Colloidal Phase-Change Materials: Synthesis of Monodisperse GeTe Nanoparticles and Quantification of Their Size-Dependent Crystallization

Heavy-Metal-Free Colloidal Quantum Dots: Progress and Opportunities in Solar Technologies

Colloidal quantum dots (QDs) hold great promise as building blocks in solar technologies owing to their remarkable photostability and adjustable properties through the rationale involving size, atomic composition of core and shell, shapes, and surface states. However, most high-performing QDs in solar conversion contain hazardous metal elements, including Cd and Pb, posing significant environmental risks. Here, a comprehensive review of heavy-metal-free colloidal QDs for solar technologies, including photovoltaic (PV) devices, solar-to-chemical fuel conversion, and luminescent solar concentrators (LSCs), is presented. Emerging synthetic strategies to optimize the optical properties by tuning the energy band structure and manipulating charge dynamics within the QDs and at the QDs/charge acceptors interfaces, are analyzed. A comparative analysis of different synthetic methods is provided, structure-property relationships in these materials are discussed, and they are correlated with the performance of solar devices. This work is concluded with an outlook on challenges and opportunities for future work, including machine learning-based design, sustainable synthesis, and new surface/interface engineering.

Solution Synthesis of NdTe3 Magnetic Nanosheets

Neodymium tritelluride is a layered van der Waals material, with correlated electronic properties including high electronic mobility, charge density waves, and antiferromagnetism. We developed a solution synthesis method to form free-standing nanosheets of NdTe3, with nanosheet lateral dimensions of 200-400 nm. The morphology of the nanosheet was influenced by the neodymium precursor. When Nd[(N(SiMe3)2]3 was used as the metal source the nanosheet thickness average was 12 ± 2.5 nm, alternatively the combination of NdCl3 and Li(N(SiMe3)2) led to thicker nanosheets, approximately 19 ± 2.4 nm. We believe that the difference in thickness and changes in surface chemistry point to the role of chloride in accelerating nanocrystal growth for the synthesis with NdCl3 (and Li(N(SiMe3)2). Both types of nanosheets exhibit charge density wave (CDW) distortions as measured using electron diffraction and investigated using variable temperature Raman scattering. Interestingly, the magnetic studies suggest a distinct change in properties between 12 and 19 nm thickness in antiferromagnetic NdTe3.

Phase-Controlled Synthesis and Phase-Change Properties of Colloidal Cu-Ge-Te Nanoparticles

Phase-change memory (PCM) technology has recently attracted a vivid interest for neuromorphic applications, in-memory computing, and photonic integration due to the tunable refractive index and electrical conductivity between the amorphous and crystalline material states. Despite this, it is increasingly challenging to scale down the device dimensions of conventionally sputtered PCM memory arrays, restricting the implementation of PCM technology in mass applications such as consumer electronics. Here, we report the synthesis and structural study of sub-10 nm Cu-Ge-Te (CGT) nanoparticles as suitable candidates for low-cost and ultrasmall PCM devices. We show that our synthesis approach can accurately control the structure of the CGT colloids, such as composition-tuned CGT amorphous nanoparticles as well as crystalline CGT nanoparticles with trigonal α-GeTe and tetragonal Cu2GeTe3 phases. In situ characterization techniques such as high-temperature X-ray diffraction and X-ray absorption spectroscopy reveal that Cu doping in GeTe improves the thermal properties and amorphous phase stability of the nanoparticles, in addition to nanoscale effects, which enhance the nonvolatility characteristics of CGT nanoparticles even further. Moreover, we demonstrate the thin-film fabrication of CGT nanoparticles and characterize their optical properties with spectroscopic ellipsometry measurements. We reveal that CGT nanoparticle thin films exhibit a negative reflectivity change and have good reflectivity contrast in the near-IR spectrum. Our work promotes the possibility to use PCM in nanoparticle form for applications such as electro-optical switching devices, metalenses, reflectivity displays, and phase-change IR devices.

Correlating semiconductor nanoparticle architecture and applicability for the controlled encoding of luminescent polymer microparticles

Luminophore stained micro- and nanobeads made from organic polymers like polystyrene (PS) are broadly used in the life and material sciences as luminescent reporters, for bead-based assays, sensor arrays, printable barcodes, security inks, and the calibration of fluorescence microscopes and flow cytometers. Initially mostly prepared with organic dyes, meanwhile luminescent core/shell nanoparticles (NPs) like spherical semiconductor quantum dots (QDs) are increasingly employed for bead encoding. This is related to their narrower emission spectra, tuneability of emission color, broad wavelength excitability, and better photostability. However, correlations between particle architecture, morphology, and photoluminescence (PL) of the luminescent nanocrystals used for encoding and the optical properties of the NP-stained beads have been rarely explored. This encouraged us to perform a screening study on the incorporation of different types of luminescent core/shell semiconductor nanocrystals into polymer microparticles (PMPs) by a radical-induced polymerization reaction. Nanocrystals explored include CdSe/CdS QDs of varying CdS shell thickness, a CdSe/ZnS core/shell QD, CdSe/CdS quantum rods (QRs), and CdSe/CdS nanoplatelets (NPLs). Thereby, we focused on the applicability of these NPs for the polymerization synthesis approach used and quantified the preservation of the initial NP luminescence. The spectroscopic characterization of the resulting PMPs revealed the successful staining of the PMPs with luminescent CdSe/CdS QDs and CdSe/CdS NPLs. In contrast, usage of CdSe/CdS QRs and CdSe QDs with a ZnS shell did not yield luminescent PMPs. The results of this study provide new insights into structure-property relationships between NP stained PMPs and the initial luminescent NPs applied for staining and underline the importance of such studies for the performance optimization of NP-stained beads.

Recent advances in photoelectrochemical hydrogen production using I-III-VI quantum dots

Photoelectrochemical (PEC) water splitting, recognized for its potential in producing solar hydrogen through clean and sustainable methods, has gained considerable interest, particularly with the utilization of semiconductor nanocrystal quantum dots (QDs). This minireview focuses on recent advances in PEC hydrogen production using I-III-VI semiconductor QDs. The outstanding optical and electrical properties of I-III-VI QDs, which can be readily tuned by modifying their size, composition, and shape, along with an inherent non-toxic nature, make them highly promising for PEC applications. The performance of PEC devices using these QDs can be enhanced by various strategies, including ligand modification, defect engineering, doping, alloying, and core/shell heterostructure engineering. These approaches have notably improved the photocurrent densities for hydrogen production, achieving levels comparable to those of conventional heavy-metal-based counterparts. Finally, this review concludes by addressing the present challenges and future prospects of these QDs, underlining crucial steps for their practical applications in solar hydrogen production.

A Multistate Thermoresponsive Smart Window Based on a Multifunctional Luminescent Solar Concentrator

Conventional luminescent solar concentrators (LSCs) usually only have the ability to absorb solar energy and convert it to electricity but are not able to regulate the transmitted light. Herein, a multistate thermoresponsive smart window (SW) based on LSC has been fabricated, in which the stimuli-responsive host layer consists of polydimethylsiloxane (PDMS) and ethylene glycol solution (EGS) microdroplets stacking with LSC layer-based on near-infrared (NIR) CuInSe2-xSx/ZnS core/shell quantum dots (QDs) and PDMS matrix. As-synthesized CISSe/ZnS QDs with broad NIR absorption in LSC exhibit controllable emission spectra over 833-1088 nm and high photoluminescence (PL) quantum yield from 45 to 83%. Coupling with Si solar cells as a reference, optimized LSC-SW devices with dimensions of 5 × 5 × 0.9 cm3 exhibit higher power conversion efficiency (PCE) of 1.19-1.36% with increased temperature from 0 to 50 °C than those of sole LSC and SW devices. The corresponding visible light transmissions are regulated from 75.1 to 48.1% accordingly. The improvement of PCEs in an opaque state is mainly due to enhanced absorption of QDs originating from rescattered photons from the EGS/PDMS layer, leading to more emitted photons reaching photovoltaics. This work is expected to bring up new opportunities for applications in greenhouses, building facades, and energy-efficient smart windows.

Nanomaterials for light-mediated therapeutics in deep tissue

Light-mediated therapeutics, including photodynamic therapy, photothermal therapy and light-triggered drug delivery, have been widely studied due to their high specificity and effective therapy. However, conventional light-mediated therapies usually depend on the activation of light-sensitive molecules with UV or visible light, which have poor penetration in biological tissues. Over the past decade, efforts have been made to engineer nanosystems that can generate luminescence through excitation with near-infrared (NIR) light, ultrasound or X-ray. Certain nanosystems can even carry out light-mediated therapy through chemiluminescence, eliminating the need for external activation. Compared to UV or visible light, these 4 excitation modes penetrate more deeply into biological tissues, triggering light-mediated therapy in deeper tissues. In this review, we systematically report the design and mechanisms of different luminescent nanosystems excited by the 4 excitation sources, methods to enhance the generated luminescence, and recent applications of such nanosystems in deep tissue light-mediated therapeutics.

One-pot synthesis of Ag-In-Ga-S nanocrystals embedded in a Ga2O3 matrix and enhancement of band-edge emission by Na+ doping

I-III-VI-based semiconductor quantum dots (QDs) have been intensively explored because of their unique controllable optoelectronic properties. Here we report one-pot synthesis of Na-doped Ag-In-Ga-S (AIGS) QDs incorporated in a Ga2O3 matrix. The obtained QDs showed a sharp band-edge photoluminescence peak at 557 nm without a broad-defect site emission. The PL quantum yield (QY) of such QDs was 58%, being much higher than that of AIGS QDs without Na+ doping, 29%. The obtained Na-doped AIGS/Ga2O3 composite particles were used as an emitting layer of green QD light-emitted diodes. A sharp electroluminescence (EL) peak was observed at 563 nm, being similar to that in the PL spectrum of the QDs used. The external quantum efficiency of the device was 0.6%.

Synthesis and hybridization of CuInS2 nanocrystals for emerging applications

Copper indium sulfide (CuInS2) is a ternary A(I)B(III)X(VI)2-type semiconductor featuring a direct bandgap with a high absorption coefficient. In attempts to explore their practical applications, nanoscale CuInS2 has been synthesized with crystal sizes down to the quantum confinement regime. The merits of CuInS2 nanocrystals (NCs) include wide emission tunability, a large Stokes shift, long decay time, and eco-friendliness, making them promising candidates in photoelectronics and photovoltaics. Over the past two decades, advances in wet-chemistry synthesis have achieved rational control over cation-anion reactivity during the preparation of colloidal CuInS2 NCs and post-synthesis cation exchange. The precise nano-synthesis coupled with a series of hybridization strategies has given birth to a library of CuInS2 NCs with highly customizable photophysical properties. This review article focuses on the recent development of CuInS2 NCs enabled by advanced synthetic and hybridization techniques. We show that the state-of-the-art CuInS2 NCs play significant roles in optoelectronic and biomedical applications.

Breaking AgInTe2 Quantum Dot Chain to Fabricate AgInTe2-ZnS Janus Nanocrystals

Colloidal multinary chalcogenides (MnCs) have emerged as excellent optoelectronic materials, where S- and Se-based MnCs show considerable progress; however, the Te counterpart suffers from detrimental surface oxidation. Moreover, Te-based I-III-VI MnCs (e.g., AgInTe2) tend to form a one-dimensional (1-D) anisotropic structure via the self-assembly of surface-oxidized Te, thus restricting the isolation of AgInTe2 quantum dots (QDs). We report successful control of the self-assembly of Te-based MnCs to arrest the growth of AgInTe2 QDs by using a synergistic capping agent (dodecanethiol and oleic acid). The reaction proceeds with several intermediates, including hexagonal microrods (MR), tetragonal QDs in a chain arrangement, and tetragonal MRs. Importantly, we note that the incorporation of ZnS QDs triggers the breaking of the chain arrangement of the AgInTe2 QDs and the emergence of evenly distributed AgInTe2-ZnS Janus nanocrystals with significantly reduced long-term Te-oxidative properties. Arresting the AgInTe2 QD chain and the subsequent Janus nanocrystal formation could have promising opportunities for 1-D charge hopping and efficient charge transport for optoelectronic applications, respectively.

Selected I-III-VI2 Semiconductors: Synthesis, Properties and Applications in Photovoltaic Cells

I-III-VI2 group quantum dots (QDs) have attracted high attention in photoelectronic conversion applications, especially for QD-sensitized solar cells (QDSSCs). This group of QDs has become the mainstream light-harvesting material in QDSSCs due to the ability to tune their electronic properties through size, shape, and composition and the ability to assemble the nanocrystals on the surface of TiO2. Moreover, these nanocrystals can be produced relatively easily via cost-effective solution-based synthetic methods and are composed of low-toxicity elements, which favors their integration into the market. This review describes the methods developed to prepare I-III-VI2 QDs (AgInS2 and CuInS2 were excluded) and control their optoelectronic properties to favor their integration into QDSSCs. Strategies developed to broaden the optoelectronic response and decrease the surface-defect states of QDs in order to promote the fast electron injection from QDs into TiO2 and achieve highly efficient QDSSCs will be described. Results show that heterostructures obtained after the sensitization of TiO2 with I-III-VI2 QDs could outperform those of other QDSSCs. The highest power-conversion efficiency (15.2%) was obtained for quinary Cu-In-Zn-Se-S QDs, along with a short-circuit density (JSC) of 26.30 mA·cm-2, an open-circuit voltage (VOC) of 802 mV and a fill factor (FF) of 71%.

Extensive emission tuning and characterization of highly efficient CuInS2 quantum dots for white light-emitting diodes

Whole visible range emitting CuInS2/ZnS QDs were obtained with broad band-width and high luminous efficiency by altering the Cu/In ratio and coating ZnS layer. 1-Dodecanethiol (DDT) as a sulfur source in the ZnS coating process can inhibit the lattice defects caused by Zn2+ inter-diffusion, thus increasing the photoluminescence quantum yield (PL QY). Then the stability and lighting performance of white light-emitting diodes (WLEDs) based on these CuInS2/ZnS QDs were characterized. The optimized WLED device exhibited a moderate luminous efficacy (LE) (70.33 lm·W-1) and ultrahigh color qualities (CRI Ra = 92.7, R9 = 95.9, R13 = 96.3) with warm white at a correlated color temperature (CCT) of 4052 K.

Synthesis and Electronic Structure of Mid-Infrared Absorbing Cu3SbSe4 and CuxSbSe4 Nanocrystals

Aliovalent I-V-VI semiconductor nanocrystals are promising candidates for thermoelectric and optoelectronic applications. Famatinite Cu3SbSe4 stands out due to its high absorption coefficient and narrow band gap in the mid-infrared spectral range. This paper combines experiment and theory to investigate the synthesis and electronic structure of colloidal CuxSbSe4 nanocrystals. We achieve predictive composition control of size-uniform CuxSbSe4 (x = 1.9-3.4) nanocrystals. Density functional theory (DFT)-parametrized tight-binding simulations on nanocrystals show that the more the Cu-vacancies, the wider the band gap of CuxSbSe4 nanocrystals, a trend which we also confirm experimentally via FTIR spectroscopy. We show that SbCu antisite defects can create mid-gap states, which may give rise to sub-bandgap absorption. This work provides a detailed study of CuxSbSe4 nanocrystals and highlights the potential opportunities as well as challenges for their application in infrared devices.

Influence of nanoparticle encapsulation and encoding on the surface chemistry of polymer carrier beads

Surface-functionalized polymer beads encoded with molecular luminophores and nanocrystalline emitters such as semiconductor nanocrystals, often referred to as quantum dots (QDs), or magnetic nanoparticles are broadly used in the life sciences as reporters and carrier beads. Many of these applications require a profound knowledge of the chemical nature and total number of their surface functional groups (FGs), that control bead charge, colloidal stability, hydrophobicity, and the interaction with the environment and biological systems. For bioanalytical applications, also the number of groups accessible for the subsequent functionalization with, e.g., biomolecules or targeting ligands is relevant. In this study, we explore the influence of QD encoding on the amount of carboxylic acid (COOH) surface FGs of 2 µm polystyrene microparticles (PSMPs). This is done for frequently employed oleic acid and oleylamine stabilized, luminescent core/shell CdSe QDs and two commonly used encoding procedures. This included QD addition during bead formation by a thermally induced polymerization reaction and a post synthetic swelling procedure. The accessible number of COOH groups on the surface of QD-encoded and pristine beads was quantified by two colorimetric assays, utilizing differently sized reporters and electrostatic and covalent interactions. The results were compared to the total number of FGs obtained by a conductometric titration and Fourier transform infrared spectroscopy (FTIR). In addition, a comparison of the impact of QD and dye encoding on the bead surface chemistry was performed. Our results demonstrate the influence of QD encoding and the QD-encoding strategy on the number of surface FG that is ascribed to an interaction of the QDs with the carboxylic acid groups on the bead surface. These findings are of considerable relevance for applications of nanoparticle-encoded beads and safe-by-design concepts for nanomaterials.

Colloidal Ternary Telluride Quantum Dots for Tunable Phase Change Optics in the Visible and Near-Infrared

A structural change between amorphous and crystalline phase provides a basis for reliable and modular photonic and electronic devices, such as nonvolatile memory, beam steerers, solid-state reflective displays, or mid-IR antennas. In this paper, we leverage the benefits of liquid-based synthesis to access phase-change memory tellurides in the form of colloidally stable quantum dots. We report a library of ternary M_xGe_1-xTe colloids (where M is Sn, Bi, Pb, In, Co, Ag) and then showcase the phase, composition, and size tunability for Sn-Ge-Te quantum dots. Full chemical control of Sn-Ge-Te quantum dots permits a systematic study of structural and optical properties of this phase-change nanomaterial. Specifically, we report composition-dependent crystallization temperature for Sn-Ge-Te quantum dots, which is notably higher compared to bulk thin films. This gives the synergistic benefit of tailoring dopant and material dimension to combine the superior aging properties and ultrafast crystallization kinetics of bulk Sn-Ge-Te, while improving memory data retention due to nanoscale size effects. Furthermore, we discover a large reflectivity contrast between amorphous and crystalline Sn-Ge-Te thin films, exceeding 0.7 in the near-IR spectrum region. We utilize these excellent phase-change optical properties of Sn-Ge-Te quantum dots along with liquid-based processability for nonvolatile multicolor images and electro-optical phase-change devices. Our colloidal approach for phase-change applications offers higher customizability of materials, simpler fabrication, and further miniaturization to the sub-10 nm phase-change devices.

Phonon Raman spectroscopy of nanocrystalline multinary chalcogenides as a probe of complex lattice structures

Ternary (I-III-VI) and quaternary (I-II-IV-VI) metal-chalcogenides like CuInS₂or Cu₂ZnSn(S,Se)₄are among the materials currently most intensively investigated for various applications in the area of alternative energy conversion and light-emitting devices. They promise more sustainable and affordable solutions to numerous applications, compared to more developed and well understood II-VI and III-V semiconductors. Potentially superior properties are based on an unprecedented tolerance of these compounds to non-stoichiometric compositions and polymorphism. However, if not properly controlled, these merits lead to undesirable coexistence of different compounds in a single polycrystalline lattice and huge concentrations of point defects, becoming an immense hurdle on the way toward real-life applications. Raman spectroscopy of phonons has become one of the most powerful tools of structural diagnostics and probing physical properties of bulk and microcrystalline I-III-VI and I-II-IV-VI compounds. The recent explosive growth of the number of reports on fabrication and characterization of nanostructures of these compounds must be pointed out as well as the steady use of Raman spectroscopy for their characterization. Interpretation of the vibrational spectra of these compound nanocrystals (NCs) and conclusions about their structure can be complicated compared to bulk counterparts because of size and surface effects as well as emergence of new structural polymorphs that are not realizable in the bulk. This review attempts to summarize the present knowledge in the field of I-III-VI and I-II-IV-VI NCs regarding their phonon spectra and capabilities of Raman and IR spectroscopies in the structural characterizations of these promising families of compounds.

Nanoparticles for super-resolution microscopy: intracellular delivery and molecular targeting

Following an overview of the approaches and techniques used to acheive super-resolution microscopy, this review presents the advantages supplied by nanoparticle based probes for these applications. The various clases of nanoparticles that have been developed toward these goals are then critically described and these discussions are illustrated with a variety of examples from the recent literature.

Effects of Mono- and Bifunctional Surface Ligands of Cu-In-Se Quantum Dots on Photoelectrochemical Hydrogen Production

Semiconductor nanocrystal quantum dots (QDs) are promising materials for solar energy conversion because of their bandgap tunability, high absorption coefficient, and improved hot-carrier generation. CuInSe₂ (CISe)-based QDs have attracted attention because of their low toxicity and wide light-absorption range, spanning visible to near-infrared light. In this work, we study the effects of the surface ligands of colloidal CISe QDs on the photoelectrochemical characteristics of QD-photoanodes. Colloidal CISe QDs with mono- and bifunctional surface ligands are prepared and used in the fabrication of type-II heterojunction photoanodes by adsorbing QDs on mesoporous TiO₂. QDs with monofunctional ligands are directly attached on TiO₂ through partial ligand detachment, which is beneficial for electron transfer between QDs and TiO₂. In contrast, bifunctional ligands bridge QDs and TiO₂, increasing the amount of QD adsorption. Finally, photoanodes fabricated with oleylamine-passivated QDs show a current density of ~8.2 mA/cm², while those fabricated with mercaptopropionic-acid-passivated QDs demonstrate a current density of ~6.7 mA/cm² (at 0.6 V_RHE under one sun illumination). Our study provides important information for the preparation of QD photoelectrodes for efficient photoelectrochemical hydrogen generation.

Sequential, low-temperature aqueous synthesis of Ag-In-S/Zn quantum dots via staged cation exchange under biomineralization conditions

The development of high quality, non-toxic (i.e., heavy-metal-free), and functional quantum dots (QDs) via 'green' and scalable synthesis routes is critical for realizing truly sustainable QD-based solutions to diverse technological challenges. Herein, we demonstrate the low-temperature all-aqueous-phase synthesis of silver indium sulfide/zinc (AIS/Zn) QDs with a process initiated by the biomineralization of highly crystalline indium sulfide nanocrystals, and followed by the sequential staging of Ag⁺ cation exchange and Zn²⁺ addition directly within the biomineralization media without any intermediate product purification. Therein, we exploit solution phase cation concentration, the duration of incubation in the presence of In₂S₃ precursor nanocrystals, and the subsequent addition of Zn²⁺ as facile handles under biomineralization conditions for controlling QD composition, tuning optical properties, and improving the photoluminescence quantum yield of the AIS/Zn product. We demonstrate how engineering biomineralization for the synthesis of intrinsically hydrophilic and thus readily functionalizable AIS/Zn QDs with a quantum yield of 18% offers a 'green' and non-toxic materials platform for targeted bioimaging in sensitive cellular systems. Ultimately, the decoupling of synthetic steps helps unravel the complexities of ion exchange-based synthesis within the biomineralization platform, enabling its adaptation for the sustainable synthesis of 'green', compositionally diverse QDs.

Novel solution synthesis of the overlooked cubic phase Cu2GeTe3 nanocrystals for optoelectronic devices

Herein, for the first time, we present a novel solution method for controllable synthesis of the overlooked cubic phase Cu₂GeTe₃ nanocrystals. The resulting Cu₂GeTe₃ nanocrystals are of high quality with monodispersed size and uniform shape. Optical characterization demonstrates that Cu₂GeTe₃ nanocrystals have a broad absorption in the visible to near-infrared region. Furthermore, an optoelectronic device based on Cu₂GeTe₃ nanocrystals exhibits excellent stability, reproducibility and responsivity. The novel synthetic route presented here not only can open a new avenue for fabricating Cu₂GeTe₃ nanocrystals, especially at the nanoscale, but also may further expand their applications.

How different are the surfaces of semiconductor Ag2Se quantum dots with various sizes?

The surface of nanocrystals plays a dominant role in many of their physical and chemical properties. However, controllability and tunability of nanocrystal surfaces remain unsolved. Herein, we report that the surface chemistry of nanocrystals, such as near-infrared Ag₂Se quantum dots (QDs), is size-dependent and composition-tunable. The Ag₂Se QDs tend to form a stable metal complex on the surface to minimize the surface energy, and therefore the surface chemistry can be varied with particle size. Meanwhile, changes in surface inorganic composition lead to reorganization of the surface ligands, and the surface chemistry also varies with composition. Therefore, the surface chemistry of Ag₂Se QDs, responsible for the photoluminescence (PL) quantum yield and photostability, can be tuned by changing their size or composition. Accordingly, we demonstrate that the PL intensity of the Ag₂Se QDs can be tuned reversely by adjusting the degree of surface Ag⁺ enrichment via light irradiation or the addition of AgNO₃. This work provides insight into the control of QD surface for desired PL properties.

Optical Properties of Mn-Doped CuGa(In)S-ZnS Nanocrystals (NCs): Effects of Host NC and Mn Concentration

Time-gated fluorescence measurement (TGFM) using long-life fluorescence probes is a highly sensitive fluorescence-measurement technology due to the inherently high signal-to-background ratio. Although many probes for TGFM such as luminescent-metal-complex probes and lanthanide-doped nanoparticles are in development, they generally need sophisticated/expensive instruments for biosensing/imaging applications. Probes possessing high brightness, low-energy (visible light) excitation, and long lifetimes up to milliseconds of luminescence, are highly desired in order to simplify the optical and electronic design of time-gated instruments (e.g., adopting non-UV-grade optics or low-speed electronics), lower the instrument complexity and cost, and facilitate broader applications of TGFM. In this work, we developed Mn-doped CuGa(In)S-ZnS nanocrystals (NCs) using simple and standard synthetic steps to achieve all the desired optical features in order to investigate how the optical properties (fluorescence/absorption spectra, brightness, and lifetimes) of the Mn-doped NCs are affected by different host NCs and Mn concentrations in host NCs. With optimal synthetic conditions, a library of Mn-doped NCs was achieved that possessed high brightness (up to 47% quantum yield), low-energy excitation (by 405 nm visible light), and long lifetimes (up to 3.67 ms). Additionally, the time-domain fluorescence characteristics of optimal Mn-doped NCs were measured under pulsed 405 nm laser excitation and bandpass-filter-based emission collection. The measurement results indicate the feasibility of these optimal Mn-doped NCs in TGFM-based biosensing/imaging.

One-Step Aqueous Synthesis of Anionic and Cationic AgInS2 Quantum Dots and Their Utility in Improving the Efficacy of ALA-Based Photodynamic Therapy

Silver-indium-sulfide quantum dots (AIS QDs) have potential applications in many areas, including biomedicine. Their lack of regulated heavy metals, unlike many commercialized QDs, stands out as an advantage, but the necessity for alloyed or core-shell structures and related costly and sophisticated processes for the production of stable and high quantum yield aqueous AIS QDs are the current challenges. The present study demonstrates the one-step aqueous synthesis of simple AgInS2 QD compositions utilizing for the first time either a polyethyleneimine/2-mercaptopropionic acid (AIS-PEI/2MPA) mixture or only 2-mercaptopropionic acid (AIS-2MPA) as the stabilizing molecules, providing a AgInS2 portfolio consisting of cationic and anionic AIS QDs, respectively, and tuneable emission. Small AIS QDs with long-term stability and high quantum yields (19-23%) were achieved at a molar ratio of Ag/In/S 1/10/10 in water without any dopant or a semiconductor shell. The theranostic potential of these cationic and anionic AIS QDs was also evaluated in vitro. Non-toxic doses were determined, and fluorescence imaging potential was demonstrated. More importantly, these QDs were electrostatically loaded with zwitterionic 5-aminolevulinic acid (ALA) as a prodrug to enhance the tumor availability of ALA and to improve ALA-induced porphyrin photodynamic therapy (PDT). This is the first study investigating the influence of nanoparticle charge on ALA binding, release, and therapeutic efficacy. Surface charge was found to be more critical in cellular internalization and dark toxicity rather than drug loading and release. Both QDs provided enhanced ALA release at acidic pH but protected the prodrug at physiological pH, which is critical for tumor delivery of ALA, which suffers from low bioavailability. The PDT efficacy of the ALA-loaded AIS QDs was tested in 2D monolayers and 3D constructs of HT29 and SW480 human colon adenocarcinoma cancer cell lines. The incorporation of ALA delivery by the AIS QDs, which on their own do not cause phototoxicity, elicited significant cell death due to enhanced light-induced ROS generation and apoptotic/necrotic cell death, reducing the IC50 for ALA dramatically to about 0.1 and 0.01 mM in anionic and cationic AIS QDs, respectively. Combined with simple synthetic methods, the strong intracellular photoluminescence of AIS QDs, good biocompatibility of especially the anionic AIS QDs, and the ability to act as drug carriers for effective PDT signify that the AIS QDs, in particular AIS-2MPA, are highly promising theranostic QDs.

Highly efficient NIR-II luminescent I-III-VI semiconductor nanoprobes based on AgInTe2:Zn/ZnS nanocrystals

Highly efficient luminescence of AgInTe₂:Zn/ZnS nanocrystals with the maximum NIR-II quantum yield of 25.2% has been designed through elaborately manipulating the structure to reduce their internal and surface defects. These AgInTe₂:Zn/ZnS nanoprobes were employed for sensitive homogeneous biodetection of xanthine oxidase with the limit of detection down to 25 nU L^-1.

Surface ligand chemistry on quaternary Ag(In x Ga1-x )S2 semiconductor quantum dots for improving photoluminescence properties

Ternary and quaternary semiconductor quantum dots (QDs) are candidates for cadmium-free alternatives. Among these, semiconductors containing elements from groups 11, 13, and 16 (i.e., I-III-VI₂) are attracting increasing attention since they are direct semiconductors whose bandgap energies in the bulk state are tunable between visible and near infrared. The quaternary system of alloys consisting of silver indium sulfide (AgInS₂; bandgap energy: E _g = 1.8 eV) and silver gallium sulfide (AgGaS₂; E _g = 2.4 eV) (i.e., Ag[In _x Ga_1-x ]S₂ (AIGS)) enables bandgap tuning over a wide range of visible light. However, the photoluminescence (PL) quantum yield (10-20%) of AIGS QDs is significantly lower than that of AgInS₂ (60-70%). The present study investigates how to improve the PL quantum yield of AIGS QDs via surface ligand engineering. Firstly, the use of a mixture of oleic acid and oleylamine, instead of only oleylamine, as the solvent for the QD synthesis was attempted, and a threefold improvement of the PL quantum yield was achieved. Subsequently, a post-synthetic ligand exchange was performed. Although the addition of alkylphosphine, which is known as an L-type ligand, improved the PL efficiency only by 20%, the use of metal halides, which are categorized as Z-type ligands, demonstrated a twofold to threefold improvement of the PL quantum yield, with the highest value reaching 73.4%. The same procedure was applied to the band-edge emitting core/shell-like QDs that were synthesized in one batch based on our previous findings. While the as-prepared core/shell-like QDs exhibited a PL quantum yield of only 9%, the PL quantum yield increased to 49.5% after treatment with metal halides.

Highly Efficient Photoelectrochemical Hydrogen Production Using Nontoxic CuIn1.5Se3 Quantum Dots with ZnS/SiO2 Double Overlayers

Quantum dots (QDs) are a promising material for photoelectrochemical (PEC) hydrogen (H₂) production because of their attractive optical properties including high optical absorption coefficient, band-gap tunability, and potential multiple exciton generation. To date, QDs containing toxic elements such as Cd or Pb have been mainly investigated for PEC H₂ production, which cannot be utilized in practice because of the environmental issue. Here, we demonstrate a highly efficient type II heterojunction photoanode of nontoxic CuIn_1.5Se₃ (CISe) QDs and a mesoporous TiO₂ film. In addition, ZnS/SiO₂ double overlayers are deposited on the photoanodes to passivate surface defect sites on the CISe QDs, leading to the enhancement of both photocurrent density and photostability. Due to a combination of a wide light absorption range of the CISe QDs and the reduced interfacial charge recombination by the overlayers, a remarkable photocurrent density of 8.5 mA cm^-2 (at 0.5 V_RHE) is obtained under 1 sun illumination, which is a record for the PEC sulfite oxidation based on nontoxic QD photoanodes.

A review on I–III–VI ternary quantum dots for fluorescence detection of heavy metals ions in water: optical properties, synthesis and application

Ternary I–III–VI quantum dots used in the fluorescence detection of heavy metals ions in water.

Mn-Doped AgZnInS/ZnS Nanocrystals (NCs): Effects of Zn Etching on the NC Optical Properties

Mn-doped I(II)-III-VI NCs (e.g., Mn-doped AgZnInS/ZnS NCs) possessing low-energy excitation, high brightness and long fluorescence lifetimes have been desired for time-gated fluorescence biosensing/imaging. In this type of NCs, their optical properties are significantly affected by the microscopic interactions between Mn and Mn and between Mn and host NC, the compositions of NCs, and the defects in NCs. On the other hand, it is known that Zn etching to core I(II)-III-VI NCs in NC synthesis can significantly enhance the NC brightness because Zn can exchange surface atoms (e.g., Ag and In) in NCs to minimize NC surface-defects. But for Mn-doped I(II)-III-VI NCs, Zn etching could etch out not only surface-atoms of host NCs (e.g., Ag and In) but also Mn in NCs. As a result, it could significantly affect the NC compositions and the microscopic interactions between Mn and Mn as well as between Mn and host NC, and thus the optical properties of NCs (like lifetime and absorption/emission spectra). Therefore, it is needed to investigate how Zn etching would affect the optical properties of such Mn-doped NCs. In this study, a series of Mn-doped AgZnInS NCs with different Mn doping levels were prepared through nucleation doping, and then Zn etching was applied to etch these core NCs. To identify the effects of Zn etching on NC optical properties, ZnS coating (a different ZnS shelling approach by injecting Zn precursor and S precursor alternately in synthesis) was performed on the same Mn:AgZnInS NCs, and the optical properties of NCs with these two different ZnS shelling approaches were compared. Experimental results showed that under appropriate Mn doping levels in synthesis, Zn etching instead of ZnS coating can produce low-energy excitable NCs with higher QYs and longer lifetimes, which would further facilitate the use of such NCs in time-gated fluorescence measurement. To understand the reasons for the different optical properties under different ZnS shelling approaches, the material characteristics of the prepared NCs were further measured/analyzed and the possible fluorescence mechanisms were discussed.

Synthetic Ligand Selection Affects Stoichiometry, Carrier Dynamics, and Trapping in CuInSe2 Nanocrystals

CuInSe₂ nanocrystals exhibit tunable near-infrared bandgaps that bolster utility in photovoltaic applications as well as offer potential as substitutes for more toxic Cd- and Pb-based semiconductor compositions. However, they can present a variety of defect states and unusual photophysics. Here, we examine the effects of ligand composition (oleylamine, diphenylphosphine, and tributylphosphine) on carrier dynamics in these materials. Via spectroscopic measurements such as photoluminescence and transient absorption, we find that ligands present during the synthesis of CuInSe₂ nanocrystals impart nonradiative electronic states which compete with radiative recombination and give rise to low photoluminescence quantum yields. We characterize the nature of these defect states (hole vs electron traps) and investigate whether they exist at the surface or interior of the nanocrystals. Carrier lifetimes are highly dependent on ligand identity where oleylamine-capped nanocrystals exhibit rapid trapping (<20 ps) followed by diphenylphosphine (<500 ps) and finally tributylphosphine (>2 ns). A majority of carrier population localizes at indium copper antisites (electrons), copper vacancies (holes), or surface traps (electrons and/or holes), all of which are nonemissive.

Non-excitonic defect-assisted radiative transitions are responsible for new D-type blinking in ternary quantum dots

This work addresses the issue of dark states formation in QDs by cooperative excitonic and intrinsic defect-assisted radiative transitions. Here we refer to the observed blinking as D-type to distinguish it from purely excitonic types. It is shown experimentally that defect-assisted radiative relaxations in a single I-III-VI QD result in atypical blinking characteristics that cannot be explained on the basis of charged exciton models. In addition to the excitonic channel, it has been proposed that defect-assisted kinetics can also form blinking patterns. Two conditions for the formation of dark states have been identified which are related to correlation and competition when considering photons emitted from bright defects. Two transition schemes have therefore been proposed. The first transition scheme includes time-correlated trapping of more than one electron at a single trap centre. This is used to simulate variations in the defect's charge state and switching between radiative/nonradiative transitions. The latter scheme, on the other hand, involves uncorrelated trapping and radiative relaxations from two different types of defects (competition). Both schemes are seen to play an equal role in radiative processes in I-III-VI QDs. Considered together, the proposed models can reflect the experimental data with very good accuracy, providing a better understanding of the underlying physics. An important implication of these schemes is that dark states formation doesn't have to be limited to mechanisms that involve charged excitons, and it may also be observed for independent defect assisted kinetics. This is especially valid for highly defected or multinary QDs.

Ligand Conversion in Nanocrystal Synthesis: The Oxidation of Alkylamines to Fatty Acids by Nitrate

Ligands are a fundamental part of nanocrystals. They control and direct nanocrystal syntheses and provide colloidal stability. Bound ligands also affect the nanocrystals' chemical reactivity and electronic structure. Surface chemistry is thus crucial to understand nanocrystal properties and functionality. Here, we investigate the synthesis of metal oxide nanocrystals (CeO_2-x , ZnO, and NiO) from metal nitrate precursors, in the presence of oleylamine ligands. Surprisingly, the nanocrystals are capped exclusively with a fatty acid instead of oleylamine. Analysis of the reaction mixtures with nuclear magnetic resonance spectroscopy revealed several reaction byproducts and intermediates that are common to the decomposition of Ce, Zn, Ni, and Zr nitrate precursors. Our evidence supports the oxidation of alkylamine and formation of a carboxylic acid, thus unraveling this counterintuitive surface chemistry.

Defective Ag-In-S/ZnS quantum dots: an oxygen-derived free radical scavenger for mitigating macrophage inflammation

Oxidative stress plays an important role in the development of inflammatory diseases including allergy, heart disease, diabetes and cancer. Nanomaterial-mediated antioxidant therapy is regarded as a promising strategy to treat oxidative stress-mediated inflammation. Herein, defective Ag-In-S/ZnS quantum dots (AIS/ZnS QDs) with oxygen-derived radical-scavenging capabilities are developed. Owing to their intrinsic defects and abundant surface functional groups, these quantum dots exhibit excellent oxygen-derived free radical removal efficiency in vitro. In macrophages, AIS/ZnS QDs can eliminate intracellular excessive ROS stimulated by either H₂O₂ or lipopolysaccharide (LPS), thus can effectively protect macrophages against ROS-induced oxidative injury. Moreover, in the model of LPS-triggered macrophage inflammation, they exhibit benign anti-inflammatory ability by inhibiting the expression of related proinflammatory cytokines (e.g., TNF-α and IL-6). These findings indicate that AIS/ZnS QDs hold great potential for the treatment of ROS-related inflammatory disorders.

Luminescent Quaternary Ag(InxGa1-x)S2/GaSy Core/Shell Quantum Dots Prepared Using Dithiocarbamate Compounds and Photoluminescence Recovery via Post Treatment

Cadmium-free quantum dots (QDs) consisting of silver-indium-gallium-sulfide (AIGS) quaternary semiconductors were successfully synthesized using a metal-dithiocarbamate complex with sufficiently high reactivity to produce metal sulfides. The introduction of a gallium diethyldithiocarbamate precursor decreased the reaction temperature to produce active intermediates, which were subsequently converted into AIGS QDs at 150 °C with silver and indium acetates. Because of the low reaction temperature, AIGS QDs with a tetragonal crystal phase were produced selectively, which favorably generated band-edge emission whose full width at half-maximum is smaller than 40 nm after they were coated with gallium sulfide (GaS_y) shells. The compositional indium/gallium ratio was varied by changing the mixing ratio of the precursors used for the synthesis of the AIGS core, and the band-edge photoluminescence (PL) generated from the AIGS/GaS_y core/shell QDs was blue-shifted with an increase in the gallium content in the core. Consequently, a pure green emission centered at 518 nm was obtained with a PL quantum yield as high as 68%.

Synthesis and Optical Properties of In2S3-Hosted Colloidal Zn-Cu-In-S Nanoplatelets

High-efficiency photoluminescence quaternary hexagon Zn-Cu-In-S (ZCIS) nanoplatelets (NPls) have been synthesized by a two-step cation exchange method, which starts with the In₂S₃ NPls followed by the addition of Cu and Zn. It is the first time that In₂S₃ NPls are used as templates to synthesize ZCIS NPls. In this paper, the reaction temperature of In₂S₃ is essential for the formation of NPls. The photoluminescence wavelength of NPls can be tuned by adjusting the temperature of Cu addition. To enhance the stability of the resulting NPls and to improve their optical properties, we introduced Zn²⁺ and obtained ZCIS NPls by cation exchange on the surface. It is worth noting that the obtained ZCIS NPls show a shorter fluorescence lifetime than other ternary copper sulfide-based NPls. This work provides a new way to synthesize high-efficiency, nontoxic, and no byproduct ZCIS NPls.

Emission tuning of highly efficient quaternary Ag-Cu-Ga-Se/ZnSe quantum dots for white light-emitting diodes

With the blooming development of zero-dimensional nanomaterials, I-III-VI alloying quantum dots (QDs) with outstanding photoelectrical properties have emerged to attract much attention as promising environmentally-friendly substitutions for conventional binary Cd-based QDs. In this work, a facile one-pot method was introduced to synthesize unreported quaternary Ag-Cu-Ga-Se/ZnSe (ACGSe/ZnSe) QDs. A relatively high photoluminescence quantum yield (PL QY) of 71.9% and a tunable emission from 510 to 620 nm were successfully achieved. We explored the roles of alloying compositions in ACGSe/ZnSe QDs, inferring that increased Ag proportion would not only lower the V_defect level which leads to the blue shift of emission, but also slow the ZnSe shelling process owing to the larger lattice distortion. At last, the white light-emitting diodes (WLEDs) were fabricated with ACGSe/ZnSe QDs as the conversion layer, indicating that the as-prepared QDs are a promising candidate for further applications.

Dithiocarbamate Complexes as Single Source Precursors to Nanoscale Binary, Ternary and Quaternary Metal Sulfides

Nanodimensional metal sulfides are a developing class of low-cost materials with potential applications in areas as wide-ranging as energy storage, electrocatalysis, and imaging. An attractive synthetic strategy, which allows careful control over stoichiometry, is the single source precursor (SSP) approach in which well-defined molecular species containing preformed metal-sulfur bonds are heated to decomposition, either in the vapor or solution phase, resulting in facile loss of organics and formation of nanodimensional metal sulfides. By careful control of the precursor, the decomposition environment and addition of surfactants, this approach affords a range of nanocrystalline materials from a library of precursors. Dithiocarbamates (DTCs) are monoanionic chelating ligands that have been known for over a century and find applications in agriculture, medicine, and materials science. They are easily prepared from nontoxic secondary and primary amines and form stable complexes with all elements. Since pioneering work in the late 1980s, the use of DTC complexes as SSPs to a wide range of binary, ternary, and multinary sulfides has been extensively documented. This review maps these developments, from the formation of thin films, often comprised of embedded nanocrystals, to quantum dots coated with organic ligands or shelled by other metal sulfides that show high photoluminescence quantum yields, and a range of other nanomaterials in which both the phase and morphology of the nanocrystals can be engineered, allowing fine-tuning of technologically important physical properties, thus opening up a myriad of potential applications.

Design of cross-linked polyisobutylene matrix for efficient encapsulation of quantum dots

Photoluminescent quantum dots (QDs) are a prominent example of nanomaterials used in practical applications, especially in light-emitting and light-converting devices. Most of the current applications of QDs require formation of thin films or their incorporation in solid matrices. The choice of an appropriate host material capable of preventing QDs from degradation and developing a process of uniform incorporation of QDs in the matrix have become essential scientific and technological challenges. In this work, we developed a method of uniform incorporation of Cu-Zn-In-S (CZIS) QDs into a highly protective cross-linked polyisobutylene (PIB) matrix with high chemical resistance and low gas permeability. Our approach involves the synthesis of a methacrylate-terminated three-arm star-shaped PIB oligomeric precursor capable of quick formation of a robust 3D polymer network upon exposure to UV-light, as well as the design of a special ligand introducing short PIB chains onto the surface of the QDs, thus providing compatibility with the matrix. The obtained cross-linked QDs-in-polymer composites underwent a complex photostability test in air and under vacuum as well as a chemical stability test. These tests found that CZIS QDs in a cross-linked PIB matrix demonstrated excellent photo- and chemical stability when compared to identical QDs in widely used polyacrylate-based matrices. These results make the composites developed excellent materials for the fabrication of robust, stable and durable transparent light conversion layers.

Synthesis of deep red emitting Cu-In-Zn-Se/ZnSe quantum dots for dual-modal fluorescence and photoacoustic imaging

CuInSe₂ quantum dots (QDs) are one of the most important Cd-free fluorescent probes; they usually exhibited low fluorescence intensity, suggesting that a considerable amount of absorbed photon energy was lost as heat. In this study we aimed to improve the fluorescence intensity of CuInSe₂ QDs and investigate their photoacoustic (PA) signal resulting from the heat dissipation, which was previously rarely reported. Cu-In-Zn-Se/ZnSe QDs were synthesized by adopting two strategies of Zn doping and ZnSe shell growth. It was found that there was an upper limit for Zn concentration beyond which the fluorescence intensity began to decrease. In addition, a blue shift of the emission peak of Cu-In-Zn-Se/ZnSe QDs was observed at high concentrations of ZnSe precursor due to the diffusion of excessive Zn. To prepare the dual-modal fluorescence and PA imaging probe, poly(maleic anhydride-alt-1-octadecene) (PMAO) modified with polyethylene glycol (PEG) was coated on the QDs, which led to a slight reduction in fluorescence. Cellular labeling on HeLa cells was performed to demonstrate the utility of these probes for fluorescence imaging. We further studied the in vitro PA imaging capabilities of the Cu-In-Zn-Se/ZnSe/PMAO-g-PEG nanoparticles, which showed a distinct PA signal beyond 1.0 mg ml^-1. The current work demonstrated that a moderate amount of Zn doping is necessary for enhancing fluorescence and there is a limit beyond which the fluorescence will be diminished. We also demonstrated the proof of concept that Cu-In-Zn-Se/ZnSe QDs are able to serve as a potential PA imaging contrast agent.

Quantum Dots and Gd3+ Chelates: Advances and Challenges Towards Bimodal Nanoprobes for Magnetic Resonance and Optical Imaging

The development of multimodal nanoprobes has been growing in recent years. Among these novel nanostructures are bimodal systems based on quantum dots (QDs) and low molecular weight Gd³⁺ chelates, prepared for magnetic resonance imaging (MRI) and optical analyses. MRI is a technique used worldwide that provides anatomic resolution and allows distinguishing of physiological differences at tissue and organ level. On the other hand, optical techniques are very sensitive and allow events to be followed at the cellular or molecular level. Thus, the association of these two techniques has the potential to achieve a more complete comprehension of biological processes. In this review, we present state-of-the-art research concerning the development of potential multimodal optical/paramagnetic nanoprobes based on Gd³⁺ chelates and QDs, highlighting their preparation strategies and overall properties.

High-performance tricolored white lighting electroluminescent devices integrated with environmentally benign quantum dots

The electroluminescent (EL) performances of quantum dot-light-emitting diodes (QLEDs) based on either high-quality CdSe- or Cd-free quantum dots (QDs) have been greatly improved during the last decade, exclusively aiming at monochromatic devices for display applications. Meanwhile, work on white lighting QLEDs integrated particularly with Cd-free QDs remains highly underdeveloped. In this work, the solution-processed fabrication of tricolored white lighting QLEDs comprising three environmentally benign primary color emitters of II-VI blue and green ZnSeTe and I-III-VI red Zn-Cu-In-S (ZCIS) QDs is explored. The emitting layer (EML) consists of two different QD layers stacked on top of the other with an ultrathin ZnMgO nanoparticle buffer layer inserted in the middle, with both blue and green QDs mixed in one layer, and red QDs placed in a separate layer. The stacking order of the bilayered EML architecture is found to control the exciton recombination zone and thus crucially determine the EL performance of the device. The optimal tricolored white device yields outstanding EL performances such as 5461 cd m^-2 luminance, 5.8% external quantum efficiency, and 8.4 lm W^-1 power efficiency, along with a near-ideal color rendering index of 95, corresponding to the record quantities reported among Cd-free white lighting QLEDs.

Controllable synthesis of non-layered two-dimensional plate-like CuGaSe2 materials for optoelectronic devices

CuGaSe2 semiconductor materials, as an important member of the I-III-VI2 family, have sparked tremendous attention due to their fascinating structure-related properties and promising applications in solar energy storage and conversion. Nevertheless, the controllable preparation of two-dimensional (2D) CuGaSe2 structures is still a daunting challenge owing to the intrinsic non-layered crystal structure and inaccessible reactivity-matching of multiple reaction precursors, which will seriously impede the much deeper research progress on their properties and applications. Herein, non-layered 2D CuGaSe2 plates possessing high crystallinity, and uniform size and morphology have been first synthesized by a feasible cation exchange strategy. Because the fabrication of 2D CuGaSe2 crystals is rarely reported, a particular highlight is laid on the compositional analysis, structural characterization, and formation mechanism. Furthermore, the optical absorption and optoelectronic measurements reveal that the as-synthesized CuGaSe2 plates exhibit high light harvesting capacity and excellent photoelectric performance. This study opens up a new avenue for the feasible fabrication of non-layered CuGaSe2 plates possessing a high-quality crystalline structure and provides a promising candidate for the development of novel solar energy conversion and storage devices.

Heterogeneity induced dual luminescence properties of AgInS2 and AgInS2–ZnS alloyed nanocrystals

In the PL spectra of heterogeneous nanocrystals (In₂S₃–AgInS₂ and In₂S₃–AgInS₂–ZnS) two distinctly different peaks could be found at 430 and 710–515 nm.

Covid-19 acute responses and possible long term consequences: What nanotoxicology can teach us

Long-term effects of Covid-19 disease are still poorly understood. However, similarities between the responses to SARS-CoV-2 and certain nanomaterials suggest fibrotic pulmonary disease as a concern for public health in the next future. Cross-talk between nanotoxicology and other relevant disciplines can help us to deploy more effective Covid-19 therapies and management strategies.

Manipulating Electronic Structure from the Bottom-Up: Colloidal Nanocrystal-Based Semiconductors

Semiconductors assembled from colloidal nanocrystals (NCs) are often described in the same terms as their single-crystalline counterparts with references to conduction and valence band edges, doping densities, and electronic defects; however, how and why semiconductor properties manifest in these bottom-up fabricated thin films can be fundamentally different. In this Perspective, we describe the factors that determine the electronic structure in colloidal NC-based semiconductors, and comment on approaches for measuring or calculating this electronic structure. Finally, we discuss future directions for these semiconductors and highlight their potential to bridge the divide between localized quantum effects and long-range transport in thin films.

Synthesis and Characterization of CuIn1-xGaxSe2 Semiconductor Nanocrystals

In this paper, the synthesis and characterization of CuIn_1−xGa_xSe₂ (0 ≤ x ≤ 1) nanocrystals are reported with the influences of x value on the structural, morphological, and optical properties of the nanocrystals. The X-ray diffraction (XRD) results showed that the nanocrystals were of chalcopyrite structure with particle size in the range of 11.5–17.4 nm. Their lattice constants decreased with increasing Ga content. Thus, the x value of the CuIn_1−xGa_xSe₂ nanocrystals was estimated by Vegard’s law. Transmission electron microscopy (TEM) analysis revealed that the average particle size of the nanocrystals agreed with the results of XRD. Well-defined lattice fringes were shown in the TEM images. An analysis of the absorption spectra indicated that the band gap energy of these CuIn_1−xGa_xSe₂ nanocrystals was tuned from 1.11 to 1.72 eV by varying the x value from 0 to 1. The Raman spectra indicated that the A₁ optical vibrational mode of the nanocrystals gradually shifted to higher wavenumber with increasing x value. A simple theoretical equation for the A₁ mode frequency was proposed. The plot of this equation showed the same trend as the experimental data.

Multinary copper-based chalcogenide nanocrystal systems from the perspective of device applications

Multinary chalcogenide semiconductor nanocrystals are a unique class of materials as they offer flexibility in composition, structure, and morphology for controlled band gap and optical properties. They offer a vast selection of materials for energy conversion, storage, and harvesting applications. Among the multinary chalcogenides, Cu-based compounds are the most attractive in terms of sustainability as many of them consist of earth-abundant elements. There has been immense progress in the field of Cu-based chalcogenides for device applications in the recent years. This paper reviews the state of the art synthetic strategies and application of multinary Cu-chalcogenide nanocrystals in photovoltaics, photocatalysis, light emitting diodes, supercapacitors, and luminescent solar concentrators. This includes the synthesis of ternary, quaternary, and quinary Cu-chalcogenide nanocrystals. The review also highlights some emerging experimental and computational characterization approaches for multinary Cu-chalcogenide semiconductor nanocrystals. It discusses the use of different multinary Cu-chalcogenide compounds, achievements in device performance, and the recent progress made with multinary Cu-chalcogenide nanocrystals in various energy conversion and energy storage devices. The review concludes with an outlook on some emerging and future device applications for multinary Cu-chalcogenides, such as scalable luminescent solar concentrators and wearable biomedical electronics.

One-Pot Synthesis of High-Quality AgGaS2/ZnS-based Photoluminescent Nanocrystals with Widely Tunable Band Gap

Herein, we present a facile colloidal method to synthesize the high-quality AgGaS₂ nanocrystals (NCs) within 2 min via exploiting the high-reactivity S precursor and then extend this synthetic strategy to the preparation of AgGaS₂/ZnS core-shell NCs by a one-pot method without prior purification of AgGaS₂ core. The as-synthesized samples were structurally characterized to confrim the formation of AgGaS₂/ZnS core-shell NCs. The energy band gap of the AgGaS₂/ZnS NCs can be effectively tunable from 2.98 to 2.83 eV by the control of their nonstoichiometry and further continuously decreases to 1.90 eV by the preparation of alloyed AgGa_xIn_1-xS₂/ZnS NCs (1 ≤ x ≤ 0). Benefitting from the efficient band gap modulations, the photoluminescence (PL) colors of the AgGaS₂-based NCs can cover almost the whole visible region from blue (460 nm) to red (671 nm). Our work demonstrates the one-pot synthesis of AgGaS₂/ZnS core-shell NCs and their band gap engineering, which is of crucial in scalability toward industrial application and in tailoring optical characteristics of I-III-VI₂ materials.