Metal–Sulfur Compounds in N2 Reduction and Nitrogenase-Related Chemistry

Recovery of europium from E-waste using redox active tetrathiotungstate ligands

Rare-earth elements (REEs) are critical to our modern economy, yet their mining from natural ores bears a profound environmental impact. Traditional separation techniques are chemical and energy-intensive because their chemical similarities make REEs very challenging to purify, requiring multiple extraction steps to achieve high purity products. This emphasizes the need for sustainable and straightforward separation methods. Here we introduce a strategy for the direct separation of europium (Eu) from complex mixtures under ambient conditions, leveraging on the redox non innocence of purely inorganic tungsten tetrathiolate (WS42-) ligands. The recovery of Eu is achieved upon reduction of Eu(III) to a Eu(II) coordination polymer, driven by an induced internal electron transfer from the tetrathiotungstate ligand. Applying this strategy to unconventional feedstock such as spent energy-saving lamps allows selective europium recovery with separation factors over 1000 and recovery efficiency as high as 99% without pre-treatment of the waste.

Iron(I) Complex Bearing an Open-Shell Diazenido Ligand

Low-valent transition-metal diazenido species are important intermediates in transition-metal-mediated dinitrogen reduction reactions. Isolable complexes of the type unanimously feature closed-shell diazenido ligands. Those bearing open-shell diazenido ligands have remained elusive. Herein, we report the synthesis, characterization, and reactivity of a d7 iron(I) complex featuring an open-shell silyldiazenido ligand, [(ICy)Fe(NNSiiPr3)(η2:η2-dvtms)] (1, ICy = 1,3-dicyclohexylimidazole-2-ylidene, dvtms = divinyltetramethyldisiloxane). Complex 1 is prepared in good yield by silylation of the iron(-I)-N2 complex [K(18-crown-6)][(ICy)Fe(N2)(η2:η2-dvtms)] with iPr3SiOTf and has been fully characterized by various spectroscopic methods. Theoretical studies, in combination with characterization data, established an S = 1/2 ground spin-state for 1 that can best be described as a quartet iron(I) center featuring an antiferromagnetically coupled triplet silyldiazenido ligand. The diazenido and alkene ligands in 1 are labile, as indicated by the facile disproportionation reaction of 1 at ambient temperature to transform into the iron(II) bis(diazenido) species [(ICy)(NNSiiPr3)2Fe(dvtms)Fe(NNSiiPr3)2(ICy)] (2) and the iron(0) species [(ICy)Fe(η2:η2-dvtms)] and also the alkene-exchange reaction of 1 with PhCH═CHBC8H14 to form [(ICy)Fe(NNSiiPr3)(η2-trans-PhCH═CHBC8H14)] (3). Complex 1 is light-sensitive. Upon photolysis, it undergoes a SiiPr3 radical-transfer reaction to yield [(ICy)Fe(σ:η2-MeCHSiMe2OSiMe2CH═CHSiiPr3)] (4) and N2. The reactions of 1 with the trityl radical and organic bromides yield iron(II) complexes, which indicates its reducing nature. Moreover, 1 is a weak hydrogen-atom abstractor, as indicated by its inertness toward HSi(SiMe3)3 and cyclohexa-1,4-diene and the low calculated N-H bond dissociation energy (48 kcal/mol) of its corresponding iron(II) iso-hydrazenido species.

Nonheme binuclear transition metal complexes with hydrosulfide and polychalcogenides

The intriguing chemistry of chalcogen (S, Se)-containing ligands and their capability to bridge multiple metal centres have resulted in a plethora of reports on transition metal complexes featuring hydrosulfide (HS-) and polychalcogenides (En2-, E = S, Se). While a large number of such molecules are strictly organometallic complexes, examples of non-organometallic complexes featuring HS- and En2- with N-/O-donor ligands are relatively rare. The general synthetic procedure for the transition metal-hydrosulfido complexes involves the reaction of the corresponding metal salts with HS-/H2S and this is prone to generate sulfido bridged oligomers in the absence of sterically demanding ligands. On the other hand, the synthetic methods for the preparation of transition metal-polychalcogenido complexes include the reaction of the corresponding metal salts with En2- or the two electron oxidation of low-valent metals with elemental chalcogen, often at an elevated temperature and/or for a long time. Recently, we have developed new synthetic methods for the preparation of two new classes of binuclear transition metal complexes featuring either HS-, or Sn2- and Sen2- ligands. The new method for the synthesis of transition metal-hydrosulfido complexes involved transition metal-mediated hydrolysis of thiolates at room temperature (RT), while the method for the synthesis of transition metal-polychalcogenido complexes involved redox reaction of coordinated thiolates and exogenous elemental chalcogens at RT. An overview of the synthetic aspects, structural properties and intriguing reactivity of these two new classes of transition metal complexes is presented.

Functionalization of 2-Mercapto-5-methyl-1,3,4-thiadiazole: 2-(ω-Haloalkylthio) Thiadiazoles vs. Symmetrical Bis-Thiadiazoles

A study on the functionalisation of 2-mercapto-5-methyl-1,3,4-thiadiazole has been conducted, yielding two series of products: 2-(ω-haloalkylthio)thiadiazoles and symmetrical bis-thiadiazoles, with variable chain lengths. The experimental conditions were optimised for each class of compounds by altering the base used and the reagents' proportions, leading to the development of separate protocols tailored to their specific reactivity and purification needs. The target halogenide reagents and bis-thiadiazole ligands were obtained either as single products or as mixtures easily separable by chromatography. Characterisation of the products was performed using 1D and 2D NMR spectra in solution, complemented by single crystal X-ray diffraction (XRD) for selected samples, to elucidate their structural properties.

Ultralow Thermal Conductivity of a Chalcogenide System Pt3Bi4Q9 (Q = S, Se) Driven by the Hierarchy of Rigid [Pt6Q12]12- Clusters Embedded in Soft Bi-Q Sublattice

Knowledge of structure-property relationships in solids with intrinsic low thermal conductivity is crucial for fields such as thermoelectrics, thermal barrier coatings, and refractories. Herein, we propose a new "rigidness in softness" structural scheme for intrinsic low lattice thermal conductivity (κL), which embeds rigid clusters into the soft matrix to induce large lattice anharmonicity, and accordingly discover a new series of chalcogenides Pt3Bi4Q9 (Q = S, Se). Pt3Bi4S9-xSex (x = 3, 6) achieved an intrinsic ultralow κL down to 0.39 W/(m K) at 773 K, which is considerably low among the Bi chalcogenide thermoelectric materials. Pt3Bi4Q9 contains the rigid cubic [Pt6Q12]12- clusters embedded in the soft Bi-Q sublattice, involving multiple bonding interactions and vibration hierarchy. The hierarchical structure yields a large lattice anharmonicity with high Grüneisen parameters (γ) 1.97 of Pt3Bi4Q9, as verified by the effective scatter of low-lying optical phonons toward heat-carrying acoustic phonons. Consequently, the rigid-soft coupling significantly inhibits heat propagation, exhibiting low acoustic phonon frequencies (∼25 cm-1) and Debye temperatures (ΘD = 170.4 K) in Pt3Bi4Se9. Owing to the suppressed κL and considerable power factor (PF), the ZT value of Pt3Bi4S6Se3 can reach 0.56 at 773 K without heavy carrier doping, which is competitive among the pristine Bi chalcogenides. Theoretical calculations predicted a large potential for performance improvement via proper doping, indicating the great potential of this structure type for promising thermoelectric materials.

The Feather Moss Hylocomium splendens Affects the Transcriptional Profile of a Symbiotic Cyanobacterium in Relation to Acquisition and Turnover of Key Nutrients

Moss-cyanobacteria symbioses were proposed to be based on nutrient exchange, with hosts providing C and S while bacteria provide N, but we still lack understanding of the underlying molecular mechanisms of their interactions. We investigated how contact between the ubiquitous moss Hylocomium splendens and its cyanobiont affects nutrient-related gene expression of both partners. We isolated a cyanobacterium from H. splendens and co-incubated it with washed H. splendens shoots. Cyanobacterium and moss were also incubated separately. After 1 week, we performed acetylene reduction assays to estimate N2 fixation and RNAseq to evaluate metatranscriptomes. Genes related to N2 fixation and the biosynthesis of several amino acids were up-regulated in the cyanobiont when hosted by the moss. However, S-uptake and the biosynthesis of the S-containing amino acids methionine and cysteine were down-regulated in the cyanobiont while the degradation of selenocysteine was up-regulated. In contrast, the number of differentially expressed genes in the moss was much lower, and almost no transcripts related to nutrient metabolism were affected. It is possible that, at least during the early stage of this symbiosis, the cyanobiont receives few if any nutrients from the host in return for N, suggesting that moss-cyanobacteria symbioses encompass relationships that are more plastic than a constant mutualist flow of nutrients.

Redox Processes Involving Oxygen: The Surprising Influence of Redox-Inactive Lewis Acids

Metalloenzymes with heteromultimetallic active sites perform chemical reactions that control several biogeochemical cycles. Transformations catalyzed by such enzymes include dioxygen generation and reduction, dinitrogen reduction, and carbon dioxide reduction-instrumental transformations for progress in the context of artificial photosynthesis and sustainable fertilizer production. While the roles of the respective metals are of interest in all these enzymatic transformations, they share a common factor in the transfer of one or multiple redox equivalents. In light of this feature, it is surprising to find that incorporation of redox-inactive metals into the active site of such an enzyme is critical to its function. To illustrate, the presence of a redox-inactive Ca2+ center is crucial in the Oxygen Evolving Complex, and yet particularly intriguing given that the transformation catalyzed by this cluster is a redox process involving four electrons. Therefore, the effects of redox inactive metals on redox processes-electron transfer, oxygen- and hydrogen-atom transfer, and O-O bond cleavage and formation reactions-mediated by transition metals have been studied extensively. Significant effects of redox inactive metals have been observed on these redox transformations; linear free energy correlations between Lewis acidity and the redox properties of synthetic model complexes are observed for several reactions. In this Perspective, these effects and their relevance to multielectron processes will be discussed.

Generation and Reactivity of Polychalcogenide Chains in Binuclear Cobalt(II) Complexes

A series of six binuclear Co(II)-thiolate complexes, [Co2(BPMP)(S-C6H4-o-X)2]1+ (X = OMe, 2; NH2, 3), [Co2(BPMP)(μ-S-C6H4-o-O)]1+ (4), and [Co2(BPMP)(μ-Y)]1+ (Y = bdt, 5; tdt, 6; mnt, 7), has been synthesized from [Co2(BPMP)(MeOH)2(Cl)2]1+ (1a) and [Co2(BPMP)(Cl)2]1+ (1b), where BPMP1- is the anion of 2,6-bis[[bis(2-pyridylmethyl)amino]methyl]-4-methylphenol. While 2 and 3 could allow the two-electron redox reaction of the two coordinated thiolates with elemental sulfur (S8) to generate [Co2(BPMP)(μ-S5)]1+ (8), the complexes, 4-7, could not undergo a similar reaction. An analogous redox reaction of 2 with elemental selenium ([Se]) produced [{Co2(BPMP)(μ-Se4)}{Co2(BPMP)(μ-Se3)}]2+ (9a) and [Co2(BPMP)(μ-Se4)]1+ (9b). Further reaction of these polychalcogenido complexes, 8 and 9a/9b, with PPh3 allowed the isolation of [Co2(BPMP)(μ-S)]1+ (10) and [Co2(BPMP)(μ-Se2)]1+ (11), which, in turn, could be converted back to 8 and 9a upon treatment with S8 and [Se], respectively. Interestingly, while the redox reaction of the polyselenide chains in 9a and 11 with S8 produced 8 and [Se], the treatment of 8 with [Se] gave back only the starting material (8), thus demonstrating the different redox behavior of sulfur and selenium. Furthermore, the reaction of 8 and 9a/9b with activated alkynes and cyanide (CN-) allowed the isolation of the complexes, [Co2(BPMP)(μ-E2C2(CO2R)2)]1+ (E = S: 12a, R = Me; 12b, R = Et; E = Se: 13a, R = Me; 13b, R = Et) and [Co2(BPMP)(μ-SH)(NCS)2] (14), respectively. The present work, thus, provides an interesting synthetic strategy, interconversions, and detailed comparative reactivity of binuclear Co(II)-polychalcogenido complexes.

Self-sacrificed BiOBr template-assisted synthesis of α-Bi2O3/Bi3O4Br heterojunctions with oxygen vacancies for enhanced photocatalytic nitrogen fixation

The catalytic conversion of nitrogen to ammonia is one of the most significant processes in nature and the chemical industry. However, the traditional Haber-Bosch process of ammonia synthesis consumes substantial energy and emits a large amount of carbon dioxide. The efficiency of photocatalytic N2 activation is severely limited by the lack of N2 adsorption sites and poor carrier utilization. Herein, an efficient α-Bi2O3/Bi3O4Br heterojunction is proposed with a photocatalytic nitrogen fixation activity of 238.67 μmol·g-1·h-1. Compared with the BiOBr precursor, α-Bi2O3 and Bi3O4Br, the α-Bi2O3/Bi3O4Br heterojunction with oxygen vacancies can improve the adsorption and activation capacity of N2 and promote the separation efficiency of charge carrier pairs by accommodating photogenerated electrons under visible light through the mechanism of N-type semiconductors. Therefore, oxygen vacancies and heterojunction engineering of semiconductive nanomaterials provide a promising method for the rational design of photocatalysts to enhance the rate of ammonia synthesis under mild conditions.

An orbitally adapted push-pull template for N2 activation and reduction to diazene-diide

A Lewis superacidic bis(borane) C6F4{B(C6F5)2}2 was reacted with tungsten N2-complexes [W(N2)2(R2PCH2CH2PR2)2] (R = Ph or Et), affording zwitterionic boryldiazenido W(ii) complexes trans-[W(L)(R2PCH2CH2PR2)2(N2{B(C6F5)2(C6F4B(C6F5)3})] (L = ø, N2 or THF). These compounds feature only one N-B linkage of the covalent type, as a result of intramolecular boron-to-boron C6F5 transfer. Complex trans-[W(THF)(Et2PCH2CH2PEt2)2(N2{B(C6F5)2C6F4B(C6F5)3})] (5) was shown to split H2, leading to a seven-coordinate complex [W(H)2(Et2PCH2CH2PEt2)2(N2{B(C6F5)2}2C6F4)] (7). Interestingly, hydride storage at the metal triggers backward C6F5 transfer. This reverts the bis(boron) moiety to its bis(borane) state, now doubly binding the distal N, with structural parameters and DFT computations pointing to dative N→B bonding. By comparison with an N2 complex [W(H)2(Et2PCH2CH2PEt2)2(N2{B(C6F5)3}] (10) differing only in the Lewis acid (LA), namely B(C6F5)3, coordinated to the distal N, we demonstrate that two-fold LA coordination imparts strong N2 activation up to the diazene-diide (N22-) state. To the best of our knowledge, this is the first example of a neutral LA coordination that induces reduction of N2.

Multireference Protonation Energetics of a Dimeric Model of Nitrogenase Iron-Sulfur Clusters

Characterizing the electronic structure of the iron-sulfur clusters in nitrogenase is necessary to understand their role in the nitrogen fixation process. One challenging task is to determine the protonation state of the intermediates in the nitrogen fixing cycle. Here, we use a dimeric iron-sulfur model to study relative energies of protonation at C, S, or Fe. Using a composite method based on coupled cluster and density matrix renormalization group energetics, we converge the relative energies of four protonated configurations with respect to basis set and correlation level. We find that accurate relative energies require large basis sets as well as a proper treatment of multireference and relativistic effects. We have also tested ten density functional approximations for these systems. Most of them give large errors in their relative energies. The best performing functional in this system is B3LYP, which gives mean absolute and maximum deviations of only 10 and 13 kJ/mol with respect to our correlated wave function estimates, respectively, comparable to the uncertainty in our correlated estimates. Our work provides benchmark results for the calibration of new approximate electronic structure methods and density functionals for these problems.

Mössbauer and Nuclear Resonance Vibrational Spectroscopy Studies of Iron Species Involved in N-N Bond Cleavage

Diketiminate-supported iron complexes are capable of cleaving the strong triple bond of N2 to give a tetra-iron complex with two nitrides (Rodriguez et al., Science, 2011, 334, 780-783). The mechanism of this reaction has been difficult to determine, but a transient green species was observed during the reaction that corresponds to a potential intermediate. Here, we describe studies aiming to identify the characteristics of this intermediate, using a range of spectroscopic techniques, including Mössbauer spectroscopy, electronic absorption spectroscopy, Raman spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and nuclear resonance vibrational spectroscopy (NRVS) complemented by density functional theory (DFT) calculations. We successfully elucidated the nature of the starting iron(II) species and the bis(nitride) species in THF solution, and in each case, THF breaks up the multiiron species. Various observations on the green intermediate species indicate that it has one N2 per two Fe atoms, has THF associated with it, and has NRVS features indicative of bridging N2. Computational models with a formally diiron(0)-N2 core are most consistent with the accumulated data, and on this basis, a mechanism for N2 splitting is suggested. This work shows the power of combining NRVS, Mössbauer, NMR, and vibrational spectroscopies with computations for revealing the nature of transient iron species during N2 cleavage.

One Ligand to Bind them All: S~C~S2- Carbon- and Sulfur-Based Gem-Dianion as Structuring Ligand for Iron Polymetallic Assemblies

Numerous synthetic models of the FeMo-co cluster of nitrogenases have been proposed to find the simplest structure with relevant reactivity. Indeed, such structures are able to perform multi-electrons reduction processes, such as the conversion of N2 to ammonia, and of CO2 into methane and alkenes. The most challenging parameter to imitate is indeed the central carbide ligand, which is believed to maintain the integrity of iron sulfide assembly during the course of catalytic cycles. The study proposes the use of bis(diphenylthiophosphinoyl)methanediide (SCS)2- as an ideal platform for the synthesis of bi- and tetra-metallic iron complexes, in which the iron-carbon interaction is maintained upon structural diversification and redox state changes.

Identification and Detection of Intracellular Reactive Sulfur Species Using a Reaction-Mediated Dual-Recognition Strategy

Reactive sulfur species (RSS) are emerging as a potential key gasotransmitter in diverse physiological processes linking two signaling molecules H2S and SO2. However, the exact roles of H2S and SO2 remain unclear. A major hurdle is the shortage of accurate and robust approaches for sensing of H2S and SO2 in biological systems. Herein, we report a reaction-mediated dual-recognition strategy-based nanosensor, silver nanoparticles (AgNPs)-loaded MIL-101 (Fe) (ALM) hybrids, for the simultaneous detection of H2S and SO2 in a living cell. Upon exposure to H2S, AgNPs can be oxidized to form Ag2S, causing a decrease of surface enhanced Raman spectroscopy (SERS) signals of p,p'-dimercaptoazobenzene. Moreover, SO2 reacts with the amino moiety of MIL-101 to form charge-transfer complexes, resulting in an increment of fluorescent (FL) intensity. The ALM with dual-modal signals can simultaneously analyze H2S and SO2 at a concentration as low as 2.8 × 10-6 and 0.003 μM, respectively. Most importantly, the ALM sensing platform enables targeting mitochondria and detection multiple RSS simultaneously in living cells under external stimulation, as well as displays indiscernible crosstalk between SERS and FL signals, which is very beneficial for the comprehension of physiological issues related with RSS.

Superior Reactivity of Molybdenum-Sulfur Cluster Anions Mo5S2- and Mo5S3- toward Dinitrogen

Inspired by the fact that Mo is a key element in biological nitrogenase, a series of gas-phase MoxSy- cluster anions are prepared and their reactivity toward N2 is investigated by the combination of mass spectrometry, photoelectron imaging spectroscopy, and density functional theory calculations. The Mo5S2- and Mo5S3- cluster anions show remarkable reactivity compared with the anionic species reported previously. The spectroscopic results in conjunction with theoretical analysis reveal that a facile cleavage of N≡N bonds takes place on Mo5S2- and Mo5S3-. The large dissociative adsorption energy of N2 and the favorable entrance channel for initial N2 approaching are proposed as two decisive factors for the superior reactivity of Mo5S2- and Mo5S3-. Besides, the modulation of S ligands on the reactivity of metal centers with N2 is proposed. The highly reactive metal-sulfur species may be obtained by the coordination of two to three sulfur atoms to bare metal clusters so that an appropriate combination of electronic structures and charge distributions can be achieved.

Order-order assembly transition-driven polyamines detection based on iron-sulfur complexes

Innovative modes of response can greatly push forward chemical sensing processes and subsequently improve sensing performance. Classical chemical sensing modes seldom involve the transition of a delicate molecular assembly during the response. Here, we display a sensing mode for polyamine detection based on an order-order transition of iron-sulfur complexes upon their assembly. Strong validation proves that the unique order-order transition of the assemblies is the driving force of the response, in which the polyamine captures the metal ion of the iron-sulfur complex, leading it to decompose into a metal-polyamine product, accompanied by an order-order transition of the assemblies. This mechanism makes the detection process more intuitive and selective, and remarkably improves the detection efficiency, achieving excellent polyamines specificity, second-level response, convenient visual detection, and good recyclability of the sensing system. Furthermore, this paper also provides opportunities for the further application of the iron-sulfur platform in environment-related fields.

Isostructural bridging diferrous chalcogenide cores [FeII(μ-E)FeII] (E = O, S, Se, Te) with decreasing antiferromagnetic coupling down the chalcogenide series

Iron compounds containing a bridging oxo or sulfido moiety are ubiquitous in biological systems, but substitution with the heavier chalcogenides selenium and tellurium, however, is much rarer, with only a few examples reported to date. Here we show that treatment of the ferrous starting material [(^tBupyrpyrr₂)Fe(OEt₂)] (1-OEt₂) (^tBupyrpyrr₂ = 3,5-^tBu₂-bis(pyrrolyl)pyridine) with phosphine chalcogenide reagents E = PR₃ results in the neutral phosphine chalcogenide adduct series [(^tBupyrpyrr₂)Fe(EPR₃)] (E = O, S, Se; R = Ph; E = Te; R = ^tBu) (1-E) without any electron transfer, whereas treatment of the anionic starting material [K]₂[(^tBupyrpyrr₂)Fe₂(μ-N₂)] (2-N₂) with the appropriate chalcogenide transfer source yields cleanly the isostructural ferrous bridging mono-chalcogenide ate complexes [K]₂[(^tBupyrpyrr₂)Fe₂(μ-E)] (2-E) (E = O, S, Se, and Te) having significant deviation in the Fe-E-Fe bridge from linear in the case of E = O to more acute for the heaviest chalcogenide. All bridging chalcogenide complexes were analyzed using a variety of spectroscopic techniques, including ¹H NMR, UV-Vis electronic absorbtion, and ⁵⁷Fe Mössbauer. The spin-state and degree of communication between the two ferrous ions were probed via SQUID magnetometry, where it was found that all iron centers were high-spin (S = 2) Fe^II, with magnetic exchange coupling between the Fe^II ions. Magnetic studies established that antiferromagnetic coupling between the ferrous ions decreases as the identity of the chalcogen is tuned from O to the heaviest congener Te.

Cubane-type tungsten-iron-sulfur clusters with a nitrogen atom in the core: terminal ligand substitutions and redox behaviors

The lack of M-Fe-S (M = Mo or W) clusters incorporating a second period (2p) atom in the core has resulted in limited investigations and poor understanding of the physical and chemical properties of the M-Fe-S clusters closely related to the FeMo cofactor. In this work, systematic studies have been carried out to explore the chemical reactivities at the terminal ligand sites and the redox properties of a series of clusters comprising a [WFe₃S₃N] cubane core, based on the previously developed cluster [(Tp*)WFe₃S₃(μ₃-NSiMe₃)Cl₃]^1-. Substitutions of the terminal chlorides with ethanethiolate, methanethiolate, thiophenolate, p-thiocresolate and azide occurred smoothly, while the replacement of the chlorides with carbene ligands required the reduction of the precursor into [(Tp*)WFe₃S₃(μ₃-NSiMe₃)Cl₃]^2- first. The reduced cluster core could also be supported by thiophenolates as terminal ligands, but not thiolates or azides. It is remarkable that the thiophenolate ligated reduced cluster can be synthesized from the precursor [(Tp*)WFe₃S₃(μ₃-NSiMe₃)Cl₃]^1-via different synthetic routes, either reduction followed by substitution or substitution followed by reduction, either in situ or stepwise. This work indicates that terminal ligands contribute significantly to determine the chemical and physical properties of the clusters, even though they might affect the cluster core to a limited extent from a structural point of view, which raises the possibility of delicate control in regulating the physical/chemical properties of M-Fe-S clusters with a heteroleptic core incorporating 2p atom(s).

Interfacial engineering of hydrophobic octadecanethiol/Pd metallene toward electrocatalytic nitrogen reduction

In this work, we propose the modification of ultrathin and wrinkled Pd metallene by hydrophobic octadecanethiol (Pdene@C18) via Pd-S bonds for the nitrogen reduction reaction. The hydrophobic self-assembled monolayer C18 can effectively capture more N₂ and inhibit the hydrogen evolution reaction. As a result, a high NH₃ yield and Faraday efficiency of 27.97 μg h^-1 mg_cat.^-1 and 14.29% are achieved for Pdene@C18 under neutral conditions, respectively, highlighting the modification of hydrophobic monolayers for efficient nitrogen electro-reduction to ammonia.

A metal-free catalyst for electrocatalytic NO reduction to NH3

Metal-free boron phosphide (BP) is explored for the first time as an effective catalyst for electrocatalytic NO reduction to NH₃, showing a high NH₃-faradaic efficiency of 83.3% with an NH₃ yield rate of 96.6 μmol h^-1 cm^-2, surpassing most metal-based catalysts. Theoretical results reveal that the B and P atoms of BP can serve as dual-active centers to synergistically activate NO, promote the NORR hydrogenation process and inhibit the competing hydrogen evolution reaction.

Syntheses, Characterizations, Crystal Structures, and Protonation Reactions of Dinitrogen Chromium Complexes Supported with Triamidoamine Ligands

A novel dinitrogen-dichromium complex, [{Cr(L^Bn)}₂(μ-N₂)] (1), has been prepared from reaction of CrCl₃ with a lithiated triamidoamine ligand (Li₃L^Bn) under dinitrogen. The X-ray crystal structure analysis of 1 revealed that it is composed of two independent dimeric Cr complexes bridged by N₂ in the unit cell. The bridged N-N bond lengths (1.188(4) and 1.185(7) Å) were longer than the free dinitrogen molecule. The elongations of N-N bonds in 1 were also supported by the fact that the ν(N-N) stretching vibration at 1772 cm^-1 observed in toluene is smaller than the free N₂. Complex 1 was identified to be a 5-coordinated high spin Cr(IV) complex by Cr K-edge XANES measurement. The ¹H NMR spectrum and temperature dependent magnetic susceptibility of 1 indicated that complex 1 is in the S = 1 ground state, in which two Cr(IV) ions and unpaired electron spins of the bridging N₂^2- ligand are strongly antiferromagnetically coupled. Reaction of complex 1 with 2.3 equiv of Na or K gave chromium complexes with N₂ between the Cr ion and the respective alkali metal ion, [{CrNa(L^Bn)(N₂)(Et₂O)}₂] (2) and [{CrK(L^Bn)(N₂)}₄(Et₂O)₂] (3), respectively. Furthermore, the complexes 2 and 3 reacted with 15-crown-5 and 18-crown-6 to form the respective crown-ether adducts, [CrNa(L^Bn)(N₂)(15-crown-5)] (4) and [CrK(L^Bn)(N₂)(18-crown-6)] (5). The XANES measurements of complexes 2, 3, 4, and 5 revealed that they are high spin Cr(IV) complexes like complex 1. All complexes reacted with a reducing agent and a proton source to form NH₃ and/or N₂H₄. The yields of these products in the presence of K⁺ were higher than those in the presence of Na⁺. The electronic structures and binding properties of 1, 2, 3, 4, and 5 were evaluated and discussed based on their DFT calculations.

Tandem Electrocatalytic Nitrate Reduction to Ammonia on MBenes

We demonstrate the great feasibility of MBenes as a new class of tandem catalysts for electrocatalytic nitrate reduction to ammonia (NO₃ RR). As a proof of concept, FeB₂ is first employed as a model MBene catalyst for the NO₃ RR, showing a maximum NH₃ -Faradaic efficiency of 96.8 % with a corresponding NH₃ yield of 25.5 mg h^-1  cm^-2 at -0.6 V vs. RHE. Mechanistic studies reveal that the exceptional NO₃ RR activity of FeB₂ arises from the tandem catalysis mechanism, that is, B sites activate NO₃ ^- to form intermediates, while Fe sites dissociate H₂ O and increase *H supply on B sites to promote the intermediate hydrogenation and enhance the NO₃ ^- -to-NH₃ conversion.

Defect engineering of two-dimensional materials for advanced energy conversion and storage

In the global trend towards carbon neutrality, sustainable energy conversion and storage technologies are of vital significance to tackle the energy crisis and climate change. However, traditional electrode materials gradually reach their property limits. Two-dimensional (2D) materials featuring large aspect ratios and tunable surface properties exhibit tremendous potential for improving the performance of energy conversion and storage devices. To rationally control the physical and chemical properties for specific applications, defect engineering of 2D materials has been investigated extensively, and is becoming a versatile strategy to promote the electrode reaction kinetics. Simultaneously, exploring the in-depth mechanisms underlying defect action in electrode reactions is crucial to provide profound insight into structure tailoring and property optimization. In this review, we highlight the cutting-edge advances in defect engineering in 2D materials as well as their considerable effects in energy-related applications. Moreover, the confronting challenges and promising directions are discussed for the development of advanced energy conversion and storage systems.

Synthesis of a Fe3-Carbyne Motif by Oxidation of an Alkyl Ligated Iron-Sulfur (WFe3S3) Cluster

The presence of a carbide ligand in the active site of nitrogenases remains an unusual example of organometallic chemistry employed by a protein. Carbide incorporation into the MFe7S9C cluster involves complex biosynthesis, but analogous synthetic methodologies are limited. Herein, we present a new synthetic strategy for incorporating carbon based bridging ligands into iron-sulfur clusters. Starting from a halide precursor, a WFe3S3 cluster displaying three terminal alkyl ligands and an open Fe3 face was prepared. Oxidation results in loss of alkane and formation of a μ3-carbyne. Characterization of these clusters and mechanistic studies are presented.

Sub-nm RuOx Clusters on Pd Metallene for Synergistically Enhanced Nitrate Electroreduction to Ammonia

The electrochemical nitrate reduction to ammonia reaction (NO3RR) has emerged as an appealing route for achieving both wastewater treatment and ammonia production. Herein, sub-nm RuOx clusters anchored on a Pd metallene (RuOx/Pd) are reported as a highly effective NO3RR catalyst, delivering a maximum NH3-Faradaic efficiency of 98.6% with a corresponding NH3 yield rate of 23.5 mg h-1 cm-2 and partial a current density of 296.3 mA cm-2 at -0.5 V vs RHE. Operando spectroscopic characterizations combined with theoretical computations unveil the synergy of RuOx and Pd to enhance the NO3RR energetics through a mechanism of hydrogen spillover and hydrogen-bond interactions. In detail, RuOx activates NO3- to form intermediates, while Pd dissociates H2O to generate *H, which spontaneously migrates to the RuOx/Pd interface via a hydrogen spillover process. Further hydrogen-bond interactions between spillovered *H and intermediates makes spillovered *H desorb from the RuOx/Pd interface and participate in the intermediate hydrogenation, contributing to the enhanced activity of RuOx/Pd for NO3--to-NH3 conversion.

Sulphur retention and in-situ preparation of metal sulphide catalysts during activation of petroleum coke

Petroleum coke (petcoke) containing sulphur has limited direct applications, but stockpiling the material creates an environmental issue. Although chemical activation can be used to valorise the petcoke to activated carbon, sulphur is released creating alternative environmental problems. In this study, a new activation method for high sulphur content (∼6.5 wt%) petcoke was developed to retain sulphur and prepare transition metal sulphide catalysts simultaneously. Petcoke was mixed with tungsten and nickel precursors and then activated by KOH at 600 °C in the presence of steam. After washing, the activated petcoke had a sulphur content of 5.1 wt%, which was much higher than that in the absence of steam during activation (0.4 wt%). Sulphur was also retained (>4 wt% of sulphur) when other transition metals including molybdenum and cobalt were used. Characterization by XRD, XPS, and SEM-EDS suggested that sulphur was retained on the activated petcoke in the form of metal sulphides. Further thermodynamic analysis of the system revealed that in the presence of steam an H₂S/H₂ mixture was generated, and this mixture promoted the formation of the metal sulphide species when metal precursors were introduced. The prepared metal sulphide catalysts were active for several reactions including the photoreduction of CO₂. Overall, this study provided an effective method to prepare metal sulphide catalysts from sulphur containing carbonaceous waste.

Catalytic nitrogen fixation using visible light energy

The synthesis of ammonia from atmospheric dinitrogen, nitrogen fixation, is one of the essential reactions for human beings. Because the current industrial nitrogen fixation depends on dihydrogen produced from fossil fuels as raw material, the development of a nitrogen fixation reaction that relies on the energy provided by renewable energy, such as visible light, is an important research goal from the viewpoint of sustainable chemistry. Herein, we establish an iridium- and molybdenum-catalysed process for synthesizing ammonia from dinitrogen under ambient reaction conditions and visible light irradiation. In this reaction system, iridium complexes and molybdenum triiodide complexes bearing N-heterocyclic carbene-based pincer ligands act as cooperative catalysts to activate 9,10-dihydroacridine and dinitrogen, respectively. The reaction of dinitrogen with 9,10-dihydroacridine is not thermodynamically favoured, and it only takes place under visible light irradiation. Therefore, the described reaction system is one that affords visible light energy-driven ammonia formation from dinitrogen catalytically.

Incorporation of an Asymmetric Mo-Fe-S Cluster as an Artificial Cofactor into Nitrogenase

Nitrogenase employs a sophisticated electron transfer system and a Mo-Fe-S-C cofactor, designated the M-cluster [(cit)MoFe7 S9 C]), to reduce atmospheric N2 to bioaccessible NH3 . Previously, we have shown that the cofactor-free form of nitrogenase can be repurposed as a protein scaffold for the incorporation of a synthetic Fe-S cluster [Fe6 S9 (SEt)2 ]4- . Here, we demonstrate the utility of an asymmetric Mo-Fe-S cluster [Cp*MoFe5 S9 (SH)]3- as an alternative artificial cofactor upon incorporation into the cofactor-free nitrogenase scaffold. The resultant semi-artificial enzyme catalytically reduces C2 H2 to C2 H4 , and CN- into short-chain hydrocarbons, yet it is clearly distinct in activity from its [Fe6 S9 (SEt)2 ]4- -reconstituted counterpart, pointing to the possibility to employ molecular design and cluster synthesis strategies to further develop semi-artificial or artificial systems with desired catalytic activities.

Metal-Metal Bond Umpolung in Heterometallic Extended Metal Atom Chains

Understanding the fundamental properties governing metal–metal interactions is crucial to understanding the electronic structure and thereby applications of multimetallic systems in catalysis, material science, and magnetism. One such property that is relatively underexplored within multimetallic systems is metal–metal bond polarity, parameterized by the electronegativities (χ) of the metal atoms involved in the bond. In heterobimetallic systems, metal–metal bond polarity is a function of the donor–acceptor (Δχ) interactions of the two bonded metal atoms, with electropositive early transition metals acting as electron acceptors and electronegative late transition metals acting as electron donors. We show in this work, through the preparation and systematic study of a series of Mo₂M(dpa)₄(OTf)₂ (M = Cr, Mn, Fe, Co, and Ni; dpa = 2,2′-dipyridylamide; OTf = trifluoromethanesulfonate) heterometallic extended metal atom chain (HEMAC) complexes that this expected trend in χ can be reversed. Physical characterization via single-crystal X-ray diffraction, magnetometry, and spectroscopic methods as well as electronic structure calculations supports the presence of a σ symmetry 3c/3e^– bond that is delocalized across the entire metal-atom chain and forms the basis of the heterometallic Mo₂–M interaction. The delocalized 3c/3e^– interaction is discussed within the context of the analogous 3c/3e^– π bonding in the vinoxy radical, CH₂CHO. The vinoxy comparison establishes three predictions for the σ symmetry 3c/3e^– bond in HEMACS: (1) an umpolung effect that causes the Mo–M interactions to become more covalent as Δχ increases, (2) distortion of the σ bonding and non-bonding orbitals to emphasize Mo–M bonding and de-emphasize Mo–Mo bonding, and (3) an increase in Mo spin population with increasing Mo–M covalency. In agreement with these predictions, we find that the Mo₂···M covalency increases with increasing Δχ of the Mo and M atoms (Δχ_Mo–M increases as M = Cr < Mn < Fe < Co < Ni), an umpolung of the trend predicted in the absence of σ delocalization. We attribute the observed trend in covalency to the decreased energic differential (ΔE) between the heterometal orbital and the σ bonding molecular orbital of the Mo₂ quadruple bond, which serves as an energetically stable, “ligand”-like electron-pair donor to the heterometal ion acceptor. As M is changed from Cr to Ni, the σ bonding and nonbonding orbitals do indeed distort as anticipated, and the spin population of the outer Mo group is increased by at least a factor of 2. These findings provide a predictive framework for multimetallic compounds and advance the current understanding of the electronic structures of molecular heteromultimetallic systems, which can be extrapolated to applications in the context of mixed-metal surface catalysis and multimetallic proteins.

This work describes how use of a metal−metal quadruply bonded metalloligand can reverse expected trends in metal−metal bond polarity through the preparation and systematic study of a novel series of Mo₂M(dpa)₄(OTf)₂ (M = Cr, Mn, Fe, Co, and Ni) heterotrimetallic extended metal atom chain (HEMAC) complexes. These complexes feature a 3c/3e⁻ metal−metal bond that is delocalized across the entire metal atom chain and is compared to the 3c/3e⁻ π bonding in the vinoxyl radical.

Second and Outer Coordination Sphere Effects in Nitrogenase, Hydrogenase, Formate Dehydrogenase, and CO Dehydrogenase

Gases like H₂, N₂, CO₂, and CO are increasingly recognized as critical feedstock in "green" energy conversion and as sources of nitrogen and carbon for the agricultural and chemical sectors. However, the industrial transformation of N₂, CO₂, and CO and the production of H₂ require significant energy input, which renders processes like steam reforming and the Haber-Bosch reaction economically and environmentally unviable. Nature, on the other hand, performs similar tasks efficiently at ambient temperature and pressure, exploiting gas-processing metalloenzymes (GPMs) that bind low-valent metal cofactors based on iron, nickel, molybdenum, tungsten, and sulfur. Such systems are studied to understand the biocatalytic principles of gas conversion including N₂ fixation by nitrogenase and H₂ production by hydrogenase as well as CO₂ and CO conversion by formate dehydrogenase, carbon monoxide dehydrogenase, and nitrogenase. In this review, we emphasize the importance of the cofactor/protein interface, discussing how second and outer coordination sphere effects determine, modulate, and optimize the catalytic activity of GPMs. These may comprise ionic interactions in the second coordination sphere that shape the electron density distribution across the cofactor, hydrogen bonding changes, and allosteric effects. In the outer coordination sphere, proton transfer and electron transfer are discussed, alongside the role of hydrophobic substrate channels and protein structural changes. Combining the information gained from structural biology, enzyme kinetics, and various spectroscopic techniques, we aim toward a comprehensive understanding of catalysis beyond the first coordination sphere.

PdFe Single-Atom Alloy Metallene for N2 Electroreduction

Single-atom alloys hold great promise for electrocatalytic nitrogen reduction reaction (NRR), while the comprehensive experimental/theoretical investigations of SAAs for the NRR are still missing. Herein, PdFe₁ single-atom alloy metallene, in which the Fe single atoms are confined on a Pd metallene support, is first developed as an effective and robust NRR electrocatalyst, delivering exceptional NRR performance with an NH₃ yield of 111.9 μg h^-1  mg^-1 , a Faradaic efficiency of 37.8 % at -0.2 V (RHE), as well as a long-term stability for 100 h electrolysis. In-depth mechanistic investigations by theoretical computations and operando X-ray absorption/Raman spectroscopy indentify Pd-coordinated Fe single atoms as active centers to enable efficient N₂ activation via N₂ -to-Fe σ-donation, reduced protonation energy barriers, suppressed hydrogen evolution and excellent thermodynamic stability, thus accounting for the high activity, selectivity and stability of PdFe₁ for the NRR.

Nitrogen reduction by the Fe sites of synthetic [Mo3S4Fe] cubes

Nitrogen (N₂) fixation by nature, which is a crucial process for the supply of bio-available forms of nitrogen, is performed by nitrogenase. This enzyme uses a unique transition-metal-sulfur-carbon cluster as its active-site co-factor ([(R-homocitrate)MoFe₇S₉C], FeMoco)^1,2, and the sulfur-surrounded iron (Fe) atoms have been postulated to capture and reduce N₂ (refs. ^3-6). Although there are a few examples of synthetic counterparts of the FeMoco, metal-sulfur cluster, which have shown binding of N₂ (refs. ^7-9), the reduction of N₂ by any synthetic metal-sulfur cluster or by the extracted form of FeMoco¹⁰ has remained elusive, despite nearly 50 years of research. Here we show that the Fe atoms in our synthetic [Mo₃S₄Fe] cubes^11,12 can capture a N₂ molecule and catalyse N₂ silylation to form N(SiMe₃)₃ under treatment with excess sodium and trimethylsilyl chloride. These results exemplify the catalytic silylation of N₂ by a synthetic metal-sulfur cluster and demonstrate the N₂-reduction capability of Fe atoms in a sulfur-rich environment, which is reminiscent of the ability of FeMoco to bind and activate N₂.

Catalytic Reduction of Dinitrogen into Ammonia and Hydrazine by Using Chromium Complexes Bearing PCP-Type Pincer Ligands

A series of chromium-halide, -nitride, and -dinitrogen complexes bearing carbene- and phosphine-based PCP-type pincer ligands has been newly prepared, and some of them are found to work as effective catalysts to reduce dinitrogen under atmospheric pressure, whereby up to 11.60 equiv. of ammonia and 2.52 equiv. of hydrazine (16.6 equiv. of fixed N atom) are produced based on the chromium atom. To the best of our knowledge, this is the first successful example of chromium-catalyzed conversion of dinitrogen to ammonia and hydrazine under mild reaction conditions.

Dehydrated UiO-66(SH)2 : The Zr-O Cluster and Its Photocatalytic Role Mimicking the Biological Nitrogen Fixation

This work reports the dehydrated Zr-based MOF UiO-66(SH)₂ as a visible-light-driven photocatalyst to mimic the biological N₂ fixation process. The ¹⁵ N₂ and other control experiments demonstrated that the new photocatalyst is highly efficient in converting N₂ to ammonia. In-situ TGA, XPS, and EXAFS as well as first-principles simulations were used to demonstrate the role of the thermal treatment and the changes of the local structures around Zr due to the dehydration. It was shown that the dehydration opened a gate for the entry of N₂ molecules into the [Zr₆ O₆ ] cluster where the strong N≡N bond was broken stepwise by μ-N-Zr type interactions driven by the photoelectrons aided by the protonation. This mechanism was discussed in comparison with the Lowe-Thorneley mechanism proposed for the MoFe nitrogenase, and with emphasis on the [Zr₆ O₆ ] cluster effect and the leading role of photoelectrons over the protonation. The results shed new light on understanding the catalytic mechanism of biological N₂ fixation and open a new way to fix N₂ under mild conditions.

Shearing Sulfur Edges of VS2 Electrocatalyst Enhances its Nitrogen Reduction Performance

Electrochemical N₂ fixation requires effective electrocatalysts to expedite the nitrogen reduction reaction (NRR) kinetics and suppress the concomitant hydrogen evolution reaction (HER). Although transition metal sulfides have been deemed as efficient NRR electrocatalysts, it remains a great challenge to suppress the serious HER to achieve high Faradaic efficiency (FE). Herein, vanadium disulfide (VS₂ ) is deliberately designed by partially shearing its sulfur (S) edges through a simple calcination treatment at 350 °C. The as-prepared VS₂ -350 electrocatalyst exhibits a highest NH₃ yield of 20.29 µg h^-1 mg_cat^-1 with a promising FE of 3.86%, which is significantly higher than the counterpart of untreated VS₂ (V_NH3 : 15.92 µg h^-1 mg_cat^-1 , FE: 1.69%). Experimental and computational results reveal that shearing the S edges can substantially inhibit the HER and expose more V atoms as active sites. Meanwhile, the mechanistic analysis shows that the N₂ activation at V active sites follows an "acceptance-donation" mechanism, while the N₂ conversion to NH₃ follows a hybrid 2 pathway at the VS₂ -350 electrocatalyst. This work provides a simple strategy of designing high-performance NRR electrocatalysts based on a deep understanding of the atomic sites dependent catalytical activity.

Stepwise Construction of Mo-Fe-S Clusters Using a LEGO Strategy

The rational synthesis of iron-sulfur clusters with excellent control of the core ligands has been a significant challenge in biomimetic chemistry. In this work, the rational construction of versatile Mo-Fe-S cubane clusters was realized using a LEGO strategy. (LEGO is a line of plastic construction toys consisting of various interlocking plastic bricks which can be assembled and connected in different ways to construct versatile objects. Herein we use "LEGO strategy" as an analogy for the stepwise synthetic methodology, and we use "brick" to represent a corner atom of the cubane structure.) Through careful synthetic control, the ⟨Fe⟩, ⟨S⟩, and ⟨Cl⟩ bricks were mounted piece-by-piece onto the basic ⟨MoS₃⟩ frame to stepwise construct the incomplete cubane core ⟨MoFe₂S₃Cl⟩ and the complete cubane core ⟨MoFe₃S₃Cl⟩. The significantly elongated Fe-Cl bonds for the bridging chlorides in the ⟨MoFe₂S₃Cl⟩ and ⟨MoFe₃S₃Cl⟩ cores permit ligand metatheses to introduce 2p donors at the bridging sites, which used to be a challenge in traditional iron-sulfur chemistry. Therefore, in subsequent controlled reactions, the bridging ⟨Cl⟩ bricks of the ⟨MoFe₂S₃Cl⟩ and ⟨MoFe₃S₃Cl⟩ frames could be easily replaced by ⟨N⟩ , ⟨O⟩, or ⟨S⟩ bricks to generate the ⟨MoFe₂S₃N⟩, ⟨MoFe₂S₃O⟩, ⟨MoFe₃S₃N⟩, and ⟨MoFe₃S₄⟩ cluster cores, demonstrating more choices for the LEGO synthetic strategy. The series of Mo-Fe-S clusters and their derivatives, together with related synthetic strategies, offers a good platform and methodology for biomimetic chemistry in relation to nitrogenase, especially the FeMo cofactor.

Iron Complexes of a Proton-Responsive SCS Pincer Ligand with a Sensitive Electronic Structure

Sulfur/carbon/sulfur pincer ligands have an interesting combination of strong-field and weak-field donors, a coordination environment that is also present in the nitrogenase active site. Here, we explore the electronic structures of iron(II) and iron(III) complexes with such a pincer ligand, bearing a monodentate phosphine, thiolate S donor, amide N donor, ammonia, or CO. The ligand scaffold features a proton-responsive thioamide site, and the protonation state of the ligand greatly influences the reduction potential of iron in the phosphine complex. The N-H bond dissociation free energy, derived from the Bordwell equation, is 56 ± 2 kcal/mol. Electron paramagnetic resonance (EPR) spectroscopy and superconducting quantum interference device (SQUID) magnetometry measurements show that the iron(III) complexes with S and N as the fourth donors have an intermediate spin (S = 3/2) ground state with a large zero field splitting, and X-ray absorption spectra show a high Fe-S covalency. The Mössbauer spectrum changes drastically with the position of a nearby alkali metal cation in the iron(III) amido complex, and density functional theory calculations explain this phenomenon through a change between having the doubly occupied orbital as dz2 or dyz, as the former is more influenced by the nearby positive charge.