Ratiometric Monitoring of Intracellular Drug Release by an Upconversion Drug Delivery Nanosystem

Recent advances of copper-based metal phenolic networks in biomedical applications

Metal-phenolic Networks (MPNs) are a novel class of nanomaterial developed gradually in recent years which are self-assembled by metal ions and polyphenolic ligands. Due to their environmental protection, good adhesion, and biocompatibility with green phenolic ligands, MPNs can be used as a new type of nanomaterial. They show excellent properties such as anti-inflammatory, antioxidant, antibacterial, and anticancer, and have been widely studied in the biomedical field. As one of the most common subclasses of the MPNs family, copper-based MPNs have been widely studied for drug delivery, Photodynamic Therapy (PDT), Chemo dynamic Therapy (CDT), antibacterial and anti-inflammatory, bone tissue regeneration, skin regeneration wound repair, and metal ion imaging. In this paper, the preparation strategies of different types of copper-based MPNs are reviewed. Then, the application status of copper-based MPNs in the biomedical field under different polyphenol ligands is introduced in detail. Finally, the existing problems and challenges of copper-based MPNs are discussed, as well as their future application prospects in the biomedical field.

Highly Efficient Ultraviolet Third-Harmonic Generation in an Isolated Thin Si Meta-Structure

Nonlinear nanophotonic devices have shown great potential for on-chip information processing, quantum source, 3D microfabrication, greatly promoting the developments of integrated optics, quantum science, nanoscience and technologies, etc. To promote the applications of nonlinear nanodevices, improving the nonlinear efficiency, expanding the spectra region of nonlinear response and reducing device thickness are three key issues. Herein, this study focuses on the nonlinear effect of third-harmonic generation (THG), and present a thin Si meta-sructure to improve the THG efficiency in the ultraviolet (UV) region. The measured THG efficiency is up to 10-5 at an emission wavelength of 309 nm. Also, the THG nanosystem is only 100 nm in thickness, which is two-five times thinner than previous all-dielectric nanosystems applied in THG studies. These findings not only present a powerful thin meta-structure with highly efficient THG emission in UV region, but also provide a constructive avenue for further understanding the light-matter interactions at subwavelength scales, guiding the design and fabricating of advanced photonic devices in future.

Exploring the potential of lanthanide-doped oxyfluoride materials for bright green upconversion and their promising applications towards temperature sensing and drug delivery

The most efficient upconversion (UC) materials reported to date are based on fluoride hosts with low phonon energies, which reduce the amount of nonradiative transitions. In particular, NaYF4 doped with Yb3+ and Er3+ at appropriate ratios is known as one of the most efficient UC phosphors. However, its low thermal stability limits its use for certain applications. On the other hand, oxide hosts exhibit better thermal stability, yet they have higher phonon energies and are thus prone to lower UC efficiencies. As a result, developing host nanomaterials that combine the robustness of oxides with the high upconversion efficiencies of fluorides remains an intriguing prospect. Herein, we demonstrate the formation of ytrrium doped oxyfluoride (YOF:Yb3+,Er3+) particles, which are prepared by growing a NaYF4:Yb3+,Er3+ layer around SiO2 spherical particles and consecutively applying a high-temperature annealing step followed by the removal of SiO2 template. Our interest lies in employing these materials as Boltzmann type physiological range luminescence thermometers, but their weak green emission is a drawback. To overcome this issue, and engineer materials suitable for Boltzmann type thermometry, we have studied the effect of introducing different metal ion co-dopants (Gd3+, Li+ or Mn2+) into the YOF:Yb3+,Er3+ particles, focusing on the overall emission intensity, as well as the green to red ratio, upon 975 nm laser excitation. These materials are explored for their use as ratiometric thermometers, and further also as drug carriers, including their simultaneous use for these two applications. The investigation also includes examining their level of toxicity towards specific human cells - normal human dermal fibroblasts (NHDFs) - to evaluate their potential use for biological applications.

Erbium-ytterbium containing upconversion mesoporous bioactive glass microspheres for tissue engineering: luminescence monitoring of biomineralization and drug release

The development of functional biomaterials with real-time monitoring of mineralization processes, drug release and biodistribution has potential applications but remains an unsolved challenge. Herein, erbium- and ytterbium- containing mesoporous bioactive glass microspheres (MBGs:Er/Yb) with blue and red emission at an excitation wavelength of 980 nm were synthesized by a sol-gel combined with organic template method. As the concentration of Yb3+ ions gradually increases, the emission intensity of the MBGs:Er/Yb exhibits a clear concentration quenching effect. Combined with in vitro bioactivity tests, the optimal molar ratio of Er3+/Yb3+ was determined to be 4:3. Therefore, MBGs:4Er/3Yb was selected for in vitro biomineralization and drug release monitoring. The results of biomineralization monitoring show that the upconversion luminescence intensity is closely related to the degree of biomineralization. The upconversion luminescence intensity of MBGs:4Er/3Yb is quenched with the increase of the degree of biomineralization. The degree of luminescence quenching during biomineralization can be semiquantized. Drug release monitoring experiments showed that the anticancer drug doxorubicin hydrochloride (DOX) was successfully loaded into MBGs:4Er/3Yb and selectively quenched the green emission. When DOX was released, the green emission recovered stably, and It/I0 increased gradually. Moreover, there was a linear relationship between It/I0 and cumulative drug release, indicating that DOX-MBGs:4Er/3Yb is highly sensitive to DOX release, and monitoring the It/I0 values of DOX-MBGs:4Er/3Yb can achieve real-time tracking of the DOX release process to a certain extent. In conclusion, MBGs:4Er/3Yb has potential application as an upconversion luminescence biomonitoring material in the field of bone tissue engineering. STATEMENT OF SIGNIFICANCE: Mesoporous bioactive glasses have great potential for applications in bone tissue repair due to their excellent biological properties, but the effective information of the repair process cannot be grasped in a timely manner. Therefore, real-time monitoring of mineralization and drug release processes will be beneficial to obtain the degree of healing and optimize the amount and distribution of drugs to improve targeted therapeutic effects. For biomaterials, in vitro biological properties determine their biological properties in vivo, where the environment is more complex and diverse, and thus in vitro biomonitoring is particularly crucial. The organic combination of physical properties and biological properties will also provide a feasible idea for the development of biomaterials.

Ratiometric upconversion luminescence nanoprobes from construction to sensing, imaging, and phototherapeutics

In terms of the combined advantages of upconversion luminescence (UCL) properties and dual-signal ratiometric outputs toward specific targets, the ratiometric UCL nanoprobes exhibit significant applications. This review summarizes and discusses the recent advances in ratiometric UCL nanoprobes, mainly including the construction of nanoprobe systems for sensing, imaging, and phototherapeutics. First, the construction strategies are introduced, involving different types of nanoprobe systems, construction methods, and ratiometric dual-signal modes. Then, the sensing applications are summarized, involving types of targets, sensing mechanisms, sensing targets, and naked-eye visual detection of UCL colors. Afterward, the phototherapeutic applications are discussed, including bio-toxicity, bio-distribution, biosensing, and bioimaging at the level of living cells and small animals, and biomedicine therapy. Particularly, each section is commented on by discussing the state-of-the-art relevant studies on ratiometric UCL nanoprobe systems. Moreover, the current status, challenges, and perspectives in the forthcoming studies are discussed. This review facilitates the exploration of functionally luminescent nanoprobes for excellent sensing, imaging, biomedicine, and multiple applications in significant fields.

DNA Supramolecular Assembly on Micro/Nanointerfaces for Bioanalysis

ConspectusFacing increasing demand for precision medicine, materials chemistry systems for bioanalysis with accurate molecular design, controllable structure, and adjustable biological activity are required. As a genetic biomacromolecule, deoxyribonucleic acid (DNA) is created via precise, efficient, and mild processes in life systems and can in turn precisely regulate life activities. From the perspective of materials chemistry, DNA possesses the characteristics of sequence programmability and can be endowed with customized functions by the rational design of sequences. In recent years, DNA has been considered to be a potential biomaterial for analysis and has been applied in the fields of bioseparation, biosensing, and detection imaging. To further improve the precision of bioanalysis, the supramolecular assembly of DNA on micro/nanointerfaces is an effective strategy to concentrate functional DNA modules, and thus the functions of DNA molecules for bioanalysis can be enriched and enhanced. Moreover, the new modes of DNA supramolecular assembly on micro/nanointerfaces enable the integration of DNA with the introduced components, breaking the restriction of limited functions of DNA materials and achieving more precise regulation and manipulation in bioanalysis. In this Account, we summarize our recent work on DNA supramolecular assembly on micro/nanointerfaces for bioanalysis from two main aspects. In the first part, we describe DNA supramolecular assembly on the interfaces of microscale living cells. The synthesis strategy of DNA is based on rolling-circle amplification (RCA), which generates ultralong DNA strands according to circular DNA templates. The templates can be designed with complementary sequences of functional modules such as aptamers, which allow DNA to specifically bind with cellular interfaces and achieve efficient cell separation. In the second part, we describe DNA supramolecular assembly on the interfaces of nanoscale particles. DNA sequences are designed with functional modules such as targeting, drug loading, and gene expression and then are assembled on interfaces of particles including upconversion nanoparticles (UCNPs), gold nanoparticles (AuNPs), and magnetic nanoparticle (MNPs). The integration of DNA with these functional particles achieves cell manipulation, targeted tumor imaging, and cellular regulation. The processes of interfacial assembly are well controlled, and the functions of the obtained bioanalytical materials can be flexibly regulated. We envision that the work on DNA supramolecular assembly on micro/nanointerfaces will be a typical paradigm for the construction of more bioanalytical materials, which we hope will facilitate the development of precision medicine.

Intracellular Self-Immolative Polyprodrug with Near-Infrared Light Guided Accumulation and in Vivo Visualization of Drug Release

The selective accumulation and real-time monitoring of drug release at tumor site are the key bottlenecks to the clinical translation of polyprodrug. Herein, an intracellular self-immolative polyprodrug (PMTO) is exploited, which not only shows the enhanced cellular internalization and selective accumulation in tumor site under the mild hyperthermia triggered by laser irradiation, but also possesses the self-monitoring drug release ability in vivo. The polyprodrug amphiphiles are synthesized by sequential esterification reaction, and hydrophilic poly(ethylene glycol) serves as blocking agent. On account of the mild hyperthermia produced by PMTO under the laser irradiation at tumor site, the cell membranous permeability increases, resulting in the enhanced cellular internalization and drug accumulation in tumor. After internalized by cells, the self-immolative PMTO nanoparticles can release free mitoxantrone (MTO) in intracellular reductive environment, and ratiometric photoacoustic imaging based on distinct signals between MTO and PMTO is presented to trace the drug release in vivo. Finally, this self-monitoring polyprodrug presents significant tumor suppression efficacy, which exhibits great potential for guiding the clinical medication in cancer treatment.

Advanced NIR ratiometric probes for intravital biomedical imaging

Near-infrared (NIR) fluorescence imaging technology (NIR-I region, 650-950 nm and NIR-II region, 1000-1700 nm), with deeper tissue penetration and less disturbance from auto-fluorescence than that in visible region (400-650 nm), is playing a more and more extensive role in the field of biomedical imaging. With the development of precise medicine, intelligent NIR fluorescent probes have been meticulously designed to provide more sensitive, specific and accurate feedback on detection. Especially, recently developed ratiometric fluorescent probes have been devoted to quantify physiological and pathological parameters with a combination of responsive fluorescence changes and self-calibration. Herein, we systemically introduced the construction strategies of NIR ratiometric fluorescent probes and their applications in biological imagingin vivo, such as molecular detection, pH and temperature measurement, drug delivery monitoring and treatment evaluation. We further summarized possible optimization on the design of ratiometric probes for quantitative analysis with NIR fluorescence, and prospected the broader optical applications of ratiometric probes in life science and clinical translation.

Er3+-Ions-Doped Multiscale Nanoprobes for Fluorescence Imaging in Cellular and Living Mice

With the development of biotechnology, luminescent nanoprobes for biological disease detection are widely used. However, the further application in clinic is limited by the reduced penetration depth in the tissues and light scattering. In this work, we have synthesized NaYF4:Yb,Er,Ce@SiO2-OAlg nanomaterials, which have both upconversion and near-infrared (NIR) luminescence. The optimized probes were determined to achieve cell imaging by its upconversion (UCL) luminescence and in vivo imaging through collection of NIR fluorescence signals simultaneously. The research is conducive to developing accurate diagnostic techniques based on UCL and NIR fluorescence imaging by a single nanoparticle.

Lanthanide-Based Nanosensors: Refining Nanoparticle Responsiveness for Single Particle Imaging of Stimuli

Lanthanide nanoparticles (LNPs) are promising sensors of chemical, mechanical, and temperature changes; they combine the narrow-spectral emission and long-lived excited states of individual lanthanide ions with the high spatial resolution and controlled energy transfer of nanocrystalline architectures. Despite considerable progress in optimizing LNP brightness and responsiveness for dynamic sensing, detection of stimuli with a spatial resolution approaching that of individual nanoparticles remains an outstanding challenge. Here, we highlight the existing capabilities and outstanding challenges of LNP sensors, en-route to nanometer-scale, single particle sensor resolution. First, we summarize LNP sensor read-outs, including changes in emission wavelength, lifetime, intensity, and spectral ratiometric values that arise from modified energy transfer networks within nanoparticles. Then, we describe the origins of LNP sensor imprecision, including sensitivity to competing conditions, interparticle heterogeneities, such as the concentration and distribution of dopant ions, and measurement noise. Motivated by these sources of signal variance, we describe synthesis characterization feedback loops to inform and improve sensor precision, and introduce noise-equivalent sensitivity as a figure of merit of LNP sensors. Finally, we project the magnitudes of chemical and pressure stimulus resolution achievable with single LNPs at nanoscale resolution. Our perspective provides a roadmap for translating ensemble LNP sensing capabilities to the single particle level, enabling nanometer-scale sensing in biology, medicine, and sustainability.

Yolk-shell nanovesicles endow glutathione-responsive concurrent drug release and T1 MRI activation for cancer theranostics

The effort of incorporating therapeutic drugs with imaging agents has been one of the mainstreams of nanomedicine, which holds great promise in cancer treatment in terms of monitoring therapeutic drug activity and evaluating prognostic index. However, it is still technically challenging to develop nanomedicine endowing a spatiotemporally controllable mechanism of drug release and activatable imaging capability. Here, we developed a yolk-shell type of GSH-responsive nanovesicles (NVs) in which therapeutic drug (Doxorubicin, DOX) and magnetic resonance imaging (MRI) contrast agent (ultrasmall paramagnetic iron oxide nanoparticles, USPIO NPs) formed complexes (denoted as USD) and were encapsulated inside the NVs. The formation of USD complexes is mediated by both the electrostatic adsorption between DOX and poly(acrylic acid) (PAA) polymers and the DOX-iron coordination effect on USPIO NPs. The obtained USD NVs showed a unique yolk-shell structure with restrained drug activity and quenched T1 MRI contrast ability which, on the other hand, can respond to glutathione (GSH) and lead to drug release and T1 contrast activation in a spatiotemporally concurrent manner. Furthermore, the USD NVs exhibited great potential to kill HCT116 cancer cells in vitro and effectively inhibit the tumor growth in vivo. This study may shed light on the design of sophisticated nanotheranostics in precision nanomedicine.

Real-time monitoring of pH-responsive drug release using a metal-phenolic network-functionalized upconversion nanoconstruct

Smart drug delivery nanosystems with integrated real-time monitoring capability have attracted great attention in recent years; however, they are still in a nascent stage due to a lack of proper imaging modalities. Herein, we present a novel pH-responsive drug delivery nanosystem in which a coordination complex of tannic acid and Cu2+ ions was successfully functionalized onto the surface of mesoporous silica-coated upconversion nanoparticles (UCNPs) to block premature release of the anti-cancer drug doxorubicin (DOX) from the mesopores of the particles. In addition, loading of the drug enables luminescence resonance energy transfer (LRET) from the UCNPs to DOX, which results in quenching of the emission of the UCNPs. The metal-phenolic networks are degraded in the acidic environment in living cells, leading to DOX release from the mesopores and thus to elimination of LRET. Therefore, the changes in upconversion luminescence enable monitoring of the pH-triggered drug release in real-time. This strategy will facilitate the design of smart drug delivery systems and theranostics.

The impact of light irradiation timing on the efficacy of nanoformula-based photo/chemo combination therapy

Photo/chemo combination therapy has been demonstrated to be a generally more powerful strategy for treating cancers than a single treatment modality. However, it is unknown whether the timing of light irradiation has any impact on therapeutic efficacy. We designed a carrier-free and self-monitoring nanodrug to monitor the entire dual-drug release profile and determined the impact of photodynamic therapy (PDT) at different time points. The designed nanodrug consists of the chemotherapeutic doxorubicin (DOX) and the photosensitizer pheophorbide A (PhA). The drugs form a fluorescence resonance energy transfer (FRET) pair (DOX transferring energy to PhA) when present at a precise ratio in the combination nanodrug. Due to the FRET effect, the DOX-PhA nanoparticles (NPs) show PhA fluorescence in a normal pH environment (such as cytoplasm). However, the FRET effect is lost when the NPs are disassembled in an acidic environment (such as lysosomes), and the DOX fluorescence is recovered. By real-time fluorescence variation monitoring, we determined the key time points when the drugs reached various subcellular locations, which helped us to determine the PDT-triggering time points and investigate the impact on the therapeutic effect in the combination therapy. Furthermore, the PDT was triggered at these established time points both in vitro and in vivo, which revealed that the best PDT-triggering time point in the combination therapy was achieved after nuclear entry of DOX. The study suggests that the optimization of combination therapy, not only photo/chemo but also chemo/chemo combination therapy, may require not only a controlled drug ratio but also a controlled drug release profile and target arrival time.

Ratiometric optical nanoprobes enable accurate molecular detection and imaging

Exploring and understanding biological and pathological changes are of great significance for early diagnosis and therapy of diseases. Optical sensing and imaging approaches have experienced major progress in this field. Particularly, an emergence of various functional optical nanoprobes has provided enhanced sensitivity, specificity, targeting ability, as well as multiplexing and multimodal capabilities due to improvements in their intrinsic physicochemical and optical properties. However, one of the biggest challenges of conventional optical nanoprobes is their absolute intensity-dependent signal readout, which causes inaccurate sensing and imaging results due to the presence of various analyte-independent factors that can cause fluctuations in their absolute signal intensity. Ratiometric measurements provide built-in self-calibration for signal correction, enabling more sensitive and reliable detection. Optimizing nanoprobe designs with ratiometric strategies can surmount many of the limitations encountered by traditional optical nanoprobes. This review first elaborates upon existing optical nanoprobes that exploit ratiometric measurements for improved sensing and imaging, including fluorescence, surface enhanced Raman scattering (SERS), and photoacoustic nanoprobes. Next, a thorough discussion is provided on design strategies for these nanoprobes, and their potential biomedical applications for targeting specific biomolecule populations (e.g. cancer biomarkers and small molecules with physiological relevance), for imaging the tumor microenvironment (e.g. pH, reactive oxygen species, hypoxia, enzyme and metal ions), as well as for intraoperative image guidance of tumor-resection procedures.

A quantitative study of the intracellular fate of pH-responsive doxorubicin-polypeptide nanoparticles

Nanoscale carriers with an acid-labile linker between the carrier and drug are commonly used for drug delivery. However, their efficacy is potentially limited by inefficient linker cleavage, and lysosomal entrapment of drugs. To address these critical issues, we developed a new imaging method that spatially overlays the location of a nanoparticle and the released drug from the nanoparticle, on a map of the local intracellular pH that delineates individual endosomes and lysosomes, and the therapeutic intracellular target of the drug-the nucleus. We used this method to quantitatively map the intracellular fate of micelles of a recombinant polypeptide conjugated with doxorubicin via an acid-labile hydrazone linker as a function of local pH and time within live cells. We found that hydrolysis of the acid-labile linker is incomplete because the pH range of 4-7 in the endosomes and lysosomes does not provide complete cleavage of the drug from the nanoparticle, but that once cleaved, the drug escapes the acidic endo-lysosomal compartment into the cytosol and traffics to its therapeutic destination-the nucleus. This study also demonstrated that unlike free drug, which enters the cytosol directly through the cell membrane and then traffics into the nucleus, the nanoparticle-loaded drug almost exclusively traffics into endosomes and lysosomes upon intracellular uptake, and only reaches the nucleus after acid-triggered drug release in the endo-lysosomes. This methodology provides a better and more quantitative understanding of the intracellular behavior of drug-loaded nanoparticles, and provides insights for the design of the next-generation of nanoscale drug delivery systems.

A facile supramolecular approach to fabricate multifunctional upconversion nanoparticles as a versatile platform for drug loading, in vivo delivery and tumor imaging

Multifunctional upconversion nanoparticles (UCNPs) that can be implemented in theranostic applications are particularly attractive scaffolds for precise drug delivery. However, most of the current methods for drug formulation are technically complicated, thereby impeding their use in the clinic. Here, we report on the preparation of a lipophilic cytotoxic prodrug-integrated and polyethylene glycol (PEG)-cloaked UCNPs scaffold through a facile one-pot supramolecular approach. By choosing 7-ethyl-10-hydroxycamptothecin (SN38)-derived prodrug 1 as a model chemotherapeutic, we show that this lipophilic prodrug can be feasibly self-assembled onto the surface of UCNPs, which are cooperatively solubilized by PEGylated phospholipids. The resulting SN38 prodrug 1-encapsulated UCNPs (designated 1@pUCNPs) produce a stable colloidal system in aqueous solution, making it suitable for intravenous injection. The SN38 drug loading capacity in pUCNPs is as high as ∼12.3 wt%, and a sustained drug release profile is observed, indicating that the drug payloads can be transported to targeted tumor sites via the enhanced permeability and retention (EPR) effect. Upconversion luminescence (UCL) imaging, including in vivo and ex vivo imaging, suggests that the drug-loaded pUCNPs remain stable in tumors over a long time and preferentially accumulate in tumors presumably via the EPR effect. Furthermore, the 1@pUCNPs show superior therapeutic outcomes compared with the clinically approved SN38 prodrug CPT-11 in the Bcap-37 mouse model of breast cancer. Collectively, our results demonstrate that pUCNPs facilely constructed in a one-pot self-assembly manner may be used as a versatile platform, enabling synchronous in vivo delivery of poorly water-soluble drugs and tumor imaging.

Efficient Third Harmonic Generation and Nonlinear Subwavelength Imaging at a Higher-Order Anapole Mode in a Single Germanium Nanodisk

Benefiting from large intrinsic nonlinearities, low absorption, and high field enhancement abilities, all-dielectric nanoantennas are considered essential for efficient nonlinear processes at subwavelength volumes. In particular, when the dielectric nanoantenna supports the nonradiating anapole mode, characterized by a minimum in the extinction cross section and a maximum electric energy within the material, third harmonic generation (THG) processes can be greatly enhanced. In this work, we demonstrate that a higher-order anapole mode in a 200 nm thick germanium nanodisk delivers the highest THG efficiency on the nanoscale at optical frequencies. By doubling the diameter of a disk supporting the fundamental anapole mode, we discover the emergence of an anapole mode of higher order, with a valley in the extinction cross section significantly narrower than that of the fundamental anapole. Under this condition, we observe a highly improved electric field confinement effect within the dielectric disk, leading to THG conversion efficiencies as large as 0.001% at a third harmonic wavelength of 550 nm. In addition, by mapping the THG emission across the nanodisk, we are able to unveil the anapole near-field intensity distributions, which show excellent agreement with numerical simulations. Our findings remarkably expand contemporary knowledge on localized modes in dielectric nanosystems, revealing crucial elements for the elaboration of highly efficient frequency upconversion nanodevices.

Resonance Energy Transfer in Upconversion Nanoplatforms for Selective Biodetection

Resonance energy transfer (RET) describes the process that energy is transferred from an excited donor to an acceptor molecule, leading to a reduction in the fluorescence emission intensity of the donor and an increase in that of the acceptor. By this technique, measurements with the good sensitivity can be made about distance within 1 to 10 nm under physiological conditions. For this reason, the RET technique has been widely used in polymer science, biochemistry, and structural biology. Recently, a number of RET systems incorporated with nanoparticles, such as quantum dots, gold nanoparticles, and upconversion nanoparticles, have been developed. These nanocrystals retain their optical superiority and can act as either a donor or a quencher, thereby enhancing the performance of RET systems and providing more opportunities in excitation wavelength selection. Notably, lanthanide-doped upconversion nanophosphors (UCNPs) have attracted considerable attention due to their inherent advantages of large anti-Stoke shifts, long luminescence lifetimes, and absence of autofluorescence under low energy near-infrared (NIR) light excitation. These nanoparticles are promising for the biodetection of various types of analytes. Undoubtedly, the developments of those applications usually rely on resonance energy transfer, which could be regarded as a flexible technology to mediate energy transfer from upconversion phosphor to acceptor for the design of luminescent functional nanoplatforms. Currently, researchers have developed many RET-based upconversion nanosystems (RET-UCNP) that respond to specific changes in the biological environments. Specifically, small organic molecules, biological molecules, metal-organic complexes, or inorganic nanoparticles were carefully selected and bound to the surface of upconversion nanoparticles for the preparation of RET-UCNP nanosystems. Benefiting from the advantage and versatility offered by this technology, the research of RET-based upconversion nanomaterials should have significant implications for advanced biomedical applications. It should be noted that energy transfer in a UCNP based nanosystem is most often related to resonance energy transfer but that reabsorption (and maybe other energy transfer processes) may also play an important role and that more studies regarding the fundamental aspects for energy transfer with UCNPs is necessary. In this Account, we present an overview of recent advances in RET-based upconversion nanocomposites for biodetection with a particular focus on our own work. We have designed a series of upconversion nanoplatforms with remarkably high versatility for different applications. The experience gained from our strategic design and experimental investigations will allow for the construction of next-generation luminescent nanoplatform with marked improvements in their performance. The key aspects of this Account include fundamental principles, design and preparation strategies, biodetection in vitro and in vivo, future opportunities, and challenges of RET-UCNP nanosystems.

Targetable N-annulated perylene-based colorimetric and ratiometric near-infrared fluorescent probes for the selective detection of hydrogen sulfide in mitochondria, lysosomes, and serum

The N-annulated perylene-based ratiometric NIR fluorescent probes were firstly developed to detect H₂S in mitochondria, lysosomes, and serum.

Synergistically enhanced upconversion luminescence in Li+-doped core–shell-structured ultrasmall nanoprobes for dual-mode deep tissue fluorescence/CT imaging

The development of upconversion luminescence that allows for multimodal imaging in terms of resolution and penetration depth using a single system is attracting increasing interest for use in clinical molecular imaging and diagnostics.

Water-soluble photoluminescent fullerene capped mesoporous silica for pH-responsive drug delivery and bioimaging

In this paper, a biocompatible and water-soluble fluorescent fullerene (C₆₀-TEG-COOH) coated mesoporous silica nanoparticle (MSN) was successfully fabricated for pH-sensitive drug release and fluorescent cell imaging. The MSN was first reacted with 3-aminopropyltriethoxysilane to obtain an amino-modified MSN, and then the water-soluble C₆₀ with a carboxyl group was used to cover the surface of the MSN through electrostatic interaction with the amino group in PBS solution (pH = 7.4). The release of doxorubicin hydrochloride (DOX) could be triggered under a mild acidic environment (lysosome, pH = 5.0) due to the protonation of C₆₀-TEG-COO^-, which induced the dissociation of the C₆₀-TEG-COOH modified MSN (MSN@C₆₀). Furthermore, the uptake of nanoparticles by cells could be tracked because of the green fluorescent property of the C₆₀-modified MSN. In an in vitro study, the prepared materials showed excellent biocompatibility and the DOX-loaded nanocarrier exhibited efficient anticancer ability. This work offered a simple method for designing a simultaneous pH-responsive drug delivery and bioimaging system.

Hurdles in selection process of nanodelivery systems for multidrug-resistant cancer

PURPOSE

Most of the nanomedicines for treatment of multidrug-resistant cancer do not reach Phase III trials and many are terminated or withdrawn or are in an indeterminate state since long without any study results being presented. Extensive perusal of nanomedicine development research revealed that one of the critical aspects influencing clinical outcomes and which requires diligent scrutiny is selection process of nanodelivery system.

METHODS

Research papers and articles published on development of nanodelivery systems for treatment of multidrug-resistant cancer were analyzed. Observations and conclusions noted by these researchers which might shed some light on poor clinical performance of nanocarriers were collated and summarized under observation section. Further research articles were studied to find possible solutions which may be applied to these particular problems for resolving them. The inferences of these findings were composed in Result section.

RESULT

Plausible solutions for the observed obstacles were noted as examples of novel formulations that can yield the following: better in vivo imaging, precise targeting and dosing of a specific site and specific cell type in a particular cancer, modulation of tumor surroundings, intonation of systemic effects and high reproducibility.

CONCLUSION

The angle of approach to the development of best nanosystem for a specific type of tumor needs to be spun around. Some of these changes can be brought about by individual scientists, some need to be established by collated efforts of scientists globally and some await advent of better technologies. Regardless of the stratagem, it can be said decisively that the schematics of development phase need rethinking.

A Facile Approach to Upconversion Crystalline CaF2:Yb3+,Tm3+@mSiO2 Nanospheres for Tumor Therapy

A new facile approach, namely chemical-assisted sol-gel growth (CASGG), was successfully developed to induce the formation of fine CaF2:Yb3+, Tm3+ nanocrytals within the pore channels of mesoporous silica (mSiO2) nanoparticles. A series of upconversion photoluminescent crystalline CaF2:Yb3+,Tm3+@mSiO2 nanospheres with controlled diameters from ~65 nm to ~290 nm were fabricated. All nanospheres presented sound cyto-compatibility and unique ratiometric spectral monitoring functionalities for drug release kinetics. The nanospheres with smallest dimension (UCNP-2.5, ~65nm) induced the most sustained DOX release kinetics. More importantly, the in-vitro study demonstrated that the DOX loaded UCNP-2.5 nanopheres presented the strongest anti-cancer efficacy to MCF-7 human breast cancer cells due to its stronger penetration ability to cell nuclei due to the size effect.

Alizarin Complexone Functionalized Mesoporous Silica Nanoparticles: A Smart System Integrating Glucose-Responsive Double-Drugs Release and Real-Time Monitoring Capabilities

The outstanding progress of nanoparticles-based delivery systems capable of releasing hypoglycemic drugs in response to glucose has dramatically changed the outlook of diabetes management. However, the developed glucose-responsive systems have not offered real-time monitoring capabilities for accurate quantifying hypoglycemic drugs released. In this study, we present a multifunctional delivery system that integrates both delivery and monitoring issues using glucose-triggered competitive binding scheme on alizarin complexone (ALC) functionalized mesoporous silica nanoparticles (MSN). In this system, ALC is modified on the surface of MSN as the signal reporter. Gluconated insulin (G-Ins) is then introduced onto MSN-ALC via benzene-1,4-diboronic acid (BA) mediated esterification reaction, where G-Ins not only blocks drugs inside the mesopores but also works as a hypoglycemic drug. In the absence of glucose, the sandwich-type boronate ester structure formed by BA binding to the diols of ALC and G-Ins remains intact, resulting in an fluorescence emission peak at 570 nm and blockage of pores. Following a competitive binding, the presence of glucose cause the dissociation of boronate ester between ALC and BA, which lead to the pores opening and disappearance of fluorescence. As proof of concept, rosiglitazone maleate (RSM), an insulin-sensitizing agent, was doped into the MSN to form a multifunctional MSN (RSM@MSN-ALC-BA-Ins), integrating with double-drugs loading, glucose-responsive performance, and real-time monitoring capability. It has been demonstrated that the glucose-responsive release behaviors of insulin and RSM in buffer or in human serum can be quantified in real-time through evaluating the changes of fluorescence signal. We believe that this developed multifunctional system can shed light on the invention of a new generation of smart nanoformulations for optical diagnosis, individualized treatment, and noninvasive monitoring of diabetes management.

A layered drug nanovehicle toward targeted cancer imaging and therapy

A layered drug nanovehicle with superior anticancer performance was fabricated via the co-intercalation of doxorubicin (DOX) and folic acid (FA) into the gallery of layered double hydroxides (LDHs), which can be potentially applied in medical imaging/therapy.

Doxorubicin-conjugated CuS nanoparticles for efficient synergistic therapy triggered by near-infrared light

A CuS–DOX NP drug delivery system was synthesized by conjugating carboxyl-functionalized copper sulfide nanoparticles (CuS NPs) and DOX through hydrazone bonds. The platform exhibits high in vitro and in vivo anti-cancer efficacy due to the combined chemo- and photothermal therapeutic effect upon 808 nm laser irradiation.

Diketopyrrolopyrrole-based ratiometric fluorescent probe for the sensitive and selective detection of cysteine over homocysteine and glutathione in living cells

A new fluorescent probe (DPP-AC) based on diketopyrrolopyrrole with an acrylate group was designed and synthesized for the sensitive and selective detection of biological thiols.