Oxidation Kinetics of Bromophenols by Nonradical Activation of Peroxydisulfate in the Presence of Carbon Nanotube and Formation of Brominated Polymeric Products

Atomic-Level Engineered Cobalt Catalysts for Fenton-Like Reactions: Synergy of Single Atom Metal Sites and Nonmetal-Bonded Functionalities

Single atom catalysts (SACs) are atomic-level-engineered materials with high intrinsic activity. Catalytic centers of SACs are typically the transition metal (TM)-nonmetal coordination sites, while the functions of coexisting non-TM-bonded functionalities are usually overlooked in catalysis. Herein, the scalable preparation of carbon-supported cobalt-anchored SACs (CoCN) with controlled Co─N sites and free functional N species is reported. The role of metal- and nonmetal-bonded functionalities in the SACs for peroxymonosulfate (PMS)-driven Fenton-like reactions is first systematically studied, revealing their contribution to performance improvement and pathway steering. Experiments and computations demonstrate that the Co─N3C coordination plays a vital role in the formation of a surface-confined PMS* complex to trigger the electron transfer pathway and promote kinetics because of the optimized electronic state of Co centers, while the nonmetal-coordinated graphitic N sites act as preferable pollutant adsorption sites and additional PMS activation sites to accelerate electron transfer. Synergistically, CoCN exhibits ultrahigh activity in PMS activation for p-hydroxybenzoic acid oxidation, achieving complete degradation within 10 min with an ultrahigh turnover frequency of 0.38 min-1, surpassing most reported materials. These findings offer new insights into the versatile functions of N species in SACs and inspire rational design of high-performance catalysts in complicated heterogeneous systems.

Direct Electron Transfer-Driven Nontoxic Oligomeric Deposition of Sulfonamide Antibiotics onto Carbon Materials for In Situ Water Remediation

The rising in situ chemical oxidation (ISCO) technologies based on polymerization reactions have advanced the removal of emerging contaminants in the aquatic environment. However, despite their promise, uncertainties persist regarding their effectiveness in eliminating structurally complex contaminants, such as sulfonamide antibiotics (SAs). This study elucidated that oligomerization, rather than mineralization, predominantly governs the removal of SAs in the carbon materials/periodate system. The amine groups in SAs played a crucial role in forming organic radicals and subsequent coupling reactions due to their high f- index and low bond orders. Moreover, the study highlighted the robust adhesion of oligomers to the catalyst surface, facilitated by enhanced van der Waals forces and hydrophobic interactions. Importantly, plant and animal toxicity assessments confirmed the nontoxic nature of oligomers deposited on the carbon material surface, affirming the efficacy of carbon material-based ISCO in treating contaminated surface water and groundwater. Additionally, a novel classification approach, Δlog k, was proposed to differentiate SAs based on their kinetic control steps, providing deeper insights into the quantitative structure-activity relationship (QSAR) and facilitating the selection of optimal descriptors during the oligomerization processes. Overall, these insights significantly enhance our understanding of SAs removal via oligomerization and demonstrate the superiority of C-ISCO based on polymerization in water decontamination.

Size-Dependent Catalysis in Fenton-like Chemistry: From Nanoparticles to Single Atoms

State-of-the-art Fenton-like reactions are crucial in advanced oxidation processes (AOPs) for water purification. This review explores the latest advancements in heterogeneous metal-based catalysts within AOPs, covering nanoparticles (NPs), single-atom catalysts (SACs), and ultra-small atom clusters. A distinct connection between the physical properties of these catalysts, such as size, degree of unsaturation, electronic structure, and oxidation state, and their impacts on catalytic behavior and efficacy in Fenton-like reactions. In-depth comparative analysis of metal NPs and SACs is conducted focusing on how particle size variations and metal-support interactions affect oxidation species and pathways. The review highlights the cutting-edge characterization techniques and theoretical calculations, indispensable for deciphering the complex electronic and structural characteristics of active sites in downsized metal particles. Additionally, the review underscores innovative strategies for immobilizing these catalysts onto membrane surfaces, offering a solution to the inherent challenges of powdered catalysts. Recent advances in pilot-scale or engineering applications of Fenton-like-based devices are also summarized for the first time. The paper concludes by charting new research directions, emphasizing advanced catalyst design, precise identification of reactive oxygen species, and in-depth mechanistic studies. These efforts aim to enhance the application potential of nanotechnology-based AOPs in real-world wastewater treatment.

Were Persulfate-Based Advanced Oxidation Processes Really Understood? Basic Concepts, Cognitive Biases, and Experimental Details

Persulfate (PS)-based advanced oxidation processes (AOPs) for pollutant removal have attracted extensive interest, but some controversies about the identification of reactive species were usually observed. This critical review aims to comprehensively introduce basic concepts and rectify cognitive biases and appeals to pay more attention to experimental details in PS-AOPs, so as to accurately explore reaction mechanisms. The review scientifically summarizes the character, generation, and identification of different reactive species. It then highlights the complexities about the analysis of electron paramagnetic resonance, the uncertainties about the use of probes and scavengers, and the necessities about the determination of scavenger concentration. The importance of the choice of buffer solution, operating mode, terminator, and filter membrane is also emphasized. Finally, we discuss current challenges and future perspectives to alleviate the misinterpretations toward reactive species and reaction mechanisms in PS-AOPs.

Homogenous Oxidizing Oligomerization Coupled with Coagulation for Water Purification

Natural manganese oxides could induce the intermolecular coupling reactions among small-molecule organics in aqueous environments, which is one of the fundamental processes contributing to natural humification. These processes could be simulated to design novel advanced oxidation technology for water purification. In this study, periodate (PI) was selected as the supplementary electron-acceptor for colloidal manganese oxides (Mn(IV)aq) to remove phenolic contaminants from water. By introducing polyferric sulfate (PFS) into the Mn(IV)aq/PI system and exploiting the flocculation potential of Mn(IV)aq, a post-coagulation process was triggered to eliminate soluble manganese after oxidation. Under acidic conditions, periodate exists in the H4IO6- form as an octahedral oxyacid capable of coordinating with Mn(IV)aq to form bidentate complexes or oligomers (Mn(IV)-PI*) as reactive oxidants. The Mn(IV)-PI* complex could induce cross-coupling process between phenolic contaminants, resulting in the formation of oligomerized products ranging from dimers to hexamers. These oligomerized products participate in the coagulation process and become stored within the nascent floc due to their catenulate nature and strong hydrophobicity. Through coordination between Mn(IV)aq and H4IO6-, residual periodate is firmly connected with manganese oxides in the floc after coagulation and could be simultaneously separated from the aqueous phase. This study achieves oxidizing oligomerization through a homogeneous process under mild conditions without additional energy input or heterogeneous catalyst preparation. Compared to traditional mineralization-driven oxidation techniques, the proposed novel cascade processes realize transformation, convergence, and separation of phenolic contaminants with high oxidant utilization efficiency for low-carbon purification.

Oxidative polymerization versus degradation of organic pollutants in heterogeneous catalytic persulfate chemistry

Catalytic polymerization pathways in advanced oxidation processes (AOPs) have recently drawn much attention for organic pollutant elimination owing to the rapid removal kinetics, high selectivity, and recovery of organic carbon from wastewater. This work presents a review on the polymerization regimes in AOPs and their applications in wastewater decontamination. The review mainly highlights three critical issues in polymerization reactions induced by persulfate activation (Poly-PS-AOPs), including heterogeneous catalysts, persulfate activation pathways, and properties of organic substrates. The dominant influencing factors on the selection of catalysts, activation regimes of reactive oxygen species, and polymerization processes of organic substrates are discussed in detail. Moreover, we systematically demonstrate the merits and challenges of Poly-PS-AOPs upon pollutant degradation and polymer synthesis. We particularly highlight that Poly-PS-AOPs technology could be promising in the treatment of industrial wastewater containing heterocyclic organics and the synthesis of polymers and polymer-functionalized materials for advanced environmental and energy applications.

Origins of Selective Oxidation in Carbon-Based Nonradical Oxidation Processes toward Organic Pollutants: Quantitative Structure-Activity Relationships (QSARs)

Metal-free carbon material-mediated nonradical oxidation processes (C-NOPs) have emerged as a research hotspot due to their excellent performance in selectively eliminating organic pollutants in aqueous environments. However, the selective oxidation mechanisms of C-NOPs remain obscure due to the diversity of organic pollutants and nonradical active species. Herein, quantitative structure-activity relationship (QSAR) models were employed to unveil the origins of C-NOP selectivity toward organic pollutants in different oxidant systems. QSAR analysis based on adsorption and oxidation descriptors revealed that C-NOP selectivity depends on the oxidation potentials of organic pollutants rather than on adsorption interactions. However, the dominance of electronic effects in selective oxidation decreases with increasing structural complexity of organic pollutants. Moreover, the oxidation threshold solely depends on the inherent electronic nature of organic pollutants and not on the reactivity of nonradical active species. Notably, the accuracy of substituent descriptors (Hammett constants) and theoretical descriptors (e.g., highest occupied molecular orbital energy, ionization potential, and single-electron oxidation potential) is significantly influenced by the complexity and molecular state of organic pollutants. Overall, the study findings reveal the origins of organic pollutant-oriented selective oxidation and provide insight into the application of descriptors in QSAR analysis.

Mineralization versus polymerization pathways in heterogeneous Fenton-like reactions

Fenton reaction has been widespread application in water purification due to the excellent oxidation performances. However, the poor cycle efficiency of Fe(III)/Fe(II) is one of the biggest bottlenecks. In this study, graphite (GP) was used as a green carbon catalyst to accelerate Fenton-like (H2O2/Fe3+ and persulfate/Fe3+) reactions by promoting ferric ion reduction and intensifying diverse peroxide activation pathways. Significantly, the carboxyl group on GP anchors iron ions to form GP-COOFe(III) which promote persulfate adsorption to form surface complexes and induce an electron transfer pathway (ETP). While the electron-rich hydroxyl and carbonyl groups will combine to from GP-COFe(II), a reductive intermediate to activate peroxide to generate free radicals (from H2O2 and PDS) or high-value iron [Fe(IV)] (from PMS). Consequently, different pathways lead to distinct degree of oxidation: i) radicals in H2O2/Fe3+/GP prefer to mineralize bisphenol A (BPA) with no selectivity; ii) Fe(IV) in PMS/Fe3+/GP partially oxidizes BPA but cannot open the aromatic ring; iii) ETP in PMS/ or PDS/Fe3+/GP drives coupling reactions to form polymeric products covered on catalyst surface. Thus, rational engineering surface functionality of graphite and selecting proper peroxides can realize on-demand selectivity and oxidation capacity in Fenton-like systems.

Electron Delocalization Realizes Speedy Fenton-Like Catalysis over a High-Loading and Low-Valence Zinc Single-Atom Catalyst

A zinc (Zn)-based single-atom catalyst (SAC) is recently reported as an active Fenton-like catalyst; however, the low Zn loading greatly restricts its catalytic activity. Herein, a molecule-confined pyrolysis method is demonstrated to evidently increase the Zn loading to 11.54 wt.% for a Zn SAC (ZnSA -N-C) containing a mixture of Zn-N4 and Zn-N3 coordination structures. The latter unsaturated Zn-N3 sites promote electron delocalization to lower the average valence state of Zn in the mix-coordinated Zn-Nx moiety conducive to interaction of ZnSA -N-C with peroxydisulfate (PDS). A speedy Fenton-like catalysis is thus realized by the high-loading and low-valence ZnSA -N-C for PDS activation with a specific activity up to 0.11 min L-1 m-2 , outstripping most Fenton-like SACs. Experimental results reveal that the formation of ZnSA -N-C-PDS* complex owing to the strong affinity of ZnSA -N-C to PDS empowers intense direct electron transfer from the electron-rich pollutant toward this complex, dominating the rapid bisphenol A (BPA) elimination. The electron transfer pathway benefits the desirable environmental robustness of the ZnSA -N-C/PDS system for actual water decontamination. This work represents a new class of efficient and durable Fenton-like SACs for potential practical environmental applications.

Redox-directed identification of toxic transformation products during ozonation of aromatics

The toxicity assessment of transformation products (TPs) formed in oxidative water treatment is crucial but challenging because of their low concentration, structural diversity, and mixture complexity. Here, this study developed a novel redox-directed approach for identification of toxic TPs without the individual toxicity and concentration information. This approach based on sodium borohydride reduction comprised an integrated process of toxicological evaluation, fluorescence excitation-emission matrix characterization, high-resolution mass spectrometry detection, followed by ecological toxicity assessment of identified TPs. The redox-directed identification of primary causative toxicants was experimentally tested for the increased nonspecific toxicity observations in the ozonated effluents of model aromatics. Reduction reaction caused a remarkable decrease in toxicity and increase in fluorescence intensity, obtaining a good linear relation between them. More than ten monomeric or dimeric p-benzoquinone (p-BQ) TPs were identified in the ozonated effluents. The occurrence of the p-BQ TPs was further verified through parallel sodium sulfite reduction and actual wastewater ozonation experiments. In vitro bioassays of luminescent bacteria, as well as in silico genotoxicity and cytotoxicity predictions, indicate that the toxicity of p-BQ TPs is significantly higher than that of their precursors and other TPs. These together demonstrated that the identified p-BQ TPs are primary toxicity contributors. The redox-directed approach facilitated the revelation of primary toxicity contribution, illustrating emerging p-BQs are a concern for aquatic ecosystem safety in the oxidative treatment of aromatics-contaminated wastewater.

Insights into Enhanced Peroxydisulfate Activation with B and Fe Co-Doped Biochar from Bark for the Rapid Degradation of Guaiacol

A boron and iron co-doped biochar (B-Fe/biochar) from Masson pine bark was fabricated and used to activate peroxydisulfate (PDS) for the degradation of guaiacol (GL). The roles of the dopants and the contribution of the radical and non-radical oxidations were investigated. The results showed that the doping of boron and iron significantly improved the catalytic activity of the biochar catalyst with a GL removal efficiency of 98.30% within 30 min. The degradation of the GL mainly occurred through the generation of hydroxyl radicals (·OHs) and electron transfer on the biochar surface, and a non-radical degradation pathway dominated by direct electron transfer was proposed. Recycling the B-Fe/biochar showed low metal leaching from the catalyst and satisfactory long-term stability and reusability, providing potential insights into the use of metal and non-metal co-doped biochar catalysts for PDS activation.

Modulation of radical and nonradical pathways via modified carbon nanotubes toward efficient oxidation of binary pollutants in water

In order to minimize the knowledge gap between single and binary pollutants degradation by persulfate-based advanced oxidation processes (PS-AOPs), iron-loaded N-doped carbon nanotubes (Fe-NCNT) and its acid-washing sample (Fe-NCNT-W) were synthesized as peroxymonosulfate (PMS) activator for simultaneous oxidation of acid orange 7 (AO7) and electron-rich (phenol/ibuprofen) or electron-deficient pollutants (nitrobenzene/benzoic acid). Mechanistic studies revealed that both radical (HO•, SO4•-) and nonradical (electron-transfer, high-valent iron) pathways involved for organic oxidation in Fe-NCNT/PMS system, while electron-transfer pathway (ETP) and high-valent iron-oxo species accounted for pollutant degradation at the surface and inner space of Fe-NCNT-W, respectively. The oxidation performances in single or binary systems were systematically investigated. In comparison to benchmark radical-based (Fe2+/PMS), nonradical ETP (NCNT/PMS) and mixed (Fe-NCNT/PMS) systems, Fe-NCNT-W/PMS outperformed superior performance toward oxidation of binary pollutants with little inference from solution pH or background substances, which could also be fabricated into membrane reactor for actual dyeing sewage treatment. Such superiorities should be mainly ascribed to the particular selectivity and intensive treatment of nonradical pathways in Fe-NCNT-W/PMS system with nanoconfinement effect. This work affords novel insights into the treatment of combined pollution via PMS activation by engineered nanomaterials.

Merits and Limitations of Radical vs. Nonradical Pathways in Persulfate-Based Advanced Oxidation Processes

Urbanization and industrialization have exerted significant adverse effects on water quality, resulting in a growing need for reliable and eco-friendly treatment technologies. Persulfate (PS)-based advanced oxidation processes (AOPs) are emerging as viable technologies to treat challenging industrial wastewaters or remediate groundwater impacted by hazardous wastes. While the generated reactive species can degrade a variety of priority organic contaminants through radical and nonradical pathways, there is a lack of systematic and in-depth comparison of these pathways for practical implementation in different treatment scenarios. Our comparative analysis of reaction rate constants for radical vs. nonradical species indicates that radical-based AOPs may achieve high removal efficiency of organic contaminants with relatively short contact time. Nonradical AOPs feature advantages with minimal water matrix interference for complex wastewater treatments. Nonradical species (e.g., singlet oxygen, high-valent metals, and surface activated PS) preferentially react with contaminants bearing electron-donating groups, allowing enhancement of degradation efficiency of known target contaminants. For byproduct formation, analytical limitations and computational chemistry applications are also considered. Finally, we propose a holistically estimated electrical energy per order of reaction (EE/O) parameter and show significantly higher energy requirements for the nonradical pathways. Overall, these critical comparisons help prioritize basic research on PS-based AOPs and inform the merits and limitations of system-specific applications.

Materials Based on Co, Cu, and Cr as Activators of PMS for Degrading a Representative Antibiotic-The Strategy for Utilization in Water Treatment and Warnings on Metal Leaching

A chromate of copper and cobalt (Φy) was synthesized and characterized. Φy activated peroxymonosulfate (PMS) to degrade ciprofloxacin (CIP) in water. The Φy/PMS combination showed a high degrading capability toward CIP (~100% elimination in 15 min). However, Φy leached cobalt (1.6 mg L^-1), limiting its use for water treatment. To avoid leaching, Φy was calcinated, forming a mixed metal oxide (MMO). In the combination of MMO/PMS, no metals leached, the CIP adsorption was low (<20%), and the action of SO₄•^- dominated, leading to a synergistic effect on pollutant elimination (>95% after 15 min of treatment). MMO/PMS promoted the opening and oxidation of the piperazyl ring, plus the hydroxylation of the quinolone moiety on CIP, which potentially decreased the biological activity. After three reuse cycles, the MMO still presented with a high activation of PMS toward CIP degradation (90% in 15 min of action). Additionally, the CIP degradation by the MMO/PMS system in simulated hospital wastewater was close to that obtained in distilled water. This work provides relevant information on the stability of Co-, Cu-, and Cr-based materials under interaction with PMS and the strategies to obtain a proper catalyst to degrade CIP.

Comparative studies of transformation behaviors and mechanisms of halophenols in multiple chemical oxidative systems

Due to wide applications, halophenols (HPs), especially bromophenols, chlorophenols, and fluorophenols, are commonly detected but resistant to biological removal in wastewater treatment plants (WWTPs). This study investigated the overall transformation behaviors of three representative HPs (2,4-dichlorophenol: 24-DCP, 2,4-dibromophenol: 24-DBP, 2,4-difluorophenol: 24-DFP) in six chemical oxidative systems (KMnO₄, K₂FeO₄, NaClO, O₃, UV, and persulfate (PS)). The results revealed fast removal of selected HPs by O₃, PS and K₂FeO₄, while a large discrepancy in their removal efficiencies occurred under UV irradiation, KMnO₄ oxidation and particularly chlorination. Based on the analysis of the identified intermediates and products, coupling among the five routes was the general route, and dimers were the main intermediates for HP oxidation. The effect of the halogen atom on the transformation pathways of HPs was highly reaction type dependent. Among the six chemical treatments, PS could induce HPs to yield relatively low-molecular-weight polymers and obtain the highest coupling degree. Transition state (TS) calculations showed that the H atom linked to the phenoxy group of HPs was the most easily abstracted by hydroxyl radicals to form the coupling precursor, i.e., phenoxy radicals. This high coupling behavior further resulted in the increased toxicity to green algae. Characterization revealed that HP reaction solutions treated with PS had a severely negative effect on algae growth, photosynthetic pigment synthesis, and the antioxidant enzyme system. These findings can shed light on the reaction mechanisms of advanced oxidation technologies and some risk management and control of PS technique may be considered when treating phenolic pollutants.

Probing the activation mechanism of nitrogen-doped carbonaceous materials for persulfates: Based on the differences between peroxymonosulfate and peroxydisulfate

The activation processes of persulfates by metal-free nitrogen-doped carbonaceous material (NCM) remain unclear due to their complex structures and heterogeneous nature. On the other hand, from the perspective of persulfates, it is possible to clarify the reaction between persulfates and NCM by considering the differences in activation behaviors between peroxymonosulfate (PMS) and peroxydisulfate (PDS). Our study aims to compare the differences between NCM-PDS and NCM-PMS using a fully metal-free NCM as a model catalyst. Firstly, NCM-PDS was more efficient than NCM-PMS in degrading phenolic compounds (PCs). Secondly, the stoichiometric ratio between consumed persulfates and DCP removed in the NCM-PDS (0.73) is lower than in the NCM-PMS (1.08). Thirdly, PMS and PDS adsorb on NCM in different ways, suggesting that the peak O-O bond in PDS has blue shifted from 814 cm^-1 to 805 cm^-1, while that of O-O bond in PMS has shifted from 889 cm^-1 to 834 cm^-1. Additionally, the hydrogen bond between the phenolic group and oxidants plays a critical role in PCs degradation by NCM-PDS, exhibiting a stronger pH effect and higher kinetic isotope effects (KIEs) than NCM-PMS. A proton-coupled electron transfer process has been proposed for PCs degradation using NCM-PDS, and a scheme of reaction pathways has been provided for the NCM-PMS/PDS-PCs system. The study results provide a deeper understanding of the activation of persulfates by NCM, as well as a strategy for selecting oxidants.

Chrome shaving-derived biochar as efficient persulfate activator: Ti-induced charge distribution modulation for 1O2 dominated nonradical process

Efficient degradation of organic contaminants by oxidative radicals remains a challenge due to invalid consumption of radicals and easy generation of secondary halogenated pollutants. In this work, an efficient and recyclable bimetallic biochar (Cr-Ti/BC) was developed through peroxydisulfate (PDS) activation via nonradical pathway for sulfamethoxazole (SMX) degradation. The Cr-Ti/BC exhibited excellent catalytic activity for 99.9 % of SMX removal with a high k_obs of 0.13 min^-1, and negligible inhibitory effects were observed under various pH condition. The activation mechanisms were (i) metastable reactive intermediates (Cr-Ti/BC-PDS) formation via an interaction between Cr-Ti/BC and PDS on the active defective sites (e.g., OH/COC, COOH, CO, nitric oxides, graphitic N, and pyridinic N), and (ii) ¹O₂ generation through electron transfer between Cr-Ti/BC-PDS intermediates and dissolved oxygen. The high reusability and strong stability of Cr-Ti/BC also verified the outstanding advantage of the Cr-Ti/BC during practical application. This study not only is the first study the catalytic performance of Cr and Ti co-doped biochar for PDS activation, but also successfully provides a promising strategy to induce a nonradical pathway for PDS activation, which is of great significance for the subsequent method design, and thus paving the path for exploiting advanced oxidation systems in practical application for organic contaminant removal toward polluted site remediation.

Generation of FeIV =O and its Contribution to Fenton-Like Reactions on a Single-Atom Iron-N-C Catalyst

Generating Fe^IV =O on single-atom catalysts by Fenton-like reaction has been established for water treatment; however, the Fe^IV =O generation pathway and oxidation behavior remain obscure. Employing an Fe-N-C catalyst with a typical Fe-N₄ moiety to activate peroxymonosulfate (PMS), we demonstrate that generating Fe^IV =O is mediated by an Fe-N-C-PMS* complex-a well-recognized nonradical species for induction of electron-transfer oxidation-and we determined that adjacent Fe sites with a specific Fe₁ -Fe₁ distance are required. After the Fe atoms with an Fe₁ -Fe₁ distance <4 Å are PMS-saturated, Fe-N-C-PMS* formed on Fe sites with an Fe₁ -Fe₁ distance of 4-5 Å can coordinate with the adjacent Fe^II -N₄ , forming an inter-complex with enhanced charge transfer to produce Fe^IV =O. Fe^IV =O enables the Fenton-like system to efficiently oxidize various pollutants in a substrate-specific, pH-tolerant, and sustainable manner, where its prominent contribution manifests for pollutants with higher one-electron oxidation potential.

Electron-transfer-based peroxymonosulfate activation on defect-rich carbon nanotubes: Understanding the substituent effect on the selective oxidation of phenols

Nanocarbon-based persulfate oxidation technologies are promising for green elimination of phenolic pollutants. Previous studies revealed the electron transfer via defective carbon nanotube (CNTs) for selective oxidation of various phenols. However, an underlying relationship between the molecular structure of phenols and the selectivity of electron transfer-induced oxidation has not been well understood. Herein, we report that defect-rich CNTs could initiate electron-transfer regime from phenols to peroxymonosulfate (PMS), resulting in the efficient degradation of phenols. Further studies uncover a distinctive substituent group-dependent selective oxidation of phenols via the CNT-mediated electron transfer process. Specifically, the degradation rate of para-substituted phenols with electron-donating groups (e.g., -NH₂ and -OCH₃) is faster than those with electron-withdrawing groups (e.g., -NO₂ and -COOH). For a kind of substituted phenols, the substituent position has a great influence on the phenols degradation and their degradation rates follow this sequence: para > ortho > meta -position. Besides, increasing the number of the substituent group can accelerate the degradation of substituted phenols. This study elucidates the substituent effect on the electron transfer-dominated selective oxidation of phenols for the first time, which guides the application of carbon/persulfate system for the targeted remediation of phenols-polluted wastewater.

Regulation of defects and nitrogen species on carbon nanotube by plasma-etching for peroxymonosulfate activation: Inducing non-radical/radical oxidation of organic contaminants

The structural defects and heteroatom dopants of carbonaceous materials play critical roles in their activation of peroxymonosulfate (PMS) for organic pollutants' removal. This study uses plasma-etching technology to control the levels of structural defects and nitrogen species in nitrogen-doped carbon nanotubes (N-CNTs) for excellent PMS activation. The vacancy defects, CO, pyrrolic N and graphitic N could be rationally designed by controlling the plasma-etching time. Obviously, the I_D/I_G (from 0.56 to 0.94) and CO contents (from 0.07 to 0.44 at%) of N-CNTs increase with rising etching time, exhibiting good linear positive correlations with phenol oxidation rates. Furthermore, through active species identification, quantitative structure-activity relationships analysis and theoretical calculations, vacancy defects (adsorbing PMS O1 site) and CO are confirmed to be the active sites for the generation of ¹O₂, which is major pathway (82%) for phenol degradation. While radicals induced by pyrrolic N and graphitic N adsorbing PMS O2 site are the minor pathway (18%). Overall, this study sheds new light on the crucial roles of defects and N species in inducing PMS non-radical/radical activation by carbocatalyst via efficiently controlled plasma-etching technology.

Electro-Induced Carbon Nanotube Discrete Electrodes for Sustainable Persulfate Activation

In electrochemical advanced oxidation processes (EAOPs), the rate-limiting step is the mass transfer of pollutants to the electrodes due to the limited active surface areas. To this end, we established a three-dimensional (3D) EAOP system by coupling conventional graphite electrodes with dispersed carbon nanotubes (CNTs). The electrodes (particularly the anode) induced electric field spontaneously polarized CNTs into dispersed reactive particle electrodes (CNT-PEs) in the solution, which remarkably promoted electrochemical activation of peroxydisulfate (PDS) to generate surface CNT-PDS* complexes and surface-bound radicals (SBRs). Based on the excited potential (E_CNT-PEs) at different positions in the 3D electric field, CNT-PEs were activated into three states. (i) E_CNT-PEs < E_organic, CNT-PEs are chemically inert toward DCP oxidation; (ii) E_organic < E_CNT-PEs < E_water, CNT-PEs will oxidize DCP via an electron-transfer process (ETP); (iii) E_CNT-PEs > E_water, both CNT-PDS* complexes and the anode will oxidize water to produce SBRs. Thus, DCP could be oxidized by CNT-PDS* complexes via ETP to form polychlorophenols on the CNT surface, causing rapid deactivation of the micro-electrodes. In contrast, SBRs attack DCP directly into chloride ions and hydroxylated products, maintaining the surface cleanliness and activity of CNT-PEs for long-term operations.

Multimetallic CuCoNi Oxide Nanowires In Situ Grown on a Nickel Foam Substrate Catalyze Persulfate Activation via Mediating Electron Transfer

In situ growth of nanostructures on substrates is a strategy for designing highly efficient catalytic materials. Herein, multimetallic CuCoNi oxide nanowires are synthesized in situ on a three-dimensional nickel foam (NF) substrate (CuCoNi-NF) by a hydrothermal method and applied to peroxydisulfate (PDS) activation as immobilized catalysts. The catalytic performance of CuCoNi-NF is evaluated through the degradation of organic pollutants such as bisphenol A (BPA) and practical wastewater. The results indicate that the NF not only plays an important role as the substrate support but also serves as an internal Ni source for material fabrication. CuCoNi-NF exhibits high activity and stability during PDS activation as it mediates electron transfer from BPA to PDS. CuCoNi-NF first donates electrons to PDS to arrive at an oxidized state and subsequently deprives electrons from BPA to return to the initial state. CuCoNi-NF maintains high catalytic activity in the pH range of 5.2-9.2, adapts to a high ionic strength up to 100 mM, and resists background HCO₃^- and humic acid. Meanwhile, 76.6% of the total organic carbon can be removed from packaging wastewater by CuCoNi-NF-catalyzed PDS activation. This immobilized catalyst shows promising potential in wastewater treatment, well addressing the separation and recovery of conventional powdered catalysts.

Peroxydisulfate activation by nano zero-valent iron graphitized carbon materials for ciprofloxacin removal: Effects and mechanism

Since the discovery of the potential hazards of ciprofloxacin (CIP) to the ecosystem and human health, there has been an urgent need to develop effective technologies to solve the severe issue. In this work, the nanozero-valent iron graphitized carbon matrix (xFe@CS-T_m) were prepared via a hydrothermal method to activate peroxydisulfate (PDS) for degradation of CIP. Specifically, 0.5Fe@CS-T₇ exhibited the excellent catalytic performance for PDS activation to degrade CIP. Moreover, the catalyst exhibited vigorous interference resistance at various pH values, in the presence of various inorganic anions and under humic acid conditions. The characterization results demonstrated that Fe was successfully embedded on the carbon matrix and became the active sites to promote ROS production. It is demonstrated that O₂^•- was the main active species rather than •OH and SO₄^•-, based on quench trapping, EPR experiments and steady state concentrations calculations. The possible pathways of CIP degradation were proposed using LC-MS results and density functional theory. The outcomes of the toxicity estimation software tool found that the toxicity of CIP was reduced. This study not only investigated a novel methodology for the degradation of antibiotic wastewater but also provides a feasible pathway for carbon-neutral wastewater treatment.

Degradation of tetracycline by activating persulfate using biochar-based CuFe2O4 composite

Biochar derived from Lentinus edodes (LBC) and CuFe₂O₄ (CuFe₂O₄@LBC) composites were prepared by the hydrothermal method, and were applied to activate persulfate (PDS) for degrading tetracycline (TC) in a wide pH range. The CuFe₂O₄@LBC composites were characterized by XRD, FTIR, SEM, and XPS. LBC-derived biochars greatly reduced the aggregation of CuFe₂O₄ particles and enhanced the catalytic performance of CuFe₂O₄. CuFe₂O₄@LBC catalyst could remove 85% of tetracycline within 100 min under visible light. In addition, the removal rate of TC reached 76% after five cycles, indicating that the composite had good stability and reusability. Simple classical quenching experiments suggested that the degradation of TC could be mainly attributed to •OH and •S [Formula: see text].

Nonradical electron transfer-based peroxydisulfate activation by a Mn-Fe bimetallic oxide derived from spent alkaline battery for the oxidation of bisphenol A

Mn-Fe bimetallic oxide has been employed as an outstanding peroxydisulfate (PDS) activator, but the underlying mechanism is still controversial. In this work, Mn_0.27FeO_4.55 (MFBO) was synthesized using the recovered waste alkaline battery and its catalytic activity and mechanism for PDS activation were explored in detail. Results show that MFBO exhibited a higher catalytic activity than the individual single metal oxides (FeO_x and Mn₂O₃) due to the synergistic effect between Fe and Mn elements. The removal efficiency of bisphenol A (BPA) with an initial concentration of 10 mg/L reached 97.8% within 90 min in the presence of 0.5 g/L MFBO and 2.0 mM PDS. Moreover, the MFBO maintained high stability and reusability even after being recycled for five times. With the aid of a series of experiments and ex-situ/in-situ characterizations, a non-radical PDS activation mechanism was proposed, in which organic contaminants would be oxidized through a direct electron transfer pathway mediated by the metastable reactive complexes (MFBO-PDS*). Notably, the MFBO/PDS system revealed selective oxidation towards different organic pollutants and the reaction rates were closely related to their structures and properties. The research provided an effective alternation process for application of the waste battery, as well as developed a novel perspective for removal of recalcitrant aqueous contaminants through a nonradical mechanism.

Origin of the Excellent Activity and Selectivity of a Single-Atom Copper Catalyst with Unsaturated Cu-N2 Sites via Peroxydisulfate Activation: Cu(III) as a Dominant Oxidizing Species

As an efficient active oxidant for the selective degradation of pollutants in wastewater, the high-valent copper species Cu(III) with persulfate activation has attracted substantial attention in some Cu-based catalysts. However, the systematic study of a catalyst structure and mechanism about Cu(III) with peroxydisulfate (PDS) activation is challenging owing to the coexistence of multiple Cu species and the structural symmetry of PDS. Herein, we anchored a Cu atom with two pyridinic N atoms to synthesize a single-atom Cu catalyst (Cu_SA-NC). Experimental characterizations and theoretical calculations complemented each other well because of the uniform atomic active sites. The single-atom Cu was identified as the active site, and the unsaturated Cu-N₂ configuration was more conductive to PDS activation than the saturated Cu-N₄ configuration. Benefiting from the generation of Cu(III), Cu_SA-NC exhibited an obvious selective and anti-interference performance for pollutant degradation in a complex matrix. The superior catalytic activity of Cu_SA-NC compared with that of other reported Cu-based catalysts and good durability in a continuous-flow experiment further revealed the potential of Cu_SA-NC for practical applications. This work strongly deepens the understanding of the generation of Cu(III) in a single-atom Cu catalyst with unsaturated Cu-N₂ sites under PDS activation and develops an efficient approach for actual water purification.

The structure-activity relationship of aromatic compounds in advanced oxidation processes：a review

Advanced oxidation processes (AOPs) are widely used as efficient technologies to treat highly toxic and harmful substances in wastewater. Taking the most representative aromatic compounds (monosubstituted benzenes, substituted phenols and heterocyclic compounds) as examples, this paper firstly introduces their structures and the structural descriptors studied in AOPs before, and the influence of structural differences in AOPs with different reactive oxygen species (ROS) on the degradation rate was discussed in detail. The structure-activity relationship of pollutants has been previously analyzed through quantitative structure-activity relationship (QSAR) model, in which ROS is a very important influencing factor. When electrophilic oxidative species attacks pollutants, aromatic compounds with electron donating groups are more favorable for degradation than aromatic compounds with electron donating groups. While nucleophilic oxidative species comes to the opposite conclusion. The choice of advanced oxidation processes, the synergistic effect of various active oxygen species and the used catalysts will also change the degradation mechanism. This makes the structure-dependent activity relationship uncertain, and different conclusions are obtained under the influence of various experimental factors.

Insight into the oxidation of phenolic pollutants by enhanced permanganate with biochar: The role of high-valent manganese intermediate species

This work demonstrated that the oxidation of phenolic pollutants by permanganate (KMnO₄) was effectively enhanced by a commercial biochar. Detailed characterization data indicated that the biochar contains porous structures, amounts of defective sites and abundant redox-active groups. In the presence of biochar, the degradation efficiency of 4-nitrophenol by KMnO₄ surged from 5% to 92% in 180 min, up to 37.8% of total organic carbon (TOC) was removed. Meanwhile, acute toxicity of 4-nitrophenol was greatly reduced. Through analyzing oxidation products of triclosan (TCS) and using methyl phenyl sulfoxide (PMSO) as a chemical probe, high-valent Mn intermediates (i.e. Mn(VI)/Mn(V)) were proved to be the dominant oxidant in the KMnO₄/biochar system. Quantitative structure-activity relationships (QSARs) were established between oxidation rate constants of various substituted phenols and classical descriptor variables (i.e., Hammett constant σ⁺). KMnO₄/biochar was found to be less selective to the substituent variation of phenolic compounds compared with O₃, K₂FeO₄, ClO₂ and persulfate/carbon nanotube (PDS/CNT). This work provided a novel catalytic oxidation technology for eliminating phenolic compounds, and improved insights into the mechanistic study of the KMnO₄-based oxidation process.

Catalytic mechanism of nitrogen-doped biochar under different pyrolysis temperatures: The crucial roles of nitrogen incorporation and carbon configuration

To scrutinize the crucial role of carbon configuration and nitrogen speciation in peroxymonsulfate (PMS) activation, nitrogen-doped biochars (NBCs) were prepared at different pyrolysis temperatures (700, 800 and 900 °C) and named NBC700, NBC800 and NBC900, respectively. Nitrogen doping introduced many nitrogen-containing groups into NBCs and the carbon configuration and nitrogen speciation of NBCs were regularly changed by the pyrolysis temperature. Compared to the phenol (PN) removal in the pristine biochar (BC)/PMS system that mainly depended on adsorption, NBCs showed excellent PMS activation activity for efficient PN degradation and the PMS activation activity was highly dependent on the carbon configuration and nitrogen speciation of NBCs. Furthermore, the PMS activation pathways of NBCs were unveiled to convert ¹O₂ to electron transfer with increasing pyrolysis temperature, which was ascribed to the variation of active sites on NBCs caused by the regular changes in carbon configuration and nitrogen speciation. Pyridinic N and oxygen groups (CO, CO and O-C=O) were proposed as potential active sites on NBC700 and NBC800 for ¹O₂ generation via PMS activation. Differently, the highly sp²-hybridized carbon skeleton and graphitic N of NBC900 played an important role in the electron transfer pathway by acting as a carbon bridge to accelerate electron transfer from PN to PMS. This study provides new insight into the effects of carbon configuration and nitrogen speciation on PMS activation mechanism of NBCs and identifies opportunities for the subsequent catalyst design in a specific degradation pathway.

Regulating Crystal Facets of MnO2 for Enhancing Peroxymonosulfate Activation to Degrade Pollutants: Performance and Mechanism

On the catalyst surface, crystal facets with different surface atom arrangements and diverse physicochemical properties lead to distinct catalytic activity. Acquiring a highly reactive facet through surface regulation is an efficient strategy to promote the oxidative decomposition of wastewater organic pollutants via peroxymonosulfate (PMS) activation. However, the mechanism through which crystal facets affect PMS activation is still unclear. In this study, three facet-engineered α-MnO2 with different exposed facets were prepared via a facile hydrothermal route. The prepared 310-MnO2 exhibited superior PMS activation performance to 100-MnO2 and 110-MnO2. Moreover, the 310-MnO2/PMS oxidative system was active over a wide pH range and highly resistant to interfering substances from wastewater. These advantages of the 310-MnO2/PMS system make it highly promising for practical wastewater treatment. Based on quenching experiments, electron paramagnetic resonance (EPR) analysis, solvent exchange, and electrochemical measurements, mediated electron transfer was found to be the dominant nonradical pathway for p-chloroaniline (PCA) degradation. A sulfhydryl group (-SH) masking experiment showed that the highly exposed Mn atoms on the 310-MnO2 surface were sites of PMS activation. In addition, density functional theory (DFT) calculations confirmed that the dominant {310} facet promoted adsorption/activation of PMS, which favored the formation of more metastable complexes on the α-MnO2 surface. The reaction mechanism obtained here clarifies the relationship between PMS activation and crystal facets. This study provides significant insights into the rational design of high-performance catalysts for efficient water remediation.

Superior degradation of phenolic contaminants in different water matrices via non-radical Fenton-like mechanism mediated by surface-disordered WO3

Heterogeneous Fenton-like catalysis mediated by solid catalyst is a promising oxidation technology for water purification. The redox reactivity, cost-effectiveness, and environmental compatibility of solid catalyst play governing roles in oxidant activation, radical generation, and pollutant degradation. Herein, the surface-disordered WO₃ (D-WO₃) functionally engineered by the unique crystalline-amorphous core-shell structure is proven to be a superior solid catalyst of heterogeneous Fenton-like catalysis for peroxymonosulfate (PMS) activation and pollutant degradation in various water matrices. Six typical phenolic and dye pollutants are effectively and selectively degraded in the D-WO₃/PMS system with much reduced matrix effects. Both radical identifying and scavenging tests elucidate the important role of non-radical ¹O₂ and mediated electron transfer during PMS activation on the D-WO₃ surface. The superior Fenton-like activity of D-WO₃ can be mainly attributed to the surface and sub-surface distorted lattice sites with finely tailored atomic and electronic structures and surface chemistry. These distorted lattice sites can thermodynamically serve as the key reactive centers of dissociative adsorption and catalytic activation for both PMS and pollutant, with high adsorption energy, strong structural activation, and smooth electron transfer. Our findings provide a new chance for heterogeneous Fenton-like catalysis mediated by transition metal oxides with high capacity, low cost, and no toxicity for promising water purification.

Non-radical mechanism and toxicity analysis of β-cyclodextrin functionalized biochar catalyzing the degradation of bisphenol A and its analogs by peroxydisulfate

Bisphenols (BPs) are distributed in worldwide as typical environmental hormones, which potentially harm the ecological environment and human health. In this study, four BPs, i.e., bisphenol A, bisphenol F, bisphenol S, and bisphenol AF, were used as prototypes to identify the intrinsic differences in degradation mechanisms correlated with the molecular structures in peroxydisulfate (PDS)-based advanced oxidation processes (AOPs). Electron transfer was the main way of modified biochar to trigger the heterogenous catalysis of PDS, which can cause the degradation of BPs. Phenolic hydroxyl groups on bisphenol pollutants were considered as possible active sites, and the existence of substituents was the main reason for the differentiation in the degradation efficiency of various bisphenols. Results of ecotoxicity prediction showed that most intermediates produced by the degradation of BPs in the β-SB/PDS system, which was dominated by the electron transfer pathway, had a lower toxicity than the parent molecules, while the toxicity of several ring cleavage intermediates was higher. This study presents a simple modification scheme for the conversion of biochar into functional catalysts and provides insights into the mechanism of heterogeneous catalytic degradation mediated by modified biochar as well as the degradation differences of bisphenol pollutants and their potential ecotoxicity.

Metal-organic framework-derived magnetic carbon for efficient decontamination of organic pollutants via periodate activation: Surface atomic structure and mechanistic considerations

Practical implementation of periodate-based advanced oxidation processes for environmental remediation largely relies on the development of cost-effective and high-performance activators. Surface atomic engineering toward these activators is desirable but it remains challenging to realize improved activation properties. Here, a surface atomic engineering strategy used to obtain a novel hybrid activator, namely cobalt-coordinated nitrogen-doped graphitic carbon nanosheet-enwrapped cobalt nanoparticles (denoted as Co@NC-rGO), from a sandwich-architectured metal-organic framework/graphene oxide composite is reported. This activator exhibits prominent periodate activation properties toward pollutant degradation, surpassing previously reported transition-metal-based activators. Importantly, the activator shows good stability, magnetic reusability, and the potential for application in a complex water matrix. Density functional theory modeling implies that the strong activation capability of Co@NC-rGO is related to its surface atomic structure for which the embedded cobalt nanoparticles with abundant interfacial Co-N coordinations display modified electronic configurations on the active centers and benefit periodate adsorption. Quenching experiments and electrochemical measurements showed that the system could oxidize organics through a dominant nonradical pathway. Additionally, a lower concentration of cobalt leaching was observed for the Co@NC-rGO/periodate system than for its Co@NC-rGO/persulfate counterpart. Our work provides a pathway toward engineering surface atomic structures in hybrid activators for efficient periodate activation.

The nitrogen-doped multi-walled carbon nanotubes modified membrane activated peroxymonosulfate for enhanced degradation of organics and membrane fouling mitigation in natural waters treatment

The synthesized catalyst nitrogen-doped multi-walled carbon nanotubes (N-MWCNTs) were introduced into membrane technology for peroxymonosulfate (PMS) activation. The enhanced permeability of the N-MWCNTs-modified membrane might be attributed to the increase in hydrophilicity and membrane porosity. The catalytic degradation and membrane filtration performance for the N-MWCNTs-modified membrane/PMS system in treating different types of natural waters were evaluated. The removal of phenol by the N-MWCNTs-modified membrane was 83.67% in 2 min, which was greater than the phenol removal by the virgin membrane (3.39%) and N-MWCNT powder (41.42%), respectively. Moreover, the resultant membrane coupled with PMS activation exhibited outstanding removal effects on the fluorescent organics in the secondary effluent and Songhua River water. The combination effectively reduced the total membrane fouling caused by the secondary effluent, Songhua River water, and three typical model organics by 28.19-61.98%. Electron paramagnetic resonance and classical quenching tests presented that the active species (SO4·-, ·OH, and 1O2) and other non-radical processes generated by N-MWCNTs activated PMS decreased the foulants deposition on the membrane surface. Meanwhile, the membrane interception accelerated the aggregation of pollutants and PMS towards the membrane surface through applied pressure, facilitating their mass transfer to the N-MWCNTs surface for the catalysis exerted more effectively. This study demonstrated the potential application of the coupling of N-MWCNTs catalytic oxidation and the UF, which offers a promising prospect to improve the permeate quality and simultaneously overcome the membrane fouling barriers.

Role of sulfide-modified nanoscale zero-valent iron on carbon nanotubes in nonradical activation of peroxydisulfate

Sulfamethoxazole (SMX) is highly persistent and difficult to remove, making it urgent to find an efficient method for alleviating the enormous environmental pressure of SMX. In this study, sulfide-modified nanoscale zero-valent iron on carbon nanotubes (S-nZVI@CNTs) was prepared to activate peroxydisulfate (PDS) for the degradation of SMX. The results showed that SMX was completely removed within 40 min (k_obs=0.1058 min^-1) in the S-nZVI@CNTs/PDS system. By analyzing quenching experiments and electron paramagnetic resonance (EPR), singlet oxygen (¹O₂) was the main active species of the S-nZVI@CNTs/PDS system. ¹O₂ might be mediated by the abundant carbonyl groups (CO) on carbon nanotubes through spectroscopic analyses. In addition, sulfur doping transitioned the activation pathway to a nonradical pathway. Spectroscopic analyses and electrochemical experiments confirmed that the formation of CNTs-PDS complexes and S-nZVI could promote electron transfer on the catalyst surface. Furthermore, the main degradation intermediates of SMX were identified, and five possible transformation pathways were proposed. The S-nZVI@CNTs/PDS system possessed advantages including high anti-interference (Cl^-, NO^3-, HA), a strong applicability, recyclability and a low PDS consumption, offering new insight into the degradation of antibiotic wastewater.

Origins of Electron-Transfer Regime in Persulfate-Based Nonradical Oxidation Processes

Persulfate-based nonradical oxidation processes (PS-NOPs) are appealing in wastewater purification due to their high efficiency and selectivity for removing trace organic contaminants in complicated water matrices. In this review, we showcased the recent progresses of state-of-the-art strategies in the nonradical electron-transfer regimes in PS-NOPs, including design of metal and metal-free heterogeneous catalysts, in situ/operando characterization/analytical techniques, and insights into the origins of electron-transfer mechanisms. In a typical electron-transfer process (ETP), persulfate is activated by a catalyst to form surface activated complexes, which directly or indirectly interact with target pollutants to finalize the oxidation. We discussed different analytical techniques on the fundamentals and tactics for accurate analysis of ETP. Moreover, we demonstrated the challenges and proposed future research strategies for ETP-based systems, such as computation-enabled molecular-level investigations, rational design of catalysts, and real-scenario applications in the complicated water environment. Overall, this review dedicates to sharpening the understanding of ETP in PS-NOPs and presenting promising applications in remediation technology and green chemistry.

Reusing Sulfur-Poisoned Palladium Waste as a Highly Active, Nonradical Fenton-like Catalyst for Selective Degradation of Phenolic Pollutants

Recycling of deactivated palladium (Pd)-based catalysts can not only lower the economic cost of their industrial use but also save the cost for waste disposal. Considering that the sulfur-poisoned Pd (Pd_xS_y) with a strong Pd-S bond is difficult to regenerate, here, we propose a direct reuse of such waste materials as an efficient catalyst for decontamination via Fenton-like processes. Among the Pd_xS_y materials with different poisoning degrees, Pd₄S stood out as the most active catalyst for peroxymonosulfate activation, exhibiting pollutant-degradation performance rivaling the Pd and Co²⁺ benchmarks. Moreover, the incorporated S atom was found to tune the surface electrostatic potentials and charge densities of the Pd active site, triggering a shift in catalytic pathway from surface-bound radicals to predominantly direct electron transfer pathway that favors a highly selective oxidation of phenols. The catalyst stability was also improved due to the formation of strong Pd-S bond that reduces corrosion. Our work paves a new way for upcycling of Pd-based industrial wastes and for guiding the development of advanced oxidation technologies toward higher sustainability.

Activation of peroxydisulfate by carbon nanotube for the degradation of 2,4-dichlorophenol: Contributions of surface-bound radicals and direct electron transfer

Carbon materials have been used to activate peroxydisulfate (PDS) for the degradation of organic pollutants. The mechanism involved, especially whether radicals are formed in these processes, is still under debate. In this research, multi-walled carbon nanotube (MWCNT) was employed to activate PDS for the removal of 2,4-dichlorophenol (2,4-DCP). The effects of solution pH, PDS concentration, 2,4-DCP concentration, and MWCNT loading on the degradation of 2,4-DCP were investigated. The mechanism was explored via radical scavenging experiments, electron paramagnetic resonance (EPR) and MWCNT surface characterization. The results showed that the rate of 2,4-DCP degradation increased with the increasing solution pH, PDS concentration and MWCNT loading. The presence of OH and SO₄^- signals in EPR studies, no inhibitory effect in radical scavenging experiments, and the chlorination of MWCNT observed by X-ray photoelectron spectroscopy (XPS) suggested that surface reactions involving both surface-bound radicals and direct electron transfer were responsible for 2,4-DCP degradation. Reusability tests showed that the surface sites responsible for surface-bound radical formation were poisoned after PDS activation, while those responsible for direct electron transfer remained active after five cycles. This research provided the first in-depth insights for the dual roles of MWCNT in the PDS activation process.

Impact of chloride ions on activated persulfates based advanced oxidation process (AOPs): A mini review

Chloride ion (Cl^-) is ever-present in aquatic environments. Different Cl^- concentration have been reported in industrial water (760 mM), surface water (<21 mM), seawater (540 mM) and groundwater (<21 mM) which could potentially accumulate into large concentrations in the sea. This mini-review examines more than 200 studies and found that Cl^- ions can react with strong oxidants (SO₄^•-, ^•OH, and HSO₅^-) generated from persulfate activation, inducing the formation of chlorine radicals, that can either (1) directly react with organics or (2) generate chlorine radicals that can participate in the conversion of the organic substrate. Although the impact of chloride radicals have been identified as either negligible, positive, or negative (inhibitive) at different Cl^- concentrations, only a few studies have considered the possible generation of chlorinated by-products. Another essential detail that is often neglected is the mutagenicity and toxicity of these products, as only a few studies have reported on the biotoxicity, AOX (adsorbable organic halogen) and the degree of mineralization of Cl^- containing persulfate activated AOPs (Advanced Oxidation Process). Future studies need to consider the chemical analysis of the degradation products as well as the mutagenicity, toxicity and the biological effects pre and post-oxidation process. This evaluation will address several key issues including the properties, occurrence, and toxicity of the chlorinated products, which can significantly benefit its application in a large-scale environmental application.

Novel Nonradical Oxidation of Sulfonamide Antibiotics with Co(II)-Doped g-C3N4-Activated Peracetic Acid: Role of High-Valent Cobalt-Oxo Species

Herein, we report that Co(II)-doped g-C₃N₄ can efficiently trigger peracetic acid (PAA) oxidation of various sulfonamides (SAs) in a wide pH range. Quite different from the traditional radical-generating or typical nonradical-involved (i.e., singlet oxygenation and mediated electron transfer) catalytic systems, the PAA activation follows a novel nonradical pathway with unprecedented high-valent cobalt-oxo species [Co(IV)] as the dominant reactive species. Our experiments and density functional theory calculations indicate that the Co atom fixated into the nitrogen pots of g-C₃N₄ serves as the main active site, enabling dissociation of the adsorbed PAA and conversion of the coordinated Co(II) to Co(IV) via a unique two-electron transfer mechanism. Considering Co(IV) to be highly electrophilic in nature, different substituents (i.e., five-membered and six-membered heterocyclic moieties) on the SAs could affect their nucleophilicity, thus leading to the differences in degradation efficiency and transformation pathway. Also, benefiting from the selective oxidation of Co(IV), the established oxidative system exhibits excellent anti-interference capacity and achieves satisfactory decontamination performance under actual water conditions. This study provides a new nonradical approach to degrade SAs by efficiently activating PAA via heterogeneous cobalt-complexed catalysts.

Oily sludge derived carbons as peroxymonosulfate activators for removing aqueous organic pollutants: Performances and the key role of carbonyl groups in electron-transfer mechanism

In this work, low-cost carbon-based materials were developed via a facile one-pot pyrolysis of oily sludge (OS) and used as catalysts to activate peroxymonosulfate (PMS) for removing aqueous recalcitrant pollutants. By adjusting the pyrolysis temperature, the optimized OS-derived carbocatalyst manifested good performance for PMS activation to abate diverse organic pollutants in water treatment. Particularly, an average removal rate of 0.87 mol phenol per mol PMS per hour at a catalyst dosage of 0.2 g L^-1 is attained by the OS-derived carbocatalyst, higher than many other documented catalysts. A series of experimental evidences consolidated that organic pollutants were oxidized mainly via electron-transfer mechanism albeit the detection of singlet oxygen (¹O₂) from PMS activation driven by the OS-derived carbocatalyst. Specifically, the proportion of carbonyl groups (C˭O) in the carbocatalyst adopted with selective modification treatments to tailor the surface chemistry was found to be linearly correlated with the catalytic activity and theoretical calculations demonstrated that the reactions between C˭O and PMS to form surface reactive complexes were more energetically favorable compared to ¹O₂ generation. Herein, this study not only offers a new strategy for reusing OS as value-added persulfate activators but also deepens the fundamental understanding on the nonradical regime.

The in situ catalytic oxidation of sulfamethoxazole via peroxydisufate activation operated in a NG/rGO/CNTs composite membrane filtration

Metal-free carbonaceous composite membranes have been proven to effectively drive novel in situ catalytic oxidation for the degradation of organic pollutants via persulfates activation. In this study, nitrogen-doped graphene (NG) was employed as a modifier to enhance the catalytic activity of the carbon mats by assembly with reduced graphene oxide (rGO) and carbon nanotubes (CNTs) on the top of a nylon supporter. The morphology and performance of the NG/rGO/CNTs composite membrane were compared to those obtained without the addition of NG (rGO/CNTs). Owing to the larger nanochannels for water delivery and stronger hydrophobicity on the surface, the NG/rGO/CNTs composite membrane shows a superior low-pressure filtration performance in favor of energy-saving operation. For the in situ catalytic oxidation of the NG/rGO/CNTs composite membrane through the activation of peroxydisufate (PDS), the average removal rate of sulfamethoxazole (SMX), one of frequently detected sulfonamide antibiotics in water, can reach 21.7 mg·m^-2·h^-1 under continuous filtration mode, which was 17% more rapid than that of the rGO/CNTs, resulting in significant detoxifying of the oxidation intermediates. Owing to the addition of NG into the carbon mats, the reactive nitrogen-doped sites identified by X-Ray photoelectron spectroscopy (XPS), such as pyridinic and graphitic N, played important roles in PDS activation, while both the radical and non-radical pathways were involved in in situ catalytic oxidation. According to the experimental evidence of the effects that solution environment has on the SMX removal and transmembrane pressure, the NG/rGO/CNTs composite membrane shows a relatively high resistance to changes in the solution pH, chloride ion inhibition, and background organics fouling. These results suggest a new approach to the application of activated persulfate oxidation in water treatment, such that improvements to the reaction stability warrant further investigation.