Polydimethylsiloxane-Paper Hybrid Lateral Flow Assay for Highly Sensitive Point-of-Care Nucleic Acid Testing

Sustainable Sensing with Paper Microfluidics: Applications in Health, Environment, and Food Safety

This manuscript offers a concise overview of paper microfluidics, emphasizing its sustainable sensing applications in healthcare, environmental monitoring, and food safety. Researchers have developed innovative sensing platforms for detecting pathogens, pollutants, and contaminants by leveraging the paper's unique properties, such as biodegradability and affordability. These portable, low-cost sensors facilitate rapid diagnostics and on-site analysis, making them invaluable tools for resource-limited settings. This review discusses the fabrication techniques, principles, and applications of paper microfluidics, showcasing its potential to address pressing challenges and enhance human health and environmental sustainability.

Ultra-sensitive colorimetric detection of SARS-CoV-2 by novel gold nanoparticle (AuNP)-assisted loop-mediated isothermal amplification (LAMP) and freezing methods

Loop-mediated isothermal amplification (LAMP) is a molecular diagnosis technology with the advantages of isothermal reaction conditions and high sensitivity. However, the LAMP reactions are prone to producing false-positive results and thus are usually less reliable. This study demonstrates a gold nanoparticle (AuNP)-assisted colorimetric LAMP technique for diagnosing SARS-CoV-2, which aims to overcome the false-positive results. The AuNPs were functionalized with E gene probes, specifically tailored to bind to the amplified E-gene LAMP product, using the freezing method. Varied salt concentration and AuNP/probe combinations were tested for the highest visual performance. The experiments were conducted on synthetic SARS-CoV-2 RNA (Omicron variant), as well as on clinical samples. The assay showed an exceptional sensitivity of 8.05 fg of LAMP amplicon mixture (0.537 fg/µL). The average reaction time was ~ 30 min. In conclusion, AuNP-assisted LAMP detection will not identify any potential unspecific amplification, which helps to improve the efficiency and reliability of LAMP assays in point-of-care applications. The freezing method to functionalize the AuNPs with probes simplifies the assay, which can be utilized in further diagnostic studies.

Development and evaluation of a lyophilization protocol for colorimetric RT-LAMP diagnostic assay for COVID-19

Molecular diagnostics involving nucleic acids (DNA and RNA) are regarded as extremely functional tools. During the 2020 global health crisis, efforts intensified to optimize the production and delivery of molecular diagnostic kits for detecting SARS-CoV-2. During this period, RT-LAMP emerged as a significant focus. However, the thermolability of the reagents used in this technique necessitates special low-temperature infrastructure for transport, storage, and conservation. These requirements limit distribution capacity and necessitate cost-increasing adaptations. Consequently, this report details the development of a lyophilization protocol for reagents in a colorimetric RT-LAMP diagnostic kit to detect SARS-CoV-2, facilitating room-temperature transport and storage. We conducted tests to identify the ideal excipients that maintain the molecular integrity of the reagents and ensure their stability during room-temperature storage and transport. The optimal condition identified involved adding 5% PEG 8000 and 75 mM trehalose to the RT-LAMP reaction, which enabled stability at room temperature for up to 28 days and yielded an analytical and diagnostic sensitivity and specificity of 83.33% and 90%, respectively, for detecting SARS-CoV-2. This study presents the results of a lyophilized colorimetric RT-LAMP COVID-19 detection assay with diagnostic sensitivity and specificity comparable to RT-qPCR, particularly in samples with high viral load.

Microfluidic-assisted integrated nucleic acid test strips for POCT

Numerous diseases have posed significant threats to public health, notably the global pandemic of COVID-19, resulting in widespread devastation due to its high infectivity and severity. The nucleic acid lateral flow assay (NALFA) addresses challenges of complexity, cost, and time associated with traditional assays, offering a reliable platform for rapid and precise nucleic acid target detection. NALFA is gaining prominence as a point-of-care testing (POCT) technique, thanks to its user-friendly operation and rapid results. Nevertheless, conventional NALFA relies on specialized technicians and involves labor-intensive steps like DNA extraction and PCR processes, impeding its efficiency. To overcome these limitations, integrating NALFA with microfluidic technology, widely employed in rapid field detection, holds promise. This review comprehensively outlines prevailing strategies for integrating NALFA, encompassing both research initiatives and commercial applications. Addressing the bottleneck of nucleic acid amplification as a rate-limiting step, the review delves into progress in amplification-free NALFA and highlights prevalent signal amplification techniques. Ultimately, the review outlines the future prospect of integrated NALFA development, capturing the technology's evolution and providing valuable insights for academic and commercial endeavors.

One-step paper-based SlipChip for the sensitive detection of C-reactive protein with porous platinum nanozyme-assisted signal amplification

The development of efficient and sensitive point-of-care testing is crucial for preparedness in the post-pandemic era. Although paper-based lateral flow assays have attracted attention and have various advantages for rapid, on-site diagnosis, they have low sensitivity. To overcome the limitations of the existing assays, in this study, we aimed to develop a new, one-step, nanozyme-amplified SlipChip for the sensitive detection of C-reactive protein (CRP). The SlipChip was constructed by combining wax-printed paper with different channel designs. The three-dimensional (3D) fluidic configuration of the SlipChip allowed for the sequential delivery of reagents, enabling mixing and signal amplification with a one-step sliding operation. As a signal-amplifying reagent, peroxidase-mimicking porous platinum nanozyme (pPtNZ) was synthesized using a simple wet chemical method. The pPtNZ conjugated on the test line catalyzes the oxidation of diaminobenzidine (DAB) in the presence of hydrogen peroxide, increasing the color intensity. The immunoassay results of the SlipChip were easily interpreted within 20 min, and the color intensity was visually enhanced by DAB precipitation over time, resulting in up to 6-fold signal amplification. The proposed pPtNZ-SlipChip exhibited high analytical performances for the one-step detection of serum and salivary CRP from 0.1 to 1000 ng/mL, with a limit of detection of 0.03 ng/mL. These results revealed the potential and applicability of the pPtNZ-SlipChip, with the advantages of simplicity, sensitivity, low cost, and portability for on-site detection and point-of-care testing.

Toward the Development of Simplified Lateral Flow Assays Using Hydrogels as the Universal Control Line

Lateral flow assays (LFA) have been widely utilized as point-of-care testing devices in diverse fields. However, it is imperative to preprint costly bioreceptors onto the lateral flow nitrocellulose membrane at the control line. The complex manufacturing process and relatively limited detection capabilities of LFA have impeded their utilization in more challenging fields. Here, we propose a novel and simple strategy to simplify the manufacture of LFA while simultaneously improving the sensitivity by modifying the hydrogel line (HL). In our study, it was observed that the sensitivity of commercial LFA strips could be enhanced by 2-5-fold by incorporating an extra HL. Particularly, a universal control line was developed to accommodate multiple LFA detection modes by substituting the conventional antibody control line with a hydrogel control line (HCL). As a proof of concept, the HCL performance could be associated with the slowdown and interception effect toward fluid, which are dependent on the permeation and hydrophilicity of the hydrogel with varying concentrations in the nitrocellulose membrane. This new design builds the foundation to enhance the sensitivity and develop the simplified LFA sensing platform without additional complicated processes.

A 3D sliding-strip microfluidic device for the simultaneous determination of mta

A simple paper-based microfluidic device was fabricated to simultaneously detect multiple targets. Microfluidic paper-based analytical devices (μPAD) comprise a single-layer moving sliding PAD (SPAD) to control the flow channel switch together with a folding origami PAD (OPAD) to test the target analytes. The facile assembly without any splicing materials avoids cross-contamination and non-specific adsorption of joining materials that may be caused by multi-target detection. The concentration of Fe(III), Ni(II), Cr(VI), and nitrite in standard solutions and actual aqueous solutions was successfully determined using the designed μPAD. The μPAD was able to achieve LOD of 3.3 mg/L, 1.3 mg/L, 0.35 mg/L, 0.28 mg/L for Fe (III), Ni (II), Cr (VI), and nitrite, respectively. The designed SOPAD exhibits improved stability, with a deviation of less than 7% compared to conventional analytical methods (ICP-OES and UV). Our work demonstrates that this 3D PAD holds great promise and a wide scope in environmental monitoring, biochemical analysis, food testing and other testing industries.

Lateral Flow Assay for Hepatitis B Detection: A Review of Current and New Assays

From acute to chronic hepatitis, cirrhosis, and hepatocellular cancer, hepatitis B infection causes a broad spectrum of liver diseases. Molecular and serological tests have been used to diagnose hepatitis B-related illnesses. Due to technology limitations, it is challenging to identify hepatitis B infection cases at an early stage, particularly in a low- and middle-income country with constrained resources. Generally, the gold-standard methods to detect hepatitis B virus (HBV) infection requires dedicated personnel, bulky, expensive equipment and reagents, and long processing times which delay the diagnosis of HBV. Thus, lateral flow assay (LFA), which is inexpensive, straightforward, portable, and operates reliably, has dominated point-of-care diagnostics. LFA consists of four parts: a sample pad where samples are dropped; a conjugate pad where labeled tags and biomarker components are combined; a nitrocellulose membrane with test and control lines for target DNA-probe DNA hybridization or antigen-antibody interaction; and a wicking pad where waste is stored. By modifying the pre-treatment during the sample preparation process or enhancing the signal of the biomarker probes on the membrane pad, the accuracy of the LFA for qualitative and quantitative analysis can be improved. In this review, we assembled the most recent developments in LFA technologies for the progress of hepatitis B infection detection. Prospects for ongoing development in this area are also covered.

Rapid detection of SARS-CoV-2: The gradual boom of lateral flow immunoassay

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) is still in an epidemic situation, which poses a serious threat to the safety of people and property. Rapid diagnosis and isolation of infected individuals are one of the important methods to control virus transmission. Existing lateral flow immunoassay techniques have the advantages of rapid, sensitive, and easy operation, and some new options have emerged with the continuous development of nanotechnology. Such as lateral flow immunoassay test strips based on colorimetric-fluorescent dual-mode and gold nanoparticles, Surface Enhanced Raman Scattering, etc., these technologies have played an important role in the rapid diagnosis of COVID-19. In this paper, we summarize the current research progress of lateral flow immunoassay in the field of Severe Acute Respiratory Syndrome Coronavirus 2 infection diagnosis, analyze the performance of Severe Acute Respiratory Syndrome Coronavirus 2 lateral flow immunoassay products, review the advantages and limitations of different detection methods and markers, and then explore the competitive CRISPR-based nucleic acid chromatography detection method. This method combines the advantages of gene editing and lateral flow immunoassay and can achieve rapid and highly sensitive lateral flow immunoassay detection of target nucleic acids, which is expected to be the most representative method for community and clinical point-of-care testing. We hope that researchers will be inspired by this review and strive to solve the problems in the design of highly sensitive targets, the selection of detection methods, and the enhancement of CRISPR technology, to truly achieve rapid, sensitive, convenient, and specific detection of novel coronaviruses, thus promoting the development of novel coronavirus diagnosis and contributing our modest contribution to the world's fight against epidemics.

Development of Paper Microfluidics with 3D-Printed PDMS Barriers for Flow Control

Paper microfluidics has been extensively exploited as a powerful tool for environmental and medical detection applications. Both flow delay and compatibility with either polar or non-polar reagents are indispensable for the automation of detections requiring multiple reaction steps. This article reports the systematic studies of a 3D-printing protocol, characterization, and application of both the partially and fully penetrated polydimethylsiloxane (PDMS) barriers for flexible flow control in paper microfluidics. The physical parameters of PDMS barriers printed using a simple liquid dispenser were found related to the printing pressure, speed, diffusion time after printing, baking temperature, and PDMS viscosity. The capability of PDMS barriers to confine the flow of non-polar solvents was demonstrated using oil flow in both wax- and PDMS-surrounded channels. It was identified that the minimum width of channels to prevent leakage was 470 ± 54 μm, which was as narrow as that fabricated using stamps from lithography. Both the partially penetrated barriers (PPBs) and constriction channels were of the capability to delay flow in paper microfluidics. Additionally, an in silico investigation led to the further understanding that the reduction of channel cross-section resulting from PPBs was the primary reason for flow delay. Our results suggest that increasing the penetration depth of the barriers is more efficient in delaying flow than increasing the PPB length. Finally, devices with four inlet channels and 0-6 PPBs across each channel were successfully applied in flow delay for sequential fluid delivery. These results improve the understanding of the major factors, affecting the 3D PDMS barrier fabrication and the resulting flow control in paper microfluidics, providing practical implications for applications in various fields.

Recent developments of aptamer-based lateral flow assays for point-of-care (POC) diagnostics

In the field of lateral flow assay (LFA), the application of aptamer as a bioreceptor has been implemented to overcome the limitations of antibodies, such as tedious in vivo processes, short shelf-life, and functionalization issues. To address these limitations aptamer-based LFA (ALFA) is preferred to antibody-based LFA that produces higher sensitivity and specificity. In principle, aptamers have a strong affinity towards their targets like small, large, and non-immunogenic molecules because of their high affinity, sensitivity, low dissociation constant, cost-effectiveness, and flexible nature. Thus, ALFA can be considered an efficient biosensor model for its superior portability, rapid detection with quick turnaround time, and usability by a non-technical person at any location with simple visual output. This review concisely overviews ALFA, its principles, formats, aptamer selection process, and biomedical applications. In addition, the critical components to design, develop, test, and amplify signals to create ALFA are discussed in brief. In addition, the aspects of conceptualization of ALFA product transforming from bench-side laboratory design and fabrication to commercial market are addressed in detail.

Diagnosis of disease relevant nucleic acid biomarkers with off-the-shelf devices

Changes in the level of nucleic acids in blood may be correlated with some clinical disorders like cancer, stroke, trauma and autoimmune diseases, and thus, nucleic acids can serve as potential biomarkers for pathological processes. The requirement of technical equipment and operator expertise in effective information readout of modern molecular diagnostic technologies significantly restricted application outside clinical laboratories. The ability to detect nucleic acid biomarkers with off-the-shelf devices, which have the advantages of portability, simplicity, low cost and short response time, is critical to provide a prompt clinical result in circumstances where the laboratory instruments are not available. This review throws light on the current strategies and challenges for nucleic acid diagnosis with commercial portable devices, indicating the future prospect of portable diagnostic devices and making a great difference in improving the healthcare and disease surveillance in resource-limited areas.

Microfluidics-Based Point-of-Care Testing (POCT) Devices in Dealing with Waves of COVID-19 Pandemic: The Emerging Solution

Recent advances in microfluidics-based point-of-care testing (POCT) technology such as paper, array, and beads have shown promising results for diagnosing various infectious diseases. The fast and timely detection of viral infection has proven to be a critical step for deciding the therapeutic outcome in the current COVID-19 pandemic, which in turn not only enhances the patient survival rate but also reduces the disease-associated comorbidities. In the present scenario, rapid, noninvasive detection of the virus using low cost and high throughput microfluidics-based POCT devices embraces the advantages over existing diagnostic technologies, for which a centralized lab facility, expensive instruments, sample pretreatment, and skilled personnel are required. Microfluidic-based multiplexed POCT devices can be a boon for clinical diagnosis in developing countries that lacks a centralized health care system and resources. The microfluidic devices can be used for disease diagnosis and exploited for the development and testing of drug efficacy for disease treatment in model systems. The havoc created by the second wave of COVID-19 led several countries' governments to the back front. The lack of diagnostic kits, medical devices, and human resources created a huge demand for a technology that can be remotely operated with single touch and data that can be analyzed on a phone. Recent advancements in information technology and the use of smartphones led to a paradigm shift in the development of diagnostic devices, which can be explored to deal with the current pandemic situation. This review sheds light on various approaches for the development of cost-effective microfluidics POCT devices. The successfully used microfluidic devices for COVID-19 detection under clinical settings along with their pros and cons have been discussed here. Further, the integration of microfluidic devices with smartphones and wireless network systems using the Internet-of-things will enable readers for manufacturing advanced POCT devices for remote disease management in low resource settings.

Improvement in sensitivity for lateral flow immunoassay of ferritin using novel device design based on gold-enhanced gold nanoparticles

This work introduces a low-cost adhesive tape combined with a hydroxylamine/polyvinyl alcohol/polyethylene oxide (HA/PVA/PEO) blend film to fabricate novel devices for improving sensitivity of gold nanoparticle (AuNP)-based lateral flow immunoassays (LFIAs) via two platforms: (1) LFIA device with integrated gold enhancement and (2) LFIA device with two independent sample inlets. The detection of ferritin has been used for proof-of-concept. The adhesive tape inserted in the devices assists to separate two solutions independently flowing from two different inlets toward a nitrocellulose membrane. On-device gold enhancement was achieved by the enlargement of AuNPs via the catalytic reaction of KAuCl₄ and HA using the HA/PVA/PEO blend film easily prepared via a solution-casting technique, which could delay the flow of HA released from the film for 180s and improve storage stability of the device. Under optimal conditions evaluated by naked eyes, the gold enhancement (LOD = 0.5 ng/mL) and double-sample inlet (LOD = 2 ng/mL) devices exhibited 20-fold and fivefold higher sensitivity respectively than a conventional device, verifying the sensitivity improvement. Furthermore, the proposed device was successfully detected ferritin in human serum samples within 10 min via naked-eye observation, exhibiting rapidity and simplicity of use, and the capability to perform on-site assays.

Imbibition of Liquids through a Paper Substrate in a Controlled Environment

Liquid spreading on open surfaces is a widely observed phenomenon. The physics of liquid spreading has become more complex when the surface is porous like paper or fabrics due to the evaporation of the liquid and swelling of the fibers. In this study, we have performed liquid imbibition experiments on paper strips in a controlled environment with and without using hydrophobic boundaries. The experimental results are compared to the existing analytical models that account for each effect separately. The existing models were found to be inaccurate in predicting the experimental results. We developed new analytical models by modifying existing models to predict the capillary rise of the liquid through the paper substrate accurately. Different effects, such as the barrier (hydrophobic boundary), evaporation, and swelling, are considered simultaneously while developing the modified models to mimic the exact practical situation for the first time. We discovered that the modified models predict the experimental results more accurately than the existing models. For cases with and without barriers, the final models considering several effects simultaneously predict the data with a maximum error range of 7 and 10%, respectively. Finally, we conducted capillary rise experiments with volatile (water) and non-volatile (silicon oil) liquids at various temperatures and under various relative humidity conditions to validate the analytical results.

Hydrophobic Recovery of PDMS Surfaces in Contact with Hydrophilic Entities: Relevance to Biomedical Devices

Polydimethylsiloxane (PDMS), a silicone elastomer, is increasingly being used in health and biomedical fields due to its excellent optical and mechanical properties. Its biocompatibility and resistance to biodegradation led to various applications (e.g., lung on a chip replicating blood flow, medical interventions, and diagnostics). The many advantages of PDMS are, however, partially offset by its inherent hydrophobicity, which makes it unsuitable for applications needing wetting, thus requiring the hydrophilization of its surface by exposure to UV or O2 plasma. Yet, the elastomeric state of PDMS translates in a slow, hours to days, process of reducing its surface hydrophilicity-a process denominated as hydrophobic recovery. Using Fourier transform infrared spectroscopy (FTIR) and atomic force microscopy (AFM), the present study details the dynamics of hydrophobic recovery of PDMS, on flat bare surfaces and on surfaces embedded with hydrophilic beads. It was found that a thin, stiff, hydrophilic, silica film formed on top of the PDMS material, following its hydrophilization by UV radiation. The hydrophobic recovery of bare PDMS material is the result of an overlap of various nano-mechanical, and diffusional processes, each with its own dynamics rate, which were analyzed in parallel. The hydrophobic recovery presents a hysteresis, with surface hydrophobicity recovering only partially due to a thin, but resilient top silica layer. The monitoring of hydrophobic recovery of PDMS embedded with hydrophilic beads revealed that this is delayed, and then totally stalled in the few-micrometer vicinity of the embedded hydrophilic beads. This region where the hydrophobic recovery stalls can be used as a good approximation of the depth of the resilient, moderately hydrophilic top layer on the PDMS material. The complex processes of hydrophilization and subsequent hydrophobic recovery impact the design, fabrication, and operation of PDMS materials and devices used for diagnostics and medical procedures. Consequently, especially considering the emergence of new surgical procedures using elastomers, the impact of hydrophobic recovery on the surface of PDMS warrants more comprehensive studies.

Ball pen writing-without-ink: a truly simple and accessible method for sensitivity enhancement in lateral flow assays

Lateral flow assays (LFAs), a popular point-of-care testing platform, have found widespread applications from laboratory to clinics. However, LFA-based testing is still subject to limited detection sensitivity, especially for classical gold nanoparticle-based LFAs. Inspired by traditional pen-based writing technologies, we developed a ball pen writing-without-ink method to amplify the detection signal of LFAs through controlling fluid flow rate. An enhancement of detection sensitivity by two times was obtained. Since the underlying mechanism of this method to improve detection sensitivity is to control the flow rate of the liquid on paper, it may be suitable for most paper-based platforms.

Visible-light and near-infrared fluorescence and surface-enhanced Raman scattering point-of-care sensing and bio-imaging: a review

This review article deals with the concepts, principles and applications of visible-light and near-infrared (NIR) fluorescence and surface-enhanced Raman scattering (SERS) in in vitro point-of-care testing (POCT) and in vivo bio-imaging. It has discussed how to utilize the biological transparency windows to improve the penetration depth and signal-to-noise ratio, and how to use surface plasmon resonance (SPR) to amplify fluorescence and SERS signals. This article has highlighted some plasmonic fluorescence and SERS probes. It has also reviewed the design strategies of fluorescent and SERS sensors in the detection of metal ions, small molecules, proteins and nucleic acids. Particularly, it has provided perspectives on the integration of fluorescent and SERS sensors into microfluidic chips as lab-on-chips to realize point-of-care testing. It has also discussed the design of active microfluidic devices and non-paper- or paper-based lateral flow assays for in vitro diagnostics. In addition, this article has discussed the strategies to design in vivo NIR fluorescence and SERS bio-imaging platforms for monitoring physiological processes and disease progression in live cells and tissues. Moreover, it has highlighted the applications of POCT and bio-imaging in testing toxins, heavy metals, illicit drugs, cancers, traumatic brain injuries, and infectious diseases such as COVID-19, influenza, HIV and sepsis.

Gold nanoparticles in virus detection: Recent advances and potential considerations for SARS-CoV-2 testing development

Viruses are infectious agents that pose significant threats to plants, animals, and humans. The current coronavirus disease 2019 pandemic, which is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has spread globally and resulted in over 2 million deaths and immeasurable financial losses. Rapid and sensitive virus diagnostics become crucially important in controlling the spread of a pandemic before effective treatment and vaccines are available. Gold nanoparticle (AuNP)-based testing holds great potential for this urgent unmet biomedical need. In this review, we describe the most recent advances in AuNP-based viral detection applications. In addition, we discuss considerations for the design of AuNP-based SARS-CoV-2 testings. Finally, we highlight and propose important parameters to consider for the future development of effective AuNP-based testings that would be critical for not only this COVID-19 pandemic, but also potential future outbreaks. This article is categorized under: Diagnostic Tools > Biosensing Diagnostic Tools > In Vitro Nanoparticle-Based Sensing.

Amplification-free smartphone-based attomolar HBV detection

Classical gold standard HBV detection relies on expensive devices and complicated procedures, thus is always restricted in large-scale hospitals and centers for disease control and prevention. To extend HBV detection to primary clinics especially in underdeveloped areas, we design amplification-free smartphone-based attomolar HBV detecting technique based on single molecule sensing. Verified by synthesized HBV target DNA, this technique reaches a detection limit at attomolar concentration (100 aM); and verified by 110 clinical samples, it also reaches a rather high sensitivity of 10⁴ copy/mL (≈2000 IU/mL) with a high accuracy of 93.64% certificated by gold standard HBV detecting devices. Besides, this technique can quantify HBV viral load in 70 min only using portable and inexpensive devices as well as simple operations. Because of its cost-effective, field-portable and operable design, highly sensitive and selective detecting capability and wireless data connectivity, this technique can be potentially used in mobile HBV diagnoses and share HBV epidemic information especially in resource limited situations.

Recent advances and challenges of biosensing in point-of-care molecular diagnosis

Molecular diagnosis, which plays a major role in infectious disease screening with successful understanding of the human genome, has attracted more attention because of the outbreak of COVID-19 recently. Since point-of-care testing (POCT) can expand the application of molecular diagnosis with the benefit of rapid reply, low cost, and working in decentralized environments, many researchers and commercial institutions have dedicated tremendous effort and enthusiasm to POCT-based biosensing for molecular diagnosis. In this review, we firstly summarize the state-of-the-art techniques and the construction of biosensing systems for POC molecular diagnosis. Then, the application scenarios of POCT-based biosensing for molecular diagnosis were also reviewed. Finally, several challenges and perspectives of POC biosensing for molecular diagnosis are discussed. This review is expected to help researchers deepen comprehension and make progresses in POCT-based biosensing field for molecular diagnosis applications.

Lateral flow assays (LFA) as an alternative medical diagnosis method for detection of virus species: The intertwine of nanotechnology with sensing strategies

Viruses are responsible for multiple infections in humans that impose huge health burdens on individuals and populations worldwide. Therefore, numerous diagnostic methods and strategies have been developed for prevention, management, and decreasing the burden of viral diseases, each having its advantages and limitations. Viral infections are commonly detected using serological and nucleic acid-based methods. However, these conventional and clinical approaches have some limitations that can be resolved by implementing other detector devices. Therefore, the search for sensitive, selective, portable, and costless approaches as efficient alternative clinical methods for point of care testing (POCT) analysis has gained much attention in recent years. POCT is one of the ultimate goals in virus detection, and thus, the tests need to be rapid, specific, sensitive, accessible, and user-friendly. In this review, after a brief overview of viruses and their characteristics, the conventional viral detection methods, the clinical approaches, and their advantages and shortcomings are firstly explained. Then, LFA systems working principles, benefits, classification are discussed. Furthermore, the studies regarding designing and employing LFAs in diagnosing different types of viruses, especially SARS-CoV-2 as a main concern worldwide and innovations in the LFAs' approaches and designs, are comprehensively discussed here. Furthermore, several strategies addressed in some studies for overcoming LFA limitations like low sensitivity are reviewed. Numerous techniques are adopted to increase sensitivity and perform quantitative detection. Employing several visualization methods, using different labeling reporters, integrating LFAs with other detection methods to benefit from both LFA and the integrated detection device advantages, and designing unique membranes to increase reagent reactivity, are some of the approaches that are highlighted.

Micro and Nanoscale Technologies for Diagnosis of Viral Infections

Viral infection is one of the leading causes of mortality worldwide. The growth of globalization significantly increases the risk of virus spreading, making it a global threat to future public health. In particular, the ongoing coronavirus disease 2019 (COVID-19) pandemic outbreak emphasizes the importance of devices and methods for rapid, sensitive, and cost-effective diagnosis of viral infections in the early stages by which their quick and global spread can be controlled. Micro and nanoscale technologies have attracted tremendous attention in recent years for a variety of medical and biological applications, especially in developing diagnostic platforms for rapid and accurate detection of viral diseases. This review addresses advances of microneedles, microchip-based integrated platforms, and nano- and microparticles for sampling, sample processing, enrichment, amplification, and detection of viral particles and antigens related to the diagnosis of viral diseases. Additionally, methods for the fabrication of microchip-based devices and commercially used devices are described. Finally, challenges and prospects on the development of micro and nanotechnologies for the early diagnosis of viral diseases are highlighted.

Modification of a nitrocellulose membrane with nanofibers for sensitivity enhancement in lateral flow test strips

Lateral-flow analysis (LFA) is a convenient, low-cost, and rapid detection method, which has been widely used for screening of diseases. However, sensitivity enhancement in LFA is still a focus in this field and remains challenging. Herein, we propose an electrospinning coating method to modify the conventional nitrocellulose (NC) membrane and optimize the liquid flow rate for enhancing the sensitivity of the NC based LFA strips in the detection of human chorionic gonadotropin (HCG) and luteinizing hormone (LH). It can be seen that coating the NC membrane with nitrocellulose fibers could obtain a NC based strip with HCG and LH detection limits of 0.22 and 0.36 mIU mL-1 respectively, and a quantitative linear range of 0.5-500 mIU mL-1. The results show that electrospinning is effective in modifying conventional NC membranes for LFA applications.

Nanocellulose aerogel inserts for quantitative lateral flow immunoassays

The Lateral Flow Immuno Assay (LFIA) is a well-established technique that provides immediate results without high-cost laboratory equipment and technical skills from the users. However, conventional colorimetric LFIA strips suffer from high limits of detection, mainly due to the analysis of a limited sample volume, short reaction time between the target analyte and the conjugation molecules, and a weak optical signal. Thus, LFIAs are mainly employed as a medical diagnostic tool for qualitative and semi/quantitative detection, respectively. We applied a novel cellulose nanofiber (CNF) aerogel material incorporated into LFIA strips to increase the sample flow time, which in turn extends the binding interactions between the analyte of interest and the detection antibody, thus improving the limit of detection (LOD). Compared to a conventional LFIA strip, the longer sample flow time in the aerogel modified LFIA strips improved the LOD for the detection of mouse IgG in a buffer solution by a 1000-fold. The accomplished LOD (0.01 ng/mL) even outperformed specifications of a commercial ELISA kit by a factor of 10, and the CNF aerogel assisted LFIA was successfully applied to detect IgG in human serum with a LOD of 0.72 ng/mL. Next to the improved LOD, the aerogel assisted LFIA could quantify IgG samples in buffer and human serum in the concentration ranges of 0.17 ng/mL - 100 ng/mL (in buffer) and 4.6 ng/mL - 100 ng/mL (in human serum). The presented solution thus poses a unique potential to transform lateral flow assays into highly sensitive, fully quantitative point-of-care diagnostics.

Dissolvable sugar barriers to enhance the sensitivity of nitrocellulose membrane lateral flow assay for COVID-19 nucleic acid

Nitrocellulose (NC) membrane can have value-added applications for lateral flow assay (LFA)-based diagnostic tools, which has great potential for the detection of pathogens, such as COVID-19, in different environments. However, poor sensitivity of the NC membrane based LFA limits its further application in many cases. Herein, we developed a facile method for LFA sensitivity enhancement, by incorporating two-sugar barrier into LFAs: one between the conjugation pad and the test line, and the other between the test line and the control line. ORF1ab nucleic acid of COVID-19 was used as the model target to demonstrate the concept on the HF120 membrane. Results show that at optimum conditions, the two sugar barrier LFAs have a detection limit of 0.5 nM, which is compared to that of 2.5 nM for the control LFA, achieving a 5-fold sensitivity increase. This low cost, easy-to-fabricate and easy-to-integrate LFA method may have potential applications in other cellulose paper-based platforms.

Advanced Signal-Amplification Strategies for Paper-Based Analytical Devices: A Comprehensive Review

Paper-based analytical devices (PADs) have emerged as a promising approach to point-of-care (POC) detection applications in biomedical and clinical diagnosis owing to their advantages, including cost-effectiveness, ease of use, and rapid responses as well as for being equipment-free, disposable, and user-friendly. However, the overall sensitivity of PADs still remains weak, posing a challenge for biosensing scientists exploiting them in clinical applications. This review comprehensively summarizes the current applicable potential of PADs, focusing on total signal-amplification strategies that have been applied widely in PADs involving colorimetry, luminescence, surface-enhanced Raman scattering, photoacoustic, photothermal, and photoelectrochemical methods as well as nucleic acid-mediated PAD modifications. The advances in signal-amplification strategies in terms of signal-enhancing principles, sensitivity, and time reactions are discussed in detail to provide an overview of these approaches to using PADs in biosensing applications. Furthermore, a comparison of these methods summarizes the potential for scientists to develop superior PADs. This review serves as a useful inside look at the current progress and prospective directions in using PADs for clinical diagnostics and provides a better source of reference for further investigations, as well as innovations, in the POC diagnostics field.

Paper-Based Biosensors: Frontiers in Point-of-Care Detection of COVID-19 Disease

This review summarizes the state of the art of paper-based biosensors (PBBs) for coronavirus disease 2019 (COVID-19) detection. Three categories of PBB are currently being been used for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) diagnostics, namely for viral gene, viral antigen and antibody detection. The characteristics, the analytical performance, the advantages and drawbacks of each type of biosensor are highlighted and compared with traditional methods. It is hoped that this review will be useful for scientists for the development of novel PBB platforms with enhanced performance for helping to contain the COVID-19 outbreak, by allowing early diagnosis at the point of care (POC).

Dip-Type Paper-Based Analytical Device for Straightforward Quantitative Detection without Precise Sample Introduction

The development of low-cost, user-friendly paper-based analytical devices (PADs) that can easily measure target chemicals is attracting attention. However, most PADs require manipulation of the sample using sophisticated micropipettes for quantitative analyses, which restricts their user-friendliness. In addition, immobilization of detection molecules to cellulose fibers is essential for achieving good measuring ability as it ensures the homogeneity of color development. Here, we have described a dip-type PAD that does not require pipette manipulation for sample introduction and immobilization of detection molecules to cellulose fibers and its application to ascorbic acid (AA) and pH assays. The PAD consisted of a dipping area and two channels, each with two detection zones. The developed PADs show color distribution in the two detection zones depending on the sample flow from the dipping area. In comparison with a PAD that has one detection zone at the end of the channel, our developed device achieved higher sensitivity (limit of detection (LOD), 0.22 mg/mL) and reproducibility (maximum coefficient of variation (CV), 2.4%) in AA detection. However, in pH detection, the reproducibility of the PAD with one detection zone at the end of the channel (maximum CV, 21%) was worse than that with two zones (maximum CV, 11%). Furthermore, a dipping time over 3 s did not affect color formation or calibration curves in AA detection: LODs at 3 and 30 s dipping time were 18 and 5.8 μg/mL, respectively. The simultaneous determination of AA and pH in various beverages was performed with no significant difference compared to results of the conventional method.

Recent Advances of Hepatitis B Detection towards Paper-Based Analytical Devices

Hepatitis B virus (HBV) still remains a major global public health problem. One-half to one-third of the total HBV infected people died due to late detection of HBV. Serological antigen and viral HBV detections can help in the diagnosis, referral, and treatment of HBV. Available methods for HBV detection mostly used bulky instruments. Miniaturization of devices for HBV detection has been started by narrowing down the size of the devices. Several methods have also been proposed to increase the selectivity and sensitivity of the miniaturized methods, such as sandwich recognition of the biomarkers and the use of nano- to micro-sized materials. This review presents recent HBV detections in the last two decades from laboratory-based instruments towards microfluidic paper-based analytical devices (µPADs) for point-of-care testing (POCT) purposes. Early and routine analysis to detect HBV as early as possible could be achieved by POCT, especially for areas with limited access to a central laboratory and/or medical facilities.

Periodically programmed building and collapse of DNA networks enables an ultrahigh signal amplification effect for ultrasensitive nucleic acids analysis

ANALYSIS

of molecular species is needed for applications in diagnosis of infections and genetic diseases. Herein, we demonstrate a target DNA-responsive ultrahigh fluorescence signal-on DNA amplification system via periodically programmed building and collapse of DNA networks. In this system, a pair of oligonucleotides of padlock probe (PP) and palindromic hairpin probe (PHP) are utilized. The presence of target DNA firstly hybridizes with PP, allowing the occurrence of rolling circle amplification (RCA) to produce RCA products with tandem repeats in abundance to bind and unfold numbers of PHPs. The conformational change of PHPs enables the building of DNA networks via the intermolecular palindrome pairing, but then makes the DNA networks collapsed via the palindrome-induced strand displacement polymerization. The displaced RCA products are dynamically reused to undergo periodically programmed multiple rounds of DNA network building and collapse. Depend on the bidirectional DNA assembly and disassembly, a strikingly amplified fluorescence can be collected to ultrasensitive and specific detection of target DNA. The practicability has been demonstrated by evaluating target-spiked human serum, saliva, and urine samples with acceptable recoveries and reproducibility. Therefore, this newly explored method opens a promising avenue for the detection of nucleic acids with low abundance in biochemical analysis and diseases diagnosis.

Monitoring hepatitis B by using point-of-care testing: biomarkers, current technologies, and perspectives

Introduction: Liver diseases caused by hepatitis B virus (HBV) are pandemic infectious diseases that seriously endanger human health, conventional diagnosis methods can not meet the requirements in resource-limited areas. The point of acre detection methods can easily resolve those problems. Herein, we review the most recent advances in POC-based hepatitis B detection methods and present some recommendations for future development. It aims to provide ideas for future research.Areas covered: Epidemiological data on Hepatitis B, conventional diagnostic methods for hepatitis B detection, some latest point of care detection methods for hepatitis B detection and list out the recommendations for future development.Expert opinion: This manuscript summarized traditional biomarkers of different hepatitis B stages and recent-developed POCT platforms (including microfluidic platforms and lateral-flow strips) and discuss the challenges associated with their use. Some emerging biomarkers that can be used in hepatitis B diagnosis are also listed. This manuscript has certain guiding significance to the development of hepatitis B detection.

Recent advances in sensitivity enhancement for lateral flow assay

Conventional lateral flow assay (LFA) is typically performed by observing the color changes in the test lines by naked eyes, which achieves considerable commercial success and has a significant impact on the fields of food safety, environment monitoring, disease diagnosis, and other applications. However, this qualitative detection method is not very suitable for low levels of disease biomarkers' detection. Although many nanomaterials are used as new labels for LFA, additional readers limit their application to some extent. Fortunately, a lot of work has been done for improving the sensitivity of LFA. In this review, currently reported LFA sensitivity enhancement methods with an objective evaluation are summarized, such as sample pretreatment, the change of flow rate, and label evolution, and future development direction and challenges of LFAs are discussed.

Improving the sensitivity of cellulose fiber-based lateral flow assay by incorporating a water-dissolvable polyvinyl alcohol dam

Lateral flow assay (LFA) is an important point-of-care (POC) test platform due to the associated portability, on-site testing, and low cost for diagnosis of pathogen infections and disease biomarkers. However, compared to high-end analyzers in hospitals, LFA devices, in particular, paper- based LFA tests, fall short in accuracy. This study focuses on two ways to improve LFAs: (1) using cellulose fibers, rather than glass fibers for a sample pad, and (2) incorporating a one-step simple, facile, and low cost PVA dam into the LFA. Both strategies (cellulose fiber as a sample pad and water dissolvable PVA dam) contributed to delaying the controlled biomolecule's flow through the nitrocellulose membrane's capillary channels resulting in increased bio-recognition time, thus contributing to the enhancement of LFA sensitivity. PVA modified cellulose fiber-based LFA demonstrated 10 times higher sensitivity than the cellulose fiber-based unmodified LFA, whereas 2 times enhancement was obtained in the cellulose fiber-based sample pad LFA compared to the glass fiber-based sample pad LFA. Ultimately, 20 times increase in sensitivity was achieved in the modified LFA device. This study shows that PVA and eco-friendly cellulose fibers could be incorporated into other paper based POC testing devices for future development.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10570-021-04083-3.

Emerging point-of-care biosensors for rapid diagnosis of COVID-19: current progress, challenges, and future prospects

Coronavirus disease 2019 (COVID-19) pandemic is currently a serious global health threat. While conventional laboratory tests such as quantitative real-time polymerase chain reaction (qPCR), serology tests, and chest computerized tomography (CT) scan allow diagnosis of COVID-19, these tests are time-consuming and laborious, and are limited in resource-limited settings or developing countries. Point-of-care (POC) biosensors such as chip-based and paper-based biosensors are typically rapid, portable, cost-effective, and user-friendly, which can be used for COVID-19 in remote settings. The escalating demand for rapid diagnosis of COVID-19 presents a strong need for a timely and comprehensive review on the POC biosensors for COVID-19 that meet ASSURED criteria: Affordable, Sensitive, Specific, User-friendly, Rapid and Robust, Equipment-free, and Deliverable to end users. In the present review, we discuss the importance of rapid and early diagnosis of COVID-19 and pathogenesis of COVID-19 along with the key diagnostic biomarkers. We critically review the most recent advances in POC biosensors which show great promise for the detection of COVID-19 based on three main categories: chip-based biosensors, paper-based biosensors, and other biosensors. We subsequently discuss the key benefits of these biosensors and their use for the detection of antigen, antibody, and viral nucleic acids. The commercial POC biosensors for COVID-19 are critically compared. Finally, we discuss the key challenges and future perspectives of developing emerging POC biosensors for COVID-19. This review would be very useful for guiding strategies for developing and commercializing rapid POC tests to manage the spread of infections.Graphical abstract.

Target-induced molecular-switch on triple-helix DNA-functionalized carbon nanotubes for simultaneous visual detection of nucleic acids and proteins

We report an easy and efficient approach based on a target-induced molecular-switch on triple-helix DNA (THD)-functionalized carbon nanotubes (CNTs) for the simultaneous visual detection of nucleic acids and proteins with a lateral flow nucleic acid biosensor. The assay had the capability to detect a minimum of 25 pM target DNA and 0.25 nM thrombin simultaneously within 20 min.

Paper/Soluble Polymer Hybrid-Based Lateral Flow Biosensing Platform for High-Performance Point-of-Care Testing

As a global shift continues to occur in high burden diseases toward developing countries, the importance of medical diagnostics based on point-of-care testing (POCT) is rapidly increasing. However, most diagnostic tests that meet clinical standards rely on high-end analyzers in central hospitals. Here, we report the development of a simple, low-cost, mass-producible, highly sensitive/quantitative, automated, and robust paper/soluble polymer hybrid-based lateral flow biosensing platform, paired with a smartphone-based reader, for high-performance POCT. The testing architecture incorporates a polymeric barrier that programs/automates sequential reactions via a polymer dissolving mechanism. The smartphone-based reader with simple opto-mechanical parts offers a stable framework for accurate quantification. Analytical performance of this platform was evaluated by testing human cardiac troponin I (cTnI), a preferred biomarker for the diagnosis of myocardial infarction, in serum/plasma samples. Coupled with catalytic/colorimetric gold-ion amplification, this platform produced results within 20 min with a detection limit of 0.92 pg mL^-1 and a coefficient of variation <10%, which is equivalent to the performance of a high-sensitivity standard analyzer, and operated within acceptable levels stipulated by clinical guidelines. Moreover, cTnI clinical sample tests indicate a high correlation (r = 0.981) with the contemporary analyzers, demonstrating the clinical utility of this platform in high-performance POCT.

Development of Point-of-Care Biosensors for COVID-19

Coronavirus disease 2019 (COVID-19) outbreak has become a global pandemic. The deleterious effects of coronavirus have prompted the development of diagnostic tools to manage the spread of disease. While conventional technologies such as quantitative real time polymerase chain reaction (qRT-PCR) have been broadly used to detect COVID-19, they are time-consuming, labor-intensive and are unavailable in remote settings. Point-of-care (POC) biosensors, including chip-based and paper-based biosensors are typically low-cost and user-friendly, which offer tremendous potential for rapid medical diagnosis. This mini review article discusses the recent advances in POC biosensors for COVID-19. First, the development of POC biosensors which are made of polydimethylsiloxane (PDMS), papers, and other flexible materials such as textile, film, and carbon nanosheets are reviewed. The advantages of each biosensors along with the commercially available COVID-19 biosensors are highlighted. Lastly, the existing challenges and future perspectives of developing robust POC biosensors to rapidly identify and manage the spread of COVID-19 are briefly discussed.

Quantitatively controllable fluid flows with ballpoint-pen-printed patterns for programmable photo-paper-based microfluidic devices

Regulating the fluid flow in microfluidic devices enables a wide range of assay protocols for analytical applications. A programmable, photo-paper-based microfluidic device fabricated by using a method of cutting and laminating, followed by printing, is reported. The flow distance of fluid in the photo-paper-based channel was linearly proportional to time. By printing silver nanoparticle (AgNP) and poly[4,5-difluoro-2,2-bis(trifluoromethyl)-1,3-dioxole-co-tetrafluoroethylene] (PTFE) patterns on the surface of a photo-paper-based channel, we were able to either increase or decrease the fluid flow in the fabricated microfluidic devices, while maintaining the linearity in the flow distance-time relation. In comparison to the speed of fluid flow in a pristine channel, by using hydrophilic AgNP patterns, we were able to increase the speed in the channel by up to 15 times while we were able to slow the speed by a factor of 3 when using hydrophobic PTFE dots. We then further demonstrated a single-step protocol for detecting glucose and a multi-step protocol for detecting methyl paraoxon (MPO) with our methods in photo-paper-based microfluidic devices. This approach can lead to improved fluid handling techniques to achieve a wide range of complex, but programmable, assays without the need for any additional auxiliary devices for automated operation.

Lateral flow biosensors based on the use of micro- and nanomaterials: a review on recent developments

This review (with 187 refs.) summarizes the progress that has been made in the design of lateral flow biosensors (LFBs) based on the use of micro- and nano-materials. Following a short introduction into the field, a first section covers features related to the design of LFBs, with subsections on strip-based, cotton thread-based and vertical flow- and syringe-based LFBs. The next chapter summarizes methods for sample pretreatment, from simple method to membrane-based methods, pretreatment by magnetic methods to device-integrated sample preparation. Advances in flow control are treated next, with subsections on cross-flow strategies, delayed and controlled release and various other strategies. Detection conditionst and mathematical modelling are briefly introduced in the following chapter. A further chapter covers methods for reliability improvement, for example by adding other validation lines or adopting different detection methods. Signal readouts are summarized next, with subsections on color-based, luminescent, smartphone-based and SERS-based methods. A concluding section summarizes the current status and addresses challenges in future perspectives. Graphical abstractRecent development and breakthrough points of lateral flow biosensors.

Calorimetric lateral flow immunoassay detection platform based on the photothermal effect of gold nanocages with high sensitivity, specificity, and accuracy

BACKGROUND

Lateral flow assays (LFA) play an increasingly important role in the rapid detection of various pathogens, pollutants, and toxins.

PURPOSE

To overcome the drawbacks of low sensitivity and poor quantification in LFA, we developed a new calorimetric LFA (CLFA) using gold nanocages (GNCs) due to their high photothermal conversion efficiency, good stability of photophysical properties, and stronger penetrating ability of NIR light.

METHODS

Thiol-polyethylene glycol-succinyl imide ester (HS-PEG-NHS) was modified onto GNCs, and the complex was conjugated with an antibody. Subsequently, the antibody-conjugated GNCs were analyzed by UV/Vis spectrophotometer, transmission electron microscope, high-resolution transmission electron microscope with energy dispersive spectrometer, dynamic light scattering instrument, and Atom force microscope. The GNC-based CLFA of alpha-fetoprotein (AFP) and zearalenone (ZEN), a food toxin, required nitrocellulose strips, a NIR laser source, and an infrared camera.

RESULTS

The GNC-labeled CLFA platform technique exhibited detection sensitivity, qualitative specificity, and quantitative accuracy. The superior performance of the technique was evident both in sandwich format detection of biomacromolecules (eg, AFP protein) or competitive format detection of small molecules (eg, ZEN). After optimizing various test parameters, GNC-labeled CLFA provided ca. 5-6-fold enhanced sensitivity, higher correlativity (R 2>0.99), and more favorable recovery (82-115%) when compared with visual LFA.

CONCLUSION

GNC-labeled CLFA may be a promising detection platform with high sensitivity, specificity, and precision.

Integrated microfluidic systems with sample preparation and nucleic acid amplification

Rapid, efficient and accurate nucleic acid molecule detection is important in the screening of diseases and pathogens, yet remains a limiting factor at point of care (POC) treatment. Microfluidic systems are characterized by fast, integrated, miniaturized features which provide an effective platform for qualitative and quantitative detection of nucleic acid molecules. The nucleic acid detection process mainly includes sample preparation and target molecule amplification. Given the advancements in theoretical research and technological innovations to date, nucleic acid extraction and amplification integrated with microfluidic systems has advanced rapidly. The primary goal of this review is to outline current approaches used for nucleic acid detection in the context of microfluidic systems. The secondary goal is to identify new approaches that will help shape future trends at the intersection of nucleic acid detection and microfluidics, particularly with regard to increasing disease and pathogen detection for improved diagnosis and treatment.

Programmable Paper-Based Microfluidic Devices for Biomarker Detections

Recent advanced paper-based microfluidic devices provide an alternative technology for the detection of biomarkers by using affordable and portable devices for point-of-care testing (POCT). Programmable paper-based microfluidic devices enable a wide range of biomarker detection with high sensitivity and automation for single- and multi-step assays because they provide better control for manipulating fluid samples. In this review, we examine the advances in programmable microfluidics, i.e., paper-based continuous-flow microfluidic (p-CMF) devices and paper-based digital microfluidic (p-DMF) devices, for biomarker detection. First, we discuss the methods used to fabricate these two types of paper-based microfluidic devices and the strategies for programming fluid delivery and for droplet manipulation. Next, we discuss the use of these programmable paper-based devices for the single- and multi-step detection of biomarkers. Finally, we present the current limitations of paper-based microfluidics for biomarker detection and the outlook for their development.

Colorimetric Detection of DNA Strands on Cellulose Microparticles Using ZZ-CBM Fusions and Gold Nanoparticles

Nucleic acid testing requires skilled personnel and expensive instrumentation. A method for the colorimetric detection of oligonucleotides that combines cellulose microparticles with biomolecular recognition is presented. DNA sequences from Trypanosoma brucei and dengue are used as model targets. Cellulose microparticles (≈20 µm) are bioactived by anchoring anti-biotin antibodies via fusions that combine a carbohydrate-binding module (CBM) with the ZZ fragment of protein A. Samples are prepared by incubating DNA probes immobilized on ≈14 nm gold nanoparticles (AuNPs) with biotin-labeled targets and mixed with bioactive microparticles. The presence of unlabeled targets could also be probed by introducing a second, biotinylated DNA probe. The target:probe-AuNP hybrids are mixed with and captured by the microparticles, which change color from white to red. Depletion of AuNPs from the liquid is also signaled by a decrease in absorbance at 525 nm. It was possible to detect targets with concentrations as low as 50 n m. In the presence of noncomplementary targets, microparticles remain white and the liquid remains red. The system is able to discriminate targets with a high degree of homology (≈53%). Overall, it is demonstrated that simple systems for the visual detection of nucleic acids can be set up by combining cellulose microparticles with biomolecular recognition agents based on CBMs and AuNPs.

Sensitivity Enhancement of Nucleic Acid Lateral Flow Assays through a Physical-Chemical Coupling Method: Dissoluble Saline Barriers

Nucleic acid lateral flow assays (NALFAs) have attracted much attention due to their rapid, robust, simple, and cost-effective features. However, the current NALFAs are still limited by low sensitivity because of the poor understanding and control of the underlying complex flow and reaction processes. Although enormous efforts have been devoted to enhancing detection sensitivity of NALFAs, developing simple NALFAs with high sensitivity remains difficult. Thus, we proposed a novel physical-chemical coupling method using dissoluble saline barriers and developed the corresponding mathematical model to better understand the underlying processes to enhance the NALFA sensitivity. Through optimizing the design parameters (e.g., saline barriers patterns, volume, and concentrations) experimentally and numerically, we achieved the highest 10-fold sensitivity enhancement for detection of nucleic acids (including HBV, Staphylococcus aureus, and salmonella as model targets) using this method. The physical-chemical coupling method offers a facile strategy for developing highly sensitive NALFAs.