Perturbing Tandem Energy Transfer in Luminescent Heterobinuclear Lanthanide Coordination Polymer Nanoparticles Enables Real-Time Monitoring of Release of the Anthrax Biomarker from Bacterial Spores

Smartphone-assisted mobile fluorescence sensor for self-calibrated detection of anthrax biomarker, Cu2+, and cysteine in food analysis

Dipicolinic acid (DPA), as a biomarker for Bacillus anthracis, is highly toxic at trace levels. Rapid and on-site quantitative detection of DPA is essential for maintaining food safety and public health. This work develops a dual-channel self-calibrated fluorescence sensor constructed by the YVO4:Eu and Tb-β-diketone complex for rapid visual detection of DPA. This sensor exhibits high selectivity, fast response time, excellent detection sensitivity, and the detection limit is as low as 4.5 nM in the linear range of 0-16 μM. A smartphone APP and portable ultraviolet lamp can assemble a mobile fluorescence sensor for on-site analysis. Interestingly, adding Cu2+ ions can quench the fluorescence intensity of Tb3+. In contrast, the addition of cysteine can restore the fluorescence, allowing the accurate detection of Cu2+ ions and cysteine in environmental water and food samples. This work provides a portable sensor that facilitates real-time analysis of multiple targets in food and the environment.

Metal-doped carbon dots for biomedical applications: From design to implementation

Carbon dots (CDs), as a new kind of fluorescent nanomaterials, show great potential for application in several fields due to their unique nano-size effect, easy surface functionalization, controllable photoluminescence, and excellent biocompatibility. Conventional preparation methods for CDs typically involve top-down and bottom-up approaches. Doping is a major step forward in CDs design methodology. Chemical doping includes both non-metal and metal doping, in which non-metal doping is an effective strategy for modulating the fluorescence properties of CDs and improving photocatalytic performance in several areas. In recent years, Metal-doped CDs have aroused the interest of academics as a promising nano-doping technique. This approach has led to improvements in the physicochemical and optical properties of CDs by altering their electron density distribution and bandgap capacity. Additionally, the issues of metal toxicity and utilization have been addressed to a large extent. In this review, we categorize metals into two major groups: transition group metals and rare-earth group metals, and an overview of recent advances in biomedical applications of these two categories, respectively. Meanwhile, the prospects and the challenges of metal-doped CDs for biomedical applications are reviewed and concluded. The aim of this paper is to break through the existing deficiencies of metal-doped CDs and fully exploit their potential. I believe that this review will broaden the insight into the synthesis and biomedical applications of metal-doped CDs.

Two AIE-Ligand-Based 2-D Luminescent Metal-Organic Frameworks as Fe3+ Sensors

The design and synthesis of high-performance sensors are very important but remain great challenges. In this work, a new aggregation-induced-emission (AIE) molecule 4,4'-(((9H-fluoren-9-ylidene)methylene)bis(4,1-phenylene))dipyridine (L) was successfully synthesized and first developed as a functional ligand to construct two isomorphic metal-organic frameworks (MOFs) [M(L)(OBBA)]n [M2+ = Cd2+ (1), Co2+ (2); H2OBBA = 4,4'-oxybisbenzoic acid]. They adopt [M2(COO)4] flywheel clusters, OBBA2- bridges, and terminal L ligands as building units to form isomorphic 2-D networks with Lewis base active cites (uncoordinated pyridyl N). Both 1 and 2 exhibit excellent water, pH, and thermal stabilities and extremely efficient Fe3+ sensing abilities in the water environment. The quenching constants and detection limits reach the best levels reported so far. The sensing mechanism of 1 and 2 toward Fe3+ is studied in depth, and the difference in their sensing performance is also explained.

Surface Bio-engineered Polymeric Nanoparticles

Surface bio-engineering of polymeric nanoparticles (PNPs) has emerged as a cornerstone in contemporary biomedical research, presenting a transformative avenue that can revolutionize diagnostics, therapies, and drug delivery systems. The approach involves integrating bioactive elements on the surfaces of PNPs, aiming to provide them with functionalities to enable precise, targeted, and favorable interactions with biological components within cellular environments. However, the full potential of surface bio-engineered PNPs in biomedicine is hampered by obstacles, including precise control over surface modifications, stability in biological environments, and lasting targeted interactions with cells or tissues. Concerns like scalability, reproducibility, and long-term safety also impede translation to clinical practice. In this review, these challenges in the context of recent breakthroughs in developing surface-biofunctionalized PNPs for various applications, from biosensing and bioimaging to targeted delivery of therapeutics are discussed. Particular attention is given to bonding mechanisms that underlie the attachment of bioactive moieties to PNP surfaces. The stability and efficacy of surface-bioengineered PNPs are critically reviewed in disease detection, diagnostics, and treatment, both in vitro and in vivo settings. Insights into existing challenges and limitations impeding progress are provided, and a forward-looking discussion on the field's future is presented. The paper concludes with recommendations to accelerate the clinical translation of surface bio-engineered PNPs.

A Dual-Mode Fluorescent Nanoprobe for the Detection and Visual Screening of Pathogenic Bacterial Spores

Bacterial vegetative cells turn into metabolically dormant spores in certain environmental situations. Once suitable conditions trigger the germination of spores belonging to the pathogenic bacterial category, public safety and environmental hygiene will be threatened, and lives will even be endangered when encountering fatal ones. Instant identification of pathogenic bacterial spores remains a challenging task, since most current approaches belonging to complicated biological methods unsuitable for onsite sensing or emerging alternative chemical techniques are still inseparable from professional instruments. Here we developed a polychromatic fluorescent nanoprobe for ratiometric detection and visual inspection of the pathogenic bacterial spore biomarker, dipicolinic acid (DPA), realizing rapidly accurate screening of pathogenic bacterial spores such as Bacillus anthracis spores. The nanoprobe is made of aminoclay-coated silicon nanoparticles and functionalized with europium ions, exhibiting selective and sensitive response toward DPA and Bacillus subtilis spores (simulants for Bacillus anthracis spores) with excellent linearity. The proposed sensing strategy allowing spore determination of as few as 0.3 × 105 CFU/mL within 10 s was further applied to real environmental sample detection with good accuracy and reliability. Visual quantitative determination can be achieved by analyzing the RGB values of the corresponding test solution color via a color recognition APP on a smartphone. Different test samples can be photographed at the same time, hence the efficient accomplishment of examining bulk samples within minutes. Potentially employed in various on-site sensing occasions, this strategy may develop into a powerful means for distinguishing hazardous pathogens to facilitate timely and proper actions of dealing with multifarious security issues.

Recent Advances in Gold Nanocluster-Based Biosensing and Therapy: A Review

Gold nanoclusters (Au NCs) with bright emission and unique chemical reactivity characters have been widely applied for optical sensing and imaging. With a combination of surface modifications, effective therapeutic treatments of tumors are realized. In this review, we summarize the recently adopted biosensing and therapy events based on Au NCs. Homogeneous and fluorometric biosensing systems toward various targets, including ions, small molecules, reactive oxygen species, biomacromolecules, cancer cells, and bacteria, in vitro and in vivo, are presented by turn-off, turn-on, and ratiometric tactics. The therapy applications are concluded in three aspects: photodynamic therapy, photothermal therapy, and as a drug carrier. The basic mechanisms and performances of these systems are introduced. Finally, this review highlights the challenges and future trend of Au NC-based biosensing and therapy systems.

Development of fluorescent GO-AgNPs-Eu3+ nanoparticles based paper visual sensor for foodborne spores detection

Foodborne spores are ubiquitous with extremely strong resistance, and pose a serious threat to food safety and human health. Therefore, rapid, sensitive, and selective detection of spores are crucial. In this study, a fluorescent probe was developed based on lanthanide ion (Eu3+)-labeled nano-silver-modified graphene oxide (GO-AgNPs-Eu3+) for the detection of 2,6-dipicolinic acid (DPA), a biomarker unique to spores, to allow quantitative spores detection. The GO-AgNPs-Eu3+ nano-fluorescent probe was loaded onto a polyvinylidene fluoride microfiltration membrane, and a smartphone-assisted portable GO-AgNPs-Eu3+ nanoparticles-based paper visual sensor was designed for rapid on-site quantitative and real-time online detection of spores. The results indicated that the developed probe achieved equilibrium binding with DPA within 5 min, and enhanced fluorescence emission through antenna effect. The fluorescence detection presented a good linear relationship in the DPA concentration range of 0-45 μM, with a DPA detection limit of 4.62 nM and spore detection limit of 104 cfu/mL. The developed sensor showed a change in fluorescence from blue to red with increasing DPA concentration, and this color change was quantitatively detected through smartphone RGB variations, with a detection limit of 13.1 μM for DPA and 6.3 cfu/mL for Bacillus subtilis spores. Subsequently, the sensitivity and selectivity of the developed sensor were verified using actual milk and water samples spiked with B. subtilis spores. The results of this study provided objective technological support for rapid detection of spores, which is important for reducing the occurrence of foodborne diseases and improving food safety.

Eu-doped ZIF-8 as a ratiometric fluorescence-scattering probe for the anthrax biomarker in food samples based on competitive coordination

Bacillus anthracis spores can cause contagious anthrax, so it is significant for the public safety to detect its biomarker dipicolinic acid (DPA). Ratiometric fluorescent probes for DPA have attracted great interest because of the self-calibration effect, but they suffer from the complicated construction of dual-emitting materials. With combining fluorescence and second-order scattering (SOS), Eu-doped Zn-based metal-organic framework (ZIF-8) was here designed as a ratiometric probe for DPA, avoiding the completed construction of dual-emitting materials. Eu-doped ZIF-8 exhibited no fluorescence but possessed strong SOS ascribed to the nanostructure. However, the competitive coordination of DPA not only triggered the antenna effect of Eu3+ but also caused the decomposition of Eu-doped ZIF-8. As a consequence, the fluorescence enhancement and the SOS weakness were observed upon the addition of DPA to Eu-doped ZIF-8. And thus, a ratiometric probe for DPA was constructed based on Eu-doped ZIF-8 by integrating fluorescence with SOS. The probe as-constructed could quantify DPA in a wide range of 0.1-150 μM with a rapid response (1 min) and a low detection limit (31 nM). It also displayed excellent manifestation for the analysis of food samples with reasonable accuracy (recoveries, 90.0%-101.5%) and satisfactory precision (RSDs, 0.6%-5.7%), offering a reliable tool for the supervision of the public safety.

Ratiometric fluorescent and electrochemiluminescent dual modal assay for detection of 2,6-pyridinedicarboxylic acid as an anthrax biomarker

2,6-pyridinedicarboxylic acid (DPA) is an excellent biomarker of Bacillus anthracis (B. anthracis). The sensitive detection of DPA, especially through visual point-of-care testing, was significant for accurate and rapid diagnosis of anthrax to timely prevent anthrax disease or biological terrorist attack. Herein, a ratiometric fluorescent (R-FL) and electrochemiluminescent (ECL) dual-mode detection platform with a lanthanide ion-based metal-organic framework (Ln-MOF, i.e., M/Y-X: M = Eu, Y = Tb, and X = 4,4',4″-s-triazine-1,3,5-triyltri-m-aminobenzoic acid) was developed. Eu/Tb-TATAB nanoparticles were constructed to identify DPA. The R-FL detection platform quantitatively detected DPA by monitoring the I545/I617 ratio of the characteristic fluorescence peak intensities of Tb3+ ions and Eu3+ ions. The ECL sensing platform successfully quantified DPA by exploiting the burst effect of DPA on the ECL signal. The above methods had highly sensitive and rapid detection of DPA in water and serum samples. The results showed that this dual-mode detection platform may be projected to be a powerful instrument for preventing related biological warfare and bio-terrorism.

Polyarylether-based COFs coordinated by Tb3+ for the fluorescent detection of anthrax-biomarker dipicolinic acid

In this study, a rare-earth hybrid luminescent material (lanthanide@COF) was constructed for the detection of a biomarker for anthrax (dipicolinic acid, DPA). JCU-505-COOH was prepared by the hydrolysis of the cyano group in JCU-505 via a post-synthetic modification strategy, then the carboxyl groups in JCU-505-COOH coordinated with Tb3+ ions, similar to pincer vising nut. The prepared Tb3+@JCU-505-COOH exhibited a turn-on response toward DPA, which allowed the lanthanide@COF to serve as a fluorescence sensor with excellent selectivity and high sensitivity (binding constant Ka = 3.66 × 103). The fluorescent probe showed satisfactory performance for the determination of DPA in saliva and urine with a detection limit of 0.6 μM. Moreover, we established a facile point-of-care testing (POCT) using the Tb3+@JCU-505-COOH-based fluorescent test paper together with a smartphone for the initial diagnosis of anthrax. As expected, Tb3+@JCU-505-COOH showed great potential for the rapid screening of anthrax due to low cost, simple operation, and wide applicability.

An intelligent "chemical tongue" for high-order monitoring ATP-related physiological phosphates and ATP hydrolysis through diverse transduction principles

For discriminating diverse analytes and monitoring a specific chemical reaction, the emerging multi-channel "chemical nose/tongue" is challenging multi-material "chemical nose/tongue". The former contributes greatly to integrating different transduction principles from a single sensing material, avoiding the need for complex design, high cost, and tedious operation involved with the latter. Therefore, this high-order sensing puts a particular emphasis on the effects of encapsulation. Herein, the plasmonic gold nanoparticles (Au NPs) are encapsulated as a core into the fluorescent guanine monophosphate-Tb3+ infinite coordination polymer nanoparticles (GMP-Tb ICPs) to obtain a core-shell nanocomposite named Au NPs@GMP-Tb ICPs. Hence, a dual-channel "chemical tongue" based on Au NPs@GMP-Tb ICPs is present to realize high-order sensing of adenosine triphosphate (ATP)-related physiological phosphates and the monitoring of ATP hydrolysis. Considering the affinity of Tb3+ towards P-O bonds, four inorganic phosphates and three nucleotide phosphates with different phosphate group numbers and steric hindrance effect directly regulate two stimulus responses (fluorescence intensity and UV-vis absorbance) of Au NPs@GMP-Tb ICPs. Robust statistical methods, such as linear discriminant analysis and hierarchical cluster analysis, are used to recognize each phosphate by the developed sensor array either in the aqueous solution or in complex media such as serum, together with efficiently monitored ATP hydrolysis at different intervals. These findings and blind test clarify that the designed "chemical tongue" guarantees interference resistance and strengthens analytical capacity, together with offering valuable insight into "lab-on-a-nanoparticle" development for monitoring specific chemical reactions.

Dual-Emitting Mixed-Lanthanide Metal-Organic Framework for Ratiometric and Quantitative Visual Detection of 2,6-Pyridine Dicarboxylic Acid

The detection of the major biomarker of Bacillus anthracis, 2,6-dipicolinic acid (DPA), has attracted great interest in recent years. In this work, mixed-lanthanide metal-organic frameworks (M'LnMOFs), TbxEu1-x-cppa (cppa = 5-(5-carboxypyridin-3-yl)isophthalic acid), with different Tb/Eu ratios, were solvothermally synthesized. The results reveal that ratiometric fluorescent probe [Tb0.533Eu0.467-(Hcppa)1.5(H2O)(DMF)]·3H2O is water and acid-base stable and exhibits excellent sensitivity (LOD = 2.286 μM), high selectivity, and fast response (<2 min) for the detection of DPA. Due to the blocked energy transfer from Tb3+ to Eu3+ and the inner filter effect upon the addition of DPA, the fluorescent probe shows a distinct color change from orange-red to green. Furthermore, the visual detection of DPA was realized by identifying the RGB values of MOF-based agarose hydrogel films via a smartphone, highlighting the practical application of the fluorescent probe for DPA detection under aqueous solution conditions.

Gelatinous lanthanide coordination polymer with aggregation-enhanced antenna effect for ratiometric detection of endogenous alkaline phosphatase

Aggregation-induced emission (AIE) and antenna effect (AE) are two significant behaviors that have attracted increasing attention. However, it is challenging to achieve the synergistic effect of AIE and AE in luminescent materials for more extensive applications. Here, four gelatinous Ln³⁺ coordination polymers (Ln-CPs) are synthesized by self-assembly of ciprofloxacin (CIP), adenosine monophosphate (AMP), and Ln³⁺ ions in aqueous medium. Encouragingly, a remarkable increase in the characteristic fluorescence of Ln³⁺ and a significant decrease in CIP are observed along with increasing concentration of Ln-CPs, which is attributed to the large aggregates formed by self-assembly that strictly constrain the intramolecular motions of antenna ligands, thereby achieving the aggregation-enhanced AE. More meaningfully, Eu-CP not only shows a rice-like morphology at high aggregation state, but also provides an opportunity for the selective detection of alkaline phosphatase (ALP). A new flower-like polymer is formed upon incubating Eu-CP with ALP, accompanied by the fluorescence quenching of Eu³⁺ and recovery of CIP, a ratiometric determination of ALP in the range of 0.1-6.0 U·L^-1 is thus achieved. Additionally, ALP assay in human serum and bioimaging in living cells have been successfully performed. This research opens a new horizon for the fabrication of Ln³⁺-based luminescent materials with promising applications.

Environmental sporobiota: Occurrence, dissemination, and risks

Spore-forming bacteria known as sporobiota are widespread in diverse environments from terrestrial and aquatic habitats to industrial and healthcare systems. Studies on sporobiota have been mainly focused on food processing and clinical fields, while a large amount of sporobiota exist in natural environments. Due to their persistence and capabilities of transmitting virulence factors and antibiotic resistant genes, environmental sporobiota could pose significant health risks to humans. These risks could increase as global warming and environmental pollution has altered the life cycle of sporobiota. This review summarizes the current knowledge of environmental sporobiota, including their occurrence, characteristics, and functions. An interaction network among clinical-, food-related, and environment-related sporobiota is constructed. Recent and effective methods for detecting and disinfecting environmental sporobiota are also discussed. Key problems and future research needs for better understanding and reducing the risks of environmental sporobiota and sporobiome are proposed.

Dual-response fluorescent probe based on nitrogen-doped carbon dots and europium ions hybrid for ratiometric and on-site visual determination of oxytetracycline and tetracycline

Tetracyclines residues, particularly oxytetracycline (OTC) and tetracycline (TC), have raised extensive concern because of their serious adverse effects on human health. Herein, a dual-response fluorescent probe based on nitrogen-doped carbon dots (N-CDs) and Eu³⁺ hybrid (N-CDs-Eu³⁺) was developed to selectively determine OTC and TC. The N-CDs act as ancillary ligands of Eu³⁺ and recognition units of OTC/TC, while the Eu³⁺ ions chelated with N-CDs can also specifically recognize OTC/TC. Upon inclusion of OTC/TC, an enhancement in Eu³⁺ emission occurs due to the energy transfer from OTC/TC to Eu³⁺ and the efficient elimination of quenching effect caused by H₂O molecule, which is attributed to the incorporation of N-CDs; while the blue fluorescence emitted by the N-CDs decreases under the inner filter effect and static quenching effect caused by OTC/TC. Based on the double and reverse response signals, the ratiometric detection of OTC and TC in the range of 0.1-45 μΜ and 0.1-30 μΜ is achieved with a detection limit of 0.017 and 0.041 μM, respectively. In addition, the noticeable variation in fluorescence color of the probe is integrated with a smartphone-assisted analysis device for the rapid on-site quantitative assay of OTC, where the detection limit is 0.15 μΜ. The results show that this probe performs with excellent specificity and anti-interference for both OTC and TC, and satisfactory detection results are obtained in lake water, milk, and honey samples, thereby confirming that the probe exhibits promising application in food safety and environmental monitoring.

Ultrarapid Microwave-Assisted Synthesis of Fluorescent Silver Coordination Polymer Nanoparticles and Its Application in Detecting Alkaline Phosphatase Activity

Fluorescent silver coordination polymer nanoparticles (Ag-TPA CPNs) were synthesized using a combination of terephthalic acid (TPA) and silver nitrate via an ultrarapid microwave-assisted strategy within 15 min. The Ag-TPA CPNs displayed a high fluorescent quantum yield (QY = 20.19%) and large Stokes shift (~200 nm), with two emission peaks at 490 nm and 520 nm under an excitation wavelength of 320 nm. A fluorescent "turn-off" method using fluorescent Ag-TPA CPNs was applied to detect the alkaline phosphatase (ALP) activity on the basis of the ALP-catalyzed hydrolysis of ascorbic acid 2-phosphate (AA2P) to ascorbic acid (AA), and the AA product triggered the reduction of Ag⁺ ions into silver nanoparticles. The fluorescent lifetime of Ag-TPA CPNs decreased from 3.93 ms to 3.80 ms after the addition of ALP, which suggests that this fluorescent "turn-off" detection of ALP activity is a dynamic quenching process. The fluorescent intensity had a linear relationship with the concentration of ALP in the range of 0.2-12 mU/mL (r = 0.991) and with a limit of detection (LOD) of 0.07 mU/mL. It showed high selectivity in ALP detection towards metal ions and amino acids, as well as other enzymes such as horseradish peroxidase, glucose oxidase, tyrosinase, trypsin, lysozyme, and superoxides. When it was applied for the fluorescent "turn-off" detection of ALP activity in serum samples, mean recovery levels ranging from 99.5% to 101.2% were obtained, with relative standard deviations (RSDs) lower than 4% accuracy. Therefore, it is an efficient and accurate tool for analyzing ALP levels in biosamples.

Detection of anthrax biomarker and metallic ions in aqueous media using spherical-shaped lanthanide infinite coordination polymers

We report a lanthanide-based infinite coordination polymer (ICP) system synthesized using pyrazole-3,5-dicarboxylic acid as linker, malonic acid as coordination modulator and water as solvent. The precursors self-assembly into microspherical particles, which are water-stable and exhibit excellent dispersibility. Bimetallic samples based on Tb³⁺ doped with Eu³⁺ were investigated as ratiometric dipicolinic acid (DPA) sensors, which is a biomarker for Bacillus anthracis spores. Along with the calibration curves, a detection in a real sample extracted from Bacillus subtilis (model organism) was performed. The samples proved to be highly sensitive and selective for ratiometric DPA detection. In a secondary study, the monometallic sample containing only Tb³⁺ was also investigated as a sensor for ionic species in aqueous media. The Cr³⁺, Fe³⁺, Cu²⁺, and Cr₂O₇^2- ionic species could be detected in water by luminescence quenching mechanism. Therefore, we found that the reported ICP system can be judiciously constructed in order to act as a multimodal probe for several chemical species.

Highly selective and multicolor ultrasensitive assay of dipicolinic acid: The integration of terbium(III) and gold nanocluster

A novel multicolor fluorescent nano-probe based on the hybridization of Tb³⁺ ion with gold nanoclusters (Au NCs) was synthesized to monitor and on-site visual assay of 2,6-pyridinedicarboxylic acid (DPA), a biomarker of bacterial spores. DPA can replace the water molecule in the center of Tb³⁺ and strongly coordinate with Tb³⁺ based on the analyte-triggered antenna effect. Simultaneously, the red fluorescence of Au NCs is not influenced after addition of DPA and can be used as steady inside fluorescence reference channel to measure background noise. On this basis, the multicolor fluorescence nano-probe based on Tb³⁺-doped Au NCs for fast analysis of DPA was fabricated. The linear range of this method is 0 to 12.5 μM and the limit of detection is 3.4 nM, which is well below the quantity of DPA concentration of 60 μM released by the spore transmission dose of anthrax infection. The proposed multicolor fluorescence nano-probe was successfully detecting DPA in actual sample with good sensitivity and specificity. In addition, the visual paper-based nano-probe is designed to detect DPA by using the color scanning application of smart phone. This developed platform possesses abroad application prospects with advantages of effective, convenient carrying, simple operation, good selectivity and repeatability.

Luminescent Properties of Phosphonate Ester-Supported Neodymium(III) Nitrate and Chloride Complexes

This study examines the synthesis of two geminal bisphosphonate ester-supported Ln³⁺ complexes [Ln(L3)₂(NO₃)₃] (Ln = Nd³⁺ (5), La³⁺ (6)) and optical properties of the neodymium(III) complex. These results are compared to known mono-phosphonate ester-based Nd³⁺ complexes [Nd(L1/L2)₃X₃]_n (X = NO₃^-, n = 1; Cl^-, n = 2) (1-4). The optical properties of Nd³⁺ compounds are determined by micro-photoluminescence (µ-PL) spectroscopy which reveals three characteristic metal-centered emission bands in the NIR region related to transitions from ⁴F_3/2 excited state. Additionally, two emission bands from ⁴F_5/2, ²H_9/2 → ⁴I_J (J = 11/2, 13/2) transitions were observed. PL spectroscopy of equimolar complex solutions in dry dichloromethane (DCM) revealed remarkably higher emission intensity of the mono-phosphonate ester-based complexes in comparison to their bisphosphonate ester congener. The temperature-dependent PL measurements enable assignment of the emission lines of the ⁴F_3/2 → ⁴I_9/2 transition. Furthermore, low-temperature polarization-dependent measurements of the transitions from R₁ and R₂ Stark sublevel of ⁴F_3/2 state to the ⁴I_9/2 state for crystals of [Nd(L3)₂(NO₃)₃] (5) are discussed.

Differential sensitization toward lanthanide metal-organic framework for detection of an anthrax biomarker

A novel Tb-doped Eu-based metal-organic framework (Eu-MOF@Tb) has been developed by incorporating hexanuclear europium cluster and 2,2'-bipyridine-5,5'-dicarboxylic acid as well as coordination with Tb(III). Owing to the diverse coordination status of Tb(III) and Eu(III) in MOF, antenna effect emission from Tb(III) can be invoked by dipicolinic acid (DPA), but the luminescence originating from Eu(III) remains unchanged. Taking advantage of this phenomenon, a ratiometric luminescent method for detection of DPA, a biomarker for Bacillus subtilis spores, was developed through differential sensitization toward lanthanide ions. This analysis method allowed for the detection of DPA in the 0.2-10 μM concentration range, with a detection limit of 60 nM. It was further validated by spiked recoveries (89.3-110%) of real-world samples with RSD values in the range 3.9-11%. Alongside this, a paper indicator test was prepared for naked-eye detection of DPA via a dose-sensitive color evolution from red to green under UV light. The effectiveness of the proposed approach was explored in the detection of bacterial spores in real biological and environmental samples and indicated great potential for applications as a real-time monitoring system against the anthrax threat.

Ion exchange fabrication of lanthanide functionalized layered double hydroxides microcapsules for rapid and visual detection of anthrax biomarker

Lanthanide ion probes have recently been considered as promising sensing materials due to their high sensitivity and good optical properties. Herein, the 3D hierarchical lanthanide functionalized layered double hydroxides microcapsules were synthesized via a facile ion exchange strategy and further developed as novel fluorescent probes for detecting trace amounts of the anthrax biomarker dipicolinicacid (DPA). Benefiting from the 3D porous superstructure and abundant unsaturated coordination sites of lanthanide ion, the ternary Ni-Fe-Ln-LDHs (Ln = Tb/Eu) not only possess a large reactive contact area to improve the sensitivity of DPA detection, but also demonstrate very fast reaction rate. The design of inexpensive fluorescent test strips can perform the on-site and real-time detection via a smartphone with a color recognition application. More prominently, the sensitivity of the system was evaluated by actual spore samples with the detection limit as low as 3.54 × 10⁴ spores/mL. The 3D lanthanide functionalized LDHs nanoprobe constructed by ion exchange exhibits a new vision for the development of a sensing platform in other research areas.

Dye-sensitized lanthanide containing nanoparticles for luminescence based applications

Due to their exceptional luminescent properties, lanthanide (Ln) complexes represent a unique palette of probes in the spectroscopic toolkit. Their extremely weak brightness due to forbidden Ln electronic transitions can be overcome by indirect dye-sensitization from the antenna effect brought by organic ligands. Despite the improvement brought by the antenna effect, (bio)analytical applications with discrete Ln complexes as luminescent markers still suffers from low sensitivity as they are limited by the complex brightness. Thus, there is a need to develop nano-objects that cumulate the spectroscopic properties of multiple Ln ions. This review firstly gives a brief introduction of the spectral properties of lanthanides both in complexes and in nanoparticles (NPs). Then, the research progress of the design of Ln-doped inorganic NPs with capping antennas, Ln-complex encapsulated NPs and Ln-complex surface functionalized NPs is presented along with a summary of the various photosensitizing ligands and of the spectroscopic properties (excited-state lifetime, brightness, quantum yield). The review also emphasizes the problems and limitations encountered over the years and the solutions provided to address them. Finally, a comparison of the advantages and drawbacks of the three types of NP is provided as well as a conclusion about the remaining challenges both in the design of brighter NPs and in the luminescence based applications.

Recent advances in airborne pathogen detection using optical and electrochemical biosensors

The world is currently facing an adverse condition due to the pandemic of airborne pathogen SARS-CoV-2. Prevention is better than cure; thus, the rapid detection of airborne pathogens is necessary because it can reduce outbreaks and save many lives. Considering the immense role of diverse detection techniques for airborne pathogens, proper summarization of these techniques would be beneficial for humans. Hence, this review explores and summarizes emerging techniques, such as optical and electrochemical biosensors used for detecting airborne bacteria (Bacillus anthracis, Mycobacterium tuberculosis, Staphylococcus aureus, and Streptococcus pneumoniae) and viruses (Influenza A, Avian influenza, Norovirus, and SARS-CoV-2). Significantly, the first section briefly focuses on various diagnostic modalities applied toward airborne pathogen detection. Next, the fabricated optical biosensors using various transducer materials involved in colorimetric and fluorescence strategies for infectious pathogen detection are extensively discussed. The third section is well documented based on electrochemical biosensors for airborne pathogen detection by differential pulse voltammetry, cyclic voltammetry, square-wave voltammetry, amperometry, and impedance spectroscopy. The unique pros and cons of these modalities and their future perspectives are addressed in the fourth and fifth sections. Overall, this review inspected 171 research articles published in the last decade and persuaded the importance of optical and electrochemical biosensors for airborne pathogen detection.

Portable visual assay of Bacillus anthracis biomarker based on ligand-functionalized dual-emission lanthanide metal-organic frameworks and smartphone-integrated mini-device

A single-functionalized ligand single-Ln³⁺ based dual-emission Ln-MOF fluorescent sensor was established for portable and visual dipicolinic acid (DPA, Bacillus anthracis biomarker) detection. First, a theory calculation-based prediction model was developed for designing single-functionalized ligand single-Ln³⁺ dual-emission Ln-MOFs. The model consisted of three calculation modules: intramolecular hydrogen bonds, excited state energy levels, and coordination stability with Ln³⁺ of ligands. Tb³⁺ and Eu³⁺ were selected as metal luminescence centers, PTA-X (PTA: p-phthalic acid, X = NH₂, CH₃, H, OH) with different functional groups as one-step functionalization ligands, and the luminescent feature of four Tb-MOFs and four Eu-MOFs was predicted with the model. Coupled with prediction results and experimental verification results, Tb-PTA-OH was rapidly determined to be the sole dual-emission Ln-MOF. Then, Tb-PTA-OH was applied to DPA detection by ratiometric fluorescence, and an ultra-low limit of detection (13.4 nM) was obtained, which is much lower than the lowest anthrax infectious dose (60 μM). A portable visual assay method based on paper-microchip and smartphone integrated mini-device was further established (limit of qualification 0.48 μM). A new sensing mechanism and a "triple gates" selectivity mechanism to DPA were proposed. This work reveals guidelines for material design and mini-device customization in detecting hazardous substances.

Guanine Analogue-Based Assemblies: Construction and Luminescence Functions

As one of the natural nucleobases, guanine has attracted increasing interest in molecular self-assembly science because of its abundant interaction sites and high electron cloud density. Guanines, guanine derivatives, and guanine-rich DNA sequence are able to self-assemble into versatile aggregate structures by the means of hydrogen bonds and π-π, ion-dipole, solvophobic, and electrostatic interactions. Recent advances have shown that many guanine analogue-based (G-based) luminescent aggregates exhibit promising applications for fluorescent and chemiluminescent sensing and circularly polarized luminescence (CPL). This perspective summarizes the state-of-art strategies for constructing G-based assemblies and presents representative examples for luminescence functions. Finally, the inspirations are provided for exploiting unique G-based systems and luminescent G-based assemblies.

Rapid and Reliable Excitation Wavelength-Dependent Detection of 2,6-Dipicolinic Acid Based on a Luminescent Cd(II)-Tb(III) Nanocluster

A Cd(II)-Tb(III) nanocluster {[Cd₁₀Tb₉L₈(OH)₁₆(OAc)₂₃(H₂O)₃][Cd₁₀Tb₉L₈(OH)₁₆(OAc)₂₃(H₂O)₄]}·3H₂O (1), which contains two crystallographically independent components, was constructed from a tridentate ligand (HL, 3-ethoxysalicylaldehyde). It exhibits rapid and reliable excitation wavelength-dependent luminescence response to 2,6-dipicolinic acid (DPA) [limit of detection = 0.23 nM], which is not influenced by aromatic carboxylates, amino acids, and ions. The test papers of 1 can be used to check DPA in solution. The equation I_Ex272nm/I_Ex329nm = 0.0109 × [DPA]2 + 0.106 × [DPA] + 2.39 of 1 for the luminescence response could be used to quantitatively measure the concentration of DPA in tap water. 1 displays rapid and stable luminescence response to DPA, with the sensing times shorter than 5 s and no changes for the lanthanide luminescence over 24 h.

Synthesis of a cerium-based nanomaterial with superior oxidase-like activity for colorimetric determination of glutathione in food samples

Enzyme-like nanomaterials have received significant attention for their high stability and low cost. However, most nanomaterials require complicated synthesis processes, limiting the range of their potential applications. In this study, a novel cerium-based nanomaterial was fabricated in a facile manner from a mixture of dipicolinic acid (DPA), guanosine 5'-monophosphate (GMP), and cerium acetate under ambient conditions. The obtained nanomaterial, designated as DPA-Ce-GMP, exhibited superior oxidase-like activity owing to the mixed valence (Ce³⁺/Ce⁴⁺) of cerium ions. DPA-Ce-GMP efficiently catalyzed the oxidation of 3,3,5,5-tetramethylbenzidine (TMB), achieving a color reaction without requiring hydrogen peroxide. Thus, DPA-Ce-GMP was incorporated into a simple, rapid, and sensitive colorimetric sensor for glutathione (GSH) detection. Within this sensor, TMB oxidation is inhibited by the reducibility of GSH. The sensor exhibits a linear response over two concentration ranges (0.05-10 and 10-40 μM), and its detection limit is 17.1 nM (3σ/slope). The proposed sensor was successfully applied to GSH quantification in food samples. The developed sensor provides an efficient biomimic oxidase for GSH detection in real samples. Facile approach to prepare cerium-based nanomaterial with superior oxidase-like activity for colorimetric detection of glutathione in food samples.

A ratiometric fluorescent sensor made of a terbium coordination polymer for the anthrax biomarker 2,6-dipicolinic acid with on-site detection assisted by a smartphone app

Tb-NDBC is a quantitative ratiometric fluorescence sensor for DPA detection with high sensitivity and selectivity, a rapid response, and durability.

Three novel metal-organic frameworks with different coordination modes for trace detection of anthrax biomarkers

Dipicolinic acid (DPA) is an anthrax biomarker. Its serious consequences make its detection a great need. In this paper, three novel metal-organic frameworks (MOFs) with different coordination modes were synthesized by a simple solvothermal method, which can be used as highly efficient fluorescence sensors for the highly selective and sensitive trace detection of DPA. MOFs 1-3 showed rapid responses to DPA (<30 s), and the limits of detection (LODs) were calculated to be 1.01 × 10^-6 M^-1 (MOF 1), 1.17 × 10^-6 M^-1 (MOF 2) and 2.07 × 10^-6 M^-1 (MOF 3). DPA detection based on MOFs 1-3 in fetal bovine serum is highly reliable based on the high recovery rates (90% to 115%). Hence, the three MOF-based sensors can be used in the real-time detection of DPA.

Programmable-Printing Paper-Based Device with a MoS2 NP and Gmp/Eu-Cit Fluorescence Couple for Ratiometric Tetracycline Analysis in Various Natural Samples

Paper-based fluorescence devices, with smartphone aids, bring considerable operation convenience for tetracycline (TC) sensing. Nevertheless, they must meet the challenge in real determination against complicated backgrounds. Considering that, we present a programmable-printing paper-based device and then apply it to TC determination for various natural samples. MoS₂ NPs and Gmp/Eu-Cit are synthetized as composite probes. A static quenching process is found with MoS₂ NP fluorescence at 430 nm, while significant magnification of Gmp/Eu-Cit emission is obtained at 617 nm, establishing a valuable ratiometric indicator. Remarkably, two-stage programmable printing maximizes the proposed sensing capability. A transitive device, containing a gradually changing amount of a certain probe, is prepared to sense TC. With a homemade smartphone application and 3D-printed measurement chamber, the corresponding signals are examined to explore optimal setups. These setups are automatically processed to prepare the final-version device, not requiring manual operations. Benefitting from this interesting feature, the proposed device gains many rewards in performances. It effectively senses TC in a wide range from 12.7 nM to 80 μM and simultaneously provides naked eye-legible signals and smartphone-based readouts with confident selectivity and stability. This device is consequently applied for various samples of soil, river water, milk, and serum and meets well with HPLC-MS and recovery tests.

Lab-on-a-ZnO-Submicron-Particle Sensor Array for Monitoring AD upon Cd2+ Exposure with CSF Tau441% as an Effective Hallmark

In this study, based on the posttreatment strategy, blue-color-emissive ZnO submicron particles (B-ZnO SMPs) and red-color-emissive ZnO submicron particles (R-ZnO SMPs) were obtained from rationally designed Zn-infinite coordination polymer (ICP) precursors. After modification of thiol-containing aptamers, diverse spectral changes in the ultraviolet and visible regions of B- and R-ZnO SMPs toward different tau species were explored to construct a lab-on-a-ZnO-submicron-particle sensor array. Assisted by principal component analysis (PCA), the unique fingerprints of the sensor array enabled the simultaneous differentiation and quantitative detection of different tau species (tau381, tau410, and tau441) for the first time. Furthermore, the dynamic changes of tau441% (the ratio of the two most reported representative 4R isoform (full-length tau441) and 3R isoform (tau381)) in cerebrospinal fluid (CSF) during the Alzheimer's disease (AD) onset of Cd²⁺-exposed rats could also be monitored by the lab-on-a-ZnO-submicron-particle sensor array, which was supposed to be an effective hallmark and highly correlated with the formation of neurofibrillary tangles (NFTs). This study not only provides a further insight into the involvement of subchronic Cd²⁺ exposure in the tau etiology of AD but also offers more comprehensive and effective information about the asymptomatic stage of AD upon environmental risk, which has potential applications in the early diagnosis and therapy.

Ratiometric fluorescent detection of dipicolinic acid as an anthrax biomarker based on a high-nuclearity Yb18 nanoring

An 18-metal lanthanide nanoring [Yb₁₈(L¹)₈(HL²)₂(OAc)₂₀(MeOH)₈(EtOH)₆(H₂O)₄] (1), which shows a ratiometric fluorescent response to DPA, was constructed through the strategy of using two types of polydentate organic ligands. The addition of DPA increases the visible ligand-centered emission, but decreases the NIR lanthanide luminescence of 1. The limit of luminescent detection of 1 for DPA is 1.5 μM. The high fluorescence sensitivity of 1 to DPA is not affected by the existence of interferents such as aromatic carboxylates and ions.

Insights on Luminescent Micro- and Nanospheres of Infinite Coordination Polymers

Coordination polymers have been extensively studied in recent years. Some of these materials can exhibit several properties such as permanent porosity, high surface area, thermostability and light emission, as well as open sites for chemical functionalization. Concerning the fact that this kind of compounds are usually solids, the size and morphology of the particles are important parameters when an application is desired. Inside this context, there is a subclass of coordination polymers, named infinite coordination polymers (ICPs), which auto-organize as micro- or nanoparticles with low crystallinity. Specifically, the particles exhibiting spherical shapes and reduced sizes can be better dispersed, enter cells much easier than bulk crystals and be converted to inorganic materials by topotactic transformation. Luminescent ICPs, in particular, can find applications in several areas, such as sensing probes, light-emitting devices and bioimaging. In this review, we present the state-of-the-art of ICP-based spherical particles, including the growth mechanisms, some applications for luminescent ICPs and the challenges to overcome in future commercial usage of these materials.

Eu(III)-DO3A and BODIPY dyad as a chemosensor for anthrax biomarker

The sensitive and selective determination of Bacillus anthracis spores before the infection is vital for human health and safety. Dipicolinic acid (DPA) is an excellent biomarker due to its presence in the nucleus of bacterial spores at high concentrations (up to 1 M, about 15% dry weight). In the present work, a new molecular chemosensor 1, based on europium(III)-DO3A and BODIPY dyad, is developed to detect DPA in phosphate-buffered saline (PBS) buffered solution and tap water samples. Also, 1 can be used as a ratiometric optical chemosensor to track DPA.

A carbon dot doped lanthanide coordination polymer nanocomposite as the ratiometric fluorescent probe for the sensitive detection of alkaline phosphatase activity

The development of sensitive methods for alkaline phosphatase (ALP) activity analysis is an important analytical topic. Based on the stimulus-responsive lanthanide coordination polymer, a simple ratiometric fluorescence sensing strategy was proposed to detect ALP activity. A carbon dot (CD) doped fluorescent supramolecular lanthanide coordination polymer (CDs@Tb-GMP) was prepared with Tb³⁺ and the ligand guanine single nucleotide (GMP). To construct a ratiometric fluorescence biosensor, the fluorescence of Tb-GMP was used as a response signal, and the fluorescence of CDs was used as a reference signal due to its good stability. When excited at 290 nm, the polymer network Tb-GMP emits characteristic fluorescence at 545 nm, while the CDs encapsulated in the polymer network emit fluorescence at 370 nm. After adding ALP to the system, the substrate GMP can be hydrolyzed by ALP, resulting in the destruction of the polymer network. Accordingly, the fluorescence of Tb-GMP significantly decreased, while the fluorescence of CDs slightly increased due to their release from the polymer network. By comparing the relationship between the fluorescence intensity ratio of the two signals and the concentration of ALP, sensitive detection of ALP could be achieved with the linear range from 0.5 to 80 U L^-1 and a detection limit of 0.13 U L^-1. Furthermore, the proposed ratiometric sensing system was applied to the detection of ALP in human serum samples with desirable results, indicating potential application in clinical diagnosis.

Ratiometric fluorescence detection of anthrax biomarker based on terbium (III) functionalized graphitic carbon nitride nanosheets

Detection of anthrax biomarker dipicolinic acid (DPA) is of great importance upon the crisis of bioterrorism. Development of fluorescent materials for DPA detection, particularly one that fully depends on single luminescent response, faces the challenge of being susceptible to interferences. The accompanying accuracy problems offer great opportunities for the establishment of more reliable ratiometric analysis method. Herein, a ratiometric fluorescent probe based on terbium functionalized graphitic carbon nitride nanosheets (Tb-g-C₃N₄NS) is attempted for quantitative detection of DPA to address the distinct function of g-C₃N₄NS as both carrier and reference fluorophore, which is a so-far unexplored option in fluorescent detection approaches. We achieve the incorporation of Tb³⁺ into framework of g-C₃N₄NS by using a simple synthetic strategy comprised of thermal pyrolysis and ultrasonic exfoliation. Combining the reference signal over g-C₃N₄NS at 440 nm (I₄₄₀) with the response signal of Tb³⁺ at 546 nm (I₅₄₆), concentration of DPA can be easily calculated via its linear correlation with the intensity ratio (I₅₄₆/I₄₄₀), giving a precise measurement towards DPA with a detection limit as low as 9.9 nM. Besides enabling an excellent self-calibrating detection of DPA, this work also inspires broader use of g-C₃N₄NS for relevant process.

Multi-emission metal-organic framework composites for multicomponent ratiometric fluorescence sensing: recent developments and future challenges

Ratiometric fluorescence sensors that are achieved via the ratiometric fluorescence intensity changes of emission peaks based on multi-emission fluorescence probes show a huge advantage. However, the preparation of these multi-emission fluorescence probes is a key challenge, as it is related to having more fluorescence groups with the same excitation but different emission wavelengths, and their assembly is not a simple mixing process. More fluorescent groups or molecules can be assembled into the multi-emission fluorescence probe by covalent bonds and coordination interactions, or by loading in metal-organic frameworks (MOFs). MOFs are excellent candidates for constructing complexes with the capability of multicomponent ratiometric fluorescence sensing, but there are some problems that need to be considered. For example, not all fluorophores can be stably loaded in the MOFs' pores, usually due to the size, surface charge and intrinsic properties of the fluorophore. In turn, it is also related to the structure of the MOF, metal nodes, and properties of the organic ligands. This review first introduces the advantages of the MOF-based multi-component fluorescence sensors, and then discusses the synthesis, classification and application of fluorescent MOFs or MOF composites for multi-component ratiometric fluorescence detection. Particular emphasis is focused on the potential, types and characteristics for sensing and biological applications, and the main challenges and limitations are further explored. This review might be helpful for those researchers interested in the application of multi-component ratiometric fluorescence sensing based on fluorescent MOFs or MOF composites.

Highlights of the development and application of luminescent lanthanide based coordination polymers, MOFs and functional nanomaterials

The development of lanthanide based coordination polymer and metal-organic framework (CPs and MOFs) nanomaterials as novel functional (e.g. luminescent and magnetic) materials has attracted significant attention in recent times. This is in part due to the wide, but yet unique coordination requirements that the f-metal ions possess, as well as their attractive physical properties, which are often transferred to the bulk material. Hence, there is no surprise, that the design, synthesis and characterisation of lanthanide based CP/MOF materials (featuring either 'pure' lanthanides, or a mixture of both f- and d-metal ions) for applications in gas and small molecule absorption, storage, conversion/catalysis, chemical sensing, bio-imaging, drug delivery, etc. has been a prominent feature in the scientific literature. In this review, we give a selected overview of some of the recent developments in the area of Ln CP/MOF based nanomaterials for sensing, optical materials and bio-medicine research, as well as making reference to some more established examples, with the view of introducing, particularly to new researchers to the field, the powerful and attractive features of lanthanide based materials.

A smartphone-integrated multicolor fluorescence probe of bacterial spore biomarker: The combination of natural clay material and metal-organic frameworks

The metal-organic frameworks (MOFs) functionalized palygorskite (Pal) hybrid as a novel multicolor fluorescence probe for the detection of bacterial spore biomarker-dipicolinic acid (DPA), had been prepared via in-situ growth. The MOFs can effectively encapsulate dye molecules on the surface of Pal, and the rich carboxyl groups on its surface can coordinate with europium ions (Eu³⁺), forming a highly sensitive recognition group. The results indicated that the limit of detection (LOD) of this multicolor fluorescence probe was as low as 9.3 nM and was obviously lower than the amount of anthrax spores infecting the human body (60 μM). Moreover, a wide linear range from 0 to 35 μM was obtained. The high specific surface area of Pal, as well as the permanent porosity and suitable binding sites of Eu³⁺-doped MOFs may play a major role in the sensitivity and linear detection range. The multicolor fluorescence strategy made full use of the diversity of fluorescence signals collected by dye molecules and lanthanide ions, which can realize the real-time and on-site detection through the smartphone with a color-scanning application (APP). The practicability of this probe was further verified by detecting DPA released by non-infectious Bacillus subtilis.