Simultaneous Determination of Human Enterovirus 71 and Coxsackievirus B3 by Dual-Color Quantum Dots and Homogeneous Immunoassay

Exploring the landscape of FRET-based molecular sensors: Design strategies and recent advances in emerging applications

Probing biological processes in living organisms that could provide one-of-a-kind insights into real-time alterations of significant physiological parameters is a formidable task that calls for specialized analytic devices. Classical biochemical methods have significantly aided our understanding of the mechanisms that regulate essential biological processes. These methods, however, are typically insufficient for investigating transient molecular events since they focus primarily on the end outcome. Fluorescence resonance energy transfer (FRET) microscopy is a potent tool used for exploring non-invasively real-time dynamic interactions between proteins and a variety of biochemical signaling events using sensors that have been meticulously constructed. Due to their versatility, FRET-based sensors have enabled the rapid and standardized assessment of a large array of biological variables, facilitating both high-throughput research and precise subcellular measurements with exceptional temporal and spatial resolution. This review commences with a brief introduction to FRET theory and a discussion of the fluorescent molecules that can serve as tags in different sensing modalities for studies in chemical biology, followed by an outlining of the imaging techniques currently utilized to quantify FRET highlighting their strengths and shortcomings. The article also discusses the various donor-acceptor combinations that can be utilized to construct FRET scaffolds. Specifically, the review provides insights into the latest real-time bioimaging applications of FRET-based sensors and discusses the common architectures of such devices. There has also been discussion of FRET systems with multiplexing capabilities and multi-step FRET protocols for use in dual/multi-analyte detections. Future research directions in this exciting field are also mentioned, along with the obstacles and opportunities that lie ahead.

Biosensors for waterborne virus detection: Challenges and strategies

Waterborne viruses that can be harmful to human health pose significant challenges globally, affecting health care systems and the economy. Identifying these waterborne pathogens is essential for preventing diseases and protecting public health. However, handling complex samples such as human and wastewater can be challenging due to their dynamic and complex composition and the ultralow concentration of target analytes. This review presents a comprehensive overview of the latest breakthroughs in waterborne virus biosensors. It begins by highlighting several promising strategies that enhance the sensing performance of optical and electrochemical biosensors in human samples. These strategies include optimizing bioreceptor selection, transduction elements, signal amplification, and integrated sensing systems. Furthermore, the insights gained from biosensing waterborne viruses in human samples are applied to improve biosensing in wastewater, with a particular focus on sampling and sample pretreatment due to the dispersion characteristics of waterborne viruses in wastewater. This review suggests that implementing a comprehensive system that integrates the entire waterborne virus detection process with high-accuracy analysis could enhance virus monitoring. These findings provide valuable insights for improving the effectiveness of waterborne virus detection, which could have significant implications for public health and environmental management.

Potential relevance of salivary legumain for the clinical diagnostic of hand, foot, and mouth disease

The fight against hand, foot, and mouth disease (HFMD) remains an arduous challenge without existing point-of-care (POC) diagnostic platforms for accurate diagnosis and prompt case quarantine. Hence, the purpose of this salivary biomarker discovery study is to set the fundamentals for the realization of POC diagnostics for HFMD. Whole salivary proteome profiling was performed on the saliva obtained from children with HFMD and healthy children, using a reductive dimethylation chemical labeling method coupled with high-resolution mass spectrometry-based quantitative proteomics technology. We identified 19 upregulated (fold change = 1.5-5.8) and 51 downregulated proteins (fold change = 0.1-0.6) in the saliva samples of HFMD patients in comparison to that of healthy volunteers. Four upregulated protein candidates were selected for dot blot-based validation assay, based on novelty as biomarkers and exclusions in oral diseases and cancers. Salivary legumain was validated in the Singapore (n = 43 healthy, 28 HFMD cases) and Taiwan (n = 60 healthy, 47 HFMD cases) cohorts with an area under the receiver operating characteristic curve of 0.7583 and 0.8028, respectively. This study demonstrates the feasibility of a broad-spectrum HFMD POC diagnostic test based on legumain, a virus-specific host systemic signature, in saliva.

Multiplex Sensing Based on Plasmonic Optics of Noble Metallic Nanostructures

Since the colorimetric method has the characteristics of being simple and low cost, the fluorescence spectrum has the characteristics of a strong signal, and Surface-enhanced Raman scattering (SERS) detection has the characteristics of high sensitivity and strong specificity, people usually use these three methods for detection, but the detection of a single sample takes more time. If multiple samples can be tested at the same time, the detection efficiency and sensitivity can be improved, and the selectivity and reliability will be greatly improved. Multiplex sensing also provides a new direction for researchers. To fully understand the research of multiplex sensing based on the plasmonic optics of noble metal nanostructures, this review summarizes all the results previously reported in this field. It also discusses the principles of various detection methods and the biochemical application of multiple detections and finally summarizes the challenges and prospects.

Antiviral potential of nanoparticles for the treatment of Coronavirus infections

BACKGROUND

On 31st December 2019 in Wuhan, China, severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), was acknowledged. This virus spread quickly throughout the world causing a global pandemic. The World Health Organization declared COVID-19 a pandemic disease on 11th March 2020. Since then, the whole world has come together and have developed several vaccines against this deadly virus. Similarly, several alternative searches for pandemic disease therapeutics are still ongoing. One of them has been identified as nanotechnology. It has demonstrated significant promise for detecting and inhibiting a variety of viruses, including coronaviruses. Several nanoparticles, including gold nanoparticles, silver nanoparticles, quantum dots, carbon dots, graphene oxide nanoparticles, and zinc oxide nanoparticles, have previously demonstrated remarkable antiviral activity against a diverse array of viruses.

OBJECTIVE

This review aims to provide a basic and comprehensive overview of COVID-19's initial global outbreak and its mechanism of infiltration into human host cells, as well as the detailed mechanism and inhibitory effects of various nanoparticles against this virus. In addition to nanoparticles, this review focuses on the role of several antiviral drugs used against COVID-19 to date.

CONCLUSION

COVID-19 has severely disrupted the social and economic lives of people all over the world. Due to a lack of adequate medical facilities, countries have struggled to maintain control of the situation. Neither a drug nor a vaccine has a 100% efficacy rate. As a result, nanotechnology may be a better therapeutic alternative for this pandemic disease.

Technologies for Frugal and Sensitive Point-of-Care Immunoassays

Immunoassays are a powerful tool for sensitive and quantitative analysis of a wide range of biomolecular analytes in the clinic and in research laboratories. However, enzyme-linked immunosorbent assay (ELISA)-the gold-standard assay-requires significant user intervention, time, and clinical resources, making its deployment at the point-of-care (POC) impractical. Researchers have made great strides toward democratizing access to clinical quality immunoassays at the POC and at an affordable price. In this review, we first summarize the commercially available options that offer high performance, albeit at high cost. Next, we describe strategies for the development of frugal POC assays that repurpose consumer electronics and smartphones for the quantitative detection of analytes. Finally, we discuss innovative assay formats that enable highly sensitive analysis in the field with simple instrumentation.

A review on colorimetric assays for DNA virus detection

Early detection is one of the ways to deal with DNA virus widespread prevalence, and it is necessary to know new diagnostic methods and techniques. Colorimetric assays are one of the most advantageous methods in detecting viruses. These methods are based on color change, which can be seen either with the naked eye or with special devices. The aim of this study is to introduce and evaluate effective colorimetric methods based on amplification, nanoparticle, CRISPR/Cas, and Lateral flow in the diagnosis of DNA viruses and to discuss the effectiveness of each of the updated methods. Compared to the other methods, colorimetric assays are preferred for faster detection, high efficiency, cheaper cost, and high sensitivity and specificity. It is expected that the spread of these viruses can be prevented by identifying and developing new methods.

Advanced Nanomaterials for Preparedness Against (Re-)Emerging Viral Diseases

While the coronavirus disease (COVID-19) accounts for the current global pandemic, the emergence of other unknown pathogens, named "Disease X," remains a serious concern in the future. Emerging or re-emerging pathogens continue to pose significant challenges to global public health. In response, the scientific community has been urged to create advanced platform technologies to meet the ever-increasing needs presented by these devastating diseases with pandemic potential. This review aims to bring new insights to allow for the application of advanced nanomaterials in future diagnostics, vaccines, and antiviral therapies, thereby addressing the challenges associated with the current preparedness strategies in clinical settings against viruses. The application of nanomaterials has advanced medicine and provided cutting-edge solutions for unmet needs. Herein, an overview of the currently available nanotechnologies is presented, highlighting the significant features that enable them to control infectious diseases, and identifying the challenges that remain to be addressed for the commercial production of nano-based products is presented. Finally, to conclude, the development of a nanomaterial-based system using a "One Health" approach is suggested. This strategy would require a transdisciplinary collaboration and communication between all stakeholders throughout the entire process spanning across research and development, as well as the preclinical, clinical, and manufacturing phases.

Graphene Oxide-Based Simple and Rapid Detection of Antibiotic Resistance Gene via Quantum Dot-Labeled Zinc Finger Proteins

With the increasing rise of antibiotic-resistant pathogens, a simple and rapid detection of antibiotic resistance gene (ARG) is crucial to mitigate the spreading of antibiotic resistance. DNA-binding zinc finger proteins (ZFPs) can be engineered to recognize specific double-stranded (ds) DNA sequences in ARG. Here, we designed a simple and rapid method to detect ARG in bacteria utilizing engineered ZFPs and 2D nanosheet graphene oxide (GO) as a sensing platform. Our approach relies on the on and off effect of fluorescence signal in the presence and absence of target ARG, respectively. By taking advantage of the unique quenching capability of GO due to its electronic property, quantum dot (QD)-labeled ZFPs are adsorbed onto the GO sheets, and their fluorescence signal is quenched by proximal GO sheets through fluorescence resonance energy transfer (FRET). In the presence of target DNA, ZFP binding to the target DNA induces dissociation from GO, thereby restoring the fluorescence signal. Our system detects target DNA through restoration of QD emission as the restored signal increases directly with target DNA concentrations. Engineered ZFPs were able to detect specific dsDNA of the tetracycline resistance gene tetM with high specificity after only 10 min incubation on our GO-based sensing system. Our sensing system employed one-step FRET-based ZFP and GO combined technology to enable rapid and quantitative detection of ARG, providing a limit of detection as low as 1 nM. This study demonstrated the application of GO in conjunction with engineered DNA-binding domains for the direct detection of dsDNA with great potential as a rapid and reliable screening and detecton method against the growing threat of antibiotic resistant bacteria.

Fluorescent reversible regulation of cysteamine-capped ZnSe quantum dots successively induced by photoinduced electron transfer of herring sperm DNA and intercalation binding of ethidium bromide

A fluorescent reversible regulation was studied by fluorescence spectra, ultraviolet-visible spectra in the combination of molecular docking, which based on the photoinduced electron transfer(PET) from hsDNA (herring sperm DNA) to CA (cysteamine)-capped ZnSe QDs (quantum dots) and intercalation of ethidium bromide (EB) into hsDNA. It was proven that the QDs bound with the adding hsDNA by electrostatic force and formed 1:1 hsDNA-QDs complexes, leading to the PET from hsDNA to QDs, and consequently the fluorescence quenching of the QDs; with EB being added in the complex solution, it bound with hsDNA by intercalation interaction and caused hsDNA releasing from hsDNA-QDs complex with forming 2.5:1 EB-hsDNA complex, leading to the recovery of fluorescence, based on the greater binding constant (1.74 × 106 L·mol-1) of hsDNA with the embedded EB comparing to that of QDs with the captured hsDNA (4.25 × 104 L·mol-1). A good linear relationship existed between the fluorescence recovery yield and the EB concentrations under the range of 1.0-12.0 × 10-6 mol·L-1 with bare interference of related substances. This work provided some useful insights into the study of binding mechanism between DNAs with their intercalators and fluorescence bi-direction regulation, and showed great potential for the determination of trace EB.

Two-Dimensional Material-Based Biosensors for Virus Detection

Viral infections are one of the major causes of mortality and economic losses worldwide. Consequently, efficient virus detection methods are crucial to determine the infection prevalence. However, most detection methods face challenges related to false-negative or false-positive results, long response times, high costs, and/or the need for specialized equipment and staff. Such issues can be overcome by access to low-cost and fast response point-of-care detection systems, and two-dimensional materials (2DMs) can play a critical role in this regard. Indeed, the unique and tunable physicochemical properties of 2DMs provide many advantages for developing biosensors for viral infections with high sensitivity and selectivity. Fast, accurate, and reliable detection, even at early infection stages by the virus, can be potentially enabled by highly accessible surface interactions between the 2DMs and the analytes. High selectivity can be obtained by functionalization of the 2DMs with antibodies, nucleic acids, proteins, peptides, or aptamers, allowing for specific binding to a particular virus, viral fingerprints, or proteins released by the host organism. Multiplexed detection and discrimination between different virus strains are also feasible. In this Review, we present a comprehensive overview of the major advances of 2DM-based biosensors for the detection of viruses. We describe the main factors governing the efficient interactions between viruses and 2DMs, making them ideal candidates for the detection of viral infections. We also critically detail their advantages and drawbacks, providing insights for the development of future biosensors for virus detection. Lastly, we provide suggestions to stimulate research in the fast expanding field of 2DMs that could help in designing advanced systems for preventing virus-related pandemics.

An overview of functional nanoparticles as novel emerging antiviral therapeutic agents

Research on highly effective antiviral drugs is essential for preventing the spread of infections and reducing losses. Recently, many functional nanoparticles have been shown to possess remarkable antiviral ability, such as quantum dots, gold and silver nanoparticles, nanoclusters, carbon dots, graphene oxide, silicon materials, polymers and dendrimers. Despite their difference in antiviral mechanism and inhibition efficacy, these functional nanoparticles-based structures have unique features as potential antiviral candidates. In this topical review, we highlight the antiviral efficacy and mechanism of these nanoparticles. Specifically, we introduce various methods for analyzing the viricidal activity of functional nanoparticles and the latest advances in antiviral functional nanoparticles. Furthermore, we systematically describe the advantages and disadvantages of these functional nanoparticles in viricidal applications. Finally, we discuss the challenges and prospects of antiviral nanostructures. This topic review covers 132 papers and will enrich our knowledge about the antiviral efficacy and mechanism of various functional nanoparticles.

Study of Physico-Chemical Changes of CdTe QDs after Their Exposure to Environmental Conditions

The irradiance of ultraviolet (UV) radiation is a physical parameter that significantly influences biological molecules by affecting their molecular structure. The influence of UV radiation on nanoparticles has not been investigated much. In this work, the ability of cadmium telluride quantum dots (CdTe QDs) to respond to natural UV radiation was examined. The average size of the yellow QDs was 4 nm, and the sizes of green, red and orange QDs were 2 nm. Quantum yield of green CdTe QDs-MSA (mercaptosuccinic acid)-A, yellow CdTe QDs-MSA-B, orange CdTe QDs-MSA-C and red CdTe QDs-MSA-D were 23.0%, 16.0%, 18.0% and 7.0%, respectively. Green, yellow, orange and red CdTe QDs were replaced every day and exposed to daily UV radiation for 12 h for seven consecutive days in summer with UV index signal integration ranging from 1894 to 2970. The rising dose of UV radiation led to the release of cadmium ions and the change in the size of individual QDs. The shifts were evident in absorption signals (shifts of the absorbance maxima of individual CdTe QDs-MSA were in the range of 6–79 nm), sulfhydryl (SH)-group signals (after UV exposure, the largest changes in the differential signal of the SH groups were observed in the orange, green, and yellow QDs, while in red QDs, there were almost no changes), fluorescence, and electrochemical signals. Yellow, orange and green QDs showed a stronger response to UV radiation than red ones.

Colorimetric biosensors for point-of-care virus detections

Colorimetric biosensors can be used to detect a particular analyte through color changes easily by naked eyes or simple portable optical detectors for quantitative measurement. Thus, it is highly attractive for point-of-care detections of harmful viruses to prevent potential pandemic outbreak, as antiviral medication must be administered in a timely fashion. This review paper summaries existing and emerging techniques that can be employed to detect viruses through colorimetric assay design with detailed discussion of their sensing principles, performances as well as pros and cons, with an aim to provide guideline on the selection of suitable colorimetric biosensors for detecting different species of viruses. Among the colorimetric methods for virus detections, loop-mediated isothermal amplification (LAMP) method is more favourable for its faster detection, high efficiency, cheaper cost, and more reliable with high reproducible assay results. Nanoparticle-based colorimetric biosensors, on the other hand, are most suitable to be fabricated into lateral flow or lab-on-a-chip devices, and can be coupled with LAMP or portable PCR systems for highly sensitive on-site detection of viruses, which is very critical for early diagnosis of virus infections and to prevent outbreak in a swift and controlled manner.

Self-assembled fluorescent Ce(Ⅲ) coordination polymer as ratiometric probe for HIV antigen detection

The viral capsid protein p24 of human immunodeficiency virus is expressed at different level during viral invasion. Detection of p24 is of great importance in acquired immunodeficiency syndrome monitoring and therapy. A ratiometric probe that is easily-synthesized was constructed based on self-assembled fluorescent Ce(Ⅲ) and fluorescein. Fluorescein was used as reference. Hydrogen peroxide quenches the fluorescence of the Ce(III) easily but does not quench the fluorescence of fluorescein. The mechanism of reaction was discussed. Benefiting from the sensitive response to hydrogen peroxide, this probe was applied for p24 detection in enzyme linked immunoassay. The fluorescence ratio was in a good linear relationship with the concentration of p24, and the detection limit was 1.1 pg mL^-1. This proposed method has shown potential in virus detection with easy operation.

Nanoparticle-Based LDI-MS Immunoassay for the Multiple Diagnosis of Viral Infections

Many serious public health emergencies around the globe are caused by viral epidemics. Thus, developing a reliable method for viral screening is in high demand. Multiplex assays for simultaneous detection and fast screening of high-risk pathogens are especially needed. This study employs metal nanoparticles to generate specific mass spectral signals for different RNA viruses, which enables simultaneous detection of whole viruses by laser desorption/ionization mass spectrometry (LDI-MS). We developed a nanoparticle-based sandwich immunosorbent assay as a sensing platform for the detection of viruses and viral nonstructural protein by LDI-MS. Cellulose acetate membrane (CAM) serves as the substrate for the fabrication of the sandwich immunosorbent assay with the advantages of clean mass spectra and high enrichment of analytes. Antibody-modified metal nanoparticles (Ab-MNPs; M = Au or Ag) act as metallic biocodes for the LDI-MS detection. The signal amplification readout for the virus is through the pulsed laser-induced formation of metal cluster ions ([M _n]⁺; n = 1-3) from the Ab-MNPs which specifically bind on the CAM. Our sensing system is effective for the detection of intact viruses [Enterovirus 71 (EV71) and Japanese encephalitis virus (JEV)], nonstructural protein 1 (NS1) of Zika virus (ZIKV), EV71-spiked human serum samples, and the simultaneous detection of EV71 and ZIKV. Our probe efficiently detects EV71 in real clinical serum samples with >95% agreement with RT-qPCR results. This high-throughput LDI-MS viral detection system is simple, reliable, and high-throughput. We believe this platform has the potential to be employed for the routine screening of patients with viral infections.

Encapsulation of Microorganisms, Enzymes, and Redox Mediators in Graphene Oxide and Reduced Graphene Oxide

Graphene oxide (GO) and reduced graphene oxide (rGO) were demonstrated in the past decade as biocompatible carbon-based materials that could be efficiently used in bioelectrochemical systems (BESs). Specifically, for redox enzyme encapsulation in order to improve electron communication between enzymes and electrodes. The addition of GO to different solvents was shown to cause gelation while still allowing small molecule diffusion through its gel-like matrix. Taking the combination of these traits together, we decided to use GO hydrogels for the encapsulation of enzymes displayed on the surface of yeast in anodes of microbial fuel cells. During our studies we have followed the changes in the physical characteristics of GO upon encapsulation of yeast cells displaying glucose oxidase in the presence of glucose and noted that GO is being rapidly reduced to rGO as a function of glucose concentrations. GO reduction under these conditions served as a proof of electron communication between the surface-displayed enzymes and GO. Hence, we set out to study this phenomenon by the encapsulation of a purified glucose dehydrogenase (in the absence of microbial cells) in rGO where improved electron transfer to the electrode could be observed in the presence of phenothiazone. In this chapter, we describe how these systems were technically constructed and characterized and how a very affordable matrix such as GO could be used to electrically wire enzymes as a good replacement for expensive mediator containing redox active polymers commonly used in BESs.

Paper-based fluorometric immunodevice with quantum-dot labeled antibodies for simultaneous detection of carcinoembryonic antigen and prostate specific antigen

A method is described for simultaneous fluorometric determination of the biomarkers carcinoembryonic antigen (CEA) and prostate specific antigen (PSA) on the same zone of a paper-based immunodevice. Two kinds of CdTe quantum dots, with respective emission peaks at 525 nm and 605 nm under a single excitation wavelength of 272 nm, were used to label the antibodies against CEA and PSA. Then the capture antibodies of CEA and PSA were immobilized on the same zone of the paper-based device. With the difference of the colors of the quantum dot fluorescence (green and orange), CEA and PSA can be detected on the same zone of the paper-based device. By using of sandwich immunoassay format, CEA and PSA can be simultaneously detected in human serum samples with a linear response in the 1.0-40 ng·mL^-1 concentration range for both. The recovery rates of the serum sample were in the range of 95-105%. The method has the potential of being applied to the simultaneous determination of various other kinds of substances on a single multichannel paper-based chip. Graphical abstract Schematic presentation of the simultaneous fluorometric detection of two cancer biomarkers on the same zone of the paper-based immunodevice is provided. Two kinds of CdTe quantum dots with different emission peaks under the same excitation wavelength are labeled on different detection antibodies.

A potentiometric immunosensor for enterovirus 71 based on bis-MPA-COOH dendrimer-doped AgCl nanospheres with a silver ion-selective electrode

Herein a new potentiometric immunoassay for the point-of-care detection of enterovirus 71 (EV71) was developed by using a silver (Ag⁺) ion-selective electrode (ISE). Initially, the carboxylated dendrimer-doped AgCl nanospheres were synthesized by the reverse micelle method. Then the synthesized nanospheres were used to label a polyclonal mouse anti-EV71 antibody via a typical carbodiimide coupling method. The immunoreaction was executed on a monoclonal anti-EV71 antibody-coated microplate by using biofunctional AgCl nanospheres as the detection antibody. With a sandwich-type immunoassay format, the carried AgCl nanospheres could be dissolved in the presence of NH₃·H₂O, and the released silver ions were determined with an external silver ion-selective electrode. Under optimal conditions, the shift in the potential increased with the increase in the EV71 concentration, in a wide linear range of 0.3-300 ng mL^-1, with a detection limit of 0.058 ng mL^-1. Intra- and inter-assay relative standard deviations with identical batches were less than 4.15% and 6.15%, respectively. By validating the spiked serum samples, our system shows consistency with the enzyme-linked immunosorbent assay (ELISA) kit.

Simultaneous label-free screening of G-quadruplex active ligands from natural medicine via a microfluidic chip electrophoresis-based energy transfer multi-biosensor strategy

Rapid screening of active compounds plays a crucial role in the research and application of complex natural medicines. Herein, a new method of simultaneous label-free multi-drug screening based on a selective aptamer-carboxyfluorescein/graphene oxide energy transfer optical sensor combined with microfluidic chip electrophoretic separation is reported. In this study, seven traditional Chinese medicinal monomers were chosen as targets for the screening of G-quadruplex ligands. The screening results of the G-quadruplex active ligands, including daidzein, berberine hydrochloride, jatrorrhizine hydrochloride, and fangchinoline, and non-active ligands, including geniposide and oxymatrine, were consistent with those reported in literature. Moreover, one new potential G4DNA active drug, jujuboside A, was identified. Molecular simulation of the interaction between G4DNA and drugs was also carried out using HyperChem and AutoDock to verify the results of the experimental screening. It further demonstrated the reliability of our strategy. This novel separation and concentration based multi-sensing strategy provides a simple, rapid, and sensitive tool for simultaneous multi-drug screening, which is very meaningful for drug screening and bio-interaction analysis.

Development of a single-step immunoassay microdevice based on a graphene oxide-containing hydrogel possessing fluorescence quenching and size separation functions

An immunoassay, which is an indispensable analytical method both in biological research and in medical fields was successfully integrated into a "single-step" by developing a microdevice composed of a graphene oxide (GO)-containing hydrogel and a poly (dimethylsiloxane) (PDMS) microchannel array with a polyethylene glycol (PEG) coating containing a fluorescently-labelled antibody. Here we used 2-hydroxyethylmethacrylate (HEMA) as a monomer that is easily, and homogeneously, mixed with GO to synthesize the hydrogel. The fluorescence quenching and size separation functions were then optimized by controlling the ratios of HEMA and GO. Free fluorescently-labelled antibody was successfully separated from the immunoreaction mixture by the hydrogel network structure, and the fluorescence was subsequently quenched by GO. In comparison to the previously reported immunoassay system using GO, the present system achieved a very high fluorescence resonance energy transfer (FRET) efficiency (∼90%), due to the use of direct adsorption of the fluorescently-labelled antibody to the GO surface; in contrast, the former reported method relied on indirect adsorption of the fluorescently-labelled antibody via immunocomplex formation at the GO surface. Finally, the single-step immunoassay microdevice was made by combining the developed hydrogel and the PDMS microchannel with a coating containing the fluorescently-labelled antibody, and successfully applied for the single-step analysis of IgM levels in diluted human serum by simple introduction of the sample via capillary action.

Polyelectrolyte-protected Dual-color-quantum-dot Assembled Silica Nanoparticles and Their Application in Simultaneous Fluorescence Determination of e Antigen and Surface Antigen of Hepatitis B

Cationic poly-diallyldimethylammonium (PDADMAC), green CdTe quantum dots (QDs) or red CdS coated CdTe QDs, and anionic polyacrylic acid (PAA) were respectively assembled on the nano-carrier SiO₂ to prepare green fluorescence composite nanoparticles (GF-QDs) and red ones (RF-QDs) with the structure SiO₂/PDADMAC/QD/PDADMAC/PAA. The sandwich structure "PDADMAC/QD/PDADMAC" on the nano-carrier not only realized the protection to fluorescence of QDs but also avoided the fluorescence shielding of silica shell for the assembled QDs. In 7 days, the diluent solutions of GF-QD and RF-QD all have a very stable fluorescence. On the contrary, the fluorescence of diluent solutions of red and green QDs reduced by 75.99 and 94.35%, respectively. Indeed, they have not fluorescent shielding and have a very slight fluorescent enhancement. Based on GF-QD and RF-QD, the simultaneous determination of Hepatitis B e antigen and surface antigen has been established. Their determination in buffer and plasma all showed good precision and accuracy.

Controlled fluorescence quenching by antibody-conjugated graphene oxide to measure tau protein

We report an ultrasensitive immunoassay for tau protein-a key marker of Alzheimer's disease. This sensing platform relies on graphene oxide (GO) surfaces conjugated with anti-human tau antibody to provide quantitative binding sites for the tau protein. The GO quenches standard fluorescein isothiocyanate labelled tau (tau-FITC) when tau protein and tau-FITC are both present and compete for the binding sites. This change in fluorescence signal can be used to quantitate tau protein. In contrast with traditional enzyme-linked immunosorbent assay (ELISA), our method does not require enzyme-linked secondary antibodies for protein recognition nor does it require an enzyme substrate for optical signal generation. This requires fewer reagents and has less systematic error than the antigen-antibody recognition steps in ELISA. Our method has a tau protein detection limit of 0.14 pmol ml^-1 in buffer. This approach could be developed into a promising biosensor for the detection of tau protein and may be useful in the clinical diagnosis of tau-induced neurodegeneration syndromes.

Fluorescent "on-off-on" switching sensor based on CdTe quantum dots coupled with multiwalled carbon nanotubes@graphene oxide nanoribbons for simultaneous monitoring of dual foreign DNAs in transgenic soybean

With the increasing concern of potential health and environmental risk, it is essential to develop reliable methods for transgenic soybean detection. Herein, a simple, sensitive and selective assay was constructed based on homogeneous fluorescence resonance energy transfer (FRET) between CdTe quantum dots (QDs) and multiwalled carbon nanotubes@graphene oxide nanoribbons (MWCNTs@GONRs) to form the fluorescent "on-off-on" switching for simultaneous monitoring dual target DNAs of promoter cauliflower mosaic virus 35s (P35s) and terminator nopaline synthase (TNOS) from transgenic soybean. The capture DNAs were immobilized with corresponding QDs to obtain strong fluorescent signals (turning on). The strong π-π stacking interaction between single-stranded DNA (ssDNA) probes and MWCNTs@GONRs led to minimal background fluorescence due to the FRET process (turning off). The targets of P35s and TNOS were recognized by dual fluorescent probes to form double-stranded DNA (dsDNA) through the specific hybridization between target DNAs and ssDNA probes. And the dsDNA were released from the surface of MWCNTs@GONRs, which leaded the dual fluorescent probes to generate the strong fluorescent emissions (turning on). Therefore, this proposed homogeneous assay can be achieved to detect P35s and TNOS simultaneously by monitoring the relevant fluorescent emissions. Moreover, this assay can distinguish complementary and mismatched nucleic acid sequences with high sensitivity. The constructed approach has the potential to be a tool for daily detection of genetically modified organism with the merits of feasibility and reliability.

Highly Sensitive Naked-Eye Assay for Enterovirus 71 Detection Based on Catalytic Nanoparticle Aggregation and Immunomagnetic Amplification

Development of sensitive, convenient, and cost-effective virus detection product is of great significance to meet the growing demand of clinical diagnosis at the early stage of virus infection. Herein, a naked-eye readout of immunoassay by means of virion bridged catalase-mediated in situ reduction of gold ions and growth of nanoparticles, has been successfully proposed for rapid visual detection of Enterovirus 71 (EV71). Through tailoring the morphologies of the produced gold nanoparticles (GNPs) varying between dispersion and aggregation, a distinguishing color changing was ready for observation. This colorimetric detection assay, by further orchestrating the efficient magnetic enrichment and the high catalytic activity of enzyme, is managed to realize highly sensitive detection of EV71 virions with the limit of detection (LOD) down to 0.65 ng/mL. Our proposed method showed a much lower LOD value than the commercial ELISA for EV71 virion detection. Comparing to the current clinical gold standard polymerase chain reaction (PCR) method, our strategy provided the same diagnostic outcomes after testing real clinical samples. Besides, this strategy has no need of complicated sample pretreatment or expensive instruments. Our presented naked-eye immunoassay method holds a promising prospect for the early detection of virus-infectious disease especially in resource-constrained settings.

Quantitative Fluorescence Quenching on Antibody-conjugated Graphene Oxide as a Platform for Protein Sensing

We created an immunosensing platform for the detection of proteins in a buffer solution. Our sensing platform relies on graphene oxide (GO) nanosheets conjugated with antibodies to provide quantitative binding sites for analyte proteins. When analyte proteins and standard fluorescein-labelled proteins are competing for the binding sites, the assay exhibits quantitative fluorescence quenching by GO for the fluorescein-labelled proteins as determined by the analyte protein concentration. Because of this mechanism, measured fluorescence intensity from unquenched fluorescein-labelled protein was shown to increase with an increasing analyte protein concentration. As an alternative to the conventional enzyme-linked immunosorbent assay (ELISA), our method does not require an enzyme-linked second antibody for protein recognition and the enzyme for optical signal measurement. Thus, it is beneficial with its low cost and fewer systematic errors caused by the series of antigen-antibody recognition steps in ELISA. Immune globulin G (IgG) was introduced as a model protein to test our method and our results showed that the limit of detection for IgG was 4.67 pmol mL^-1 in the buffer solution. This sensing mechanism could be developed into a promising biosensor for the detection of proteins, which would broaden the spectrum of GO applications in both analytical biochemistry and clinical diagnosis.

Multiplexed photoluminescent sensors: towards improved disease diagnostics

This tutorial review highlights the development of multiplexed photoluminescent sensors which can simultaneously detect multiple and diverse biomarkers that exist in a homogenous solution or a single cell, accelerating the progress towards precise disease diagnostics.

Advances in nanomaterials and their applications in point of care (POC) devices for the diagnosis of infectious diseases

Nanotechnology has gained much attention over the last decades, as it offers unique opportunities for the advancement of the next generation of sensing tools. Point-of-care (POC) devices for the selective detection of biomolecules using engineered nanoparticles have become a main research thrust in the diagnostic field. This review presents an overview on how the POC-associated nanotechnology, currently applied for the identification of nucleic acids, proteins and antibodies, might be further exploited for the detection of infectious pathogens: although still premature, future integrations of nanoparticles with biological markers that target specific microorganisms will enable timely therapeutic intervention against life-threatening infectious diseases.

Highly Sensitive Homogeneous Immunoassays Based on Construction of Silver Triangular Nanoplates-Quantum Dots FRET System

With growing concerns about health issues worldwide, elegant sensors with high sensitivity and specificity for virus/antigens (Ag) detection are urgent to be developed. Homogeneous immunoassays (HIA) are an important technique with the advantages of small sample volumes requirement and pretreatment-free process. HIA are becoming more favorable for the medical diagnosis and disease surveillance than heterogeneous immunoassays. An important subset of HIA relies on the effect of fluorescence resonance energy transfer (FRET) via a donor-acceptor (D-A) platform, e.g., quantum dots (QDs) donor based FRET system. Being an excellent plasmonic material, silver triangular nanoplates (STNPs) have unique advantages in displaying surface plasmon resonance in the visible to near infrared spectral region, which make them a better acceptor for pairing with QDs in a FRET-based sensing system. However, the reported STNPs generally exhibited broad size distributions, which would greatly restrict their application as HIA acceptor for high detection sensitivity and specificity purpose. In this work, uniform STNPs and red-emitting QDs are firstly applied to construct FRET nanoplatform in the advanced HIA and further be exploited for analyzing virus Ag. The uniform STNPs/QDs nanoplatform based medical sensor provides a straightforward and highly sensitive method for Ag analysis in homogeneous form.

Nitrogen and Sulfur Codoped Reduced Graphene Oxide as a General Platform for Rapid and Sensitive Fluorescent Detection of Biological Species

Nitrogen (N) and sulfur (S) codoped reduced graphene oxide (N,S-rGO) was synthesized through a facile solvothermal process. The introduction of N and S heteroatoms into GO effectively activated the sp(2)-hybridized carbon lattice and made the material an ideal electron/energy acceptor. Such unique properties enable this material to perform as a general platform for rapid and sensitive detection of various biological species through simple fluorescence quenching and recovering. When quantum dot (QD)-labeled HBV (human being disease-related gene hepatitis B virus DNA) and HIV (human being disease-related gene human immunodeficiency virus DNA) molecular beacon probes were mixed with N,S-rGO, QD fluorescence was quenched; when target HBV and HIV DNA were added, QD fluorescence was recovered. By the recovered fluorescence intensity, the target virus DNA detection limits were reduced to 2.4 nM for HBV and 3.0 nM for HIV with detection time of less than 5 min. It must be stressed out that different viruses in the same homogeneous aqueous media could be discriminated and quantified simultaneously through choosing diverse QD probes with different colors. Moreover, even one mismatched target DNA could be distinguished using this method. When altering the molecular beacon loop domain to protein aptamers, this sensing strategy was also able to detect thrombin and IgE in 5 min with detection limits of 0.17 ng mL(-1) and 0.19 ng mL(-1), respectively, which was far more rapid and sensitive than bare GO-based fluorescence detection strategy.

Partially reduced graphene oxide based FRET on fiber-optic interferometer for biochemical detection

Fluorescent resonance energy transfer (FRET) with naturally exceptional selectivity is a powerful technique and widely used in chemical and biomedical analysis. However, it is still challenging for conventional FRET to perform as a high sensitivity compact sensor. Here we propose a novel ‘FRET on Fiber’ concept, in which a partially reduced graphene oxide (prGO) film is deposited on a fiber-optic modal interferometer, acting as both the fluorescent quencher for the FRET and the sensitive cladding for optical phase measurement due to refractive index changes in biochemical detection. The target analytes induced fluorescence recovery with good selectivity and optical phase shift with high sensitivity are measured simultaneously. The functionalized prGO film coated on the fiber-optic interferometer shows high sensitivities for the detections of metal ion, dopamine and single-stranded DNA (ssDNA), with detection limits of 1.2 nM, 1.3 μM and 1 pM, respectively. Such a prGO based ‘FRET on fiber’ configuration, bridging the FRET and the fiber-optic sensing technology, may serve as a platform for the realization of series of integrated ‘FRET on Fiber’ sensors for on-line environmental, chemical, and biomedical detection, with excellent compactness, high sensitivity, good selectivity and fast response

Photoluminescence Architectures for Disease Diagnosis: From Graphene to Thin-Layer Transition Metal Dichalcogenides and Oxides

Ever since the discovery of graphene, increasing efforts have been devoted to the use of this stellar material as well as the development of other graphene-like materials such as thin-layer transition metal dichalcogenides and oxides (TMD/Os) for a variety of applications. Because of their large surface area and unique optical properties, these two-dimensional materials with a size ranging from the micro- to the nanoscale have been employed as the substrate to construct photoluminescence architectures for disease diagnosis as well as theranostics. These architectures are built through the simple self-assembly of labeled biomolecular probes with the substrate material, leading to signal quenching. Upon the specific interaction of the architecture with a target biomarker, the signal can be spontaneously restored in a reversible manner. Meanwhile, by co-loading therapeutic agents and employing the inherent photo-thermal properties of the material substrates, a combined disease imaging and therapy (theranostics) can be achieved. This review highlights the latest advances in the construction and application of graphene and TMD/O based thin-layer material composites for single-target and multiplexed detection of a variety of biomarkers and theranostics. These versatile material architectures, owing to their ease in preparation, low cost and flexibility in functionalization, provide promising tools for both basic biochemical research and clinical applications.

Applications of graphene and its derivatives in intracellular biosensing and bioimaging

Graphene has a unique planar structure, as well as excellent electronic properties, and has attracted a great deal of interest from scientists.

Detection of adenosine triphosphate in HeLa cell using capillary electrophoresis-laser induced fluorescence detection based on aptamer and graphene oxide

A method for ATP quantification based on dye-labeled aptamer/graphene oxide (aptamer/GO) using capillary electrophoresis-laser induced fluorescence (CE-LIF) detecting technique has been established. In this method, the carboxyfluorescein (FAM)-labelled ATP aptamers were adsorbed onto the surface of GO, leading to the fluorescence quenching of FAM; after the incubation with a limited amount of ATP, stronger affinity between ATP aptamer and ATP resulted in the desorption of aptamers and the fluorescence restoration of FAM. Then, aptamer-ATP complex and excess of aptamer/GO and GO were separated and quantified by CE-LIF detection. It was shown that a linear relation was existing in the CE-LIF peak intensity of aptamer-ATP and ATP concentration in range of 10-700 μM, the regression equation was F=1.50+0.0470C(ATP) (R(2)=0.990), and the limit of detection was 1.28 μM (3S/N, n=5), which was one order magnitude lower than that of detection in solution by fluorescence method. The approach with excellent specificity and reproducibility has been successfully applied to detecting concentration of ATP in HeLa cell.