Biodegradation of oil wastewater by free and immobilized Yarrowia lipolytica W29

Constructing a composite microfiltration carbon membrane by TiO2 and Fe2O3 for efficient separation of oil-water emulsions

Membrane-based separation technology has attracted enormous attention for oil/water emulsion treatment. Here, composite microfiltration carbon membranes (MCMs) were prepared from the precursor of phenolic resin doping with TiO2 and Fe2O3 via the processes of stereotype and pyrolysis. The functional groups, thermal stability, porous structure, microstructure, morphology, and hydrophilicity of the membrane samples were analyzed by Fourier-transform infrared spectroscopy, thermogravimetric analysis, bubble pressure method, X-ray diffraction, scanning electron microscope, and water contact angle, respectively. The effect of dopant amount on the separation performance of MCMs was investigated. The results show that a mixed matrix system is constructed by TiO2 and Fe2O3 in MCMs, which is beneficial for further optimizing the pore size, porosity, and hydrophilicity of MCMs for oily wastewater treatment by varying the dopant amount. The maximum oil rejections are achieved at 98.9% and 99.6% for MCMs with a dopant content of TiO2 and Fe2O3 at 25%, respectively. In brief, this study offers an attractive strategy for improving the separation performance of MCMs for oily wastewater.

Water Quality Assessment and Characterization of Rivers in Pasir Gudang, Johor via Multivariate Statistical Techniques

In Pasir Gudang, an accelerated industry-based economy has caused a tremendous increase and diversity of water contamination. The application of multivariate statistical techniques can identify factors that influence water systems and is a valuable tool for managing water resources. Therefore, this study presents spatial evaluation and the elucidation of inordinate complex data for 32 parameters from 25 sampling points spanning 20 rivers across Pasir Gudang, summing up to 1500 observations between 2015-2019. Hierarchical cluster analysis with the K-means method grouped the rivers into two main clusters, i.e., proportionately low polluted rivers for Cluster 1 (C1) and high polluted rivers for Cluster 2 (C2), based on the similitude of water quality profiles. The discriminant analysis applied to the cluster resulted in a data reduction from 32 to 7 parameters (Cl, Cd, S, OG, temperature, BOD, and pH) with a 99.5% correct categorization in spatial analysis. Hence, element complexity was reduced to a few criteria accountable for large water quality differences between C1 and C2. The principal component analysis produced 6 and 7 principal components after rotation for C1 and C2, respectively, where total variance was 62.48% and 66.85%. In addition, several sub-clusters were identified; two from C1 and three from C2, based on the principal contributing components. These results show that the functionality of multivariate techniques can be effectively used to identify spatial water characteristics and pollution sources. The outcomes of this study may benefit legislators in managing rivers within Pasir Gudang.

Prospects in the bioremediation of petroleum hydrocarbon contaminants from hypersaline environments: A review

Hypersaline environments are underappreciated and are frequently exposed to pollution from petroleum hydrocarbons. Unlike other environs, the high salinity conditions present are a deterrent to various remediation techniques. There is also production of hypersaline waters from oil-polluted ecosystems which contain toxic hydrophobic pollutants that are threat to public health, environmental protection, and sustainability. Currently, innovative advances are being proposed for the remediation of oil-contaminated hypersaline regions. Such advancements include the exploration and stimulation of native microbial communities capable of utilizing and degrading petroleum hydrocarbons. However, prevailing salinity in these environments is unfavourable for the growth of non-halophylic microorganisms, thus limiting effective bioremediation options. An in-depth understanding of the potentials of various remediation technologies of hydrocarbon-polluted hypersaline environments is lacking. Thus, we present an overview of petroleum hydrocarbon pollution in hypersaline ecosystems and discuss the challenges and prospects associated with several technologies that may be employed in remediation of hydrocarbon pollution in the presence of delimiting high salinities. The application of biological remediation technologies including the utilization of halophilic and halotolerant microorganisms is also discussed.

Synchronous degradation of phenol and aniline by Rhodococcus sp.strain PB-1entrapped in sodium alginate-bamboo charcoal-chitosan beads

The biodegradation of benzene series compounds is a difficult problem in environment pollution control, which is attributed to the deficiency of high efficiency bacteria and suitable embedding materials. In this study, the immobilized cells Rhodococcussp. strain PB-1 was used to synchronously biodegrade phenol and aniline by entrapped in sodium alginate (SA)-bamboo charcoal (BC)-chitosan acetate (CA) beads. The free cells of the strain PB-1 could completely degrade 1500 mg/L phenol or 800 mg/L aniline within 48 h, while the degradation rate of 2000 mg/L phenol and 1500 mg/L aniline was 35.76% and 68.06% at 72 h, respectively. The ortho-cleavage pathway was used to degrade phenol and aniline by strain PB-1. However, after entrapped with SA-BC-CA beads,the removal rate of 2000 mg/L phenol was 100% at 108 h, 1500 mg/L aniline was 100% at 62 h and 2000-3000 mg/L total toxic compounds was over 95% at 120 h. These beads could be used four times and were more effective than SA or SA-BC beads. The SA-BC-CA beads could remarkably improve the stability and degradation efficiency of strain PB-1, and thus provide a potential application in the removal of phenol and aniline in wastewater.

Preparation and application of embedded and immobilized Achromobacter sp. agent for effective removal of ammonia nitrogen from water

A novel wastewater-quality-improver, Sodium Alginate Embedded Microbe-treated Zeolite (SAEMZ), was proposed. The strains used are screened from black-odorous water and have high-efficiency NH₄⁺-N degradation performance. The Gram-positive bacteria, belonging to Achromobacter sp., was determined through the screening and identification for this strain, whose removal rate of NH₄⁺-N can reach 88.06%, to decrease the NH₄⁺-N concentration from 61.83 mg/L to 7.80 mg/L, and its optimal growth conditions are pH 7-8, rotation speed 150-210 r/min, temperature 25-35 °C. The SAEMZ's removal effect on NH₄⁺-N was considered in this research from aspects of reusability, storage stability, and the effects of dosage, coexisting ions, and wastewater's concentration. The increase of the SAEMZ's dosage effectively improved the NH₄⁺-N removal rate; Ca²⁺ in the solution promoted the NH₄⁺-N removal rate, while Mg²⁺ and Mn²⁺ inhibited it. Also, the NH₄⁺-N removal rate improved slightly with Fe²⁺ concentration's increase and then decreased significantly; with the increase of the wastewater dilution factor, the NH₄⁺-N removal rate showed an upward trend and with the increase of the SAEMZ's reuse times, it decreased. Therefore, recycle times should be controlled to less than 3 times in practical application; the SAEMZ still maintains its physiological stability, high mechanical strength, and good storage stability after being stored at 4 °C for 120 days.

Inner Surface Hydrophilic Modification of PVDF Membrane with Tea Polyphenols/Silica Composite Coating

The use of Polyvinylidene fluoride (PVDF) membranes is constrained in wastewater treatment because of their hydrophobic nature. Therefore, a large number of researchers have been working on the hydrophilic modification of their surfaces. In this work, a superhydrophilic tea polyphenols/silica composite coating was developed by a one-step process. The composite coating can achieve not only superhydrophilic modification of the surface, but also the inner surface of the porous PVDF membrane, which endows the modified membrane with excellent water permeability. The modified membrane possesses ultrahigh water flux (15,353 L·m⁻²·h⁻¹). Besides this, the modified membrane can realize a highly efficient separation of oil/water emulsions (above 96%).

Enhanced biodegradation of light crude oil by immobilized Bacillus licheniformis in fabricated alginate beads through electrospray technique

Petroleum contamination of marine environments due to exploitation and accidental spills causes serious harm to ecosystems. Bioremediation with immobilized microorganisms is an environmentally friendly and cost-effective emerging technology for treating oil-polluted environments. In this study, Bacillus licheniformis was entrapped in Ca alginate beads using the electrospray technique for light crude oil biodegradation. Three important process variables, including inoculum size (5-15% v/v), initial oil concentration (1500-3500 ppm), and NaCl concentration (0-30 g/L), were optimized to obtain the best response of crude oil removal using response surface methodology (RSM) and Box-Behnken design (BBD). The highest crude oil removal of 79.58% was obtained for 1500 ppm of crude oil after 14 days using immobilized cells, and it was lower for freely suspended cells (64.77%). Our result showed similar trends in the effect of variables on the oil biodegradation rate in both free cell (FC) and immobilized cell (IC) systems. However, according to the analysis of variance (ANOVA) results, the extent of the variables' effectiveness was different in FC and IC systems. In the immobilized cell system, all variables had a greater effect on the rate of light crude oil degradation. Moreover, to evaluate the effectiveness of free and immobilized B. licheniformis in bioremediation of an actual polluted site, the crude oil spill in natural seawater was investigated. The results suggested the stability of beads in the seawater, as well as high degradation of petroleum hydrocarbons by free and immobilized cells in the presence of indigenous microorganisms.

Significant enhancement of citric acid production by Yarrowia lipolytica immobilized in bacterial cellulose-based carrier

The aim of this study was to improve the yield of citric acid (CA), an industrially valuable metabolite, obtained during Yarrowia lipolytica yeast culturing. To this end, Y. lipolytica cells were immobilized on a novel bacterial cellulose (BC) based carrier and subjected to four subsequent cycles of fed-batch culturing. During the fermentation process, yeasts metabolic stability, glucose consumption and CA production were analyzed. The results of our study have shown that BC-immobilized yeasts utilized more glucose than free cells and that the metabolic activity of BC-immobilized cells and the resultant CA production remained on a stable level throughout 4 fermentation batches, while the drop in free cells' metabolic stability and the consequent drop in CA production was observed with each subsequent batch. Also, the overall concentration of CA product was higher in immobilized vs. free yeasts (121-129 g/L vs. 99-110 g/L, respectively). The presented results indicate that the application of a BC carrier for Y. lipolytica culturing correlates not only with a higher yield of CA product but also with more stable and repeatable conditions of the biotechnological fermentation process. The results obtained in this study may find multiple biotechnological applications in which immobilization of various types of cells is required.

Influence of illegal artisanal small-scale gold mining operations (galamsey) on oil and grease (O/G) concentrations in three hotspot assemblies of Western Region, Ghana

This study determined the contamination levels of oil and grease (O/G) across nine (9) galamsey operations under different environmental media (background soil, surface drainage, slurry/sludge and galamsey wastes) in three galamsey hotspot assemblies (Tarkwa Nsuaem, Amenfi East and Prestea Huni Valley) within the Western region of Ghana. Triplicate samples each of the four environmental media for the nine galamsey types (Washing Board, Washing Plant, Anwona, Dig and Wash, Dredging, Underground Abandoned Shaft, Underground Sample Pit, Chamfi and Mill House) were collected and analysed using n-hexane extractable materials in acidic medium by extraction and gravimetry to determine O/G concentrations. From the comparison of mean ranked concentration of O/G, using Kruskal-Wallis Test, the observed differences in the ranking was significant across all four media. The O/G concentrations for Anwona, Chamfi, Mill House, Washing Board and Washing Plant galamsey recorded exceedances when compared to the Ghana EPA Effluent Guideline Value of 100 mg/L for water and The New Dutch Lists' Target and Intervention Value of 50 mg/kg and 500 mg/kg for solid/semi-solid materials. Consistently and for all environmental media types, the levels of O/G across the galamsey types were in the descending order of: Washing Board, Chamfi, Anwona, Mill House, Washing Plant, Underground Sample Pit, River Dredging, Dig and Wash, Underground Abandoned Shaft and Control Sample (non-galamseyed areas). In general, the surface drainage medium was predominantly found to be the most impacted upon medium from hydrocarbons by seven of the nine galamsey operations (Washing Board, Anwona, Chamfi, Mill House, Dredging, Dig and Wash and Underground Sample Pit). This was followed by slurry/sludge, background soil and waste media in that order. Expectedly, there were no exceedances for the Reference or Control Samples (non-galamseyed areas).

Biodegradation of microcystin-RR and nutrient pollutants using Sphingopyxis sp. YF1 immobilized activated carbon fibers-sodium alginate

A novel biological material named activated carbon fibers-sodium alginate@Sphingopyxis sp. YF1 (ACF-SA@YF1) was synthesized for microcystin-RR (MC-RR) and nutrient pollutant degradation in eutrophic water. The synthesized biomaterial was characterized by scanning electron microscopy (SEM). Box-Behnken design and response surface methodology (RSM) were utilized for the optimization of conditions during the MC-RR degradation. The degradation of MC-RR and nutrient pollutants was dynamically detected. The results revealed that the optimal conditions were temperature 32.51 °C, pH 6.860, and inoculum 14.97%. The removal efficiency of MC-RR, nitrogen, phosphorus, and chemical oxygen demand were 0.76 μg/mL/h, 32.45%, 94.57%, and 64.07%, respectively. In addition, ACF-SA@YF1 also performed satisfactory cyclic stability, while the MC-RR removal efficiency was 70.38% after seven cycles and 78.54% of initial activity after 20 days of storage. Therefore, it is reasonable to believe that ACF-SA@YF1 is an effective material which has a great prospect in removing MC-RR and nutrients from freshwater ecosystems.

Bioremediation of palm oil mill effluent (POME) using indigenous Meyerozyma guilliermondii

Despite being a key Malaysian economic contributor, the oil palm industry generates a large quantity of environmental pollutant known as palm oil mill effluent (POME). Therefore, the need to remediate POME has drawn a mounting interest among environmental scientists. This study has pioneered the application of Meyerozyma guilliermondii with accession number (MH 374161) that was isolated indigenously in accessing its potential to degrade POME. This strain was able to treat POME in shake flask experiments under aerobic condition by utilising POME as a sole source of carbon. However, it has also been shown that the addition of suitable carbon and nitrogen sources has significantly improved the degradation potential of M. guilliermondii. The remediation of POME using this strain resulted in a substantial reduction of chemical oxygen demand (COD) of 72%, total nitrogen of 49.2% removal, ammonical nitrogen of 45.1% removal, total organic carbon of 46.6% removal, phosphate of 60.6% removal, and 92.4% removal of oil and grease after 7 days of treatment period. The strain also exhibited an extracellular lipase activity which promotes better wastewater treatment. Additionally, Fourier transform infrared spectroscopy (FTIR) and gas chromatography-mass spectrometry (GC-MS) analyses have specifically shown that M. guilliermondii strain can degrade hydrocarbons, fatty acids, and phenolic compounds present in the POME. Ultimately, this study has demonstrated that M. guilliermondii which was isolated indigenously exhibits an excellent degrading ability. Therefore, this strain is suitable to be employed in the remediation of POME, contributing to a safe discharge of the effluent into the environment.

New nano-biomaterials for the removal of malachite green from aqueous solution via a response surface methodology

The development of new biomaterials for the remove of organic contaminants from wastewater has attracted much attention over the few past years. One of the most cost-effective approaches is to produce new high value biomaterials from low value solid agricultural biowastes. In this work, sugarcane bagasse and agricultural waste rich in reducing sugars, acted as both a green bioreductant for graphene oxide (GO) and a sustainable supporter for the immobilization of Burkholderia cepacia. Therefore, this new biomaterial which contained both reduced graphene oxide (RGO) and Burkholderia cepacia, was cable of initial adsorption of malachite green (MG) and its subsequent biodegradation. After 60 h, immobilized Burkholderia cepacia degraded more MG (98.5%) than a cell cultured Burkholderia cepacia (87.7%) alone. Raman spectroscopy confirmed that GO was successfully reduced by bagasse and that consequently a composite (B-RGO) was prepared. SEM indicated that Burkholderia cepacia was well immobilized and kinetics studies showed that the adsorption of MG onto the developed composite fitted a pseudo-second order kinetics model (R² > 0.99). Biodegradation of MG, was confirmed by the detection of appropriate degradation products such as N, N-dimethylaniline and 4-(Dimethylamino) benzophenone using GC-MS, UV and FT-IR, and via best fit first-order biodegration kinetics. Furthermore, a response surface methodology (RSM) was applied to the removal process by varying four independent parameters using a Box-Behnken design (BBD). Optimum MG removal (99.3%) was achieved at 31.5 °C, with an initial MG concentration of 114.5 mg L^-1, initial pH of 5.85, and an adsorbent dosage of 0.11 g L ^-1. The excellent removal efficiency indicated that agricultural waste derived reduced graphene oxide bio-adsorbents have significant potential for the removal of dyes such as MG from industrial wastewaters.

Immobilization of Sphingomonas sp. GY2B in polyvinyl alcohol-alginate-kaolin beads for efficient degradation of phenol against unfavorable environmental factors

In this study, batch experiments were carried out to evaluate the biodegradation of phenol by Sphingomonas sp. GY2B, which were immobilized in polyvinyl alcohol (PVA)-sodium alginate-kaolin beads under different conditions. The optimal degradation performance was achieved by GY2B immobilized in beads containing 1.0% (w/v) of kaolin, 10% (w/v) of PVA, 0.3% (w/v) of sodium alginate, 10% (v/v) of biomass dosage, and exposed to an initial phenol concentration of 100 mg/L. The experimental results indicated that PVA-sodium alginate-kaolin beads can accelerate the degradation rate of phenol by reducing the degradation time and also improve degradation rate. The biodegradation rate of phenol by immobilized cells (16.79 ± 0.81 mg/(L·h)) was significantly higher than that of free cells (11.49 ± 1.29 mg/(L·h)) under the above optimal conditions. GY2B immobilized on beads was more competent than free GY2B in degradation under conditions with high phenol concentrations (up to 300 mg/L) and in strong acidic (pH = 1) and alkaline (pH = 12) environments. Higher phenol concentrations inhibit the biomass and reduce the biodegradation rate, while the lower biodegradation rate at low initial phenol concentrations is attributed to mass transfer limitations. The Haldane inhibitory model was in agreement with the experimental data well, revealing that phenol showed a considerable inhibitory effect on the biodegradation by Sphingomonas sp. GY2B, especially at concentrations higher than 90 mg/L. Intra-particle diffusion model analysis suggests that adsorption of phenol by immobilized beads was controlled by both rapid surface adsorption as well as pore diffusion mechanism. It's worth noting that the presence of 1 mg/L Cr(VI) enhanced the biodegradation of phenol by free cells, while Cr(VI) showed no obvious impact on the removal of phenol by immobilized cells. In addition, immobilized cells were reused 16 times and removed 99.5% phenol, and when stored at 4 °C for 90 days, more than 99% phenol was removed. These results showed that immobilized cells can significantly improve the microbial degradation performance, and protect microorganisms against unfavorable environment. It is implied that PVA -sodium alginate-kaolin beads have great potential to be applied in a practical and economical phenolic wastewater treatment system.

Diesel oil removal by Serratia sp. W4-01 immobilized in chitosan-activated carbon beads

Serratia sp. W4-01 was immobilized in chitosan-activated carbon beads and used for diesel oil removal. The type and concentration of chitosan, activated carbon content, and bead diameter were investigated as factors affecting diesel oil removal. The results showed that 2% (w/v) squid pen chitosan beads modified with 1% activated carbon (w/v) and with a 3-mm diameter had a good spherical shape and strength as well as diesel oil removal capability. The immobilized W4-01 cells removed more than 40% of diesel oil after 7 days when the initial diesel oil concentration was 100 to 400 mg L^-1, whereas 29-36% of diesel oil was removed after 14 days when the initial concentration was 800 to 1000 mg L^-1. Additionally, the immobilized cells maintained the ability to remove diesel oil over a pH range of 5-11. The addition of a biosurfactant increased the diesel oil removal from 62 to 75%. The reusability tests revealed that the ability of immobilized cells to remove diesel oil was enhanced after reuse, and 50-90% of diesel oil was removed during 2 to 12 reuse cycles. The stability and survival of W4-01 cells was confirmed by scanning electron microscopy and confocal laser scanning microscopy. The results of this study showed the potential use of W4-01 cells immobilized in chitosan-activated carbon beads for future applications in remediating diesel contamination.

Recent advances and industrial viewpoint for biological treatment of wastewaters by oleaginous microorganisms

Recently, technology of using oleaginous microorganisms for biological treatment of wastewaters has become one hot topic in biochemical and environmental engineering for its advantages such as easy for operation in basic bioreactor, having potential to produce valuable bio-products, efficient wastewaters treatment in short period, etc. To promote its industrialization, this article provides some comprehensive analysis of this technology such as its advances, issues, and outlook especially from industrial viewpoint. In detail, the types of wastewaters can be treated and the kinds of oleaginous microorganisms used for biological treatment are introduced, the potential of industrial application and issues (relatively low COD removal, low lipid yield, cost of operation, and lack of scale up application) of this technology are presented, and some critical outlook mainly on co-culture method, combination with other treatments, process controlling and adjusting are discussed systematically. By this article, some important information to develop this technology can be obtained.

Study on the biodegradation of crude oil by free and immobilized bacterial consortium in marine environment

Five strains of bacteria, namely, Exiguobacterium sp. ASW-1, Pseudomonas aeruginosa strain ASW-2, Alcaligenes sp. ASW-3, Alcaligenes sp. ASS-1, and Bacillus sp. ASS-2, were isolated from the Zhejiang coast in China. The mixed flora of the five strains performed well with degrading 75.1% crude oil (1%, w/v) in 7 days. The calcium alginate—activated carbon embedding carrier was used to immobilize bacterial consortium. Immobilized cells performed better than free ones in variations of environmental factors containing incubated temperature, initial pH, salinity of the medium and crude oil concentration. The degradation process of crude oil by immobilized bacteria was accelerated compared with that of the free ones. Bacterial consortium showed better performance on biodegradation of normal alkanes than that of PAHs. Improvement of immobilization on the biodegradation efficiency of normal alkanes (31.9%) was apparently high than that of PAHs (1.9%).

Eco-Friendly Superwetting Material for Highly Effective Separations of Oil/Water Mixtures and Oil-in-Water Emulsions

Because the treatment of oily wastewater, generated from many industrial processes, has become an increasing environmental concern, the search continues for simple, inexpensive, eco-friendly, and readily scalable processes for fabricating novel materials capable of effective oil/water separation. In this study we prepared an eco-friendly superhydrophilic and underwater superoleophobic polyvinylpyrrolidone (PVP)-modified cotton that mediated extremely efficient separations of mixtures of oil/water and oil/corrosive solutions. This PVP-modified cotton exhibited excellent antifouling properties and could be used to separate oil/water mixtures continuously for up to 20 h. Moreover, the compressed PVP-modified cotton could separate both surfactant-free and -stabilized oil-in-water emulsions with fluxes of up to 23,500 L m⁻² h⁻¹ bar⁻¹—a level one to two orders of magnitude higher than that possible when using traditional ultrafiltration membranes having similar rejection properties. The high performance of our PVP-modified cotton and its green, low-energy, cost-effective preparation suggest its great potential for practical applications.

Biosynthesis of single-cell biomass from olive mill wastewater by newly isolated yeasts

The aim of this study was to assess the potential of newly isolated yeast strains Schwanniomyces etchellsii M2 and Candida pararugosa BM24 to produce yeast biomass on olive mill wastewater (OMW). Maximum biomass yield was obtained at 75% (v/v) OMW, after 96 h of incubation at 30 °C and 5% (v/v) inoculum size. The optimal carbon/nitrogen (C/N) ratio was in the range of 8:1 to 10:1, and ammonium chloride was selected as the most suitable nitrogen source. Under these conditions, a maximum biomass production of 15.11 and 21.68 g L(-1) was achieved for Schwanniomyces etchellsii M2 and Candida pararugosa BM24, respectively. Proteins were the major constituents of yeast cells (35.9-39.4% dry weight), lipids were 2.8-5% dry weight, and ash ranged from 4.8 to 9.5 % dry weight. Besides biomass production, yeast strains were also able to reduce toxicity and polluting parameter levels of the spent OMW-based medium. The practical results presented show that pH rose from initial value of 5.5 to 7.24-7.45 after fermentation. Approximately 23.1-41.4% of the chemical oxygen demand (COD) and 15.4-19.2% of the phenolic compounds were removed. The removal of phenolic compounds was associated with their biodegradation and their partial adsorption on yeast cells.

Genome mining of fungal lipid-degrading enzymes for industrial applications

Lipases are interesting enzymes, which contribute important roles in maintaining lipid homeostasis and cellular metabolisms. Using available genome data, seven lipase families of oleaginous and non-oleaginous yeast and fungi were categorized based on the similarity of their amino acid sequences and conserved structural domains. Of them, triacylglycerol lipase (patatin-domain-containing protein) and steryl ester hydrolase (abhydro_lipase-domain-containing protein) families were ubiquitous enzymes found in all species studied. The two essential lipases rendered signature characteristics of integral membrane proteins that might be targeted to lipid monolayer particles. At least one of the extracellular lipase families existed in each species of yeast and fungi. We found that the diversity of lipase families and the number of genes in individual families of oleaginous strains were greater than those identified in non-oleaginous species, which might play a role in nutrient acquisition from surrounding hydrophobic substrates and attribute to their obese phenotype. The gene/enzyme catalogue and relevant informative data of the lipases provided by this study are not only valuable toolboxes for investigation of the biological role of these lipases, but also convey potential in various industrial applications.

Removal of mixed contaminants, crystal violet, and heavy metal ions by using immobilized stains as the functional biomaterial

A new functional biomaterial based on Burkholderia vietnamiensis C09V (C09V) was immobilized on beads and used for simultaneous removal of both heavy metals and crystal violet (CV).

Cellulose nanofibre aerogel filter with tuneable pore structure for oil/water separation and recovery

In present work, a cellulose aerogel filer with excellent performance in oil/water separation was presented.

Removal of Important Parameter from Car Wash Wastewater - A Review

Abstract. Huge quantity of water consumed per car and the various chemical agents used in car wash activities discharged the untreated effluents into stormwater system and eventually ending up in our lakes, rivers and oceans [1]. The accumulated sediments from vehicle wash contain contaminants that reach concentrations where the sludge is considered as a controlled or hazardous waste including of metals, elevated levels of oil and grease, and the unacceptable levels of acidity or alkalinity [2]. This paper provides a comprehensive review of car wash wastewater data analyzes regarding the wastewater discharges, as well as contaminant levels of car wash activities. Besides, the further extensive research on treatments used for the car wash industry for pollutant removal routes including the removal effeciency of pollutants has also been highlighted. The expansion of the review on the influence of the treatment indicates that, the effeciency on removal pollutants depends on the treatment used. Overall, the review illustrates the necessity of a profound knowledge on the car wash wastewater with an extensive lists of common treatment of car wash wastewater in providing the alternative way for on-site treatment for car wash outlet in treating the effluent before discharging into water bodies. Hence, decreases the pollution governing environmental, operational parameters, and the treatment performances of low cost system in treating the car wash wastewater.

The removal of fluoranthene by Agaricus bisporus immobilized in Ca-alginate modified by Lentinus edodes nanoparticles

Fruiting bodies of Agaricus bisporus (A. bisporus) were entrapped in Ca-alginate modified by Lentinus edodes nanoparticles (CA-LENP) to adsorb and biodegrade fluoranthene (FLU) efficiently from an aqueous solution in a fluidized bed bioreactor.

Parameters and kinetics of olive mill wastewater dephenolization by immobilized Rhodotorula glutinis cells

Olive mill wastewater (OMW) with total phenol (TP) concentration range of 300-1200 mg/L was treated with alginate-immobilized Rhodotorula glutinis cells in batch system. The effects of pellet properties (diameter, alginate concentration and cell loading (CL)) and operational parameters (initial TP concentration, agitation rate and reusability of pellets) on dephenolization of OMW were studied. Up to 87% dephenolization was obtained after 120 h biodegradations. The utilization number of pellets increased with the addition of calcium ions into the biodegradation medium. The overall effectiveness factors calculated for different conditions showed that diffusional limitations arising from pellet size and pellet composition could be neglected. Mass transfer limitations appeared to be more effective at high substrate concentrations and low agitation rates. The parameters of logistic model for growth kinetics of R. glutinis in OMW were estimated at different initial phenol concentrations of OMW by curve-fitting of experimental data with the model.

Oil and Grease Removal from Industrial Wastewater Using New Utility Approach

The present study is an attempt to investigate oil and grease pollution that may pollute fresh water and influence aquatic environment. Then removal of oil and grease from manufacturing wastewater befall essential but common techniques not enough. Enzyme and adsorption units representing major developed new laboratory were selected to assess the water quality and humiliation prospective of oil and grease from wastewater. Several components and environmental variables that were dissolved oxygen, bacteriology measure, flow rate and adsorption material amount studied to assess the removal performance of oil and grease. The results elucidated significant variations among different tests which influenced microbial necessary role of oxidation declining develop biological treatment process reached to 72%. The study stressed out natural material (zeolite) that enhanced organic reduction under optimal conditions. These conditions were closer spacing and high length of adsorbing unit that led to increase oil and grease contact period with adsorbent and added to increase performance removal reached to 99%.

Oily wastewaters treatment using Pseudomonas sp. isolated from the compost fertilizer

BACKGROUND

Discharging the oily wastewater in the environment causes serious problems, because of the oil compounds and organic materials presence. Applying biological methods using the lipase enzyme producer microorganisms can be an appropriate choice for treatment of these wastewaters. The aim of this study is to treat those oil wastewaters having high concentration of oil by applying lipase enzyme producer bacteria.

MATERIALS AND METHODS

Oil concentration measurement was conducted using the standard method of gravimetric and the wastewater under study was synthetically made and contained olive, canola and sunflower oil. The strain used in this study was Pseudomonas strain isolated from compost fertilizer. The oil under study had concentration of 1.5 to 22 g/l.

RESULTS

The oil removal amount in concentrations lower than 8.4 g/l was over 95 ± 1.5%. Increase of the oil's concentration to 22 g/l decreases the amount of removal in retention time of 44 hours to 85 ± 2.5%. The best yield of removing this strain in retention time of 44 hours and temperature of 30°C was achieved using Ammonium Nitrate as the nitrogen resource which yield was about 95 percent.

CONCLUSION

The findings of the research showed that Pseudomonas bacteria isolated from the compost fertilizer can degrade high concentration oils.

Yarrowia lipolytica and pollutants: Interactions and applications

Yarrowia lipolytica is a dimorphic, non-pathogenic, ascomycetous yeast species with distinctive physiological features and biochemical characteristics that are significant in environment-related matters. Strains naturally present in soils, sea water, sediments and waste waters have inherent abilities to degrade hydrocarbons such as alkanes (short and medium chain) and aromatic compounds (biphenyl and dibenzofuran). With the application of slow release fertilizers, design of immobilization techniques and development of microbial consortia, scale-up studies and in situ applications have been possible. In general, hydrocarbon uptake in this yeast is mediated by attachment to large droplets (via hydrophobic cell surfaces) or is aided by surfactants and emulsifiers. Subsequently, the internalized hydrocarbons are degraded by relevant enzymes innately present in the yeast. Some wild-type or recombinant strains also detoxify nitroaromatic (2,4,6-trinitrotoluene), halogenated (chlorinated and brominated hydrocarbons) and organophosphate (methyl parathion) compounds. The yeast can tolerate some metals and detoxify them via different biomolecules. The biomass (unmodified, in combination with sludge, magnetically-modified and in the biofilm form) has been employed in the biosorption of hexavalent chromium ions from aqueous solutions. Yeast cells have also been applied in protocols related to nanoparticle synthesis. The treatment of oily and solid wastes with this yeast reduces chemical oxygen demand or value-added products (single cell oil, single cell protein, surfactants, organic acids and polyalcohols) are obtained. On account of all these features, the microorganism has established a place for itself and is of considerable value in environment-related applications.

Marine carbohydrates of wastewater treatment

Our natural heritage (rivers, seas, and oceans) has been exploited, mistreated, and contaminated because of industrialization, globalization, population growth, urbanization with increased wealth, and more extravagant lifestyles. The scenario gets worse when the effluents or contaminants are discharged directly. So wastewater treatment is a very important and necessary in nowadays to purify wastewater before it enters a body of natural water, or it is applied to the land, or it is reused. Various methods are available for treating wastewater but with many disadvantages. Recently, numerous approaches have been studied for the development of cheaper and more effective technologies, both to decrease the amount of wastewater produced and to improve the quality of the treated effluent. Biosorption is an emerging technology, which uses natural materials as adsorbents for wastewater treatment. Low-cost adsorbents of polysaccharide-based materials obtained from marine, such as chitin, chitosan, alginate, agar, and carrageenan, are acting as rescue for wastewater treatment. This chapter reviews the treatment of wastewater up to the present time using marine polysaccharides and its derivatives. Special attention is paid to the advantages of the natural adsorbents, which are a wonderful gift for human survival.