The Hidden Microplastics: New Insights and Figures from the Thorough Separation and Characterization of Microplastics and of Their Degradation Byproducts in Coastal Sediments

Occurrence, detection and ecotoxicity of microplastics in selected environments-a systematic appraisal

Microplastics (MPs) are being released into the environment in large quantities, especially in less developed parts of the world. This group of pollutants is mostly leached into the environment through heavy plastic dumpsites, pharmaceutical and personal care product containers, hospital wastes, plastic package accessories, and litter from food packaging. Consequently, these compounds are found in different compartments of the ecosystem, such as soils, sediments, biota, and, surprisingly, drinking water. The present study systematically appraised recent studies on MP pollution in the Asian and African environments. It also summarized the trends in the methods for the environmental monitoring of MPs and the removal strategies that have been employed. From the data gathered, the two key instrumentations involved are the microscopes for visualization and the Fourier transform-infra-red (FT-IR) spectrometer to classify or characterize the MPs. Based on the surveyed works of literature, China and South Africa have relatively more information on MP contamination of diverse matrices within their countries. Meanwhile, studies on the status of MP contamination should be conducted across all countries. Hence, this study becomes an eye-opener regarding the commencement of research works on the MP contamination of the environment, especially in other Asian and African countries with little or no information. Furthermore, the literature on ecotoxicity studies of MPs was investigated to ascertain the toxic nature of these compounds. This aspect of research is vital because it serves as a prerequisite for the remediation of these compounds. Microplastics have been declared lethal to biotic components, so all hands must be on deck to continuously remove them from the environment.

Effect of biodegradable and conventional microplastic exposure in combination with seawater inundation on the coastal terrestrial plant Plantago coronopus

Coastal ecosystems face a multitude of pressures including plastic pollution and increased flood risk due to sea level rise and the frequency and severity of storms. Experiments seldom examine multiple stressors such as these, but here we quantified the effect of microplastics (polyethylene terephthalate (PET): a durable plastic and polybutylene adipate terephthalate (PBAT): a biodegradable polymer), in combination with simulated seawater inundation on the coastal species Plantago coronopus. After 35-days exposure to plastic (0.02 g.Kg-1, <300 μm diameter), P. coronopus were flooded to pot height with artificial seawater for 72-h, drained and grown for a further 24-days. Plant mortality, necrosis and photosynthetic efficiency (Fv/Fm) were recorded throughout, with root:shoot biomass and scape production (flower stalks) quantified at harvest. There were significant interactions between microplastics and seawater on the root:shoot ratio; a measure of resource allocation. The allocation to belowground biomass increased significantly under the PET + inundation treatment compared to the PBAT + inundation and the no plastic + inundation treatments, with potential consequences on the capture of water, nutrients and sunlight, which can affect plant performance. Plant necrosis significantly increased, and Fv/Fm declined as a result of seawater inundation. While not significant, plant Fv/Fm responses were influenced by microplastics (17% and 7% reduction in PBAT and PET exposure respectively compared to the no plastic control). Plants mediated this stress response with no discernible treatment-specific effects detected in Fv/Fm 14-days after seawater introduction. Plastic exposure significantly influenced potential reproductive output, with lower average scape numbers across PBAT treatments, but higher in PET treatments. This study highlights the complex interactions and potential for microplastics to present an elevated risk when in combination with additional stressors like seawater flooding; establishing the threat presented to ecosystem resilience in a changing world is a priority.

Natural iron-containing minerals catalyze the degradation of polypropylene microplastics: a route to self-remediation learnt from the environment

Virgin and environmentally aged polypropylene (PP) micropowders (V-PP and E-PP, respectively) were used as reference microplastics (MPs) in comparative photo- and thermo-oxidative ageing experiments performed on their mixtures with a natural ferrous sand (NS) and with a metal-free silica sand (QS). The ferrous NS was found to catalyze the photo-oxidative degradation of V-PP after both UV and simulated solar light irradiation. The catalytic activity in the V-PP/NS mixture was highlighted by the comparatively higher fraction of photo-oxidized PP extracted in dichloromethane, and the higher carbonyl index of the bulk polymer extracted with boiling xylene, when compared with the V-PP/QS mixture. Similarly, NS showed a catalytic effect on the thermal degradation (at T = 60 °C) of E-PP. The results obtained indicate that, under suitable environmental conditions (in this case, an iron-containing sediment or soil matrix, combined with simulated solar irradiation), the degradation of some types of MPs could be much faster than anticipated. Given the widespread presence of iron minerals (including the magnetite and iron-rich serpentine found in NS) in both coastal and mainland soils and sediments, a higher than expected resilience of the environment to the contamination by this class of pollutants is anticipated, and possible routes to remediation of polluted natural environments by eco-compatible iron-based minerals are envisaged.

Characterization of microplastic-derived dissolved organic matter in freshwater: Effects of light irradiation and polymer types

This study investigated the impacts of light irradiation and polymer types on the leaching behavior of dissolved organic matter (DOM) from microplastics (MPs) in freshwater. Polypropylene had the highest leaching capacity of DOM after photoaging, followed by polystyrene (PS), polyamide (PA) and polyethylene terephthalate (PET). While similarly low levels of DOM were observed in the remaining 5 MP suspensions under UV irradiation and in almost all MP suspensions (except PA) under darkness. These suggest that the photooxidation of some buoyant plastics may influence the carbon cycling of nature waters. Among 9 MP-derived leachates, PET leachates had the highest chromophoric DOM concentration and aromaticity, probably owing to the special benzene rings and carbonyl groups in PET structures and its fast degradation rate. Protein-like substances were the primary fluorescent DOM in MP suspensions (except PS), especially in darkness no other fluorescent substances were found. Considering the bio-labile properties of proteins together, MPs regardless of floating or suspended in an aquatic environment may have prevalent long-term effects on microbial activities. Besides, from monomers to hexamers with newly formed chemical bonds were identified in UV-irradiated MP suspensions. These results will contribute to a deep insight into the potential ecological effects related to MP degradation.

Microplastics as potential barriers to ultraviolet light emitting diode inactivation of MS2 bacteriophage: Influence of water-quality parameters

Microplastics have emerged as a concerning contaminant in drinking water sources, potentially interacting with pathogenic microorganisms and affecting the disinfection processes. In this study, MS2 was selected as an alternative for the human enteric virus. The influence of microplastics polyvinylchloride (MPs-PVC) on ultraviolet light emitting diode (UV-LED) inactivation of MS2 was investigated under various water chemistry conditions, such as MPs-PVC concentration, pH, salinity, and humic acid concentration. The results revealed that higher concentrations of MPs-PVC led to the reduced inactivation of MS2 by decreased UV transmittance, hindering the disinfection process. Additionally, the inactivation efficiency of MS2 in the presence of MPs-PVC was influenced by pH, and acidic solution (pH at 4, 5, and 6) exhibited higher efficiency compared to alkaline solution (pH at 8 and 9) and neutral solution (pH at 7). The low Na+ concentrations (0-50 mM) had a noticeable effect on MS2 inaction efficiency in the presence of MPs-PVC, while the addition of Ca2+ posed an insignificant effect due to the preferential interaction with MPs-PVC. Furthermore, the inactivation rate of MS2 initially increased and then decreased with increasing the concentration of humic acid, which was significantly different without MPs-PVC. These findings shed light on the complex interactions between MPs-PVC and MS2 in the UV-LED disinfection process under various water-quality parameters, contributing to drinking water safety and treatment.

Study on the release of microplastic particles with different particle sizes in sediments caused by wave-induced liquefaction

Every year, almost 1.15-2.41 million tons of plastic from terrestrial rivers undergo fragmentation under certain conditions and settle in the estuarine delta and shallow marine shelf areas, making this region a "sink" for land-based microplastics. Owing to its fast deposition rate, relatively soft sediment bed, and shallow water depth, the estuarine delta region is prone to liquefaction under high wind and wave conditions. This could potentially release deeply buried microplastic particles during the liquefaction process, posing further threats to marine ecology and human health. To investigate this phenomenon, laboratory experiments were conducted using a water tank to simulate wave-induced liquefaction of sediment beds. The results showed that under the influence of wave-induced liquefaction, 56.2 % of microplastic particles were released back into the sediment surface, with larger particles being released to a greater extent. Based on these experimental results, this study also analyzed and discussed the release rate and mechanisms of microplastic particles from sediment during wave-induced liquefaction, estimating that the maximum release rate of microplastic particles under the experimental conditions could reach 0.34 mm/min.

Insight into the chemical transformation and organic release of polyurethane microplastics during chlorination

The ubiquitous occurrence of microplastics in water and wastewater is a growing concern. In this study, the chemical transformation and organic release of virgin and UV-aged thermoplastic polyurethane (TPU) polymers during chlorination were investigated. As compared to virgin TPU polymer, the UV-aged TPU polymer exhibited high chlorine reactivity with noticeable destruction on its surface functional groups after chlorination, which could be ascribed to the UV-induced activation of hard segment of TPU backbone and increased contact area. The concentrations of leached organics increased by 1.6-fold with obviously high abundances of low-molecular-weight components. Additives, monomers, compounds relating to TPU chain extension, and their chlorination byproducts contributed to the increased organic release. Meanwhile, the formation of chloroform, haloacetic acids, trichloroacetaldehyde, and dichloroacetonitrile increased by 3.8-, 1.7-, 4.9-, and 2.4-fold, respectively. Two additives and six chlorination byproducts in leachate from chlorinated UV-aged TPU were predicted as highly toxic, e.g., butyl octyl phthalate, palmitic acid, 2,6-di-tert-butyl-1,4-benzoquinone, and chlorinated aniline. Evaluated by human hepatocarcinoma cells, the 50% lethal concentration factor of organics released from chlorinated UV-aged TPU was approximately 10% of that from its virgin counterpart, indicating a substantially increased level of cytotoxicity. This study highlights that the release of additives and chlorination byproducts from the chemical transformation of UV-aged microplastics during chlorination may be of potentially toxic concern.

Shape- and polymer-considered simulation to unravel the estuarine microplastics fate

Environmental microplastics (MPs) constitute various sizes, polymers, and shape components. In estuaries, such differences are related to the reliability of assessing the seaward fate of MPs, aggregation hotspots, and ecological risks. This study sets the MP particle mass gradient using the shape factor and size probability density function to categorically estimate the MP load in the surface layer of the Yangtze River Estuary (YRE), which is the largest contributor of plastics to the sea. During the high plastic input period in July, the optimized estimated MP load through the surface layer of the YRE was 9766 kg/month, which was overestimated by 821 kg/month based on the empirical average particle mass. While tracking MP transport classified by shape and polymer type, the resuspension of MPs that accumulate in the intertidal zone cannot be neglected. The average relative error of the simulation was as low as 19.6% after including the abovementioned factors. Finally, the simulation results of the sensitive regions were extracted to assess the new MP risk index, which considers shape, abundance, and polymer type. By introducing these essential tools, this study helps to understand the fate of riverine MPs entering estuaries, where valuable opportunities for removing MPs exist before they spread to the oceans.

Identification and quantification of polystyrene microplastics in marine sediments facing a river mouth through NMR spectroscopy

Accurate identification and quantification of microplastic pollution in marine sediments are crucial for assessing their ecological impact. In this study, we explored the potential of Nuclear Magnetic Resonance (NMR) spectroscopy as an analytical tool for the analysis of microplastics in complex environmental matrices such as marine sediments. Two common plastic polymers, polystyrene (PS) and acrylonitrile butadiene styrene (ABS), were investigated. The marine sediments facing the Tiber River mouth (Italy) were collected according to a bathymetric gradient. Results demonstrated the successful detection and quantification of PS in all sediment samples (within a range of 12.3-64.6 μg/L), while no ABS significant signals were found. An increment trend with depth was observed in the PS signal, relatable to its physicochemical properties and the Tiber River plume hydrodynamic characteristics. The NMR's non-destructive nature and minimal sample preparation represent a promising avenue for standardizing protocols to assess the microplastic distribution and impact in marine sediments.

Novel CuMgAlTi-LDH Photocatalyst for Efficient Degradation of Microplastics under Visible Light Irradiation

Microplastics (MPs) in the water system could easily enter the human body and pose a potential threat, so finding a green and effective solution remains a great challenge. At present, the advanced oxidation technology represented by photocatalysis has been proven to be effective in the removal of organic pollutants, making it a feasible method to solve the problem of MP pollution. In this study, the photocatalytic degradation of typical MP polystyrene (PS) and polyethylene (PE) by a new quaternary layered double hydroxide composite photomaterial CuMgAlTi-R400 was tested under visible light irradiation. After 300 h of visible light irradiation, the average particle size of PS decreased by 54.2% compared with the initial average particle size. The smaller the particle size, the higher the degradation efficiency. The degradation pathway and mechanism of MPs were also studied by GC-MS, which showed that PS and PE produced hydroxyl and carbonyl intermediates in the process of photodegradation. This study demonstrated a green, economical, and effective strategy for the control of MPs in water.

Microplastics in Sewage Sludge: A review

Microplastics (MPs) represent a serious problem for the environment and for this reason they have been studied in many articles, especially their presence in aquatic environments and soils. MPs have been found in wastewater and sewage sludge from municipal wastewater treatment plants (WWTPs). Most part of the published works have focused on the detection and elimination of MPs in the water line and several reviews have been published in the last years. In addition, the application of sewage sludge produced from WWTPs for agricultural use is known to be a primary source of MPs in soils. However, in the scientific literature less attention has been paid to the sludge and little is known about MPs fate when it is applied in agriculture. This work aims to give a global revision on the most used techniques to identify and detect MPs in sludges, their characteristics and incidence, their effect on sludge treatments and their impact on the environment. As far as we know, there are no standardized protocols for MPs extraction from soil and the possible repercussions on the cultivation of plants are not known. This review evidences that more studies are necessary to stablished standardized protocols and decipher the main mechanisms and the effects of MPs from sewage sludge in the environment.

Microplastic pollution in the sediments of interconnected lakebed, seabed, and seashore aquatic environments: polymer-specific total mass through the multianalytical "PISA" procedure

The total mass of individual synthetic polymers present as microplastic (MP < 2 mm) pollutants in the sediments of interconnected aquatic environments was determined adopting the Polymer Identification and Specific Analysis (PISA) procedure. The investigated area includes a coastal lakebed (Massaciuccoli), a coastal seabed (Serchio River estuarine), and a sandy beach (Lecciona), all within a natural park area in Tuscany (Italy). Polyolefins, poly(styrene) (PS), poly(vinyl chloride) (PVC), polycarbonate (PC), poly(ethylene terephthalate) (PET), and the polyamides poly(caprolactame) (Nylon 6) and poly(hexamethylene adipamide) (Nylon 6,6) were fractionated and quantified through a sequence of selective solvent extractions followed by either analytical pyrolysis or reversed-phase HPLC analysis of the products of hydrolytic depolymerizations under acidic and alkaline conditions. The highest concentrations of polyolefins (highly degraded, up to 864 µg/kg of dry sediment) and PS (up to 1138 µg/kg) MPs were found in the beach dune sector, where larger plastic debris are not removed by the cyclic swash action and are thus prone to further aging and fragmentation. Surprisingly, low concentrations of less degraded polyolefins (around 30 µg/kg) were found throughout the transect zones of the beach. Positive correlation was found between polar polymers (PVC, PC) and phthalates, most likely absorbed from polluted environments. PET and nylons above their respective LOQ values were found in the lakebed and estuarine seabed hot spots. The pollution levels suggest a significant contribution from riverine and canalized surface waters collecting urban (treated) wastewaters and waters from Serchio River and the much larger Arno River aquifers, characterized by a high anthropogenic pressure.

Influence and mechanism of the vertical distribution of Cu, Cd, and Pb at a simulated sediment-water interface covered by degradable microplastics

Currently research on microplastics in the environment focuses on non-degradable microplastics with little attention to research on degradable microplastics. This study involved a 400-day experiment in a simulated lake environment of three degradable microplastics, poly(ε-caprolactone) (PCL), polybutylene succinate (PBS), and poly(butylene adipate terephthalate) (PBAT) at the sediment water interface. Results showed that (1) for the three microplastics, Cd concentration showed a large change from 0 to 20 mm in the water above the sediment interface; the adsorption of Cd, Pb, and Cu in a diffusive gradients thin film (DGT) device are the highest in PBAT micro plastic, followed by PCL and then PBS. (2) Diffuse flux (J) of the three degradable microplastics indicated that Cu, Cd, and Pb in the sediments come from the overlying water that was added to the simulation experiment. (3) Fourier transform infra-red spectroscopy (FTIR) for investigating the adsorption capacity of Cu, Cd, and Pb in the three degradable microplastics showed the absorption peak intensity increased and widened, and some adsorption sites changed. (4) Correlation analysis showed that the factors which most influenced diffusion flux for both water and sediments are oxidation-reduction potential (ORP), followed by organic matter (OM), pH, and electrical conductivity (EC).

Masses and size distributions of mechanically fragmented microplastics from LDPE and EPS under simulated landfill conditions

Landfills contain significant amounts of plastic waste (PW) and microplastics (MPs). However, the contributions of various PW fragmentation processes to the quality and quantity of MPs in landfills are unclear. In this study, LDPE and EPS pieces were mixed with sand to simulate landfilled solid waste, which experienced one-dimensional abiotic compression under vertical stress of 100-800 kPa for 1-300 days. The generated MPs were stained and quantified with a fluorescent microscope. The numbers and masses of the fragmented MPs increase with the increasing compression stress and duration following linear or exponential trends. EPS has a lower stiffness than LDPE, thus generates more MPs under the same compression conditions. Stress-dependent and time-dependent fragmentation mechanisms are distinguished, the former is driven by sand-plastic porosity reduction and the latter is due to microscopic interfacial creep with minimal porosity reduction. Most of the mechanically fragmented MPs have diameters < 100 µm. The MPs size distributions follow an established power-law model, which are dependent on stress, duration, porosity reduction, and fragmentation mechanism. Our results serve as conservative estimations on long-term MPs generation in real landfills, which provide confirmative and quantitative evidence to support the previous studies reporting the varied MPs abundances and properties within landfills.

Understanding the underestimated: Occurrence, distribution, and interactions of microplastics in the sediment and soil of China, India, and Japan

Microplastics (MPs) are non-biodegradable substances that can sustain our environment for up to a century. What is more worrying is the incapability of modern technologies to annihilate MPs from om environment. One ramification of MPs is their impact on every kind of life form on this planet, which has been discussed ahead; that is why these substances are surfacing in everyday discussions of scholars and researchers. This paper discusses the overview of the global occurrence, abundance, analysis, and remediation techniques of MPs in the environment. This paper primarily reviews the event and abundance of MPs in coastal sediments and agricultural soil of three major Asian countries, India, China, and Japan. A significant concentration of MPs has been recorded from these countries, which affirms its strong presence and subsequent environmental impacts. Concentrations such as 73,100 MPs/kg in Indian coastal sediments and 42,960 particles/kg in the agricultural soil of China is a solid testimony to prove their massive outbreak in our environment and require urgent attention towards this issue. Conclusions show that human activities, rivers, and plastic mulching on agricultural fields have majorly acted as carriers of MPs towards coastal and terrestrial soil and sediments. Later, based on recorded concentrations and gaps, future research studies are recommended in the concerned domain; a dearth of studies on MPs influencing Indian agricultural soil make a whole sector and its consumer vulnerable to the adverse effects of this emerging contaminant.

Occurrence, characteristics, and removal of microplastics in wastewater treatment plants located on the Moroccan Atlantic: The case of Agadir metropolis

Wastewater treatment plants (WWTPs) are some of the main sources of microplastics (MPs) in the environment. However, studies on the occurrence and removal efficiency of MPs in WWTPs are still scarce, especially in African countries. Thus, the aim of this work was to study the abundance of MPs in the influent and effluent of two WWTPs (Aourir and M'zar) from the Agadir metropolis (Moroccan Atlantic). The two WWTPs receive different wastewater inputs (domestic and industrial). In addition, the impacts of seasonality on the fate and removal efficiency were investigated. The results showed that the MPs abundance in the wastewater decreased from 188 MPs/L in the influent to 50 MPs/L in the effluent for Aourir WWTP (domestic inputs); while the abundance was greater in the M'zar WWTP (urban and industrial inputs) recording a mean value of 519 MPs/L and 86 MPs/L in the influent and effluent, respectively. MPs collected in the Aourir WWTP ranged from 290 to 3200 μm, while MPs from the M'zar WWTP, ranged from 330 to 4200 μm. Overall, the size range of 100-500 μm was the most abundant for both WWTPs. Fibers were the highest MPs morphotype found, followed by fragments. MP colors were mainly red, black, blue, and transparent for both treatment plants. Additionally, FTIR spectroscopy showed the presence of eight different polymers, mainly polyethylene (PE), polypropylene (PP), and polystyrene (PS). Seasonal variation analysis showed that MPs abundance in summer was significantly higher compared to other seasons. However, the comparison of the removal efficiency (RE) between the different seasons indicated that the winter season (74 %) recorded the highest RE for Aourir WWTP. Conversely, spring (87 %) recorded the highest RE for M'zar WWTP. SEM/EDX micrographs showed different degrees of weathering and chemical elements adhering to the surface of the MPs. The findings of the current study will serve as a baseline for future considerations about management strategies, wastewater reuse, as well as the understanding of the occurrence of microplastic pollution along the marine ecosystems of Morocco.

Simultaneous quantification of microplastic particles by non-deuterated (NoD) 1H-qNMR from samples comprising different polymer types

Facing microplastic contamination and thereby its impacts on the environment and health will probably be one of the most concerning challenges in our immediate future. Yet, data on these emerging pollutants are still scarce in many aspects leading to the ongoing development and expansion of analytical procedures and approaches. In recent years, despite being used formerly only for qualitative aspects, nuclear magnetic resonance spectroscopy (NMR) was introduced for the quantification of microplastic particles. By the combination of linear regression procedures, internal standards and the integration of proton NMR, the so-called qNMR method allows mass-based quantification of microplastics in a limited amount of time and independent of particle size. Based on this approach, further optimization through the simultaneous dissolution and quantification of multiple polymers is investigated. Individual requirements, known issues and considerations will be demonstrated along with additional possibilities for five polymers: polystyrene (PS), butadiene rubber (BR), polyvinylchloride (PVC), polyethylene terephthalate (PET) and polyamide (PA). The applicability of homopolymer-based calibrations is demonstrated for both the quantification of multiple homopolymers dissolved in a shared solvent system and the quantification of copolymers; for example, a styrene-butadiene copolymer (SBR). Linearities and limits of detection and quantification as well as precision and accuracy comparable to those of solely measured microplastic particles are achieved. The improvement significantly reduces the preparation and measurement time in combination with lowered costs. In addition, enhanced reliability was achieved by implementing hexamethyldisiloxane (HMDSO) as an internal standard in NoD measurements, replacing dichloromethane (DCM).

Multi-Analytical Approach to Characterize the Degradation of Different Types of Microplastics: Identification and Quantification of Released Organic Compounds

Microplastics and nanoplastics represent one of the major environmental issues nowadays due to their ubiquitous presence on Earth, and their high potential danger for living systems, ecosystems, and human life. The formation of both microplastics and nanoplastics strongly depends on both the type of pristine materials and the degradation processes related to biological and/or abiotic conditions. The aim of this study is to investigate the effect of two of the most relevant abiotic parameters, namely temperature and light, taken under direct control by using a Solar box, on five types of reference polymers: high density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP), polystyrene (PS), and polyethylene terephthalate (PET). A multi-analytical approach was adopted to investigate in detail the first steps of plastics degradation. Samples of plastic materials at different degradation times were analyzed by means of ¹H NMR spectroscopy and thermal desorption gas chromatography mass spectrometry (TD-GC-MS) technique. Several minor molecular species released during degradation were consistently identified by both techniques thus providing a comprehensive view of the various degradation products of these five types of microplastics.

Release of millions of micro(nano)plastic fragments from photooxidation of disposable plastic boxes

The widespread use of disposable plastic boxes is exacerbating the dangers of microplastics (MPs); however, little is known about the fragmentation behavior of MPs during aging. In this study, the dynamic evolution on the release of micro(nano)plastics and photoaging properties of two disposable plastic boxes (polypropylene (PP) and polystyrene (PS)) were investigated under light irradiation and mechanical abrasion. Results showed that the weight of PP and PS was decreased by 53 % and 100 %, respectively after 60 d of ultraviolet irradiation (UV60). Moreover, a large number of fragmented particles were produced from the combined light irradiation and abrasion, with 0.142 ± 0.006 and 0.141 ± 0.013 million micro(nano)plastics/mL particles from PP and PS boxes, respectively, and the nanometer range (<100 nm) accounted for 70.8 % and 46.8 %. The correlation model of the average size or alteration time versus carbonyl index (CI) was developed, which indicated that the fragmentation behavior was mainly related to the photooxidation, though mechanical abrasion also played a certain enhancing role. Additionally, PS was susceptible to the fragmentation and photooxidation compared to PP possibly since the phenyl ring of PS was more vulnerable to UV attack than the methyl of PP. The findings of this study clarify the dynamic fragmentation process of micro(nano)plastics of disposable plastic boxes and provide useful information to access environmental fate of MPs more holistically.

Opposite impact of DOM on ROS generation and photoaging of aromatic and aliphatic nano- and micro-plastic particles

Dissolved organic matter (DOM) plays a significant role in the photochemical behavior of nano- and micro-plastic particles (NPs/MPs). We investigated the influence of DOM on the mechanism on the photoaging of NPs/MPs with different molecular structures under UV₃₆₅ irradiation in water. DOM components used in this study are mainly humic acid and fulvic acid. The results showed that DOM promoted the weathering of aliphatic NPs/MPs (polypropylene (PP)), but inhibited or had only a minor effect on the photoaging of aromatic NPs/MPs (polystyrene (PS) NPs/MPs, carboxyl-modified PS NPs, amino-modified PS NPs, and polycarbonate MPs). NPs with a large surface area may adsorb sufficient DOM on the particle surfaces through π-π interactions, which competes with NPs for photon absorption sites, thus, can delay the photoaging of PS NPs. Aromatic MPs may release phenolic compounds that quench •OH, thereby weakening the photoaging process. For aliphatic MPs, the detection of peracid, aldehyde, and ketone groups on the polymer surface indicated that DOM promoted weathering of PP MPs, which was primarily because the generation of •OH due to DOM photolysis may attack the polymer by C-C bond cleavage and hydrogen extraction reactions. This study provides insight into the UV irradiation weathering process of NPs/MPs of various compositions and structures, which are globally distributed in water.

Magnetic Extraction of Weathered Tire Wear Particles and Polyethylene Microplastics

Magnetic extraction offers a rapid and low-cost solution to microplastic (MP) separation, in which we magnetize the hydrophobic surface of MPs to separate them from complex environmental matrices using magnets. We synthesized a hydrophobic Fe-silane based nanocomposite (Fe@SiO₂/MDOS) to separate MPs from freshwater. Pristine and weathered, polyethylene (PE) and tire wear particles (TWP) of different sizes were used in the study. The weathering of MPs was performed in an accelerated weathering chamber according to ISO 4892-2:2013 standards that mimic natural weathering conditions. The chemical properties and morphology of the Fe@SiO₂/MDOS, PE and TWP were confirmed by Fourier transform infrared spectroscopy and Scanning electron microscopy, respectively. The thermal properties of PE and TWP were evaluated by Thermogravimetric analysis. Using 1.00 mg of Fe@SiO₂/MDOS nanocomposite, 2.00 mg of pristine and weathered PE were extracted from freshwater; whereas, using the same amount of the nanocomposite, 7.92 mg of pristine TWP and 6.87 mg of weathered TWP were extracted. The retrieval of weathered TWP was 13% less than that of pristine TWP, which can be attributed to the increasing hydrophilicity of weathered TWP. The results reveal that the effectiveness of the magnetic separation technique varies among different polymer types and their sizes; the weathering of MPs also influences the magnetic separation efficiency.

Qualitative characterisation and identification of microplastics in a freshwater dam at Gauteng Province, South Africa, using pyrolysis-gas chromatography-time of flight-mass spectrometry (Py-GC-ToF-MS)

Pyrolysis GC-ToF-MS-based analytical study was employed in the identification of microplastics (MPs) in the freshwater of a dam Rietvlei (RTV) located at Gauteng Province, South Africa. These MPs extracted in five locations of the dam were found to contain five different plastic polymeric constituents including PE, PS, PA, PVC and PET along with phthalate esters and fatty acid (amides and esters) derivatives as additives. Based on the fragmented pyrolyzate products, the contribution of plastic polymers and additives was 74% and 26% respectively. Among polymers, PA was dominant with 52% followed by PVC (16%) and others (13%) such as PE, PET and PS in MPs. Scanning electron micrographs of MPs in this aquatic body displayed the rough and fibrous typed patterns. The residual mass of 8-14% was left after the thermal degradation of MPs in RTV samples in the temperature range of 500-550 °C. The results of thermogravimetry (TGA) and energy-dispersive (EDS) analyses are mutually dependent and coherent to each other by way of demonstrating the presence of various inorganic compounds in the form of additives and/or sorbates. The lessened intensities of carbonyl stretching in PA (1625 cm^-1) and PET (1725 cm^-1) type of MPs attributed the occurrence of degradation and weathering in this aquatic system. The possible causes to the contamination of MPs in this freshwater are the located industries and poor waste management strategies being practised in this densely populated city. Based on the industry, waste management and population perspectives, the increased contamination of MPs is very likely in this freshwater which will drastically affect the ecosystem in the near future. Based on the characterisation results, the presence of various polymers, additives and the metals in MPs is envisaged to deteriorate the aquatic life along with successive risks for the people as a consequence of bio-magnification.

Microplastics in landfill and leachate: Occurrence, environmental behavior and removal strategies

Plastic wastes buried in landfill are gradually broken and decomposed into microplastics under physical, chemical and biological effects, bringing environmental risks to the exploitation of waste resources. Landfill leachate as a potential source of environmental microplastics has not good attention. Microplastics in leachate carry toxic and harmful pollutants and antibiotic resistance genes, and these vectors pose greater risks to human and environmental health without systematic treatment. Recently, the main technologies of landfill leachate treatment process include order batch activated sludge process, membrane biological reaction process, flocculation process, combined filtration process, and constructed wetland process. However, there is still little knowledge about microplastic removal of the existing leachate treatment facilities, and some technologies to alleviate the sources of such microplastics should be timely developed. This paper systematically summarizes the occurrence of plastics, microplastics and nanoplastics in leachate and their interactive pollution with other toxic pollutants. Meanwhile, the prospects of their environmental behaviors in landfill and leachate are put forward. The microplastic removal by existing leachate treatment equipment and the limitations and challenges to upgrading process of development and implementation are also discussed. The paper can provide a scientific basis for studying the fate of microplastics in landfill and leachate.

Microplastics spatiotemporal distribution and plastic-degrading bacteria identification in the sanitary and non-sanitary municipal solid waste landfills

The municipal solid waste landfill (MSWL) is an important source of microplastics (MPs) and a huge bioreactor for plastic-degrading microorganisms (PDM). However, the spatiotemporal distribution and degradation mechanisms of MPs in MSWLs are unclear. Therefore, they were studied using the samples drilled in a sanitary landfill (SL) and an non-sanitary landfill (NSL). The results showed that there were a lot of polyethylene (PE), polypropylene (PP), polystyrene (PS), polyurethane (PU), Polyamide (PA), Polyethylene terephthalate (PET) and Polyvinyl chloride (PVC) in the landfill, and their abundance ranged from 0 to 80 items/g. The MPs surface gradually faded, became rough and even yielded cracks and holes with the landfill depth and age increase. The tiny-size MPs (< 100 µm) were the most abundant and their amount significantly increased from 28.14% to 49.13% in SL and from 24.54% to 59.51% in NSL, respectively, while large-size MPs were significantly reduced from the top to the bottom. Lysinibacillus (0.21%~67.87%) and Bacillus (0.10%~67.00%) were the dominate PDMs in SL and Candidatus_Caldatribacterium (5.06%~73.48%) was the dominate in NSL. The PE degradation was closely related to Candidatus_Cloacimonas (r = 0.688*) and Candidatus_Caldatribacterium (r = 0.680*); PS and PA were closely related to Candidatus_Contubernalis (r = 0.595*~0.705*) and PVC was closely related to Candidatus_Caldatribacterium (r = 0.547*). In addition to physical and chemical effects, biological effects can also promote the MPs formation in MSWLs.

Method Development for Separation and Analysis of Tire and Road Wear Particles from Roadside Soil Samples

A comprehensive understanding of tire and road wear particles (TRWPs) and their detection and quantification in soils is still challenged by the lack of well-set standardized methods, inherent technological inconsistencies, and generalized protocols. Our protocol includes soil sampling, size separation, and organic matter removal by using hydrogen peroxide followed by density separation and analysis. In this context, roadside soil samples from different sites in Kansas and Ohio, USA, were collected and analyzed. Tire cryogrinds analogous to TRWPs were used to evaluate various density separation media, and collected particles more than 1 mm in size were then subjected to infrared spectroscopy (IR), thermogravimetric analysis (TGA), and scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX) to confirm TRWP presence. Particles smaller than 1 mm were Soxhlet extracted, followed by gas chromatography-mass spectrometry (GC-MS) to validate the presence of tire-related intermediates. SEM-EDX validated the presence of elemental combinations (S + Zn/Na) ± (Al, Ca, Mg, K, Si) attributed to tires. Ketones, carboxylic acids, epoxies, cyclohexane, and benzothiazole sulfenamide (BTS) intermediates were the most probable tire-related intermediates observed in the roadside soil samples. Thus, this simple, widely applicable, cost-effective sample preparation protocol for TRWP analysis can assist TRWP research advancement in terrestrial environments.

Leached degradation products from beached microplastics: A potential threat to coastal dune plants

Plants play a fundamental role in maintaining coastal dunes but also accumulate littered microplastics (MPs). Migration tests suggest that naturally weathered MPs can leach out a broader range of potentially phytotoxic chemicals than virgin MPs. Thus, assessing MPs effects on plants using beached-collected particles rather than virgin ones is critically important. Here, the effects on plants of leachates from two pools of beach-collected and virgin MPs, high-density polyethylene (HDPE) and polypropylene (PP), and their mixture, were explored combining toxicity tests and chemical analyses. Phytotoxicity of MP leachates at different dilutions was evaluated under standard laboratory conditions using test species and under environmentally realistic conditions using the dune species Thinopyrum junceum. Leachates from beached PP and HDPE adversely affected all species, and the extent of these effects varied according to polymer type, concentration, and species. Virgin MPs had weaker effects than beached ones. Several potentially phytotoxic oxidized compounds were detected in water by GC/MS analysis, and their amount estimated. Results indicate that the molecular species leaching from beached MPs - at ppm concentration levels for the individual chemical species - can inhibit plant growth, and the effects of leachates from mixtures of degraded MPs can differ from those from individual polymers, highlighting the need for further investigation of MPs consequences for coastal ecosystems.

Effect of freeze-thaw cycle aging and high-temperature oxidation aging on the sorption of atrazine by microplastics

This study aims to better understand the aging characteristics of microplastics in the environment and the influence of aging microplastics on the migration and transformation of organic pollutants. In this study, polyvinyl chloride (PVC) and polyethylene (PE) were chosen as research objects, and the effects of two aging methods (freeze-thaw cycle aging and high-temperature oxidation aging) on their surface properties and atrazine (ATZ) sorption were investigated. The crystallinity of PE increased after freeze-thaw cycling and decreased after high-temperature oxidation. The freeze-thaw cycle destroys the amorphous region of PE, reducing the micropores on the PE surface and decreasing the ATZ adsorbed by PE. Although aging had no significant effect on the surface structure of PVC, it caused new oxygen-containing functional groups to be produced on the PVC surface, which reduced the ATZ adsorption capacity. These results show that the two aging modes change the surface properties of PVC and PE, thus affecting the sorption mechanism of ATZ, and provide a theoretical premise for the natural behavior and ecological chance assessment of ATZ in the presence of microplastics.

Plastics are a new threat to Palau’s coral reefs

Plastic pollution of the oceans has long been an ongoing and growing problem. Single-use plastic (plastic bags and microbeads) is responsible for most of this pollution. In recent years, studies have highlighted the importance of the size of plastic particles, and the impact of this pollution source on the environment. We determined the concentration of small marine plastics in seawater, sediments and beach sand around a pristine reef area (Republic of Palau) using very simple tools (plankton net, sieves, organic matter degradation, density separation, Nile red fluorochrome). In this study, we succeeded in detecting microplastic (MPs) particles and microplastic fibers, but also nanoplastic (NPs). These three types of particles were found in all samples with a large heterogeneity, from 0.01 to 0.09 particles L-1 and 0.17 to 32.13 particles g-1 DW for MPs in seawater, sediments and sand, respectively. Even when NPs were identified, the amounts of NPs were underestimated and varied from 0.09 to 0.43 particles L^-1 in seawater and from 1.08 to 71.02 particles g^-1 DW in sediment and sand, respectively. These variations could be attributed to the environmental characteristics of the different sites. This study shows that plastic pollution must be considered in environmental studies even in the most pristine locations. It also shows that NPs pollution is related to the amount of MPs found at the sites. To understand the effects of this plastic pollution, it is necessary that the next toxicological studies take into account the effects of this fraction that makes up the NPs.

Environmental behaviors and degradation methods of microplastics in different environmental media

Microplastics, as a group of emerging contaminants, are widely present in environmental media and have the potential to endanger the ecological environment and human health. Due to the inconsistencies and difficulties inherent in the analysis of microplastic particles, global monitoring data on the distribution of microplastics in the environment are still far from sufficient. The fate and migration of microplastics in the environment are also uncertain. Therefore, there have been increasing reviews on the distribution, biological effects, migration, and health risks of microplastics. However, reports focusing on the degradation of microplastics are still rare. Understanding and commanding the environmental behavior of microplastics are of great significance to explore the treatment of microplastic pollution. Although some preliminary studies on microplastics have been carried out, there is still an urgent need to conduct a comprehensive study on environmental behaviors and degradation methods of microplastics in different environmental media. This article summarizes the recent advances on microplastics, basically includes the distribution and ecological impact of microplastics in soil and water environments, then elaborates the migration behavior and influencing factors of microplastics, and focuses on the research progress of microplastics degradation methods. On this basis, the problems existing in the current research and the future development directions have been proposed. This review could provide a more systematic reference for the development and research of microplastics in the future.

ROS-mediated photoaging pathways of nano- and micro-plastic particles under UV irradiation

Reactive oxygen species (ROS) generation is considered as an important photoaging mechanism of microplastics (MPs) and nanoplastics (NPs). To elucidate the ROS-induced MP/NP aging processes in water under UV₃₆₅ irradiation, we examined the effects of surface coatings, polymer types and grain sizes on ROS generation and photoaging intermediates. Bare polystyrene (PS) NPs generated hydroxyl radicals (•OH) and singlet oxygen (¹O₂), while coated PS NPs (carboxyl-modified PS (PS-COOH), amino-modified PS (PS-NH₂)) and PS MPs generated fewer ROS due to coating scavenging or size effects. Polypropylene, polyethylene, polyvinyl chloride, polyethylene terephthalate and polycarbonate MPs only generated •OH. For aromatic polymers, •OH addition preferentially occurred at benzene rings to form monohydroxy polymers. Excess •OH resulted in H abstraction, CC scission and phenyl ring opening to generate aliphatic ketones, esters, aldehydes, and aromatic ketones. For coated PS NPs, •OH preferentially attacked the surface coatings to result in decarboxylation and deamination reactions. For aliphatic polymers, •OH attack resulted in the formation of carbonyl groups from peracid, aldehyde or ketone via H abstraction and CC scission. Moreover, ¹O₂ might participate in phenyl ring opening for PS NPs and coating degradation for coated PS NPs. This study facilitates understanding the ROS-induced weathering process of NPs/MPs in water under UV irradiation.

A Comparison of Different Approaches for Characterizing Microplastics in Selected Personal Care Products

Any uncertainty in determining numbers of microplastics in the environment may be a barrier to assessing their impact and may stem from various aspects of methodologies used to quantify them. We undertook a comparison of approaches to quantify and characterize microplastics in 4 personal care products. The aim was not only to determine how many particles were present but to assess any differences due to the methods used. Counting of extracted microplastics was undertaken using particle size analysis, light microscopy, and imaging flow cytometry. Micro-Fourier transform infrared spectroscopy (µ-FTIR) was used to characterize the particles in each product. The mean size distribution of microplastics differed depending on the method employed, and it was apparent that imaging flow cytometry was affected by high background noise that may require staining of plastics to overcome. The application of µ-FTIR confirmed polyethylene as the microplastic in each product. Methodological challenges encountered in the study and the literature have highlighted the need for standardization of methods for determining microplastics. Environ Toxicol Chem 2022;41:880-887. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

The micro-, submicron-, and nanoplastic hunt: A review of detection methods for plastic particles

Plastic particle pollution has been shown to be almost completely ubiquitous within our surrounding environment. This ubiquity in combination with a variety of unique properties (e.g. density, hydrophobicity, surface functionalization, particle shape and size, transition temperatures, and mechanical properties) and the ever-increasing levels of plastic production and use has begun to garner heightened levels of interest within the scientific community. However, as a result of these properties, plastic particles are often reported to be challenging to study in complex (i.e. real) environments. Therefore, this review aims to summarize research generated on multiple facets of the micro- and nanoplastics field; ranging from size and shape definitions to detection and characterization techniques to generating reference particles; in order to provide a more complete understanding of the current strategies for the analysis of plastic particles. This information is then used to provide generalized recommendations for researchers to consider as they attempt to study plastics in analytically complex environments; including method validation using reference particles obtained via the presented creation methods, encouraging efforts towards method standardization through the reporting of all technical details utilized in a study, and providing analytical pathway recommendations depending upon the exact knowledge desired and samples being studied.

Plastic leachates lead to long-term toxicity in fungi and promote biodegradation of heterocyclic dye

The hazardous effects of plastic and plastic leachates on organisms, even bacteria, have attracted widespread attention, but only a limited effort has been devoted to explore the response of fungi to plastic leachate induced by light irradiation. Here, we performed plastic leaching experiments to obtain leachates from polyethylene (PE), polyethylene terephthalate (PET) and polypropylene (PP), and optical properties of plastic leachates were analysed to determine the influence of light conditions and plastic materials on that. The effects of plastic leachates on the production of fungal enzyme and the biodegradation of heterocyclic dye by fungi were evaluated. Results indicated that the UV light greatly enhanced the release of leachates from the three plastics. Both plastic polymers and light irradiation affected the plastic-derived dissolved organic carbon (DOC) and their aromaticity, but the molecular weight of plastic leachates showed no dependency on light irradiation types, and PE was the easiest to photo age and leached more DOC. Plastic leachates had no dose-effect on the production of extracellular enzymes by fungi. PE leachates showed long-term toxicities to fungi, and no manganese peroxidase activities were detected after a 42-day incubation, while that of controls were up to 73.64 ± 8.81 U/L. However, the PE and PP leachates greatly promoted methylene blue degradation by the fungi, but PET leachates relieved the decolouration of methylene blue, probably because of the benzene ring structure in the PET monomer. Fusarium oxysporum had a stronger degradation ability than Phanerochaete chrysosporium. Our results indicate that plastic leachates can influence the production and secretion of fungi ligninolytic extracellular enzymes, and regulate the fungal degradation of heterocyclic dye.

Enhanced propagation of intracellular and extracellular antibiotic resistance genes in municipal wastewater by microplastics

Microplastics (MPs) are an emerging global concern as they are abundant in the environment and can act as vectors of various contaminants. However, whether and how MPs can be vectors of antibiotic resistance genes (ARGs), especially extracellular ARGs (eARGs), remains far from explicit. This study addresses the adsorption of both intracellular ARGs (iARGs) and eARGs by four types of MPs in municipal wastewater, and then explores the potential horizontal gene transfer of iARGs and eARGs exposed to MPs. Results indicate that though MPs significantly adsorbed both iARGs and eARGs, eARGs were adsorbed with a significantly higher fold enrichment (2.0-5.0 log versus 2.0-3.3 log) and rate (0.0056 min^-1 versus 0.0037 min^-1) than iARGs. While all four types of MPs adsorbed ARGs, polypropylene MPs showed the highest adsorption capacity for ARGs. Background constituents such as humic acid and antibiotics significantly inhibited adsorption of iARGs, but not eARGs on MPs. The presence of sodium chloride didn't significantly affect adsorption of iARGs or eARGs. The adsorption of ARGs was well explained by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) interaction energy profile. Higher eARG adsorption was attributed to a lower energy barrier between MPs and eARGs than that between MPs and iARGs. Exposure to MPs enhanced horizontal gene transfer of both iARGs and eARGs by 1.5 and 2.0 times, respectively. The improved contact potential between donors and recipients, as well as the increased cell permeability of recipients induced the improved horizontal gene transfer by MPs. This study underscores the need to address ARG propagation through adsorption to MPs.

Micro/nano-plastics occurrence, identification, risk analysis and mitigation: challenges and perspectives

Micro/nanoplastics (MP/NPs) are emerging global pollutants that garnered enormous attention due to their potential threat to the ecosystem in virtue of their persistence and accumulation. Notably, United Nations Environment Programme (UNEP) yearbook in 2014 proposed MPs as one among ten emergent issues that the Earth is facing today. MP/NPs can be found in most regularly used products (primary microplastics) or formed by the fragmentation of bigger plastics (secondary microplastics) and are inextricably discharged into the environment by terrestrial and land-based sources, particularly runoff. They are non-degradable, biologically incompatible, and their presence in the air, soil, water, and food can induce ecotoxicological issues and also a menace to the environment. Due to micro size and diverse chemical nature, MP/NPs easily infiltrate wastewater treatment processes. This communication reviews the current understanding of MP/NPs occurrence, mobility, aggregation behavior, and degradation/assimilation in terrestrial, aquatic (fresh & marine), atmospheric depositions, wetlands and trophic food chain. This communication provide current perspectives and understanding on MP/NPs concerning (1) Source, occurrence, distribution, and properties (2) Impact on the ecosystem and its services, (3) Techniques in detection and identification and (4) Strategies to manage and mitigation.

Microplastics in Sewage Sludge: A Known but Underrated Pathway in Wastewater Treatment Plants

Interest in the presence of microplastics (MPs) in wastewater has grown significantly in recent years. In fact, wastewater treatment plants (WWTPs) represent the last barrier before the discharge of MPs into an aquatic ecosystem. The research has highlighted how MPs are in part effectively removed from the waters and accumulated inside the sewage sludge (SeS) produced by the WWTP, being a cause for concern, especially in the case of agricultural reuse. This work aims to analyze the existing literature on the (i) methodical procedure for MPs analysis (thermal, spectroscopic, optical analyses), (ii) qualitative and quantitative presence of MPs in SeS, (iii) effect on sludge properties, and (iv) the possible accumulation in amended soils. Based on the results already obtained in the literature, this work aims to provide critical insights to stimulate interest in the topic and direct future research on aspects that should be deepened. In particular, it emerges that there is a clear need for standardization of the collection methods and the analytical techniques for identifying and quantifying MPs, since their physico-chemical characterization and the study on aging and on the response towards acid or basic pre-treatments are fundamental for the understanding of microplastics ecotoxicological potential.

Methods of Analyzing Microsized Plastics in the Environment

Microplastics are found in various environments with the increasing use of plastics worldwide. Several methods have been developed for the sampling, extraction, purification, identification, and quantification of microplastics in complex environmental matrices. This study intends to summarize recent research trends on the subject. Large microplastic particles can be sorted manually and identified through chemical analysis; however, sample preparation for small microplastic analysis is usually more difficult. Microplastics are identified by evaluating the physical and chemical properties of plastic particles separated through extraction and washing steps from a mixture of inorganic and organic particles. This identification has a high risk of producing false-positive and false-negative results in the analysis of small microplastics. Currently, a combination of physical (e.g., microscopy), chemical (e.g., spectroscopy), and thermal analyses is widely used. We aim to summarize the best strategies for microplastic analysis by comparing the strengths and limitations of each identification method.

Microplastics in the environment: Sampling, pretreatment, analysis and occurrence based on current and newly-exploited chromatographic approaches

The omnipresent character of microplastics (MPs) in environmental matrices, organisms and products has recently posed the need of their qualitative as well as quantitative analysis imperative, in order to provide data about their abundance and specification of polymer types in several substrates. In this framework, current and emerging approaches based on the chromatographic separation are of increased relevance in the field of MPs analysis and possess a large number of merits, since most of them are applicable in various complex matrices, sensitive and ideal for the detection of small-sized particles, whereas the common absence of any special pre-treatment step before analysis should also be highlighted. Αnalytical pyrolysis coupled with gas chromatography mass spectrometry (GC-MS) has recently gained ground as a powerful means to deliver information on MPs composition and degradation after their release into environment. Several instrumentations and trends in the area of analytical pyrolysis are thoroughly described within this review, while newly-exploited chromatographic methods in the field of MPs analysis, including Liquid Chromatography (LC) and Gel Permeation Chromatography (GPC) in this line are also investigated. The present review fills the gap of standardization concerning sampling, pre-treatment and chromatographic approaches and gathers all the available methodologies applied inside this area in accordance with the studied substrate, with the most examined environmental matrices being the solid one. After investigating the various works, some development options arise and it appears that chromatographic approaches should focus on improved extraction processes in terms of MPs isolation, since it is a crucial part in plastic items monitoring and is commonly depended on the polymer type and matrix. Special attention is given on the potential of chromatographic techniques for microplastics identification as well as quantification by confirming the current research status and knowledge gaps and highlighting some of the recent trends in this field.

Searching Nanoplastics: From Sampling to Sample Processing

Nanoplastics (NPs) are considered emerging pollutants, namely unregulated contaminants whose toxic effect on humans and the environment has been demonstrated or suspected. They are the result of the physical fragmentation of the plastics that over time reach smaller dimensions (<100 nm). The issues related to the characterization and quantification of NPs in the environmental matrices are mainly related to the infinitepsimal size, to the fact that they are found in bulk, and to the different physico-chemical forms in which the same polymer can evolve over time by degradation. To deal with the study of a new class of pollutants it is necessary to assess the entire analytical method, carefully considering every single step (sampling, cleanup, qualitative, and quantitative analysis) starting from the validation method in the laboratory. This paper reviews the analytical method steps, focusing on the first ones, which the current literature often underestimates: laboratory tests, sampling, and sample processing; in fact, most errors and the quality of the analyses often depend on them. In addition, all newly introduced sample processing methods were examined.

Chemical Analysis of Microplastics and Nanoplastics: Challenges, Advanced Methods, and Perspectives

Microplastics and nanoplastics have become emerging particulate anthropogenic pollutants and rapidly turned into a field of growing scientific and public interest. These tiny plastic particles are found in the environment all around the globe as well as in drinking water and food, raising concerns about their impacts on the environment and human health. To adequately address these issues, reliable information on the ambient concentrations of microplastics and nanoplastics is needed. However, micro- and nanoplastic particles are extremely complex and diverse in terms of their size, shape, density, polymer type, surface properties, etc. While the particle concentrations in different media can vary by up to 10 orders of magnitude, analysis of such complex samples may resemble searching for a needle in a haystack. This highlights the critical importance of appropriate methods for the chemical identification, quantification, and characterization of microplastics and nanoplastics. The present article reviews advanced methods for the representative mass-based and particle-based analysis of microplastics, with a focus on the sensitivity and lower-size limit for detection. The advantages and limitations of the methods, and their complementarity for the comprehensive characterization of microplastics are discussed. A special attention is paid to the approaches for reliable analysis of nanoplastics. Finally, an outlook for establishing harmonized and standardized methods to analyze these challenging contaminants is presented, and perspectives within and beyond this research field are discussed.

Characteristics, fate, and impact of marine plastic debris exposed to sunlight: A review

The increase of plastic production from the middle of the twentieth century was inevitably followed by an increase in the amount of plastic dumped in the natural environment. There, the plastic debris are exposed to sunlight, temperature, humidity, and physical stress. This can induce photo-oxidative and thermal degradation. This review discusses the mechanism of plastics UV weathering and its characteristics. Comparison of the photodegradation rate and physico-chemical properties are made according to the weathering mode (natural/accelerated) and medium (air/water). Since the photodegradation can lead to plastics fragmentation, this phenomenon is described along with the methodologies used in literature to evaluate the fragmentation. The impact of the photodegraded plastic debris on the marine environment is also presented in term of (i) photodegradation products and stabilizers leakage, (ii) organic pollutants accumulation, transfer, and leakage, and (iii) toxicity on marine organisms.

New methodologies for the detection, identification, and quantification of microplastics and their environmental degradation by-products

Sampling, separation, detection, and characterization of microplastics (MPs) dispersed in natural water bodies and ecosystems is a challenging and critical issue for a better understanding of the hazards for the environment posed by such nearly ubiquitous and still largely unknown form of pollution. There is still the need for exhaustive, reliable, accurate, reasonably fast, and cost-efficient analytical protocols allowing the quantification not only of MPs but also of nanoplastics (NPs) and of the harmful molecular pollutants that may result from degrading plastics. Here a set of newly developed analytical protocols, integrated with specialized techniques such as pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS), for the accurate and selective determination of the polymers most commonly found as MPs polluting marine and freshwater sediments are presented. In addition, the results of an investigation on the low molecular weight volatile organic compounds (VOCs) released upon photo-oxidative degradation of microplastics highlight the important role of photoinduced fragmentation at a molecular level both as a potential source of hazardous chemicals and as accelerators of the overall degradation of floating or stranded plastic debris.

Microplastic pollution of Calicut beach - Contributing factors and possible impacts

Annual monitoring was carried out in the shoreline sediments of the Calicut beach, from 2016 to 2019 to understand the distribution and abundance of microplastics and its environmental implications. Further, the impact of the severe fluvial floods of Kerala during the August months of 2018 and 2019, on the microplastic pollution of the Calicut beach was also determined. Microplastic concentrations ranged between 80.56 items/kg of dry sand to 467.13 items/kg of dry sand during the sampling period. Polyethylene type was consistently higher in all the samples. There was a surge in microplastics concentration during both the floods with a higher proportion of low-retention-period microplastics. Among the different oceanographic parameters, it was found that significant wave height and surface wind speed are positively correlated to the number of the microplastics in Calicut beach.

Extraction of microplastic from marine sediments: A comparison between pressurized solvent extraction and density separation

Due to the ecotoxicological effects, microplastics are considered a threat for the marine environment. Recent reports indicate their presence not only in subsurface water and in coastal beach sediments, but also in the deep-sea. Notwithstanding, there is still not a scientific consensus about the analytical procedure to be applied for their determination. In this work we compared the performance of two extraction methods: pressurized solvent extraction (PSE) and density separation. Sea sand and seafloor sediments were spiked with known amounts of polystyrene (PS), polyethylene (PE) and polypropylene (PP) microplastics and submitted to both the extraction procedures. Results showed that the PSE ensured higher recoveries for the smaller size particle fractions (89,2 ± 1.1% in the 50-150 μm range) whereas the density separation enabled precise recoveries for the larger size particles (SD = 1,5%). No significant differences in terms of blanks control were highlighted.

A Systematic Study on the Degradation Products Generated from Artificially Aged Microplastics

Most of the analytical studies focused on microplastics (MPs) are based on the detection and identification of the polymers constituting the particles. On the other hand, plastic debris in the environment undergoes chemical and physical degradation processes leading not only to mechanical but also to molecular fragmentation quickly resulting in the formation of leachable, soluble and/or volatile degradation products that are released in the environment. We performed the analysis of reference MPs–polymer micropowders obtained by grinding a set of five polymer types down to final size in the 857–509 μm range, namely high- and low-density polyethylene, polystyrene (PS), polypropylene (PP), and polyethylene terephthalate (PET). The reference MPs were artificially aged in a solar-box to investigate their degradation processes by characterizing the aged (photo-oxidized) MPs and their low molecular weight and/or highly oxidized fraction. For this purpose, the artificially aged MPs were subjected to extraction in polar organic solvents, targeting selective recovery of the low molecular weight fractions generated during the artificial aging. Analysis of the extractable fractions and of the residues was carried out by a multi-technique approach combining evolved gas analysis–mass spectrometry (EGA–MS), pyrolysis–gas chromatography–mass spectrometry (Py–GC–MS), and size exclusion chromatography (SEC). The results provided information on the degradation products formed during accelerated aging. Up to 18 wt% of extractable, low molecular weight fraction was recovered from the photo-aged MPs, depending on the polymer type. The photo-degradation products of polyolefins (PE and PP) included a wide range of long chain alcohols, aldehydes, ketones, carboxylic acids, and hydroxy acids, as detected in the soluble fractions of aged samples. SEC analyses also showed a marked decrease in the average molecular weight of PP polymer chains, whereas cross-linking was observed in the case of PS. The most abundant low molecular weight photo-degradation products of PS were benzoic acid and 1,4-benzenedicarboxylic acid, while PET had the highest stability towards aging, as indicated by the modest generation of low molecular weight species.

Methods for separating microplastics from complex solid matrices: Comparative analysis

Microplastics (MPs) are widely found in complex solid matrices such as soil, sediments and sludge. The separation procedure is crucial for effective analysis of MPs, but existing methods varied among studies. Here, we systematically summarize and compare separation methods including density, oil, electrostatic, magnetic, and solvent extraction separation. Density separation is the most commonly used approach, but time-consuming and discharging hazardous materials dependent on extraction solutions. In contrast, oil, electrostatic, magnetic separation and solvent extraction separation are emerging approaches with advantages of low-cost, quick, or environmentally-friendly, but with high request of instruments. Despite variation among these approaches, the separation efficiency is closely related to characteristics of MPs including polymer types, sizes and shapes. The treatment of digestion and fluorescence staining can facilitate the detection of MPs. This analysis suggests that further optimization and improvement of existing approaches can facilitate the development of new separation technology for assaying MPs in complex environmental matrices.

Plastic breeze: Volatile organic compounds (VOCs) emitted by degrading macro- and microplastics analyzed by selected ion flow-tube mass spectrometry

Pollution from microplastics (MPs) has become one of the most relevant topics in environmental chemistry. The risks related to MPs include their capability to adsorb toxic and harmful molecular species, and to release additives and degradation products into ecosystems. Their role as a primary source of a broad range of harmful volatile organic compounds (VOCs) has also been recently reported. In this work, we applied a non-destructive approach based on selected-ion flow tube mass spectrometry (SIFT-MS) for the characterization of VOCs released from a set of plastic debris collected from a sandy beach in northern Tuscany. The interpretation of the individual SIFT-MS spectra, aided by principal component data analysis, allowed us to relate the aged polymeric materials that make up the plastic debris (polyethylene, polypropylene, and polyethylene terephthalate) to their VOC emission profile, degradation level, and sampling site. The study proves the potential of SIFT-MS application in the field, as a major advance to obtain fast and reliable information on the VOCs emitted from microplastics. The possibility to obtain qualitative and quantitative data on plastic debris in less than 2 min also makes SIFT-MS a useful and innovative tool for future monitoring campaigns involving statistically significant sets of environmental samples.

Microbial communities of polyhydroxyalkanoate (PHA)-based biodegradable composites plastisphere and of surrounding environmental matrix: a comparison between marine (seabed) and coastal sediments (dune sand) over a long-time scale

Most researches on the plastisphere in coastal environments deal with plastics floating in seawater. Comparatively smaller attention has been devoted to the plastisphere of plastics buried in marine sediments, and very little is known on that of plastics on coastal sand dunes. Yet, limited information is available on the impact of plastics, especially biodegradable plastics, on microbial organisms in their surroundings. Nevertheless, a large amount of plastics sink on the seabed or is deposited on beach-dune systems. We investigated the succession of plastisphere microbial community on two biodegradable composites based on poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) and seagrass fibres (PHBV/PO), buried in seabed and dune sediments over a 27 months period in mesocosm. PHBV is regarded as a valuable alternative to conventional plastics and PHBV/PO has recently been designed for applications in coastal habitat restoration. We also examined the degradation rate and impact of these plastics on the microbial communities of surrounding sediments. Microbial communities of the surface of PHBV and PHBV/PO in seabed and dune sand differ from those of surrounding sediments, displaying a lower richness. Plastics colonization occurs largely from bacteria present in surrounding sediments, although the contribution from the water column bacterial pool could be not negligible for plastics in the seabed. No significant differences were detected between the communities of the two plastics and no significant impact of plastics on microbial community of the surrounding sediments was detected. The exceptional long duration of this study allowed to gain information on the succession of a plastisphere community over a previously unexplored time scale. Succession appears highly dynamic in dune sand even after two years, while the community structure in seabed seems to reach stability after one year. These findings highlight the importance of performing long-term studies when trying to characterize composition and dynamics of plastisphere bacterial communities.