Sensitive immunosensor for cancer biomarker based on dual signal amplification strategy of graphene sheets and multienzyme functionalized carbon nanospheres

Ultrasensitive miRNA-21 Biosensor Based on Zn(TCPP) PET-RAFT Polymerization Signal Amplification and Multiple Logic Gate Molecular Recognition

Quantitative measurement of microRNAs (miRNAs) is extremely important in plenty of biomedical applications especially cancer diagnosis but remains a great challenge. In this work, we developed a logic gate recognition biosensing platform based on the "trinity" molecular recognition mode for quantifying miRNAs with a detection limit of 4.48 aM, along with a linear range from 0.1 nM to 10 aM under optimal experimental conditions. In order to obtain excellent detection performance, we adopted a Zn(TCPP) photocatalytic electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization signal amplification strategy. The light-induced PET-RAFT has developed green applications of free radical polymerization in the field of biosensors. This is the first report on the preparation of signal amplification biosensors using PET-RAFT for tumor marker detection. With the outstanding detection performance, we can apply the sensor system to the early screening of lung cancer patients.

Combining quasi-ZIF-67 hybrid nanozyme and G-quadruplex/hemin DNAzyme for highly sensitive electrochemical sensing

Zeolitic imidazolate frameworks (ZIFs), a famous subfamily of metal-organic frameworks (MOFs), are considered promising electrocatalysts. Herein, ZIF-67 was selected as an electrocatalyst for designing electrochemical sensors due to having the best electrocatalytic activity in ZIFs. To overcome the insufficient electrocatalytic activity of ZIFs, ZIF-67 derivatives (QZIF-67-X, where X represents calcination time) were obtained by calcining at 250 °C for a certain time. The porous structure of the precursor in QZIF-67-X is maintained, exposing more active centers. QZIF-67-X could accelerate electron transfer and lead to improve the electrocatalytic performance. Moreover, QZIF-67-2 was chosen as an Au nanoparticle-supported nanocarrier to further bind G-quadruplex/hemin DNAzymes with strong catalytic activity due to the best supporting activity of QZIF-67-2 among QZIF-67-X. The synergistic catalysis of QZIF-67-2 and G-quadruplex/hemin DNAzymes effectively amplified the reduction current signal of H₂O₂. The linear range of the prepared electrochemical sensor was 2 μM-65 mM, and the detection limit was 1.2 μM. Moreover, the real-time detection of H₂O₂ from HepG2 cells was achieved by the sensor, providing a novel technique for efficient anticancer drug evaluation. These results suggested that QZIF-67 can be utilized as an efficient electrocatalyst for improving the sensitivity of sensors.

Nanosphere Structures Using Various Materials: A Strategy for Signal Amplification for Virus Sensing

Nanomaterials have been explored in the sensing research field in the last decades. Mainly, 3D nanomaterials have played a vital role in advancing biomedical applications, and less attention was given to their application in the field of biosensors for pathogenic virus detection. The versatility and tunability of a wide range of nanomaterials contributed to the development of a rapid, portable biosensor platform. In this review, we discuss 3D nanospheres, one of the classes of nanostructured materials with a homogeneous and dense matrix wherein a guest substance is carried within the matrix or on its surface. This review is segmented based on the type of nanosphere and their elaborative application in various sensing techniques. We emphasize the concept of signal amplification strategies using different nanosphere structures constructed from a polymer, carbon, silica, and metal-organic framework (MOF) for rendering high-level sensitivity of virus detection. We also briefly elaborate on some challenges related to the further development of nanosphere-based biosensors, including the toxicity issue of the used nanomaterial and the commercialization hurdle.

Morphology-Tuned Electrochemical Immunosensing of a Breast Cancer Biomarker Using Hierarchical Palladium Nanostructured Interfaces

Metallic nanostructures are considered attractive candidates for designing novel biosensors due to their enormously significant surface area, accelerated kinetics, and improved affinity. Controllable morphological tuning of metallic nanostructures on sensing interfaces is crucial for attaining clinically relevant sensitivity and exquisite selectivity in a complex biological environment. Therefore, a facile, convenient, and robust one-step electroreduction method was employed to develop different morphological variants of palladium (Pd) nanostructures supported onto oxidized carbon nanotubes to facilitate label-free electrochemical immunosensing of HER2. The morphological and structural attributes of the synthesized Pd nanostructures were thoroughly investigated using scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and atomic force microscopy techniques. In-depth electrochemical investigations revealed an intimate correlation between the nanostructured sensor and electrochemical response, suggesting the suitability of hierarchical palladium nanostructures supported onto carbon nanotubes [Pd(-0.1 V)/CNT] for sensitive detection of HER2. The high surface area of hierarchical Pd nanostructures enabled an ultrasensitive electrochemical response toward HER2 (detection limit: 1 ng/mL) with a wide detection range of 10 to 100 ng/mL. The ease of surface modification, sensitivity, and reliable electrochemical response in human plasma samples suggested the enormous potential of Pd nanostructuring for chip-level point-of-care screening of HER2-positive breast cancer patients.

A Sandwich-Type Electrochemical Immunosensor for Insulin Detection Based on Au-Adhered Cu5 Zn8 Hollow Porous Carbon Nanocubes and AuNP Deposited Nitrogen-Doped Holey Graphene

Rapid, accurate, and sensitive insulin detection is crucial for managing and treating diabetes. A simple sandwich-type electrochemical immunosensor is engineered using gold nanoparticle (AuNP)-adhered metal-organic framework-derived copper-zinc hollow porous carbon nanocubes (Au@Cu₅ Zn₈ /HPCNC) and AuNP-deposited nitrogen-doped holey graphene (NHG) are used as a dual functional label and sensing platform. The results show that identical morphology and size of Au@Cu₅ Zn₈ /HPCNC enhance the electrocatalytic active sites, conductivity, and surface area to immobilize the detection antibodies (Ab₂ ). In addition, AuNP/NHG has the requisite biocompatibility and electrical conductivity, which facilitates electron transport and increases the surface area of the capture antibody (Ab₁ ). Significantly, Cu₅ Zn₈ /HPCNC exhibits necessary catalytic activity and sensitivity for the electrochemical reduction of H₂ O₂ using (i-t) amperometry and improves the electrochemical response in differential pulse voltammetry. Under optimal conditions, the immunosensor for insulin demonstrates a wide linear range with a low detection limit and viable specificity, stability, and reproducibility. The platform's practicality is evaluated by detecting insulin in human serum samples. All these characteristics indicate that the Cu₅ Zn₈ /HPCNC-based biosensing strategy may be used for the point-of-care assay of diverse biomarkers.

Preparation of a pH-responsive controlled-release electrochemical immunosensor based on polydopamine encapsulation for ultrasensitive detection of alpha-fetoprotein

To accomplish ultra-sensitive detection of alpha-fetoprotein(AFP), a novel electrochemical immunosensor using polydopamine-coated Fe₃O₄ nanoparticles (PDA@Fe₃O₄ NPs) as a smart label and polyaniline (PANI) and Au NPs as substrate materials has been created. The sensor has the following advantages over typical immunoassay technology: (1) The pH reaction causes PDA@Fe₃O₄ NPs to release Prussian blue (PB) prosoma while also destroying the secondary antibody label and immunological platform and lowering electrode impedance; (2) PB has a highly efficient catalytic effect on H₂O₂, allowing for the obvious amplification of electrical impulses; (3) PANI was electrodeposited on the electrode surface to avoid PB loss and signal leakage, which effectively absorbed and fixed PB while considerably increasing electron transmission efficiency. The sensor's detection limit was 0.254 pg·mL^-1 (S/N = 3), with a detection range of 1 pg·mL^-1 to 100 ng·mL^-1. The sensor has a high level of selectivity, repeatability, and stability, and it is predicted to be utilized to detect AFP in real-world samples.

A universal, portable, and ultra-sensitive pipet immunoassay platform for deoxynivalenol detection based on dopamine self-polymerization-mediated bioconjugation and signal amplification

Deoxynivalenol (DON) is highly toxic to the environment and human health. It is important to detect DON with ultra-high sensitivity, ease of operation, and low cost. Inspired by the excellent stability and biocompatibility of polydopamine, a universal, portable and ultra-sensitive pipet immunoassay platform was reported for DON detection based on dopamine self-polymerization (polydopamine coating and polydopamine nanoparticles). The polydopamine coating acted as an effective strategy for biomolecule immobilization on the pipet to improve the coating efficiency that significantly reduced the required concentration of biomolecules. Performing the ELISA in pipets saved nearly 67% of the antigen amount and 83% of the antibody amount, which reduced the detection cost and simplified the experimental steps. The dual signal amplification in this pipet immunoassay enabled ultra-high sensitivity. Polydopamine nanoparticles acted as the enrichment carrier of horseradish peroxidase-goat anti-mouse IgG for the first-round signal amplification, followed by the tyramine-mediated loading of streptavidin-HRP for the second-round signal amplification. The dual-enriched HRP catalyzed the color-developing substrate to achieve highly sensitive colorimetric DON detection with a limit of detection of 0.435 ng/mL.

An ultrasensitive biosensor for prostate specific antigen detection in complex serum based on functional signal amplifier and designed peptides with both antifouling and recognizing capabilities

The development of biosensors capable of averting biofouling and detecting biomarkers in complex biological media remains a challenge. Herein, an ultralow fouling and highly sensitive biosensor based on specifically designed antifouling peptides and a signal amplification strategy was designed for prostate specific antigen (PSA) detection in human serum. A low fouling layer of poly(ethylene glycol) (PEG) doped the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) was electrodeposited on the electrode surface, followed by the immobilization of streptavidin and further attachment of biotin-labelled peptides. The peptide was designed to include PSA specific recognition domain (HSSKLQK) and antifouling domain (PPPPEKEKEKE), and the terminal of the peptide was functionalized with -SH group. DNA functionalized gold nanorods (DNA/AuNRs) were then attached to the electrode, and methylene blue (MB) molecules were adsorbed to the DNA to form the signal amplifier. In the presence of PSA, the peptide was specifically cleaved and resulted in the loss of AuNRs together with DNA and MB, and thus significant decrease of the current signal. The biosensor exhibited a low limit of detection (LOD) of 0.035 pg mL^-1 (S/N = 3), with a wide linear range from 0.10 pg mL^-1 to 10.0 ng mL^-1, and it was able to detect PSA in real human serum owing to the presence of the antifouling peptides, indicating great potential of the constructed biosensor for practical application.

Ion-selective electrode-based potentiometric immunoassays for the quantitative monitoring of alpha-fetoprotein by coupling rolling cycle amplification with silver nanoclusters

This work reports an ion-selective electrode-based potentiometric immunoassay for AFP detection coupling rolling cycle amplification with silver nanoclusters.

Carboxylic acid-tethered polyaniline as a generic immobilization matrix for electrochemical bioassays

Polyaniline (PANI) was functionalized by thiol-ene click chemistry to obtain carboxylic acid-tethered polyaniline (PCOOH). The versatility of PCOOH as an immobilization matrix was demonstrated by constructing four different biosensors for detection of metabolites and cancer biomarker. Immobilization efficiency of PCOOH was investigated by surface plasmon resonance and fluorescence microscopic analysis which revealed dense immobilization of biomolecules on PCOOH as compared to conventional PANI. A sandwich electrochemical biosensor was constructed using PCOOH for detection of liver cancer biomarker, α-fetoprotein (AFP). The sensor displayed sensitivity of 15.24 µA (ng mL^-1)^-1 cm^-2, with good specificity, reproducibility (RSD 3.4%), wide linear range (0.25-40 ng mL^-1) at - 0.1 V (vs. Ag/AgCl), and a low detection limit of 2 pg mL^-1. The sensor was validated by estimating AFP in human blood serum samples where the AFP concentrations obtained are consistent with the values estimated using ELISA. Furthermore, utilization of PCOOH for construction of enzymatic biosensor was demonstrated by covalent immobilization of glucose oxidase, uricase, and horseradish peroxidase (HRP) for detection of glucose, uric acid, and H₂O₂, respectively. The biosensors displayed reasonable sensitivity (50, 148, 127 µA mM^-1 cm^-2), and linear ranges (0.1-5, 0.1-6, 0.1-7 mM) with a detection limit of 10, 1, and 8 µM for glucose, uric acid, and H₂O₂, respectively. The present study demonstrates the capability of PCOOH to support and enable oxidation of H₂O₂ generated by oxidase enzymes as well as HRP enzyme catalyzed reduction of H₂O₂. Thus, PCOOH offers a great promise as an immobilization matrix for development of high-performance biosensors to quantify a variety of other disease biomarkers. Carboxylic acid-tethered polyaniline synthesized by thiol-ene click chemistry was used as matrix to construct four different electrochemical biosensors for detection of cancer biomarker α-fetoprotein, glucose, uric acid, and H₂O₂.

Adriamycin coated silica microspheres as labels for cancer biomarker alpha-fetoprotein detection

Adriamycin (ADM)-coated silica microspheres as a label for the sensitive detection of a cancer biomarker alpha-fetoprotein (AFP) was reported. Silica microspheres (SiO2 MSs) were employed as the carrier for the immobilization of gold nanoparticles (Au NPs), secondary antibody (Ab2) and ADM (denote: ADM@Au NPs@SiO2 MS/Ab2) as labels. In the presence of AFP, the labels were captured on the surface of the Au NP-reduced graphene oxide (rGO) (Au NP-rGO) nanocomposites to form a sandwich structure vs. the specific recognition of antibody-antigen. In a pH 7.4 phosphate buffer solution, a well-defined peak of ADM at about -0.70 V (vs. SCE) was recorded via differential pulse voltammetry, the peak intensity of which was related to the concentration of AFP. Under optimal experimental conditions, the immunoassay exhibited a wide linear range (0.5 pg mL-1 to 75 ng mL-1) and low limit of detection (0.17 pg mL-1). Further, the immunoassay was evaluated for serum samples, which gave satisfactory results.

Fractionation of Single-stranded DNAs with/without Stable Preorganized Structures Using Capillary Sieving Electrophoresis for Aptamer Selection

Aptamers, single-stranded DNAs/RNAs with a strong and specific interaction towards a target molecule, have wide applications in the fields of medicine and biosensors. In conventional aptamer selection methods, it is difficult to obtain "preorganized" and/or "induced-fit" type of aptamers selectively. In this study, separation and fractionation of single-stranded DNAs with/without stable preorganized structures were carried out using capillary sieving electrophoresis. The fractionated DNAs showed different mobilities and thermodynamic stabilities of their secondary structures; this outcome is deemed to be necessary for the synthesis of novel aptasensors with a desirable sensing mechanism.

Ultrasensitive molecularly imprinted fluorescence sensor for simultaneous determination of CA125 and CA15-3 in human serum and OVCAR-3 and MCF-7 cells lines using Cd and Ni nanoclusters as new emitters

In the clinical diagnosis of tumors, a single-marker immunoassay may lead to false results. Thus there is a need for an effective and valid method for the simultaneous measurement of multiple tumor markers. In this work, an efficient fluorescence immunosensor for the simultaneous measurement of CA125 and CA15-3 tumor markers was fabricated by utilizing the high selectivity of magnetic molecularly imprinted polymers (MMIPs) and the high sensitivity of a fluorescence (FL) method. Ni nanoclusters (Ni NCs) and noble Cd nanoclusters (Cd NCs) were introduced as efficient and economic emitters, and magnetic graphene oxide (GO-Fe₃O₄) was applied as a support material for surface molecularly imprinted polymers. Under the most favorable experimental conditions, the fluorescence intensity of the Cd NCs and Ni NCs gradually increased with increasing concentration of CA125 and CA15-3 antigens at a range of 0.0005-40 U mL^-1, respectively, with a limit of detection (LOD) of 50 μU mL^-1. The developed method had excellent properties including a broad linear range, good reproducibility, and simple operation for the clinical diagnosis of CA 125 and CA 15-3 tumor markers. This molecularly imprinted fluorescence sensor has the potential to be an effective clinical tool for the timely screening of breast cancer in human serum samples and OVCAR-3 and MCF-7 cell lines, and can be applied in clinical diagnostics.

Nanomaterial-enhanced 3D-printed sensor platform for simultaneous detection of atrazine and acetochlor

The widespread use of herbicides in agriculture and gardening causes environmental and safety issues such as water pollution. Thus, efficient and convenient analysis of the levels of herbicide residues is of significant importance. Here, we employed 3D-printing to design a multiplex immunosensor for simultaneous detection of two widely used herbicides, atrazine and acetochlor. Multiplexing was achieved through customization of a lateral flow immunoassay, and then integrated with an electrochemical analyzer for ultrasensitive detection. Quantification of herbicide residues was realized through the detection of a novel nanomaterial label, the mesoporous core-shell palladium@platium nanoparticle (Pd@Pt NP), for its outstanding peroxidase-like property. During the electrochemical analysis, the catalytic activity of Pd@Pt NPs on the redox reaction between thionin acetate and hydrogen peroxide provided an electrochemically driven signal that accurately indicated the level of herbicide residues. Using this Nanomaterial-enhanced multiplex electrochemical immunosensing (NEMEIS) system, simultaneous detection of atrazine and acetochlor was realized with a limit of detection of 0.24 ppb and 3.2 ppb, respectively. To further evaluate the feasibility, the optimized NEMEIS was employed for detection in atrazine and acetochlor residue-containing spiked samples, and an overall recovery with 90.8% - 117% range was obtained. The NEMEIS constructed with the aid of 3D-printing provides a rapid, precise, economical, and portable detection device for herbicides, and its success suggests potential broad applications in chemical analysis, biosensors and point-of-care monitoring.

Carbon-based Nanomaterials and Curcumin: A Review of Biosensing Applications

Curcumin, the main active constituent of turmeric (Curcuma longa L.), is a naturally occurring phenolic compound with a wide variety of pharmacological activities. Although it has multiple pharmaceutical properties, its bioavailability and industrial usage are hindered due to rapid hydrolysis and low water solubility. Due to the growing market of curcumin, exact determination of curcumin in trade and human biological samples is important for monitoring therapeutic actions. Different nanomaterials have been suggested for sensing curcumin; and in this case, carbon-based nanomaterials (CNMs) are one of the most outstanding developments in nanomedicine, biosensing, and regenerative medicine. There are a considerable number of reports which have shown interesting potential of CNMs-based biosensors in the sensitive and selective detection of curcumin. Therefore, this review aims to increase understanding the interaction of curcumin with CNMs in the context of biosensing.

Recent Advances in the Construction of Flexible Sensors for Biomedical Applications

The fabrication of flexible sensors is a potential way to promote the progress of modern social science and technology due to their wide applications in high-performance electronic equipment and devices. Flexible sensors based on organic materials combine the unique advantages of flexibility and low cost, increasing interest in healthcare monitoring, treatment, and human-machine interfaces. Advances in materials science and biotechnology have rapidly accelerated the development of bio-integrated multifunctional sensors and devices. Due to their excellent mechanical and electrical properties, many types of functional materials provided benefits for the construction of various sensors with improved flexibility and stretchability. In this review, recent advance in the fabrication of flexible sensors by using functional nanomaterials including nanoparticles, carbon materials, metal-organic materials, and polymers is presented. In addition, the potential biomedical applications of the fabricated flexible sensors for detecting gas molecules signals, small molecules, DNA/RNA, proteins, others are introduced and discussed.

Development of a sensitive electrochemical immunosensor using polyaniline functionalized graphene quantum dots for detecting a depression marker

As a new type of conductive material, polyaniline functionalized graphene quantum dots (PAGD), which were prepared by in-situ polymerization had been used to construct a novel electrochemical immunosensor for early screening of depression markers-heat shock protein 70 (HSP70). Profiting from the huge specific surface area, good bioactivity and excellent structure of PAGD, a variety of heat shock protein 70 (HSP70) was firmly loaded on the surface of PAGD for successful construction of basic electrode (HSP70/PAGD/GCE), which was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), respectively. Due to the HSP70 fixed on the surface of basic electrode and the HSP70 in the samples can competitively combine with the horseradish peroxidase labeled human HSP70 antibody (HRP-Strept-Biotin-Ab). As a result, there is negative correlation between the concentration of HSP70 in samples and the detection signal of the proposed electrochemical immunosensor (HRP-Strept-Biotin-Ab-HSP70/PAGD/GCE) in the test liquid. Under conditions optimized for determining HSP70, wide linearity was obtained in the range of 0.0976-100 ng/mL, with a low detection limit of 0.05 ng/mL at 3σ. Moreover, the proposed electrochemical immunosensors was successfully applied to detect HSP70 in plasma samples, and exhibited good precision, acceptable stability and reproducibility. Therefore, this study provides a novel and convenient method for early clinical screening of depression markers, and also provides a reliable and objective analysis method for the diagnosis of depression at the molecular level.

Current Use of Carbon-Based Materials for Biomedical Applications—A Prospective and Review

Among a large number of current biomedical applications in the use of medical devices, carbon-based nanomaterials such as graphene (G), graphene oxides (GO), reduced graphene oxide (rGO), and carbon nanotube (CNT) are frontline materials that are suitable for developing medical devices. Carbon Based Nanomaterials (CBNs) are becoming promising materials due to the existence of both inorganic semiconducting properties and organic π-π stacking characteristics. Hence, it could effectively simultaneously interact with biomolecules and response to the light. By taking advantage of such aspects in a single entity, CBNs could be used for developing biomedical applications in the future. The recent studies in developing carbon-based nanomaterials and its applications in targeting drug delivery, cancer therapy, and biosensors. The development of conjugated and modified carbon-based nanomaterials contributes to positive outcomes in various therapies and achieved emerging challenges in preclinical biomedical applications. Subsequently, diverse biomedical applications of carbon nanotube were also deliberately discussed in the light of various therapeutic advantages.

Biosensing of prostate specific antigen (PSA) in human plasma samples using biomacromolecule encapsulation into KCC-1-npr-NH2: A new platform for prostate cancer detection

Prostate-specific antigen (PSA) is a high molecular weight glycoprotein that is used as a marker for the diagnosis of prostate cancer and is therefore important in the medical field. In this study, a novel sandwich type immunoassay was designed based on encapsulation of biotinylated antibody into KCC-1-npr-NH₂. KCC-1-npr-NH₂ stabilized the stability of the primary antibody. So, encapsulated Ab1 was immobilized on the surface of glassy carbon electrode. Field emission scanning electron microscope (FE-SEM) was employed to monitor the sensor fabrication. The engineered immunosensor was used for the detection of PSA using differential pulse voltammetry (DPVs) and square wave voltammetry (SWVs) techniques. The proposed interface lead to enhancement of accessible surface area for immobilizing a high amount of anti-PSA antibody, increasing electrical conductivity, boosting stability, catalytic properties and biocompatibility. The intensity of electrochemical signals is also increased by the use of AuNPs functionalized with CysA used in secondary antibody (HRP conjugated PSA) structure. Under optimal conditions, the designed immuno-assay provide a good analytical performance for quantifying the PSA marker in the linear range of 1 to 60 μg/l.

Aerosol-Jet-Printed Graphene Immunosensor for Label-Free Cytokine Monitoring in Serum

Graphene-based inks are becoming increasingly attractive for printing low-cost and flexible electrical circuits due to their high electrical conductivity, biocompatibility, and manufacturing scalability. Conventional graphene printing techniques, such as screen and inkjet printing, are limited by stringent ink viscosity requirements properties and large as-printed line width that impedes the performance of printed biosensors. Here, we report an aerosol-jet-printed (AJP) graphene-based immunosensor capable of monitoring two distinct cytokines: interferon gamma (IFN-γ) and interleukin 10 (IL-10). Interdigitated electrodes (IDEs) with 40 μm finger widths were printed from graphene-nitrocellulose ink on a polyimide substrate. The IDEs were annealed in CO₂ to introduce reactive oxygen species on the graphene surface that act as chemical handles to covalently link IFN-γ and IL-10 antibodies to the graphene surfaces. The resultant AJP electrochemical immunosensors are capable of monitoring cytokines in serum with wide sensing range (IFN-γ: 0.1-5 ng/mL; IL-10: 0.1-2 ng/mL), low detection limit (IFN-γ: 25 pg/ml and IL-10: 46 pg/ml) and high selectivity (antibodies exhibited minimal cross-reactivity with each other and IL-6) without the need for sample prelabeling or preconcentration. Moreover, these biosensors are mechanically flexible with minimal change in signal output after 250 bending cycles over a high curvature (Φ = 5 mm). Hence, this technology could be applied to numerous electrochemical applications that require low-cost electroactive circuits that are disposable and/or flexible.

Fate of GdF3 nanoparticles-loaded PEGylated carbon capsules inside mice model: a step toward clinical application

The successful translation of nanostructure-based bioimaging and/or drug delivery system needs extensive in vitro and in vivo studies on biocompatibility, biodistribution, clearance, and toxicity for its diagnostic applications. Herein, we have investigated the in vitro cyto-hemocompatibility, in vivo biodistribution, clearance, and toxicity in mice after systemic administration of GdF₃ nanoparticles loaded PEGylated mesoporous carbon capsule (GdF₃-PMCC)-based theranostic system. In vitro cyto-hemocompatibility study showed a very good biocompatibility up to concentration of 500 µg/ml. Biodistribution studies carried out from 1 h to 8 days showed that GdF₃-PMCC was found in major organs, such as liver, kidney, spleen, and muscle till 4th day and it was negligible in any tissue after 8th day. The clearance study was carried out for a period of 8 days and it was observed that the urinary system is the main route of excretion of GdF₃-PMCC. The tissue toxicity study was done for 15 days and histopathological analysis indicated that the GdF₃-PMCC based theranostic system does not have any adverse effect in tissues. Thus, PMCCs are nontoxic and can be applied as theranostic agents in contrast to the other carbon-based systems (PEGylated carbon nanotubes and PEGylated graphene oxide) which showed significant toxicity.

Enhanced biosensing strategies using electrogenerated chemiluminescence: recent progress and future prospects

An overview of enhancement strategies for highly sensitive ECL-based sensing of bioanalytes enabling early detection of cancer.

A streptavidin-functionalized tin disulfide nanoflake-based ultrasensitive electrochemical immunosensor for the detection of tumor markers

Universal and novel streptavidin-functionalized tin disulfide nanoflakes (SnS₂ NFs) have been explored for the first time to develop an ultrasensitive electrochemical immunosensor for the detection of tumor markers.

Progress in cancer biomarkers monitoring strategies using graphene modified support materials

Cancer is the one of the fatal and dreaded disease responsible for huge number of morbidity and mortality across the globe. It is expected that the global burden will increase to 21.7 million fresh cancer cases as compared to present estimate of 18.1 million cancer cases in addition to nearly 9.6 million cancer deaths worldwide. In response to cancerous or certain benign conditions; specific type of tumor or cancer markers (biomarkers) are produced at much higher levels which are secreted into the urine, blood, stool, tumor or other tissues. Therefore, the efficient and early detection of cancer biomarkers is necessary which can offer a reliable way for cancer patient screening and diagnosis. This process not only helps in the evaluation of pathogenic processes but also the prognosis of different cancers and pharmacological responses to therapeutic interventions are secured. Over the past several years, electrochemical detection methods have proved to be the most attractive methods among many, due to the advantages, such as simple instrumentation, portability, low cost and high sensitivity. Furthermore, the modifications of these electrochemical immunosensors by utilizing various types of nanomaterials enable these systems to detect trace amount of target tumor markers. Hence, herein, we intend to review the selective works on electrochemical detection of various biomarkers using wide range of nanomaterials with a particular focus on graphene.

Thermally stable and uniform DNA amplification with picosecond laser ablated graphene rapid thermal cycling device

Rapid thermal cycling (RTC) in an on-chip device can perform DNA amplification in vitro through precise thermal control at each step of the polymerase chain reaction (PCR). This study reports a straightforward fabrication technique for patterning an on-chip graphene-based device with hole arrays, in which the mechanism of surface structures can achieve stable and uniform thermal control for the amplification of DNA fragments. A thin-film based PCR device was fabricated using picosecond laser (PS-laser) ablation of the multilayer graphene (MLG). Under the optimal fluence of 4.72 J/cm2 with a pulse overlap of 66%, the MLG can be patterned with arrays of 250 μm2 hole surface structures. A 354-bp DNA fragment of VP1, an effective marker for diagnosing the BK virus, was amplified on an on-chip device in less than 60 min. A thin-film electrode with the aforementioned MLG as the heater was demonstrated to significantly enhance temperature stability for each stage of the thermal cycle. The temperature control of the heater was performed by means of a developed programmable PCR apparatus. Our results demonstrated that the proposed integration of a graphene-based device and a laser-pulse ablation process to form a thin-film PCR device has cost benefits in a small-volume reagent and holds great promise for practical medical use of DNA amplification.

2D Materials in Development of Electrochemical Point-of-Care Cancer Screening Devices

Effective cancer treatment requires early detection and monitoring the development progress in a simple and affordable manner. Point-of care (POC) screening can provide a portable and inexpensive tool for the end-users to conveniently operate test and screen their health conditions without the necessity of special skills. Electrochemical methods hold great potential for clinical analysis of variety of chemicals and substances as well as cancer biomarkers due to their low cost, high sensitivity, multiplex detection ability, and miniaturization aptitude. Advances in two-dimensional (2D) material-based electrochemical biosensors/sensors are accelerating the performance of conventional devices toward more practical approaches. Here, recent trends in the development of 2D material-based electrochemical biosensors/sensors, as the next generation of POC cancer screening tools, are summarized. Three cancer biomarker categories, including proteins, nucleic acids, and some small molecules, will be considered. Various 2D materials will be introduced and their biomedical applications and electrochemical properties will be given. The role of 2D materials in improving the performance of electrochemical sensing mechanisms as well as the pros and cons of current sensors as the prospective devices for POC screening will be emphasized. Finally, the future scopes of implementing 2D materials in electrochemical POC cancer diagnostics for the clinical translation will be discussed.

Sandwich-type electrochemical immunosensor constructed using three-dimensional lamellar stacked CoS2@C hollow nanotubes prepared by template-free method to detect carcinoembryonic antigen

Effective treatment of cancer depends on early detection of tumor markers. In this paper, an effective template-free method was used to prepare CoS₂@C three-dimensional hollow sheet nanotubes as the matrix of the immunosensor. The unique three-dimensional hybrid hollow tubular nanostructure provides greater contact area and enhanced detection limit. The CoS₂@C-NH₂-HRP nanomaterial was synthesized as a marker and had a high specific surface area, which can effectively improve the electrocatalytic ability of hydrogen peroxide (H₂O₂) reduction while increasing the amount of capture-fixed carcinoembryonic antigen antibody (anti-CEA). In addition, the co-bonded horseradish peroxidase (HRP) can further promote the redox of H₂O₂ and amplify the electrical signal. Carcinoembryonic antigen (CEA) was quantified by immediate current response (i-t), and the prepared immunosensor had good analytical performance under optimized conditions. The current signal and the concentration of CEA were linear in the range of 0.001-80 ng/mL, and the detection limit was 0.33 pg/mL (S/N = 3). The designed immunosensor has good selectivity, repeatability and stability, and the detection of human serum samples shows good performance. Furthermore, electrochemical immunosensor has broad application prospects in the clinical diagnosis of CEA.

Facile, Rapid, and Low-Cost Electrophoresis Titration of Thrombin by Aptamer-Linked Magnetic Nanoparticles and a Redox Boundary Chip

An aptamer-linked assay of a target biomarker (e.g., thrombin) is facing the challenges of long-term run, complex performance, and expensive instrument, unfitting clinical diagnosis in resource-limited areas. Herein, a facile chip electrophoresis titration (ET) model was proposed for rapid, portable, and low-cost assay of thrombin via aptamer-linked magnetic nanoparticles (MNPs), redox boundary (RB), and horseradish peroxidase (HRP). In the electrophoresis titration-redox boundary (ET-RB) model, thrombin was chosen as a model biomarker, which could be captured within 15 min by MNP-aptamer 1 and HRP-aptamer 2, forming a sandwich complex of (MNP-aptamer 1)-thrombin-(HRP-aptamer 2). After MNP separation and chromogenic reaction of 3,3',5,5'-tetramethylbenzidine (TMB) within 10 min, an ET-RB run could be completed within 5 min based on the reaction between a 3,3',5,5'-tetramethylbenzidine radical cation (TMB^•+) and l-ascorbic acid in the ET channel. The systemic experiments based on the ET-RB method revealed that the sandwich complex could be formed and the thrombin content could be assayed via an ET-RB chip, demonstrating the developed model and method. In particular, the ET-RB method had the evident merits of simplicity, rapidity (less than 30 min), and low cost as well as portability and visuality, in contrast to the currently used thrombin assay. In addition, the developed method had high selectivity, sensitivity (limit of detection of 0.04 nM), and stability (intraday: 3.26%, interday: 6.07%) as well as good recovery (urine: 97-102%, serum: 94-103%). The developed model and method have potential to the development of a point-of-care testing assay in resource-constrained conditions.

An exonuclease-assisted triple-amplified electrochemical aptasensor for mucin 1 detection based on strand displacement reaction and enzyme catalytic strategy

The development of some sensitive methods for MUC1 is critical for preclinical diagnosis of tumors. In this experiment, we built a triple-amplified electrochemical aptasensor to achieve sensitive detection of MUC1, which was based on exonuclease III (Exo III)-assisted with strand displacement reaction and enzyme catalytic strategy. Firstly, with the help of Exo III, MUC1 and aptamer could be recycled during the cycle I, the single stranded DNA-1 (S-1) was produced during the process and was introduced to the hybride reaction on the electrode. Secondly, during the cycle II, strand displacement reaction was triggered on the electrode with the adding of hairpin DNA-2 (H-2). Thirdly, after the gold nanoparticles (AuNPs)-DNA-enzyme conjugates hybrided with the H-2 on the electrode, the AuNPs-DNA-enzyme conjugates could act as signal probe to produce electrochemical catalytic signal. We used the fabricated triple-amplified electrochemical aptasensor that could detect MUC1 from 0.1 pg mL^-1 to 10 ng mL^-1 with the detection limit of 0.04 pg mL^-1 under the optimized experimental conditions. The constructed triple-amplified electrochemical aptasensor could be applied in real samples determination. Besides, the strategy can be applied to detect other proteins for health monitoring.

The Role of Electrochemical Immunosensors in Clinical Analysis

An immunosensor is a kind of affinity biosensor based on interactions between an antigen and specific antigen immobilized on a transducer surface. Immunosensors possess high selectivity and sensitivity due to the specific binding between antibody and corresponding antigen, making them a suitable platform for several applications especially in the medical and bioanalysis fields. Electrochemical immunosensors rely on the measurements of an electrical signal recorded by an electrochemical transducer and can be classed as amperometric, potentiometric, conductometric, or impedimetric depending on the signal type. Among the immunosensors, electrochemical immunosensors have been more perfected due to their simplicity and, especially their ability to be portable, and for in situ or automated detection. This review addresses the potential of immunosensors destined for application in clinical analysis, especially cancer biomarker diagnosis. The emphasis is on the approaches used to fabricate electrochemical immunosensors. A general overview of recent applications of the developed electrochemical immunosensors in the clinical approach is described.

Comprehensive spectroscopic studies of synergism between Gadong starch based carbon dots and bovine serum albumin

Carbon dots (C-dots) were used to study the binding mechanisms with serum protein, bovine serum albumin (BSA) by using two notable binding systems known as non-covalent and covalent interaction. Interaction between C-dots and BSA were estimated by Stern-Volmer equation and Double Log Regression Model (DLRM). According to the fluorescent intensity, quenching of model carrier protein by C-dots was due to dynamic quenching for non-covalent and static quenching for covalent binding. The binding site constant, K_A and number of binding site, for covalent interaction is 1754.7L/mol and n≈1 (0.6922) were determined by DLRM on fluorescence quenching results. The blue shift of the fluorescence spectrum, from 450nm to 421nm (non-covalent) and 430nm (covalent) and suggested that both the microenvironment of C-dots and protein changed in relation to the protein concentration. The fluorescence intensity results show that protein structure has a significant role in Protein-C-dots interactions and type of binding influence physicochemical properties of C-dots differently. Understanding to this bio interface is important to utilize both quantum dots and biomolecules for biomedical field. It can be a useful guideline to design further applications in biomedical and bioimaging.

Three-dimensional nitrogen-doped mesoporous carbon nanomaterials derived from plant biomass: Cost-effective construction of label-free electrochemical aptasensor for sensitively detecting alpha-fetoprotein

We synthesized three kinds of nitrogen-doped nanoporous carbon nanomaterials (represented by N-mC) through a cost-effective method, that is, pyrolysis of plant biomasses (grass, flower, and peanut shells). We further explored their potential as sensitive bioplatforms for electrochemical label-free aptasensors to facilitate the early detection of alpha-fetoprotein (AFP). Chemical structure characterizations revealed that rich functional groups coexisted in as-synthesized N-mC nanomaterials, such as C-C, C-O, C=O, C-N, and COOH. Among the three kinds of N-mC nanomaterials, the one derived from grass (N-mC_g) exhibited the lowest carbon defect degree, the highest I_D/I_G ratio in the Raman spectra, and the largest specific surface area (186.2 m² g^-1). Consequently, N-mC_g displayed excellent electrochemical activity and strong affinity toward aptamer strands, further endowing the corresponding aptasensor with sensitive detection ability for AFP. Electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) were used to investigate the whole detection procedure for AFP. The EIS and DPV results showed that the fabricated N-mC_g-based aptasensor possessed an extremely low limit of detection of 60.8 and 61.8 fg·mL^-1 (s/n = 3), respectively, for detecting AFP within a wide linear range from 0.1 pg mL^-1 to 100 ng mL^-1. Moreover, the aptasensor displayed acceptable selectivity and applicability, high reproducibility, and excellent stability in serum samples of cancer patients. Therefore, the proposed cost-effective and label-free strategy based on the nitrogen-doped nanoporous carbon derived from plant biomass is a promising approach for the early detection of various tumor markers.

Facile Synthesis of Cu2O@TiO2-PtCu Nanocomposites as a Signal Amplification Strategy for the Insulin Detection

Novel ultrasensitive sandwich-type electrochemical immunosensor was proposed for the quantitative detection of insulin, a representative biomarker for diabetes. To this end, molybdenum disulfide nanosheet-loaded gold nanoparticles (MoS₂/Au NPs) were used as substrates to modify bare glassy carbon electrodes. MoS₂/Au NPs not only present superior biocompatible and large specific surface area to enhance the loading capacity of primary antibody (Ab₁) but also present good electrical conductivity to accelerate electron transfer rate. Moreover, the amino-functionalized cuprous oxide decorated with titanium dioxide octahedral composites (Cu₂O@TiO₂-NH₂) were prepared to load dendritic platinum-copper nanoparticles (PtCu NPs) to realize signal amplification strategy. The resultant nanocomposites (cuprous oxide decorated with titanium dioxide octahedral loaded dendritic platinum-copper nanoparticles) demonstrate uniform octahedral morphology and size, which effectively increases the catalytically active sites and specific surface area to load the secondary antibody (Ab₂), even increases conductivity. Most importantly, the resultant nanocomposites possess superior electrocatalytic activity for hydrogen peroxide (H₂O₂) reduction, which present the signal amplification strategy. Under the optimal conditions, the proposed immunosensor exhibited a linear relationship between logarithm of insulin antigen concentration and amperometric response within a broad range from 0.1 pg/mL to 100 ng/mL and a limit detection of 0.024 pg/mL. Meanwhile, the immunosensor was employed to detect insulin in human serum with satisfactory results. Furthermore, it also presents good reproducibility, selectivity, and stability, which exhibits broad application prospects in biometric analysis.

Engineering of CdTe/SiO2 nanocomposites: Enhanced signal amplification and biocompatibility for electrochemiluminescent immunoassay of alpha-fetoprotein

Electrochemiluminescent (ECL) performance and cytotoxicity of CdTe quantum dots (QDs)-based nanocomposites and its possible application for ECL immunoassay were investigated. Two types of CdTe-based nanocomposites, i.e., SiO₂-coated CdTe (CdTe@SiO₂) and CdTe-functionalized SiO₂ (SiO₂@CdTe), were synthesized and comprehensively compared in regarding of the cytotoxicity and ECL performance. The in vitro cytotoxicity of SiO₂@CdTe and CdTe@SiO₂ nanoparticles was assessed in L02 cells using standard CCK-8 assay, and their ECL performance was investigated by constructing sandwiched immunosensor using SiO₂@CdTe and CdTe@SiO₂ as tags for the labelled antibody, respectively. The results showed that CdTe@SiO₂ exhibited much lower cytotoxicity and a higher ECL intensity than SiO₂@CdTe. Taking the analysis of alpha-fetoprotein (AFP) as an example, the ECL immunosensor using CdTe@SiO₂ as an emitter was proved to have a wide linear dynamic range from 1.0 pg mL^-1 to 100 ng mL^-1 with a low detection limit of 0.22 pg mL^-1 (S/N ratio of 3). The ECL immunosensor also demonstrated satisfactory recovery and excellent reproducibility and stability, indicating that this method has prospects in practical application in the clinical diagnosis of AFP.

Biomarkers-based Biosensing and Bioimaging with Graphene for Cancer Diagnosis

At the onset of cancer, specific biomarkers get elevated or modified in body fluids or tissues. Early diagnosis of these biomarkers can greatly improve the survival rate or facilitate effective treatment with different modalities. Potential nanomaterial-based biosensing and bioimaging are the main techniques in nanodiagnostics because of their ultra-high selectivity and sensitivity. Emerging graphene, including two dimensional (2D) graphene films, three dimensional (3D) graphene architectures and graphene hybrids (GHs) nanostructures, are attracting increasing interests in the field of biosensing and bioimaging. Due to their remarkable optical, electronic, and thermal properties; chemical and mechanical stability; large surface area; and good biocompatibility, graphene-based nanomaterials are applicable alternatives as versatile platforms to detect biomarkers at the early stage of cancer. Moreover, currently, extensive applications of graphene-based biosensing and bioimaging has resulted in promising prospects in cancer diagnosis. We also hope this review will provide critical insights to inspire more exciting researches to address the current remaining problems in this field.

3D carbon nanosphere and gold nanoparticle-based voltammetric cytosensor for cell line A549 and for early diagnosis of non-small cell lung cancer cells

An electrochemical cytosensor for the detection of the non-small-cell lung cancer cell line A549 (NSCLC) had been developed. A microwave-hydrothermal method was employed to prepare monodisperse colloidal carbon nanospheres (CNSs). Gold nanoparticles (AuNPs) were placed on the surface of the colloidal CNSs by self-assembly to obtain 3D-structured microspheres of the type CNS@AuNP. The results of an MTT assay show the microspheres to possess good biocompatibility. The CNS@AuNP nanocomposite was then placed, in a chitosan film, on a glassy carbon electrode (GCE). The voltammetric signals and detection sensitivity are significantly enhanced owing to the synergistic effect of CNSs and AuNPs. A cytosensor was then obtained by immobilization of antibody against the carcinoembryonic antigen (which is a biomarker for NSCLC) on the GCE via crosslinking with glutaraldehyde. Hexacyanoferrate is used as an electrochemical probe, and the typical working voltage is 0.2 V (vs. SCE). If exposed to A549 cells, the differential pulse voltammetric signal decreases in the 4.2 × 10^-1 to 4.2 × 10^-6 cells mL^-1 concentration range, and the detection limit is 14 cells mL^-1 (at S/N = 3). Graphical abstract Schematic presentation of design strategy and fabrication process of the electrochemical cytosensor for A549 cells. (CNS: carbon nanospheres; GA: glutaraldehyde; PEI: polyethyleneimine; AuNPs: gold nanoparticles; BSA: Bovine serum albumin).

Detection of Alpha-Fetoprotein in Hepatocellular Carcinoma Patient Plasma with Graphene Field-Effect Transistor

The detection of alpha-fetoprotein (AFP) in plasma is important in the diagnosis of hepatocellular carcinoma (HCC) in humans. We developed a biosensor to detect AFP in HCC patient plasma and in a phosphate buffer saline (PBS) solution using a graphene field-effect transistor (G-FET). The G-FET was functionalized with 1-pyrenebutyric acid N-hydroxysuccinimide ester (PBASE) for immobilization of an anti-AFP antibody. AFP was detected by assessing the shift in the voltage of the Dirac point (ΔV_Dirac) after binding of AFP to the anti-AFP-immobilized G-FET channel surface. This anti-AFP-immobilized G-FET biosensor was able to detect AFP at a concentration of 0.1 ng mL⁻¹ in PBS, and the detection sensitivity was 16.91 mV. In HCC patient plasma, the biosensor was able to detect AFP at a concentration of 12.9 ng mL⁻¹, with a detection sensitivity of 5.68 mV. The sensitivity (ΔV_Dirac) depended on the concentration of AFP in either PBS or HCC patient plasma. These data suggest that G-FET biosensors could have practical applications in diagnostics.

Bioelectronics with nanocarbons

Characterizing the electrical activity of cardiomyocytes and neurons is crucial in understanding the complex processes in the heart and brain tissues, both in healthy and diseased states. Micro- and nanotechnologies have significantly improved the electrophysiological investigation of cellular networks. Carbon-based nanomaterials or nanocarbons, such as carbon nanotubes (CNTs), nanodiamonds (NDs) and graphene are promising building blocks for bioelectronics platforms owing to their outstanding chemical and physical properties. In this review, we discuss the various bioelectronics applications of nanocarbons and their derivatives. Furthermore, we touch upon the challenges that remain in the field and describe the emergence of carbon-based hybrid-nanomaterials that will potentially address those limitations, thus improving the capabilities to investigate the electrophysiology of excitable cells, both as a network and at the single cell level.