Highly Aligned Electrospun Collagen/Polycaprolactone Surgical Sutures with Sustained Release of Growth Factors for Wound Regeneration

Antimicrobial peptide immobilization on catechol-functionalized PCL/alginate wet-spun fibers to combat surgical site infection

Surgical site infection (SSI) caused by pathogenic bacteria leads to delayed wound healing and extended hospitalization. Inappropriate uses of antibiotics have caused a surge in SSI and common antibiotics are proving to be ineffective against SSI. Antimicrobial peptides (AMPs) can be a potential solution to prevent SSI because of their broad spectrum of antimicrobial activities. In this study, naturally sourced AMPs were studied along with microfibers, fabricated by a novel wet-spinning method using sodium alginate and polycaprolactone. Afterward, fibers were functionalized by the catechol groups of dopamine immobilizing nucleophilic AMPs on the surface. Conjugation between PCL and alginate resulted in fibers with smooth surfaces improving their mechanical strength via hydrogen bonds. Having an average diameter of 220 μm, the mechanical properties of the fiber complied with USP standards for suture size 3-0. Engineered microfibers were able to hinder the growth of Proteus spp., a pathogenic bacterium for at least 60 hours whereas antibiotic ceftazidime failed. When subjected to a linear incisional wound model study, accelerated healing was observed when the wound was closed using the engineered fiber compared to Vicryl. The microfibers promoted faster re-epithelialization compared to Vicryl proving their higher wound healing capacity.

Hydrogel-Reactive-Microenvironment Powering Reconfiguration of Polymer Architectures

Reconfiguration of architected structures has great significance for achieving new topologies and functions of engineering materials. Existing reconfigurable strategies have been reported, including approaches based on heat, mechanical instability, swelling, origami/kirigami designs, and electromagnetic actuation. However, these approaches mainly involve physical interactions between the host materials and the relevant stimuli. Herein, a novel, easy-manipulated, and controllable reconfiguration strategy for polymer architectures is proposed by using a chemical reaction of host material within a hydrogel reactive microenvironment. 3D printed polycaprolactone (PCL) lattices transformed in an aqueous polyacrylamide (PAAm) hydrogel precursor solution, in which ultraviolet (UV) light triggered heterogeneous grafting polymerization between PCL and AAm. In situ microscopy shows that PCL beams go through volumetric expansion and cooperative buckling, resulting in transformation of PCL lattices into sinusoidal patterns. The transformation process can be tuned easily and patterned through the adjustment of the PCL beam diameter, unit cell width, and UV light on-off state. Controlling domain formation is achieved by using UV masks. This framework enables the design, fabrication, and programming of architected materials and inspires the development of novel 4D printing approaches.

Poly (Betulinic Acid) Nanoparticles Loaded with bFGF Improve Functional Recovery After Spinal Cord Injury

Oxidative stress (OS) is one of the crucial molecular events of secondary spinal cord injury (SCI). Basic fibroblast growth factor (bFGF) is a multipotent cell growth factor with an anti-oxidant effect. However, bFGF has a short half-life in vivo, which limits its therapeutic application. Biodegradable polymers with excellent biocompatibility have been recently applied in SCI. The negative aspect is that polymers cannot provide a significant therapeutic effect. Betulinic acid (BA), a natural anti-inflammatory compound, has been polymerized into poly (betulinic acid) (PBA) to serve as a drug carrier for bFGF. This study explores the therapeutic effects and underlying molecular mechanisms of PBA nanoparticles (NPs) loaded with bFGF (PBA-bFGF NPs) in SCI. Results show that PBA-bFGF NPs produce remarkable biocompatibility in vivo and in vitro. The results also demonstrate that local delivery of PBA-bFGF NPs enhances motor function recovery, inhibits OS, mitigates neuroinflammation, and alleviates neuronal apoptosis following SCI. Furthermore, the results indicate that local delivery of PBA-bFGF NPs activates the nuclear factor erythroid 2-related factor 2 (Nrf-2) signaling pathway following SCI. In summary, results suggest that local delivery of PBA-bFGF NPs delivers potential therapeutic advantages in the treatment and management of SCI.

Bioinspired, Robust, and Absorbable Cellulose Nanofibrils/Chitosan Filament with Remarkable Cytocompatibility and Wound Healing Properties

Surgical threads are of great importance to prevent wound infection and accelerate tissue healing in surgical treatment. Cellulose nanofibrils (CNF) and chitosan (CS) are attracting increasing attention to be employed as biomedicine materials due to their nontoxicity, cytocompatibility, and biodegradability. However, a robust and absorbable cellulose-based surgical thread has not been explored. Therefore, in this work, a bioinspired CNF/CS composite thread containing 5% cationic polyacrylamide (CPAM) by the mass of CS was prepared, and the obtained CNF/CS-5C thread exhibited excellent mechanical properties and low swelling ratio in water due to the high cross-link degree. Especially, the tensile strength (1877 ± 107 MPa) of this thread was much higher than that of most reported CNF-based threads. Meanwhile, compared with commercial silk and Vicryl surgical threads, the CNF/CS-5C thread exhibited better in vitro cytocompatibility toward endothelial and fibroblast cells and lower inflammatory response in vivo to subcutaneous tissues of rats. In addition, the obtained thread could be regarded as a promising absorbable suture, which exhibited excellent wound healing performances in vivo. Therefore, the prepared absorbable thread will open a new window to prepare novel and advanced cellulose-based threads for medical applications.

Electrospinning of pullulan-based orodispersible films containing sildenafil

Feasibility of electrospinning in the manufacturing of sildenafil-containing orodispersible films (ODFs) intended to enhance oxygenation and to reduce pulmonary arterial pressure in pediatric patients was evaluated. Given the targeted subjects, the simplest and safest formulation was chosen, using water as the only solvent and pullulan, a natural polymer, as the sole fiber-forming agent. A systematic characterization in terms of shear and extensional viscosity as well as surface tension of solutions containing different amounts of pullulan and sildenafil was carried out. Accordingly, electrospinning parameters enabling the continuous production, at the highest possible rate, of defect-free fibers with uniform diameter in the nanometer range were assessed. Morphology, microstructure, drug content and relevant solid state as well as ability of the resulting non-woven films to interact with aqueous fluids were evaluated. To better define the role of the fibrous nanostructure on the performance of ODFs, analogous films were produced by spin- and blade-coating and tested. Interestingly, the disintegration process of electrospun products turned out to be the fastest (i.e. occurring within few s) and compliant with Ph. Eur. and USP limits, making relevant ODFs particularly promising for increasing sildenafil bioavailability, thus lowering its dosages.

Effects of electrospun fibers containing ascorbic acid on oxidative stress reduction for cardiac tissue engineering

Tissue engineering provides promise for regeneration of cardiac tissue following myocardial infarction. However, the harsh microenvironment of the infarct hampers the efficacy of regenerative therapies. Ischemia-reperfusion injury dramatically increases the levels of reactive oxygen species (ROS) within the infarcted area, causing a cascade of further cellular injury. Implantable tissue engineered grafts can target this oxidative stress by delivering pharmaceutical compounds directly into the diseased tissue. Herein, we successfully fabricated electrospun polycaprolactone (PCL) fibers containing varying concentrations of ascorbic acid, a potent antioxidant well known for its ROS-scavenging capabilities. The antioxidant scaffolds displayed significantly improved scavenging of DPPH radicals, superoxide anions and hydroxyl radicals, in a dose dependent manner. Mechanical properties testing indicated that incorporation of ascorbic acid enhanced the strength and Young's modulus of the material, correlating with a moderate but non-significant increase in the crystallinity. Moreover, the scaffolds supported adhesion and maintained survival of human umbilical vein endothelial cells in vitro, indicating good cytocompatibility. These results provide motivation for the use of ascorbic acid-containing fibrous scaffolds to regulate the highly oxidative microenvironment following myocardial infarction.

Multi-material electrospinning: from methods to biomedical applications

Electrospinning as a versatile, simple, and cost-effective method to engineer a variety of micro or nanofibrous materials, has contributed to significant developments in the biomedical field. However, the traditional electrospinning of single material only can produce homogeneous fibrous assemblies with limited functional properties, which oftentimes fails to meet the ever-increasing requirements of biomedical applications. Thus, multi-material electrospinning referring to engineering two or more kinds of materials, has been recently developed to enable the fabrication of diversified complex fibrous structures with advanced performance for greatly promoting biomedical development. This review firstly gives an overview of multi-material electrospinning modalities, with a highlight on their features and accessibility for constructing different complex fibrous structures. A perspective of how multi-material electrospinning opens up new opportunities for specific biomedical applications, i.e., tissue engineering and drug delivery, is also offered.

Effect of UV Irradiation of Pre-Gel Solutions on the Formation of Collagen Gel Tubes

Hollow collagen gels are promising materials for drug/cell delivery systems to promote tissue regeneration because they may be able to function as carriers for these types of loads. Controlling the cavity size and swelling suppression is essential to expand the applications and improve the usability of such gel-like systems. We investigated the effects of UV-treated collagen solutions as a pre-gel aqueous mixture on the formation and properties of the hollow collagen gels in terms of their preparation range limits, morphology, and swelling ratio. The UV treatment thickened the pre-gel solutions, which allowed hollowing at lower collagen concentrations. This treatment also prevents the over-swelling of the hollow collagen rods in PBS buffer solutions. The UV-treated collagen solutions provided a large lumen space in the prepared collagen hollow fiber rods with a limited swelling ratio, allowing vascular endothelial cells and ectodermal cells to be cultured separately in the outer and inner lumen.

Collagen Derived from Fish Industry Waste: Progresses and Challenges

Fish collagen garnered significant academic and commercial focus in the last decades featuring prospective applications in a variety of health-related industries, including food, medicine, pharmaceutics, and cosmetics. Due to its distinct advantages over mammalian-based collagen, including the reduced zoonosis transmission risk, the absence of cultural-religious limitations, the cost-effectiveness of manufacturing process, and its superior bioavailability, the use of collagen derived from fish wastes (i.e., skin, scales) quickly expanded. Moreover, by-products are low cost and the need to minimize fish industry waste's environmental impact paved the way for the use of discards in the development of collagen-based products with remarkable added value. This review summarizes the recent advances in the valorization of fish industry wastes for the extraction of collagen used in several applications. Issues related to processing and characterization of collagen were presented. Moreover, an overview of the most relevant applications in food industry, nutraceutical, cosmetics, tissue engineering, and food packaging of the last three years was introduced. Lastly, the fish-collagen market and the open technological challenges to a reliable recovery and exploitation of this biopolymer were discussed.

Core-Shell Filament with Excellent Wound Healing Property Made of Cellulose Nanofibrils and Guar Gum via Interfacial Polyelectrolyte Complexation Spinning

Natural polymer-based sutures have attractive cytocompatibility and degradability in surgical operations. Herein, anionic cellulose nanofibrils (ACNF) and cationic guar gum (CGG) are employed to produce nontoxic CGG/ACNF composite filament with a unique core-shell structure via interfacial polyelectrolyte complexation (IPC) spinning. The comprehensive characterization and application performance of the resultant CGG/ACNF filament as a surgical suture are thoroughly investigated in comparison with silk and PGLA (90% glycolide and 10% l-lactide) sutures in vitro and in vivo, respectively. Results show that the CGG/ACNF filament with the typical core-shell structure and nervation pattern surface exhibits a high orientation index (0.74) and good mechanical properties. The tensile strength and knotting strength of CGG/ACNF suture prepared by twisting CGG/ACNF filaments increase by 69.5%, and CGG/ACNF suture has a similar friction coefficient to silk and PGLA sutures. Moreover, CGG/ACNF suture with antibiosis and cytocompatibility exhibits better growth promotion of cells than silk suture, similar to PGLA suture in vitro. In addition, the stitching experiment of mice with the CGG/ACNF suture further confirms better healing properties and less inflammation in vivo than silk and PGLA sutures do. Hence, the CGG/ACNF suture with a simple preparation method and excellent application properties is promising in surgical operations.

Collagen fabricated delivery systems for wound healing: A new roadmap

Collagen is a biopolymer found in the animal body. It is one of the most abundant proteins in the extracellular matrix that provides strength to the skin, joints, and bones in the human body. It is an important source of elasticity and strength in the extracellular matrix and contributes to the structural and physiological integrity of tissues. Collagen plays an important role in regulating the wound healing process. It helps in wound healing by attracting fibroblasts and encouraging new collagen formation in the wound bed. Therefore, it can be used as a supplementary aid for wound treatment to accelerate the healing process. A prominent benefit of incorporating collagen in wound dressings is its ability to enhance the healing process for critical wounds. Not only collagen but various collagen-containing systems are being prepared to boost its efficacy in wound healing. Different strategies like nanoscale reductions, biopolymers, and incorporating anti-inflammatory and antimicrobial drugs with collagen have been reported. This review article emphasizes the use of collagen for wound healing and various collagen fabricated delivery systems such as nanofibres, nanoparticles, hydrogels, films, and sponges that aid in the healing of wounds.

Bridging potential of Taurine-loading PCL conduits transplanted with hEnSCs on resected sciatic nerves

Reconstruction of nerve conduits is a promising method for functional improvement in peripheral nerve repair. Besides choosing of a suitable polymer for conduit construction, adding factors such as Taurine improve a more advantageous microenvironment for defect nerve regeneration. Showing several major biological properties of Taurine, for example, regulation of the osmotic pressure, modulation of neurogenesis, and calcium hemostasis, makes it an appropriate option for repairing of defected nerves. To this, we examined repairing effects of Taurine-loading PCL conduits cultured with human endothelial stem cells (hEnSCs) on resected sciatic nerves. PCL/Taurine/Cell conduits transplanted to a 10-mm sciatic nerve gap. Forty-two wistar rats were randomly divided to seven groups: (1) Normal group, (2) Negative control (NC), (3) Positive control (nerve Autograft group), (4) PCL conduits group (PCL), (5) Taurine loaded PCL conduits group (PCL/Taurine), (6) hEnSCs cultured on the PCL conduits (PCL/Cell), (7) hEnSCs cultured on the PCL/Taurine conduits (PCL/Taurine/Cell). Functional recovery of motor and sensory nerves, the action potential of exciting muscle and motor distal latency has seen in PCL/Taurine/Cell conduits. Histological studies showed also remarkable nerve regeneration and obvious bridging has seen in this group. In conclusion, PCL/Taurine/Cell conduits showing suitable mechanical properties and biocompatibility may improve sciatic nerve regeneration.

Development of high resilience spiral wound suture-embedded gelatin/PCL/heparin nanofiber membrane scaffolds for tendon tissue engineering

This study develops a spiral wound scaffold based on gelatin/PCL/heparin (GPH) nanofiber membranes for tendon tissue engineering. By embedding sutures in dual layers of aligned GPH nanofiber membranes, prepared from mixed electrospinning of gelatin and PCL/heparin solutions, we fabricate a high resilience scaffold intended for the high loading environment experienced by tendons. The basic fibroblast growth factor (bFGF) was anchored to GPH scaffold through bioaffinity between heparin and bFGF, aim to provide biological cues for maintenance of tenogenic phenotype. In addition, the aligned nanofiber morphology is expected to provide physical cues toward seeded tenocytes. With sustained release of bFGF, GPH-bFGF can enhance proliferation, up-regulate tenogenic gene expression, and increase synthesis of tendon-specific proteins by tenocytes in vitro. Furthermore, by properly maintaining tendon phenotypes, GPH-bFGF/tenocytes constructs showed improved mechanical properties over GPH-bFGF. From in vivo study using GPH-bFGF/tenocytes constructs to repair rabbit Achilles tendon defects, neotendon tissue formation was confirmed from histological staining and biomechanical analysis. These findings collectively demonstrate that the newly designed GPH-bFGF scaffold could provide a niche for inducing tendon tissue regeneration by effectively restoring the tendon tissue structure and function.

Amphiphilic Crosslinked Four-Armed Poly(lactic-co-glycolide) Electrospun Membranes for Enhancing Cell Adhesion

Common poly(lactide-co-glycolide) (i-PLGA) has emerged as a biodegradable and biocompatible material in tissue engineering. However, the poor hydrophilicity and elasticity of i-PLGA lead to its limited application in tissue engineering. To this end, an amphiphilic crosslinked four-armed poly(lactic-co-glycolide) was prepared. First, four-armed PLGA (4A-PLGA) was synthesized by polymerizing l-lactide (LA) and glycolide (GA) with pentaerythritol as the initiator. Then, the hydrophilic polymer poly(glutamate propylene ester) (PGPE) was prepared through the esterification of glutamic acid and 1,2-propanediol. The hydrophilic 4A-PLGA-PGPE was finally synthesized through the condensation reaction of 4A-PLGA and PGPE with the aid of triphosgene. 4A-PLGA-PGPE was then used to prepare amphiphilic membranes by electrospinning. It was demonstrated that the mechanical properties and biocompatibility of 4A-PLGA were improved after the introduction of PGPE. Furthermore, the introduction of glutamate improved the hydrophilicity of 4A-PLGA, thus effectively promoting cell entry and adhesion, which makes the electrospun 4A-PLGA-PGPE membranes promising for tissue engineering.

A review of current advancements for wound healing: Biomaterial applications and medical devices

Wound healing is a complex process that is critical in restoring the skin's barrier function. This process can be interrupted by numerous diseases resulting in chronic wounds that represent a major medical burden. Such wounds fail to follow the stages of healing and are often complicated by a pro‐inflammatory milieu attributed to increased proteinases, hypoxia, and bacterial accumulation. The comprehensive treatment of chronic wounds is still regarded as a significant unmet medical need due to the complex symptoms caused by the metabolic disorder of the wound microenvironment. As a result, several advanced medical devices, such as wound dressings, wearable wound monitors, negative pressure wound therapy devices, and surgical sutures, have been developed to correct the chronic wound environment and achieve skin tissue regeneration. Most medical devices encompass a wide range of products containing natural (e.g., chitosan, keratin, casein, collagen, hyaluronic acid, alginate, and silk fibroin) and synthetic (e.g., polyvinyl alcohol, polyethylene glycol, poly[lactic‐co‐glycolic acid], polycaprolactone, polylactic acid) polymers, as well as bioactive molecules (e.g., chemical drugs, silver, growth factors, stem cells, and plant compounds). This review addresses these medical devices with a focus on biomaterials and applications, aiming to deliver a critical theoretical reference for further research on chronic wound healing.

Electrospun hierarchical structural films for effective wound healing

Patients with acute and chronic wounds have been increasing around the world, and the demand for wound treatment and care is also increasing. Therefore, a new nanofiber wound dressing should be prepared to promote the wound healing process. In this study, we report the design and preparation of a hierarchical structural film wound dressing. The top layer is composed of profoundly hydrophobic polycaprolactone (PCL), which is used to resist the adhesion of external microorganisms. The bottom layer is made of hydrophilic gelatin, which provides a moist healing environment for the wound. The middle layer is composed of hydrophilic Janus nanofibers prepared with the latest side-by-side electrospinning technique. Gelatin and PCL are used as polymer matrices loaded with the ciprofloxacin (CIP) drug and zinc oxide nanoparticles (n-ZnO), respectively. Test results show that the dressing has outstanding surface wettability, excellent mechanical properties, and rapid drug release. The presence of biologically active ingredients provides antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Finally, the results of wound healing in mice show accelerated collagen deposition, promotion of angiogenesis, and complete wound healing within 14 days. Overall, this hierarchical structural dressing has a strong potential for accelerating wound healing.

Electrospun Medical Sutures for Wound Healing: A Review

With the increasing demand for wound healing around the world, the level of medical equipment is also increasing, but sutures are still the preferred medical equipment for medical personnel to solve wound closures. Compared with the traditional sutures, the nanofiber sutures produced by combining the preparation technology of drug-eluting sutures have greatly improved both mechanical properties and biological properties. Electrospinning technology has attracted more attention as one of the most convenient and simple methods for preparing functional nanofibers and the related sutures. This review firstly discusses the structural classification of sutures and the performance analysis affecting the manufacture and use of sutures, followed by the discussion and classification of electrospinning technology, and then summarizes the relevant research on absorbable and non-absorbable sutures. Finally, several common polymers and biologically active substances used in creating sutures are concluded, the related applications of sutures are discussed, and the future prospects of electrospinning sutures are suggested.

Recent Progress and Potential Biomedical Applications of Electrospun Nanofibers in Regeneration of Tissues and Organs

Electrospun techniques are promising and flexible technologies to fabricate ultrafine fiber/nanofiber materials from diverse materials with unique characteristics under optimum conditions. These fabricated fibers/nanofibers via electrospinning can be easily assembled into several shapes of three-dimensional (3D) structures and can be combined with other nanomaterials. Therefore, electrospun nanofibers, with their structural and functional advantages, have gained considerable attention from scientific communities as suitable candidates in biomedical fields, such as the regeneration of tissues and organs, where they can mimic the network structure of collagen fiber in its natural extracellular matrix(es). Due to these special features, electrospinning has been revolutionized as a successful technique to fabricate such nanomaterials from polymer media. Therefore, this review reports on recent progress in electrospun nanofibers and their applications in various biomedical fields, such as bone cell proliferation, nerve regeneration, and vascular tissue, and skin tissue, engineering. The functionalization of the fabricated electrospun nanofibers with different materials furnishes them with promising properties to enhance their employment in various fields of biomedical applications. Finally, we highlight the challenges and outlooks to improve and enhance the application of electrospun nanofibers in these applications.

Texturing Hierarchical Tissues by Gradient Assembling of Microengineered Platelet-Lysates Activated Fibers

The heterogeneity of hierarchical tissues requires designing multipart engineered constructs as suitable tissue replacements. Herein, the incorporation of platelet lysate (PL) within an electrospun fiber core is proposed aiming for the fabrication of functionally graded 3D scaffolds for heterotypic tissues regeneration, such as tendon-to-bone interfaces. First, anisotropic yarns (A-Yarns) and isotropic threads with nanohydroxyapatite (I-Threads/PL@nHAp) are fabricated to recreate the tendon- and bone-microstructures and both incorporated with PL using emulsion electrospinning for a sustained and local delivery of growth factors, cytokines, and chemokines. Biological performance using human adipose-derived stem cells demonstrates that A-Yarns/PL induce a higher expression of scleraxis, a tenogenic-marker, while in I-Threads/PL@nHAp, higher alkaline phosphatase activity and matrix mineralization suggest an osteogenic commitment without the need for biochemical supplementation compared to controls. As a proof-of-concept, functional 3D gradient scaffolds are fabricated using a weaving technique, resulting in 3D textured hierarchical constructs with gradients in composition and topography. Additionally, the precise delivery of bioactive cues together with in situ biophysical features guide the commitment into a phenotypic gradient exhibiting chondrogenic and osteochondrogenic profiles in the interface of scaffolds. Overall, a promising patch solution for the regeneration of tendon-to-bone tissue interface through the fabrication of PL-functional 3D gradient constructs is demonstrated.

Preliminary Characterization of a Polycaprolactone-SurgihoneyRO Electrospun Mesh for Skin Tissue Engineering

Skin is a hierarchical and multi-cellular organ exposed to the external environment with a key protective and regulatory role. Wounds caused by disease and trauma can lead to a loss of function, which can be debilitating and even cause death. Accelerating the natural skin healing process and minimizing the risk of infection is a clinical challenge. Electrospinning is a key technology in the development of wound dressings and skin substitutes as it enables extracellular matrix-mimicking fibrous structures and delivery of bioactive materials. Honey is a promising biomaterial for use in skin tissue engineering applications and has antimicrobial properties and potential tissue regenerative properties. This preliminary study investigates a solution electrospun composite nanofibrous mesh based on polycaprolactone and a medical grade honey, SurgihoneyRO. The processing conditions were optimized and assessed by scanning electron microscopy to fabricate meshes with uniform fiber diameters and minimal presence of beads. The chemistry of the composite meshes was examined using Fourier transform infrared spectroscopy and X-ray photon spectroscopy showing incorporation of honey into the polymer matrix. Meshes incorporating honey had lower mechanical properties due to lower polymer content but were more hydrophilic, resulting in an increase in swelling and an accelerated degradation profile. The biocompatibility of the meshes was assessed using human dermal fibroblasts and adipose-derived stem cells, which showed comparable or higher cell metabolic activity and viability for SurgihoneyRO-containing meshes compared to polycaprolactone only meshes. The meshes showed no antibacterial properties in a disk diffusion test due to a lack of hydrogen peroxide production and release. The developed polycaprolactone-honey nanofibrous meshes have potential for use in skin applications.

Self-Assembled Nanofibrous Marine Collagen Matrix Accelerates Healing of Full-Thickness Wounds

There is an urgent clinical need for wound dressings to treat skin injuries, particularly full-thickness wounds caused by acute and chronic wounds. Marine collagen has emerged as an attractive and safer alternative due to its biocompatibility, diversity, and sustainability. It has minimum risk of zoonotic diseases and less religious constraints as compared to mammalian collagen. In this study, we reported the development of a self-assembled nanofibrous barramundi (Lates calcarifer) collagen matrix (Nano-BCM), which showed good biocompatibility for full-thickness wound-healing applications. The collagen was extracted and purified from barramundi scales and skin. Thereafter, the physicochemical properties of collagen were systematically evaluated. The process to extract barramundi skin collagen (BC) gave an excellent 45% yield and superior purity (∼100%). More importantly, BC demonstrated structural integrity, native triple helix structure, and good thermal stability. BC demonstrated its efficacy in promoting human primary dermal fibroblast (HDF) and immortalized human keratinocytes (HaCaT) proliferation and migration. Nano-BCM has been prepared via self-assembly of collagen molecules in physiological conditions, which resembled the native extracellular matrix (ECM). The clinical therapeutic efficacy of the Nano-BCM was further evaluated in a full-thickness splinted skin wound mice model. In comparison to a clinically used wound dressing (DuoDerm), the Nano-BCM demonstrated significantly accelerated wound closure and re-epithelization. Moreover, Nano-BCM nanofibrous architecture and its ability to facilitate early inflammatory response significantly promoted angiogenesis and differentiated myofibroblast, leading to enhanced wound healing. Consequently, Nano-BCM demonstrates great potential as an economical and effective nonmammalian substitute to achieve skin regeneration.

The Effect of Drug Heterogeneous Distributions within Core-Sheath Nanostructures on Its Sustained Release Profiles

The sustained release of a water-soluble drug is always a key and important issue in pharmaceutics. In this study, using cellulose acetate (CA) as a biomacromolecular matrix, core-sheath nanofibers were developed for providing a sustained release of a model drug-metformin hydrochloride (MET). The core-sheath nanofibers were fabricated using modified tri-axial electrospinning, in which a detachable homemade spinneret was explored. A process-nanostructure-performance relationship was demonstrated through a series of characterizations. The prepared nanofibers F2 could release 95% of the loaded MET through a time period of 23.4 h and had no initial burst effect. The successful sustained release performances of MET can be attributed to the following factors: (1) the reasonable application of insoluble CA as the filament-forming carrier, which determined that the drug was released through a diffusion manner; (2) the core-sheath nanostructure provided the possibility of both encapsulating the drug completely and realizing the heterogeneous distributions of MET in the nanofibers with a higher drug load core than the sheath; (3) the thickness of the sheath sections were able to be exploited for further manipulating a better drug extended release performance. The mechanisms for manipulating the drug sustained release behaviors are proposed. The present proof-of-concept protocols can pave a new way to develop many novel biomolecule-based nanostructures for extending the release of water-soluble drugs.

Preparation of aligned nanofibers using parallel inductive-plates assisted electrospinning

Electrospinning is a simple, cost-effective, and versatile technique for fabrication of nanofibers. However, nanofibers obtained from the conventional electrospinning are typically disordered, which seriously limits their application. In this work, we present a novel and facile technique to obtain aligned nanofibers with high efficiency by using parallel inductive-plates assisted electrospinning (PIES). In this new electrospinning setup, the electrostatic spinneret is contained in a pair of parallel inductive-plates, which can change the shape and direction of the electric field line during the electrospinning so as to control the flight trajectory and spatial alignment of the spinning nanofibers. This electrospinning setup can divide the electric field line into two parts which are respectively directed to the edge of the upper and lower inductive-plates. Then the nanofibers move along the electric field line, suspend and align between the parallel inductive-plates. Finally, the well aligned nanofibers could be easily transferred onto other substrates for further characterizations and applications. The aligned nanofibers with an average diameter of 469 ± 115 nm and a length as long as 140 mm were successfully achieved by using PIES technique. Moreover, nanofiber arrays with different cross angles and three-dimensional films formed by the aligned nanofibers were also facilely obtained. The novel PIES developed in this work has been proved to be a facile, cost-effective and promising approach to prepare aligned nanofibers for a wide range of applications.

Poly(ε-caprolactone) grafted cashew gum nanoparticles as an epirubicin delivery system

Polysaccharide based copolymers have been the focus of several research, particularly for the development of drug delivery systems. This study reports on the preparation of nanoparticles from an amphiphilic copolymer obtained by the poly(ε-caprolactone) graft in the structure of cashew gum, via ring-opening polymerization. The synthesis of copolymers was confirmed by Fourier transform infrared spectroscopy and nuclear magnetic resonance. The copolymers exhibit self-organization capability in water, with critical association concentration of 42 and 50 μg mL^-1. The nanoparticle hydrodynamic diameters (212 and 202 nm) revealed a decreasing trend with increasing poly(ε-caprolactone) graft percentage. Epirubicin was used as an anticancer drug model and incorporated into the nanoparticles. The encapsulation efficiency reached 50% and 5.0% drug load. Nanoparticles showed an epirubicin controlled release profile, with maximum release of 93.0 ± 4.0% in 72 h, as well as excellent biocompatibility, according to hemolysis and cytotoxicity assays.

Copper-Eluting Fibers for Enhanced Tissue Sealing and Repair

Copper ions play an important role in several physiological processes, including angiogenesis, growth factor induction and extracellular matrix remodeling, that modulate wound healing and tissue repair. In this work, copper-loaded alginate fibers were generated and used as surgical sutures for repair of incisional wounds in live mice. Approximately 95% of initially loaded copper ions were released from the sutures within the first 24 h following an initial burst release. This localized delivery of copper at the incision site resulted in significantly higher recovery in tissue biomechanical strengths compared to conventional nylon and calcium alginate sutures at early times following surgery. Irradiation of copper alginate sutures with near-infrared light resulted in a robust photothermal response and led to efficacies similar to those seen with nonirradiated sutures. Histopathology and immunohistological analyses indicated significantly reduced epithelial gap and higher number of CD31+ cells, which is indicative of increased angiogenesis around the incision site. Delivery of copper ions did not result in toxicity under the conditions employed. Our findings demonstrate that delivery of ionic copper from sutures resulted in efficacious approximation and healing of incisional wounds, and copper-eluting fibers may have translational potential for accelerating repair in surgical and trauma wounds.