Microfiber Masses Recovered from Conventional Machine Washing of New or Aged Garments

Characterization and removal of microplastics in the Guheshwori Wastewater Treatment Plant, Nepal

Contamination of river water systems by microplastic particles (MPPs) is one of the emerging global environmental concerns with potentially widespread ecological, socioeconomic, and health implications. A wastewater treatment plant (WWTP) processes and treats wastewater to remove pollutants and release safe water into the environment. There has been limited research on the characterization of microplastics and their removal in WWTP in South Asia. In this work, we report on the characterization of microplastics in wastewater and sludge samples (n = 300) from Guheshwori WWTP located on the bank of the Bagmati River in Kathmandu city, Nepal representing inlet, secondary aeration tank (SAT), outlet, and sludge from November 2021 to November 2022. On average, we detected 31.2 ± 17.3 MPPs/L, 11.2 ± 9.4 MPPs/L, 8.5 ± 5.6 MPPs/L, and 6.6 ± 4.8 MPPs/g in the samples collected from inlet, SAT, outlet, and sludge, respectively. Commonly found MPPs were in the form of fiber, fragments, foam, and pellets. Largely, MPPs were red, yellow, white, blue, and black. Among the 44 μm - 150 μm, 150 μm - 500 μm and 500 μm - 5 mm categories of size fractions, the most dominant fractions were 500 μm - 150 μm in inlet, SAT, and sludge, and 150 μm - 44 μm in the outlet sampling unit. The Guheshwori WWTP was able to remove 72.5 % of MPPs on average, that mostly occurred in the inlet. The effluent released into the river and the sludge still contained a significant number of MPPs.

Release of microplastic fibers from synthetic textiles during household washing

Textile materials are one of the primary sources of microplastic pollution. The washing procedure is by far the most significant way that textile products release microplastic fibers (MPFs). Therefore, in this study, the effects of various textile raw materials (A acrylic, PA polyamide, PET polyester, RPET recycled polyester and PP polypropylene), fabric construction properties (woven, knitted), thickness and basis weight values on MPFs release at different washing stages (pre-washing, soaping/rinsing) were examined separately. To mimic the most popular home washing procedures, a 10-minute pre-wash and a 35-minute soaping/rinsing phase at 40°C were selected for the washing procedure. Utilizing the Image J program on macroscopic images captured by a high-resolution SL.R camera, the microfibers collected by filtering the water have been visually counted. According to the results, knitted fabrics released fewer MPFs than woven fabrics, with the woven acrylic sample (A3-w) exhibiting the highest release (2405 MPFs). The number of MPFs increased along with the thickness and weight of the fabric. Recycled polyester was found to release more MPFs than virgin polyester under the same conditions (1193 MPFs vs. 908 MPFs). This study demonstrates how recycled polyester, although initially an environmentally beneficial solution, can eventually become detrimental to the environment. Furthermore, it is known that the pre-washing procedure-which is optional-releases a lot more MPFs than the soaping and rinsing procedures, and that stopping this procedure will drastically lower the amount of MPFs incorporated into the water.

Understanding microplastic presence in different wastewater treatment processes: Removal efficiency and source identification

Municipal effluents discharged from wastewater treatment plants (WWTPs) are a considerable source of microplastics in the environment. The dynamic profiles of microplastics in treatment units in WWTPs with different treatment processes remain unclear. This study quantitatively analyzed microplastics in wastewater samples collected from different treatment units in two tertiary treatment plants with distinct processes. The influents contained an average of 15.5 ± 3.5 particles/L and 38.5 ± 2.5 particles/L in the two WWTPs with in the oxidation ditch process and the integrated fixed-film activated sludge process, respectively. Interestingly, microplastic concentrations in the influent were more influenced by the population density in the served area than sewage volume or served population equivalent. Throughout the treatment process, concentrations were reduced to 1.5 ± 0.5 particles/L and 1.0 ± 1.0 particles/L in the final effluents, representing an overall decrease of 90% and 97%, in WWTPs with the oxidation ditch process and integrated fixed-film activated sludge process, respectively. A significant proportion of the microplastics were removed during the primary treatment stage in both WWTPs, with better performance for foam, film, line-shaped and large-sized microplastics. Most microplastics were accumulated in activated sludge, indicating its key role as the primary sink in WWTPs. The multiple correspondence analysis identified laundry washing and daily necessities such as packaging and containers as the major contributors to microplastics in WWTPs. The study proposed recommendations for upgrading WWTPs, modifying designs, and implementing strategies to reduce microplastic sources, aiming to minimize the release of microplastics into the environment. These findings can shed lights on the sources of microplastics in WWTPs, and advance our understanding of the mechanisms for more effective microplastic removals in wastewater treatment technologies in future applications.

Microfiber emission from a municipal wastewater treatment plant in Hungary

Since the ingestion of both natural and anthropogenic microfibers produces a deleterious effect on aquatic organisms, it is crucial to explore the emission of these pollutants by WWTPs into the receiving water bodies, such as rivers. Cellulose- and petroleum-based microfibers, as well as microplastic particles, were collected from the effluent of a municipal WWTP operating with activated sludge technology in Budapest, Hungary. During two sampling campaigns organized in February and April of 2023 on different working days and at different times of the day, 123-145 L of effluent was sieved and filtered. The organic matter was removed by hydrogen-peroxide treatment. All fibers and particles larger than 10 µm were counted, and using a fluorescence microscope, the fibers were geometrically characterized in terms of length and diameter. Each fiber was individually identified by transflection-FT-IR method. The fiber concentration varied in the range of 1.88-2.84 and 4.25-6.79 items/L during the 7th and the 16th week of 2023, respectively. In February and April, the proportion of microfibers in the solid particles was 78.3 and 94.7%, respectively. In the effluent the cellulose-based microfibers were dominant (53-91%), while among the petroleum-based microfibers, polyester occurred most often. The median length of cellulose-based fibers was considerably higher in April than in February (650 vs. 1250 µm), and simultaneously the median diameter also increased from 21 to 29 µm. This behaviour was also seen, albeit to a lesser extent, in connection to microfibers derived from petroleum. The treated wastewater's daily microfiber transport to the Danube River varied between 0.44 - 0.69 and 0.94-1.53 billion in February and April 2023, respectively.

Innovative tarantula hair-inspired washing machine filters for enhanced microfiber capture

Aquatic environments are being polluted by microplastics primarily originating from the washing of synthetic textiles. Microfibers (MF), which are microplastics in synthetic fibers, are consistently introduced into the environment with each domestic laundry cycle. To address this issue, we developed a specialized MF capture "barbed filter" (BF) by transforming PET monofilaments of different diameters (0.4, 0.6, and 0.8 mm) into structures that closely resemble the characteristics of tarantula urticating hairs. BFs feature sharp barbs that effectively capture and retain microfibers of diverse lengths, surpassing the performance of conventional control filters. The BFs had a retention efficiency of 88-91 %, while the CFs had an efficiency of 79-86 %. Our findings revealed that the barbed filter significantly outperformed the conventional control filter in capturing microfibers due to its smaller pore size, shorter pore distance, and unique filter shape. This design not only enhances the surface area and friction, facilitating microfibril strong entrapment but also minimizes the probability of microfibril passage through the filter. This research offers a promising solution for reducing microfibril release from laundry and textile industrial wastewater. The implementation of BFs in real life has the potential to significantly reduce microplastic pollution and promote a cleaner and more sustainable environment.

Mapping Plastic and Plastic Additive Cycles in Coastal Countries: A Norwegian Case Study

The growing environmental consequences caused by plastic pollution highlight the need for a better understanding of plastic polymer cycles and their associated additives. We present a novel, comprehensive top-down method using inflow-driven dynamic probabilistic material flow analysis (DPMFA) to map the plastic cycle in coastal countries. For the first time, we covered the progressive leaching of microplastics to the environment during the use phase of products and modeled the presence of 232 plastic additives. We applied this methodology to Norway and proposed initial release pathways to different environmental compartments. 758 kt of plastics distributed among 13 different polymers was introduced to the Norwegian economy in 2020, 4.4 Mt was present in in-use stocks, and 632 kt was wasted, of which 15.2 kt (2.4%) was released to the environment with a similar share of macro- and microplastics and 4.8 kt ended up in the ocean. Our study shows tire wear rubber as a highly pollutive microplastic source, while most macroplastics originated from consumer packaging with LDPE, PP, and PET as dominant polymers. Additionally, 75 kt of plastic additives was potentially released to the environment alongside these polymers. We emphasize that upstream measures, such as consumption reduction and changes in product design, would result in the most positive impact for limiting plastic pollution.

Effect of the age of garments used under real-life conditions on microfibre release from polyester and cotton clothing

The release of microfibres from fabrics during laundering represents an important source of plastic and natural microfibres to aquatic environments. Garment age - how long the garment has been used - could be a key factor influencing the rate of release, yet most studies of microfibre shedding have only assessed newly manufactured products. To this end, we quantified microfibre release during laundering in domestic washing machines from polyester (PES) and cotton garments (n = 38) used in real-life conditions for periods between 1 and 31 years with different use intensities. In addition, to better understand the factors involved in microfibre releases, fibre composition (different PES percentages) and type of garments (T-shirts, polo shirts, uniforms, sports shirts, and sweatshirts) were examined. All garments released microfibres during washing, while the older garments presented higher releases for clothing with a PES/cotton blend. In general, older garments (15-31 years) released nearly twice as many fibres when washed than newer garments (1-10 years). The mass of microfibres released was consistently greater in garments with a higher proportion of cotton than PES (up to 1.774 mg g-1 in 2% PES and 0.366 mg g-1 in 100% PES fabrics), suggesting that cotton might be released more readily such that the relative proportion of PES in the garments could increase over time. Additionally, SEM images showed fibre damage, with fibres from the older garments exhibiting more peeling and splitting. While it is important to note that the overall environmental footprint is undoubtedly reduced by keeping garments in use for longer periods of time, older garments were shown to release more microfibres.

Microplastics Prevalence in Different Cetaceans Stranded along the Western Taiwan Strait

Microplastics (MPs) pollution is of global concern, which poses serious threats to various marine organisms, including many threatened apex predators. In this study, MPs were investigated from nine cetaceans of four different species, comprising one common dolphin (Delphinus delphis), two pygmy sperm whales (Kogia breviceps), one ginkgo-toothed beaked whale (Mesoplodon ginkgodens), and five Indo-Pacific humpback dolphins (Sousa chinensis) stranded along the western coast of the Taiwan Strait from the East China Sea based on Fourier transform infrared (FTIR) spectroscopy analysis. Mean abundances of 778 identified MPs items were 86.44 ± 12.22 items individual-1 and 0.43 ± 0.19 items g-1 wet weight of intestine contents, which were found predominantly to be transparent, fiber-shaped polyethylene terephthalate (PET) items usually between 0.5 and 5 mm. The abundance of MPs was found at a slightly higher level and significantly correlated with intestine contents mass (p = 0.0004*). The MPs source was mainly likely from synthetic fibers-laden sewage discharged from intense textile industries. Our report represents the first study of MPs in pelagic and deep-diving cetaceans in China, which not only adds baseline data on MPs for cetaceans in Asian waters but also highlights the further risk assessment of MPs consumption in these threatened species.

Investigation on microfiber release from elastane blended fabrics and its environmental significance

Elastane blended apparel is one of the most preferred items by consumers with fashion interest due to its enhanced comfort and fit. The environmental impact and microfiber release due to elastane usage is often ignored due to its lower percentage in apparel. To address such a gap, this study aimed to quantify and characterize the microfiber release behavior of cotton/elastane knitted fabric. Cotton/Elastane blended knitted fabrics with three different proportions of Cotton/Elastane (98/2, 95/5, and 92/8) were considered for this analysis. Upon laundry and quantification, the results of the study showed that 98/2 Cotton/Elastane fabric released 21.04 ± 12.46 microfibers/sq.cm, whereas, 92/8 Cotton/Elastane fabric released 46.56 ± 6.21 microfibers/sq.cm. An increase in elastane proportion increased the overall emission of microfibers per unit area of fabric. The results also showed a higher contribution of elastane fibers in the total microfibers released. 13.40% of the total fibers released were elastane microfibers in the case of 98/2 Cotton/Elastane fabric, whereas, 92/8 Cotton/Elastane fabric released 19.60% of elastane microfibers. The elastane percentage of the fabric showed a significant positive correlation with total microfiber emission (r = 63%) and elastane microfiber emission (r = 62%). Repeated laundering results showed an overall reduction in microfiber emissions in subsequent washes. However, interestingly, an increase in the wash cycle increased the proportion of elastane microfibers in the total microfibers released. 92/8 Cotton/Elastane fabric released 20% of elastane microfibers in the first wash and the proportion increased to 36% in the 4th wash. In contrast to that, the release of cotton microfibers is noted to decrease with the number of laundry cycles. As far as the length of microfiber is considered, elastane microfibers are shorter than cotton microfibers. The length of elastane microfibers was higher in the initial wash (98/2 Cotton/Elastane fabric - 352.5 μm; 95/5 Cotton/Elastane fabric - 920 μm; 92/8 Cotton/Elastane fabric - 695 μm) and it is reduced with increment in the number of washes with a strong negative correlation of -0.88. A higher proportion of emissions and lower fiber length are the alarming negative impacts of elastane fibers in apparel. Based on this analysis, it is estimated that one square meter of fabric with a lower elastane percentage (2%) can release up to 2.81 × 104 microfibers into the environment at the first wash. The threatening issues of microfibers on aquatic life, particularly in terms of bioaccumulation and biomagnification, are alarming. Elastane blended fabrics should be given special attention because they can make the problem more serious by posing a risk of chemical leachates, such as bisphenols.

Disperse dyes, temperature and yarn parametre's effect on microfibre shedding of polyester spun yarn

The yarn dyeing factories discharge liquid waste laden with a variety of hazardous substances, including microplastic fibre (MPFs), which are found in aquatic ecosystems. During dyeing, MPF shedding factors were determined in this study. Shedding factors were determined at six polyester yarn dyeing factories to assess MPF release for (1) dark and (2) light shading. Three dyeing processes were considered including normal, carrier and high temperature. Sawdust-based activated carbon was utilized to decolourize dye wastewater. Flocculation and clarification were done without a flotation process to obtain low-density MPF. A hot needle test was applied to visual identification under an optical microscope and quantification was done by filtering, weighting and count of the yarn. A maximum of 0.00399 % weight loss (wt.) was found for dark shade in the high-temperature dyeing process and 0.00392 % (light) was found in carrier dyeing to dye a coarser yarn. In contrast, 0.4562 mg L-1 fibre particles (≤ 0.225 mm) shedding in normal dyeing, for a light shade, was observed to a fine yarn where a minimum of 0.00138 % wt. was found. Shorter fibre length, higher denier, and courser yarn were associated with the greatest MPF discharge at high-temperature dyeing for a dark shade. The usual effluent treatment plant (ETP) of the textile industry can remove only 75.52 % MPFs of wastewater. Shedding of MPF during dyeing is remarkably higher than the domestic wash cycle of garments. Wastewater of textiles containing MPFs would appear as a regular and extensive initial source of MP emissions, which can damage the ecological system.

Impact of quantification method on microfiber assessment - A comparative analysis between mass and count based methods

Microfiber from textiles is one of the new anthropogenic pollutants which attracted a wide range of researchers. Domestic laundry, being the most common cause of microfiber release from textiles, is widely studied. Studies exhibit a broad range of quantities of microfibers owing to the distinct quantification methodologies employed due to their convenience and resource availability. Out of several such estimation processes, reporting microfiber quantity in numbers or mass (mg or g) is quite common with respect to the unit area or weight of the textile used. However, results reported by different literature vary significantly. Hence, this study aims to analyze the microfiber release from knitted polyester fabric using count- and mass-based methods. Four different fabrics were used for this study with three different counting processes from literature along with direct weight difference estimation. The results of the direct counting method showed that the average microfiber release of selected fabrics is 13.28-33.16 microfibers per sq.cm, whereas, the direct weight estimation showed an average weight of 0.0664 ± 0.0289 mg/sq.cm. The subsequent conversion showed a release of 887.89 ± 633.49 microfibers/sq.cm of the fabric. Further, the microfiber mass was also estimated using the number of microfiber count and found that a sq.cm of fabric releases up to 0.0010-0.0024 mg of microfibers. While comparing the results, the weight-based estimation showed a significantly higher microfiber release (41.3-42.9 times) than the direct counting method. The deposition of surfactants in detergents, contaminants from the water, atmospheric contaminants, and finishes released from the fabric can be the sources of additional weights noted in the direct mass estimation. As the weight-based method is quite simple and the fastest way to quantify the microfibers, future studies must focus on this area to reduce the error percentage in quantification.

Removal characteristics of microplastics in sewage flowing through a long-term operation surface flow wetland

Microplastics (MPs) in sewage pose significant threats to aquatic system. Surface flow wetland (SFW) is a common natural wetland type, and is also used as a cheap and easy-to-build sewage treatment system for small and scattered settlements. However, seasonal variation patterns of MPs in sewage removed by SFW are still limited. Therefore, a field investigation was conducted in an SFW that has been operated for 17 years. The concentration of microplastics in the influent of the SFW (CMPs, in) ranged from 56 ± 6 to 250 ± 14 items L-1. The dominant plastic types were fibers and polyethylene terephthalate (PET). CMPs, in were high in summer and winter, significantly related to the seasonal dressing habits. The removal efficiencies of MPs in SFW were 48.03-92.32 % in different seasons, and the mechanisms of MP removal were different with traditional pollutants. Before flowing out occasionally or by heavy precipitation, MPs were primarily trapped in the SFW and underwent certain oxidation. Simulation experiments demonstrated that 47.5-92.9 % of MPs would be trapped in the SFW, and plants would significantly enhance the trapping capacities. This study sheds light on the seasonal variation characteristics and patterns of MPs in actual sewage, and clarifies the fate of MPs in a long-term operation SFW.

Exposure sources and pathways of micro- and nanoplastics in the environment, with emphasis on potential effects in humans: A systematic review

Microplastics (MPs) are emerging pollutants that are ubiquitous in the environment, and may be a potential threat to human health. This review describes the MP exposure sources and pathways through drinking water, food intake, and air inhalation. The unregulated discharge of MPs in water sources and the absence of required MP filter technology in water treatment plants are important routes of MP exposure through drinking water. The presence of MPs in food may lead to the accumulation of MPs in the body. Exposure to MPs can occur through airborne fallout and dust inhalation in both indoor and outdoor environments. This review summarizes the MP exposure sources and possible pathways in the human body, and illustrates that the intake of drinking water, food consumption, and air inhalation should be assessed in during routine activities. Integr Environ Assess Manag 2023;19:1422-1432. © 2023 SETAC.

Polyester microplastic fibers induce mitochondrial damage, apoptosis and oxidative stress in Daphnia carinata, accompanied by changes in apoptotic and ferroptosis pathway

With the widespread utilization of plastic products, microplastics (MPs) have merged as a newfound environmental contaminant in the United States, and the bulk of these MPs in the environment manifest as fibrous structures. Concerns have also been voiced regarding the potential hazards posed by microplastic fibers (MFs). However, research examining the toxicity of MFs, particularly in relation to planktonic organisms, remains severely limited. Meanwhile, polyester fiber materials find extensive applications across diverse industries. As a result, this investigation delved into the toxicology of polyester microplastic fibers (PET-MFs) with a focus on their impact on Daphnia carinata (D. carinata), a freshwater crustacean. Newly hatched D. carinata were subjected to varying concentrations of PET-MFs (0, 50, and 500 MFs/mL) to scrutinize the accumulation of PET-MFs within these organisms and their resultant toxicity. The outcomes revealed that D. carinata was capable of ingesting PET-MFs, leading to diminished rates of survival and reproduction. These effects were accompanied by mitochondrial impairment, heightened mitochondrial count, apoptosis, escalated generation of reactive oxygen species, augmented activity of antioxidant enzymes, and distinct patterns of gene expression. Interestingly, when comparing the group exposed to 50 MFs/mL with the one exposed to 500 MFs/mL, it was observed that the former triggered a more pronounced degree of mitochondrial damage, apoptosis, and oxidative stress. This phenomenon could be attributed to the fact that brief exposure to 500 MFs/mL resulted in greater mortality, eliminating individuals with lower adaptability. Those that survived managed to regulate elevated in vivo reactive oxygen species levels through an increase in glutathione S-transferase content, thereby establishing an adaptive mechanism. Low concentrations did not induce direct mortality, yet PET-MFs continued to inflict harm within the organism. RNA-seq analysis unveiled significant alterations in 279 and 55 genes in the 50 MFs/mL and 500 MFs/mL exposure groups, respectively. Functional enrichment analysis of the 50 MFs/mL group indicated involvement of the apoptosis pathway and ferroptosis pathway in the toxic effects exerted by PET-MFs on D. carinata. This study imparts valuable insights into the toxicological ramifications of PET-MFs on D. carinata, underscoring their potential risks within aquatic ecosystems.

Effects of virgin and BaP-adsorbed microplastics ingestion by Manila clams (Ruditapes philippinarum)

Numerous microplastic-related studies have investigated the impact of plastic materials on the marine food chain. In this study, Manila clams were exposed to microplastic (MP) of various polymer types, shapes, and concentrations to determine the ingestion selectivity and adverse effects caused. Benzo[a]pyrene was introduced as the second stressor to investigate the role of MP as a vector of contaminant. The result of a 2-day acute exposure showed that clams are more likely to ingest those in sphere shapes due to their similarity to microalgae. The feeding rate continuously declined when clams were exposed to at least 2to/L particles. Additionally, co-exposure of MP and B[a]P resulted in higher DNA fragmentation but lower catalase activity compared to single exposure to MP. Our study revealed that the uptake of MP by clams is not only determined by its shape and concentration but also by the presence of existing contaminants.

Wastewater treatment plants elevating microplastic abundances, ecological risks, and loads in Japanese rivers: a source-to-sink perspective

Little were certain about how wastewater treatment plants (WWTPs) affected the Japanese riverine microplastic contamination. This study explored the influences of WWTPs on microplastic pollution, assessed ecological risks, and looked at the sources-to-sinks phenomenon (WWTPs-to-rivers-to-marine) in riverine settings in Japan's Yamaguchi prefecture. Fifty surface water samples from the five selected rivers (Koya, Saba, Shimaji, and Fushino, Nishiki) and 11 effluent samples from WWTPs in the rivers' catchment were examined. Microplastics were analyzed using filtration, wet-peroxidation, density-separation, and attenuated reflectance-Fourier transform infrared spectroscopy techniques. Results suggested that the less populated and rural river (Nishiki) was less contaminated compared to the WWTPs and urban areas affected rivers (Koya, Saba, Shimaji, and Fushino). The WWTPs increased microplastic abundance twofold in the downstream regions compared to upstream stations. Microplastic characterization showed that the smaller microplastics < 500 µm, fiber-shaped, transparent, blue, and green color particles were major. Polymer identification demonstrated that the polyethylene, polypropylene, and polyethylene terephthalate were prevalent both for the rivers and WWTP effluents. There was a significant emission of microplastics from WWTPs to rivers (4.671 billion pieces per day; 71.8 kg per day) and rivers to Seto Inland Sea (0.13/billion pieces per day/km2; 7.1 kg per day). The per capita MP emissions to the rivers via WWTPs ranged from 0.02 to 6.49 g per day, which was approximately 2% of per capita single-use plastic wastes in Japan. An assessment of ecological risks showed that the WWTPs posed high ecological risks to rivers, and built up the pollution hotspots to their downstream areas by releasing higher number of microplastics and highly toxic polymers. Overall, the WWTPs influenced the rivers through both abundances and characteristics (shapes-size-color-polymers), increased the complexity of microplastic compositions as well as elevated ecological risks in the rivers. This study contributed to bridging the knowledge gaps about microplastic sources-to-sinks, ecological risks, and pollution management in Japan and beyond.

A review on the occurrence, analytical methods, and impact of microplastics in the environment

Nowadays, microplastic pollution is one of the globally urgent concerns as a result of discharging plastic products into the atmosphere, aquatic and soil environments. Microplastics have average size of less than 5 mm, are non-biodegradable, accumulative, and highly persistent substances. Thousands of tons of microplastics are still accumulated in various environments, posing an enormous threat to human health and living creatures. Here, we review the occurrence and analytical methods, and impact of microplastics in the environments including soil, aquatic media, and atmosphere. Analytical methods including visual observation, Fourier-transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, and pyrolysis-gas chromatography-mass spectrometry were evaluated. We elucidated the environmental and human health impacts of microplastics with emphasis on life malfunction, immune disruption, neurotoxicity, diseases and other tangible health risks. This review also found some shortages of analytical equivalence and/or standardization, inconsistence in sampling collection and limited knowledge of microplastic toxicity. It is hopeful that the present work not only affords a more insight into the potential dangers of microplastics on human health but also urges future researches to establish new standardizations in analytical methods.

Microplastics: a review of their impacts on different life forms and their removal methods

The pollution of microplastics (MPs) is a worldwide major concern, as they have become a major part of our food chain. MPs enter our ecosystem via different pathways, including anthropogenic activities and improper disposal of plastics. The aim of this article is to review the current scientific literature related to MPs and how they affect different life forms on earth. Briefly, MPs induced negative effects on humans are primarily linked with the oxidative stress and disruption in immunity. MPs not only affect the soil chemical and physical properties such as reduction in soil health and productivity but also impose harmful effects on soil microorganisms. Moreover, MP-induced plant growth reduction results from three complementary mechanisms: (i) reduction in root and shoot growth, (ii) reduction in photosynthesis accompanied by higher reactive oxygen species (ROS) production, and (iii) reduction in nutrient uptake via altered root growth. Given the negative effects of MPs on different life forms, it is important to remove or remediate them. We have discussed different MP removal methods including coagulation, membrane filtration technology, biochar, and biological degradation of MPs in soil and wastewater effluents. The use of ozone as ultrafiltration technique has also been shown as the most promising technique for MP removal. Finally, some future research recommendations are also put forward at the end to further enhance our understanding of the MPs induced negative effects on different life forms. The flowchart shows the interaction of MPs from water contaminated with MPs with different parts of the ecosystem and final interaction with human health.

Contamination and removal efficiency of microplastics and synthetic fibres in a conventional drinking water treatment plant in Geneva, Switzerland

Although it is known that freshwater resources are contaminated with microplastics (MPs), still limited information is known about the efficiency of large drinking water treatment plants (DWTP) to remove microplastics. Moreover, reported concentrations of MPs in drinking water variates from some units to thousands of units per litre and the sampling volumes used for MPs analysis are generally heterogeneous and limited. The present study evaluates the removal of MPs and synthetic fibres in the main DWTP of Geneva, Switzerland, by considering large sampling volumes at different time intervals. Furthermore, contrary to other studies, this DWTP does not count with a clarification process before sand filtration and coagulated water is sent directly to sand filtration. In this study a distinction is made between microplastics as fragments, films, pellets, and synthetic fibres. Raw water and effluents of each filtering mass (sand and activated carbon filtration) are analysed for the presence of MPs and synthetic fibres with sizes ≥63 μm using infrared spectroscopy. Concentrations of MPs in raw water range from 25.7 to 55.6 MPs/m³ and in treated water from 0 to 4 MPs/m³, respectively. Results show that 70 % of MPs are retained during sand filtration and total removal is equal to 97 % in treated water after activated carbon filtration. Concentration of identified synthetic fibres is low (average value of 2 synthetic fibres/m³) and constant in all steps of water treatment. Chemical composition of microplastics and synthetic fibres is found more heterogeneous in raw water than after sand filtration and activated carbon filtration, indicating the persistence of some types of plastics (like polyethylene and polyethylene terephthalate) in water treatment processes. Heterogeneities in MP concentrations are observed from one sampling campaign to another, indicating significant variations of MP concentrations in raw water.

Environmentally Friendly Approach to the Reduction of Microplastics during Domestic Washing: Prospects for Machine Vision in Microplastics Reduction

The increase in the global population is directly responsible for the acceleration in the production as well as the consumption of textile products. The use of textiles and garment materials is one of the primary reasons for the microfibers generation and it is anticipated to grow increasingly. Textile microfibers have been found in marine sediments and organisms, posing a real threat to the environment as it is invisible pollution caused by the textile industry. To protect against the damaging effects that microplastics can have, the formulation of mitigation strategies is urgently required. Therefore, the primary focus of this review manuscript is on finding an environmentally friendly long-term solution to the problem of microfiber emissions caused by the domestic washing process, as well as gaining an understanding of the various properties of textiles and how they influence this problem. In addition, it discussed the effect that mechanical and chemical finishes have on microfiber emissions and identified research gaps in order to direct future research objectives in the area of chemical finishing processes. In addition to that, it included a variety of preventative and minimizing strategies for reduction. Last but not least, an emphasis was placed on the potential and foreseeable applications of machine vision (i.e., quantification, data storage, and data sharing) to reduce the amount of microfibers emitted by residential washing machines.

A new point to correlate the multi-dimensional assessment for the aging process of microfibers

Fiber, the most prevalent plastic type, can be weathered and eroded easily in the natural environment. Although a variety of techniques have been applied to characterize the aging characteristics of plastics, a comprehensive understanding was critically essential to correlate the multi-dimensional assessment of the weathering process of microfibers and their environmental behavior. Therefore, in this study, microfibers were prepared from the face masks and Pb²⁺ was selected as a typical metal pollutant. The weathering process was simulated by xenon aging and chemical aging, and then subjected to Pb²⁺adsorption to examine the effect of weathering processes. The changes in fiber property and structure were detected by using various characterization techniques, with the development of several aging indices to quantify the changes. The two-dimensional Fourier transform infrared correlation spectroscopy analysis (2D-FTIR-COS) and Raman mapping were also performed to understand the order of changes in the surface functional groups of the fiber. The results showed that both aging processes altered the surface morphology, physicochemical properties, and polypropylene chain conformations of the microfibers, with stronger effect after chemical aging. The aging process also enhanced the affinity of microfiber to Pb²⁺. Moreover, the changes and correlation of the aging indices were analyzed, showing that the maximum adsorption capacity (Q_max) was positively related to carbonyl index (CI), oxygen-to-carbon atom (O/C) ratio and intensity ratio of the Raman peaks (I_841/808), but negatively related to contact angle and the temperature at the maximum weight loss rate (T_m). The O/C ratio was more suitable to quantify the surface changes with lower aging degree while the CI value explained the chemical aging process better. Overall, this study discussed the weathering processes of microfibers based on a multi-dimensional investigation, and attempted to correlate the aging characteristics of the microfibers and their environmental behavior.

Residential houses - a major point source of microplastic pollution: insights on the various sources, their transport, transformation, and toxicity behaviour

Municipal wastewater has been considered as one of the largest contributors and carriers of microplastics to the aquatic environment. However, the various residential activities that generate municipal wastewater are equally significant whenever the source of microplastics in aquatic system is accounted. However, so far, only municipal wastewater has received wide attention in previous review articles. Hence, this review article is written to address this gap by highlighting, firstly, the chances of microplastics arising from the usage of personal care products (PCPs), laundry washing, face masks, and other potential sources. Thereafter, the various factors influencing the generation and intensity of indoor microplastic pollution and the evidence available on the possibility of microplastic inhalation by humans and pet animals are explained. Followed by that, the removal efficiency of microplastics observed in wastewater treatment plants, the fate of microplastics present in the effluent and biosolids, and their impact on aquatic and soil environment are explored. Furthermore, the impact of aging on the characteristics of microsized plastics has been explored. Finally, the influence of age and size of microplastics on the toxicity effects and the factors impacting the retention and accumulation of microplastics in aquatic species are reviewed. Furthermore, the prominent pathway of microplastics into the human body and the studies available on the toxicity effects observed in human cells upon exposure to microplastics of different characteristics are explored.

Fibrous microplastics released from textiles: Occurrence, fate, and remediation strategies

Microplastics (MP), i.e., particles measuring less than 5 mm in size, are considered emerging pollutants. The ubiquity of MP is causing great concern among environmental and public health agencies. Anthropogenic activities are responsible for the extensive dispersal of MP in nature. Adverse effects on living organisms, interactions with other contaminants occurring in the environment, and the lack of effective degradation/removal techniques are significant issues related to MP. Most MP found in nature are fibrous (FMP). FMP originate from textile products, mainly synthetic fibers (e.g., polyester). Synthetic fibers are intensively used to produce countless goods due to beneficial characteristics such as high mechanical resistance and economic feasibility. FMP are ubiquitous on the planet and impart lasting adverse effects on biodiversity. Data on the consequences of long-term exposure to these pollutants are scarce in the literature. In addition, few studies address the main types of synthetic microfibers released from textiles, their occurrence, adverse effects on organisms, and remediation strategies. This review discusses the relevant topics about FMP and alerts the dangers to the planet. Furthermore, future perspectives and technological highlights for the FMP mitigation/degradation are presented.

Microplastics as an emerging menace to environment: Insights into their uptake, prevalence, fate, and sustainable solutions

The inflated demand for plastic products has led to tremendous rise in plastic debris in different environmental matrices, thereby resulting in plastic pollution. This affects plants, animals, and even humans, as microplastics can enter the food chain and cause several health implications. Microplastics are the small plastic particles (size below 5 mm) that are largely debated nowadays owing to their environmental risk assessment. Their potential to interact with other toxic contaminants, their tendency to be ingested or taken up by living organisms and their longevity is a serious threat to our environment. However, despite wealth of recent information, still there is a gap, particularly in eco-toxicology studies, fate, prevalence and feasible solutions to cope up with the menace of microplastics pollution. This review unravels the environmental fate and behaviour of microplastics as well as their global distribution in the marine and terrestrial environment. Furthermore, we aim to contribute to the international debate on the microplastics global paradigm. We briefly suggest sustainable solutions and recommendations to achieve future research goals on microplastics. Our review reveals some of the newest biological (green algae and modified sponges) and physical (nano-particles and membrane treatment) remediation solutions to eradicate microplastics from different types of environment. This review presents a critical evaluation of the state of knowledge of micro-plastics and suggested some recommendations which can help in identifying some important key questions for future research.

Microplastic Presence in the Digestive Tract of Pearly Razorfish Xyrichtys novacula Causes Oxidative Stress in Liver Tissue

Plastic pollution in the oceans is a growing problem, with negative effects on exposed species and ecosystems. Xyrichtys novacula L. is a very important fish species both culturally and economically in the Balearic Islands. The aim of the present study was to detect and categorise the presence of microplastics (MPs) in the digestive tract of X. novacula, as well as the existence of oxidative stress in the liver. For this purpose, the fish were categorised into two groups based on the number of MPs observed in the digestive tracts: a group with no or low presence of MPs (0-3 items) and a group with a higher presence of MPs (4-28 items). MPs were found in 89% of the specimens analysed, with a dominance of fibre type and blue colour. Regarding the type of polymer, polycarbonate was the most abundant, followed by polypropylene and polyethylene. For the group with a greater presence of MPs, the activities of the antioxidant enzymes glutathione peroxidase and glutathione reductase, as well as the phase II detoxification enzyme glutathione s-transferase, were higher than the activities observed in fish with little to no presence of MPs. The activities of catalase and superoxide dismutase and the levels of malondialdehyde did not show significant differences between both groups. In conclusion, these results demonstrate the presence of MPs in the digestive tract of X. novacula and the existence of an antioxidant and detoxification response, mainly based on the glutathione-based enzymes.

Microplastics in terrestrial ecosystem: Sources and migration in soil environment

Plastics, especially microplastics in soils, are considered a severe environmental issue worldwide. However, globally, the main research focus is on microplastic pollution in the marine environment, the microplastic pollution on soils and sediments remains on the sideline so far. But the fact is that microplastics are omnipresent in terrestrial systems in the form of microbeads in industrial systems and in sewage sludge. Their presence in agricultural soils and sediments is enormously increased due to plastic mulching, plastic greenhouses and compost and extensive use of controlled release fertilizers. Therefore, this review outlines the global scenario regarding plastics and microplastics production, consumption, and possible pathways of penetration into the soil environment. Various mechanisms to restrict and manage the pathways of plastics and microplastics into the soil environment are also discussed. This review also focuses on the challenges and limitations on the use of plastic alternates such as bioplastics and oxo plastics. Also, the knowledge gaps on the source of microplastics in the environment and their deleterious effects on properties of soil, soil health and focused light on their soil trophic transfer in food chains via plants. This review provides a detailed insight on the management and possible control measures to alleviate the potential risk caused by microplastics pollution in the soil environment and the overall ecosystem's health. In spite of the occurrence and fate of microplastics on terrestrial environment, knowledge gaps and challenges for tackling this contamination are also explored which facilitates the policy makers to develop regulatory measures towards the containment of microplastics in living ecosystem.

Quantification of microfibre release from textiles during domestic laundering

Domestic laundering of textiles is being increasingly recognised as a significant source of microfibre pollution. Reliable quantification of microfibre release is necessary to understanding the scale of this issue and to evaluate the efficacy of potential solutions. This study explores three major factors that influence the quantification of microfibres released from the domestic laundering of textiles: test methodologies, laundering variables, and fabric variables.A review of different test methods is presented, highlighting the variation in quantification created by using different methodologies. A reliable and reproducible method for quantifying microfibre release from domestic laundering is used to explore the impact of laundering and fabric variables experimentally. The reproducibility and reliability of the method used was validated through inter-laboratory trials and has informed the development of European and international testing standards. Our results show that increasing the wash liquor ratio and wash agitation results in a greater mass of microfibres released, but we found that fabric variables can have a greater influence on microfibre release than the laundering variables tested in this study. However, no single fabric variable appeared to have a dominant influence.Using the data obtained and assumptions for washing load size and frequency, results were scaled to reflect possible annual microfibre release from untreated domestic laundering in the UK. Depending on different laundering and fabric variables, these values range from 6490 tonnes to 87,165 tonnes of microfibre discharged in the UK each year.

The role of seagrass meadows in the accumulation of microplastics: Insights from a South African estuary

Microplastics are widespread in marine ecosystems, where they threaten biota and human wellbeing. Seagrasses may act as natural filters of microplastics due to their particle trapping abilities, yet little is known about the extent of microplastics in the sediment of seagrass beds. The aim of this study was to compare microplastic accumulation in the sediments of Zostera capensis meadows with adjacent bare sediments at a small spatial scale (~5 km) in the Knysna estuary in South Africa. No significant difference in total microplastic counts were found between seagrass and unvegetated sediments. However, fibre microplastic counts differed significantly between the two locations at which samples were collected. This may be due to pollution levels and proximity to larger human population densities. Importantly, our study reveals variability in microplastic abundance and type even at small spatial scales, an important consideration for the design of future studies aiming to monitor for microplastics.

Detection of microplastic fibers tangle in deep-water rose shrimp (Parapenaeus longirostris, Lucas, 1846) in the northeastern Mediterranean Sea

Microplastic (MP) pollution in marine environments has been a major global concern in recent years. Microplastic particles pose a threat in aquatic animals by accumulating in their digestive system, acting like a pollution vector, and they can also transfer to upper trophic levels. For that reason, commercially important deep-water rose shrimp Parapenaeus longirostris were employed in this study to examine the MP pollution status of two different regions (Samandağ and Mersin offshore waters) of the northeastern Mediterranean Sea. MPs were detected in all examined specimens (average of 18.8 MPs ind-1), and fiber tangle-shaped like balls were observed by 22% and 9% at Samandağ and Mersin, respectively. P. longirostris individuals from Samandağ showed higher occurrence (100%) and higher accumulation (29.7 ± 24.4 MPs ind-1). MP abundance extracted from the shrimp individuals from Samandağ region was higher than that of previously reported shrimp species. The majority of extracted microplastics were fiber (100%), black (46%) in color and 1-2.5 mm in size. Polyethylene was identified as the most common polymer type by Fourier transform infrared spectroscopy (FTIR). This study is the first report to evaluate microplastic occurrence and fiber tangles in P. longirostris from northeastern Mediterranean Sea. Results obtained in this study will enhance the understanding of MP pollution among different trophic levels.

Characterization of microfibers emission from textile washing from a domestic environment

Microfibers and microplastics are widely recognized emerging pollutants, which have the potential to cause an Eco-toxicological effect. Cellulosic and synthetic fibers are being released almost equally to the environment. Synthetic fibers released were non-biodegradable resulting in a significant negative impact on the environment. In the present study, four different households using fully automated washing machines (2 top-load, 2 front-load) were studied in a domestic laundry environment under real conditions. Laundry effluents were collected and contaminants analysis was carried out. The results estimated that the average emission rate of the four households was 7,453,635 MF/7Kg (FL, H1), 7,375,500 MFs/6Kg (FL, H2), 10,692,255 MFs/7Kg (TL, H3) and 7,589,017 MFs/6.2Kg (TL, H4). Synthetic fiber's emission rate was only about 19 %, and the average length range of microfibers released was found to be in the range of ≤5 μm (48.64 %), and the least amount of emission was found in the >500 μm range (11.49 %).

Study on the Relationship between Textile Microplastics Shedding and Fabric Structure

Microplastics refer to plastic fibers, particles or films less than 5 mm in diameter. Textile microplastics are an important form of microplastics, which can harm the ecological environment and human health. This paper studies the relationship between textile microplastic shedding and fabric structure to reduce microplastics pollution and reduce its impact on humans and the natural environment. Firstly, household washing is simulated by considering the main fabric type, the number of steel balls used in the washing, washing temperature, washing time and other influencing factors. An orthogonal test of the mixing level of the four factors is designed by selecting the fabric type, the number of steel balls used in washing, washing temperature and washing time, and the influencing factors is analyzed, and the best washing scheme is obtained. Then, under optimal washing conditions, the three factors and three levels of orthogonal test are designed to analyze the influence of fabric structure and external factors on the shedding of microplastics by changing the amounts of friction and insolation time. The results show that the microplastics released by knitted fabrics are significantly more under the same washing conditions than that of woven fabrics. Satin fabrics released the most microplastics and plain fabrics the least. In addition, among the external factors, the amount of friction significantly affects the production of microplastics.

Detection, characterization and possible biofragmentation of synthetic microfibers released from domestic laundering wastewater as an emerging source of marine pollution

Synthetic microfibers are universally recognized as an emerging pollutant in all ecosystems. The present investigation focuses on the evaluation and quantification of synthetic microfiber released from domestic laundering wastewater from different regions of Bhubaneswar city of Odisha state of India. The estimated number of microfibers collected from 500 ml of sample varied from 200 to 500 in numbers with an average amount of biomass in the range of 0.4-4 g. The surface morphology of the samples was assessed by Scanning Electron Microscopic analysis which revealed that the fibers were having a length of approximately 10-30 mm and diameter of 10-20 μm. Carbonyl (CO) stretching band at 1711 cm^-1 and Aldehyde (CH) Weak bond at 2917.38 cm^-1 absorption were recorded from Fourier transform infrared spectroscopic analysis. As microfibers released from synthetic apparels are major source of environmental microplastic pollution their precise detection could help in controlling this problem.

Hazardous chemical elements in cleaning cloths, a potential source of microfibres

Although potentially hazardous chemical elements (e.g., Cu, Cr, Pb, Sb, Ti, Zn) have been studied in clothing textiles, their presence in cleaning textiles is unknown. In this study, 48 cleaning cloth products (consisting of 81 individual samples) purchased in Europe, and consisting of synthetic (petroleum-based), semi-synthetic or natural fibres or combinations of these different types, have been analysed for 16 chemical elements by X-ray fluorescence (XRF) spectrometry. Titanium was detected in most cases (median and maximum concentrations ~3700 and 12,400 mg kg^-1, respectively) and Raman microspectroscopy revealed that TiO₂ was present as anatase. Barium, Br, Cr, Cu, Fe and Zn were frequently detected over a range of concentrations, reflecting the presence of various additives, and Sb was present at concentrations up to about 200 mg kg^-1 in samples containing polyester as catalytic residue from the polymerisation process. Lead was detected as a contaminant in four samples and at concentrations below 10 mg kg^-1. Overall, the range of the chemical element profiles and concentrations was similar to those for clothing materials published in the literature, suggesting that broadly the same additives, materials and processes are employed to manufacture cloths and clothing textiles. The mechanisms by which potentially hazardous chemical elements are released into the environment with microfibres or mobilised into soluble or nano-particulate forms remain to be explored.

Effects of Machine Washing on the Chromatography Parameters of Polyester Fiber Gel Permeation

Fiber examination is frequently performed in forensics, and gel permeation chromatography (GPC) is one candidate method for discriminating polyester fibers. Here, the effects of machine washing on weight-average molecular weight (M _w), polydispersity index (PDI), and the percentage peak area of cyclic ethylene terephthalate trimer (PPAL) of commercial polyester shirts and manufactured poly(ethylene terephthalate) (PET) yarns were investigated using GPC. GPC was performed using a 1,1,1,3,3,3-hexafluoro-propan-2-ol polymer solubilizer, styrene-divinylbenzene copolymer GPC columns, a chloroform mobile phase, and a 254 nm absorbance monitor. The statistical change in the polyester fibers during machine washing was evaluated by comparing three GPC parameters of the same fiber samples before and after machine washing. Among the commercial polyester shirts examined, the GPC parameters changed significantly after machine washing with a considerable PPAL decrease. In contrast, the GPC parameters of manufactured PET yarns changed significantly with a moderate increase in M _w. This work elucidates the change on GPC parameters of polyester fibers by machine washing.

Seasonal variation and complex analysis of microplastic distribution in different WWTP treatment stages in Lithuania

Industrial wastewater, domestic wastewater, and stormwater are the three entry points for microplastics (MP) in wastewater treatment plants. Extreme weather conditions, such as rising temperatures and heavy rainfall caused by climate change, can alter the rate at which MP enters wastewater treatment plants. In this study, wastewater and sludge samples from different treatment stages were collected during a 12-month sampling campaign (seasonal) to determine the efficiency of a municipal wastewater treatment plant in removing microplastic particles. MP ranging from 20 to 1000 µm were detected and classified by shape, color, size, and chemical composition. All samples contained MP particles, with concentration ranging from 1964 ± 50-2982 ± 54 MP/L in influent to 744 ± 13-1244 ± 21 MP/L in effluent and 91.1 ± 8-61.9 ± 5 MP/g in sludge; 71.6-90.1% identified particles were fragment-type with black, white, and transparent colors. Most of the microplastic particles were removed in the activated sludge tank, while the average removal rate in the wastewater treatment plant was 57%. The total concentration of MP was 27% higher in spring than in other seasons. The most common microplastic particles were polyethylene terephthalate (PET), polystyrene (PS), and polypropylene (PP). These results demonstrate the value of long-term monitoring and MP quantification, which would provide a more accurate estimate of MP pollution from wastewater treatment plants.

Impacts of terrestrial input on the distribution characteristics of microplastics in the East China Sea characterized by chromophoric dissolved organic matter (CDOM) analysis

Large quantities of microplastics are found in the East China Sea (ECS), however, the impacts of complicated terrestrial input on the distribution characteristics of microplastics have not been studied. Hence, we aimed to characterize the microplastic distribution in the ECS combined with the fluorescence characteristics of chromophoric dissolved organic matter (CDOM), a sensitive technique to trace terrestrial substances in seawater. The average microplastic abundance in the surface seawater of ECS was 34.73 ± 4.05 items/m³ and sites in the north ECS had a higher microplastic abundance (55.90 ± 2.47 items/m³) than those in the southern region (11.22 ± 4.01 items/m³), due to its proximity to the Yangtze River estuary and Hangzhou Bay. Polyethylene (PE, 44.2 %) was the most abundant microplastic type in the northern region, whereas polyethylene terephthalate (PET, 28.4 %) had a higher proportion in the south ECS. Besides, sites in the north ECS had a higher diversity index of microplastics, suggesting various sources of microplastic pollution. Interestingly, a stronger correlation with the diversity index was found for protein-like component C3 (R² = 0.56) in northern regions compared to fulvic-like component C1 (R² = 0.32) and humic-like component C2 (R² = 0.28), suggesting the significant impact of anthropogenic discharge. Moreover, no correlation between fluorescence components and microplastic diversity index was found in the south ECS, indicating that CDOM can reflect the impact range of terrestrial input on the distribution characteristics of microplastics. This research might be useful in assessing and reducing the impact of terrestrial input on the distribution characteristics of microplastics in the ECS.

Review on alternatives for the reduction of textile microfibers emission to water

The microplastics (MPs) are considered one of the most threatening pollutants. One of the main concerns is their continuous and cumulative flow to water environments, as they are very difficult to be removed. Microfibers (MFs) are a significant type of MPs, with textile articles as one of the most renowned sources. This review aims to provide the current status of these MFs as pollutants, discussing possible alternatives from the manufacturing until the final disposition of MFs. There are many alternatives to reduce these pollutants from reaching the environment but also gaps that need to be further evaluated and addressed. Besides, it should be noticed that alternatives could be complementary between them. Some viable and non-contaminating solutions to reduce this pollution are currently on the market. Also, one relevant aspect is the final disposition or usage of the retained MFs to avoid them from reaching aquatic environments.

A global review of microplastics in wastewater treatment plants: Understanding their occurrence, fate and impact

Microplastics (MPs) are emerging as a serious environmental concern, with wastewater treatment plants (WWTPs) acting as the main entry routes for MPs into aquatic and terrestrial ecosystems. On a global scale, our literature review found that MP research in WWTPs has only been conducted on 121 WWTPs in 17 countries, with the majority of the work being done in Europe (53%), followed by the United States of America and Canada (24%), Asia (18%), and Australia (5%) in recent years. MPs in WWTPs are primarily derived from Personal Care and Cosmetic Products (PCCPs), which are primarily composed of polyethylene (PE) derivatives. Based on the studies, microfibers (57%) and fragments (47%) are observed to be the most common MP forms in influents and effluents of WWTPs. The chemical characterization of MPs detected in WWTPs, showed the occurrence of polyethylene (PE) (22%), polystyrene (PS) (21%), and polypropylene (13%). Although MP retention/removal efficiencies of different treatment technologies vary from medium to high, deliberations on sludge disposal on agricultural soils containing MPs and MP intrusion into groundwater are required to sustainably regulate MP contaminant transport. Thus, the development of efficient detection methods and understanding their fate are of immense significance for the management of MPs. Despite the fact that ongoing research in MPs and WWTPs has unquestionably improved our understanding, many questions and concerns remain unanswered. In this review, the current status of the detection, occurrence, and impact of MPs in WWTPs across the world are systematically reviewed to prioritize policy-making to recognize the WWTPs as global conduits of MPs.

The Effect of the Physical and Chemical Properties of Synthetic Fabrics on the Release of Microplastics during Washing and Drying

Synthetic fibers released during washing are the primary source of microplastic pollution. Hence, research on reducing the release of microplastic fibers during washing has recently attracted considerable attention. As a result of previous studies, there is a difference in the amount of microplastic emission according to various types of fabrics. To mitigate the release of microplastics, the study of the reason for the difference in the amount of microplastics is needed. Therefore, this study investigated different synthetic fabrics that release microplastics and the physical properties of the fabrics that affect the release of fibers. Three types of fabrics with different chemical compositions were analyzed. The washing and drying processes were improved by focusing on the mechanical factors that affected microplastic release. Furthermore, based on the mass of the collected microplastic fibers, it was found that the chemical compositions of the fabric can affect the microplastics released during washing and drying. This evaluation of physical properties helped to identify the physical factors that affect microplastic release. These results may provide a basis for reducing microplastic fiber types, thereby minimizing unintended environmental pollution.

Acrylic fabrics as a source of microplastics from portable washer and dryer: Impact of washing and drying parameters

Increasing uses of synthetic textiles are now a concerning issue as these synthetic textiles are shedding microfibers during the laundering of the fabrics and are considered as a potential source of microplastics (size <5 mm). In addition, manmade fibers like polyester, acrylic, and nylon represent 60% of the worldwide consumption of textile fibers. The novelty of this study is to assess the releasing trends of microfibers from acrylic fabrics during washing and drying under different conditions from a portable washer and dryer machine. Washing and drying effluents were filtered out which were further quantified with gravimetric analysis to determine the net weight of the released microfibers. Among different washing parameters, the mean length and diameter of the released microfibers were found to be approximately 2411 ± 1500 μm and 18 ± 4 μm, respectively. The results indicate that the release of microfibers increased by 2 and 1.4 times respectively when washing and drying time increased from 30 min to 60 min due to high mechanical stresses and longer rotational forces on the fabrics. The use of detergent during washing also promoted more microfiber release (162.49 ± 44.21 mg/kg) when compared to without detergent (60.22 ± 13.32 mg/kg). Moreover, microfibers were released approximately 1.8 times higher from washing when washed with 40 °C of water than with 20 °C of water. However, subsequent washing and drying cycles showed decreasing patterns of microfiber release as microfiber released 45% and 67% less during the 7th washing and drying cycle, respectively, compared to the 1st cycle. Results of this study would help to understand the releasing patterns of microfibers which can help to improve the existing systems to reduce the microplastic emissions from laundering.

First record of microplastic occurence at the commercial fish from Orontes River

Freshwater environments are more sensitive to anthropogenic influences and usually contain higher concentrations of pollutants than marine environments. Microplastic pollution causes additional stress on freshwater animals; yet, studies evaluating the microplastic occurrence in freshwater biota are still limited. In this study, microplastic occurrence in the gastrointestinal tracts (GIT) and gill of commercial fish species (Prussian carp Carassius gibelio (Bloch, 1782); Abu mullet Planiliza abu (Heckel, 1843); Common carp Cyprinus carpio Linnaeus, 1758; European ell Anguilla Anguilla (Linnaeus, 1758); North African catfish Clarias gariepinus (Burchell, 1822); Goldfish Carassius auratus (Linnaeus, 1758) were reported from Orontes River. MPs abundance in the GIT and gill of six species were found as 5.1 ± 2 MPs fish^-1 and 4.4 ± 2 MPs fish^-1 with an occurrence of 95% and 74%, respectively. The majority of extracted microplastics were fiber, black and less than 1000 μm in size. FTIR analysis determined the main polymer types as polyester (50%), high-density polyethylene (HDPE) (10%), polypropylene (PP) (8%) and polyethylene terephthalate (PET) (5%). High MPs abundance and frequency of occurence indicate the exposure of microplastic pollution in freshwater biota which could threat the health of both individuals and consumers. Results obtained in this study will increase the acknowledgement of MPs pollution in the Orontes River. Also, this study will provide data to the administrators to set up necessary legislations in freshwater ecosystems.

A quantitative and qualitative assessment of microplastics collected at two public beaches along the east and south-east coast of Mauritius

Microplastics had been collected at two sites namely Trou d'eau Douce (TD) and La Cambuse (LC) public beaches, lying in the east coast and south-east coast of Mauritius, respectively, over 6 months from September 2019 to February 2020. The sizes of the latter varied from 180 µm to 4 mm. A higher amount of microplastics collected/6-kg sand sample was recorded at LC. Two-way ANOVA revealed that (1) there was a considerable gap in the variability regarding quantity and size distribution of microplastics on the two beaches. The post-hoc analysis showed that the majority of the microplastics at LC were > 1.40 mm, whereas the smaller plastic fragments < 1.40 mm were more dominant at TD. (2) There was a significant interaction between location and event (p value = 0.025). The post-hoc analysis showed that the torrential rain hitting the island prior to sampling week 7 had decreased the microplastic counts at both TD and LC, but not significantly. Interestingly, the two hurricanes, prior to weeks 8 and 9, had appreciably reduced the microplastic counts at TD and, on the other hand, there was an increase in the amount of microplastics at LC, but not to a significant effect. The chemical nature (qualitative analysis) of microplastics was determined by density flotation and FTIR spectroscopy. Microplastics at TD were exclusively high-density polyethylene (HDPE) in origin, whereas, at LC, microplastics were both HDPE and polypropylene (PP) in origin.

Quantification and morphological characterization of microfibers emitted from textile washing

Microplastics are a subject of growing interest as they are a potential threat for living organisms. Textile microfibers (MFs) are an important microplastics sub-group that have been reported as a major source of microplastics release into the environment. This pollution occurs mainly during the washing of synthetic garments. However, standardized methods to quantify and characterize these MFs are scarce. This study proposes a new analytical protocol to characterize these MFs in number and size by means of filtration techniques, optical and electronic microscopy and automatic image post-processing. This approach was developed and validated on effluents from washing machines produced in different conditions (5 different garments, sequential cycles, and presence or not of detergent). Among the analyzed effluents, it was found that 40 to 75% of microfibers have a length comprised between 50 and 200 μm, with average microfiber diameters ranging from 8 to 17 μm depending on the type of textile. The emission range of microfibers was estimated to be between 220,000 to 2,820,000 microfibers per kg of textile depending on the type of garment and the washing conditions. The counting method developed is adapted to a certain range of textiles, such as 100% polyester fleece jackets (PET-1), 100% smooth polyester T-shirt (PET-2) and 100% acrylic sweater (PAN), and is not affected by the presence of detergent. The proposed method of characterization of these MFs lengths can also be extrapolated to the counting of other objects that have a similar morphology to the analyzed fibers. Hence, it can be helpful to develop new testing capture technologies and, thus, contribute to the enhancement of filtering techniques of several pollutants.

Exposure to textile microfibers causes no effect on blood, behavior and tissue morphology in the three-spined stickleback (Gasterosteus aculeatus)

We assessed textile microfibers impacts on the three-spined stickleback, using synthetic and natural fibers originating from yarns or washer effluents. After water exposure at 200 fibers/L, we assessed fish survival, behavior, tissue morphology and hemoglobin concentration, and paid special attention to exposure characterization. We report quantitative fiber distribution in the exposure system, fiber size distribution, and contamination. We provide a fiber preparation procedure and exposure method intended to ensure accurate and stable concentrations over time. Following exposure, no effect was observed on the studied endpoints in any of the treatment conditions. We observed fast sinking of the fibers. Fish organs and feces contained 1.3% and 6.8% of recovered fibers, and 12.6% fibers were found adhered to the tank walls. We show that water renewals in semi-static exposures is a critical step for the maintenance of stable concentrations, and discuss the practical and/or methodological challenges associated to the study of microfibers.

Wastewater treatment plant effluent and microfiber pollution: focus on industry-specific wastewater

The production, use, and disposal of synthetic textiles potentially release a significant amount of microfibers into the environment. Studies performed on municipal wastewater treatment plants (WWTPs) effluent reported a higher presence of microfibers due to the mix of domestic laundry effluent through sewage. As municipal WWTPs receive influents from households and industries, it serves as a sink for the microfibers. However, research on textile industry WWTPs that primarily treat the textile fabric processing wastewater was not explored with the concern of microfibers. Hence, the review aims to analyze the existing literature and enlighten the impact of WWTPs on microplastic emission into the environment by specifically addressing textile industry WWTPs. The results of the review confirmed that even after 95-99% removal, municipal WWTPs can emit around 160 million microplastics per day into the environment. Microfiber was the dominant shape identified by the review. The average microfiber contamination in the WWTP sludge was estimated as 200 microfibers per gram of sludge. As far as the industry-specific effluents are analyzed, textile wet processing industries effluents contained > 1000 times higher microfibers than municipal WWTP. Despite few existing studies on textile industry effluent, the review demonstrates that, so far, no studies were performed on the sludge obtained from WWTPs that handle textile industry effluents alone. Review results pointed out that more attention should be needed to the textile wastewater research which is addressing the textile wet processing industry WWTPs. Moreover, the sludge released from these WWTPs should be considered as an important source of microfiber as they contain more quantity of microfibers than the effluent, and also, their routes to the environment are huge and easy.

Polyethylene terephthalate microplastic fibers increase the release of extracellular antibiotic resistance genes during sewage sludge anaerobic digestion

Microplastic fibers (MFs), as the most frequently detected microplastic shape in sewage sludge, have posed emerging concern for sludge treatment and disposal. However, the effect of MFs on antibiotic resistance genes (ARGs), especially extracellular ARGs (eARGs) during sludge treatment remains far from explicit. Therefore, this study investigated the potential impact of MFs on eARGs during sludge anaerobic digestion (AD), a commonly used sludge treatment method, through long-term operation. The qPCR results showed that both absolute and relative abundances of eARGs increased with the MFs exposure during sludge AD. The average absolute and relative abundances of eight tested eARGs in the AD reactor with the highest MFs dosage (170 items/gTS) were 1.70 and 2.15 times higher than those in the control AD reactor. The metagenomics results further comfirmed the increase of eARGs abundance during sludge anaerobic digestion after MFs exposure and the enhancement did not show significant selectivity. The identification of the potential hosts of eARGs suggested the host numbers of eARGs also increased with MFs exposure, which may suggest enhanced horizonal transformation as a result of increased eARGs. Further exploring the mechansims showed that the genes involved in type IV secretion system was upregulated after MFs exposure, suggesting the active release of eARGs was enhanced with MFs exposure. In contrast, the MFs may not affect the passive release of eARGs as its impact on cell membrance damage was insignificant. The enhanced eARGs in sludge AD process may further accelerate the transport of ARGs in environment, which should be considered during sludge treatment and disposal.

Environmental contamination by microplastics originating from textiles: Emission, transport, fate and toxicity

Microplastic (MP) pollution has become a global concern in terms of its environmental abundance and potential detrimental effects. Fibrous microplastics (FMPs) released from synthetic textiles are believed to contribute significantly to environmental MP pollution. This review provides an overview of current knowledge relating to the environmental impact of FMPs through a summary and discussion of (1) the concentrations in different environmental compartments including water, soil and air, (2) emission from wastewater treatment plants: via effluent discharges to waters and via sludge to land, (3) environmental transport and fate, and (4) toxicity and associated effects. How the properties of FMPs influence these aspects is discussed and their behaviour is compared to MPs of other shapes. We have summarised the Environmental Concentrations and derived Predicted No-Effect Concentrations for a preliminary risk assessment of FMPs by extrapolating the risk quotient for each respective environmental compartment. The uncertainties surrounding current assessment methods are discussed. In particular we address the need to improve determination of exposure levels and to better characterise the effects of FMPs. We conclude by presenting topics for future studies to address, which will improve our still limited understanding of the interactions between FMPs and the environment.

Disposable tri-layer masks and microfiber pollution - An experimental analysis on dry and wet state emission

The use of masks as a personal protective material is the new normal in the post-pandemic. The higher use of masks triggers immediate disposal of synthetic textile fibers leading to environmental pollution. This research is aimed to analyse the level of mask-related pollution and its impact on microfiber release. Microfiber emission characteristics of the tri-layer nonwoven mask (Polypropylene-based disposable mask) are analysed in the dry and wet stages. The individual layers of the mask and the entire mask are evaluated by subjecting them to static immersion and mechanical agitation against freshwater and seawater in the wet stage. The results of the study showed a higher microfiber shedding at dry state (14,031.97-177,601.58 fibers/mask) than the wet state (2557.65-22,525.89 fibers/mask). The increased fuzz formation in the dry state than the wet state is noted as the main reason. In the case of wet state, when the freshwater and seawater are compared, both in a static and agitated state, seawater degraded the mask highly (3358.03-27,348.9 fibers/mask) than the freshwater (1757.26-17,702.86 fibers/mask). Higher salinity and density of the seawater were noted as influencing parameters over the freshwater. When the results of naturally weathered masks are compared with the new mask, weathered masks released significantly (p < 0.05) higher amount of fibers at the evaluation stages. Similar to the new masks, the weathered masks also showed a higher amount of shedding in the dry state and presence of seawater. When the individual layers of the disposable masks were evaluated, at dry and wet states, all the layers showed a similar shedding (no significant difference between individual layers) in the case of a new mask. Whereas, after weathering, a significant amount of higher shedding (p < 0.05) is noted in the middle layer of the mask followed by the outer and inner layer. The difference in fiber composition is noted as the main reason for the strength difference of the nonwoven structure. Statistical analysis confirmed the significant impact of the natural weathering process and seawater on the microfiber shedding.

Microplastics in Wastewater by Washing Polyester Fabrics

Microplastics have become one of the most serious environmental hazards today, raising fears that concentrations will continue to rise even further in the near future. Micro/nanoparticles are formed when plastic breaks down into tiny fragments due to mechanical or photochemical processes. Microplastics are everywhere, and they have a strong tendency to interact with the ecosystem, putting biogenic fauna and flora at risk. Polyester (PET) and polyamide (PA) are two of the most important synthetic fibres, accounting for about 60% of the total world fibre production. Synthetic fabrics are now widely used for clothing, carpets, and a variety of other products. During the manufacturing or cleaning process, synthetic textiles have the potential to release microplastics into the environment. The focus of this paper is to explore the main potential sources of microplastic pollution in the environment, providing an overview of washable polyester materials.

Microplastic occurrence in the gastrointestinal tract and gill of bioindicator fish species in the northeastern Mediterranean

Microplastic pollution is an extremely emerging problem and its potential threats to the aquatic organisms were investigated worldwide. In this study, four different commercial fish species (Mullus barbatus (Linnaeus, 1758), Mullus surmuletus (Linnaeus, 1758), Mugil cephalus (Linnaeus, 1758), Saurida undosquamis (Richardson, 1848)) were used as a bioindicator to assess the microplastic pollution in the northeastern Mediterranean. The frequency of occurrence in the gastrointestinal tract (GIT) and gill was varied between 66-100% and 68-90%, respectively. The highest microplastic abundance was detected at the GIT of M. cephalus sampled from Asi River estuary. The majority of extracted microplastics were fiber, black in color and less than 1 mm in size. Fourier Transform Infrared Spectroscopy (FTIR) indicated the most common polymer type as polyethylene. This study is the first study examining the microplastic existence in gill and results obtained in this study improve the knowledge about the relationship of microplastic ingestion in fish and environmental conditions in the Northeastern Mediterranean Sea.