penetration, and an elastin-like polypeptide (ELP) for presenting target ligands and ensuring stability, served as the basis for this delivery system. Comparative groups, including Tat-E60 and A86, were employed to discern differences in binding and penetration. The designed ELP-based nanoparticle Tat-A86 effectively condensed miRNA, forming stable nanocomplexes under physiological conditions. The miRNA/Tat-A86 formulation bound specifically to tumor cells and facilitated stable miRNA delivery into them, effectively inhibiting tumor growth. The efficacy of miRNA/Tat-A86 was further evaluated using three-dimensional spheroids of lewis lung carcinoma (LLC) as in vitro model and LLC tumor-bearing mice as an in vivo model. It was found that miRNA/Tat-A86 facilitates effective cell killing by markedly improving miRNA penetration, leading to a substantial reduction in the size of LLC spheroids. Compared to other controls, Tat-A86 demonstrated superior efficacy in suppressing the growth of 3D cellular aggregates. Moreover, at equivalent doses, miRNA-34a delivered by Tat-A86 inhibited the growth of LLC cells in allograft mice.

CONCLUSIONS

Overall, these studies demonstrate that Tat-A86 nanoparticles can deliver miRNA systemically, overcoming the basic hurdles impeding miRNA delivery by facilitating both miRNA uptake and stability, ultimately leading to improved therapeutic effects.

Steric stabilization of bioactive nanoparticles using elastin-like polypeptides

Elastin-like polypeptides (ELP) are versatile, thermo-responsive polymers that can be conjugated to virtually any therapeutic cargo. Derived from short amino-acid sequences and abundant in humans, certain ELPs display low immunogenicity. Substrates for endogenous proteases, ELPs are biodegradable and thus, are candidate biomaterials. Peptides and proteins can be directly coupled with ELPs through genetic engineering, while other polymers and small molecules can be appended through covalent bioconjugation or non-covalent complexation. ELPs that phase separate at physiological temperatures can form the core of nano assemblies; however, ELPs that remain soluble can sterically stabilize the corona of a variety of nanoparticles. Nanoparticles with ELPs at their corona promote colloids with favorable pharmacokinetic (PK) properties that enables therapeutic efficacy with intermittent administration. This review highlights a comprehensive spectrum of ELP fusions shown to stabilize the solubility, and sometimes bioactivity, of their cargo - with a focus on biophysical properties that underlie their therapeutic effects.

Protein-Functionalized Gold Nanospheres with Tunable Photothermal Efficiency for the Near-Infrared Photothermal Ablation of Biofilms

Temperature-responsive nanostructures with high antimicrobial efficacy are attractive for therapeutic applications against multidrug-resistant bacteria. Here, we report temperature-responsive nanospheres (TRNs) engineered to undergo self-association and agglomeration above a tunable transition temperature (Tt). The temperature-responsive behavior of the nanoparticles is obtained by functionalizing citrate-capped spherical gold nanoparticles (AuNPs) with elastin-like polypeptides (ELPs). Using protein design principles, we achieve a broad range of attainable Tt values and photothermal conversion efficiencies (η). Two approaches were used to adjust this range: First, by altering the position of the cysteine residue used to attach ELP to the AuNP, we attained a Tt range from 34 to 42 °C. Then, by functionalizing the AuNP with an additional small globular protein, we could extend this range to 34-50 °C. Under near-infrared (NIR) light exposure, all TRNs exhibited reversible agglomeration. Moreover, they showed an enhanced photothermal conversion efficiency in their agglomerated state relative to the dispersed state. Despite their spherical shape, TRNs have a photothermal conversion efficiency approaching that of gold nanorods (η = 68 ± 6%), yet unlike nanorods, the synthesis of TRNs requires no cytotoxic compounds. Finally, we tested TRNs for the photothermal ablation of biofilms. Above Tt, NIR irradiation of TRNs resulted in a 10,000-fold improvement in killing efficiency compared to untreated controls (p < 0.0001). Below Tt, no enhanced antibiofilm effect was observed. In conclusion, engineering the interactions between proteins and nanoparticles enables the tunable control of TRNs, resulting in a novel antibiofilm nanomaterial with low cytotoxicity.

Physicochemical Characterization of a Biomimetic, Elastin-Inspired Polypeptide with Enhanced Thermoresponsive Properties and Improved Cell Adhesion

Genetic engineering allows fine-tuning and controlling protein properties, thus exploiting the new derivatives to obtain novel materials and systems with improved capacity to actively interact with biological systems. The elastin-like polypeptides are tunable recombinant biopolymers that have proven to be ideal candidates for realizing bioactive interfaces that can interact with biological systems. They are characterized by a thermoresponsive behavior that is strictly related to their peculiar amino acid sequence. We describe here the rational design of a new biopolymer inspired by elastin and the comparison of its physicochemical properties with those of another already characterized member of the same protein class. To assess the cytocompatibility, the behavior of cells of different origins toward these components was evaluated. Our study shows that the biomimetic strategy adopted to design new elastin-based recombinant polypeptides represents a versatile and valuable tool for the development of protein-based materials with improved properties and advanced functionality.

Biosynthesis of Multifunctional Transformable Peptides for Inducing Tumor Cell Apoptosis

Engineered nanomaterials hold great promise to improve the specificity of disease treatment. Herein, a fully protein-based material is obtained from nonpathogenic Escherichia coli (E. coli), which is capable of morphological transformation from globular to fibrous in situ for inducing tumor cell apoptosis. The protein-based material P1 is comprised of a β-sheet-forming peptide KLVFF, pro-apoptotic protein BAK, and GFP along with targeting moieties. The self-assembled nanoparticles of P1 transform into nanofibers in situ in the presence of cathepsin B, and the generated nanofibrils favor the dimerization of functional BH3 domain of BAK on the mitochondrial outer membrane, leading to efficient anticancer activity both in vitro and in vivo via mitochondria-dependent apoptosis through Bcl-2 pathway. To precisely manipulate the morphological transformation of biosynthetic molecules in living cells, a spatiotemporally controllable anticancer system is constructed by coating P1-expressing E. coli with cationic conjugated polyelectrolytes to release the peptides in situ under light irradiation. The biosynthetic peptide-based enzyme-catalytic transformation strategy in vivo would offer a novel perspective for targeted delivery and shows great potential in precision disease therapeutics.

Near-Infrared Photothermal Ablation of Biofilms using ProteinFunctionalized Gold Nanospheres with a Tunable Temperature Response

Temperature-responsive nanostructures with high antimicrobial efficacy are attractive for therapeutic applications against multi-drug-resistant bacteria. Here, we report temperature-responsive nanospheres (TRNs) that are engineered to undergo self-association and agglomeration above a tunable transition temperature (Tt). Temperature-responsive behavior of the nanoparticles is obtained by functionalizing citrate-capped, spherical gold nanoparticles (AuNPs) with elastin-like polypeptides (ELPs). Using protein design principles, we achieve a broad range of attainable Tt values and photothermal conversion efficiencies (η). Two approaches were used to adjust this range: First, by altering the position of the cysteine residue used to attach ELP to the AuNP, we attained a Tt range from 34-42 °C. Then, functionalizing the AuNP with an additional small globular protein, we were able to extend this range to 34-50 °C. Under near-infrared (NIR) light exposure, all TRNs exhibited reversible agglomeration. Moreover, they showed enhanced photothermal conversion efficiency in their agglomerated state relative to the dispersed state. Despite their spherical shape, TRNs have a photothermal conversion efficiency approaching that of gold nanorods (η = 68±6%), yet unlike nanorods, the synthesis of TRNs requires no cytotoxic compounds. Finally, we tested TRNs for photothermal ablation of biofilms. Above Tt, NIR irradiation of TRNs resulted in a 10,000-fold improvement in killing efficiency compared to untreated controls (p < 0.0001). Below Tt, no enhanced anti-biofilm effect was observed. In conclusion, engineering the interactions between proteins and nanoparticles enables the tunable control of TRNs, resulting in a novel, anti-biofilm nanomaterial with low cytotoxicity.

Biomimetic SARS-CoV-2 Spike Protein Nanoparticles

COVID-19 is an infectious respiratory disease caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). This virus contains a crucial coat protein that engages with target cells via a receptor binding domain (RBD) on its spike protein. To better study the RBD and its therapeutic opportunities, we genetically engineered a simple fusion with a thermo-responsive elastin-like polypeptide (ELP). These fusions express in Escherichia coli at a high yield in the soluble fraction and were easily purified using ELP-mediated phase separation (79 mg/L culture). Interestingly, they assembled peptide-based nanoparticles (Rh = 71.4 nm), which was attributed to oligomerization of RBDs (25.3 kDa) counterbalanced by steric stabilization by a soluble ELP (73.4 kDa). To investigate their biophysical properties, we explored the size, shape, and binding affinity for the human angiotensin-converting enzyme 2 (hACE2) and cellular uptake. Biomimetic nanoparticles such as these may enable future strategies to target the same cells, tissues, and cell-surface receptors as those harnessed by SARS-CoV-2.

Synthetic biology-guided design and biosynthesis of protein polymers for delivery

Vehicles derived from genetically engineered protein polymers have gained momentum in the field of biomedical engineering due to their unique designability, remarkable biocompatibility and excellent biodegradability. However, the design and production of these protein polymers with on-demand sequences and supramolecular architectures remain underexplored, particularly from a synthetic biology perspective. In this review, we summarize the state-of-the art strategies for constructing the highly repetitive genes encoding the protein polymers, and highlight the advanced approaches for metabolically engineering expression hosts towards high-level biosynthesis of the target protein polymers. Finally, we showcase the typical protein polymers utilized to fabricate delivery vehicles.

Hydrophilic Natural Polylysine as Drug Nanocarrier for Preparation of Helical Delivery System

Polypeptide materials have clear secondary structure and biodegradability, which can be further modified and functionalized, so that they can be employed as therapeutic agents in clinical applications. PEGylation of polylysine (PEG-PLL) is a kind of safe and effective nanocarrier that is utilized for gene and drug delivery. However, PEG-PLL needs to be produced through chemical synthesis, which is expensive and difficult to obtain. We hope to simplify the nanocarrier and use hydrophilic natural polylysine (PLL) to develop a high-efficacy delivery system. To evaluate the possibility of PLL as nanocarriers, methotrexate (MTX) is selected as a model drug and PEG-PLL is utilized as control nanocarriers. The experimental results showed that PLL is an ideal polypeptide to prepare MTX-loaded PLL nanoparticles (PLL/MTX NPs). Compared with PEG-PLL as nanocarriers, PLL/MTX NPs showed higher drug-loading content (58.9%) and smaller particle sizes (113.7 nm). Moreover, the shape of PLL/MTX NPs was a unique helical nanorod. The PLL/MTX NPs had good storage stability, media stability, and sustained release effect. Animal research demonstrated that PLL/MTX NPs could improve the anti-tumor activity of MTX, the antitumor efficacy is enhanced 1.9-fold and 1.2-fold compared with MTX injection and PEG-PLL/MTX NPs, respectively. To sum up, natural polymer PLL is an ideal nano drug delivery carrier which has potential clinical applications.

Brachytherapy via a depot of biopolymer-bound 131I synergizes with nanoparticle paclitaxel in therapy-resistant pancreatic tumours

Locally advanced pancreatic tumours are highly resistant to conventional radiochemotherapy. Here we show that such resistance can be surmounted by an injectable depot of thermally responsive elastin-like polypeptide (ELP) conjugated with iodine-131 radionuclides (131I-ELP) when combined with systemically delivered nanoparticle albumin-bound paclitaxel. This combination therapy induced complete tumour regressions in diverse subcutaneous and orthotopic mouse models of locoregional pancreatic tumours. 131I-ELP brachytherapy was effective independently of the paclitaxel formulation and dose, but external beam radiotherapy (EBRT) only achieved tumour-growth inhibition when co-administered with nanoparticle paclitaxel. Histological analyses revealed that 131I-ELP brachytherapy led to changes in the expression of intercellular collagen and junctional proteins within the tumour microenvironment. These changes, which differed from those of EBRT-treated tumours, correlated with the improved delivery and accumulation of paclitaxel nanoparticles within the tumour. Our findings support the further translational development of 131I-ELP depots for the synergistic treatment of localized pancreatic cancer.

Calcium-Differentiated Cellular Internalization of Allosteric Framework Nucleic Acids for Targeted Payload Delivery

Target delivery systems have extensively shown promising applications in cancer therapy, and many of them function smartly by responding to the cancer cell microenvironment. Here, we for the first time report Ca²⁺-differentiated cellular internalization of 2D/3D framework nucleic acids (FNAs), enabling the engineering of a conceptually new target delivery system using an allosteric FNA nanovehicle. The FNA vehicle is subject to a 2D-to-3D transformation on the cancer cell surface via G-quadruplexes responding to environmental K⁺ and thereby allows its cell entry to be more efficiently promoted by Ca²⁺. This design enables the FNA vehicle to target cancer cells and selectively deliver an antisense strand-containing cargo for live-cell mRNA imaging. It would open new avenues toward targeted drug delivery and find extensive applications in precise disease treatment.

Application of elastin-like polypeptide (ELP) containing extra-cellular matrix (ECM) binding ligands in regenerative medicine

Extracellular matrix (ECM) molecules play an important role in regulating molecular signaling associated with proliferation, migration, differentiation, and tissue repair. The identification of new kinds of ECM mimic biomaterials to recapitulate critical functions of biological systems are important for various applications in tissue engineering and regenerative medicine. The use of human elastin derived materials with controlled biological properties and other functionalities to improve their cell-response was proposed. Herein, we reported genetic encoded synthesis of ELP (elastin-like polypeptide) containing ECM domains like RGD (integrin binding ligand) and YIGSR (laminin-selective receptor binding ligand) to regulate cell behaviour in more complex ways, and also better model natural matrices. Thermal responsiveness of the ELPs and structural conformation were determined to confirm its phase transition behaviour. The fusion ELPs derivatives were analysed for mechanical involvement of growth mechanism, regenerative, and healing processes. The designed fusion ELPs promoted fast and strong attachment of fibroblast cells. The fusion ELP derivatives enhanced the migration of keratinocyte cells which of crucial for wound healing. Together it provides a profound matrix for endothelial cells and significantly enhanced tube formation of HUVEC cells. Thus, strategy of using cell adhesive ELP biopolymer emphasizing the role of bioactive ELPs as next generation skin substitutes for regenerative medicine.

Design of Smart Size-, Surface-, and Shape-Switching Nanoparticles to Improve Therapeutic Efficacy

Multiple biological barriers must be considered in the design of nanomedicines, including prolonged blood circulation, efficient accumulation at the target site, effective penetration into the target tissue, selective uptake of the nanoparticles into target cells, and successful endosomal escape. However, different particle sizes, surface chemistries, and sometimes shapes are required to achieve the desired transport properties at each step of the delivery process. In response, this review highlights recent developments in the design of switchable nanoparticles whose size, surface chemistry, shape, or a combination thereof can be altered as a function of time, a disease-specific microenvironment, and/or via an externally applied stimulus to enable improved optimization of nanoparticle properties in each step of the delivery process. The practical use of such nanoparticles in chemotherapy, bioimaging, photothermal therapy, and other applications is also discussed.

Stimuli-Responsive Natural Proteins and Their Applications

Natural proteins are essential biomacromolecules that fulfill versatile functions in the living organism, such as their usage as cytoskeleton, nutriment transporter, homeostasis controller, catalyzer, or immune guarder. Due to the excellent mechanical properties and good biocompatibility/biodegradability, natural protein-based biomaterials are well equipped for prospective applications in various fields. Among these natural proteins, stimuli-responsive proteins can be reversibly and precisely manipulated on demand, rendering the protein-based biomaterials promising candidates for numerous applications, including disease detection, drug delivery, bio-sensing, and regenerative medicine. Therefore, we present some typical natural proteins with diverse physical stimuli-responsive properties, including temperature, light, force, electrical, and magnetic sensing in this review. The structure-function mechanism of these proteins is discussed in detail. Finally, we give a summary and perspective for the development of stimuli-responsive proteins.

Protein Hydrogels: The Swiss Army Knife for Enhanced Mechanical and Bioactive Properties of Biomaterials

Biomaterials are dynamic tools with many applications: from the primitive use of bone and wood in the replacement of lost limbs and body parts, to the refined involvement of smart and responsive biomaterials in modern medicine and biomedical sciences. Hydrogels constitute a subtype of biomaterials built from water-swollen polymer networks. Their large water content and soft mechanical properties are highly similar to most biological tissues, making them ideal for tissue engineering and biomedical applications. The mechanical properties of hydrogels and their modulation have attracted a lot of attention from the field of mechanobiology. Protein-based hydrogels are becoming increasingly attractive due to their endless design options and array of functionalities, as well as their responsiveness to stimuli. Furthermore, just like the extracellular matrix, they are inherently viscoelastic in part due to mechanical unfolding/refolding transitions of folded protein domains. This review summarizes different natural and engineered protein hydrogels focusing on different strategies followed to modulate their mechanical properties. Applications of mechanically tunable protein-based hydrogels in drug delivery, tissue engineering and mechanobiology are discussed.

Self-assembled elastin-like polypeptide fusion protein coacervates as competitive inhibitors of advanced glycation end-products enhance diabetic wound healing

Chronic and non-healing skin wounds are some of the most significant complications in patients with advanced diabetes. A contributing mechanism to this pathology is the non-enzymatic glycation of proteins due to hyperglycemia, leading to the formation of advanced glycation end products (AGEs). AGEs bind to the receptor for AGEs (RAGE), which triggers pro-inflammatory signals that may inhibit the proliferative phase of wound healing. Soluble forms of RAGE (sRAGE) may be used as a competitive inhibitor of AGE-mediated signaling; however, sRAGE is short-lived in the highly proteolytic wound environment. We developed a recombinant fusion protein containing the binding domain of RAGE (vRAGE) linked to elastin-like polypeptides (ELPs) that self-assembles into coacervates at around 30-31 °C. The coacervate size was concentration and temperature-dependent, ranging between 500 and 1600 nm. vRAGE-ELP reversed several AGE-mediated changes in cultured human umbilical vein endothelial cells, including a decrease in viable cell number, an increase in levels of reactive oxygen species (ROS), and an increased expression of the pro-inflammatory marker, intercellular adhesion molecule-1 (ICAM-1). vRAGE-ELP was stable in elastase in vitro for 7 days. When used in a single topical application on full-thickness excisional skin wounds in diabetic mice, wound closure was accelerated, with 90% and 100% wound closure on post-wounding days 28 and 35, respectively, compared to 62% and 85% on the same days in animals treated with vehicle control, consisting of ELP alone. This coacervate system topically delivering a competitive inhibitor of AGEs has potential for the treatment of diabetic wounds.

Self-Assembly or Coassembly of Multiresponsive Histidine-Containing Elastin-Like Polypeptide Block Copolymers

In this study a histidine containing elastin-like polypeptide (ELP) diblock copolymer is described with multiresponsive assembly behavior. Self-assembly into micelles is examined by two methods. First, the self-assembly is triggered by the addition of divalent metal ions, with Zn²⁺ being the most suitable one. Increasing the Zn²⁺ concentration stabilizes the nanoparticles over a large temperature window (4-45 °C). This diblock exhibits furthermore pH-responsiveness, and particles disassemble under mildly acidic conditions. Second, the coassembly of this ELP with a diblock ELP is examined, which is not responsive to pH and metal ions. Coassembly is triggered by heating the ELPs quickly above the transition temperature of the less hydrophobic block, which results in stable nanoparticles without the need to add metal ions. This novel ELP system offers a versatile modular nanocarrier platform that can respond to different stimuli and can be tuned effectively.

Targeting of Cisplatin-Resistant Melanoma Using a Multivalent Ligand Presenting an Elastin-like Polypeptide

Acquired drug resistance is a common occurrence and the main cause of melanoma treatment failure. Melanoma cells frequently developed resistance against cisplatin during chemotherapy, and thus, targeting delivery systems have been devised to decrease drug resistance, increase therapeutic efficacy, and reduce side effects. We genetically engineered a macromolecular carrier using the recursive directional ligation method that specifically targets cisplatin-resistant (Cis-R) melanoma. This carrier is composed of an elastin-like polypeptide (ELP) and multiple copies of Cis-R melanoma-targeting ligands (M-peptide). The designed M₁₆E₁₀₈ contains 16 targeting ligands incorporated within an ELP and has an ideal thermal phase transition at 39 °C. When treated to melanoma cells, M₁₆E₁₀₈ specifically accumulated in Cis-R B16F10 melanoma cells and accumulated to a lesser extent in parental B16F10 cells. Consistently, M₁₆E₁₀₈ exhibited efficient homing and longer retention in tumor tissues in Cis-R melanoma-bearing mice than in parental B16F10 melanoma-bearing mice. Thus, M₁₆E₁₀₈ was found to display considerable potential as a novel agent that specifically targets cisplatin-resistant melanoma.

Thermally Targeted p50 Peptide Inhibits Proliferation and Induces Apoptosis of Breast Cancer Cell Lines

The application of rationally designed therapeutic peptides (TP) may improve outcomes in cancer treatment. These peptides hold the potential to directly target proliferative pathways and stimulate cell arrest or death pathways. Elastin-like polypeptide (ELP) is an elastin derived biopolymer that undergoes a thermally mediated phase transition. This study employs p50, a nuclear localization sequence derived peptide that inhibits the activation of NFκB and is implicated in cancer cell survival and metastasis. In order to effectively delivery p50, it is conjugated to SynB1-ELP1, a thermally responsive macromolecular carrier. By applying an external heat source, mild hyperthermic conditions (41 °C) induce aggregation and therefore can be used to specifically target ELP to solid tumors in cancer therapy. The addition of a cell penetrating peptide (CPP) to the N-terminus of the macromolecular carrier enhances the cellular uptake and directs the subcellular localization of the bioactive peptide. The novel TP, p50, inhibits proliferation and induces apoptosis of breast cancer cells by blocking the intranuclear import of NFκB. By expanding the repertoire of oncogenic targets, CPPs, and ELP carrier sizes, ELP-based polypeptides may be modulated to optimize the delivery of these novel therapies and allow for the flexibility to create individualized cancer therapies.

Semi-Interpenetrated Hydrogels-Microfibers Electroactive Assemblies for Release and Real-Time Monitoring of Drugs

Simultaneous drug release and monitoring using a single polymeric platform represents a significant advance in the utilization of biomaterials for therapeutic use. Tracking drug release by real-time electrochemical detection using the same platform is a simple way to guide the dosage of the drug, improve the desired therapeutic effect, and reduce the adverse side effects. The platform developed in this work takes advantage of the flexibility and loading capacity of hydrogels, the mechanical strength of microfibers, and the capacity of conducting polymers to detect the redox properties of drugs. The engineered platform is prepared by assembling two spin-coated layers of poly-γ-glutamic acid hydrogel, loaded with poly(3,4-ethylenedioxythiophene) (PEDOT) microparticles, and separated by a electrospun layer of poly-ε-caprolactone microfibers. Loaded PEDOT microparticles are used as reaction nuclei for the polymerization of poly(hydroxymethyl-3,4-ethylenedioxythiophene) (PHMeDOT), that semi-interpenetrate the whole three layered system while forming a dense network of electrical conduction paths. After demonstrating its properties, the platform is loaded with levofloxacin and its release monitored externally by UV-vis spectroscopy and in situ by using the PHMeDOT network. In situ real-time electrochemical monitoring of the drug release from the engineered platform holds great promise for the development of multi-functional devices for advanced biomedical applications.

100th Anniversary of Macromolecular Science Viewpoint: Synthetic Protein Hydrogels

Our bodies are composed of soft tissues made of various proteins. In contrast, most hydrogels designed for biological applications are made of synthetic polymers. Recently, it is increasingly recognized that genetically synthesized proteins can be tailored as building blocks of hydrogels with biological, chemical, and mechanical properties similar to native soft tissues. In this Viewpoint, we summarize recent progress in synthetic protein hydrogels. We compare the structural and mechanical properties of different protein building blocks. We discuss various biocompatible cross-linking strategies based on covalent chemical reactions and noncovalent physical interactions. We introduce how stimulus-responsive conformational changes or intermolecular interactions at the molecular level can be used to engineer responsive hydrogels. We highlight that hydrogel network structures are as important as the protein sequences for the properties and functions of protein hydrogels and should be carefully designed. Despite great progress and potentials of synthetic protein hydrogels, there are still quite a few unsettled challenges and unexploited opportunities, providing abundant room for future investigation and development, particularly as this field is quickly expanding beyond its initial stage. We discuss a number of possible directions, including optimizing protein production and reducing cost, engineering anisotropic hydrogels to better mimic native tissues, rationally designing hydrogel mechanical properties, investigating interplays of hydrogels and residing cells for 3D cell culture and organoid construction, and evaluating long-term cytotoxicity and immune response.

Engineering the Architecture of Elastin-Like Polypeptides: From Unimers to Hierarchical Self-Assembly

Well-defined tunable nanostructures formed through the hierarchical self-assembly of peptide building blocks have drawn significant attention due to their potential applications in biomedical science. Artificial protein polymers derived from elastin-like polypeptides (ELPs), which are based on the repeating sequence of tropoelastin (the water-soluble precursor to elastin), provide a promising platform for creating nanostructures due to their biocompatibility, ease of synthesis, and customizable architecture. By designing the sequence and composition of ELPs at the gene level, their physicochemical properties can be controlled to a degree that is unmatched by synthetic polymers. A variety of ELP-based nanostructures are designed, inspired by the self-assembly of elastin and other proteins in biological systems. The choice of building blocks determines not only the physical properties of the nanostructures, but also their self-assembly into architectures ranging from spherical micelles to elongated nanofibers. This review focuses on the molecular determinants of ELP and ELP-hybrid self-assembly and formation of spherical, rod-like, worm-like, fibrillar, and vesicle architectures. A brief discussion of the potential biomedical applications of these supramolecular assemblies is also included.

The Surface Science of Microarray Generation-A Critical Inventory

Microarrays are powerful tools in biomedical research and have become indispensable for high-throughput multiplex analysis, especially for DNA and protein analysis. The basis for all microarray processing and fabrication is surface modification of a chip substrate and many different strategies to couple probe molecules to such substrates have been developed. We present here a critical assessment of typical biochip generation processes from a surface science point of view. While great progress has been made from a molecular biology point of view on the development of qualitative assays and impressive results have been obtained on the detection of rather low concentrations of DNA or proteins, quantitative chip-based assays are still comparably rare. We argue that lack of stable and reliable deposition chemistries has led in many cases to suboptimal quantitative reproducibility, impeded further progress in microarray development and prevented a more significant penetration of microarray technology into the diagnostic market. We suggest that surface-attached hydrogel networks might be a promising strategy to achieve highly sensitive and quantitatively reproducible microarrays.

Sonothrombolysis with magnetic microbubbles under a rotational magnetic field

Thrombosis is an extremely critical clinical condition where a clot forms inside a blood vessel which blocks the blood flow through the cardiovascular system. Previous sonothrombolysis methods using ultrasound and microbubbles (MBs) often have a relatively low lysis rate due to the low microbubbles concentration at clot region caused by blood flow in the vessel. To solve this problem, the magnetic microbubbles (MMBs) that can be retained by an outer magnetic field against blood flow are used in this study. Here we report the development of a new method using the rotational magnetic field to trap and vibrate magnetic microbubbles at target clot region and then using an intravascular forward-looking ultrasound transducer to activate them acoustically. In this study, we investigated the influence of different blood flow conditions, vessel occlusion conditions (partial and fully occluded), clot ages (fresh, retracted), ultrasound parameters (input voltage, duty cycle) and rotational magnetic field parameters (amplitude, frequency) on the thrombolysis rate. The results showed that the additional use of magnetic microbubbles significantly enhances in vitro lysis of blood clot.

Production of protein-based polymers in Pichia pastoris

Materials science and genetic engineering have joined forces over the last three decades in the development of so-called protein-based polymers. These are proteins, typically with repetitive amino acid sequences, that have such physical properties that they can be used as functional materials. Well-known natural examples are collagen, silk, and elastin, but also artificial sequences have been devised. These proteins can be produced in a suitable host via recombinant DNA technology, and it is this inherent control over monomer sequence and molecular size that renders this class of polymers of particular interest to the fields of nanomaterials and biomedical research. Traditionally, Escherichia coli has been the main workhorse for the production of these polymers, but the methylotrophic yeast Pichia pastoris is finding increased use in view of the often high yields and potential bioprocessing benefits. We here provide an overview of protein-based polymers produced in P. pastoris. We summarize their physicochemical properties, briefly note possible applications, and detail their biosynthesis. Some challenges that may be faced when using P. pastoris for polymer production are identified: (i) low yields and poor process control in shake flask cultures; i.e., the need for bioreactors, (ii) proteolytic degradation, and (iii) self-assembly in vivo. Strategies to overcome these challenges are discussed, which we anticipate will be of interest also to readers involved in protein expression in P. pastoris in general.

Generation of a Monoclonal Antibody to Detect Elastin-like Polypeptides

The identification and use of antibodies dominate the biologic, clinical diagnostic, and therapeutic landscapes. In particular, antibodies have become essential tools in a variety of protein analytical experiments and to study the disposition of biologic therapeutics. One emerging class of peptide biologics is known as the elastin-like polypeptides (ELPs), which are repetitive protein polymers inspired by human tropoelastin. A major limitation in the clinical translation of ELP biologics has been a lack of a monoclonal antibody (mAb) to characterize their identity during expression. To facilitate these studies, we successfully generated a new mAb that is specific toward ELPs and ELP fusion proteins. A purified antibody was evaluated in an ELISA, western blotting, and immunofluorescence assay. The optimal anti-ELP mAb proved to be highly reactive and specific toward ELPs. Moreover, they were able to detect ELPs with a variety of aliphatic guest residues. ELPs phase-separate in response to heating; furthermore, when incubated at a great excess of ELPs, the anti-ELP mAb partially blocks phase separation. These findings are direct evidence that novel murine mAbs can be raised against purified ELPs. This new reagent will enable purification, experimental detection, and characterization of these biopolymers.

Coarse-grained model of tropoelastin self-assembly into nascent fibrils

Elastin is the dominant building block of elastic fibers that impart structural integrity and elasticity to a range of important tissues, including the lungs, blood vessels, and skin. The elastic fiber assembly process begins with a coacervation stage where tropoelastin monomers reversibly self-assemble into coacervate aggregates that consist of multiple molecules. In this paper, an atomistically based coarse-grained model of tropoelastin assembly is developed. Using the previously determined atomistic structure of tropoelastin, the precursor molecule to elastic fibers, as the basis for coarse-graining, the atomistic model is mapped to a MARTINI-based coarse-grained framework to account for chemical details of protein-protein interactions, coupled to an elastic network model to stabilize the structure. We find that self-assembly of monomers generates up to ∼70 ​nm of dense aggregates that are distinct at different temperatures, displaying high temperature sensitivity. Resulting assembled structures exhibit a combination of fibrillar and globular substructures within the bulk aggregates. The results suggest that the coalescence of tropoelastin assemblies into higher order structures may be reinforced in the initial stages of coacervation by directed assembly, supporting the experimentally observed presence of heterogeneous cross-linking. Self-assembly of tropoelastin is driven by interactions of specific hydrophobic domains and the reordering of water molecules in the system. Domain pair orientation analysis throughout the self-assembly process at different temperatures suggests coacervation is a driving force to orient domains for heterogeneous downstream cross-linking. The model provides a framework to characterize macromolecular self-assembly for elastin, and the formulation could easily be adapted to similar assembly systems.

Polymers, responsiveness and cancer therapy

A single outcome in a biological procedure at the time of cancer therapy is due to multiple changes happening simultaneously. Hence to mimic such complex biological processes, an understanding of stimuli responsiveness is needed to sense specific changes and respond in a predictable manner. Such responses due to polymers may take place either simultaneously at the site or in a sequential manner from preparation to transporting pathways to cellular compartments. The present review comprehends the stimuli-responsive polymers and multi-responsiveness with respect to cancer therapy. It focuses on the exploitation of different stimuli like temperature, pH and enzymes responsiveness in a multi-stimuli setting. Nanogels and micelles being two of the most commonly used responsive polymeric carriers have also been discussed. The role of multiple stimuli delivery system is significant due to multiple changes happening in the near surroundings of cancer cells. These responsive materials are able to mimic some biological processes and recognize at the molecular level itself to manipulate development of custom-designed molecules for targeting cancer cells.

Calcium-Dependent RTX Domains in the Development of Protein Hydrogels

The RTX domains found in some pathogenic proteins encode repetitive peptide sequences that reversibly bind calcium and fold into the unique the β-roll secondary structure. Several of these domains have been studied in isolation, yielding key insights into their structure/function relationships. These domains are increasingly being used in protein engineering applications, where the calcium-induced control over structure can be exploited to gain new functions. Here we review recent advances in the use of RTX domains in the creation of calcium responsive biomaterials.

Generation of induced pluripotent stem cells using elastin like polypeptides as a non-viral gene delivery system

Induced pluripotent stem cells (iPSCs) have been generated from various somatic cells using different approaches; however, a major restriction of reprogramming methods is the use of viral vectors, which have the risk of causing genome-integration of viral DNA. Here, without a viral vector, we generated iPSCs from mouse fibroblasts using an elastin-like polypeptide (ELP)-based transfection method. Our findings support the possible use of ELPs for delivery of the reprogramming genes in to somatic cells for generation of iPSCs. Results of gel retardation assay demonstrated efficient complexation of ELPs with a plasmid containing the four Yamanaka stem cell factors, Oct-4, Klf4, c-myc, and Sox2. After transfection, the iPSCs showed embryonic stem cell-like characteristics, including expression of endogenous pluripotency genes, differentiation into three germ layer lineages, and formation of teratomas in vivo. Our results demonstrate that ELP-based gene delivery may provide a safe method for use in generation of virus-free and exogenous DNA-free iPSCs, which will be crucial for future applications in stem cell-based therapies.

Polymer size affects biodistribution and placental accumulation of the drug delivery biopolymer elastin-like polypeptide in a rodent pregnancy model

INTRODUCTION

Fusion of therapeutic agents to Elastin-like Polypeptide (ELP) is a novel drug delivery strategy for prevention of placental drug transfer. Previous studies have used a 60 kDa ELP tag for this purpose. However, placental transfer of ELP may be size dependent. The goal of this study was to measure the effects of ELP polymer size on pharmacokinetics, biodistribution, and placental transfer of ELP.

METHODS

Three ELPs ranging from 25 to 86 kDa (4.1-6.8 nm hydrodynamic radius) were fluorescently labeled and administered by i.v. bolus to pregnant Sprague Dawley rats on gestational day 14. Plasma levels were monitored for 4 h, organ levels and placental transfer determined by ex vivo fluorescence imaging, and placental localization determined by confocal microscopy.

RESULTS

Increasing ELP size resulted in slower plasma clearance and increased deposition in all major maternal organs, except in the kidneys where an opposite effect was observed. Placental levels increased with an increase in size, while in the pups, little to no ELP was detected.

DISCUSSION

Pharmacokinetics and biodistribution of ELPs during pregnancy are size dependent, but all ELPs tested were too large to traverse the placental barrier. These studies verify that ELP fusion is a powerful method of modulating half-life and preventing placental transfer of cargo molecules. The tunable nature of the ELP sequence makes it ideal for drug delivery applications during pregnancy, where it can be used to target drugs to the mother while preventing fetal drug exposure.

Two Engineered OBPs with opposite temperature-dependent affinities towards 1-aminoanthracene

Engineered odorant-binding proteins (OBPs) display tunable binding affinities triggered by temperature alterations. We designed and produced two engineered proteins based on OBP-I sequence: truncated OBP (tOBP) and OBP::GQ20::SP-DS3. The binding affinity of 1-aminoanthracene (1-AMA) to these proteins revealed that tOBP presents higher affinity at 25 °C (kd = 0.45 μM) than at 37 °C (kd = 1.72 μM). OBP::GQ20::SP-DS3 showed an opposite behavior, revealing higher affinity at 37 °C (kd = 0.58 μM) than at 25 °C (kd = 1.17 μM). We set-up a system containing both proteins to evaluate their temperature-dependent binding. Our data proved the 1-AMA differential and reversible affinity towards OBPs, triggered by temperature changes. The variations of the binding pocket size with temperature, confirmed by molecular modelling studies, were determinant for the differential binding of the engineered OBPs. Herein we described for the first time a competitive temperature-dependent mechanism for this class of proteins.

Effects of Doxorubicin on the Liquid-Liquid Phase Change Properties of Elastin-Like Polypeptides

The lower critical solution temperature (LCST) of the thermo-responsive engineered elastin-like polypeptide (ELP) biopolymer is being exploited for the thermal targeted delivery of doxorubicin (Dox) to solid tumors. We examine the impact of Dox labeling on the thermodynamic and hydrodynamic behavior of an ELP drug carrier and how Dox influences the liquid-liquid phase separation (LLPS). Turbidity, dynamic light scattering (DLS), and differential scanning calorimetry measurements show that ELP undergoes a cooperative liquid-liquid phase separation from a soluble to insoluble coacervated state that is enhanced by Dox labeling. Circular dichroism measurements show that below the LCST ELP consists of both random coils and temperature-dependent β-turn structures. Labeling with Dox further enhances β-turn formation. DLS measurements reveal a significant increase in the hydrodynamic radius of ELP below the LCST consistent with weak self-association. Dox-labeled SynB1-ELP1 (Dox-ELP) has a significant increase in the hydrodynamic radius by DLS measurements that is consistent with stable oligomers and, at high Dox-ELP concentrations, micelle structures. Enhanced association by Dox-ELP is confirmed by sedimentation velocity analytical ultracentrifugation measurements. Both ELP self-association and the ELP inverse phase transition are entropically driven with positive changes in enthalpy and entropy. We show by turbidity and DLS that the ELP phase transition is monophasic, whereas mixtures of ELP and Dox-ELP are biphasic, with Dox-labeled ELP phase changing first and unlabeled ELP partitioning into the coacervate as the temperature is raised. DLS reveals a complex growth in droplet sizes consistent with coalescence and fusion of liquid droplets. Differential scanning calorimetry measurements show a -11 kcal/mol change in enthalpy for Dox-ELP coacervation relative to the unlabeled ELP, consistent with droplet formation being stabilized by favorable enthalpic interactions. We propose that the ELP phase change is initiated by ELP self-association, enhanced by increased Dox-ELP oligomer and micelle formation and stabilized by favorable enthalpic interactions in the liquid droplets.

Conjugation of Amphiphilic Proteins to Hydrophobic Ligands in Organic Solvent

Protein-ligand conjugations are usually carried out in aqueous media in order to mimic the environment within which the conjugates will be used. In this work, we focus on the conjugation of amphiphilic variants of elastin-like polypeptide (ELP), short elastin (sEL), to poorly water-soluble compounds like OPPVs ( p-phenylenevinylene oligomers), triarylamines, and polypyridine-metal complexes. These conjugations are problematic when carried out in aqueous phase because hydrophobic ligands tend to avoid exposure to water, which in turn causes the ligand to self-aggregate and/or interact noncovalently with hydrophobic regions of the amphiphile. Ultimately, this behavior leads to low conjugation efficiency and contamination with strong noncovalent "conjugates". After exploring the solubility of sEL in various organic solvents, we have established an efficient conjugation methodology for obtaining covalent conjugates virtually free of contaminating noncovalent complexes. When conjugating carboxylated ligands to the amphiphile amines, we demonstrate that even when only one amine (the N-terminus) is present, its derivatization is 98% efficient. When conjugating amine moieties to the amphiphile carboxyls (a problematic configuration), protein multimerization is avoided, 98-100% of the protein is conjugated, and the unreacted ligand is recovered in pure form. Our syntheses occur in "one pot", and our purification procedure is a simple workup utilizing a combination of water and organic solvent extractions. This conjugation methodology might provide a solution to problems arising from solubility mismatch of protein and ligand, and it is likely to be widely applied for modification of recombinant amphiphiles used for drug delivery (PEG-antibodies, polymer-enzymes, food proteins), cell adhesion (collagen, hydrophobins), synthesis of nanostructures (peptides), and engineering of biocompatible optoelectronics (biological polymers), to cite a few.

A new temperature-dependent strategy to modulate the epidermal growth factor receptor

The dynamic manipulation of kinases remains a major obstacle to unraveling cell-signaling networks responsible for the activation of biological systems. For example, epidermal growth factor (EGF) stimulates the epidermal growth factor receptor (EGFR/ErbB1); however, EGF also recruits other kinases (HER2/ErbB2) involved with various signaling pathways. To better study EGFR we report a new strategy to selectively activate receptor tyrosine kinases fused to elastin-like polypeptides (ELPs), which can be visualized inside mammalian cells using fixed and live-cell fluorescence microscopy. ELPs are high molecular weight polypeptides that phase separate abruptly upon heating. When an EGFR-ELP fusion is heated, it clusters, initiates receptor internalization, phosphorylates, initiates downstream kinase signaling, and undergoes retrograde transport towards the cell body. Unlike other strategies to block EGFR (small molecule inhibitors, RNAi, or transcriptional regulators), EGFR-ELP clustering can be specifically switched on or off within minutes. Live-cell imaging suggests that EGFR-ELPs assemble in most cells with only a 3 °C increase in temperature. This strategy was found reversible and able to dynamically control the downstream phosphorylation/activation of the ERK1/2 pathway. For the first time, this strategy enables the rational engineering of specific temperature-sensitive receptors that may have broad applications in the study and manipulation of biological processes.

Dimeric camptothecin-loaded RGD-modified targeted cationic polypeptide-based micelles with high drug loading capacity and redox-responsive drug release capability

Camptothecin (CPT) is a broad spectrum anticancer drug, but its application is limited due to the poor water solubility, lactone ring instability, and low drug loading potential. In this study, biocompatible cationic polypeptide-based micelles were developed to deliver dimeric CPT (DCPT) with the aim of overcoming the above-mentioned obstacles and achieving favorable therapeutic effects. Cationic polypeptide poly-lysine-block-poly-leucine (PLys-b-PLeu) was fabricated via the ring-opening polymerization of N-ε-carbobenzoxy-l-lysine (ε-Lys(Z)) and l-leucine (Leu) and further grafted with polyethylene glycol (PEG) and an arginine-glycine-aspartic acid (RGD) peptide. DCPT was synthesized by reacting CPT and 2-hydroxyethyl disulfide, and micelles were prepared using a dialysis method. The obtained DCPT-loaded RGD-PEG-g-poly-l-lysine-b-poly-l-leucine (DRPPP) micelles showed a high encapsulation efficiency of 89.7% and a high drug loading capacity of 46.1%. In addition, the DRPPP micelles remained stable under physiological conditions (PBS at a pH of 7.4) but showed rapid release when triggered by a reductive environment (PBS at a pH of 7.4 with 10 mM dithiothreitol). Compared to micelles without RGD decoration, the DRPPP micelles exhibited an increased cellular uptake through RGD targeting and were internalized into cells via caveolae-mediated endocytosis and macropinocytosis. Furthermore, the DRPPP micelles exerted an enhanced cytotoxicity against MDA-MB-231 cells compared to MCF-7 cells, which expressed less α_vβ₃ receptors. Besides, the DRPPP micelles induced cell apoptosis and caused a decrease of mitochondrial membrane potential. These results indicate that dimeric camptothecin-loaded cationic polypeptide-based micelle is a promising strategy for cancer therapy.

The solvent side of proteinaceous membrane-less organelles in light of aqueous two-phase systems

Water represents a common denominator for liquid-liquid phase transitions leading to the formation of the polymer-based aqueous two-phase systems (ATPSs) and a set of the proteinaceous membrane-less organelles (PMLOs). ATPSs have a broad range of biotechnological applications, whereas PMLOs play a number of crucial roles in cellular compartmentalization and often represent a cellular response to the stress. Since ATPSs and PMLOs contain high concentrations of polymers (such as polyethylene glycol (PEG), polypropylene glycol (PPG), Ucon, and polyvinylpyrrolidone (PVP), Dextran, or Ficoll) or biopolymers (peptides, proteins and nucleic acids), it is expected that the separated phases of these systems are characterized by the noticeable changes in the solvent properties of water. These changes in solvent properties can drive partitioning of various compounds (proteins, nucleic acids, organic low-molecular weight molecules, metal ions, etc.) between the phases of ATPSs or between the PMLOs and their surroundings. Although there is a sizable literature on the properties of the ATPS phases, much less is currently known about PMLOs. In this perspective article, we first represent liquid-liquid phase transitions in water, discuss different types of biphasic (or multiphasic) systems in water, and introduce various PMLOs and some of their properties. Then, some basic characteristics of polymer-based ATPSs are presented, with the major focus being on the current understanding of various properties of ATPS phases and solvent properties of water inside them. Finally, similarities and differences between the polymer-based ATPSs and biological PMLOs are discussed.

Peptide and protein nanoparticle conjugates: versatile platforms for biomedical applications

Peptide- and protein-nanoparticle conjugates have emerged as powerful tools for biomedical applications, enabling the treatment, diagnosis, and prevention of disease. In this review, we focus on the key roles played by peptides and proteins in improving, controlling, and defining the performance of nanotechnologies. Within this framework, we provide a comprehensive overview of the key sequences and structures utilised to provide biological and physical stability to nano-constructs, direct particles to their target and influence their cellular and tissue distribution, induce and control biological responses, and form polypeptide self-assembled nanoparticles. In doing so, we highlight the great advances made by the field, as well as the challenges still faced in achieving the clinical translation of peptide- and protein-functionalised nano-drug delivery vehicles, imaging species, and active therapeutics.

Molecular Size Modulates Pharmacokinetics, Biodistribution, and Renal Deposition of the Drug Delivery Biopolymer Elastin-like Polypeptide

Elastin-like polypeptides (ELP) are engineered proteins that consist of repetitions of a five amino acid motif, and their composition is easily modified to adjust their physical properties and attach therapeutics. Because of the repetitive nature of the ELP sequence, polymer size is particularly amenable to manipulation. ELP fusion proteins are being actively developed as therapeutics for many disease applications, and how the ELP size and shape affects its pharmacokinetics and biodistribution is a critical question for the general field of ELP drug delivery. To address this, we generated a library of ELPs ranging in size from 25 kDa to 110 kDa. Terminal plasma half-life was directly proportional to polymer size, and organ biodistribution was also size dependent. The kidneys accumulated the highest levels of ELP of all sizes, followed by the liver. Within the kidney, most ELP was found in the proximal tubule, but intra-renal localization shifted from exclusively cortical to a mixture of cortical and medullary as ELP size increased.

Genetically encoded lipid-polypeptide hybrid biomaterials that exhibit temperature-triggered hierarchical self-assembly

Post-translational modification of proteins is a strategy widely used in biological systems. It expands the diversity of the proteome and allows for tailoring of both the function and localization of proteins within cells as well as the material properties of structural proteins and matrices. Despite their ubiquity in biology, with a few exceptions, the potential of post-translational modifications in biomaterials synthesis has remained largely untapped. As a proof of concept to demonstrate the feasibility of creating a genetically encoded biohybrid material through post-translational modification, we report here the generation of a family of three stimulus-responsive hybrid materials-fatty-acid-modified elastin-like polypeptides-using a one-pot recombinant expression and post-translational lipidation methodology. These hybrid biomaterials contain an amphiphilic domain, composed of a β-sheet-forming peptide that is post-translationally functionalized with a C14 alkyl chain, fused to a thermally responsive elastin-like polypeptide. They exhibit temperature-triggered hierarchical self-assembly across multiple length scales with varied structure and material properties that can be controlled at the sequence level.

Convergence of Artificial Protein Polymers and Intrinsically Disordered Proteins

A flurry of research in recent years has revealed the molecular origins of many membraneless organelles to be the liquid phase separation of intrinsically disordered proteins (IDPs). Consequently, protein disorder has emerged as an important driver of intracellular compartmentalization by providing specialized microenvironments chemically distinct from the surrounding medium. Though the importance of protein disorder and its relationship to intracellular phase behavior are clear, a detailed understanding of how such phase behavior can be predicted and controlled remains elusive. While research in IDPs has largely focused on the implications of structural disorder on cellular function and disease, another field, that of artificial protein polymers, has focused on the de novo design of protein polymers with controllable material properties. A subset of these polymers, specifically those derived from structural proteins such as elastin and resilin, are also disordered sequences that undergo liquid-liquid phase separation. This phase separation has been used in a variety of biomedical applications, and researchers studying these polymers have developed methods to precisely characterize and tune their phase behavior. Despite their disparate origins, both fields are complementary as they study the phase behavior of intrinsically disordered polypeptides. This Perspective hopes to stimulate collaborative efforts by highlighting the similarities between these two fields and by providing examples of how such collaboration could be mutually beneficial.

Transiently thermoresponsive polymers and their applications in biomedicine

The focus of this review is on the class of transiently thermoresponsive polymers. These polymers are thermoresponsive, but gradually lose this property upon chemical transformation - often a hydrolysis reaction - in the polymer side chain or backbone. An overview of the different approaches used for the design of these polymers along with their physicochemical properties is given. Their amphiphilic properties and degradability into fully soluble compounds make this class of responsive polymers attractive for drug delivery and tissue engineering applications. Examples of these are also provided in this review.

Modeling the Early Stages of Phase Separation in Disordered Elastin-like Proteins

Elastin-like proteins (ELPs) are known to undergo liquid-liquid phase separation reversibly above a concentration-dependent transition temperature. Previous studies suggested that, as temperature increases, ELPs experience an increased propensity for type II β-turns. However, how the ELPs behave below the phase transition temperature itself is still elusive. Here, we investigate the importance of β-turn formation during the early stages of ELP self-association. We examined the behavior of two ELPs, a 150-repeat construct that had been investigated previously (ELP[V5G3A2-150] as well as a new 40-repeat construct (ELP40) suitable for nuclear magnetic resonance measurements. Structural analysis of ELP40 reveals a disordered conformation, and chemical shifts throughout the sequence are insensitive to changes in temperature over 20°C. However, a low population of β-turn conformation cannot be ruled out based on chemical shifts alone. To examine the structural consequences of β-turns in ELPs, a series of structural ensembles of ELP[V5G3A2-150] were generated, incorporating differing amounts of β-turn bias throughout the chain. To mimic the early stages of the phase change, two monomers were paired, assuming preferential interaction at β-turn regions. This approach was justified by the observation that buried hydrophobic turns are commonly observed to interact in the Protein Data Bank. After dimerization, the ensemble-averaged hydrodynamic properties were calculated for each degree of β-turn bias, and the results were compared with analytical ultracentrifugation experiments at various temperatures. We find that the temperature dependence of the sedimentation coefficient (s20,wo) can be reproduced by increasing the β-turn content in the structural ensemble. This analysis allows us to estimate the presence of β-turns and weak associations under experimental conditions. Because disordered proteins frequently exhibit weak biases in secondary structure propensity, these experimentally-driven ensemble calculations may complement existing methods for modeling disordered proteins generally.

Bioactive scaffolds based on elastin-like materials for wound healing

Wound healing is a complex process that, in healthy tissues, starts immediately after the injury. Even though it is a natural well-orchestrated process, large trauma wounds, or injuries caused by acids or other chemicals, usually produce a non-elastic deformed tissue that not only have biological reduced properties but a clear aesthetic effect. One of the main drawbacks of the scaffolds used for wound dressing is the lack of elasticity, driving to non-elastic and contracted tissues. In the last decades, elastin based materials have gained in importance as biomaterials for tissue engineering applications due to their good cyto- and bio-compatibility, their ease handling and design, production and modification. Synthetic elastin or elastin like-peptides (ELPs) are the two main families of biomaterials that try to mimic the outstanding properties of natural elastin, elasticity amongst others; although there are no in vivo studies that clearly support that these two families of elastin based materials improve the elasticity of the artificial scaffolds and of the regenerated skin. Within the next pages a review of the different forms (coacervates, fibres, hydrogels and biofunctionalized surfaces) in which these two families of biomaterials can be processed to be applied in the wound healing field have been done. Here, we explore the mechanical and biological properties of these scaffolds as well as the different in vivo approaches in which these scaffolds have been used.

Functional Modification of Silica through Enhanced Adsorption of Elastin-Like Polypeptide Block Copolymers

A powerful tool for controlling interfacial properties and molecular architecture relies on the tailored adsorption of stimuli-responsive block copolymers onto surfaces. Here, we use computational and experimental approaches to investigate the adsorption behavior of thermally responsive polypeptide block copolymers (elastin-like polypeptides, ELPs) onto silica surfaces, and to explore the effects of surface affinity and micellization on the adsorption kinetics and the resultant polypeptide layers. We demonstrate that genetic incorporation of a silica-binding peptide (silaffin R5) results in enhanced adsorption of these block copolymers onto silica surfaces as measured by quartz crystal microbalance and ellipsometry. We find that the silaffin peptide can also direct micelle adsorption, leading to close-packed micellar arrangements that are distinct from the sparse, patchy arrangements observed for ELP micelles lacking a silaffin tag, as evidenced by atomic force microscopy measurements. These experimental findings are consistent with results of dissipative particle dynamics simulations. Wettability measurements suggest that surface immobilization hampers the temperature-dependent conformational change of ELP micelles, while adsorbed ELP unimers (i.e., unmicellized block copolymers) retain their thermally responsive property at interfaces. These observations provide guidance on the use of ELP block copolymers as building blocks for fabricating smart surfaces and interfaces with programmable architecture and functionality.