Locally Enhanced Electric Field Treatment (LEEFT) Promotes the Performance of Ozonation for Bacteria Inactivation by Disrupting the Cell Membrane

Nanowire-assisted electroporation via inducing cell destruction for inhibiting formation of VBNC bacteria: Comparison with chlorination

The induction of viable but nonculturable (VBNC) bacteria with cellular integrity and low metabolic activity by chemical disinfection causes a significant underestimation of potential microbiological risks in drinking water. Herein, a physical Co3O4 nanowire-assisted electroporation (NW-EP) was developed to induce cell damage via the locally enhanced electric field over nanowire tips, potentially achieving effective inhibition of VBNC cells as compared with chemical chlorination (Cl2). NW-EP enabled over 5-log removal of culturable cell for various G+/G- bacteria under voltage of 1.0 V and hydraulic retention time of 180 s, and with ∼3-6 times lower energy consumption than Cl2. NW-EP also achieved much higher removals (∼84.6 % and 89.5 %) of viable Bacillus cereus (G+) and Acinetobacter schindleri (G-) via generating unrecoverable pores on cell wall and reversible/irreversible pores on cell membrane than Cl2 (∼28.6 % and 41.1 %) with insignificant cell damage. The residual VBNC bacteria with cell wall damage and membrane pore resealing exhibited gradual inactivation by osmotic stress, leading to ∼99.8 % cell inactivation after 24 h storage (∼59.4 % for Cl2). Characterizations of cell membrane integrity and cell morphology revealed that osmotic stress promoted cell membrane damage for the gradual inactivation of VBNC cells during storage. The excellent adaptability of NW-EP for controlling VBNC cells in DI, tap and lake waters suggested its promising application potentials for drinking water, such as design of an external device on household taps.

MnO2-based capacitive system enhances ozone inactivation of bacteria by disrupting cell membrane

The application of ozone (O3) disinfection has been hindered by its low solubility in water and the formation of disinfection by-products (DBPs). In this study, capacitive disinfection is applied as a pre-treatment for O3 oxidation, in which manganese dioxide with a rambutan-like hollow spherical structure is used as the electrode to increase the charge density on the electrode surface. When a voltage is applied, the negative-charged microbes are attracted to the electrodes and killed by electrical interactions. The contact between microbes and capacitive electrodes leads to changes in cell permeability and burst of reactive oxygen species, thereby promoting the diffusion of O3 into the cells. After O3 penetrates the cell membrane, it can directly attack the cytoplasmic constituents, accelerating fatal and irreversible damage to pathogens. As a result, the performance of the capacitance-O3 process is proved better than the direct sum of the two individual process efficiencies. The design of capacitance-O3 system is beneficial to reduce the ozone dosage and DBPs with a broader inactivation spectrum, which is conducive to the application of ozone in primary water disinfection.

Dielectric barrier discharge plasma promotes disinfection-residual-bacteria inactivation via electric field and reactive species

Traditional disinfection processes face significant challenges such as health and ecological risks associated with disinfection-residual-bacteria due to their single mechanism of action. Development of new disinfection processes with composite mechanisms is therefore urgently needed. In this study, we employed liquid ground-electrode dielectric barrier discharge (lgDBD) to achieve synergistic sterilization through electric field electroporation and reactive species oxidation. At a voltage of 12 kV, Pseudomonas fluorescens (ultraviolet and ozone-resistant) and Bacillus subtilis (chlorine-resistant) were completely inactivated within 8 and 6 min, respectively, surpassing a 7.0-log reduction. The lgDBD process showed good disinfection performance across a wide range of pH values and different practical water samples. Staining experiments suggest that cellular membrane damage contributes to this inactivation. In addition, we used a two-dimensional parallel streamer solver with kinetics code to fashion a representative model of the basic discharge unit, and discovered the presence of a persistent electric field during the discharge process with a peak value of 2.86 × 106 V/m. Plasma discharge generates excited state species such as O(1D) and N2(C3Πu), and further forms reactive oxygen and nitrogen species at the gas-liquid interface. The physical process, which is driven by electric field-induced cell membrane electroporation, synergizes with the bactericidal effects of reactive oxygen and nitrogen species to provide effective disinfection. Adopting the lgDBD process enhances sterilization efficiency and adaptability, underscoring its potential to revolutionize physicochemical synergistic disinfection practices.

Spin-state Conversion by Asymmetrical Orbital Hybridization in Ni-doped Co3 O4 to Boost Singlet Oxygen Generation for Microbial Disinfection

Singlet oxygen (1 O2 ) plays a significant role in environmental and biomedical disinfection fields. Electrocatalytic processes hold great potential for 1 O2 generation, but remain challenging. Herein, a facile Ni doping converted spin-state transition approach is reported for boosting 1 O2 production. Magnetic analysis and theoretical calculations reveal that Ni occupied at the octahedral site of Co3 O4 can effectively induce a low-to-high spin-state transition. The high-spin Ni-Co3 O4 generate appropriate binding strength and enhance electron transfer between the Co centers with oxygen intermediates, thereby improving the catalytic activity of Ni-Co3 O4 for effective generating 1 O2 . In neutral conditions, 1×106  CFU mL-1 Gram-negative ESBL-producing Escherichia coli (E. coli) could be inactivated by Ni-Co3 O4 system within 5 min. Further antibacterial mechanisms indicate that 1 O2 can lead to cell membrane damage and DNA degradation so as to irreversible cell death. Additionally, the developed Ni-Co3 O4 system can effectively inactivate bacteria from wastewater and bioaerosols. This work provides an effective strategy for designing high-spin electrocatalysis to boost 1 O2 generation for disinfection process.

Advances on electrochemical disinfection research: Mechanisms, influencing factors and applications

Disinfection, a vital barrier against pathogenic microorganisms, is crucial in halting the spread of waterborne diseases. Electrochemical methods have been extensively researched and implemented for the inactivation of pathogenic microorganisms from water and wastewater, primarily owing to their simplicity, efficiency, and eco-friendliness. This review succinctly outlined the core mechanisms of electrochemical disinfection (ED) and systematically examined the factors influencing its efficacy, including anode materials, system conditions, and target species. Additionally, the practical application of ED in water and wastewater treatment was comprehensively reviewed. Case studies involving various scenarios such as drinking water, hospital wastewater, black water, rainwater, and ballast water provided concrete instances of the expansive utility of ED. Finally, coupling ED with other technologies and the resulting synergies were introduced as pivotal foundations for subsequent engineering advancements.

Operando investigation of the synergistic effect of electric field treatment and copper for bacteria inactivation

As the overuse of chemicals in our disinfection processes becomes an ever-growing concern, alternative approaches to reduce and replace the usage of chemicals is warranted. Electric field treatment has shown promising potential to have synergistic effects with standard chemical-based methods as they both target the cell membrane specifically. In this study, we use a lab-on-a-chip device to understand, observe, and quantify the synergistic effect between electric field treatment and copper inactivation. Observations in situ, and at a single cell level, ensure us that the combined approach has an enhancement effect leading more bacteria to be weakened by electric field treatment and susceptible to inactivation by copper ion permeation. The synergistic effects of electric field treatment and copper can be visually concluded here, enabling the further study of this technology to optimally develop, mature, and scale for its various applications in the future.

Operando investigation of particle re-entrainment mechanism in electrostatic capture process on the lab-on-a-chip

Inhalable particle is a harmful air pollutant that causes a significant threat to people's health and ecological environments, which should be removed to purify air, but there exists limited removal efficiency due to particle re-entrainment. Here, Operando observation system based on microscopic visualization method is developed to make in situ test of particle migration, deposition and re-entrainment characteristics on a lab-on-a-chip to achieve the investigation in micro-level scale. The deposition evolution of charged particles is recorded in electric field region intuitively, which confirms the fracture of particle chain occurs during the growth process of deposited particles. It captures the instantaneous process that a larger particle with micron size due to the coagulation of submicron particles fractures from main body of the particle chain for the first time. The analysis of migration behavior of a single submicron particle near electrode surface demonstrates the direct influence of drag force on the fracture of particle chain. This work is the first-time visualization of dynamic process and mechanism elucidation of particle re-entrainment at the micron level, and the findings will provide the theory support for the particle re-entrainment mechanism and bring inspires of enhancing capture efficiency of inhalable particle.

Identification of significant live bacterial community shifts in different reclaimed waters during ozone and chlorine disinfection

Ozone and chlorine are the most widely used disinfectants for water and wastewater disinfection. They play important role in microbial inactivation but could also pose a considerable selection effect on the microbial community of reclaimed water. Classical culture-based methods that rely on the assessment of conventional bacterial indicators (e.g., coliform bacteria) could hardly reflect the survival of disinfection residual bacteria (DRB) and hidden microbial risks in disinfected effluents. Hence, this study investigated the shifts of live bacterial community during ozone and chlorine disinfection in three reclaimed waters (i.e., two secondary effluents and one tertiary effluent), adopting Illumina Miseq sequencing technology in combination with a viability assay, propidium monoazide (PMA) pretreatment. Notably, statistical analyses of Wilcoxon rank-sum test confirmed the existance of distinct differences in bacterial community structure between samples with or without PMA pretreatment. On the phylum level, Proteobacteria commonly dominated in three undisinfected reclaimed waters, while ozone and chlorine disinfection posed varied effects on its relative abundance among different influents. On the genus level, ozone and chlorine disinfection significantly changed the bacterial composition and dominant species in reclaimed waters. Specifically, the typical DRB identified in ozone disinfected effluents were Pseudomonas, Nitrospira and Dechloromonas, while for chlorine disinfected effluents, Pseudomonas, Legionella, Clostridium, Mycobacterium and Romboutsia were recognized as typical DRB, which call for much attention. The Alpha and Beta diversity analysis results also suggested that different influent compositions greatly affected the bacterial community structure during disinfection processes. Since the experiments in present study were conducted in a short period and the dataset was relatively limited, prolonged experiment under different operational conditions are needed in future to illustrate the potential long-term effects of disinfection on the microbial community structure. The findings of this study could provide insights into microbial safety concern and control after disinfection for sustainable water reclamation and reuse.

Nitrogen removal performance of aerobic denitrifying bacteria enhanced by an iron-anode pulsed electric field

Pulsed electric field (PEF) technology has attracted considerable attention because it can efficiently treat pollutants that are difficult to degrade. In this study, a PEF system using iron as the electrode was constructed to investigate the effect of PEF-Fe on the growth and metabolism of aerobic denitrifying bacteria and the effectiveness of wastewater nitrogen removal. The chemical oxygen demand, NO3--N and nitrate removal rates were 98.93%, 97.60% and 24.40 mg·L-1·h-1, respectively, under optimal conditions. As confirmed in this study, PEF-Fe could improve the key enzyme activities of W207-14. Scanning electron microscopy revealed that the surface of PEF-Fe-treated W207-14 was intact and smooth without any irreversible deformation. Flow cytometry combined with fluorescence staining analysis also confirmed reversible electroporation on the cell membrane surface of PEF-Fe-treated W207-14. Differentially expressed gene enrichment analysis showed that PEF-Fe activated the transmembrane transport function of ATP-binding cassette transporte (ABC) transport proteins and enhanced the cell membrane permeability of aerobic denitrifying bacteria. The significant differential expression of iron-sulphur cluster proteins facilitated the regulation of electron transport and maintenance of the dynamic balance of iron ions within the PEF-Fe system.

Pulsed electric field promotes the growth metabolism of aerobic denitrifying bacteria Pseudomonas putida W207-14 by improving cell membrane permeability

The purpose of this study was to explore the stimulation mechanism of low pulsed electric field (PEF) strength treatment to promote the growth metabolism of aerobic denitrifying bacteria Pseudomonas putida W207-14. The results indicated that compared with the control group, the strain W207-14 treated with PEF entered the logarithmic growth phase 5 h earlier, the growth time to reached the maximum cell optical density at 600 nm (OD600) of 1.935 ± 0.04 was only 24 h, which shortened by half. With the reduction of growth time, the metabolic rate of the strain increased significantly, in which the removal efficiency of COD, NO₃^--N and TN was 97.67 ± 1.12%, 90.34 ± 0.73% and 90.13 ± 0.10% in 24 h, respectively. The maximum nitrate removal rate increased from 3.49 mg/L/h to 7.53 mg/L/h. A large number of cells with simultaneous cell membrane damage and high physiological activity were observed by flow cytometry (FCM) in combination with fluorescence staining analysis, which confirmed the reversible electroporation on the cell membrane of strain W207-14 treated with PEF. Transcriptomic analysis indicated that PEF activated the highly significant differential expression of membrane porin (opdB, opdC, and oprB) and cytochrome oxidoreductase related genes (ccoP, ccoN, cioA and cioB) on the cell membrane, which promoted the transport of nutrients through the cell membrane and electron transfer during aerobic respiration and provided an explanation for the possible mechanism of PEF promoting the growth metabolism of strain W207-14 at the micro level. These results lay a foundation for the practical application of PEF enhanced aerobic denitrification technology.

Self-Powered Disinfection Using Triboelectric, Conductive Wires of Metal-Organic Frameworks

Efficient water disinfection is vitally needed in rural and disaster-stricken areas lacking power supplies. However, conventional water disinfection methods strongly rely on external chemical input and reliable electricity. Herein, we present a self-powered water disinfection system using synergistic hydrogen peroxide (H₂O₂) assisted electroporation mechanisms driven by triboelectric nanogenerators (TENGs) that harvest electricity from the flow of water. The flow-driven TENG, assisted by power management systems, generates a controlled output with aimed voltages to drive a conductive metal-organic framework nanowire array for effective H₂O₂ generation and electroporation. The injured bacteria caused by electroporation can be further damaged by facile diffused H₂O₂ molecules at high throughput. A self-powered disinfection prototype enables complete disinfection (>99.9999% removal) over a wide range of flows up to 3.0 × 10⁴ L/(m² h) with low water flow thresholds (200 mL/min; ∼20 rpm). This rapid, self-powered water disinfection method is promising for pathogen control.

Application of electric field treatment (EFT) for microbial control in water and liquid food

Water disinfection and food pasteurization are critical to reducing waterborne and foodborne diseases, which have been a pressing public health issue globally. Electrified treatment processes are emerging and have become promising alternatives due to the low cost of electricity, independence of chemicals, and low potential to form by-products. Electric field treatment (EFT) is a physical pathogen inactivation approach, which damages cell membrane by irreversible electroporation. EFT has been studied for both water disinfection and food pasteurization. However, no study has systematically connected the two fields with an up-to-date review. In this article, we first provide a comprehensive background of microbial control in water and food, followed by the introduction of EFT. Subsequently, we summarize the recent EFT studies for pathogen inactivation from three aspects, the processing parameters, its efficacy against different pathogens, and the impact of liquid properties on the inactivation performance. We also review the development of novel configurations and materials for EFT devices to address the current challenges of EFT. This review introduces EFT from an engineering perspective and may serve as a bridge to connect the field of environmental engineering and food science.

Flow electrochemical inactivation of waterborne bacterial endospores

Waterborne pathogens have the risk of spreading waterborne diseases and even pandemics. Some Gram-positive bacteria can form endospores, the hardiest known life form that can withstand heat, radiation, and chemicals. Electrochemical inactivation may offer a promising solution, but is hindered by low inactivation efficiencies resulting from limitation of electrode/endospores interaction in terms of electrochemical reaction selectivity and mass transfer. Herein, these issues were addressed through modifying selectivity of active species formation using electroactive ceramic membrane with high oxygen evolution potential, improving mass transfer property by flow-through operation. In this way, inactivation (6.0-log) of Bacillus atrophaeus endospores was achieved. Theoretical and experimental results demonstrated synergistic inactivation to occur through fragmentation of coat via interfacial electron transfer and electro-produced transient radicals (•OH primarily, •Cl and Cl₂^•- secondarily), thereby increasing cell permeability to facilitate penetration of electro-produced persistent active chlorine for subsequent rupture of intracellular structures. Numbering-up electrode module strategy was proposed to scale up the system, achieving average 5.3-log inactivation of pathogenic Bacillus anthracis endospores for 30 days. This study demonstrates a proof-of-concept manner for effective inactivation of waterborne bacterial endospores, which may provide an appealing strategy for wide-range applications like water disinfection, bio-safety control and defense against biological warfare.

Lightning-Rod Effect on Nanowire Tips Reinforces Electroporation and Electrochemical Oxidation: An Efficient Strategy for Eliminating Intracellular Antibiotic Resistance Genes

Conventional oxidative disinfection methods are usually inefficient to eliminate intracellular antibiotic resistance genes (i-ARGs) due to competitive oxidation of cellular components of antibiotic-resistant bacteria (ARB), resulting in the ubiquitous occurrence of ARGs in drinking water systems. Herein, we developed the strategy of coupling electroporation and electrochemical oxidation on a Co₃O₄-nanowires-modified electrode to destroy the multiresistant Escherichia coli cells and promote subsequent i-ARG (bla_TEM-1 and aac(3)-II) degradation. The lightning-rod effect over nanowire tips can form finite regions with a locally enhanced electric field and highly concentrated charge density, in turn facilitating the electroporation for ARB cell damage and electrochemical reactivity for reactive chlorine/oxygen species generation. Characterization of the ARB membrane integrity and morphology revealed that electroporation-induced cell pores were further enlarged by the oxidation of reactive species, resulting in i-ARG removal at lower applied voltages and with 6-9 times lower energy consumption than the conventional electrochemical oxidation approach with a Co₃O₄-film-modified electrode. The satisfactory application and effective inhibition of horizontal gene transfer in tap water further demonstrated the great potential of our strategy in the control of the ARG dissemination risk in drinking water systems.

The drinking water disinfection performances and mechanisms of UVA-LEDs promoted by electrolysis

In this study, the UVA (Ultraviolet A) drinking water disinfection was promoted by electrolysis. The influences of the UVA, electrolysis current, bubbling and temperature were investigated. The disinfection mechanisms and bacterial reactivation had been studied. The results revealed that the treatment time needed to reach the DL (detection limit, about 5.4 log removal) was shortened from 180 to 80 min by the electrolysis. The total electricity consumption decreased from about 126-57.0 kJ/L. Compared with increasing the UVA irradiation, increasing the electrolysis current in a certain range was more preferred to improve the disinfection rate. Oxygen bubbling or higher temperature could enhance the E. coli inactivation. The quenching experiment and EPR (Electron paramagnetic resonance) detection confirmed that ROSs (¹O₂, ·O₂^- and ·OH) played important roles for the disinfection. Compared with the treatment with UVA alone, the cell membrane damage was more severe by the promoting method. In addition to the dramatically reduced enzyme activity, the synergistic process degraded most of the bacterial genomic DNA, and the bacteria were completely killed. Therefore, hybrid with electrolysis is a better way for the application of the UVA-LED disinfection.

Synergistic Nanowire-Enhanced Electroporation and Electrochlorination for Highly Efficient Water Disinfection

Conventional water disinfection methods such as chlorination typically involve the generation of harmful disinfection byproducts and intensive chemical consumption. Emerging electroporation disinfection techniques using nanowire-enhanced local electric fields inactivate microbes by damaging their outer structures without byproduct formation or chemical dosing. However, this physical-based method suffers from a limited inactivation efficiency under high water flux due to an insufficient contact time. Herein, we integrate electrochlorination with nanowire-enhanced electroporation to achieve a synergistic flow-through process for efficient water disinfection targeting bacteria and viruses. Electroporation at the cathode induces sub-lethal damages on the microbial outer structures. Subsequently, electrogenerated active chlorine at the anode aggravates these electroporation-induced injuries to the level of lethal damage. This sequential flow-through disinfection system achieves complete disinfection (>6.0-log) under a very high water flux of 2.4 × 10⁴ L/(m² h) with an applied voltage of 2.0 V. This disinfection efficiency is 8 times faster than that of electroporation alone. Further, the specific energy consumption for the disinfection by this novel process is extremely low (8 × 10^-4 kW h/m³). Our results demonstrate a promising method for rapid and energy-efficient water disinfection by coupling electroporation with electrochlorination to meet vital needs for pathogen elimination.

Mechanism and potential risk of antibiotic resistant bacteria carrying last resort antibiotic resistance genes under electrochemical treatment

The significant rise in the number of antibiotic resistance genes (ARGs) that resulted from our abuse of antibiotics could do severe harm to public health as well as to the environment. We investigated removal efficiency and removal mechanism of electrochemical (EC) treatment based on 6 different bacteria isolated from hospital wastewater carrying 3 last resort ARGs including NDM-1, mcr-1 and tetX respectively. We found that the removal efficiency of ARGs increased with the increase of both voltage and electrolysis time while the maximum removal efficiency can reach 90%. The optimal treatment voltage and treatment time were 3 V and 120 min, respectively. Temperature, pH and other factors had little influence on the EC treatment process. The mechanism of EC treatment was explored from the macroscopic and microscopic levels by scanning electron microscopy (SEM) and flow cytometry. Our results showed that EC treatment significantly changed the permeability of cell membrane and caused cells successively experience early cell apoptosis, late cell apoptosis and cell necrosis. Moreover, compared with traditional disinfection methods, EC treatment had less potential risks. The conjugative transfer frequencies of cells were significantly reduced after treatment. Less than 1% of bacteria entered the viable but nonculturable (VBNC) state and less than 5% of intracellular ARGs (iARGs) turned into extracellular ARGs (eARGs). Our findings provide new insights into as well as important reference for future electrochemical treatment in removing ARB from hospital wastewater.

Catalyst-Free Periodate Activation by Solar Irradiation for Bacterial Disinfection: Performance and Mechanisms

Periodate (PI)-based advanced oxidation process has recently attracted great attention in the water treatment processes. In this study, solar irradiation was used for PI activation to disinfect waterborne bacteria. The PI/solar irradiation system could inactivate Escherichia coli below the limit of detection (LOD, 10 CFU mL^-1) with initial concentrations of 1 × 10⁶, 1 × 10⁷, and 1 × 10⁸ CFU mL^-1 within 20, 40, and 100 min, respectively. ^•O₂^- and ^•OH radicals contributed to the bacterial disinfection. These reactive radicals could attack and penetrate the cell membrane, thereby increasing the amount of intracellular reactive oxygen species and destroying the intracellular defense system. The damage of the cell membrane caused the leakage of intracellular K⁺ and DNA (that could be eventually degraded). Excellent bacterial disinfection performance in PI/solar irradiation systems was achieved in a wide range of solution pH (3-9), with coexisting humic acid (0.1-10 mg L^-1) and broad solution ionic strengths (15-600 mM). The PI/solar irradiation system could also efficiently inactivate Gram-positive Bacillus subtilis. Moreover, PI activated by natural sunlight irradiation could inactivate 1 × 10⁷ CFU mL^-1 viable E. coli below the LOD in the river and sea waters with a working volume of 1 L in 40 and 50 min, respectively. Clearly, the PI/solar system could be potentially applied to disinfect bacteria in water.

Co3 O4 Nanowires Capable of Discharging Low Voltage Electricity Showing Potent Antibacterial Activity for Treatment of Bacterial Skin Infection

Overuse of antibiotics has led to multidrug resistance in bacteria, posing a tremendous challenge to the healthcare system. There is an urgent need to explore unconventional strategies to overcome this issue. Herein, for the first time, we report a capacitive Co₃ O₄ nanowire (NW) electrode coated on flexible carbon cloth, which is capable of eliminating bacteria while discharging, for the treatment of skin infection. Benefiting from the unique NW-like morphology, the Co₃ O₄ NW electrode with increased active sites and enhanced capacitive property exhibits a prominent antibacterial effect against both Gram-positive and Gram-negative bacteria after charging at a low voltage of 2 V for 30 min. Furthermore, the electrode is demonstrated to be recharged for multiple antibacterial treatment cycles without significant change of antibacterial activity, allowing for practical use in a non-clinical setting. More importantly, this Co₃ O₄ NW electrode is capable of damaging bacterial cell membrane and inducing the accumulation of intracellular reactive oxygen species without impairing viability of skin keratinocytes. In a mouse model of bacterial skin infection, the Co₃ O₄ electrode shows significant therapeutic efficacy by eradicating colonized bacteria, thus accelerating the healing process of infected wounds. This nanostructured capacitive electrode provides an antibiotic-free, rechargeable, and wearable approach to treat bacterial skin infection.

Operando Investigation of Locally Enhanced Electric Field Treatment (LEEFT) Harnessing Lightning-Rod Effect for Rapid Bacteria Inactivation

The growth of undesired bacteria causes numerous problems. Here, we show that locally enhanced electric field treatment (LEEFT) can cause rapid bacteria inactivation by electroporation. The bacteria inactivation is studied in situ at the single-cell level on a lab-on-a-chip that has nanowedge-decorated electrodes. Rapid bacteria inactivation occurs at the nanowedge tips where the electric field is enhanced due to the lightning-rod effect. Electroporation induced by the locally enhanced electric field is the predominant mechanism. The antimicrobial performance depends on the strength of the enhanced electric field instead of the applied voltage, and no generation of reactive oxygen species (ROS) is detected when >90% bacteria inactivation is achieved. Quick membrane pore closure under lower voltages confirms that electroporation is induced in LEEFT. This work is the first-time visualization and mechanism elucidation of LEEFT for bacteria inactivation at the single-cell level, and the findings will provide strong support for its future applications.

The experimental and simulation investigation of the dynamic characteristic of submicron-scale aerosol in high-voltage electric field by a visualization method

The high-voltage electric field can effectively capture charged aerosols and has the effect of killing microbial aerosols simultaneously. In this article, an innovative visualization method for investigating the dynamic characteristic of submicron-scale aerosol particles in the high-voltage electric field is developed. Based on reasonable working principles and reliable experimental schemes, the movement of submicron-scale aerosol particles is observed and visualization images in different working conditions are photographed. Besides, with the aid of numerical method and solution of related equations, simulation researches on flow field distribution, electrostatic field characteristics, particle charging and motion behavior characteristics are also carried out. Visualization results prove the linear motion law of aerosol particles in an electric field of 0-3 kV/cm unit. As for 1 µm diameter particle, its migration velocity in 1 kV/cm electric field is measured as 0.016 m/s and 0.019 m/s after positive and negative charging of 1.5 kV voltage, respectively. A reliable calculation formula (η=(V_jq_pL_j)/(3πμD²u_xd_p)) for predicting collection efficiency is derived and established based on actual particle migration velocity. The researches on the migration and capture law of submicron-scale aerosol in the high voltage electric field gives a key reference for the development and design of efficient removal of microbial aerosol and air purification equipment.

Virus Inactivation in Water Using Laser-Induced Graphene Filters

Interest in the pathogenesis, detection, and prevention of viral infections has increased broadly in many fields of research over the past year. The development of water treatment technology to combat viral infection by inactivation or disinfection might play a key role in infection prevention in places where drinking water sources are biologically contaminated. Laser-induced graphene (LIG) has antimicrobial and antifouling surface effects mainly because of its electrochemical properties and texture, and LIG-based water filters have been used for the inactivation of bacteria. However, the antiviral activity of LIG-based filters has not yet been explored. Here we show that LIG filters also have antiviral effects by applying electrical potential during filtration of the model prototypic poxvirus Vaccinia lister. This antiviral activity of the LIG filters was compared with its antibacterial activity, which showed that higher voltages were required for the inactivation of viruses compared to that of bacteria. The generation of reactive oxygen species, along with surface electrical effects, played a role in the mechanism of virus inactivation. This new property of LIG highlights its potential for use in water and wastewater treatment for the electrochemical disinfection of various pathogenic microorganisms, including bacteria and viruses.

Virus Inactivation in Water Using Laser-Induced Graphene Filters

Interest in the pathogenesis, detection, and prevention of viral infections has increased broadly in many fields of research over the past year. The development of water treatment technology to combat viral infection by inactivation or disinfection might play a key role in infection prevention in places where drinking water sources are biologically contaminated. Laser-induced graphene (LIG) has antimicrobial and antifouling surface effects mainly because of its electrochemical properties and texture, and LIG-based water filters have been used for the inactivation of bacteria. However, the antiviral activity of LIG-based filters has not yet been explored. Here we show that LIG filters also have antiviral effects by applying electrical potential during filtration of the model prototypic poxvirus Vaccinia lister. This antiviral activity of the LIG filters was compared with its antibacterial activity, which showed that higher voltages were required for the inactivation of viruses compared to that of bacteria. The generation of reactive oxygen species, along with surface electrical effects, played a role in the mechanism of virus inactivation. This new property of LIG highlights its potential for use in water and wastewater treatment for the electrochemical disinfection of various pathogenic microorganisms, including bacteria and viruses.