Design of Collective Motions from Synthetic Molecular Switches, Rotors, and Motors

Conservation of structure and dynamic behavior in triazine macrocycles with opportunities for subtle control of hinge motion

Modifying the backbone of 24-atom macrocycles allows tailoring of physical properties (octanol-water partition coefficients, log P) while conserving both conformation and the barrier to dynamic, hinge-like motion. Structure is determined by 1D and 2D NMR spectroscopy. The barrier can be subtly tuned by modifications that appear to preclude fully revolute motion and efficient π-stacking of the two subunits. The log P values increase as expected across this series, and the correlation between computed and observed values reinforces the belief of common structure and behavior across this class of macrocycles.

Design of Near-Infrared Emissive Molecular Switches Based on Stilbene-Appended Cyclometalated Bimetallic Ru(II)-Terpyridine Complexes

In the present study, we have synthesized and thoroughly characterized two Ru(II) dimers with compositions [(ttpy)Ru(tpvpt')Ru(ttpy)](ClO4)3 and [(ttpy)Ru(t'pvpvpt')Ru(ttpy)](ClO4)2 incorporating phenylene-vinylene-substituted terpyridine bridging ligands capable of coordinating in both an NNN- and cyclometalated NNC-fashion. The complexes display strong absorption across the entire UV-vis spectral domain and exhibit luminescence in the NIR region (820-850 nm). The N atoms in the outer coordination sphere were employed for alteration of the photoredox behaviors of the complexes via acid-base equilibria. Decoordination of the Ru-C bonds in the presence of acid, followed by recoordination in the presence of base and heat, is also possible. Additionally, the phenylene-vinylene units in the bridging ligands facilitate trans → cis and trans-trans → trans-cis isomerization under visible light irradiation. The reverse isomerization (cis → trans and trans-cis → trans-trans) is also achieved upon UV light irradiation. Thus, "on-off" and "off-on" emission switching is facilitated through a judicious choice of external stimuli like acid, base, temperature, or light of particular wavelengths. Interestingly, the rate of photoswitching is significantly faster in the presence of acid compared to that in the absence of acid. DFT and TD-DFT calculations were also conducted to clearly visualize the electronic environment around the complex backbone and also for accurate assignment of the absorption and emission bands.

Main-chain stiff-stilbene photoswitches in solution, in bulk, and at surfaces

Molecular photoswitches have been incorporated into polymer backbones to control the macromolecular conformations by structural changes of the main-chain photoswitches. However, previous photoswitches installed in the main chains are thermolabile, which precludes deep understanding, precise regulation, and practical applications of the macromolecular conformational changes. Herein, we focus on sterically hindered stiff stilbene (HSS), an emerging photoswitch offering large structural changes in isomerization between the thermally bistable E and Z isomers, and disclose the chemistry of main-chain HSS photoswitches in solution, in bulk, and at thin film surfaces. We synthesize and investigate three types of linear polymers with different chemical linkages between HSS repeating units, polyurethane, polyester, and polyene. The polymer conformations in solution, i.e., hydrodynamic volume, are reversibly photocontrollable in a precise manner by the E/Z ratio. Furthermore, the nanoscopic conformational transformations are amplified to macroscopic photoswitching of the solution transmittance and the surface wettability synergistically with changes between interchain and intrachain hydrogen bonding in the polyurethanes. Additionally, the Z-to-E photoisomerization yields in the glassy state are above 70%, comparable to those in solution, and extraordinarily high despite the restricted molecular mobility. The findings of this study will pave the way for practical and unconventional applications of smart polymer systems based on photoswitches.

Photo-controllable microcleaner: photo-induced crawling motion and particle transport of azobenzene crystals on a liquid-like surface

Organic crystals of 3,3'-dimethylazobenzene (DMAB) exhibit photo-induced crawling motion on solid surfaces when they are simultaneously irradiated with ultraviolet and visible light from opposite directions. DMAB crystals are candidates for light-driven cargo transporters, having simple chemical compositions and material structures. However, fast crawling motion without significant shape deformation has not yet been achieved. In this study, compared with hydrophilic glass and conventional hydrophobic surfaces with alkyl chains, siloxane-based hybrid surfaces, which are "liquid-like surfaces," result in the fastest crawling motion (4.2 μm min-1) while the droplet-like shape of DMAB crystals is maintained. Additionally, we successfully demonstrate that the DMAB crystals are capable of capturing and carrying silica particles on the hybrid surface. The transport direction is changed on demand without releasing the particles by simply changing the irradiation direction. The particles can be left on the substrate by removing the DMAB crystals via sublimation at room temperature. This result showcases a new concept of "photo-controllable microcleaner" that can operate a series of cargo capture-carry-release tasks. We expect this transporter to contribute to the development of crystal actuators, microfluidics, and microscale molecular flasks/reactors.

A Metastable Semiquinone Molecular Switch Modulated by Ascorbate/O2: A Study from a System Far-From-Equilibrium to Biological Assays in Mitochondria

A molecular switch based on the metastable radical anion derived from a substituted heteroaryl quinone is described. Pyrrolyl quinone thiocyanate (PQ 9) showed an interaction with the fluoride anion that was visible to the naked eye and quantified by UV/vis and 1H and 13 C NMR. The metastable quinoid species formed by the interaction with F- ("ON" state) showed a molecular switching effect autocontrolled by the presence of ascorbate ("OFF" state) and back to the "ON" state by an autooxidation process, measured by visible and UV/vis spectroscopy. Due to its out-of-equilibrium properties and the exchange of matter and energy, a dissipative structural behaviour is proposed. Considering its similarity to the mechanism of coenzyme Q in oxidative phosphophorylation, PQ 9 was evaluated on Saccharomyces cerevisiae mitochondrial function for inhibition of complexes II, III and IV, reactive oxygen species (ROS) production, catalase activity and lipid peroxidation. The results showed that PQ 9 inhibited complex III activity as well as the activity of all electron transport chain (ETC) complexes. In addition, PQ 9 reduced ROS production and catalase activity in yeast. The results suggest that PQ 9 may have potential applications as a new microbicidal compound by inducing ETC dysfunction.

Macrocyclic bis-diphosphenes demonstrating bimetallic exo- and endo-cyclic binding modes

Macrocyclic bis-diphosphenes, formally heavier derivatives of macrocyclic azobenzenes, are accessed for the first time. These are synthesised in a reproducible fashion, through the nickel-mediated homocoupling of xanthene-derived NHC-stabilised bis-phosphinidene units. This gives direct access to target macrocyclic bis-diphosphenes 2, featuring exo-cyclic coordinated Ni0 fragments. The endo-cyclic binding mode in 3 is realised by NHC-abstraction using CuCl, so demonstrating two homometallic binding modes for this system. Additionally, reaction with CuCl in acetonitrile yields small amounts of a tetra-metallic NiII/CuI complex, which establishes simultaneous exo- and endo-cyclic metal binding. Fluctional solution state behavior in these systems is explored through variable temperature NMR spectroscopy, in addition to computational bonding analyses, giving the first insights into this novel class of compounds.

Image of the solid-state rotary motion encoded in the dielectric response

The future development of advanced molecular systems with controlled rotation requires the development of an effective methodology for assessing the rotational performance of artificial machine components. We identified two patterns of the dielectric behavior for polar rotators in a static non-polar framework of sizable crystal showing relations between the spectral and molecular-level features of solid-state rotary motion. Various functionalization of phenylene rotors with a fluorine atom(s) changed rotational performance from high to low with rotational barriers ranging from 6.06 to 11.84 kcal mol-1. The meta-F-substitution favored rotator-rotator contacts allowing for the implementation of fast rotary motion. Contrary, the presence of rotator-stator contacts inhibited independent rotator dynamics leading to opposite spectral behavior in terms of temperature evolution of loss peak amplitude. Our observations, supported by an analysis based on an asymmetric double well-potential model, show that easily noticeable spectral differences encoded some molecular-level information important for the implementation of rotary motion.

Azobenzene-based liposomes with nanomechanical action for cytosolic chemotherapeutic drug delivery

The stimuli-responsive nano-carriers are at the forefront of research in nanotechnology and materials science. These advanced systems are designed to alter their physicochemical properties upon exposure to specific stimuli, enabling controllable and targeted delivery of therapeutic agents. Nevertheless, limited endosomal escape reduces the drug bioavailability in clinical use. We herein report azobenzene (Azo)-based liposomes, prepared by co-assembling the photoisomerizable cationic Azo lipids and helper lipids, which achieve controllable doxorubicin (Dox) release and enhanced cytosolic transport upon light irradiation. Azo lipids undergo reversible isomerization between cis-isomers and trans-isomer when received UV and visible (Vis) light irradiation, causing liposomal membrane permeability changes for controlled drug release. Moreover, the nanomechanical action created by the isomerization of Azo lipids promotes the endosomal escape of the liposomes. DSPC-Azo liposomes, with minimal Dox leakage, showed significant tumor cell killing upon irradiation. For in vivo study, we co-encapsulated the upconverting nanoparticles (UCNPs), which can convert the near-infrared (NIR) light into UV/Vis emissions, facilitating Azo units activation. UCNP/Dox-loaded DSPC-Azo liposomes inhibited tumor growth under NIR irradiation in a 4T1 tumor-bearing mouse model.

Light-induced reversible switching of generation and extinction of an organic radical anion

Radicals play a crucial role across various domains, ranging from serving as catalysts in chemical reactions to materials for spintronic applications. Currently, a major challenge for the chemists is the development of the next generation of organic radicals controllable by photons. To tackle this challenge, here we introduce a dyad system that combines a dimethyldihydropyrene (DHP) photochromic unit with a naphthalene diimide (NDI) moiety. This system forms a stable organic NDI-based radical-anion upon exposure to light in a solvent containing a small amount of an amine that acts as an electron donor. The radical anion formation has also been demonstrated with a chemical reductant. The photoisomerization of this photochromic system converts it into a less-conjugated and less-electron-rich form, affecting the generation of the radical as well as its stability. Consequently, light-induced isomerization effectively quenches the radical. Thus, the formation and existence of the radical can be adjusted by manipulating the photoisomerization of the photochromic unit under diverse light sources. Additionally, the system exhibits significant differences in emission in the radical and the closed-shell state, thereby offering a dual readout of the state of the molecule.

Correlated shapeshifting and configurational isomerization

Herein we demonstrate that the rapid 'shapeshifting' constitutional isomerization of a substituted bullvalene is influenced by the E-to-Z configurational isomerization of a remote carbamate group, giving rise to correlated motion. We find that, while the E-configurational isomer of a bulky carbamate favors the β-bullvalene constitutional isomer, a noncovalent bonding interaction within the Z-carbamate tips the equilibrium toward the γ-bullvalene form. Using DFT modelling and NMR spectroscopy, this long-range interaction is identified as being between the bullvalene core and a pendant phenyl group connected to the carbamate. Coupling the constitutional changes of a bullvalene to a reciprocal configurational isomerization through a long-range interaction in this way will allow shapeshifting rearrangements to be exploited as part of collective motion in extended structures.

Molecular folding governs switchable singlet oxygen photoproduction in porphyrin-decorated bistable rotaxanes

Rotaxanes are mechanically interlocked molecules where a ring (macrocycle) is threaded onto a linear molecule (thread). The position of the macrocycle on different stations on the thread can be controlled in response to external stimuli, making rotaxanes applicable as molecular switches. Here we show that bistable rotaxanes based on the combination of a Zn(II) tetraphenylporphyrin photosensitizer, attached to the macrocycle, and a black-hole-quencher, attached to the thread, are capable of singlet oxygen production which can be switched on/off by the addition of base/acid. However, we found that only a sufficiently long linker between both stations on the thread enabled switchability, and that the direction of switching was inversed with regard to the original design. This unexpected behavior was attributed to intramolecular folding of the rotaxanes, as indicated by extensive theoretical calculations. This evidences the importance to take into account the conformational flexibility of large molecular structures when designing functional switchable systems.

Synthesis of Halogenated Dibenzo[1,2,6]triazonines and Late-Stage Functionalization of the Triazonine Ring

Dibenzotriazonine represent a new class of nine-membered cyclic azobenzenes with a nitrogen atom embedded in the bridging chain. To enable future applications of this photoactive backbone, we propose in this study the synthesis of mono- and dihalogenated triazonines, that allow the late-stage introduction of different functionalized aryl groups and heteroatoms (N, O, and P) via palladium-catalyzed reactions. Indeed, different diphenylphosphoryl-triazonines were synthesized with functional groups such as aniline or phenol. Bis(diphenylphosphoryl)phenyl mono- and bis-carbamate-triazonines were also isolated in good yields.

Solar-Powered Molecular Crystal Motor Based on an Anthracene-Thiazolidinedione Photoisomerization Reaction

Assembling molecular machines into crystals provides a way to harness their power on large length scales, but the development of a crystal analogue to a molecular motor remains a challenge. The molecule (Z)-5-(anthracen-9-ylmethylene)-3-butylthiazolidine-2,4-dione (C4-ATD) has E and Z isomers with strongly overlapping absorption spectra. This spectroscopic property allows both Z → E and E → Z photoisomerization reactions to be driven by a single light source, and simulations indicate this property can provide a route to robust oscillatory motion. Reprecipitation in an aqueous surfactant enables the growth of single crystal microwires that exhibit continuous mechanical oscillations under a wide range of illumination conditions, including ambient solar irradiation. Molecular crystal motors provide a new approach for transforming continuous light into oscillatory mechanical motion.

Supramolecular assemblies of amphiphilic donor-acceptor Stenhouse adducts as macroscopic soft scaffolds

In the design of photoharvesting and photoresponsive supramolecular systems in aqueous medium, the fabrication of amphiphilic photoswitches enables a noninvasive functional response through photoirradiation. Although most aqueous supramolecular assemblies are driven by high-energy and biodamaging UV light, we have previously reported a design of amphiphilic donor-acceptor Stenhouse adducts (DASAs) controlled by white light. Herein, we present a series of DASA amphiphiles (DAs) with minor structural modifications on the alkyl linker chain length connecting the DASA motif with the hydrophilic moiety. The excellent photoswitchability in organic medium and the photoresponsiveness in aqueous medium, driven by visible light, were investigated by UV-vis absorption spectroscopy. The assembled supramolecular nanostructures were confirmed by electron microscopy, while the supramolecular packing was revealed by X-ray diffraction analysis. Upon visible-light irradiation, significant transformations of the DA geometry enabled transformations of the supramolecular assemblies on a microscopic scale, subsequently disassembling macroscopic soft scaffolds of DAs. The current work shows promising use for the fabrication of visible-light-controlled macroscopic scaffolds, offering the next generation of biomedical materials with visible-light-controlled microenvironments and future soft-robotic systems.

Scalable Approach to Molecular Motor-Polymer Conjugates for Light-Driven Artificial Muscles

The integration of molecular machines and motors into materials represents a promising avenue for creating dynamic and functional molecular systems, with potential applications in soft robotics or reconfigurable biomaterials. However, the development of truly scalable and controllable approaches for incorporating molecular motors into polymeric matrices has remained a challenge. Here, it is shown that light-driven molecular motors with sensitive photo-isomerizable double bonds can be converted into initiators for Cu-mediated controlled/living radical polymerization enabling the synthesis of star-shaped motor-polymer conjugates. This approach enables scalability, precise control over the molecular structure, block copolymer structures, and high-end group fidelity. Moreover, it is demonstrated that these materials can be crosslinked to form gels with quasi-ideal network topology, exhibiting light-triggered contraction. The influence of arm length and polymer structure is investigated, and the first molecular dynamics simulation framework to gain deeper insights into the contraction processes is developed. Leveraging this scalable methodology, the creation of bilayer soft robotic devices and cargo-lifting artificial muscles is showcased, highlighting the versatility and potential applications of this advanced polymer chemistry approach. It is anticipated that the integrated experimental and simulation framework will accelerate scalable approaches for active polymer materials based on molecular machines, opening up new horizons in materials science and bioscience.

Unraveling the Dynamic Molecular Motions of a Twin-Cavity Cage with Slow Configurational but Rapid Conformational Interconversions

Featuring diverse structural motions/changes, dynamic molecular systems hold promise for executing complex tasks. However, their structural complexity presents formidable challenge in elucidating their kinetics, especially when multiple structural motions are intercorrelated. We herein introduce a twin-cavity cage that features interconvertible C3- and C1-configurations, with each configuration exhibiting interchangeable P- and M-conformations. This molecule is therefore composed of four interconnected chiral species (P)-C3, (M)-C3, (P)-C1, (M)-C1. We showcase an effective approach to decouple these sophisticated structural changes into two kinetically distinct pathways. Utilizing time-dependent 1H NMR spectroscopy at various temperatures, which disregards the transition between mirror-image conformations, we first determine the rate constant (kc) for the C3- to C1-configuration interconversion, while time-dependent circular dichroism spectroscopy at different temperatures quantifies the observed rate constant (kobs) of the ensemble of all the structural changes. As kobs ≫ ${{\rm { \gg }}}$ kc, it allows us to decouple the overall molecular motions into a slow configurational transformation and rapid conformational interconversions, with the latter further dissected into two independent conformational interchanges, namely (P)-C3← → ${ \mathbin{{\stackrel{\textstyle\rightarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }$ (M)-C3 and (P)-C1← → ${ \mathbin{{\stackrel{\textstyle\rightarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }$ (M)-C1. This work, therefore, sheds light on the comprehensive kinetic study of complex molecular dynamics, offering valuable insights for the rational design of smart dynamic materials for applications of sensing, separation, catalysis, molecular machinery, etc.

An ultrawide-range photochromic molecular fluorescence emitter

Photocontrollable luminescent molecular switches capable of changing emitting color have been regarded as the ideal integration between intelligent and luminescent materials. A remaining challenge is to combine good luminescence properties with wide range of wavelength transformation, especially when confined in a single molecular system that forms well-defined nanostructures. Here, we report a π-expanded photochromic molecular photoswitch, which allows for the comprehensive achievements including wide emission wavelength variation (240 nm wide, 400-640 nm), high photoisomerization extent (95%), and pure emission color (<100 nm of full width at half maximum). We take the advantageous mechanism of modulating self-assembly and intramolecular charge transfer in the synthesis and construction, and further realize the full color emission by simple photocontrol. Based on this, both photoactivated anti-counterfeiting function and self-erasing photowriting films are achieved of fluorescence. This work will provide insight into the design of intelligent optical materials.

Structure and isomerization behavior relationships of new push-pull azo-pyrrole photoswitches

A family of stilbenyl-azopyrroles compounds 2a-d and 3a-d was efficiently obtained via a Mizoroki-Heck C-C-type coupling reaction between 2-(4'-iodophenyl-azo)-N-methyl pyrrole (1a) and different vinyl precursors. The influence of the π-conjugated backbone and the effect of the pyrrole moiety were correlated with their optical properties. Studies via UV-Visible spectrophotometry revealed that the inclusion of EWG or EDG favors a red-shift of the main absorption band in these azo compounds compared with their non-substituted analogues. Furthermore, there is a clear influence between the half-life of the Z isomer formed by irradiation with white light and the push-pull behavior of the molecules. In several cases, the stilbenyl-azopyrroles led to the formation of J-type aggregates in binary MeOH : H2O solvents, which are of interest for water compatible applications.

Formation and Manipulation of Diatomic Rotors at the Symmetry-Breaking Surfaces of a Kagome Superconductor

Construction of diatomic rotors, which is crucial for artificial nanomachines, remains challenging due to surface constraints and limited chemical design. Here we report the construction of diatomic Cr-Cs and Fe-Cs rotors where a Cr or Fe atom switches around a Cs atom at the Sb surface of the newly discovered kagome superconductor CsV3Sb5. The switching rate is controlled by the bias voltage between the rotor and scanning tunneling microscope (STM) tip. The spatial distribution of rates exhibits C2 symmetry, possibly linked to the symmetry-breaking charge orders of CsV3Sb5. We have expanded the rotor construction to include different transition metals (Cr, Fe, V) and alkali metals (Cs, K). Remarkably, designed configurations of rotors are achieved through STM manipulation. Rotor orbits and quantum states are precisely controlled by tuning the inter-rotor distance. Our findings establish a novel platform for the controlled fabrication of atomic motors on symmetry-breaking quantum materials, paving the way for advanced nanoscale devices.

Red-light-controlled supramolecular assemblies of indigo amphiphiles at multiple length scales

Amphiphilic molecules functionalized with photoresponsive motifs have attractive prospects for applications in smart functional bio-material ranging from cell-material interfaces to drug delivery systems owing to the precisely controllable functionality of self-assembled hierarchical supramolecular structures in aqueous media by a non-invasive light stimulation with high temporal- and spatial-resolution. However, most of reported photoresponsive amphiphiles are triggered by bio-damaging UV-light, which greatly limits the potential in bio-related applications. Herein, we present newly designed red-light controlled N,N'-diaryl-substituted indigo amphiphiles (IA), exhibiting excellent photoswitchablity and photostability with dual red-/green-light in organic media. Meanwhile, aqueous solutions of IA assembled into supramolecular structures in both microscopic and macroscopic length-scale, though the photoresponsiveness of IA is slightly compromised in aqueous media. At macroscopic length-scale, morphological changes of IA macroscopic scaffold prepared by a shear-flow method can be fine adjusted upon red-light irradiation. Moreover, the preferential attachment of live h-MSCs to IA macroscopic scaffold surface also indicates a good biocompatibility of IA macroscopic scaffold. These results provide the potential for developing the next generation of red-light controlled soft functional materials with good biocompatibility.

Optical Phenomena in Molecule-Based Magnetic Materials

Since the last century, we have witnessed the development of molecular magnetism which deals with magnetic materials based on molecular species, i.e., organic radicals and metal complexes. Among them, the broadest attention was devoted to molecule-based ferro-/ferrimagnets, spin transition materials, including those exploring electron transfer, molecular nanomagnets, such as single-molecule magnets (SMMs), molecular qubits, and stimuli-responsive magnetic materials. Their physical properties open the application horizons in sensors, data storage, spintronics, and quantum computation. It was found that various optical phenomena, such as thermochromism, photoswitching of magnetic and optical characteristics, luminescence, nonlinear optical and chiroptical effects, as well as optical responsivity to external stimuli, can be implemented into molecule-based magnetic materials. Moreover, the fruitful interactions of these optical effects with magnetism in molecule-based materials can provide new physical cross-effects and multifunctionality, enriching the applications in optical, electronic, and magnetic devices. This Review aims to show the scope of optical phenomena generated in molecule-based magnetic materials, including the recent advances in such areas as high-temperature photomagnetism, optical thermometry utilizing SMMs, optical addressability of molecular qubits, magneto-chiral dichroism, and opto-magneto-electric multifunctionality. These findings are discussed in the context of the types of optical phenomena accessible for various classes of molecule-based magnetic materials.

Out-of-Equilibrium Mechanical Disruption of β-Amyloid-Like Fibers using Light-Driven Molecular Motors

Artificial molecular motors have the potential to generate mechanical work on their environment by producing autonomous unidirectional motions when supplied with a source of energy. However, the harnessing of this mechanical work to subsequently activate various endoenergetic processes that can be useful in materials science remains elusive. Here, it is shown that by integrating a light-driven rotary motor through hydrogen bonds in a β-amyloid-like structure forming supramolecular hydrogels, the mechanical work generated during the constant rotation of the molecular machine under UV irradiation is sufficient to disrupt the β-amyloid fibers and to trigger a gel-to-sol transition at macroscopic scale. This melting of the gel under UV irradiation occurs 25 °C below the temperature needed to melt it by solely using thermal activation. In the dark, a reversible sol-gel transition is observed as the system fully recovers its original microstructure, thus illustrating the possible access to new kinds of motorized materials that can be controlled by advanced out-of-equilibrium thermodynamics.

Control of Photoisomerization Kinetics via Multistage Switching in Bimetallic Ru(II)-Terpyridine Complexes

In this study, we carried out detailed experimental and theoretical investigation on photophysical, electrochemical, and photoisomerization behaviors of a new array of luminescent binuclear Ru(II) complexes derived from a phenylene-vinylene-substituted terpyridyl ligand possessing RT lifetimes within 60.3-410.5 ns. The complexes experienced trans-to-cis isomerization in MeCN on irradiation with visible light, accompanied by significant changes in their absorption and emission spectral profiles. The reverse cis-to-trans process is also possible with the use of ultraviolet (UV) light. On conversion from trans to cis isomers, the emission intensity increases substantially, while for the reverse process, luminescence quenching occurs. Thus, "off-on" and "on-off" emission switching is facilitated upon treatment with visible and UV light alternatively. By the use of chemical oxidants (ceric ammonium nitrate and potassium permanganate) and reductants (metallic sodium) as well as light of appropriate wavelengths, multistate switching phenomena involving reversible oxidation-reduction and trans-cis isomerization have been achieved. Interestingly, the rate of this multistate photoswitching process becomes much faster compared to only two-state trans-cis isomerization of these complexes. Density functional theory (DFT) and time-dependent-DFT (TD-DFT) calculations are also performed to obtain a clear picture of the electronic environment of the complexes and also for the appropriate assignment of absorption and emission spectral bands.

Photoswitchable Cascades for Allosteric and Bidirectional Control over Covalent Bonds and Assemblies

Studies of complex systems and emerging properties to mimic biosystems are at the forefront of chemical research. Dynamic multistep cascades, especially those exhibiting allosteric regulation, are challenging. Herein, we demonstrate a versatile platform of photoswitchable covalent cascades toward remote and bidirectional control of reversible covalent bonds and ensuing assemblies. The relay of a photochromic switch, keto-enol equilibrium, and ring-chain equilibrium allows light-mediated reversible allosteric structural changes. The accompanying distinct reactivity further enables photoswitchable dynamic covalent bonding and release of substrates bidirectionally through alternating two wavelengths of light, essentially realizing light-mediated signaling cycles. The downfall of energy by covalent bond formation/scission upon photochemical reactions offers the driving force for the controlled direction of the cascade. To show the molecular diversity, photoswitchable on-demand assembly/disassembly of covalent polymers, including structurally reconfigurable polymers, was realized. This work achieves photoswitchable allosteric regulation of covalent architectures within dynamic multistep cascades, which has rarely been reported before. The results resemble allosteric control within biological signaling networks and should set the stage for many endeavors, such as dynamic assemblies, molecular motors, responsive polymers, and intelligent materials.

Collective Molecular Machines: Multidimensionality and Reconfigurability

Molecular machines are key to cellular activity where they are involved in converting chemical and light energy into efficient mechanical work. During the last 60 years, designing molecular structures capable of generating unidirectional mechanical motion at the nanoscale has been the topic of intense research. Effective progress has been made, attributed to advances in various fields such as supramolecular chemistry, biology and nanotechnology, and informatics. However, individual molecular machines are only capable of producing nanometer work and generally have only a single functionality. In order to address these problems, collective behaviors realized by integrating several or more of these individual mechanical units in space and time have become a new paradigm. In this review, we comprehensively discuss recent developments in the collective behaviors of molecular machines. In particular, collective behavior is divided into two paradigms. One is the appropriate integration of molecular machines to efficiently amplify molecular motions and deformations to construct novel functional materials. The other is the construction of swarming modes at the supramolecular level to perform nanoscale or microscale operations. We discuss design strategies for both modes and focus on the modulation of features and properties. Subsequently, in order to address existing challenges, the idea of transferring experience gained in the field of micro/nano robotics is presented, offering prospects for future developments in the collective behavior of molecular machines.

Solid State Machinery of Multiple Dynamic Elements in a Metal-Organic Framework

Engineering coordinated rotational motion in porous architectures enables the fabrication of molecular machines in solids. A flexible two-fold interpenetrated pillared Metal-Organic Framework precisely organizes fast mobile elements such as bicyclopentane (BCP) (107  Hz regime at 85 K), two distinct pyridyl rotors and E-azo group involved in pedal-like motion. Reciprocal sliding of the two sub-networks, switched by chemical stimuli, modulated the sizes of the channels and finally the overall dynamical machinery. Actually, iodine-vapor adsorption drives a dramatic structural rearrangement, displacing the two distinct subnets in a concerted piston-like motion. Unconventionally, BCP mobility increases, exploring ultra-fast dynamics (107  Hz) at temperatures as low as 44 K, while the pyridyl rotors diverge into a faster and slower dynamical regime by symmetry lowering. Indeed, one pillar ring gained greater rotary freedom as carried by the azo-group in a crank-like motion. A peculiar behavior was stimulated by pressurized CO2, which regulates BCP dynamics upon incremental site occupation. The rotary dynamics is intrinsically coupled to the framework flexibility as demonstrated by complementary experimental evidence (multinuclear solid-state NMR down to very low temperatures, synchrotron radiation XRD, gas sorption) and computational modelling, which helps elucidate the highly sophisticated rotor-structure interplay.

Photochemically and Thermally Programmed Optical Multi-States from a Single Diacetylene-Functionalized Cyanostilbene Luminogen

To develop advanced optical systems, many scientists have endeavored to create smart optical materials which can tune their photophysical properties by changing molecular states. However, optical multi-states are obtained usually by mixing many dyes or stacking multi-layered structures. Here, multiple molecular states are tried to be generated with a single dye. In order to achieve the goal, a diacetylene-functionalized cyanostilbene luminogen (DACSM) is newly synthesized by covalently connecting diacetylene and cyanostilbene molecular functions. Photochemical reaction of cyanostilbene and topochemical polymerization of diacetylene can change the molecular state of DACSM. By thermal stimulations and the photochemical reaction, the conformation of polymerized DACSM is further tuned. The synergetic molecular cooperation of cyanostilbene and diacetylene generates multiple molecular states of DACSM. Utilizing the optical multi-states achieved from the newly developed DACSM, switchable optical patterns and smart secret codes are successfully demonstrated.

Light, Heat, and Force-Responsive Polyolefins

Stimuli-responsive polymers have found applications as shape-memory materials, optical switches, and sensors, but the installation of these responsive properties in non-polar and inert polyolefins is challenging. In this contribution, a series of spiropyran (SP)-based comonomers are synthesized and copolymerized with ethylene or ethylene/cyclic monomers. In addition to great mechanical and surface properties, these functionalized polyolefins responded to light, heat, and force, which induced changes in the polymer structure to transmit color or mechanical signals. These interesting responsive properties are also installed in a series of commercial polyolefin materials through reactive extrusion, making the scalable production of these materials possible.

Multiple control of azoquinoline based molecular photoswitches

Multi-addressable molecular switches with high sophistication are creating intensive interest, but are challenging to control. Herein, we incorporated ring-chain dynamic covalent sites into azoquinoline scaffolds for the construction of multi-responsive and multi-state switching systems. The manipulation of ring-chain equilibrium by acid/base and dynamic covalent reactions with primary/secondary amines allowed the regulation of E/Z photoisomerization. Moreover, the carboxyl and quinoline motifs provided recognition handles for the chelation of metal ions and turning off photoswitching, with otherwise inaccessible Z-isomer complexes obtained via the change of stimulation sequence. Particularly, the distinct metal binding behaviors of primary amine and secondary amine products offered a facile way for modulating E/Z switching and dynamic covalent reactivity. As a result, multiple control of azoarene photoswitches was accomplished, including light, pH, metal ions, and amine nucleophiles, with interplay between diverse stimuli further enabling addressable multi-state switching within reaction networks. The underlying structural and mechanistic insights were elucidated, paving the way for the creation of complex switching systems, molecular assemblies, and intelligent materials.

A confinement-regulated (H3C-NH3)+ ion as a smallest dual-wheel rotator showing bisected rotation dynamics

On the basis of variable-temperature single-crystal X-ray diffraction, rotational energy barrier analysis, variable-temperature/frequency dielectric response, and molecular dynamics simulations, here we report a new crystalline supramolecular rotor (CH3NH3)(18-crown-6)[CuCl3], in which the (H3C-NH3)+ ion functions as a smallest dual-wheel rotator showing bisected rotation dynamics, while the host 18-crown-6 macrocycle behaves as a stator that is not strictly stationary. This study also provides a helpful insight into the dynamics of ubiquitous -CH3/-NH3 groups confined in organic or organic-inorganic hybrid solids.

Theoretical trends in the dynamics simulations of molecular machines across multiple scales

Over the past few decades, molecular machines have been extensively studied, since they are composed of single molecules for functional materials capable of responding to external stimuli, enabling motion at scales ranging from the microscopic to the macroscopic level within molecular aggregates. This advancement holds the potential to efficiently transform external resources into mechanical movement, achieved through precise control of conformational changes in stimuli-responsive materials. However, the underlying mechanism that links microscopic and macroscopic motions remains unclear, demanding computational development associated with simulating the construction of molecular machines from single molecules. This bottleneck has impeded the design of more efficient functional materials. Advancements in theoretical simulations have successfully been developed in various computational models to unveil the operational mechanisms of stimulus-responsive molecular machines, which could help us reduce the costs in experimental trial-and-error procedures. It opens doors to the computer-aided design of innovative functional materials. In this perspective, we have reviewed theoretical approaches employed in simulating dynamic processes involving conformational changes in molecular machines, spanning different scales and environmental conditions. In addition, we have highlighted current challenges and anticipated future trends in the collective control of aggregates within molecular machines. Our goal is to provide a comprehensive overview of recent theoretical advancements in the field of molecular machines, offering valuable insights for the design of novel smart materials.

Self-Assembly of Discrete Oligomers of Naphthalenediimides in Bulk and on Surfaces

Here, we report on the synthesis of discrete oligomers of alkyl-bridged naphthalenediimides (NDIs) and study their molecular nanostructures both in bulk, in solution, and at the liquid-solid interface. Via an iterative synthesis method, multiple NDI cores were bridged with short and saturated alkyl-diamines (C3 and C12 ) or long and unsaturated alkyl-diamines (u2 C33 to u8 C100 ) at their imide termini. The strong intermolecular interaction between the NDI cores was observed by probing their photophysical properties in solution. In bulk, the discrete NDI oligomers preferentially ordered in lamellar morphologies, irrespective of whether a saturated or unsaturated spacer was employed. Moreover, both the molecular architecture as well as the crystallization conditions play a significant role in the nanoscale ordering. The long unsaturated alkyl chains lead preferably to folded-chain conformations while their saturated analogues form stretched arrangements. At the solution-solid interface, well-defined lamellar regions were observed. These results show that precision in chemical structure alone is not sufficient to reach well-defined structures of discrete oligomers, but that it must be combined with precision in processing conditions.

Highly Ordered Co-Assembly of Bisurea Functionalized Molecular Switches at the Solid-Liquid Interface

Immobilization of stimulus-responsive systems on solid surfaces is beneficial for controlled signal transmission and adaptive behavior while allowing the characterization of the functional interface with high sensitivity and high spatial resolution. Positioning of the stimuli-responsive units with nanometer-scale precision across the adaptive surface remains one of the bottlenecks in the extraction of cooperative function. Nanoscale organization, cooperativity, and amplification remain key challenges in bridging the molecular and the macroscopic worlds. Here we report on the design, synthesis, and scanning tunneling microscopy (STM) characterization of overcrowded alkene photoswitches merged in self-assembled networks physisorbed at the solid-liquid interface. A detailed anchoring strategy that ensures appropriate orientation of the switches with respect to the solid surface through the use of bis-urea groups is presented. We implement a co-assembly strategy that enables the merging of the photoswitches within physisorbed monolayers of structurally similar 'spacer' molecules. The self-assembly of the individual components and the co-assemblies was examined in detail using (sub)molecular resolution STM which confirms the robust immobilization and controlled orientation of the photoswitches within the spacer monolayers. The experimental STM data is supported by detailed molecular mechanics (MM) simulations. Different designs of the switches and the spacers were investigated which allowed us to formulate guidelines that enable the precise organization of the photoswitches in crystalline physisorbed self-assembled molecular networks.

Rational Design of Stimuli-Responsive Inorganic 2D Materials via Molecular Engineering: Toward Molecule-Programmable Nanoelectronics

The ability of electronic devices to act as switches makes digital information processing possible. Succeeding graphene, emerging inorganic 2D materials (i2DMs) have been identified as alternative 2D materials to harbor a variety of active molecular components to move the current silicon-based semiconductor technology forward to a post-Moore era focused on molecule-based information processing components. In this regard, i2DMs benefits are not only for their prominent physiochemical properties (e.g., the existence of bandgap), but also for their high surface-to-volume ratio rich in reactive sites. Nonetheless, since this field is still in an early stage, having knowledge of both i) the different strategies for molecularly functionalizing the current library of i2DMs, and ii) the different types of active molecular components is a sine qua non condition for a rational design of stimuli-responsive i2DMs capable of performing logical operations at the molecular level. Consequently, this Review provides a comprehensive tutorial for covalently anchoring ad hoc molecular components-as active units triggered by different external inputs-onto pivotal i2DMs to assess their role in the expanding field of molecule-programmable nanoelectronics for electrically monitoring bistable molecular switches. Limitations, challenges, and future perspectives of this emerging field which crosses materials chemistry with computation are critically discussed.

Controlled Supramolecular Assemblies of Chiral Cyclometalated Gold (III) Amphiphiles in Aqueous Media

Gold (III) cyclometalated based amphiphiles in aqueous media have been revealed with excellent supramolecular transformations to external stimuli to open new pathways for soft functional material fabrications. Herein, we report a new chiral cyclometalated gold (III) amphiphile (GA) assembling into lamellar nanostructures in aqueous media confirmed with transmission electron microscopy (TEM). Counterion exchange with D-, L-, or racemic-camphorsulfonates features the significant supramolecular helicity enhancements, enabling transformations of GA from lamellar structure to vesicles and to nanotubes with multi-equivalents of counterion. The limited cytotoxicity of GA in aqueous media exhibits good biocompatibility.

Reversible Switching Based on Truly Intramolecular Long-Range Proton Transfer─Turning the Theoretical Concept into Experimental Reality

Herein, we demonstrate a working prototype of a conjugated proton crane, a reversible tautomeric switching molecule in which truly intramolecular long-range proton transfer occurs in solution at room temperature. The system consists of a benzothiazole rotor attached to a 7-hydroxy quinoline stator. According to the experimental and theoretical results, the OH proton is delivered under irradiation to the quinolyl nitrogen atom through a series of consecutive proton transfer and twisting steps. The use of a rigid rotor prevents undesired side processes that decrease the switching performance in previously described proton cranes and provides an unprecedented switching efficiency and fatigue resistance. The newly designed system confirms the theoretical concept for the application of proton transfer-initiated intramolecular twisting as the switching mechanism, developed more than 10 years ago, and provides unique insights for the further development of tautomeric molecular switches and motors, molecular logic gates, and new molecular-level energy storage systems.

A Proof-of-Principle Design for Through-Space Transmission of Unidirectional Rotary Motion by Molecular Photogears

The construction of molecular photogears that can achieve through-space transmission of the unidirectional double-bond rotary motion of light-driven molecular motors onto a remote single-bond axis is a formidable challenge in the field of artificial molecular machines. Here, we present a proof-of-principle design of such photogears that is based on the possibility of using stereogenic substituents to control both the relative stabilities of two helical forms of the photogear and the double-bond photoisomerization reaction that connects them. The potential of the design was verified by quantum-chemical modeling through which photogearing was found to be a favorable process compared to free-standing single-bond rotation ("slippage"). Overall, our study unveils a surprisingly simple approach to realizing unidirectional photogearing.

Photoresponsive peptide materials: Spatiotemporal control of self-assembly and biological functions

Peptides work as both functional molecules to modulate various biological phenomena and self-assembling artificial materials. The introduction of photoresponsive units to peptides allows the spatiotemporal remote control of their structure and function upon light irradiation. This article overviews the photoresponsive peptide design, interaction with biomolecules, and applications in self-assembling materials over the last 30 years. Peptides modified with photochromic (photoisomerizable) molecules, such as azobenzene and spiropyran, reversibly photo-controlled the binding to biomolecules and nanostructure formation through self-assembly. Photocleavable molecular units irreversibly control the functions of peptides through cleavage of the main chain and deprotection by light. Photocrosslinking between peptides or between peptides and other biomolecules enhances the structural stability of peptide assemblies and complexes. These photoresponsive peptides spatiotemporally controlled the formation and dissociation of peptide assemblies, gene expressions, protein-drug interactions, protein-protein interactions, liposome deformation and motility, cytoskeleton structure and stability, and cell functions by appropriate light irradiation. These molecular systems can be applied to photo-control biological functions, molecular robots, artificial cells, and next-generation smart drug delivery materials.

Daisy chain architectures: from discrete molecular entities to polymer materials

Daisy chain architectures, made by the self-complementary threading of an axle covalently linked to a macrocycle, represent a particularly intriguing family of supramolecular and mechanically interlocked (macro)molecules. In this review, we discuss their recent history, their modular chemical structures, and the various synthetic strategies to access them. We also detail how their internal sliding motions can be controlled and how their integration within polymers can amplify that motions up to the macroscopic scale. This overview of the literature demonstrates that the peculiar structure and dynamics of daisy chains have already strongly influenced the research on artificial molecular machines, with the potential to be implemented from nanometric switchable devices to mechanically active soft-matter materials.

An Electron Spin Resonance Study Comparing Nanometer-Nanosecond Dynamics in Diblock Copolymers and Their Poly(methyl Methacrylate) Binary Blends

Block copolymers are a class of materials that are particularly interesting with respect to their capability to self-assemble in ordered structures. In this context, the coupling between environment and dynamics is particularly relevant given that movements at the molecular level influence various properties of macromolecules. Mixing the polymer with a second macromolecule appears to be an easy method for studying these relationships. In this work, we studied blends of poly(methyl methacrylate) (PMMA) and a block copolymer composed of PMMA as the first block and poly(3-methyl-4-[6-(methylacryloyloxy)-hexyloxy]-4'-pentyloxy azobenzene) as the second block. The relaxational properties of these blends were investigated via electron spin resonance (ESR) spectroscopy, which is sensitive to nanometric length scales. The results of the investigations on the blends were related to the dynamic behavior of the copolymers. At the nanoscale, the study revealed the presence of heterogeneities, with slow and fast dynamics available for molecular reorientation, which are further modulated by the ability of the block copolymers to form supramolecular structures. For blends, the heterogeneities at the nanoscale were still detected. However, it was observed that the presence of the PMMA as a major component of the blends modified their dynamic behavior.

Allosterically Driven Assembly of a Multisite Cage-Based [2]Semirotaxane

The assembly of a [2]semirotaxane from a half-dumbbell endowed with a pyrazine coordination site and a bis-Zn(II) porphyrin cage as a multisite ring is reported. The threading is allosterically driven by the coordination of silver(I) ions to the multiple binding sites of the cage linkers, as shown by NMR studies. Addition of chloride ions destabilizes [2]semirotaxane, leading to its disassembly into its cage and half-dumbbell components.

Phase Transition-Promoted Rapid Photomechanical Motions of Single Crystals of a Triene Coordination Polymer

Molecular crystals with the ability to transform light energy into macroscopic mechanical motions are a promising class of materials with potential applications in actuating and photonic devices. In regard to such materials, coordination polymers that exhibit dynamic photomechanical motion, associated with a phase transition, are unknown. Herein, we report an intriguing photoactive, one-dimensional ZnII coordination polymer, 1, derived from 1,3,5-tri-4-pyridyl-1,2-ethenylbenzene and 3,5-difluorobenzoate. Single crystals of 1 under UV light irradiation exhibit rapid shrinking and bending, violent bursting-jumping, splitting, and cracking behavior. Single-crystal X-ray diffraction analysis and 1 H NMR spectroscopy reveal an unusual photoinduced phase transition involving a single-crystal-to-single-crystal [2+2] cycloaddition reaction that results in photomechanical responses. Interestingly, crystals of 1, which are triclinic with space groupP 1 ‾ ${P\bar{1}}$ , are transformed into a higher symmetry, monoclinic cell with space group C2/c. This process represents a rare example of symmetry enhancement upon photoirradiation. The photomechanical activity is likely due to the sudden release of stress associated with strained molecular geometries and significant solid-state molecular movement arising from cleavage and formation of chemical bonds. A composite membrane fabricated from 1 and polyvinyl alcohol (PVA) also displays interesting photomechanical behavior under UV light illumination, indicating the material's potential as a photoactuator.

Thermally Stable Photomechanical Molecular Hinge: Sterically Hindered Stiff-Stilbene Photoswitch Mechanically Isomerizes

Molecular photoswitches are extensively used as molecular machines because of the small structures, simple motions, and advantages of light including high spatiotemporal resolution. Applications of photoswitches depend on the mechanical responses, in other words, whether they can generate motions against mechanical forces as actuators or can be activated and controlled by mechanical forces as mechanophores. Sterically hindered stiff stilbene (HSS) is a promising photoswitch offering large hinge-like motions in the E/Z isomerization, high thermal stability of the Z isomer, which is relatively unstable compared to the E isomer, with a half-life of ca. 1000 years at room temperature, and near-quantitative two-way photoisomerization. However, its mechanical response is entirely unexplored. Here, we elucidate the mechanochemical reactivity of HSS by incorporating one Z or E isomer into the center of polymer chains, ultrasonicating the polymer solutions, and stretching the polymer films to apply elongational forces to the embedded HSS. The present study demonstrated that HSS mechanically isomerizes only in the Z to E direction and reversibly isomerizes in combination with UV light, i.e., works as a photomechanical hinge. The photomechanically inducible but thermally irreversible hinge-like motions render HSS unique and promise unconventional applications differently from existing photoswitches, mechanophores, and hinges.

The Diversity of Cucurbituril Molecular Switches and Shuttles

Ring translocation switches and shuttles featuring a macrocycle (or a ring molecule) navigating between two or more stations continue to attract attention. While the vast majority of these systems are developed in organic solvents, the cucurbituril (CB) macrocycles are ideally suited to prepare such systems in water. Indeed, their stability and their relatively high affinity for relevant guest molecules are key attributes toward translating the progresses made in organic solvents, into water. This concept article summarizes the findings, key advances and multiple possibilities offered by CBs toward advanced molecular switches and shuttles in water.

Rapid Access to Encapsulated Molecular Rotors via Coordination-Driven Macrocycle Formation

Macrocycle formation that relies upon trans metal coordination of appropriately placed pyridine ligands within an arylene ethynylene construct provides rapid and reliable access to molecular rotators encapsulated within macrocyclic stators. Showing no significant close contacts to the central rotators, X-ray crystallography of AgI -coordinated macrocycles provides plausibility for unobstructed rotation or wobbling of rotators within the central cavity. Solid-state 13 C NMR of PdII -coordinated macrocycles supports the notion of unobstructed movement of simple arenes in the crystal lattice. Solution 1 H NMR studies indicate complete and immediate macrocycle formation upon the introduction of PdII to the pyridyl-based ligand at room temperature. Moreover, the formed macrocycle is stable in solution; a lack of significant changes in the 1 H NMR spectrum upon cooling to -50 °C is consistent with the absence of dynamic behavior. The synthetic route to these macrocycles is expedient and modular, providing access to rather complex constructs in four simple steps involving Sonogashira coupling and deprotection reactions.

Probing Near-infrared Absorbance of E and Z Diazene Isomers via Antiaromaticity

The photoswitching behaviors of heteroaryl azos and azobenzenes have attracted considerable interest due to their applications from material science to pharmacology. However, the use of UV light limits their application, especially in biomedicine and photopharmacology. In this work, using several aromaticity descriptors, including anisotropy of the induced current density analysis and nucleus-independent chemical shifts, we systematically investigate the relationship between anti-aromaticity and the absorption of a series of heterocyclic azos. We have demonstrated that the antiaromatic heterocycles substituted with diazenes enable the significant red shifts of the n → π* and π → π* transition bands of E and Z isomers via density functional theory calculations. Moreover, introducing substituents into heterocycles could further tune the absorption. Finally, the λmax of the first transition bands of the E (ca. 1026 nm) and Z isomers (ca. 1167 nm) of azos is achieved in the near-infrared region.

Solvent-Dependent Conformational Switching of N-Methyl-N,N'-diarylsquaramide

N,N'-Diarylsquaramide and N,N'-dialkylsquaramide are conformationally stable linkers with extended (trans, trans) and folded (cis, cis) structures, respectively, independently of external conditions. Here, we show that N-monomethylated N,N'-diarylsquaramides generally take a (trans, cis) structure in the crystal but show a solvent-dependent conformational equilibrium in solution. In particular, the stable conformer of N-methyl-N,N'-bis(1-naphthyl)squaramide (1f) changes depending upon the solvent. Thus, aromatic N-monomethylated squaramides could find application as components of environment-responsive molecular switches.

Photo-Induced Fluorochromism of a Star-Shaped Photochromic Dye with 2,4-Dimethylthiazole Attaching to Triangle Terthiophene

A photochrmic triangle terthiophene dye with 2,4-dimethylthiazole attached was synthesized and shows regular photochromic properties when irradiated with UV/Vis light alternately. It was found that the attaching of 2,4-dimethylthiazole has a significant effect on both the photochromism and fluorescence of triangle terthiophene. During the photocyclizatioin prcess, not only the color but also the fluorescence of the dye in THF can be toggled between ring-open and ring-closed forms of the dye. Additionally, the absolute quantum yields (AQY) of ring-open and ring-closed forms of the dye (0.32/0.58) were greatly larger than the literature report. Along with the 254 nm light irradiation, the fluorescence color changed from deep blue (428 nm) to sky blue (486 nm) in THF. A fluorochromism cycle could be established based on the UV/visible light irradiation cycle, which provides a strategy for the design of new type fluorescent diarylethene derivatives for biological application.

Multiply engaged molecular gears composed of a cerium(IV) double-decker of a triptycene-functionalized porphyrin

Intramolecular gearing motions are studied in a cerium(IV) double-decker of triptycene-functionalised porphyrins using single crystal X-ray analysis and variable temperature 1H-NMR.

Facile Photoresponsive Actuators Based on Ferrocene-Doped Poly(butyl methacrylate)

This paper presents facile photoresponsive actuators comprising ferrocene as a guest chromophore and poly(butyl methacrylate) (PBMA) as a host matrix. The ferrocene-doped PBMA film exhibits mechanical expansion and contraction when a 445 nm laser is turned on and off, respectively. The photoresponsive film is attached by a commercially available acetylcellulose adhesive tape, which exhibits a bending motion that is controlled by turning the laser on and off. Thereafter, the double-layer film is employed to fabricate a table-shaped lifting machine (0.7 mg) that lifts a 10.5 mg object up and down by turning the laser on and off, respectively, and the mechanical force offered by the double-layer film is recorded. Additionally, the film is coated with gold and applied to an electric circuit that serves as a reversible photoresponsive switch. This film preparation technique is applied to other chromophores (e.g., Coumarin 343, Rhodamine 6G, Sudan Blue II, and Solvent Green 3) to independently control the motions of the films with 445, 520, and 655 nm lasers. The ferrocene-containing films also exhibit photoinduced healing from mechanical damage. Finally, the photoirradiation-accompanied morphological changes in the film are observed via small-angle X-ray scattering.