Halomethanesulfonic Acids-A New Class of Polar Disinfection Byproducts: Standard Synthesis, Occurrence, and Indirect Assessment of Mitigation Options

Fate of persistent and mobile chemicals in the water cycle: From municipal wastewater discharges to river bank filtrate

Persistent and mobile (PM) chemicals are considered detrimental for drinking water resources as they may pass through all barriers protecting these resources against pollution. However, knowledge on the occurrence of PM chemicals in the water cycle, that make their way into drinking water resources, is still limited. The effluents of six municipal wastewater treatment plants (WWTPs, n = 38), surface water of two rivers (n = 32) and bank filtrate of one site (n = 15) were analyzed for 127 suspected PM chemicals. In the rivers, median concentrations of 92 detected analytes ranged from 0.3 ng/L to 2.6 µg/L (tetrafluoroborate, BF4). Lower than average dilution from WWTP effluent to surface water of 43 PM chemicals suggests significant discharge from other sources. Many of these compounds were industrial chemicals, including cyanoguanidine, trifluoromethanesulfonic acid and BF4. River bank filtration (RBF) reduced the total concentration of 40 quantified compounds by 60 % from 19.5 µg/L in surface water to 8.4 µg/L in bank filtrate, on average. Of these, 20 compounds showed good removal (> 80 %), 14 intermediate (80 - 20 %) and 6 no removal (≤ 20 %), among them carbamazepine, hexafluorophosphate, and 2-pyrrolidone. 13 substances occurred at concentrations ≥ 0.1 µg/L in bank filtrate; for six of them toxicological data were insufficient for a health-based risk assessment. The regulatory definition of P and M chemicals, if used together with existing data on environmental half-lives (P) and Koc (M), showed little power to discriminate between chemicals well removed in RBF and those that were hardly removed. This comprehensive field study shows that RBF is a useful but incomplete barrier to retain PM chemicals from surface water. Thus, PM chemicals are, indeed, a challenge for a sustainable water supply.

Structure confirmation, reactivity, bacterial mutagenicity and quantification of 2,2,4-tribromo-5-hydroxycyclopent-4-ene-1,3-dione in drinking water

The presence of two new disinfectant by-product (DBP) groups in the UK was recently shown using non-target analysis, halogenated-hydroxycyclopentenediones and halogenated-methanesulfonic acids. In this work, we confirmed the structure of 2,2,4-tribromo-5-hydroxycyclopent-4-ene-1,3-dione (TBHCD), and quantified it together with dibromomethanesulfonic acid at 122 ± 34 and 326 ± 157 ng L-1 on average in London's drinking water, respectively (n = 21). We found TBHCD to be photolabile and unstable in tap water and at alkaline pH. Furthermore, spectral and computational data for TBHCD and three other halogenated-hydroxycyclopentenediones indicated they could act as a source of radicals in water and in the body. Importantly, TBHCD was calculated to have a 14.5 kcal mol-1 lower C-Br bond dissociation enthalpy than the N-Br bond of N-bromosuccinimide, a common radical substitution reagent used in organic synthesis. TBHCD was mutagenic in Salmonella/microsome assays using strains TA98, TA100 and TA102. This work reveals the unique features, activity and toxicity of trihalogenated hydroxycyclopent-4-ene-1,3-diones, prompting a need to more comprehensively assess their risks.

Emerging contaminants: A One Health perspective

Environmental pollution is escalating due to rapid global development that often prioritizes human needs over planetary health. Despite global efforts to mitigate legacy pollutants, the continuous introduction of new substances remains a major threat to both people and the planet. In response, global initiatives are focusing on risk assessment and regulation of emerging contaminants, as demonstrated by the ongoing efforts to establish the UN's Intergovernmental Science-Policy Panel on Chemicals, Waste, and Pollution Prevention. This review identifies the sources and impacts of emerging contaminants on planetary health, emphasizing the importance of adopting a One Health approach. Strategies for monitoring and addressing these pollutants are discussed, underscoring the need for robust and socially equitable environmental policies at both regional and international levels. Urgent actions are needed to transition toward sustainable pollution management practices to safeguard our planet for future generations.

Sample preparation for suspect screening of persistent, mobile and toxic substances and their phase II metabolites in human urine by mixed-mode liquid chromatography

Persistent, mobile and toxic substances have drawn attention nowadays due to their particular properties, but they are overlooked in human monitorization works, limiting the knowledge of the human exposome. In that sense, human urine is an interesting matrix since not only parent compounds are eliminated, but also their phase II metabolites that could act as biomarkers. In this work, 11 sample preparation procedures involving preconcentration were tested to ensure maximum analytical coverage in human urine using mixed-mode liquid chromatography coupled with high-resolution tandem mass spectrometry. The optimized procedure consisted of a combination of solid-phase extraction and salt-assisted liquid-liquid extraction and it was employed for suspect screening. Additionally, a non-discriminatory dilute-and-shoot approach was also evaluated. After evaluating the workflow in terms of limits of identification and type II errors (i.e., false negatives), a pooled urine sample was analysed. From a list of 1450 suspects and in-silico simulated 1568 phase II metabolites (i.e. sulphates, glucuronides, and glycines), 44 and 14 substances were annotated, respectively. Most of the screened suspects were diverse industrial chemicals, but biocides, natural products and pharmaceuticals were also detected. Lastly, the complementarity of the sample preparation procedures, columns, and analysis conditions was assessed. As a result, dilute-and-shoot and the Acclaim Trinity P1 column at pH = 3 (positive ionization) and pH = 7 (negative ionization) allowed the maximum coverage since almost 70 % of the total suspects could be screened using those conditions.

Evaluating the photochemical reactivity of disinfection byproducts formed during seawater desalination processes

Reverse osmosis (RO) is widely used for seawater desalination but pre-chlorination of intake water produces halogenated disinfection byproducts (DBPs). The fate and environmental impacts associated with the discharge of DBP-containing RO brine wastewater are unknown. Therefore, to evaluate if photochemistry plays a role in DBP degradation in seawater, we collected samples at a desalination plant, which were desalted and concentrated using two-inline solid phase extraction (SPE) techniques combining reverse-phase polymeric (PPL) and weak anion exchange (WAX) resins. Both filtered water samples and SPE samples (extracts reconstituted in open ocean seawater) were exposed to simulated sunlight in a custom-built flow-through system. Optical property analysis during irradiation experiments did not provide distinguishing features between intake water and RO reject water (brine). Extractable organic bromine (organoBr) concentrations were low in intake water samples (7.8 μg Br L-1) and did not change significantly due to irradiation. OrganoBr concentrations in laboratory-chlorinated raw water were much higher (135 μg Br L-1) and on average decreased by 42 % after 24 h irradiation. However, while organoBr concentrations were highest in RO reject water (473 μg Br L-1), changes in organoBr concentrations in PPL SPE samples after 24 h irradiation were variable, ranging from a 1-46 % loss. Furthermore, most bromine-containing molecular ions identified by high resolution mass spectrometry that were present in RO reject water before irradiation were also found after both 24 h and 50 h exposures. Although only one RO reject water sample was tested in this study, results highlight that hundreds of yet to be identified brominated DBPs in RO reject water could be resistant to photodegradation or phototransform into existing DBPs in the environment. Future work examining the biolability of DBPs in RO reject water, as well as the interplay between photochemical and biological DBP cycling, is warranted.

Occurrence of halogenated methanesulfonic acids in water and sediment from the Hangzhou Bay, China

Halogenated methanesulfonic acids (HMSAs) are an important new class of organic compounds as they were universal in the water cycle and drinking water sources. However, no study has investigated the presence of HMSAs in surface water and sediment from China. The present study reports the occurrence and spatiotemporal distribution of seven HMSAs in water and sediment samples from Hangzhou Bay, China. Trifluoromethanesulfonic acid (TFMSA) was the main contributor to the concentrations of HMSAs in water and sediment samples from spring, summer, autumn and winter which were 30.8-541 ng/L, n. d.-86.6 ng/L, 4.22-70.9 ng/L and 8.86-192 ng/L, separately, while in sediment samples were n. d.-11.1 ng/g, n. d.-12.9 ng/g, n. d.-22.5 ng/g, n. d.-4.60 ng/g, respectively. The levels of HMSAs in water from winter and spring were higher than those in summer and autumn, and the concentrations of the target HMSAs in water presents a seasonal pattern affected by the temperature, the precipitation and river flow variations. Nevertheless, the levels of HMSAs in sediment were highest in the area near the industrial area and the confluences of rivers. Correlation analysis revealed that the concentrations of TFMSA were significantly positively correlated with total organic carbon (TOC) in water samples. Although TFMSA is regarded as low toxic based on the EC₅₀ value of acute toxicity, the potential risks to aquatic ecology should be paid more attention due to its high concentrations in the aquatic system and the environmental persistency.

Enhanced selectivity for acidic contaminants in drinking water: From suspect screening to toxicity prediction

A novel analytical workflow for suspect screening of organic acidic contaminants in drinking water is presented, featuring selective extraction by silica-based strong anion-exchange solid-phase extraction, mixed-mode liquid chromatography-high resolution accurate mass spectrometry (LC-HRMS), peak detection, feature reduction and compound identification. The novel use of an ammonium bicarbonate-based elution solvent extended strong anion-exchange solid-phase extraction applicability to LC-HRMS of strong acids. This approach performed with consistently higher recovery and repeatability (88 ± 7 % at 500 ng L^-1), improved selectivity and lower matrix interference (mean = 12 %) over a generic mixed-mode weak anion exchange SPE method. In addition, a novel filter for reducing full-scan features from fulvic and humic acids was successfully introduced, reducing workload and potential for false positives. The workflow was then applied to 10 London municipal drinking water samples, revealing the presence of 22 confirmed and 37 tentatively identified substances. Several poorly investigated and potentially harmful compounds were found which included halogenated hydroxy-cyclopentene-diones and dibromomethanesulfonic acid. Some of these compounds have been reported as mutagenic in test systems and thus their presence here requires further investigation. Overall, this approach demonstrated that employing selective extraction improved detection and helped shortlist suspects and potentially toxic chemical contaminants with higher confidence.

Revisiting Disinfection Byproducts with Supercritical Fluid Chromatography-High Resolution-Mass Spectrometry: Identification of Novel Halogenated Sulfonic Acids in Disinfected Drinking Water

High resolution mass spectrometry (HRMS) coupled to either gas chromatography or reversed-phase liquid chromatography is the generic method to identify unknown disinfection byproducts (DBPs) but can easily overlook their highly polar fractions. In this study, we applied an alternative chromatographic separation method, supercritical fluid chromatography-HRMS, to characterize DBPs in disinfected water. In total, 15 DBPs were tentatively identified for the first time as haloacetonitrilesulfonic acids, haloacetamidesulfonic acids, and haloacetaldehydesulfonic acids. Cysteine, glutathione, and p-phenolsulfonic acid were found as precursors during lab-scale chlorination, with cysteine providing the highest yield. A mixture of the labeled analogues of these DBPs was prepared by chlorination of ¹³C₃-¹⁵N-cysteine and analyzed using nuclear magnetic resonance spectroscopy for structural confirmation and quantification. A total of 6 drinking water treatment plants utilizing various source waters and treatment trains produced sulfonated DBPs upon disinfection. Those were widespread in the tap water of 8 cities across Europe, with estimated concentrations up to 50 and 800 ng/L for total haloacetonitrilesulfonic acids and haloacetaldehydesulfonic acids, respectively. Up to 850 ng/L haloacetonitrilesulfonic acids were found in 3 public swimming pools. Considering the stronger toxicity of haloacetonitriles, haloacetamides, and haloacetaldehydes than the regulated DBPs, these newly found sulfonic acid derivatives may also pose a health risk.

Insights into unexpected photoisomerization from photooxidation of tribromoacetic acid in aqueous environment using ultrafast spectroscopy

Haloacetic acids are carcinogenic disinfection by-products (DPBs) and their photo-decomposition pathways, especially for those containing bromine and iodine, are not fully understood. In this study, femtosecond transient absorption (fs-TA) spectroscopy experiments were introduced for the first time to investigate the photochemistry of tribromoacetic acid. The fs-TA experiments showed that a photoisomerization intermediate species HOOCCBr₂-Br (iso-TBAA) was formed within several picoseconds after the excitation of TBAA. The absorption wavelength of the iso-TBAA was supported by time-dependent density calculations. With the Second-order Møller-Plesset perturbation theory, the structures and thermodynamics of the OH-insertion reactions of iso-TBAA were elucidated when water molecules were involved in the reaction complex. The calculations also revealed that the isomer species were able to react with water with its reaction dynamics dramatically catalyzed by the hydrogen bonding network. The proposed water catalyzed OH-insertion/HBr elimination mechanism predicted three major photoproducts, namely, HBr, CO and CO₂, which was consistent with the photolysis experiments with firstly reported CO formation rate and mass conversion yield as 0.096 min^-1 and 0.75 ± 0.1 respectively. The spectroscopic technique, numerical tool and disclosed mechanisms provided insights on photodecomposition and subsequent reactions of polyhalo-DPBs contain heavy atom(s) (e.g., Br, I) with water, aliphatic alcohols or other nucleophiles.

Development of adaptive neuro-fuzzy inference system model for predict trihalomethane formation potential in distribution network simulation test

Trihalomethanes (THMs), which is one of the major classes of DBP known to be highly cytotoxic and genotoxic, were formed and modeled under controlled conditions by laboratory-scale distribution network simulation test. The formation potentials of THM depending on the parameters such as natural organic matter, bromide, chlorine, pH, and contact time were determined. Subsequently, the Adaptive Neuro-Fuzzy Inference System (ANFIS) model was developed using these parameters as inputs and THM formation potentials as output, and the correlation coefficient was 0.9817. In the range of the inputs, the ANFIS model representing the simulation test results were compared with THM formations of an actual distribution network system in dry and wet seasons. As a result, the predictions of the ANFIS model were little affected by the unidentified factors that were not used in model training but are known to affect THM formations in real waters and gave more consistent results than the EPA model.

New methods for identification of disinfection byproducts of toxicological relevance: Progress and future directions

Disinfection byproducts (DBPs) represent a ubiquitous source of chemical exposure in disinfected water. While over 700 DBPs have been identified, the drivers of toxicity remain poorly understood. Additionally, ever evolving water treatment practices have led to a continually growing list of DBPs. Advancement of analytical technologies have enabled the identification of new classes of DBPs and the quantification of these chemically diverse sets of DBPs. Here we summarize advances in new workflows for DBP analysis, including sample preparation, chromatographic separation with mass spectrometry (MS) detection, and data processing. To aid in the selection of techniques for future studies, we discuss necessary considerations for each step in the strategy. This review focuses on how each step of a workflow can be optimized to capture diverse classes of DBPs within a single method. Additionally, we highlight new MS-based approaches that can be powerful for identifying novel DBPs of toxicological relevance. We discuss current challenges and provide perspectives on future research directions with respect to studying new DBPs of toxicological relevance. As analytical technologies continue to advance, new strategies will be increasingly used to analyze complex DBPs produced in different treatment processes with the aim to identify potential drivers of toxicity.

Enrichment-free analysis of anionic micropollutants in the sub-ppb range in drinking water by capillary electrophoresis-high resolution mass spectrometry

Reversed-phase liquid chromatography (RPLC) used for water analysis is not ideal for the analysis of highly polar and ionic contaminants because of low retention. Capillary electrophoresis (CE), on the other hand, is perfectly suited for the separation of ionic compounds but rarely applied in environmental analysis due to the weak concentration sensitivity when coupled to mass spectrometry (MS). However, novel interface designs and MS technology strongly improve the sensitivity. Here, a method is presented enabling the screening of anionic micropollutants in drinking water without sample pretreatment by coupling of CE to an Orbitrap mass spectrometer by a nanoflow sheath liquid interface. Targeted analysis of halogenated acetic acids, trifluoromethanesulfonic acid, and perfluorooctanoic and perfluorooctanesulfonic acid was conducted in drinking water samples which were chlorinated for disinfection. A bare fused silica capillary with an optimized background electrolyte (BGE) for separation consisting of 10% acetic acid with 10% isopropanol with large volume sample injection and optimized interface parameters offer limits of quantification in the range of < 0.1 to 0.5 μg/L with good linearity (R² > 0.993) and repeatability (14% standard deviation in area). Concentrations of the target analytes ranged from 0.1 to 6.2 μg/L in the water samples. Masses corresponding to halogenated methanesulfonic acids have been found as suspects and were subsequently verified by standards. Mono-, dichloro-, and bromochloro methanesulfonic acid were quantified in a range of 0.2 to 3.6 μg/L. Furthermore, five sulfonic acids, four organosulfates, and the artificial sweeteners acesulfame and cyclamate as well as inorganics such as halides, halogenates, phosphate, and sulfate could be determined as suspects among more than 300 features in a non-targeted screening. Overall, this approach demonstrates the great potential of CE-nanoESI-MS for the screening of ionic contaminants in environmental samples, complementary to chromatographic approaches.

Matrix effects in the analysis of polar organic water contaminants with HILIC-ESI-MS

Matrix effects have been shown to be very pronounced and highly variable in the analysis of mobile chemicals, which may severely exacerbate accurate quantification. These matrix effects, however, are still scarcely studied in combination with hydrophilic interaction liquid chromatography (HILIC) and for very polar chemicals. In this study, the matrix effects of 26 polar model analytes were investigated in enriched drinking water, wastewater treatment plant effluent and solutions of inorganic salts, utilizing post-column infusion of the analytes into a HILIC-electrospray ionisation (ESI)-high-resolution mass spectrometry system. These experiments revealed the occurrence of structure-specific and unspecific matrix effects. The unspecific matrix effects were mainly observed in positive ESI polarity and predominantly coincided with a high ion count, resulting in ion suppression of all analytes. Thus, the excess charge is hypothesized to be the limiting factor in ion formation. Structure-specific matrix effects were more pronounced in negative ESI polarity and even structurally similar compounds were observed to react entirely differently: perfluoroalkyl carboxylic acids were suppressed, while perfluoroalkane sulfonic acids were simultaneously enhanced. These matrix effects were traced back to inorganic anions and cations, which eluted over a significant fraction of the chromatographic run time with this setup. Hence, it was concluded that inorganic ions are a main cause for matrix effects in the analysis of mobile chemicals utilizing HILIC. Graphical abstract.

Analysis of mobile chemicals in the aquatic environment-current capabilities, limitations and future perspectives

Persistent and mobile water contaminants are rapidly developing into a focal point of environmental chemistry and chemical regulation. Their defining parameter that sets them apart from the majority of regularly monitored and regulated contaminants is their mobility in the aquatic environment, which is intrinsically tied to a high polarity. This high polarity, however, may have severe implications in the analytical process and thus the most polar of these mobile contaminants may not be covered by widely utilized trace-analytical methods, and thus, alternatives are required. In this review, we infer the physical and chemical properties of mobile water contaminants from a set of almost 1800 prioritized REACH chemicals and discuss the implications these substance properties may have on four integral steps of the analytical process: sampling and sample storage, sample pre-treatment, separation and detection. We discuss alternatives to widely utilized trace-analytical methods, examine their application range and limitations, highlight potential analytical techniques on the horizon and emphasize research areas we believe still offer the most room for further improvement. While we have a comprehensive set of analytical methods to cover a large portion of the known mobile chemicals, these methods are still only infrequently utilized. Graphical abstract.

The determination of two emerging perfluoroalkyl substances and related halogenated sulfonic acids and their significance for the drinking water supply chain

In the present study analytical methodologies were developed for two newly emerging polar perfluorinated alkyl substances (PFAS), namely F₃-MSA, and HFPO-DA, in order to assess the occurrence and levels of these PFAS in Dutch and Belgian waters. Two separate methods were needed for analysing F₃-MSA and HFPO-DA. A mixed-mode and a reversed phase C18 method were developed for F₃-MSA and HFPO-DA, respectively, using a high resolution Orbitrap Fusion mass spectrometer for detection, yielding satisfactory LOD and LOQ results for both analytes. A sample campaign was performed collecting single grab samples from various locations and different stages of the drinking water production chain. Whereas both PFAS were absent in groundwaters, they were found to be present in surface waters, river bank and dune infiltrates, process water, and drinking water, demonstrating the persistence and mobility of both compounds. Based on provisional health-based guideline values (0.15 μg L^-1 for HFPO-DA, 11.9 mg L^-1 for F₃-MSA), the current levels in drinking water from the suppliers involved in this study do not pose a health risk for the human population. Common removal processes used in drinking water production appeared to remove these polar compounds at most partially. At locations close to potential sources of these chemicals (e.g. fluoropolymer production sites), the quality of surface water or river bank filtrate abstracted for production of drinking water must therefore be monitored.