Development, Characterization, and Application of Paper Spray Ionization

Furfural analysis of aqueous and oily foodstuffs using a single modified paper for combined headspace extraction, derivatization and paper spray mass spectrometry

Furfurals, including 2-furaldehyde, 5-methylfurfural and 5-hydroxymethylfurfural, widely exist in carbohydrate-rich daily foods, and may have toxic effects on humans. Here, a new headspace extraction-paper spray mass spectrometry (HSPS-MS/MS) method was established for furfural detection, in which the extraction and derivatization of volatiles with pre-loaded derivatization agent on paper tips is combined with paper spray mass spectrometry for detection. By this simple and cheap approach, interference of non-volatile matrix compounds is prevented, and the derivatization agent improves electrospray-type ionization efficiency, thus increasing selectivity and sensitivity. The approach was optimized, by investigating positioning during extraction, extraction duration, derivatization agent, addition of internal standard for quantification and finally validated. For this, the developed method was benchmarked against HPLC-UV and could obtain detections limits of 0.32-0.40 μg mL-1 for 2-furaldehyde, 5-methylfurfural and 5-hydroxymethylfurfural in olive oil. Moreover, fast screening of free furfurals in soy sauce, coffees and teas was demonstrated with the HSPS-MS/MS method.

Rapid and sensitive approaches for detecting food fraud: A review on prospects and challenges

Precise and reliable analytical techniques are required to guarantee food quality in light of the expanding concerns regarding food safety and quality. Because traditional procedures are expensive and time-consuming, quick food control techniques are required to ensure product quality. Various analytical techniques are used to identify and detect food fraud, including spectroscopy, chromatography, DNA barcoding, and inotrope ratio mass spectrometry (IRMS). Due to its quick findings, simplicity of use, high throughput, affordability, and non-destructive evaluations of numerous food matrices, NI spectroscopy and hyperspectral imaging are financially preferred in the food business. The applicability of this technology has increased with the development of chemometric techniques and near-infrared spectroscopy-based instruments. The current research also discusses the use of several multivariate analytical techniques in identifying food fraud, such as principal component analysis, partial least squares, cluster analysis, multivariate curve resolutions, and artificial intelligence.

Recent advances in mass spectrometry techniques for atmospheric chemistry research on molecular-level

The Earth's atmosphere is composed of an enormous variety of chemical species associated with trace gases and aerosol particles whose composition and chemistry have critical impacts on the Earth's climate, air quality, and human health. Mass spectrometry analysis as a powerful and popular analytical technique has been widely developed and applied in atmospheric chemistry for decades. Mass spectrometry allows for effective detection, identification, and quantification of a broad range of organic and inorganic chemical species with high sensitivity and resolution. In this review, we summarize recently developed mass spectrometry techniques, methods, and applications in atmospheric chemistry research in the past several years on molecular-level. Specifically, new developments of ion-molecule reactors, various soft ionization methods, and unique coupling with separation techniques are highlighted. The new mass spectrometry applications in laboratory studies and field measurements focused on improving the detection limits for traditional and emerging volatile organic compounds, characterizing multiphase highly oxygenated molecules, and monitoring particle bulk and surface compositions.

Laser Printer Printed Ion Sources for Ambient Ionization Mass Spectrometric Analysis of Volatiles and Semivolatiles

In this study, we demonstrated a facile method to fabricate ion sources using a laser printer for ambient ionization mass spectrometry (MS). Toner spots printed by a printer can readily facilitate ionizing volatile and semivolatile compounds derived from solid or liquid samples for MS analysis. The experimental arrangement involved positioning the toner-printed paper near the inlet of a mass spectrometer, which was subjected to a high electric potential (e.g., -6 kV). Volatile or semivolatile compounds deriving from the sample positioned below the metal inlet of the mass spectrometer were promptly ionized upon activating the mass spectrometer. No direct electrical connection or voltage application was required on the paper substrate. An electric field was established between the toner spot on the paper and the inlet applied with a high voltage to induce the dielectric breakdown of the surrounding air and water molecules. Consequently, ionic species, including electrons and cationic radicals, were generated. Subsequent ion-molecule reactions facilitated the production of protons for ionizing analytes present in the gas phase proximal to the inlet of the mass spectrometer. Deprotonated analytes were detected in the resultant mass spectra when employing the method in negative ion mode. This methodology presents a straightforward approach for analyzing analytes in the gas phase under ambient conditions utilizing an exceptionally uncomplicated experimental setup. In addition, the developed method can be used to detect trace 2,4-dinitrophenol, an explosive, with a limit of detection as low as ∼30 pg.

Forensic application of sandpaper spray ionization mass spectrometry (SPS-MS): Direct analysis of solid pharmaceutical formulations and edible cannabis products

In this work, we employed a new ambient ionization mass spectrometry technique, sandpaper spray mass spectrometry (SPS-MS), as an efficient tool to analyze pills and tablets of pharmaceutical formulations. The following samples were analyzed: regulators of blood pressure, cholesterol, and diabetes, and drugs for the treatment of erectile dysfunction (ED). Additionally, a hard candy of Cannabis sativa containing Δ9-tetrahydrocannabinol (Δ9-THC) and its related isomer cannabidiol (CBD) was also evaluated. The surfaces of the samples, without any prior treatment, were sanded onto triangular-cut sandpaper, and full MS scans (and MS/MS) were acquired in both positive and negative ionization modes. SPS-MS (and MS/MS) allowed for prompt detection of the active pharmaceutical ingredients (APIs) in each formulation. Other components of the formulations, added as excipients, were also tentatively identified. The results described herein indicate that the SPS-MS technique can be applied to fast screening of pills and tablets being potentially used as an efficient tool to detect counterfeit pharmaceutical and illicit products, a current issue of increasing concern.

Rapid analysis of untreated food samples by gel loading tip spray ionization mass spectrometry

Rapid, efficient, versatile, easy-to-use, and non-expensive analytical approaches are globally demanded for food analysis. Many ambient ionization approaches based on electrospray ionization (ESI) have been developed recently for the rapid molecular characterization of food products. However, those approaches mainly suffer from insufficient signal duration for comprehensive chemical characterization by tandem MS analysis. Here, a commercially available disposable gel loading tip is used as a low-cost emitter for the direct ionization of untreated food samples. The most important advantages of our approach include high stability, and durability of the signal (> 10 min), low cost (ca. 0.1 USD per run), low sample and solvent consumption, prevention of tip clogging and discharge, operational simplicity, and potential for automation. Quantitative analysis of sulfapyridine, HMF (hydroxymethylfurfural), and chloramphenicol in real sample shows the limit-of-detection 0.1 μg mL-1, 0.005 μg mL-1, 0.01 μg mL-1; the linearity range 0.1-5 μg mL-1, 0.005-0.25 μg mL-1, 0.01-1 μg mL-1; and the linear fits R2 ≥ 0.980, 0.991, 0.986. Moreover, we show that tip-ESI can also afford sequential molecular ionization of untreated viscous samples, which is difficult to achieve by conventional ESI. We conclude that tip-ESI-MS is a versatile analytical approach for the rapid chemical analysis of untreated food samples.

Advances in Chromatographic and Mass Spectrometric Techniques for Analyzing Reducing Monosaccharides and Their Phosphates in Biological Samples

Reducing monosaccharides and their phosphates are critical metabolites in the central carbon metabolism pathway of living organisms. Variations in their content can indicate abnormalities in metabolic pathways and the onset of certain diseases, necessitating their analysis and detection. Reducing monosaccharides and their phosphates exhibit significant variations in content within biological samples and are present in many isomers, which makes the accurate quantification of reducing monosaccharides and their phosphates in biological samples a challenging task. Various analytical methods such as spectroscopy, fluorescence detection, colorimetry, nuclear magnetic resonance spectroscopy, sensor-based techniques, chromatography, and mass spectrometry are employed to detect monosaccharides and phosphates. In comparison, chromatography and mass spectrometry are highly favored for their ability to simultaneously analyze multiple components and their high sensitivity and selectivity. This review thoroughly evaluates the current chromatographic and mass spectrometric methods used for detecting reducing monosaccharides and their phosphates from 2013 to 2023, highlighting their efficacy and the advancements in these analytical technologies.

Structural Characterization, and Antioxidative and Anti-inflammatory Activities of Phylloxanthobilins in Tropaeolum majus, a Plant with Relevance in Phytomedicine

Tropaeolum majus (garden nasturtium) is a plant with relevance in phytomedicine, appreciated not only for its pharmaceutical activities, but also for its beautiful leaves and flowers. Here, we investigated the phytochemical composition of senescent nasturtium leaves. Indeed, we identified yellow chlorophyll catabolites, also termed phylloxanthobilins, which we show to contribute to the bright yellow color of the leaves in the autumn season. Moreover, we isolated and characterized the phylloxanthobilins from T. majus, and report the identification of a pyro-phylloxanthobilin, so far only accessible by chemical synthesis. We show that the phylloxanthobilins contribute to bioactivities of T. majus by displaying strong anti-oxidative effects in vitro and in cellulo, and anti-inflammatory effects as assessed by COX-1 and COX-2 enzyme inhibition, similar to other bioactive ingredients of T. majus, isoquercitrin, and chlorogenic acid. Hence, phylloxanthobilins could play a role in the efficacy of T. majus in the treatment of urinary tract infections, an established indication of T. majus. With the results shown in this study, we aid in the completion of the phytochemical profile of T. majus by identifying additional bioactive natural products as relevant components of this medicinal plant.

Determination of Sulfites in Dried Fruits by Paper Spray Ionization Tandem Mass Spectrometry

Sulfite, a widely used food additive, is subject to regulated labeling. The extraction of sulfite as the stable hydroxymethylsulfonate (HMS) form and its quantitative analysis by liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been recognized for their good sensitivity, selectivity, and versatility across various food materials. This study aimed to develop a cost-effective and simpler method for sulfite quantitation, while maintaining the superior sensitivity and selectivity of mass spectrometry (MS). To achieve this, we introduced paper spray ionization (PSI), an ambient desorption ionization technique that could achieve the direct measurement of analytes without employing separation. We also employed a novel internal standard (IS) structurally similar to the analyte, replacing the more expensive isotopically labeled IS. Although the PSI-MS/MS method developed in this study exhibited slightly lower analytical performance compared to the conventional LC-MS/MS, it remained effective for sulfite analysis in dried fruits.

Plasma drug screening using paper spray mass spectrometry with integrated solid phase extraction

Drug overdoses have risen dramatically in recent years. We developed a simple nontargeted method using a disposable paper spray cartridge with an integrated solid phase extraction column. This method was used to screen for ~160 fentanyl analogs, synthetic cannabinoids, other synthetic drugs, and traditional drugs of abuse in over 300 authentic overdose samples collected at emergency departments in Indianapolis. A solid phase extraction step was implemented on the paper spray cartridge to enable subnanograms per milliliter synthetic drugs screening in plasma. Analysis was performed on a quadrupole orbitrap mass spectrometer using the sequential window acquisition of all theoretical fragment ion spectra approach in which tandem mass spectrometry was performed using 7 m/z isolation windows in the quadrupole. Calibration curves with isotopically labeled internal standards were constructed for 35 of the most frequently encountered synthetic and traditional illicit drugs by US toxicology labs. Additional qualitative-only drugs in a suspect screening list were also included. Limits of detection in plasma for synthetic cannabinoids ranged from 0.1 to 0.5 and 0.1 to 0.3 ng/mL for fentanyl and its analogs and between 1 and 5 ng/mL for most other drugs. Relative matrix effects were evaluated by determining the variation of the calibration slope in 10 different lots of biofluid and found to be between 3% and 20%. The method was validated on authentic overdose samples collected from two emergency departments in Indianapolis, Indiana, from suspected or known overdoses. Commonly detected synthetic drugs included fentanyl related substances, designer benzodiazepines such as flubromazolam, and the synthetic cannabinoid 5F-PB-22.

Surface charge-induced electrospray for high-throughput analysis of complex samples and electrochemical reaction intermediates using mass spectrometry

Electrospray-related ion sources are promising for direct mass spectrometric analysis of complex samples, but current protocols suffer from complicated components and low analytical sensitivity. Here, we propose a surface charge-induced electrospray ionization (SCIESI) inspired by flashover on an insulator surface under high voltage. This protocol not only effectively avoids contact between the sample solution and metal electrode, but also allows completion of the entire analytical process in less than 40 seconds and limits of detection in the pictogram per milliliter range. SCIESI coupled to mass spectrometry can also be used to monitor electro-chemical processes, and a number of oxidation and reduction reactions have been studied, demonstrating that it is a powerful tool for understanding electrochemical reaction mechanisms.

Therapeutic drug monitoring of clozapine in human serum by high-throughput paper spray mass spectrometry

Introduction

Monitoring the atypical antipsychotic drug clozapine is crucial to ensure patient safety. This article showcases a high-throughput analytical method for measuring clozapine and its primary metabolite norclozapine (N-desmethylclozapine) in serum using paper spray mass spectrometry (PS-MS).

Objectives

This study aimed to assess the viability of a PS-MS method for the rapid measurement of clozapine and norclozapine in human serum samples as an alternative to liquid chromatography mass spectrometry (LC-MS).

Methods

Serum samples were processed by protein precipitation followed by deposition of the supernatant containing labelled internal standards onto paper spray substrates mounted in cartridges. Analytes were then analyzed using a triple quadrupole mass spectrometer equipped with a commercial paper spray ionization source. The results obtained from the patient samples were compared to those from a validated LC-MS assay.

Results

PS-MS calibrations for clozapine and norclozapine were linear (R2 > 0.99) over five days. Between-run precision was below 8 %, and within-run precision did not exceed 10 %. When compared to a validated LC-MS method, the mean bias for 39 patient samples was -9% for clozapine and -1% for norclozapine, with no outliers. Mass spectrometry ion ratio comparisons indicated no interference for patient samples above the lower limit of quantification. There was less than 7 % change in the measured concentrations of both analytes over five days for samples dried on paper substrates. Notably, virtually no maintenance of the MS source was required during this study.

Conclusion

This study illustrates the potential of PS-MS for serum drug monitoring in the clinical laboratory.

Rapid detection of per- and polyfluoroalkyl substances (PFAS) using paper spray-based mass spectrometry

Traditional PFAS analysis by mass spectrometry (MS) is time-consuming, as laborious sample preparation (e.g., extraction and desalting) is necessary. Herein, we report fast detection of PFAS by paper spray (PS)-based MS techniques, which employs a triangular-shaped filter paper for sample loading and ionization (≤ 3 min per sample). In this study, PS-MS was first used for direct PFAS analysis of drinking water, tap water, and wastewater. Interestingly, food package paper materials can be directly cut and examined with PS-MS for possible PFAS contamination. For samples containing salt matrices which would suppress PFAS ion signal, desalting paper spray mass spectrometry (DPS-MS), was shown to be capable of rapidly desalting, ionizing and detecting PFAS species such as per-fluorooctanoic acid (PFOA) and per-fluorosulphonic acid (PFOS). The retention of PFAS on paper substrate while salts being washed away by water is likely due to hydrophilic interaction between the PFAS polar head (e.g., carboxylic acid, sulfonic acid) with the polar filter paper cellulose surface. The DPS-MS method is highly sensitive (limits of detection:1.2-4.5 ppt) and can be applicable for directly analyzing soil extract and soil samples. These results suggest the high potential of PS-MS and the related DPS-MS technique in real-world environmental analysis of PFAS.

Synthetic dyes: A mass spectrometry approach and applications

Synthetic dyes are found in a wide variety of applications today, including but not limited to textiles, foods, and medicine. The analysis of these molecules is pertinent to several fields such as forensics, environmental monitoring, and quality control, all of which require the sensitivity and selectivity of analysis provided by mass spectrometry (MS). Recently, there has been an increase in the implementation of MS evaluation of synthetic dyes by various methods, with the majority of research thus far falling under electrospray ionization and moving toward direct ionization methods. This review covers an overview of the chemistry of synthetic dyes needed for the understanding of MS sample preparation and spectral results, current fields of application, ionization methods, and fragmentation trends and works that have been reported in recent years.

Paper spray mass spectrometry profiling of olive oil unsaponifiable fraction for commercial categories classification

A new method for a fast molecular profiling of olive oil unsaponifiable fraction has been developed. This approach, based on paper spray mass spectrometry, allows obtaining MS data with only a few minutes of analysis and without significant solvent and disposable consumption. Tandem mass spectrometry and high-resolution mass spectrometry experiments have been performed to identify the main ions detected. The MS data coming from the analyses of sixty-three samples of three different olive oil categories: extra virgin olive oil (EVOO), virgin olive oil (VOO), and pomace olive oil (POO), have been used to test the discriminative potential. Both unsupervised (PCA and HCA) and supervised (kNN and LDA) chemometric procedures have been applied with good results in prediction. The same approach was tested using direct infusion mass spectrometry data to confirm the ability of paper spray fingerprinting to classify different olive oils correctly.

Arc-Induced Electrospray Ionization Mass Spectrometry

Arc-induced electrospray ionization mass spectrometry (AESI-MS) was developed during which alternating current electrospray is simply achieved through the arc plasma. The AESI source exploits the arc's temperature and charge properties to generate aerosols consisting of charged microdroplets. The electrospray region, in which organic molecules are contained within microdroplets, partially overlaps with the arc plasma region. Guided by the electric field, these molecules undergo ionization, yielding ionic target analytes. AESI represents a soft ionization method that combines the mechanisms of atmospheric pressure chemical ionization and electrospray ionization, facilitating the ionization of analytes with wide ranging polarities. The precisely targeted spraying area enhances ion entry into the mass analyzer, thereby enabling excellent ionization efficiency. The AESI source exhibits several notable advantages over the electrospray ionization source, including an elevated but comparable level of active species concentrations and types, simplified mass spectra for direct amino acid analysis, high salt tolerance, versatile analysis of compounds with varying polarities, and reliable quantitative analysis of amino acids in complex matrices. Overall, AESI broadens the methodologies employed to generate microdroplets, providing a technological and scientific framework for creating distinctive electrospray ionization techniques.

Selectivity of Explosives Analysis with Ambient Ionization Single Quadrupole Mass Spectrometry: Implications for Trace Detection

Ambient ionization (AI) is a rapidly growing field in mass spectrometry (MS). It allows for the direct analysis of samples without any sample preparation, making it a promising technique for the detection of explosives. Previous studies have shown that AI can be used to detect a variety of explosives, but the exact gas-phase reactions that occur during ionization are not fully understood. This is further complicated by differences in mass spectrometers and individual experimental set ups between researchers. This study investigated the gas-phase ion reactions of five different explosives using a variety of AI techniques coupled to a Waters QDa mass spectrometer to identify selective ions for explosive detection and identification based on the applied ambient ionization technique. The results showed that the choice of the ion source can have a significant impact on the number of ions observed. This can affect the sensitivity and selectivity of the data produced. The findings of this study provide new insights into the gas-phase ion reactions of explosives and could lead to the development of more sensitive and selective AI-based methods for their detection.

Capillary self-aspirating electrospray ionization (CSESI) for convenient and versatile mass spectrometry analysis

Electrospray ionization (ESI) is one of the most widely used ionization techniques, and its simplification can benefit many interested users. In this study, sample introduction by capillary action was studied and used to develop a simple ESI source called capillary self-aspirating electrospray ionization (CSESI). A conventional CSESI source requires only a common capillary of appropriate diameter in addition to the support of high voltage (HV). No pumps and sample loading is needed because the solution can spontaneously climb across the capillary by capillary action. With the proper modification of the glass capillary, the operation of CSESI can be further simplified and efficient. Specifically, cold plasma processing of the capillary creates a more hydrophilic surface that can facilitate sample introduction. Moreover, sputtering a thin platinum layer on the capillary tip makes the application of HV more convenient, and it also eliminates the influence of air bubbles in the capillary to ensure a sustained and stable electrospray. Overall, CSESI exhibits multiple desirable features such as simple structure, self-aspiration ability, low sample consumption, and inherent physical filtration capability. Apart from the routine ESI-MS analysis, it has also been applied in real-time monitoring of the oxidative dimerization of 8-methyl-1,2,3,4-tetrahydroquinoline, as well as direct analysis of muddy soil solutions without pretreatment.

A strategy for the detection of benzodiazepine drugs using low-resolution paper-spray mass spectrometry for harm reduction drug checking

The ability to detect newly emerging substances is of great importance in reducing harms for people who use drugs. New psychoactive substances including novel benzodiazepines in the illicit drug supply have been linked to high rates of overdose deaths while complicating drug checking as an overdose prevention strategy. Paper-spray mass spectrometry (PS-MS) has emerged as a novel strategy to rapidly detect trace components in street drug samples. While targeted, low-resolution PS-MS methods have proven effective, newly emerging substances are often missed. To address this, a method was applied to low-resolution full-scan PS-MS data to aid in the early detection and identification of novel benzodiazepines in the unregulated drug supply. Using the developed method, true positives rates of 0.89 and 0.75 were achieved for bromazolam and etizolam in street samples obtained in a community drug checking service. The applicability of the method was further demonstrated for a novel benzodiazepine, desalkylgidazepam, that has recently emerged in the illicit drug supply.

Swab-in-Capillary Electrospray Ionization and a Miniature Mass Spectrometer for In Situ Drug Analysis

In situ analysis of drugs has been in increasing demand in many fields. As an updated version of capillary-in-capillary electrospray ionization (CC-ESI) developed previously, a disposable swab-in-capillary electrospray ionization (SC-ESI) source was designed in this study. With a micro medical swab for sampling and an integrated filter membrane for online filtration, SC-ESI was able to directly sample and MS analyze complex samples without the need for pretreatment. Coupled with a miniature mass spectrometer, SC-ESI was applied for direct analysis of effective ingredients in therapeutic drugs (in tablet, capsule, and liquid droplet) and drugs in saliva and quantitation of therapeutic drugs in blood. The limits of detection in absolute amounts were obtained as 1 ng for fentanyl and 0.5 ng for cocaine in saliva. Combining with an internal standard method, SC-ESI acquired linear quantitation ranges of 100-5000 ng/mL for imatinib in whole blood and 100-2000 ng/mL for clozapine in serum with high accuracies and precisions. The entire analysis process, from sampling to data acquisition, can be completed in less than 2 min. As demonstrated as a cheap, portable, and sampling-effective ionization source, SC-ESI has shown great potential for in situ drug analysis, especially in border drug screening and clinical therapeutic drug monitoring.

Application of atmospheric pressure field desorption for the analysis of anionic surfactants in commercial detergents

Recent work has shown that field desorption (FD) and field ionization (FI) using activated field emitters may be performed at atmospheric pressure, too. While some limitations apply to atmospheric pressure field desorption (APFD) mass spectrometry (MS), the method can deliver both positive and negative even electron ions of highly polar or ionic compounds. Furthermore, APFD even permits the generation of positive molecular ions of polycyclic aromatic compounds. Here, an application of negative-ion APFD for the analysis of anionic surfactants contained in commercial detergent products for body care, household, and technical uses is presented. The samples include liquid soaps and shower gels, dishwashing liquids, and cooling lubricants. Surfactant solutions in methanol/water or pure methanol at 2-10 µl ml-1 were deposited on commercial 13-µm activated tungsten emitters. The emitters were positioned in front of the atmospheric pressure interface of a Fourier transform-ion cyclotron resonance (FT-ICR) mass spectrometer by means of a slightly modified nano-electrospray ionization (nanoESI) source. The entrance electrode of the interface was set to positive high voltage with respect to the emitter at ground potential. Under these conditions, negative-ion desorption was achieved. The surfactant anions, organic sulfates and organic sulfonates, were characterized by accurate mass-based formula assignments, and in part, by tandem mass spectrometry. The negative-ion APFD spectra were compared to results by negative-ion electrospray ionization (ESI) either obtained using the FT-ICR mass spectrometer or by using a trapped ion mobility-quadrupole-time-of-flight (TIMS-Q-TOF) instrument when product ions of low m/z needed to be detected in tandem MS.

Plastic probe electrospray ionization mass spectrometry developed for rapid fingerprint profile of biological samples without pretreatment

A triangular-shaped flat plastic substrate probe was prepared for direct electrospray ionization mass spectrometry (ESI-MS) for analysis of untreated chemical and biological samples including liquids (Met-Arg-Phe-Ala peptide, reserpine, and dodecyl aldehyde), solids (biological samples, traditional Chinese medicine), and powders (roasted coffee, rhizoma coptidis, lotus plumule, and Schisandra sphenanthera). Quantitative analysis of reserpine in water yielded a detection limit of 1 ng mL-1, dynamic response range within 1-500 ng mL-1, and linearity of signal response ˃0.9925. Compared to the conventional capillary ESI, this plastic probe ESI offers lower cost of analysis (US $0.0056 per probe), higher sensitivity, lower sample consumption, longer signal duration (>6 min), better reproducibility, signal stability, and higher speed of analysis (<10 s per sample, including sample loading). Overall, the results indicate the potential of ESI-MS based on flat plastic probes as a versatile method for simple, sensitive, and stable analysis of untreated biological sample analysis.

Simple Protein Analysis by Droplet Paper Spray Ionization Mass Spectrometry with Polyolefin Silica-Based Paper

Paper spray ionization mass spectrometry (PSI MS) has emerged as a notable method for the rapid analysis of biological samples. However, the typical cellulose-based paper tip is incompatible with protein detection due to the strong interaction between cellulose hydroxyl groups and proteins. In this study, we utilized a commercially available polyolefin-based synthetic paper, Teslin®, as an alternative PSI substrate for simple protein analysis. We have named this method "droplet PSI" MS, as the aqueous protein solution droplet retains its shape on the Teslin® paper tip. For droplet PSI, no further chemical pretreatment was necessary for the Teslin® substrate; the only required preparation was shaping the Teslin® paper into a triangular tip. In droplet PSI MS, protein ion signals were instantly detected from a protein solution droplet upon applying a spray solvent in situ along with high voltage (HV). When compared with conventional PSI MS, our method demonstrated superior sensitivity. The droplet PSI MS utilizing Teslin® also showcased flexibility in real-time observation of protein alterations induced by an acid additive. Additionally, the effects of spray solvent composition and the application method were discussed.

Superhydrophobic Surface Modification of Polymer Microneedles Enables Fabrication of Multimodal Surface-Enhanced Raman Spectroscopy and Mass Spectrometry Substrates for Synthetic Drug Detection in Blood Plasma

Microneedles are widely used substrates for various chemical and biological sensing applications utilizing surface-enhanced Raman spectroscopy (SERS), which is indeed a highly sensitive and specific analytical approach. This article reports the fabrication of a nanoparticle (NP)-decorated microneedle substrate that is both a SERS substrate and a substrate-supported electrospray ionization (ssESI) mass spectrometry (MS) sample ionization platform. Polymeric ligand-functionalized gold nanorods (Au NRs) are adsorbed onto superhydrophobic surface-modified polydimethylsiloxane (PDMS) microneedles through the control of various interfacial interactions. We show that the chain length of the polymer ligands dictates the NR adsorption process. Importantly, assembling Au NRs onto the micrometer-diameter needle tips allows the formation of highly concentrated electromagnetic hot spots, which provide the SERS enhancement factor as high as 1.0 × 106. The micrometer-sized area of the microneedle top and high electromagnetic field enhancement of our system can be loosely compared with tip-enhanced Raman spectroscopy, where the apex of a plasmonic NP-functionalized sharp probe produces high-intensity plasmonic hot spots. Utilizing our NR-decorated microneedle substrates, the synthetic drugs fentanyl and alprazolam are analyzed with a subpicomolar limit of detection. Further analysis of drug-molecule interactions on the NR surface utilizing the Langmuir adsorption model suggests that the higher polarizability of fentanyl allows for a stronger interaction with hydrophilic polymer layers on the NR surface. We further demonstrate the translational aspect of the microneedle substrate for both SERS- and ssESI-MS-based detection of these two potent drugs in 10 drug-of-abuse (DOA) patient plasma samples with minimal preanalysis sample preparation steps. Chemometric analysis for the SERS-based detection shows a very good classification between fentanyl, alprazolam, or a mixture thereof in our selected 10 samples. Most importantly, ssESI-MS analysis also successfully identifies fentanyl or alprazolam in these same 10 DOA plasma samples. We believe that our multimodal detection approach presented herein is a highly versatile detection technology that can be applicable to the detection of any analyte type without performing any complicated sample preparation.

Analysis of 15 anti-obesity drugs in urine using thermal-assisted paper spray mass spectrometry

Anti-obesity drugs, used to suppress appetite and reduce fat absorption, have been circulated and traded illegally worldwide. The traditional methods of liquid chromatography tandem mass spectrometry (LC-MS/MS) and gas chromatography-mass spectrometry (GC-MS) for analyzing these drugs in in vivo samples require complex sample pretreatment and time-consuming procedures. To address this issue, a thermal-assisted paper spray mass spectrometry (PS-MS) method was developed in this study to analyze anti-obesity drugs in raw urine. By incorporating a heat source and optimizing the spray solvent and paper substrate, this technique demonstrates reduced matrix effect and higher sensitivity compared to traditional PS-MS methodology for direct analysis of anti-obesity drugs in urine samples. A temperature range of 100-200 °C can be set for screening anti-obesity drugs in urine samples, with the flexibility to adjust the temperature according to the specific drug being analyzed. The limits of detection (LODs) for these 15 anti-obesity drugs in urine ranged between 1 and 500 ng mL-1. Furthermore, the thermal-assisted PS-MS method exhibited good linearities (R2, 0.9903-0.9997) within the range from 10-100 to 1000 ng mL-1 for the direct quantitation of anti-obesity drugs in urine samples with an internal standard. Therefore, the thermal-assisted PS-MS technique may provide a novel approach for the direct analysis of drugs in complex samples.

Ultra-low current electrospray ionization of chloroform solution for the analysis of perfluorinated sulfonic acids

RATIONALE

Femtoamp and picoamp electrospray ionization (ESI) characteristics of a nonpolar solvent were explored. The direct ESI mass spectrometry analysis of chloroform extract solution enabled rapid analysis of perfluorinated sulfonic acid analytes in drinking water.

METHODS

Neat chloroform solvent and extracts were directly used in a typical wire-in ESI setup using micrometer emitter tips. Ionization currents were measured with femtoamp sensitivity while ramping the spray voltage from 0 to -5000 V. Methanol was used as a comparison to illustrate the characteristics of electrospraying chloroform. The effects of spray voltage and inlet temperature were studied. A liquid-liquid extraction workflow was developed to analyze perfluorooctanoate sulfonate (PFOS) in drinking water using an ion-trap mass spectrometer.

RESULTS

The ionization onset of chloroform solution was 41 ± 17 fA at 300 V. The ionization current gradually increased with voltage while remaining below 100 pA when using voltages up to -5000 V. The ion signal of PFOS was significantly enhanced to improve the limit of detection (LoD) to 25 ppt in chloroform. Coupled with a liquid-liquid extraction workflow, LoD of 0.38-5.1 ppt and a quantitation range of 5-400 ppt were achieved for perfluorinated sulfonic compounds in 1-ml water samples.

CONCLUSIONS

Femtoamp and picoamp modes expand the solvent compatibility range of ESI and can enable quantitative analysis in parts per trillion (ppt) concentrations.

Rapid screening of high-priority N-nitrosamines in pharmaceutical, forensic, and environmental samples with paper spray ionization and filter cone spray ionization-mass spectrometry

RATIONALE

The burgeoning concern of N-nitrosamine (NAM) contamination found in various pharmaceutical compositions has increased the demand for rapid and reliable screening methods to better assess the breadth of the problem. These carcinogenic compounds are also found in food, water, and soil, and they have been used in poison-related homicides.

METHODS

A combination of complementary, ambient ionization methods, paper spray ionization (PSI) and filter cone spray ionization (FCSI)-mass spectrometry (MS), was characterized towards trace-level residue screening of select NAMs (e.g., N-nitrosodimethylamine, N-nitrosodiethylamine, N-nitrosodibutylamine) directly from complex and problematic matrices of interest, including prescription and over-the-counter tablets, drinking water, soil, and consumable goods. Spectral data for analyte confirmation and detection limit studies were collected using a Thermo LCQ Fleet ion trap mass spectrometer.

RESULTS

PSI-MS and FCSI-MS readily produced mass spectral data marked by their simplicity (e.g., predominantly protonated molecular ions observed) and congruence with traditional electrospray ionization mass spectra in under 2 min. per sample. Both methods proved robust to the complex matrices tested, yielding ion signatures for target NAMs, as well as active pharmaceutical ingredients for analyzed tablets, flavorants inherent to food products, etc. Low part-per-million detection limits were observed but were shown dependent on sample composition.

CONCLUSIONS

PSI-MS and FCSI-MS were successful in detecting trace-level NAMS in complex liquid- and solid-phase matrices with little to no prior preparation. This work suggests that these methodologies can provide a means for assessing problematic pharmaceutical adulterants/degradants for expedited quality control, as well as enhancing environmental stewardship efforts and forensic investigations.

Applications of mass spectrometry in cosmetic analysis: An overview

Mass spectrometry (MS) is a crucial tool in cosmetic analysis. It is widely used for ingredient screening, quality control, risk monitoring, authenticity verification, and efficacy evaluation. However, due to the diversity of cosmetic products and the rapid development of MS-based analytical methods, the relevant literature needs a more systematic collation of information on this subject to unravel the true potential of MS in cosmetic analysis. Herein, an overview of the role of MS in cosmetic analysis over the past two decades is presented. The currently used sample preparation methods, ionization techniques, and types of mass analyzers are demonstrated in detail. In addition, a brief perspective on the future development of MS for cosmetic analysis is provided.

Feedback Control of Electrospray with and without an External Liquid Pump Using the Spray Current and the Apex Angle of a Taylor Cone for ESI-MS

An electrospray operated in the steady cone-jet mode is highly stable but the operating state can shift to pulsation or multijet modes owing to changes in flow rate, surface tension, and electrostatic variables. Here, a simple feedback control system was developed using the spray current and the apex angle of a Taylor cone to determine the error signal for correcting the emitter voltage. The system was applied to lock the cone-jet mode operation against external perturbations. For a pump-driven electrospray at a regulated flow rate, the apex angle of the Taylor cone decreased with increasing voltage. In contrast, for a voltage-driven electrospray with low flow resistance, the angle was found to increase with the emitter voltage. A simple algorithm based on iterative learning control was formulated and implemented using a personal computer to automatically correct the emitter voltage in response to the error signal. For voltage-driven electrospray ionization (ESI), the feedback control of the spray current can also be used to regulate the flow rate to an arbitrary value or pattern. Electrospray ionization-mass spectrometry (ESI-MS) with feedback control was demonstrated to produce ion signal acquisition with long-term stability that was insusceptible to the emulated external disturbances.

Bio-phenols determination in olive oils: Recent mass spectrometry approaches

Extra virgin olive oil (EVOO) is largely used in Mediterranean diet, and it is also worldwide apprised not only for its organoleptic properties but also for its healthy effects mainly attributed to the presence of several naturally occurring phenolic and polyphenolic compounds (bio-phenols). These compounds are characterized by the presence of multiple phenolic groups in more or less complex structures. Their content is fundamental in defining the healthy qualities of EVOO and consequently the analytical methods for their characterization and quantification are of current interest. Traditionally their determination has been conducted using a colorimetric assay based on the reaction of Folin-Ciocalteu (FC) reagent with the functional hydroxy groups of phenolic compounds. Identification and quantification of the bio-phenols in olive oils requires certainly more performing analytical methods. Chromatographic separation is now commonly achieved by HPLC, coupled with spectrometric devices as UV, FID, and MS. This last approach constitutes an actual cutting-edge application for bio-phenol determination in complex matrices as olive oils, mostly on the light of the development of mass analyzers and the achievement of high resolution and accurate mass measurement in more affordable instrument configurations. After a short survey of some rugged techniques used for bio-phenols determination, in this review have been described the most recent mass spectrometry-based methods, adopted for the analysis of the bio-phenols in EVOOs. In particular, the sample handling and the results of HPLC coupled with low- and high-resolution MS and MS/MS analyzers, of ion mobility mass spectrometry and ambient mass spectrometry have been reported and discussed.

Advances in fentanyl testing

Fentanyl is a synthetic opioid that was approved by the FDA in the late 1960s. In the decades since, non-prescription use of fentanyl, its analogs, and structurally unrelated novel synthetic opioids (NSO) has become a worsening public health crisis. There is a clear need for accessible testing for these substances in biological specimens and in apprehended drugs. Immunoassays for fentanyl in urine are available but their performance is restricted to facilities that hold moderate complexity laboratory licenses. Immunoassays for other matrices such as oral fluid (OF), blood, and meconium have been developed but are not widely available. Point of care tests (POCT), such as lateral flow immunoassays or fentanyl test strips (FTS), are widely available but not approved by the FDA for clinical use. All immunoassays are vulnerable to false positive and false negative results. Immunoassays may or may not be able to detect fentanyl analogs and NSOs. Mass spectrometry (MS) can accurately and reliably measure fentanyl and its major metabolite norfentanyl in urine and oral fluid. MS is available at reference laboratories and large hospitals. Liquid chromatography paired with tandem mass spectrometry (LC-MS/MS) is the most widely used method and has outstanding specificity and sensitivity for fentanyl and norfentanyl. When compared to immunoassays, MS is more expensive, requires more technical skill, and takes longer to result. Newer mass spectrometry methods can measure fentanyl analogs and NSO. Both mass spectrometry assays and immunoassays [in the form of fentanyl test strips (FTS)] have potential use in harm reduction programs.

From the laboratory to the field: Chemical analysis of colored smoke pyrotechnic formulations via mass spectrometry techniques

Smoke dyes are complex molecular systems that have the potential to form many molecular derivatives and fragments when deployed. The chemical analysis of smoke samples is challenging due to the adiabatic temperature of the pyrotechnic combustion and the molecular complexity of the physically dispersed reaction products. Presented here is the characterization of the reaction byproducts of a simulant Mk124 smoke signal on a multigram scale, which contain the dye disperse red 9 (1-(methylamino)anthraquinone), by ambient ionization mass spectrometry. Our previous work has examined the thermal decomposition of a simplified smoke system consisting of disperse red 9, potassium chlorate, and sucrose by anaerobic pyrolysis gas chromatography mass spectrometry performed at the laboratory milligram scale. The results from the lab scale test were compared with a fully functioned Mk124 in the field. To achieve this, Mk124 smokes were functioned in the presence of sampling swabs that collected byproduct residues from the smoke plume in the ambient environment. These swabs were then analyzed using ambient ionization mass spectrometry to identify the expended pyrotechnic residues, with particular interest in halogenated species. Previous work determined the toxicity of unforeseen byproducts identified on the laboratory scale, which were also detected in the field demonstrating the correlation of the laboratory testing to the fielded systems. By understanding the chemical composition of smokes and their reaction products, potential toxicity effects can be easily assessed, leading to safer formulations with improved performance. These results can help assess how smoke byproducts may impact Warfighter performance, personnel health, and the environment.

On-Demand Portable Paper-Based Electrospray Ionization Mass Spectrometry for High-Sensitivity Analysis of Complex Samples

Paper spray ionization has been demonstrated to be the most promising substrate-based source, but this technique suffers from the low desorption efficiency of target compounds and poor portability. In the current study, we describe a portable paper-based electrospray ionization (PPESI) in which a piece of triangle paper and adsorbent are packed sequentially into a modified disposable micropipette tip. This source not only captures the feature of paper spray and adsorbent for highly efficient suppression of sample matrixes for target compound analysis but also takes advantage of a micropipette tip to prevent spray solvent from rapid evaporation. The performance of developed PPESI depends on the type and amount of packed adsorbent, paper substrate, and spray solvent and applied voltage. Moreover, by contrast to other related sources, the analytical sensitivity and the spray duration of PPESI in tandem with MS have been improved by factors of 2.8-32.3 and 2.0-13.3, respectively. Based on its high accuracy (>96%) and precision (less than 3% relative standard deviation), the PPESI coupled to a mass spectrometer has been used to determine diverse therapeutic drugs and pesticides in complex biological (e.g., whole blood, serum, and urine) and food (e.g., milk and orange juice) matrixes, and the limits of detection and quantification were 2-4 pg mL^-1 and 7-13 pg mL^-1, respectively. Taking the portability, high sensitivity, and repeatability, the technique may be a promising alternative for complex sample analysis.

Automated and High-Throughput Urine Drug Screening Using Paper Spray Mass Spectrometry

Paper spray mass spectrometry (PS-MS) has been shown to be a rapid, simple and inexpensive alternative to traditional forensic drug screening methods. It can address the limitations of both immunoassays and chromatography-based techniques due to its non-reliance on sample preparation and its ability to rapidly screen for a wide array of compounds. In this study, an automated PS-MS system was employed to semi-quantitatively screen for 40 commonly abused drugs and metabolites in urine after a 15-min glucuronidase reaction. The target compounds included common prescription opioids, fentanyl and norfentanyl, stimulants including methamphetamine and cocaine, benzodiazepines and antidepressants. The enzyme, buffer and internal standard solution were combined in one spiking solution to minimize sample handling. Analysis was carried out using a commercially available automated paper spray system coupled to a triple quadrupole mass spectrometer. This method may prove useful for clinical and forensic toxicology laboratories as it allows for automated screening of complex samples for drugs without extraction, separation and sample cleanup.

Assessing the Effectiveness of Chemical Marker Extraction from Amazonian Plant Cupuassu (Theobroma grandiflorum) by PSI-HRMS/MS and LC-HRMS/MS

Employing a combination of liquid chromatography electrospray ionization and paper spray ionization high-resolution tandem mass spectrometry, extracts from cupuassu (Theobroma grandiflorum) pulp prepared with either water, methanol, acetonitrile or combinations thereof were subjected to metabolite fingerprinting. Among the tested extractors, 100% methanol extracted preferentially phenols and cinnamic acids derivatives, whereas acetonitrile and acetonitrile/methanol were more effective in extracting terpenoids and flavonoids, respectively. And while liquid chromatography- mass spectrometry detected twice as many metabolites as paper spray ionization tandem mass spectrometry, the latter proved its potential as a screening technique. Comprehensive structural annotation showed a high production of terpenes, mainly oleanane triterpene derivatives. of the mass spectra Further, five major metabolites with known antioxidant activity, namely catechin, citric acid, epigallocatechin-3′-glucuronide, 5,7,8-trihydroxyflavanone, and asiatic acid, were subjected to molecular docking analysis using the antioxidative enzyme peroxiredoxin 5 (PRDX5) as a model receptor. Based on its excellent docking score, a pharmacophore model of 5,7,8-trihydroxyflavanone was generated, which may help the design of new antioxidants.

On-line aptamer affinity solid-phase extraction direct mass spectrometry for the rapid analysis of α-synuclein in blood

On-line aptamer affinity solid-phase extraction direct mass spectrometry (AA-SPE-MS) is presented for the rapid purification, preconcentration, and characterization of α-synuclein (α-syn), which is a protein biomarker related to Parkinson's disease. Valve-free AA-SPE-MS is easily implemented using the typical SPE microcartridges and instrumental set-up necessary for on-line aptamer affinity solid-phase extraction capillary electrophoresis-mass spectrometry (AA-SPE-CE-MS). The essential requirement is substituting the application of the separation voltage by a pressure of 100 mbar for mobilization of the eluted protein through the capillary towards the mass spectrometer. Under optimized conditions with recombinant α-syn, repeatability is good in terms of migration time and peak area (percent relative standard deviation (%RSD) values (n = 3) are 1.3 and 6.6% at 1 μg mL^-1, respectively). The method is satisfactorily linear between 0.025 and 5 μg mL^-1 (R² > 0.986), and limit of detection (LOD) is 0.02 μg mL^-1 (i.e. 1000, 500, and 10 times lower than by CE-MS, direct MS, and AA-SPE-CE-MS, respectively). The established AA-SPE-MS method is further compared with AA-SPE-CE-MS, including for the analysis of α-syn in blood. The comparison discloses the advantages and disadvantages of AA-SPE-MS for the rapid and sensitive targeted analysis of protein biomarkers in biological fluids.

Paper Spray Mass Spectrometry as an Effective Tool for Differentiating Coffees Based on Their Geographical Origins

With the rising trend of valuing flavor complexity of coffees, means to distinguish the properties of individual coffee sources is vital to the sustainable growth of the coffee industry. Herein, paper spray mass spectrometry (PS-MS), a simple technique with little sample preparation, was used to collect mass data from aqueous extracts of coffees from various sources. Thereafter, principal component analysis and linear discriminant analysis were used to successfully classify coffee samples (with 80-100 % accuracy) from various studies including the differentiations of Arabica and Robusta coffees, Arabica coffees from different countries, Robusta coffees from different geographical locations, and Arabica coffees from different locations within the same province in Thailand. With further insight from significant test via Fisher weight determination, this method was proved to be practical for differentiating coffees based on types and geographical origins, thus paving the way for broader applications.

Desorption of positive and negative ions from activated field emitters at atmospheric pressure

Field desorption (FD) traditionally is an ionization technique in mass spectrometry (MS) that is performed in high vacuum. So far only two studies have explored FD at atmospheric pressure or even superatmospheric pressure, respectively. This work pursues ion desorption from 13-µm activated tungsten emitters at atmospheric pressure. The emitters are positioned in front of the atmospheric pressure interface of a Fourier transform-ion cyclotron resonance (FT-ICR) mass spectrometer and the entrance electrode of the interface is set to 3-5 kV with respect to the emitter. Under these conditions positive, and for the first time, negative ion desorption is achieved. In either polarity, atmospheric pressure field desorption (APFD) is robust and spectra are reproducible. Both singly charged positive and negative ions formed by these processes are characterized by accurate mass-based formula assignments and in part by tandem mass spectrometry. The compounds analyzed include the ionic liquids trihexyl(tetradecyl) phosphonium tris(pentafluoroethyl) trifluorophosphate) and 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, the acidic compounds perfluorononanoic acid and polyethylene glycol diacid, as well as two amino-terminated polypropylene glycols. Some surface mobility on the emitter is prerequisite for ion desorption to occur. While ionic liquids inherently provide this mobility, the desorption of ions from solid analytes requires the assistance of a liquid matrix, e.g. glycerol.

Field-Gradient-Focusing Ion Guide for Enhanced Transfer Efficiency of Low-Mass Ions

Efficient transmission of low-mass ions in a rough vacuum pressure region has always been a challenging issue in mass spectrometry (MS). In this study, a novel ion guide, namely, field-gradient-focusing ion guide (FGF-IG), was proposed to improve the transfer efficiency of ions, especially low-mass ions in a rough vacuum region. The FGF-IG has 12 electrodes whose surfaces gradually narrowed and tilted inward, and its electric field gradually varies from dodecapole (or multipole) to quadrupole along the ion transfer route. The field radius was gradually decreased from 6 to 2 mm in the multipole region (65 mm in length) and finally remained unchanged as 2 mm in the quadrupole region (20 mm in length). By integrating into a miniature mass spectrometer (mini-MS) with a continuous atmospheric pressure interface, this ion guide was optimized in terms of inlet capillary position, radio frequency amplitude, and direct current voltage applied on it. Results showed that a reduced low-mass discrimination effect and improved efficiency of simultaneously transferring mid and low m/z ions were achieved for FGF-IG compared with a conventional ion funnel. Under optimized conditions, a limit of detection of 1 ng/mL was obtained for both reserpine (m/z 609) and arginine (m/z 175) ions by integrating FGF-IG into the mini-MS. The sensitivity of smaller arginine ions using FGF-IG was enhanced by ∼10 times than that obtained using the conventional ion funnel (10 ng/mL) in comparative experiments. The idea of smooth transfer from dodecapole to quadrupole fields could be extended to other multipole fields, as well as in lab-scale MS instruments.

Ambient ionization mass spectrometry applied to new psychoactive substance analysis

In the past decade a plethora of drugs with similar effects to controlled psychoactive drugs, like cannabis, amfetamine (amphetamine), or lysergic acid diethylamide, have been synthesized. These drugs can collectively be classified under the term new psychoactive substances (NPS) and are used for recreational purposes. The novelty of the substances, alongside the rapid rate of emergence and structural variability, makes their detection as well as their legal control highly challenging, increasing the demand for rapid and easy-to-use analytical techniques for their detection and identification. Therefore, interest in ambient ionization mass spectrometry applied to NPS has grown in recent years, which is largely because it is relatively fast and simple to use and has a low operating cost. This review aims to provide a critique of the suitability of current ambient ionization techniques for the analysis of NPS in the forensic and clinical toxicology fields. Consideration is given to analytical performance and ease of implementation, including ionization efficiency, selectivity, sensitivity, quantification, analyte chemistry, molecular coverage, validation, and practicality.

The development and application of matrix assisted laser desorption electrospray ionization: The teenage years

In the past 15 years, ambient ionization techniques have witnessed a significant incursion into the field of mass spectrometry imaging, demonstrating their ability to provide complementary information to matrix-assisted laser desorption ionization. Matrix-assisted laser desorption electrospray ionization is one such technique that has evolved since its first demonstrations with ultraviolet lasers coupled to Fourier transform-ion cyclotron resonance mass spectrometers to extensive use with infrared lasers coupled to orbitrap-based mass spectrometers. Concurrently, there have been transformative developments of this imaging platform due to the high level of control the principal group has retained over the laser technology, data acquisition software (RastirX), instrument communication, and image processing software (MSiReader). This review will discuss the developments of MALDESI since its first laboratory demonstration in 2005 to the most recent advances in 2021.

Accelerated synthesis of phthalimide derivatives: Intrinsic reactivity of diamines towards phthalic anhydride evaluated by paper spray ionization mass spectrometry

RATIONALE

Paper spray (PS) is a simple and innovative ambient ionization technique for mass spectrometry (MS) analysis. Under PS-MS conditions, chemical reactions, which usually occur slowly on a bulk scale, are accelerated. Moreover, the formation of products and transient species can be easily monitored. In this manuscript, reactions between phthalic anhydride and diamines were conducted and monitored using a PS-MS platform. The reaction products (phthalimides) have many pharmaceutical applications, but their traditional syntheses can take hours under reflux, requiring laborious purification steps.

METHODS

In situ reactions were performed by dropping methanolic solutions of phthalic anhydride and diamines on a triangular paper. The analyses were achieved by positioning the triangle tip in front of the mass spectrometer entrance, whereas a metal clip was attached to the triangle base. After adding methanol to the paper, a high voltage was applied across the metal clip, and the mass spectra were acquired.

RESULTS

The intrinsic reactivity of alkyl and aromatic diamines was evaluated. The carbon chain remarkably influenced the reactivity of aliphatic diamines. For aryl diamines, the ortho isomer was the most reactive. Moreover, for aryl amines with electron-withdrawing substituents, no reaction was noticed.

CONCLUSIONS

Taking advantage of the unique characteristics of PS-MS, it was possible to investigate the intrinsic reactivity of model alkyl (ethylene versus propylene) and aryl (o-phenylene versus m-phenylene and p-phenylene) diamines towards phthalic anhydride. Some crucial parameters that affect the intrinsic reactivity of organic molecules, such as isomerism, intramolecular interaction, and conformation, were easily explored.

Hexapole-Assisted Continuous Atmospheric Pressure Interface for a High-Pressure Photoionization Miniature Ion Trap Mass Spectrometer

Miniature mass spectrometers are powerful tools for on-site chemical analysis in the fields of homeland security, personal healthcare, and environmental monitoring. This study presents a novel hexapole-assisted continuous atmospheric pressure interface for a high-pressure photoionization miniature ion trap mass spectrometer (HA-HPPI-IT). Efficient ion transmission was achieved by combining radial focusing by an RF electric field and axial driving by gas flow, which was demonstrated by SIMION simulation and experimental verification. The pressure in the ionization-transmission chamber and the inner diameter of the skimmer were optimized, which helped in determining the number density of product ions and affected the ion transmission in the hexapole, respectively. After systematic optimizations, about 16-fold increase in signal intensity was achieved as the RF amplitude was varied from 140 to 400 V_pp, and a limit of detection of 1 ppbv was obtained. In addition, the HA-HPPI-IT exhibited high stability and the relative standard deviation was as low as 5.47%. Finally, the apparatus was applied for discovering the simulated spot for illicit drug synthesis by detecting toluene and propiophenone released to air and monitoring the evolutions of perchloroethylene residues from dry-cleaned clothes.

Portable mass spectrometry system: instrumentation, applications, and path to 'omics analysis

Mass spectrometry (MS) is an information rich analytical technique and plays a key role in various 'omics studies. Standard mass spectrometers are bulky and operate at high vacuum, which hinder their adoption by the broader community and utility in field applications. Developing portable mass spectrometers can significantly expand the application scope and user groups of MS analysis. This review discusses the basics and recent advancements in the development of key components of portable mass spectrometers including ionization source, mass analyzer, detector, and vacuum system. Further, major areas where portable mass spectrometers are applied are also discussed. Finally, a perspective on the further development of portable mass spectrometers including the potential benefits for 'omics analysis is provided.

Understanding the effect of spatial positioning of coated blade spray devices relative to the mass spectrometry inlet on different instrument platforms and its application to quantitative analysis of fentanyl and related analogs

RATIONALE

We evaluated the effect that the spatial positioning of coated-blade spray (CBS) devices with respect to the mass spectrometry (MS) inlet has when coupling to diverse MS platforms (i.e., triple quadrupole, linear ion trap and time of flight). Furthermore, as a proof of concept, we evaluated CBS-MS as a tool for quantitation of fentanyl and four analogues on said instruments.

METHODS

Custom-made MS interfaces were made to accurately position the blade in front of the MS inlet. CBS devices, coated with hydrophilic-lipophilic balanced particles, were used for both the optimization of the CBS position and the quantitation of fentanyl and analogues in urine and plasma samples on all instruments.

RESULTS

The SCIEX triple quadrupole instrument was the most sensitive to the position of the blade due to the presence of a curtain gas flowing laminarly out of the MS inlet. After optimization, the analytical capabilities of CBS on each instrument were assessed and the results obtained on both SCIEX and Waters platforms matched the performance obtained using a more advanced instrument by ThermoFisher Scientific. Furthermore, excellent figures of merit were attained for the quantitation of fentanyl and analogues on both triple quadrupole and linear ion trap platforms.

CONCLUSIONS

We demonstrated that optimization of MS parameters on different instrument vendors and front ends, such as the position of the CBS tip regarding the MS inlet, is vital to exploit the full quantitative potential of this technology. Application of the technology to screen and quantify fentanyl and analogues showed great potential when considering its coupling with portable mass spectrometers for therapeutic drug monitoring and point-of-care applications.

Capillary Vibrating Sharp-Edge Spray Ionization Augments Field-Free Ionization Techniques to Promote Conformer Preservation in the Gas-Phase for Intractable Biomolecular Ions

Field-free capillary vibrating sharp-edge spray ionization (cVSSI) is evaluated for its ability to conduct native mass spectrometry (MS) experiments. The charge state distributions for nine globular proteins are compared using field-free cVSSI, field-enabled cVSSI, and electrospray ionization (ESI). In general, for both positive and negative ion mode, the average charge state (qavg) increases for field-free cVSSI with increasing molecular weight similar to ESI. A clear difference is that the qavg is significantly lower for field-free conditions in both analyses. Two proteins, leptin and thioredoxin, exhibit bimodal charge state distributions (CSDs) upon the application of voltage in positive ion mode; only a monomodal distribution is observed for field-free conditions. In negative ion mode, thioredoxin exhibits a multimodal CSD upon the addition of voltage to cVSSI. Extensive molecular dynamics (MD) simulations of myoglobin and leptin in nanodroplets suggest that the multimodal CSD for leptin may originate from increased conformational "breathing" (decreased packing) and association with the droplet surface. These properties along with increased droplet charge appear to play critical roles in shifting ionization processes for some proteins. Further exploration and development of field-free cVSSI as a new ionization source for native MS especially as applied to more flexible biomolecular species is warranted.