Label-free impedimetric aptasensor for ochratoxin-A detection using iridium oxide nanoparticles

Platinum Group Metals Nanoparticles in Breast Cancer Therapy

Despite various methods currently used in cancer therapy, breast cancer remains the leading cause of morbidity and mortality worldwide. Current therapeutics face limitations such as multidrug resistance, drug toxicity and off-target effects, poor drug bioavailability and biocompatibility, and inefficient drug delivery. Nanotechnology has emerged as a promising approach to cancer diagnosis, imaging, and therapy. Several preclinical studies have demonstrated that compounds and nanoparticles formulated from platinum group metals (PGMs) effectively treat breast cancer. PGMs are chemically stable, easy to functionalise, versatile, and tunable. They can target hypoxic microenvironments, catalyse the production of reactive oxygen species, and offer the potential for combination therapy. PGM nanoparticles can be incorporated with anticancer drugs to improve efficacy and can be attached to targeting moieties to enhance tumour-targeting efficiency. This review focuses on the therapeutic outcomes of platinum group metal nanoparticles (PGMNs) against various breast cancer cells and briefly discusses clinical trials of these nanoparticles in breast cancer treatment. It further illustrates the potential applications of PGMNs in breast cancer and presents opportunities for future PGM-based nanomaterial applications in combatting breast cancer.

Lattice matching enables construction of CaS@NaYF4 heterostructure with synergistically enhanced water resistance and luminescence for antibiotic detection

Rare earth (RE)-doped CaS phosphors have been widely used as light-emitting components in various fields. Nevertheless, the application of nanosized CaS particles is still significantly limited by their poor water resistance and weak luminescence. Herein, a lattice-matching strategy is developed by growing an inert shell of cubic NaYF4 phase on the CaS luminescent core. Due to their similarity in crystal structure, a uniform core-shell heterostructure (CaS:Ce3+@NaYF4) can be obtained, which effectively protects the CaS:Ce3+ core from degradation in aqueous environment and enhances its luminescence intensity. As a proof of concept, a label-free aptasensor is further constructed by combining core-shell CaS:Ce3+@NaYF4 and Au nanoparticles (AuNPs) for the ultrasensitive detection of kanamycin antibiotics. Based on the efficient FRET process, the detection linear range of kanamycin spans from 100 to 1000 nM with a detection limit of 7.8 nM. Besides, the aptasensor shows excellent selectivity towards kanamycin antibiotics, and has been successfully applied to the detection of kanamycin spiked in tap water and milk samples, demonstrating its high potential for sensing applications.

Sequential Regulation of Local Reactive Oxygen Species by Ir@Cu/Zn-MOF Nanoparticles for Promoting Infected Wound Healing

Most antimicrobials treat wound infections by an oxidation effect, which is induced by the generation of reactive oxygen species (ROS). However, the potential harm of the prolonged high level of ROS should not be ignored. In this study, we presented a novel cascade-reaction nanoparticle, Ir@Cu/Zn-MOF, to effectively regulate the ROS level throughout the healing progress of the infected wound. The nanoparticles consisted of a copper/zinc-modified metal-organic framework (Cu/Zn-MOF) serving as the external structure and an inner core composed of Ir-PVP NPs, which were achieved through a process known as "bionic mineralization". The released Cu2+ and Zn2+ from the shell structure contributed to the production of ROS, which acted as antimicrobial agents during the initial stage. With the disintegration of the shell, the Ir-PVP NP core was gradually released, exhibiting the property of multiple antioxidant enzyme activities, thereby playing an important role in clearing excessive ROS and alleviating oxidative stress. In a full-layer infected rat wound model, Ir@Cu/Zn-MOF nanoparticles presented exciting performance in promoting wound healing by clearing the bacteria and accelerating neovascularization as well as collagen deposition. This study provided a promising alternative for the repair of infected wounds.

Colorimetric and photothermal dual-mode aptasensor with redox cycling amplification for the detection of ochratoxin A in corn samples

Ochratoxin A (OTA) detection is critical for public health safety. This study proposes a G-quadruplex-Hemin/iodide (G4-Hemin/I-)-mediated non-enzyme redox cycling amplification (RCA) system for dual-modal (colorimetric and photothermal thermometer) OTA analysis. The proposed aptasensor platform for point-of-care testing employs a common thermometer for quantitative signal readouts. The OTA aptamer folds into a G4 structure, which significantly enhances the catalytic activity in the presence of I- after RCA reaction. Moreover, a notable temperature enhancement causes color changes, providing an ultrasensitive and label-free platform for OTA detection. Further, the designed sensor was applied to OTA content determination in corn samples and achieved satisfactory results compared to a commercial enzyme-linked immunoassay kit. The proposed dual-mode aptasensor is simple, highly sensitive (1 pg/mL for colorimetric method, 0.8 pg/mL for photothermal method), selective, and suitable for low-cost instrument-free bioanalysis in low-resource settings.

Enhanced sensitivity in electrochemical detection of ochratoxin A within food samples using ferrocene- and aptamer-tethered gold nanoparticles on disposable electrodes

Ensuring food security is crucial for public health, and the presence of mycotoxins, produced by fungi in improperly stored processed or unprocessed food, poses a significant threat. This research introduces a novel approach - a disposable aptasensing platform designed for the detection of ochratoxin A (OTA). The platform employs gold-nanostructured screen-printed carbon electrodes functionalized with a ferrocene derivative, serving as an integrated faradaic transducing system, and an anti-OTA aptamer as a bioreceptor site. Detection relies on the ferrocene electrochemical signal changes induced by the aptamer folding in the presence of the target molecule. Remarkably sensitive, the platform detects OTA within the range of 0.5 to 70 ng mL-1 and a detection limit of 11 pg mL-1. This limit is approximately 200 times below the levels stipulated by the European Commission for agricultural commodities. Notably, the sensing device exhibits efficacy in detecting OTA in complex media, such as roasted coffee beans and wine, without the need for sample pretreatment, yielding accurate recoveries. Furthermore, while label-free electrochemical aptasensors have proliferated, this study addresses a gap in understanding the binding mechanisms of some aptasensors. To enhance the experimental findings, a theoretical study was conducted to underscore the specificity of the anti-OTA aptamer as a donor for OTA detection. The molecular docking technique was employed to unveil the key binding region of the aptamer, providing valuable insights into the aptasensor specificity.

Strategies to control mycotoxins and toxigenic fungi contamination by nano-semiconductor in food and agro-food: a review

Mycotoxins are toxic secondary metabolites generated from toxigenic fungi in the contaminated food and agro-food, which have been regarded as a serious threat to the food safety and human health. Therefore, the control of mycotoxins and toxigenic fungi contamination is of great significance and has attracted the increasing attention of researchers. As we know, nano-semiconductors have many unique properties such as large surface area, structural stability, good biocompatibility, excellent photoelectrical properties, and low cost, which have been developed and applied in many research fields. Recently, nano-semiconductors have also been promisingly applied in mitigating or controlling mycotoxins and toxigenic fungi contaminations in food and agro-food. In this review, the type, occurrence, and toxicity of main mycotoxins in food and agro-food were introduced. Then, a variety of strategies to mitigate the mycotoxin contamination based on nano-semiconductors involving mycotoxins detection, inhibition of toxigenic fungi, and mycotoxins degradation were summarized. Finally, the outlook, opportunities, and challenges have prospected in the future for the mitigation of mycotoxins and toxigenic fungi based on nano-semiconductors.

Electrochemical aptasensors for pathogenic detection toward point-of-care diagnostics

A biosensor system refers to a biomedical device, which detects biological, chemical, or biochemical components by converting those signals to an electrical signal by utilizing and uniting physical or chemical transducer with biorecognition elements. An electrochemical biosensor is generally based on the reaction of either production or consumption of electrons under a three-electrode system. Biosensor systems are exploited in a wide range of areas, such as medicine, agriculture, husbandry, food, industry, environment protection, quality control, waste disposal, and the military. Pathogenic infections are the third leading cause of death worldwide after cardiovascular diseases and cancer. Therefore, there is an urgent need for effective diagnostic tools to control food, water, and soil contamination result in protecting human life and health. Aptamers are peptide or oligonucleotide-based molecules that show very high affinity to their targets that are produced from large pools of random amino acid or oligonucleotide sequences. Generally, aptamers have been utilized for fundamental sciences and clinical implementations for their target-specific affinity and have been intensely exploited for different kinds of biosensor applications for approximately 30 years. The convergence of aptamers with biosensor systems enabled the construction of voltammetric, amperometric, and impedimetric biosensors for the detection of specific pathogens. In this review, electrochemical aptamer biosensors were evaluated by discussing the definition, types, and production techniques of aptamers, the advantages of aptamers as a biological recognition element against their alternatives, and a wide range of aptasensor examples from literature in the detection of specific pathogens.

A label-free colorimetric 3D paper-based device for ochratoxin A detection using G-quadruplex/hemin DNAzyme with a smartphone readout

The colorimetric sensor usually depends on enzyme-mediated signal amplification to achieve trace analysis of ochratoxin A (OTA) residues in food samples. However, the enzyme labeling and manual addition of reagents steps increased assay time and operation complexity, restricting their application in point-of-care testing (POCT). Herein, we report a label-free colorimetric device integrating a 3D paper-based analytical device and a smartphone as handheld readout for rapid and sensitive detection of OTA. Using vertical-flow design, the paper-based analytical device enables the specific recognition of target and self-assembly of G-quadruplex (G4)/hemin DNAzyme to be performed, then employs DNAzyme for transducing the OTA binding event signal into a colorimetric signal. The design of independent functional units, including biorecognition unit, self-assembly unit and colorimetric units, which can address crowding and disorder of biosensing interfaces and improve the recognition efficiency of aptamer (apta). In addition, we eliminated signal losses and nonuniform coloring by introducing carboxymethyl chitosan (CMCS) to obtain perfectly focused signals on colorimetric unit. On the basis of parameter optimization, the device exhibited a detection range of 0.1-500 ng/mL and a detection limit of 41.9 pg/mL for OTA. Importantly, good results were obtained in spiked real samples, indicating applicability and reliability of developed device.

Quantitative and qualitative analysis of ochratoxin-A using fluorescent CQDs@DNA-based nanoarchitecture assembly to monitor food safety and quality

Ochratoxin A (OTA), a mycotoxin formed by various fungi, such as Aspergillus and Penicillium species, is dangerous to human health. Thus, to circumvent the risk of OTA ingestion, the recognition and quantification of OTA levels are of great significance. A perusal of the literature has revealed that the integration of DNA/Carbon Quantum Dot (CQD)-based hybrid systems may exhibit the unique electronic and optical properties of nanomaterials/nanoarchitecture and consequent recognition properties. Herein, we developed the CQDs@DNA-based hybrid nanoarchitecture system for the selective detection of OTA, which exhibits modulation in the emission spectrum after interaction with OTA, with a significant binding constant (K_a = 3.5 × 10⁵ M^-1), a limit of detection of 14 nM, limit of quantification of 47 nM and working range of 1-10 μM. The mechanism for sensing the OTA has been corroborated using fluorescence, UV-visible absorption spectroscopy, and FTIR techniques, demonstrating the binding mode of CQD@DNA hybrid nano-architecture assembly with OTA. Further, we demonstrated the sensing ability of developed CQDs@DNA-based nanoarchitecture assembly towards the quantification of OTA in real food monitoring analysis for real-time applications, which makes this developed nanoarchitecture assembly the potential candidate to conveniently monitor food safety and quality for human health.

Electrochemical Aptasensor Based on ZnO-Au Nanocomposites for the Determination of Ochratoxin A in Wine and Beer

Ochratoxin A (OTA) is positively correlated with an increased risk of developing cancer in nephrotoxic and hepatotoxic patients. Therefore, it is of great significance for the highly sensitive, highly selective, and timely detection of OTA. We described here an electrochemical aptasensor for OTA analysis, which took advantage of the favorable properties of gold nanoparticles (AuNPs) functionalized zinc oxide (ZnO) composites and the intercalative binding between methylene blue (MB) and nucleic acid. There were two label-free aptamers: one to capture OTA and another serving as complementary DNA (cDNA), enabling connection to the ZnO-Au composite’s immobilized electrode. Once OTA was present, the aptamer could capture OTA and detach from the electrode interface, thus, preventing MB from accessing electrode surface for efficient electron transfer; a decreased peak current was monitored by differential pulse voltammetry. The aptasensor presented nice analytical performance for OTA detection in the range of 0.1–30,000 pg·mL−1, with a detection limit of 0.05 pg·mL−1. Moreover, the developed biosensor could be applied to actual sample (wine and beer) analysis.

Ergometrine sensing in rye flour by a magnetic bead-based immunoassay followed by flow injection analysis with amperometric detection

A certain group of mycotoxins, the ergot alkaloids, has caused countless deaths throughout human history. They are found in rye and other cereals and ingesting contaminated foods can cause serious health problems. To identify contaminated food exceeding the legal limits for ergot alkaloids, a portable and cost-effective test system is of great interest to the food industry. Rapid analysis can be achieved by screening for a marker compound, for which we chose ergometrine. We developed a magnetic bead-based immunoassay for ergometrine with amperometric detection in a flow injection system using a handheld potentiostat and a smartphone. With this assay a limit of detection of 3 nM (1 μg L^-1) was achieved. In spiked rye flour, ergometrine levels from 25 to 250 μg kg^-1 could be quantified. All results could be verified by optical detection. The developed assay offers great promise to meet the demand for on-site ergometrine detection in the food industry.

Recent Advances in Nanomaterial-Based Sensing for Food Safety Analysis

The increasing public attention on unceasing food safety incidents prompts the requirements of analytical techniques with high sensitivity, reliability, and reproducibility to timely prevent food safety incidents occurring. Food analysis is critically important for the health of both animals and human beings. Due to their unique physical and chemical properties, nanomaterials provide more opportunities for food quality and safety control. To date, nanomaterials have been widely used in the construction of sensors and biosensors to achieve more accurate, fast, and selective food safety detection. Here, various nanomaterial-based sensors for food analysis are outlined, including optical and electrochemical sensors. The discussion mainly involves the basic sensing principles, current strategies, and novel designs. Additionally, given the trend towards portable devices, various smartphone sensor-based point-of-care (POC) devices for home care testing are discussed.

Recent Progress on Techniques in the Detection of Aflatoxin B1 in Edible Oil: A Mini Review

Contamination of agricultural products and foods by aflatoxin B1 (AFB1) is becoming a serious global problem, and the presence of AFB1 in edible oil is frequent and has become inevitable, especially in underdeveloped countries and regions. As AFB1 results from a possible degradation of aflatoxins and the interaction of the resulting toxic compound with food components, it could cause chronic disease or severe cancers, increasing morbidity and mortality. Therefore, rapid and reliable detection methods are essential for checking AFB1 occurrence in foodstuffs to ensure food safety. Recently, new biosensor technologies have become a research hotspot due to their characteristics of speed and accuracy. This review describes various technologies such as chromatographic and spectroscopic techniques, ELISA techniques, and biosensing techniques, along with their advantages and weaknesses, for AFB1 control in edible oil and provides new insight into AFB1 detection for future work. Although compared with other technologies, biosensor technology involves the cross integration of multiple technologies, such as spectral technology and new nano materials, and has great potential, some challenges regarding their stability, cost, etc., need further studies.

Label-free electrochemical microfluidic biosensors: futuristic point-of-care analytical devices for monitoring diseases

The integration of microfluidics with electrochemical analysis has resulted in the development of single miniaturized detection systems, which allows the precise control of sample volume with multianalyte detection capability in a cost- and time-effective manner. Microfluidic electrochemical sensing devices (MESDs) can potentially serve as precise sensing and monitoring systems for the detection of molecular markers in various detrimental diseases. MESDs offer several advantages, including (i) automated sample preparation and detection, (ii) low sample and reagent requirement, (iii) detection of multianalyte in a single run, (iv) multiplex analysis in a single integrated device, and (v) portability with simplicity in application and disposability. Label-free MESDs can serve an affordable real-time detection with a simple analysis in a short processing time, providing point-of-care diagnosis/detection possibilities in precision medicine, and environmental analysis. In the current review, we elaborate on label-free microfluidic biosensors, provide comprehensive insights into electrochemical detection techniques, and discuss the principles of label-free microfluidic-based sensing approaches.

An aptamer-assisted biological nanopore biosensor for ultra-sensitive detection of ochratoxin A with a portable single-molecule measuring instrument

Biological nanopore-based single-molecule detection technology has shown ultrahigh sensitivity to various target analyte. But the detection scope of interesting targets is limited due to the lack of effective signal conversion strategies. In addition, conventional nanopore detection instruments are cumbersome, resulting nanopore detection can only be performed in laboratory. Herein, a customizable nanopore current amplifier is constructed to lower the cost and increase the portability of the nanopore instrument, and then an immobilized aptamer-based signal conversion strategy is proposed for α-hemolysin (α-HL) nanopore to detect small molecules (ochratoxin A, OTA). The presence of OTA in sample would trigger the release of probe single-strand DNA (ssDNA) from magnetic beads, which could subsequently cause current blockage in nanopore. The results show that the signal frequency of probe ssDNA has a linear relationship with the OTA concentration in the range of 2 × 10¹～2 × 10³ pmol/L. Compared to other methods, our sensing system has achieved an ultra-sensitive detection of OTA with the detection limit as low as 1.697 pmol/L. This strategy could broaden the scope of nanopore detection and have the potential for rapid and in-situ detection of other food contaminants in the future.

Disposable Electrochemical Aptasensor Based on Graphene Oxide-DNA Complex as Signal Amplifier towards Ultrasensitive Detection of Ochratoxin A

Signal amplification is crucial in developing a reliable disposable screen-printed carbon electrodes (SPCEs)-based biosensor for analyte detection with a narrow detection window. This work demonstrated a novel label-free electrochemical aptasensor based on SPCEs for the ultrasensitive detection of ochratoxin A (OTA). The graphene oxide-DNA (GO-DNA) complex as a signal amplifier with easy preparation was investigated for the first time. The proposed aptasensor based on the SPCEs/GO/cDNA-aptamer/3D-rGO-AuNPs structure was formed through the hybridization of aptamer-linked 3D-rGO/AuNPs and its complementary DNA-linked GO (GO-cDNA). The presence of OTA was discerned by its specific aptamer forming a curled OTA-aptamer complex and releasing the GO-cDNA from the surface of SPCEs. The resulting OTA-aptamer complex hindered interfacial electron transfer on the sensing surface, leading to the decreased peak current. The GO-cDNA further amplified the peak current change. This electrochemical aptasensor showed a low limit of detection of 5 fg/mL as well as good reproducibility with the relative standard deviation (RSD) of 4.38%. Moreover, the detection result of OTA in the rice and oat samples was comparable with that of the enzyme-linked immunosorbent assay (ELISA) kit. In general, the OTA aptasensor used in this work with convenient preparation, low-cost, good selectivity, high sensitivity and acceptable reproducibility can be proposed as a reliable point-of-care (POC) technique for OTA determination.

Ochratoxin A as alarming health in livestock and human: A review on molecular interactions, mechanism of toxicity, detection, detoxification, and dietary prophylaxis

Ochratoxin A (OTA) is a toxic metabolite produced by Aspergillus and Penicillium fungi commonly found in raw plant sources and other feeds. This review comprises an extensive evaluation of the origin and proprieties of OTA, toxicokinetics, biotransformation, and toxicodynamics of ochratoxins. In in vitro and in vivo studies, the compatibility of OTA with oxidative stress is observed through the production of free radicals, resulting in genotoxicity and carcinogenicity. The OTA leads to nephrotoxicity as the chief target organ is the kidney. Other OTA excretion and absorption rates are observed, and the routes of elimination include faeces, urine, and breast milk. The alternations in the Phe moiety of OTA are the precursor for the amino acid alternation, bringing about Phe-hydroxylase and Phe-tRNA synthase, resulting in the complete dysfunction of cellular metabolism. Biodetoxification using specific microorganisms decreased the DNA damage, lipid peroxidation, and cytotoxicity. This review addressed the ability of antioxidants and the dietary components as prophylactic measures to encounter toxicity and demonstrated their capability to counteract the chronic exposure through supplementation as feed additives.

Nanomaterial-based aptamer biosensors for ochratoxin A detection: a review

Ochratoxin A (OTA) is a widely distributed mycotoxin that often contaminates food, grains and animal feed. It poses a serious threat to human health because of its high toxicity and persistence. Therefore, the development of an inexpensive, highly sensitive, accurate and rapid method for OTA detection is imperative. In recent years, various nanomaterials used in the establishment of aptasensors have attracted great attention due to their large surface-to-volume ratio, good stability and facile preparation. This review summarizes the development of nanomaterial-based aptasensors for OTA determination and sample treatment over the past 5 years. The nanomaterials used in OTA aptasensors include metal, carbon, luminescent, magnetic and other nanomaterials. Finally, the limitations and future challenges in the development of nanomaterial-based OTA aptasensors are reviewed and discussed.

Toehold-Mediated Cascade Catalytic Assembly for Mycotoxin Detection and Its Logic Applications

In this work, an enzyme-free biosensor is reported for mycotoxin detection based on a toehold-mediated catalytic hairpin assembly (CHA) and a DNAzyme-cascaded hydrolysis reaction. In the presence of a mycotoxin, the recognition between an aptamer and the mycotoxin releases the trigger DNA. The trigger DNA initiates the toehold-mediated CHA, generating large amounts of partial duplex B/C with four toeholds, which can be used to assemble the DNAzyme-cascaded hydrolysis reaction. Furthermore, through a collaborative autoassembly reaction among the B/C duplex, DNA1, and DNA2, supramolecular nanostructures corresponding to Mg²⁺-dependent DNAzymes can be formed. With the incubation of Mg²⁺, the dual-modified (TAMRA/BHQ2) substrate strand DNA2 will be cleaved into two fragments, yielding a high TAMRA fluorescence signal for mycotoxin testing. Under optimal conditions, the sensing system was ultrasensitive and showed low detection limits of 0.2 pM for ochratoxin A (OTA), 0.13 pM for aflatoxin B1 (AFB1), and 0.17 pM for zearalenone (ZEN). The mycotoxin aptasensor also exhibited high selectivity and was successfully applied for the quantitative analysis of OTA, AFB1, and ZEN in wine samples. Due to the advantages of flexibility and versatility, this mycotoxin platform was used to fabricate several concatenated logic gates including "AND-INHIBIT", "INHIBIT-OR", "OR-AND", and "OR-INHIBIT" logic biocomputings. Such multiple functions of the logic system provided a universal sensing strategy for the intelligent detection of multiplex mycotoxins, demonstrating considerable potential in food safety and environmental monitoring.

Evolution of Supramolecular Systems Towards Next-Generation Biosensors

Supramolecular materials, which rely on dynamic non-covalent interactions, present a promising approach to advance the capabilities of currently available biosensors. The weak interactions between supramolecular monomers allow for adaptivity and responsiveness of supramolecular or self-assembling systems to external stimuli. In many cases, these characteristics improve the performance of recognition units, reporters, or signal transducers of biosensors. The facile methods for preparing supramolecular materials also allow for straightforward ways to combine them with other functional materials and create multicomponent sensors. To date, biosensors with supramolecular components are capable of not only detecting target analytes based on known ligand affinity or specific host-guest interactions, but can also be used for more complex structural detection such as chiral sensing. In this Review, we discuss the advancements in the area of biosensors, with a particular highlight on the designs of supramolecular materials employed in analytical applications over the years. We will first describe how different types of supramolecular components are currently used as recognition or reporter units for biosensors. The working mechanisms of detection and signal transduction by supramolecular systems will be presented, as well as the important hierarchical characteristics from the monomers to assemblies that contribute to selectivity and sensitivity. We will then examine how supramolecular materials are currently integrated in different types of biosensing platforms. Emerging trends and perspectives will be outlined, specifically for exploring new design and platforms that may bring supramolecular sensors a step closer towards practical use for multiplexed or differential sensing, higher throughput operations, real-time monitoring, reporting of biological function, as well as for environmental studies.

Self-Powered Photoelectrochemical Aptasensor for Oxytetracycline Cathodic Detection Based on a Dual Z-Scheme WO3/g-C3N4/MnO2 Photoanode

With the high sensitivity and anti-interference provided by a dual Z-scheme structure photoanode and a two-electrode system, a high-performance self-powered photoelectrochemical (PEC) aptasensor for oxytetracycline (OTC) detection was established in this work. Graphitic carbon nitride (g-C₃N₄) with excellent photoelectric properties was used to be combined with WO₃ and MnO₂ to form a kind of dual Z-scheme heterojunction. The designed unique structure and the complementary performances of the three materials collectively guaranteed the highly stable photocurrent output of the photoanode due to the wide range of light absorption and the high separation rate of electron-hole pairs. The aptamer-based cathode modified with reduced graphene oxide (rGO) and Au nanoparticles (Au NPs) provided high conductivity and aptamer-binding sites, which brought excellent selective recognition of OTC as well as the self-powered capacity by receiving electrons from the photoanode. In the PEC sensing of OTC, the device presented a wide detection range from 1 pM to 150 nM and a low detection limit of 0.1 pM. Besides, the developed PEC aptasenor showed good selectivity, reproducibility, and stability, so as to be applied to real samples. The proposed PEC sensing method can be considered an effective and promising direction for the detection of antibiotics in the future.

Multiple fluorescence immunoassay for the simultaneous detection of Zearalenone and Ochratoxin A

A sensitive and accurate multiple fluorescence immunoassay for the simultaneous quantitative detection of Zearalenone (ZEN) and Ochratoxin A (OTA) in single spot based on multicolor quantum dots (QDs) labeling was developed for the first time. Two kinds of ZnCdSe/ZnS (core/shell) QDs with maximum emission wavelengths at 520 nm (green) and 610 nm (orange-red) were selected as marking materials, respectively. The anti-ZEN-mAb-QDs and anti-OTA-mAb-QDs were designed as the immune fluorescent probes. Fluorescence was measured at the same excitation wavelength and two different emission wavelengths to determine each target. The procedure for QDs-based multiple fluorescence labeled immunosorbent assay (M-FLISA) was developed. The 50% inhibition concentrations (IC₅₀) of ZEN and OTA were 0.034 and 1.175 ng/mL. Moreover, the limits of detection (LOD) for the simultaneous determination were 0.0239 and 2.339 ng/g for ZEN and OTA in maize, respectively. In addition, the recoveries ranged from 93.15 to 101.90% for ZEN and from 95.29 to 102.43% for OTA, with the coefficient variation (CV) of 2.70-8.86% and 3.51-6.22% respectively. There was good consistency between the M-FLISA and high performance liquid chromatography (HPLC) results, which confirmed that the M-FLISA was suitable for the simultaneous quantitative detection of various mycotoxins.

Template-assisted Cu2O@Fe(OH)3 yolk-shell nanocages as biomimetic peroxidase: A multi-colorimetry and ratiometric fluorescence separated-type immunosensor for the detection of ochratoxin A

The convenient and effective detection of toxins is urgently demanded for food security and human health. Herein, based on the catalytic activity of mimetic peroxidase from the Cu₂O@Fe(OH)₃ yolk-shell nanocages, a dual-modal multi-colorimetric and ratiometric fluorescence immunosensor for the sensitive detection of ochratoxin A (OTA) was successfully developed. For the multi-colorimetric detection, H₂O₂ can be effectively decomposed by Cu₂O@Fe(OH)₃ to form ·OH groups, thus Au nanorods (Au NRs) can be etched to exhibit vivid color variations and localized surface plasmon resonance (LSPR) shifts. For the ratiometric fluorescence detection, o-phenylenediamine was oxidized by Cu₂O@Fe(OH)₃ to form 2,3-diaminophenazine (DAP) in the presence of H₂O₂. Interestingly, the exogenous fluorescence signal source of carbon dots can be quenched by DAP via inner filter effect, while a new emission peak at 563 nm can be discovered, forming a ratiometric fluorescence signal. Due to the independent signals and mutual confirmation, the performance of the dual-modal immunosensor for the detection of OTA was significantly improved, where a broad linear range from 1 ng/L to 10 μg/L with a detection limit of 0.56 ng/L (S/N = 3) was achieved. The sensing strategy was also used to monitor OTA in millet and lake water samples with a satisfied performance.

Recent Advances in Aptamer-Based Biosensors for Global Health Applications

Since aptamers were first reported in the early 2000s, research on their use for the detection of health-relevant analytical targets has exploded. This review article provides a brief overview of the most recent developments in the field of aptamer-based biosensors for global health applications. The review provides a description of general aptasensing principles and follows up with examples of recent reports of diagnostics-related applications. These applications include detection of proteins and small molecules, circulating cancer cells, whole-cell pathogens, extracellular vesicles, and tissue diagnostics. The review also discusses the main challenges that this growing technology faces in the quest of bringing these new devices from the laboratory to the market.

A highly efficient preconcentration route for rapid and sensitive detection of endotoxin based on an electrochemical biosensor

An impedimetric aptasensor for the detection of endotoxin in a microfluidic chip was proposed, in which the Apt/AuNPs/SPCE sensing surface was fabricated in a screen-printed electrode with good biological activity and stability. The quantitative detection of endotoxin was accomplished by electrochemical impedance spectroscopy (EIS) measurement before and after exposing to samples. The impedance biosensor offers an ultrasensitive and selective detection of endotoxin down to 500 pg mL-1 with a wide linear range from 500 pg mL-1 to 200 ng mL-1. According to the Langmuir isotherm model, the interactions between the target molecules and the sensing surface had been analyzed and strong binding was concluded. Compared to the traditional static incubation methods, the microfluidic biosensor realizes the enrichment of endotoxin owing to the confined space and continuous flow nature, so that the lowest detection concentration is reduced from 5 ng mL-1 to 500 pg mL-1, which is much lower than the existing technology, and the total assay time is shortened from 1.0 h to 0.5 h. The proposed microfluidic impedance biosensor provides a new strategy for the design of an aptasensor to realize the rapid detection of target biomolecules with high sensitivity and it can be integrated into wearable medical devices due to its flexible properties.

Label-Free and Highly-Sensitive Detection of Ochratoxin A Using One-Pot Synthesized Reduced Graphene Oxide/Gold Nanoparticles-Based Impedimetric Aptasensor

Ochratoxin A (OTA) primarily obtained by the genera aspergillus and penicillium, is one of the toxic substances for different organs and systems of the human body such as the kidney, liver, neurons and the immune system. Moreover, it is considered to cause tumors and fetal malformation even at a very low concentration. Fast and sensitive assay for detection of OTA at ultralow levels in foods and agricultural products has been an increasing demand. In this study, a new label-free electrochemical biosensor based on three-dimensional reduced graphene oxide/gold nanoparticles/aptamer for OTA detection was constructed. The 3D-rGO/Au NPs nanocomposites were firstly synthesized using a one-pot hydrothermal process under optimized experimental conditions. The 3D-rGO/Au NPs with considerable particular surface area and outstanding electrical conductivity was then coated on a glass carbon electrode to provide tremendous binding sites for -SH modified aptamer via the distinctive Au-S linkage. The presence of OTA was specifically captured by aptamer and resulted in electrochemical impedance spectroscopy (EIS) signal response accordingly. The constructed impedimetric aptasensor obtained a broad linear response from 1 pg/mL to 10 ng/mL with an LOD of 0.34 pg/mL toward OTA detection, highlighting the excellent sensitivity. Satisfactory reproducibility was also achieved with the relative standard deviation (RSD) of 1.393%. Moreover, the proposed aptasensor obtained a good recovery of OTA detection in red wine samples within the range of 93.14 to 112.75% along with a low LOD of 0.023 ng/mL, indicating its applicability for OTA detection in real samples along with economical, specific, susceptible, fast, easy, and transportable merits.

DNA walker-assisted aptasensor for highly sensitive determination of Ochratoxin A

Ochratoxin A (OTA), a toxic secondary metabolite produced via various fungus, poses a serious threat to the health of human beings and animals. In this paper, an aptasensor for OTA detection based on gold nanoparticles decorated molybdenum oxide (AuNPs-MoO_x) nanocomposites, hybridization chain reaction (HCR) and a restriction endonuclease (Nb.BbvCI)-aided walker DNA machine was successfully constructed. In this electrochemical platform, the HCR was also used to embed more electrical signal molecules of methylene blue (MB) on silver nanoparticles (AgNPs) to achieve signal amplification. Under the optimum conditions, after adding OTA and Nb.BbvCI in turn and responding adequately under appropriate conditions, aptamer-DNA (6-DNA) carries the OTA away from the electrode surface, and walker DNA was hybridized autonomously with 5-DNA, releasing a large amount of 5'-DNA with the help of Nb.BBVCI. Finally, the electrochemical signal obtained by differential pulse voltammetry (DPV) was weakened. As an artificial and popular signal amplification technique, the DNA walking machine greatly improved the sensitivity. The proposed biosensor exhibited excellent analytical performance in the range of 0.01-10000 pg mL^-1 with a detection limit as low as 3.3 fg mL^-1. Furthermore, direct comparison with ultraperformance liquid chromatography (UPLC) indicates excellent agreement to actual samples such as apple juice, orange juice, red wine and serum.

Electrochemical/visual dual-readout aptasensor for Ochratoxin A detection integrated into a miniaturized paper-based analytical device

Development of portable, sensitive and reliable devices for Ochratoxin A (OTA) detection is highly demanded, especially for resource-limited regions. Herein, a novel paper-based analytical device (PAD) is designed through wax printing and screen-printed technologies, which integrates sample flowing, electrode modification, cleaning and electrochemical (EC)/colorimetric signal output. To greatly enhance the detection sensitivity, we synthesized a chitosan functionalized MoS₂-Au@Pt (Ch-MoS₂-Au@Pt) via electrostatic self-assembly, and used it to immobilize the label aptamer (apta₂) for signal regulation and amplification. Concretely, with the addition of analytes, the Ch-MoS₂-Au@Pt-apta₂ could be combined on the sensing interface by specific biorecognition and catalyzed reduction of H₂O₂, resulting in a remarkable EC response. Meanwhile, the released hydroxyl radicals (·OH) flowed to the visualization zone and promoted the oxidation of 3,3',5,5'-tetramethylbenzidine for colorimetric detection. Consequently, the dual-mode PAD achieved acceptable prediction and accurate analysis in the range of 0.1-200 ng mL^-1 and 1 × 10^-4-200 ng mL^-1 by matching the visual and EC signal intensity, respectively. Compared with traditional single-mode sensor for OTA, the proposed dual-mode aptasensor featuring independent signal conversion and readout, not only avoided the false-positive signal associated with detection condition and operation, but also enlarged the detection ranges and improved the sensitivity. Furthermore, the consistency of EC/colorimetric assay was validated in real OTA samples. Overall, this work provided a portable, cost-effective, sensitive and visualized aptasensor platform, which could be extended to various other mycotoxins in the field of food safety.

Multi-enzyme mimetic ultrasmall iridium nanozymes as reactive oxygen/nitrogen species scavengers for acute kidney injury management

Acute kidney injury (AKI) is a kind of kidney disease with a high mortality rate, and is predominantly associated with abundant endogenous reactive oxygen/nitrogen species (RONS). However, there are no universal clinical treatment options currently. Development of antioxidants with high kidney enrichment is highly desired to prevent AKI. As a promising new artificial enzyme, nanozymes have attracted extensive attention over the past decade because of their commendable advantages over natural and traditional artificial enzymes. In this study, we reported ultrasmall polyvinylpyrrolidone-coated iridium nanoparticles (denoted as Ir NPs-PVP, 1.5 nm) as multi-enzyme mimetic to scavenge a variety of RONS, offering an efficient RONS-induced cellular protection. Meanwhile, computed tomography and inductively coupled plasma mass spectrometry demonstrated preferential renal uptake of Ir NPs-PVP following intravenous administration, leading to alleviate clinical symptoms in mice subjected to rhabdomyolysis- or cis-platinum-induced AKI. Impressively, ultrasmall Ir NPs-PVP exhibit relatively low systemic side effects in vivo due to rapid renal clearance via urine. Our work presents the clinically translatable potential of ultrasmall nanozymes for AKI management.

Spectrofluorimetric study of the complexation of ochratoxin A and Cu2+: Towards the hybrid fluorimetric sensor and visual detection of ochratoxin A in wheat flour samples from farm to fork

In this study, the ochratoxin A (OTA) interaction with some metal cations exhibits a quenching effect of the Cu²⁺, Co²⁺, and Ni²⁺ in the OTA intrinsic fluorescence intensity. The property of the OTA fluorescence change in complexation with the Cu²⁺ has been applied in developing a label-free and selective fluorimetric sensor for fast detection of the OTA trace amounts in wheat flour samples. The achieved color difference map (CDM) based on the spectral profile provides the technical support for the rapid visual sensing of OTA in the wheat flour samples. The feasibility of the hybrid fluorimetric sensor and visual OTA detection in wheat flour samples has been confirmed with the high-performance liquid chromatography (HPLC) method as a standard method. The calculated LOD (0.4 ng g^-1) and LOQ (1.2 ng g^-1) values of the proposed method are much lower than the maximum permissible limit of OTA value reported by the European Union (5 ng g^-1).

A novel colorimetric immunoassay for sensitive monitoring of ochratoxin A based on an enzyme-controlled citrate-iron(iii) chelating system

Schematic illustration of an enzyme-controlled citrate-iron(iii) chelating system-based colorimetric immunoassay for sensitive determination of ochratoxin A.

A sandwich-type ECL immunosensor for the sensitive determination of CEA content based on red emission carbon quantum dots as luminophores

A novel electrochemiluminescent immunosensor was constructed based on the quenching effect between red emission carbon quantum dots and aminated graphene.

Detection of pollutants in water bodies: electrochemical detection or photo-electrochemical detection?

The massive discharge of pollutants including endocrine-disrupting chemicals (EDCs), heavy metals, pharmaceuticals and personal care products (PPCPs) into water bodies is endangering the ecological environment and human health, and needs to be accurately detected. Both electrochemical and photo-electrochemical detection methods have been widely used for the detection of these pollutants, however, which one is better for the detection of different environmental pollutants? In this feature article, different electrochemical and photo-electrochemical detection methods are summarized, including the principles, classification, common catalysts, and applications. By summarizing the advantages and disadvantages of different detection methods, this review provides a guide for other researchers to detect pollutants in water bodies by using electrochemical and photo-electrochemical analysis.

In Silico Design of a Peptide Receptor for Dopamine Recognition

Dopamine (DA) is an important neurotransmitter with a fundamental role in regulatory functions related to the central, peripheral, renal, and hormonal nervous systems. Dopaminergic neurotransmission dysfunctions are commonly associated with several diseases; thus, in situ quantification of DA is a major challenge. To achieve this goal, enzyme-based biosensors have been employed for substrate recognition in the past. However, due to their sensitivity to changes in temperature and pH levels, new peptide bioreceptors have been developed. Therefore, in this study, four bioreceptors were designed in silico to exhibit a higher affinity for DA than the DA transporters (DATs). The design was based on the hot spots of the active sites of crystallized enzyme structures that are physiologically related to DA. The affinities between the chosen targets and designed bioreceptors were calculated using AutoDock Vina. Additionally, the binding free energy, ∆G, of the dopamine-4xp1 complex was calculated by molecular dynamics (MD). This value presented a direct relationship with the E_refine value obtained from molecular docking based on the ∆G functions obtained from MOE of the promising bioreceptors. The control variables in the design were amino acids, bond type, steric volume, stereochemistry, affinity, and interaction distances. As part of the results, three out of the four bioreceptor candidates presented promising values in terms of DA affinity and distance.

Mycotoxins aptasensing: From molecular docking to electrochemical detection of deoxynivalenol

This work proposes a voltammetric aptasensor to detect deoxynivalenol (DON) mycotoxin. The development steps of the aptasensor were partnered for the first time to a computational study to gain insights onto the molecular mechanisms involved into the interaction between a thiol-tethered DNA aptamer (80mer-SH) and DON. The exploited docking study allowed to find the binding region of the oligonucleotide sequence and to determine DON preferred orientation. A biotinylated oligonucleotide sequence (20mer-BIO) complementary to the aptamer was chosen to carry out a competitive format. Graphite screen-printed electrodes (GSPEs) were electrochemically modified with polyaniline and gold nanoparticles (AuNPs@PANI) by means of cyclic voltammetry (CV) and worked as a scaffold for the immobilization of the DNA aptamer. Solutions containing increasing concentrations of DON and a fixed amount of 20mer-BIO were dropped onto the aptasensor surface: the resulting hybrids were labeled with an alkaline phosphatase (ALP) conjugate to hydrolyze 1-naphthyl phosphate (1-NPP) substrate into 1-naphthol product, detected by differential pulse voltammetry (DPV). According to its competitive format, the aptasensor response was signal-off in the range 5.0-30.0 ng·mL^-1 DON. A detection limit of 3.2 ng·mL^-1 was achieved within a 1-hour detection time. Preliminary experiments on maize flour samples spiked with DON yielded good recovery values.

Aptamer-based electrochemical biosensing strategy toward human non-small cell lung cancer using polyacrylonitrile/polypyrrole nanofibers

In the present study, a sensitive electrochemical aptamer-based biosensing strategy for human non-small cell lung cancer (NSCLC) detection was proposed using nanofiber-modified disposable pencil graphite electrodes (PGEs). The composite nanofiber was comprised of polyacrylonitrile (PAN) and polypyrrole (PPy) polymers, and fabrication of the nanofibers was accomplished using electrospinning process onto PGEs. Development of the nanofibers was confirmed using scanning electron microscopy (SEM). The high-affinity 5'-aminohexyl-linked aptamer was immobilized onto a PAN/PPy composite nanofiber-modified sensor surface via covalent bonding strategy. After incubation with NSCLC living cells (A549 cell line) at 37.5 °C, the recognition between aptamer and target cells was monitored by electrochemical impedance spectroscopy (EIS). The selectivity of the aptasensor was evaluated using nonspecific human cervical cancer cells (HeLa) and a nonspecific aptamer sequence. The proposed electrochemical aptasensor showed high sensitivity toward A549 cells with a detection limit of 1.2 × 10³ cells/mL. The results indicate that our label-free electrochemical aptasensor has great potential in the design of aptasensors for the diagnostics of other types of cancer cells with broad detection capability in clinical analysis. Graphical abstract.