One- and three-month release injectable microspheres of the LH-RH superagonist leuprorelin acetate

Development and Applications of PLGA Hydrogels for Sustained Delivery of Therapeutic Agents

Poly(lactic-co-glycolic acid) (PLGA) hydrogels are highly utilized in biomedical research due to their biocompatibility, biodegradability, and other versatile properties. This review comprehensively explores their synthesis, properties, sustained release mechanisms, and applications in drug delivery. The introduction underscores the significance of PLGA hydrogels in addressing challenges like short half-lives and systemic toxicity in conventional drug formulations. Synthesis methods, including emulsion solvent evaporation, solvent casting, electrospinning, thermal gelation, and photopolymerization, are described in detail and their role in tailoring hydrogel properties for specific applications is highlighted. Sustained release mechanisms-such as diffusion-controlled, degradation-controlled, swelling-controlled, and combined systems-are analyzed alongside key kinetic models (zero-order, first-order, Higuchi, and Peppas models) for designing controlled drug delivery systems. Applications of PLGA hydrogels in drug delivery are discussed, highlighting their effectiveness in localized and sustained chemotherapy for cancer, as well as in the delivery of antibiotics and antimicrobials to combat infections. Challenges and future prospects in PLGA hydrogel research are discussed, with a focus on improving drug loading efficiency, improving release control mechanisms, and promoting clinical translation. In summary, PLGA hydrogels provide a promising platform for the sustained delivery of therapeutic agents and meet diverse biomedical requirements. Future advancements in materials science and biomedical engineering are anticipated to further optimize their efficacy and applicability in clinical settings. This review consolidates the current understanding and outlines future research directions for PLGA hydrogels, emphasizing their potential to revolutionize therapeutic delivery and improve patient outcomes.

The Advances in Phospholipids-Based Phase Separation Gels for the Sustained Release of Peptides, Proteins, and Chemotherapeutics

Implantable drug delivery systems formed upon injection offer a host of advantages, including localized drug administration, sustained release, minimized side effects, and enhanced patient compliance. Among the various techniques utilized for the development of in situ forming drug implants, solvent-induced phase inversion emerges as a particularly promising approach. However, synthetic polymer-based implants have been associated with undesirable effects arising from polymer degradation. In response to this challenge, a novel category of drug delivery systems, known as phospholipids-based phase separation gels (PPSGs), has emerged. These gels, characterized by their low initial viscosity, exhibit injectability and undergo rapid transformation into in situ implants when exposed to an aqueous environment. A typical PPSG formulation comprises biodegradable components, such as phospholipids, pharmaceutical oil, and a minimal amount of ethanol. The minimized organic solvents in the composition show good biocompatibility. And the relatively simple composition holds promise for industrial-scale manufacturing. This comprehensive review provides an overview of the principles and advancements in PPSG systems, with specific emphasis on their suitability as drug delivery systems for a wide range of active pharmaceutical ingredients (APIs), spanning from small molecules to peptides and proteins. Additionally, we explore the critical parameters and underlying principles governing the formulation of PPSG-based drug delivery strategies, offering valuable insights on optimization strategies.

Mechanistic evaluation of the initial burst release of leuprolide from spray-dried PLGA microspheres

Spray-dried poly(lactic-co-glycolic acid) (PLGA) peptide-loaded microspheres have demonstrated similar long-term in vitro release kinetics compared to those produced by the solvent evaporation method and commercial products. However, the difficult-to-control initial burst release over the first 24 h after administration presents an obstacle to product development and establishing bioequivalence. Currently, detailed information about underlying mechanisms of the initial burst release from microspheres is limited. We investigated the mechanism and extent of initial burst release using 16 previously developed spray-dried microsphere formulations of the hormone drug, leuprolide acetate, with similar composition to the commercial 1-month Lupron Depot® (LD). The burst release kinetics was measured with a previously validated continuous monitoring system as well as traditional sample-and-separate methods. The changes in pore structure and polymer permeability were investigated by SEM imaging and the uptake of a bodipy-dextran probe. In vitro results were compared to pharmacokinetics in rats over the same interval. High-burst, spray-dried microspheres were differentiated in the well-mixed continuous monitoring system but reached an upper limit when measured by the sample-and-separate method. Pore-like occlusions observed by confocal microscopy in some formulations indicated that particle swelling may have contributed to probe diffusion through the polymer phase and showed the extensive internal pore structure of spray-dried particles. Continuous monitoring revealed a rapid primary (1°) phase followed by a constant-rate secondary (2°) release phase, which comprised ∼80% and 20% of the 24-hr release, respectively. The ratio of 1° phase duration (t1°) and the characteristic probe diffusion time (τ) was highly correlated to 1° phase release for spray dried particles. Of the four spray-dried formulations administered in vivo, three spray-dried microspheres with similar polymer density showed nearly ideal linear correlation between in vivo absorption and well-mixed in vitro release kinetics over the first 24 h. By contrast, the more structurally dense LD and a more-dense in-house formulation showed a slight lag phase in vivo relative to in vitro. Furthermore, in vitro dimensionless times (tburst/τ) were highly correlated with pharmacokinetic parameters for spray-dried microspheres but not for LD. While the correlation of increases in effective probe diffusion and 1° phase release strongly suggests diffusion through the polymer matrix as a major release mechanism both in vitro and in vivo, a fixed lower limit for this release fraction implies an alternative release mechanism. Overall, continuous monitoring release and probe diffusion appears to have potential in differentiating between leuprolide formulations and establishing relationships between in vitro release and in vivo absorption during the initial burst period.

Influence of encapsulation variables on formation of leuprolide-loaded PLGA microspheres

Emulsion-based solvent evaporation microencapsulation methods for producing PLGA microspheres are complex often leading to empirical optimization. This study aimed to develop a more detailed understanding of the effects of process variables on the complex emulsification processes during encapsulation of leuprolide in PLGA microspheres using a high-shear rotor-stator mixer. Following extensive analysis of previously developed formulation conditions that yield microspheres of equivalent composition to the commercial 1-month Lupron Depot, multiple variables during the formation of primary and secondary emulsion were investigated with the aid of dimensional analysis, including: rotor speed (ω) and time (t), dispersed phase fraction (Φ) and continuous phase viscosity (µ_c). The dimensionless Sauter mean diameter (d_3,2) of primary emulsion was observed to be proportional to the product of several key dimensionless groups (Φ₁,We,Re,ω₁t₁) raised to the appropriate power indices. A new dimensionless group (Θ ) (surface energy/energy input) was used to rationalize insertion of a proportionate time dependence in the scaling of the d_3,2. The dimensionless d_3,2 of secondary emulsion was found proportional to the product of three dimensionless groups ( [Formula: see text] ) raised to the appropriate power indices. The increased viscosity of the primary emulsion, decreased secondary water phase volume and reduced second homogenization time each elevated encapsulation efficiency of peptide by reducing drug leakage to the outer water phase. These results could be useful for dimensional analysis and improving manufacturing of PLGA microspheres by the solvent evaporation method.

Preparation and evaluation of sustained release formulation of PLGA using a new injection system based on ink-jet injection technology

We developed a method for the preparation of PLGA particles exhibiting long-term sustained-release of entrapped drugs. The fine droplet drying (FDD) technology using a new injection system based on ink-jet injection technology was adapted as the preparation method. PLGA microspheres containing TRITC-dextran, acetaminophen, and albumin as model drugs were prepared by the FDD technology. The resultant microspheres were uniform in size, with average particle sizes ranging from 16.3 to 33.0 μm and SPAN factors ranging from 0.49 to 0.77. The encapsulation efficiency of drugs showed high values ranging from 75 to 99 wt% of the total amount of water-soluble drug contained in the particles. In an investigation of the optimal operation conditions of the FDD technology, the dew point temperature of the dryer air stream was found to be an important factor for controlling the initial burst of the prepared particles. The TRITC-dextran-containing PLGA microspheres were confirmed to exhibit long-term sustained release for about 90 days, and the mechanism was found to be PLGA degradation rate-limiting. Based on these results, we concluded that long-term sustained-released PLGA particles can be prepared by using FDD technology under a suitable drying condition for controlling the initial burst.

Long-acting injectable PLGA/PLA depots for leuprolide acetate: successful translation from bench to clinic

The excellent properties of polyesters combined with their ease of synthesis and modification enabled their wide use in the pharmaceutical industry. This has been translated into the approval of several injectable depots for clinical use. Long-acting depots for leuprolide acetate were among the first and most successful examples including Lupron Depot^® and ELIGARD^®. Studying these products is of great interest for researchers in both industry and academia. This will undoubtedly pave the road for the development of new as well as generic long-acting depots for a variety of drugs.

Discovery of TP0597850: A Selective, Chemically Stable, and Slow Tight-Binding Matrix Metalloproteinase-2 Inhibitor with a Phenylbenzamide-Pentapeptide Hybrid Scaffold

Matrix metalloproteinase-2 (MMP2) is a zinc-dependent endopeptidase and a promising target for various diseases, including cancer and fibrosis. Herein, we report the discovery of a novel MMP2-selective inhibitor with high chemical stability and slow tight-binding features. Based on the degradation mechanism of our small-molecule-peptide hybrid 1, the tripeptide linker {5-aminopentanoic acid [Ape(5)]-Glu-Asp} of 1 was replaced by a shorter linker (γ-D-Glu). Phenylbenzamide was suitable for the new generation of MMP2 inhibitors as an S1' pocket-binding group. The introduction of (4S)-aminoproline dramatically increased the chemical stability while maintaining high subtype selectivity because of its interaction with Glu130. TP0597850 (18) exhibited high stability over a wide range of pH values as well as potent MMP2 inhibition (K_i = 0.034 nM) and ≥2000-fold selectivity determined using the inhibition constants. A kinetic analysis revealed that it possesses slow tight-binding nature with a long MMP2 dissociative half-life (t_1/2 = 265 min).

Letrozole as premedication of high intensity focused ultrasound treatment of uterine fibroids: A retrospective observation study

Background

No reports on Letrozole as a pretreatment before ablation of uterine fibroid with high intensity focused ultrasound (HIFU), so a retrospective observation study was performed to evaluate the response of different pre-HIFU medication.

Methods

We collected patients with single uterine fibroid receiving HIFU ablation from January 2018 to April 2021. All enrolled patients were classified into three group: group A (no pre-HIFU medication use), group B (Pre-HIFU letrozole use), group C (pre-HIFU gonadotrophin releasing hormone analog, GnRHa). Further associated clinical data and treatment response after HIFU treatment were reviewed and evaluated.

Results

A total of 39 patients including 21, 7, and 11 in group A, B, and C were collected respectively. After pre-HIFU medication, no difference of fibroid volume was found (A: 251.4, B: 360.6, C: 409.4 cm³, p = 0.250), and GnRHa group had significantly larger volume reduction than Letrozole users (38.6% vs. 16.4%, p = 0.007). The incidence of hypoestrogenic symptoms was higher in GnRHa group than in letrozole users (27.3% vs. 0, p = 0.170). GnRHa group had more sonication time (p = 0.001), treatment duration (p = 0.002), and ablated energy (p = 0.001) than group A and B. The treatment efficiency was higher in letrozole group than that in other 2 groups (4.52 vs. 2.39 vs. 2.34 cm³/min, p = 0.050). For patients with fibroid over 10 cm in diameter, letrozole group had even better energy efficiency (p = 0.067), treatment speed (p = 0.007), treatment efficiency (p = 0.001), NPV per energy (p = 0.005), and NPV per sonication (p = 0.004) than other 2 groups.

Conclusion

Letrozole as a pretreatment medication before HIFU treatment might increase the energy efficiency and treatment efficiency of its ablation of uterine leiomyoma, especially for fibroid over 10 cm. Future study of larger patient number is needed to confirm our results.

IVIVC of Octreotide in PLGA-Glucose Microsphere Formulation, Sandostatin® LAR

In vitro-in vivo correlation (IVIVC) analysis reveals a relationship between in vitro release and in vivo pharmacokinetic response of the drug of interest. Sandostatin LAR Depot (SLD) for endocrine tumors and acromegaly is a sustained-release formulation of octreotide, a cyclic oligomer of 8 amino acids, which prolongs therapeutic efficacy and enhances medication compliance of octreotide. Since the efficacy of SLD is dependent on the pharmacokinetic characteristics of octreotide released from a biodegradable matrix polymer, poly(lactide-co-glycolide)-glucose, of SLD, the IVIVC of SLD is critical for predicting an in vivo behavior of the octreotide. In this study, in vitro release of octreotide from SLD was investigated using the release test media each containing 0.02% or 0.5% surfactant and having different pH values of 7.4 and 5.5. In vivo pharmacokinetic profiles of SLD were determined by LC-MS/MS analysis of the systemic blood concentration of octreotide after the SLD injection to rodents. In IVIVC analysis, the Weibull model was adopted as a drug release model for biodegradable microsphere formulation. The IVIVC analyses revealed the in vitro release test condition of SLD with the highest IVIV correlation coefficient. By applying the in vitro release data to the model derived from the IVIVC analysis, pharmacokinetic parameters of SLD could be predicted with the prediction error of ± 10 ~ 15%. IVIVC analysis and pharmacokinetic prediction model of SLD in our study can be an efficient tool for the development of long-acting pharmaceutical dosage forms.

Advances in encapsulating gonadotropin-releasing hormone agonists for controlled release: a review

Gonadotropin-releasing hormone (GnRH) agonists are peptides consisting of nine or ten amino acid residues. GnRH agonists have been applied in the therapy of sexual hormone disorders like prostate cancer, endometriosis, uterine myoma, central precious puberty, and in-vitro fertility. Treatment is achieved by continuous hormone intake and long-term agonists administration, which is usually associated with poor patient compliance. Because GnRH agonists that are administered with the parenteral route are broken down by peptidase, their half-life is short. As a result, developing sustained release for the drug delivery system is significant. Even though some drugs have been successfully delivered with long-acting release microspheres and approved by the Food and Drug Administration (FDA), some challenges remain. This review highlighted current approaches to encapsulate GnRH agonists into delivery systems and strategies encountered during the loading process. Moreover, the following sections provide strategies to improve the release profile, and animal and human studies were summarised.

New long-acting injectable microspheres prepared by IVL-DrugFluidic™ system: 1-month and 3-month in vivo drug delivery of leuprolide

The microspheres for 1-month (PLGA-based) and 3-month (PLA-based) drug releases of leuprolide were manufactured using an IVL-DrugFluidic™ system and their morphology, particle size and distribution, and encapsulation efficiency were compared with the commercialized products. In vivo test was also conducted to monitor the amount of leuprolide and testosterone in plasma after a single subcutaneous injection in male Sprague-Dawley (SD) rats and male Beagle dogs. The median diameter, span value, drug loading, and encapsulation efficiency of PLGA-based microspheres (63.29 μm, 0.26, 13.15%, and 78.90%, respectively) and PLA-based microspheres (80.28 μm, 0.21, 14.42%, and 86.50%, respectively) demonstrated narrow particle size distribution (monodispersed) and efficient drug loading/encapsulation efficiency. Both the microspheres exhibited a desired time-dependent drug release profile and reduced initial burst release by 16-fold in SD rats and 240-fold in Beagle dogs compared to Leuplin DPS®. Moreover, the testosterone level in plasma was suppressed to < 0.50 ng/mL after 28 days with a steady plasma drug concentration. The results suggested that newly developed leuprolide-loaded microspheres produced by the IVL-DrugFluidic™ system could provide extended drug release with advantages such as reduced initial burst release and testosterone level suppression, along with steady plasma drug concentration, over the existing products.

Long-acting microspheres of Human Chorionic Gonadotropin hormone: In-vitro and in-vivo evaluation

Human Chorionic Gonadotropin (hCG) hormone is used to cause ovulation, treat infertility in women, and increase sperm count in men. Conventional hCG solution formulations require multiple administration of hCG per week and cause patient noncompliance. The long-acting PLGA depot microspheres (MS) approach with hCG can improve patient compliance, increase the efficacy of hCG with a lower total dose and improve quality of life. Therefore, hCG was encapsulated by a modified double emulsion solvent evaporation technique within PLGA MS by high-speed homogenizer and industrially scalable in-line homogenizer, respectively. MS was characterized for particle size, encapsulation efficiency (EE), surface morphology, and in-vitro release. The spherical, dense, non-porous microspheres were obtained with a size of 58.88 ± 0.18 µm. Microspheres showed high EE (77.4% ± 5.9%) with low initial burst release (12.82% ± 2.07%). Circular Dichroism and SDS-PAGE analysis indicated good stability and structural integrity of hCG in the microspheres. Its bioactivity was proven further by a bioassay study in immature Wistar rats. Pharmacokinetic analysis showed that the hCG PLGA MS maintained serum hCG concentration up to 13 days compared to multiple injections of a marketed conventional parenteral injectable formulation of hCG. Thus, it can be ascertained that the hCG PLGA MS may have great potential for clinical use in long-term therapy.

Gonadotropin-releasing hormone analog therapies for children with central precocious puberty in the United States

Gonadotropin-releasing hormone agonists (GnRHa's) are the standard treatment for children with central precocious puberty (CPP). We aim to present data on available GnRHa options with an easy-to-review table and discuss factors that influence treatment selection. Five GnRHa's are currently FDA-approved and prescribed in the US and published data suggest similar safety and efficacy profiles over the first year of treatment. One- and 3-month intramuscular (IM) leuprolide acetate (LA) have long-term safety and efficacy data and allow for flexible dosing. Six-month IM triptorelin pamoate offers a longer duration of treatment, but without long-term efficacy and outcome data. Six-month subcutaneous (SQ) LA combines a SQ route of injection and long duration of action but lacks long-term efficacy and outcome data. The 12-month SQ histrelin acetate implant avoids injections and offers the longest duration of action, but requires a minor surgical procedure with local or general anesthesia. Factors in treatment selection include route of administration, needle size, injection volume, duration of action, and cost. The current GnRHa landscape provides options with varying benefits and risks, allowing physicians and caregivers to select the most appropriate therapy based on the specific needs and concerns of the child and the caregiver. Agents have different advantages and disadvantages for use, with no one agent displaying superiority.

Preparation of Long-acting Somatostatin and GnRH Analogues and their Applications in Tumor Therapy

Hormonal drugs are essential treatment options for some hormone-dependent or hormone-sensitive tumors. The common dosage forms of hormonal drugs have a short half-life. Hence, frequent administration is needed, which results in poor patient compliance. Nevertheless, using drug delivery technology, somatostatin analogues (SSAs) and gonadotropin-releasing hormone (GnRH) analogues are prepared into long-acting formulations that can significantly prolong the action time of these drugs, reducing medication frequency and increasing patient compliance. Such drugs are advantageous when treating acromegaly, gastroenteropancreatic neuroendocrine tumors (GEP-NETs), breast cancer, prostate cancer, and other diseases having a relatively long course. SSAs and GnRH analogues are two typical hormonal drugs, the long-acting formulations of which are essential in clinical practice. This review summarized the preparation methods and clinical application of long-acting formulations in cancer. Further, the action mechanism and new research of SSAs and GnRH analogues were discussed, and suggestions related to the development of long-acting SSAs and GnRH analogues were provided.

Intra-articular injection of loaded sPL sustained-release microspheres inhibits osteoarthritis and promotes cartilaginous repairs

BACKGROUND

Osteoarthritis is a chronic inflammatory disease of the joints associated with significant morbidity and lower quality of life. Current treatment strategies focus on reducing cartilage degeneration but fail to restore their proliferative ability. Super-activated platelet lysate (sPL) is an enhanced form of platelet-rich plasma that can be easily inactivated. The purpose of this study is to evaluate whether sPL-loaded PLGA/chitosan/gelatin microspheres can prevent and treat osteoarthritis.

METHODS

Features of biological microspheres were detected by SEM and ELISA. Osteoarthritis chondrocytes were co-cultured with hydrogel loaded with sPL. The effect of biological microspheres on chondrocyte proliferation was evaluated using a CCK-8 cell proliferation test. Cell morphology and cell necrosis were measured with a microscope. The gene expression levels of cartilage-related markers type 2 collagen, aggrecan (ACAN), and SRY type high mobility group box-9 (SOX9) were determined by real-time quantitative polymerase chain reaction (Rt-PCR). A rat osteoarthritis model was established. Micro-CT was used to characterize cartilaginous changes after the injection of biological microspheres. Histopathological HE staining, Safranin-O Fast Green staining and staining scores, type II collagen staining, and proteoglycan staining were used to evaluate the degree of cartilaginous repair.

RESULTS

Biological microspheres were able to continuously release biological factors. Exposure to loading sPL microspheres significantly increased chondrocyte proliferation, reduced cell necrosis, and increased the expression of cartilage markers type 2 collagen, ACAN, and SOX9 in osteoarthritic chondrocytes. In vivo experiments found that biological microspheres also smoothen cartilage surfaces, promote the expression of proteoglycan and type 2 collagen while also increasing cartilaginous integrity as evaluated using Safranin-O Fast Green staining.

CONCLUSIONS

PLGA/chitosan/gelatin hydrogel loaded with sPL is a promising tool for effective and non-invasive articular cartilage repair in osteoarthritis. Biological microspheres loaded with sPL release various biological factors to promote chondrocyte proliferation and upregulate chondrocyte functionalization genes (SOX9, CoX II, ACAN), leading to an overall enhanced cartilaginous matrix.

siRNA Nanoparticle Targeting PD-L1 Activates Tumor Immunity and Abrogates Pancreatic Cancer Growth in Humanized Preclinical Model

Pancreatic cancer is characterized by late detection, frequent drug resistance, and a highly metastatic nature, leading to poor prognosis. Antibody-based immunotherapy showed limited success for pancreatic cancer, partly owing to the low delivery rate of the drug into the tumor. Herein, we describe a poly(lactic-co-glycolic acid;PLGA)-based siRNA nanoparticle targeting PD-L1 (siPD-L1@PLGA). The siPD-L1@PLGA exhibited efficient knockdown of PD-L1 in cancer cells, without affecting the cell viability up to 6 mg/mL. Further, 99.2% of PDAC cells uptake the nanoparticle and successfully blocked the IFN-gamma-mediated PD-L1 induction. Consistently, the siPD-L1@PLGA sensitized cancer cells to antigen-specific immune cells, as exemplified by Ovalbumin-targeting T cells. To evaluate its efficacy in vivo, we adopted a pancreatic PDX model in humanized mice, generated by grafting CD34+ hematopoeitic stem cells onto NSG mice. The siPD-L1@PLGA significantly suppressed pancreatic tumor growth in this model with upregulated IFN-gamma positive CD8 T cells, leading to more apoptotic tumor cells. Multiplex immunofluorescence analysis exhibited comparable immune cell compositions in control and siPD-L1@PLGA-treated tumors. However, we found higher Granzyme B expression in the siPD-L1@PLGA-treated tumors, suggesting higher activity of NK or cytotoxic T cells. Based on these results, we propose the application of siPD-L1@PLGA as an immunotherapeutic agent for pancreatic cancer.

PLGA/PLA-Based Long-Acting Injectable Depot Microspheres in Clinical Use: Production and Characterization Overview for Protein/Peptide Delivery

Over the past few decades, long acting injectable (LAI) depots of polylactide-co-glycolide (PLGA) or polylactic acid (PLA) based microspheres have been developed for controlled drug delivery to reduce dosing frequency and to improve the therapeutic effects. Biopharmaceuticals such as proteins and peptides are encapsulated in the microspheres to increase their bioavailability and provide a long release period (days or months) with constant drug plasma concentration. The biodegradable and biocompatible properties of PLGA/PLA polymers, including but not limited to molecular weight, end group, lactide to glycolide ratio, and minor manufacturing changes, could greatly affect the quality attributes of microsphere formulations such as release profile, size, encapsulation efficiency, and bioactivity of biopharmaceuticals. Besides, the encapsulated proteins/peptides are susceptible to harsh processing conditions associated with microsphere fabrication methods, including exposure to organic solvent, shear stress, and temperature fluctuations. The protein/peptide containing LAI microspheres in clinical use is typically prepared by double emulsion, coacervation, and spray drying techniques. The purpose of this review is to provide an overview of the formulation attributes and conventional manufacturing techniques of LAI microspheres that are currently in clinical use for protein/peptides. Furthermore, the physicochemical characteristics of the microsphere formulations are deliberated.

Development of Arteannuin B Sustained-Release Microspheres for Anti-Tumor Therapy by Integrated Experimental and Molecular Modeling Approaches

Arteannuin B (AB) has been found to demonstrate obvious anti-tumor activity. However, AB is not available for clinical use due to its very low solubility and very short half-life. This study aimed to develop AB long sustained-release microspheres (ABMs) to improve the feasibility of clinical applications. Firstly, AB-polylactic-co-glycolic acid (PLGA) microspheres were prepared by a single emulsification method. In vitro characterization studies showed that ABMs had a low burst release and stable in vitro release for up to one week. The particle size of microspheres was 69.10 μm (D50). The drug loading is 37.8%, and the encapsulation rate is 85%. Moreover, molecular dynamics modeling was firstly used to simulate the preparation process of microspheres, which clearly indicated the molecular image of microspheres and provided in-depth insights for understanding several key preparation parameters. Next, in vivo pharmacokinetics (PK) study was carried out to evaluate its sustained release effect in Sprague-Dawley (SD) rats. Subsequently, the methyl thiazolyl tetrazolium (MTT) method with human lung cancer cells (A549) was used to evaluate the in vitro efficacy of ABMs, which showed the IC50 of ABMs (3.82 μM) to be lower than that of AB (16.03 μM) at day four. Finally, in vivo anti-tumor activity and basic toxicity studies were performed on BALB/c nude mice by subcutaneous injection once a week, four times in total. The relative tumor proliferation rate T/C of AMBs was lower than 40% and lasted for 21 days after administration. The organ index, organ staining, and tumor cell staining indicated the excellent safety of ABMs than Cis-platinum. In summary, the ABMs were successfully developed and evaluated with a low burst release and a stable release within a week. Molecular dynamics modeling was firstly applied to investigate the molecular mechanism of the microsphere preparation. Moreover, the ABMs possess excellent in vitro and in vivo anti-tumor activity and low toxicity, showing great potential for clinical applications.

Particle engineering principles and technologies for pharmaceutical biologics

The global market of pharmaceutical biologics has expanded significantly during the last few decades. Currently, pharmaceutical biologic products constitute an indispensable part of the modern medicines. Most pharmaceutical biologic products are injections either in the forms of solutions or lyophilized powders because of their low oral bioavailability. There are certain pharmaceutical biologic entities formulated into particulate delivery systems for the administration via non-invasive routes or to achieve prolonged pharmaceutical actions to reduce the frequency of injections. It has been well documented that the design of nano- and microparticles via various particle engineering technologies could render pharmaceutical biologics with certain benefits including improved stability, enhanced intracellular uptake, prolonged pharmacological effect, enhanced bioavailability, reduced side effects, and improved patient compliance. Herein, we review the principles of the particle engineering technologies based on bottom-up approach and present the important formulation and process parameters that influence the critical quality attributes with some mathematical models. Subsequently, various nano- and microparticle engineering technologies used to formulate or process pharmaceutical biologic entities are reviewed. Lastly, an array of commercialized products of pharmaceutical biologics accomplished based on various particle engineering technologies are presented and the challenges in the development of particulate delivery systems for pharmaceutical biologics are discussed.

Employing siRNA tool and its delivery platforms in suppressing cisplatin resistance: Approaching to a new era of cancer chemotherapy

Although chemotherapy is a first option in treatment of cancer patients, drug resistance has led to its failure, requiring strategies to overcome it. Cancer cells are capable of switching among molecular pathways to ensure their proliferation and metastasis, leading to their resistance to chemotherapy. The molecular pathways and mechanisms that are responsible for cancer progression and growth, can be negatively affected for providing chemosensitivity. Small interfering RNA (siRNA) is a powerful tool extensively applied in cancer therapy in both pre-clinical (in vitro and in vivo) and clinical studies because of its potential in suppressing tumor-promoting factors. As such oncogene pathways account for cisplatin (CP) resistance, their targeting by siRNA plays an important role in reversing chemoresistance. In the present review, application of siRNA for suppressing CP resistance is discussed. The first priority of using siRNA is sensitizing cancer cells to CP-mediated apoptosis via down-regulating survivin, ATG7, Bcl-2, Bcl-xl, and XIAP. The cancer stem cell properties and related molecular pathways including ID1, Oct-4 and nanog are inhibited by siRNA in CP sensitivity. Cell cycle arrest and enhanced accumulation of CP in cancer cells can be obtained using siRNA. In overcoming siRNA challenges such as off-targeting feature and degradation, carriers including nanoparticles and biological carriers have been applied. These carriers are important in enhancing cellular accumulation of siRNA, elevating gene silencing efficacy and reversing CP resistance.

A Lipid-Based Depot Formulation with a Novel Non-lamellar Liquid Crystal Forming Lipid

PURPOSE

Non-lamellar liquid crystal (NLLC)-forming lipids have gained attention as a novel component because of their ability to self-assemble upon contact with body fluids. In this study, a novel NLLC-forming lipid, mono-O-(5, 9, 13-trimethyl-4-tetradecenyl) glycerol ester (C17MGE), and a model drug with a middle molecule weight, leuprolide acetate (LA), were used to confirm the usefulness of C17MGE as an excipient for depot formulations with sustained release properties.

METHODS

A self-constructed depot formulation was prepared by mixing C17MGE and different types of phospholipids. The constructed NLLC structure was evaluated using small angle X-ray analysis and cryo-transmission electron microscopy. In vitro release and blood concentration profiles of LA were investigated.

RESULTS

The NLLC structure was confirmed by small angle X-ray analysis. LA release was able to be modified by adding different ratios of various phospholipids to C17MGE. Formulations containing 1, 2-dioleoyl-sn-glycero-3-phosphoglycerol sodium salt with a mixing ratio of 12% or 24% (MDOPG12 or MDOPG24, respectively) exhibited sustained release profiles of LA. In addition, the blood concentration of LA was detected over 21 days or more after administration of MDOPG12, and the absolute bioavailability was calculated to be about 100%.

CONCLUSIONS

A depot formulation using C17MGE was useful to achieve sustained release of LA.

Porous Core/Dense Shell PLA Microspheres Embedded with High Drug Loading of Bupivacaine Crystals for Injectable Prolonged Release

Objective of the study was to design an injectable microsphere preparation with high drug loading of bupivacaine for prolonged release and local anesthetic. PLA or PLGA was used as the biodegradable matrix material to fabricate microspheres with the o/w emulsification-solvent evaporation method. The characterization of bupivacaine microspheres was observed by SEM, DSC, and XRPD. The microsphere preparation and extended drug release, as well as the plasma drug concentration and sciatic nerve blockade after injection of the microsphere formulation to rats were investigated. High drug-loading microspheres of more than 70% were successfully obtained with extended drug release over 5 days in vitro depending on the type of matrix and the feed ratio of drug to polymer. SEM, DSC, and XRPD results verified a novel microsphere structure characterized as the porous core composed of PLA material and form II bupivacaine crystals and dense shell formed of PLA layer. The mechanism that bupivacaine was dissolved inside the microsphere and diffused across the dense shell was suggested for drug release in vitro. The optimized PLA microsphere formulation showed low and steady plasma drug concentration over 5 days and prolonged duration of sensory and motor blockade of sciatic nerve lasted more than 3 days. Results indicated that the porous core-shell structure of PLA microsphere formulation would provide enormous potential as an injectable depot for locally prolonged delivery of bupivacaine and control of postoperative pain.

Interfacial tension effects on the properties of PLGA microparticles

Many types of long-acting injectables, including in situ forming implants, preformed implants, and polymeric microparticles, have been developed and ultimately benefited numerous patients. The advantages of using long-acting injectables include greater patient compliance and more steady state drug plasma levels for weeks and months. However, the development of long-acting polymeric microparticles has been hampered by the lack of understanding of the microparticle formation process, and thus, control of the process. Of the many parameters critical to the reproducible preparation of microparticles, the interfacial tension (IFT) effect is an important factor throughout the process. It may influence the droplet formation, solvent extraction, and drug distribution in the polymer matrix, and ultimately drug release kinetics from the microparticles. This mini-review is focused on the IFT effects on drug-loaded poly(lactic-co-glycolic acid) (PLGA) microparticles.

Just how prevalent are peptide therapeutic products? A critical review

How prevalent are peptide therapeutic products? How innovative are the formulations used to deliver peptides? This review provides a critical analysis of therapeutic peptide products and the formulations approved by the United States Food and Drug administration (FDA), the European Medicines Agency (EMA), and the Japanese Pharmaceuticals and Medical Devices Agency (PMDA). This review also provides an in-depth analysis of dosage forms and administration routes for delivering peptide therapeutics, including injectables, oral dosage forms, and other routes of administration. We discuss the function of excipients in parenteral formulations in detail, since most peptide therapeutics are parenterally administered. We provide case studies of alternate delivery routes and dosage forms. Based on our analysis, therapeutic peptides administered as injectables remain the most commonly used dosage forms, particularly in the form of subcutaneous, intravenous, or intramuscular injections. In addition, therapeutic peptides are formulated to achieve prolonged release, often through the use of polymer carriers. The limited number of oral therapeutic peptide products and their poor absorption and subsequent low bioavailability indicate a need for new technologies to broaden the formulation design space. Therapeutic peptide products may also be delivered through other administration routes, including intranasal, implant, and sublingual routes. Therefore, an in-depth understanding of how therapeutic peptides are now formulated and administered is essential to improve peptide delivery, improve patient compliance, and reduce the healthcare burden for these crucial therapeutic agents.

Assessment of Residual Solvent and Drug in PLGA Microspheres by Derivative Thermogravimetry

Thermogravimetry does not give specific information on residual organic solvents in polymeric matrices unless it is hyphenated with the so-called evolved gas analysis. The purpose of this study was to apply, for the first time, derivative thermogravimetry (DTG) to characterize a residual solvent and a drug in poly-d,l-lactide-co-glycolide (PLGA) microspheres. Ethyl formate, an ICH class 3 solvent, was used to encapsulate progesterone into microspheres. DTG provided a distinct peak, displaying the onset and end temperatures at which ethyl formate started to evolve from to where it completely escaped out of the microspheres. DTG also gave the area and height of the solvent peak, as well as the temperature of the highest mass change rate of the microspheres. These derivative parameters allowed for the measurement of the amount of residual ethyl formate in the microspheres. Interestingly, progesterone affected not only the residual solvent amount but also these derivative parameters. Another intriguing finding was that there was a linear relationship between progesterone content and the peak height of ethyl formate. The residual solvent data calculated by DTG were quite comparable to those measured by gas chromatography. In summary, DTG could be an efficient and practical quality control tool to evaluate residual solvents and drugs in various polymeric matrices.

Intracellular delivery of a peptide nucleic acid-based hybrid of an autophagy inducing peptide with a cell-penetrating peptide

Development of an intracellular delivery method for functional peptides via cell-penetrating peptides (CPPs) expands peptide use in basic research and therapeutic applications. Although direct conjugation of a functional peptide with a CPP is the simplest method for delivery, this method has not always been reliable. CPPs usually contain several positively charged amino acids that potentially interact non-specifically with negatively charged molecules in cells and subsequently interfere with conjugated functional peptide function. Here we demonstrate a new intracellular delivery method for peptides in which a functional peptide is released from a positively charged CPP via peptide nucleic acids (PNAs). We prepared an 8-mer PNA conjugated to octa-arginine in tandem (PNA1-CPP) and linked its complementary PNA to an autophagy inducing peptide (PNA2-AIP) by solid-phase peptide synthesis. PNA1-CPP and PNA2-AIP formed a 1 : 1 hybrid via PNA1/PNA2 interaction, thereby indirectly but stably connecting the AIP to the CPP. PNA2-AIP was successfully delivered into cells in a hybrid formation-dependent manner and at least some portion of the PNA1-CPP/PNA2-AIP hybrids dissociated into PNA2-AIP and PNA1-CPP inside the cells. Notably, PNA2-AIP delivered to cells induced more autophagy than AIP directly conjugated to CPP (CPP-AIP). Further, the PNA hybrid did not induce significant cell death. These findings indicate that the PNA1/PNA2 hybrid can function as a molecular glue enabling the delivery of functional peptides into cells.

Quality by design thinking in the development of long-acting injectable PLGA/PLA-based microspheres for peptide and protein drug delivery

Adopting the Quality by Design (QbD) approach in the drug development process has transformed from "nice-to-do" into a crucial and required part of the development, ensuring the quality of pharmaceutical products throughout their whole life cycles. This review is discussing the implementation of the QbD thinking into the production of long-acting injectable (LAI) PLGA/PLA-based microspheres for the therapeutic peptide and protein drug delivery. Various key elements of the QbD approaches are initially elaborated using Bydureon®, a commercial product of LAI PLGA/PLA-based microspheres, as a classical example. Subsequently, the factors influencing the release patterns and the stability of the peptide and protein drugs are discussed. This is followed by a summary of the state-of-the-art of manufacturing LAI PLGA/PLA-based microspheres and the related critical process parameters (CPPs). Finally, a landscape of generic product development of LAI PLGA/PLA-based microspheres is reviewed including some major challenges in the field.

Microencapsulation of luteinizing hormone-releasing hormone agonist in poly (lactic-co-glycolic acid) microspheres by spray-drying

A spray drying technique was developed to prepare injectable and biodegradable poly(lactic-co-glycolic acid) (PLGA) microspheres encapsulating a model luteinizing hormone-releasing hormone agonist (LHRHa)-based peptide, leuprolide. Various spray drying parameters were evaluated to prepare 1-month controlled release formulations with a similar composition to the commercial Lupron Depot® (LD). A single water-in-oil emulsion of aqueous leuprolide/gelatin solution in PLGA 75/25 acid capped (13 kDa Mw) dissolved in methylene chloride (DCM) was spray-dried before washing the microspheres in cold ddH2O and freeze-drying. The spray-drying microencapsulation was characterized by: particle size/distribution (span), morphology, drug/gelatin loading, encapsulation efficiency, and residual DCM and water content. Long-term release was tested over 9 weeks in PBS + 0.02% Tween 80 + 0.02% sodium azide pH 7.4 (PBST) at 37 °C. Several physical-chemical parameters were monitored simultaneously for selected formulations, including: water uptake, mass loss, dry and hydrated glass transition temperature, to help understand the related long-term release profiles and explore the underlying controlled-release mechanisms. Compared with the commercial LD microspheres, some of the in-house spray-dried microspheres presented highly similar or even improved long-term release profiles, providing viable long-acting release (LAR) alternatives to the LD. The in vitro release mechanism of the peptide was shown to be controlled either by kinetics of polymer mass loss or by a second process, hypothesized to involve peptide desorption from the polymer. These data indicate spray drying can be optimized to prepare commercially relevant PLGA microsphere formulations for delivery of peptides, including the LHRHa, leuprolide.

Effect of Manufacturing Variables and Raw Materials on the Composition-Equivalent PLGA Microspheres for 1-Month Controlled Release of Leuprolide

The 1-month Lupron Depot (LD) is a 75/25 acid-capped poly(lactic-co-glycolic acid) (PLGA) microsphere product encapsulating water-soluble leuprolide acetate with no generic products available in the U.S. Composition-equivalent PLGA microsphere formulations to the LD as a function of raw material and manufacturing variables were developed by using the solvent evaporation encapsulation method. The following variables were adjusted: polymer supplier/polymerization type, gelatin supplier/bloom number, polymer concentration, first homogenization speed and time, volume of primary water phase, second homogenization time, volume of secondary water phase, and stirring rate. The loading and encapsulation efficiency (EE) of leuprolide and gelatin were determined to identify a large number of composition-equivalent formulations within a ±10% specification of the LD. Key physical-chemical properties of the formulations (e.g., morphology, particle size distribution, glass transition temperature (T_g), residual moisture and solvent, and porosity) were characterized to determine the effect of manufacturing variables on the product attributes. The EE of gelatin across all formulations prepared (101 ± 1%) was observed to be much higher than the EE of leuprolide (57 ± 1%). Judicious adjustment of polymer concentration, second homogenization time, and volume of second water phase was key to achieving high EE of leuprolide, although EE higher than 70% was not easily achievable owing to the difficulty of emulsifying highly viscous primary emulsion into homogeneous small droplets that could prevent peptide loss during the second homogenization under the conditions and equipment used. The in vitro release kinetics of the formulations was highly similar to the LD in a zero-order manner after ∼20% initial burst release, indicating a critical role of the composition on peptide release in this formulation. The characterization of composition-equivalent formulations described here could be useful for further development of generic leuprolide PLGA microspheres and for guiding decisions on the influence of process variables on product physicochemical attributes and release performance.

A method of elevated temperatures coupled with magnetic stirring to predict real time release from long acting progesterone PLGA microspheres

The object of the study was to develop a quick and reproducible accelerated in vitro release method to predict and deduce the function of the real time (37 °C) release for long acting PLGA microspheres. The method could be described in several steps. First, the release of the microspheres were studied using the sample and separate method at 37 °C with normal orbital shaking and elevated temperatures with magnetic stirring to further accelerate the release. Second, the most similar profile at elevated temperatures with the real time release was chosen with the help of the n value in the fitted Korsmeyer-Peppas Function. Third, the Weibull function and conversion ratio were used to deduce the function of real time release according to the chosen profile at elevated temperatures. The key point in this study was to provide a quick and precise method to predict the real time release for long acting progesterone PLGA microspheres. So the elevated temperatures coupled with magnetic stirring were used to accelerate the release further, and when there have many similar release profiles with the real time release at elevated temperatures, releasing time at elevated temperatures and the R2 of the final deduced function will be used to help choosing the most similar release profile with the real time release. Four different types of progesterone PLGA microspheres were used to verify the method, and all the deduced function correlated well with the real time releases, for R 2  = 0.9912, 0.9781, 0.9918 and 0.9972, respectively.

Separation and identification of acylated leuprorelin inside PLGA microspheres

Studies have shown that the N-terminus and lysine side residue of peptides are prone to acylation in poly(d,l-lactide-co-glycolide) (PLGA) microspheres. Peptides such as leuprorelin lack a free N-terminus or lysine and only contain serine, arginine, and tyrosine as nucleophilic residues. The purpose of this study was to detect potential acylation impurities and determine their corresponding acylation sites in commercial leuprorelin-loaded PLGA microspheres. Commercial samples from three vendors were selected as targets for our study. The high-performance liquid chromatography (HPLC) conditions of the European Pharmacopoeia were used to separate and collect impurities. HPLC-tandem mass spectrometry (HPLC-MS/MS) was applied to confirm both the structure and acylation sites of the impurities. Our study demonstrated that impurities originating from both degradation of microspheres and synthesis of leuprorelin were well separated and identified using these HPLC conditions. HPLC-MS/MS analysis of acylated leuprorelin showed that diglycoyl, lactoyl-glycoyl, dilactoyl, and monolactoyl groups were conjugated to serine in leuprorelin-loaded PLGA microspheres. This is the first report showing serine to be the acylation site in peptide-loaded PLGA microspheres. Separation and identification of acylated leuprorelin derivatives will assist in minimising acylation and guiding the development of quality control for commercial leuprorelin-loaded PLGA microspheres.

Butyl stearate prolongs the drug release period of isoperidone‑loaded poly (lactic‑co‑glycolic acid) microspheres: In vitro and in vivo investigation

The present study aimed to investigate the effects of butyl stearate on t-butoxyl paliperidone derivative (isoperidone)-loaded poly(lactide-co-glycolide) (PLGA) microspheres. The mechanism of drug release rate delay by butyl stearate was examined by accelerated testing, morphological observation, thermal and fluorescence analyses. In vivo pharmacokinetic study was conducted on female beagle dogs. Spherical microspheres with smooth surfaces, small internal pores and shell structures were initially prepared. It was found that 3% (w/w) butyl stearate prolonged the in vitro drug release period from 46 to 82 days, and in vivo release period from 20 to 27 days. Furthermore, the results demonstrated that the green fluorescence imaging of isoperidone approaching the cores of microspheres with 3% butyl stearate was brighter than in microspheres without additives. In conclusion, it was shown that butyl stearate affected the microsphere structure, isoperidone microsphere distribution and isoperidone crystallinity. The results of the present study thus provide a potential method to develop sustained-release preparations.

Construction of Lambda-Cyhalothrin Nano-Delivery System with a High Loading Content and Controlled-Release Property

Traditional pesticide formulations are limited by large organic solvent consumption, poor dispersibility, and poor foliar adhesion, resulting in low effective pesticides utilization and environmental pollution. To prolong the foliar pesticide retention and release time, a high lambda-cyhalothrin (LC)-loaded nano-delivery system was constructed, using polylactic acid (PLA) as a carrier through a solvent evaporation method. The obtained results showed that the stabilizer concentration, water⁻oil ratio, and carrier content exert a major influence on the LC loading, particle size, and size distribution. The prepared LC/PLA nanoparticles have a uniform spherical shape with a smooth surface. The size of the nanoparticles was less than 200 nm, and the LC loading capacity reached up to 46.6 wt.%, with a high encapsulation efficiency (exceeding 90%). Adjustment of the shear and ultrasonic time changed the size of the nanoparticles. Significant differences were found in the sustained release properties of LC/PLA nanoparticles with different LC loadings. The foliage adhesion of the LC nano-delivery system far exceeded that of the commercial LC formulation due to a low surface tension and a low contact angle, this foliage adhesion would greatly help to improve pesticide utilization.

Preparation and physicochemical characterization of T-OA PLGA microspheres

As the carrier of water-insoluble drugs, microspheres can play a role in increasing solubility and delaying releasing essence. The objective of this study was to improve the solubility and to delay the release of a newly discovered antitumor compound 3β-hydroxyolea-12-en-28-oic acid-3, 5, 6-trimethylpyrazin-2-methyl ester (T-OA). Early-stage preparation discovery concept (EPDC) was employed in the present study. The preparation, physicochemical characterization, and drug release properties of PLGA microspheres were evaluated. T-OA-loaded PLGA microspheres were prepared by an oil-in-water (O/W) emulsification solvent evaporation method. Characterization and release behaviors of the T-OA PLGA microspheres were evaluated by X-ray diffract (XRD), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and high performance liquid chromatography (HPLC). The results demonstrated that T-OA-loaded PLGA microspheres could be successfully obtained through solvent evaporation method with appropriate morphologic characteristics and high encapsulation efficiency. The XRD analysis showed that T-OA would be either molecularly dispersed in the polymer or distributed in an amorphous form. The DSC and FTIR analysis proved that there were interactions between T-OA and PLGA polymer. SEM observations displayed the morphology of the microspheres was homogeneous and the majority of the spheres ranged between 50 and 150 μm. The drug release behavior of the microspheres in the phosphate buffered saline medium exhibited a sustained release and the duration of the release lasted for more than 23 days, which was fit with zero-order release pattern with r² = 0.9947. In conclusion, TOA-loaded PLGA microspheres might hold great promise for using as a drug-delivery system in biomedical applications.

Reverse Engineering the 1-Month Lupron Depot®

The 1-month Lupron Depot® (LD) encapsulating water-soluble leuprolide in poly(lactic-co-glycolic acid) (PLGA) microspheres is a benchmark product upon which modern long-acting release products are often compared. Despite expiration of patent coverage, no generic product for the LD has been approved in the USA, likely due to the complexity of components and manufacturing processes involved in the product. Here, we describe the reverse engineering of the LD composition and important product attributes. Specific attributes analyzed for microspheres were as follows: leuprolide content by three methods; gelatin content, type, and molecular weight distribution; PLGA content, lactic acid/glycolic acid ratio, and molecular weight distribution; mannitol content; in vitro drug release; residual solvent and moisture content; particle size distribution and morphology; and glass transition temperature. For the diluent, composition, viscosity, and specific gravity were analyzed. Analyzed contents of the formulation and the determined PLGA characteristics matched well with the official numbers stated in the package insert and those found in literature, respectively. The gelatin was identified as type B consistent with ~ 300 bloom. The 11-μm volume-median microspheres in the LD slowly released the drug in vitro in a zero-order manner after ~ 23% initial burst release. Very low content of residual moisture (< 0.5%) and methylene chloride (< 1 ppm) in the product indicates in-water drying is capable of removing solvents to extremely low levels during manufacturing. The rigorous approach of reverse engineering described here may be useful for development of generic leuprolide-PLGA microspheres as well as other new and generic PLGA microsphere formulations.

Breeding in the fat-tailed dunnart following ovarian suppression with the gonadotrophin-releasing hormone agonist Lucrin® Depot

Lucrin Depot (AbbVie), a 1-month microsphere gonadotrophin-releasing hormone (GnRH) agonist preparation, was investigated as a potential agent to synchronise cycling in the fat-tailed dunnart (Sminthopsis crassicaudata). Forty-eight randomly selected females were treated with 5 or 10mgkg-1 Lucrin Depot (n=24 per dose). Eighteen females per treatment had their reproductive activity scored at 4, 8, 12 and 16 weeks using two ovarian (Graafian follicle and corpus luteum status) and two reproductive tract (uterine and vaginal muscularity and vascularity) parameters that formed a reproductive activity score. Six females per treatment were paired with a male at 4 weeks. Fertility was assessed between 8 and 16 weeks by pouch check, and thereafter by dissection. The effects of the 5 and 10mgkg-1 doses were statistically equivalent. Females showed suppression at 4-8 weeks, an increase in reproductive activity at 8-12 weeks and all were cycling normally at 16 weeks. Six pouch young were born at 12 weeks to two females treated with the 5mgkg-1 dose. Nine embryos were recovered at 16 weeks from two females treated with the 10mgkg-1 dose. In conclusion, Lucrin Depot can suppress breeding, and fertile mating can occur in subsequent cycles in the dunnart. There is potential for Lucrin Depot to be used as an assisted breeding tool, but it may need to be combined with ovarian stimulation treatment to achieve practical levels of synchronisation in the fat-tailed dunnart.

PLGA nanoparticles co-delivering MDR1 and BCL2 siRNA for overcoming resistance of paclitaxel and cisplatin in recurrent or advanced ovarian cancer

The inherent or acquired resistance to paclitaxel and cisplatin, which are commonly used chemotherapeutic agents for ovarian cancer treatment, remains an important issue in chemotherapy of multidrug resistant ovarian cancer. Currently, it is still challenging to deal with the recurrent or advanced stage ovarian cancer. When drug efflux and anti-apoptotic pathways are highly interdependent and also involved in developing the resistance of multidrug resistant ovarian cancer, simultaneous inhibition of both pathways represents the potential targets to enhance the efficacy of chemotherapy. Here, we introduce PLGA nanoparticles system as a “dual RNAi delivery system” to contain both MDR1 and BCL2 siRNA, which is designed for simultaneous inhibition of drug efflux and cell death defense pathways. In the present studies, siRNA-loaded PLGA nanoparticles efficiently elicit the simultaneous suppression of both genes, which consequently shows more enhanced drug-sensitivity than sole suppression of drug efflux or anti-apoptosis in the resistant ovarian cancer cells, owing to the interdependence of both pathways. Our siRNA-loaded PLGA nanoparticles for co-delivering MDR1 and BCL2 siRNA provide an efficient combination therapy strategy to overcome the chemoresistance of paclitaxel and cisplatin on the paclitaxel-resistant SKOV3-TR and cisplatin-resistant A2780-CP20 ovarian cancer respectively.

In vivo release of peptide-loaded PLGA microspheres assessed through deconvolution coupled with mechanistic approach

In this study, a reevaluation of the in vivo release phases from long-release PLGA-based microspheres is presented, leading to a better characterization of the plasma concentrations/time profile. Microspheres were designed for intramuscular injection releasing a cyclic somatostatin analog over 70 days. Clinical study was performed in 64 healthy subjects receiving a subcutaneous dose of an immediate release solution as reference formulation and an intramuscular injection of microspheres as test formulation. The in vivo input curve was obtained by numerical deconvolution. Results showed that double Weibull function could not fit correctly the tri-phasic (burst, lag, and erosion) in vivo input profile typical for PLGA-based formulations, due to a change in the drug release trend in the terminal phase. Triple Weibull showed a significant improvement in the curve fitting, each term being assigned to one of the following phases: initial (burst/lag), erosion, and terminal phase of drug release. The existence of the additional terminal phase was confirmed by a mechanistic approach as well, which denoted that this phase was, most probably, a consequence of the release mechanism change from erosion to diffusion controlled. The same model demonstrated that the burst release was as well influenced by the polymer swelling, while currently existing theories state that the burst phase is mainly determined by the dissolution of immediately available drug substance and diffusion through surface related pores.

Recent advances in tools and technologies for monitoring and controlling ovarian activity in marsupials

Components of assisted reproduction technologies (ART), such as sperm cryopreservation, artificial insemination, superovulation and pouch young surrogacy, have been developed for a range of Australian and American marsupials. However, methods to effectively control ovarian function, arguably the key limiting factors in applying and integrating ART as a practical tool in conservation management, remain poorly developed. This is largely due to unique characteristics of the marsupial corpus luteum and its failure to respond to agents used to synchronize ovarian function in eutherian mammals. This paper presents an overview of relevant aspects of marsupial reproductive biology across marsupial taxonomic groups including information on the long-established technique of removal of suckling young to activate ovarian cycles. Ovarian monitoring tools for marsupials are reviewed and their usefulness for ART assessed (laparotomy, hormone cycling, vaginal cytology, laparoscopy and ultrasonography). We also discuss promising recent work examining the potential of manipulating hypothalamic-pituitary function using GnRH agonists and antagonists as the basis of ovarian control (female synchronization) strategies.