High Catalytic Activity of Fluorophore-Labeled Y-Shaped DNAzyme/3D MOF-MoS2NBs as a Versatile Biosensing Platform for the Simultaneous Detection of Hg2+, Ni2+, and Ag+ Ions

Highly Porous 3D Ni-MOFs as an Efficient and Enzyme-Mimic Electrochemical Sensing Platform for Glucose in Real Samples of Sweat and Saliva in Biomedical Applications

Nickel-based metal-organic frameworks, denoted as three-dimensional nickel trimesic acid frameworks (3D Ni-TMAF), are gaining significant attention for their application in nonenzymatic glucose sensing due to their unique properties. Ni-MOFs possess a high surface area, tunable pore structures, and excellent electrochemical activity, which makes them ideal for facilitating electron transfer and enhancing the catalytic oxidation of glucose. This research describes a new electrochemical enzyme-mimic glucose biosensor in biological solutions that utilizes 3D nanospheres Ni-TMAF created layer-by-layer on a highly porous nickel substrate. The Ni-TMAF based on the nonenzymatic electrochemical glucose oxidation represent the promising approach, leveraging the unique properties of Ni-TMAF to provide efficient, stable, and potentially more cost-effective alternatives to traditional enzyme-mimic sensors. The MOF is synthesized from trimesic acid (TMA) and nickel nitrate hexahydrate through a solvothermal reaction process. The resulting Ni-TMAF utilizes the three-dimensional nanospheres of crystalline porous structure with a large surface area and numerous active sites for catalytic reaction toward glucose. Ni-TMAF are indeed known for their excellent electrocatalytic activity, particularly in the context of glucose oxidation under alkaline conditions. The nickel centers in the Ni-TMAF facilitate efficient electron transfer and redox reactions, leading to the high sensitivity of 203.89 μA μM-1 cm-2 and lower LOD of 0.33 μM and fast response time of <3 s in glucose sensors. Their stability, cost-effectiveness, and high performance make 3D Ni-TMAF a promising material for nonenzymatic electrochemical glucose sensors.

Recent Advancements in Sensing of Silver ions by Different Host Molecules: An Overview (2018-2023)

The chemosensors act as powerful tool in the detection of metal ions due to their simplicity, high sensitivity, low cost, low detection limit, rapid photophysical response, and application to the environmental and medical fields. This review article presents an overview for the chemosensing of Ag+ ions based on Calix, MOF, Nanoparticle, COF, Calix, Electrochemical chemosensor published from 2018 to 2023. Here, we have reviewed the sensing of Ag+ ions and summarised the binding response, mechanism, LOD, colorimetric response, adsorption capacity, technique used. The purpose of this review article to provide a detailed summary of the performance of different host chemosensors that are helpful for providing future direction to researchers on Ag+ ion detection and provides path to design effective chemsosensor (simple to synthesize, cost effective, high sensitivity, with more practical application). While studying the related article literature, we came across some challenges and that has been discussed lastly and provided solutions for them.

A dual-functional rhodamine B and azo-salicylaldehyde derivative for the simultaneous detection of copper and hypochlorite: synthesis, biological applications and theoretical insights

A multifunctional rhodamine derivative containing azo-salicylaldehyde (BBS) was designed and synthesized as a colorimetric and fluorescence turn-on probe for the selective detection of copper cations (Cu2+) and hypochlorite anions (OCl-) in aqueous media. In the presence of Cu2+, the probe BBS exhibited turn-on absorption and fluorescence change at 554 nm and 585 nm, respectively. The binding mechanism of BBS with Cu2+ induces the opening of a spirolactam ring in the rhodamine moiety by the formation of a metal-ligand complex, achieving 10-fold enhancement in fluorescence and quantum yield, along with a binding constant of 1 × 104 M-1 and a detection limit of 2.61 μM. Addition of OCl- enhanced the absorbance and fluorescence intensities at 520 nm and 575 nm, respectively. The probe BBS underwent hypochlorite-mediated oxidation, followed by hydrolysis, resulting in the formation of rhodamine B itself, which is detectable by the naked eye via the color and fluorescence enhancement by 11-fold with a high quantum yield and a detection limit of 1.96 μM. For practical applications, sensor BBS can be used to detect Cu2+ in water samples and on cotton swabs. For biological applications, the interaction of the BBS-Cu(II) complex with transport proteins such as bovine serum albumin (BSA) and ct-DNA was investigated through UV-vis and fluorescence titration experiments. Additionally, the structural optimization of BBS and the BBS-Cu(II) complex was demonstrated using DFT, and the interactions of the BBS-Cu(II) complex with BSA and ct-DNA were analysed through theoretical docking studies. Bioimaging studies were conducted by capturing fluorescence images of BBS with Cu2+ and OCl- in a physiological medium containing living plant tissue using green gram seeds.

Multiple DNA cycle amplification for highly efficient detection of mercury pollution in food

Mercury ion (Hg2+), a highly toxic metal pollutant, is widely found in the environment and can enter the human body through the food chain, causing various health issues. Sensitive and accurate methods for monitoring Hg2+ are highly desirable for ensuring food safety. Herein, we propose a self-sustainable multiple amplification system (MAS) for Hg2+ determination through the reciprocal activation between catalytic hairpin assembly (CHA) and rolling circle amplification (RCA). The thymine-encoded recognition element specifically recognizes Hg2+, triggering the exposure of the initiator. The initiator then motivates the mutual activation of CHA and RCA to accelerate the production of an exponentially amplified signal. The MAS method achieved a low detection limit of 11 pM. Due to its reliable target recognition and robust amplification efficiency, the MAS circuit facilitated the highly efficient and accurate analysis of low-abundance Hg2+ in milk and snakehead samples, thus providing a potentially new tool for food safety control.

A distinctive and proficient fluorescent switch for ratiometric recognition of the menacing cyanide ion: biological studies on MDA-MB-231 cells

A new fluorescent ratiometric switch (BOHB) was developed for swift and selective detection of cyanide ions in aqueous media without any interference from other competitive anions. Upon gradual addition of cyanide ions into the probe solution, a prominent fluorescence color change from yellow to cyan was observed under a UV chamber. The fluorescence changes thus observed were ratiometric, and the detection limit of this new probe was found to be (22.1 ± 0.89) μM, suggesting that the efficiency of BOHB for the detection of cyanide ions is brilliant even at a minute level. The blue shift in fluorescence intensity upon the addition of cyanide ions was attributed to the deprotonation mechanism of acidic protons present in BOHB. This phenomenon was further explored using 1H-NMR study, which supported the mechanism. Further, stability study was performed over a period of 5 days to prominently establish the stability of BOHB. The probe is also highly capable of recognizing CN- within a very short time-span (almost 15 seconds), thereby making it a brilliant fluorescent switch for the swift recognition of CN-. Furthermore, BOHB was employed for real water sample analysis to display its practical application. Besides, the easy-to-prepare dipstick experiment provides a simple, reusable and recyclable protocol for the suitable qualitative identification of CN-. Lastly, triple negative breast adenocarcinoma (MDA-MB-231) cells were made susceptible to CN- sensing in a biological system, thereby making BOHB a biomarker tool.

Ampicillin-derived carbon dots as the sensitive probe for the detection of Fe3+ and Cu2+ in living cells and water samples

Water-soluble N-doped fluorescent (FL) carbon dots (ACDs) were successfully fabricated hydrothermally using ampicillin sodium as sole precursor. The produced ACDs exhibit satisfactory optical behavior, favorable photostability, and acceptable water solubility. With bright blue emission at 450 nm, the ACDs were utilized for multivariate sensing Fe3+ and Cu2+ based on the synergistic effect of the inner filter effect (IFE) and static quenching with detection limits of 0.31 μM and 0.26 μM, respectively. The practicality of ACDs has been verified by the successful determination  of Fe3+ and Cu2+ in real water and living cells. These findings confirm the feasibility of the proposed ACDs as FL sensors for efficient and selective detection of Fe3+ and Cu2+, which present promising prospects for real-time monitoring these two metal ions  in environmental and biological systems.

Optical detection strategies for Ni(II) ion using metal-organic chemosensors: from molecular design to environmental applications

Nickel is an important element utilized in various industrial/metallurgical processes, such as surgical and dental prostheses, Ni-Cd batteries, paint pigments, electroplating, ceramics, computer magnetic tapes, catalysis, and alloy manufacturing. However, its extensive use and associated waste production have led to increased nickel pollution in soils and water bodies, which adversely affects human health, animals and plants. This issue has prompted researchers to develop various optical probes, hereafter luminescent/colorimetric sensors, for the facile, sensitive and selective detection of nickel, particularly in biological and environmental contexts. In recent years, numerous functionalized chemosensors have been reported for imaging Ni2+, both in vivo and in vitro. In this context, metal-based receptors offer clear advantages over conventional organic sensors (viz., organic ligands, polymers, and membranes) in terms of cost, durability, stability, water solubility, recyclability, chemical flexibility and scope. This review highlights recent advancements in the design and fabrication of hybrid receptors (i.e., metal complexes and MOFs) for the specific detection of Ni2+ ions in complex environmental and biological mixtures.

Selective and Sensitive Detection of Hg2+ and Ag+ by a Fluorescent and Colorimetric Probe with Large Stokes Shift

Development of fluorescent sensors with large Stokes shift for selective detection of heavy metals is of great importance. A novel fluorescent probe with extremely large Stokes shift (212 nm) was synthesized for selective and simultaneous detection of Hg2+ and Ag+ ions. The deep yellow probe turned colorless or pale yellow after addition of Hg2+ or Ag+. The new probe could be utilized for absorption spectral detection of Hg2+ and Ag+ both in ethanol and aqueous solution. Addition of Hg2+ and Ag+ ions caused significant decrease in the fluorescence intensity of the new probe and the selective recognition of Hg2+ and Ag+ was not interfered by common competitive metal ions including Li+, Na+, K+, Cu2+, Fe2+, Zn2+, Co2+, Ni2+, Mn2+, Sr2+, Ca2+, Mg2+, Al3+, Cr3+ and Fe3+. The detection limit for Hg2+ and Ag+ was calculated to be 4.68 μM and 4.29 μM, respectively. Application of the new probe for quantitative determination of Hg2+ and Ag+ concentrations in real water samples was accomplished.

Fluorescent and colorimetric dual-mode recognition of Al3+ in tablets based on chrome azurol S and pH-switchable boron, nitrogen co-doped carbon dots

The synthesis and characterization of pH-sensitive boron and nitrogen co-doped CDs (B, N-CDs) is reported. The fluorescence of B, N-CDs exhibited pH-responsive behavior within the range pH 3.0-6.0, attributed to their controlled aggregation and disaggregation. Interestingly, the fluorescence of B, N-CDs was quenched by the inner filter effect from chrome azurol S (CAS). With the subsequent addition of Al3+, the fluorescence of B, N-CDs was restored due to the formation of blue Al3+-CAS and B, N-CDs-Al3+ complexes. Consequently, a fluorescent and colorimetric dual-mode sensor for Al3+ detection was developed. The proposed sensor enabled Al3+ detection in the ranges and limits of detection of 3.75-22.5 μM and 2.67 μM for the fluorescent mode and 5-20 μM and 4.8 μM for the colorimetric mode, respectively. Furthermore, the efficacy of the sensor was validated through successful detection of Al3+ in tablet samples. The obtained B, N-CDs promised the application in acid condition and the proposed sensor is expected to be applied to in situ on-line detection of Al3+.

On-demand controlled bidirectional DNAzyme path for ultra-sensitive heavy metal ion detection

A bidirectional self-powered biosensor is constructed for the quasi-simultaneous detection of Pb2+ and Hg2+ based on MoS2@CuS heterostructures as an accelerator and hybridization chain reaction (HCR) as a signal amplification strategy. MoS2@CuS heterostructures significantly facilitate electron transfer between glucose and bioelectrodes, thereby greatly improving the detection signal of self-powered biosensors. This novel biosensor employs the unique sequences of DNAzymes to isolate Pb2+ and Hg2+ by the cleavage effect and thymine (T)-Hg2+-thymine (T) structures, respectively. In the process, Pb2+ cuts the sequence of DNAzyme at the bioanode to trigger glucose oxidation to monitor Pb2+. The as-formed T-Hg2+-T structures activate HCR to reduce [Ru(NH3)6]3+ to detect Hg2+ at the biocathode. It is noteworthy that this biosensor not only realizes Pb2+ or Hg2+ detection in a single-electrode, respectively, but also can quasi-simultaneously detect both Pb2+ and Hg2+ in the bioanode and the biocathode. The novel self-powered biosensor identifies Pb2+ in the range of 106 fM to 10 fM with a limit of detection (LOD) of 3.1 fM and Hg2+ in the range of 106 fM to 1 fM with an LOD of 0.33 fM.

Surface engineered metal-organic framework-based electrochemical biosensors for enzyme-mimic ultrasensitive detection of glucose: recent advancements and future perspectives

Metal-Organic Frameworks (MOFs) have garnered significant attention in the development of electrochemical glucose sensors due to their unique and advantageous properties. The highly tunable pore channels of MOFs facilitate optimal diffusion of glucose molecules, while their large specific surface area provides abundant active sites for electrochemical reactions. Furthermore, the well-dispersed metallic active sites within MOFs enhance electrocatalytic activity, thereby improving the sensitivity and selectivity of glucose detection. These features make MOF-based nanoarchitectures promising candidates for the development of efficient and sensitive glucose sensors, which are crucial for diabetes management and monitoring. The integration of enzymatic biosensors with nanotechnology continues to drive advancements in glucose monitoring, offering the potential for more accurate, convenient, and user-friendly tools for diabetes management. Current research explores non-invasive glucose monitoring methods, such as using sweat, saliva, or interstitial fluid instead of blood, aiming to reduce the discomfort and inconvenience associated with frequent blood sampling. A review of the advancements and applications of MOF-based enzyme-mimic electrochemical sensors for glucose monitoring can provide valuable insights for young researchers, inspiring future research in biomedical device fabrication. Such reviews not only offer a comprehensive understanding of the current state of the art but also highlight existing challenges and future opportunities in the field of enzyme-less glucose sensing, particularly in the surface modification techniques of highly porous MOFs. This fosters innovation and new research directions. By understanding the advantages, challenges, and opportunities, researchers can contribute to the development of more effective and innovative enzyme-mimic glucose sensing transducers, which are essential for advancing biomedical devices.

Amino-Functionalized Metal-Organic Framework as Fluorescence Probe for Cell Imaging and Doxorubicin Detection

In this study, an NH2-Cu-MOF was synthesized using the one-pot method and employed as a fluorescence probe for doxorubicin (DOX) detection. The synthesized NH2-Cu-MOF exhibited remarkable fluorescence recognition capabilities for detecting DOX. Within the concentration range of 1-100 µmol/L, a linear relationship was observed between the fluorescence intensity of the NH2-Cu-MOF and the DOX concentration. Furthermore, the synthesized NH2-Cu-MOF was effectively utilized for highly selective fluorescence quenching recognition and quantitative detection of DOX in the presence of multiple metal ions and other antibiotics. Despite interference from multiple metal ions and antibiotics, DOX was identified and quantified by highly selective fluorescence quenching with a detection limit of 2.1654 µmol/L. These findings underscore the potential of NH2-Cu-MOF as a class of "on-off" fluorescent probes for the rapid detection of DOX.

"Turn-on" fluorescence sensing for sensitively detecting Cr(VI) via a guest exchange process in Cu NCs@MIL-101 composites

Copper nanoclusters (Cu NCs) are a new fluorescent material that is often used for determining metal ions, but most sensing systems are based on the "turn-off" model. Here, a "turn-on" model of fluorescence sensing for the detection of Cr(VI) was developed based on Cu NCs@MIL-101 composites. The Cu NCs@MIL-101 composites were synthesized from a simple mixture of Cu NCs and MIL-101(Cr), in which the Cu NCs were uniformly distributed in MIL-101(Cr). Notably, the fluorescence intensity of Cu NCs@MIL-101 was significantly weakened due to the internal filtration effect (IFE) of MIL-101. When Cr(VI) was introduced, the fluorescence of Cu NCs@MIL-101 was recovered by the guest exchange process between Cr(VI) and the Cu NCs, which overcame the IFE of Cu NCs@MIL-101. Based on this, a "turn-on" fluorescence probe was successfully constructed for the quantitative detection of Cr(VI) with two linear ranges of 0.05-1 μM and 1-20 μM, and a low detection limit of 0.05 μM. The proposed fluorescence probe possessed excellent selectivity and anti-interference ability, and was successfully applied for the detection of Cr(VI) in real water samples with satisfactory results. This study provides a new approach for the analytical application of Cu NCs.

Non-Faradaic Impedimetric Detection of Heavy Metal Ions via a Hybrid Nanoparticle-DNAzyme Biosensor

Due to rapid industrialization, novel water-quality monitoring techniques for the detection of highly toxic and hazardous heavy metal ions are essential. Herein, a hybrid noble nanoparticle/DNAzyme electrochemical biosensor is proposed for the simultaneous and label-free detection of Pb2+ and Cr3+ in aqueous solutions. The sensor is based on the combination of a two-dimensional naked-platinum nanoparticle film and DNAzymes, whose double-helix configuration disassembles into smaller fragments in the presence of target-specific heavy metal ions. The electrochemical behavior of the fabricated sensor was investigated with non-faradaic electrochemical impedance spectroscopy (EIS), resulting in the successful detection of Pb2+ and Cr3+ well below their maximum permitted levels in tap water. So far, there has been no report on the successful detection of heavy metal ions utilizing the non-faradaic electrochemical impedance spectroscopy technique based on advanced nanomaterials paired with DNAzymes. This is also one of the few reports on the successful detection of chromium (III) via a sensor incorporating DNAzymes.

A highly effective peroxidase-mimic nanozyme of S, N-carbon dot-decorated cerium organic framework-based colorimetric detection of Hg2+ ion and thiophanate methyl

In this study, we proposed a colorimetric probe as S, N-carbon dot-decorated Ce-MOF (S, N-CD@Ce-MOF) for the dual detection of mercury and thiophanate methyl (TM), which are simultaneously present pollutants in the environment and foodstuffs. These pollutants cause serious threats to human health, such as carcinogenicity and neurovirulence. Herein, we synthesized S, N-CD@Ce-MOF using the hydrothermal method and applied it to a "turn-off-on" probe to detect mercury and TM using the colorimetric method in water and food samples. S, N-CD@Ce-MOF shows excellent peroxidase activity by catalyzing the chromogenic substrate of 3,3',5,5'-tetramethylbenzidine (TMB), resulting in deep blue-colored oxidized TMB product (ox TMB) in the presence of H2O2 with a UV absorption wavelength at 654 nm. However, the addition of Hg(II) ions prohibits the oxidation of TMB by an electron transfer effect and easily binds with -S, -N-containing sites on the surface of carbon dots, obstructing the catalytic active sites and decreasing catalytic efficiency with weak UV absorption at 654 nm as a "turn-off". Subsequently, the addition of TM to the above sensing solution as a "turn-on" was triggered by the TM-Hg complex formation and permitted TMB oxidation with a strong absorption peak at 654 nm. Furthermore, this proposed sensor demonstrates a superior linear response to mercury ions and TM in the ranges from 0 to 15 μM and 0 to 14 μM, respectively. The developed colorimetric assay exhibits good sensitivity and selectivity against various possible interferences. Furthermore, we found that the limits of detection for Hg2+ and TM were as low as 0.01 μM and 0.03 μM, respectively. The developed sensor provides various benefits, such as cost-effectiveness, simplicity without a complex detection process, and naked-eye detection. Consequently, our proposed colorimetric technique worked well for the detection of Hg2+ in real water samples and TM in real apple and tomato juice.

Recent advances in metal-organic framework (MOF)-based agricultural sensors for metal ions: a review

Metal ions have great significance for agricultural development, food safety, and human health. In turn, there exists an imperative need for the development of novel, sensitive, and reliable sensing techniques for various metal ions. Agricultural sensors for the diagnosis of both agricultural safety and nutritional health can establish quality and safety traceability systems of both agro-products and food to guarantee human health, even life safety. Metal-organic frameworks (MOFs) are utilized widely for the design of diversified sensors due to their distinctive structural characteristics and extraordinary optical and electrical properties. To serve agricultural sensors better, this review is dedicated to providing a brief overview of the synthesis of MOFs, the modification of MOFs, the fabrication of MOF-based film electrodes, the applications of MOF-based agricultural sensors for metal ions, which are centered on electrochemical sensors and optical sensors, and current challenges of MOF-based agricultural sensors. In addition, this review also provides potential future opportunities for the development and practical application of agricultural sensors.

Hybrid Nanoparticle/DNAzyme Electrochemical Biosensor for the Detection of Divalent Heavy Metal Ions and Cr3

A hybrid noble nanoparticle/DNAzyme electrochemical biosensor is proposed for the detection of Pb2+, Cd2+, and Cr3+. The sensor takes advantage of a well-studied material that is known for its selective interaction with heavy metal ions (i.e., DNAzymes), which is combined with metallic nanoparticles. The double-helix structure of DNAzymes is known to dissociate into smaller fragments in the presence of specific heavy metal ions; this results in a measurable change in device resistance due to the collapse of conductive inter-nanoparticle DNAzyme bridging. The paper discusses the effect of DNAzyme anchoring groups (i.e., thiol and amino functionalization groups) on device performance and reports on the successful detection of all three target ions in concentrations that are well below their maximum permitted levels in tap water. While the use of DNAzymes for the detection of lead in particular and, to some extent, cadmium has been studied extensively, this is one of the few reports on the successful detection of chromium (III) via a sensor incorporating DNAzymes. The sensor showed great potential for its future integration in autonomous and remote sensing systems due to its low power characteristics, simple and cost-effective fabrication, and easy automation and measurement.

Induced ultrasensitive electrochemical biosensor for target MDA-MB-231 cell cytoplasmic protein detection based on RNA-cleavage DNAzyme catalytic reaction

Herein, we implemented RNA-cleaving DNAzymes specific for the endogenous protein of breast cancer cells (MDA-MB -231) and programmed for electrochemical detection. Thionine-modified gold nanoparticles and modified magnetic nanoparticles are attached to the two ends of the DNAzyme molecule. The prepared probe is pulled to the surface of the electrode with the help of a magnetic field, and the signal caused by the electrochemical activity of thionine is observed on the surface of the electrode. The presence of a covalent gold nanoparticle-thionine hybrid as a highly electroactive/enhanced electrochemical label ensures a strong detection signal. After addition of the enzyme activator cofactor (MDA-MB -231 cytoplasmic cell protein), it reacts with the catalytic core of the enzyme sequence in the DNAzyme molecule and triggers the cleavage reaction in the substrate sequence of the DNAzyme molecule. During this process, the gold nanoparticle-thionine labels are detached from the probe and released into the solution. Inductive removal of gold nanoparticles leads to a decrease in the current related to the reduction of thionine on the electrode surface. The results show that this biosensor can detect this protein marker in the linear range of (1.0E-06 to 1.0E+01) pg/ml, with a detection limit (1.0129E-07 pg/ml), using differential pulse voltammetry as a measuring technique. As well as, electrochemical impedance spectroscopy (EIS).

A biodegradable and cofactor self-sufficient aptazyme nanoprobe for amplified imaging of low-abundance protein in living cells

Despite the progress on the analysis of proteins either in vitro or in vivo, detection and imaging of low-abundance proteins in living cells still remains challenging. Herein, a novel biodegradable and cofactor self-sufficient DNAzyme nanoprobe has been deve-loped for catalytic imaging of protein in living cells with signal amplification capacity. This DNAzyme nanoprobe is constructed by assembling a DNAzyme subunit-containing aptamer hairpin (HP), another DNAzyme subunit strand (DS), and the molecular beacon (MB) substrate strand onto pH-sensitive ZnO@polydopamine nanorods (ZnO@PDA NRs) that work as DNAzyme cofactor suppliers. Such a nanoprobe can facilitate cellular uptake of DNA molecules and protection of them from nuclease degradation as well as release of them in cells by lysosomal acid-triggered dissolution of ZnO@PDA NRs into Zn²⁺ as DNAzyme cofactor. Upon recognition and binding with the intracellular protein target, the stem of HP is opened, after which the opened HP hybridizes with DS and generates activated DNAzymes. Each activated DNAzyme can catalyze the cleavage of many MB substrates through true enzymatic multiple turnovers, resulting in the separation of the quenched fluorophore/quencher pair labeled in MB and the generation of significantly amplified fluorescence. Using nucleolin (NCL) as a model protein, this nanoprobe enables the analysis of NCL with a detection limit of 1.8 pM, which are at least two orders of magnitude lower than that of non-catalytic imaging probe. Moreover, it could accurately distinguish tumor cells and normal cells by live cell NCL imaging. And the experimental results are also further verified by flow cytometry assays. The developed nanoprobe can be easily extended to detect other biomolecules by the change of their corresponding aptamer sequences, thus providing a promising tool for highly sensitive imaging of low-abundance biomolecules in living cells.

Fluorescent Sensing of Glutathione and Related Bio-Applications

Glutathione (GSH), as the most abundant low-molecular-weight biological thiol, plays significant roles in vivo. Abnormal GSH levels have been demonstrated to be related to the dysfunction of specific physiological activities and certain kinds of diseases. Therefore, the sensing of GSH is emerging as a critical issue. Cancer, with typical high morbidity and mortality, remains one of the most serious diseases to threaten public health. As it is clear that much more concentrated GSH is present at tumor sites than at normal sites, the in vivo sensing of GSH offers an option for the early diagnosis of cancer. Moreover, by monitoring the amounts of GSH in specific microenvironments, effective diagnosis of ROS levels, neurological diseases, or even stroke has been developed as well. In this review, we focus on the fluorescent methodologies for GSH detection, since they can be conveniently applied in living systems. First, the fluorescent sensing methods are introduced. Then, the principles for fluorescent sensing of GSH are discussed. In addition, the GSH-sensing-related biological applications are reviewed. Finally, the future opportunities in in the areas of fluorescent GSH sensing-in particular, fluorescent GSH-sensing-prompted disease diagnosis-are addressed.

DNAzyme-based biosensors for mercury (Ⅱ) detection: Rational construction, advances and perspectives

Mercury contamination is one of the most severe issues in society due to its threats to public health and the ecological system. However, traditional methods for mercury ion detection are still limited by their time-consuming procedures, requirement of expensive instruments, and low selectivity. In recent decades, tremendous progress has been made in the development of functional nucleic acid-based, especially DNAzyme sensors for mercury (Ⅱ) (Hg²⁺) determination, including RNA-cleaving DNAzymes and G-quadruplex-based DNAzymes in particular. Researchers have heavily studied the construction of Hg²⁺ sensors, mainly originating from in vitro selection-derived DNAzymes, by incorporating T-Hg²⁺-T recognition moieties in existing DNAzyme scaffolds, and interfacing Hg²⁺-sensitive sequences with nanomaterials. In the last case, the employment of materials (as quenchers, signal transducers and DNA immobilizers) enriches the application scenarios of current Hg²⁺-DNAzymes, due to a combination of their functions. We summarize a broad range of sensing approaches, including optical, electrochemical, and other sensing methods, and compare their features. This review elaborates on the rational design strategies for engineering DNAzymes to selectively sense Hg²⁺, critically discusses their properties in different application scenarios, and summarizes recent advances in this field. Additionally, current progress, challenges and future perspectives are also discussed. This minireview provides deeper insights into the chemistry of these functional nucleic acids when working with Hg²⁺, explains the design ideas of DNAzyme-sensors in each platform, and reveals potential opportunities in developing more advanced DNAzyme sensors for the highly selective and sensitive recognition of Hg²⁺. ENVIRONMENTAL IMPLICATION: Mercury is one of the most toxic metallic contaminants due to its high toxicity, non-biodegradability, and serious human health risks when accumulated in the body. In the recent decade, intensive studies have focused on exploring mercury sensors by combining DNAzymes with various sensing methods, paving a promising avenue to gain ultra-high sensitivity and selectivity. However, so far, no review has introduced the recent advances on DNAzyme-based sensors for mercury detection in a critical way. In this review, we comprehensively summarized the studies on DNAzyme-based sensors for mercury detection using various sensing techniques including optical, electrochemical and other sensing methods.

Application of Nanomaterial Modified Aptamer-Based Electrochemical Sensor in Detection of Heavy Metal Ions

Heavy metal pollution resulting from significant heavy metal waste discharge is increasingly serious. Traditional methods for the detection of heavy metal ions have high requirements on external conditions, so developing a sensitive, simple, and reproducible detection method is becoming an urgent need. The aptamer, as a new kind of artificial probe, has received more attention in recent years for its high sensitivity, easy acquisition, wide target range, and wide use in the detection of various harmful substances. The detection platform that an aptamer-based electrochemical biosensor (E-apt sensor) provides is a new approach for the detection of heavy metal ions. Nanomaterials are particularly important in the construction of E-apt sensors, as they can be used as aptamer carriers or sensitizers to stimulate or inhibit electrochemical signals, thus significantly improving the detection sensitivity. This review summarizes the application of different types of nanomaterials in E-apt sensors. The construction methods and research progress of the E-apt sensor based on different working principles are systematically introduced. Moreover, the advantages and challenges of the E-apt sensor in heavy metal ion detection are summarized.

A novel dual-emission fluorescent probe for ratiometric and visual detection of Cu2+ ions and Ag+ ions

In this work, the biomolecule glutathione was used to prepare cyan fluorescent carbon dots (GSH@CDs) by a hydrothermal method. The GSH@CDs were adopted as the scaffolds to synthesize fluorescent gold nanoclusters (GSH@CDs-Au NCs) with two independent emission peaks at 430 nm and 700 nm. A fluorescent method for the Cu²⁺ and Ag⁺ ion assay was established based on the fluorescence quenching or enhancement at 700 nm of GSH@CDs-Au NCs. The fluorescent test strips were successfully prepared for visual detection of Cu²⁺ ions and Ag⁺ ions based on GSH@CDs-Au NCs. In addition, GSH@CDs-Au NCs were found to possess well peroxidase-like activity.

Versatile Sensing Platform of Innovative Copper Oxide Assisted Cu-Phenolic Coordination Nanosheet mediated Fluorophore tagged GT-rich SSA based Fluorescence ON-OFF Biosensor for Subsequent Detection of Cd2+ and S2− Ions

Increased levels of toxic metal/non-metal ions Cadmium (Cd2+) and Sulfide (S2−) in the environment can be detrimental to human health. Given the circumstances, the detection and measurement of Cd2+ and...

Recent Advances on Functional Nucleic-Acid Biosensors

In the past few decades, biosensors have been gradually developed for the rapid detection and monitoring of human diseases. Recently, functional nucleic-acid (FNA) biosensors have attracted the attention of scholars due to a series of advantages such as high stability and strong specificity, as well as the significant progress they have made in terms of biomedical applications. However, there are few reports that systematically and comprehensively summarize its working principles, classification and application. In this review, we primarily introduce functional modes of biosensors that combine functional nucleic acids with different signal output modes. In addition, the mechanisms of action of several media of the FNA biosensor are introduced. Finally, the practical application and existing problems of FNA sensors are discussed, and the future development directions and application prospects of functional nucleic acid sensors are prospected.

Preparation of Large Conjugated Polybenzimidazole Fluorescent Materials and Their Application in Metal Ion Detection

A new type of conjugated polybenzimidazole (CPBI) was synthesized through a simple polycondensation reaction without metal catalysis, and N-alkylation modification was carried out to solve the problems of solubility and fluorescence properties. A series of nano-microsphere polymers CPBI_n with large conjugation, good solubility, and strong fluorescence has been successfully used as “turn-off” fluorescent probes for the first time. The results show that, under suitable N-alkylation conditions, the obtained CPBI_n can be used as a highly sensitive and selective fluorescent probe for the detection of Cu²⁺ and Zn²⁺ at the same time, and their detection limits are both nM levels. In addition, CPBI₂ can be designed as an ultra-sensitive IMPLICATION logic gate at the molecular level, cyclically detecting Cu²⁺. With the test paper containing CPBI₂, easy and quick on-site detection can be achieved. This research provides a new idea for the brief synthesis of multifunctional materials.