Sample Preparation for Bioanalytical and Pharmaceutical Analysis

Hyphenated Centrifugal Microsolid Phase Extraction and Centrifugal Acceleration Thin-Layer Chromatography in a Single Device: An Innovative Approach to Perform Consecutive Extraction and Separation

An innovative approach for extracting and separating analytes consecutively from complex matrixes was introduced for the first time. The approach involves applying centrifugal force to a novel circular chip to expedite the process of microsolid phase extraction and centrifugal acceleration thin-layer chromatography, followed by red-green-blue (RGB) analysis as a simple, fast, and in situ detection method. Furthermore, the natural product of rice husk was utilized to create a sorbent with great adsorption capabilities. In this method, curcumin and phenazopyridine were employed as model drugs. The one-variable-at-a-time (OVAT) method was used to study the factors that affect the extraction and separation. Under the optimized conditions, a good relationship was observed between the |R| + |B| intensity and the concentration of analytes within the range of 1.0-10.0 μg/mL (R2 = 0.9903) for curcumin and 0.1-7.5 μg/mL (R2 = 0.9933) for phenazopyridine in urine samples. Intra- and interday RSDs% (n = 3) were obtained at less than 5.6 and 7.1%, respectively. In urine samples, the limit of detection values was 0.75 μg/mL for curcumin and 0.05 μg/mL for phenazopyridine, and relative recovery values were in the acceptable range of 85.0-100.2%. The suggested approach has the appropriate sensitivity, good accuracy, and acceptable applicability to determine curcumin and phenazopyridine in complicated matrices.

Establishment of a Quantitative Method for the Extraction of Nicotine and Cotinine in Gingival Tissue and Relationship Between Gingival Intoxication With Conventional Smoking Biomarkers: A Pilot Study

OBJECTIVES

Smoking is considered a major risk factor for periodontitis genesis and progression. In clinical studies, specific indicators have been used to characterize the smoking status of the patient as the number of cigarettes consumed (NCC), the pack-years (PY), or Fagerström Test for Nicotine Dependence (FTND). However, available literature is missing on the relationship between cotinine gingival intoxication and smoking indicators. First, the development of a quantitative method for the extraction of nicotine and cotinine in gingival tissue. Second, to investigate the relationship between gingival intoxication and conventional smoking biomarkers.

MATERIAL AND METHODS

Fourteen smoker patients were included in the study. After clinical data collection, salivary and gingival samples collection, toxicological analyses were performed using liquid extraction after enzymatic digestion (subtilisin) and ultra-performance liquid chromatography coupled to mass spectrometry (UPLC-MS/MS).

RESULTS

Gingival cotinine quantification was successfully performed in 14 samples (100%) with a mean of 0.280 ng/mg (range = 0.094-0.505). Only FTND was statistically associated with gingival cotinine levels (p = 0.0072; r² = 0.60). Gingival nicotine quantification was achieved in 12 of the 14 gingival samples (86%) with a mean of 0.384 ± 1.00 ng/mg (range = 0.03-3.84). Gingival nicotine was statistically associated with NCC (p = 0.032; r² = 0.55), PY (p = 0.0011; r² = 0.76), and FTND (p = 0.016; r² = 0.60). Salivary nicotine and cotinine levels were statistically associated with, respectively, NCC (p = 0.030; r² = 0.34), and NCC (p = 0.0094; r² = 0.63) + PY (p = 0.0078; r² = 0.64).

CONCLUSIONS

This pilot study established a quantitative extraction method for nicotine and cotinine from human gingival samples. Additionally, FTND was associated with gingival cotinine. However, further large-scale studies are needed to confirm the relationship between nicotine dependence and gingival intoxication.

Current green capillary electrophoresis and liquid chromatography methods for analysis of pharmaceutical and biomedical samples (2019-2023) - A review

Separation analytical methods, including liquid chromatography (LC) and capillary electrophoresis (CE), in combination with an appropriate detection technique, are dominant and powerful approaches preferred in the analysis of pharmaceutical and biomedical samples. Recent trends in analytical methods are focused on activities that push them to the field of greenness and sustainability. New approaches based on the implementation of greener solvents, non-hazardous chemicals, and reagents have grown exponentially. Similarly, recent trends are pushed in to the strategies based on miniaturization, reduction of wastes, avoiding derivatization procedures, or reduction of energy consumption. However, the real greenness of the analytical method can be evaluated only according to an objective and sufficient metric offering complex results taking into account all twelve rules of green analytical chemistry (SIGNIFICANCE mnemonic system). This review provides an extensive overview of papers published in the area of development of green LC and CE methods in the field of pharmaceutical and biomedical analysis over the last 5 years (2019-2023). The main focus is situated on the metrics used for greenness evaluation of the methods applied for the determination of bioactive agents. It critically evaluates and compares the demands of the real applicability of the methods in quality control and clinical environment with the requirements of the green analytical chemistry (GAC). Greenness and practicality of the summarized methods are re-evaluated or newly evaluated with the use of the dominant metrics tools, i.e., Analytical GREEnness (AGREE), Green Analytical Procedure Index (GAPI), Blue Applicability Grade Index (BAGI), and Sample Preparation Metric of Sustainability (SPMS). Moreover, general conclusions and future perspectives of the greening procedures and greenness evaluation metrics systems are presented. This paper should provide comprehensive information to analytical chemists, biochemists, and it can also represent a valuable source of information for clinicians, biomedical or quality control laboratories interested in development of analytical methods based on greenness, practicality, and sustainability.

Purification and characterization of betacyanin monomers from Hylocereus polyrhizus peel: A comparative study of their antioxidant and antidiabetic activities with mechanistic insights

Betacyanins have garnered escalating research interest for their promising bioactivities. However, substantial challenges in purification and separation have impeded a holistic comprehension of the distinct bioactivities of individual betacyanins and their underlying mechanisms. Herein, betanin and phyllocactin monomers with purity exceeding 95% were successfully obtained from Hylocereus polyrhizus peel using a feasible protocol. These monomers were subsequently employed for comparative bioactivity assessments to uncover underlying mechanisms and illuminate structure-activity relationships. Interestingly, phyllocactin exhibited superior antioxidant activities and 36.1% stronger inhibitory activity on α-glucosidase compared to betanin. Mechanistic studies have revealed that they function as mixed-type inhibitors of α-amylase and competitive inhibitors of α-glucosidase, with interactions predominantly driven by hydrogen bonding. Notably, phyllocactin demonstrated a greater binding affinity with enzymes than betanin, thereby substantiating its heightened inhibitory activity. Overall, our results highlight novel bioactivities of betacyanin monomers and provide profound insights into the intricate interplay between structures and properties.

Quantification of treprostinil concentration in rat and human using a novel validated and rapid liquid chromatography-tandem mass spectrometry method: Experimental and clinical applications in ischemia-reperfusion injury

Treprostinil (Remodulin®) is a Food and Drug Administration (FDA) approved prostacyclin analog to treat pulmonary arterial hypertension. Recently, treprostinil has been investigated to reduce ischemia-reperfusion injury (IRI) during transplantation, which currently has no approved treatment. A validated analytical method is necessary to measure treprostinil concentrations in biological specimens. Here, a novel, sensitive, and specific method to measure treprostinil concentrations in rat serum, human serum, and human plasma has been developed using liquid chromatography with tandem mass spectrometry (LC-MS/MS). Biological samples were processed by protein precipitation before chromatography and 6-keto Prostaglandin F1α-d4 was used as an internal standard. A gradient method was established with a total run time of 4 min. The assay was linear over the range of 0.25-75.0 ng/ml with accuracy (92.97-107.87 %), intra-assay precision (1.16-3.34 %), and inter-assay precision (1.11-4.58 %) in all biological matrices, which are within FDA acceptance criteria. No significant variation in treprostinil or 6-keto Prostaglandin F1α-d4 concentrations were observed under the investigated storage conditions. This novel, sensitive, and specific LC/MS-MS method is cost-effective and suitable for measuring treprostinil concentrations in animal studies and human biological samples for clinical applications.

Advanced porous organic materials for sample preparation in pharmaceutical analysis

The development of novel sample preparation media plays a crucial role in pharmaceutical analysis. To facilitate the extraction and enrichment of pharmaceutical molecules in complex samples, various functionalized materials have been developed and prepared as adsorbents. Recently, some functionalized porous organic materials have become adsorbents for pharmaceutical analysis due to their unique properties of adsorption and recognition. These advanced porous organic materials, combined with consequent analytical techniques, have been successfully used for pharmaceutical analysis in complex samples such as environmental and biological samples. This review encapsulates the progress of advanced porous materials for pharmaceutical analysis including pesticides, antibiotics, chiral drugs, and other compounds in the past decade. In addition, we also address the limitations and future trends of these porous organic materials in pharmaceutical analysis.

A review of bioanalytical applications of microextraction techniques combined with derivatization

Microextraction techniques have attracted the attention of many researchers working in the field of bioanalysis due to their unique advantages, mainly in downsizing the scale of sample preparation steps. In parallel, analytical derivatization offers a powerful combination in terms of additional sensitivity, selectivity and compatibility with modern separation techniques. The aim of this review is to discuss the most recent advances in bioanalytical sample preparation based on the combination of microextraction and analytical derivatization. Both innovative fundamental reports and analyte-targeted applications are included and discussed. Dispersive liquid-liquid extraction and solid-phase microextraction are the most common techniques that typically combined with derivatization, while the development of novel and greener protocols is receiving substantial consideration in the field of analytical chemistry.

Novel amino-functionalized magnetic metal-organic framework/layered double hydroxide adsorbent for microfluidic solid phase extraction: Application for vitamin D3

Vitamin D deficiency is highly prevalent worldwide, especially with limited sun exposure and sun avoidance. Thus, reliable monitoring of vitamin D levels in food and biological samples is vital for medicinal diagnosis. Herein, a potent method for the extraction and determination of vitamin D₃ is presented using a microchip-based solid-phase extraction (SPE) device followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) detection. A new magnetic adsorbent based on Fe₃O₄ magnetic nanoparticles (MNPs) modified ZnFe layered double hydroxide (LDH)/2-aminoterephthalic acid-Zn²⁺ metal-organic framework (IRMOF-3) composite (IRMOF-3@MLDH) was successfully synthesized and fixed inside a rectangular micro-column (4 × 2 × 12 mm). The porous structure and high surface area of IRMOF-3@MLDH provide abundant adsorbing sites and make it a potent SPE adsorbent, with an exceptional ability to retain vitamin D₃. The adsorption isotherm showed that the composite was highly efficient at extracting vitamin D₃ with an extraction capacity of 126 mg g^-1. The designed extraction microchip simplified the SPE process, paving the way for automated SPE systems. The developed method presented a broad linear range of 5-2000 ng mL^-1, with a detection limit of 1.4 ng mL^-1. In comparison to conventional silica-based adsorbents, a higher sensitivity was obtained in the determination of vitamin D₃ using the IRMOF-3@MLDH adsorbent. The selectivity of the method was also satisfactory, enabling the measurement of vitamin D₃ in food and blood samples with high recovery values in the range from 95.2 to 101%. Thus, the newly developed adsorbent and method offer an efficient alternative to the commonly used C18-based approach.

Managing Viral Emerging Infectious Diseases via Current and Future Molecular Diagnostics

Emerging viral infectious diseases have been a constant threat to global public health in recent times. In managing these diseases, molecular diagnostics has played a critical role. Molecular diagnostics involves the use of various technologies to detect the genetic material of various pathogens, including viruses, in clinical samples. One of the most commonly used molecular diagnostics technologies for detecting viruses is polymerase chain reaction (PCR). PCR amplifies specific regions of the viral genetic material in a sample, making it easier to detect and identify viruses. PCR is particularly useful for detecting viruses that are present in low concentrations in clinical samples, such as blood or saliva. Another technology that is becoming increasingly popular for viral diagnostics is next-generation sequencing (NGS). NGS can sequence the entire genome of a virus present in a clinical sample, providing a wealth of information about the virus, including its genetic makeup, virulence factors, and potential to cause an outbreak. NGS can also help identify mutations and discover new pathogens that could affect the efficacy of antiviral drugs and vaccines. In addition to PCR and NGS, there are other molecular diagnostics technologies that are being developed to manage emerging viral infectious diseases. One of these is CRISPR-Cas, a genome editing technology that can be used to detect and cut specific regions of viral genetic material. CRISPR-Cas can be used to develop highly specific and sensitive viral diagnostic tests, as well as to develop new antiviral therapies. In conclusion, molecular diagnostics tools are critical for managing emerging viral infectious diseases. PCR and NGS are currently the most commonly used technologies for viral diagnostics, but new technologies such as CRISPR-Cas are emerging. These technologies can help identify viral outbreaks early, track the spread of viruses, and develop effective antiviral therapies and vaccines.

Novel Sorptive Sample Preparation Techniques for Separation Science

The primary analytical challenge is to selectively extract the target analytes using a suitable sample preparation technique and introduce them into the downstream analytical instrument. The critical step in the chemical analysis is sample preparation. Sorptive sample preparation techniques are among the new generation of microextraction approaches, and are compliant with green analytical chemistry principles. A recent intercontinental collaboration between two academic research laboratories—the Aristotle University of Thessaloniki, Greece, and the Florida International University, USA—has yielded a significant number of analytical/bioanalytical methods using fabric phase sorptive extraction (FPSE), magnet integrated fabric phase sorptive extraction (MI-FPSE), and capsule phase microextraction (CPME) for the isolation of various analytes from different complex sample matrices. A brief description of these techniques with regards to principle, synthesis, applications, and advantages and disadvantages along with paradigms is presented.

A multi-site recognition molecularly imprinted solid-phase microextraction fiber for selective enrichment of three cross-class environmental endocrine disruptors

Molecularly imprinted solid-phase microextraction fibers with multi-site recognition were prepared for the simultaneous enrichment of three cross-class environmental endocrine disruptors (EEDs) in environmental water. The surface morphology of the multi-site recognition molecularly imprinted fibers was characterized using scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, and surface area and pore size analyzer. Under optimal extraction conditions, the molecularly imprinted fibers showed higher extraction capacity to bisphenol F, diethyl phthalate, and methyl paraben than non-imprinted polymer fibers and commercial fibers. Compared with commercial solid-phase microextraction fibers, the multi-site recognition molecularly imprinted fibers showed superior extraction performance at different concentrations of analytes. The selectivity study confirmed that the multi-site recognition molecularly imprinted solid-phase microextraction fibers were highly selective not only for specific template molecules but also for bisphenols, parabens, and phthalates. Furthermore, the method achieved a limit of detection of 0.003-0.02 μg L^-1 for the three cross-class EEDs in environmental water samples with recoveries ranging from 75.76% to 112.69% and relative standard deviations below 11.46%. Thus, the novel MIP fibers with multi-site recognition prepared in this work have provided a promising approach in the field of specific adsorption and a strategy for the simultaneous and sensitive monitoring of multiple cross-class trace EEDs.

Facile synthesis of hollow microtubular COF as enrichment probe for quantitative detection of ultratrace quinones in mice plasma with APGC-MS/MS

A hollow microtubular covalent organic framework (denoted as TatDha-COF) was synthesized by solvothermal method for the enrichment and determination of quinones. The TatDha-COF showed large specific surface area (2057 m² g^-1), good crystal structure, ordered pore size distribution (2.3 nm), stable chemical properties and good reusability. Accordingly, a simple and efficient method based on dispersive solid-phase extraction (d-SPE) and atmospheric pressure gas chromatography tandem mass spectrometry (APGC-MS/MS) was developed for the determination of quinones in complex samples. The established method demonstrated a wide liner range, good linearity (r>0.9990), high enrichment factors (EFs, 24-69-folds) and low detection limits (LODs, 0.200-30.0 pg L^-1, S/N≥3). On this basis, the suggested method was successfully applied to sensitively detect the eight ultratrace quinones in mice plasma. Overall, the established method has provided a powerful tool for the enrichment and detection of ultratrace quinones in complex samples, presenting the promising application of TatDha-COF in sample pretreatment.

Electrochemical Biosensors for Pathogen Detection: An Updated Review

Electrochemical biosensors are a family of biosensors that use an electrochemical transducer to perform their functions. In recent decades, many electrochemical biosensors have been created for pathogen detection. These biosensors for detecting infections have been comprehensively studied in terms of transduction elements, biorecognition components, and electrochemical methods. This review discusses the biorecognition components that may be used to identify pathogens. These include antibodies and aptamers. The integration of transducers and electrode changes in biosensor design is a major discussion topic. Pathogen detection methods can be categorized by sample preparation and secondary binding processes. Diagnostics in medicine, environmental monitoring, and biothreat detection can benefit from electrochemical biosensors to ensure food and water safety. Disposable and reusable biosensors for process monitoring, as well as multiplexed and conformal pathogen detection, are all included in this review. It is now possible to identify a wide range of diseases using biosensors that may be applied to food, bodily fluids, and even objects' surfaces. The sensitivity of optical techniques may be superior to electrochemical approaches, but optical methods are prohibitively expensive and challenging for most end users to utilize. On the other hand, electrochemical approaches are simpler to use, but their efficacy in identifying infections is still far from satisfactory.

A novel portable label-free electrochemical immunosensor for ultrasensitive detection of Aeromonas salmonicida in aquaculture seawater

Infectious diseases caused by Aeromonas salmonicida (A. salmonicida) have a huge impact and produce significant losses in aquaculture and fish farming. Fish pathogen early detection is a critical step for the rapid identification and prevention of these problems. This work presents a novel portable label-free ultrasensitive electrochemical immunosensor for A. salmonicida detection in seawater. It consists of a fluidic integrated electrochemical-cell-chip (ECC) with independent chambers enclosing three electrochemical cells (ECs). Anti-A. salmonicida (AbSalm) antibodies were covalently attached to the gold surface of the microfabricated electrodes and were used for the sensitive detection of A. salmonicida. The antibody-antigen immunoreaction was studied by enzyme-linked immunosorbent assay (ELISA), and the surface functionalization was characterized by using quartz crystal microbalance (QCM), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). The performance of the developed immunosensor, in terms of sensitivity, repeatability, and specificity, was also studied. The linear working range varied between 1 and 10⁷ CFU mL^-1, with a limit of detection (LOD) as low as 1 CFU mL^-1. The suitability of the immunosensor for real sample detection was successfully demonstrated via recovery studies performed in spiked seawater samples. The proposed technology supports the use of low-cost and portable instrumentation that concedes the ultrasensitive, simple, and fast quantification of the A. salmonicida. To the best of our knowledge, this is the first portable sensing system for the detection of A. salmonicida in seawater samples, which provides a promising online monitoring platform for the detection of this bacterium in aquaculture facilities.

Emerging Biosensing Technologies for the Diagnostics of Viral Infectious Diseases

Several viral infectious diseases appear limitless since the beginning of the 21^st century, expanding into pandemic lengths. Thus, there are extensive efforts to provide more efficient means of diagnosis, a better understanding of acquired immunity, and improved monitoring of inflammatory biomarkers, as these are all crucial for controlling the spread of infection while aiding in vaccine development and improving patient outcomes. In this regard, various biosensors have been developed recently to streamline pathogen and immune response detection by addressing the limitations of traditional methods, including isothermal amplification-based systems and lateral flow assays. This review explores state-of-the-art biosensors for detecting viral pathogens, serological assays, and inflammatory biomarkers from the material perspective, by discussing their advantages, limitations, and further potential regarding their analytical performance, clinical utility, and point-of-care adaptability. Additionally, next-generation biosensing technologies that offer better sensitivity and selectivity, and easy handling for end-users are highlighted. An emerging example of these next-generation biosensors are those powered by novel synthetic biology tools, such as clustered regularly interspaced short palindromic repeats (CRISPR) with CRISPR-associated proteins (Cas), in combination with integrated point-of-care devices. Lastly, the current challenges are discussed and a roadmap for furthering these advanced biosensing technologies to manage future pandemics is provided.

Current development of bioanalytical sample preparation techniques in pharmaceuticals

Sample preparation is considered as the bottleneck step in bioanalysis because each biological matrix has its own unique challenges and complexity. Competent sample preparation to extract the desired analytes and remove redundant components is a crucial step in each bioanalytical approach. The matrix effect is a key hurdle in bioanalytical sample preparation, which has gained extensive consideration. Novel sample preparation techniques have advantages over classical techniques in terms of accuracy, automation, ease of sample preparation, storage, and shipment and have become increasingly popular over the past decade. Our objective is to provide a broad outline of current developments in various bioanalytical sample preparation techniques in chromatographic and spectroscopic examinations. In addition, how these techniques have gained considerable attention over the past decade in bioanalytical research is mentioned with preferred examples. Modern trends in bioanalytical sample preparation techniques, including sorbent-based microextraction techniques, are primarily emphasized.

•

Bioanalytical sampling techniques are described with suitable applications in pharmaceuticals.

•

The pros and cons of each bioanalytical sampling techniques are described.

•

Relevant biological matrices are outlined.

Assessment of greenness for the determination of voriconazole in reported analytical methods

Analytical research with adverse environmental impact has caused a severe rise in concern about the ecological consequences of its strategies, most notably the use and emission of harmful solvents/reagents into the atmosphere. Nowadays, industries are searching for the best reproducible methods. Voriconazole is a second-generation azole derivative used effectively in the treatment of Candida and Aspergillus species infections and oropharyngeal candidiasis in AIDS patients. Recently it has become the drug of choice in treating mucormycosis in several countries, which raises the need for production in large quantities. The present review deals with various recent important analytical techniques used to estimate voriconazole and its combination in pharmaceutical formulations and biological fluids. The methods show their own unique way of analyzing voriconazole in different matrices with excellent linearity, detection, and quantification limits. Additionally, this article deals with methods and solvents analyzed for their impact on the environment. This is followed by estimating the degree of greenness of the methods using various available assessment tools like analytical eco-scale, national environmental method index, green analytical procedure index, and AGREE metrics to confirm the environmental impact. The scores obtained with the evaluation tools depict the quantum of greenness for the reported methods and provide an ideal approach adopted for VOR estimation. Very few methods are eco-friendly, which shows that there is a need for the budding analyst to develop methods based on green analytical principles to protect the environment.

Isolation of N-nitrosodimethylamine from drug substances using solid-phase extraction-liquid chromatography-tandem mass spectrometry

N-Nitrosodimethylamine (NDMA) has been detected in some drug substances and pharmaceutical products containing sartans, ranitidine and metformin, and a potential risk of NDMA contamination exists in other drug substances and their pharmaceutical products. To quantitate NDMA in various drugs having diverse physicochemical properties, a specific, sensitive, and reliable analytical method is required, in addition to methods that can be applied to a class of nitrosamines. We aimed to develop an off-line isolation method for NDMA in drug substances using SPE for quantification with LC-APCI-MS/MS. Impediments to accurate quantitation of NDMA in drug substances using LC-MS/MS and insufficient durability of the system are attributed to the extremely large amounts of active pharmaceutical ingredients (APIs) in sample solutions in comparison to the trace amount of NDMA. A reduced retention of NDMA and/or decreased separation from other substances in LC, matrix effect in MS detection, and undesirable contamination of instruments with API and other substances may be occasionally encountered, all of which consequently result in deterioration of system performance and generation of unreliable data, even in the cases where a divert valve is configured between the column and ion source of the MS instrument. To address these problems, an off-line NDMA isolation methodology from APIs exhibiting diverse physicochemical properties, namely ranitidine hydrochloride (ranitidine), metformin hydrochloride (metformin), nizatidine, valsartan, and telmisartan, was developed. The applicability of the method was confirmed by batch analysis of metformin and ranitidine. Furthermore, contrary to previous reports, NDMA was found to be stable over a wide pH range. The proposed methodology and data from this study would contribute to the control of NDMA contamination in various drugs to realize the safe delivery of pharmaceuticals to patients.

The role of pKa, log P of analytes, and protein matrix in solid-phase extraction using native and coated nanofibrous and microfibrous polymers prepared via meltblowing and combined meltblowing/electrospinning technologies

Effect of physicochemical properties including dissociation constant (pKa) and partition coefficient (log P) of the compounds on their extraction efficiency in sample preparation using fibrous polymer sorbents has been demonstrated. Poly-ε-caprolactone as meltblown/electrospun composite fibers, and polypropylene, polyethylene, poly(3-hydroxybutyrate), poly(lactic acid), and polyamide 6 in the meltblown fiber format were used as sorbents in solid-phase extraction. In addition, the polycaprolactone fibers were coated with dopamine, dopamine combined with heparin, and tannin, respectively, to modify their extraction properties. These fibers that were not yet used for extractions and the unique combination of sorbents and analytes significantly extends the scope of nanofibrous extraction. The extraction efficiency was determined using model pharmaceuticals including acetylsalicylic acid, moxonidine, metoprolol, propranolol, propafenone, diltiazem, atorvastatin, and amiodarone. These model compounds displayed the widest differences in both pKa and log P values. The extraction efficiency of some of the fibers reached 96.64%. Coating of polycaprolactone fibers with dopamine significantly improved extraction efficiency of slightly retained metoprolol while moxonidine was not retained on any sorbent. The fibrous sorbents were also tested for extraction of pharmaceuticals in bovine serum albumin and human serum, respectively, to demonstrate their capability to extract them from a complex protein-containing matrix. The clean-up efficiency of our fibers was compared with that of a commercial restricted access media (RAM) C-18 alkyl-diol silica column. Our technique is in accordance with the requirements of modern sample preparation techniques.

NQS-Doped PDMS Solid Sensor: From Water Matrix to Urine Enzymatic Application

The development of in situ analytical devices has gained outstanding scientific interest. A solid sensing membrane composed of 1,2-naphthoquinone-4-sulfonate (NQS) derivatizing reagent embedded into a polymeric polydimethylsiloxane (PDMS) composite was proposed for in situ ammonium (NH₄⁺) and urea (NH₂CONH₂) analysis in water and urine samples, respectively. Satisfactory strategies were also applied for urease-catalyzed hydrolysis of urea, either in solution or glass-supported urease immobilization. Using diffuse reflectance measurements combined with digital image processing of color intensity (RGB coordinates), qualitative and quantitative analyte detection was assessed after the colorimetric reaction took place inside the sensing membrane. A suitable linear relationship was found between the sensor response and analyte concentration, and the results were validated by a thymol-PDMS-based sensor based on the Berthelot reaction. The suggested sensing device offers advantages such as rapidity, versatility, portability, and employment of non-toxic reagents that facilitate in situ analysis in an energy-efficient manner.

Microorganisms as Bio-SPE Materials for Extraction of Pharmaceutical Drugs: Mechanism of Extraction

In solid-phase extraction (SPE), the extraction materials depend on the physicochemical interactions to obtain the target analytes from complex systems. However, many matrix interferences existing in real samples influence the extraction efficiency through these common interactions. Therefore, extraction materials based on more special interactions for biological systems need to be developed. In this work, live microorganisms including Escherichia coli and Staphylococcus aureus were considered as the potential biological SPE (bio-SPE) materials with their biological functions in the live state. To study the enrichment and selectivity of the bio-SPE, four antibacterial drugs and two non-antibacterial drugs were employed as the target analytes. The enrichment factor (EF) was used as the evaluation index. The results showed that when using chlorpheniramine (CPM) and ofloxacin (OFLO), the enrichment capacity of E. coli was better than that of S. aureus. When extracting a single analyte, the enrichment ability of E. coli for CPM was significantly higher than other analytes, and the EF was 8.5. In a mixture solution of antibacterial analytes, OFLO could be enriched mostly by E. coli. However, in the mixture solution of antibacterial and non-antibacterial analytes, CPM was enriched more than that of antibacterial analytes. In real rat plasma, bio-SPE using live E. coli could obviously extract CPM, while traditional liquid-liquid extraction could not. The confocal microscopy results showed that the extraction mechanism may not only depend on the surface adsorption of bacteria with analytes but also on the uptake into bacteria. This provides a valuable basis for the development of more biological separation materials based on biological interactions.

Virus Detection: A Review of the Current and Emerging Molecular and Immunological Methods

Viruses are ubiquitous in the environment. While many impart no deleterious effects on their hosts, several are major pathogens. This risk of pathogenicity, alongside the fact that many viruses can rapidly mutate highlights the need for suitable, rapid diagnostic measures. This review provides a critical analysis of widely used methods and examines their advantages and limitations. Currently, nucleic-acid detection and immunoassay methods are among the most popular means for quickly identifying viral infection directly from source. Nucleic acid-based detection generally offers high sensitivity, but can be time-consuming, costly, and require trained staff. The use of isothermal-based amplification systems for detection could aid in the reduction of results turnaround and equipment-associated costs, making them appealing for point-of-use applications, or when high volume/fast turnaround testing is required. Alternatively, immunoassays offer robustness and reduced costs. Furthermore, some immunoassay formats, such as those using lateral-flow technology, can generate results very rapidly. However, immunoassays typically cannot achieve comparable sensitivity to nucleic acid-based detection methods. Alongside these methods, the application of next-generation sequencing can provide highly specific results. In addition, the ability to sequence large numbers of viral genomes would provide researchers with enhanced information and assist in tracing infections.

Simultaneous extraction and analysis of clozapine and lorazepam from human plasma using dual solvent-stir bar microextraction with different acceptor phases followed by high-performance liquid chromatography ultra-violet detection

A new design of dual solvent stir bar microextraction (DSSBME) was developed and combined with HPLC-UV for the simultaneous extraction of clozapine (CLZ) and lorazepam (LRP) from human plasma with different acceptor phases. Two short hollow fibers immobilized with an organic extraction solvent were used as the solvent bars for microextraction of CLZ and LRP from the sample solution. The solvent bars were fixed with a staple pin which served as the stirrer. The target analytes were simultaneously and selectively extracted from the sample solution into their corresponding solvent bar. Extraction parameters such as organic solvent type, pH of the sample solution, the acceptor phase concentration, salt incorporation into the solution, stirring rate, and extraction time were optimized to achieve the best extraction results. Under the optimum conditions (1-undecanol as extraction solvent, pH of sample solution = 9.0, 10% w/v NaCl, concentration of HCl = 10 mM, concentration of NaOH = 100 mM, stirring rate of 1400 rpm and extraction time of 30 min at ambient temperature) the limit of detection for CLZ was 0.4 ng mL^-1 and for LRP it was 1.1 ng mL^-1. The linear range for CLZ was 1.3-1000.0 ng mL^-1 (R² = 0.9991) and for LRP it was 3.6-800.0 ng mL^-1 (R² = 0.9993). Extraction recovery and the enrichment factor for CLZ were 95.4% and 343 and for LRP they were 74.3% and 263, respectively. Finally, the method developed was successfully applied for the simultaneous determination of CLZ and LRP in human plasma samples.

Solid phase extraction-based magnetic carbon nitride/metal organic framework composite with high performance liquid chromatography for the determination of tyrosine kinase inhibitors in urine samples

In this study, a novel solid phase extraction method was constructed to detect three tyrosine kinase inhibitors (TKIs) in urine with a high-performance liquid chromatography-diode array detector. The sorbent MCN/BIF-20 was constructed by magnetic g-C₃N₄ (MCN) and boron imidazole framework-20 (BIF-20) and was characterized by multiple techniques. The experimental results of the adsorption isotherm and adsorption kinetics indicated that the composites had good adsorption of TKIs (148.33 mg g^-1, 283.25 mg g^-1, 188.17 mg g^-1). The reason for the good adsorption property of the complex material was revealed by comparison with each single material. The analytical method was built by a single factor experiment, and was evaluated as a suitable method to detect TKIs in urine by its good accuracy (90.35-98.69%), precision (<3.9%), appropriate detection limits (2.2-3.4 ng mL^-1), and linear ranges (12.5-500 ng mL^-1) with convenient determination coefficients (>0.9997). The performance of the MCN/BIF-20 composite did not decrease dramatically in 3 cycles. These analytical results demonstrated that g-C₃N₄ and BIFs had a bright prospect in sample pretreatment, and the proposed approach based on MCN/BIF-20 was applicable for analysis of TKIs in urine.

Rapid ultrasound-assisted microextraction of atorvastatin in the sample of blood plasma by nickel metal organic modified with alumina nanoparticles

In the present work, nickel-1,4-benzenedioxyacetic acid was synthesized as a rod-like metal organic material and then modified with alumina nanoparticles to synthesize nickel metal organic modified-Al₂ O₃ nanoparticles. The material was found as an efficient sorbent for the enrichment of atorvastatin in human blood plasma. After the extraction of the sample of plasma by ultrasound-assisted dispersive solid phase extraction, high performance liquid chromatography-ultraviolet was used to determine the quantitatively pre-concentrated interest analyte. The conditions for optimum extraction were achieved by the optimization of the volume of eluent, dosage of the sorbent, and time of sonication. Solution pH of 7.0, 250 μL of ethanol, 45 mg of the sorbent, and 10 min of sonication time were the conditions for extracting the atorvastatin maximum recovery of higher than 97.0%. By using desirability function for the optimization of the process, the present method showed a response that was linear ranging from 0.2 to 800 ng/mL with regression coefficient of 0.999 in the plasma of human blood with a satisfactory detection limit of 0.05 ng/mL, while the precision of interday for the current method was found to be <5%. It can be concluded that dispersive solid phase extraction method is effective for the extraction of atorvastatin from human plasma samples (97.4-102%) due to its easy operation, simplicity, repeatability, and reliability.

Electrochemical biosensors for pathogen detection

Recent advances in electrochemical biosensors for pathogen detection are reviewed. Electrochemical biosensors for pathogen detection are broadly reviewed in terms of transduction elements, biorecognition elements, electrochemical techniques, and biosensor performance. Transduction elements are discussed in terms of electrode material and form factor. Biorecognition elements for pathogen detection, including antibodies, aptamers, and imprinted polymers, are discussed in terms of availability, production, and immobilization approach. Emerging areas of electrochemical biosensor design are reviewed, including electrode modification and transducer integration. Measurement formats for pathogen detection are classified in terms of sample preparation and secondary binding steps. Applications of electrochemical biosensors for the detection of pathogens in food and water safety, medical diagnostics, environmental monitoring, and bio-threat applications are highlighted. Future directions and challenges of electrochemical biosensors for pathogen detection are discussed, including wearable and conformal biosensors, detection of plant pathogens, multiplexed detection, reusable biosensors for process monitoring applications, and low-cost, disposable biosensors.

Poly-ε-caprolactone Nanofibrous Polymers: A Simple Alternative to Restricted Access Media for Extraction of Small Molecules from Biological Matrixes

Poly-ε-caprolactone nanofibrous polymer has been used as an alternative to restricted access media for extraction of protein-containing biological samples and direct transfer in the chromatographic system. Three commercial cartridges differing in length and internal diameter have been manually packed with the composite material prepared from poly-ε-caprolactone nanofibers coated on poly-ε-caprolactone microfibrous scaffold and connected to the column-switching chromatographic system. Bovine milk and human serum (25 μL) spiked with a mixture of methyl-, ethyl-, propyl-, and butylparaben in a concentration range of 1-100 μg mL^-1 were online extracted using the cartridge-containing fibers. Then, 5 and 20% (v/v) aqueous methanol was applied as the washing mobile phase. While the ballast protein macromolecules were quantitatively eluted from the nano/microfibrous composite sorbent, the parabens were retained. After the mobile phase was switched to a stronger one, these compounds were then eluted from the extraction sorbent, directed in the analytical column, and finally separated. An extraction efficiency of 86-101% for all parabens achieved using the optimum-sized cartridge and a repeatability of the extraction procedure of 0.06-1.95% RSD were obtained.

Salivary lactate and 8-isoprostaglandin F2α as potential non-invasive biomarkers for monitoring heart failure: a pilot study

Heart failure (HF) is a cardiovascular disease affecting about 26 million people worldwide costing about $100 billons per year. HF activates several compensatory mechanisms and neurohormonal systems, so we hypothesized that the concomitant monitoring of a panel of potential biomarkers related to such conditions might help predicting HF evolution. Saliva analysis by point-of-care devices is expected to become an innovative and powerful monitoring approach since the chemical composition of saliva mirrors that of blood. The aims of this study were (i) to develop an innovative procedure combining MEPS with UHPLC-MS/MS for the simultaneous determination of 8-isoprostaglandin F2α and cortisol in saliva and (ii) to monitor lactate, uric acid, TNF-α, cortisol, α-amylase and 8-isoprostaglandin F2α concentrations in stimulated saliva samples collected from 44 HF patients during their hospitalisation due to acute HF. Limit of detection of 10 pg/mL, satisfactory recovery (95-110%), and good intra- and inter-day precisions (RSD ≤ 10%) were obtained for 8-isoprostaglandin F2α and cortisol. Salivary lactate and 8-isoprostaglandin F2α were strongly correlated with NT-proBNP. Most patients (about 70%) showed a significant decrease (a factor of 3 at least) of both lactate and 8-isoprostaglandin F2α levels at discharge, suggesting a relationship between salivary levels and improved clinical conditions during hospitalization.

Bioanalytical HPLC Applications of In-Tube Solid Phase Microextraction: A Two-Decade Overview

In-tube solid phase microextraction is a cutting-edge sample treatment technique offering significant advantages in terms of miniaturization, green character, automation, and preconcentration prior to analysis. During the past years, there has been a considerable increase in the reported publications, as well as in the research groups focusing their activities on this technique. In the present review article, HPLC bioanalytical applications of in-tube SPME are discussed, covering a wide time frame of twenty years of research reports. Instrumental aspects towards the coupling of in-tube SPME and HPLC are also discussed, and detailed information on materials/coatings and applications in biological samples are provided.

A robust, hand-powered, instrument-free sample preparation system for point-of-care pathogen detection

Here, we describe a simple, universal protocol for use in nucleic acid testing-based pathogen diagnostics, which requires only hand-powered sample preparation, including the processes of pathogen enrichment and nucleic acid isolation. The protocol uses low-cost amine-functionalized diatomaceous earth with a 1-μm Teflon filter as a reaction matrix in both stages of the process, using homobifunctional imidoesters. Using a simple syringe as a pump, the capture efficiency for a large sample volume (<50 mL) was enhanced by up to 98.3%, and the detection limit was 1 CFU/mL, 100-fold better than that of common commercial nucleic acid isolation kit. This protocol can also be combined with commercialized 96-well filter plates for robust sample preparation. Our proposed system is robust, simple, low-cost, universal, and rapid (taking <20 min), and it works regardless of the ambient environment and sample pretreatment, requiring no electricity or instruments. Its benefits include the simplicity of producing its components and its ease of operation, and it can be readily integrated with other assays for point-of-care diagnostics.

Tunable solvency mixtures of tetrahydrofuran:water for efficient and fast extraction/clean-up of trace contaminants

In this study, we investigated the potential of mixtures of tetrahydrofuran (THF) and water as tunable solvents for the microextraction of contaminants in solid and in liquid matrices. These two miscible solvents have very different dielectric constant and Hildebrand solubility parameters, so that tunable mixtures spanning a wide range of dispersion and hydrogen bonding forces could be easily prepared by simply changing their composition. In this way, rapid and more efficient extraction methods can be developed. A liquid-liquid and a solid-liquid microextraction method for the determination of bisphenol A (BPA) in urine and ochratoxin A (OTA) in cereal baby food were developed as a proof of concept. Both, the chemical composition and the relative solvency of the THF-water mixtures, expressed as Teas solubility parameters, were studied in order to gain some insights into the chemical interactions governing analyte extraction. For urine, the salting-out extraction with THF:water and NaCl was evaluated, a process which is still scarcely investigated for analytical purposes. These methods featured good recoveries (above 95%), satisfactory standard deviation (5-6%) and good sensitivity (detection limits of 0.l μg L^-1 for BPA and of 0.l ng g^-1 for OTA) with the advantages of simplicity, rapidity and low consumption of reagents. Recoveries for other compounds and matrices (bisphenols ad phosphorus flame retardants in dust and in tap water, dyes in tap water and OTA in powder milk) were also assessed to prove the wide potential of these tunable solvent mixtures.

Online clean-up setup for the determination of non-fluorescent acidic pharmaceutical drugs in complex biological samples

Analysis of acidic pharmaceuticals in complex biological samples is a challenging and formidable task due to the existence of interfering constituents within the sample matrices. Therefore, in order to avoid analytical column clogging and suppression/enhancement of signals of the analyte of interest, herein a simple, cost-effective and quick online ion chromatography based clean-up setup was introduced. This system was further coupled with a cost-effective homemade photochemically induced fluorimetric (PIF) setup for direct online conversion of non-fluorescent acidic pharmaceutical drugs into their respective fluorescent species. This advantageous system was favorably applied for the determination of four non-fluorescent acidic compounds in two complex biological samples (human serum and oral fluid) with minimum labor and organic solvent consumption. At optimized conditions, the developed method has shown good sensitivity, selectivity, satisfactory recoveries (88.68-102.14%) and low limits of detection (0.35-8.10 μg/L) with minimum or zero matrix effect.

Solid-phase microextraction: An appealing alternative for the determination of endogenous substances - A review

The determination of endogenous substances is of great significance for obtaining important biotic information such as biological components, metabolic pathways and disease biomarkers in different living organisms (e.g. plants, insects, animals and humans). However, due to the complex matrix and the trace concentrations of target analytes, the sample preparation procedure is an essential step before the analytes of interest are introduced into a detection instrument. Solid-phase microextraction (SPME), an emerging sample preparation technique that integrates sampling, extraction, concentration, and sample introduction into one step, has gained wide acceptance in various research fields, including in the determination of endogenous compounds. In this review, recent developments and applications of SPME for the determination of endogenous substances over the past five years are summarized. Several aspects, including the design of SPME devices (sampling configuration and coating), applications (in vitro and in vivo sampling), and coupling with emerging instruments (comprehensive two-dimensional gas chromatography (GC × GC), ambient mass spectrometry (AMS) and surface enhanced Raman scattering (SERS)) are involved. Finally, the challenges and opportunities of SPME methods in endogenous substances analysis are also discussed.

A critical retrospective and prospective review of designs and materials in in-line solid-phase extraction capillary electrophoresis

Several strategies have been developed to decrease the concentration limits of detection (LODs) in capillary electrophoresis (CE). Nowadays, chromatographic-based preconcentration using a microcartridge integrated in the separation capillary for in-line solid-phase extraction capillary electrophoresis (SPE-CE) is one of the best alternatives for high throughput and reproducible sample clean-up and analyte preconcentration. This review covers different designs (geometrical configurations, with frits or fritless, capillary types, compatibility with commercial instrumentation, etc.) and materials (sorbents, supports, affinity ligands, etc.) applied for almost 30 years to prepare in-line SPE-CE microcartridges (i.e. analyte concentrators), with emphasis on the conventional unidirectional configuration in capillary format. Advantages, disadvantages and future perspectives are analyzed in detail to provide the reader a wide overview about the great potential of this technique to enhance sensitivity and address trace analysis.

An online field-assisted micro-solid-phase extraction device coupled with high-performance liquid chromatography for the direct analysis of solid samples

Herein, a total online device based on field-assisted extraction (FAE), micro-solid-phase extraction (μ-SPE), and high-performance liquid chromatography (HPLC) was designed. Solid samples were pretreated with ultrasound-microwave synergic effects, and then the extract was cleaned up online with a monolithic column, followed by HPLC analysis. The cross-actions between ultrasound and microwave along with other extraction parameters were studied systematically. The efficiency of this online method was verified in the determination of polycyclic aromatic hydrocarbons (PAHs) in foods and tetracycline antibiotics (TCAs) in cosmetic samples. The detection limits of nine PAHs including fluorene, phenanthrene, anthracene, fluoranthene, benzo[k]fluoranthene, benz[a]anthracene, benzo[b]fluoranthene, pyrene, and benzo[a]pyrene were all within 0.075-0.30 μg/kg, as well as four TCAs including oxytetracycline, tetracycline, chlortetracycline, and doxycycline were within 0.02-0.06 μg/kg. Six PAHs were found in roast potatoes and baked fish and the recoveries were in the range of 71.5-119.7% with RSDs of 0.2-10.9% (n = 3). The recoveries for TCAs in cosmetic samples were in the range of 75.3-118.0% with RSDs lower than 8.2% (n = 3). Compared with those offline methods, this total online FAE-μ-SPE-HPLC method not only simplifies the operation process, but also increases the precision and accuracy. Beyond trace analytes analysis in solid and semi-solid matrixes, application of this total online analysis method can also be extended to investigate field-assisted extraction mechanisms. Graphical abstract.

A new microfluidic-chip device for selective and simultaneous extraction of drugs with various properties

In the present study, a newly designed microfluidic-chip device was used for the selective and simultaneous electromembrane extraction (EME) of drugs with different properties.

Adsorption efficiency enhancing of electrospun polycaprolactone nanofibers towards acidic polar drugs through the incorporation of a composite of graphene oxide nanosheets and Al30 polyoxocations: a comparative study

The main objective of this study focuses on exploration of the feasibility of Al30 polyoxocations for preparation of a novel sorbent material for a solid-phase extraction (SPE) method by selective adsorption and extraction of a class of compounds considering the type of interactions involved in the adsorption process. Accordingly, first Al30 polyoxocations were synthesized and their composite was prepared with graphene oxide (GO) nanosheets as a suitable substrate to be introduced as a SPE sorbent material. Then, the prepared composite was incorporated into polycaprolactone (PCL) nanofibers via electrospinning to present an alternative sorbent for SPE-based on a GO/Al30 nanocomposite (GO/Al30 NC) creating no need for filtering or centrifuging steps. Intercalation of Al30 polyoxocations into the GO layers and the incorporation of GO/Al30 NC into PCL nanofibers was successfully confirmed through FE-SEM, TEM, EDX, XRD, BET, TGA, IR spectroscopy, and zeta potential determination. For investigating the types of probable interactions involved in the adsorption process of different compounds on the proposed sorbents, four statin drugs, cholesterol-lowering agents with various polarity and ionization properties, were selected as model analytes. Factors affecting the extraction efficiency of dispersive SPE and immersed SPE methods using GO/Al30 NC and GO/Al30 NC-PCL nanofibers, respectively, were investigated and optimized. Under optimal conditions, acceptable analytical figures of merit were obtained for both SPE methods. A comparison of extraction efficiencies of the target drugs by the two proposed sorbents, as well as GO nanosheets and PCL nanofibers, was accomplished to study the types of interactions as well as the adsorption mechanism. The results revealed that GO/Al30 NC, having many polar and anion exchange sites caused by Al30 polyoxocations, is a good selective sorbent for acidic polar compounds which their extraction by nonpolar sorbents is not desirable. Additionally, GO/Al30 NC-PCL nanofibers exhibited extraction capability for a wide range of compounds from acidic polar to nonpolar and nonionizable ones.

Coupling oligonucleotides possessing a poly-cytosine tag with magnetic ionic liquids for sequence-specific DNA analysis

Oligonucleotide probes were designed with a poly-cytosine region that facilitates stable anchoring to a magnetic ionic liquid support. By tethering a recognition sequence to the poly-C tag, the resulting diblock oligonucleotides distinguished single-nucleotide variants and captured DNA targets from interfering genomic DNA and cell lysate for qPCR amplification.