Vitamin E Encapsulation in Plant-Based Nanoemulsions Fabricated Using Dual-Channel Microfluidization: Formation, Stability, and Bioaccessibility

Plant-Based Oil-in-Water Food Emulsions: Exploring the Influence of Different Formulations on Their Physicochemical Properties

The global focus on incorporating natural ingredients into the diet for health improvement encompasses ω-3 polyunsaturated fatty acids (PUFAs) derived from plant sources, such as flaxseed oil. ω-3 PUFAs are susceptible to oxidation, but oil-in-water (O/W) emulsions can serve to protect PUFAs from this phenomenon. This study aimed to create O/W emulsions using flaxseed oil and either soy lecithin or Quillaja saponins, thickened with modified starch, while assessing their physical properties (oil droplet size, ζ-potential, and rheology) and physical stability. Emulsions with different oil concentrations (25% and 30% w/w) and oil-to-surfactant ratio (5:1 and 10:1) were fabricated using high-pressure homogenization (800 bar, five cycles). Moreover, emulsions were thickened with modified starch and their rheological properties were measured. The physical stability of all emulsions was assessed over a 7-day storage period using the TSI (Turbiscan Stability Index). Saponin-stabilized emulsions exhibited smaller droplet diameters (0.11-0.19 µm) compared to lecithin (0.40-1.30 µm), and an increase in surfactant concentration led to a reduction in droplet diameter. Both surfactants generated droplets with a high negative charge (-63 to -72 mV), but lecithin-stabilized emulsions showed greater negative charge, resulting in more intense electrostatic repulsion. Saponin-stabilized emulsions showed higher apparent viscosity (3.9-11.6 mPa·s) when compared to lecithin-stabilized ones (1.19-4.36 mPa·s). The addition of starch significantly increased the apparent viscosity of saponin-stabilized emulsions, rising from 11.6 mPa s to 2117 mPa s. Emulsions stabilized by saponin exhibited higher stability than those stabilized by lecithin. This study confirms that plant-based ingredients, particularly saponins and lecithin, effectively produce stable O/W emulsions with flaxseed oil, offering opportunities for creating natural ingredient-based food emulsions.

Zein/hyaluronic acid nanoparticle stabilized Pickering emulsion for astaxanthin encapsulation

Pickering emulsions have attracted considerable attention owing to the stability and functionality. In this study, zein/hyaluronic acid (ZH) nanoparticles were prepared and applied for stabilizing astaxanthin encapsulated Pickering emulsions. By non-covalent interaction between Zein and hyaluronic acid (HA), the conformation of zein changed and therefore improved the wettability of ZH nanoparticles. Unlike the spherical zein nanoparticles, ZH nanoparticles possessed a cross-linked structure with rough surface. Confocal laser scanning microscopy indicated that the nanoparticles accumulated at the oil-water interface. The Pickering emulsion stabilized by ZH nanoparticles exhibited high viscoelasticity and a solid-like behavior, as well as excellent stability during the storage. In vitro digestion results revealed that the presence of HA coating prevented the emulsion from pepsin hydrolysis and achieved efficient delivery of astaxanthin. This work confirmed that Pickering emulsion stabilized by ZH nanoparticles could be used as an effective deliver system for bioactive substances.

Nano-engineered vitamins as a potential epigenetic modifier against environmental air pollutants

Air pollution has emerged as a serious threat to human health due to close association with spectrum of chronic ailments including cardiovascular disorders, respiratory diseases, nervous system dysfunctions, diabetes and cancer. Exposure to air-borne pollutants along with poor eating behaviours and inferior dietary quality irreversibly impacts epigenomic landscape, leading to aberrant transcriptional control of gene expression which is central to patho-physiology of non-communicable diseases. It is assumed that nutriepigenomic interventions such as vitamins can control such adverse effects through their immediate action on mitochondrial epigenomic-axis. Importantly, the exhaustive clinical utility of vitamins-interceded epigenetic synchronization is not well characterized. Therefore, improving the current limitations linked to stability and bioavailability issues in vitamin formulations is highly warranted. The present review not only sums up the available data on the role of vitamins as potential epigenetic modifiers but also discusses the importance of nano-engineered vitamins as potential epidrugs for dietary and pharmacological intervention to mitigate the long-term effects of air pollution toxicity.

Influence of Proteins on Bioaccessibility of α-Tocopherol Encapsulation within High Diacylglycerol-Based Emulsions

α-Tocopherol has been widely used in medicine, cosmetics, and food industry as a nutritional supplement and antioxidant. However, α-tocopherol showed low bioaccessibility, and there is a widespread α-tocopherol deficiency in society today. The preparation of oil-in-water emulsions with high safety and low-calorie property is necessary. The aim of this research was to investigate the effects of different protein emulsifiers (whey protein isolate (WPI), soy protein isolate (SPI), and sodium casein (SC)) on the properties of emulsions delivery system, and diacylglycerol (DAG) was picked as a low-accumulated lipid. The interfacial changes, microstructural alterations, and possible interactions of the protein-stabilized DAG emulsions were investigated during the in vitro digestion. The results show that different proteins affect the degree of digestibility and α-tocopherol bioaccessibility of the emulsions. Both WPI- and SPI-coated emulsions showed good digestibility and α-tocopherol bioaccessibility (77.64 ± 2.93%). This might be due to the strong hydrolysis resistance of WPI (β-lactoglobulin) and the good emulsification ability of SPI. The SC-coated emulsion showed the lowest digestibility and α-tocopherol bioaccessibility, this might be due to the emulsification property of hydrolysis products of SC and the potential interaction with calcium ions. This study provides new possibilities for the application of DAG emulsions in delivery systems.

Structural modification of zein-based oil-in-glycerol emulsion gels for improved textural and digestion behaviors

Zein can dissolve in glycerol, and can be developed into oil-in-glycerol emulsion gels to widen its applications. The current study focused on modulating the structures of zein-based emulsion gels by the addition of a surface active ingredient (Span 20, SP) to improve textural and digestion behaviors. Microstructural observation indicated that the addition of SP replaced zein from the oil-glycerol interface, and allowed a higher level of oil droplet aggregation. After adding SP, the gel hardness decreased from 3.43 ± 0.14 N to 1.62 ± 0.01 N, and the storage modulus also decreased with the increase of SP content. Viscoelasticity of the gels was thermo-responsive, and the presence of SP contributed to a higher recovery of the storage modulus after the heating-cooling process. The addition of SP reduced the oil-binding capacity of zein gel from 97.61 ± 0.19% to 82.00 ± 0.92% and the solvent-binding capacity from 75.97 ± 3.05% to 62.25 ± 0.22%, indicating that the zein network was weakened. Then, gels were mixed with simulated digestive juices to track the changes of gel structures and the release of free fatty acids. The addition of SP accelerated the digestion process, especially intestinal digestion. SP contributed to a higher fluorescence intensity in the digesta, which was a sign of a higher level of digestion of zein. Subsequently, the addition of SP increased the release content of free fatty acids from 4.27 ± 0.71% to 5.07 ± 1.27%. The above findings would be useful in designing zein-based functional food products with favored textural and digestion properties.

Unification of medicines and excipients: The roles of natural excipients for promoting drug delivery

INTRODUCTION

Drug delivery systems (DDSs) formed by natural active compounds be instrumental in developing new green excipients and novel DDS from natural active compounds (NACs). 'Unification of medicines and excipients'(UME), the special inherent nature of the natural active compounds, provides the inspiration and conduction to achieve this goal.

AREAS COVERED

This review summarizes the typical types of NACs from herbal medicine, such as saponins, flavonoids, polysaccharides, etc. that act as excipients and their main application in DDS. The comparison of the drug delivery systems formed by NACs and common materials and the primary formation mechanisms of these NACs are also introduced to provide a deepened understanding of their performance in DDS.

EXPERT OPINION

Many natural bioactive compounds, such as saponins, polysaccharides, etc. have been used in DDS. Diversity of structure and pharmacological effects of NACs turn out the unique advantages in improving the performance of DDSs like targeting ability, adhesion, encapsulation efficiency(EE), etc. and enhancing the bioavailability of loaded drugs.

Natural carriers: Recent advances in their use to improve the stability and bioaccessibility of food active compounds

In the last decades, the incorporation of bioactive compounds in food supplements aroused the attention of scientists. However, these ingredients often exhibit both low solubility and stability and their poor bioaccessibility within the gastrointestinal tract limits their effectiveness. To overcome these drawbacks, many carriers have been investigated for encapsulating nutraceuticals and enhancing their bioavailability. It is note that several different vegetable wall materials have been applied to build delivery systems. Considering their encapsulation mechanism, lipid and protein-based carriers display specific interaction patterns with bioactives, whereas polysaccharidic-based carriers can entrap them by creating porous highly stable networks. To maximize the encapsulation efficiency, mixed systems are very promising. Following the current goal of using natural and sustainable ingredients, only a limited number of studies about the isolation of new ingredients from agro-food waste are available. In this review, a comprehensive overview of the state of art in the development of innovative natural lipid-, protein- and polysaccharide-based plant carriers is presented, focusing on their application as food active compounds. Different aspects to be considered in the design of delivery systems are discussed, including the carrier structure and chemical features, the interaction between the encapsulating and the core material, and the parameters affecting bioactives entrapment.

Stabilizer-free Vitamin E Nanovehicle for Biological Research

In molecular biology research, a vitamin E (VE) vehicle (VE dissolved in organic solvent) is often added to water media without a stabilizer. However, the detailed behavior of VE colloids in water media is unclear. In this study, we reveal that VE nanoemulsion readily forms in water-based media through the existing protocol. The colloid size was changed from 39 nm to the submicron scale by adjusting the initial concentration of the VE solution and adding a buffer. The radical scavenging effect of the dispersed nanosized VEs is comparable to that of the water-soluble antioxidant Trolox, providing excellent antioxidant performance in colloid form. The cytoprotection effect of the VE colloids under a lipid oxidation condition largely depends on the size of the nanodispersion. Smaller dispersed particles are more efficient radical scavengers than larger particles for a constant VE amount owing to sophisticated uptake behavior of cell. This unveiled fundamental knowledge pave the way for a preparative protocol of stabilizer-free VE vehicles, which are expected to become widely used in molecular biology research.

Nano-enabled plant-based colloidal delivery systems for bioactive agents in foods: Design, formulation, and application

Consumers are becoming increasingly aware of the impact of their dietary choices on the environment, animal welfare, and health, which is causing many of them to adopt more plant-based diets. For this reason, many sectors of the food industry are reformulating their products to contain more plant-based ingredients. This article describes recent research on the formation and application of nano-enabled colloidal delivery systems formulated from plant-based ingredients, such as polysaccharides, proteins, lipids, and phospholipids. These delivery systems include nanoemulsions, solid lipid nanoparticles, nanoliposomes, nanophytosomes, and biopolymer nanoparticles. The composition, size, structure, and charge of the particles in these delivery systems can be manipulated to create novel or improved functionalities, such as improved robustness, higher optical clarity, controlled release, and increased bioavailability. There have been major advances in the design, assembly, and application of plant-based edible nanoparticles within the food industry over the past decade or so. As a result, there are now a wide range of different options available for creating delivery systems for specific applications. In the future, it will be important to establish whether these formulations can be produced using economically viable methods and provide the desired functionality in real-life applications.

Whey Protein Peptides Have Dual Functions: Bioactivity and Emulsifiers in Oil-In-Water Nanoemulsion

Whey protein isolate (WPI)-derived bioactive peptide fractions (1−3, 3−5, 5−10, 1−10, and >10 kDa) were for the first time used as emulsifiers in nanoemulsions. The formation and storage stability of WPI bioactive peptide-stabilized nanoemulsions depended on the peptide size, enzyme type, peptide concentration, and storage temperature. The highly bioactive <10 kDa fractions were either poorly surface-active or weak stabilizers in nanoemulsions. The moderately bioactive >10 kDa fractions formed stable nanoemulsions (diameter = 174−196 nm); however, their performance was dependent on the peptide concentration (1−4%) and enzyme type. Overall, nanoemulsions exhibited better storage stability (less droplet growth and creaming) when stored at lower (4 °C) than at higher (25 °C) temperatures. This study has shown that by optimizing peptide size using ultrafiltration, enzyme type and emulsification conditions (emulsifier concentration and storage conditions), stable nanoemulsions can be produced using WPI-derived bioactive peptides, demonstrating the dual-functionality of WPI peptides.

Saponins as Natural Emulsifiers for Nanoemulsions

The awareness of sustainability approaches has focused attention on replacing synthetic emulsifiers with natural alternatives when formulating nanoemulsions. In this context, a comprehensive review of the different types of saponins being successfully used to form and stabilize nanoemulsions is presented, highlighting the most common natural sources and biosynthetic routes. Processes for their extraction and purification are also reviewed altogether with the recent advances for their characterization. Concerning the preparation of the nanoemulsions containing saponins, the focus has been initially given to screening methods, lipid phase used, and production procedures, but their characterization and delivery systems explored are also discussed. Most experimental outcomes showed that the saponins present high performance, but the challenges associated with the saponins' broader application, mainly the standardization for industrial use, are identified. Future perspectives report, among others, the emerging biotechnological processes and the use of byproducts in a circular economy context.

Recent Innovations in Emulsion Science and Technology for Food Applications

Emulsion technology has been used for decades in the food industry to create a diverse range of products, including homogenized milk, creams, dips, dressings, sauces, desserts, and toppings. Recently, however, there have been important advances in emulsion science that are leading to new approaches to improving food quality and functionality. This article provides an overview of a number of these advanced emulsion technologies, including Pickering emulsions, high internal phase emulsions (HIPEs), nanoemulsions, and multiple emulsions. Pickering emulsions are stabilized by particle-based emulsifiers, which may be synthetic or natural, rather than conventional molecular emulsifiers. HIPEs are emulsions where the concentration of the disperse phase exceeds the close packing limit (usually >74%), which leads to novel textural properties and high resistance to gravitational separation. Nanoemulsions contain very small droplets (typically d < 200 nm), which leads to useful functional attributes, such as high optical clarity, resistance to gravitational separation and aggregation, rapid digestion, and high bioavailability. Multiple emulsions contain droplets that have smaller immiscible droplets inside them, which can be used for reduced-calorie, encapsulation, and delivery purposes. This new generation of advanced emulsions may lead to food and beverage products with improved quality, health, and sustainability.

Stability and bioaccessibility of curcumin emulsions stabilized by casein hydrolysates after maleic anhydride acylation and pullulan glycation

The effects of maleic anhydride (MA) acylation and pullulan glycation on casein hydrolysates (CH) and the physicochemical stability of modified or unmodified CH-stabilized emulsions were explored. Compared with casein, the solubility of CH was improved, and CH₁ (hydrolysis degree 4%) exhibited the optimal emulsifying properties. After the acylation of MA, degrees of acylation (DA) increased with increasing addition of MA. Fourier-transform infrared spectroscopy revealed that a covalent bond was formed between MA and CH₁. The results of pullulan glycation indicated that the degree of glycation decreased with increasing DA. Acylation combined with glycation effectively reduced the surface hydrophobicity of CH. Results of analysis of physicochemical stability and gastrointestinal fate of curcumin in emulsions revealed that CH modified by MA acylation and pullulan glycation played a positive role in enhancing the stability and bioaccessibility of curcumin loaded in emulsions.

Bioaccessibility of oil-soluble vitamins (A, D, E) in plant-based emulsions: impact of oil droplet size

We systematically investigated the impact of oil droplet diameter (≈0.15, 1.6, and 11 μm) on the bioaccessibility of three oil-soluble vitamins (vitamin A palmitate, vitamin D, and vitamin E acetate) encapsulated within soybean oil-in-water emulsions stabilized by quillaja saponin. Lipid digestion kinetics decreased with increasing droplet size due to the reduction in oil-water interfacial area. Vitamin bioaccessibility decreased with increasing droplet size from 0.15 to 11 μm: 87 to 39% for vitamin A; 76 to 44% for vitamin D; 77 to 21% for vitamin E. Vitamin bioaccessibility also decreased as their hydrophobicity and molecular weight increased, probably because their tendency to remain inside the oil droplets and/or be poorly solubilized by the mixed micelles increased. Hydrolysis of the esterified vitamins also occurred under gastrointestinal conditions: vitamin A palmitate (∼90%) and vitamin E acetate (∼3%). Consequently, the composition and structure of emulsion-based delivery systems should be carefully designed when creating vitamin-fortified functional food products.

Nanomedicine for Drug Delivery throughout the Alimentary Canal

The field of nanomedicine continues to grow with new technologies and formulations in development for several disease states. Much research focuses on the use of injectable nanomedicines for treatment of neoplasms; however, there are several formulations in development that use nanotechnology that can be administered enterally for noncancer indications. These nanomedicine treatments have been developed for systemic drug delivery or local drug delivery along the gastrointestinal tract. This Review gives a brief overview of the alimentary canal and highlights new research in nanomedicine in noncancer disease states delivered via enteral routes of administration. Relevant recent research is summarized on the basis of the targeted site of action or absorption, including the buccal, sublingual, stomach, small intestine, and large intestine areas of the alimentary canal. The benefits of nanodrug delivery are discussed as well as barriers and challenges for future development in the field.

Utilization of Nanotechnology to Improve the Handling, Storage and Biocompatibility of Bioactive Lipids in Food Applications

Bioactive lipids, such as fat-soluble vitamins, omega-3 fatty acids, conjugated linoleic acids, carotenoids and phytosterols play an important role in boosting human health and wellbeing. These lipophilic substances cannot be synthesized within the human body, and so people must include them in their diet. There is increasing interest in incorporating these bioactive lipids into functional foods designed to produce certain health benefits, such as anti-inflammatory, antioxidant, anticancer and cholesterol-lowering properties. However, many of these lipids have poor compatibility with food matrices and low bioavailability because of their extremely low water solubility. Moreover, they may also chemically degrade during food storage or inside the human gut because they are exposed to certain stressors, such as high temperatures, oxygen, light, moisture, pH, and digestive/metabolic enzymes, which again reduces their bioavailability. Nanotechnology is a promising technology that can be used to overcome many of these limitations. The aim of this review is to highlight different kinds of nanoscale delivery systems that have been designed to encapsulate and protect bioactive lipids, thereby facilitating their handling, stability, food matrix compatibility, and bioavailability. These systems include nanoemulsions, solid lipid nanoparticles (SLNs), nanostructured lipid carriers (NLCs), nanoliposomes, nanogels, and nano-particle stabilized Pickering emulsions.

Pomegranate seed oil nanoemulsion enriched by α-tocopherol; the effect of environmental stresses and long-term storage on its physicochemical properties and oxidation stability

In this study, pomegranate seed oil (PSO) nanoemulsions loading different amounts of α-tocopherol (0-40%) were produced. The nanoemulsions were fabricated by ultra-sonication method and the influence of thermal treatment (20-90 °C), pH (2-8) and ionic strength (0-500 mM NaCl) were investigated on physicochemical properties of all treatments. Moreover, the oxidative stability and α-tocopherol degradation were also assessed on optimal enriched nanoemulsion formulation during 50-day storage. The droplet diameter, viscosity, antioxidant activity, encapsulation efficiency and loading capacity of optimal formulation were 37.5 nm, 514 cp, 92%, 3.45% and 92.5%, respectively. The peroxide value changed in the range of 4.5-5.3 and 6.7-10.5 meq O₂/kg in loaded and unloaded nanoemulsions, respectively. Transmission electron microscopy demonstrated spherical morphology of nanoemulsion droplets with diameter average of 40 nm. This study suggested that PSO nanoemulsion loading α-tocopherol could be introduced as delivery system with favorable features under severe environmental conditions.

1H Nuclear Magnetic Resonance and Liquid Chromatography Coupled with Mass Spectrometry-Based Metabolomics Reveal Enhancement of Growth-Promoting Metabolites in Onion Seedlings Treated with Green-Synthesized Nanomaterials

Seed priming is a promising approach to improve germination, emergence, and seedling growth by triggering pre-germinative metabolism and enhancing seedling vigor. Recently, nanopriming gained importance in seed improvement as a result of the small size and unique physicochemical characteristics of nanomaterials. In the present study, silver and gold nanoparticles were synthesized using onion extracts as the reducing agent. Similarly, the agro-food industrial byproducts citrus seed oil and curcumin-removed turmeric oleoresin were used for the preparation of nanoemulsions. For seed priming, these green-synthesized nanomaterials were incubated with seeds of two onion (Allium cepa L.) cultivars (Legend and 50147) for 72 h, and then the plants were grown in a greenhouse for 3 weeks. Seed priming with these nanomaterials increased seed germination and seedling emergence. One-dimensional ¹H nuclear magnetic resonance and liquid chromatography coupled with mass spectrometry metabolomics studies showed that different nanopriming treatments distinctly altered the metabolome of onion seedlings. Seed priming treatments significantly inhibited plant hormones and growth regulators, such as abscisic acid and cis-(+)-12-oxo-phytodienoic acid, and enhanced germination stimulators, such as γ-aminobutyric acid and zeatin, in onion seeds and seedlings. Therefore, these priming treatments have positive impact on improving seed performance and plant growth.

Potential of Nanonutraceuticals in Increasing Immunity

Nutraceuticals are defined as foods or their extracts that have a demonstrably positive effect on human health. According to the decision of the European Food Safety Authority, this positive effect, the so-called health claim, must be clearly demonstrated best by performed tests. Nutraceuticals include dietary supplements and functional foods. These special foods thus affect human health and can positively affect the immune system and strengthen it even in these turbulent times, when the human population is exposed to the COVID-19 pandemic. Many of these special foods are supplemented with nanoparticles of active substances or processed into nanoformulations. The benefits of nanoparticles in this case include enhanced bioavailability, controlled release, and increased stability. Lipid-based delivery systems and the encapsulation of nutraceuticals are mainly used for the enrichment of food products with these health-promoting compounds. This contribution summarizes the current state of the research and development of effective nanonutraceuticals influencing the body's immune responses, such as vitamins (C, D, E, B12, folic acid), minerals (Zn, Fe, Se), antioxidants (carotenoids, coenzyme Q10, polyphenols, curcumin), omega-3 fatty acids, and probiotics.

Chitosan reduces vitamin D bioaccessibility in food emulsions by binding to mixed micelles

Consumption of sufficiently high quantities of dietary fibers has been linked to a range of health benefits. Recent research, however, has shown that some dietary fibers interfere with lipid digestion, which may reduce the bioavailability of oil-soluble vitamins and nutraceuticals. For this reason, we examined the impact of a cationic polysaccharide (chitosan) on the bioaccessibility of vitamin D using the standardized INFOGEST in vitro digestion model. The vitamin D was encapsulated within an emulsion-based delivery system that contained whey protein-coated corn oil droplets. Our results showed that chitosan promoted severe droplet flocculation in the small intestine and reduced the amount of free fatty acids detected using a pH-stat method. However, a back-titration of the digested sample showed that the lipids were fully digested at all chitosan levels used (0.1-0.5%), suggesting that chitosan may have bound some of the free fatty acids released during lipid digestion. The presence of the chitosan decreased the bioaccessibility of vitamin D by about 37%, but this effect did not depend strongly on chitosan concentration (0.1-0.5%). It was hypothesized that chitosan bound to the vitamin-loaded mixed micelles and promoted their precipitation. The knowledge gained in this study might provide useful insights in designing emulsion-based delivery systems with high vitamin bioaccessibility.

Curcumin and Quercetin-Loaded Nanoemulsions: Physicochemical Compatibility Study and Validation of a Simultaneous Quantification Method

Biphasic oil/water nanoemulsions have been proposed as delivery systems for the intranasal administration of curcumin (CUR) and quercetin (QU), due to their high drug entrapment efficiency, the possibility of simultaneous drug administration and protection of the encapsulated compounds from degradation. To better understand the physicochemical and biological performance of the selected formulation simultaneously co-encapsulating CUR and QU, a stability test of the compound mixture was firstly carried out using X-ray powder diffraction and thermal analyses, such as differential scanning calorimetry (DSC) and thermogravimetric analyses (TGA). The determination and quantification of the encapsulated active compounds were then carried out being an essential parameter for the development of innovative nanomedicines. Thus, a new HPLC-UV/Vis method for the simultaneous determination of CUR and QU in the nanoemulsions was developed and validated. The X-ray diffraction analyses demonstrated that no interaction between the mixture of active ingredients, if any, is strong enough to take place in the solid state. Moreover, the thermal analysis demonstrated that the CUR and QU are stable in the nanoemulsion production temperature range. The proposed analytical method for the simultaneous quantification of the two actives was selective and linear for both compounds in the range of 0.5-12.5 µg/mL (R² > 0.9997), precise (RSD below 3%), robust and accurate (recovery 100 ± 5 %). The method was validated in accordance with ICH Q2 R1 "Validation of Analytical Procedures" and CDER-FDA "Validation of chromatographic methods" guideline. Furthermore, the low limit of detection (LOD 0.005 µg/mL for CUR and 0.14 µg/mL for QU) and the low limit of quantification (LOQ 0.017 µg/mL for CUR and 0.48 µg/mL for QU) of the method were suitable for the application to drug release and permeation studies planned for the development of the nanoemulsions. The method was then applied for the determination of nanoemulsions CUR and QU encapsulation efficiencies (> 99%), as well as for the stability studies of the two compounds in simulated biological fluids over time. The proposed method represents, to our knowledge, the only method for the simultaneous quantification of CUR and QU in nanoemulsions.

Exploration of the Stabilization Mechanism and Curcumin Bioaccessibility of Emulsions Stabilized by Whey Protein Hydrolysates after Succinylation and Glycation in Different Orders

The combined effects of succinic anhydride (SA) succinylation and linear dextrin (LD) glycation on whey protein hydrolysates (WPH) and their stabilized emulsions were evaluated. Degree of succinylation (DS), degree of glycation (DG), and degree of browning of samples suggested that a competitive displacement of reactive groups existed when WPH reacted with SA and LD in different orders. Attenuated total reflection Fourier transform infrared (ATR-FTIR) and far-UV circular dichroism (CD) indicated that the order of modification methods had a significant effect on secondary structures of WPH. Succinylation combined with glycation effectively reduced the surface hydrophobicity and increased the molecular flexibility of WPH. Meanwhile, the total free -SH content decreased, and the exposed free -SH content increased. Results of storage stability and gastrointestinal fate of the curcumin-loaded emulsion revealed that the modified WPH with higher DS was more effective for improving the curcumin bioaccessibility, while that with higher DG was more effective for enhancing the stability of the emulsion.

Food-Grade Nanoemulsions: Preparation, Stability and Application in Encapsulation of Bioactive Compounds

Nanoemulsions have attracted significant attention in food fields and can increase the functionality of the bioactive compounds contained within them. In this paper, the preparation methods, including low-energy and high-energy methods, were first reviewed. Second, the physical and chemical destabilization mechanisms of nanoemulsions, such as gravitational separation (creaming or sedimentation), flocculation, coalescence, Ostwald ripening, lipid oxidation and so on, were reviewed. Then, the impact of different stabilizers, including emulsifiers, weighting agents, texture modifiers (thickening agents and gelling agents), ripening inhibitors, antioxidants and chelating agents, on the physicochemical stability of nanoemulsions were discussed. Finally, the applications of nanoemulsions for the delivery of functional ingredients, including bioactive lipids, essential oil, flavor compounds, vitamins, phenolic compounds and carotenoids, were summarized. This review can provide some reference for the selection of preparation methods and stabilizers that will improve performance in nanoemulsion-based products and expand their usage.

Ultrasound-assisted preparation of different nanocarriers loaded with food bioactive ingredients

Developing green and facile approaches to produce nanostructures suitable for bioactives, nanoencapsulation faces some challenges in the nutraceutical and food bioactive industries due to potential risks arising from nanomaterials fabrication and consumption. High-intensity ultrasound is an effective technology to generate different bio-based structures in sub-micron or nanometer scale. This technique owing to some intrinsic advantages such as safety, straightforward operation, energy efficiency, and scale-up potential, as well as, ability to control over size and morpHology has stood out among various nanosynthetic routes. Ultrasonically-provided energy is mainly transferred to the droplets and particles via acoustic cavitation (which is formation, growth, and implosive collapse of bubbles in solvent). This review provides an outlook on the fundamentals of ultrasonication and some applicable setups in nanoencapsulation. Different kinds of nanostructures based on surfactants, lipids, proteins and carbohydrates formed by sonication, along with their advantages and disadvantages are assessed from the viewpoint of stability, particle size, and process impacts on some functionalities. The gastrointestinal fate and safety issues of ultrasonically prepared nanostructures are also discussed. Sonication, itself or in combination with other encapsulation approaches, alongside biopolymers generate nano-engineered carriers with enough stability, small particle sizes, and a low polydispersity. The nano-sized systems improve techno-functional activities of encapsulated bioactive agents including stability, solubility, dissolution, availability, controlled and targeted release profile in vitro and in vivo plus other bioactive properties such as antioxidant and antimicrobial capacities. Ultrasonically prepared nanocarriers show a great potential in fortifying food products with desired bioactive components, especially for the industrial applications.

Vitamin E Encapsulation within Oil-in-Water Emulsions: Impact of Emulsifier Type on Physicochemical Stability and Bioaccessibility

The influence of plant-based (gum arabic and quillaja saponin) and animal-based (whey protein isolate, WPI) emulsifiers on the production and stability of vitamin E-fortified emulsions was investigated. Their impact on lipid digestibility and vitamin bioaccessibility was also studied utilizing an in vitro gastrointestinal tract. WPI and saponin produced smaller emulsions than gum arabic. All emulsions had good storage stability at room temperature (4 weeks, pH 7). Saponin- and gum arabic-emulsions were resistant to droplet aggregation from pH 2 to 8 because these emulsifiers generated strong electrosteric repulsion. WPI-coated droplets flocculated around pH 5 due to a reduction in charge near their isoelectric point. Lipid digestion was slower in saponin-emulsions, presumably because the high surface activity of saponins inhibited their removal by bile acids and lipase. Vitamin bioaccessibility was higher in WPI- than in saponin- or gum arabic-emulsions. This information may facilitate the design of more efficacious vitamin-fortified delivery systems.

Bioaccessibility and stability of β-carotene encapsulated in plant-based emulsions: impact of emulsifier type and tannic acid

The effect of two plant-based emulsifiers (quillaja saponin, QS and gum arabic, GA) and a polyphenol (tannic acid) on the formation, stability, digestibility, and β-carotene (BC) bioaccessibility of flaxseed oil-in-water emulsions was investigated.