Selenium Metabolism in Hemp (Cannabis sativa L.)-Potential for Phytoremediation and Biofortification

Copper Stimulation of Tetrahydrocannabinol and Cannabidiol Production in Hemp (Cannabis sativa L.) Is Copper-Type, Dose, and Cultivar Dependent

Copper (Cu) is an element widely used as a pesticide for the control of plant diseases. Cu is also known to influence a range of plant secondary metabolisms. However, it is not known whether Cu influences the levels of the major metabolites in hemp (Cannabis sativa L.), tetrahydrocannabinol (THC) and cannabidiol (CBD). This study investigated the impact of Cu on the levels of these cannabinoids in two hemp cultivars, Wife and Merlot, under field conditions, as a function of harvest time (August-September), Cu type (nano, bulk, or ionic), and dose (50, 100, and 500 ppm). In Wife, Cu caused significant temporal increases in THC and CBD production during plant growth, reaching increases of 33% and 31% for THC and 51% and 16.5% for CBD by harvests 3 and 4, respectively. CuO nanoparticles at 50 and 100 ppm significantly increased THC and CBD levels, compared to the control, respectively, by 18% and 27% for THC and 19.9% and 33.6% for CBD. These nanospecific increases coincided with significantly more Cu in the inflorescences (buds) than in the control and bulk CuO treatments. Contrarily, no temporal induction of the cannabinoids by Cu was noticed in Merlot, suggesting a cultivar-specific response to Cu. However, overall, in Merlot, Cu ions, but not particulate Cu, induced THC and CBD levels by 27% and 36%, respectively, compared to the control. Collectively, our findings provide information with contrasting implications in the production of these cannabinoids, where, dependent on the cultivar, metabolite levels may rise above the 0.3% regulatory threshold for THC but to a more profitable level for CBD. Further investigations with a wider range of hemp cultivars, CuO nanoparticle (NP) doses, and harvest times would clarify the significance and broader implications of the findings.

Biodegradable chelating agents for enhancing phytoremediation: Mechanisms, market feasibility, and future studies

Heavy metals in soil significantly threaten human health, and their remediation is essential. Among the various techniques used, phytoremediation is one of the safest, most innovative, and effective. In recent years, the use of biodegradable chelators to assist plants in improving their remediation efficiency has gained popularity. These biodegradable chelators aid in the transformation of metal ions or metalloids, thereby facilitating their mobilization and uptake by plants. Developed countries are increasingly adopting biodegradable chelators for phytoremediation, with a growing emphasis on green manufacturing and technological innovation in the chelating agent market. Therefore, it is crucial to gain a comprehensive understanding of the mechanisms and market prospects of biodegradable chelators for phytoremediation. This review focuses on elucidating the uptake, translocation, and detoxification mechanisms of chelators in plants. In this study, we focused on the effects of biodegradable chelators on the growth and environmental development of plants treated with phytoremediation agents. Finally, the potential risks associated with biodegradable chelator-assisted phytoremediation are presented in terms of their availability and application prospects in the market. This study provides a valuable reference for future research in this field.

Compliance Testing of Hemp (Cannabis sativa L.) Cultivars for Total Delta-9 THC and Total CBD Using Gas Chromatography with Flame Ionization Detection

The United States Agriculture Improvement Act passed in December of 2018 legalized the growing of Cannabis sativa containing not more than 0.3% total Delta-9 tetrahydrocannabinol (THC) in the country. While Cannabis sativa has been cultivated for hundreds of years, the illegal status of the plant in the United States, and elsewhere, has hindered the development of plant cultivars that meet this legal definition. To assess sampling strategies, and conformance to the THC limit, 14 cultivars of hemp were grown and tested by using gas chromatography with flame ionization detection for total delta-9 THC and total cannabidiol (CBD) during 2020, 2021 and 2022. Each year, samples of fresh plant material were collected from each cultivar weekly, beginning in mid-August and ending in late October, to examine the rate of increase in THC and CBD for different cultivars and select individual plants. The sampling demonstrated that both CBD and THC increase rapidly over a 1-2-week time frame with maximum concentrations (about 16% and 0.6%, respectively) around late September to early October. The testing of individual plants on the same day for select cultivars showed that while the ratio of CBD to THC remains constant (about 20:1 in compliant hemp) during the growing season, the individual plants are highly variable in concentration. Whereas previous studies have shown cultivar-dependent variability in THC production, this study demonstrated a novel plant-to-plant variability in the levels of THC within the same hemp cultivar. Understanding variability within and between hemp cultivars is useful to determine field sampling strategies and to assess the risk of crop embargoes to growers by compliance regulators.

Selenium biofortification improves bioactive composition and antioxidant status in Plantago ovata Forsk., a medicinal plant

BACKGROUND

Selenium (Se) is an essential micronutrient for humans, but its deficiency as well as toxicity affects large number of people worldwide. Plantago ovata, a commercially important medicinal plant, is mainly cultivated in western regions of India, where elevated levels of Se have been found in soil. Thus, we evaluated the potential of Se biofortification in P. ovata via phytoremediation and its effect on the bioactive composition.

RESULTS

The results showed a significant alteration in various morphological and physiological parameters in a dose-dependent manner. The 10 µM Se dose improved seedling height, biomass and total chlorophyll content. There was a gradual increase in total Se content, with highest accumulation of 457.65 µg/g FW at 500 µM Se treatment. Se positively affected the antioxidative metabolism which was measured from the change in total antioxidant capacity, radical scavenging activity and Metallothionein 2 expression. Increasing levels of Se also affected the PAL activity, total polyphenol and flavonoid content. Caffeic acid, Coumaric acid and Rutin were found to be the most abundant phenolic compounds.

CONCLUSIONS

Low levels of selenium (below 50 µM) can successfully improve Se accumulation and elicit production of various polyphenols without hampering plant growth. Thus, Se fortification of P. ovata seedlings via phytoremediation appears to be a feasible and efficient way to enhance its nutraceutical value in dietary products.

Relative bioavailability of selenium in rice using a rat model and its application to human health risk assessment

Deficiencies of selenium (Se), a necessary microelement for humans, can be remedied by appropriately supplying Se-enriched rice. However, overconsumption of Se-enriched rice poses a potential risk. To accurately assess Se human health risks associated with Se-enriched rice consumption, we developed a rat in vivo model to systematically explore the relative bioavailability of Se (Se-RBA) from Se-enriched rice from a wide geographic range. Se concentrations were in the range of 0.06 ± 0.05 to 0.15 ± 0.15 mg kg-1, averaging 0.12 ± 0.11 mg kg-1, in 196 rice samples from 21 Chinese provinces, and selenomethionine (SeMet) was the dominant Se fraction (58.0-96.5%). The Se-RBA of Se-enriched rice calculated from urine ranged from 34.86% to 102.29%, averaging 62.27% (n = 12), and was positively correlated with the proportion of SeMet in rice (p < 0.05, R2 = 0.51). Furthermore, the Se intake calculated based on the Se-RBA indicated that the Se intake of consumers of Se-enriched rice was far less than the tolerable upper intake level. Thus, the limits established by law assume overestimates of the actual nutritional value of the Se content in Se-enriched rice, and it is important to consider Se bioavailability. The current study offers suggestions for future research and provides methods to reduce the uncertainty in estimating the health risks associated with Se intake from rice.

A novel slow-release selenium approach for cadmium reduction and selenium enrichment in rice (Oryza sativa L.)

In this study, a novel slightly-soluble selenium (Se) fertilizer (SSF) was successfully applied to address the problems of Cd pollution in paddy soil and rice, and Se deficiency in human beings. The pot and field experiments showed that Cd content in the rice grains was reduced by 48.4%-82.89% and Se content was increased nearly by 30-fold comparing the control group. The application of SSF increased the soil pH and significantly reduced the DGT-extracted Cd in the soil. Moreover, DCB-extractable Fe content on the surface of roots was prompt by SSF, which formed a physical barrier, namely iron plaque (IP), to inhibit Cd translocation to the above-ground tissues of the rice plants. The Cd content in the IP was also decreased before the filling period, possibly contributing to the reduction in major Cd accumulation in the rice grains. In addition, the continuous Se increase and Cd reduction in the IP by the SSF gradually exceeded that of water-soluble Se during the three periods of rice plant growth. This suggests that SSF has high potential to be an effective Se fertilizer for inhibiting Cd uptake and enriching Se in rice.

Omics approaches in effective selection and generation of potential plants for phytoremediation of heavy metal from contaminated resources

Soil and water pollution, rapid industrialization, contaminated irrigation-water, increased waste-production and surge in agricultural land leads to the accumulation of Heavy Metals (HM) with time. HM contamination has raised concern over the past years and new remediation strategies are required to deal with it. HM-contaminated soil is often used for the production of food, which makes a gateway for toxic metals into the food-chain, thereby affecting food security and human health. To avoid HM-toxicity, decontamination of important resources is essential. Therefore, exploring phytoremediation for the removal, decomposition and detoxification of hazardous metals from HM-contaminated sites is of great significance. Hyper-accumulator plants can efficiently remove HMs. However, despite many hyper-accumulator plant species, there is a research gap in the studies of phytotechnology. Hence biotechnological efforts advocating omics studies i.e. genomics, transcriptomics, proteomics, metabolomics and phenomics are in order, the purpose being to select and enhance a plant's potential for the process of phytoremediation to be more effective. There is a need to study newly developed high-efficiency hyper-accumulator plants as HM-decontaminator candidates for phytoremediation and phytomining. Therefore, this review focuses on various strategies and bio-technological methods for the removal of HM contaminants from sites, with emphasis on the advancement of phytoremediation, along with applications in cleaning up various toxic pollutants.

Arbuscular mycorrhizal fungi influence the uptake of cadmium in industrial hemp (Cannabis sativa L.)

Phytoremediation is currently a more environmentally friendly and economical measure for the remediation of cadmium (Cd) contaminated soil. Heavy metal-resistant plant species, Cannabis sativa L. was inoculated with Rhizophagus irregularis to investigate the mechanisms of mycorrhizal in improving the Cd remediation ability of C. sativa. The results showed that after inoculation with R. irregularis, C. sativa root Cd contents increased significantly, and leaf Cd enrichment decreased significantly. At the transcriptional level, R. irregularis down-regulated the expression of the ABC transporter family but up-regulated differentially expressed genes regulating low molecular weight organic acids. The levels of malic acid, citric acid, and lactic acid were significantly increased in the rhizosphere soil, and they were significantly and strongly related to oxidizable Cd concentrations. Then citric acid levels were considerably and positively connected to exchangeable Cd concentrations. Our findings revealed that through regulating the movement of root molecules, arbuscular mycorrhizal fungus enhanced the heavy metal tolerance of C. sativa even more, meanwhile, they changed the Cd chemical forms by altering the composition of low molecular weight organic acids, which in turn affected soil Cd bioavailability.

Assessment of selenium and zinc enriched sludge and duckweed as slow-release micronutrient biofertilizers for Phaseolus vulgaris growth

Selenium (Se) and zinc (Zn) are essential micronutrients that are often lacking in the diet of humans and animals. Application of mineral Se and Zn fertilizers into soils may lead to a waste of Se and Zn due to the fast leaching and low utilization by plants. Slow-release Se and Zn biofertilizer may therefore be beneficial. This study aims to assess the potential of SeZn-enriched duckweed and sludge produced from wastewater as slow-release Se and Zn biofertilizers. Pot experiments with green beans (Phaseolus vulgaris) and sampling of Rhizon soil pore water were conducted to evaluate the bioavailability of Se and Zn in sandy and loamy soils mixed with SeZn-enriched duckweed and sludge. Both the Se and Zn concentrations in the soil pore water increased upon amending the two biomaterials. The concentration of Se released from SeZn-enriched duckweed rapidly decreased in the first 21 days and slowly declined afterwards, while it remained stable during the entire experiment upon application of SeZn-enriched sludge. The Zn content in the soil pore water gradually increased over time. The application of SeZn-enriched duckweed and sludge significantly increased the Se concentrations in plant tissues, in particular in the form of organic Se-methionine in seeds, without a negative impact on plant growth when an appropriate dose was applied (1 mg Se/kg soil). While, it did not increase Zn concentrations in plant seeds. The results indicate that the SeZn-enriched duckweed and sludge could be only used as organic Se biofertilizers for Se-deficient soils. Particularly, the SeZn-enriched sludge dominated with elemental nano-Se was an effective Se source and slow-release Se biofertilizer. These results could offer a theoretical reference to choose an alternative to chemical Se fertilizers for biofortification, avoiding the problem of Se losses by leaching from mineral Se fertilizers while recovering resources from wastewater. This could contribute to the driver for a future circular economy.

Treatment of Ginkgo biloba with Exogenous Sodium Selenite Affects Its Physiological Growth, Changes Its Phytohormones, and Synthesizes Its Terpene Lactones

Ginkgolide is a unique terpenoid natural compound in Ginkgo biloba, and it has an important medicinal value. Proper selenium has been reported to promote plant growth and development, and improve plant quality, stress resistance, and disease resistance. In order to study the effects of exogenous selenium (Se) on the physiological growth and the content of terpene triolactones (TTLs) in G. biloba seedlings, the seedlings in this work were treated with Na2SeO3. Then, the physiological indexes, the content of the TTLs, and the expression of the related genes were determined. The results showed that a low dose of Na2SeO3 was beneficial to plant photosynthesis as it promoted the growth of ginkgo seedlings and increased the root to shoot ratio. Foliar Se application significantly increased the content of soluble sugar and protein and promoted the content of TTLs in ginkgo leaves; indeed, it reached the maximum value of 7.95 mg/g in the ninth week, whereas the application of Se to the roots inhibited the synthesis of TTLs. Transcriptome analysis showed that foliar Se application promoted the expression levels of GbMECPs, GbMECT, GbHMGR, and GbMVD genes, whereas its application to the roots promoted the expression of GbDXS and GbDXR genes. The combined analysis results of metabolome and transcriptome showed that genes such as GbDXS, GbDXR, GbHMGR, GbMECPs, and GbCYP450 were significantly positively correlated with transcription factors (TFs) GbWRKY and GbAP2/ERF, and they were also positively correlated with the contents of terpene lactones (ginkgolide A, ginkgolide B, ginkgolide M, and bilobalide). Endogenous hormones (MeJA-ILE, ETH, and GA7) were also involved in this process. The results suggested that Na2SeO3 treatment affected the transcription factors related to the regulation of endogenous hormones in G. biloba, and further regulated the expression of genes related to the terpene synthesis structure, thus promoting the synthesis of ginkgo TTLs.

Comparison of State-Level Regulations for Cannabis Contaminants and Implications for Public Health

BACKGROUND

The presence of contaminants in cannabis presents a potential health hazard to recreational users and susceptible patients with medical conditions. Because of the federally illegal status of cannabis, there are no unified regulatory guidelines mitigating the public health risk of cannabis contaminants.

OBJECTIVE

To inform further research and provide solutions to the public health risk of cannabis contaminants at a national level, we examined the current landscape of state-level contaminant regulations, and cannabis contaminants of concern, as well as patient populations susceptible to contaminants.

METHODS

We examined the regulatory documents for medical and recreational cannabis in all legalized U.S. jurisdictions and compiled a complete list of regulated contaminants, namely, pesticides, inorganics, solvents, microbes, and mycotoxins. We data mined the compliance testing records of 5,654 cured flower and 3,760 extract samples that accounted for ∼6% of California's legal cannabis production in 2020-2021. We also reviewed the publicly available medical cannabis use reports to tabulate the susceptible patient populations.

RESULTS

As of 18 May 2022, 36 states and the District of Columbia listed a total of 679 cannabis contaminants as regulated in medical or recreational cannabis, including 551 pesticides, 74 solvents, 12 inorganics, 21 microbes, 5 mycotoxins, and 16 other contaminants. Different jurisdictions showed significant variations in regulated contaminants and action levels ranging up to four orders of magnitude. A failure rate of 2.3% was identified for flowers and 9.2% for extracts in the California samples. Insecticides and fungicides were the most prevalent categories of detected contaminants, with boscalid and chlorpyrifos being the most common. The contaminant concentrations fell below the regulatory action levels in many legalized jurisdictions, indicating a higher risk of contaminant exposure. Cannabis use reports indicated usage in several patient populations susceptible to contamination toxicity, including cancer (44,318) and seizure (21,195) patients.

DISCUSSION

Although individual jurisdictions can implement their policies and regulations for legalized cannabis, this study demonstrates the urgent need to mitigate the public health risk of cannabis contamination by introducing national-level guidelines based on conventional risk assessment methodologies and knowledge of patients' susceptibility in medical use. https://doi.org/10.1289/EHP11206.

Potential of Industrial Hemp for Phytoremediation of Heavy Metals

The accumulation of anthropogenic heavy metals in soil is a major form of pollution. Such potentially toxic elements are nonbiodegradable and persist for many years as threats to human and environmental health. Traditional forms of remediation are costly and potentially damaging to the land. An alternative strategy is phytoremediation, where plants are used to capture metals from the environment. Industrial hemp (Cannabis sativa) is a promising candidate for phytoremediation. Hemp has deep roots and is tolerant to the accumulation of different metals. In addition, the crop biomass has many potential commercial uses after harvesting is completed. Furthermore, the recent availability of an annotated genome sequence provides a powerful tool for the bioengineering of C. sativa for better phytoremediation.

Improved phytoremediation of heavy metal contaminated soils by Miscanthus floridulus under a varied rhizosphere ecological characteristic

Miscanthus floridulus is a plant with high biomass and heavy metal tolerance, which is a good candidate for phytoremediation. It is essential to explore how to improve its remediation ability, especially the rhizosphere ecological characteristics which are significant for phytoremediation efficiency. Therefore, the heavy metals accumulation of M. floridulus, rhizosphere soil physicochemical properties, enzyme activities, and bacterial community of different distances from the tailing were measured, focusing on the relationship between phytoremediation ability and rhizosphere ecological characteristics. The results show that the stronger the phytoremediation ability is, the better is the soil environment, and the higher the coverage with plants. Soil rhizosphere environment and the phytoremediation ability are shaped by heavy metals. Rhizosphere microecology may regulate phytoremediation by improving soil nutrients and enzyme activities, alleviating heavy metal toxicity, changing rhizosphere microbial community structure, increasing beneficial microbial abundance, promoting heavy metals accumulation by plants. This study not only clarified the relationship between rhizosphere ecological factors, but also elucidated the phytoremediation regulatory mechanism. Some of microbial taxa might developed as biological bioinoculants, providing the possibility to promote the growth of plants with ecological restoration ability and improve the phytoremediation efficiency.

Exploiting Beneficial Pseudomonas spp. for Cannabis Production

Among the oldest domesticated crops, cannabis plants (Cannabis sativa L., marijuana and hemp) have been used to produce food, fiber, and drugs for thousands of years. With the ongoing legalization of cannabis in several jurisdictions worldwide, a new high-value market is emerging for the supply of marijuana and hemp products. This creates unprecedented challenges to achieve better yields and environmental sustainability, while lowering production costs. In this review, we discuss the opportunities and challenges pertaining to the use of beneficial Pseudomonas spp. bacteria as crop inoculants to improve productivity. The prevalence and diversity of naturally occurring Pseudomonas strains within the cannabis microbiome is overviewed, followed by their potential mechanisms involved in plant growth promotion and tolerance to abiotic and biotic stresses. Emphasis is placed on specific aspects relevant for hemp and marijuana crops in various production systems. Finally, factors likely to influence inoculant efficacy are provided, along with strategies to identify promising strains, overcome commercialization bottlenecks, and design adapted formulations. This work aims at supporting the development of the cannabis industry in a sustainable way, by exploiting the many beneficial attributes of Pseudomonas spp.

Selenium-agarose hybrid hydrogel as a recyclable natural substrate for selenium-enriched cultivation of mung bean sprouts

Selenium (Se) is an essential trace element for human beings and animals. Traditional plant Se enrichment technology suffers from selenium pollution. Herein, environmentally friendly Se-agarose (Se-Agar) hybrid hydrogels are prepared by simply mixing agar with different Se species including selenocarrageenan (SeCA), selenite and Se yeast under heating and stirring for 0.5 h without any other reagent. Such Se-Agar hybrid hydrogels with excellent biocompatibility were used as natural substrates for the cultivation of Se-enriched mung bean sprouts. Compared with Se yeast, SeCA and selenite show a better Se enrichment effect on mung bean sprouts. Furthermore, the growth indices including plant weight and plant height of mung bean sprouts were investigated with different concentrations and sources of Se. Notably, the Se-Agar hybrid hydrogels could be easily regenerated and reused for multiple cycles. The results indicated that Se-Agar hybrid hydrogels as recyclable natural substrates offer a simple, sustainable and affordable strategy for plant Se enrichment.

Influence of the Use of an Ionic Liquid as Pre-Hydrodistillation Maceration Medium on the Composition and Yield of Cannabis sativa L. Essential Oil

Cannabis sativa L. is a multi-purpose crop, whose resilience, adaptability and soil-enriching properties make it a low-impact production. In the last years, the cultivation of the "industrial" hemp varieties (THC < 0.2%) has been promoted by many Countries, opening a whole new market of hemp-derived products, such as its essential oil (EO). Its distillation might represent an effective method to exploit a residue of the hemp fiber production (flowers), complying with the guidelines of the circular economy. In the present work, different concentrations of an ionic liquid (IL; 1,3-dimethyl-1H-imidazol-3-ium dimethylphosphate) have been studied as a pre-hydrodistillation maceration medium. The EO yields have been evaluated, and their compositions have been analyzed by GC-EIMS. The use of 100% and 90% IL concentrations gave a hydrodistillation yield increment of 250% and 200%, respectively. The 200% yield increase was maintained when the 100% IL was recycled after the hydrodistillation. The lower IL concentrations incremented the cannabinoid and oxygenated sesquiterpene contents, while the opposite was true for sesquiterpene hydrocarbons. The proposed IL-enhanced hydrodistillation medium applied to hemp, studied for the first time in the present work, might be used to both (i) noteworthy increment the hydrodistillation yield and (ii) modulate the obtained EO composition based on the desired final product.

Roles of selenium in mineral plant nutrition: ROS scavenging responses against abiotic stresses

Agronomic biofortification of crops with selenium (Se) is an important strategy to minimize hidden hunger and increase nutrient intake in poor populations. Selenium is an element that has several physiological and biochemical characteristics, such as the mitigation of different types of abiotic stress. Selenoproteins act as powerful antioxidants in plant metabolism through the glutathione peroxidase (GSH) pathway, and provide an increased activity for enzymatic (SOD, CAT, and APX) and non-enzymatic (ascorbic acid, flavonoids, and tocopherols) compounds that act in reactive oxygen species (ROS) scavenging system and cell detoxification. Selenium helps to inhibit the damage caused by climate changes such as drought, salinity, heavy metals, and extreme temperature. Also, Se regulates antenna complex of photosynthesis, protecting chlorophylls by raising photosynthetic pigments. However, Se concentrations in soils vary widely in the earth's crust. Soil Se availability regulates the uptake, transport, accumulation, and speciation in plants. Foliar Se application at the concentration 50 g ha^-1 applied as sodium selenate increases the antioxidant, photosynthetic metabolism, and yield of several crops. Foliar Se application is a strategy to minimize soil adsorption and root accumulation. However, the limit between the beneficial and toxic effects of Se requires research to establish an optimal dose for each plant species under different edaphoclimatic conditions. In this review, we present the compilation of several studies on agronomic biofortification of plants with Se to ensure food production and food security to mitigate hidden hunger and improve the health of the population.

Converting loess into zeolite for heavy metal polluted soil remediation based on "soil for soil-remediation" strategy

Both soil erosion and soil contamination pose critical environmental threats to the Chinese Loess Plateau (CLP). Green, efficient and feasible remediation technologies are highly demanded to meet these challenges. Herein we propose a unique "soil for soil-remediation" strategy to remediate the heavy metal polluted soil in CLP by converting loess into zeolite for the first time. With a simple template-free route, the natural loess can be converted into cancrinite (CAN) type of zeolite. A highly crystalline CAN was obtained via hydrothermal treatment at 240 ^oC for 48 h, with a precursor alkalinity of Na/(Si+Al)> 2.0. The as-synthesized CAN zeolite exhibits excellent remediation performance for Pb(II) and Cu(II) polluted soil. Plant assay experiment demonstrates that CAN can significantly restrain the uptake and accumulation of Pb(II) and Cu(II) ions in vegetables, with a high removal efficiency up to 90.7% and 81.4%, respectively. This work demonstrates a "soil for soil-remediation" strategy to utilize the natural loess for soil remediation in CLP, which paves the way for developing green and sustainable remediation eco-materials with local loess as raw materials.

Virtual Screening of C. Sativa Constituents for the Identification of Selective Ligands for Cannabinoid Receptor 2

The selective targeting of the cannabinoid receptor 2 (CB2) is crucial for the development of peripheral system-acting cannabinoid analgesics. This work aimed at computer-assisted identification of prospective CB2-selective compounds among the constituents of Cannabis Sativa. The molecular structures and corresponding binding affinities to CB1 and CB2 receptors were collected from ChEMBL. The molecular structures of Cannabis Sativa constituents were collected from a phytochemical database. The collected records were curated and applied for the development of quantitative structure-activity relationship (QSAR) models with a machine learning approach. The validated models predicted the affinities of Cannabis Sativa constituents. Four structures of CB2 were acquired from the Protein Data Bank (PDB) and the discriminatory ability of CB2-selective ligands and two sets of decoys were tested. We succeeded in developing the QSAR model by achieving Q² 5-CV > 0.62. The QSAR models helped to identify three prospective CB2-selective molecules that are dissimilar to already tested compounds. In a complementary structure-based virtual screening study that used available PDB structures of CB2, the agonist-bound, Cryogenic Electron Microscopy structure of CB2 showed the best statistical performance in discriminating between CB2-active and non-active ligands. The same structure also performed best in discriminating between CB2-selective ligands from non-selective ligands.

Selenium biofortification in the 21st century: status and challenges for healthy human nutrition

BACKGROUND

Selenium (Se) is an essential element for mammals and its deficiency in the diet is a global problem. Plants accumulate Se and thus represent a major source of Se to consumers. Agronomic biofortification intends to enrich crops with Se in order to secure its adequate supply by people.

SCOPE

The goal of this review is to report the present knowledge of the distribution and processes of Se in soil and at the plant-soil interface, and of Se behaviour inside the plant in terms of biofortification. It aims to unravel the Se metabolic pathways that affect the nutritional value of edible plant products, various Se biofortification strategies in challenging environments, as well as the impact of Se-enriched food on human health.

CONCLUSIONS

Agronomic biofortification and breeding are prevalent strategies for battling Se deficiency. Future research addresses nanosized Se biofortification, crop enrichment with multiple micronutrients, microbial-integrated agronomic biofortification, and optimization of Se biofortification in adverse conditions. Biofortified food of superior nutritional quality may be created, enriched with healthy Se-compounds, as well as several other valuable phytochemicals. Whether such a food source might be used as nutritional intervention for recently emerged coronavirus infections is a relevant question that deserves investigation.