Poly(alkylcyanoacrylates) as biodegradable materials for biomedical applications

Quantitative Phase Imaging as Sensitive Screening Method for Nanoparticle-Induced Cytotoxicity Assessment

The assessment of nanoparticle cytotoxicity is challenging due to the lack of customized and standardized guidelines for nanoparticle testing. Nanoparticles, with their unique properties, can interfere with biochemical test methods, so multiple tests are required to fully assess their cellular effects. For a more reliable and comprehensive assessment, it is therefore imperative to include methods in nanoparticle testing routines that are not affected by particles and allow for the efficient integration of additional molecular techniques into the workflow. Digital holographic microscopy (DHM), an interferometric variant of quantitative phase imaging (QPI), has been demonstrated as a promising method for the label-free assessment of the cytotoxic potential of nanoparticles. Due to minimal interactions with the sample, DHM allows for further downstream analyses. In this study, we investigated the capabilities of DHM in a multimodal approach to assess cytotoxicity by directly comparing DHM-detected effects on the same cell population with two downstream biochemical assays. Therefore, the dry mass increase in RAW 264.7 macrophages and NIH-3T3 fibroblast populations measured by quantitative DHM phase contrast after incubation with poly(alkyl cyanoacrylate) nanoparticles for 24 h was compared to the cytotoxic control digitonin, and cell culture medium control. Viability was then determined using a metabolic activity assay (WST-8). Moreover, to determine cell death, supernatants were analyzed for the release of the enzyme lactate dehydrogenase (LDH assay). In a comparative analysis, in which the average half-maximal effective concentration (EC50) of the nanocarriers on the cells was determined, DHM was more sensitive to the effect of the nanoparticles on the used cell lines compared to the biochemical assays.

Robust aortic media adhesion using hydrophobically modified Alaska pollock gelatin-based adhesive for aortic dissections

Type-A aortic dissection is an acute injury involving the delamination of the aorta at the parts of the aortic media. Aldehyde crosslinker-containing glues have been used to adhere to the media of the dissected aorta before joining an artificial graft. These glues effectively adhere to the aortic media; however, they show low biocompatibility due to the release of aldehyde compounds. In this study, we report innovative adhesives based on hydrophobically modified Alaska pollock gelatin (hm-ApGltn) with different alkyl or cholesteryl (Chol) groups that adhere to the media of the dissected aorta by combining hm-ApGltns with a biocompatible crosslinker, pentaerythritol poly(ethylene glycol) ether tetrasuccinimidyl glutarate. The modification of alkyl or Chol groups contributed to enhanced adhesion strength between porcine aortic media. The adhesion strength increased with increasing modification ratios of alkyl groups from propanoyl to dodecanoyl groups and then decreased at a modification ratio of ~20 mol %. Porcine aortic media adhered using 7.5Chol-ApGltn adhesive showed stretchability even when expanded and shrunk vertically by 25% at least five times. Hm-ApGltn adhesives subcutaneously injected into the backs of mice showed no severe inflammation and were degraded during the implantation period. These results indicated that hm-ApGltn adhesives have potential applications in type-A aortic dissection.

Novel Biomaterials Based Strategies for Neurodegeneration: Recent Advancements and Future Prospects

Neurodegenerative diseases, including Alzheimer's disease, Parkinson's disease, and Huntington's disease, pose significant challenges for effective treatment due to the complex nature of the central nervous system and the limited delivery of therapeutic agents to the brain. Biomaterial-based drug delivery systems offer promising strategies to overcome these challenges and improve therapeutic outcomes. These systems utilize various biomaterials, such as nanoparticles, hydrogels, and implants, to deliver drugs, genes, or cells to the affected regions of the brain. They provide advantages such as targeted delivery, controlled release, and protection of therapeutic agents. This review examines the role of biomaterials in drug delivery for neurodegeneration, discussing different biomaterialbased approaches, including surface modification, encapsulation, and functionalization techniques. Furthermore, it explores the challenges, future perspectives, and potential impact of biomaterialbased drug delivery systems in the field of neurodegenerative diseases.

In Vitro Efficacy of Isobutyl Cyanoacrylate Nanoparticles against Fish Bacterial Pathogens and Selection Preference by Rainbow Trout (Oncorhynchus mykiss)

The upsurge in havoc being wreaked by antibiotic-resistant bacteria has led to an urgent need for efficacious alternatives to antibiotics. This study assessed the antibacterial efficacy of two isobutyl cyanoacrylate nanoparticles (iBCA-NPs), D6O and NP30, against major bacterial pathogens of fish. In vivo tests on rainbow trout were preceded by in vitro tests of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). NP30 exhibited higher efficacy than D60, but both iBCA-NPs demonstrated dose-dependent and species-specific in vitro antibacterial properties against the bacterial isolates. Generally, Gram-negative bacteria were more resistant to the iBCA-NPs. Streptococcus iniae, Tenacibaculum maritimum, and Photobacterium damselae were particularly sensitive to both iBCA-NPs. Administered to rainbow trout at 3571.4 mg (iBCA-NP)/kg feed, the iBCA-NPs produced a relative gain rate and survival rates comparable to the control (p > 0.05). The condition factor and the hepatosomatic and viscerosomatic indices of fish were indifferentiable (p > 0.05) between the iBCA-NP groups and the control. The iBCA-NPs caused no alteration in stress, oxidative stress (superoxide dismutase, SOD), plasma complement titer, or lysozyme activity. This study presents the first report of antibacterial activity of iBCA-NPs against Gram-negative bacteria. The results of this study suggest that D60 and NP30 may contribute to reducing the amounts of antibiotics and chemotherapeutic agents used in aquaculture.

Closed-loop recyclable plastics from poly(ethyl cyanoacrylate)

Ethyl cyanoacrylate is a highly reactive monomer that has been used nearly exclusively to make Super Glue and related fast-setting adhesives. Here, we describe transformation of this highly abundant, readily available monomer into a closed-loop recyclable plastic that could supplant currently used (and often unrecycled/unrecyclable) plastics, such as poly(styrene). We report polymerization conditions, plastic-processing methods, and plastic-recycling protocols for poly(ethyl cyanoacrylate) plastics that make the Super Glue monomer a viable starting material for a next generation of closed-loop recyclable plastics. The processes described are scalable, and the plastics can be recycled in a closed-loop process with >90% yields, even when combined with a heterogeneous mixture of other types of plastic.

Multifunctional Dual Cross-Linked Bioadhesive Patch with Low Immunogenic Response and Wet Tissues Adhesion

The development of bioadhesives is an important, yet challenging task as seemingly mutually exclusive properties need to be combined in one material, that is, strong adhesion, water resistance, and high biocompatibility. Here, a biocompatible and biodegradable protein-based bioadhesive patch (PBP) with high adhesion strength and low immunogenic response is reported. PBP exists as a strong adhesion for biological surfaces, which is higher than some conventional bioadhesives (i.e., polyethylene glycol and fibrin). Robust adhesion and strength are realized through the removal of interfacial water and fast formation of multiple supramolecular interactions induced by metal ions. The PBP's high biocompatibility is evaluated and immunogenic response in vitro and in vivo is neglected. The strong adhesion on soft biological tissues qualifies the PBP as biomedical glue outperforming some commercial products for applications in hemostasis performance, accelerated wound healing, and sealing of defected organs, anticipating to be useful as a tissue adhesive and sealant.

Degradable polyisoprene by radical ring-opening polymerization and application to polymer prodrug nanoparticles

Radical ring-opening copolymerization of isoprene and dibenzo[c,e]oxepane-5-thione via free-radical and controlled radical polymerizations led to degradable polyisoprene under basic, oxidative and physiological conditions with application to prodrug nanoparticles.

Novel Development of Nanoparticles-A Promising Direction for Precise Tumor Management

Although the clinical application of nanoparticles is still limited by biological barriers and distribution, with the deepening of our understanding of nanoparticles over the past decades, people are gradually breaking through the previous limitations in the diagnosis and treatment of tumors, providing novel strategies for clinical decision makers. The transition of nanoparticles from passive targeting to active tumor-targeting by abundant surface-modified nanoparticles is also a development process of precision cancer treatment. Different particles can be used as targeted delivery tools of antitumor drugs. The mechanism of gold nanoparticles inducing apoptosis and cycle arrest of tumor cells has been discovered. Moreover, the unique photothermal effect of gold nanoparticles may be widely used in tumor therapy in the future, with less side effects on surrounding tissues. Lipid-based nanoparticles are expected to overcome the blood-brain barrier due to their special characteristics, while polymer-based nanoparticles show better biocompatibility and lower toxicity. In this paper, we discuss the development of nanoparticles in tumor therapy and the challenges that need to be addressed.

Polyanhydride Chemistry

Polyanhydrides (PAs) are a class of synthetic biodegradable polymers employed as controlled drug delivery vehicles. They can be synthesized and scaled up from low-cost starting materials. The structure of PAs can be manipulated synthetically to meet desirable characteristics. PAs are biocompatible, biodegradable, and generate nontoxic metabolites upon degradation, which are easily eliminated from the body. The rate of water penetrating into the polyanhydride (PA) matrix is slower than the anhydride bond cleavage. This phenomenon sets PAs as "surface-eroding drug delivery carriers." Consequently, a variety of PA-based drug delivery carriers in the form of solid implants, pasty injectable formulations, microspheres, nanoparticles, etc. have been developed for the sustained release of small molecule drugs, and vaccines, peptide drugs, and nucleic acid-based active agents. The rate of drug delivery is often controlled by the polymer erosion rate, which is influenced by the polymer structure and composition, crystallinity, hydrophobicity, pH of the release medium, device size, configuration, etc. Owing to the above-mentioned interesting physicochemical and mechanical properties of PAs, the present review focuses on the advancements made in the domain of synthetic biodegradable biomedical PAs for therapeutic delivery applications. Various classes of PAs, their structures, their unique characteristics, their physicochemical and mechanical properties, and factors influencing surface erosion are discussed in detail. The review also summarizes various methods involved in the synthesis of PAs and their utility in the biomedical domain as drug, vaccine, and peptide delivery carriers in different formulations are reviewed.

Application of nanomaterials in diagnosis and treatment of glioblastoma

Diagnosing and treating glioblastoma patients is currently hindered by several obstacles, such as tumor heterogeneity, the blood-brain barrier, tumor complexity, drug efflux pumps, and tumor immune escape mechanisms. Combining multiple methods can increase benefits against these challenges. For example, nanomaterials can improve the curative effect of glioblastoma treatments, and the synergistic combination of different drugs can markedly reduce their side effects. In this review, we discuss the progression and main issues regarding glioblastoma diagnosis and treatment, the classification of nanomaterials, and the delivery mechanisms of nanomedicines. We also examine tumor targeting and promising nano-diagnosis or treatment principles based on nanomedicine. We also summarize the progress made on the advanced application of combined nanomaterial-based diagnosis and treatment tools and discuss their clinical prospects. This review aims to provide a better understanding of nano-drug combinations, nano-diagnosis, and treatment options for glioblastoma, as well as insights for developing new tools.

Evaluation of the Growth-Inhibitory Spectrum of Three Types of Cyanoacrylate Nanoparticles on Gram-Positive and Gram-Negative Bacteria

The development of novel effective antibacterial agents is crucial due to increasing antibiotic resistance in various bacteria. Poly (alkyl cyanoacrylate) nanoparticles (PACA-NPs) are promising novel antibacterial agents as they have shown antibacterial activity against several Gram-positive and Gram-negative bacteria. However, the antibacterial mechanism remains unclear. Here, we compared the antibacterial efficacy of ethyl cyanoacrylate nanoparticles (ECA-NPs), isobutyl cyanoacrylate NPs (ⁱBCA-NPs), and ethoxyethyl cyanoacrylate NPs (EECA-NPs) using five Gram-positive and five Gram-negative bacteria. Among these resin nanoparticles, ECA-NPs showed the highest growth inhibitory effect against all the examined bacterial species, and this effect was higher against Gram-positive bacteria than Gram-negative. While ⁱBCA-NP could inhibit the cell growth only in two Gram-positive bacteria, i.e., Bacillus subtilis and Staphylococcus aureus, it had negligible inhibitory effect against all five Gram-negative bacteria examined. Irrespective of the differences in growth inhibition induced by these three NPs, N-acetyl-L-cysteine (NAC), a well-known reactive oxygen species (ROS) scavenger, efficiently restored growth in all the bacterial strains to that similar to untreated cells. This strongly suggests that the exposure to NPs generates ROS, which mainly induces cell growth inhibition irrespective of the difference in bacterial species and cyanoacrylate NPs used.

Polymeric Nanoparticles in Brain Cancer Therapy: A Review of Current Approaches

Translation of novel therapies for brain cancer into clinical practice is of the utmost importance as primary brain tumors are responsible for more than 200,000 deaths worldwide each year. While many research efforts have been aimed at improving survival rates over the years, prognosis for patients with glioblastoma and other primary brain tumors remains poor. Safely delivering chemotherapeutic drugs and other anti-cancer compounds across the blood-brain barrier and directly to tumor cells is perhaps the greatest challenge in treating brain cancer. Polymeric nanoparticles (NPs) are powerful, highly tunable carrier systems that may be able to overcome those obstacles. Several studies have shown appropriately-constructed polymeric NPs cross the blood-brain barrier, increase drug bioavailability, reduce systemic toxicity, and selectively target central nervous system cancer cells. While no studies relating to their use in treating brain cancer are in clinical trials, there is mounting preclinical evidence that polymeric NPs could be beneficial for brain tumor therapy. This review includes a variety of polymeric NPs and how their associated composition, surface modifications, and method of delivery impact their capacity to improve brain tumor therapy.

Interlaboratory evaluation of a digital holographic microscopy-based assay for label-free in vitro cytotoxicity testing of polymeric nanocarriers

State-of-the-art in vitro test systems for nanomaterial toxicity assessment are based on dyes and several staining steps which can be affected by nanomaterial interference. Digital holographic microscopy (DHM), an interferometry-based variant of quantitative phase imaging (QPI), facilitates reliable proliferation quantification of native cell populations and the extraction of morphological features in a fast and label- and interference-free manner by biophysical parameters. DHM therefore has been identified as versatile tool for cytotoxicity testing in biomedical nanotechnology. In a comparative study performed at two collaborating laboratories, we investigated the interlaboratory variability and performance of DHM in nanomaterial toxicity testing, utilizing complementary standard operating procedures (SOPs). Two identical custom-built off-axis DHM systems, developed for usage in biomedical laboratories, equipped with stage-top incubation chambers were applied at different locations in Europe. Temporal dry mass development, 12-h dry mass increments and morphology changes of A549 human lung epithelial cell populations upon incubation with two variants of poly(alkyl cyanoacrylate) (PACA) nanoparticles were observed in comparison to digitonin and cell culture medium controls. Digitonin as cytotoxicity control, as well as empty and cabazitaxel-loaded PACA nanocarriers, similarly impacted 12-h dry mass development and increments as well as morphology of A549 cells at both participating laboratories. The obtained DHM data reflected the cytotoxic potential of the tested nanomaterials and are in agreement with corresponding literature on biophysical and chemical assays. Our results confirm DHM as label-free cytotoxicity assay for polymeric nanocarriers as well as the repeatability and reproducibility of the technology. In summary, the evaluated DHM assay could be efficiently implemented at different locations and facilitates interlaboratory in vitro toxicity testing of nanoparticles with prospects for application in regulatory science.

Evaluating nanobiomaterial-induced DNA strand breaks using the alkaline comet assay

Due to their unique chemical and physical properties, nanobiomaterials (NBMs) are extensively studied for applications in medicine and drug delivery. Despite these exciting properties, their small sizes also make them susceptible to toxicity. Whilst nanomaterial immunotoxicity and cytotoxicity are studied in great depth, there is still limited data on their potential genotoxicity or ability to cause DNA damage. In the past years, new medical device regulations, which came into place in 2020, were developed, which require the assessment of long-term NBM exposure; therefore, in recent years, increased attention is being paid to genotoxicity screening of these materials. In this article, and through an interlaboratory comparison (ILC) study conducted within the Horizon 2020 REFINE project, we assess five different NBM formulations, each with different uses, namely, a bio-persistent gold nanoparticle (AuNP), an IR-780 dye-loaded liposome which is used in deep tissue imaging (LipImage™815), an unloaded PACA polymeric nanoparticle used as a drug delivery system (PACA), and two loaded PACA NBMs, i.e. the cabazitaxel drug-loaded PACA (CBZ-PACA) and the NR668 dye-loaded PACA (NR668 PACA) for their potential to cause DNA strand breaks using the alkaline comet assay and discuss the current state of genotoxicity testing for nanomaterials. We have found through our interlaboratory comparison that the alkaline comet assay can be suitably applied to the pre-clinical assessment of NBMs, as a reproducible and repeatable methodology for assessing NBM-induced DNA damage.

Engineered Molecular Therapeutics Targeting Fibrin and the Coagulation System: a Biophysical Perspective

The coagulation cascade represents a sophisticated and highly choreographed series of molecular events taking place in the blood with important clinical implications. One key player in coagulation is fibrinogen, a highly abundant soluble blood protein that is processed by thrombin proteases at wound sites, triggering self-assembly of an insoluble protein hydrogel known as a fibrin clot. By forming the key protein component of blood clots, fibrin acts as a structural biomaterial with biophysical properties well suited to its role inhibiting fluid flow and maintaining hemostasis. Based on its clinical importance, fibrin is being investigated as a potentially valuable molecular target in the development of coagulation therapies. In this topical review, we summarize our current understanding of the coagulation cascade from a molecular, structural and biophysical perspective. We highlight single-molecule studies on proteins involved in blood coagulation and report on the current state of the art in directed evolution and molecular engineering of fibrin-targeted proteins and polymers for modulating coagulation. This biophysical overview will help acclimatize newcomers to the field and catalyze interdisciplinary work in biomolecular engineering toward the development of new therapies targeting fibrin and the coagulation system.

Synthesis and Characterization of Biodegradable Poly(butyl cyanoacrylate) for Drug Delivery Applications

Poly(butyl cyanoacrylate) (PBCA) is a biodegradable and biocompatible homopolymer which is used as a carrier matrix for drug delivery systems in the pharmaceutical industry. Typically, polymerization is carried out under aqueous conditions and results in molecular weights are mostly lower than 3000 g/mol due to the instability of the high molecular weight PBCA. However, the stability of polymer excipients is a major prerequisite for drug product development in the pharmaceutical industry. In this work, a reliable polymer synthesis strategy for PBCA was designed to control the molecular weight in a nonaqueous polymerization environment. The anionic polymerization process and the impact of key synthesis parameters were investigated. The results confirmed that the previously postulated depolymerization–repolymerization process (DPRP) in the literature can be used to tailor the molecular weight of PBCA. The amount of sodium methoxide present during the polymerization proved to be the key parameter to control the DPRP and the molecular weight as desired. In addition, it was discovered that end-capping the PBCA chain suppressed the DPRP and prevented monomer release by depriving the PBCA of its living character. Thus, neat PBCA polymer with varying molecular weights determined by Advanced Polymer Chromatography™ as well as end-capped PBCA were synthesized, and the improvement of the chemical and shelf-life stability were confirmed using NMR.

Label-Free Digital Holographic Microscopy for In Vitro Cytotoxic Effect Quantification of Organic Nanoparticles

Cytotoxicity quantification of nanoparticles is commonly performed by biochemical assays to evaluate their biocompatibility and safety. We explored quantitative phase imaging (QPI) with digital holographic microscopy (DHM) as a time-resolved in vitro assay to quantify effects caused by three different types of organic nanoparticles in development for medical use. Label-free proliferation quantification of native cell populations facilitates cytotoxicity testing in biomedical nanotechnology. Therefore, DHM quantitative phase images from measurements on nanomaterial and control agent incubated cells were acquired over 24 h, from which the temporal course of the cellular dry mass was calculated within the observed field of view. The impact of LipImage™ 815 lipidots^® nanoparticles, as well as empty and cabazitaxel-loaded poly(alkyl cyanoacrylate) nanoparticles on the dry mass development of four different cell lines (RAW 264.7, NIH-3T3, NRK-52E, and RLE-6TN), was observed vs. digitonin as cytotoxicity control and cells in culture medium. The acquired QPI data were compared to a colorimetric cell viability assay (WST-8) to explore the use of the DHM assay with standard biochemical analysis methods downstream. Our results show that QPI with DHM is highly suitable to identify harmful or low-toxic nanomaterials. The presented DHM assay can be implemented with commercial microscopes. The capability for imaging of native cells and the compatibility with common 96-well plates allows high-throughput systems and future embedding into existing experimental routines for in vitro cytotoxicity assessment.

Exploring Various Techniques for the Chemical and Biological Synthesis of Polymeric Nanoparticles

Nanoparticles (NPs) have remarkable properties for delivering therapeutic drugs to the body’s targeted cells. NPs have shown to be significantly more efficient as drug delivery carriers than micron-sized particles, which are quickly eliminated by the immune system. Biopolymer-based polymeric nanoparticles (PNPs) are colloidal systems composed of either natural or synthetic polymers and can be synthesized by the direct polymerization of monomers (e.g., emulsion polymerization, surfactant-free emulsion polymerization, mini-emulsion polymerization, micro-emulsion polymerization, and microbial polymerization) or by the dispersion of preformed polymers (e.g., nanoprecipitation, emulsification solvent evaporation, emulsification solvent diffusion, and salting-out). The desired characteristics of NPs and their target applications are determining factors in the choice of method used for their production. This review article aims to shed light on the different methods employed for the production of PNPs and to discuss the effect of experimental parameters on the physicochemical properties of PNPs. Thus, this review highlights specific properties of PNPs that can be tailored to be employed as drug carriers, especially in hospitals for point-of-care diagnostics for targeted therapies.

Neurosurgery at the crossroads of immunology and nanotechnology. New reality in the COVID-19 pandemic

Neurosurgery as one of the most technologically demanding medical fields rapidly adapts the newest developments from multiple scientific disciplines for treating brain tumors. Despite half a century of clinical trials, survival for brain primary tumors such as glioblastoma (GBM), the most common primary brain cancer, or rare ones including primary central nervous system lymphoma (PCNSL), is dismal. Cancer therapy and research have currently shifted toward targeted approaches, and personalized therapies. The orchestration of novel and effective blood-brain barrier (BBB) drug delivery approaches, targeting of cancer cells and regulating tumor microenvironment including the immune system are the key themes of this review. As the global pandemic due to SARS-CoV-2 virus continues, neurosurgery and neuro-oncology must wrestle with the issues related to treatment-related immune dysfunction. The selection of chemotherapeutic treatments, even rare cases of hypersensitivity reactions (HSRs) that occur among immunocompromised people, and number of vaccinations they have to get are emerging as a new chapter for modern Nano neurosurgery.

Perturbation of Cellular Redox Homeostasis Dictates Divergent Effects of Polybutyl Cyanoacrylate (PBCA) Nanoparticles on Autophagy

Nanoparticles (NPs) are used in our everyday life, including as drug delivery vehicles. However, the effects of NPs at the cellular level and their impacts on autophagy are poorly understood. Here, we demonstrate that the NP drug delivery vehicle poly(butyl cyanoacrylate) (PBCA) perturbs redox homeostasis in human epithelial cells, and that the degree of redox perturbation dictates divergent effects of PBCA on autophagy. Specifically, PBCA promoted functional autophagy at low concentrations, whereas it inhibited autophagy at high concentrations. Both effects were completely abolished by the antioxidant N-acetyl cysteine (NAC). High concentrations of PBCA inhibited MAP1LC3B/GABARAP lipidation and LC3 flux, and blocked bulk autophagic cargo flux induced by mTOR inhibition. These effects were mimicked by the redox regulator H2O2. In contrast, low concentrations of PBCA enhanced bulk autophagic cargo flux in a Vps34-, ULK1/2- and ATG13-dependent manner, yet interestingly, without an accompanying increase in LC3 lipidation or flux. PBCA activated MAP kinase signaling cascades in a redox-dependent manner, and interference with individual signaling components revealed that the autophagy-stimulating effect of PBCA required the action of the JNK and p38-MK2 pathways, whose activities converged on the pro-autophagic protein Beclin-1. Collectively, our results reveal that PBCA exerts a dual effect on autophagy depending on the severity of the NP insult and the resulting perturbation of redox homeostasis. Such a dual autophagy-modifying effect may be of general relevance for redox-perturbing NPs and have important implications in nanomedicine.

Mucoadhesive versus mucopenetrating nanoparticles for oral delivery of insulin

Mucoadhesive and mucopenetrating nanoparticles are commonly designed to improve mucosal drug delivery efficiency. Herein, in order to better understand the contribution of mucoadhesion and mucopenetration in oral delivery of biomacromolecules, insulin-loaded poly (n-butylcyanoacrylate) nanoparticles (Ins/PBCA NPs) with different coating layers, chitosan (CS) or alginate (Alg), were designed and their different absorption enhancing mechanisms were explored. It was demonstrated that both the mucoadhesive (Ins/PBCA/CS) and the mucopenetrating (Ins/PBCA/CS/Alg) nanoparticles showed good stability and similar release profiles in the gastrointestinal fluid, the mucoadhesive nanoparticles presented an enrichment in mucus (70%, 10 min) while most of the mucopenetrating nanoparticles penetrated through the mucus (80%, 10 min). Uptake mechanism studies revealed clathrin- and caveolae-mediated endocytosis were mainly involved in the intestinal transport of mucoadhesive nanoparticles while caveolae-mediated endocytosis and macropinocytosis contributed to the absorption of mucopenetrating nanoparticles, and especially, M cells favored the absorption of mucoadhesive nanoparticles. In vivo studies revealed that the mucopenetrating nanoparticles had a fast onset of action while the mucoadhesive nanoparticles presented a sustained hypoglycemic effect in diabetic rats, and overall no significant difference in pharmacological availability was found between the mucopenetrating (8.80%) and mucoadhesive nanoparticles (8.44%). To sum up, due to the varied absorption mechanism in intestine, the mucoadhesive nanoparticles designed herein had a comparable effect in enhancing oral insulin absorption compared with the mucopenetrating nanoparticles. STATEMENT OF SIGNIFICANCE: In order to improve oral delivery efficiency of insulin, insulin-loaded nanoparticles with opposite properties namely mucoadhesion and mucopenetration have been widely developed to either prolong their residence at the absorption site or improve their penetration across mucus. However, their individual contribution in oral insulin absorption is still unclear. In this paper, insulin-loaded poly (n-butylcyanoacrylate) nanoparticles with both properties were designed via different surface coating and their absorption enhancing mechanisms were explored. It was demonstrated that the mucoadhesive and mucopenetrating nanoparticles showed varied retention and mucus-penetration ability in mucus, with different absorption mechanism in intestine, but no statistical difference in pharmacological availability was found between them. Overall, the present work provides us a guidance for the design of oral nano-delivery system.

Raman Spectroscopic Characterization of Polymerization Kinetics of Cyanoacrylate Embolic Glues for Vascular Embolization

Endovascular glue embolization is a minimally invasive technique used to selectively reduce or block the blood supply to specific targeted vessels. Cyanoacrylate glues, mixed with radiopaque iodized oil, have been widely used for vascular embolization owing to their rapid polymerization rate, good penetration ability and low tissue toxicity. Nevertheless, in clinical practice, the selection of the glue–oil proportion and the manual injection process of mixtures are mostly based on empirical knowledge of operators, as the crucial physicochemical effect of polymerization kinetics has rarely been quantitatively investigated. In this study, the Raman spectroscopy is used for studying the polymerization kinetics of n-butyl-cyanoacrylate-based glues mixed with an iodized oil. To simulate the polymerization process during embolization, glue–oil mixtures upon contact with a protein ionic solution mimicking blood plasma are manually constructed and their polymerization kinetics are systematically characterized by Raman spectroscopy. The results demonstrate the feasibility of Raman spectroscopy in the characterization of polymerization kinetics of cyanoacrylate-based embolic glues. The polymerization process of cyanoacrylate-based mixtures consists of a fast polymerization phase followed by a slow phase. The propagation velocity and polymerization time primarily depend on the glue concentrations. The commonly used 50% mixture polymerizes 1 mm over ∼21.8 s, while it takes ∼51 min to extend to 5 mm. The results provide essential information for interventional radiologists to help them understand the polymerization kinetics of embolic glues and thus regulate the polymerization rate for effective embolization.

The Synthesis, Characterization and Applications of Polyhydroxyalkanoates (PHAs) and PHA-Based Nanoparticles

Polyhydroxyalkanoates (PHAs) are storage granules found in bacteria that are essentially hydroxy fatty acid polyesters. PHA molecules appear in variety of structures, and amongst all types of PHAs, polyhydroxybutyrate (PHB) is used in versatile fields as it is a biodegradable, biocompatible, and ecologically safe thermoplastic. The unique physicochemical characteristics of these PHAs have made them applicable in nanotechnology, tissue engineering, and other biomedical applications. In this review, the optimization, extraction, and characterization of PHAs are described. Their production and application in nanotechnology are also portrayed in this review, and the precise and various production methods of PHA-based nanoparticles, such as emulsion solvent diffusion, nanoprecipitation, and dialysis are discussed. The characterization techniques such as UV-Vis, FTIR, SEM, Zeta Potential, and XRD are also elaborated.

On the Development of a Cutaneous Flavonoid Delivery System: Advances and Limitations

Flavonoids are one of the vital classes of natural polyphenolic compounds abundantly found in plants. Due to their wide range of therapeutic properties, which include antioxidant, anti-inflammatory, photoprotective, and depigmentation effects, flavonoids have been demonstrated to be promising agents in the treatment of several skin disorders. However, their lipophilic nature and poor water solubility invariably lead to limited oral bioavailability. In addition, they are rapidly degraded and metabolized in the human body, hindering their potential contribution to the prevention and treatment of many disorders. Thus, to overcome these challenges, several cutaneous delivery systems have been extensively studied. Topical drug delivery besides offering an alternative administration route also ensures a sustained release of the active compound at the desired site of action. Incorporation into lipid or polymer-based nanoparticles appears to be a highly effective approach for cutaneous delivery of flavonoids with good encapsulation potential and reduced toxicity. This review focuses on currently available formulations used to administer either topically or systemically different classes of flavonoids in the skin, highlighting their potential application as therapeutic and preventive agents.

Functionalized Particles Designed for Targeted Delivery

Pure bioactive compounds alone can only be exceptionally administered in medical treatment. Usually, drugs are produced as various forms of active compounds and auxiliary substances, combinations assuring the desired healing functions. One of the important drug forms is represented by a combination of active substances and particle-shaped polymer in the nano- or micrometer size range. The review describes recent progress in this field balanced with basic information. After a brief introduction, the paper presents a concise overview of polymers used as components of nano- and microparticle drug carriers. Thereafter, progress in direct synthesis of polymer particles with functional groups is discussed. A section is devoted to formation of particles by self-assembly of homo- and copolymer-bearing functional groups. Special attention is focused on modification of the primary functional groups introduced during particle preparation, including introduction of ligands promoting anchorage of particles onto the chosen living cell types by interactions with specific receptors present in cell membranes. Particular attention is focused on progress in methods suitable for preparation of particles loaded with bioactive substances. The review ends with a brief discussion of the still not answered questions and unsolved problems.

Biodistribution of Poly(alkyl cyanoacrylate) Nanoparticles in Mice and Effect on Tumor Infiltration of Macrophages into a Patient-Derived Breast Cancer Xenograft

We have investigated the biodistribution and tumor macrophage infiltration after intravenous injection of the poly(alkyl cyanoacrylate) nanoparticles (NPs): PEBCA (poly(2-ethyl-butyl cyanoacrylate), PBCA (poly(n-butyl cyanoacrylate), and POCA (poly(octyl cyanoacrylate), in mice. These NPs are structurally similar, have similar PEGylation, and have previously been shown to give large variations in cellular responses in vitro. The PEBCA NPs had the highest uptake both in the patient-derived breast cancer xenograft MAS98.12 and in lymph nodes, and therefore, they are the most promising of these NPs for delivery of cancer drugs. High-resolution magic angle spinning magnetic resonance (HR MAS MR) spectroscopy did not reveal any differences in the metabolic profiles of tumors following injection of the NPs, but the PEBCA NPs resulted in higher tumor infiltration of the anti-tumorigenic M1 macrophages than obtained with the two other NPs. The PEBCA NPs also increased the ratio of M1/M2 (anti-tumorigenic/pro-tumorigenic) macrophages in the tumors, suggesting that these NPs might be used both as a vehicle for drug delivery and to modulate the immune response in favor of enhanced therapeutic effects.

Biomedical application of chondroitin sulfate with nanoparticles in drug delivery systems: systematic review

Chondroitin sulphate captured an increasing amount of attention in the field of drug delivery systems. Nanoparticles and chondroitin sulphate were combined in different ways to form effective target nanocarriers. The study aimed to evaluate the biomedical application of chondroitin sulphate with nanoparticles in drug delivery systems. We searched PubMed, Google Scholar, and MEDLINE for studies that included data for the application of chondroitin sulphate and nanoparticles in targeting drug delivery published in English up to 25 February 2020. OHAT (Office of Health Assessment and Translation) Risk-of-Bias Tool was used to assessing the quality and risk of bias of each study. We performed a qualitative synthesis of findings from included studies. The toxicity of developed drugs has been evaluated using cell viability percentage and 50% inhibitory concentration of drugs. Twenty original articles reported the application of chondroitin sulphate on drug delivery systems were selected. Drug loading and encapsulation efficiency were from 2% to 16.1% and from 39.50% to 93.97%, respectively. The drug release was fast at start time and followed by a slow and sustain released stage. The risk of bias was rated as high in two out of twenty studies. Most of the studies presented baseline characteristics and outcomes appropriately.

Histopathological Comparison of 2-Octyl Cyanoacrylate and Primary Suturing for Tongue Lacerations

OBJECTIVE

To enable tongue incisions to be repaired more easily, rapidly, and practically, particularly in pediatric patients by using 2-octyl cyanoacrylate (OCA) tissue adhesive.

METHODS

A single linear incision was made on the midline dorsal part of the tongue. Twenty-four rats were randomly divided into the four groups: Group 1 (n = 6), OCA healing at day 5; group 2 (n = 6), OCA healing at day 21; group 3 (n = 6), Vicryl healing at day 5; group 4 (n = 6), Vicryl healing at day 21. In groups 1 and 2, OCA was applied to the incision site. The incisions of the rats in groups 3 and 4 were closed using Vicryl sutures. Histopathological examination was compared between and within the groups at day 5 and 21.

RESULTS

The operation duration was significantly shorter with OCA than with Vicryl sutures(P < 0.001). Regarding the histopathological results, there were no differences between group 1 and group 3 in epithelial regeneration, inflammation, fibroblastic activity, edema, presence of giant cells, fibrin deposition, ulceration, abscess formation, and granulation tissue. However, moderate infiltration of acute inflammatory cells was significantly more frequent in group 1 than in group 3. At day 5, the incidence of moderate foreign body residue was significantly higher in group 1 than in group 3. No difference was observed between group 2 and group 4 at day 21 (P > 0.05).

CONCLUSION

OCA is a practical, rapid, and effective method for repairing tongue lacerations. Although infiltration by inflammatory cells and foreign bodies increased in the early period, the long-term results of OCA were indistinguishable from those of suturing.

N,N,N-trimethylchitosan-poly (n-butylcyanoacrylate) core-shell nanoparticles as a potential oral delivery system for acyclovir

This study investigated the feasibility of polysaccharide-coated poly(n-butyl cyanoacrylate) (PBCA) nanoparticles for oral delivery of acyclovir (ACV). PBCA nanoparticles were obtained by the emulsion polymerization method. Chitosan was chemically modified to obtain N,N,N-trimethylchitosan (TMC), which was used to coat the nanoparticles (PBCA-TMC). Nanoparticles were characterized by dynamic light scattering, zeta potential, differential scanning calorimetry (DSC), atomic force microscopy (AFM), cytotoxicity, and the effect on the transepithelial electrical resistance (TEER) of the Caco-2 cells. The size of the coated nanoparticles (296.2 nm) was significantly larger than uncoated (175.0 nm). Furthermore, PBCA nanoparticles had a negative charge (-11.7 mV), which was inverted to highly positive values (+36.5 mV) after coating. DSC analysis suggested the occurrence of the coating, which was confirmed by AFM images. The MTT assay revealed concentration-dependent cytotoxicity for the core-shell nanoparticles. Additionally, PBCA-TMC caused a significant but reversible decrease in the Caco-2 cell monolayer TEER. Entrapped ACV (PBCA-ACV-TMC), a Biopharmaceutical Classification System class III drug substance, increased approximately 3.25 times the Papp of ACV in the Caco-2 permeability assay. The nanoparticles were also able to provide in vitro ACV controlled release using media with different pH values (1.2; 6.8; 7.4). Accordingly, this new core-shell nanoparticle showed the potential to improve the oral delivery of ACV.

Nanomedicines for the Delivery of Antimicrobial Peptides (AMPs)

Microbial infections are still among the major public health concerns since several yeasts and fungi, and other pathogenic microorganisms, are responsible for continuous growth of infections and drug resistance against bacteria. Antimicrobial resistance rate is fostering the need to develop new strategies against drug-resistant superbugs. Antimicrobial peptides (AMPs) are small peptide-based molecules of 5–100 amino acids in length, with potent and broad-spectrum antimicrobial properties. They are part of the innate immune system, which can represent a minimal risk of resistance development. These characteristics contribute to the description of these molecules as promising new molecules in the development of new antimicrobial drugs. However, efforts in developing new medicines have not resulted in any decrease of drug resistance yet. Thus, a technological approach on improving existing drugs is gaining special interest. Nanomedicine provides easy access to innovative carriers, which ultimately enable the design and development of targeted delivery systems of the most efficient drugs with increased efficacy and reduced toxicity. Based on performance, successful experiments, and considerable market prospects, nanotechnology will undoubtedly lead a breakthrough in biomedical field also for infectious diseases, as there are several nanotechnological approaches that exhibit important roles in restoring antibiotic activity against resistant bacteria.

Design of self-polymerized insulin loaded poly(n-butylcyanoacrylate) nanoparticles for tunable oral delivery

Macromolecular drugs, characterized by low stability and large molecular weight, still faced various difficulties by oral administration. And controlling drugs' release rate to reach the physiological concentration in the blood was recognized as one of the main challenges in this field but no studies are available so far. Thus, the objective of this study was to investigate the effect of insulin release rate on its in vitro and in vivo behavior when other obstacles (drug stability, mucus penetration and retention in gastrointestinal tract) was firstly overcome. Using n-butylcyanoacrylate (BCA) as the carrier, insulin-loaded Poly (n-butylcyanoacrylate) nanoparticles (Ins/PBCA NPs) were prepared by self-polymerization and the release rate of insulin was controlled by adjusting the mass ratio of Insulin/BCA. The NPs exhibited good stability in gastric fluid with controlled release in intestine and the release rate increased with the increase of Insulin/BCA mass ratio. All the Ins/PBCA NPs with different release rate showed excellent mucus penetration (>60%, 10 min) and strong gastrointestinal retention (~70%, 12 h). Especially, all the NPs showed promising hypoglycemic effect with the extent depending on drug release rate. Ins/BCA = 2/10 NPs exhibited fast hypoglycemic effect, while Ins/BCA = 2/15 NPs showed slow and outstanding performance. In conclusion, Ins/PBCA NPs could not only overcome the oral barriers of insulin delivery but also provide desired hypoglycemic effect by controlling insulin release rate.

Biodistribution and pharmacokinetics of thiolated chitosan nanoparticles for oral delivery of insulin in vivo

To improve the quality of life of diabetic patients, oral delivery of insulin would be better than subcutaneous injection, and the encapsulation of insulin for its oral delivery is a promising alternative one. In this study, we prepared an oral insulin delivery system using thiolated chitosan nanoparticles (TCNPs) loaded with insulin (Ins) and tested under in vitro and in vivo systems. TCNPs prepared from CS and pentaerythritol tetrakis (3-mercaptopropionate) (PETMP) at 4:1 ratio showed 220 ± 4 nm, 2.3 ± 1 mV, and 119 ± 4 μmol g^-1 in their size, charge and sulfhydryl content, respectively. There was a sustained release of insulin from the TCNPs at pH 5.3. TCNPs treatment did not alter cell viability in vitro and oral administration of TCNPs reached over the tip of the microvilli near the intestinal mucosa in vivo. There were increased and decreased the levels of insulin and glucose in the blood, respectively when Ins-TCNPs were orally administered in the diabetes induced rats. Thus, our results suggested that the insulin stays significantly for a prolonged period to make bio-distribution and bioavailability due to its interaction with the mucus of the intestine, thus offering a better oral insulin delivery system for diabetic patients.

Nanomedicinal strategies as efficient therapeutic interventions for delivery of cancer vaccines

The applications of gene therapy-based treatment of cancers were started almost two decades back as a boon over the chemotherapeutic treatment strategies. Gene therapy helps in correcting the genetic sequences for treatment of cancers, thus also acts like a vaccine to induce the cellular and humoral immunity. However, the cancer vaccines typically suffer from a series of biopharmaceutical challenges due to poor solubility, low systemic availability and lack of targeting ability. Owing to these challenges, the physicians and pharmaceutical scientists have explored the applications of nanocarriers as quite promising systems for effective treatment against the tumors. A series of nanotherapeutic systems are available to date for diverse drug therapy applications. Systematic understanding on the preparation, evaluation and application of nanomedicines as a carrier system for delivering the cancer vaccines is highly important. The present review article provides an in-depth understanding on the challenges associated with cancer vaccine delivery and current opportunities with diverse nanomedicinal carriers being available for treatment of cancers.

Core/shell nanoassembly of amphiphilic naproxen-polyethylene glycol: synthesis, characterisation and evaluation as drug delivery system

Small molecule-based amphiphiles self-assemble into nanostructures (micelles) in aqueous medium which are currently being explored as novel drug delivery systems. Here, naproxen-polyethylene glycol (N-PEG), a small molecule-derived amphiphile, has been synthesised, characterised and evaluated as hydrophobic drug carrier. ¹H, ¹³C Nuclear magnetic resonance (NMR), mass spectrometry (MS) and Fourier-transform infrared spectroscopy (FTIR) confirmed the formation of N-PEG and dynamic light scattering (DLS) revealed the formation of nano-sized structures of ∼228 nm. Transmission electron microscope (TEM) analysis showed aggregation behaviour of the structures with average size of ∼230 nm. Biodegradability aspect of the micellar-structured N-PEG was demonstrated by lipase-mediated degradation studies using DLS and TEM. High encapsulation efficiency followed by release in a sustained manner of a well-known anticancer drug, doxorubicin, demonstrated the feasibility of the new drug delivery system. These results advocate the promising potential of N-PEG micelles as efficient drug delivery system for specific delivery to cancerous cells in vitro and in vivo.

Anionic Polymerization of Methylene Malonate for High-Performance Coatings

Here, we demonstrate the anionic polymerization and the high reactivity of the novel monomer diethyl methylene malonate (DEMM). At room temperature and under atmospheric conditions, water and anionic functional groups (i.e., carboxyl, boronic, and phenol) quickly initiate DEMM. The polymerization of DEMM in water and the final molecular weight of the polymer were both demonstrated to be pH-dependent. Systematically, investigations were conducted to study the conversion rate of DEMM with various functional groups, and the polymerization was verified to occur with anionic groups using a carboxylate-initiated DEMM system. For coating applications, we also investigated a multifunctional derivative monomer called (DEMM)₆ that is an oligomeric polyester of DEMM esterified with butanediol that contains on average six repeat units of reactive DEMM (commercially known as Forza B3000 XP). The incorporation of 15 wt % (DEMM)₆ into latex containing methacrylate acid as a functional monomer yielded cross-linked coatings with a gel content of 76.25 wt % that had a 289% improvement in rub-resistance performance compared to controls (without (DEMM)₆). This study provides a facile methodology to synthesize cross-linked latex coatings at room temperature.

Histological analysis of biocompatibility of different surgical adhesives in subcutaneous tissue

The focus of this study was to test the hypothesis that there would be no difference between the biocompatibility of cyanoacrylate-based adhesives in rat subcutaneous tissues. In total, 60 male Wistar rats were used, and divided into four groups (n = 15): Group C (control, PVA-polyvinyl alcohol sponge), Group NO (N-butyl-2-octylcyanoacrylate), Group NH (n-hexyl-cyanoacrylate), and Group EC (Ethyl-cyanoacrylate). The animals were sacrificed after time intervals of 7, 15, and 30 days and tissues were analyzed under optical microscope as regards the events of inflammatory infiltrate, edema, necrosis, granulation tissue, giant cells, young fibroblasts, and collagen formation. The results were statistically analyzed by the Kruskal-Wallis and Dunn tests (p < .05). Significant inflammatory infiltrate was shown for all the adhesives in the time intervals of 7 (p = .004) and 15 days (p = .003). In the time interval of 30 days, moderate inflammatory infiltrate was observed in Groups NH and EC, with significant difference from Control (p = .001). The quantity of collagen fibers in all the experimental groups showed significant difference compared with Control in the time intervals of 7 (p = .002) and 15 days (p = .001), at 30 days only Group EC showed a smaller quantity of collagen fibers in comparison with Control (p = .001). The hypothesis was rejected. The adhesive N-butyl-2-octylcyanoacrylate had less influence on the inflammatory intensity of multinucleated giant cells. Ethyl-cyanoacrylate demonstrated the lowest level of biocompatibility among the adhesives, but its use in clinical practice may be promising for coaptation of smaller edges of superficial tissue. Surgical adhesives were shown to be feasible for clinical use in substitution of conventional suturing. Ethyl-cyanoacrylate should be used with caution due to its greater influence on tissues.

A journey through the emergence of nanomedicines with poly(alkylcyanoacrylate) based nanoparticles

Starting in the late 1970s, the pioneering work of Patrick Couvreur gave birth to the first biodegradable nanoparticles composed of a biodegradable synthetic polymer. These nanoparticles, made of poly(alkylcyanoacrylate) (PACA), were the first synthetic polymer-based nanoparticulate drug carriers undergoing a phase III clinical trial so far. Analyzing the journey from the birth of PACA nanoparticles to their clinical evaluation, this paper highlights their remarkable adaptability to bypass various drug delivery challenges found on the way. At present, PACA nanoparticles include a wide range of nanoparticles that can associate drugs of different chemical nature and can be administered in vivo by different routes. The most recent technologies giving the nanoparticles customised functions could also be implemented on this family of nanoparticles. Through different examples, this paper discusses the seminal role of the PACA nanoparticles' family in the development of nanomedicines.

From poly(alkyl cyanoacrylate) to squalene as core material for the design of nanomedicines

This review article covers the most important steps of the pioneering work of Patrick Couvreur and tries to shed light on his outstanding career that has been a source of inspiration for many decades. His discovery of biodegradable poly(alkyl cyanoacrylate) (PACA) nanoparticles (NPs) has opened large perspectives in nanomedicine. Indeed, NPs made from various types of alkyl cyanoacrylate monomers have been used in different applications, such as the treatment of intracellular infections or the treatment of multidrug resistant hepatocarcinoma. This latest application led to the Phase III clinical trial of Livatag^®, a PACA nanoparticulate formulation of doxorubicin. Despite the success of PACA NPs, the development of a novel type of NP with higher drug loadings and lower burst release was tackled by the discovery of squalene-based nanomedicines where the drug is covalently linked to the lipid derivative and the resulting conjugate is self-assembled into NPs. This pioneering work was accompanied by a wide range of novel applications which mainly dealt with the management of unmet medical needs (e.g. pancreatic cancer, brain ischaemia and spinal cord injury).

Natural biodegradable polymers based nano-formulations for drug delivery: A review

Nanomedicines are now considered as the new-generation medication in the current era mainly because of their features related to nano size. The efficacy of many drugs in their micro/macro formulations is shown to have poor bioavailability and pharmacokinetics after oral administration. To overcome this predicament, use of natural/synthetic biodegradable polymeric nanoparticles (NPs) have gained prominence in the field of nanomedicine for targeted drug delivery to improve biocompatibility, bioavailability, safety, enhanced permeability, better retention time and lower toxicity. For drug delivery, it is essential to have biodegradable nanoparticle formulations for safe and efficient transport and release of drug at the intended site. Moreover, depending on the target organ, a suitable biodegradable polymer can be selected as the drug-carrier for target specific as well as for sustained drug delivery. The aim of this review is to present the current status and scope of natural biodegradable polymers as well as some emerging polymers with special characteristics as suitable carriers for drug delivery applications. The most widely preferred preparation methods are discussed along with their characterization using different analytical techniques. Further, the review highlights significant features of methods developed using natural polymers for drug entrapment and release studies.