Interactive Toxicity of Triclosan and Nano-TiO2 to Green Alga Eremosphaera viridis in Lake Erie: A New Perspective Based on Fourier Transform Infrared Spectromicroscopy and Synchrotron-Based X-ray Fluorescence Imaging

Ecotoxicological effects of triclosan on Lemna minor: bioconcentration, growth inhibition and oxidative stress

Triclosan (TCS), an emerging pollutant, is a notable contributor to adverse impacts on aquatic organisms due to its widespread use during COVID-19 and hydrophobic properties. There is extensive documented literature on TCS toxicity in commercially important fish species; however, studies on aquatic plants remain limited. In this prelude, the present study aims to evaluate the effect of TCS on Lemna minor, a commercially important aquatic plant species for 7 days. The results showed dose-dependent significant alterations in growth, pigments and stress enzymes of L. minor at varied concentrations of TCS (1 to 8 mg L-1). Median inhibitory concentration (IC50) was found to be 4.813 mg L-1. Total chlorophyll and carotenoid levels decreased 73.11 and 81.83%, respectively after 7 days of TCS exposure. A significant increase in catalase and superoxide dismutase activity was observed in TCS exposed groups as compared to the control. Bioconcentration factor was found to be in the range of 5.855 to 37.129 signifying TCS ability to accumulate and transfer through the food chain. Scanning electron microscopy (SEM) analysis showed deformation in the cell surface and alteration of stroma morphology of TCS exposed groups. Furthermore, the Fourier transform infrared spectroscopy (FTIR) study also revealed that higher concentrations of TCS could cause alteration in the functional groups in the plant. This study demonstrates that TCS negatively impacts the growth and metabolism of primary producers, offering crucial insights into its interactions with aquatic plants and establishing baseline information essential for crafting effective mitigation strategies for TCS contamination in aquatic environments.

Polyhydroxybutyrate Plastics Show Rapid Disintegration and More Straightforward Biogeochemical Impacts than Polyethylene under Marine Biofragmentation

Although massive studies have investigated the spatiotemporally occurring marine plastisphere, a new microbial ecosystem colonizing the surfaces of plastics, the resulting biofragmentation process and impacts of plastics on biogeochemical cycles remain largely unknown. Here, we leverage synchrotron-based Fourier transform infrared spectromicroscopy (FTIR mapping) and metagenomic sequencing to explore independent marine microcosms amended with petroleum-based polyethylene (PE) and biobased polyhydroxybutyrate (PHB) plastic films. FTIR mapping results demonstrate unequal fragmentation scenarios by which the PE plastic rarely releases oxidized fragments while PHB disintegrates quickly, gradually forming fragments composed of extracellular polymeric substances resembling plastic films. Metagenomic analysis shows the critical role of hydrocarbonoclastic lineages in the biodegradation of the two plastics by the fatty acid degradation pathway, where the PE plastics host different microbial trajectories between the plastisphere (dominated by Alcanivorax) and surrounding seawater. In contrast, the PHB addition demonstrates decreased microbial richness and diversity, consistent community composition (dominated by Phaeobacter and Marinobacter), and apparently stimulated sulfur cycle and denitrification pathways in both the plastisphere and surrounding seawater. Our study gives scientific evidence on the marine biotic processes distinguishing petroleum- and biobased plastics, highlighting marine PHB input exerting straightforward impacts on the water phase and deserving critical management practices.

Nanoplastics increase algal absorption and toxicity of Cd through alterations in cell wall structure and composition

Nanoplastics (NPs) may act as carriers of heavy metals and cause complex toxicity to aquatic organisms, while the exact role of NPs in the joint toxicity remains unclear. Here, we investigated the joint toxicity of polystyrene NPs (PS-NPs) and Cd to freshwater algae (Chlorella vulgaris). It was found that PS-NPs (1 mg L-1) could hardly enter algal cells and slightly inhibit algal growth (p < 0.01). The effect of PS-NPs as carriers on the joint toxicity of PS-NPs and heavy metals could be neglected because of the limited adsorption of Cd by PS-NPs, while the PS-NPs altered the cell wall structure and composition, which resulted in the increased algal absorption and toxicity of Cd. Compared to the low dose Cd (0.4 mg L-1) treatment alone, the extracellular and intracellular Cd contents in the cotreatment were significantly increased by 27.3 % and 18.0 %, respectively, due to the increased contents of cell wall polysaccharides (pectin and hemicellulose in particular) by the PS-NPs. Furthermore, after the high dose Cd (2 mg L-1) exposure, the inhibited polysaccharide biosynthesis and the loosen cell wall structure weakened the tolerance of cell wall to abiotic stress, facilitating the entry of PS-NPs into the algal cells and inducing the higher toxicity. These results elucidate the mechanism by which NPs enhance heavy metal toxicity to algae, providing a novel insight into environmental risks of NPs.

Physiological impact of personal care product constituents on non-target aquatic organisms

Personal care products (PCPs) are products used in cleaning, beautification, grooming, and personal hygiene. The rise in diversity, usage, and availability of PCPs has resulted in their higher accumulation in the environment. Thus, these constitute an emerging category of environmental contaminants due to the potential of its constituents (chemical and non-chemical) to induce various physiological effects even at lower concentrations (ng/L). For analyzing the impact of the PCPs constituents on the non-target organism about 300 article including research articles, review articles and guidelines were studied from 2000 to 2023. This review aims to firstly discuss the fate and accumulation of PCPs in the aquatic environment and organisms; secondly provides overview of environmental risks that are linked to PCPs; thirdly review the trends, current status of regulations and risks associated with PCPs and finally discuss the knowledge gaps and future perspectives for future research. The article discusses important constituents of PCPs such as antimicrobials, cleansing agents and disinfectants, fragrances, insect repellent, moisturizers, plasticizers, preservatives, surfactants, UV filters, and UV stabilizers. Each of them has been found to display certain toxic impact on the aquatic organisms especially the plasticizers and UV filters. These continuously and persistently release biologically active and inactive components which interferes with the physiological system of the non-target organism such as fish, corals, shrimps, bivalves, algae, etc. With a rise in the number of toxicity reports, concerns are being raised over the potential impacts of these contaminant on aquatic organism and humans. The rate of adoption of nanotechnology in PCPs is greater than the evaluation of the safety risk associated with the nano-additives. Hence, this review article presents the current state of knowledge on PCPs in aquatic ecosystems.

Recent Advances on Electrochemical Sensors for Detection of Contaminants of Emerging Concern (CECs)

Contaminants of Emerging Concern (CECs), a new category of contaminants currently in the limelight, are a major issue of global concern. The pervasive nature of CECs and their harmful effects, such as cancer, reproductive disorders, neurotoxicity, etc., make the situation alarming. The perilous nature of CECs lies in the fact that even very small concentrations of CECs can cause great impacts on living beings. They also have a nature of bioaccumulation. Thus, there is a great need to have efficient sensors for the detection of CECs to ensure a safe living environment. Electrochemical sensors are an efficient platform for CEC detection as they are highly selective, sensitive, stable, reproducible, and prompt, and can detect very low concentrations of the analyte. Major classes of CECs are pharmaceuticals, illicit drugs, personal care products, endocrine disruptors, newly registered pesticides, and disinfection by-products. This review focusses on CECs, including their sources and pathways, health effects caused by them, and electrochemical sensors as reported in the literature under each category for the detection of major CECs.

Removal of organic and inorganic contaminants from the air, soil, and water by algae

Rapid increases in human populations and development has led to a significant exploitation of natural resources around the world. On the other hand, humans have come to terms with the consequences of their past mistakes and started to address current and future resource utilization challenges. Today's primary challenge is figuring out and implementing eco-friendly, inexpensive, and innovative solutions for conservation issues such as environmental pollution, carbon neutrality, and manufacturing effluent/wastewater treatment, along with xenobiotic contamination of the natural ecosystem. One of the most promising approaches to reduce the environmental contamination load is the utilization of algae for bioremediation. Owing to their significant biosorption capacity to deactivate hazardous chemicals, macro-/microalgae are among the primary microorganisms that can be utilized for phytoremediation as a safe method for curtailing environmental pollution. In recent years, the use of algae to overcome environmental problems has advanced technologically, such as through synthetic biology and high-throughput phenomics, which is increasing the likelihood of attaining sustainability. As the research progresses, there is a promise for a greener future and the preservation of healthy ecosystems by using algae. They might act as a valuable tool in creating new products.

Identification of the driving factors of microplastic load and morphology in estuaries for improving monitoring and management strategies: A global meta-analysis

Estuaries are one of the primary pathways for transferring microplastics (MPs) from the land to the ocean. A comprehensive understanding of the load, morphological characteristics, driving factors, and potential risks of MPs in estuaries is imperative to inform reliable management in this critical transboundary area. Extracted from 135 publications, a global meta-analysis comprising 1477 observations and 124 estuaries was conducted. MP abundance in estuaries was tremendously variable, reaching a mean of 21,342.43 ± 122,557.53 items/m3 in water and 1312.79 ± 6295.73 items/kg in sediment. Fibers and fragments take up a majority proportion in estuaries. Polyester, polypropylene, and polyethylene are the most detected MP types. Around 68.73% and 85.51% of MPs detected in water and sediment are smaller than 1 μm. The redundancy analysis revealed that the explanatory factors influencing the morphological characteristics of MPs differed between water and sediment. Regression analysis shows that MP abundance in water is significantly inversely correlated with mesh/filter size, per capita plastic waste, and the Human Development Index, whereas it is significantly positively correlated with population density and share of global mismanaged plastic waste. MP abundance in sediment significantly positively correlated with aridity index and probability of plastic entering the ocean, while significantly negatively correlated with mesh/filter size. Analysis based on Geodector identified that the extraction method, density of flotation fluid, and sampling depth are the top three explanatory factors for MP abundance in water, while the share of global mismanaged plastic waste, the probability of plastic being emitted into the ocean, and population density are the top three explanatory factors for MP abundance in sediment. In the studied estuaries, 46.75% of the water and 2.74% of the sediment are categorized into extremely high levels of pollution, while 73.08% of the water and 43.48% of the sediment belong to class V of the potential ecological index.

The combined toxicity of silver nanoparticles and typical personal care products in diatom Navicula sp

Toxicity of silver nanoparticles (AgNPs) at environmentally relevant concentrations has been received an increasing attention, and their influence on the bioavailability of personal care products has been seldom studied. Here, the toxicity of AgNPs in typical diatom Navicula sp. was explored, and their influence on the bioavailability of typical personal care products such as triclosan (TCS) and galaxolide (HHCB) was also investigated. The underlying toxicity mechanisms were explored using liquid chromatography-mass spectrometry (LC-MS)-based metabolomics. Low concentrations of AgNPs (10 and 50 μg L-1) induced no observable responses of Navicula sp., in terms of growth rate, chlorophyll contents, and malondialdehyde accumulation. Furthermore, low doses of AgNPs could attenuate TCS or HHCB toxicity to Navicula sp., which was mainly attributed to the reduced oxidative stress. Metabolomics revealed that the disruption of DNA or RNA synthesis and instability of cytokinin-like substances may be also the reasons for the toxicity of AgNPs and TCS to Navicula sp. The damaged algal photosynthesis exposed to HHCB may be recovered by AgNPs, and the presence of signal chemicals (dehydrophytosphingosine and cardamonin) also showed a recovered algal growth. These results emphasize the potential of metabolomics to reveal toxicity mechanism, providing a new perspective on the aquatic risk assessment of nanoparticles and emerging organic pollutants.

Risk assessment and binding mechanisms of potentially toxic metals in sediments from different water levels in a coastal wetland

The excessive accumulation of potentially toxic metals (Pb and Cd) in coastal wetlands is among the main factors threatening wetland ecosystems. However, the effects of water table depth (WTD) on the risk and binding mechanisms of potentially toxic metals in sediments remain unclear. Here, sediments from different WTD obtained from a typical coastal wetland were evaluated using a newly developed strategy based on chemical extraction methods coupled with high-resolution spectroscopy. Our findings indicated that the WTD of the coastal wetland fluctuates frequently and the average enrichment factor for Pb was categorized as minor, whereas Cd enrichment was categorized as moderate. High-resolution spectroscopy techniques also demonstrated that organic functional groups and partly inorganic compounds (e.g., Fe-O/Si-O) played a vital role in the binding of Pb and Cd to surface sediments. Additionally, mineral components rather than organic groups were mainly bound to these metals in the bottom sediments. Collectively, our findings provide key insights into the potential health effects and binding characteristics of potentially toxic metals in sediments, as well as their dynamic behavior under varying sediment depths at a microscale.

Molecular Toxicity Mechanism Induced by the Antibacterial Agent Triclosan in Freshwater Euglena gracilis Based on the Transcriptome

Triclosan (TCS), a commonly used antibacterial preservative, has been demonstrated to have high toxicological potential and adversely affects the water bodies. Since algae are one of the most significant primary producers on the planet, understanding the toxicological processes of TCS is critical for determining its risk in aquatic ecosystems and managing the water environment. The physiological and transcriptome changes in Euglena gracilis were studied in this study after 7 days of TCS treatment. A distinct inhibition ratio for the photosynthetic pigment content in E. gracilis was observed from 2.64% to 37.42% at 0.3-1.2 mg/L, with TCS inhibiting photosynthesis and growth of the algae by up to 38.62%. Superoxide dismutase and glutathione reductase significantly changed after exposure to TCS, compared to the control, indicating that the cellular antioxidant defense responses were induced. Based on transcriptomics, the differentially expressed genes were mainly enriched in biological processes involved in metabolism pathways and microbial metabolism in diverse environments. Integrating transcriptomics and biochemical indicators found that changed reactive oxygen species and antioxidant enzyme activities stimulating algal cell damage and the inhibition of metabolic pathways controlled by the down-regulation of differentially expressed genes were the main toxic mechanisms of TCS exposure to E. gracilis. These findings establish the groundwork for future research into the molecular toxicity to microalgae induced by aquatic pollutants, as well as provide fundamental data and recommendations for TCS ecological risk assessment.

Investigation of cytotoxic cadmium in aquatic green algae by synchrotron radiation-based Fourier transform infrared spectroscopy: Role of dissolved organic matter

The heavy metal Cd can cause severe toxicity on aquatic algae, but there are few studies on the cytotoxicity of heavy metal on algae based on synchrotron radiation technology. In this study, synchrotron radiation-based Fourier transform infrared spectromicroscopy (SR-FTIR) was used to characterize in vivo the toxic effects of Cd on Cosmarium sp. cells, emphasizing the influence of dissolved organic matter (DOM) on Cd toxicity. Results showed that, in the absence of DOM, obvious growth inhibition, cell volume reduction, and photosynthesis disruption could be observed with increasing Cd concentrations (0-500 μg/L). Based on the SR-FTIR imaging and functional group quantification, it was shown that the biosynthesis of biomolecules such as proteins, lipids, and carbohydrates was inhibited in algal cells. However, the addition of DOM caused significant heterogeneities in biomacromolecule biosynthesis that an increased biosynthesis of carbohydrates and structural lipids but an inhibited biosynthesis of proteins and storage lipids were observed. Furthermore, the correlation analysis and principal component analysis showed a good correlation between v(C-OH)/Amide II and biochemical parameters, indicating that changes of carbohydrates could be used as the biomarker to indicate the cytotoxicity of heavy metals to algal cells. These findings provide insight into the mechanisms of heavy metal cytotoxicity to aquatic algae and systematic cytotoxicity assessment under various aquatic conditions.

Fabrication of Anatase TiO2/PVDF Composite Membrane for Oil-in-Water Emulsion Separation and Dye Photocatalytic Degradation

At present, the types of pollutants in wastewater are more and more complicated, however, the multifunctional membrane materials are in short supply. To prepare a membrane with both high efficient oil-in-water emulsion separation performance and photocatalytic degradation performance of organic dyes, the bifunctional separation membrane was successfully prepared by electrostatic spinning technology of PVDF/PEMA and in situ deposition of anatase TiO₂ nanoparticles containing Ti³⁺ and oxygen vacancies (O_v). The prepared composite membrane has excellent hydrophilic properties (WCA = 15.65), underwater oleophobic properties (UOCA = 156.69), and photocatalytic performance. These composite membranes have high separation efficiency and outstanding anti-fouling performance, the oil removal efficiency reaches 98.95%, and the flux recovery rate (FRR) reaches 99.19% for soybean oil-in-water emulsion. In addition, the composite membrane has outstanding photocatalytic degradation performance, with 97% and 90.2% degradation of RhB and AG-25 under UV conditions, respectively. Several oil-in-water separation and dye degradation experiments show that the PVDF composite membrane has excellent reuse performance. Based on these results, this study opens new avenues for the preparation of multifunctional reusable membranes for the water treatment field.

An investigation into the aging of disposable face masks in landfill leachate

Due to the excessive use of disposable face masks during the COVID-19 pandemic, their accumulation has posed a great threat to the environment. In this study, we explored the fate of masks after being disposed in landfill. We simulated the possible process that masks would experience, including the exposure to sunlight before being covered and the contact with landfill leachate. After exposure to UV radiation, all three mask layers exhibited abrasions and fractures on the surface and became unstable with the increased UV radiation duration showed aging process. The alterations in chemical groups of masks as well as the lower mechanical strength of masks after UV weathering were detected to prove the happened aging process. Then it was found that the aging of masks in landfill leachate was further accelerated compared to these processes occurring in deionized water. Furthermore, the carbonyl index and isotacticity of the mask samples after aging for 30 days in leachate were higher than those of pristine materials, especially for those endured longer UV radiation. Similarly, the weight and tensile strength of the aged masks were also found lower than the original samples. Masks were likely to release more microparticles and high concentration of metal elements into leachate than deionized water after UV radiation and aging. After being exposed to UV radiation for 48 h, the concentration of released particles in leachate was 39.45 μL/L after 1 day and then grew to 309.45 μL/L after 30 days of aging. Seven elements (Al, Cr, Cu, Zn, Cd, Sb and Pb) were detected in leachate and the concentration of this metal elements increased with the longer aging time. The findings of this study can advance our understanding of the fate of disposable masks in the landfill and develop the strategy to address this challenge in waste management.

Effects of natural nanoparticles on the acute toxicity, chronic effect, and oxidative stress response of phenicol antibiotics in Daphnia magna

Natural nanoparticles (NNP) are ubiquitous in natural water and can interact with other contaminants, causing ecotoxic effects on aquatic nontarget organisms. However, the impact of NNPs on the ecotoxicity of antibiotics remains largely unknown. This work investigated the acute toxicity, chronic effect, and oxidative response and damage in Daphnia magna co-exposed to phenicol antibiotics (chloramphenicol, thiamphenicol) and different concentrations of NNPs (10 mg/L: environmentally relevant concentration; 100 mg/L: a high concentration that caused no apparent immobilization in D. magna). The results showed that the acute toxicity of chloramphenicol was increased by 10 mg/L NNPs but decreased by 100 mg/L NNPs; both concentrations of NNPs increased and decreased acute toxicities of thiamphenicol and chloramphenicol + thiamphenicol treatments, respectively. After long-term exposure, phenicol antibiotics (1 μg/L) and NNP (10 mg/L) mixtures in environmentally relevant concentrations significantly affected the reproduction of D. magna but did not influence their growth. The catalase activity, reduced glutathione level, and malonaldehyde content in D. magna also varied with the NNPs concentrations. Notably, the lowest concentration of thiamphenicol and chloramphenicol + thiamphenicol combined with NNPs significantly increased the malondialdehyde content in D. magna compared with the control, indicating membrane lipid peroxidation occurred in daphnids. This study suggests that the toxic effects of contaminants and NNPs on aquatic organisms should be considered thoroughly to avoid underestimating the hazard of these pollutants in the actual aquatic environment.

New Perspective on the Mobilization of Microplastics through Capillary Fringe Fluctuation in a Tidal Aquifer Environment

The presence of plastic fragments in the environment is a growing global concern. In this study, we explored the effects of dynamic fluctuations of capillary fringe on the transport of microplastics (MPs) in the substrate combining various environmental and MP properties. Both experimental and Hydrus-2D modeling results confirmed that increasing cycles of water table fluctuation led to the rise of capillary fringe. An increase in the cycles of water table fluctuations did not significantly change the overall MP retention percentages in 0.5 mm substrate but altered the MP distribution along the column. In 1 and 2 mm substrate, the increase in cycle numbers enhanced the MP transport from substrate to the water below. In terms of the size of the MPs, more 20-25 μm polyethylene (PE2) were retained in the substrate compared to 4-6 μm polyethylene (PE1) under the same number of fluctuation cycles. High-density polytetrafluoroethylene (PTFE, 5-6 μm) exhibited higher retention percentages compared to PE1 particles. Ultraviolet aging for 60 days enhanced PE1 transport along the column, while 60 days of seawater aging did not affect PE1 transport greatly. For PTFE, ultraviolet and seawater aging enhanced its retention in the substrate. The retention percentages of both PE1 and PTFE in the column increased with the elevated ionic strength and the decrease of fluctuation velocity. This work highlights that capillary fringe fluctuation can serve as a pathway to relocate MPs to the tidal aquifer.

An experimental and modeling study on the penetration of spilled oil into thawing frozen soil

Oil spills are significant environmental accidents that have significant impacts on environmental and ecological health. Spill pollution in the cold regions may pose a particular challenge. To achieve a fast response, the oil transport mode such as penetration should be well understood. In this study, the oil penetration behavior in thawing frozen soil at different temperatures and water contents were investigated. The results showed the penetration behavior of spilled oil in the thawing frozen soil and the influence of salinity level. The modified Green-Ampt model could simulate the penetration process well especially with high water content, relatively cold temperature, and slow thawing rate. This study reveals the new features of oil penetration behavior and distribution patterns in thawing frozen soil under different conditions. Hence, it is of significant importance to support the rapid response measures and reduce the contamination of oil spill accidents in cold regions.

Binary toxicity of polystyrene nanoplastics and polybrominated diphenyl ethers to Arctic Cyanobacteria under ambient and future climates

Cyanobacteria are the predominant biota in the Arctic. Interactive effects on Arctic cyanobacteria between climate-change-shifting parameters and anthropogenic contaminants are largely unknown. We utilized a fractional factorial experiment and Arctic cyanobacteria Pseudanabaena biceps Strain PCCC_O-153 to capture the complexity of interacting climate factors, nano-polystyrene (nano-PS) and 2,2´,4,4´-tetrabromodipenyl ether (BDE-47). The short-term binary toxicity of nano-PS and BDE-47 was then examined through experiments, toxicity units, and reference models. The toxic mechanism was further revealed through biochemical analyses and multivariate statistics. We found that BDE-47 and nano-PS had more hazardous effects than changing climate conditions. The mixture had antagonistic effects on PCCC_O-153, attributing to the aggregation of nano-PS, the adsorption of BDE-47, and the wrapping of both contaminants by released extracellular polymeric substances. Binary toxicity was caused by the chain reactions triggered by combining individual contaminants. Total protein was a sensitive target and positively correlated to chlorophyll pigment. Oxidative stress for the mixture mainly resulted from the presence of nano-PS. This is the first study to access the hazardous effects of a mixture of anthropogenic contaminants on Arctic cyanobacteria under ambient and future climates.

Chronic level of exposures to low-dosed MoS2 nanomaterials exhibits more toxic effects in HaCaT keratinocytes

Molybdenum disulfide nanomaterials (MoS₂ NMs) have shown significant role as photocatalysts, lubricating agents and sterilant due to their remarkable physicochemical properties. Because of the increasing demand for MoS₂ NMs in numerous industrial domains, greater occupational exposure and subsequent NMs release into environment would be unavoidable. However, much efforts have been made to uncover the biological effects of NMs at unrealistic high concentration or acute duration, placing constraints on setting the realistic occupational exposure thresholds with confidence. In order to fill the current knowledge gap, this study aimed to evaluate the nanotoxicity of MoS₂ NMs with or without surface defects under the more realistic exposure mode. Noteworthily, the artificial sweat transformed-occupational exposure-cytotoxicity investigation of MoS₂ NMs was established as the main studied line. And the high cellular internalization and augmented oxidative stress triggered by surface defect could be recognized as the main factors for triggering serious cellular damage. Moreover, the HaCaTs exhibited loss of cell membrane integrity, dysfunction of mitochondria, disorder of endoplasmic reticulum and damages of nuclei after chronic exposure, compared with acute exposure. The study provided closely realistic exposure scenarios for NMs which exhibited significant difference from acute toxic investigation, enriching understanding towards real environmental safety of NMs.

Development of a calcium alginate-cellulose nanocrystal-based coating to reduce the impact of oil spills on shorelines

It is well known that oil stranded on shoreline substrates can be difficult to remove and cause serious environmental effects. To address this issue, a calcium alginate-cellulose nanocrystal (CA-CNC)-based coating with a unique surface structure and superhydrophobic properties was developed to reduce the extent of shoreline oiling. The results of batch washing test showed that not only did the introduction of CNC not reduce the oil removal efficiency; it also improved the environmental stability of the coating to resist the effects associated with seawater immersion and erosion (especially in the case of 0.4 wt% of CNC). The oil-repellent performance of the coated gravels implied that both oscillation time and oil concentration had almost no effects on the amount of adhered oil. Assessment of oiling prevention based on the laboratory shoreline tank simulator proved the coated gravel performed very well as more oil floated and less oil remained on substrates and penetrated into the subsurface. Biotoxicity analysis showed that the coating powders reduced impacts on the toxicity of the oil to algae at low doses. There is a good potential for the use of this CA-CNC based coating technique to improve shoreline oil spill response.

Sources, behaviors, transformations, and environmental risks of organophosphate esters in the coastal environment: A review

The rapid growth in the global production of organophosphate esters (OPEs) has resulted in their high environmental concentrations. The low removal rate of OPEs makes the effluents of wastewater treatment plants be one of the major sources of OPEs. Due to relatively high solubility and mobility, OPEs can be carried to the coastal environment through river discharge and atmospheric deposition. Therefore, the coastal environment can be an important OPE sink. Previous studies have shown that OPEs were widely detected in coastal atmospheres, water, sediments, and even aquatic organisms. OPEs can undergo various environmental processes in the coastal environment, including adsorption/desorption, air-water exchange, and degradation. In addition, bioaccumulation of OPEs was observed in coastal biota but current concentrations would not cause significant ecological risks. More efforts are required to understand the environmental behaviors of OPEs and address resultant environmental and health risks, especially in the complicated environment.

Cleanup of oiled shorelines using a dual responsive nanoclay/sodium alginate surface washing agent

Oil spills may affect ecosystems and endanger public health. In this study, we developed a novel and dual responsive nanoclay/sodium alginate (NS) washing fluid, and systematically evaluated its application potential in oiled shoreline cleanup. The characterization results demonstrated that sodium alginate combined with nanoclay via hydrogen bonds, and was inserted into the interlayer spacing of nanoclay. Adding sodium alginate reduced surface and interfacial tensions, while increasing the viscoelasticity of the washing fluid. Batch experiments were conducted to investigate oil removal performance under various conditions. Additionally, the factorial design analysis showed that three single factors (temperature, oil concentration, and salinity), and two interactive effects (temperature/salinity; and oil concentration/HA) displayed significant effects on the oil removal efficiency of the NS washing fluid. Compared to the commercial surfactants, the NS composite exhibited satisfactory removal efficiencies for treating oily sand. Green materials-stabilized Pickering emulsion can potentially be used for oil/water separation. The NS washing agent displayed excellent pH- and Ca²⁺- responsiveness, generating transparent supernatants with low oil concentration and turbidity. Our work opens an interesting avenue for designing economical, high performance, and green washing agents.

Machine Learning-Aided Causal Inference Framework for Environmental Data Analysis: A COVID-19 Case Study

Links between environmental conditions (e.g., meteorological factors and air quality) and COVID-19 severity have been reported worldwide. However, the existing frameworks of data analysis are insufficient or inefficient to investigate the potential causality behind the associations involving multidimensional factors and complicated interrelationships. Thus, a causal inference framework equipped with the structural causal model aided by machine learning methods was proposed and applied to examine the potential causal relationships between COVID-19 severity and 10 environmental factors (NO₂, O₃, PM2.5, PM10, SO₂, CO, average air temperature, atmospheric pressure, relative humidity, and wind speed) in 166 Chinese cities. The cities were grouped into three clusters based on the socio-economic features. Time-series data from these cities in each cluster were analyzed in different pandemic phases. The robustness check refuted most potential causal relationships' estimations (89 out of 90). Only one potential relationship about air temperature passed the final test with a causal effect of 0.041 under a specific cluster-phase condition. The results indicate that the environmental factors are unlikely to cause noticeable aggravation of the COVID-19 pandemic. This study also demonstrated the high value and potential of the proposed method in investigating causal problems with observational data in environmental or other fields.

Trophic transfer potential of nTiO2, nZnO, and triclosan in an algae-algae eating fish food chain

Little is known about the trophic transfer of nanoparticles and personal care products via dietary exposure in an algae-algae eating fish food chain. The bioaccumulation of nano-TiO₂ (P25 - nTiO₂), nano-ZnO (nZnO), and triclosan (TCS) in eight different combinations were explored in this study through algae, Asterococcus superbus, to fish, Gyrinocheilus aymonieri. Results found the bioaccumulation of TCS changed with algal biomass, while the bioaccumulation of Ti and Zn varied with the amount of lipids and proteins in algal cells. In algae, Ti was in the form of nTiO₂ and Zn in the form of zinc ion. Due to dietary exposure, Ti and Zn quantity in fish was closely related to that in algae. The quantity of Ti and Zn in algae and fish exposed to the interaction of nTiO₂ * nZnO* TCS was higher than that in other treatments. The uptake of Ti and Zn in algae exposed to the interaction of nTiO₂ * nZnO had been inhibited, and the corresponding fish also had less Ti and Zn in their tissues. nTiO₂-containing treatments had higher Ti proportion in muscle than gill in fish. Treatment nZnO had the most Zn in gill, whereas nZnO * TCS-containing treatments had higher Zn proportion in gut than other tissues. No observation of TCS in fish in all treatments suggested the removal and metabolism of TCS might be induced by tissue recovery and acclimation. This is the first report on trophic transfer of mixed nanoparticles and personal care product in an algae-algae eating fish two-stage food chain.

Exploring the multilevel effects of triclosan from development, reproduction to behavior using Drosophila melanogaster

Triclosan (TCS) is widely used as an antibacterial agent, but its residue in the environment poses a great threat. In this study, Drosophila melanogaster were treated with series concentrations of TCS and the effects on development, behavior, reproduction, and oxidative stress indicators were investigated. The results showed that high concentrations of TCS severely interfered with the metamorphosis, resulting in lower hatching rate and longer development time. The hatching rate was only 75.00% ± 4.08% in 0.80 mg/mL TCS group. TCS also showed dose-dependent damage to the fertility of flies, causing ovarian defects and decreased the number of offspring. Almost no offspring adults hatched when exposed to high concentrations of TCS (0.50 and 0.80 mg/mL), and the hatching rate was 0% in 0.80 mg/mL TCS group. Larvae crawling, adult climbing and anti-starvation ability were also affected to varying degrees and showed hormesis. TCS could damage larval intestinal cells in a dose-dependent manner, and injury was lightened with culture time prolonging to 30 h. It is noteworthy that TCS caused redox imbalance with an increase on catalase (CAT) activity and decrease on reactive oxygen species (ROS) level. Our results conclude that TCS elicits multiple impacts on Drosophila and its rational use should be strengthened.

Exploring the effects of microalgal biomass on the oil behavior in a sand-water system

This study focused on the impact of microalgal biomass on the oil behavior in a sand-water system. The microalgal biomass was characterized, and the interaction between microalgal biomass and oil was analyzed through Fourier transform infrared (FTIR) spectroscopy. The effects of different conditions including microalgal biomass dose, pH, temperature, and salinity on the oil behavior were investigated. A two-level factorial analysis was also used to further explore the interactions of these conditions. The microalgal biomass was found to be the most influential parameter for the residual crude oil on sand. Higher microalgal biomass dose resulted in less residual oil on sand. The remaining oil decreased with increasing solution pH from 4 to 7, and an increase of remaining oil was observed when the pH was further increased above 7. In addition, temperature and salinity could affect the removal of crude oil in the presence of microalgal biomass. Increasing the temperature could result in less residual oil on sand and there was higher oil removal at the high salinity. The effects of microalgal biomass on the oil behavior could also be impacted by environmental conditions. The results of this study indicate that the presence of algae in the oiled shoreline can be considered in the comprehensive evaluation of spill risk and prediction of oil fate.

Interactions between microplastics and oil dispersion in the marine environment

Microplastics (MPs) and spilled oil are both major concerns in the marine environment. In this study, we investigated if and how MPs would interact with crude oil and potentially reduce the effectiveness of oil dispersants applied during oil spill response operations. With the addition of dispersant, MPs and oil (covered by dispersants through their hydrophobic tails) formed MPs-oil-dispersant agglomerates that were found to exist from the surface layer to the bottom of the seawater column. Their resurfacing and sinking led to a decrease in oil dispersion effectiveness. Effects of MP concentration, MP aging, and dispersant-to-oil volumetric ratios (DORs) on oil dispersion were examined. We found that the dispersion effectiveness of light oil and heavy oil decreased 38.26 % and 38.25 %, respectively, with an increased MP concentration. The dispersion effectiveness of light oil and heavy oil was 82.86 ± 10.87 % and 40.39 ± 4.96 % with pristine MPs and increased up to 109.75 ± 0.71 % and 58.30 ± 0.00 % when using MPs aged for 56 days. MPs reduced oil dispersion effectiveness under different DORs. The findings of this first report to understand the interactions among MPs, oil and dispersants have provided fundamental insights that may influence future decision making on the selection and use of oil spill response strategies.

Exploring the decentralized treatment of sulfamethoxazole-contained poultry wastewater through vertical-flow multi-soil-layering systems in rural communities

Sulfamethoxazole (SMX) is the most widely distributed sulfonamide antibiotics detected in decentralized poultry wastewater in rural communities. As an economically-feasible and eco-friendly technology for decentralized wastewater treatment in rural areas, vertical-flow multi-soil-layering (MSL) system was promising to mitigate the ecological and human health risks from SMX in such areas. The treatment of SMX-contained poultry wastewater by using MSL systems was investigated for the first time, and the main and interactive effects of related multiple variables on system performance were explored through factorial analysis, including material of permeable layer, concentration of SMX, and pH of influent. Results indicated that SMX concentration and pH of influent showed significantly negative effects on SMX removal. Medical stone used in MSL systems with larger surface area could intensify the SMX removal compared to anthracite. MSL systems showed stable performances on SMX removal with the best SMX removal efficiency more than 91%. A novel stepwise-cluster inference (SCI) model was developed for the first time to map the multivariate numeric relationships between state variables and SMX removal under discrete and nonlinear complexities. It was demonstrated that the effect of SMX in wastewater with high concentration was significant on the differentiation of soil bacteria composition in MSL systems based on microbial diversity analysis. These results can help better understand the mechanism of SMX removal in MSL systems from perspectives of factorial analysis, numeric modeling, and microbiological change.

Computational simulation associated with biological effects of alkyl organophosphate flame retardants with different carbon chain lengths on Chlorella pyrenoidosa

The environmental safety of flame retardants has attracted growing attention. Alkyl organophosphorus flame retardants (OPFRs) have been prevalently applied, but the potential risk and the structure effects of different alkyl chain lengths OPFRs on aquatic microalgae remain unknown. This study investigated the biological response of five alkyl-OPFRs to Chlorella pyrenoidosa by computational simulation together with biological approaches. The reduced docking energy had a significantly positive correlation (R² = 0.9) with the cell inhibition alongside the incremental chain length of alkyl-OPFRs. Molecular docking simulations suggested that the toxicity of alkyl-OPFRs would be highly correlated to their molecular structures. Coincidently, the reactive oxygen species, superoxide dismutase and malondialdehyde were triggered by 85%, 92% and 155% (based on the control group), after exposure to the longest chain length tributyl phosphate (TBP_C12), respectively. Furthermore, combining the ultrastructure scrutiny with the photosynthesis analysis, TBP_C12 was also found to significantly inhibit the chlorophyll biosynthesis (43%) and restrain the photosynthetic efficiency (26%) when compared with the control group. Overall, this is the first study to comprehensively reveal the biological effects of different alkyl-OPFRs on microalgae via the combination of computational simulation and cellular responses, providing a novel insight into targeted predicting the aquatic ecological risks of OPFRs.

Removal of arsenic from water through ceramic filter modified by nano-CeO2: A cost-effective approach for remote areas

The groundwater with high arsenic concentration is widespread, especially in many remote areas of developing countries. Arsenic existing in drinking water sources has a high risk to human health. In this study, an innovative effort to remove As(V) from water using ceramic filters functionalized with CeO₂ nanocomposites (CF-CeO₂) was investigated. Considering removal efficiency and flow rate, the suitable coating amount of CeO₂ was determined for the production of CF-CeO₂. Based on the factorial analysis, influent arsenic concentration and pH were found to be significant factors in As(V) removal. Furthermore, CF-CeO₂ exhibited a good removal capability over a wide pH range and was insensitive to the change of background electrolyte concentration. In the treatment of natural water, the existence of medium and low turbidity levels facilitated As(V) removing, while the high turbidity level exhibited the opposite effect. Based on macroscopic experiments and microscopic characterizations, it was revealed that the As(V) removal mechanism by the CF-CeO₂ mainly included ion-exchange and electrostatic attraction. The findings in this study provided convincing evidence for the use of CF-CeO₂ as a high-efficiency, low-cost, and safe approach for water purification in the remote areas of developing countries.

Toxicological effects induced by the biocide triclosan on Pseudokirchneriella subcapitata

Triclosan, a widely used biocide broadly found in aquatic environments, is cause of concern due to its unknown effects on non-targets organisms. In this study, a multi biomarker approach was used in order to evaluate the 72 h-effect of triclosan on the freshwater alga Pseudokirchneriella subcapitata (Raphidocelis subcapitata). Triclosan, at environmental relevant concentrations (27 and 37 μg L^-1), caused a decrease of proliferative capacity, which was accompanied by an increase of cell size and a profound alteration of algae shape. It was found that triclosan promoted the intracellular accumulation of reactive oxygen species, the depletion of non-enzymatic antioxidant defenses (reduced glutathione and carotenoids) and a decrease of cell metabolic activity. A reduction of photosynthetic pigments (chlorophyll a and b) was also observed. For the highest concentration tested (37 μg L^-1), a decrease of photosynthetic efficiency was detected along with a diminution of the relative transport rate of electrons on the photosynthetic chain. In conclusion, triclosan presents a deep impact on the microalga P. subcapitata morphology and physiology translated by multiple target sites instead of a specific point (cellular membrane) observed in the target organism (bacteria). Additionally, this study contributes to clarify the toxicity mechanisms of triclosan, in green algae, showing the existence of distinct modes of action of the biocide depending on the microalga.

Comprehensive evaluation of adsorption performances of carbonaceous materials for sulfonamide antibiotics removal

Sulfonamide antibiotics have highly toxic effects on humans and other organisms within the food chain. Adsorption by various carbonaceous materials is an effective method for removing them from the aqueous environment. Batch adsorption experiments were conducted between adsorbents and sulfamethoxazole (SMX) by studies of characterization, isotherm model, and kinetic model. The adsorption performances and mechanism of fifteen carbonaceous materials to remove SMX have been comprehensively evaluated. Results of the characterization showed that not only porosity, but also surface chemistry plays an important role in the adsorption process. Changes in the type and quantity of functional groups before and after adsorption are positive for the recyclability of carbonaceous materials. Moreover, kinetic studies showed that the adsorption process followed the pseudo-second-kinetic model and the intra-particle diffusion model. Four adsorbents (i.e., W-GAC, 3M-GAC, GP, and PAC) in this study have the best performance in each corresponding category in terms of the adsorption of SMX. Therefore, the results provide an indispensable reference for evaluating the adsorption performances of a variety of carbonaceous materials, and thus can support the selection of adsorbents for different applications. Graphical abstract.

Treatment of Wastewaters by Microalgae and the Potential Applications of the Produced Biomass—A Review

The treatment of different types of wastewater by physicochemical or biological (non-microalgal) methods could often be either inefficient or energy-intensive. Microalgae are ubiquitous microscopic organisms, which thrive in water bodies that contain the necessary nutrients. Wastewaters are typically contaminated with nitrogen, phosphorus, and other trace elements, which microalgae require for their cell growth. In addition, most of the microalgae are photosynthetic in nature, and these organisms do not require an organic source for their proliferation, although some strains could utilize organics both in the presence and absence of light. Therefore, microalgal bioremediation could be integrated with existing treatment methods or adopted as the single biological method for efficiently treating wastewater. This review paper summarized the mechanisms of pollutants removal by microalgae, microalgal bioremediation potential of different types of wastewaters, the potential application of wastewater-grown microalgal biomass, existing challenges, and the future direction of microalgal application in wastewater treatment.

Exploring the biophysicochemical alteration of green alga Asterococcus superbus interactively affected by nanoparticles, triclosan and illumination

Toxic effects on Asterococcus superbus were studied based on different combinations of P25-TiO₂, nano-ZnO and triclosan under multiple illumination conditions. A full factorial design (2 × 2×2 × 3) was implemented to explore interactive effects, and to identify significant factors. The results showed illumination is the most important factor with significance and becomes one of the main reasons to affect chlorophyll pigments, photosynthesis activity, unsaturated fatty acids, mitochondria function, and cause oxidative stress. Triclosan considerably affects cell viability, photosynthesis activity, lipid peroxidation and protein structure, for which triclosan is more significant than nano-ZnO. P25 is significant for oxidative stress, antioxidant enzyme, and lipid peroxidation. P25 * nano-ZnO is the only significant interaction of pollutants, affecting macromolecules, lipid peroxidation, and photosynthesis activity. High-order interactions play significant roles in affecting multiple molecular components. Two groups of endpoints are best to reflect alga responses to interactively effects from P25, nano-ZnO, and triclosan. One is ROS, chlorophyll pigments, TBARS, area, MTT, and MMP, and the other one is chlorophyll pigments, ROS, TBARS, CAT, MTT and SOD. Our findings can be instructive for a comprehensive comparison among interactions of multiple pollutants and environmental factors in natural waters, such that more robust environmental toxicity analyses can be performed.

X-ray fluorescence application in food, feed, and agricultural science: a critical review

Recently X-ray fluorescence techniques have been widely used in food and agricultural science areas. Minimal sample preparation, nondestructive analysis, high spatial resolution, and multiple elements measurements within a single sample are among its advantages. In this review, literature of X-ray fluorescence are extensively researched and summarized from food and agricultural science areas focusing on food safety inspection, food nutrition, plant science, soil science, and Ca-related problems in horticultural crops. In addition, the advantages and disadvantages of X-ray fluorescence comparing with traditional analytical techniques of elements are also discussed. The more advanced technology such as developments of detector, scanning system, beamline capability among others would significantly increase future application of X-ray fluorescence techniques. Combination use of XRF with other tools such as chemometrics or data analytics would greatly improve its prediction performance. These further improvements offer exciting perspectives for the application of X-ray fluorescence in the food and agricultural science areas.

Accumulation of metal-based nanoparticles in marine bivalve mollusks from offshore aquaculture as detected by single particle ICP-MS

The exposure risk of metal-based nanoparticles (NPs) to marine organisms and related food safety have attracted increasing attention, but the actual concentrations of these NPs in seawater and marine organisms are unknown. In this work, single particle inductively coupled plasma-mass spectrometry (spICP-MS) was used to quantify the concentrations and size distributions of NPs in different marine mollusks (oysters, mussels, scallops, clams, and ark shells) from an offshore aquaculture farm. Results showed that Ti, Cu, Zn, and Ag bearing NPs were detected in all the five mollusks with the mean sizes at 65.4-70.9, 72.2-89.6, 97.8-108.3, and 42.9-51.0 nm, respectively. The particle concentrations of Ti, Cu, Zn, and Ag bearing NPs in all mollusks (0.88-3.26 × 10⁷ particles/g fresh weight) were much higher than that in the seawater (0.46-0.79 × 10⁷ particles/mL), suggesting bio-accumulation of NPs. For all the five mollusks, Ag bearing NPs had the highest number-based bioconcentration factors (NBCFs) in all the tested NPs due to the smallest mean size of Ag bearing NPs in seawater (30.5 nm). In addition, the clams exhibited the lowest NBCFs of the four NPs than other mollusks. All four NPs were mainly accumulated in the gill and digestive gland, and could transfer to adductor muscle of all mollusks. Although all the four metals (Ti, Cu, Zn, Ag) in mollusks were safe for human consumption by the estimated daily intake (EDI) analysis, the risk of NPs remaining in the mollusks should be further considered when evaluating the toxicity of metals for human health. The findings could improve our understanding on the distribution and health risk of NPs in marine mollusks under offshore aquaculture.

Digital PCR as an Emerging Tool for Monitoring of Microbial Biodegradation

Biodegradation of contaminants is extremely complicated due to unpredictable microbial behaviors. Monitoring of microbial biodegradation drives us to determine (1) the amounts of specific degrading microbes, (2) the abundance, and (3) expression level of relevant functional genes. To this endeavor, the cultivation independent polymerase chain reaction (PCR)-based monitoring technique develops from endpoint PCR, real-time quantitative PCR, and then into novel digital PCR. In this review, we introduce these three categories of PCR techniques and summarize the timely applications of digital PCR and its superiorities than qPCR for biodegradation monitoring. Digital PCR technique, emerging as the most accurately absolute quantification method, can serve as the most promising and robust tool for monitoring of microbial biodegradation.