Self-Supply of H2O2 and O2 by Hydrolyzing CaO2 to Enhance the Electrochemiluminescence of Luminol Based on a Closed Bipolar Electrode

Portable hydrogel kit driven by bimetallic carbon dots nanozyme for H2O2-self-supplying dual-modal monitoring of atmospheric CH3SH

Due to the typical volatility of gaseous pollutant methyl mercaptan (CH3SH), the development of a facile, reliable, and accurate onsite environmental surveillance of highly toxic CH3SH faces many challenges, but it is critical to environmental atmosphere assessment and safeguarding public health. Here, we prepared a novel bimetallic carbon dots (Fe&Cu@CDs) nanozyme with high peroxidase-mimicking activity to design a portable hydrogel kit for onsite visual H2O2-self-supplying enzymatic cascade catalytic colorimetric and photothermal signal synergistic amplification dual-modal monitoring of CH3SH in atmospheric environment. Assisted by alcohol oxidase (AOX), CH3SH could be specifically converted into H2O2 for oxidizing chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB) catalyzed by Fe&Cu@CDs to produce dark blue ox-TMB with absorption at 652 nm and photothermal characters. Consequently, a CH3SH concentration-dependent change both in naked-eye color and photothermal effect-triggered temperature were observed. By hybridizing AOX-assisted Fe&Cu@CDs + TMB with agarose, a H2O2-self-supplying colorimetric and photothermal signal synergistic amplification sensory hydrogel kit integrated with Color Picker APP-installed smartphone and 660 nm laser-equipped handheld thermal imager for CH3SH was proposed with acceptable results in atmospheric environment around wastepile (e.g., solid waste and food waste piles), which exhibited great potentials to further develop commercial onsite monitoring platforms in warning-early abnormal atmospheric CH3SH for safeguarding environmental health.

Co3O4/NiCo2O4 heterojunction as oxygen evolution reaction catalyst for efficient luminol anode electrochemiluminescence

Luminol has garnered significant attention from analysts as one of the most effective and commonly used electrochemiluminescence (ECL) reagents. However, the efficient luminescence of luminol anode is limited by the excitation of various reactive oxygen species (ROS). Typically, ROS are generated through co-reactive reagents and dissolved oxygen. Unfortunately, the former suffers from two drawbacks, namely biotoxicity and instability, while the latter cannot offer sufficient oxygen due to its limited solubility in aqueous solutions. Consequently, a low decomposition rate is usually obtained, leading to insufficient ROS. Therefore, there is an urgent need to develop efficient luminol anode systems. This study focuses on the use of zeolitic imidazolate framework-67 (ZIF-67) as a template, employing a controlled chemical etching method to create a ZIF-67/Ni-Co-layered double hydroxide (LDH). The intermediate composite is then annealed in air, resulting in the formation of a Co3O4/NiCo2O4 double-shelled nanobox (DSNB) heterostructure. Due to its structural advantages, the DSNB exhibits excellent electrocatalytic performance in the oxygen evolution reaction (OER). Furthermore, it was found that both the intermediates and products of OER can directly participate in the luminol chemiluminescence process, ultimately resulting in a 700-fold increase in the electrochemiluminescence (ECL) signal compared to an equal molar concentration of luminol solution. This work not only establishes the OER-mediated ECL system but also deepens the understanding of the relationship between ROS and luminol, providing a new pathway to study the luminol anodic ECL luminescence system.

Exogenous Co-Reactant-Free Electrochemiluminescent Biosensor for Ratiometric Measurement of α-Glucosidase Based on a ZIF-67-Regulated Hydrogen-Bonded Organic Framework

The development of highly sensitive and selective analytical approaches for monitoring enzymatic activity is critical for disease diagnosis and biomedical research. Herein, we develop an exogenous co-reactant-free electrochemiluminescence (ECL) biosensor for the ratiometric measurement of α-glucosidase (α-Glu) based on a zeolitic imidazolate framework (ZIF-67)-regulated pyrene-based hydrogen-bonded organic framework (HOF-101). Target α-Glu can hydrolyze maltose to α-d-glucose, which can subsequently react with GOx to produce gluconic acid. The resultant gluconic acid can dissolve ZIF-67, leading to the recovery of the HOF-101 cathodic ECL signal and the decrease of the luminol anodic ECL signal. The long-range ordered structure of HOF-101 can speed up charge transfer, resulting in a stable and strong cathodic ECL signal. Moreover, ZIF-67 can not only efficiently quench the ECL signal of HOF-101 due to ECL resonance energy transfer between HOF-101 and ZIF-67 as well as the steric hindrance effect of ZIF-67 but also enhance the anodic ECL emission of luminol in dissolved O2 system because of its ordered and porous crystalline structure and the atomically dispersed Co2+. Notably, HOF-101 possesses a higher ECL efficiency (32.22%) compared with the Ru(bpy)32+ standard. Importantly, this ratiometric ECL biosensor shows high sensitivity (a detection limit of 0.19 U L-1) and a broad linear range (0.2-50 U L-1). This biosensor can efficiently eliminate systematic errors and enhance detection reliability without the involvement of exogenous co-reactants, and it displays good assay performance in human serum samples, holding great promise in biomedical research studies.

Construction of an ultrasensitive dual-mode chiral molecules sensing platform based on molecularly imprinted polymer modified bipolar electrode

Chiral molecules are abundant in nature. Phenylketonuria (PKU) is caused by the abnormal transformation of chiral molecules L-phenylalanine (L-Phe) in the human blood, which can cause irreversible harm to the human body. In this work, we documented an electrochemiluminescent (ECL) dual-mode sensor platform based on molecularly imprinted polymer (MIP) modified closed bipolar electrodes for high sensitivity detection of L-Phe and D-phenylalanine (D-Phe). In the anode chamber of a bipolar electrode modified with phenylalanine imprinting, Ru (bpy)32+ underwent a redox reaction to produce a chemiluminescence response under the stimulation of a driving voltage. At the same time, the reduction of the cathode film of the bipolar electrode was promoted, and the color changed from dark blue to nearly white. Thus, the dual-mode detection of target molecules is realized. The detection range of the sensor for phenylalanine reached 0.01-10,000 nM, and the detection limits of L-Phe and D-Phe were 3.9 pM and 4.6 pM (S/N = 3), respectively. This dual-mode system achieved high stability and high specificity, and also successfully realized the detection of actual samples, which is expected to achieve future clinical applications.

Highly sensitive electrochemical detection of cholesterol based on Au-Pt NPs/PAMAM-ZIF-67 nanomaterials

A cholesterol biosensor was constructed by bimetallic (Au and Pt) and poly(amidoamine)-zeolite imidazole framework (PAMAM-ZIF-67). First, PAMAM-ZIF-67 nanomaterial was immobilized onto the electrode, and then Au and Pt were modified on the electrode by the electro-deposition method. Subsequently, cholesterol oxidase (ChOx) and cholesterol esterase (ChEt) were fixed on the electrode. The stepwise modification procedures were recorded by impedance spectroscopy and voltammetry. The current response presented a linear relation to the logarithm of cholesterol content when content ranged between 0.00015 and 10.24 mM, and the minimum detection concentration reached 3 nM. The electrode was also used for the cholesterol assay in serum, which hinted at its potentially valuable in clinical diagnostics. An electrochemical biosensor based on gold nanoparticles, platinum nanoparticles, and polyamide-zeolitic imidazolate frameworks was developed for detection of cholesterol. First, polyamide-zeolitic imidazolate frameworks nanomaterial was fixed onto the electrode modified of mercaptopropionic acid by Au-S bond. Then, gold nanoparticles and platinum nanoparticles were electrodeposited on the above electrode. Subsequently, cholesterol oxidase and cholesterol esterase were co-immobilized on the surface of the modified electrode to fabricate the cholesterol biosensor. The biosensor has also been used for the measurement of cholesterol in human serum, which implied potential applications in biotechnology and clinical diagnostics.

Tungsten-based polyoxometalate nanoclusters with remarkable reactive oxygen species-scavenging activity efficiently quenched luminol-based electrochemiluminescence for sensitive detection of Her-2

This study aimed to develop a quenching-type electrochemiluminescence (ECL) immunosensor for human epidermal growth factor receptor (Her-2) detection. Firstly, Pd/NiFeOx nanoflowers decorated by in situ formation of gold nanoparticles (Au NPs) and 2D Ti3C2 MXene nanosheets were synthesized (AuPd/NiFeOx/Ti3C2) as carriers to load luminol and primary antibodies. Impressively, AuPd/NiFeOx/Ti3C2 with excellent peroxidase-like activity could accelerate the decomposition of the coreactant H2O2 generating more reactive oxygen species (ROSs) under the working potential from 0 to 0.8 V, resulting in highly efficient ECL emission at 435-nm wavelengths. The introduction of tungsten-based polyoxometalate nanoclusters (W-POM NCs) which exhibit remarkable ROSs-scavenging activity as secondary antibody labels could improve the sensitivity of immunosensors. The ZnO nanoflowers were employed to encapsulate minute-sized W-POM NCs, and polydopamine was self-polymerized on the surface of Zn(W-POM)O to anchor secondary antibodies. The mechanism of the quenching strategy was explored and it was found that W-POM NCs could consume ROSs by the redox reaction of W5+ resulting in W6+. The proposed ECL immunosensor displayed a wide linear response range of 0.1 pg·mL-1 to 50 ng·mL-1, and a low detection limit of 0.036 pg mL-1 (S/N = 3). The recoveries ranged from 93.9 to 99.4%, and the relative standard deviation (RSD) was lower than 10%. This finding is promising for the design of detecting new protein biomarkers.

A dual-readout sensing platform for the evaluation of cell viability integrating with optical and digital signals based on a closed bipolar electrode

Cell viability is essential for predicting drug toxicity and assessing drug effects in drug screening. However, the over/underestimation of cell viability measured by traditional tetrazolium colorimetric assays is inevitable in cell-based experiments. Hydrogen peroxide (H2O2) secreted by living cells may provide more comprehensive information about the cell state. Hence, it is significant to develop a simple and rapid approach for evaluating cell viability by measuring the excreted H2O2. In this work, we developed a dual-readout sensing platform based on optical and digital signals by integrating a light emitting diode (LED) and a light dependent resistor (LDR) into a closed split bipolar electrode (BPE), denoted as BP-LED-E-LDR, for evaluating cell viability by measuring the H2O2 secreted from living cells in drug screening. Additionally, the customized three-dimensional (3D) printed components were designed to adjust the distance and angle between the LED and LDR, achieving stable, reliable and highly efficient signal transformation. It only took 2 min to obtain response results. For measuring the exocytosis H2O2 from living cells, we observed a good linear relationship between the visual/digital signal and logarithmic function of MCF-7 cell counts. Furthermore, the fitted half inhibitory concentration curve of MCF-7 to doxorubicin hydrochloride obtained by the BP-LED-E-LDR device revealed a nearly identical tendency with the cell counting kit-8 assay, providing an attainable, reusable, and robust analytical strategy for evaluating cell viability in drug toxicology research.

Decoupling of the Confused Complex in Oxidation of 3,3',5,5'-Tetramethylbenzidine for the Reliable Chromogenic Bioassay

Regulation of the reaction pathways is a perennial theme in the field of chemistry. As a typical chromogenic substrate, 3,3',5,5'-tetramethylbenzidine (TMB) generally undertakes one-electron oxidation, but the product (TMBox1) is essentially a confused complex and is unstable, which significantly hampers the clinic chromogenic bioassays for more than 50 years. Herein, we report that sodium dodecyl sulfate (SDS)-based micelles could drive the direct two-electron oxidation of TMB to the final stable TMBox2. Rather than activation of H2O2 oxidant in the one-electron TMB oxidation by common natural peroxidase, activation of the TMB substrate by SDS micelles decoupled the thermodynamically favorable complex between TMBox2 with unreacted TMB, leading to an unusual direct two-electron oxidation pathway. Mechanism studies demonstrated that the complementary spatial and electrostatic isolation effects, caused by the confined hydrophobic cavities and negatively charged outer surfaces of SDS micelles, were crucial. Further cascading with glucose oxidase, as a proof-of-concept application, allowed glucose to be more reliably measured, even in a broader range of concentrations without any conventional strong acid termination.

Photocatalytic Self-Fenton System of g-C3N4-Based for Degradation of Emerging Contaminants: A Review of Advances and Prospects

The discharge of emerging pollutants in the industrial process poses a severe threat to the ecological environment and human health. Photocatalytic self-Fenton technology combines the advantages of photocatalysis and Fenton oxidation technology through the in situ generation of hydrogen peroxide (H2O2) and interaction with iron (Fe) ions to generate a large number of strong reactive oxygen species (ROS) to effectively degrade pollutants in the environment. Graphite carbon nitride (g-C3N4) is considered as the most potential photocatalytic oxygen reduction reaction (ORR) photocatalyst for H2O2 production due to its excellent chemical/thermal stability, unique electronic structure, easy manufacturing, and moderate band gap (2.70 eV). Hence, in this review, we briefly introduce the advantages of the photocatalytic self-Fenton and its degradation mechanisms. In addition, the modification strategy of the g-C3N4-based photocatalytic self-Fenton system and related applications in environmental remediation are fully discussed and summarized in detail. Finally, the prospects and challenges of the g-C3N4-based photocatalytic self-Fenton system are discussed. We believe that this review can promote the construction of novel and efficient photocatalytic self-Fenton systems as well as further application in environmental remediation and other research fields.

Newly Developed Electrochemiluminescence Based on Bipolar Electrochemistry for Multiplex Biosensing Applications: A Consolidated Review

Recently, there has been an upsurge in the extent to which electrochemiluminescence (ECL) working in synergy with bipolar electrochemistry (BPE) is being applied in simple biosensing devices, especially in a clinical setup. The key objective of this particular write-up is to present a consolidated review of ECL-BPE, providing a three-dimensional perspective incorporating its strengths, weaknesses, limitations, and potential applications as a biosensing technique. The review encapsulates critical insights into the latest and novel developments in the field of ECL-BPE, including innovative electrode designs and newly developed, novel luminophores and co-reactants employed in ECL-BPE systems, along with challenges, such as optimization of the interelectrode distance, electrode miniaturization and electrode surface modification for enhancing sensitivity and selectivity. Moreover, this consolidated review will provide an overview of the latest, novel applications and advances made in this field with a bias toward multiplex biosensing based on the past five years of research. The studies reviewed herein, indicate that the technology is rapidly advancing at an outstanding purse and has an immense potential to revolutionize the general field of biosensing. This perspective aims to stimulate innovative ideas and inspire researchers alike to incorporate some elements of ECL-BPE into their studies, thereby steering this field into previously unexplored domains that may lead to unexpected, interesting discoveries. For instance, the application of ECL-BPE in other challenging and complex sample matrices such as hair for bioanalytical purposes is currently an unexplored area. Of great significance, a substantial fraction of the content in this review article is based on content from research articles published between the years 2018 and 2023.

Paper-based bipolar electrode electrochemiluminescence sensors for point-of-care testing

In the past few years, point-of-care testing (POCT) technology has crossed the boundaries of laboratory determination and entered the stage of practical applications. Herein, the latest advances and principal issues in the design and fabrication of paper-based bipolar electrode electrochemiluminescence (BPE-ECL) sensors, which are widely used in the POCT field, are highlighted. After introducing the attractive physical and chemical properties of cellulose paper, various approaches aimed at enhancing the functions of the paper, and their underlying principles are described. The materials typically employed for fabricating paper-based BPE are also discussed in detail. Subsequently, the universal method of enhancing BPE-ECL signal and improving detection accuracy is put forward, and the ECL detector widely used is introduced. Furthermore, the application of paper-based BPE-ECL sensors in biomedical, food, environmental and other fields are displayed. Finally, future opportunities and the remaining challenges are analyzed. It is expected that more design concepts and working principles for paper-based BPE-ECL sensors will be developed in the near future, paving the way for the development and application of paper-based BPE-ECL sensors in the POCT field and providing certain guarantee for the development of human health.

Preparation of oxidized acetylene black by high-temperature calcination for luminol efficient cathodic electrochemiluminescence

The improvement of electrochemiluminescence (ECL) intensity in luminol, a classic electrochemiluminescent material, remains a controversial topic. In this study, synthesis of acetylene black oxide (ACETO) through simple air annealing was successful in introducing oxygen-containing groups and defects, which can act as active sites for the oxygen reduction reaction (ORR) and exhibit excellent catalytic activity. By introducing the two-electron (2e^-) ORR into the cathode ECL system of luminol, integration of ACETO and luminol allows for in situ generation of dissolved oxygen into reactive oxygen species (ROS), thereby enhancing the ECL intensity of luminol. It is worth noting that iron-nitrogen-carbon (FeNC), as a secondary antibody (Ab₂) label, can catalyze the decomposition of H₂O₂, the product of 2e^- ORR, into ROS to achieve ECL amplification. Alpha-fetoprotein (AFP), an important tumor marker, was successfully detected with a detection limit of 0.01 pg/mL, indicating that this ECL signal amplification strategy has broad application prospects in biological analysis.

Cu-MOFs/GOx Bifunctional Probe-Based Synergistic Signal Amplification Strategy: Toward Highly Sensitive Closed Bipolar Electrochemiluminescence Immunoassay

A closed bipolar electrochemiluminescence (BP-ECL) platform for sensitive prostate specific antigen (PSA) detection was proposed based on a novel synergistic signal amplification strategy. Specifically, glucose oxidase-loaded Cu-based metal-organic frameworks (Cu-MOFs/GOx) as bifunctional probes were bridged on the anodic interface with the target PSA as the intermediate unit. In virtue of the large loading capacity of Cu-MOFs, a large amount of a co-reactant, i.e., H₂O₂ in this L-012-based ECL system and gluconic acid were generated on the anodic pole in the presence of glucose. The generated gluconic acid could effectively degrade the Cu-MOFs to release Cu²⁺ which greatly accelerates the formation of highly active intermediates from co-reactant H₂O₂, boosting the ECL intensity. As for the cathodic pole, K₃Fe(CN)₆ with a lower reduction potential is used to reduce the driving voltage and speed up the reaction rate, further strengthening the ECL intensity. Thanks to the synergistic signal amplification effect at both two electrode poles of the BP-ECL system, highly sensitive detection of PSA was realized with a detection limit of 5.0 × 10^-14 g/mL and a wide linear range of 1.0 × 10^-13-1.0 × 10^-7 g/mL. The strategy provides a novel way for signal amplification in the BP-ECL biosensing field.

Dual-quenching electrochemiluminescence resonance energy transfer system from CoPd nanoparticles enhanced porous g-C3N4 to FeMOFs-sCuO for neuron-specific enolase immunosensing

For the diagnosis and therapy of small cell lung cancer (SCLC), the accurate and sensitive determination of neuron-specific enolase (NSE) content is crucial. This work outlines a dual-quenching electrochemiluminescence resonance energy transfer (ECL-RET) immunosensor based on the double quenching effects of iron base metal organic frameworks (FeMOFs) loaded with small sized CuO nanoparticles (FeMOFs-sCuO) towards CoPd nanoparticles (CoPdNPs) enhanced porous g-C₃N₄ (P-C₃N₄-CoPdNPs). To be specific, we prepared a porous g-C₃N₄ (P-C₃N₄) which has a rich porous structure, and significantly increased the specific surface area and the number of reaction sites of P-C₃N₄. Meanwhile, the CoPdNPs were loaded onto P-C₃N₄ to improve the ECL luminescence property of P-C₃N₄/K₂S₂O₈ system through acting as a coreaction accelerator. In addition, the ultraviolet-visible (UV-vis) absorption spectra of FeMOFs and small sized CuO nanoparticles (sCuO) showed considerable overlap with the ECL emission spectra of P-C₃N₄ appropriately. Therefore, FeMOFs with high specific surface area were prepared and well combined with sCuO to effectively dual-quenching the ECL emission of P-C₃N₄ based on resonance energy transfer. Hence, a new type ECL-RET couple made up of P-C₃N₄-CoPdNPs (donor) and FeMOFs-sCuO (acceptor) were developed for the first time. A certain amount of P-C₃N₄-CoPdNPs, Ab₁, BSA, NSE were modified layer by layer onto the electrode surface. Then FeMOFs-sCuO-Ab₂ bioconjugates was incubated through the immune recognition binding. As a result, a sandwich-type ECL biosensor was manufactured successfully for NSE immunoassay. Under optimal experimental conditions, the limit of detection (LOD) and the limit of quantitation (LOQ) of the prepared ECL sensor for NSE analysis was 20.4 fg mL^-1 and 7.99 fg mL^-1, respectively, with the relative standard deviation (RSD) of 1.68%. The linear detection range was 0.0000500-100 ng mL^-1. The studied immunosensor had satisfactory sensitivity, specificity and reproducibility, manifesting the suggested sensing strategy might offer a good technical means and theoretical basis for the sensitivity analysis of NSE and has a potential application in clinical diagnosis analysis.

Controlled Growth of MoS2 on Dendritic Ferric Oxide to Enhance Electrochemiluminescence of Nitrogen-Doped Carbon Quantum Dots for Sensitive Immunoassay

The essential expansion of electrochemiluminescence (ECL) technology into clinical detection relies on sensitive and stable signal and maintenance of the activity of the immune molecules during the analysis. This poses a critical challenge for an ECL biosensor as a luminophore in general requires high potential excitation resulting in a strong ECL signal; nevertheless, it has an irreversible effect on the activity of the antigen or antibody. Herein, a novel electrochemiluminescence (ECL) biosensor utilizing nitrogen-doped carbon quantum dots (N-CQDs) as emitters and molybdenum sulfide/ferric oxide (MoS₂@Fe₂O₃) nanocomposites as a coreaction accelerator was developed for detection of neuron-specific enolase (NSE), a biomarker of small cell lung cancer. The doping of nitrogen allows the CQDs to exhibit ECL signals with low excitation potential, with a more viable activity possible for immune molecules. MoS₂@Fe₂O₃ nanocomposites exhibit superior coreaction acceleration characteristics in hydrogen peroxide than any single component of them, and the highly branched dendrite microstructure provides a large number of binding sites for immune molecular, which is an inevitable factor for trace detection. In addition, ion beam sputtering gold particle technology is introduced into the sensor fabrication via an Au-N bond, which will provide sufficient density orientation for capturing the antibody load via the Au-N bonds. With excellent repeatability, stability, and specificity, the as-purposed sensing platform showed differentiated ECL responses of NSE range from 10.00 fg/mL to 500 ng/mL, and the limit of detection (LOD) was calculated of 6.30 fg/mL (S/N = 3). The proposed biosensor is prospective to provide a new avenue for the analysis of NSE or other biomarkers.

Hydrogen Bond Organic Frameworks as Radical Reactors for Enhancement in ECL Efficiency and Their Ultrasensitive Biosensing

Nowadays, electrochemiluminescence (ECL) efficiency of an organic emitter is closely related with its potential applications in food safety and environmental monitoring fields. In this work, 2,4,6-tris(4-carboxyphenyl)-1,3,5-triazine (TATB) was self-assembled to form hydrogen bond organic frameworks (HOFs), which worked as ideal reactors to generate highly active oxygen-containing radicals, followed by linking with isoluminol (ILu) via amide bond (termed ILu-HOFs). After covalent assembly with aminated indium-tin oxide electrode (labeled NH₂-ITO), the ECL efficiency of the ILu-HOFs NH₂-ITO showed about a 23.4-time increase over that of ILu itself in the presence of H₂O₂. Meanwhile, the enhanced ECL mechanism was mainly studied by electron paramagnetic resonance, theoretical calculation, and electrochemistry. On the above foundation, an aptamer "sandwich" ECL biosensor was constructed for detecting isocarbophos (ICP) via in situ elimination of H₂O₂ with catalase-linked palladium nanocubes (CAT-Pd NCs). The as-built sensor showed a broad linear range (1 pM to 100 nM) and a low limit of detection (LOD) down to 0.4 pM, coupled with efficient assays of ICP in lake water and cucumber juice samples. This strategy provides an effective way for the synthesis of advanced ECL emitter, coupled by showing promising applications in environmental and food analysis.

Assembled Photonic Crystal/Gold Nanoparticle Interface: A Dual Amplifying Electrochemiluminescent Aptasensor for the Ultrasensitive Detection of an Amyloid-β Monomer

Amyloid-β (Aβ) protein is considered to be a key biomarker that is closely associated with Alzheimer's disease (AD). The level of Aβ, particularly its subtle fluctuation, indicates early neuropathological changes, which poses a considerable challenge in predicting AD, considering the detection limit of sensing technologies. Herein, a new label-free sensor based on luminol electrochemiluminescence (ECL) was proposed by developing a close-packed monolayered-SiO2 array with gold (Au) nanoparticles (NPs) entrapped in their gaps as the basal electrode. The well-organized SiO2 NPs with a quasiphotonic crystal structure amplified the ECL signal via light scattering, while Au NPs amplified the signal by directly catalyzing luminol oxidation. Owing to the dual signal amplification, the proposed electrode furnished an ∼64-fold-intensified ECL signal of luminol as the sensing background. Further, the as-prepared ECL electrode served as the substrate to develop an aptasensor for the sensitive detection of Aβ. The inhibition of the ECL signal due to the suppressed diffusion of luminol to the sensor surface acts as an indicator to quantify the amount of Aβ. The transfer dynamics mechanism provides a label-free sensing strategy and facilitates the high sensitivity of the aptasensor for Aβ detection. Under optimal conditions, the developed aptasensor exhibits an ultrasensitive performance for Aβ with a very low limit of detection of 5 fM, providing a new prospect for clinical research on Aβ and a promising approach in the field of ECL sensing.

A novel enzyme-free long-lasting chemiluminescence system based on a luminol functionalized β-cyclodextrin hydrogel for sensitive detection of H2O2 in urine and cells

A novel long-lasting chemiluminescent (CL) hydrogel (β-CD@luminol-Co²⁺) was synthesized by embedding luminol and cobalt ions (Co²⁺) into β-cyclodextrin (β-CD) through non-covalent interactions. Due to its porous structure and viscosity, the synthesized β-CD@luminol-Co²⁺ hydrogel exhibited long-lasting CL properties and can emit light for 12 h under both alkaline and neutral conditions. In addition, the CL intensities of β-CD@luminol-Co²⁺ were linear with the logarithm of the hydrogen peroxide (H₂O₂) concentration in the range of 1.0 × 10^-11-1.0 × 10^-7 M, and the limit of detection (LOD) was 0.63 × 10^-11 M and 0.85 × 10^-11 M under alkaline and neutral conditions, respectively. On this basis, an enzyme-free CL sensor based on β-CD@luminol-Co²⁺ was fabricated for the sensitive detection of H₂O₂ in human urine samples under alkaline conditions, and showed good accuracy and recovery. Since β-CD@luminol-Co²⁺ showed good CL properties under neutral conditions, it can be applied to detect H₂O₂ in cells. In order to prolong the emission wavelength of β-CD@luminol-Co²⁺ for better cell imaging, β-CD@luminol-FL-Co²⁺ was prepared by adding fluorescein (FL) to β-CD@luminol-Co²⁺. The as-prepared β-CD@luminol-FL-Co²⁺ also displayed long-lasting CL properties and showed a linear relationship with H₂O₂ concentrations. In addition, the maximum emission wavelength of β-CD@luminol-FL-Co²⁺ was 520 nm, which was red-shifted by 95 nm compared with β-CD@luminol-Co²⁺. The methyl thiazolyl tetrazolium (MTT) assay results and confocal microscopy images illustrated that β-CD@luminol-FL-Co²⁺ had low toxicity and can be taken up by A549 cells. Finally, β-CD@luminol-FL-Co²⁺ was successfully applied for CL imaging and detection of intracellular H₂O₂ in A549 cells under neutral conditions. This enzyme-free long-lasting CL system with high sensitivity can also be extended to real-time monitoring of H₂O₂in vivo.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

A self-circulating electro-fenton-like process over Fe3O4-CaO2 cathode for highly efficient degradation of levofloxacin

Electro-Fenton reaction was limited by the generation of H₂O₂ and the circulation of Fe(Ⅱ)/Fe(Ⅲ). Herein, an efficient electro-Fenton-like process was constructed based on Fe₃O₄-CaO₂ cathode promoted by peroxymonosulfate (PMS). Levofloxacin (LEV) could be efficiently degraded (92.1%) and mineralized with the TOC removal of 74.5% in this self-circulating process. More importantly, the Fe₃O₄-CaO₂ exhibited good stability in the recycles due that CaO₂ was covered by Fe₃O₄, which inhibited the rapid release of H₂O₂. Mechanism analysis indicated that CaO₂ could not only replace H₂O₂ to accelerate the oxidation of Fe(Ⅱ) to Fe(Ⅲ), but also could form complexes with Fe(Ⅲ) and PMS to transfer electrons from ligands to metals, thereby enhancing the reduction of Fe(Ⅲ) to Fe(Ⅱ). As a result, the electrical consumption was significantly reduced, which was only 5.0% of the Fe₃O₄ in electro-Fenton reaction. Meanwhile, the hydrolyzed product of Ca(OH)₂ reacted with Fe(Ⅲ) in the presence of H₂O₂ and converted into CaO₂. Thus, the self-circulation of CaO₂/Ca(OH)₂ and Fe(Ⅲ)/Fe(Ⅱ) was realized, which accelerated the generation of active species, such as, ·OH, O₂·^- and ¹O₂. This work first proposed a self-circulating electro-Fenton-like system and demonstrated the potential application of Fe₃O₄-CaO₂ in the treatment of wastewater.

Dual Direct Z-Scheme Heterojunction with Stable Electron Supply to a Au/PANI Photocathode for Ultrasensitive Photoelectrochemical and Electrochromic Visualization Detection of Ofloxacin in a Microfluidic Sensing Platform

A novel dual-mode microfluidic analytical device integrating self-powered photoelectrochemical (PEC) sensing with electrochromic visualization analysis was developed for ultrasensitive ofloxacin (OFL) detection. First, an advanced dual direct Z-scheme BiVO₄@Ni-ZnIn₂S₄/Bi₂S₃ (BVZIS) heterojunction was designed as a photoanode matrix to steadily provide electrons. The dual Z-scheme structure formed in photoactive BVZIS composites greatly accelerated the migration of electrons. In addition, the doping of Ni in ZnIn₂S₄ markedly enhanced the optical absorption and promoted the separation of the photocarrier. Second, electrochromic material polyaniline-modified Au (Au/PANI) was first electrodeposited on the photocathode for immobilizing aptamers and realizing visualized readout. On the one hand, Au/PANI with excellent conductivity could receive electrons from the photoanode without external energy supply. On the other hand, PANI would be rapidly reduced by the received electrons and change its color from blue to green obviously. With the increase in OFL, the increased steric hindrance resulted in the significant decline in the PEC signal and RGBgreen value. Third, wide linear ranges of PEC (0.05 pg/mL to 150 ng/mL) and electrochromic technique (0.1 pg/mL to 100 ng/mL) as well as low detection limits of PEC (18 fg/mL) and electrochromic (30 fg/mL) sensors could achieve the ultrasensitive detection of OFL in milk and river water.

Extended Conjugation Tuning Carbon Nitride for Non-sacrificial H2 O2 Photosynthesis and Hypoxic Tumor Therapy

Artificial photocatalysis offers a clean approach for producing H₂ O₂ . However, the poor selectivity and activity of H₂ O₂ production hamper traditional industrial applications and emerging photodynamic therapy (PDT)/chemodynamic therapy (CDT). Herein, we report a C₅ N₂ photocatalyst with a conjugated C=N linkage for selective and efficient non-sacrificial H₂ O₂ production in both normoxic and hypoxic systems. The strengthened delocalization of π-electrons by linkers in C₅ N₂ downshifted the band position, thermodynamically eliminating side H₂ evolution reaction and kinetically promoting water oxidation. As a result, C₅ N₂ had a competitive solar-to-chemical conversion efficiency of 0.55 % in overall H₂ O₂ production and exhibited by far the highest activity under hypoxic conditions (698 μM h^-1 ). C₅ N₂ was further applied to hypoxic PDT/CDT with outstanding performance in apparent cancer cell death and synchronous bioimaging. The study sheds light on the photosynthesis of H₂ O₂ by carbon nitrides for health applications.

Ratiometric ECL sensor based on Apt-AuNS@Lu nanoprobe for analyzing cell swelling-induced ATP release

A novel ratiometric electrochemiluminescence (ECL) system based on gold nanostars (AuNSs) support was constructed for the determination of hypotonicity-induced ATP release from HepG2 cells. AuNS@Lu nanoprobe was used as anodic luminophore and K₂S₂O₈ as cathodic luminophore as well as anodic co-reactant. AuNS with the large specific surface was adopted to adsorb plentiful luminol to form solid-state probe and as affinity support to immobilize ATP aptamer (Apt). The obtained nanocomposite (Apt-AuNS@Lu) generated a strong ECL signal at + 0.4 V (vs. Ag/AgCl) with co-reactant K₂S₂O₈, because of excellent conductivity and catalytic activity of AuNS. Furthermore, graphene oxide was reduced onto indium tin oxide (ITO) electrodes to facilitate the electron transfer. Following, polydopamine (PDA) film was formed via self-polymerization, improving stability and adhesion of the electrode surface. To immobilize ATP capture aptamer (Apt_C), abounding AuNSs were attached to RGO/PDA surface. When the sensor was incubated in the mixture solution of Apt-AuNS@Lu and target ATP, the ECL signal of Apt-AuNS@Lu increased with the increase of ATP concentration, meanwhile, the signal of K₂S₂O₈ declined. The ratio of the two luminophores was used for the quantitative determination of ATP. The linear range was 5 to 250 nM, and the limit of detection was 1.4 nM at (3σ)/S. The method was successfully applied to analyze ATP release from HepG2 cells stimulated by 0.45% NaCl hypotonic solution. The results showed that the release kinetics profile of ATP had a sigmoidal shape with rapid release within 10 min and then slowed. Compared to the isotonic groups, the intracellular ATP concentration was 3.7 ± 0.3 µM (n = 3) decreasing by 40.3% and the extracellular was 23.4 ± 1.2 nM (n = 3) increasing by 9.2 times in the hypotonicity for 10 min, which showed ATP release from cells and good agreement with commercial ELISA test. The proposed strategy would be beneficial to broadening application of ECL technology in studying cell biological functions.

Polydopamine-Functionalized Copper Peroxide/ZIF-8 Nanoparticle-Based Fluorescence-Linked Immunosorbent Assay for the Sensitive Determination of Carcinoembryonic Antigen by Self-Supplied H2O2 Generation

Copper peroxide/zeolitic imidazolate framework/polydopamine nanoparticles (CP/ZIF-8/PDA)-based fluorescence-linked immunosorbent assay (FLISA) was designed for the sensitive and high-throughput determination of carcinoembryonic antigen (CEA) by self-supplied H₂O₂ generation. Specifically, the CEA aptamer was modified on the surface of CP/ZIF-8/PDA to form an immunoprobe. The structures of CP and ZIF-8 could be broken under acidic conditions, and produced the Cu²⁺ and H₂O₂ due to the dissociation the CP. A subsequent Fenton-type reaction of Cu²⁺ and H₂O₂ generated hydroxyl radical (·OH). o-phenylenediamine (OPD) was oxidized by the ·OH to form 2, 3-diaminophenazine (DPA) with a significant fluorescence signal. CP/ZIF-8/PDA could be used as an efficient Fenton-type reactant to generate a large amount of ·OH to promote OPD oxidation. The sensitive detection of CEA could be realized. Under optimal conditions, the FLISA platform displayed a linear detection range from 0.01 to 20 ng mL^-1 with a detection limit of 7.6 pg mL^-1 for CEA. This strategy has great application potential for sensitive and high-throughput determination for other biomarkers in the field of biomedicine.

PEGylated Ni Single-Atom Catalysts as Ultrasensitive Electrochemiluminescent Probes with Favorable Aqueous Dispersibility for Assaying Drug-Resistant Pathogens

Ni single-atom catalysts (SACs) were synthesized by high-temperature calcination of nickel ions and 1,10-phenanthroline on carbon black as a carrier. Benefiting from the ultrahigh atom utilization efficiency, Ni SACs can significantly accelerate decay of dissolved oxygen to generate abundant reactive oxygen species through an oxygen reduction reaction occurring on cathodes. The generated reactive oxygen species can vastly enhance the electrochemiluminescent (ECL) signal of luminol without participation of exogenous co-reactants. To overcome the inherent unfavorable aqueous dispersibility of Ni SACs prepared by the calcination protocol, they were functionalized with highly hydrophilic PEG 2000. Thanks to the abundant carboxyl groups on PEG 2000, the PEGylated Ni SACs (Ni@PEG) can be used as ECL probes to tag biorecognition molecules. In this proof-of-principle work, an ECL biosensor for assaying methicillin-resistant Staphylococcus aureus was developed by using porcine IgG as capture molecule and phage cell-binding domain tagged with Ni@PEG as signal tracer. It shows a broad linear range of 73-7.3 × 10⁶ CFU/mL and a low detection limit of 25 CFU/mL. The recovery values for assaying spiked samples are between 80.8 and 119.2%. It was also utilized to assess MRSA susceptibility to four antibiotics, with results consistent with those obtained by the standard broth microdilution technique. To the best of our knowledge, it is the first time to utilize aqueous dispersible SACs as highly sensitive ECL probes for developing biosensors.

Electrochemiluminescence in paired signal electrode (ECLipse) enables modular and scalable biosensing

Electrochemiluminescence (ECL) has an inherently low background and enables precise chemical reactions through electrical control. Here, we report an advanced ECL system, termed ECLipse (ECL in paired signal electrode). We physically separated ECL generation from target detection: These two processes were carried out in isolated chambers and coupled through an electrode. The strategy allowed us to minimize cross-chemical reactions, design electrodes for high ECL signals, and integrate multiple sensors in a chip. As a proof of concept, we implemented an eight-plex ECLipse and applied it to detect host factors in human plasma. ECLipse achieved higher signal-to-noise ratio than conventional ECL assays and was >7000-fold more sensitive than enzyme-linked immunosorbent assay. In a pilot clinical study, we could detect septic conditions by measuring host factors [i.e., interleukin-3 (IL-3), IL-6, and procalcitonin (PCT)]. ECLipse assay further revealed distinct IL-3 and IL-6 patterns in patients with severe acute respiratory syndrome coronavirus 2 infection.

Electrochemiluminescence Systems for the Detection of Biomarkers: Strategical and Technological Advances

Electrochemiluminescence (ECL)-based sensing systems rely on light emissions from luminophores, which are generated by high-energy electron transfer reactions between electrogenerated species on an electrode. ECL systems have been widely used in the detection and monitoring of diverse, disease-related biomarkers due to their high selectivity and fast response times, as well as their spatial and temporal control of luminance, high controllability, and a wide detection range. This review focuses on the recent strategic and technological advances in ECL-based biomarker detection systems. We introduce several sensing systems for medical applications that are classified according to the reactions that drive ECL signal emissions. We also provide recent examples of sensing strategies and technologies based on factors that enhance sensitivity and multiplexing abilities as well as simplify sensing procedures. This review also discusses the potential strategies and technologies for the development of ECL systems with an enhanced detection ability.

A Direct Z-Scheme AgBr/CuBi2O4 Photocathode for Ultrasensitive Detection of Ciprofloxacin and Ofloxacin by Controlling the Release of Luminol in Self-Powered Microfluidic Photoelectrochemical Aptasensors

An innovative self-powered microfluidic photoelectrochemical (PEC) aptasensor was developed that uses photoactive AgBr/CuBi₂O₄ (ACO) composites as the photocathode matrix for ultrasensitive detection of ciprofloxacin (CIP) and ofloxacin (OFL). The formation of direct Z-scheme heterojunctions in ACO composites greatly aided electron/hole pair separation. Meanwhile, ZnIn₂S₄-decorated CdS nanorod arrays (CZIS) as the photoanode were used instead of a platinum counter electrode to provide electrons. The "signal-off" CIP detection was accomplished through the steric hindrance effect in the photoanode due to the combination of aptamer_(CIP) and CIP. To increase the cathodic photocurrent intensity for OFL determination, controlled release of luminol was first used. Luminol molecules were successfully embedded in the porous structure of silicon dioxide nanospheres (PSiO₂) by the electrostatic adsorption between PSiO₂ and aptamer_(OFL). The luminol released by specific recognition between OFL and aptamer_(OFL) could not only react with •O₂^- but also produce chemiluminescence emission, resulting in the "signal-on" state. Because of the signal "on-off-on", the proposed aptasensor exhibited wide linear ranges for CIP (0.001-100 ng/mL) and OFL (0.0005-100 ng/mL) detection. Furthermore, the low detection limits of CIP (0.06 pg/mL) and OFL (0.022 pg/mL) could achieve the ultrasensitive analysis.

Designing Triangular Silver Nanoplates with GSH/GSSG Surface Mixed States as Novel Nanoparticle-based Redox Mediators for Electrochemical Biosensing

Herein, a dual signal-quenched electrochemical (EC) biosensing strategy utilizing surface-engineered trisodium citrate (TSC)-glutathione (GSH)/oxidized glutathione (GSSG)-capped triangular silver nanoplates (Tri-Ag NPs_TSC-GSH/GSSG) as a novel nanoparticle-based redox mediator was explored for biomarker determination. In contrast with conventional redox mediators, Tri-Ag NPs_TSC-GSH/GSSG provided more admirable EC performance along with a lower oxidation potential (∼0.14 V). Taking advantage of the split-type mode, the immune response in a 96-well microplate was independent from EC detection, which could effectively eliminate the biological interference and thereby greatly enhance the sensitivity. As for the surface engineering process of Tri-Ag NPs, it was composed of partial GSH replacement and the formation of the GSH/GSSG surface mixed state. Primarily, the signal response of Ag NPs_TSC-GSH decreased due to the hindrance of GSH on electron transfer. Moreover, varying proportions of GSH/GSSG could further impede the oxidation process of Tri-Ag NPs_TSC-GSH/GSSG and eventually realize efficient dual signal quenching of this system. Notably, the ZIF-67@MIL-88B-GO_x nanocomposite as the label was applied for a cascade reaction system with GSH peroxidase-like activities to form the optimal GSH/GSSG proportion, causing sensitive changes in signal response with a range of different antigen concentrations. On this basis, the fabricated biosensor provided measurable outputs of aflatoxin B1 concentrations in a linear range of 0.0005-50 ng/mL with a low detection limit of 0.61 pg/mL (S/N = 3). All of the results indicated that the novel biosensor could be a promising analytical tool for future biomarker detection.

Paper-Based Bipolar Electrode Electrochemiluminescence Platform Combined with Pencil-Drawing Trace for the Detection of M.SssI Methyltransferase

Herein, a hand-drawing paper-based bipolar electrode (BPE) electrochemiluminescence (ECL) platform for M.SssI methyltransferase (M.SssI MTase) assay was proposed via employing high electrocatalytic Pt@CeO₂ as an ECL co-reaction accelerator and pencil-drawing graphite electric circuits as wires and electrodes. Notably, the introduction of pencil-drawing trace not only simplified the manufacturing process but also reduced the cost and saved fabricating time. Meanwhile, Pt@CeO₂ with good electrocatalytic activity and satisfactory chemical stability was used at the anode of the closed BPE-ECL device to accelerate the oxidation rate of uric acid. Due to the balanced charges of the bipolar electrode, the ECL response of the MnS: CdS@ZnS/S₂O₈^2- system emitted on the cathode was enhanced. In situ growth of gold nanoparticles in the two electrode areas was convenient for DNA immobilization. With the above points in mind, the specific DNA double strands functionalized via Pt@CeO₂ were employed to identify M.SssI MTase. The unmethylated DNA double strands were cut by HpaII endonuclease, resulting in the quenching of the ECL signal. Under the optimal conditions, sensitive detection of M.SssI MTase in a wide linear range of 0.01-100 U·mL^-1 with a satisfactory detection limit of 0.008 U·mL^-1 was realized. The reliable and versatile BPE-ECL tool for the determination of M.SssI MTase with easy-to-operate pencil-drawing traces and independent solution systems provides a new opportunity to develop paper-based devices applied in early disease diagnosis and pathogenesis research.

Gold Nanowires Array-Based Closed Bipolar Nanoelectrode System for Electrochemiluminescence Detection of α-Fetoprotein on Cell Surface

Inspired by the promising applications of a closed bipolar electrodes (c-BPEs) system in electrochemiluminescence (ECL) detection of cell adhesion and disease-related biomarkers, here, a gold nanowires array-based c-BPEs system was constructed for cell surface protein detection. Regular and uniform gold nanowires array were prepared by intermittent potentiostatic deposition. Then, two poly(dimethylsiloxane) (PDMS) chips with a hole diameter of 2 mm as a reservoir were placed at both sides of Au nanowires array to construct c-BPEs system. Thionine-functionalized silicon dioxide nanoparticles conjugated to antibody (Ab2-Th@SiO₂) were used as the electrochemical probe, while [Ru(bpy)₃]²⁺-wrapped SiO₂ nanoparticles (Ru(II)@SiO₂) were employed as the ECL signal readout. Taking α-fetoprotein (AFP) as model, the gold nanowires array-based c-BPEs system allowed sensitive detection of AFP at a linear range from 0.002 to 50.0 ng/mL and at least 6 living cells ascribing to the synergetic amplification effect at both sensing and reporting chambers. Besides, the amount of AFP expressed by HepG2 cells was calculated to be 6.71 pg/cell. The presented strategy with high sensitivity provided a promising and universal platform for the detection of other cancer cells and disease-related biomarkers (such as proteins, glycan, miRNA).

Shared-cathode closed bipolar electrochemiluminescence cloth-based chip for multiplex detection

Electrochemiluminescence (ECL) chips have been widely used in the field of medical diagnosis. However, most of these chips currently in use are costly and require high amounts of sample. In this work, we present, for the first time, a shared-cathode closed bipolar electrochemiluminescence (SC-CBP-ECL) cloth-based chip, which can be used for multiplex detection. The SC-CBP-ECL chips ($0.03-0.05 for each chip) are manufactured using carbon ink- and wax-based screen-printing techniques, without the need for expensive and complex fabrication equipment. Under optimised conditions, the SC-CBP-ECL chips were successfully used for coinstantaneous detection of glucose in double ECL systems (i.e., Ru(bpy)₃²⁺ and luminol), with corresponding linear ranges of 0.05-1 mM and 0.05-10 mM, and detection limits of 0.0382 mM and 0.0422 mM. To our knowledge, this is the first report on the application of fibre material-based closed bipolar electrodes (C-BPE) combined with double ECL systems. Furthermore, the SC-CBP-ECL chips exhibit an acceptable specificity and good reproducibility and stability and can be used for glucose detection in human serum samples with a good agreement compared with the clinical method. Finally, the SC-CBP-ECL chips could be successfully used for simultaneous detection of seven glucose samples and also show potential for simultaneous detection of three different targets (hydrogen peroxide [H₂O₂], glucose, and uric acid [UA]). Therefore, we believe that the chip described in this study has broad potential application in the field of cost-effective multiplex detection.

Ultrasensitive electrochemiluminescence sensor based on perovskite quantum dots coated with molecularly imprinted polymer for prometryn determination

A highly effective molecularly imprinted electrochemiluminescence sensor was constructed for prometryn determination in environmental and biological samples by using perovskite quantum dots coated with a molecularly imprinted silica layer (MIP/CsPbBr₃-QDs) as the recognition and response element. MIP/CsPbBr₃-QDs were immobilized on a glassy carbon electrode (GCE) through electropolymerization, and the electrochemiluminescence (ECL) response of MIP/CsPbBr₃-QDs could be motivated under the condition of H₂O₂ as co-reactant. ECL signal was selectively quenched with prometryn by hindering electron transfer and directly proportional to the logarithm of prometryn concentration (0.10-500.0 μg/L) with a correlation coefficient of 0.9960. Limits of detection in fish and seawater samples were 0.010 μg/kg and 0.050 μg/L, respectively. Excellent recoveries of 88.0%-106.0% were acquired for fish and seawater samples with a relative standard deviation below 4.2%. The constructed MIECL sensor based on MIP/CsPbBr₃-QDs showed good stability, accuracy, and precision for sensitive detection of prometryn in aquaculture products and environmental samples.

Fabrication of a Stable Europium-Based Luminescent Sensor for Fast Detection of Urinary 1-Hydroxypyrene Constructed from a Tetracarboxylate Ligand

A novel europium-centered metal-organic framework fabricated from a symmetric and rigid ligand with tetracarboxylate groups, 2,6-di(2',5'-dicarboxylphenyl)pyridine (H₄ddpp), has been synthesized solvothermally. Characterized by single-crystal X-ray diffraction, compound 1 features a 3D microporous structure with a butterfly-shaped trinuclear Eu₃(COO)₆ secondary building unit. Interestingly, three kinds of 1D open channels viewed in different directions in compound 1 are discovered, and the void ratio is calculated to be 47.5% by PLATON software. Solid-state luminescent experiments at 298 K reveal that compound 1 displays naked-eye characteristic red emission of Eu³⁺ ions monitoring the typical ⁵D₀ → ⁷F₂ transition. The exploration of luminescent sensing tests discloses that compound 1 has an outstanding capacity for recognizing urinary 1-hydroxypyrene (1-HP) with a quite fast response and high sensitivity, giving the quenching efficiency of 98.2% after the immersion time for just 1 min and 73.2% with the amount of 1-HP only 0.05 mg/mL. To our knowledge, it is the first reported Eu-MOF as an extremely fast-responsive and highly sensitive luminescent sensor for 1-HP which is interference-free from other urinary components. Furthermore, the successful preparation of the luminescent test papers makes compound 1 convenient, easy, and real-time in the application for sensing 1-HP in biomedical and biological fields.

In situ growth of TiO2 nanowires on Ti3C2 MXenes nanosheets as highly sensitive luminol electrochemiluminescent nanoplatform for glucose detection in fruits, sweat and serum samples

A sensitive electrogenerated chemiluminescence (ECL) biosensor for glucose was developed based on in situ growth of TiO₂ nanowires on Ti₃C₂ MXenes (TiO₂-Ti₃C₂) as the nanoplatform. Via tuning the alkaline oxidation time, different amount of TiO₂ nanowires can be found on MXenes. An ECL biosensor for glucose was constructed by covalent immobilization of glucose oxidase (GODx) on the glycine functional TiO₂-Ti₃C₂ surface, with the ECL signal depending on the in-situ formation of H₂O₂ via the specifically catalysis of glucose by GODx, resulting in the apparent increase of ECL signal. The TiO₂-Ti₃C₂ can also act as the catalyst for the oxidation of H₂O₂ into O₂ to enhance the ECL of luminol. Based on this strategy, a highly sensitive ECL biosensor for glucose was obtained in wide concentration range of 20 nM-12 mM with a low detection limit of 1.2 nM (S/N = 3). The synergistic effects of large surface area, excellent conductivity, and high catalytic activity of the TiO₂-Ti₃C₂ make the sensor highly sensitive toward glucose; the specific enzyme catalysis reaction promises excellent selectivity of the ECL sensor. The proposed biosensor has been employed to detect glucose in human serum, fruits, and sweat samples with excellent performance, providing a universal approach for glucose in various samples, which shows great prospect in clinical diagnostics and wearable sensors.

Dual-Mode Sensing Platform for Electrochemiluminescence and Colorimetry Detection Based on a Closed Bipolar Electrode

Development of sensors uniting different sensing principles is in line with the concept of reliable, comprehensive, and diversified equipment construction. However, the current exploration in this field is obstructed by compromise of reaction conditions and inevitable mutual interference arising from different sensing modes. This work reported a closed bipolar electrode (c-BPE) strategy for dual-modality detection or dual-target detection. To this end, a c-BPE sensing platform installed in physically separated anode and cathode compartments was well designed and carefully optimized. If luminol was present in the anode section and Prussian blue (PB) was at the cathode part, single stimulation could realize electrochemiluminescence (ECL) from luminol at the anode and conversion of PB to Prussian white (PW) at the cathode. The latter reaction helped elevate the ECL signal and also prepared for colorimetric detection as color change from PW to PB under the trigger of oxidant (like H₂O₂) was used to track the content of the oxidant. Thus, dual signals were obtained for dual-modality detection of single target or the detection of different targets was realized at different poles. Detection of glucose was carried out to validate the application for dual-modality detection, while VLDL/AChE and NADH/H₂O₂ assays illustrated the potential of dual-target detection. The proposed platform possesses outstanding sensing performance including selectivity, repeatability, long-term stability, accuracy, and so forth. This work implements a breakthrough in designing dual-mode sensors and is expected to present a rational basis for development of a diversified sensing platform.

A novel metal organic gel with superior oxidase-like activity for efficient and sensitive chemiluminescence detection of uric acid

It is found that MIL-100(Fe) gels, as a kind of metal-organic gels (MOGs), constitutting of iron (Fe³⁺) and trimesic acid (H₃BTC), has been regarded as the efficient catalyst of luminol chemiluminescence (CL) system without the presence of extra oxidants in the present work. MIL-100(Fe) gels that have possessed mimicking oxidase-like activity can excellently enhanced luminol CL intensity by accelerating the generation of reactive oxygen species. Furthermore, with the addition of uric acid (UA), the CL signal has been dramatically inhibited under alkaline condition. Hence, the CL intensity inhibiting ratio (I₀/I_S) was proportional to the increasing concentration of UA in the rang from 10 nM to 4000 nM with the detection limit of 5.9 nM. This method has been successfully applied for analysis of UA with acceptable recoveries ranging from 97.0% to 107.9% in urine sample. These results indicates that this study open up a novel, sensitive and convenient method to detect UA in biological samples.

Liposome-assisted enzyme catalysis: toward signal amplification for sensitive split-type electrochemiluminescence immunoassay

Developing an efficient signal amplification strategy is very important to improve the sensitivity of bioanalysis. In this paper, a liposome-assisted enzyme catalysis signal amplification strategy was developed for electrochemiluminescence (ECL) immunoassay of prostate specific antigen (PSA) in a split-type mode. The sandwich immunoreaction occurred in a 96-well plate, and glucose oxidase (GOx) encapsulated and antibody-modified liposomes were used as labels. The ECL detection was carried out using a rGO-Au NP modified glassy carbon electrode (GCE). The large amount of generated H2O2, i.e. the coreactant of the luminol system, and the excellent catalytic behavior of rGO-Au NPs greatly boosted the ECL signal, resulting in the signal amplification. The developed ECL immunosensor for detecting PSA achieved a wider linear range from 1.0 × 10-13 to 1.0 × 10-8 g mL-1 and a detection limit of 1.7 × 10-14 g mL-1. The application of the proposed strategy was demonstrated by analyzing PSA in human serum samples with recoveries from 89.0% to 113.0%, and relative standard deviations (RSDs) were less than 6.6%. This work provides a new horizon to expand the application of liposomes for ECL bioanalysis.

Modulating Oxygen Reduction Behaviors on Nickel Single-Atom Catalysts to Probe the Electrochemiluminescence Mechanism at the Atomic Level

Luminol-dissolved O₂ electrochemiluminescence (ECL)-sensing platforms have been widely developed for sensitive and reliable detection, while their actual ECL mechanisms are still in controversy due to the involved multiple reactive oxygen species (ROS). Different from the structural complexity of nanomaterials, well-defined single-atom catalysts (SACs) as coreaction accelerators will provide great prospects for investigating the ECL mechanism at the atomic level. Herein, two carbon-supported nickel SACs with the active centers of Ni-N₄ (Ni-N₄/C) and Ni-N₂O₂ (Ni-N₂O₂/C) were synthesized as efficient coreaction accelerators to enhance the ECL signals of a luminol-dissolved O₂ system. By modulating the surrounding environment of the center metal atoms, their corresponding oxygen reduction behaviors can be well controlled to selectively produce intermediate ROS, giving a great chance to study the following ECL process. According to the experimental and calculated results, the superoxide radical (O₂^•-) acts as the main radical for the ECL reaction and the Ni-N₄/C catalyst with the four-electron pathway to activate dissolved O₂ is preferential to enhance ECL emission.