Black Phosphorus: Narrow Gap, Wide Applications

Tunable Ultrafast Charge Transfer across Homojunction Interface

Charge transfer at heterojunction interfaces is a fundamental process that plays a crucial role in modern electronic and photonic devices. The essence of such charge transfer lies in the band offset, making charge transfer uncommon in a homojunction. Recently, sliding ferroelectricity has been proposed and confirmed in two-dimensional van der Waals stacked materials such as bilayer boron nitride. During the sliding of these layers, the band alignment shifts, creating conditions for charge separation at the interface. We employ ab initio nonadiabatic molecular dynamics simulations to elucidate the excited state carrier dynamics in bilayer boron pnictides. We propose that, akin to ferroelectric polarization flipping, the precise modulation of the distribution of excited state carriers can also be reached by sliding. Our results demonstrate that sliding induces a reversal of the frontier orbital distribution on the upper and lower layers, facilitating a robust interlayer carrier transfer. Notably, the interlayer carrier transfer is more pronounced in boron phosphide than in boron nitride, attributed to strong electron scattering in momentum space in boron nitride. We propose this novel method to manipulate carrier distribution and dynamics in a homojunction exhibiting sliding ferroelectricity, in general, paving a new way for developing advanced electronic and photonic devices.

Modifying electronic and optical properties of violet phosphorus through variable fluorine coverage

We present a comprehensive investigation of the electronic properties of fluorinated monolayer violet phosphorus using first-principles calculations. Our results reveal a strong dependence of the electronic properties on the different fluorine coverages of fluorination. As the fluorine coverage increases, monolayer violet phosphorus undergoes a significant transition from a wide direct bandgap semiconductor to a narrow indirect bandgap semiconductor. Moreover, both semi-fluorinated and fully fluorinated monolayer violet phosphorus exhibit advantageous semiconducting characteristics, with a tunable bandgap of 0.50 ~ 1.04 eV under biaxial strain ranging from -6% to 6%. Notably, the fully fluorinated monolayer violet phosphorus demonstrates a higher coefficient of light absorption within the visible range. Therefore, our findings highlight the tunability of monolayer violet phosphorus properties through the absorption of various fluorine coverages, providing valuable insights for the design and development of novel semiconductor devices based on this material.

Temperature dependent Raman spectroscopy and sensing performance of 2D black phosphorus

Temperature is an important parameter to be monitored in new wearable electronic devices. Layered black phosphorus (BP) has inherent good thermal stability and semiconductor properties and has a promising application as a temperature sensing layer. Here, we investigate the temperature sensing properties of BP, using in situ Raman spectroscopy and x-ray diffraction techniques. Flexible sensors are constructed, and temperature response is investigated in the range of 6-38 °C. The prospect application for monitoring the temperature of human body parts is demonstrated. The results show that the BP-based temperature sensors demonstrate good negative temperature coefficient characteristics and display high sensitivity and reproducible sensing performance. The temperature-dependent performance suggests the feasibility of BP as a sensitive layer in a wide temperature range. This work paves the way for exploring new applications of amazing layered materials, such as BP, in wearable electronic devices.

Mechanical reinforcement from two-dimensional nanofillers: model, bulk and hybrid polymer nanocomposites

Thanks to their intrinsic properties, multifunctionality and unique geometrical features, two-dimensional nanomaterials have been used widely as reinforcements in polymer nanocomposites. The effective mechanical reinforcement of polymers is, however, a multifaceted problem as it depends not only on the intrinsic properties of the fillers and the matrix, but also upon a number of other important parameters. These parameters include the processing method, the interfacial properties, the aspect ratio, defects, orientation, agglomeration and volume fraction of the fillers. In this review, we summarize recent advances in the mechanical reinforcement of polymer nanocomposites from two-dimensional nanofillers with an emphasis on the mechanisms of reinforcement. Model, bulk and hybrid polymer nanocomposites are reviewed comprehensively. The use of Raman and photoluminescence spectroscopies is examined in light of the distinctive information they can yield upon stress transfer at interfaces. It is shown that the very diverse family of 2D nanofillers includes a number of materials that can attribute distrinctive features to a polymeric matrix, and we focus on the mechanical properties of both graphene and some of the most important 2D materials beyond graphene, including boron nitride, molybdenum disulphide, other transition metal dichalcogenides, MXenes and black phosphorous. In the first part of the review we evaluate the mechanical properties of 2D nanoplatelets in "model" nanocomposites. Next we examine how the performance of these materials can be optimised in bulk nanocomposites. Finally, combinations of these 2D nanofillers with other 2D nanomaterials or with nanofillers of other dimensions are assessed thoroughly, as such combinations can lead to additive or even synergistic mechanical effects. Existing unsolved problems and future perspectives are discussed.

Impact of quantum size effects to the band gap of catalytic materials: a computational perspective

The evolution of nanotechnology has facilitated the development of catalytic materials with controllable composition and size, reaching the sub-nanometer limit. Nowadays, a viable strategy for tailoring and optimizing the catalytic activity involves controlling the size of the catalyst. This strategy is underpinned by the fact that the properties and reactivity of objects with dimensions on the order of nanometers can differ from those of the corresponding bulk material, due to the emergence of quantum size effects. Quantum size effects have a deep influence on the band gap of semiconducting catalytic materials. Computational studies are valuable for predicting and estimating the impact of quantum size effects. This perspective emphasizes the crucial role of modeling quantum size effects when simulating nanostructured catalytic materials. It provides a comprehensive overview of the fundamental principles governing the physics of quantum confinement in various experimentally observable nanostructures. Furthermore, this work may serve as a tutorial for modeling the electronic gap of simple nanostructures, highlighting that when working at the nanoscale, the finite dimensions of the material lead to an increase of the band gap because of the emergence of quantum confinement. This aspect is sometimes overlooked in computational chemistry studies focused on surfaces and nanostructures.

Link between T-Linear Resistivity and Quantum Criticality in Ambipolar Black Phosphorus

The interplay between strong Coulomb interactions and kinetic energy leads to intricate many-body competing ground states owing to quantum fluctuations in 2D electron and hole gases. However, the simultaneous observation of quantum critical phenomena in both electron and hole regimes remains elusive. Here, we utilize anisotropic black phosphorus (BP) to show density-driven metal-insulator transition with a critical conductance ∼e2/h which highlights the significant role of quantum fluctuations in both hole and electron regimes. We observe a T-linear resistivity from the deep metallic phase to the metal-insulator boundary at moderate temperatures, while it turns to Fermi liquid behavior in the deep metallic phase at low temperatures in both regimes. An analysis of the resistivity suggests that disorder-dominated transport leads to T-linear behavior in the hole regime, while in the electron regime, the T-linear resistivity results from strong Coulomb interactions, suggestive of strange-metal behavior. Successful scaling collapse of the resistivity in the T-linear region demonstrates the link between quantum criticality and the T-linear resistivity in both regimes. Our study provides compelling evidence that ambipolar BP could serve as an exciting testbed for investigating exotic states and quantum critical phenomena in hole and electron regimes of 2D semiconductors.

Tailoring functional two-dimensional nanohybrids: A comprehensive approach for enhancing photocatalytic remediation

Photocatalysis is gaining prominence as a viable alternative to conventional biohazard treatment technologies. Two-dimensional (2D) nanomaterials have become crucial for fabricating novel photocatalysts due to their nanosheet architectures, large surface areas, and remarkable physicochemical properties. Furthermore, a variety of applications are possible with 2D nanomaterials, either in combination with other functional nanoparticles or by utilizing their inherent properties. Henceforth, the review commences its exploration into the synthesis of these materials, delving into their inherent properties and assessing their biocompatibility. Subsequently, an overview of mechanisms involved in the photocatalytic degradation of pollutants and the processes related to antimicrobial action is presented. As an integral part of our review, we conduct a systematic analysis of existing challenges and various types of 2D nanohybrid materials tailored for applications in the photocatalytic degradation of contaminants and the inactivation of pathogens through photocatalysis. This investigation will aid to contribute to the formulation of decision-making criteria and design principles for the next generation of 2D nanohybrid materials. Additionally, it is crucial to emphasize that further research is imperative for advancing our understanding of 2D nanohybrid materials.

Prediction of highly stable 2D carbon allotropes based on azulenoid kekulene

Despite enormous interest in two-dimensional (2D) carbon allotropes, discovering stable 2D carbon structures with practically useful electronic properties presents a significant challenge. Computational modeling in this work shows that fusing azulene-derived macrocycles - azulenoid kekulenes (AK) - into graphene leads to the most stable 2D carbon allotropes reported to date, excluding graphene. Density functional theory predicts that placing the AK units in appropriate relative positions in the graphene lattice opens the 0.54 eV electronic bandgap and leads to the appearance of the remarkable 0.80 eV secondary gap between conduction bands - a feature that is rare in 2D carbon allotropes but is known to enhance light absorption and emission in 3D semiconductors. Among porous AK structures, one material stands out as a stable narrow-multigap (0.36 and 0.56 eV) semiconductor with light charge carriers (me = 0.17 m0,  mh = 0.19 m0), whereas its boron nitride analog is a wide-multigap (1.51 and 0.82 eV) semiconductor with light carriers (me = 0.39 m0,  mh = 0.32 m0). The multigap engineering strategy proposed here can be applied to other carbon nanostructures creating novel 2D materials for electronic and optoelectronic applications.

Effect of tensile deformation on the optoelectronic properties of black phosphine-doped lithium atoms

CONTEXT

First-principles calculations based on the generalized gradient approximation gradient and the Perdew-Burke-Ernzerhof function (GGA-PBE generalized function) are carried out on the intrinsic and lithium-doped black phosphine systems to investigate the effects of different uniaxial tensile deformations on the electronic and optical properties of the systems. It is shown that the structural stability of the intrinsic and lithium-doped systems decreases with increasing tensile deformation, and all systems are most stable at 0% tensile deformation. The intrinsic black phosphazene system is a direct band gap semiconductor, and its band gap increases and then decreases with tensile deformation and reaches a maximum value of 1.086 eV at 4%. Lithium doping closes the band gap of the black phosphazene system, which is metallic in nature, but the band gap is opened up when the tensile deformation is 4-6%. From the density of states analysis, the density of states of all systems is basically contributed by the s and p orbitals, with little contribution from the d orbitals, and the contribution from the p orbitals is dominant. From the analysis of optical properties, the increase of tensile deformation causes the absorption peaks of the intrinsic system to redshift then blueshift then redshift, causes the absorption peaks of the lithium-doped system to redshift, and causes the reflection peaks of all systems to redshift. In addition, lithium doping blueshifts the absorption and reflection peaks of the systems compared to the intrinsic black phosphazene system.

METHODS

Using the CASTEP section of the Materials Studio software, first-principle calculations based on density functional theory are done on the top-site doped lithium atoms of monolayer black phosphine under uniaxial stretching deformation in the a-direction, and the generalized gradient approximation gradients and Perdew-Burke-Ernzerhof functions (GGA-PBE generalized functionals) are used for the optimization and approximation process. The optimization parameters are set for the supercell structure: its plane-wave truncation energy is set to 400 eV, its Brillouin zone K-point grid is set to 3*3*3, its self-consistent field iteration accuracy convergence value is 2.0e-6 eV/atom, the convergence basis of its structural optimization is 0.02 eV/ Å, and the convergence of the stress value is 0.05 gpa. During the optimization period, the interaction force between atoms is 0.03 eV/ Å and the atomic displacement is less than 0.001 Å. To eliminate the effect of interlayer forces, a vacuum layer with a thickness of 15 Å is placed in its vertical direction (i.e., c-axis direction).

Precise synthesis of graphene by chemical vapor deposition

Graphene, a typical representative of the family of two-dimensional (2D) materials, possesses a series of phenomenal physical properties. To date, numerous inspiring discoveries have been made on its structures, properties, characterization, synthesis, transfer and applications. The real practical applications of this magic material indeed require large-scale synthesis and precise control over its structures, such as size, crystallinity, layer number, stacking order, edge type and contamination levels. Nonetheless, studies on the precise synthesis of graphene are far from satisfactory currently. Our review aims to deal with the precise synthesis of four critical graphene structures, including single-crystal graphene (SCG), AB-stacked bilayer graphene (AB-BLG), etched graphene and clean graphene. Meanwhile, existing problems and future directions in the precise synthesis of graphene are also briefly discussed.

Broadening spectral responses and achieving environmental stability in SnS2/Ag-NPs/HfO2 flexible phototransistors

Layered two-dimensional (2D) materials have gained popularity thanks to their atomically thin physique and strong coupling with light. Here, we investigated a wide band gap (≥ 2 eV) 2D material, i.e., tin disulfide (SnS2), and decorated it with silver nanoparticles, Ag-NPs, for broadband photodetection. Our results show that the SnS2/Ag-NPs devices exhibit broadband photodetection ranging from the ultraviolet to near-infrared (250-1050 nm) spectrum with decreased rise/decay times from 8/20 s to 7/16 s under 250 nm wavelength light compared to the bare SnS2 device. This is attributed to the localized surface plasmon resonance effect and the wide band gap of SnS2 crystal. Furthermore, the HfO2-passivated SnS2/Ag-NPs devices exhibited high photodetection performance in terms of photoresponsivity (∼12 500 A W-1), and external quantum efficiency (∼6 × 106%), which are significantly higher compared to those of bare SnS2. Importantly, after HfO2 passivation, the SnS2/Ag-NPs photodetector maintained the stable performance for several weeks with merely ∼5.7% reduction in photoresponsivity. Lastly, we fabricated a flexible SnS2/Ag-NPs photodetector, which shows excellent and stable performance under various bending curvatures (0, 20, and 10 mm), as it retains ∼80% of its photoresponsivity up to 500 bending cycles. Thus, our study provides a simple route to realize broadband and stable photoactivity in flexible 2D material-based devices.

Ultrathin 2D As2Se3 Nanosheets for Photothermal-Triggered Cancer Immunotherapy

Arsenic trioxide (As2O3) has achieved groundbreaking success in the treatment of acute promyelocytic leukemia (APL). However, its toxic side effects seriously limit its therapeutic application in the treatment of solid tumors. To detoxify the severe side effects of arsenic, herein we synthesized innovative 2D ultrathin As2Se3 nanosheets (As2Se3 NSs) with synergistic photothermal-triggered immunotherapy effects. As2Se3 NSs are biocompatible and biodegradable under physiological conditions and can release As(III) and Se(0). Furthermore, selenium increases the immunomodulatory efficacy of arsenic treatments, facilitating reprogramming of the tumor microenvironment by As2Se3 NSs by enhancing the infiltration of natural killer cells and effector tumor-specific CD8+ T cells. The synergistic combination of photothermal therapy and immunotherapy driven by As2Se3 NSs via a simple but effective all-in-one strategy achieved efficient anticancer effects, addressing the key limitations of As2O3 for solid tumor treatment. This work demonstrates not only the great potential of selenium for detoxifying arsenic but also the application of 2D As2Se3 nanosheets for cancer therapy.

Overall Spontaneous Water Splitting for Calcium Bismuthate Ca(BiO2)2: Flexible-Electronic-Controlled Band Edge Position and Adsorption-Site-Modulated Bond Strength

Eco-friendly photocatalysts for water splitting, highly efficient in oxygen/hydrogen evolution reactions, hold great promise for the storage of inexhaustible solar energy and address environmental challenges. However, current common photocatalysts rarely exhibit both H2 and O2 production performances unless some regulatory measures, such as strain engineering, are implemented. Additionally, the extensive utilization of flexible electronics remains constrained by their high Young's modulus. Herein, on the basis of density functional theory calculations, we identify a novel spontaneous oxygen-producing two-dimensional Ca(BiO2)2 material, which can efficiently regulate the electronic structures of the surface active sites, optimize the reaction pathways, reduce the reaction energy barriers, and boost the overall water-splitting activity through biaxial strain modulation. In detail, an unstrained Ca(BiO2)2 monolayer not only possesses a suitable band gap value (2.02 eV) to fulfill the photocatalytic water-splitting band edge relationships but also holds favorable transport properties, excellent optical absorption across the visible light spectrum, and spontaneous oxygen production under neutral conditions. More excitingly, under application of a 7% biaxial tensile strain modulation with an ideal biaxial strength of 32.35 GPa nm, the Ca(BiO2)2 monolayer not only maintains its structural integrity but also exhibits a completely spontaneous reaction for photocatalytic hydrogen precipitation with superior optical absorption. This can primarily be attributed to the substantial reduction of the potential barrier through strain engineering as well as the weakening of bond energy resulting from changes of the adsorption site as calculated by crystal orbital Hamiltonian population analysis. This flexible stretchable electronic modulated the photocatalyst behavior and bond energy of O-Bi and O-Ca interactions, offering outstanding potential for photocatalytic water spontaneous oxygen and hydrogen evolution among all of the reported metal oxides, and is more likely to become a promising candidate for future flexible electronic devices.

Two-Dimensional Van Der Waals Thin Film and Device

In the rapidly evolving field of thin-film electronics, the emergence of large-area flexible and wearable devices has been a significant milestone. Although organic semiconductor thin films, which can be manufactured through solution processing, have been identified, their utility is often undermined by their poor stability and low carrier mobility under ambient conditions. However, inorganic nanomaterials can be solution-processed and demonstrate outstanding intrinsic properties and structural stability. In particular, a series of two-dimensional (2D) nanosheet/nanoparticle materials have been shown to form stable colloids in their respective solvents. However, the integration of these 2D nanomaterials into continuous large-area thin with precise control of layer thickness and lattice orientation still remains a significant challenge. This review paper undertakes a detailed analysis of van der Waals thin films, derived from 2D materials, in the advancement of thin-film electronics and optoelectronic devices. The superior intrinsic properties and structural stability of inorganic nanomaterials are highlighted, which can be solution-processed and underscor the importance of solution-based processing, establishing it as a cornerstone strategy for scalable electronic and optoelectronic applications. A comprehensive exploration of the challenges and opportunities associated with the utilization of 2D materials for the next generation of thin-film electronics and optoelectronic devices is presented.

HER2-targeting two-dimensional black phosphorus as a nanoplatform for chemo-photothermal therapy in breast cancer

Trastuzumab (Tmab) targeted therapy or its combination with chemotherapy is normally insufficient to elicit a comprehensive therapeutic response owing to the inherent or acquired drug resistance and systemic toxicity observed in highly invasive HER2-positive breast cancer. In this study, we propose a novel approach that integrates photothermal therapy (PTT) with targeted therapy and chemotherapy, thereby achieving additive or synergistic therapeutic outcomes. We utilize PEGylated two-dimensional black phosphorus (2D BP) as a nanoplatform and photothermal agent to load chemotherapeutic drug mitoxantrone (MTO) and conjugate with Tmab (BP-PEG-MTO-Tmab). The in vitro and in vivo experiments demonstrated that the HER2-targeting BP-PEG-MTO-Tmab complexes exhibited desirable biocompatibility, safety and enhanced cancer cell uptake efficiency, resulting in increased accumulation and prolonged retention of BP and MTO within tumors. Consequently, the complex improved photothermal and chemotherapy treatment efficacy in HER2-positive cells in vitro and a subcutaneous tumor model in vivo, while minimized harm to normal cells and showed desirable organ compatibility. Collectively, our study provides compelling evidence for the remarkable efficacy of targeted and synergistic chemo-photothermal therapy utilizing all-in-one nanoparticles as a delivery system for BP and chemotherapeutic drug in HER2-positive breast cancer.

Energy loss of charged particles in anisotropic 2D materials using the oscillator model

We apply the oscillator model to study the energy loss processes of external charged particles interacting with a 2D material characterized by an anisotropic conductivity tensor. We model the material as a monolayer of harmonic oscillators, with anisotropic electronic vibration modes. We focus on the cases of parallel and perpendicular trajectories of the external particle, and we obtain analytical expressions for the stopping power and total energy loss in terms of reduced variables. This allows us to analyze in detail the interaction and to adapt the model to the considered material using adequate values for the physical parameters involved.

High-Performance Infrared Detectors Based on Black Phosphorus/Carbon Nanotube Heterojunctions

Infrared detectors have broad application prospects in the fields of detection and communication. Using ideal materials and good device structure is crucial for achieving high-performance infrared detectors. Here, we utilized black phosphorus (BP) and single-walled carbon nanotube (SWCNT) films to construct a vertical van der Waals heterostructure, resulting in high-performance photovoltaic infrared detectors. In the device, a strong built-in electric field was formed in the heterojunction with a favored energy-band matching between the BP and the SWCNT, which caused a good photovoltaic effect. The fabricated devices exhibited a diode-like rectification behavior in the dark, which had a high rectification ratio up to a magnitude of 104 and a low ideal factor of 1.4. Under 1550 nm wavelength illumination, the 2D BP/SWCNT film photodetector demonstrated an open-circuit voltage of 0.34 V, a large external power conversion efficiency (η) of 7.5% and a high specific detectivity (D*) of 3.1 × 109 Jones. This external η was the highest among those for the photovoltaic devices fabricated with the SWCNTs or the heterostructures based on 2D materials and the obtained D* was also higher than those for most of the infrared detectors based on 2D materials or carbon materials. This work showcases the application potential of BP and SWCNTs in the detection field.

Black Phosphorus for Photonic Integrated Circuits

Black phosphorus gives several advantages and complementarities over other two-dimensional materials. It has drawn extensive interest owing to its relatively high carrier mobility, wide tunable bandgap, and in-plane anisotropy in recent years. This manuscript briefly reviews the structure and physical properties of black phosphorus and targets on black phosphorus for photonic integrated circuits. Some of the applications are discussed including photodetection, optical modulation, light emission, and polarization conversion. Corresponding recent progresses, associated challenges, and future potentials are covered.

Quantitative Analysis of Mitochondrial RNA in Living Cells with a Dual-Color Imaging System

Accurate quantification and dynamic expression profiling of mitochondrial RNA (mtRNA for short) are critical for illustrating their cellular functions. However, there lack methods for precise detection of mtRNA in situ due to the delivery restrictions and complicated cellular interferences. Herein, a dual-color imaging system featured with signal amplification and normalization capability for quantitative analysis of specific mtRNA is established. As a proof-of-concept example, an enzyme-free hairpin DNA cascade amplifier fine-tailored to specifically recognize mtRNA encoding NADH dehydrogenase subunit 6 (ND6) is employed as the signal output module and integrated into the biodegradable mitochondria-targeting black phosphorus nanosheet (BP-PEI-TPP) to monitor spatial-temporal dynamics of ND6 mtRNA. An internal reference module targeting β-actin mRNA is sent to the cytoplasm via BP-PEI for signal normalization, facilitating mtRNA quantification inside living cells with a degree of specificity and sensitivity as high as reverse transcription-quantitative polymerase chain reaction (RT-qPCR). With negligible cytotoxicity, this noninvasive "RT-qPCR mimic" can accurately indicate target mtRNA levels across different cells, providing a new strategy for precise analysis of subcellular RNAs in living systems.

Observation of optical anisotropy and a linear dichroism transition in layered silicon phosphide

The investigation of in-plane two-dimensional (2D) anisotropic materials has garnered significant attention due to their exceptional electronic, optical, and mechanical characteristics. The anisotropic optical properties and angle-dependent photodetectors based on 2D anisotropic materials have been extensively studied. However, novel in-plane anisotropic materials still need to be explored to satisfy for distinct environments and devices. Here, we report the remarkable anisotropic behavior of excitons and demonstrate a unique linear-dichroism transition of absorption between ultraviolet and visible light in layered silicon phosphide (SiP) through the analysis of polarization photoluminescence (PL) and absorbance spectra. Its high absorption linear dichroism ratio of 1.16 at 388 nm, 1.15 at 532 nm, and 1.19 at 733 nm is revealed, suggesting the brilliant non-isotropic responses. The robust periodic variation of the A₁ and A₂ Raman modes in 2D SiP materials allows for the determination of their crystal orientation. Furthermore, the presence of indirect excitons with phonon sidebands in the temperature-dependent PL spectra exhibits non-monotonic energy shifts with increasing temperature, which is attributed to an enhanced electron-phonon interaction and thermal expansion. Our findings provide valuable insights into the fundamental physical properties of layered SiP and offer guidelines for designing polarization-sensitive photodetectors and angle-dependent devices based on 2D anisotropic materials.

In-plane anisotropy of graphene by strong interlayer interactions with van der Waals epitaxially grown MoO3

van der Waals (vdW) epitaxy can be used to grow epilayers with different symmetries on graphene, thereby imparting unprecedented properties in graphene owing to formation of anisotropic superlattices and strong interlayer interactions. Here, we report in-plane anisotropy in graphene by vdW epitaxially grown molybdenum trioxide layers with an elongated superlattice. The grown molybdenum trioxide layers led to high p-doping of the underlying graphene up to p = 1.94 × 1013 cm-2 regardless of the thickness of molybdenum trioxide, maintaining a high carrier mobility of 8155 cm2 V-1 s-1. Molybdenum trioxide-induced compressive strain in graphene increased up to -0.6% with increasing molybdenum trioxide thickness. The asymmetrical band distortion of molybdenum trioxide-deposited graphene at the Fermi level led to in-plane electrical anisotropy with a high conductance ratio of 1.43 owing to the strong interlayer interaction of molybdenum trioxide-graphene. Our study presents a symmetry engineering method to induce anisotropy in symmetric two-dimensional (2D) materials via the formation of asymmetric superlattices with epitaxially grown 2D layers.

Highly Sensitive and Selective DNA Sequencing Device Using Metal Adatom Adsorption on 2D Phosphorene

Two-dimensional (2D) material revolutionarily extends the technique capability of traditional nanopore/nanogap-based DNA sequencing devices. However, challenges associated with DNA sequencing on nanopores still remained in improving the sensitivity and specificity. Herein, by first-principles calculation, we theoretically studied the potential of transition-metal elements (Cr, Fe, Co, Ni, and Au) anchored on monolayer black phosphorene (BP) to act as all-electronic DNA sequencing devices. The spin-polarized band structures appeared in Cr-, Fe-, Co-, and Au-doped BP. Remarkably, the adsorption energy of nucleobases can be significantly enhanced on BP with Co, Fe, and Cr doping, which contribute to the enlarged current signal and lower noise levels. Furthermore, the order of nucleobases in terms of their adsorption energies onto the Cr@BP is C > A > G > T, which exhibits more distinct adsorption energies than Fe@BP or Co@BP. Therefore, Cr-doped BP is more effective to avoid ambiguity in recognizing various bases. We thus envisaged a possibility of a highly sensitive and selective DNA sequencing device based on phosphorene.

Structural, Electronic and Optical Properties of Some New Trilayer Van de Waals Heterostructures

Constructing two-dimensional (2D) van der Waals (vdW) heterostructures is an effective strategy for tuning and improving the characters of 2D-material-based devices. Four trilayer vdW heterostructures, BP/BP/MoS₂, BlueP/BlueP/MoS₂, BP/graphene/MoS₂ and BlueP/graphene/MoS₂, were designed and simulated using the first-principles calculation. Structural stabilities were confirmed for all these heterostructures, indicating their feasibility in fabrication. BP/BP/MoS₂ and BlueP/BlueP/MoS₂ lowered the bandgaps further, making them suitable for a greater range of applications, with respect to the bilayers BP/MoS₂ and BlueP/MoS₂, respectively. Their absorption coefficients were remarkably improved in a wide spectrum, suggesting the better performance of photodetectors working in a wide spectrum from mid-wave (short-wave) infrared to violet. In contrast, the bandgaps in BP/graphene/MoS₂ and BlueP/graphene/MoS₂ were mostly enlarged, with a specific opening of the graphene bandgap in BP/graphene/MoS₂, 0.051 eV, which is much larger than usual and beneficial for optoelectronic applications. Accompanying these bandgap increases, BP/graphene/MoS₂ and BlueP/graphene/MoS₂ exhibit absorption enhancement in the whole infrared, visible to deep ultraviolet or solar blind ultraviolet ranges, implying that these asymmetrically graphene-sandwiched heterostructures are more suitable as graphene-based 2D optoelectronic devices. The proposed 2D trilayer vdW heterostructures are prospective new optoelectronic devices, possessing higher performance than currently available devices.

Photothermal Nanomaterials: A Powerful Light-to-Heat Converter

All forms of energy follow the law of conservation of energy, by which they can be neither created nor destroyed. Light-to-heat conversion as a traditional yet constantly evolving means of converting light into thermal energy has been of enduring appeal to researchers and the public. With the continuous development of advanced nanotechnologies, a variety of photothermal nanomaterials have been endowed with excellent light harvesting and photothermal conversion capabilities for exploring fascinating and prospective applications. Herein we review the latest progresses on photothermal nanomaterials, with a focus on their underlying mechanisms as powerful light-to-heat converters. We present an extensive catalogue of nanostructured photothermal materials, including metallic/semiconductor structures, carbon materials, organic polymers, and two-dimensional materials. The proper material selection and rational structural design for improving the photothermal performance are then discussed. We also provide a representative overview of the latest techniques for probing photothermally generated heat at the nanoscale. We finally review the recent significant developments of photothermal applications and give a brief outlook on the current challenges and future directions of photothermal nanomaterials.

Two-Dimensional Violet Phosphorus P11: A Large Band Gap Phosphorus Allotrope

The discovery of novel large band gap two-dimensional (2D) materials with good stability and high carrier mobility will innovate the next generation of electronics and optoelectronics. A new allotrope of 2D violet phosphorus P₁₁ was synthesized via a salt flux method in the presence of bismuth. Millimeter-sized crystals of violet-P₁₁ were collected after removing the salt flux with DI water. From single-crystal X-ray diffraction, the crystal structure of violet-P₁₁ was determined to be in the monoclinic space group C2/c (no. 15) with unit cell parameters of a = 9.166(6) Å, b = 9.121(6) Å, c = 21.803(14)Å, β = 97.638(17)°, and a unit cell volume of 1807(2) ų. The structure differences between violet-P₁₁, violet-P₂₁, and fibrous-P₂₁ are discussed. The violet-P₁₁ crystals can be mechanically exfoliated down to a few layers (∼6 nm). Photoluminescence and Raman measurements reveal the thickness-dependent nature of violet-P₁₁, and exfoliated violet-P₁₁ flakes were stable in ambient air for at least 1 h, exhibiting moderate ambient stability. The bulk violet-P₁₁ crystals exhibit excellent stability, being stable in ambient air for many days. The optical band gap of violet-P₁₁ bulk crystals is 2.0(1) eV measured by UV-Vis and electron energy-loss spectroscopy measurements, in agreement with density functional theory calculations which predict that violet-P₁₁ is a direct band gap semiconductor with band gaps of 1.8 and 1.9 eV for bulk and monolayer, respectively, and with a high carrier mobility. This band gap is the largest among the known single-element 2D layered bulk crystals and thus attractive for various optoelectronic devices.

Growth of single-crystal black phosphorus and its alloy films through sustained feedstock release

Black phosphorus (BP), a fascinating semiconductor with high mobility and a tunable direct bandgap, has emerged as a candidate beyond traditional silicon-based devices for next-generation electronics and optoelectronics. The ability to grow large-scale, high-quality BP films is a prerequisite for scalable integrated applications but has thus far remained a challenge due to unmanageable nucleation events. Here we develop a sustained feedstock release strategy to achieve subcentimetre-size single-crystal BP films by facilitating the lateral growth mode under a low nucleation rate. The as-grown single-crystal BP films exhibit high crystal quality, which brings excellent field-effect electrical properties and observation of pronounced Shubnikov-de Haas oscillations, with high mobilities up to ~6,500 cm² V^-1 s^-1 at low temperatures. We further extend this approach to the growth of single-crystal BP alloy films, which broaden the infrared emission regime of BP from 3.7 μm to 6.9 μm at room temperature. This work will greatly facilitate the development of high-performance electronics and optoelectronics based on BP family materials.

Controllable Synthesis of 2D Materials by Electrochemical Exfoliation for Energy Storage and Conversion Application

2D materials have captured much recent research interest in a broad range of areas, including electronics, biology, sensors, energy storage, and others. In particular, preparing 2D nanosheets with high quality and high yield is crucial for the important applications in energy storage and conversion. Compared with other prevailing synthetic strategies, the electrochemical exfoliation of layered starting materials is regarded as one of the most promising and convenient methods for the large-scale production of uniform 2D nanosheets. Here, recent developments in electrochemical delamination are reviewed, including protocols, categories, principles, and operating conditions. State-of-the-art methods for obtaining 2D materials with small numbers of layers-including graphene, black phosphorene, transition metal dichalcogenides and MXene-are also summarized and discussed in detail. The applications of electrochemically exfoliated 2D materials in energy storage and conversion are systematically reviewed. Drawing upon current progress, perspectives on emerging trends, existing challenges, and future research directions of electrochemical delamination are also offered.

Wafer-Scale Production of Two-Dimensional Tin Monoselenide: Expandable Synthetic Platform for van der Waals Semiconductor-Based Broadband Photodetectors

A synthetic platform for industrially applicable two-dimensional (2D) semiconductors that addresses the paramount issues associated with large-scale production, wide-range photosensitive materials, and oxidative stability has not yet been developed. In this study, we attained the 6 in. scale production of 2D SnSe semiconductors with spatial homogeneity using a rational synthetic platform based on the thermal decomposition of solution-processed single-source precursors. The long-range structural and chemical homogeneities of the 2D SnSe layers are manifested using comprehensive spectroscopic analyses. Furthermore, the capability of the SnSe-based photodetectors for broadband photodetection is distinctly verified. The photoresponsivity and detectivity of the SnSe-based photodetectors are 5.89 A W-1 and 1.8 × 1011 Jones at 532 nm, 1.2 A W-1 and 3.7 × 1010 Jones at 1064 nm, and 0.14 A W-1 and 4.3 × 109 Jones at 1550 nm, respectively. The minimum rise times for the 532 and 1064 nm lasers are 62 and 374 μs, respectively. The photoelectrical analysis of the 5 × 5 SnSe-based photodetector array reveals 100% active devices with 95.06% photocurrent uniformity. We unequivocally validated that the air and thermal stabilities of the photocurrent yielded from the SnSe-based photodetector are determined to be >30 d in air and 160 °C, respectively, which are suitable for optoelectronic applications.

Black Phosphorous Aptamer-based Platform for Biomarker Detection

Black phosphorus nanostructures (nano-BPs) mainly include BP nanosheets (BP NSs), BP quantum dots (BPQDs), and other nano-BPs-based particles at nanoscale. Firstly discovered in 2014, nano-BPs are one of the most popular nanomaterials. Different synthesis methods are discussed in short to understand the basic concepts and developments in synthesis. Exfoliated nano-BPs, i.e. nano-BPs possess high surface area, high photothermal conversion efficacy, excellent biocompatibility, high charge carrier mobility (~1000 cm^-2V^-1s^-1), thermal conductivity of 86 Wm^-1K^-1; and these properties make it a highly potential candidate for fabrication of biosensing platform. These properties enable nano-BPs to be promising photothermal/drug delivery agents as well as in electrochemical data storage devices and sensing devices; and in super capacitors, photodetectors, photovoltaics and solar cells, LEDs, super-conductors, etc. Early diagnosis is very critical in the health sector scenarios. This review attempts to highlight the attempts made towards attaining stable BP, BP-aptamer conjugates for successful biosensing applications. BP-aptamer- based platforms are reviewed to highlight the significance of BP in detecting biological and physiological markers of cardiovascular diseases and cancer; to be useful in disease diagnosis and management.

Deep ultraviolet spontaneous emission enhanced by layer dependent black phosphorus plasmonics

Although graphene has been the primary material of interest recently for spontaneous emission engineering through the Purcell effect, it features isotropic and thickness-independent optical properties. In contrast, the optical properties of black Phosphorus (BP) are in-plane anisotropic; which supports plasmonic modes and are thickness-dependent, offering an additional degree of freedom for control. Here we investigate how the anisotropy and thickness of BP affect spontaneous emission from a Hydrogenic emitter. We find that the spontaneous emission enhancement rate i.e. Purcell factor (PF) depends on emitter orientation, and PF at a particular frequency and distance can be controlled by BP thickness. At lower frequencies, PF increases with increasing thickness due to infrared (IR) plasmons, which then enhances visible and UV far-field spectra, even at energies greater than 10 eV. By leveraging the thickness and distance-dependent PF, deep UV emission can be switched between 103 nm or 122 nm wavelength from a Hydrogenic emitter. Additionally, we find that doping can significantly tune the PF near BP and this alteration depends on the thickness of the BP. Our work shows that BP is a promising platform for studying strong plasmon-induced light-matter interactions tunable by varying doping levels, emitter orientation, and thickness.

Quantum criticality of excitonic Mott metal-insulator transitions in black phosphorus

Quantum phase transition refers to the abrupt change of ground states of many-body systems driven by quantum fluctuations. It hosts various intriguing exotic states around its quantum critical points approaching zero temperature. Here we report the spectroscopic and transport evidences of quantum critical phenomena of an exciton Mott metal-insulator-transition in black phosphorus. Continuously tuning the interplay of electron-hole pairs by photo-excitation and using Fourier-transform photo-current spectroscopy as a probe, we measure a comprehensive phase diagram of electron-hole states in temperature and electron-hole pair density parameter space. We characterize an evolution from optical insulator with sharp excitonic transition to metallic electron-hole plasma phases featured by broad absorption and population inversion. We also observe strange metal behavior that resistivity is linear in temperature near the Mott transition boundaries. Our results exemplify an ideal platform to investigating strongly-correlated physics in semiconductors, such as crossover between superconductivity and superfluity of exciton condensation.

Anisotropic magneto-optical transport properties in black phosphorus induced by in-plane magnetic field

We study the Landau levels and magneto-optical properties of bulk black phosphorus (BP) subjected to an in-plane magnetic field along the armchair direction based on an effectivek⋅pHamiltonian. We analytically obtain the Landau levels by the perturbation method, which agrees well with the results of numerical diagonalization. By using the Kubo formula, we find the magneto-optical transition selection rules and conductance spectra for inter-band transitions are highly anisotropic. In particular, for linearly polarized light along the armchair direction, the magneto-optical transition selection rule isΔn= 0, wherenis the Landau level index. However, for linearly polarized light along the zigzag and stacking direction, the magneto-optical transition selection rules becomeΔn= ±1. The magneto-optical conductance excited by linearly polarized light along the armchair direction is two order of magnitude larger than those excited by linearly polarized light along the zigzag and stacking direction because the inter-band coupling only exists in the armchair direction. Our results are useful to detect the band parameters of BP and design magnetically controlled optical devices based on it.

Application of 2D Materials for Adsorptive Removal of Air Pollutants

Air pollution is on the priority list of global safety issues, with the concern of fatal environmental and public health deterioration. 2D materials are potential adsorbent materials for environmental decontamination, owing to their high surface area, manageable interlayer binding, large surface-to-volume ratio, specific binding capability, and chemical, thermal, and mechanistic stability. Specifically, graphene oxide and reduced graphene oxide have been attracting attention, taking advantage of their low cost synthesis, excessive oxygen containing surface functionalities, and intrinsic aqueous dispersibility, making them desirable for the development of cost-effective, high performance air filters. Many different material designs have been proposed to expand their filtration capability, including the functionalization and integration with other metals and metal oxides, which act not only as binding agents to the target pollutants but also as antimicrobial agents. This review highlights the advantages and drawbacks of 2D materials for air filtration and summarizes the interrelationships among various strategies and the resultant filtration performance in terms of structural engineering, morphology control, and material compositions. Finally, potential future directions are suggested toward the idealized designs of 2D material based air filters.

Recent Developments in Heterogeneous Photocatalysts with Near-Infrared Response

Photocatalytic technology has been considered as an efficient protocol to drive chemical reactions in a sustainable and green way. With the assistance of semiconductor-based materials, heterogeneous photocatalysis converts solar energy directly into chemical energy that can be readily stored. It has been employed in several fields including CO2 reduction, H2O splitting, and organic synthesis. Given that near-infrared (NIR) light occupies 47% of sunlight, photocatalytic systems with a NIR response are gaining more and more attention. To enhance the solar-to-chemical conversion efficiency, precise regulation of the symmetric/asymmetric nanostructures and band structures of NIR-response photocatalysts is indispensable. Under the irradiation of NIR light, the symmetric nano-morphologies (e.g., rod-like core-shell shape), asymmetric electronic structures (e.g., defect levels in band gap) and asymmetric heterojunctions (e.g., PN junctions, semiconductor-metal or semiconductor-dye composites) of designed photocatalytic systems play key roles in promoting the light absorption, the separation of electron/hole pairs, the transport of charge carriers to the surface, or the rate of surface photocatalytic reactions. This review will comprehensively analyze the four main synthesis protocols for the fabrication of NIR-response photocatalysts with improved reaction performance. The design methods involve bandgap engineering for the direct utilization of NIR photoenergy, the up-conversion of NIR light into ultraviolet/visible light, and the photothermal effect by converting NIR photons into local heat. Additionally, challenges and perspectives for the further development of heterogeneous photocatalysts with NIR response are also discussed based on their potential applications.

Black phosphorus nanosheets/poly(allylamine hydrochloride) based electrochemical immunosensor for the selective detection of human epididymis protein 4

In this work, an electrochemical immunosensor based on black phosphorus nanosheets (BPNS)/poly(allylamine hydrochloride) (PAH) nanocomposite modified glassy carbon electrode was developed for the detection of ovarian cancer biomarker HE4. PAH has been applied to retain BPNS in its original honeycomb structure and to anchor biomolecules electrostatically on the transducer surface. The as synthesized nanocomposite was characterized by zeta potential analysis, scanning electron microscopy, x-ray photoelectron spectroscopy, transmission electron microscopy, high-resolution transmission electron microscopy. Subsequently, the performance of the electrochemical immunosensor was evaluated through cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy. Under the optimal condition, the developed electrochemical immunosensor permitted to detect HE4 with a linear range of 0.1-300 ng ml^-1and a detection limit of 0.01 ng ml^-1. The developed sensor exhibited good selectivity and specificity to HE4 with negligible interference effect from common biomolecules like bovine serum albumin, lysozyme, protamine, glucose, fructose, hemoglobin and fetal bovine serum. Further, practical application of developed electrochemical immunosensor was demonstrated in spiked human serum which showed satisfactory recovery percentages.

Liquid-Phase Exfoliation of Nonlayered Non-Van-Der-Waals Crystals into Nanoplatelets

For nearly 15 years, researchers have been using liquid-phase exfoliation (LPE) to produce 2D nanosheets from layered crystals. This has yielded multiple 2D materials in a solution-processable form whose utility has been demonstrated in multiple applications. It was believed that the exfoliation of such materials is enabled by the very large bonding anisotropy of layered materials where the strength of intralayer chemical bonds is very much larger than that of interlayer van der Waals bonds. However, over the last five years, a number of papers have raised questions about our understanding of exfoliation by describing the LPE of nonlayered materials. These results are extremely surprising because, as no van der Waals gap is present to provide an easily cleaved direction, the exfoliation of such compounds requires the breaking of only chemical bonds. Here the progress in this unexpected new research area is examined. The structure and properties of nanoplatelets produced by LPE of nonlayered materials are reviewed. A number of unexplained trends are found, not least the preponderance of isotropic materials that have been exfoliated to give high-aspect-ratio nanoplatelets. Finally, the applications potential of this new class of 2D materials are considered.

All-van-der-Waals Barrier-Free Contacts for High-Mobility Transistors

Ultrathin 2D semiconductor devices are considered to have beyond-silicon potential but are severely troubled by the high Schottky barriers of the metal-semiconductor contacts, especially for p-type semiconductors. Due to the severe Fermi-level pinning effect and the lack of conventional semimetals with high work functions, their Schottky hole barriers are hardly removed. Here, an all-van-der-Waals barrier-free hole contact between p-type tellurene semiconductor and layered 1T'-WS₂ semimetal is reported, which achieves a zero Schottky barrier height of 3 ± 9 meV and a high field-effect mobility of ≈1304 cm² V^-1 s^-1 . The formation of such contacts can be attributed to the higher work function of ≈4.95 eV of the 1T'-WS₂ semimetal, which is in sharp contrast with low work function (4.1-4.7 eV) of conventional semimetals. The study defines an available strategy for eliminating the Schottky barrier of metal-semiconductor contacts, facilitating 2D-semiconductor-based electronics and optoelectronics to extend Moore's law.

Engineering van der Waals Materials for Advanced Metaphotonics

The outstanding chemical and physical properties of 2D materials, together with their atomically thin nature, make them ideal candidates for metaphotonic device integration and construction, which requires deep subwavelength light-matter interaction to achieve optical functionalities beyond conventional optical phenomena observed in naturally available materials. In addition to their intrinsic properties, the possibility to further manipulate the properties of 2D materials via chemical or physical engineering dramatically enhances their capability, evoking new science on light-matter interaction, leading to leaped performance of existing functional devices and giving birth to new metaphotonic devices that were unattainable previously. Comprehensive understanding of the intrinsic properties of 2D materials, approaches and capabilities for chemical and physical engineering methods, the resulting property modifications and novel functionalities, and applications of metaphotonic devices are provided in this review. Through reviewing the detailed progress in each aspect and the state-of-the-art achievement, insightful analyses of the outstanding challenges and future directions are elucidated in this cross-disciplinary comprehensive review with the aim to provide an overall development picture in the field of 2D material metaphotonics and promote rapid progress in this fast emerging and prosperous field.

Room-Temperature Infrared Photodetectors with Zero-Dimensional and New Two-Dimensional Materials

Infrared photodetectors have received much attention for several decades due to their broad applications in the military, science, and daily life. However, for achieving an ideal signal-to-noise ratio and a very fast response, cooling is necessary in those devices, which makes them bulky and costly. Thus, room-temperature infrared photodetectors have emerged as a hot research direction. Novel low-dimensional materials with their easy fabrication and excellent photoelectronic properties provide a possible solution for room-temperature infrared photodetectors. This review aims to summarize the preparation methods and characterization of several low-dimensional materials (PbS, PbSe and HgTe, new two-dimensional materials) with great concern and the room-temperature infrared photodetectors based on them.

Evidence of Josephson Coupling in a Few-Layer Black Phosphorus Planar Josephson Junction

Setting up strong Josephson coupling in van der Waals materials in close proximity to superconductors offers several opportunities both to inspect fundamental physics and to develop cryogenic quantum technologies. Here we show evidence of Josephson coupling in a planar few-layer black phosphorus junction. The planar geometry allows us to probe the junction behavior by means of external gates, at different carrier concentrations. Clear signatures of Josephson coupling are demonstrated by measuring supercurrent flow through the junction at milli-Kelvin temperatures. Manifestation of a Fraunhofer pattern with a transverse magnetic field is also reported, confirming the Josephson coupling. These findings represent evidence of proximity Josephson coupling in a planar junction based on a van der Waals material beyond graphene and will expedite further studies, exploiting the peculiar properties of exfoliated black phosphorus thin flakes.

Mechanism investigation for ultra-efficient photocatalytic water disinfection based on rational design of indirect Z-scheme heterojunction black phosphorus QDs/Cu2O nanoparticles

Photocatalysis has been regarded as a promising inactivation technology targeting to reduce drug-resistant bacteria contamination, but developing efficient photocatalysts with broad visible light harvesting capability is still a challenge. Here we report a MOFs-derived BPQDs/Cu₂O/N-doped hollow porous carbon (BP/CNC) with indirect Z-scheme heterojunctions (BPQDs/Cu₂O), which can inactivate 99.99999% Methicillin-resistant Staphylococcus aureus (MRSA) at a concentration of only 10 mg/L. Combining photoelectrochemical techniques and electrochemical measurements, the efficient inactivation process was attributed to the synergistic effect of enhanced light utilization and effective suppression of photogenerated carrier recombination. The mechanism of gradually damaged cell membrane for MRSA was studied by employing scanning electron microscopy (SEM), fluorescence staining and coagulase titer test to further decipher the changes in bacterial cells. We propose that reactive oxygen species (ROS) destroys the cell wall membrane and causes the leakage of cell contents, eventually leading to death. In addition, a series of in vitro and in vivo toxicity tests were conducted to evaluate the biocompatibility of the antibacterial system and its potential use in practice. This strategy of BPQDs/Cu₂O indirect heterojunction fabrication can spatially inhibit the recombination of photogenerated carriers, expands the light absorption range, providing a feasible method for disinfecting microbial contaminated water.

Enhanced voltammetric performance of sensors based on oxidized 2D layered black phosphorus

The exceptional properties of 2D layered black phosphorus (BP) make it a promising candidate for electrochemical sensing applications and, even though BP is considered unstable and tends to degrade by the presence of oxygen and moisture, its oxidation can be beneficial in some situations. In this work, we present an unequivocal demonstration that the exposition of BP-based working electrodes to normal ambient conditions can indeed be advantageous, leading to an enhancement of voltammetric sensing applications. This point was proved using a BP modified screen-printed carbon electrode (BP-SPCE) for the voltammetric determination of dopamine (DA) as a model target analyte. Oxidized BP-SPCE (up to 35% of P_xO_y at the surface) presented an enhanced analytical performance with a 5-fold and 2-fold increase in sensitivity, as compared to bare-SPCE and non-oxidized BP-SPCE stored in anhydrous atmosphere, respectively. Good detection limit, repeatability, reproducibility, stability, selectivity, and accuracy were also achieved. Overall, the results presented herein display the prominent possibilities of preparing and working with BP based-sensors in normal ambient settings and showcase their implementation under physiological conditions.

Engineering sensitivity and spectral range of photodetection in van der Waals materials and hybrids

Exploration of van der Waals heterostructures in the field of optoelectronics has produced photodetectors with very high bandwidth as well as ultra-high sensitivity. Appropriate engineering of these heterostructures allows us to exploit multiple light-to-electricity conversion mechanisms, ranging from photovoltaic, photoconductive to photogating processes. These mechanisms manifest in different sensitivity and speed of photoresponse. In addition, integrating graphene-based hybrid structures with photonic platforms provides a high gain-bandwidth product, with bandwidths ≫1 GHz. In this review, we discuss the progression in the field of photodetection in 2D hybrids. We emphasize the physical mechanisms at play in diverse architectures and discuss the origin of enhanced photoresponse in hybrids. Recent developments in 2D photodetectors based on room temperature detection, photon-counting ability, integration with Si and other pressing issues, that need to be addressed for these materials to be integrated with industrial standards have been discussed.

Dual-directional group delays during optical topological transitions in black phosphorus-based asymmetric hyperbolic metamaterials

We theoretically study the optical properties of TM waves when their magnetic field direction is perpendicular to the armchair and zigzag optical axes of black phosphorus, respectively. It is found that hyperbolic dispersion and elliptic dispersion coexist in periodically arranged black phosphorus multilayers. Interestingly, by tilting the symmetric multilayers to be asymmetric, the elliptical part of the original two dispersions disappears as the wavelength increases. As such only the hyperbolic dispersion remains, showing an optical topological transition. In the region of the topological transition, a large transmitted group delay (3ps) and a reflected group delay (0.2ps) of the TM waves occurs simultaneously. The corresponding group velocities are slowed down to approximately c/1000 and c/100 (c is the speed of light in a vacuum), respectively. This dual-directional group delays significantly increase the wave-matter interaction so that nonreciprocal perfect absorptions can be realized in the mid-infrared band. Such asymmetrical black phosphorus hyperbolic metamaterials can be applied to the directional, tunable, and nonreciprocal perfect absorbers and also to devices based on strong wave-matter interactions.

Strongly Anisotropic Strain-Tunability of Excitons in Exfoliated ZrSe3

The effect of uniaxial strain on the band structure of ZrSe₃ , a semiconducting material with a marked in-plane structural anisotropy, is studied. By using a modified three-point bending test apparatus, thin ZrSe₃ flakes are subjected to uniaxial strain along different crystalline orientations monitoring the effect of strain on their optical properties through micro-reflectance spectroscopy. The obtained spectra show excitonic features that blueshift upon uniaxial tension. This shift is strongly dependent on the direction along which the strain is being applied. When the flakes are strained along the b-axis, the exciton peak shifts at ≈60-95 meV %^-1 , while along the a-axis, the shift only reaches ≈0-15 meV %^-1 . Ab initio calculations are conducted to study the influence of uniaxial strain, applied along different crystal directions, on the band structure and reflectance spectra of ZrSe₃ , exhibiting a remarkable agreement with the experimental results.

Atomically Thin 2D Photocatalysts for Boosted H2 Production from the perspective of Transient Absorption Spectroscopy

Excited state photophysical processes play the most important role in deciding the efficiency of any photonic applications like solar light driven H2 evolution, which is considered to be the next...

Complexes of Li, Na, and Mg with 2D allotropies of second and third period: a theoretical study

Complexes of Li, Na, and Mg with graphene, silicene, phosphorene nanoflakes (NFs), and their 2D allotropies have been studied at dispersion corrected TPSS/def-TZVP level of theory. The energy partition analysis of the complexes revealed that for most of the complexes exchange and correlation energies represent dominant contributions to the binding with strong charge transfer from the metal atom to a NF. The exceptions are Mg complexes of graphene and phosphorene NFs where binding is due to dispersion and correlation terms. This difference is also reflected in large Mg-NF distances suggesting weak intermolecular interactions in these complexes. The calculated activation energies for metal hopping are easily achievable at room temperatures for carbon and silicon allotropies. However, they are significantly higher for phosphorus allotropies reaching almost 18 kcal/mol. Generally, activation energies for hopping increase with binding energies for graphene, silicene, and phosphorene NFs. This trend does not observe however for graphene, silicene, and phosphorene 2D allotropies.