The Fate of the Peroxyl Radical in Autoxidation: How Does Polymer Degradation Really Occur?

Porphyrin as Photosensitizers for Controlling Marine Biodegradation of Polymer Composites

Biodegradable polymer-photosensitizer composites were developed, which is suppressed biodegradation due to bactericidal activity under light irradiation but proceeds under dark conditions. The composites exhibited antibacterial activity under light irradiation, which was attributed to the generation of singlet oxygen (1O2). Biodegradation was evaluated in seawater using the biochemical oxygen demand (BOD) method. In the dark, the composite and base polymer biodegraded to a similar degree. However, under light irradiation, the biodegradation of the composite was suppressed. In field tests, the rate of volume reduction of the composites decreased under illumination. The main cause of the suppression of biodegradation is suggested to be due to the decrease in the number of bacteria on the surface of the material and the inactivation of exoenzymes. The findings are expected to contribute to the development of biodegradable polymers that do not biodegrade during use but only when disposed of in the environment, thereby achieving on-demand degradation.

Oxidative stress modulating nanomaterials and their biochemical roles in nanomedicine

Many pathological conditions are predominantly associated with oxidative stress, arising from reactive oxygen species (ROS); therefore, the modulation of redox activities has been a key strategy to restore normal tissue functions. Current approaches involve establishing a favorable cellular redox environment through the administration of therapeutic drugs and redox-active nanomaterials (RANs). In particular, RANs not only provide a stable and reliable means of therapeutic delivery but also possess the capacity to finely tune various interconnected components, including radicals, enzymes, proteins, transcription factors, and metabolites. Here, we discuss the roles that engineered RANs play in a spectrum of pathological conditions, such as cancer, neurodegenerative diseases, infections, and inflammation. We visualize the dual functions of RANs as both generator and scavenger of ROS, emphasizing their profound impact on diverse cellular functions. The focus of this review is solely on inorganic redox-active nanomaterials (inorganic RANs). Additionally, we deliberate on the challenges associated with current RANs-based approaches and propose potential research directions for their future clinical translation.

Catalytic Upcycling of Polyolefins

The large production volumes of commodity polyolefins (specifically, polyethylene, polypropylene, polystyrene, and poly(vinyl chloride)), in conjunction with their low unit values and multitude of short-term uses, have resulted in a significant and pressing waste management challenge. Only a small fraction of these polyolefins is currently mechanically recycled, with the rest being incinerated, accumulating in landfills, or leaking into the natural environment. Since polyolefins are energy-rich materials, there is considerable interest in recouping some of their chemical value while simultaneously motivating more responsible end-of-life management. An emerging strategy is catalytic depolymerization, in which a portion of the C-C bonds in the polyolefin backbone is broken with the assistance of a catalyst and, in some cases, additional small molecule reagents. When the products are small molecules or materials with higher value in their own right, or as chemical feedstocks, the process is called upcycling. This review summarizes recent progress for four major catalytic upcycling strategies: hydrogenolysis, (hydro)cracking, tandem processes involving metathesis, and selective oxidation. Key considerations include macromolecular reaction mechanisms relative to small molecule mechanisms, catalyst design for macromolecular transformations, and the effect of process conditions on product selectivity. Metrics for describing polyolefin upcycling are critically evaluated, and an outlook for future advances is described.

Overlooked Roles and Transformation of Carbon-Centered Radicals Produced from Natural Organic Matter in a Thermally Activated Persulfate System

The presence and induced secondary reactions of natural organic matter (NOM) significantly affect the remediation efficacy of in situ chemical oxidation (ISCO) systems. However, it remains unclear how this process relates to organic radicals generated from reactions between the NOM and oxidants. The study, for the first time, reported the vital roles and transformation pathways of carbon-centered radicals (CCR•) derived from NOM in activated persulfate (PS) systems. Results showed that both typical terrestrial/aquatic NOM isolates and collected NOM samples produced CCR• by scavenging activated PS and greatly enhanced the dehalogenation performance under anoxic conditions. Under oxic conditions, newly formed CCR• could be oxidized by O2 and generate organic peroxide intermediates (ROO•) to catalytically yield additional •OH without the involvement of PS. Nuclear magnetic resonance (NMR) and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) results indicated that CCR• predominantly formed from carboxyl and aliphatic structures instead of aromatics within NOM through hydrogen abstraction and decarboxylation reactions by SO4•- or •OH. Specific anoxic reactions (i.e., dehalogenation and intramolecular cross-coupling reactions) further promoted the transformation of CCR• to more unsaturated and polymerized/condensed compounds. In contrast, oxic propagation of ROO• enhanced bond breakage/ring cleavage and degradation of CCR• due to the presence of additional •OH and self-decomposition. This study provides novel insights into the role of NOM and O2 in ISCO and the development of engineered strategies for creating organic radicals capable of enhancing the remediation of specific contaminants and recovering organic carbon.

The autoxidation of polyether-polyurethane open cell soft foam: An analytical aging method to reproducibly determine VOC emissions caused by thermo-oxidative degradation

We present a new method for investigating the oxidation and emission behavior of air-permeable materials. Employing this method, a differentiated statement can be made about the extent to which critical volatile organic compounds (VOCs) such as formaldehyde, acetaldehyde, and acrolein are contained in the material as impurities or formed by thermo-oxidative degradation of the polymer matrix in the use phase. The parameters affecting methods of VOC analysis are reviewed and considered for the developed method. The molecular mechanisms of VOC formation are discussed. Toxicological implications of the reaction kinetics are put into context with international guidelines and threshold levels. This new method enables manufacturers of cellular materials not only to determine the oxidative stability of their products but also to optimize them specifically for higher durability. ENVIRONMENTAL IMPLICATION: Cellular materials are ubiquitous in the technosphere. They play a crucial role in various microenvironments such as automotive interiors, building insulation, and cushioning. These materials are susceptible to oxidative breakdown, leading to the release of formaldehyde, acetaldehyde, and acrolein. The ecotoxicological profiles of these compounds necessitate monitoring and regulation. The absence of reproducible and reliable analytical methods restricts research and development aimed at risk assessment and mitigation. This work significantly enhances the toolbox for optimizing the oxidative stability of any open-cell cellular material and evaluating these materials in terms of their temperature-dependent oxidation and emission behavior.

Aerobic mechanochemical reversible-deactivation radical polymerization

Polymer materials suffer mechano-oxidative deterioration or degradation in the presence of molecular oxygen and mechanical forces. In contrast, aerobic biological activities combined with mechanical stimulus promote tissue regeneration and repair in various organs. A synthetic approach in which molecular oxygen and mechanical energy synergistically initiate polymerization will afford similar robustness in polymeric materials. Herein, aerobic mechanochemical reversible-deactivation radical polymerization was developed by the design of an organic mechano-labile initiator which converts oxygen into activators in response to ball milling, enabling the reaction to proceed in the air with low-energy input, operative simplicity, and the avoidance of potentially harmful organic solvents. In addition, this approach not only complements the existing methods to access well-defined polymers but also has been successfully employed for the controlled polymerization of (meth)acrylates, styrenic monomers and solid acrylamides as well as the synthesis of polymer/perovskite hybrids without solvent at room temperature which are inaccessible by other means.

Mild Catalytic Degradation of Crystalline Polyethylene Units in a Solid State Assisted by Carboxylic Acid Groups

Crystalline polyethylenes bearing carboxylic acid groups in the main chain were successfully degraded with a Ce catalyst and visible light. The reaction proceeds in a crystalline solid state without swelling in acetonitrile or water at a reaction temperature as low as 60 or 80 °C, employing dioxygen in air as the only stoichiometric reactant with nearly quantitative recovery of carbon atoms. Heterogeneous features of the reaction allowed us to reveal a dynamic morphological change of polymer crystals during the degradation.

Recent advances in oxidative degradation of plastics

Oxidative degradation is a powerful method to degrade plastics into oligomers and small oxidized products. While thermal energy has been conventionally employed as an external stimulus, recent advances in photochemistry have enabled photocatalytic oxidative degradation of polymers under mild conditions. This tutorial review presents an overview of oxidative degradation, from its earliest examples to emerging strategies. This review briefly discusses the motivation and the development of thermal oxidative degradation of polymers with a focus on underlying mechanisms. Then, we will examine modern studies primarily relevant to catalytic thermal oxidative degradation and photocatalytic oxidative degradation. Lastly, we highlight some unique studies using unconventional approaches for oxidative polymer degradation, such as electrochemistry.

Charged polystyrene microplastics inhibit uptake and transformation of 14C-triclosan in hydroponics-cabbage system

INTRODUCTION

Since the outbreak of COVID-19, microplastics (MPs) and triclosan in pharmaceuticals and personal care products (PPCPs) are markedly rising. MPs and triclosan are co-present in the environment, but their interactions and subsequent implications on the fate of triclosan in plants are not well understood.

OBJECTIVE

This study aimed to investigate effects of charged polystyrene microplastics (PS-MPs) on the fate of triclosan in cabbage plants under a hydroponic system.

METHODS

14C-labeling method and liquid chromatography coupled with quadrupole/time-of-flight mass spectrometry (LC-QTOF-MS) analysis were applied to clarify the bioaccumulation, distribution, and metabolism of triclosan in hydroponics-cabbage system. The distribution of differentially charged PS-MPs in cabbage was investigated by confocal laser scanning microscopy and scanning electron microscopy.

RESULTS

The results showed that MPs had a significant impact on bioaccumulation and metabolism of triclosan in hydroponics-cabbage system. PS-COO-, PS, and PS-NH3+ MPs decreased the bioaccumulation of triclosan in cabbage by 69.1 %, 81.5 %, and 87.7 %, respectively, in comparison with the non-MP treatment (control). PS-MPs also reduced the translocation of triclosan from the roots to the shoots in cabbage, with a reduction rate of 15.6 %, 28.3 %, and 65.8 % for PS-COO-, PS, and PS-NH3+, respectively. In addition, PS-NH3+ profoundly inhibited the triclosan metabolism pathways such as sulfonation, nitration, and nitrosation in the hydroponics-cabbage system. The above findings might be linked to strong adsorption between PS-NH3+ and triclosan, and PS-NH3+ may also potentially inhibit the growth of cabbage. Specially, the amount of triclosan adsorbed on PS-NH3+ was significantly greater than that on PS and PS-COO-. The cabbage biomass was reduced by 76.9 % in PS-NH3+ groups, in comparison with the control.

CONCLUSION

The uptake and transformation of triclosan in hydroponics-cabbage system were significantly inhibited by charged PS-MPs, especially PS-NH3+. This provides new insights into the fate of triclosan and other PPCPs coexisted with microplastics for potential risk assessments.

The environmental effects of microplastics and microplastic derived dissolved organic matter in aquatic environments: A review

Currently, microplastics (MPs) have ubiquitously distributed in different aquatic environments. Due to the unique physicochemical properties, MPs exhibit a variety of environmental effects with the coexisted contaminants. MPs can not only alter the migration of contaminants via vector effect, but also affect the transformation process and fate of contaminants via environmental persistent free radicals (EPFRs). The aging processes may enhance the interaction between MPs and co-existed contaminants. Thus, it is of great significance to review the aging mechanism of MPs and the influence of coexisted substances, the formation mechanism of EPFRs, environmental effects of MPs and relevant mechanism. Moreover, microplastic-derived dissolved organic matter (MP-DOM) may also influence the elemental biogeochemical cycles and the relevant environmental processes. However, the environmental implications of MP-DOM are rarely outlined. Finally, the knowledge gaps on environmental effects of MPs were proposed.

Natural iron-containing minerals catalyze the degradation of polypropylene microplastics: a route to self-remediation learnt from the environment

Virgin and environmentally aged polypropylene (PP) micropowders (V-PP and E-PP, respectively) were used as reference microplastics (MPs) in comparative photo- and thermo-oxidative ageing experiments performed on their mixtures with a natural ferrous sand (NS) and with a metal-free silica sand (QS). The ferrous NS was found to catalyze the photo-oxidative degradation of V-PP after both UV and simulated solar light irradiation. The catalytic activity in the V-PP/NS mixture was highlighted by the comparatively higher fraction of photo-oxidized PP extracted in dichloromethane, and the higher carbonyl index of the bulk polymer extracted with boiling xylene, when compared with the V-PP/QS mixture. Similarly, NS showed a catalytic effect on the thermal degradation (at T = 60 °C) of E-PP. The results obtained indicate that, under suitable environmental conditions (in this case, an iron-containing sediment or soil matrix, combined with simulated solar irradiation), the degradation of some types of MPs could be much faster than anticipated. Given the widespread presence of iron minerals (including the magnetite and iron-rich serpentine found in NS) in both coastal and mainland soils and sediments, a higher than expected resilience of the environment to the contamination by this class of pollutants is anticipated, and possible routes to remediation of polluted natural environments by eco-compatible iron-based minerals are envisaged.

A radical polymer membrane for simultaneous degradation of organic pollutants and water filtration

Integrating reactive radicals into membranes that resemble biological membranes has always been a pursuit for simultaneous organics degradation and water filtration. In this research, we discovered that a radical polymer (RP) that can directly trigger the oxidative degradation of sulfamethozaxole (SMX). Mechanistic studies by experiment and density functional theory simulations revealed that peroxyl radicals are the reactive species, and the radicals could be regenerated in the presence of O2. Furthermore, an interpenetrating RP network membrane consisting of polyvinyl alcohol and the RP was fabricated to demonstrate the simultaneous filtration of large molecules in the model wastewater stream and the degradation of ~ 85% of SMX with a steady permeation flux. This study offers valuable insights into the mechanism of RP-triggered advanced oxidation processes and provides an energy-efficient solution for the degradation of organic compounds and water filtration in wastewater treatment.

Macromolecular Photoediting Using Single-Electron Logic

Accessing the chemistry of reactive intermediates under mild conditions has significantly expanded the available chemical space for molecular transformations. Nowhere is this more apparent than in the context of photoredox catalysis. Despite abundant literature precedents for using this powerful methodology to build complex targets, there are comparatively few reports that leverage photoredox catalysis for macromolecular editing. Here, we report a mild photoredox approach that enables both the functionalization and degradation of polyalkenamers to valuable feedstocks. Irradiation with visible light (including natural sunlight) in the presence of a pyrillium photoredox catalyst promoted facile chain scission in a variety of substrates. This metal-free approach transformed high molar mass materials (>300 kDa) to low molar mass species (<15 kDa) within 10 min. Moreover, we could completely degrade macromolecules into a range of useful targets (C16-C29 species) within 96 h. Mechanistic and kinetic experiments were carried out to understand this reactivity, which could be coupled with hydrofunctionalizations to create tailored products.

Designing biodegradable alternatives to commodity polymers

The development and widespread adoption of commodity polymers changed societal landscapes on a global scale. Without the everyday materials used in packaging, textiles, construction and medicine, our lives would be unrecognisable. Through decades of use, however, the environmental impact of waste plastics has become grimly apparent, leading to sustained pressure from environmentalists, consumers and scientists to deliver replacement materials. The need to reduce the environmental impact of commodity polymers is beyond question, yet the reality of replacing these ubiquitous materials with sustainable alternatives is complex. In this tutorial review, we will explore the concepts of sustainable design and biodegradability, as applied to the design of synthetic polymers intended for use at scale. We will provide an overview of the potential biodegradation pathways available to polymers in different environments, and highlight the importance of considering these pathways when designing new materials. We will identify gaps in our collective understanding of the production, use and fate of biodegradable polymers: from identifying appropriate feedstock materials, to considering changes needed to production and recycling practices, and to improving our understanding of the environmental fate of the materials we produce. We will discuss the current standard methods for the determination of biodegradability, where lengthy experimental timescales often frustrate the development of new materials, and highlight the need to develop better tools and models to assess the degradation rate of polymers in different environments.

Degradable and Recyclable Polyesters from Multiple Chain Length Bio- and Waste-Sourceable Monomers

Monomers sourced from waste or biomass are often mixtures of different chain lengths; e.g. catalytic oxidation of polyethylene waste yields mixtures of dicarboxylic acids (DCAs). Yet, polyesters synthesized from such monomer mixtures have rarely been studied. We report polyesters based on multiple linear aliphatic DCAs, present in chain length distributions that vary in their centers and ranges. We demonstrate that these materials can adopt high-density polyethylene-like solid state structures, and are ductile (e.g. Et 610 MPa), allowing for injection molding, or film and fiber extrusion. Melting and crystallization points of the polyesters show no odd-even effects as dipoles cannot favorably align in the crystal, similar to traditional odd carbon numbered, long-chain DCA polyesters. Biodegradation studies of 13 C-labelled polyesters in soil reveal rapid mineralization, and depolymerization by methanolysis indicates suitability for closed-loop recycling.

Contributions of CO2, O2, and H2O to the Oxidative Stability of Solid Amine Direct Air Capture Sorbents at Intermediate Temperature

Aminopolymer-based sorbents are preferred materials for extraction of CO2 from ambient air [direct air capture (DAC) of CO2] owing to their high CO2 adsorption capacity and selectivity at ultra-dilute conditions. While those adsorptive properties are important, the stability of a sorbent is a key element in developing high-performing, cost-effective, and long-lasting sorbents that can be deployed at scale. Along with process upsets, environmental components such as CO2, O2, and H2O may contribute to long-term sorbent instability. As such, unraveling the complex effects of such atmospheric components on the sorbent lifetime as they appear in the environment is a critical step to understanding sorbent deactivation mechanisms and designing more effective sorbents and processes. Here, a poly(ethylenimine) (PEI)/Al2O3 sorbent is assessed over continuous and cyclic dry and humid conditions to determine the effect of the copresence of CO2 and O2 on stability at an intermediate temperature of 70 °C. Thermogravimetric and elemental analyses in combination with in situ horizontal attenuated total reflection infrared (HATR-IR) spectroscopy are performed to measure the extent of deactivation, elemental content, and molecular level changes in the sorbent due to deactivation. The thermal/thermogravimetric analysis results reveal that incorporating CO2 with O2 accelerates sorbent deactivation using these sorbents in dry and humid conditions compared to that using CO2-free air in similar conditions. The in situ HATR-IR spectroscopy results of PEI/Al2O3 sorbent deactivation under a CO2-air environment show the formation of primary amine species in higher quantity (compared to that in conditions without O2 or CO2), which arises due to the C-N bond cleavage at secondary amines due to oxidative degradation. We hypothesize that the formation of bound CO2 species such as carbamic acids catalyzes C-N cleavage reactions in the oxidative degradation pathway by shuttling protons, resulting in a low activation energy barrier for degradation, as probed by metadynamics simulations. In the cyclic experiment after 30 cycles, results show a gradual loss in stability (dry: 29%, humid: 52%) under CO2-containing air (0.04% CO2/21% O2 balance N2). However, the loss in capacity during cyclic studies is significantly less than that during continuous deactivation, as expected.

Hazardous state lifetimes of biodegradable plastics in natural environments

Plastic pollution is a critical problem that has the potential for long-lasting impact. While all plastics eventually break down to at least some degree, they can remain in different transition states, such as microplastics and nanoplastics, for extended periods of time before reaching complete mineralisation to non-hazardous end products. Each of the transition states represents different types of hazards, so it is critical to understand the factors driving the lifetimes of plastics within these states. To do this, we propose a framework for assessing plastic lifetimes in natural environments based on the flow of material through potentially hazardous states: macroplastic and mesoplastic, microplastic, nanoplastic and soluble products. State changes within this framework are underpinned by three key processes: fragmentation, depolymerisation, and bioassimilation, with the pathways for generation of the different plastic states, and the lifetimes within these states, varying widely for individual materials in different environments due to their dependence on polymer material type, form and properties, and environmental factors. The critical factors driving these processes can therefore appear complex, but molecular weight, crystallinity, oxygen and water diffusivity, and inherent polymer chain reactivity (including to enzymes) are key to our understanding. By analysing currently available data that take factors such as these into consideration, we have generated information on the most likely states in which a range of plastics with different environmental degradation behaviour may exist over time in natural environments. Polyethylene (PE), for example, should be expected to fragment and accumulate in the environment as microplastic and nanoplastic. Interestingly, the state-profile for the biodegradable plastic polylactic acid (PLA) is similar, albeit over shorter timeframes. PLA also likely fragments, but then the relatively slow process of abiotic depolymerisation results in accumulation of microplastic and nanoplastic. By contrast, the state-profile for the biodegradable plastic polyhydroxyalkanoate (PHA) would be expected to be very different. The bulk material is less susceptible to embrittlement and fragmentation as a primary path to biodegradation, since the rapid enzyme catalysed depolymerisation of exposed surfaces proceeds in conjunction with bioassimilation.

Probing the Effect of Linear and Crosslinked POE-g-GMA on the Properties of Asphalt

The copolymer ethylene-octene (POE) has good aging resistance and is an inexpensive asphalt additive compared to the styrene-butadiene-styrene copolymer (SBS). However, POE is easy to segregate in asphalt during storage at high temperatures. Grafting glycidyl methacrylate (GMA) onto the molecular backbone of POE (i.e., POE-g-GMA) may solve this problem, for the epoxy groups in GMA can react with the active groups in asphalt. Asphalt modified with linear and crosslinked POE-g-GMA were prepared, and the hot storage stability, physical properties and thermal oxidation aging properties were discussed in detail. The results show that linear and low-degree crosslinked POE-g-GMA-modified asphalts are storage-stable at high temperatures via measurements of the difference in softening points and small-angle X-ray scattering (SAXS) characterizations from macro and micro perspectives. The difference in softening points (ΔSP) between the upper and lower ends is no more than 3.5 °C for modified asphalts after 48 h of being in an oven at 163 °C. More importantly, the crosslinking modification of POE-g-GMA can further increase the softening point and reduce the penetration as well as rheological properties via conventional physical property, dynamic shear rheometer (DSR) and multiple-stress creep recovery (MSCR) tests. Furthermore, asphalt modified with crosslinked POE-g-GMA reveals better aging resistance via measurements of the performance retention rate and electron paramagnetic resonance (EPR) characterizations after a rolling thin film oven test (RTFOT). This work may provide further guidelines for the application of polymers in asphalt.

Fate and environmental behaviors of microplastics through the lens of free radical

Microplastics (MPs), as plastics with a size of less than 5 mm, are ubiquitously present in the environment and become an increasing environmental concern. The fate and environmental behavior of MPs are significantly influenced by the presence of free radicals. Free radicals can cause surface breakage, chemical release, change in crystallinity and hydrophilicity, and aggregation of MPs. On the other hand, the generation of free radicals with a high concentration and oxidation potential can effectively degrade MPs. There is a limited review article to bridge the fate and environmental behaviors of MP with free radicals and their reactions. This paper reviews the sources, types, detection methods, generation mechanisms, and influencing factors of free radicals affecting the environmental processes of MPs, the environmental effects of MPs controlled by free radicals, and the degradation strategies of MPs based on free radical-associated technologies. Moreover, this review elaborates on the limitations of the current research and provides ideas for future research on the interactions between MPs and free radicals to better explain their environmental impacts and control their risks. This article aims to keep the reader abreast of the latest development in the fate and environmental behaviors of MP with free radicals and their reactions and to bridge free radical chemistry with MP control methodology.

Unexpectedly Efficient Aging of Organic Aerosols Mediated by Autoxidation

Multiphase oxidative aging is a ubiquitous process for atmospheric organic aerosols (OA). But its kinetics was often found to be slow in previous laboratory studies where high hydroxyl radical concentrations ([^•OH]) were used. In this study, we performed heterogeneous oxidation experiments of several model OA systems under varied aging timescales and gas-phase [^•OH]. Our results suggest that OA heterogeneous oxidation may be 2-3 orders of magnitude faster when [^•OH] is decreased from typical laboratory flow tube conditions to atmospheric levels. Direct laboratory mass spectrometry measurements coupled with kinetic simulations suggest that an intermolecular autoxidation mechanism mediated by particle-phase peroxy radicals greatly accelerates OA oxidation, with enhanced formation of organic hydroperoxides, alcohols, and fragmentation products. With autoxidation, we estimate that the OA oxidation timescale in the atmosphere may be from less than a day to several days. Thus, OA oxidative aging can have greater atmospheric impacts than previously expected. Furthermore, our findings reveal the nature of heterogeneous aerosol oxidation chemistry in the atmosphere and help improve the understanding and prediction of atmospheric OA aging and composition evolution.

Probing the Kinetic Origin of Varying Oxidative Stability of Ethyl- vs. Propyl-spaced Amines for Direct Air Capture

Amine-based adsorbents are promising for direct air capture of CO₂ , yet oxidative degradation remains a key unmitigated risk hindering wide-scale deployment. Borrowing wisdom from the basic auto-oxidation scheme, insights are gained into the underlying degradation mechanisms of polyamines by quantum chemical, advanced sampling simulations, adsorbent synthesis, and accelerated degradation experiments. The reaction kinetics of polyamines are contrasted with that of typical aliphatic polymers and they elucidate for the first time the critical role of aminoalkyl hydroperoxide decomposition in the oxidative degradation of amino-oligomers. The experimentally observed variation in oxidative stability of polyamines with different backbone structures is explained by the relationship between the local chemical structure and the free energy barrier of aminoalkyl hydroperoxide decomposition, suggesting that its energetics can be used as a descriptor to screen and design new polyamines with improved stability. The developed computational capability sheds light on radical-induced degradation chemistry of other organic functional materials.

Stabilization Activity of Kelp Extract in Ethylene-Propylene Rubber as Safe Packaging Material

This paper presents the stabilization effects of the solid extract of kelp (Ascophyllum nodosum) on an engineering elastomer, ethylene-propylene copolymer (EPR), which may be used as packaging material. Progressive increase in additive loadings (0.5, 1, and 2 phr) increases the oxidation induction time for thermally aged rubber at 190 °C from 10 min to 30 min for pristine material and modified polymer by adding 2 phr protection powder. When the studied polymer is γ-irradiated at 50 and 100 kGy, the onset oxidation temperatures increase as a result of blocking the oxidation reactivity of free radicals. The stabilization effect occurs through the activity of alginic acid, which is one of the main active components associated with alginates. The accelerated degradation caused by γ-exposure advances more slowly when the kelp extract is present. The OOT value for the oxidation of EPR samples increases from 130 °C to 165 °C after the γ-irradiation of pristine and modified (2 phr of kelp powder) EPR, respectively. The altered oxidation state of EPR samples by the action of γ-rays in saline serum is faster in neat polymer than in stabilized material. When the probes are placed in physiological serum and irradiated at 25 kGy, the OOT value for neat EPR (145 °C) is much lower than the homologous value for the polymer samples protected by kelp extract (153 °C for the concentration of 0.5 phr, 166 °C for the concentration of 1 phr, and 185 °C for the concentration of 2 phr).

Spin Trapping Analysis of Radical Intermediates on the Thermo-Oxidative Degradation of Polypropylene

The purpose of this study is to investigate the thermo-oxidative degradation behavior of polypropylene (PP) by comparing three types of pristine PP granules (consisting of homopolymer, random copolymer, and block copolymer) with their corresponding oxidized analogues. These analogues were intensely oxidized under oxygen at 90 °C for 1000 h by using the electron spin resonance (ESR) spin trapping method that can detect short-lived radical intermediates during the degradation. The degrees of oxidation could be evaluated by chemiluminescence (CL) intensity, which was related to the concentration of hydroperoxide groups generated in the PP chain. In the pristine PP samples, a small amount of hydroperoxides were found to be formed unintentionally, and their homolysis produces alkoxy radicals, RO•, which then undergo β-scission to yield chain-end aldehydes or chain-end ketones. These oxidation products continue to take part in homolysis to produce their respective carbonyl and carbon radicals. On the other hand, in the oxidized PP granules, because of their much higher hydroperoxide concentration, the two-stage cage reaction and the bimolecular decomposition of hydroperoxides are energetically favorable. Carbonyl compounds are formed in both reactions, which are then homolyzed to form the carbonyl radical species, •C(O)-. PP homopolymer produced the largest amount of carbonyl radical spin adduct; thus, it was found that the homopolymer is most sensitive to oxygen attack, and the presence of ethylene units in copolymers enhances the oxidation resistance of PP copolymers.

The photochemical behaviors of microplastics through the lens of reactive oxygen species: Photolysis mechanisms and enhancing photo-transformation of pollutants

The photoaging mechanisms of various polymers have been explored based on the basic autoxidation scheme (BAS) before 10 years ago, however current research verified some defects in the BAS in both thermodynamic and dynamics. These defects are troublesome because they are associated with the hydrogen abstraction which is central to continuously perform the photooxidation process of microplastics. These found indicated that we might wrongly inferred photo-oxidation process of some microplastics. In addition, the important role of reactive oxygen species (ROS) in the type-dependent photoaging process of various microplastics has been revealed recently. In this case, fully and accurately understanding the photoaging mechanisms of different microplastics in environment is a priority to further manage the ecological risk of microplastics. Herein, this review aims to revise and update the degradation process of microplastics based on the revised BAS and in the perspective of ROS. Specifically, the modification of BAS is firstly discussed. The photoaging mechanisms of representative microplastics (i.e., polyethylene, polystyrene and polyethylene terephthalate) are then updated based on the corrected BAS. Additionally, the role of ROS in their photolysis process and the possibility of microplastics as photosensitizers/mediators to regulate the fate of co-existent pollutants are also analyzed. Finally, several perspectives are then proposed to guide future research on the photoaging behaviors of microplastics. This review would pave the way for the understanding of microplastic photoaging and the management of plastic pollution in environments.

Multiscale modelling of the radical-induced chemistry of acetohydroxamic acid in aqueous solution

Acetohydroxamic acid (AHA) is a small organic acid with a wide variety of industrial, biological, and pharmacological applications. A deep fundamental molecular level understanding of the mechanisms responsible for the radical-induced reactions of AHA in these environments is necessary to predict and control their behaviour and elucidate their interplay with other attendant chemical species, for example, the oxidative degradation products of AHA. To this end, we present a comprehensive, multiscale computer model for interrogating the radical-induced degradation of AHA in acidic aqueous solutions. Model predictions were critically evaluated by a systematic experimental radiation chemistry investigation, leveraging time-resolved electron pulse irradiation techniques for the measurement of new radical reaction rate coefficients, and steady-state gamma irradiations for the identification and quantification of AHA degradation products: acetic acid, hydroxylamine, nitrous oxide, and molecular hydrogen, with formic acid and methane as minor products. Excellent agreement was achieved between calculation and experiment, indicating that this fundamental model can accurately predict the degradation pathways of AHA under irradiation in acidic aqueous solutions.

Radical Composition and Radical Reaction Kinetics in the Probe-Irradiated XLPE Samples as a Potential Source of Information on Their Aging Degree

Polyethylene is a model polyolefin, and a widely used material for the manufacture of many products, including cable sheaths. Understanding degradation mechanisms at the atomic scale leading to oxidation during aging is crucial for many long-term applications. The concentrations of radicals derived from oxidation and chain scission during radio-oxidation, as well as their ratio, are important parameters controlling the predominance of chain scission or crosslinking of the polymer. In this work, we propose a cryogenic EPR technique for measuring oxidation- and fragmentation-derived radicals as a less-destructive method for the evaluation of cable insulation aging and performance capability. We investigate the effect of the low-dose and high-dose radiation aging on the formation of free radicals in the polymer matrix that are both unprotected and protected by antioxidants. The stability of radicals after aging is a determinant of macroscopic processes and structural changes during aging. Under the conditions of the higher dose rate, the peroxy radical buildup is lower per dose. Peroxy radical buildup is followed by decay during aging, in accordance with POOH content. Our results allow the prediction of the capability of the antioxidant to protect the XLPE material in the function of dose and time.

Polyolefin Innovations toward Circularity and Sustainable Alternatives

The unprecedented growth and socioeconomic impacts of polyolefins clearly outline a major success story in the world of polymer science. Polyolefins revolutionizes industries such as health care, construction, and food packaging. Despite the benefits of polyolefins, there is a rising concern for the environment due to high production volume (i.e., fossil fuel consumption), often short usage time, and problems related to waste management and accumulation in the natural environment. Creating a circular economy for polyolefins through effective recycling technologies has the potential to decrease the environmental impact of these materials. This perspective discusses polyolefins and their impact, existing and emerging recycling/upcycling solutions, and recycle-by-design alternatives that are challenging the status quo.

ROS-mediated photoaging pathways of nano- and micro-plastic particles under UV irradiation

Reactive oxygen species (ROS) generation is considered as an important photoaging mechanism of microplastics (MPs) and nanoplastics (NPs). To elucidate the ROS-induced MP/NP aging processes in water under UV₃₆₅ irradiation, we examined the effects of surface coatings, polymer types and grain sizes on ROS generation and photoaging intermediates. Bare polystyrene (PS) NPs generated hydroxyl radicals (•OH) and singlet oxygen (¹O₂), while coated PS NPs (carboxyl-modified PS (PS-COOH), amino-modified PS (PS-NH₂)) and PS MPs generated fewer ROS due to coating scavenging or size effects. Polypropylene, polyethylene, polyvinyl chloride, polyethylene terephthalate and polycarbonate MPs only generated •OH. For aromatic polymers, •OH addition preferentially occurred at benzene rings to form monohydroxy polymers. Excess •OH resulted in H abstraction, CC scission and phenyl ring opening to generate aliphatic ketones, esters, aldehydes, and aromatic ketones. For coated PS NPs, •OH preferentially attacked the surface coatings to result in decarboxylation and deamination reactions. For aliphatic polymers, •OH attack resulted in the formation of carbonyl groups from peracid, aldehyde or ketone via H abstraction and CC scission. Moreover, ¹O₂ might participate in phenyl ring opening for PS NPs and coating degradation for coated PS NPs. This study facilitates understanding the ROS-induced weathering process of NPs/MPs in water under UV irradiation.

Suppressing Oxygen-Induced Deterioration of Metal Halide Perovskites by Alkaline Earth Metal Doping: A Quantum Dynamics Study

Exposure to oxygen undermines stability and charge transport in metal halide perovskites, because molecular oxygen, as well as photogenerated superoxide and peroxide, erodes the perovskite lattice and creates charge traps. We demonstrate that alkaline earth metals passivate the oxygen species in CH₃NH₃PbI₃ by breaking the O-O bond and forming new bonds with the oxygen atoms, shifting the trap states of the antibonding O-O orbitals from inside the bandgap into the bands. In addition to eliminating the oxidizing species and the charge traps, doping with the alkaline earth metals slightly increases the bandgap and partially localizes the electron and hole wavefunctions, weakening the electron-hole and charge-phonon interactions and making the charge carrier lifetimes longer than even those in pristine CH₃NH₃PbI₃. Relative to CH₃NH₃PbI₃ exposed to oxygen and light, the charge carrier lifetime of the passivated CH₃NH₃PbI₃ increases by 2-3 orders of magnitude. The ab initio quantum dynamics simulations demonstrate that alkaline earth metals passivate efficiently not only intrinsic perovskite defects, but also the foreign species, providing a viable strategy to suppress perovskite degradation.

New mechanism for autoxidation of polyolefins: kinetic Monte Carlo modelling of the role of short-chain branches, molecular oxygen and unsaturated moieties

Using quantum-chemical calculations and kinetic modelling, we reveal the dominant reaction pathway in polymer autoxidation, (i) whether oxygen promotes or hamper degradation and (ii) how defects in the polymer backbone affect degradation.

Effect of light irradiation on heavy metal adsorption onto microplastics

Microplastics are frequently found in many environmental media. Polypropylene (PP) is one of the plastics commonly used, resulting in more and more PP fragments in natural waters. Contaminants, such as lead (Pb), could get adsorbed onto microplastics after the exposure to sunlight, and pose a larger threat to aquatic species. In this study, the oxidative indices of PP pellets after different exposure times to a Xenon lamp were evaluated by Fourier transform infrared (FTIR) and energy-dispersive X-ray spectrometry. The results show that the percentage of oxygen content increased from 2.80 to 20.95 wt% and changes of characteristic peaks of the FTIR pattern, implying that the exposure to the Xenon lamp could initiate oxidation. Due to the changes of functional groups after the exposure to the Xenon lamp for 28 days, the adsorption capacities of the PP pellets were up to 274.4 mg⋅kg^-1, 1.7 to 2.5 times higher than that of the raw PP pellets depending on the solution pHs. The adsorption behavior can be described by a pseudo-second-order model with rate constants of adsorption of 0.00212-0.01404 kg⋅mg^-1⋅h^-1. The increase of adsorption capacity due to changes of the PP pellets after the Xenon lamp exposure increased the potential risk to the aquatic species.

The molecular mechanisms of ferroptosis and its role in cardiovascular disease

Ferroptosis is a programmed iron-dependent cell death characterized by accumulation of lipid peroxides (LOOH) and redox disequilibrium. Ferroptosis shows unique characteristics in biology, chemistry, and gene levels, compared to other cell death forms. The metabolic disorder of intracellular LOOH catalyzed by iron causes the inactivity of GPX4, disrupts the redox balance, and triggers cell death. Metabolism of amino acid, iron, and lipid, including associated pathways, is considered as a specific hallmark of ferroptosis. Epidemiological studies and animal experiments have shown that ferroptosis plays an important character in the pathophysiology of cardiovascular disease such as atherosclerosis, myocardial infarction (MI), ischemia/reperfusion (I/R), heart failure (HF), cardiac hypertrophy, cardiomyopathy, and abdominal aortic aneurysm (AAA). This review systematically summarized the latest research progress on the mechanisms of ferroptosis. Then we report the contribution of ferroptosis in cardiovascular diseases. Finally, we discuss and analyze the therapeutic approaches targeting for ferroptosis associated with cardiovascular diseases.

Generation of nanoplastics during the photoageing of low-density polyethylene

In this work, we studied the hydrolytic and photochemical degradation of three low-density polyethylene (LDPE) materials, within the size range of microplastics (MP). The MPs were exposed to mechanical agitation and UV irradiation equivalent to one year of solar UVB + UVA in a stirred photoreactor. Flow cytometry was used to track the formation of small (1-25 μm) MPs by applying Mie's theory to derive the size of MP particles from scattering intensity readings. The calculation was based on a calibration with polystyrene (PS) beads. The results showed that the generation of 1-5 μm MP reached 10⁴-10⁵ MPs in the 1-25 μm range per gram of LDPE. ATR-FTIR and micro-FTIR measurements evidenced the formation of oxygenated moieties, namely hydroxyl, carbonyl, and carbon-oxygen bonds, which increased with irradiation time. We also found evidence of the production of a high number of nanoplastics (<1 μm, NPs). The Dynamic Light Scattering size of secondary NPs was in the hundreds of nm range and might represent up to 10¹⁰ NPs per gram of LDPE. Our results allowed the unambiguous spectroscopic assessment of the generation of NPs from LDPE under conditions simulating environmental exposure to UV irradiation and used flow cytometry for the first-time to track the formation of secondary MPs.

Alkoxy Radicals See the Light: New Paradigms of Photochemical Synthesis

Alkoxy radicals are highly reactive species that have long been recognized as versatile intermediates in organic synthesis. However, their development has long been impeded due to a lack of convenient methods for their generation. Thanks to advances in photoredox catalysis, enabling facile access to alkoxy radicals from bench-stable precursors and free alcohols under mild conditions, research interest in this field has been renewed. This review comprehensively summarizes the recent progress in alkoxy radical-mediated transformations under visible light irradiation. Elementary steps for alkoxy radical generation from either radical precursors or free alcohols are central to reaction development; thus, each section is categorized and discussed accordingly. Throughout this review, we have focused on the different mechanisms of alkoxy radical generation as well as their impact on synthetic utilizations. Notably, the catalytic generation of alkoxy radicals from abundant alcohols is still in the early stage, providing intriguing opportunities to exploit alkoxy radicals for diverse synthetic paradigms.

Connecting Gas-Phase Computational Chemistry to Condensed Phase Kinetic Modeling: The State-of-the-Art

In recent decades, quantum chemical calculations (QCC) have increased in accuracy, not only providing the ranking of chemical reactivities and energy barriers (e.g., for optimal selectivities) but also delivering more reliable equilibrium and (intrinsic/chemical) rate coefficients. This increased reliability of kinetic parameters is relevant to support the predictive character of kinetic modeling studies that are addressing actual concentration changes during chemical processes, taking into account competitive reactions and mixing heterogeneities. In the present contribution, guidelines are formulated on how to bridge the fields of computational chemistry and chemical kinetics. It is explained how condensed phase systems can be described based on conventional gas phase computational chemistry calculations. Case studies are included on polymerization kinetics, considering free and controlled radical polymerization, ionic polymerization, and polymer degradation. It is also illustrated how QCC can be directly linked to material properties.

Gamma Radiation Chemistry of Polydimethylsiloxane Foam in Radiation-Thermal Environments: Experiments and Simulations

The γ radiolysis behavior of polydimethylsiloxane (PDMS) in the radiation-thermal environments (dose rate, 0.2 Gy/s) is studied to pinpoint the basic knowledge of the temperature (20-70 °C) effects. The non-monotonous temperature effects on the formation of gas products, paramagnetic species in silica, and cross-linking density are proposed to correlate with the complex chemical reaction mechanisms. Besides, molecular dynamics simulation and theoretical calculation are first performed simultaneously based on the radical chemistry and intricate material composition, making it easier to comprehend and further harness the radiolysis mechanisms and structure deterioration of PDMS. The γ radiation-induced primary gas products and dominant cross-linking phenomena are reproduced by the molecular dynamics simulations with a reactive force field, and the reaction mechanisms and physicochemical interactions among PDMS chains, gas products, reactive radicals, and silica fillers are thoroughly studied at the atomic scale. The thermochemistry of the barrierless radical coupling reactions and reactions with explicit high-barrier transition states is calculated at the M06-2X theoretical level with the 6-311g(d, p) basis set. The barrierless reactions are all exothermal with the heat release of 321-618 kJ/mol, while the potential barriers for reactions with explicit transition states vary between 37 and 229 kJ/mol. The results show that γ radiation-induced radicals are crucial for the ensuing gas formation and cross-linking reactions, especially for the radical coupling reactions. The radical chemistry involved in the radiolytic PDMS is the key to understand and simulate its radiolysis behavior, according to the experimental and simulated results.

Hydrogen Atom Transfer from Benzyl Alcohols to N-Oxyl Radicals. Reactivity Parameters

A model for predicting the rate constants of hydrogen atom transfer (HAT) from the α-C-H bond of p-substituted benzyl alcohols to N-oxyl radicals was proposed. To quantify the factors governing the reactivity of both N-oxyl radicals and benzyl alcohols, multivariate regression analysis was performed using various combinations of reactivity parameters. The analysis was based on a 2D array of 35 HAT reactions, the rate constants of which span 4 orders of magnitude. The proposed polyparameter equation approximates the experimental rate constants of reactions with high accuracy using three independent parameters: Brown and Okamoto's substituent constants σ⁺ in alcohol molecules and the spin population on O and N atoms in the N-O^• fragment of N-oxyl radicals [calculated by DFT/B3LYP/6-31G(d,p)]. The rate constants of HAT reactions from p-substituted benzyl alcohols to a series of aryl-substituted phthalimide-N-oxyl radicals containing either electron-withdrawing or electron-donating substituents (4-Cl, 4-HOOC, 4-CH₃O), quinolinimide-N-oxyl, benzotriazole-N-oxyl, and violuric acid radicals were experimentally determined at 30 °C in acetonitrile.

The role of chlorine oxide radical (ClO•) in the degradation of polychoro-1,3-butadienes in UV/chlorine treatment: kinetics and mechanisms

Polychoro-1,3-butadienes (CBDs) were widely found in aqueous environment and resistant to conventional water treatment. In this study, the abatement of CBDs during UV/chlorine treatment was investigated. In comparison to UV irradiation alone, free chlorine addition brought benefits for the reduction of tetra-CBDs (TCBDs), but to lesser extent for penta-CBDs (PCBDs), and virtually no benefit for hexa-CBD (HCBD). At a UV dose of 128 mJ cm^-2 and a chlorine dose of 10 mg L^-1, about 71.7-97.8% CBDs were degraded by UV/chlorine treatment within 10 min. UV irradiation contributed 32.8%-97.6%, HO^• contributed 2.6%-14.4%, and reactive chlorine species (RCS) contributed less than 0.5%-42.3% to CBDs degradation. The percentages of RCS contribution generally followed the order of TCBDs (except (Z,Z)-1,2,3,4-TCBD) > PCBDs > HCBD. The chlorine oxide radical (ClO^•) was the dominant RCS contributing to the degradation of CBDs. The second-order reaction rate constants of ClO^• with CBDs ( [Formula: see text] ) were at ∼ 10⁷ M^-1s^-1 except (Z,Z)-1,2,3,4-TCBD and HCBD (<10⁶ M^-1s^-1). [Formula: see text] generally decreased with increasing numbers of chlorine atoms and was also affected by the positions of chlorine atoms in CBDs. A distinct reaction pathway of ClO^•, with (Z)-1,1,2,3,4-PCBD as a representative CBD, was proposed. Photoisomers of CBDs from Z or E configuration were observed at lower concentrations in UV/chlorine treatment than under UV irradiation alone due to the radical-involved oxidation, but more organic acids including oxalic acid were observed. In a natural water sample, UV/chlorine treatment also exhibited a good performance in abatement of TCBDs and PCBDs, but not in abatement of HCBD.

Performance of Manganese(III) Acetylacetonate in Solvent-Borne and High-Solid Alkyd Formulations

This paper reports a strong drying activity of manganese(III) acetylacetonate. It is documented on several solvent-borne and high-solid alkyd binders. Solubility problems, which often appear upon application of new primary driers, were overcome by use of dimethyl sulfoxide. Interestingly, intense coloration of the drier does not influence the transparent paint films due to in situ reduction to manganese(II) as evidenced by colorimetric measurements. Kinetics of the autoxidation process was investigated by infrared and Raman spectroscopy. For selected formulation, the effect of film thickness on through drying was estimated by infrared spectroscopy using attenuated total reflection sampling technique.

Polydopamine free radical scavengers

This feature article summarizes the recent progress, challenges and future directions of free radical scavengers based on polydopamine, including the integrated mechanism, current regulating strategies, and kinds of biomedical applications.

Bridging free radical chemistry with drug discovery: A promising way for finding novel drugs efficiently

Many diseases have been regarded to correlate with the in vivo oxidative damages, which are caused by overproduced free radicals from metabolic process or reactive oxygen species (ROS). This background motivates chemists to explore free radical reactions and to design a number of antioxidants, but whether free radical chemistry can be applied to accelerate the efficacy of the drug discovery is still underrepresented. Herein, in light of recent findings as well as kinetics on free radical reaction, the discipline of free radical chemistry is introduced to be a novel tool for finding potential drugs from antioxidant libraries accumulated during the study on free radical chemistry. These antioxidants provide with such abundant types of structural skeleton that might be employed to inhibit oxidations in different biological microenvironments. Although the in vitro characterization on the antioxidative property exerts a potential role of an antioxidant as a prodrug, the in vivo investigation on the property for quenching free radicals will make a final decision for the antioxidant whether it is worthy to be further explored pharmacologically. Therefore, it is reasonable to expect that bridging free radical chemistry with the pharmacological research will provide with a succinct way for finding novel drugs efficiently.

A Reaction-Induced Localization of Spin Density Enables Thermal C-H Bond Activation of Methane by Pristine FeC4. Chemistry 2019;25:12940-12945. [PMID: 31268193 PMCID: PMC6852486 DOI: 10.1002/chem.201902572]

The reactivity of the cationic metal-carbon cluster FeC₄ ⁺ towards methane has been studied experimentally using Fourier-transform ion cyclotron resonance mass spectrometry and computationally by high-level quantum chemical calculations. At room temperature, FeC₄ H⁺ is formed as the main ionic product, and the experimental findings are substantiated by labeling experiments. According to extensive quantum chemical calculations, the C-H bond activation step proceeds through a radical-based hydrogen-atom transfer (HAT) mechanism. This finding is quite unexpected because the initial spin density at the terminal carbon atom of FeC₄ ⁺ , which serves as the hydrogen acceptor site, is low. However, in the course of forming an encounter complex, an electron from the doubly occupied sp-orbital of the terminal carbon atom of FeC₄ ⁺ migrates to the singly occupied π*-orbital; the latter is delocalized over the entire carbon chain. Thus, a highly localized spin density is generated in situ at the terminal carbon atom. Consequently, homolytic C-H bond activation occurs without the obligation to pay a considerable energy penalty that is usually required for HAT involving closed-shell acceptor sites. The mechanistic insights provided by this combined experimental/computational study extend the understanding of methane activation by transition-metal carbides and add a new facet to the dizzying mechanistic landscape of hydrogen-atom transfer.