Three-Dimensional Free Chlorine and Monochloramine Biofilm Penetration: Correlating Penetration with Biofilm Activity and Viability

Formation of filamentous fungal biofilms in water and the transformation of resistance to chlor(am)ine disinfection

Biofilms are composed of complex multi-species in nature, potentially threatening drinking water safety. In this work, the formation of single- and multi-species fungal biofilms formed by Aspergillus niger (A. niger) and Aspergillus flavus (A. flavus), and the inactivation of mature biofilms using chlor(am)ine were firstly investigated. Results revealed that the antagonistic interaction occurred between A. niger and A. flavus. Chloramination at 20 mg/L for 30 min achieved 74.74 % and 76.04 % inactivation of A. flavus and multi-species biofilm, which were 1.69- and 1.84-fold higher than that of chlorine at the same condition. However, no significant difference was observed in the inactivation of A. niger biofilm between chlorine and monochloramine disinfection due to the lower amount of extracellular polymeric substance produced by it (p > 0.05). The inactivation of biofilm by monochloramine fitted the Weibull model well. According to the Weibull model, the monochloramine resistance of biofilm were as follows: A. flavus > multi-species > A. niger biofilm. Besides, an increase in reactive oxygen levels, damage of cell membrane, and leakage of intracellular substances in biofilms were observed after chlor(am)ination. More intracellular polysaccharides and proteins were leaked in chloramination inactivation (p < 0.05). This study provides important implications for controlling fungal biofilm.

Exploring the ignored role of escaped algae in a pilot-scale DWDS: Disinfectant consumption, DBP yield and risk formation

Insufficient treatments during bloom-forming seasons allow algae to enter the subsequent drinking water distribution system (DWDS). Yet, scarce information is available regarding the role escaped algae to play in the DWDS, and how they interact with the system. Thus, three scenarios were conducted: a pilot DWDS with algae (a), pipe water (b), and pipe water with algae (c). Experimental results showed that, compared to biofilm and bulk water, escaped algae required fewer disinfectants. Competition for disinfectants varied with algal strains (Microcystis aeruginosa, MA; Pseudanabaena sp., PS) and disinfectant types (chlorine, Cl2; chloriamine, NH2Cl). Algae in the MA-Cl2 group showed the highest demand (6.25%-36.02%). However, the low-concentration disinfectants distributed to algae could trigger distinct algal status alternations. Cl2 diffused into intact MA cells and reacted with intracellular compositions. Damaged PS cells reached 100% within 2 h. Typical disinfection byproducts (DBPs), including trihalomethanes (THMs), haloacetic acids and halogenated acetonitriles were examined. Disinfectant types and algal strains affected DBP yield and distribution. Although disinfectants consumed by algae might not promote dissolved DBP formation, especially for THMs. DBP formation of the other components was affected by escaped algae via changing disinfectant assignment (reduced by 45.45% for MA-Cl2) and transformation efficiency (by 34.52%). The cytotoxicity risks were estimated. Dissolved DBP-induced risks were not added when escaped algae occurred, whereas disruption and release of intracellular substances increased risks; the maximum cytotoxicity did not occur at 12 h rather than at the end (24 h). Overall, this study provided an innovative perspective on algal-related water quality issues in water systems.

Unraveling bacterial and eukaryotic communities in secondary water supply systems: Dynamics, assembly, and health implications

Secondary water supply systems (SWSSs) are crucial water supply infrastructures for high-rise buildings in metropolitan cities. In recent years, they have garnered public attention due to increased microbial risks. However, our understanding of SWSS microbial ecology, particularly concerning the composition of eukaryotes and the underlying mechanisms driving microbial dynamics and assembly in SWSSs, remains elusive. Herein, we conducted a comprehensive investigation on both eukaryotes and bacteria along the water transportation pathway and across various microbial habitats (water, biofilm, and sediment) in SWSSs. Sequencing results revealed that eukaryotes within SWSSs predominantly consist of protists (average abundance: 31.23%) and metazoans (20.91%), while amoebae accounted for 4.71% of the total. During water transportation from the distribution mains to taps, both bacterial and eukaryotic communities exhibited significant community shifts, and higher degrees of variation were observed for eukaryotic community among different locations within SWSSs. The normalized stochasticity ratio (NST) analysis demonstrated that bacterial community assembly was governed by stochastic processes, while eukaryotic community assembly was primarily shaped by deterministic processes. Within SWSS tanks, bacterial communities significantly varied across water, biofilm, and sediment, whereas eukaryotic communities showed minor differences among these habitats. The co-occurrence networks analysis revealed that tank biofilm and sediment harbored more eukaryote-bacterium linkages than water, suggesting biofilm and sediment might be hotspots for inter-kingdom interactions. We also applied FEAST analysis to track the source of tap water microbiota, results of which showed that household-tap bacteria mainly originated from tank water. In contrast, tank biofilm was identified as the primary microbial source to eukaryotes in household tap water. Additionally, engineering factors such as tank materials significantly affected amoeba community, and the SWSS configuration was found to influence Legionella and Mycobacterium abundances in SWSSs. Overall, results of our study shed light on the microbial ecology in SWSS and provide insights into SWSS management and health risk control.

Microelectrode evaluation of in situ oxidant reactivity and pH variability at new ductile iron and copper coupon surfaces

Thirty-two short term (∼7.5 h) abiotic experiments were conducted with new ductile iron and copper coupons exposed to various water qualities, including pH (7 or 9), dissolved inorganic carbon (DIC, 10 or 50 mg C L-1) and phosphate (0 or 3 mg P L-1) concentrations and 4 mg Cl2 L-1 free chlorine or monochloramine. To quantify oxidant reactivity with the new metal coupons, microelectrodes were used to obtain oxidant (free chlorine or monochloramine and dissolved oxygen (DO)) concentration and pH microprofiles from the bulk water to near the metal coupon surface. From the microprofiles, apparent surface reaction rate constants (k) were determined for each oxidant. An ANOVA analysis evaluated if the five variables (Material, Oxidant, Phosphate, DIC, and pH) significantly affected estimates of k, finding that the Material and Oxidant variables and their interaction were statistically significant (p<0.05), but the effect of variables of Phosphate, DIC, and pH on k values were not significant in this study. In general, both ductile iron and copper coupons showed significant surface reactivity towards free chlorine and monochloramine. For ductile iron, DO consumption was greater than for copper, which showed minimal DO reactivity, and DO was less reactive towards the copper surface than either free chlorine or monochloramine. Furthermore, pH microprofiles provided insight into the complexity that might exist near corroding metal surfaces where the bulk water pH may be substantially different from that measured near metal surfaces which is significant as pH is a controlling variable in terms of scale formation and metal solubility. This study represents an important first step towards using microelectrodes to (1) understand and provide direct measurement of oxidant microprofiles from the bulk water to the metal surface; (2) determine pipe wall reactivity using the directly measured concentrations profiles versus estimated pipe wall reactivity from bulk water measurements, and (3) understand how variables measured by bulk water samples (e.g., pH) may be drastically different from what is occurring at and near the metal surface. Together, these insights will assist in understanding disinfectant residual maintenance, corrosion, and metal release.

Selective Enrichment of Nitrososphaera viennensis-Like Ammonia-Oxidizing Archaea over Ammonia-Oxidizing Bacteria from Drinking Water Biofilms

Ammonia-oxidizing archaea (AOA) can oxidize ammonia to nitrite for energy gain. They have been detected in chloraminated drinking water distribution systems (DWDS) along with the more common ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB). To date, no members of the AOA have been isolated or enriched from drinking water environments. To begin the investigation of the role of AOA in chloraminated DWDS, we developed a selective approach using biofilm samples from a full-scale operational network as inoculum. A Nitrososphaera viennensis-like AOA taxon was enriched from a mixed community that also included Nitrosomonas-like AOB while gradually scaling up the culture volume. Dimethylthiourea (DMTU) and pyruvate at 100 μM were added to promote the growth of AOA while inhibiting AOB. This resulted in the eventual washout of AOB, while NOB were absent after 2 or 3 rounds of amendment with 24 μM sodium azide. The relative abundance of AOA in the enrichment increased from 0.2% to 39.5% after adding DMTU and pyruvate, and further to 51.6% after filtration through a 0.45-μm pore size membrane, within a period of approximately 6 months. IMPORTANCE Chloramination has been known to increase the risk of nitrification episodes in DWDS due to the presence of ammonia-oxidizing microorganisms. Among them, AOB are more frequently detected than AOA. All publicly available cultures of AOA have been isolated from soil, marine or surface water environments, meaning they are allochthonous to DWDS. Hence, monochloramine exposure studies involving these strains may not accurately reflect their role in DWDS. The described method allows for the rapid enrichment of autochthonous AOA from drinking water nitrifying communities. The high relative abundance of AOA in the resulting enrichment culture reduces any confounding effects of co-existing heterotrophic bacteria when investigating the response of AOA to varied levels of monochloramine in drinking water.

A Critical Review on Chemical Speciation of Chlorine-Produced Oxidants (CPOs) in Seawater. Part 1: Chlorine Chemistry in Seawater and Its Consequences in Terms of Biocidal Effectiveness and Environmental Impact

Seawater chlorination has three main industrial uses: disinfection of water and installations, control of biofouling, and preventing the transport of aquatic invasive species. Once in contact with seawater, chlorine reacts rapidly with water constituents (e.g. bromide ions, ammonia, and nitrogen-containing compounds) to form a range of oxidative species (e.g. bromine and N-haloamines), termed "chlorine-produced oxidants" (CPOs) or "total residual oxidants" (TRO). The chemical nature of CPOs and their concentration are a function of two categories of parameters related to treatment modality (e.g. chlorine dose) and water quality (e.g. temperature, pH, ammonia concentration, and organic constituents). The chlorination process may result in continuous or intermittent releases of CPOs in seawater. The reactivity and potential ecotoxicity of CPO species largely depend on their physical and chemical properties. Therefore, evaluation of the biocidal effectiveness of chlorination and its potential impacts requires not only determining the sum of CPOs (via a bulk parameter), but also their chemical speciation. The aim of this article - which is the first of a trilogy dedicated to the chemical speciation of CPOs in seawater - is to provide an overview of current knowledge about chlorine chemistry in seawater and to discuss the biocidal efficacy and the environmental fate of resulting CPOs. The 2nd and 3rd articles delineate a comprehensive and critical review of analytical methods and approaches for the determination of CPOs in seawater.

The elimination effects of lavender essential oil on Listeria monocytogenes biofilms developed at different temperatures and the induction of VBNC state

Listeria monocytogenes is a typical foodborne pathogen that causes hard-to-treat bacterial infections, mainly due to its ability to form biofilm and enter into a viable but non-culturable state (VBNC). In this study, we investigated the removal effects of four antimicrobial agents on L. monocytogenes biofilms formed at 32 ℃ and 10 ℃, analyzed the resistances of the mature biofilms to antimicrobial agents, and explored the VBNC state of cells in mature biofilms induced by lavender essential oil (LEO). The results showed that the growth of L. monocytogenes was completely inhibited when 1.6% (v/v) of the LEO was added. Meanwhile, the results of the crystal violet staining and XTT reduction method indicated that different concentrations of LEO significantly reduced L. monocytogenes biofilms biomass and metabolic activities, followed by sodium hypochlorite, lactic acid, and hydrogen peroxide. Moreover, the confocal laser scanning microscopy (CLSM) images confirmed that the treated biofilms became thinner, the structure was sparse, and the appearance was blurry. More interestingly, L. monocytogenes biofilms developed at 10 ℃ were less susceptible to the sanitizers than that formed at 32 ℃. In addition, LEO presented a more significant dispersing effect on the biofilm cells, and 1/2 MIC to 4 MIC of LEO could induce fewer VBNC state cells in biofilm and plankton compared with sodium hypochlorite. This study indicated that the LEO could be considered as an ideal antibiofilm agent for controlling L. monocytogenes. But we should pay attention to the resistance of the biofilms developed at low temperatures.

Legionella: A Promising Supplementary Indicator of Microbial Drinking Water Quality in Municipal Engineered Water Systems

Opportunistic pathogens (OPs) are natural inhabitants and the predominant disease causative biotic agents in municipal engineered water systems (EWSs). In EWSs, OPs occur at high frequencies and concentrations, cause drinking-water-related disease outbreaks, and are a major factor threatening public health. Therefore, the prevalence of OPs in EWSs represents microbial drinking water quality. Closely or routinely monitoring the dynamics of OPs in municipal EWSs is thus critical to ensuring drinking water quality and protecting public health. Monitoring the dynamics of conventional (fecal) indicators (e.g., total coliforms, fecal coliforms, and Escherichia coli) is the customary or even exclusive means of assessing microbial drinking water quality. However, those indicators infer only fecal contamination due to treatment (e.g., disinfection within water utilities) failure and EWS infrastructure issues (e.g., water main breaks and infiltration), whereas OPs are not contaminants in drinking water. In addition, those indicators appear in EWSs at low concentrations (often absent in well-maintained EWSs) and are uncorrelated with OPs. For instance, conventional indicators decay, while OPs regrow with increasing hydraulic residence time. As a result, conventional indicators are poor indicators of OPs (the major aspect of microbial drinking water quality) in EWSs. An additional or supplementary indicator that can well infer the prevalence of OPs in EWSs is highly needed. This systematic review argues that Legionella as a dominant OP-containing genus and natural inhabitant in EWSs is a promising candidate for such a supplementary indicator. Through comprehensively comparing the behavior (i.e., occurrence, growth and regrowth, spatiotemporal variations in concentrations, resistance to disinfectant residuals, and responses to physicochemical water quality parameters) of major OPs (e.g., Legionella especially L. pneumophila, Mycobacterium, and Pseudomonas especially P. aeruginosa), this review proves that Legionella is a promising supplementary indicator for the prevalence of OPs in EWSs while other OPs lack this indication feature. Legionella as a dominant natural inhabitant in EWSs occurs frequently, has a high concentration, and correlates with more microbial and physicochemical water quality parameters than other common OPs. Legionella and OPs in EWSs share multiple key features such as high disinfectant resistance, biofilm formation, proliferation within amoebae, and significant spatiotemporal variations in concentrations. Therefore, the presence and concentration of Legionella well indicate the presence and concentrations of OPs (especially L. pneumophila) and microbial drinking water quality in EWSs. In addition, Legionella concentration indicates the efficacies of disinfectant residuals in EWSs. Furthermore, with the development of modern Legionella quantification methods (especially quantitative polymerase chain reactions), monitoring Legionella in ESWs is becoming easier, more affordable, and less labor-intensive. Those features make Legionella a proper supplementary indicator for microbial drinking water quality (especially the prevalence of OPs) in EWSs. Water authorities may use Legionella and conventional indicators in combination to more comprehensively assess microbial drinking water quality in municipal EWSs. Future work should further explore the indication role of Legionella in EWSs and propose drinking water Legionella concentration limits that indicate serious public health effects and require enhanced treatment (e.g., booster disinfection).

Chloramine Concentrations within Distribution Systems and Their Effect on Heterotrophic Bacteria, Mycobacterial Species, and Disinfection Byproducts

Chloramine is a secondary disinfectant used to maintain microbial control throughout public water distribution systems. This study investigated the relationship between chloramine concentration, heterotrophic bacteria, and specific Mycobacterium species. Sixty-four water samples were collected at four locations within the utility's distribution network on four occasions. Water samples were analyzed for total chlorine and monochloramine. Traditional culture methods were applied for heterotrophic bacteria and nontuberculous mycobacteria (NTM), and specific quantitative polymerase chain reaction (qPCR) assays were used to detect and quantify Mycobacterium avium, M. intracellulare, and M. abscessus. Total chlorine and monochloramine concentrations decreased between the distribution entry point (4.7 mg/L and 3.4 mg/L as Cl2, respectively) to the maximum residence time location (1.7 mg/L and 1.1 mg/L as Cl2, respectively). Results showed that heterotrophic bacteria and NTM counts increased by two logs as the water reached the average residence time (ART) location. Microbiological detection frequencies among all samples were: 86% NTMs, 66% heterotrophic bacteria, 64% M. abscessus, 48% M. intracellulare, and 2% M. avium. This study shows that heterotrophic bacteria and NTM are weakly correlated with disinfectant residual concentration, R2=0.18 and R2=0.04, respectively. Considering that specific NTMs have significant human health effects, these data fill a critical knowledge gap regarding chloramine's impact on heterotrophic bacteria and Mycobacterial species survival within public drinking water distribution systems.

Thermal and chemical disinfection of water and biofilms: only a temporary effect in regard to the autochthonous bacteria

Thermal and chemical disinfection of technical water systems not only aim at minimizing the level of undesired microorganisms, but also at preventing excessive biofouling, clogging and interference with diverse technical processes. Typically, treatment has to be repeated in certain time intervals, as the duration of the effect is limited. The transient effect of disinfection was demonstrated in this study applying different treatments to water and biofilms including heat, chlorination, a combination of hydrogen peroxide and peracetic acid and monochloramine. Despite the diverse treatments, the reduction in live bacteria was followed by regrowth in all cases, underlining the universal validity of this phenomenon. The study shows that autochthonous bacteria can reach the concentrations given prior to treatment. The reason is seen in the nutrient concentration that has not changed and that forms the basis for regrowth. Nutrients are released by disinfection from lysed cells or are still fixed in dead biomass that is subsequently scavenged by necrotrophic growth. Treatment cycles therefore only provide a transient reduction of water microbiology if nutrients are not removed. When aiming at greater sustainability of the effect, biocidal treatment has to be equally concerned about nutrient removal by subsequent cleaning procedures as about killing efficiency.

The "Burn": water quality and microbiological impacts related to limited free chlorine disinfection periods in a chloramine system

To control microbial proliferation and nitrification within distribution systems, utilities practicing secondary disinfection chloramination often discontinue their ammonia feed and provide a short, free chlorine disinfection period (FClP), commonly referred to as a "chlorine burn". However, the success and practicality of this approach is often criticized because of the return to nitrification; yet, previous studies conducted in full-scale distribution systems do not contain the sampling frequency to determine how quickly nitrification can return. In this research, a total of 15 hydrants distributed across hydraulically modeled water ages were sampled for 21 sampling events over a period spanning two annual FClPs (2018 and 2019) to investigate the water quality, planktonic community, and, using a new sampling technique, established biofilm community impacts within a single, distribution system pressure zone. Hydrants measured elevated nitrite only 10 weeks after the end of the FClP and live cell counts in the bulk and scour samples statistically significantly increased within two weeks after the FClP ended and chloramine disinfection resumed, indicating limited impacts from a FClP. Furthermore, the FClP significantly increased iron concentrations during the period of free chlorine disinfection creating a consumer water quality concern. Microbial fingerprint analysis using flow cytometry revealed that beta diversity did not significantly change for sampling locations that experienced even periodic low total chlorine concentrations. Only locations that maintained high chlorine residuals throughout both chloramine and free chlorine disinfection periods demonstrated significant changes in bulk water microbial community. Even for these locations, microbial communities of the scoured biofilms remained similar over the course of the study.

Laboratory preparation of monochloramine for environmental research: A comparison of four commonly used protocols

Monochloramine (MCA) is often used as a secondary disinfectant in drinking water distribution systems (DWDS) for controlling the regrowth of microorganisms. Laboratory experiments to study the efficacy of MCA and formation of disinfection byproducts in DWDS all require the preparation of MCA. Different protocols for the preparation of MCA have been used in the literature. In this study, we compared four published protocols that are frequently used to prepare MCA in the environmental research community. Our results showed that the choice of protocol could result in substantial differences in decay kinetics and disinfection efficacy of the prepared MCA. The discrepancies highlight an immediate need for the standardization of MCA preparation protocols for laboratory-scale drinking water research.

Mycobacterial biofilms as players in human infections: a review

The role of biofilms in pathogenicity and treatment strategies is often neglected in mycobacterial infections. In recent years, the emergence of nontuberculous mycobacterial infections has necessitated the development of novel prophylactic strategies and elucidation of the mechanisms underlying the establishment of chronic infections. More importantly, the question arises whether members of the Mycobacterium tuberculosis complex can form biofilms and contribute to latent tuberculosis and drug resistance because of the long-lasting and recalcitrant nature of its infections. This review discusses some of the molecular mechanisms by which biofilms could play a role in infection or pathological events in humans.

Effects of the chlorination and pressure flushing of drippers fed by reclaimed wastewater on biofouling

Milli-channel baffle labyrinths are widely used in drip irrigation systems. They induce a pressure drop enabling drip irrigation. However, with a section thickness that is measured in mm², they are sensitive to clogging, which reduces the performance and service life of a drip irrigation system. The impact of chlorination (1.5 ppm of free chlorine during 1 h application) and pressure flushing (0.18 MPa) on the biofouling of non-pressure-compensating drippers, fed by real reclaimed wastewater, was studied at lab scale using optical coherence tomography. The effect of these treatments on microbial composition (bacteria and eukaryotes) was also investigated by High-throughput DNA sequencing. Biofouling was mainly observed in the inlet, outlet and return areas of the milli-labyrinth channel from drippers. Chlorination reduced biofilm development, particularly in the mainstream of the milli-labyrinth channel, and it was more efficient when combined with pressure flushing. Moreover, chlorination was more efficient in maintaining water distribution uniformity (CU < 95% compared to less than 85% for unchlorinated lines). It reduced more efficiently the bacterial concentration (≈1 log) and the diversity of the bacterial community in the dripper biofilms compared to the pressure flushing method. Chlorination significantly modified the microbial communities, promoting chlorine-resistant bacteria such as Comamonadaceae or Azospira. Inversely, several bacterial groups were identified as sensitive to chlorination such as Chloroflexi and Planctomycetes. Nevertheless, one month after stopping the treatments bacterial diversity recovered and the chlorine-sensitive bacteria such as Chloroflexi phylum and the Saprospiraceae, Spirochaetaceae, Christensenellaceae and Hydrogenophilaceae families re-emerged in conjunction with the growth of biofouling, highlighting the resilience of the bacteria originating from drippers. Based on PCoA analyses, the structure of the bacterial communities still clustered separately from non-chlorinated drippers, showing that the effect of chlorination was still detectable one month after stopping the treatment.

The role of biofilms on the formation and decay of disinfection by-products in chlor(am)inated water distribution systems

This study investigated the role of biofilms on the formation and decay of disinfection by-products (DBPs) in chlorine (Cl₂) or monochloramine (NH₂Cl) disinfected reactors under the conditions related to drinking water distribution systems (DWDSs). Biofilm analysis results revealed that at 0.5 mg/L of disinfectant residual, both Cl₂ and NH₂Cl were not effective to remove biofilms. As the disinfectant residual increased, biofilms could be eradicated by Cl₂, while remaining biofilms were still present even under the highest allowable NH₂Cl dose (4 mg/L) for 25 days. Low DBP formation was observed under the recommended minimum Cl₂ residual (0.5 mg/L), which could be attributed to limited Cl₂ reactions with biofilms, as well as a combination of the volatilization and biodegradation of DBPs. However, when Cl₂ residuals reached 2 mg/L, DBP concentrations in bulk water increased sharply beyond the DBP formation of the feed solution, with trihalomethanes and haloacetic acids being the most prevalent DBP species. The sharp increase was temporary for 15 days because of the removal of biofilms. For unregulated DBPs, high levels of haloacetonitriles were observed as attached biofilms reacted with the increased Cl₂ dose and provided an additional organic nitrogen source for nitrogenous DBP formation. When maximum Cl₂ residual (4 mg/L) was applied, no further increase of DBPs was observed because of biofilm eradication. For NH₂Cl disinfection, the DBP levels were much lower than those of Cl₂ disinfection, with small differences in DBP formation for different NH₂Cl residuals. Overall, this study provides insights into optimizing disinfection protocols for water utilities by balancing the benefits of disinfection application for biofilm control with minimized toxic DBP formation in DWDSs.

Elucidating the Role of Virulence Traits in the Survival of Pathogenic E. coli PI-7 Following Disinfection

Reuse and discharge of treated wastewater can result in dissemination of microorganisms into the environment. Deployment of disinfection strategies is typically proposed as a last stage remediation effort to further inactivate viable microorganisms. In this study, we hypothesize that virulence traits, including biofilm formation, motility, siderophore, and curli production along with the capability to internalize into mammalian cells play a role in survival against disinfectants. Pathogenic E. coli PI-7 strain was used as a model bacterium that was exposed to diverse disinfection strategies such as chlorination, UV and solar irradiation. To this end, we used a random transposon mutagenesis library screening approach to generate 14 mutants that exhibited varying levels of virulence traits. In these 14 isolated mutants, we observed that an increase in virulence traits such as biofilm formation, motility, curli production, and internalization capability, increased the inactivation half-lives of mutants compared to wild-type E. coli PI-7. In addition, oxidative stress response and EPS production contributed to lengthening the lag phase duration (defined as the time required for exposure to disinfectant prior to decay). However, traits related to siderophore production did not help with survival against the tested disinfection strategies. Taken together, the findings suggested that selected virulence traits facilitate survival of pathogenic E. coli PI-7, which in turn could account for the selective enrichment of pathogens over the non-pathogenic ones after wastewater treatment. Further, the study also reflected on the effectiveness of UV as a more viable disinfection strategy for inactivation of pathogens.

Legionella Diversity and Spatiotemporal Variation in The Occurrence of Opportunistic Pathogens within a Large Building Water System

Understanding Legionella survival mechanisms within building water systems (BWSs) is challenging due to varying engineering, operational, and water quality characteristics unique to each system. This study aimed to evaluate Legionella, mycobacteria, and free-living amoebae occurrence within a BWS over 18-28 months at six locations differing in plumbing material and potable water age, quality, and usage. A total of 114 bulk water and 57 biofilm samples were analyzed. Legionella culturability fluctuated seasonally with most culture-positive samples being collected during the winter compared to the spring, summer, and fall months. Positive and negative correlations between Legionella and L. pneumophila occurrence and other physiochemical and microbial water quality parameters varied between location and sample types. Whole genome sequencing of 19 presumptive Legionella isolates, from four locations across three time points, identified nine isolates as L. pneumophila serogroup (sg) 1 sequence-type (ST) 1; three as L. pneumophila sg5 ST1950 and ST2037; six as L. feeleii; and one as Ochrobactrum. Results showed the presence of a diverse Legionella population with consistent and sporadic occurrence at four and two locations, respectively. Viewed collectively with similar studies, this information will enable a better understanding of the engineering, operational, and water quality parameters supporting Legionella growth within BWSs.

Recent Developments of PFAS-Detecting Sensors and Future Direction: A Review

Per- and poly-fluoroalkyl substances (PFASs) have recently been labeled as toxic constituents that exist in many aqueous environments. However, traditional methods used to determine the level of PFASs are often not appropriate for continuous environmental monitoring and management. Based on the current state of research, PFAS-detecting sensors have surfaced as a promising method of determination. These sensors are an innovative solution with characteristics that allow for in situ, low-cost, and easy-to-use capabilities. This paper presents a comprehensive review of the recent developments in PFAS-detecting sensors, and why the literature on determination methods has shifted in this direction compared to the traditional methods used. PFAS-detecting sensors discussed herein are primarily categorized in terms of the detection mechanism used. The topics covered also include the current limitations, as well as insight on the future direction of PFAS analyses. This paper is expected to be useful for the smart sensing technology development of PFAS detection methods and the associated environmental management best practices in smart cities of the future.

Bacterial response mechanism during biofilm growth on different metal material substrates: EPS characteristics, oxidative stress and molecular regulatory network analysis

Overwhelming growth of bacterial biofilms on different metal-based pipeline materials are intractable and pose a serious threat to public health when tap water flows though these pipelines. Indeed, the underlying mechanism of biofilm growth on the surface of different pipeline materials deserves detailed exploration to provide subsequent implementation strategies for biofilm control. Thus, in this study, how bacteria response to their encounters was explored, when they inhabit different metal-based pipeline substrates. Results revealed that bacteria proliferated when they grew on stainless steel (SS) and titanium sheet (Ti), quickly developing into bacterial biofilms. In contrast, the abundance of bacteria on copper (Cu) and nickel foam (Ni) substates decreased sharply by 4-5 logs within 24 h. The morphological shrinkage and shortening of bacterial cells, as well as a sudden 64-fold increase of carbohydrate content in extracellular polymeric substances (EPS), were observed on Cu substrate. Furthermore, generation of reactive oxygen species and fluctuation of enzymatic activity demonstrated the destruction of redox equilibrium in bacteria. Bacteria cultured on Cu substrate showed the strongest response, followed by Ni, SS and Ti. The oxidative stress increased quickly during the growth of bacterial biofilm, and almost all tested metal transporter-related genes were upregulated by 2-11 folds on Cu, which were higher than on other substrates (1-2 folds for SS and Ti, 2-9 folds for Ni). Finally, these behaviors were compared under the biofilm regulatory molecular network. This work may facilitate better understanding different response mechanisms during bacterial biofilm colonization on metal-based pipelines and provide implications for subsequent biofilm control.

Is It Possible to Measure Monobromamine Using Colorimetric Methods Based on the Berthelot Reaction, Like for Monochloramine?

Analytical methods based on the Berthelot reaction were recently adapted for determining monochloramine (MCA: NH2Cl) in freshwater. The specificity of the Berthelot reaction with regard to MCA is related to the need for two exchangeable hydrogen atoms to form indophenol blue. MCA can thus be distinguished from organic N-chloramines, which have only one exchangeable hydrogen atom. Monobromamine (MBA: NH2Br) may be formed during chlorination of seawater containing ammonium ions. Quantifying MBA is quite challenging and no method has been reported for its specific determination in seawater. As MBA also has two exchangeable hydrogen atoms, its reactivity might be analogous to that of MCA, but this hypothesis has never been investigated. The aim of this study was to examine the applicability of the so-called “indophenol method” for the determination of the MBA in freshwater and seawater samples. The reaction between MBA and Berthelot reagents was studied in both ultrapure water and artificial seawater. The reaction products were characterized by using gas chromatography coupled to mass spectrometry (GC–MS), Fourier transform-ion cyclotron resonance mass spectrometry (FT–ICR MS), and UV–vis spectroscopy. Results showed that colorimetric methods based on the Berthelot reaction were not suitable for measuring MBA in freshwater or seawater, since NH2Br reacts with alkaline phenol derivative via electrophilic substitution to form ortho- and para-brominated phenols instead of forming indophenol.

Characterisation of Microbial Community Associated with Different Disinfection Treatments in Hospital hot Water Networks

Many disinfection treatments can be adopted for controlling opportunistic pathogens in hospital water networks in order to reduce infection risk for immunocompromised patients. Each method has limits and strengths and it could determine modifications on bacterial community. The aim of our investigation was to study under real-life conditions the microbial community associated with different chemical (monochloramine, hydrogen peroxide, chlorine dioxide) and non-chemical (hyperthermia) treatments, continuously applied since many years in four hot water networks of the same hospital. Municipal cold water, untreated secondary, and treated hot water were analysed for microbiome characterization by 16S amplicon sequencing. Cold waters had a common microbial profile at genera level. The hot water bacterial profiles differed according to treatment. Our results confirm the effectiveness of disinfection strategies in our hospital for controlling potential pathogens such as Legionella, as the investigated genera containing opportunistic pathogens were absent or had relative abundances ≤1%, except for non-tuberculous mycobacteria, Sphingomonas, Ochrobactrum and Brevundimonas. Monitoring the microbial complexity of healthcare water networks through 16S amplicon sequencing is an innovative and effective approach useful for Public Health purpose in order to verify possible modifications of microbiota associated with disinfection treatments.

How to Identify the "LIVE/DEAD" States of Microbes Related to Biosensing

In this work, we fabricated a microbial biosensor with long-term stability, which relied on microbial activity. Activity of the microbe was commonly estimated by LIVE/DEAD assay and the propidium iodide (PI)-stained one was judged as dead. Herein, we proposed the utilization of a physiological state of microbes, which was neither live nor dead but between them. In this state, microbes represented a high PI-stained ratio but still had catalytic ability. This microbial state was obtained by forming the biofilm under the conditions of poor nutrition and low temperature. Thus, the dividing and proliferating ability of the microbes in the biofilm was weak, which was beneficial for long-term stability. This mechanism was further confirmed by the biosensors made from multifarious substrate materials, including graphene-based gel, biomass-based gel, graphite felt, and poly(vinyl chloride). This biosensor was applied to water pollution monitoring in the laboratory for 2 years and then was integrated into a multiparameter water quality monitoring station on a local lake for 2.5 years.

Identification and characterization of bilgewater emulsions

Literature on bilgewater focuses on empirically determined treatment methods and lacks specific information on emulsion characteristics. Therefore, this review discusses potential emulsion stabilization mechanisms that occur in bilgewater and evaluates common approaches to study their behavior. Current knowledge on emulsion formation, stabilization, and destabilization is outlined to provide researchers and bilgewater treatment operators with the knowledge needed to determine emulsion prevention and treatment strategies. Furthermore, a broad assessment of bilgewater emulsion characterization techniques, from general water quality analysis to advanced droplet stability characterization methods are discussed in detail. Lastly, a survey of typical bilgewater characteristics and information on standard synthetic bilgewater mixtures used in the testing of oil pollution abatement equipment are presented. Overall, the goal of this article is to provide a better understanding of physical and thermodynamic properties of emulsions to help improve bilgewater treatment and management.

Microelectrode Investigation on the Corrosion Initiation at Lead-Brass Galvanic Interfaces in Chlorinated Drinking Water

In this study, the effects of pH, dissolved inorganic carbon (DIC), and flow on changes in surface chemistry (pH, dissolved oxygen, and free chlorine) of lead-brass joints at initial stages of corrosion were investigated using microelectrodes. Surface measurements showed that the water chemistry at the metal surfaces was highly heterogeneous. At pH 7 and during water stagnation, local pH difference between anodic (leaded-solder) and cathodic (brass) regions differed by as much as 7.5 pH units. High DIC water under the water flowing condition showed minimal pH changes on the surface, whereas in low DIC water, a pH range of 7.6-5.4 (ΔpH 2.2) was observed over the surface. Free chlorine consumption near the lead-brass surface was greater under stagnation, regardless of bulk pH. It was also found that flow can move the low pH plume that originated at the anode. Overall, this study provides direct evidence for highly localized galvanic corrosion in a chlorinated drinking water environment.

Determination of monochloramine dissipation kinetics in various surface water qualities under relevant environmental conditions - Consequences regarding environmental risk assessment

A total 190 experiments were performed to study the dissipation kinetics of monochloramine (NH₂Cl, CAS no 10599-90-3) in surface water samples from six rivers (Loire, Rhône, Meuse, Garonne, Seine and Moselle) and an artificial reservoir (Mirgenbach), all located in France. Experiments were conducted in an open reactor, under relevant controlled environmental conditions. The impact of various parameters such as initial NH₂Cl concentration, temperature, pH, presence of sediments, sampling site and collection period was investigated. It was found that NH₂Cl dissipated rapidly without any lag phase, and that decay follows an apparent first-order kinetics (r² > 0.99). Presence of sediment greatly accelerated decay. Half-lives were generally <1 h in river water in presence of natural sediment, but of several hours without sediment. The impact of pH was low for the normal river water pH range. However, increase in temperature significantly accelerated decay. The combination of high initial NH₂Cl concentrations and elevated temperatures generally gives half-lives similar to those obtained at lower temperatures and lower concentrations. Short half-lives (0.06 to 1.50 h) were found in all the surface waters examined, regardless of geographic location of sampling site or collection period, indicating no temporal or site-specific effects on NH₂Cl dissipation. Decay was slightly faster at lower initial concentrations, which supports extrapolation of half-lives measured in this study to a wide range of environmental concentrations. It can thus be assumed that NH₂Cl degradation in river and reservoir waters is mainly determined by presence of sediments and temperature.

Silica-quaternary ammonium "Fixed-Quat" nanofilm coated fiberglass mesh for water disinfection and harmful algal blooms control

Intensification of pollution loading worldwide has promoted an escalation of different types of disease-causing microorganisms, such as harmful algal blooms (HABs), instigating detrimental impacts on the quality of receiving surface waters. Formation of unwanted disinfection by-products (DBPs) resulting from conventional disinfection technologies reveals the need for the development of new sustainable alternatives. Quaternary Ammonium Compounds (QACs) are cationic surfactants widely known for their effective biocidal properties at the ppm level. In this study, a novel silica-based antimicrobial nanofilm was developed using a composite of silica-modified QAC (Fixed-Quat) and applied to a fiberglass mesh as an active surface via sol-gel technique. The synthesized Fixed-Quat nanocoating was found to be effective against E. coli with an inactivation rate of 1.3 × 10^-3 log reduction/cm min. The Fixed-Quat coated fiberglass mesh also demonstrated successful control of Microcystis aeruginosa with more than 99% inactivation after 10 hr of exposure. The developed antimicrobial mesh was also evaluated with wild-type microalgal species collected in a water body experiencing HABs, obtaining a 97% removal efficiency. Overall, the silica-functionalized Fixed-Quat nanocoating showed promising antimicrobial properties for water disinfection and HABs control, while decreasing concerns related to DBPs formation and the possible release of toxic nanomaterials into the environment.

Impact of disinfectant on bacterial antibiotic resistance transfer between biofilm and tap water in a simulated distribution network

Bacterial antibiotic resistance (BAR) is profoundly important to human health, but the environmental reservoirs of resistance determinants are poorly understood. BAR of biofilm and tap water were analyzed by using a water distribution simulator where different doses of chlorine and chloramine were used in this study. The results revealed that the disinfectants (≥2 mg/L) suppressed antibiotic resistant bacteria (ARB) in tap water and biofilms, while disinfected water and biofilms had a high relative abundance of ARB. The difference of ARB concentration and ARB percentage between the samples obtained from a disinfected pipeline and a non-disinfected pipeline became smaller over time. Because the water supply system is a unidirectional process, it is unclear how planktonic bacteria in water transfer BAR over time, although biofilm is suspected to play a role in this process. Compared with the biofilm samples without disinfectant, the disinfected biofilm had lower ICC and HPC/ICC percentage, lower AOC and AOC/TOC percentage, indicating that the disinfectant inhibited the bacteria growth in biofilm, and the disinfected biofilm had high proportion of non-culturable bacteria and low biodegradability, which affected BAR in biofilms. High throughput sequencing showed that in biofilms, the relative abundance of genera (uncultured_f_Rhodocyclaceae, Brevundimonas, and Brevibacillus in chlorinated systems, and Brevundimonas, Brevibacillus in chloraminated systems) with multiple antibiotic resistance and high abundance (up to 78.5%), were positively associated with disinfectant concentration and ARB percentage. The major prevalent genera in biofilms were also detected in tap water, suggesting that biofilm growth or biofilm detachment caused by external environmental factors will allow the movement of biofilm clusters with higher ARB concentration and percentage into bulk water, thereby increasing the antibiotic resistance of bacteria in tap water.

Linking microbial respiratory activity with phospholipid fatty acid of biofilm from full-scale bioreactors

Deficiency of researches on biotic community-driven biofilm activity makes biofilm regulation lack of quantitative response for decades. Based on three full-scale aerobic bioreactors in wastewater treatment plants, this study for the first time linked microbial respiratory activity with phospholipid fatty acid (PLFA) of biofilm developed on fixed and suspended carriers. Results showed that C16:00, C18:00, C16:1, ω7c, C18:1, ω7c, C12:00 and C18:1ω9c were top six biomarkers of PLFA among different sources of samples and Gram-negative bacteria (G-) was more abundant than Gram-positive bacteria (G+) with average G-/G+ of 2.98. It's interesting to find defective revealing of PLFA-based biofilm activity by specific oxygen uptake rate (SOUR). Further modeling indicated that C16:00 achieved the optimal quantitative response to STOUR with the best model of composite, growth, or exponential curve (R² = 0.416, p = 0.005). This research was promising to provide important reference for biofilm regulation and accurate control of biofilm-based process.

Using upstream oxidants to minimize surface biofouling and improve hydraulic performance in GAC biofilters

The combination of biological growth and particle loading can adversely affect hydraulic performance in drinking water biofilters. In this study, upstream oxidant addition was used to distribute biologically-derived filter clogging in granular activated carbon (GAC) biofilters. Oxidant penetration was assessed during pilot-scale operation and backwashing of dual media (GAC/sand) and multimedia (GAC/anthracite/sand) biofilters. Influent chlorine (HOCl), monochloramine (NH₂Cl), and hydrogen peroxide (H₂O₂) residuals were optimized to react with the GAC surface in the upper portion of the filter media bed (depth < 0.5 m) to attenuate biomass development. As the oxidant residual was quenched by surface-mediated reaction with the filter media, biomass growth was promoted deeper in the filter bed (depth > 0.5 m). The oxidant-induced effects on biomass and hydraulic performance were monitored through measurements of adenosine triphosphate (ATP) and head loss accumulation at different media depths. Addition of oxidants (e.g., 0.6 mg Cl₂/L HOCl) could decrease terminal head loss by 20% in dual media filters and 40% in multimedia filters. These hydraulic benefits were achieved without significantly affecting removal of assimilable organic carbon (AOC), total organic carbon (TOC), turbidity, and particle counts. Oxidant type, residual concentration, media type, media age, and media depth influenced the passage of oxidant residuals and distribution of filter biomass. When oxidants were added during backwashing, oxidant residual was quenched through the bed depth from a combination of reactions with GAC media and biofilm degradation. This attenuation of residual oxidant may prevent the oxidant residual from penetrating the entire bed depth, potentially compromising backwashing objectives.